Full Line Catalogue
Product Index 2pc Toilets
Concealed Trapway
Carlin................................................................... 3
Cali...................................................................... 59
Cody................................................................... 5
Cayla................................................................... 61
6Lpf / 1.6Gpf
Crista................................................................... 7
4.8Lpf / 1.28Gpf
Toilet Seats
4.8Lpf / 1.28Gpf
Plastic
Carlin................................................................... 9
Round Front........................................................ 63
Caven................................................................. 11
Elongated Front................................................. 65
Cody................................................................... 13 Crista................................................................... 15
Bidet
Additional Componenets
Cambrie.............................................................. 69
Cale..................................................................... 67
Additional Components................................... 17
6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf Carson................................................................. 19 Camri................................................................... 21 Cullen.................................................................. 23
3.8Lpf / 1Gpf Cadell................................................................. 25 Cato.................................................................... 27 Clancy................................................................. 29 Case.................................................................... 31
Total Toilets Carlin 6Lpf / 1.6 Gpf.......................................... 33 Carlin 4.8Lpf / 1.28Gpf...................................... 35 Caven 4.8Lpf / 1.28Gpf..................................... 37 Cody 4.8Lpf / 1.28Gpf....................................... 39 Crista 4.8Lpf / 1.28Gpf....................................... 41 Carson 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf............. 43
Drop-In Sinks Catalina.............................................................. 71 Cailyn.................................................................. 73 Curtis.................................................................... 75
Undermount Sinks Connor................................................................ 77 Calvin.................................................................. 79 Camden............................................................. 81 Catena................................................................ 83 Collette............................................................... 85
Pedestal Lavatories Caprice............................................................... 87 Carley.................................................................. 89 Calena................................................................ 91
Light Commercial Products Cornell................................................................. 93
1pc Toilets
Carlo.................................................................... 95
6Lpf / 1.6Gpf
Carlton................................................................ 97
Chloe................................................................... 45
Canata............................................................... 99
Caden................................................................. 47
Colter.................................................................. 101
1pc Toilets
4.8Lpf / 1.28Gpf Chloe................................................................... 49 Caden................................................................. 51 Caldwell.............................................................. 53
4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf Claire................................................................... 55 Canby................................................................. 57
www.contrac.ca
Clay..................................................................... 103 Clark.................................................................... 105 Cleo..................................................................... 107 Chane................................................................. 109 Caledon.............................................................. 111 Chelsea............................................................... 113 Cassidy................................................................ 115 Carmin................................................................ 117 Clayton............................................................... 119
Issued: May 2014
Carlin
4722BFT - Bowl 4721BFT - Lined Tank 4721BFTU - Unlined Tank
TESTED
6Lpf / 1.6Gpf 2pc Round Front Regular Height
ÉPREUVE
800g
Features
Compliance Certifications
• Low consumption toilet • 6Lpf / 1.6Gpf • Round front bowl • Vitreous china • 15½" Bowl height • Chrome tank lever • 12" (305mm) Rough-in • Refer to page 17 for additional tank options • 2" Fully glazed ball pass trapway • Siphon jet flush action • Water surface (210mm x 156mm) 8¼" x 6¼" • 440mm(W) x 670mm(D) x 765mm(H) 17¼"(W) x 26⅜"(D) x 30⅛"(H)
Meets or exceeds the following: • • • •
IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Round front (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
3
CARLIN
6Lpf / 1.6Gpf 2PC ROUND FRONT REGULAR HEIGHT 4722BFT
Bowl
4721BFT
Lined Tank
4721BFTU
Unlined Tank
Product Specs: · Low consumption toilet · 6Lpf / 1.6Gpf · Round front bowl · Vitreous china · 15½" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · Siphon jet flush action
Colours To Be Specified:
· Water surface (210mm x 156mm) 8¼" x 6¼ "
Colour:
· Toilet seat not included
Soft White Bone (055)*
Overall Dimensions:
Biscuit (066)*
440mm(W) x 670mm(D) x 765mm(H) 17¼"(W) x 26⅜"(D) x 30⅛"(H)
Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 · MaP tested 800g
Notes:
The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*For additional component options and specifications, please visit www.contrac.ca *Bone and Biscuit available through Direct import (CIF) only.
· LEED Compliant
Shipping: Tank
1.93 cube 34 lbs (GW)
Bowl
3.38 cube 46 lbs (GW)
10mm(⅜")
670mm(26⅜")
440mm(17¼")
204mm(8") C/L of seat post holes 140mm(5½") 350mm (13¾")
356mm(14")
Finished Wall
420mm(16½") 630mm(25")
765mm (30⅛") 393mm (15½")
235mm(9¼")
500mm(19⅝") 305mm(12")
Finished Floor
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Cody
4722BET - Bowl 4721BFT - Lined Tank 4721BFTU - Unlined Tank
6Lpf / 1.6Gpf 2pc Elongated Regular Height
Features
Compliance Certifications
• Low consumption toilet • 6Lpf / 1.6Gpf • Elongated bowl • Vitreous china • 15½" Bowl height • Chrome tank lever • 12" (305mm) Rough-in • Refer to page 17 for additional tank options • 2" Fully glazed ball pass trapway • Siphon jet flush action • Water surface (218mm x 165mm) 8½" x 6½" • 440mm(W) x 725mm(D) x 760mm(H) 17¼"(W) x 28½"(D) x 30"(H)
Meets or exceeds the following: • • • •
IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Elongated (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
5
CODY
6Lpf / 1.6Gpf 2PC ELONGATED REGULAR HEIGHT 4722BET
Bowl
4721BFT
Lined Tank
4721BFTU
Unlined Tank
Product Specs: · Low consumption toilet · 6Lpf / 1.6Gpf · Elongated bowl · Vitreous china · 15½" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · Siphon jet flush action
Colours To Be Specified:
· Water surface (218mm x 165mm) 8½" x 6½"
Colour:
· Toilet seat not included
Soft White Bone (055)* Biscuit (066)*
Overall Dimensions: 440mm(W) x 725mm(D) x 760mm(H) 17¼"(W) x 28½"(D) x 30"(H)
Compliance Certifications:
Notes:
· IAPMO cUPC
The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
· ASME A112.19.2 / CSA B45.1-2008
*For additional component options and specifications, please visit www.contrac.ca
· MaP tested 800g
*Bone and Biscuit available through Direct import (CIF) only.
Meets or exceeds the following:
· LEED Compliant 10mm(⅜")
Shipping: Tank
1.93 cube 34 lbs (GW)
Bowl
3.58 cube 48 lbs (GW)
725mm(28½")
440mm(17¼")
204mm(8")
C/L of Seat Post Holes 140mm(5½") 350mm (13¾")
Finished Wall
470mm(18½")
356mm(14")
690mm(27⅛")
760mm (30") 393mm (15½")
245mm(9⅝")
520mm(20½")
Finished Floor
305mm(12") C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Crista
4722BIT - Bowl 4721BFT - Lined Tank 4721BFTU - Unlined Tank
6Lpf / 1.6Gpf 2pc 17" High Elongated
Features
Compliance Certifications
• Low consumption toilet • 6Lpf / 1.6Gpf • Elongated bowl • Vitreous china • 17" Bowl height • Chrome tank lever • 12" (305mm) Rough-in • Refer to page 17 for additional tank options • 2" Fully glazed ball pass trapway • Siphon jet flush action • Water surface (240mm x 160mm) 9½" x 6¼" • 440mm(W) x 740mm(D) x 790mm(H) 17¼"(W) x 29⅛"(D) x 31"(H)
Meets or exceeds the following: • • • • •
IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 800g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Elongated (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
7
CRISTA
6Lpf / 1.6Gpf 2PC 17" HIGH ELONGATED 4722BIT
Bowl
4721BFT
Lined tank
4721BFTU
Unlined tank
Product Specs: · Low consumption toilet · 6Lpf / 1.6Gpf · Elongated bowl · Vitreous china · 17" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · Siphon jet flush action · Water surface (240mm x 160mm) 9½" x 6¼"
Colours To Be Specified:
· Toilet seat not included
Colour:
Soft White Bone (055)*
Overall Dimensions:
Biscuit (066)*
440mm(W) x 740mm(D) x 790mm(H) 17¼"(W) x 29⅛"(D) x 31"(H)
Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1 · MaP tested 800g
Notes:
The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.
