Five Farms | Design Guidelines | Littlecroft Precinct

Design and Siting Guidelines

1

Imagine somewhere with wellness at its core.

Where every decision was based around people’s wellbeing and traditional community values are combined with the latest in urban planning.

Where the area’s local farming history informs its future. Where health, happiness, prosperity, sustainability and community all come together to create a place like no other.

They are our aims here at Five Farms.

To provide a home where you can not only live, but live well.

Five Farms

1

Five Farms is a master planned residential community that is being designed and developed

by Frasers Property Australia. With wellness at its core and in order to protect your investment, we require that the development of homes maximises a high level of design and quality.

These guidelines deal with the planning and development of vacant residential lots at Five Farms, located within the City of Casey.

The principal aim of these Design Guidelines (“Guidelines”) is to create a coherent vision for the Five Farms community.

Developed to enhance the lifestyle and investment of purchasers, the Guidelines are designed to help ensure all homes at Five Farms are built to a high standard whilst encouraging a variety of housing styles and compatibility with the streetscape.

The Guidelines will assist in providing you with peace of mind, while helping to protect the value of your property.

Each individual house design should contribute to enhancing the surrounding environment and the estate.

Owners are encouraged to construct innovative and appropriately designed homes that address sustainability and complement the estate.

Building Envelopes have been designed for all allotments over 300sqm so that homes are appropriately sited, to help limit overlooking and overshadowing. These can be found in the Building Envelope Diagram in your Contract of Sale. Lots 300sqm and under are subject to the Small Lot Housing Code as designated on the Building Envelope Diagram.

Live Well

3

The Design Assessment Panel (“DAP”) will be responsible for the review and approvals of your house plans.

All proposed building works including houses, garages, outbuildings and fencing are required to be approved by the DAP in relation to these Guidelines prior to seeking a Building Permit.

Each home built at Five Farms will undergo a review by the DAP based on its adherence to the Guidelines, set-out below, and how it relates to the overall vision for Five Farms. The DAP will exercise its discretion and will approve outside of these guidelines assessed on its architectural merit.

It is important to note that Covenants or Restrictions on the Plan of Subdivision cannot be changed by the DAP and therefore must always be adhered to.

The Guidelines are subject to change at any time without notice. Building Envelope details for each lot can be found within the Building Envelope Diagram for each stage.

The Design Guidelines will cease to apply as prescribed in the Plan of Subdivision, at which the appropriate local and state government statutory regulations will continue to apply.

Our Approach

5

1. PRIOR TO BUILD

APPROVAL PROCESS

9

2. PLACING THE HOME

LOCATING

11

HOUSE ORIENTATION

11

EXAMPLE OF CLIMATICALLY RESPONSIVE HOUSE ORIENTATION AND DESIGN

12

BUILDING ENVELOPES

13

ARCHITECTURAL STYLE & FRONTAGE

15

MATERIALS

17

EAVES & ROOF

17

PARAPET WALLS

17

GARAGES & CARPORTS

18

PORCH, PORTICO & VERANDAH

19

CORNER AND REAR ACCESS LOTS (DOUBLE & SINGLE STOREY)

19

ACOUSTIC RECOMMENDATIONS

20

LETTERBOXES, RETAINING WALLS, DRIVEWAYS

23

FENCING

23

OTHER ESSENTIALS

24

LANDSCAPING

24

DESIGN GUIDELINES CHECKLIST

29

3. THE HOME

4. OUTSIDE THE HOME

Contents

7

1.

APPROVAL PROCESS

Homes must be designed in accordance with the Guidelines and approved by the DAP.

STEP ONE

Designs are to be submitted in email format to the DAP for approval as follows: • House floor plans (1:100 scale) • Elevations from four sides (1:100 scale) • Roof plan • Schedule of external materials • Completed Check List (refer Appendix A of Guidelines).

• Site plan (1:200 scale) showing: - setbacks from all boundaries - Building Envelope - external features including driveways, paths, fencing and outbuildings - landscaping

STEP TWO

When all documents are submitted (refer Appendix A) and meet compliance, allow approximately 10 working days for approval.

STEP THREE

Plans that do not comply with the Guidelines will be returned with a detailed list of non-compliance highlighted. Amended plans can be resubmitted for approval.

Any alterations made to the resubmission other than the initial non-compliance should also be highlighted on the plans or detailed in an accompanying letter.

STEP FOUR

Once approval for your house design is received, you must apply for a building permit.

A Building Permit can be applied for from the City of Casey or a Private Building Surveyor.

Prior to build

Note: Design approval from the DAP does not exempt the plans from any building or statutory regulations. Separate approval must be obtained from the relevant authorities.

Approval by the DAP does not infer compliance under the Building Code of Australia, Rescode and other applicable planning or building regulations.

STEP FIVE

Once a Building Permit has been obtained, and all legal and conveyancing requirements have been met, construction of your house may commence.

9

2.

LOCATING

HOUSE ORIENTATION

AIMS

AIMS

The careful siting of houses and garages is important for a number of reasons:

An energy smart home takes advantage of the sun’s free warmth and light. Well designed homes reduce the demand on heating and cooling.

