Fitting instructions - U4003 (COAT RACK 200)

8

7

6

5

4

3

COAT RACK 600 ...

PRODUCT DETAILS, TECHNICAL DETAILS AND FITTING INSTRUCTIONS

R5 16

40

m

m

50 mm

263 mm

300 mm

255 mm

Ø10 mm

25,5

30

4,5

2

8

R5

16

600 mm 516 mm

150 mm

5

500 mm

250 mm 500 mm

8

7

6

5 frostdenmark.com

4

3

COAT RACK 600 with bar and 4 hooks Aluminium / Stainless Steel Height: 150 mm Width: 600 mm Projection: 300 mm Shelf Thickness: 4 mm

Matt Black / Polished Stainless U4003-B

Matt Black / Polished Copper U4003-CB

Matt Black / Polished Gold U4003-GB

Matt White / Polished Stainless U4003-W

Matt White / Polished Copper U4003-CW

Matt White / Polished Gold U4003-GW

CLEANING AND MAINTENANCE Surfaces should be cleaned with a microfiber cloth, glass cleaner or other non abrasive and gentle agents.

Aention: Never use solvents or aggressive household cleaners like bleach, acids (e.g. descalers) or ammonia-based bathroom cleaner to clean the product. Steel wool and hard brushes can permanently damage the surface of the steel.

EXCLUSION OF LIABILITY FROST accepts no liability whatsoever for damage to persons or property that occurs or has occurred as a result of improper installation or maintenance, particularly if the safety instructions and other points to note listed are not or have not been observed in full.

WARNING AND HAZARD NOTICES Improper mounting or use can lead to accidents and serious injuries.

2

WWW.FROSTDENMARK.COM

Matt Black / Polished Black U4003-BB

B

A

A

28

0m STEP 1: Fix the mounting bare Aon the wall as m C D illustrated. Use the two wall plugs and screws.

IN THE BOX B

60

B

IN THE BOX

IN THE BOX A

D

mm

STEP 2: Slide the Coat mounting bare A. 60 m

m

B

B STEPA2: Slide the Coat Rack onto the STEP 1: Fix the mounting bare Aon the wall as STEP 1: Fix the mounting on the wall as illustrated. Use the AD C G bare C E plugs and F screws.

D mounting bare A. illustrated.

Use the two wall

B

4x

IN THE BOX

60 m Ø5x40m

BC

D

4x

4x

Ø8x38

Ø5x40

C

wall 2x plugs and

D 2x

280 screws. m m

A

B

B

A D the mounting bare STEP Ø4x39 1: FixHOOK

60 m

Ø4x39

Ø6x30 60

Ø6x30

60 m

D

mm

280

m

HOOK

A

mm

B STEP 2: Slide the Coat Rack onto the STEP 3: Mark the placement of the two screw holes unting bare Aon the wall as B the Crackholes C D the Coat ERack F the STEP 2: Slide onto 3: Mark placement of thethe two screw he wall as G STEP 4: Drill marked holes and insertSTEP the two E the STEP H 5: Secure coat with the brass 60 C D A. mounting bare as illustrated. slide the coat rack off the wo wall plugs and 4x screws.

B B mm back 2x 4x 2xplugs. Slide 2x the coat rack G D A. wall mounting bare asthe illustrated. slide the coat rackFscrews. back off the d screws.

B B back on 2to inserts and Place the hooks on A 80 mounting bare A. A mm Amounting bare A. the brass inserts. mounting bare C B C A. D E F G

Ø8x38

Ø5x40

4x

4x

Ø4x39

Ø6x30

A

Aon STEP 2: Slide th m the wall as C D mounting bare illustrated. Use the two wall plugs and screws.

E 4: Drill the F marked holes G and insert the two STEP E H STEPB 5: Secure the coat C rack with the brass 280 D 60 Aon the wall as B A 2: Slide the Coat 2x Rack the STEP bare 2x 2x 1: Fix the mounting m G Bmm on wall to the F screws. Place the inserts and STEP hooks on onto m A plugs. Slide the coat rack back C D the brass inserts. mounting bare A. Use the two wall plugs and screws. mounting illustrated. bare A.

Ø8x38

A

IN THE BOX

two 2x

4x

STEP C illus as mount

HOOK

A

2x

2x 60 m

2x

A

m

B STEP 6: Fix the with the allen key

D

6

0m A mthe placement of the two screw holes as illustrated.