*For additional component options and specifications, please visit www.contrac.ca
· LEED Compliant
*Bone and Biscuit available through Direct import (CIF) only.
Shipping: Tank
1.93 cube 34 lbs (GW)
Bowl
3.96 cube 50 lbs (GW)
10mm(⅜") 740mm(29⅛")
440mm(17¼")
204mm(8")
C/L of Seat Post Holes 140mm(5½") 350mm (13¾")
Finished Wall
470mm(18½")
356mm(14")
695mm(27⅜")
790mm (31") 432mm (17")
245mm(9⅝")
520mm(20½")
Finished Floor
305mm(12") C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Carlin
4722BFV - Bowl 4721BFV - Lined Tank 4721BFVU - Unlined Tank
TESTED
4.8Lpf / 1.28Gpf 2pc Round Front Regular Height
ÉPREUVE
1000g
Features
Compliance Certifications
• High efficiency toilet • 4.8Lpf / 1.28Gpf • Round front bowl • Vitreous china • 15½" Bowl height • Chrome tank lever • 12" (305mm) Rough-in • Refer to page 17 for additional tank options • 2" Fully glazed ball pass trapway • 3" Flapper • Siphon jet flush action • Water surface (209mm x 155mm) 8¼" x 6⅛" • 440mm(W) x 670mm(D) x 765mm(H) 17¼"(W) x 26⅜"(D) x 30⅛"(H)
Meets or exceeds the following: • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 1000g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Round front (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
9
CARLIN
4.8Lpf / 1.28Gpf 2PC ROUND FRONT REGULAR HEIGHT 4722BFV
Bowl
4721BFV
Lined Tank
4721BFVU
Unlined Tank
Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Round front bowl · Vitreous china · 15½" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper
Colours To Be Specified:
· Siphon jet flush action
Colour:
· Water surface (209mm x 155mm) 8¼" x 6⅛"
Soft White Bone (055)*
· Toilet seat not included
Biscuit (066)*
Overall Dimensions: 440mm(W) x 670mm(D) x 765mm(H) 17¼"(W) x 26⅜"(D) x 30⅛"(H)
Compliance Certifications:
Notes:
The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Meets or exceeds the following:
*For additional component options and specifications, please visit www.contrac.ca
· IAPMO cUPC
*Bone and Biscuit available through Direct import (CIF) only.
· US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008 440mm(17¼")
· MaP tested 1000g
10mm(⅜")
670mm(26⅜") 204mm(8")
· LEED Compliant
Shipping: Tank Bowl
C/L of seat post holes 140mm(5½")
1.93 cube 34 lbs (GW)
350mm (13¾")
3.38 cube 46 lbs (GW) 356mm(14")
Finished Wall
420mm(16½") 630mm(25")
765mm (30⅛") 393mm (15½")
235mm(9¼")
500mm(19⅝") 305mm(12")
Finished Floor
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Caven
4722BRV - Bowl 4721BFV - Lined Tank 4721BFVU - Unlined Tank
TESTED
4.8Lpf / 1.28Gpf 2pc 17" High Round Front
ÉPREUVE
800g
Features
Compliance Certifications
• High efficiency toilet • 4.8Lpf / 1.28Gpf • Round front bowl • Vitreous china • 17" Bowl height • Chrome tank lever • 12" (305mm) Rough-in • Refer to page 17 for additional tank options • 2" Fully glazed ball pass trapway • 3" Flapper • Siphon jet flush action • Water surface (220mm x 160mm) 8⅝" x 6¼" • 440mm(W) x 702mm(D) x 800mm(H) 17¼"(W) x 27⅝"(D) x 31½"(H)
Meets or exceeds the following: • • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 800g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Round front (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
11
CAVEN
4.8Lpf / 1.28Gpf 2PC 17" HIGH ROUND FRONT 4722BRV
Bowl
4721BFV
Lined Tank
4721BFVU
Unlined Tank
Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Round front bowl · Vitreous china · 17" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper
Colours To Be Specified:
· Siphon jet flush action
Colour:
· Water surface (220mm x 160mm) 8⅝" x 6¼"
Soft White Bone (055)*
· Toilet seat not included
Biscuit (066)*
Overall Dimensions: 440mm(W) x 702mm(D) x 800mm(H) 17¼"(W) x 27⅝"(D) x 31½"(H)
Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense
Notes:
The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.
*For additional component options and specifications, please visit www.contrac.ca
· ASME A112.19.2 /
*Bone and Biscuit available through Direct import (CIF) only.
CSA B45.1-2008
10mm(⅜")
· ADA Guidelines & ANSI A117.1
702mm(27⅝")
440mm(17¼")
204mm(8")
· MaP tested 800g · LEED Compliant
C/L of seat post holes 140mm(5½")
Shipping: Tank
1.93 cube 34 lbs (GW)
Bowl
4.6 cube 56 lbs (GW)
350mm (13¾")
356mm(14")
Finished Wall
420mm(16½") 660mm(26")
800mm (31½") 432mm (17")
247mm(9¾")
528mm(20¾") 305mm(12")
Finished Floor
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Cody
4722BEV - Bowl 4721BFV - Lined Tank 4721BFVU - Unlined Tank
TESTED
4.8Lpf / 1.28Gpf 2pc Elongated Regular Height
ÉPREUVE
800g
Features
Compliance Certifications
• High efficiency toilet • 4.8Lpf / 1.28Gpf • Elongated bowl • Vitreous china • 15½" Bowl height • Chrome tank lever • 12" (305mm) Rough-in • Refer to page 17 for additional tank options • 2" Fully glazed ball pass trapway • 3" Flapper • Siphon jet flush action • Water surface (216mm x 165mm) 8½" x 6½" • 440mm(W) x 725mm(D) x 760mm(H) 17¼"(W) x 28½"(D) x 30"(H)
Meets or exceeds the following: • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Elongated (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
13
CODY
4.8Lpf / 1.28Gpf 2PC ELONGATED REGULAR HEIGHT 4722BEV
Bowl
4721BFV
Lined Tank
4721BFVU
Unlined Tank
Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Elongated bowl · Vitreous china · 15½" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper
Colours To Be Specified:
· Siphon jet flush action
Colour:
· Water surface (216mm x 165mm) 8½" x 6½"
Soft White Bone (055)*
· Toilet seat not included
Biscuit (066)*
Overall Dimensions: 440mm(W) x 725mm(D) x 760mm(H) 17¼"(W) x 28½"(D) x 30"(H)
Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense
Notes:
The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*For additional component options and specifications, please visit www.contrac.ca *Bone and Biscuit available through Direct import (CIF) only.
· ASME A112.19.2 /
10mm(⅜")
CSA B45.1-2008 · MaP tested 800g
725mm(28½")
440mm(17¼")
204mm(8")
· LEED Compliant
Shipping: Tank
1.93 cube 34 lbs (GW)
Bowl
3.58 cube 48 lbs (GW)
C/L of Seat Post Holes 140mm(5½") 350mm (13¾")
Finished Wall
470mm(18½")
356mm(14")
690mm(27⅛")
760mm (30") 393mm (15½")
245mm(9⅝")
520mm(20½")
Finished Floor
305mm(12") C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Crista
4722BHV - Bowl 4721BFV - Lined Tank 4721BFVU - Unlined Tank
TESTED
4.8Lpf / 1.28Gpf 2pc 17" High Elongated
ÉPREUVE
1000g
Features
Compliance Certifications
• High efficiency toilet • 4.8Lpf / 1.28Gpf • Elongated bowl • Vitreous china • 17" Bowl height • Chrome tank lever • 12" (305mm) Rough-in • Refer to page 17 for additional tank options • 2" Fully glazed ball pass trapway • 3" Flapper • Siphon jet flush action • Water surface (216mm x 155mm) 8½" x 6⅛" • 440mm(W) x 740mm(D) x 790mm(H) 17¼"(W) x 29⅛"(D) x 31"(H)
Meets or exceeds the following: • • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 1000g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Elongated (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
15
CRISTA
4.8Lpf / 1.28Gpf 2PC 17" HIGH ELONGATED 4722BHV
Bowl
4721BFV
Lined Tank
4721BFVU
Unlined Tank
Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Elongated bowl · Vitreous china · 17" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper
Colours To Be Specified:
· Siphon jet flush action
Colour:
· Water surface (216mm x 155mm) 8½" x 6⅛"
Soft White Bone (055)*
· Toilet seat not included
Biscuit (066)*
Overall Dimensions: 440mm(W) x 740mm(D) x 790mm(H) 17¼"(W) x 29⅛"(D) x 31"(H)
Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense
Notes:
The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.
