Issuu

Design Guidelines

VERSION

A message from Brookhaven Our vision for Brookhaven is to be a place where families thrive. This vision underpins the masterplanning and design work that goes in to making Brookhaven somewhere people will want to live, both today and in the future. A masterplanned community like Brookhaven brings together and seamlessly coordinates a number of different factors or ingredients to make it successful. Some of these include: Working with the wonderful natural landscape – to enhance and feature this as part of all residents’ experience of living at Brookhaven. This includes retaining mature trees wherever we can and making waterway and wildlife corridors accessible through multi-use trails. Working in partnership with Council and other community providers to deliver community parks and activities that provide health, wellbeing and learning opportunities. This work is supported by a dedicated Community Development Manager. Ensuring that a consistent and enjoyable environment for all is created, maintained and enhanced. This last point is made possible through the provision of the Brookhaven Design Guidelines and a design approval process for all homes designed and built in Brookhaven. The Design Guidelines encourage a cohesive streetscape while promoting variety in house design that contributes

to creating a neighbourhood that is visually interesting, environmentally conscious and is of a consistent high quality. There are a number of benefits to having these Brookhaven Design Guidelines in place. They provide certainty to all future residents and property owners about the standard of housing and environment that is being created. They will assist in ensuring your home is a comfortable, healthy and environmentally conscious – through simple measures like choosing a different roof colour. They result in everyone who owns a property in Brookhaven being responsible for and playing a role in ensuring Brookhaven achieves a strong neighbourhood character. The Brookhaven Design Guidelines form part of the sale contract for land at Brookhaven and are enforceable through this contract. The obligations in the Design Guidelines also pass on to future owners – ensuring a consistent standard is maintained. We believe these Design Guidelines are an important and essential part of making Brookhaven a success – today and in the future. And that this will ultimately contribute to protecting and enhancing values and ensuring Brookhaven is a place where families can thrive.

Design approval process This document is to be used as a guide for the achievement of the Brookhaven project vision. Design innovation over and above the requirements outlined within this document is encouraged, and we welcome the opportunity to discuss how design innovation can correlate to quality housing and living outcomes. In order to construct your home, you must apply and have an application package approved by the Design Review Committee (DRC). Design Approval by the DRC does not constitute a building approval or compliance with building regulations. Upon obtaining Design Approval from the DRC, a building permit must be obtained from the local Council or a private Building Certifier before construction can commence.

THE PROCESS The DRC will endeavour to assess proposals in the shortest possible time, generally within ten business days of receiving all required information for the application. Approved plans will be stamped approved, and returned to the applicant or their agent. The progress of the home will be monitored by the DRC to ensure that it conforms to the approved design.

APPLICATION FORWARDED TO THE DRC

PLANS ARE AMENDED OR FURTHER INFORMATION PROVIDED

APPLICATION REVIEWED BY DRC IN 10 BUSINESS DAYS

APPLICATION DECLINED OR FURTHER INFORMATION REQUIRED

APPROVAL GRANTED

PLANS TO BE SUBMITTED FOR BUILDING APPROVAL TO LOCAL AUTHORITY FOR BUILDING CERTIFIER

2 1 3 2

5 4

3 7

FRONT STREET FAÇADE

SECONDARY STREET FAÇADE

EXTERNAL MATERIALS & FINISHES

ROOF MATERIALS AND FORM

VARYING FRONT FAÇADES

FAÇADE CONSIDERATION

ROOF MATERIALS AND FORM

Duplication of façades will not be permitted side by side. Variations of the following elements are necessary: • Roof form • Entry design • Colours and materials • Window configuration

A corner lot facing a secondary street or that has a common boundary to a park or reserve must be addressed in the same manner as the primary street façade.

CONTEMPORARY QUEENSLAND ARCHITECTURE AND DESIGN

INCLUSION OF EAVES

Eaves are required to be a minimum of 60% of the front façade.

2 WALL LENGTH Wall length is not to exceed 6m before it projects or is recessed by a minimum depth of 450mm, accompanied by a change in eave line.

HABITABLE ROOMS

Dwellings must provide at least one habitable room facing the street, for example a bedroom or living room.

