Marketing
Product
Service
Spares
Email:
Email:
Email: service@foster-gamko.com
Email: parts@foster-gamko.com
To return to the contents at any point, click on the blue Foster logo, at the top right of every page
view any of the below products, simply click:
out for the Foster ‘Play’ buttons –these will launch bonus content
The next generation of professional refrigeration is here
With G3, you get the best of both worlds: high performance coupled with low energy consumption, from the Refrigeration Experts.
Huge market-leading capacity with four shelves as standard on single door cabinets, maximising usable space.
The redesigned condenser means little maintenance and incredible efficiencies across the entire range.
Foster Shield means you can rest assured, that from advanced temperature control to hygienic design, you’re protected from the dangers of unsafe food storage.
The controller display uses pure LEDs incorporating InGaN technology, meaning it achieves higher resolution, lasts longer, all while using less power.
304 is the gold standard in performance stainless steel with Foster’s unique polishing system meaning that the heaviest touchpoints in a kitchen are covered.
the ultimate in temperature
hygiene and efficiency, the EP700 is a product that you can rely on.
in ambient temperatures up to 43°C.
Ensure that your low energy fridge stays a low energy fridge.
The next generation of our award-winning condenser, revolutionising the efficiency of refrigeration.
Now fitted across the G3 range of cabinets and counters, Slimline cabinets and EcoShow multidecks as standard
Fitted across the G3 range as standard
Learn more at fosterrefrigerator.com/stayclear
The next generation of professional refrigeration is here
We offer a wide selection of EcoPro G3 counters to ensure you find the right option for you and your business. From drawer combination to saladette cut out counters, these high-performance professional refrigeration units are fitted with energy efficient, commercial grade components for maximum reliability and minimum cost.
250,000 counter variations available for your customisation.
The redesigned condenser means little maintenance and incredible efficiencies across the entire range.
A reduced footprint – the more compact design of G3 counters allow them to fit in the tightest of kitchen spaces without losing capacity.
Foster Shield means you can rest assured, that from advanced temperature control to hygienic design, you’re protected from the dangers of unsafe food storage.
The controller display uses pure LEDs incorporating InGaN technology, meaning it achieves higher resolution, lasts longer, all while using less power.
Note: Drawers wlil accommodate GN 1/1 pans up to a maximum depth
or
EcoPro G3 1/2 Counters
Featured options
Half drawers
Heavy duty card wrap packaging
304 stainless steel back and unit cover
100mm Splashback
Saladette cut out with cover
+£144
+£196
+£128
+£756
Less worktop, supplied with s/s cover (reduces height by 28mm) +FREE
Levelling bolts in lieu of castors +FREE
Additional nylon coated shelf (GN 1/1) +£40
Stainless steel trayslides (per pair) +£32
H f rames for bridging saladette (each) +£56
Helicoil mains lead +£104
Right hand mounted refrigeration unit
Third drawers
cut out
Saladette dimensions 510 x 305mm (w x d). Accepts 1x GN1/1 pan or 3 x GN 1/3 pans per saladette (maximum 100mm depth) (per section) (per section)
+FREE
Legs in lieu of castors -
100mm (height 835mm to 865mm) +FREE
150mm (height 885mm to 935mm) +£76
Alternative height castors -
100mm (height 885mm) +FREE
100mm and 15mm spacer (height 900mm) +£76
220/60/1 electrical supply +£396
Less condensing unit (castors not available, legs supplied as standard)
Refrigerator EMAIL
Freezer EMAIL
All images and / or photographs shown are for illustration purposes only
Note: Drawers will accommodate GN1/1 pans up to a maximum depth of 150mm (1/2 drawer models) or 100mm depth (1/3 drawer models)
NB. Please specify all options required at the time of ordering.
Heavy duty card wrap packaging is required when shippping in less than a full container load.