*For additional component options and specifications, please visit www.contrac.ca
· ASME A112.19.2 /
*Bone and Biscuit available through Direct import (CIF) only.
CSA B45.1-2008
10mm(⅜")
· ADA Guidelines &
740mm(29⅛")
440mm(17¼")
ANSI A117.1
204mm(8")
· MaP tested 1000g · LEED Compliant
C/L of Seat Post Holes 140mm(5½")
Shipping: Tank
1.93 cube 34 lbs (GW)
Bowl
3.96 cube 50 lbs (GW)
350mm (13¾")
Finished Wall
470mm(18½")
356mm(14")
695mm(27⅜")
790mm (31") 432mm (17")
245mm(9⅝")
520mm(20½")
Finished Floor CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
305mm(12") C/L of Outlet Revised: January 2014
Additional Components 6Lpf / 1.6Gpf Tanks
Right Hand Lever
10" Rough-In
14" Rough-In
Locking Tank
4721BFTU-RH Unlined Tank
4700BFT Lined Tank 4700BFTU Unlined Tank
4724BFT Lined Tank 4724BFTU Unlined Tank
4721BFT-L Lined Tank 4721BFTU-L Unlined Tank
• Soft White vitreous china. • All 6Lpf/1.6Gpf tanks are compatible with 6Lpf/1.6Gpf Carlin, Cody and Crista toilet bowls excluding Total Toilet models.
4.8Lpf / 1.28Gpf Tanks
Right Hand Lever
Low Profile Tank
10" Rough-In
14" Rough-In
Locking Tank
4721BFVU-RH Unlined Tank
4721BFVU-LT Unlined Tank
4700BFVU Unlined Tank
4724BFV Lined Tank 4724BFVU Unlined Tank
4721BFV-L Lined Tank 4721BFVU-L Unlined Tank
• Soft White vitreous china. • All 4.8Lpf/1.28Gpf tanks are compatible with 4.8Lpf/1.28Gpf Carlin, Caven, Cody and Crista toilet bowls excluding Total Toilet models.
*For further details and specifications, please visit www.contrac.ca
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possibl possible. Bone and Biscuit available through Direct import (CIF) only.
Revised: January 2014
17
This page intentionally left blank.
Š Copyright ContracŽ 2014. All rights reserved.
Carson 4720BFW
Lined Tank / Bowl
4720BFWU
6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf 2pc Round Front Dual Flush Regular Height
Unlined Tank / Bowl
TESTED
ÉPREUVE
1000g (Lined Tank)
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
High efficiency dual flush toilet 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf Round front bowl Vitreous china 15½" Bowl height Soft white top push button 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Dual flush valve Siphon jet flush action Water surface (225mm x 160mm) 8⅞" x 6¼" 440mm(W) x 690mm(D) x 805mm(H) 17¼"(W) x 27⅛"(D) x 31⅝"(H)
• • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 1000g (Lined tank) MaP tested 800g (Unlined tank) LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Round front (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
19
CARSON
6Lpf / 1.6Gpf OR 3Lpf / 0.8Gpf 2PC ROUND FRONT DUAL FLUSH REGULAR HEIGHT 4720BFW
Lined Tank
4720BFWU
Unlined Tank
Product Specs: · High efficiency dual flush toilet · 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf · Round front bowl · Vitreous china · 15½" Bowl height · Soft white top push button · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway · 3" Dual flush valve
Colours To Be Specified:
· Siphon jet flush action
Colour:
Soft White
· Water surface (225mm x 160mm) 8⅞" x 6¼"
Bone (055)*
· Toilet seat not included
Biscuit (066)*
Overall Dimensions: 440mm(W) x 690mm(D) x 805mm(H)
Notes:
17¼"(W) x 27⅛"(D) x 31⅝"(H)
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Compliance Certifications: Meets or exceeds the following:
*Bone and Biscuit available through Direct import (CIF) only.
· IAPMO cUPC · US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008
440mm(17¼")
· MaP tested 1000g
10mm(⅜")
690mm(27⅛") 204mm(8")
(Lined tank) C/L of Seat Post Holes 140mm(5½")
· MaP tested 800g (Unlined tank) · LEED Compliant
356mm (14")
Cube
6.08
GW
78 lbs
Finished Wall
420mm(16½")
Shipping: 356mm(14")
805mm (31⅝")
657mm(25⅞") 395mm (15½")
252mm(9⅞")
530mm(20⅞") 305mm(12") Finished Floor
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Camri 4720BEW
Lined Tank / Bowl
4720BEWU
6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf 2pc Elongated Dual Flush Regular Height
Unlined Tank / Bowl
TESTED
ÉPREUVE
800g
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
High efficiency dual flush toilet 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf Elongated bowl Vitreous china 15½" Bowl height Soft white top push button 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Dual flush valve Siphon jet flush action Water Surface (205mm x 150mm) 8" x 6" 440mm(W) x 743mm(D) x 803mm(H) 17¼"(W) x 29¼"(D) x 31⅝"(H)
• • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Elongated (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
21
CAMRI
6Lpf / 1.6Gpf OR 3Lpf / 0.8Gpf 2PC ELONGATED DUAL FLUSH REGULAR HEIGHT 4720BEW
Lined Tank
4720BEWU
Unlined Tank
Product Specs: · High efficiency dual flush toilet · 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf · Elongated bowl · Vitreous china · 15½" Bowl height · Soft white top push button · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway Colours To Be Specified:
· 3" Dual flush valve
Colour:
· Siphon jet flush action
Soft White Bone (055)*
· Water Surface (205mm x 150mm) 8" x 6"
Biscuit (066)*
· Toilet seat not included
Overall Dimensions: Notes:
440mm(W) x 743mm(D) x 803mm(H)
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
17¼"(W) x 29¼"(D) x 31⅝"(H)
Compliance Certifications:
*Bone and Biscuit available through Direct import (CIF) only.
Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense
743mm(29¼")
· ASME A112.19.2 / CSA B45.1-2008
10mm(⅜")
205mm (7⅞")
440mm(17¼")
· MaP tested 800g C/L of Seat post holes 140mm(5½")
· LEED Compliant
Shipping: Cube
6.54
GW
86 lbs
356mm (14")
Finished Wall
470mm(18½") 803mm (31⅝") 719mm(28⅞")
356mm(14¼")
395mm (15½")
253mm(9⅞")
515mm(20¼") Finished Floor
305mm(12")
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Cullen 4720BIW
Lined Tank / Bowl
4720BIWU
6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf 2pc 17" High Elongated Dual Flush
Unlined Tank / Bowl
TESTED
ÉPREUVE
800g
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
High efficiency dual flush toilet 6Lpf / 1.6Gpf or 3.0Lpf / 0.8Gpf Elongated bowl Vitreous china 17" Bowl height Soft white top push button 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Dual flush valve Siphon jet flush action Water surface (240mm x 165mm) 9½" x 6½" 440mm(W) x 750mm(D) x 800mm(H) 17¼"(W) x 29½"(D) x 31½"(H)
• • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Elongated (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
23
CULLEN
6Lpf / 1.6Gpf OR 3Lpf / 0.8Gpf 2PC 17" HIGH ELONGATED DUAL FLUSH 4720BIW
Lined Tank
4720BIWU
Unlined Tank
Product Specs: · High efficiency dual flush toilet · 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf · Elongated bowl · Vitreous china · 17" Bowl height · Soft white top push button · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway Colours To Be Specified:
· 3" Dual flush valve
Colour:
· Siphon jet flush action
Soft White Bone (055)*
· Water surface (240mm x 165mm) 9½" x 6½"
Biscuit (066)*
· Toilet seat not included
Overall Dimensions: 440mm(W) x 750mm(D) x 800mm(H) 17¼"(W) x 29½"(D) x 31½"(H)
Compliance Certifications: Meets or exceeds the following:
Notes:
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
· IAPMO cUPC · US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008 · MaP tested 800g
750mm(29½")
440mm(17¼")
Cube GW
356mm (14")
6.88
205mm(8")
C/L of Seat post holes 140mm(5½")
· LEED Compliant
Shipping:
10mm(⅜")
Finished Wall 470mm(18½")
89.23 lbs
356mm(14") 432mm (17")
800mm (31½")
717mm(28¼")
531mm(21")
255mm(10")
305mm(12") Finished Floor
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Cadell
5730BFV - Lined Tank / Bowl 5730BFVU - Unlined Tank / Bowl
3.8Lpf / 1Gpf 2pc Round Front Regular Height
Running change for square foot print
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
High efficiency toilet 3.8Lpf / 1Gpf Round front bowl Vitreous china 15½" Bowl height Soft white tank lever 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water surface (225mm x 160mm) 8⅞" x 6¼" 440mm(W) x 690mm(D) x 803mm(H) 17¼"(W) x 27⅛"(D) x 31⅝"(H)
• • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g MaP Premium certified LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Round front (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
25
CADELL
3.8Lpf / 1Gpf 2PC ROUND FRONT REGULAR HEIGHT 5730BFV 5730BFVU
Lined Tank Unlined Tank
Product Specs: · High efficiency toilet · 3.8Lpf / 1Gpf · Round front bowl · Vitreous china · 15½" Bowl height · Soft white tank lever · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action
Colours To Be Specified:
· Water surface (225mm x 160mm) 8⅞" x 6¼"
Colour:
· Toilet seat not included
Soft White Bone (055)*
Overall Dimensions:
Biscuit (066)*
440mm(W) x 690mm(D) x 803mm(H) 17¼"(W) x 27⅛"(D) x 31⅝"(H)
Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC
Notes:
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
· US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008 · MaP tested 800g · MaP Premium certified
440mm(17¼")
· LEED Compliant
690mm(27⅛")
Shipping: Cube
6.08
GW
97 lbs
10mm(⅜")
202mm(8")
C/L of Seat post holes 140mm (5½") 356mm (14")
Finished wall
420mm(16½")
657mm(25⅝")
356mm(14")
803mm (31⅝")
394mm (15½")
530mm(20⅞")
250mm(9⅞")
Finished floor
305mm(12") C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: May 2014
Cato
5730BEV - Lined Tank / Bowl 5730BEVU - Unlined Tank / Bowl
3.8Lpf / 1Gpf 2pc Elongated Regular Height
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
High efficiency toilet 3.8Lpf / 1Gpf Elongated bowl Vitreous china 15½" Bowl height Soft white tank lever 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water surface (205mm x 150mm) 8" x 6" 440mm(W) x 744mm(D) x 803mm(H) 17¼"(W) x 29¼"(D) x 31½"(H)
• • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g MaP Premium certified LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Elongated (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
27
CATO
3.8Lpf / 1Gpf 2PC ELONGATED REGULAR HEIGHT 5730BEV 5730BEVU
Lined Tank Unlined Tank
Product Specs: · High efficiency toilet · 3.8Lpf / 1Gpf · Elongated bowl · Vitreous china · 15½" Bowl height · Soft white tank lever · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action
Colours To Be Specified:
· Water surface (205mm x 150mm) 8" x 6"
Colour:
· Toilet seat not included
Soft White Bone (055)*
Overall Dimensions:
Biscuit (066)*
440mm(W) x 744mm(D) x 803mm(H) 17¼"(W) x 29¼"(D) x 31½"(H)
Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC
Notes:
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
· US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008 · MaP tested 800g
440mm(17¼")
· MaP Premium certified
744mm(29¼")
10mm(⅜")
202mm(8")
· LEED Compliant C/L of Seat post holes 140mm (5½")
Shipping: Cube
6.54
GW
92 lbs
356mm (14")
Finished wall
470mm(18½")
719mm(28⅜")
356mm(14")
803mm (31½")
392mm (15½")
515mm(20¼")
253mm(9⅞")
Finished floor
305mm(12") C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: May 2014
Clancy
5730BIV - Lined Tank / Bowl 5730BIVU - Unlined Tank / Bowl
3.8Lpf / 1Gpf 2pc 17" High Round Front
Running change for square foot print
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
High efficiency toilet 3.8Lpf / 1Gpf Round front bowl Vitreous china 17" Bowl height Soft white tank lever 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water Surface (220mm x 160mm) 8⅝" x 6¼" 440mm(W) x 702mm(D) x 800mm(H) 17¼"(W) x 27⅝"(D) x 31½"(H)
• • • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 600g MaP Premium certified LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Round front (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
29
CLANCY
3.8Lpf / 1Gpf 2PC 17" HIGH ROUND FRONT 5730BIV 5730BIVU
Lined Tank Unlined Tank
Product Specs: · High efficiency toilet · 3.8Lpf / 1Gpf · Round front bowl · Vitreous china · 17" Bowl height · Soft white tank lever · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action
Colours To Be Specified:
· Water Surface (220mm x 160mm) 8⅝" x 6¼"
Colour:
· Toilet seat not included
Soft White Bone (055)*
Overall Dimensions:
Biscuit (066)*
440mm(W) x 702mm(D) x 800mm(H) 17¼"(W) x 27⅝"(D) x 31½"(H)
Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC
Notes:
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA / ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.
· US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1
*Bone and Biscuit available through Direct import (CIF) only.
· MaP Tested 600g · MaP Premium certified
702mm(27⅝")
· LEED Compliant
440mm(17¼")
6.38
GW
89 lbs
202mm(8")
C/L of Seat post holes 140mm (5½")
Shipping: Cube
10mm(⅜")
356mm (14")
Finished wall
420mm(16½")
660mm(26")
356mm(14") 800mm (31½")
245mm(9⅝" )
430mm (17")
528mm(20⅞") Finished floor
305mm(12") C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Case
5730BOV - Lined Tank / Bowl 5730BOVU - Unlined Tank / Bowl
3.8Lpf / 1Gpf 2pc 17" High Elongated
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
High efficiency toilet 3.8Lpf / 1Gpf Elongated bowl Vitreous china 17" Bowl height Soft white tank lever 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water Surface (220mm x 170mm) 8⅝" x 6⅝" 440mm(W) x 754mm(D) x 802mm(H) 17¼"(W) x 29⅝"(D) x 31½"(H)
• • • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 600g MaP Premium certified LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Elongated (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
31
CASE
3.8Lpf / 1Gpf 2PC 17" HIGH ELONGATED 5730BOV 5730BOVU
Lined Tank Unlined Tank
Product Specs: · High efficiency toilet · 3.8Lpf / 1Gpf · Elongated bowl · Vitreous china · 17" Bowl height · Soft white tank lever · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action
Colours To Be Specified:
· Water Surface (220mm x 170mm) 8⅝" x 6⅝"
Colour:
· Toilet seat not included
Soft White Bone (055)*
Overall Dimensions:
Biscuit (066)*
440mm(W) x 754mm(D) x 802mm(H) 17¼"(W) x 29⅝"(D) x 31½"(H)
Notes:
Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA / ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.
· US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1
*Bone and Biscuit available through Direct import (CIF) only.