•

Ensuring best visual presentation from the street

•

Maximising the benefits of solar access

•

Promoting energy efficiency

For the purpose of these design guidelines, a corner lot is defined as:

•

Minimising overlooking

•

having two street frontages, or

•

Respecting the privacy and amenity of neighbours

•

has a side boundary that adjoins a Walk (10m road reserve), or

•

has a side boundary that adjoins a reserve.

MUST-HAVES One dwelling only is permitted per lot. Dual occupancy and further subdivision are not allowed. This excludes those lots designated for multiple dwellings or medium density housing.

•

Maximum allowable encroachment into the front setback is 1.5m which includes eaves, fascia’s and gutters.

MUST-HAVES •

Homes at Five Farms must achieve an energy rating.

This needs to be in accordance with the Victoria Home Energy Rating System and be provided in line with obtaining a Building Permit.

•

Houses must face the front boundary and present an identifiable entrance to the street. In the case of any lot where more than one boundary abuts a road, the shortest of the boundaries which abuts a road is the front boundary. Where there is a splayed corner on a lot, that part of the boundary which is created by the splay (i.e. the corner section) shall be disregarded.

•

Dwellings on corner lots with entrances on side streets must address both frontages.

CONSIDERATIONS Where possible, houses should be sited so that the habitable rooms and private open spaces face northwards to receive maximum solar efficiency.

Protect from cold south-westerly winter winds and capture north-easterly summer breezes. With these in mind, position service areas and limit living areas to western aspects where possible.

Optimise cross ventilation and natural light to moderate humidity to keep the house cool and dry.

Provide shelter to outdoor spaces and generous eaves for diffused light, reduced glare and protection from driving rain.

Placing the home

11

EXAMPLE OF CLIMATICALLY RESPONSIVE HOUSE ORIENTATION AND DESIGN

BUILDING ENVELOPES AIMS In order to maintain standards and ensure all structures comply, construction outside of the Building Envelope is subject to approval by the DAP, and also subject to Council approval. Council approval will not guarantee the DAP’s approval unless the DAP has agreed prior to seeking Council approval.

West

East

Afternoon sun

MUST-HAVES •

Morning sun

All minimum setbacks must be as shown on the Building Envelope Diagram contained within your Contract of Sale.

•

3 – Natural Ventilation

All buildings, including garages, must be contained within the Building Envelope specified for that allotment and in accordance with the profile diagrams.

•

Optimise cross ventilation and natural light to keep the house cool and dry, to moderate humidity.

Where Build to Boundary zones exist on both sides of a lot, the construction can be erected on either side boundary. But it must maintain a minimum 1m setback to the opposite boundary.

•

Entry recesses will not be regarded as a step in the façade.

•

Side and rear setback encroachments are allowed in accordance with building regulations.

1 – Landscape Position trees with large canopies to provide shade in summer and reduce glare from surrounding environment. Ensure tree locations and species optimise summer breezes.

3

2 – Orientation Position service areas and limit living areas to western aspect, where possible, to reduce exposure to heat in summer and to cold southwesterly winter winds.

4 – Eaves

CONSIDERATIONS

Provide shelter to outdoor spaces and generous eaves for diffused light, reduced glare and protection from driving rain.

Ensure your home is designed to be well sealed and ventilated, with high levels of insulation.

4

2 1

Capture summer breezes

•

Double glazing or high performance glass is recommended wherever possible. Installing blockout curtains can also assist with keeping the home cool in summer and warm in winter.

•

Familiarise yourself with the Nationwide House Energy Rating Scheme and what it means for the thermal performance of your home. All standalone homes in Victoria must achieve at least a 6 Star rating, but the higher the star rating the more energy efficient and comfortable the home will be.

Consider the size and location of your windows. Large unprotected windows to the north and west will make your home feel too warm in summer. Large windows may also require more heating in winter to keep you home comfortable.

Protect from cold south-westerly winter winds

12

13

3.

ARCHITECTURAL STYLE & FRONTAGE AIMS For you to choose a home style that fits in with your neighbourhood.

The built form is to be contemporary that incorporates simplistic use of materials. It should also combine a mix of light weight elements with solid forms and materials.

High standards of house design will be required, and a variety of styles are encouraged. Designs should be responsive to the individual attributes of the allotment, having regard to any slope or vegetation.

Proportion, 80% of the lot frontage.

Designs that break the front of the dwelling into distinct visual elements will be supported. The inclusion of projections integral to the design and style of the dwelling are encouraged.

Although classic/traditional/historical reproduction styles are discouraged, fine examples which harmonize with the contemporary feel may be approved at the discretion of the DAP. Depending on your location throughout Five Farms, your home is recommended to include acoustic treatment.

Hamptons Style.

Front Façade Materials.

The home

Front Door Visibility.

15

MUST HAVES •

The house façades may not be the same as one within three lots either side or across the street, unless –

It is approved in writing by the DAP and/or

–

The house is part of a row of terraced homes or a medium density development.