A . STEP 5: Secure B onto STEP Mark STEP 4:D Drill marked andthe insert theØ5x40 twobareEØ6x30 H the3:coat rack with the brass STEP 2: Slide the the Coat Rack holes mounting STEP 6: Fix the Ghooks by tightening Ø4x39 HOOK Ø8x38 C E F G BC B A. the Place coat the rack barethe Gback B B on2xto the F screws. inserts and slide hooks onoff the mountingwith 4xwall plugs.

4x Slide the 2x coat rack2x back allen key J. B STEP 4: Drill the marked holes and insert the two E H STEP 5: Secure the coat rack with the brass STEP 6: Fix the Ghoo D 280 60 the brass inserts. mounting bare A. A m m

wall plugs. Slide the coat rack

mB on to the back

inserts and

F screws.mPlace

the

G hooks on

with the allen key

B STEP Ø6x30 2: Slide the Coat RackHOOKbare onto STEP 3: Markthe thebrass placement the wall asØ8x38 mounting .

Athe Ø4x39 inserts. of the two screw holes Ø5x40 B STEP onto the STEP Mark placement of 6the two screw holes unting barescrews.

DAon the wall asmounting bare A. 2: Slide the Coat Rack as illustrated. slide3:the coatthe rack back off ugs and B 0the mm 280 the brass STEP 4: Drill the marked holes and insert the two E H STEP 5: Secure the coat rack with I screws 6: Fix the Gback hooks by tightening set E slideSTEP mm bare C D mounting bare A. as illustrated. the coat rack wo wall plugs and screws.

B A off the A mounting .

Dwall plugs. Slide the coat rack back G B on to the inserts and Fscrews.BPlace the hooks on with the allen key J. mounting bare A. C C D E F G Aon

mounting bare

A.

4x

mm

A

C 4x

60 m

B

the brass inserts.

D

E B

4x

A

F

2x Ø8x38

4x

G

Ø6x30 B 2x

2xØ5x40

B

m

2x

2x

Ø4x39

EHOOK

2x

60 m

m

J.

READ

G

F

H

C H

STEP 4: Drill the marked holes and insert the two E H STEP 5: Secure the coat rack with the brass STEP 6: Fix the F G G B wall plugs.

Slide the coat rack back on to the F screws. Place the inserts and hooks on with the allen ke Ø4x39 HOOK Ø8x38 Ø5x40 Ø6x30 C C mounting bare A. the brass inserts.

STEP 4: Drill the marked holes and insert the two E H STEP 5: Secure the coat rack with the brass STEP 6: Fix the Ghooks by tightening E 5: Secure the coat rack with the H brass inserts and F screws.

D STEP 4: Drill the marked holes and insert the two EE wall plugs.

STEP G B wall plugs. Slide the coat rack back on to the inserts and Fscrews.

Place the hooks on with the allenHkey J. H B back on to the mounting bare A .

G Slide the coat F mounting bare rack A. the brass inserts.Place the hooks on the brass inserts.

F G G B A A H rack with the brass E I screws Ghooks by tightening READY TO USE STEP 6: Fix the set mcoat m brass H I screws READY TO USE STEP 6: Fix the Ghooks by tightening set H G s. Place the hooks on J with the allen key .

I ks0 mon F with the allen key J. G m G B 60 m

STEP 6: Fix the m

withC the allen key C

hooks by tightening

READY TO USE

set screws

J.

EREADY TO USE H th the brass I screws STEP 6: Fix the Ghooks by tightening set H coat rack with the brass I screws READY TO USE STEP 6: Fix the Ghooks by tightening set G hooks on with the allen key J. G . Place the hooks on J with the allen key .

STEP 6: Fix the allen key J .

G

H

F

G

F

hooks by tightening

G

I

E

set screws with the

G

READY TO USE G

F

G

H G

F

H

H

H

2

F

F

2

H WWW.FROSTDENMARK.COM

3

FROST A/S

Headquarter & Showroom Bavne Allé 32 8370 Hadsten Denmark +45 8761 0032 info@frost.dk

Flagship Showroom Christian IX’s Gade 5 1111 Copenhagen Denmark +45 5172 6432 showroom-cph@frost.dk

frostdenmark.com We are also to be found as frostdenmark on facebook, Instagram, Pinterest and LinkedIn