Fitting instructions - U4016 (COAT RACK 200)

COAT RACK 200 ...

PRODUCT DETAILS, TECHNICAL DETAILS AND FITTING INSTRUCTIONS

R5 40 mm

m

m 5

m R5

m

27

200 mm

150 mm

5

30 mm

R8

40 mm

23,5

5

m

m

100 mm

A

4,5

2

8

2

D

frostdenmark.com

300 mm

113 mm

263 mm

16

COAT RACK 200 with bar and 2 hooks Aluminium / Stainless Steel Height: 150 mm Width: 200 mm Projection: 300 mm Shelf Thickness: 4 mm Design: Bønnelycke mdd.

Manufacturer: FROST A/S

Matt Black / Polished Stainless U4016-B

Matt Black / Polished Copper U4016-CB

Matt Black / Polished Gold U4016-GB

Matt White / Polished Stainless U4016-W

Matt White / Polished Copper U4016-CW

Matt White / Polished Gold U4016-GW

CLEANING AND MAINTENANCE Surfaces should be cleaned with a microfiber cloth, glass cleaner or other non abrasive and gentle agents.

Attention: Never use solvents or aggressive household cleaners like bleach, acids (e.g. descalers) or ammonia-based bathroom cleaner to clean the product. Steel wool and hard brushes can permanently damage the surface of the steel.

EXCLUSION OF LIABILITY FROST accepts no liability whatsoever for damage to persons or property that occurs or has occurred as a result of improper installation or maintenance, particularly if the safety instructions and other points to note listed are not or have not been observed in full.

WARNING AND HAZARD NOTICES Improper mounting or use can lead to accidents and serious injuries.

2

WWW.FROSTDENMARK.COM

Matt Black / Polished Black U4016-BB

A

B

A

D 60

IN THE BOX

2x

2x

Ø8x38

Ø5x40

B

A

C 2x

C

D

2x

2x

Ø4x39

Ø6x30

screws.

D

A

B

C

HOOK

A

E 4: Drill the F marked holes G STEP and insert the two 2x 2x the coat rack A Slide B wall2xplugs. back on to the 60 mm mounting bare A .

A Ø5x40

Ø8x38

D

B

Use the two2x C wall plugs 2x and 2x 60 mm

D

STEP as illus mount

B

STEP 5: Secure the coat rack with the H brass A inserts and F screws. Place the G hooks on the brass inserts.

E

A onC B onto the STEP 2: Slide the Coat Rack D STEP 1Ø4x39 : Fix the mounting the wall as HOOK bare illustrated. Use the two C wall plugs and D screws. mounting bare A .

A the Coat Ra BOX STEP 2: Slide STEP : 6Fix the the mounting on the as E 4: Drill IN F THE STEP the markedGholes and insert the two E H brass STEP 5: 1Secure coat bare rack Awith thewall 0m STEP 6: Fix the D Use m the two C wall plugs and D screws. mounting bare A . illustrated.

IN THE BOX A

STEP 2: Slide the C mounting bare A .

STEP 2: Slide the Coat Rack B ontoDthe bare A on the wall as B STEP 1: Fix the mounting A STEP 1: Secure mounting bar A on the wall as illustrated.

C F D the G mounting bare A . illustrated.

UseDthe two C E wall plugs and screws.

A

IN THE BOX

mm

STEP 1: Fix the mounting bare A on the wall as B C illustrated. Use the two C wall plugs and D screws.

IN THE BOX

Ø6x30

2x plugs. Slide 2x the coat2x wall rack B back on to the B 60 mounting bare A . m

2x

inserts and F screws. Place the B A C the brass inserts.

G

hooks on

with the allen ke

m B onto B onto 2:the Slide the Coat Rack the the placement STEP 3: Mark theholes placement of the two screw holes Pon 1: the Fix wall the mounting bare A2: Slide on thethe wall as Rack STEP STEP Coat STEP 3: Mark of the two screw as C D E F G Ø4x39 HOOK Ø8x38 Ø5x40 Ø6x30 B C bare A . 2x as illustrated. slide the coat rack B back off the rated. the two C mounting wall plugsbare and AD . screws. mounting 2x D screws. as illustrated. slide the coat rack back off the ugs andUse B 2x 2x 2x B A bare A . of two screw holes as illustrated. mounting bare the A STEP .

3: Mark the placement STEP 4:D Drill the Emarked the two H brass STEP 5: Secure the coat rack with STEP 2: Slide the Coat Rack Bholes ontoand the insert mounting bar EA mounting .