Different façade

Different façade

3

1

2

1 Street

Same/similar façade

2

3

Same/similar façade

MATERIALS

EAVES & ROOF

AIMS

AIMS

Wall and façade materials should enhance the visual quality of streetscapes within Five Farms. The use of a combination of finishes that complement your architectural style is encouraged to add to your home’s individuality and interest.

Roofing form and controls are to provide visual interest and enhance the building design. Eaves in particular add significant appeal to your home.

•

Front entries should be clearly visible from the street and include protruding elements such as a covered verandah or portico treatment.

All external materials and colours must suit the character of the neighbourhood and be submitted to the DAP for approval.

•

Where front doors are located on the side of the dwelling, a pathway and/or covered walk way will need to be constructed to direct people to this entry.

MUST HAVES

•

• •

Your home must have habitable room windows located on the front façade and provide a clear view to the primary streetscape. They should be appropriately articulated as elements within the façade design and not comprise single highlight windows. (Highlight windows include feature windows with sills more than 1500mm above floor level.)

Different façade 3

2

1

2

3

•

Lightweight infills are not permitted above any window openings along façades directly visible from the street or public open space/reserves. Infills are permitted above garage doors where the colour matches the garage door colour.

Reflective window tints are not permitted to publicly visible façades.

•

External security blinds and roller shutters are not permitted.

•

Where a home is 13m wide or greater, at least one of the following is required: –

–

–

A setback in the front façade of a minimum 840mm. This step must be in addition to the garage; or A portico/verandah with a minimum area of 10sqm.

The porch must also have a minimum 1.2m depth at some point; or A verandah for the full length of the frontage (excluding the garage).

There is no minimum dwelling size however dwellings must be proportional to the allotment size with width.

To this end dwellings on lots 16m or less in width are required to be a minimum width of 80% of the lot width. Lots over 16m in width are required to have a minimum width of 14.5m.

CONSIDERATIONS Windows visible from a public area should be fitted with internal curtains, blinds or shutters.

16

Same/similar façade

Street

Visible side street windows must match the style and quality of the front windows.

•

•

• Same/similar façade

13m or greater frontage house with façade articulation (porch)

At least 20% of the front of your home must contrast with the main finish. The 20% is calculated excluding windows, doors, garage doors and other openings. For homes on corners and rear accessed lots, this requirement applies to all façades visible from the street.

Your front façade must include a covered verandah/porch (in. dimension of 1.2m) and a minimum of two different wall materials to add variation, detail and interest.

MUST HAVES •

All roofs must be constructed of masonry, terracotta or non-reflective metal.

•

All gutters, rain head overflows and down pipe profiles or treatments must complement the design of the home.

•

Eaves are to be a minimum of 450mm deep for those sections of roof visible from the street and must return around the front façade to a minimum of 6m.

•

Eaves are required to the whole length of the dwelling which faces a side street and must return a minimum of 4m.

•

Eaves are not required to wrap around garage walls on boundary or to parapets subject to merit.

•

Non-habitable room windows are permitted within a 6m return if the distance between the overall gutter and side boundary is less than 1m. (This does apply to side street boundaries.)

•

Changes in materials and colours are to occur at logical points deemed by the DAP. Render that terminates in the middle of a wall is not acceptable.

•

All external surfaces are to be in a finished state (painted or coated) prior to occupation of your home.

•

•

For homes on a corner and rear accessed lots, the materials and colours must continue for all façades visible to the street.

Double storey homes with a pitched roof must include a minimum 450mm eave to all sides of the dwelling on the upper storey.

•

•

Bright or fluorescent colours will not be approved, unless they are deemed complementary to the design of the dwelling at the discretion of the DAP.

•

In very rare instances, homes may be approved with one material finish, subject to design and architectural merit and at the discretion of the DAP.

A minimum roof pitch of 22.5 degrees is required unless it is a skillion, in which case it must have a minimum roof pitch of 15 degrees. Flat roofs must be concealed with a parapet if visible from any public spaces.

CONSIDERATIONS

CONSIDERATIONS Lighter coloured roofs are recommended to reduce heat island effect.

When selecting timber, look for products with a Forestry Stewardship Council (FSC) or Programme for the Endorsement of Forest Certification (PEFC) logo. This ensures that your timber has been sourced from sustainably managed forests. Avoid Merbau timbers and other endangered species.

Eaves are recommended to all sides of the home.

All materials rely on energy use in their extraction, production and installation. However, you can reduce the effect on the environment of your homes’ construction by choosing materials with a lower environmental or ‘embodied carbon’ footprint.

PARAPET WALLS

To maximise the efficiency of your solar photovoltaic panels, ensure they are facing north wherever possible.

MUST HAVES •

Any parapet wall must terminate at a logical point.

CONSIDERATIONS Free floating parapet ends are strongly discouraged.

17

GARAGES & CARPORTS

PORCH, PORTICO & VERANDAH

AIMS

AIMS

Off street parking is important to creating a welcoming community. However, much more than afterthoughts or add-ons, these buildings should complement the overall look and feel if we are to have a cohesive streetscape.

Much more than part of the entrances, these additions should be well considered to visually enhance the façade.

