Titan Case Summer 2011 Parts Plus

3%2)%3 !8)!, &,/7

#/-").%3

PARTS PLUS

Summer 2011 Edition 1

PARTS PLUS

Titan Deal

DEalS you can'T miSS!

Pistol Grip Grease Gun

10 Pack CIH Lithium Grease

$25.94 Part No. MC5403

$34.80

Part No. 132096A1

BETTER ToGETHER Buy A cAse of GreAse And GreAse Gun

for only

TiTan DEal - PRESEnT THiS couPon

Pistol Grip Grease Gun and 10 Pack of CIH Lithium Grease

CRA1EF11

chain & cable lubricant Part No. B505500 ...................................

$44.99

*Limit 3 per customer. Offer Valid through July 31, 2011. Limited quantities available.

Subject to availability. Must present coupon for special offers. Taxes not included.

TiTan DEal - PRESEnT THiS couPon

Chain & Cable Lubricant Buy 11 and get

CRA2EF11

$6.04/can

1 FREE

ans

c y 11

Bu

T GE EE R 1F

*Offer Valid through July 31, 2011. Limited quantities available.

Subject to availability. Must present coupon for special offers. Taxes not included.

Subject to availability. Prices subject to change without notice.

2

www.titanmachinery.com | Summer 2011

Major diesel engine manufacturers estimate that more than 50% of engine failures are cooling system related. Worn rings, scuffed pistons, cracked heads and corroded bearings may appear to have nothing in common with the cooling system, when in fact, these problems are often the symptoms of improper cooling system maintenance. Using XHD, a heavy-duty coolant formulated for use with off-road equipment, will help you avoid premature engine failure.

As diesel engines operate, vibration of the cylinders creates microscopic bubbles in the coolant that attach to the cylinder liners. These bubbles can implode with a force of over 15,000 PSI. This collapse can blast small holes in the cylinder liner. Without the protection of a heavy-duty coolant, the result is liner cavitation.

Over time, liner cavitation can allow coolant to enter the engine oil.

This compromises the lubrication of the engine oil and results in excess friction, which ultimately leads to engine failure. Many competitive coolants don’t provide adequate protection against this. XHD offers superior liner cavitation protection by covering internal parts with an oxide ďŹ lm that takes the abuse of implosions to avoid premature engine failure.

Imploding bubbles damage liners...

Time to check your coolant...

XHD HEavy-DuTy coolanT/anTiFREEzE

d AN Mix trAte e Pr CeN le! b N Co vAilA A

...which can cause cavitation Part No.

Product

Size

Price

B30204

XHD Premix

1 Gal/3.785 L

$14.50

B30205

XHD Premix

2.5 Gal/9.46 L

$33.89

B30206

XHD Premix

55 Gal/208.19 L

$712.91

B30207

XHD Premix

330 Gal/1249.2 L

$3,585.98

B30201

XHD Concentrate

1 Qt/.95 L

$1,175.26

B30202

XHD Concentrate

55 Gal/208.19 L

$1,175.26

B30203

XHD Concentrate

330 Gal/1249.2 L

$6,536.84

Subject to availability. Prices subject to change without notice.

www.titanmachinery.com | Summer 2011

3

Hay Equipment

RounD BalER - mainTEnancE KiTS Application: rbx443-rbx563, rb444-rb564 • Designed for larger repair jobs • Includes major components

Bearing Kit: Drive Roller Part No. 87298537 .........................................................

$248.40

• OE Components

Starter Roll Drive Kit Part No. 87298512 .........................................................

$258.89

Bearing Kit: 2-Pack Roller Tailgate Nose

Top Roller chain Drive Kit

Part No. 87298538 .........................................................

Part No. 87298513 .........................................................

$138.78

Bearing Kit: 2-Pack Top Tailgate Roller Part No. 87298539 .........................................................

Pickup Guard Kit 10 pack Part No. 87298536 .........................................................