COVERED ENTRY

Dwellings must incorporate an entry porch with its own roof with a minimum depth of 1.5m and not less than 4m2 in size.

PASSIVE SURVEILLANCE

The façade area facing the street or public for passive surveillance. A minimum of 20% is required (excluding front and garage doors).

INCLUSION OF EAVES

Contemporary design is to be reflected in all homes. Natural earthy tones to reflect the natural surroundings of the community are encouraged (Federation and Heritage design and colours are not permitted).

Eaves are required to be a minimum of 60% of the secondary façade.

WALL LENGTH Wall length is not to exceed 8m and must incorporate an eave change, and a veranda or porch that is recessed or projects by a minimum depth of 450mm.

DIRECT PARK FRONTAGE LOTS Lots 1073, 1074 & 1075 have direct park frontage and require a high level of presentation due to the unique location. • Dwellings on these lots must be double storey. • The front facade of the dwelling, including the covered entry, must address the park. • Fencing to the park boundary will be installed by the developer and must not be altered. • Side boundary fencing must finish at the front building line and cannot extend to meet the park boundary fencing. • Driveways will be installed by the developer. If these are to be altered or extended, the same material must be used: exposed aggregate in colour "Boral Canvas" with 5mm stone "Boral River Red".

EXTERNAL FINISHES

A minimum of 2 materials and 2 colours is required for the Front and Secondary Street Facades, with not more than 60% of any one material or colour. Materials and Finishes - Permitted: • Brickwork (limited to 30% of the facade) • Rendered or bagged and painted brick • Natural timber (painted or stained) • Stone Materials and Finishes - Not Permitted: • Double height bricks • Unfinished commons brick • Reflective finishes including metal sheeting • Bright finishes and colours • Unfinished materials of any kind Mortar for all brickwork is to be coloured white, off white or blended to match the colour of the brick. Plain and grey mortar is not permitted.

SUSTAINABILITY Source materials with third-party certifications to ensure the environmental and social impact is minimised. For example, look for FSC certified timber. The use of Merbau timber is not permitted as it is an endangered species and is at risk of extinction within the next 35 years.

Roofing must be of a scale and form representing Contemporary Queensland Architecture and Design. Roof materials are to consist of COLORBOND® Custom Orb sheeting or Flat Profile roof tiles.

HIP ROOF

Maximum of 30 degrees and a minimum of 20 degrees.

SKILLION ROOF Maximum of 15 degrees and a minimum of 5 degrees.

ROOF FINISHES AND COLOURS

Unfinished and highly reflective materials and vibrant colours are not acceptable. Light coloured roof materials are recommended to keep your home cooler during summer months. We recommend selecting roof materials with a Solar Reflective Index (SRI) above 50. Refer to Appendix B for examples.

LETTERBOX 3

LETTERBOX FINISH

Letterboxes are to complement the style of the dwelling and have a rendered finish or timber with metal insert. Letterboxes on poles are not permitted.

SIDE AND REAR FENCING

Fencing to the side and rear boundaries is to be a minimum of 1.8m in height. The side fencing returns and gate must be set back a minimum of 1.0m from the front building line and positioned to provide screening to utilities and rubbish bins, where applicable. Acceptable styles: • horizontal or vertical hardwood palings, stained • horizontal or vertical pine palings, painted to match the dwelling or painted dark grey/ black to minimise the visual impact to the street • aluminium battens

CORNER LOT FENCING Feature corner fencing to the secondary street frontage is required on corner lots, as identified in the land sales contract. The feature corner fence is a ship-lapped timber paling fence with capping rail and 100 x 100mm hardwood timber feature posts, painted black where visible from the road. Feature corner fence Type A is to be installed in instances where retaining walls are absent or they are less than 1.0m high. In these instances the fence is 1.8m high. Feature corner fence Type B is to be installed in instances where retaining walls are equal to or greater than 1.0m high. In these instances the fence is 1.5m high to reduce the visual impact to the street. Refer to Appendix D for the fence detail.

FENCING

MATERIALS

Coloured metal sheeting, COLORBOND®, and/or highly reflective materials and colours are not acceptable to any boundary.

