2 minute read

General Notes

Remote Reach In models

- Prices for standard integral units include the supply of condensing unit(s), valves and controls. These units are self contained and are ready for installation on delivery.

- Prices for “less condensing unit or remote models” include the fitting of expansion valves, thermostats and time-clocks as well as the provision of sealed liquid and suction line pipes terminated in the ‘unit compartment’.

Prices do not include condensing unit.

NOTE: Condensing units must not be installed on top of remote cabinets – some additional stressing has to be built into a cabinet to withstand the weight of a top-mounted unit.

IMPORTANT! Appliances must be positioned in well ventilated areas permitting constant free flow of air to the condensing unit, not exceeding specified ambient temperature. Condensers must be cleaned as and when required to allow suficient air flow. The frequency will be dependent on site conditions.

Spares

Once a product has been purchased any spares required can be purchased from the Foster and Gamko Spares Department. Call +44 (0)1553 780300

Packing / Crating

Standard specifications on all products - shrinkwrap.

Images relating to specification

All images and / or photographs shown are for illustration purpose only. All images and photographs are not intended to be relied upon for, nor to form part of, any contract unless specifically incorporated in writing into the contract. Solely the dimensions and specifications incorporated in the quotation or purchase order confirmation shall be contractually binding.

We reserve the right to change specifications without notice. By using the prices within this publication you are accepting Foster Refrigerator's standard terms and conditions, a copy of which can be viewed at www.fosterrefrigerator.com/terms

Cabinets and Integral Products

- SITE ACCESS

We recommend that site access and position is checked for all products prior to delivery and installation. This is particularly important on 2 section cabinets and 2, 3, and 4 door counter models.

- DELIVERY

For delivery services and charges please see page 94. - ZERO% Interest Free Credit is not available on

Modular Coldstores.

Foster Warranty Policy

- Please note that Foster Refrigerator’s standard warranty periods apply, a copy of which can be viewed at: www.fosterrefrigerator.com/warrantypolicy

- EXTENDED WARRANTY

If you wish to upgrade or extend your warranty package,

Foster offer a range of options from enhanced service packages to full labour cover.

Please call: +44 (0)1553 691122 or email service@foster-gamko.com

Trolley Loading and Modular Products

- INSTALLATION

Modular products are supplied with a panel plan and installation guidelines. NB. Modular products must be installed on a clear, flat, level, smooth and hard base.

- RECESSED FLOORS

Where floors, perimeter walls, or screeds are to be recessed for flush entry, a relevant recess depth from finished floor level should be provided. Please specify/indicate ‘recessed floor’ and ‘wiper gasket door’ requirements on order instructions.

- SITE ACCESS

We recommend that site access is checked to ensure that products, particularly modular panels, can be manoeuvred to the point of installation.

- HEAVY DUTY APPLICATION

We recommend the use of appropriate wall protection and/or floor reinforcing/insitu floors for any uses other than pedestrian/light trolley. Please contact the sales office for details.

- DELIVERY & ERECTION

See relevant charges for Modular Blast Chillers and

Chiller/Freezers. For other products please contact +44 (0)1553 691122.