$134.46

apron & clutch Drive Sprocket Kit

idler Sprocket Kit

Part No. 87298524 ...........

Part No. 87298552 ...........

$82.00

carrier Bearing Kit $128.45

$596.21

2M reel with curved fingers - 6 pack Part No. 87298530 .......

$101.30

$53.63

Pickup Finger Kit 10-pack

Part No. 87298970 ...........

$64.37

Subject to availability. Prices subject to change without notice.

4

www.titanmachinery.com | Summer 2011

CASE IH DISC MOWER CONDITIONERS AND WINDROWERS WITH DISC HEADS

KNiFe SeLectioN 7° Twist

Hay Equipment

DiSc mowER / mowER conDiTionERS

14° Std.

rotary disc Mower Blade Selection 7° twist KNives

14° Serrated

The 7° twist knives are recommended for abrasive soil and rocky crop cutting conditions. These knives function well in a wide range of field and cutting conditions.

14° twist KNives (stANdArd equiPMeNt) ANd 14° twist serrAted KNives The 14° twist knives are recommended for most crop conditions. The greater twist angle enables the knife’s cutting edge to cut closer to the ground and provide more lifting action to move the crop over the cutter bar into the conditioner, producing a cleaner cut. The greater twist angle in these knives makes them more susceptible to rock damage.

"v" KNives

The “V” knives are recommended for operation in rocky conditions where excessive knife bending is a concern. This style knife has greater resistance to bending when coming in contact with a foreign object. The cutting quality of this knife is not as good compared to the twisted knives.

deScriPtioN/tyPe Pitch/rotatioN

9847683

Knife - 7° Twist CW

$1.80

9847684

Knife - 7° Twist CCW

$1.85

86621872

Knife - 14° Twist CW

$1.73

86621873

Knife - 14° Twist CCW

$1.73

87029587

Knife - 14° Twist OS CW

$2.54

87029588

Knife - 14° Twist OS CCW

$2.54

86532078

Knife - "V" Rock Blade

$3.27

Disc mower Knife with Hardware Kits

Price

"v" Knives

Part No.

Disc mower Knife

with Hardware in Handy Service Packs APPLICATION: DISC MOWERS: DCX91, DCX101, DCX131, DCX132, DCX161 WITH LIFTERS WINDROWER HEADS: RDX161, RDX162, RDX181, with lifters

Disc Mower Knife 14° Twist Part No. 87298468

$12.78

Disc Mower Knife 14° Twist Serrated Part No. 87298467

$17.52

Disc Mower Knife "V" Rock Knife Part No. 87298472

$16.79

Part No.

deScriPtioN/tyPe Pitch/rotatioN

Price

87298470

7° Twist CW

$16.79

87298471

7° Twist CCW

$16.79

87298468

14° Twist CW

$12.84

87298469

14° Twist CCW

$12.84

87298466

14° Twist OS CW

$17.61

87298467

14° Twist OS CCW

$17.61

87298472

"V" Rock Blade

$16.87

Subject to availability. Prices subject to change without notice.

www.titanmachinery.com | Summer 2011

5

combines

TiTan comBinE clinicS Make sure you are up and running this season!

Join us at your local Titan Machinery Store for great deals and tips for the season.