No. shelves: 2 per door
section (GN1/1)
Electrical supply: 230/50/1
Gross Volume: 435 Ltr
Exceeds ISO climate class 5
(mm)
Note: Drawers wlil accommodate GN 1/1 pans up to a maximum depth of 150mm (1/2 drawer models) or 100mm depth (1/3 drawer models)
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C Refrigerator +1/+4°C
Featured options
Half drawers
+£1,124
Third drawers
Saladette cut out High
+£1,540
+£408
Heavy duty card wrap packaging
304 stainless steel back and unit cover
100mm Splashback
Saladette cut out with cover
+£144
+£244
+£180
+£800
Less worktop, supplied with s/s cover (reduces height by 28mm) +FREE
Levelling bolts in lieu of castors +FREE
Additional nylon coated shelf (GN 1/1)
Stainless steel trayslides (per pair)
Helicoil mains lead
+£40
+£32
+£104
Right hand mounted refrigeration unit +FREE
Legs in lieu of castors -
100mm (height 835mm to 865mm) +FREE 150mm (height 885mm to 935mm) +£76
Alternative height castors -
100mm (height 885mm) +FREE
100mm and 15mm spacer (height 900mm) +£76
220/60/1 electrical supply
Less condensing unit (castors not available, legs supplied as standard)
Refrigerator
Freezer
All images and / or photographs shown are for illustration purposes only
+£396
Saladette dimensions 1040 x 305mm (w x d). Accepts 2 x GN1/1 pans or 6 x GN 1/3 pans per saladette (maximum 100mm depth) (per section) (per section)
Note: Drawers will accommodate GN1/1 pans up to a maximum depth of 150mm (1/2 drawer models) or 100mm depth (1/3 drawer models)
NB. Please specify all options required at the time of ordering.
Heavy duty card wrap packaging is required when shippping in less than a full container load.
No. Shelves: 8 (GN 1/1)
Electrical supply: 230/50/1
Gross Volume: 585Ltr
Exceeds ISO climate class 5
G3 counter range height details (EP1/2, EP1/3 and EP1/4)
standard 80mm castor 0mm 865mm 100mm castor +20mm 885mm Less worktop -32mm 833mm 35mm castor -40mm 825mm levelling bolt -92mm 773mm
Contact us with any queries regarding remote or reduced width models.
Allowing the storage and preparation of food at the heart of the kitchen, the EcoPro G3 counter offers unrivalled flexibility, reliability and quality. Operates in ambient
No. shelves: 2 per door
section (GN1/1)
Electrical supply: 230/50/1
Gross Volume: 585 Ltr
Exceeds ISO climate class 5
Note: Drawers wlil accommodate GN 1/1 pans up to a maximum depth of 150mm (1/2 drawer models) or 100mm depth (1/3 drawer models)
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Refrigerator +1/+4°C
Featured options
drawers
Third drawers
(per section) (per section)
cut out
Heavy duty card wrap packaging
+£144
304 stainless steel back and unit cover +£292
100mm Splashback +£180
Saladette cut out with cover +£940
Less worktop, supplied with s/s cover (reduces height by 28mm) +FREE
Levelling bolts in lieu of castors +FREE
Additional nylon coated shelf (GN 1/1) +£40
Stainless steel trayslides (per pair) +£32
Helicoil mains lead +£104
Right hand mounted refrigeration unit +FREE
Legs in lieu of castors -
100mm (height 835mm to 865mm) +FREE
150mm (height 885mm to 935mm) +£76
Alternative height castors -
100mm (height 885mm) +FREE
100mm and 15mm spacer (height 900mm) +£76
220/60/1 electrical supply +£396
Less condensing unit (castors not available, legs supplied as standard)
Refrigerator
All images and / or photographs shown are for illustration purposes only
Note: Drawers will accommodate GN1/1 pans up to a maximum depth of 150mm (1/2 drawer models) or 100mm depth (1/3 drawer models)
Saladette dimensions 1570 x 305mm (w x d). Accepts 3 x GN1/1 pans per saladette (maximum 100mm depth)
NB. Please specify all options required at the time of ordering. Heavy duty card wrap packaging is required when shippping in less than a full container load.