MUST-HAVES •

If garages are free standing and/or visible from the street, they must match the roof form and be constructed of the same materials as the house.

Your home must have a porch, portico or verandah with a minimum dimension of 1.2m which provides adequate weather protection.

•

Eaves are not required to verandahs or porticos.

•

The garage door is a major visual element of the streetscape and doors facing the street must be of a colour that complements the house.

CORNER AND REAR ACCESS LOTS (DOUBLE & SINGLE STOREY)

•

All homes must allow for double garage car accommodation where the front boundary of the allotment is 12.5m or greater.

MUST HAVES •

•

•

Garages must be constructed within the Building Envelope and sited a minimum of 5.5m from the front boundary, unless stated otherwise on the Building Envelope Diagram. This setback also applies for entry to the garage from the side street boundary.

Garage openings must not occupy more than 40% of the width of the allotment frontage. For dwellings of two or more storeys, on allotments with a frontage width of less than 12.5m, the garage opening must not exceed 25% of the area of the front façade of the dwelling. The area of the front façade will be measured from a two dimensional elevation plan of the façade excluding the area of the roof of the dwelling.

•

Double garages cannot exceed 7m in width (internally).

•

Single and double garages must be setback a minimum of 840mm from the front or building line, unless otherwise noted in the Building Envelope Diagram.

•

No roller doors are permitted.

•

Carports can only be constructed if they are not visible from the street.

•

Carports may be provided to a rear access lot provided the wall facing the laneway includes a panel lift door, is the full width of the lot and returns at least 1080mm along the side boundary.

•

A triple garage is permitted if the lot width has a 20m frontage or more. It must be setback a further 1560mm from the double garage and include additional features to enhance its appearance.

AIMS 500mm minimum driveway offset from side boundary

If your home is located on a corner, its design must positively address both the front and side streets, along with any other frontage visible from public open space areas. A consistent architectural style should be used for all visible façades.

House

Garage

driveway must stop at front property boundary and not break footpath

Where the DAP considers the dwelling design does not properly or adequately address the street corner and both street frontages, additional treatments may be required to obtain its approval.

Driveway 4m

5.5m

front building set back Footpath

MUST-HAVES •

For corner and rear accessed allotments, windows that are readily visible from the street must be consistent in style and proportion. These include windows of the front elevation, on the ground floor forward of the corner fence and on the upper storey.

•

A feature window must be provided at ground floor level to the secondary street frontage of your home within the first 4m from the front façade and provide a clear view to the secondary streetscape. Highlight windows are not acceptable.

Crossover Street driveway must taper to match width of crossover at property boundary

minimum garage set back

•

Front, side street, reserve and rear laneway facing second storey façades must incorporate a habitable room window. They should also incorporate balconies and/or additional setbacks and articulation.

•

Double storey dwellings must provide variation in materials between the upper and lower storeys to articulate the corner of both façades.

•

Articulation of some form is required to the upper floor side street elevation.

•

Double storey homes on corner lots must have a minimum 20% glazing to the upper floor that faces the secondary frontages, measured as an area of the upper floor wall elevation.

•

Upper floor windows facing a side street are to be clear glass only.

•

Design elements such as verandahs, detailing, feature windows and materials, used on the primary frontage, must continue on that part of the secondary frontage visible to the public realm.

CONSIDERATIONS It is preferable for garages to be constructed under the main roof of the house. Free standing garages need to comply with the requirements under must-haves.

18

Porch min 1.2m depth.

Double Storey Corner Treatment.

19

ACOUSTIC RECOMMENDATIONS

AREA A HOMES

AREA B HOMES

AREA C HOMES

With Bells Road being a major arterial road, it is recommended that homeowners consider including some or all of the following acoustic treatments.

Those fronting Bells Road within <50m of Bells Road extension.

Dwelling façades constructed within <80m of the Bells Road extension with direct exposure to traffic noise.

Generally, the expectation will be external façades will receive up to 90 degree angle of view of the roadway due to other building structures constructed at closer setbacks to the roadway.

Dwelling façades constructed within <80m of the Bells Road extension which are well shielded from traffic noise by structures including other dwellings or buildings associated with an independent use.

Generally, the expectation will be external façades will receive <90 degree angle of view of the roadway due to the shielding elements.

FAÇADE WALL •

External façade walls be constructed to include masonry brick veneer combined with an internal stud wall clad with 13mm plasterboard.

•

The cavity to include fibreglass insulation (min.

75mm thick x 14kg/m3) and the wall system is to be well sealed using resilient mastic (eg Sikaflex Pro.)