Clinic location

ess c c n Acount s a t i y T Ac Da

E

Ese 0 a 15 T. FpR h urc m u 0 in Minim of $75

Clinic date

time

Huron ..............................................June 13......... 04:00 PM Lisbon .............................................June 14......... 04:00 PM RedďŹ eld ..........................................June 14..........10:00 AM Lidgerwood .....................................June 15..........10:00 AM Wahpeton .......................................June 15......... 06:00 PM Milbank ...........................................June 16............9:00 AM Jamestown .....................................June 27............9:00 AM Fergus Falls ....................................June 27......... 04:00 PM Graceville........................................June 28............9:00 AM Kulm ...............................................June 28......... 04:00 PM Moorhead .......................................June 28......... 04:00 PM Ada .................................................June 29......... 04:00 PM Grand Forks....................................June 29............9:00 AM Wishek ............................................June 29......... 06:30 PM Elbow Lake .....................................June 30......... 05:30 PM Mayville...........................................June 30............9:00 AM Arthur/ Casselton ............................. July 8 ...........10:00 AM Mandan........................................... July 12 ............9:00 AM Redwood Falls ................................ July 13 ..........10:00 AM GreenďŹ eld ....................................... July 18 ......... 04:00 PM Avoca.............................................. July 19 ......... 04:00 PM Kingsley .......................................... July 20 ..........10:00 AM Pipestone........................................ July 20 ......... 04:00 PM Crookston ....................................... July 21 ......... 03:00 PM Watertown ...................................... July 25 ..........10:00 AM LaMoure ......................................... July 25 ......... 04:00 PM Kearney .......................................... July 26 ............9:00 AM Pella................................................ July 26 ..........10:00 AM Grundy Center .............................. August 16 ....... 04:00 PM Iowa Falls ..................................... August 16 ..........9:00 AM Waverly ......................................... August 17 ..........9:00 AM Center Point.................................. August 15 ....... 04:00 PM Blairstown ..................................... August 18 ..........9:00 AM Oskaloosa..................................... August 18 ....... 04:00 PM Lexington/North Platte .................. August 29 ....... 06:30 PM Holdrege ....................................... August 30 ....... 06:30 PM

*150 Days No Interest valid for day of Combine Clinic only. See store for details. For commercial use only. Customer participation subject to credit qualificationand approval by CNH Capital America LLC. See your Titan Machinery Representative for details and eligibility requirements. Down payment may be required. Not all customers or applicants may qualify for this rate or term. CNH Capital America LLC standard terms and conditions will apply.

6

www.titanmachinery.com | Summer 2011

combines

GRain PlaTFoRm KiTS HiGH aRcH HolD-Down cliP SERvicE KiTS FoR 1020 HEaDERS wiTH 1-1/2'' KniFE SySTEm - Case IH 1-1/2'' Knife Systems currently have 100% hold-down clips down the length of the cutter bar. The High Arch Clip Kit now provides for a secure method of holding down the knife over the drive end. Longer service life and improved cutting are the benefits.

FoR 1010 & 1020 HEaDERS wiTH 3'' KniFE SySTEm - The High Arch Clip Kit now provides a secure method of holding down the knife over the drive end. Longer service life and improved cutting are the benefits. Kit includes high arch clip (1), mounting hardware and shims.

Part No. B92983

Part No. B95383 - 1020 Header .........

Part No. B95382 - 1010 Header .........

Kit includes: high arch knife clips (2) mounting hardware shims

$44.83 $39.03

case iH Sta-Sharp™ and Super Sta-Sharp™ Sections have a special design root serration to prevent excessive wear across the top. Complete selection of Sta-Sharp and Super Sta-Sharp sections available.

• Induction hardened for extra-long wear • Top-serrated sections have self sharpening feature • Available for 3'' and 1-1/2'' knife systems • High-carbon 1080 steel split Knife Kit 371618A1 with super sta-sharp sections

comBinE KniFE SElEcTion - STa-SHaRP™ SEcTionS header Size

3'' oNe Piece

Price

3'' SPLit

Price

1-1/2'' oNe Piece

Price

15'

451824A2

$224.68

451830A2

$322.34

1970502C5

$378.35

16.5'

NA

NA

NA

NA

1970503C5

$410.84

17.5'

451825A2

$247.75

4518301A2

$349.07

1970504C5

$364.48

20'

451826A2

$365.09

451832A2

$412.01

1970400C5

$366.49

22.5'

451827A2

$318.25

451833A2

$439.52

1970442C5

$558.93

25'