Foster’s advanced refrigeration system, featuring the multi-award winning +stayclear condensing unit, protects your equipment keeping it efficient and food safe.
Fitted across the G3 range of cabinets and counters, Slimline cabinets and EcoShow multidecks as standard
Reduces maintenance costs and customer site disruption
Fitted across the G3 range of cabinets and counters, Slimline cabinets and EcoShow Multidecks as standard
Helps to maintain more reliable temperature control improving food safety
Reduces maintenance costs and customer site disruption
Equipment lasts longer
Helps to maintain more reliable temperature control improving food safety
Ensures your low energy fridge stays a low energy fridge.
Equipment lasts longer
Increased carbon reduction through lower energy use
Learn more at fosterrefrigerator.com/stayclear
An innovative extension to our counter range, the Foster FlexDrawer offers innovative counter storage solutions for even the most demanding of professional kitchens.
Can change temperature from fridge to freezer at the touch of a button
Incredibly flexible – clever drawer design holds 3x GN 1/1 pans wide, meaning ALL space is usable
Designed to accommodate hot cooking equipment such as broilers, griddles and induction hobs
Massive strength – drawer runners can hold up to 200kg meaning unrivalled quality is assured
Space saving – 775mm width models available
And so easy to clean!
Fully removable robust ABS drawer bins
*Depth includes 20mm stopper required for air circulation (detachable if not wall-sited)
Exceeds climate class 5
Note: Max worktop weight loading: 150kg
*Depth includes 20mm stopper required for air circulation (detachable if not wall-sited)
Exceeds climate class 5
Note: Max worktop weight loading: 150kg
*Depth includes 20mm stopper required for air circulation (detachable if not wall-sited)
Note: Maximum weight loading: 280kg
*Depth includes 20mm stopper required for air circulation (detachable if not wall-sited)
Note: Maximum weight loading: 280kg
The Foster Slimline range of cabinets have been cleverly designed to fit in compact or awkwardly shaped kitchen environments, whilst still offering outstanding storage capacity, style and efficiency.
The +stayclear condenser means little maintenance and incredible efficiencies
Bottom mounted refrigeration system draws air from the cooler part of the kitchen ensuring efficient operation
So slim that even the double door model can go through most single pedestrian doorways
Even temperature distribution and fast recovery achieved by advanced air circulation, meaning an optimum temperature to keep your food fresher for longer
High quality forced air refrigeration system will operate up to 40ºC
Energy efficient R290 refrigerant, the greenest refrigerant available on the market
The XTRA range has been cleverly designed to provide a solution that meets your refrigeration requirements on a budget. Available at a competitive price, the range includes a suite of value for money cabinets and counters, offering reliable products you can depend on.
Affordable and reliable refrigeration by Foster
– Fast availability – get your XTRA when you need it
– Unrivalled aftercare - 98% of spare parts held in stock
A full range of value for money refrigeration you can depend on:
– 600/1300 litre Gastronorm Cabinets
– 4 00 litre Slimline Cabinets
– 2 and 3 door Gastronorm Counters
Newly upgraded specification giving you even more value!
– Energy efficient R290 hydrocarbon refrigerant available across the range, reducing your energy bills
– Newly designed cabinet airflow further improves p erformance, making sure cold air gets to your food
you
Heavy duty cooking equipment can rely on the support of the Foster Low Level Counters. Undercounter refrigeration is provided at the point of cooking, offering a base for a char-grill, griddle or broiling top. Ideal for quick service restaurants and pubs as it provides refrigerated storage underneath the cooking area itself.
- Designed to carry up to 300kg (evenly spread) – invaluable to any quick service cook-off station
- Choice of two or four stainless steel drawer models
- Robust build with heavy duty handles and fixings to withstand constant use
- All models fitted with drawer locks and lockable castors as standard
Modular Gastronorm Roll In (1 GN 1/1 trolley capacity)
Modular Gastronorm Roll In (2 GN 2/1 trolley capacity)
Perfect food prep whatever your operation, with fresh ingredients at your fingertips. So whether you’re making pizzas, sandwiches, salads or desserts, you can minimise your kitchen processes whilst maximising your speed of service and profitability.