· MaP Tested 600g · MaP Premium certified
754mm(29⅝")
· LEED Compliant
440mm(17¼")
6.9
GW
91 lbs
202mm(8")
C/L of Seat post holes 140mm (5½")
Shipping: Cube
10mm(⅜")
356mm (14")
Finished wall
470mm(18½")
717mm(28")
356mm(14") 802mm (31½")
430mm (17")
531mm(21")
250mm(9⅞" )
Finished floor
305mm(12") C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Total Toilet Carlin 4720BFT-TT
6Lpf / 1.6Gpf 2pc Round Front Regular Height
Lined Tank / Bowl
Direct import (CIF) only - Please contact your sales representative for further information.
TESTED
ÉPREUVE
800g
Features
Compliance Certifications
• • • • • • • • • • •
Meets or exceeds the following:
Low consumption toilet 6Lpf / 1.6Gpf Round front bowl Vitreous china 15½" Bowl height Chrome tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway Siphon jet flush action Water surface (210mm x 156mm) 8¼" x 6¼" Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat • 440mm(W) x 670mm(D) x 765mm(H) 17¼"(W) x 26⅝"(D) x 30⅛"(H)
• • • •
IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Round front (Included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
33
TOTAL TOILET CARLIN
6Lpf / 1.6Gpf 2PC ROUND FRONT REGULAR HEIGHT 4720BFT-TT
Direct Import (CIF) Only
Lined Tank
Product Specs: · Low consumption toilet · 6Lpf / 1.6Gpf · Round front bowl · Vitreous china · 15½" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · Siphon jet flush action · Water surface (210mm x 156mm) 8¼" x 6¼ "
Colours To Be Specified:
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Colour:
Soft White Bone (055)*
Overall Dimensions:
Biscuit (066)*
440mm(W) x 670mm(D) x 765mm(H) 17¼"(W) x 26⅝"(D) x 30⅛"(H) Notes:
Compliance Certifications:
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008
*Bone and Biscuit available through Direct import (CIF) only.
· MaP tested 800g · LEED Compliant
Shipping: Cube
5.89
GW
80 lbs
10mm(⅜")
670mm(26⅝")
440mm(17¼")
204mm(8") C/L of seat post holes 140mm(5½") 350mm (13¾")
356mm(14")
Finished Wall
420mm(16½") 630mm(25")
765mm (30⅛") 393mm (15½")
235mm(9¼")
500mm(19⅝") 305mm(12")
Finished Floor
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Total Toilet Carlin 4720BFV-TT
Lined Tank / Bowl
4.8Lpf / 1.28Gpf 2pc Round Front Regular Height
Direct import (CIF) only - Please contact your sales representative for further information.
TESTED
ÉPREUVE
1000g
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
High efficiency toilet 4.8Lpf / 1.28Gpf Round front bowl Vitreous china 15½" Bowl height Chrome tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water surface (209mm x 155mm) 8¼" x 6⅛" Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat • 440mm(W) x 670mm(D) x 765mm(H) 17¼"(W) x 26⅜"(D) x 30⅛"(H)
• • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 1000g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Round front (Included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
35
TOTAL TOILET CARLIN
4.8Lpf / 1.28Gpf 2PC ROUND FRONT REGULAR HEIGHT 4720BFV-TT
Direct Import (CIF) Only
Lined Tank
Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Round front bowl · Vitreous china · 15½" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action
Colours To Be Specified:
· Water surface (209mm x 155mm) 8¼" x 6⅛"
Colour:
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Soft White Bone (055)* Biscuit (066)*
Overall Dimensions: 440mm(W) x 670mm(D) x 765mm(H) Notes:
17¼"(W) x 26⅜"(D) x 30⅛"(H)
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Compliance Certifications: Meets or exceeds the following:
*Bone and Biscuit available through Direct import (CIF) only.
· IAPMO cUPC · US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008 · MaP tested 1000g · LEED Compliant
440mm(17¼")
204mm(8")
Shipping: Cube
5.89
GW
80 lbs
10mm(⅜")
670mm(26⅜")
C/L of seat post holes 140mm(5½") 350mm (13¾")
356mm(14")
Finished Wall
420mm(16½") 630mm(25")
765mm (30⅛") 393mm (15½")
235mm(9¼")
500mm(19⅝") 305mm(12")
Finished Floor
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Total Toilet Caven 4720BRV-TT
4.8Lpf / 1.28Gpf 2pc 17" High Round Front
Lined Tank / Bowl
Direct import (CIF) only - Please contact your sales representative for further information.
TESTED
ÉPREUVE
800g
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
High efficiency toilet 4.8Lpf / 1.28Gpf Round front bowl Vitreous china 17" Bowl height Chrome tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water surface (220mm x 160mm) 8⅝" x 6¼" Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat • 440mm(W) x 702mm(D) x 800mm(H) 17¼"(W) x 27⅝"(D) x 31½"(H)
• • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 800g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Round front (Included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
37
TOTAL TOILET CAVEN
4.8Lpf / 1.28Gpf 2PC 17" HIGH ROUND FRONT 4720BRV-TT
Direct Import (CIF) Only
Lined Tank
Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Round front bowl · Vitreous china · 17" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action
Colours To Be Specified:
· Water surface (220mm x 160mm) 8⅝" x 6¼"
Colour:
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Soft White Bone (055)* Biscuit (066)*
Overall Dimensions: 440mm(W) x 702mm(D) x 800mm(H) Notes:
17¼"(W) x 27⅝"(D) x 31½"(H)
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Compliance Certifications: Meets or exceeds the following:
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.
· IAPMO cUPC · US EPA WaterSense
*Bone and Biscuit available through Direct import (CIF) only.
· ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1
10mm(⅜")
702mm(27⅝")
440mm(17¼")
204mm(8")
· MaP tested 800g C/L of seat post holes 140mm(5½")
· LEED Compliant
Shipping: Cube
6.38
GW
89 lbs
350mm (13¾")
356mm(14")
Finished Wall
420mm(16½") 660mm(26")
800mm (31½") 432mm (17")
247mm(9¾")
445mm (17½")
528mm(20¾") 305mm(12")
Finished Floor
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Total Toilet Cody 4720BEV-TT
4.8Lpf / 1.28Gpf 2pc Elongated Regular Height
Lined Tank / Bowl
Direct import (CIF) only - Please contact your sales representative for further information.
TESTED
ÉPREUVE
800g
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
High efficiency toilet 4.8Lpf / 1.28Gpf Elongated bowl Vitreous china 15½" Bowl height Chrome tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water surface (216mm x 165mm) 8½" x 6½" Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat • 440mm(W) x 725mm(D) x 760mm(H) 17¼"(W) x 28½"(D) x 30"(H)
• • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Elongated (Included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
39
TOTAL TOILET CODY
4.8Lpf / 1.28Gpf 2PC ELONGATED REGULAR HEIGHT 4720BEV-TT
Lined Tank
Direct Import (CIF) Only
Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Elongated bowl · Vitreous china · 15½" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action
Colours To Be Specified:
· Water surface (216mm x 165mm) 8½" x 6½"
Colour:
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Soft White Bone (055)* Biscuit (066)*
Overall Dimensions: 440mm(W) x 725mm(D) x 760mm(H) Notes:
17¼"(W) x 28½"(D) x 30"(H)
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC
*Bone and Biscuit available through Direct import (CIF) only.
· US EPA WaterSense · ASME A112.19.2 / 10mm(⅜")
CSA B45.1-2008 · MaP tested 800g · LEED Compliant
725mm(28½")
440mm(17¼")
204mm(8")
Shipping: Cube
6.51
GW
89 lbs
C/L of Seat Post Holes 140mm(5½") 350mm (13¾")
Finished Wall
470mm(18½")
356mm(14")
690mm(27⅛")
760mm (30") 393mm (15½")
245mm(9⅝")
520mm(20½")
Finished Floor
305mm(12") C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Total Toilet Crista 4720BHV-TT
4.8Lpf / 1.28Gpf 2pc 17" High Elongated
Lined Tank / Bowl
Direct import (CIF) only - Please contact your sales representative for further information.