451828A3

$475.03

451834A3

$601.20

1970402C5

$626.60

30'

451829A3

$542.70

451835A3

$662.31

1970404C5

$709.53

comBinE KniFE SElEcTion - SuPER STa-SHaRP™ SEcTionS header Size

3'' oNe Piece

Price

3'' SPLit

Price

1-1/2'' oNe Piece auSteMPered SectioN

Price

15'

87439540E

$285.59

371613A2

$342.29

398746A1

$499.63

16.5'

87439541E

$301.31

371617A2

$358.62

398747A1

$430.58

17.5'

87439542E

$338.79

371618A2

$397.22

398748A1

$520.87

20'

87439543E

$349.60

371619A2

$464.15

398749A1

$607.31

22.5'

87439544E

$383.48

371620A2

$511.70

398750A1

$607.91

25'

376534A3E

$361.80

371621A3

$518.26

398751A1

$722.22

30'

376535A3E

$358.54

371622A2

$533.10

398752A2

$910.46

woBBlE BoX

woBBlE BoX REPaiR KiT

FOR 800 AND 1000 SERIES

For minimum downtime and new performance – choose the complete replacement.

Part No. 1330048C91 for 810/820 headers (does not include pulley)

$1,547.02

For boxes: Part No. 1330048C91 and Part No. 1316987C91 Part No. 1316987C91 for 1010/1020 headers (includes pulley)(Prior to 1995 models)

$1,463.83

Part No. 398290A2e for 1010/1020 headers (oil bath) (1995 and after)

$1,546.90

includes bearings, shims and hardware Part No. b95203

$176.31

Subject to availability. Prices subject to change without notice.

www.titanmachinery.com | Summer 2011

7

combines 8

www.titanmachinery.com | Summer 2011

combines

comBinE KiTS - 8010 aFX comBinE Rotating Straw chopper Knife Kit • For 4 mounts with fine cut configuration • For 8 mounts with coarse cut configurations • Includes 9 knives and hardware

$130.33

Part No. 87297764 ...............................................................

Fixed chopper Knife assembly • Includes bar and 21 knives (coarse) and 42 knives (fine) • Easy to assemble

$615.41

Part No. 87109353E - Coarse cut (Shown) ..........................

$682.63

Part No. 87298180 - Fine cut ...............................................

Fixed Straw chopper Knife Kit • Complete Set

$72.51

Part No. 87297767 - Coarse cut ...............................................

$140.85

Part No. 87297768 - Fine cut (shown)..................................

Rotor impeller Kit

Heavy Duty #557 chain with chrome Pin

• 1/2'' thick, AR235 Steel • Constant pitch impeller design • Hardened in critical areas for longer service life Part No. 87715003 ...................

• Heavy duty rolled formed slats for maximum strength • Replaceable bolt-on slats

$826.60

• Choice of smooth on serrated slats • Grade 8 hardware

Part No.

deScriPtioN

aPPLicatioN

Price

87283358

Chain with serrated slats

Non-rock trap models

$925.76 $1,295.78

87283359

Chain with serrated slats

Non-rock trap models

87283356

Chain with serrated slats

Rock trap models

$778.88

87283357

Chain with serrated slats

Rock trap models

$1,100.48

86995344

Connector link

86995345

Offset link

Part No. 87283358 ...................

$925.76

$10.06 $9.77

Rotor module options ModuLe deScriPtioN

PoSitioN

Part No. Lh

Rotor Module, Round Bar

Front

87282761

Price $472.72

Part No. rh 87282764

Price $472.72

Rotor Module, Large Wire 1/4'' Dia.