ROOF/CEILING

2139 2138 2137 2140 214 2136 1 2142 2135 2143 214 4 2134 2133 2145 2132 2131 2129 212 2130 8 2127212 212 6 5 2124 2123 212 2

7 41 6

41 4

2 2201

22

9

33

0

34

41

2

34

2301

2302 2303 2304 2305 2306 2307

7 33

8

32

32

32

2

32

2328

2322

2401

2402 2403 2404 2405 2406 2407 2408 2409

508 509

510

814

2433

511

816

817

815

818

2436 2435

820 831

833

832

840

839

838

835 837 836

2544 2545 2546

2547

706 707

521 520

603

611

604

612

821 822 823 824 825

843 844 845

846 846

848

849

901 902

903 904 905 906

9

714 723 722 721

630

718

738

720 719

737

632 633

621

907 908

724

631

623 622

634

940

735

939

734

938

727

43 10

•

Construction to be 40mm solid core timber door fitted with suitable acoustic perimeter seals.

•

A minimum, acoustic seals to include Raven RP10 to tops and sides of doors, combined with Raven RP38 or RP71 to door thresholds. Double doors be avoided.

4

4 10

942

937

5

4 10

6

4 10

732

936

943

731

935

944

730

728

2

4 10

1049

47 10

8

4 10

934 933

916 917 918

919

Masonry façades including brick veneer, combined with internal stud walls clad with 13mm plasterboard are preferred over light weight construction.

•

If light weight construction is adopted, facade walls are to be construction with steel studs (min. 92mm) clad internally using 1no. 13mm FR plasterboard, and externally using 9mm CFC.

•

For both the masonry and light weight options, the cavity should include fibreglass insulation (min. 75mm thick x 14kg/m3) and the wall system is to be well sealed using resilient mastic (eg. Sikaflex Pro.)

ROOF/CEILING •

To be metal deck roofing (min. 0.48mm thick) or conventional roof tile system combined with conventional building blanket incorporating insulation and sisalation.

•

Internally, the system should include a suspended ceiling constructed using 1no. 13mm plasterboard with fibreglass insulation (min. 75mm thick x 14kg/ m3) overlays.

•

The suspended ceiling system to include a 200mm air gap and be substantially unpenetrated unless penetrations are treated acoustically so as not to influence the overall performance of the system.

FAÇADE WALL •

Masonry façades including brick veneer, combined with internal stud walls clad with 13mm plasterboard are preferred over light weight construction.

•

If light weight construction is adopted, facade walls to be constructed using steel / timber studs (min. 90mm) clad internally using 1no. 13mm plasterboard, and externally using 9mm CFC.

•

For both the masonry and light weight options, the cavity should include fibreglass insulation (min. 75mm thick x 14kg/m3) and the wall system must be well sealed using resilient mastic (eg. Sikaflex Pro.).

ROOF/CEILING •

•

•

•

Conventional thermal double glazing consisting of 6mm glass, 12mm air gap and 6mm glass or single glazing comprising6.38mm laminated glass, achieving a minimum acoustic performance of Rw 31.

•

Internal rooms associated with dwellings to be considered as independent spaces with glazing should be limited in accordance with the following parameters:

Be an acoustic double-glazing system consisting of 10mm glass, 12mm air gap and 6mmglass or single glazing comprising 10.38mm laminated glass, achieving a minimum acoustic performance of Rw 33.

Internal rooms associated with dwellings should be considered as independent spaces with glazing to be limited in accordance with the following parameters: –

–

•

Can be as per conventional construction.

GLAZING

GLAZING

Glazing facing away with no angle of view of the roadway to be constructed as for Area B Homes.

Access doors to open into common ‘non noise sensitive’ corridors.

1

•

Living areas can include glazing elements on one or two façades when located on a corner, however the glazed elements should not be greater than 30% of each facade.

•

4 10

733

725 726

40 10

941

736

729

909 910 911 912 913

3 10

9 73

Bedrooms only to include a single facade which incorporates glazing. Where bedrooms are located on a corner, the second facade recommended be a solid construction without any glazed elements. The glazed sections within the single facade should not make up more than 20% of that single facade (not including second facade).