FRONT FENCING

Fencing to the front is to be transparent and consist of a maximum of 1.2m high open style coloured metal tube fencing (transparent pool style panels) complemented by stained hardwood timber posts a minimum size of 100mm x 100mm or rendered masonry piers.

BRACKETS Brackets have been provided on all developer installed retaining walls for ease of fence installation where appropriate. Developer installed retaining walls are located wholly within the downside lot in accordance with Council requirements.

DEVELOPER FENCING Developer installed fencing is to be maintained to the standard by which it was constructed and not altered or damaged in any way.

DRIVEWAYS DESIGN CONSISTENCY Garages and carports must include roof design features consistent with the form and materials of the main dwelling.

6 PERMISSABLE TYPE Lots between 10m and 12.49m wide are to be designed with a single or tandem garage or in accordance with Specific Development Controls A. Double garages are permitted on double storey dwellings where the second storey projects 1m forward of the garage wall.

7 DRIVEWAY MATERIALS Driveway Materials - Permitted: • Exposed aggregrate • Coloured concrete (except light grey) • stamped concrete • stencilled concrete Driveway Materials - Not Permitted: • plain concrete • asphalt All driveways are to be sealed and treated in accordance with manufacturers's instructions to avoid deterioration.

DRIVEWAY STANDARD Driveways and crossovers are to be in accordance with Logan City Council requirements. Driveways must be offset a minimum of 500mm from the side boundary to allow for buffer planting.

DRIVEWAY COMPLETION Driveways and crossovers are to be completed prior to occupation of the dwelling.

RETAINING WALLS AND EMBANKMENTS

CONSTRUCTION OBLIGATIONS

As viewed from the street or public space:



continuous and completed within the time provided in

Limited to a maximum of 1.5m in height before use of a

the Contract.

0.5m wide landscape terrace is required. 

Retaining wall materials are to consist of stone or



Must not be constructed from timber sleepers, unfinished masonry block, or commons brick.



The consent from the adjoining property owner should

overflow of rubbish to site and surrounding areas. 

Maintain site cleanliness at all times.



Dumping of soil and rubbish on any sites will not be tolerated and will be reported to the local authority.

be obtained where retaining walls are closer than 0.6m



Provide a bin or enclosure for the duration of construction and ensure it is emptied regularly to avoid

masonry. 

Construction of the dwelling and external works must be

from the boundary.

TELECOMMUNICATIONS AGREEMENT

Full details of heights, materials and location of all



An agreement has been entered into with OptiComm

retaining walls and embankments are to be submitted

Co Pty Ltd to supply the project with a broadband fibre

for approval.

optic cable n etwork.

Developer installed retaining walls are not to be altered



or removed without consent. Please discuss proposed retaining walls with your adjoining neighbour prior to construction to ensure that the height of the retaining is appropriate to suit the finished ground levels on adjacent blocks.

To enable connection to the OptiComm network you must wire your home in accordance with the Brookhaven OptiComm Cable Entry Guide.



A choice of retail service providers utilise the OptiComm network. Further details are available on the OptiComm web site.

Appropriate approvals are to be obtained where required from the Local Council or regulatory body.

www.opticomm.net.au/my-connection/find-a-service-provider/

SHEDS AND OUTBUILDINGS



Must not be visible from the street or public space.



Any shed or outbuilding must not be attached to the



and connect a traditional aerial during construction of

ANCILLARY ITEMS & GROUND MOUNTED SERVICES



Heating and cooling units.



Garbage and refuse bins.



Clothes and washing lines.



Pool, spa and pumps.



Satellite dishes and aerials.

The OptiComm network at Brookhaven does not have provision for free to air TV. Builders will need to install

main dwelling.

Ancillary items, ground mounted equipment and services are to be screened where visible from the street or public space and include but not limited to:

A connection fee may be required prior to connection which will be paid by the developer.

the property. NATURAL GAS 

An agreement has been entered into with APA to supply the project with natural gas.



A range of retail service providers utilise the APA natural gas network, with no restrictions on your choice of provider.