Front

86976416

$404.23

86976414

$372.98

Rotor Module, Large Wire 1/4'' Dia. Heat Treated

Front

86999090

$354.35

86999097

$354.35

Rotor Module, Slotted

Front

87000772

$521.86

87000774

$521.86

Rotor Module, Small Wire 3/16'' Dia. Heat Treated

Front

86976420

$434.75

86976418

$434.75

Rotor Module, Large Skip Wire

Rear

87109198

$307.46

87109201

$307.46

Rotor Module, Solid

Rear

87106654

$767.31

87106653

$767.31

Subject to availability. Prices subject to change without notice.

www.titanmachinery.com | Summer 2011

9

combines

2 3 0 0 S E R I E S KiTS AXIAL-FLOW comBinE PRoDucT SuPPoRT

®

COMBINES

Power-clean Evacuation System

Two new kits are now available to substantially reduce the cleaning requirements of the rotary air screen (RAS), radiators, coolers and engine air cleaners.

Rotary air Screen metal conversion and vacuum Kit • Minimizes the chances of the RAS plugging from crop debris (corn leaf, corn sucrose mist and fine/sticky dust) • Reduces the cleaning requirements of the RAS, radiator, coolers and engine air cleaner • Kit includes metal RAS, hydraulic driven vacuum components hoses, mounting brackets, outlet ducts for debris, mounting hardware and instruction manual rAs Metal conversion and Vacuum Kit for 2377 and 2388 combines Part No. 87362263 .................................................................................

$2,560.38

Spring loaded Rotary air Brush Kit • Cleans the interior of the RAS to dislodge any debris stuck to the rotary air screen • Reduces the cleaning requirements of the RAS, radiator, coolers and engine air cleaner • Kit includes metal rotary air brush assembly, stationary brush, mounting hardware, and instruction manual rotary Brush Kit for 2377 and 2388 combines Part No. 8732753 ........................................................................................

$567.29

Subject to availability. Prices subject to change without notice.

10

www.titanmachinery.com | Summer 2011

FM-1000™ INTEGRATE

What precision ag

Precision Farming

AgGPS® AF ™ INTEGRATED DISPLAY FM-1000 Fm-1000™What - inTEGRaTED precision agDiSPlay functions do you want to con

With industry-leading performance and reliability, the AgGPS® FM-1000™ integrated display can handle all y functions do you wantto yield to control?

The guidance to steering, rate control monitoring; the FM-1000™ integrated display has you covered.

The

With industry-leading performance and reliability,integrated the AgGPS® display FM-1000™makes integrated display can handlechoice all yourtoprecision From changes. it the affordable adopt ag asneeds. technology guidance to steering, rate control to yield monitoring; the FM-1000™ integrated display has you covered. The versatility of the FM-1000™ integrated display makes it the affordable choice to adopt as technology changes.

LARGEST COLORControl TOUCH up toSCREEN 48 INDIVIDUAL ROWS with the ™ Field-IQ crop available (12.1"/ 30.73 cm) input control system and easy-to-

LARGEST COLOR TOUCH SCREEN available (12.1"/ 30.73 cm)

LB25 LIGHTBARS can be attached to the display or mounted separately

install Tru Count clutches

Yield monitoring to ACCURATELY MONITOR AND MAP harvested crop yield and moisture

LB25 LIGHTBARS can be attached to the display or mounted separately

Two GPS+GLONASS RECEIVERS provide precision with the vehicle, as well as the working implement behind the tractor—where you really need it

Two GPS+GLONASS RECEIVERS provide precision with the vehicle, as well as EASILY PERFORM prescriptiontherate working based controlimplement behind the tractor—where you really need it

CONTROL YOUR RATE when planting, seeding, spraying, spreading and strip tilling with the FM-1000™ integrated display and Rawson™ variable rate drive

95

• Air Cart

• Comple

MA fie

Available accuracies for the FM-1000™ display:

Subject to availability. Prices subject to change without notice.

www.titanmachinery.com | Summer 2011

• Automa

C p s F R

EASILY PERFORM prescriptionbased rate control MANAGES field leveling and

CONTROL YOUR IMPLEMENT with the AgGPS® TrueGuide™ implement guidance and AgGPS® TrueTracker™ implement steering systems