ACCESS DOOR

8

3 10

717

629

625

615

609

2548

842

5 71

6 71

628

624

614

607 608

•

626

613

605 606

9 70

712

627

610

602

28 10 29 10 30 10 31 10 32 3 1003 4 1 3 10 35 10 36 10 37 10

1 71

920

2542 2543

0 71

–

708

519

601

819 827 828 829 830

1 70

713 512

505 506 507

808 809 810 811 812 813

807

2434

2440

2439

2438 2437

504

826

2540 2541

9

2538 2539

06 10 07 10 08 10

524 523 522

803

2 70 3 70

705

525

102 101

1 2422 2423

4 70

526

103

502 501

16 10

17 10

1 10

7

52

106

834

2536 2537

5 01 41 01 31

2419 242 0 242

841 2535

3

2441

12 10

2442

2534

2510

503

802

806

2432

7 13 8 13 9 13 0 14

105

805

2430 2431

10 10 11 10

2511 2533

2410

804

2429

6

13

18 10 19 10 20 10 21 10 22 10 23 10 24 10 25 10 26 10 27 10

0 10

2507 2508 2509

2418

1

4 11

104

801 2411

05 10

2

2532

2514 2513 2512

107

03 10 04 10

20

2530 2531

2506

108

2417 2427

35

4

2515

2529

2414 241 3 2412

2426

2428

13

2504 2505

3

2517 2516

2527 2528

2415 2416

2503

6 11

2336

109

2518

13

2525

01 10 02 10

9 11

7 11

112 113

5 20

8

20

1

0

11

111

6 20

32

12 8

11

5

110

2520

2519

304

4

9

20 7 20

20

1

13

30

30

2334 2335

2315

2526

308

0

13 1 12

1 30

2

0 21

21

1 20

2317

2502 250 1 2424 2425

9

12 2

3

306 305

6

21

8 12

12

307

2333

2316

2521

0 31

1

12

2331

2332

2318

2522

31

2 3

4 21

5

21

20

2320

2524

312

313

2 11

12

5

2330

2319

2523

6

21

7 21

12

12

9 30

–

8

4 12

3

314

2329

2321

3 24

9 21 21

0

32

315

2323

2 24

7

9 31

318

1 24

22

4 32

3

317

0 24

0

0

316

9

23

1

22

1

6 2327

8

23

32 2324 232 5 232

7 23

32

33

331

6

23 3 22

2

5

6

32

7

9

5

23

32

332

Internal rooms associated with dwellings should be considered as independent spaces with glazing to be limited in accordance with the following parameters:

4

23

4 22 22

33

2309 2310 2311 2312 2313 2314

2308

5

33

4

22

8 33

3

23

5

22

7

3 34

3 33

•

2

23 6

22

6 33

Double glazing system incorporating 10.5mm VLAM Hush / 8mm air gap (argon) / 6mm glass and achieving Rw 39 may also be suitable.

1

23

3

Double glazing element be 6.5mm VLAM Hush / 10mm air gap / 8.5mm VLAM Hush. The proposed configuration should include the nominated glazing and form part of a system achieving a minimum acoustic performance of Rw 37 or,

•

2

8

4 41

2203 220

1063 1064 1065 1066

41 2205 220 4

1 40

0

23

29

1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062

3

2

930

2208 220 7 2206

41

4 40 3 40 2 40

617

2211 221 0 2209

2101

2221 222 2

0 41

1 41

618

2102

2216 221 7 2218 2219 222 0

518

2103

9

40

616

2212 221 3 2214 2215

931

2105

•

8 40 7 40 6 40 5 40

15

2104

The suspended ceiling system to include a 250mm air gap and be substantially unpenetrated unless penetrations are treated acoustically so as not to influence the overall performance of the system.

GLAZING

932

2224

928

6 2225

929

2

43

2223

8 2227222

927

2120

620

2229 222

Area A Home Area B Home Area C Home

8 42 7 42 6 42 5 42 4 9 43 42 3 1 42 2 43 42 1 0 42 0 43 42 9 8 41 41

513 514 515 516 517

1 2230

•

4

2121

2232 223

2106

8 2119

Internally, the system includes a suspended ceiling constructed using 2no. 13mm FR plasterboard with fibreglass insulation (min. 75mm thick x 14kg/ m3) overlays.

43 3

43

921 922 923 924 925 926

6 2117 211

•

5

619

2113 211 4 2115 211

To be metal deck roofing (min. 0.48mm thick) or conventional roof tile system combined with conventional building blanket incorporating insulation and sisalation.

43

2112 2111 2110 2109 2108 2107

•

FAÇADE WALL

•

–

Bedrooms can include glazing elements on one or two façades when located on a corner, however glazing elements should not be greater than 50% of each facade.

–

Living areas can include glazing elements on one or two façades when located on a corner, however gazed elements should not be greater than 50% of each recommend.

Glazing facing away with no angle of view of the roadway can be conventional single or double glazing.

Bedrooms can include glazing elements on one or two façades when located on a corner, however, the gazed elements should not be greater than 50% of each facade.

ACCESS DOOR •

Living areas can include glazing elements on one or two façades when located on a corner, however, the glazed elements should not be greater than 50% of each facade.

Be a solid core timber door well fitted to opening with minimal gaps around the perimeter and conventional weather seals.

•

If facing away with no angle of view of the roadway then they can be of conventional construction with minimal gaps around the perimeter of the door.

Glazing facing away with no angle of view of the roadway can be constructed as for Area C Homes.

ACCESS DOOR •

To be as for Area A Homes, unless doors are facing away with no angle of view of the roadway then they can be constructed as for Area C Homes.

•

Area C Home-Access Door “Solid core timber door well fitted to opening with minimal gaps around the perimeter and conventional weather seals”.

914 915

This masterplan is approximate, not to scale and should be used as a guide only. Purchasers should rely on their own enquiries and the contract for sale.

Images are artist’s impressions, indicative and conceptual only.

20

21

4.

LETTERBOXES, RETAINING WALLS, DRIVEWAYS AIMS Letter boxes are a repeating element in the streetscape.

With consistent detailing and careful selection these will help to visually link the individual homes and provide a cohesive streetscape character. With this in mind, use simple contemporary letterboxes which complement the dwelling and landscape style. The same could be said of retaining walls and driveways.

MUST-HAVES

FENCING AIMS Here at Five Farms we want to enhance the park-like character of the estate.