Our Prep Station has been designed with the operator in mind, all pans and work bench height are within comfortable reach
The fan assisted, forced air system delivers even temperature holding to both the counter base and top pan storage section
Energy-saving natural hydrocarbon refrigerant is available on our most popular models at no extra cost
Clever inner catch tray stops food from falling into the main storage area, quickening clean down times
A raft of options available to suit your preparation requirements, including drawer sections and 150mm deep gastronorm pan arrangements.
No. Shelves: 6
Top accepts: 7 x GN1/3 Pans
(Max 150mm depth)
Main compartment: GN 1/1 storage
Electrical supply: 230/50/1
Gross volume: 440 Ltr
NB. Please specify all options required at the time of ordering.
Heavy duty card wrap packaging is required when shippping in less than a full container load.
NB. Gastronorm pans are available on request. Please contact the Export Department for pricing / information.
The essential element to the commerical kitchen
Experts in blast chilling and freezing since 1973, Foster’s latest Touchpad range maximises the condition, taste and texture of your food.
The industry choice, since 1973 for meeting hygiene standards, preserving the quality of your food and reducing food waste
Our new upgraded standard blast chiller models have the addition of an occasional freeze capacity for ultimate flexibility
Just press and go! Forget the confusion of other blast chillers with Foster’s intuitive user friendly control panel
– Clear colour coding to indicate cycle status
– Automatically selected timed or probe chill/freeze options
Exceed your quality expectations
– Blast chill from +70°C to +3°C in 90mins with an entry temperature of up to 90°C
– Blast freeze from +70°C to -18°C in less than 240mins
304 stainless steel interior & exterior: the ‘gold standard’ in performance finishes meaning quality is assured
Range of large capacity modular blast chillers and freezers available designed to cope with even the most demanding, high volume kitchens
Cabinet Blast Chiller/Freezer (15kg chilling capacity)
Cabinet Blast Chiller/Freezer (22kg chilling capacity)
Cabinet Blast Chiller/Freezer (38kg chilling capacity)
The BCT Range – Blast Chillers with occasional freeze capacity
Foster’s upgraded range includes an occasional freeze capacity, denoted by the suffix of the product code:
BCT38-18
BCT = Blast Chiller Touchpad
38 = 38kg blast chilling capacity
18 = 18kg occasional blast freezing capacity
The range is said to have ‘occasional freeze’ capacity as there is no integrated defrost system, meaning users needing to blast freeze on a regular basis should choose the dedicated BFT range.
The BFT Range – Dedicated Blast Freezers
Foster offers a dedicated blast freezer range, with a freezing capacity of +70ºC to -18ºC in less than 240 minutes within specifications.
BFT38
BFT = Blast Freezer Touchpad
38 = dedicated 38kg blast freezing capacity
It should be noted that the BFT range can also operate as a blast chiller if required.
**Depth includes 55mm spacer to rear. Also allow 55mm for handle protrusion.
*Supplied without shelves
NB. Please specify all options required at the time of ordering.
Foster can offer the complete package on request. The following is a guide of considerations for typical applications. Please note that as each installation is unique, it is the responsibility of the installing engineer to select the components relevant to prevailing site conditions and the customer’s intended method of operation.
The conditions experienced by the condensing unit will vary considerably throughout the cycle. The capacity has been defined in given conditions but please ensure that:
When selecting the condensing unit for Blast Chilling, the evaporating temperature range should be a minimum of +10°C to -25°C to cope with the pull down load.
When selecting the condensing unit for Blast Freezing, the evaporating temperature range should be a minimum of +10°C to -40°C on MBCF occasional freeze models. The MBCF models use MOP expansion valves rated at -15°C.