9 $5,

• As-Appl

• Late mo as well equippe

Available accuracies for the FM-1000™ display:

t No

PLANTING

Control®u The AFS Field-IQ™ • Prescrip install Tr

• Allows t perform

CONTROL YOUR IMPLEMENT with the AgGPS® TrueGuide™ implement guidance and AgGPS® TrueTracker™ implement steering systems

Par

This fully For 20 Se

AFS® FIE

DELIVER THE CORRECT AMOUNT OF FERTILIZER real time with the GreenSeeker® nitrogen sensor

field drainage

00 0 -1N903000-20-0 M F . ZT

thro

11

Precision Farming

aFS® PRo 700 - DiSPlay

AFS® Pro 700

You want more power and greater functionality, You Got It. The Case IH AFS Pro 700 display is a 10.4-inch, color display that will replace the AFS Pro 600 color display. The AFS Pro 700 is an ISO11783 compliant, touch screen display that allows the operator to interface with the vehicle and/or implement to view vehicle information, operate the implement to view vehicle information, operate the implement, record data (as-applied), or prescription plant, etc.

New FeAtures •

Enhanced processing capabilities

•

3 video inputs

•

5 different camera layouts

•

Lightweight at only 3.32 lbs.

•

1 GB of internal memory with USB for data transfer

ls ode on!

M l l A So ble your a l i a Av k with ery c n Che Machi ails. t n Tita for de e r Sto

70080 o r P 4107

84 No. AFPS art

2

.8 8 5 7

$4

Subject to availability. Prices subject to change without notice.

12

www.titanmachinery.com | Summer 2011

CNH ORIGINALCNH PARTS REMAN PARTS ENGINESREMAN ENGINES ORIGINAL

Titan access account

Run wiTH REman

If your machine’s engine have the pull doesn’t it used tohave because it’s worn out…RUN WITH Ait’s worn out…RUN WITH A If yourdoesn’t machine’s engine the pull it used to because REMAN ENGINE from Case IH. Reduce down time with a lower cost alternative than a new REMAN ENGINE from Case IH. Reduce down time with a lower cost alternative than a new engine, with the same warranty as new.*

engine, with the same warranty as new.*

Ask us today about our full range of remanufactured parts to keep you up and running.

Ask us today about our full range of remanufactured parts to keep you up and running.

DEALER NAME ADDRESS (000) 000-0000

DEALER NAME ADDRESS (000) 000-0000

* One year parts and labor warranty when installed by a Case IH dealer. © 2007 CNH America LLC. All rights reserved. Case IH is a registered trademark of CNH America LLC.

* One year parts and labor warranty when installed by a Case IH dealer. © 2007 CNH America LLC. All rights reserved. Case IH is a registered trademark of CNH America LLC.

Subject to availability. Prices subject to change without notice.

www.titanmachinery.com | Summer 2011

13

Tillage

EaRTH mETal® culTivaToR SwEEPS maXXi-wiDTH™ SwEEP

chisel Plow Sweep Current Case IH models and most all makes applications Size

thicKNeSS

hoLe SPaciNg

SteM aNgLe

Part No.

Price

8'

1/4''

2-1/4'' to 2-1/2''

50°

133765A1

$15.07

10'

1/4''

2-1/4'' to 2-1/2''

50°

133766A1

$15.30

12'

1/4''

2-1/4'' to 2-1/2''

50°

133767A1

$15.53

14'

1/4''

2-1/4'' to 2-1/2''

50°

133768A1

$15.75

16'

1/4''

2-1/4'' to 2-1/2''

50°

133769A1

$17.43

18'

1/4''

2-1/4'' to 2-1/2''

50°

133770A1

$17.43

12'

5/16''

2-1/4'' to 2-1/2''

50°

248523A1

$19.54

14'

5/16''

2-1/4'' to 2-1/2''

50°

248524A1

$19.82

16'

5/16''

2-1/4'' to 2-1/2''

50°

248525A1

$19.96

18'

5/16''

2-1/4'' to 2-1/2''

50°

248526A1

$22.76

maXXi-GRiP™ SwEEP Sweeps Size

Part No.