MUST-HAVES •

Front fencing is not permitted. For all corner lots and lots adjoining reserves there may be additional fencing requirements. All fencing is to comply with the endorsed Fencing Strategy (Hillsmeade Condition 9 – PlnA00571/19, Littlecroft Condition 5 PA21-0705).

•

Side boundary fencing is not to come forward of 1.0m plus the minimum front setback from the front boundary allotment.

•

Single post supporting letterboxes will not be approved.

•

Retaining walls forward of the dwelling are permitted where they:

•

Side and rear fencing to be 1.8m – 2.0m in height, including any capping.

– Compliment the style and colour scheme of the home

•

Fencing is to be COLORBOND® Ironstone®

– Are no higher than 600mm

•

Fences on corner lots (as defined under House Orientation page 13) must terminate at least 6m back from the front façade. They must also return to the dwelling to allow for corner treatment.

•

For corner lots where the lot depth is 21m or less, the length of fence located on the secondary frontage must not exceed 60% of the depth of the lot (excluding the corner splay) taken from the rear boundary towards the primary frontage.

•

Wing return fencing, other than on a corner, is to be setback a minimum of 1.5m from the front of the dwelling.

– Have been approved by the DAP •

The driveway must be offset a minimum of 500mm from the nearest side boundary to allow for landscaping. This must include vegetation.

•

Driveway width must match back to the width of the constructed crossover at the title boundary and be completed prior to moving into your home.

•

Materials are to consist of: – Exposed aggregate concrete; or – Brick, slate or natural stone pavers; or – Plain and colour concrete.

•

Outside the home

Only one crossover and driveway will be permitted for each lot (unless shared) or otherwise considered by the DAP. Approval from Council will also need to be sought.

23

OTHER ESSENTIALS MUST-HAVES •

•

You must ensure that your home is connected to all available in ground services according to the service provider’s standards and the broad band optic fibre network if present.

After settlement, the owner is responsible for the maintenance of the allotment, even if no construction has begun. Council Infringement Notices may be issued if the lot is not neat and tidy.

•

You are required to maintain your nature strip.

•

Any additions, fixtures, equipment, sheds, outbuildings or pergolas must be located to the rear of your home out of sight from your street or any public reserve. This includes (but is not limited to) satellite dishes, external hot water services, solar hot water systems with roof mounted tanks, water tanks, spa pumps, heating and cooling units, rubbish disposal containers, rain water tanks, washing lines and solar pool heating coils.

Solar panels for heating water or generating energy are exceptions to this requirement.

•

Evaporative cooler units must be low profile ‘contour’ type and the same colour as your roof, placed at the rear.

Ensure the top of the unit is below the roof ridgeline.

•

Exposed plumbing (other than downpipes) is not acceptable.

•

Any shed, outbuilding or pergola greater than 10sqm in area, that is more than 3m in height, must complement the finish of your home and be approved by the DAP.

•

All toilets and a washing machine stop tap are to be connected to recycled water.

•

Lots 300 sqm and over must install a minimum 3,000 litre rainwater tank, prior to Occupancy Permit, which must be connected to supply water to toilets and a washing machine stop tap. Recycled water may not be discharged into the watertank.

CONSIDERATIONS •

Select water fixtures, fittings and appliances with the highest possible WELS rating for your needs and budget.

•

Consider choosing a solar hot water system.

•

LED lighting is the most efficient choice and should be selected wherever possible.

•

Pick the highest energy star rated appliances possible for your needs and budget.

•

Ensure you have sufficient space to store your general waste, recycling and green waste bins.

FOR MORE TIPS AND INFORMATION, VISIT: •

Sustainability Victoria – You and Your Home: www.sustainability.vic.gov.au/You-and-your-home

•

Australian Government – Your Home: www.yourhome.gov.au

•

Nationwide House Energy Rating Scheme (NatHERS) www.nathers.gov.au

24

LANDSCAPING

RECOMMENDED SPECIES LIST

AIMS

GROUNDCOVERS

Five Farms encourages a blend of indigenous vegetation and other landscape elements. Landscape design and plant selection should minimise the need for garden watering.

Indicative landscape plans must be submitted as part of the design approval process.

MUST-HAVES •

Include recycled water tap for lawn and garden watering.

•

The front landscaping must include a small tree or shrub that is a minimum height of 1m at installation and 2m in height at maturity. Selected from Recommended Species List.

•

Artificial turf must not be used in the front landscaping.

•

Front landscaping, as well as any garden areas within public view, must be completed within three months of the Certificate of Occupancy being issued.

•

All parts of the lot not built or paved that are visible from a front, side street or rear laneway must be well maintained.

•

Garden beds are to contain organic or pebble mulch.

•

No less than 20% of your front garden is to be garden beds.

•

No more than 60% of your front garden is to be hard paved. This includes the driveway.

CONSIDERATIONS Position trees with large canopies to provide shade in summer and reduce glare from the surrounding environment.

Ensure tree locations and species optimise summer breezes.

To reduce irrigation water use, we recommend installing a waterwise garden. Also consider planting species native to the local area.