Natural gas appliance and hot water system selections are to be made with your builder.

WATER METERS 

A water meter application is to be made to Logan Water for installation of the water meters by the home owner/builder.

GARAGES, SITE COVER, POS, WALL LENGTHS

Building Setbacks

Preferred Garage Location

Along built to boundary wall or otherwise indicated on the Plan of Development

Mandatory Garage Type

Single, Tandem Double will only be permitted where; â€˘ Double Storey Dwelling; or â€˘ Complying with Specific Development Controls A.

The following information is provided as a guide to assist with locating a home on the lot, and provides a summary of the key residential design and siting requirements in relation to the range of lot types proposed within Brookhaven. ALLOTMENT SETBACKS TABLE

Maximum Building Height

Allotment Type

Detached

Allotment Width

10.00 - 12.49m

12.50 - 13.90m

Site coverage does not exceed 60% of the total site area except where covered private open space is proposed. The total site coverage does not exceed 70% of the total site area. Note: Eaves, porticos, gatehouses, hoods, and landscape structures are not part of the site coverage.

Private Open Space (POS)

Minimum 16m2 at ground level (min. dimension 4m or where applicable the width is in accordance with the approved Plan of Development) is retained for outdoor recreation. The area has a maximum gradient of 1:10.

Maximum Length of Built to Boundary Wall

Up to 15m in length or 50% of the property boundary, whichever the greater, and does not include; a) Windows or other openings; and b) Is not greater than 3.5m in height where located on the boundary.

BUILDING ENVELOPE First Floor Setback (min)

Ground Floor Setbacks (min)

First Floor Setback (min)

Ground Floor Setbacks (min)

First Floor Setback (min)

To Habital Room

4.0m

To Garage Door

5.0m

n.a

5.0m

n.a

5.0m

n.a

Projections / Porticoes / Balconies

3.0m

FRONT SETBACKS Front Setback (Primary Frontage)

Development Controls

REAR SETBACKS Rear Setback (to Habital Room)

QDC MP1.1 or MP1.2 *

1. Setbacks are as per the Allotment Setbacks Table unless dimensioned otherwise.

SIDE SETBACKS Side Setback Built to Boundary Walls (Mandatory)

QDC MP1.1 or MP1.2 *

Side Setback Non Built to Boundary Walls Side Setback on Corner Lots Secondary Frontage or Adjacent Park Space

2 Storeys

Site Cover >14.00m

Ground Floor Setbacks (min)

QDC MP1.1 or MP1.2 *

1.5m

2.0m

1.5m

2.0m

1.5m

2. Where optional built to boundary walls are not adopted side boundary setbacks shall be in accordance with the Allotment Setbacks Table for non-built to boundary walls. 3. Setbacks (including Rear and Side Setbacks in the Allotment Setback Table) are to be measured to the wall of the building/structure, which overrides the requirements of Queensland Development Code. Eaves should not encroach closer than 450mm to the lot boundary.

QDC MP1.1 or MP1.2 *

Corner Lot Building Envelope Truncation Design

2.0m

4. For the calculation of Rear and Side Setbacks as per the Allotments Setback Table for irregular shaped lots, the road frontage is to be calculated as the lot width at the garage limit (5.0m offset from the boundary), which overrides the requirements of QDC.

Please refer to diagram (1) below

5. Built to boundary walls: CORNER LOT BUILDING ENVELOPE TRUNCATION DESIGN

Lots greater Lots than greater 16mthan wide 16m wide

HOUSE LOT

ROAD PAVEMENT ROAD PA

FOOTPATH FOOTPA

a. Comply with the building design and construction requirements under the Building Code of Australia (whether two or more dwellings are constructed at the same time they may share a common boundary wall); and b. Contain no windows or openings to the side boundary. 6. Built to boundary walls can be up to 15m in length or 50% of the property boundary, whichever is greater.