Price

8'' x 6.5mm

380434A1

$11.36

9'' x 6.5mm

380435A1

$12.06

10.5'' x 6.5mm

380436A1

$17.68

Adapter with gripper strips less hardware

400309A1

$9.94

Heavy-Duty cast adapter

(aDaPTER anD mounTinG HaRDwaRE)

Size

Part No.

Price

8'' x 6.5mm

403376A1

$16.65

9'' x 6.5mm

403377A1

$16.40

10.5'' x 6.5mm

403378A1

$14.59

maXXi-PoinT™ SwEEP

maxxi-Point • New heavy-duty sweep • Extended nose with 1/2'' wear point for increased wear life and protection • Constant width wing design Size

Part No.

Price

7.3'' x 6.5mm

372560A1

$9.34

9.3'' x 6.5mm

372561A1

$9.78

11.3'' x 6.5mm

372562A1

$10.76

maXXi-PoinT PluS™ SwEEP

maxxi-Point Plus • Same outstanding design and manufacturing features as the Maxxi-point sweeps, PLUS a new two-part design to reduce replacement time • Mounts to heavy-duty cast adapter. Easy to install.

Easy to replace deScriPtioN

Part No.

Price

7.3'' Sweep

87460413

$10.97

9.3'' Sweep

87460414

$11.58

Adapter with gripper strips, less hardware

400309A1

$9.94

Gripper Strip Kit (includes 10 gripper strips)

403375A1

$9.05 Subject to availability. Prices subject to change without notice.

14

www.titanmachinery.com | Summer 2011

the New CuttiNg edge: suPer shArP™ eArth MetAl disKs

Tillage

DiSK HaRRowS

Step up to the cutting edge.

Super Sharp edges process and size the residue of the toughest, genetically-engineered BT corn and soybean crop residue, as well as wheat and barley straw. They survive rocky conditions with no chipping or cracking, thanks to the superior quality of Earth Metal alloy conditions steel. Super Sharp edges are machined to tight tolerances to provide 100% residue cutting.

• Up to 5 times sharper than standard edges • Penetrate hard soils with less weight, less draft and less horsepower for less fuel use • Designed to remain strong and tough • Manufactured with time-tested Earth Metal alloy steel • Available for Case IH and most other brands of harrows

now available: New super sharp disc blades. Ask your titan Machinery dealer ealer for more details. deScr.

thicKNeSS

aPPLicatioN

Part No.

Price

20'' Solid

4.5mm (7 gauge)

Case IH & IH disks with 1-1/8'' sq. axle; 496-490-485-480-475-470-370-596-37

482973R1

$27.15

22'' Solid

5mm (6 gauge)

Case IH & IH disks with 1-1/8'' sq. axle; 496-490-480-475-470-37

482975R1

$33.39

22'' Solid

5mm (6 gauge)

Case IH disks with 1-1/4'' axle; 3900-3800-496CG-475CG

31000R1

$34.57

18'' Solid

4mm (6 gauge)

Case IH & IH disks with 1-1/8'' sq. axle; 496-490-480-475-470-370-37

87618082

$29.46

20'' Notched

4.5mm (7 gauge)

Case IH & IH disks with 1-1/8'' sq. axle; 496-490-485-480-475-470-370-596-37

482974R1

$33.38

22'' Notched

5mm (6 gauge)

Case IH & IH disks with 1-1/8'' sq. axle; 496-490-480-475-470-37

482976R1

$40.46

22'' Solid

6.5mm (1/4'')

Case IH disks with 1-1/4'' axle; 3900-3800-496CG

31217R2

$42.46

deScr.

thicKNeSS

aPPLicatioN

Part No.