Where the dealer supplies the Condensing Unit, all of the following items need to be supplied: Condensing Unit, Oil Separator, Oil Separator Heater, HP/LP switch, Sight Glass, Drier Suction Line Vibration Eliminator, Crankcase Heater, Liquid Line Solenoid Valve (must be fitted at liquid inlet to Blast Chiller Coldroom, not at the Condensing Unit), Power Box (this should contain a minimum of lockable isolator, circuit breakers, contactors and current overloads to suit the Condensing Unit).
The start method for the compressor will depend on equipment size and site conditions. ie. DOL, Star Delta, PWS.
On MBCF models only, an interlock preventing both defrost and pump down simultaneously may be required depending on rating of electrical supply. Suction Line insulation, refrigerant and electrical cabling also to be supplied by the dealer.
The installer should consider aspects such as capacity control, condenser head pressure control and unloaded start (as deemed necessary by site conditions and anticipated usage).
For additional protection, the following should be considered: Phase failure, Suction Line Accumulator (particularly with short pipe runs where there is potential for liquid return).
To facilitate fault diagnosis we suggest that a shut off valve and sight glass be installed just after the liquid line solenoid valve and a pressure line connection in the suction line exit from the Blast Chiller/Freezer.
Where a double module unit is installed, it is usual to supply a common liquid and suction line from the condensing unit to the Blast Chiller/Freezer and branch off on top of the coldroom. Fit shutoff valves and sight glass in each branch after the tee.
MBCT models are supplied floorless for blast chilling application only.
MBCFT models are supplied complete with 25mm floor and are suitable for occasional blast freezing and non-ground floor sites.
Chilling capacity +70ºC to +3ºC in less than 90 minutes within specifications. Entry temperature of up to 90ºC for chilling. Freezing capacity from +70ºC to -18ºC in less than 240 minutes within specifications.
All models supplied less condensing unit for remote applications. Separate electrical supply required for condensing unit (3 phase + neutral). For full details on condensing units and modular products visit www.fosterrefrigerator.com
MBCT75 / 100 / 150
Electrical supply: 230V/50Hz/1Ø
Connected Load: 1.1kW
MBCFT75 / 100 / 150
Electrical supply: 230V/50Hz/1Ø
Connected Load: 5.1kW
MBCT250
Electrical supply: 400V/50Hz/3Ø
Connected Load: 1.1kW/Ø
MBCFT250
Electrical supply: 400V/50Hz/3Ø
Connected Load: 2.6kW/Ø
RBCT 20-60
Specific model to accept the Rational 201 trolley with a chilling capacity of 60kg
Modular Blast Chillers
Modular models designed to take most standard trolleys, chilling capacities from 75kg to 250kg, with occasional freezing on MBCFs
Electrical
RBC 20-60: 400/50/3-16A
RBC 20-60 (remote): 230/50/1
(separate
without control panel 1200mm
without control panel 1200mm
models are designed to take most standard trolleys, chilling capacities from 75kg to 250kg, with occasional freezing on MBCFs.
models
Supplied complete with 25mm floor and are suitable for occasional blast freezing and non-ground floor sites.
models
Supplied complete with 25mm floor and are suitable for occasional blast freezing and non-ground floor sites.
Foster’s advanced refrigeration system, featuring the multi-award winning +stayclear condensing unit, protects your equipment keeping it efficient and food safe.
Fitted across the G3 range of cabinets and counters, Slimline cabinets and EcoShow multidecks as standard
Reduces maintenance costs and customer site disruption
Fitted across the G3 range of cabinets and counters, Slimline cabinets and EcoShow Multidecks as standard
Helps to maintain more reliable temperature control improving food safety
Reduces maintenance costs and customer site disruption
Equipment lasts longer
Helps to maintain more reliable temperature control improving food safety
Ensures your low energy fridge stays a low energy fridge.
Equipment lasts longer
Increased carbon reduction through lower energy use
Learn more at fosterrefrigerator.com/stayclear
gap required to rear of cabinet for air circulation.
have never looked so good
Efficiency meets stunning display, with the award-winning EcoShow. With an 80% energy saving on previous models and our new revolutionary uplighting, your products have never looked so good.
The EcoShow range can store between 306 and 884 cans and that’s without double stacking!