NO BUILDINGS NO BUILDINGS FOOTPATH

FOOTPATH FOOTPATH ROAD PAVEMENT

NO BUILDINGS NO BUILDINGS FOOTPATH

ROAD PAVEMENT

FOOTPATH

ROAD PAVEMENT ROAD PAVEMENT

FOOTPATH

ts lessLots thanless 16mthan wide 16m wide

ROAD PAVEMENT

Double

HOUSE LOT

HOUSE LO

7. Where recessed feature walls are proposed, the protruded external wall can transcend the required minimum side setback to the primary wall, where the external project wall is: a. Windowless, b. Is a maximum of 2.4m wide, and c. Not projecting further than the roof eave.

* MP1.1 is applicable to lots < 450m2 and MP1.2 is applicable to lots > 450m2. * For corner lots the front boundary is determined to be the boundary with the shortest length.

8. Private open space is provided at ground level, that: a. Is at least 16m2 in size (excluding rainwater tanks), b. Has no dimension less than 3.0m, and c. Enables access from a living area of the house. 9. Each dwelling sited on an allotment is to provide sufficient distinction in design and materials, such as to clearly distinguishable from a neighbouring dwelling and thereby create an individual and recognisable street address. 10. A minimum 2 car spaces is to be provided per dwelling, with at least 1 space capable of being covered (parking spaces may be provided in tandem). 11. Any dwelling proposed on a 10m to 12.49m width site frontage, that is a single storey and proposes a side by side double car accommodation must comply with Specific Development Controls A. 12. Driveways are to have a maximum setback of 0.5m from the site boundary. 13. Where a dwelling is located within 2.0m of ground floor level of another dwelling, the windows of habitable rooms with an outlook to the window of habitable rooms in an adjacent dwelling provide suitable screening such as: a. Fixed obscure glazing in any part of the window below 1.5m above floor level; or b. Fixed external screens; or c. Sill heights of 1.5m above floor level; or d. In the case of screening for a ground floor level, fencing to a height of 1.5m above ground floor level. 14. Dual occupancy dwellings will not be supported.

Specific Development Controls A APPLICATION These development controls apply to all dwellings proposed on a site frontage of 10 to 12.49m width, which is a single storey and proposes a side by side double car accommodation. PERFORMANCE OUTCOMES • To provide an activated streetscape. • To provide an articulated streetscape with diversity of built form outcomes. • To provide a clearly identifiable sense of entry to all dwellings which is perceived as the dominant element in the streetscape hierarchy. • Adopts sub-tropical design principles. ACCEPTABLE SOLUTIONS 1. The dwelling shall address the road frontage with: i. A habitable space with glazed windows and/or doors orientated towards the road frontage providing outlook from the habitable room; or ii. A defined (be fencing and/or landscape) private open space area orientated towards the road frontage with a minimal area of 10m2 and a minimum dimension of 3m.

9. Carport spaces openable to the private open space may provide opportunity for extending private open space. In this instance, a batten type screen to the carport door is encouraged to promote street activation, cross ventilation and increase diversity of the streetscape elevation. 10. The dwelling shall include the following landscape outcomes: i. Generous landscaping between the road alignment and the entry/defined private open space including a minimum of 5m2 of lowplanting (with a minimum dimension of 1.50m) plus minimum of one 200lt tree as part of this approach; and ii An identifiable and separated pedestrian path with an alternative material to the driveway with ground cover surround. 11. Dwelling design is to be generally consistent with the Specific Development Controls A ‘Design Outcomes’. 12. Two of the same design Specific Development Controls A ‘Design Outcomes’ are not located next to each other. ‘DESIGN OUTCOMES’

2. The form and streetscape elevation of the dwelling shall be planned to ensure the car accommodation (garage and/ or carport) is setback further than the line of the habitable space or the defined private open space. 3. The form and streetscape elevation of the dwelling shall include varying built elements, roof profiles, eave heights and materials to assist in articulation. 4. Opening to the garage and/or carport shall be no greater than 5.5m in width.

ENTRY ENTRY

5. The entry to the dwelling shall be clearly identifiable from the road frontage by one or more of the following: i. Entry door being visible from the road frontage

ENTRY ENTRY CARPORT CARPORT / GARAGE / GARAGE

CARPORT CARPORT / GARAGE / GARAGE

STUDY STUDY SPACE SPACE

ii. Gatehouse type element addressing the streetscape

CARPORT CARPORT / GARAGE / GARAGE

GATEHOUSE GATEHOUSE

ENTRY ENTRY GATEHOUSE GATEHOUSE

iii. Landscape treatment. 6. A gatehouse shall read as an integrated part of the built form of the dwelling and shall be planned forward of the garage/ carport.