Price

20'' Solid

4.5mm (7 gauge)

Deere, Bush Hog, Kenwanee and others

30922R1

$33.98

22'' Solid

5mm (6 gauge)

Krause, Sunflower and others

960968R4

$34.48

20'' Solid

4.5mm (7 gauge)

Krause, Sunflower and others

998809R1

$34.72

22'' Notched

5mm (6 gauge)

Deere, Bush Hog and others

955510R4

$49.25

24'' Solid

6.5mm (6 gauge)

Deere, Bush Hog and others

998865R3

$59.48

CriMPed-CeNter disK blAdes For CAse ih

disK blAdes For other Models

Subject to availability. Prices subject to change without notice.

www.titanmachinery.com | Summer 2011

15

PreSorted StaNdard US Postage

Paid

Fargo, ND Permit No. 54

Roseau Thief River Falls

MONTANA MONTANA NORTH DAKOTA

Mayville Arthur

our

Jamestown Casselton Mandan (Twin City Imp) Lisbon Kintyre LaMoure TM Wahpeton RI Wahpeton Wishek Fergus Falls Kulm Lidgerwood Elbow Lake Britton Graceville Aberdeen (HC Clark Imp) Aberdeen 29 Watertown Milbank Redfield Redwood Falls Highmore

ty ck a l e h C loca

y iner h c a nM Tita Store tails e the r all

fo

d

Huron

Pierre

Miller

SOUTH DAKOTA 25

CASE CE

CASE IH AG

NEW HOLLAND CE

IOWA Anthon 712-373-5231 AvocA 712-343-6351 BlAirstown 319-454-6281

oskAloosA 641-673-7102

pipestone 507-825-5155

pellA 641-628-2131

redwood fAlls 507-637-2978

wAverly 319-352-5872

roseAu 218-463-1781

MINNESOtA

thief river fAlls 218-681-1423

cherokee 712-225-5500

crookston 218-281-4668

Greenfield 641-743-6113

elBow lAke 218-685-4467

Grundy center 319-824-3803

ferGus fAlls 218-736-5496

iowA fAlls 641-648-4231 kinGsley 712-378-3731 le MArs 712-546-8838

GrAceville 320-748-7277 MArshAll 507-532-5783 MoorheAd 218-287-8010

Grand Island

Lexington Holdrege

center point 319-849-3889

Le Mars

NEBRASKA fAirBAnks int hAstinGs 402-463-0544 fAirBAnks int holdreGe 308-995-4448 fAirBAnks int keArney 308-237-3128 fAirBAnks int lexinGton 308-324-5553 fAirBAnks int north plAtte 308-532-6571

9

Albert Lea 9

39

Cherokee Grundy Anthon Center Des Moines Avoca

Kearney

AdA 218-784-2321

Marshall Pipestone

Kingsley

NEBRASKA

NEW HOLLAND AG

WISCONSIN Twin Cities

90

Tri-State Equipment

North Platte

OUTLET STORE

MINNESOTA

Grand Forks Crookston Winger Ada Moorhead

Greenfield

IOWA

Waverly Iowa Falls

39

Center Point Pella

80

Oskaloosa

Hastings

NORtH DAKOtA

wishek 701-452-2262

Arthur 701-967-8318

SOUtH DAKOtA

cAsselton 701-347-4671

ABerdeen 605-225-0505

GrAnd forks 701-775-8111

Britton 605-448-2277

JAMestown 701-252-8200

hiGhMore 605-852-2217

kulM 701-647-2442

huron 604-352-8554

lAMoure 701-883-5286

MilBAnk 605-432-4576

lidGerwood 701-538-4571

pierre 605-224-9247

lisBon 701-683-4000

redfield 605-472-0810

MAyville 701-788-3900

wAtertown 605-886-5741

wAhpeton 701-642-8424