TESTED
ÉPREUVE
1000g
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
High efficiency toilet 4.8Lpf / 1.28Gpf Elongated bowl Vitreous china 17" Bowl height Chrome tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water surface (216mm x 155mm) 8½" x 6⅛" Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat • 440mm(W) x 740mm(D) x 790mm(H) 17¼"(W) x 29⅛"(D) x 31"(H)
• • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 1000g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Elongated (Included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
41
TOTAL TOILET CRISTA
4.8Lpf / 1.28Gpf 2PC 17" HIGH ELONGATED 4720BHV-TT
Direct Import (CIF) Only
Lined Tank
Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Elongated bowl · Vitreous china · 17" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action
Colours To Be Specified:
· Water surface (216mm x 155mm) 8½" x 6⅛"
Colour:
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Soft White Bone (055)* Biscuit (066)*
Overall Dimensions: 440mm(W) x 740mm(D) x 790mm(H) Notes:
17¼"(W) x 29⅛"(D) x 31"(H)
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.
· US EPA WaterSense
*Bone and Biscuit available through Direct import (CIF) only.
· ASME A112.19.2 / 10mm(⅜")
CSA B45.1-2008 · ADA Guidelines & ANSI A117.1
740mm(29⅛")
440mm(17¼")
204mm(8")
· MaP tested 1000g
C/L of Seat Post Holes 140mm(5½")
· LEED Compliant
Shipping: Cube
7.0
GW
91 lbs
350mm (13¾")
Finished Wall
470mm(18½")
356mm(14")
695mm(27⅜")
790mm (31") 432mm (17")
245mm(9⅝")
520mm(20½")
Finished Floor
305mm(12") C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Total Toilet Carson 4720BFW-TT
Lined Tank / Bowl
6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf 2pc Round Front Dual Flush Regular Height
Direct import (CIF) only - Please contact your sales representative for further information.
TESTED
ÉPREUVE
1000g
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
High efficiency dual flush toilet 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf Round front bowl Vitreous china 15½" Bowl height Soft white top push button 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Dual flush valve Siphon jet flush action Water surface (225mm x 160mm) 8⅞" x 6¼" Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat • 440mm(W) x 690mm(D) x 805mm(H) 17¼"(W) x 27⅛"(D) x 31⅝"(H)
• • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 1000g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Round front (Included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
43
TOTAL TOILET CARSON
6Lpf / 1.6Gpf OR 3Lpf / 0.8Gpf 2PC ROUND FRONT DUAL FLUSH REGULAR HEIGHT 4720BFW-TT
Direct Import (CIF) Only
Lined Tank
Product Specs: · High efficiency dual flush toilet · 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf · Round front bowl · Vitreous china · 15½" Bowl height · Soft white top push button · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway · 3" Dual flush valve · Siphon jet flush action
Colours To Be Specified:
· Water surface (225mm x 160mm) 8⅞" x 6¼"
Colour:
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Soft White Bone (055)* Biscuit (066)*
Overall Dimensions: 440mm(W) x 690mm(D) x 805mm(H) Notes:
17¼"(W) x 27⅛"(D) x 31⅝"(H)
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Compliance Certifications: Meets or exceeds the following:
*Bone and Biscuit available through Direct import (CIF) only.
· IAPMO cUPC · US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008 · MaP tested 1000g
10mm(⅜")
690mm(27⅛")
440mm(17¼")
204mm(8")
· LEED Compliant
Shipping: Cube
6.08
GW
78 lbs
C/L of Seat Post Holes 140mm(5½")
356mm (14")
Finished Wall
420mm(16½")
356mm(14")
805mm (31⅝")
657mm(25⅞") 395mm (15½")
252mm(9⅞")
530mm(20⅞") 305mm(12") Finished Floor
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Chloe
5710BFT - Lined Tank 5710BFTU - Unlined Tank*
6Lpf / 1.6Gpf 1pc Round Front Regular Height
*(Direct import (CIF) only - Please contact your sales representative for further information.)
TESTED
ÉPREUVE
600g
Features
Compliance Certifications
• • • • • • • • • • •
Meets or exceeds the following:
Low consumption toilet 6Lpf / 1.6Gpf Round front bowl Vitreous china 15¾" Bowl height Chrome tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway Siphon jet flush action Water Surface (200mm x 150mm) 7⅞" x 6" 429mm(W) x 672mm(D) x 689mm(H) 16⅞"(W) x 26½"(D) x 27⅛"(H)
• • • •
IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 MaP tested 600g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Round front (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
45
CHLOE
6Lpf / 1.6Gpf 1PC ROUND FRONT REGULAR HEIGHT 5710BFT 5710BFTU*
*Direct Import (CIF) Only
Lined Tank Unlined Tank
Product Specs: · Low consumption toilet · 6Lpf / 1.6Gpf · Round front bowl · Vitreous china · 15¾" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · Siphon jet flush action
Colours To Be Specified:
· Water surface (200mm x 150mm) 7⅞" x 6"
Colour:
· Toilet seat not included
Soft White Bone (055)* Biscuit (066)*
Overall Dimensions: 429mm(W) x 672mm(D) x 689mm(H) 16⅞"(W) x 26½"(D) x 27⅛"(H)
Notes:
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC
*Bone and Biscuit available through Direct import (CIF) only.
· ASME A112.19.2 / CSA B45.1-2008 · MaP tested 600g · LEED Compliant
Shipping: Cube
7.48
GW
83 lbs
10mm(⅜") 672mm(26½")
429mm(16⅞")
C/L of Seat Post Holes 140mm(5½")
Finished Wall
420mm(16½")
689mm (27⅛")
265mm(10½")
400mm (15¾")
515mm(20¼") 305mm(12")
Finished Floor
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Caden
5710BET-TS - Lined Tank
6Lpf / 1.6Gpf 1pc Elongated Regular Height
Running change to soft white tank lever TESTED
ÉPREUVE
600g
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
Low consumption toilet 6Lpf / 1.6Gpf Elongated bowl Vitreous china 15¾" Bowl height Soft white tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway Siphon jet flush action Water Surface (275mm x 210mm) 10⅞" x 8¼" Smooth close toilet seat included 423mm(W) x 723mm(D) x 663mm(H) 16⅝"(W) x 28½"(D) x 26⅛"(H)
• • • •
IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 MaP tested 600g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Elongated (Included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
47
CADEN
6Lpf / 1.6Gpf 1PC ELONGATED REGULAR HEIGHT 5710BET-TS
Lined Tank
Product Specs: · Low consumption toilet · 6Lpf / 1.6Gpf · Elongated bowl · Vitreous china · 15¾" Bowl height · Soft white tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · Siphon jet flush action · Water Surface (275mm x 210mm) 10⅞" x 8¼" · Smooth close toilet seat included
Colours To Be Specified:
Overall Dimensions:
Colour:
Soft White Bone (055)*
423mm(W) x 723mm(D) x 663mm(H)
Biscuit (066)*
16⅝"(W) x 28½"(D) x 26⅛"(H)
Compliance Certifications: Notes:
Meets or exceeds the following:
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
· IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 · MaP tested 600g
*Bone and Biscuit available through Direct import (CIF) only.
· LEED Compliant
Shipping: Cube
7.25
GW
90 lbs
10mm(⅜") 723mm(28½")
423mm(16⅝")
C/L of Seat Post Holes 140mm(5½")
Finished Wall
470mm(18½")
400mm 663mm (15¾") (26⅛")
272mm(10¾")
543mm(21⅜") 305mm(12")
Finished Floor
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Chloe
4710BFV - Lined Tank 4710BFVU - Unlined Tank* *(Direct import (CIF) only - Please contact your sales representative for further information.)