DEFINED DEFINED PRIVATE PRIVATE OPENOPEN SPACE SPACE 10m2 10m min.2 min. (3m min. (3mDIMENSION) min. DIMENSION)

DEFINED DEFINED PRIVATE PRIVATE min.2 min. OPENOPEN SPACE SPACE 10m2 10m (3m min. (3mDIMENSION) min. DIMENSION)

5.5m 5.5m FEATURE FEATURE LANDSCAPE LANDSCAPE TREATMENT TREATMENT

7. Gates and fences addressing the road alignment shall generally be 1500mm in height and no less than 50% transparency.

5.5m 5.5m 4.5m 4.5m 4m

FEATURE FEATURE LANDSCAPE LANDSCAPE TREATMENT TREATMENT

VISITOR VISITOR CAR SPACE CAR SPACE

5.5m 5.5m 4m

VISITOR VISITOR CAR SPACE CAR SPACE VISITOR VISITOR CAR SPACE CAR SPACE

8. Where two garage and/or carport doors are introduced to articulate the elevation, the door closest to the entry and/ or gatehouse may have a road alignment setback of 4.5m. In this instance, the entry and/or the gatehouse structure shall incorporate the garage/carport opening as an integrated built form element.

OPTION OPTION 1 1

OPTION OPTION 2 2

OPTION OPTION 3 3

Landscaping 1 SHEDS AND OUTBUILDINGS

SCREENING PLANTING Utilise native plant species.

BUFFER PLANTING TO SIDE BOUNDARIES

Provide connection to private open space to maximise useablilty.

3 NATURAL VENTILATION

UTILITIES

AFTERNOON SUMMER SUN

Locate away from recreational

14 SIDE FENCE

RETURNING TO HOUSE Fencing to the side boundary is to return a minimum distance of 1m behind the front façade.

LANDSCAPE FRONTAGE

LANDSCAPE FINISHES

Landscaping of at least 3m wide to the site frontage, except where the site fronts an arterial road where at least 5m is required.

Alternative materials and products may be used upon review and consideration by the Design Review Committee.

SPECIES SELECTION

15 WELCOME HOME

All landscaping (other than turf) is to consist of recommended species – Refer to Acceptable Plant Species, Appendix C.

IRRIGATION

Visual interest at entry. A green entry contributing to contemporary architectural design. 16

LARGE TREES

Two shade trees of minimum 45 litre pot size are to be planted in the front yard to enhance the front façade appeal. Planting to the front façade should integrate with the architectural theme, to add positive visual appeal to the amenity of the street and home alike.

USEFUL INFORMATION

Garden beds to a minimum of 40% of front property boundary

We encourage you to look at http://www.yourhome.gov.au/ for much more useful information on building a sustainable home that will save you money and is good for the environment.

reduced glare and protect from driving rain.

LANDSCAPE

CAPTURE NORTH-EASTERLY SUMMER BREEZES

ORIENTATION

Position service areas and limit living areas to western aspect where possible to reduce exposure to heat in summer and cold southwesterly winter winds.

PROTECT FROM COLD SOUTH-WESTERLY WINTER WINDS

TURF INSTALLATION

Turf is to be laid between the front of the building and the kerb prior to occupation to N

OVERHANGS

Position trees with large canopies to provide shade in summer and reduce glare from surrounding environment. Ensure tree locations and species optimise summer breezes.

BLURRED EDGE

Streetscape canopy to be integrated into the front landscape to ‘blur’ the distinction between private and public.

3 1

Optimise cross ventilation and natural light to keep the house cool and dry, to moderate humidity.

Provide shelter to outdoor spaces and generous

neighbours living areas.

MORNING WINTER SUN

13 SERVICES AND

Landscaping areas to be maintained to an acceptable standard. Yards are to be clean, tidy and well maintained.