SHRUBS Common Name Brachyscome White Bliss (Cultivar name) Botanical Name Brachyscome multifida (Hybrid) Height & Width at Maturity 0.3m x 0.3m

Common Name Aussie Flat Bush™ Botanical Name Rhagodia spinescens Height & Width at Maturity 1.0-2.0m x 2.0-3.0mm Pot Size 150mm

Pot Size 150mm

Common Name Blue Fescue Botanical Name Festuca glauca Height & Width at Maturity 0.3m x 0.3m Pot Size 150mm

Common Name Birthday Candles (Cultivar name) Botanical Name Banksia spinulosa (Hybrid) Height & Width at Maturity 0.4m x 0.5m Pot Size 150mm

Common Name Creeping Boobialla

Common Name Sageleaf Rockrose

Botanical Name Myoporum parvifolium

Botanical Name Cistus salviifolius

Height & Width at Maturity 0.2m x 0.2m

Height & Width at Maturity 0.2m x 5.0m

Pot Size 150mm

Pot Size 150mm

Food waste is one of the biggest contributors to landfill emissions. By installing a compost bin or worm farm, you can reduce your waste to landfill whilst also producing a fertiliser for your garden.

Common Name Blue Chalksticks Botanical Name Senecio serpens Height & Width at Maturity 0.3m x 0.6m Pot Size 150mm

25

RECOMMENDED SPECIES LIST SHRUBS

TREES Common Name White Correa

Common Name Grevillea ‘Scarlet Sprite’

Botanical Name Correa alba

Botanical Name Grevillea rosemarinifolia (Hybrid)

Height & Width at Maturity 1.5m x 2.0m Pot Size 150mm

Height & Width at Maturity 1.0m x 1.0m Pot Size 150mm

Common Name White Gaura

Common Name Sea Lavender

Botanical Name Gauea lindheimeri

Botanical Name Limonium perezii

Height & Width at Maturity 1.0m x 1.0m

Height & Width at Maturity 0.6m x 0.6m

Pot Size 150mm

Pot Size 150mm

TUSSOCKS Common Name Agonis ‘Burgandy’ (Cultivar name) Botanical Name Agonis reflexa (Hybrid) Height & Width at Maturity 5.0m x 3.0m

Common Name Revelation® Botanical Name Dianella revoluta Height & Width at Maturity 0.3m x 0.5m Pot Size 150mm

Pot Size 45L

Common Name Corymbia ‘Sentuous’ syn Dwarf Pink’ (Cultivar name) Botanical Name Corymbia citriodora (Hybrid) Height & Width at Maturity 7.0m x 3.0m

Common Name Tanika® Botanical Name Lomandra longifolia Height & Width at Maturity 0.6m x 0.6m Pot Size 150mm

Pot Size 45L

26

Common Name Hop Goodenia

Common Name Rosemary

Common Name Vintage Red™

Common Name Kingsdale™

Botanical Name Goodenia ovata

Botanical Name Rosmarinus officinalis

Botanical Name Poa poiformis

Height & Width at Maturity 1.0m x 1.0m

Height & Width at Maturity 0.8m x 0.6m

Botanical Name Eucalyptus cladocalyx (Hybrid)

Pot Size 150mm

Pot Size 150mm

Height & Width at Maturity 8.0m x 4.0m Pot Size 45L

Height & Width at Maturity 8.0m x 4.0m Pot Size 150mm

27

DESIGN GUIDELINES CHECKLIST Documentation required to be submitted for approval to the Design Assessment Panel.

Lot No: Street Address:

1

Owner's Name: Mobile No: Home Ph: Work Ph:

Site plan (1:200 scale) •

Setbacks from all boundaries

•

Building Envelope

•

External features including driveways, paths, fencing and outbuildings

•

Landscaping

2

House floor plans (1:100 scale)

3

Elevations from four sides (1:100 scale) •

Email: Owner's Address:

Front, rear and both sides

4

Roof plan (1:100 scale)

5

Schedule of external materials

Each box is to be ticked.

Applications cannot be assessed until all of the above information is available.

Builder's Name:

Please submit the above documentation via email: FPA.Approvals@frasersproperty.com.au

Contact Name:

A copy of this form must be included with the lodgement of plans for approval.

Contact No: Email: Signature of Owner/Builder: (Please circle)

Date:

/

/

V1 PlnA00571/19 (c11) endorsed 05/05/2021 V2 PlnA00571/19 (c11) endorsed 08/11/2021 V3 PInA00571/19 (c11) endorsed 06/05/2022 V4 PInA00571/19 (c11) endorsed 25/11/2022

28

29

13 38 38 | fivefarms.com.au

The information and images in this brochure are intended as a general introduction to Five Farms and do not form an offer, guarantee or contract.

Please note that whilst reasonable care is taken to ensure that the contents of this brochure are correct, this information is to be used as a guide only.

All plans and images are conceptual only and may change at any time without notice. The computer generated images of dwellings are indicative only.

The developer reserves the right to amend the finish and selections that constitute the external and internal fabric of the development due to unforeseen building constraints and product availability. Purchasers must rely on their own enquiries and the contract for sale.