STEP 6: Fix the G hooks by tightenin C F G 2xwall

plugs.

Slide the 2x 2x coat rack 2x mounting bare A .

B

back 2x on to the Ø8x38

Ø5x40

A. A G B off the mountingwith slide the coat bar the F screws. inserts and Then Place therack allen key B hooks on Ø4x39 HOOK the brass inserts.

Ø6x30

STEP 4: Drill the marked holes and insert the two E B B Ø4x39 HOOK Ø5x40 Ø6x30 wall plugs. Slide the coat rack B back on to the A mounting A .

STEP 4: Drill the marked holes and insert the two STEP 5: Secure the coat rack with the A E bare Ø8x38

A

wall plugs. Slide the coat rack mounting bare A .

B

back on to the

inserts and F60screws. Place the m B the brass inserts.m

G

H

STEP 5: Secure the coat rack with the H brass inserts and F screws. Place the G hooks on D the brass inserts. brass STEP 6: Fix the G hooks by tightening

hooks on

E

D

A

with the allen key 60

C

J

.

Ø4x39

Ø6x30

HOOK

Ø8x38

Ø5x40

Ø6x30

Ø4x39

I

G READ set screws F

F

C

B D A on the wall as B onto F the G STEP 3: Mark the placement of the two screw holes C 2: Slide the D Coat Rack E G A on the wall as B ontoFthe STEP STEP 3: Mark the placement of the two screw holes STEP 1: Fix the mounting bare G 2x 2x 2x A .

2x 2x bare as illustrated. slide theEcoat rack plugs and D screws. mounting B back off the A A 2x 2x 2x B 2x bare 2xA . as illustrated. slide the coat rack B back off the illustrated. Use the two C wall plugs and D screws. mounting 60 mounting bare A .

F mm Ø5x40

STEP 6: Fix the G with the allen key

H

I

C 2: Slide D the Coat D E STEP Rack

Ø8x38 C

.

A

mm

mounting bare

J

A

.

G

H

HOOK

F

STEP 4: Drill the marked holes and insert the two H 5: STEP holes 5: Secure the coat rack Ewith the brass I set STEP Fix the the hooks by tightening STEP 4: DrillE the marked and insert the two STEP Secure the coat rack6:with G hooks STEP 6: Fix thescrews I HG brass B F G hooks wall plugs. Slide the coat rack B back on the SlideB the inserts and BF back screws. hooks and on F screws. walltoplugs. coat rack on toPlace the the G inserts Place the with the allen key Jon . with the allen key J .

G E E STEPmounting 4: Drill the holes and insertmounting the twobare wall plugs. coat rack with the H brass I G inserts and F screws.

A . the thethe brass inserts. baremarked A . brass inserts. STEP 5: Secure A F G Slide the coat rack B back on to the mounting bar A .

PlaceEthe G hooks on the brass inserts.

F G H F I H G E H brass EP 5: Secure the coat rack with H brass h the I set screws G hooks READY READY TO USE G STEP 6: FixI the by tightening G hooks by tightening TO USE STEP 6: the Fix the set screws B F B G hooks rts and Fonscrews. the hooks with the allen key J .

D Place with theG allen keyonJ .

D H brass inserts.

A 60

A

mm

C B

G

F

F

2x

E

OOK

with the H brass G hooks by tightening I set screws READY TO USE 6: Fix the wo E STEP 5: SecureSTEP the coat rack with the H brass STEP 6: Fix the G hooks by tightening e G hooks on with thePlace allenthe key GJ hooks . e inserts and F screws. on with the allen key J .

F

F the brass inserts.

G

STEP 6: Secure the G hooks by tightening I I allen key J .

G G

F

I

set screws with the

G

F

I

set screws H

H

READY TO USE

READY TO USE

G

F

2

G

G

F

H

B

F

G

I

G

E

I

F

F

I

I

G

G

F

2

G

H

2

2

WWW.FROSTDENMARK.COM

3

FROST A/S

Headquarter & Showroom Bavne Allé 32 8370 Hadsten Denmark +45 8761 0032 info@frost.dk

Flagship Showroom Christian IX’s Gade 5 1111 Copenhagen Denmark +45 5172 6432 showroom-cph@frost.dk

frostdenmark.com We are also to be found as frostdenmark on facebook, Instagram, Pinterest and LinkedIn