CONNECTED SPACES

Maximise useable private open space where possible.

GENERAL AMENITY

POOL FENCING

12 PRIVATE OPEN SPACE

Landscaping of at least 0.5m wide between the driveway and side boundary.

Irrigation will assist in water efficiency – appropriate systems are to be installed e.g. drip irrigation.

2 3

Ensure code compliance.

Construct to a maximum height of 1.8 metres. 4

POOL TO REAR YARD

Provide appropriate compliance with pool safety codes.

SHADE TREES

SIDE BOUNDARY FENCE

Landscaping to the rear boundary is encouraged.

Position trees around private open space to provide shade during Summer. 3

8 BUFFER PLANTING TO REAR BOUNDARY

Sheds greater than 9m2 are considered an extension of the main dwelling and must satisfy the building setbacks, external colours and finish of the main dwelling. 2

Climatically Responsive Design Principles

APPENDIX A

APPENDIX B

Definitions

Recommended Roof Colours

ARTICULATION:

FAÇADE:

SETBACK:

The recess and/or projection of a wall.

Face of the building – Façade Area is calculated as a square meter measurement of the entire vertical surface of the house visible from the Street or Public Area.

The minimum distance between the wall and the property boundary line.

BUILDING LINE: The front wall line of the house.

STREET FRONTAGE:

Any fixed or opening glass panel

The front boundary of a lot that fronts the road – on a corner lot the primary street frontage is deemed the shorter side.

HABITABLE ROOM:

SITE COVERAGE: The area of the site covered by the building.

Design Review Committee.

A room used for living activities, e.g. a family room, living room, meals or bedrooms.

EAVE LINE:

PRIVATE OPEN SPACE:

The edge of the roof or parapet.

The external open areas around the dwelling that are intended exclusively for the recreational purpose of the residents.

BUILDING HEIGHT: The vertical distance between the natural ground level and the peak of the roof of the dwelling (not including antennae, or other Ancillary items). DRC:

GLAZING:

The roof colours below have been chosen for their ability to reflect up to 70 per cent of summer heat gain. Light coloured COLORBOND® sheeting or roof tiles keep cooler than darker colours. This cooler temperature can mean reduced energy costs for cooling a home or building. These are recommendations only and design approval is not contingent on the use of one the colours below.

(The lowest Solar Absorbance value in the COLORBOND steel range.)

WHITEHAVEN

SURFMIST

CLASSIC CREAM™

GALACTIC™

COSMIC™

0.23

0.32

0.34

0.39

BCA

SRI

PAPERBARK

SHALE GREY™

EVENING HAZE

DUNES

0.42

043

0.43

0.47

0.49

BCA

SRI

COVE™

WINDSPRAY

PALE EUCALYPTUS

ASTRO

RHEA™

GULLY™

0.54

0.58

0.60

0.62

0.63

BCA

SRI

= endemic species

APPENDIX C

The plant species selection should take into consideration the specific local climatic and soil conditions of the site, to ensure suitability. Planting design should utilise plant hierarchies to optimise shade, screening, ventilation and security. Planting locations are to be determined with solar access and prevailing wind direction in mind and is recommended to make use of the broad planting palette of nominated species in the following table:

Golden Penda Xanthostemon chrysanthus

Tuckeroo Cupaniopsis anacardioides

Tulipwood Harpullia pendula

Lilly Pilly Acmena smithii

Crowâ€™s Ash Flindersia australis

Queensland Maple Flindersia brayleyana

White Oak Grevillea baileyana

Spider Lily Hymenocallis littoralis

Creek Matt Rush Lomandra hystrix

Native Ginger Alpinia caerulea

Blue Flax Lily Dianella caerulea

Spoon Lily Alocasia brisbanensis

Swamp Lily Crinum pedunculatum

Fruited Palm Lily Corydline congesta

Yellow Buttons Chrysocephalum apiculatum

Lacy Tree Fern Cyathea cooperi

Spear Lily Doryanthes excelsa

Rough Tree Fern Cyathea australis

Cabbage Palm Livistona australis

Bangalow Palm Archontophoenix cunninghamiana

Foxtail Palm Wodyetia bifurcate

Grass Tree Xanthorrhoea johnsonii

Bird of Paradise Strelitzia reginae

Native Passionfruit Passiflora herbertiana

Sweet Sarsparilla

Bower of Beauty Pandorea jasminoides

Star Jasmine Trachelospermum jasminoides

Wheel of Fire Stenocarpus sinuatus

Lilly Pilly Syzygium australe

Weeping lilly pilly Waterhousea floribunda

Callistemon species

Hop Bush Dodonaea triquetra

Grevillea Species

Hovea Hovea acutifolia

Dogwood Jacksonia scoparia

Blue Tongue

Hairy Bush Pea Pultenaea villosa

Maidens Wattle Acacia maidenii

CLIMBERS

SHRUBS

Native Frangipani Hymenosporum flavum

FEATURE PLANTS

TREES

Flame Tree Brachychiton acerifolius

GROUND COVERS

Recommended Plant Species

APPENDIX D

APPENDIX E

Feature Corner Fence

Builder/Owner Design Application Checklist

FEATURE CORNER FENCE TYPE A

Please provide the following details for the submission of plans to the Design Review Committee.

Feature corner fence Type A shall be installed in instances where retaining wall is absent or is less than 1.0m high.

Submit to: brookhaven-drp@frasersproperty.com.au

Fence to be stepped to suit changes in level. Raked fences will not be accepted.

Subject line: Brookhaven Lot XX Street Name

PROPERTY DETAILS

2400 MAX

100

100 x 100MM HARDWOOD TIMBER POST PAINTED BLACK

Lot number: Street name:

100 x 25MM CAPPING RAIL

100

PROPERTY BOUNDARY

PRIVATE PUBLIC

100 x 16MM SHIPLAPPED TIMBER PALING FENCE PAINTED BLACK ON ROAD SIDE

1800

OWNERS DETAILS

75 x 50MM TREATED PINE RAILS

1950

Stage:

Current address:

Name:

Tel: Email:

ELEVATION

Please allow for 10 working days for processing and assessment on the provision that all required documentation is submitted and ensure you have checked and included the following.

SECTION

DESIGN SUBMISSION REQUIREMENTS (TICK BOX) FEATURE CORNER FENCE TYPE B Feature corner fence Type B shall be installed in instances where retaining wall is equal to or greater than 1.0m high. Fence to be stepped to suit changes in level. Raked fences will not be accepted.



Site plan (min. scale 1:200) including: setbacks from all boundaries, site levels (contours), extent of earthworks, finished floor level to house and garage, driveway access and path details, all fencing materials, location and heights.



Dimensioned floorplans (min. scale 1:100) including: window positions and roof plan.



All elevations (min. scale 1:100) including: building and wall heights, roof pitches, eave size, external fixtures, and external surface finishes.



Schedule of external materials including: colours, finishes and driveway.



Landscape plan including: letterbox, landscaping garden beds, screened ancillary items and driveway.

PROPERTY BOUNDARY

PRIVATE PUBLIC

2400 MAX

100

100 x 100MM HARDWOOD TIMBER POST PAINTED BLACK

100 x 25MM CAPPING RAIL

100

BUYER ACKNOWLEDGEMENT

100 x 16MM SHIPLAPPED TIMBER PALING FENCE PAINTED BLACK ON ROAD SIDE

1500

1624

We acknowledge we have read and understand and agree to comply with the Brookhaven Design Guidelines.

75 x 50MM TREATED PINE RAILS

Buyers Name:

Current address:

Signed: Dated:

ELEVATION

SECTION

13 38 38 brookhavenliving.com.au 33 Menora Road, Bahrs Scrub QLD 4207 Disclaimer: - An Approval issued under these Design Guidelines is NOT an approval under the requirements of the Building Act, or any other Act or Regulation. The documents provided have not been checked for compliance with any structural, health, or planning requirements, or for the suitability of the building for the use to which it may be put. Accordingly Frasers Property Australia, itâ€™s Architects, and/or its employees or representatives do not accept any responsibility for the suitability or soundness of construction of the completed Buildings or the associated site development works.