Maximum visibility through the side panels for enhanced visibility of content
Our extraordinary uplighting uses LED lighting (patent pending) with new anti-glare feature
Frameless glass doors save 80% on energy compared to doorless models
All models fitted as standard with our award-winning +stayclear low maintenance condenser
The Innovative +stayclear condenser means little maintenance and incredible efficiencies across the entire range.
Showcasing your products beautifully
From convenience stores and cafes to bakeries and supermarkets; Foster Multideck Display Chillers are available in two ranges that offer the perfect solution to suit all applications.
Huge capacity
– Slim Multidecks stock 3 sandwich packs deep on a slimline footprint
- Pro Multidecks hold 7 coke bottles deep and over 5 display levels
Designed using cutting-edge ‘CFD’ modelling technology for genuine temperature retention ensuring food stays fresher for longer
Brilliantly bright LED lighting lasts 10x longer than fluorescents and saves you money
Enlarged thick toughened glass for maximum display and enhanced safety
Shelves: 4 (inc base)
1-3 dimensions: 1093 x 400mm (wxd) Base dimensions: 1093 x 415 mm (wxd)
drink can capacity (single stack): 384
230/50/1 No. Shelves: 4 (inc base)
Shelves 1-3 dimensions: 1393 x 400mm (wxd)
Base dimensions: 1393 x 415 mm (wxd)
drink can capacity (single stack): 504
(mm)
A
our immersive showroom today at fosterrefrigerator.com/showroom gamko.com/showroom
Foster’s innovative coldstore range includes standard size packaged coldrooms and custom coldrooms designed to maximise your budget and storage capacity on site with a wide choice of refrigeration equipment. Our diverse range has been developed to meet all the demands your business has.
UK manufacturer, ensuring we carefully manage and maintain product quality and continuously reduce our carbon footprint
Expertly trained and experienced team provide expertise and advice to guide you through the process.
Full mechanical and electrical schedule is available for every job we produce, allowing customers total clarity and avoiding any issues on site
Bespoke coldrooms are designed to maximise your available site space allowing you the flexibility and a choice of door positioning, coldroom height and dimensions. Bespoke coldrooms offer you all the benefits of designing and building your own tailor made coldroom.
Infinitely adapatable, utterly foodsafe.
To ensure your enquiry is dealt with efficiently, our team of experts can advise you on all aspects of your coldstore enquiry and then provide you with a fast, accurate coldstore quotation.
Our design team will then work with you to ensure that we provide you with a site optimised, cost effective coldstore solution to suit your specific application.
All Foster bespoke coldstores are manufactured to the highest quality standards whilst complying to the very latest foodservice legislation.
Made-to-measure coldstores
– Allows the customer to choose the ideal room size and layout
– Available in either stainless steel or white laminate finishes
– Weatherproof roofs for external coldstores
– Large coldstores with forklift access
– Mortuary chillers
- Fast, accurate computer generated coldstores quotations
Bespoke Coldstore build features include:
Door Options
Low voltage door frame heaters (recommended with all rooms of temperatures below -2˚C or high humidity)
Low voltage transformer
Door kick plates for further protection to doors
Wiper gasket for recessed/ ramp options
Door viewing panel lets you see into the coldroom without opening the door (above 0˚C only)
Shelving
Two hygienic and easy to clean complementary systems with either wire, slatted, solid or perforated shelves
Semi-rebate Door
Available in a range of sizes to suit customer requirements.
Door dimensions:
1975 x 900mm (standard)
1975 x 800mm (option)
1975 x 680mm (option)
Remote Refrigeration
Fully packaged refrigeration system
Includes Foster low energy coolers
Seven temperature options
Split system flexibility
Easy remote operation
High/low temperature alarm
Sliding Doors
Ideal for sites with narrow corridors and/or trolley traffic.
Widths available from 600mm to 3000mm in 100mm increments
Integral Refrigeration
Wall or ceiling mounted
integral refrigeration system
Choice of five different design temperature options available
Choice of capacities
Programmable control panel
Tough, hygienic construction
Personnel Doors
For easy access from one room to another.