TESTED
4.8Lpf / 1.28Gpf 1pc Round Front Regular Height
ÉPREUVE
800g
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
High efficiency toilet 4.8Lpf / 1.28Gpf Round front bowl Vitreous china 15¾" Bowl height Chrome tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water Surface (209mm x 150mm) 8¼" x 6" 429mm(W) x 672mm(D) x 689mm(H) 16⅞"(W) x 26½"(D) x 27⅛"(H)
• • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Round front (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
49
CHLOE
4.8Lpf / 1.28Gpf 1PC ROUND FRONT REGULAR HEIGHT
4710BFV 4710BFVU*
*Direct Import (CIF) Only
Lined Tank Unlined Tank
Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Round front bowl · Vitreous china · 15¾" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper
Colours To Be Specified:
· Siphon jet flush action
Colour:
· Water Surface (209mm x 150mm) 8¼" x 6"
Soft White Bone (055)*
· Toilet seat not included
Biscuit (066)*
Overall Dimensions: 429mm(W) x 672mm(D) x 689mm(H)
Notes:
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
16⅞"(W) x 26½"(D) x 27⅛"(H)
Compliance Certifications:
*Bone and Biscuit available through Direct import (CIF) only.
Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense
10mm(⅜")
· ASME A112.19.2 / CSA B45.1-2008 · MaP Tested 800g
672mm(26½")
429mm(16⅞")
· LEED Compliant C/L of Seat Post Holes 140mm(5½")
Shipping: Cube
8.29
GW
89 lbs
Finished Wall
420mm(16½")
689mm (27⅛")
265mm(10½")
400mm (15¾")
515mm(20¼") 305mm(12")
Finished Floor
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Caden
4710BEV-TS - Lined Tank
TESTED
4.8Lpf / 1.28Gpf 1pc Elongated Regular Height
ÉPREUVE
800g
Features
Compliance Certifications
• • • • • • • • • • • • •
Meets or exceeds the following:
High efficiency toilet 4.8Lpf / 1.28Gpf Elongated bowl Vitreous china 15¾" Bowl height Soft white tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water Surface (230mm x 160mm) 9" x 6¼" Smooth close toilet seat included 423mm(W) x 723mm(D) x 663mm(H) 16⅝"(W) x 28½"(D) x 26⅛"(H)
• • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Elongated (Included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
51
CADEN
4.8Lpf / 1.28Gpf 1PC ELONGATED REGULAR HEIGHT
4710BEV-TS
Lined Tank
Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Elongated bowl · Vitreous china · 15¾" Bowl height · Soft white tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action · Water Surface (230mm x 160mm) 9" x 6¼"
Colours To Be Specified:
· Smooth close toilet seat included
Colour:
Soft White Bone (055)*
Overall Dimensions:
Biscuit (066)*
423mm(W) x 723mm(D) x 663mm(H) 16⅝"(W) x 28½"(D) x 26⅛"(H)
Notes:
Meets or exceeds the following:
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
· IAPMO cUPC
*Bone and Biscuit available through Direct import (CIF) only.
Compliance Certifications:
· US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008 · MaP Tested 800g · LEED Compliant
10mm(⅜") 723mm(28½")
423mm(16⅝")
Shipping: Cube
7.25
GW
90 lbs
C/L of Seat Post Holes 140mm(5½")
Finished Wall
470mm(18½")
400mm 663mm (15¾") (26⅛")
272mm(10¾")
543mm(21⅜") 305mm(12")
Finished Floor
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Caldwell
4710BIV - Lined Tank 4710BIV-L - Lined Locking Tank*
4.8Lpf / 1.28Gpf 1pc 17" High Elongated
*(Direct import (CIF) only - Please contact your sales representative for further information.)
Optional
TESTED
ÉPREUVE
800g
Features
Compliance Certifications
• • • • • • •
Meets or exceeds the following:
• • • • • •
High efficiency toilet 4.8Lpf / 1.28Gpf Elongated bowl Vitreous china 17" Bowl height Chrome top push button Allen key locking mechanism (applicable only on locking tank option) 12" (305mm) Rough-in 2" Fully glazed ball pass trapway 3" Flush valve Siphon jet flush action Water Surface (220mm x 150mm) 8⅝" x 6" 380mm(W) x 735mm(D) x 705mm(H) 15"(W) x 29"(D) x 27¾"(H)
• • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 800g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Elongated (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
53
CALDWELL
4.8Lpf / 1.28Gpf 1PC 17" HIGH ELONGATED
4710BIV
Lined Tank
4710BIV-L*
Lined Locking Tank (optional)
*Direct Import (CIF) Only
Product Specs: Optional
· High efficiency toilet · 4.8Lpf / 1.28Gpf · Elongated bowl · Vitreous china · 17" Bowl height · Chrome top push button · Allen key locking mechanism (applicable only on locking tank option)
Colours To Be Specified:
· 12" (305mm) Rough-in
Colour:
· 2" Fully glazed ball pass trapway
Soft White Bone (055)*
· 3" Flush valve
Biscuit (066)*
· Siphon jet flush action · Water Surface (220mm x 150mm) 8⅝" x 6" · Toilet seat not included
Overall Dimensions: 380mm(W) x 735mm(D) x 705mm(H) 15"(W) x 29"(D) x 27¾"(H)
Compliance Certifications:
Notes:
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.
*Bone and Biscuit available through Direct import (CIF) only.
Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense
10mm(⅜") 735mm(29")
380mm(15")
200mm(8")
· ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1
C/L of Seat Post Holes 140mm(5½")
· MaP tested 800g · LEED Compliant
Shipping: Cube
8.8
GW
85 lbs
Finished Wall
470mm(18½")
356mm(14") 705mm (27¾")
255mm(10")
430mm (17")
560mm(22") 305mm(12")
Finished Floor
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: February 2014
Claire
5710BFX - Lined Tank 5710BFXU - Unlined Tank* *(Direct import (CIF) only - Please contact your sales representative for further information.)
4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf 1pc Round Front Dual Flush Regular Height
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
High efficiency dual flush toilet 4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf Round front bowl Vitreous china 15½" Bowl height Soft white top push button 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Dual flush valve Siphon jet flush action Water Surface (210mm x 155mm) 8¼" x 6⅛" 383mm(W) x 687mm(D) x 730mm(H) 15"(W) x 27"(D) x 28¾"(H)
• • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g MaP Premium certified LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Round front (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
55
CLAIRE
4.8Lpf / 1.28Gpf OR 3Lpf / 0.8Gpf 1PC ROUND FRONT DUAL FLUSH REGULAR HEIGHT 5710BFX
Lined Tank
5710BFXU*
Unlined Tank
*Direct Import (CIF) Only
Product Specs: · High efficiency dual flush toilet · 4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf · Round front bowl · Vitreous china · 15½" Bowl height · Soft white top push button · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway · 3" Dual flush valve
Colours To Be Specified:
· Siphon jet flush action
Colour:
Soft White
· Water Surface (210mm x 155mm) 8¼" x 6⅛"
Bone (055)*
· Toilet seat not included
Biscuit (066)*
Overall Dimensions: 383mm(W) x 687mm(D) x 730mm(H) 15"(W) x 27"(D) x 28¾"(H)
Compliance Certifications: Meets or exceeds the following:
Notes:
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
· IAPMO cUPC · US EPA WaterSense 10mm(⅜")
· ASME A112.19.2 / CSA B45.1-2008 · MaP Tested 800g
687mm(27")
383mm(15")
· MaP Premium certified · LEED Compliant
C/L of Seat Post Holes 140mm(5½")
Shipping: Cube
7.50
GW
88 lbs
Finished Wall
420mm(16½")
730mm (28¾")
243mm(9½")
394mm (15½")
557mm(22") 305mm(12")
Finished Floor
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Canby
5710BEX - Lined Tank 5710BEXU - Unlined Tank* *(Direct import (CIF) only - Please contact your sales representative for further information.)