Sizes on application
Other Options
Bumper Bars
Give added protection from trolley traffic
Ceiling Support
Coldroom ceiling supports engineered to suit individual building and coldroom designs
Pressure Relief
Valves
Recommended on all coldrooms below 0˚C
Double Glazed
Windows For easy stock checking without the need to open a coldroom door
Infill Panels
Finish gaps from coldroom to wall or ceiling & create a clean, safe finish
- All remote systems must be installed and commissioned by competent persons. They must be installed in accordance with the prevailing version of EN378 “Refrigerating systems and heat pumps. Safety and environmental requirementsBasic requirements, definitions, classification and selection criteria” and BS 7671 – “Requirements for Electrical Installations” and the appropriate commissioning documents completed accordingly.
NOTE: Condensing units must not be installed on top of remote cabinets – some additional stressing has to be built into a cabinet to withstand the weight of a top-mounted unit.
Once a product has been purchased any spares required can be purchased from the Foster and Gamko Spares Department. Call +44 (0)1553 780300 or email parts@foster-gamko.com.
All prices are ex Foster warehouse, King’s Lynn. Sea and air freight charges are available on application from the Export Department.
We recommend that all consignments are insured, warehouse to warehouse. Insurance cover can be arranged by the Export Department.
Customers should check all consignments carefully upon arrival and immediately notify local insurance agents of any damage or losses in transit. Where applicable, insurance details are stated on the original invoice.
All non-negotiable documents are forwarded either direct to customer or nominated clearing agents, by arrangement, to facilitate clearance formalities. Negotiable documents are normally forwarded by customer’s bankers, but may be forwarded direct to customer, by special arrangement, where bank channels involve delay in deliveries.
The Foster Export Team is available to assist with the provision of documentation required to comply with local national import standards; we reserve the right to pass on any costs incurred in obtaining the appropraite certification.
Standard electrical supply is 230/50/1 unless otherwise stated in our literature. For special voltages, please check availability with the Export Department.
N.B. Delivery periods for special voltage models are liable to be extended.
Standard Specification
Standard specification on all products - polythene wrapped on pallets.
Heavy Duty Card Wrap (with full height tri-wall cardboard sleeve and polythene wrap):-
Please refer to options table for relevant model for pricing details.
All images and / or photographs shown are for illustration purpose only. All images and photographs are not intended to be relied upon for, nor to form part of, any contract unless specifically incorporated in writing into the contract. Solely the dimensions and specifications incorporated in the quotation or purchase order confirmation shall be contractually binding.
Notes
We reserve the right to change specifications without notice. By using the prices within this publication you are accepting Foster Refrigerator's standard terms and conditions, a copy of which can be viewed at www.fosterrefrigerator.com/terms
On parts only, the earlier of 12 months from the date of installation, or 15 months from the date of shipment. NB. Full details of our warranty terms and conditions are available on request.
We reserve the right to apply an appropriate cancellation fee. No goods will be accepted back at Foster headquarters without prior agreement or authorisation.
- SITE ACCESS
We recommend that site access and position is checked for all products prior to delivery and installation. This is particularly important on 2 section cabinets and 2, 3 and 4 door counter models.
- INSTALLATION
Modular products are supplied with a panel plan and installation guidelines. Installation should be carried out by a competent person. NB. Modular products must be installed on a clear, flat, level, smooth and hard base.
- RECESSED FLOORS
Where floors, perimeter walls, or screeds are to be recessed for flush entry, a relevant recess depth from finished floor level should be provided. Please specify/indicate ‘recessed floor’ and ‘wiper gasket door’ requirements on order instructions.
- SITE ACCESS
We recommend that site access is checked to ensure that products, particularly modular panels, can be manoeuvred to the point of installation.
- HEAVY DUTY APPLICATION
We recommend the use of appropriate wall protection and/or floor reinforcing/insitu floors for any uses other than pedestrian/light trolley. Please contact the sales office for details.