4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf 1pc Elongated Dual Flush Regular Height
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
High efficiency dual flush toilet 4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf Elongated bowl Vitreous china 15½" Bowl height Soft white top push button 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Dual flush valve Siphon jet flush action Water Surface (225mm x 165mm) 8⅞" x 6½" 385mm(W) x 742mm(D) x 730mm(H) 15⅛"(W) x 29¼"(D) x 28¾"(H)
• • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g MaP Premium certified LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Elongated (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
57
CANBY
4.8Lpf / 1.28Gpf OR 3Lpf / 0.8Gpf 1PC DUAL FLUSH ELONGATED REGULAR HEIGHT 5710BEX
Lined Tank
5710BEXU*
Unlined Tank
*Direct Import (CIF) Only
Product Specs: · High efficiency dual flush toilet · 4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf · Elongated bowl · Vitreous china · 15½" Bowl height · Soft white top push button · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway
Colours To Be Specified:
· 3" Dual flush valve
Colour:
· Siphon jet flush action
Soft White Bone (055)*
· Water Surface (225mm x 165mm) 8⅞" x 6½"
Biscuit (066)*
· Toilet seat not included
Overall Dimensions: 385mm(W) x 742mm(D) x 730mm(H) 15⅛"(W) x 29¼"(D) x 28¾"(H)
Compliance Certifications: Meets or exceeds the following:
Notes:
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
· IAPMO cUPC · US EPA WaterSense
10mm(⅜")
· ASME A112.19.2 / CSA B45.1-2008
742mm(29¼")
385mm(15⅛")
· MaP Tested 800g · MaP Premium certified · LEED Compliant
C/L of Seat Post Holes 140mm(5½")
Shipping: Cube
8.23
GW
88 lbs
Finished Wall
470mm(18½")
730mm (28¾")
246mm(9⅝")
394mm (15½")
560mm(22") 305mm(12")
Finished Floor
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Cali
4710BOV - Lined Tank 4710BOVU - Unlined Tank
4.8Lpf / 1.28Gpf 1pc 16⅞" High Elongated
(Unlined Tank)
Features
Compliance Certifications
• High efficiency toilet • 4.8Lpf / 1.28Gpf • Elongated bowl with concealed skirted trapway • Vitreous china • 16⅞" Bowl height • Soft white tank lever • 12" (305mm) Rough-in • 2" Fully glazed ball pass trapway • 3" Flapper • Siphon jet flush action • Water Surface (240mm x 170mm) 9½" x 6⅝" • Smooth close toilet seat included • 392mm(W) x 725mm(D) x 760mm(H) 15½"(W) x 28½"(D) x 29⅞"(H)
Meets or exceeds the following: • • • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 800g (Lined tank) MaP tested 1000g (Unlined tank) LEED Compliant
Colours Available: Soft white Shape of Toilet Seat: Elongated (Included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
59
CALI
4.8Lpf / 1.28Gpf 1PC 16⅞" HIGH ELONGATED 4710BOV
Lined Tank
4710BOVU Unlined Tank Product Specs: · High efficiency toilet · 4.8Lpf/1.28Gpf · Elongated bowl with concealed skirted trapway · Vitreous china · 16⅞" Bowl height · Soft white tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action · Water surface (240mm x 170mm) 9½" x 6⅝"
Colours ToTo BeBe Specified: Colours Specified:
· Smooth close toilet seat included
Colour: Colour:
Soft White Soft White
Overall Dimensions: 392mm (W) x 725mm (D) x 760mm (H) 15½" (W) x 28½" (D) x 29⅞" (H)
Compliance Certifications: Meets or exceeds the following:
Notes: This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.
· IAPMO cUPC · US EPA WaterSense · ASME A 12.19.2 / CSA B45.1-2008
725mm (28½")
392mm (15½")
10mm(⅜") 200mm (7⅞")
· ADA Guidelines & ANSI A117.1 · MaP tested 800g (Lined tank) · MaP tested 1000g (Unlined tank) · LEED Compliant
760mm (29⅞")
Shipping: Cube
9.39
GW
92.50lbs
Finished Wall
C/L of Seat post holes 140mm(5½")
470mm(18½")
368mm (14⅜") 465mm (18¼") 430mm (16⅞")
275mm (10⅞")
Finished Floor
550mm (21⅝")
305mm (12")
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca Revised: May 2014
Cayla
4782BOV - Bowl 4781BOV- Lined Tank 4781BOVU - Unlined Tank
4.8Lpf / 1.28Gpf 2 pc 16½" High Elongated
Available 2nd Quarter 2014
Features
Compliance Certifications
• High efficiency toilet • 4.8Lpf / 1.28Gpf • Elongated bowl with concealed skirted trapway • Vitreous china • 16½" Bowl height • Soft white tank lever • 12" (305mm) Rough-in • 2" Fully glazed ball pass trapway • 3" Flapper • Siphon jet flush action • Water Surface (240mm x 170mm) 9½" x 6⅝" • Decorative chrome and soft white side caps included • Smooth close toilet seat included • 382mm(W) x 722mm(D) x 788mm(H) 15"(W) x 28½"(D) x 31"(H)
Meets or exceeds the following: • • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 1000g LEED Compliant
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat: Elongated (Included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
61
CAYLA
4.8Lpf / 1.28Gpf 2PC 16½" HIGH ELONGATED 4782BOV
Bowl
4781BOV
Lined Tank
4781BOVU
Unlined Tank
Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Elongated bowl with concealed skirted trapway · Vitreous china · 16½" Bowl height · Soft white tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper
Colours Specified: Colours ToTo BeBe Specified: Colour: Soft White Colour: Soft White
· Siphon jet flush action · Water surface (240mm x 170mm) 9½" x 6⅝"
Bone (055)* Bone (055)* Biscuit (066)* Biscuit (066)*
· Decorative chrome and soft white side caps included · Smooth close toilet seat included
Overall Dimensions: 382mm(W) x 722mm(D) x 788mm(H) 15"(W) x 28½"(D) x 31"(H)
Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense
Notes:
The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.
*Bone and Biscuit available through Direct import (CIF) only.
· ADA Guidelines & ANSI A117.1
10mm(⅜")
722mm(28½")
· ASME A112.19.2 / CSA B45.1-2008 382mm(15")
190mm (7½")
· MaP Tested 1000g · LEED Compliant C/L of Seat Post Holes 140mm(5½")
Shipping: Tank
1.32 cube 30.4 lbs (GW)
Bowl
5.72 cube 88 lbs (GW)
348mm (13¾")
Finished Wall
470mm(18½")
363mm(14¼")
788mm (31") 420mm (16½")
338mm(13⅜")
547mm(21½") Finished Floor
305mm(12") C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Round Front TS6120SC
Toilet Seat
Features • • • • •
Smooth close plastic toilet seat Fits all standard round front toilet bowls Individually boxed 5 Pieces in master carton 365mm(W) x 429mm(D) x 25mm(H) 14⅜"(W) x 16⅞"(D) x 1"(H)
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
63
ROUND FRONT TOILET SEAT
TS6120SC
Round Front
Product Specs: · Smooth close plastic toilet seat · Fits all standard round front toilet bowls · Individually boxed · 5 Pieces in master carton
Overall Dimensions: 365mm(W) x 429mm(D) x 25mm(H) 14⅜"(W) x 16⅞"(D) x 1"(H)
Shipping: Cube GW
Colours To Be Specified:
0.38
Colour:
Soft White
4.5 (Master carton)
Bone (055)*
3.7 lbs
Biscuit (066)*
60 lbs (Master carton) Notes:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
5½"
16⅞" 10¼"
8¼" 14⅜"
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Elongated Front TS7150SC
Toilet Seat
Features • • • • •
Smooth close plastic toilet seat Fits all standard elongated front toilet bowls Individually boxed 5 Pieces in master carton 368mm(W) x 480mm(D) x 25mm(H) 14½"(W) x 18⅞"(D) x 1"(H)
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
65
ELONGATED FRONT TOILET SEAT
TS7150SC
Elongated Front
Product Specs: · Smooth close plastic toilet seat · Fits all standard elongated front toilet bowls · Individually boxed · 5 Pieces in master carton
Overall Dimensions: 368mm(W) x 480mm(D) x 25mm(H) 14½"(W) x 18⅞"(D) x 1"(H)
Shipping: Cube GW
Colours To Be Specified:
0.47
Colour:
Soft White
5.48 (Master carton)
Bone (055)*
4.2 lbs
Biscuit (066)*
45 lbs (Master carton) Notes:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
5½"
18⅞" 12⅜"
8⅝" 14½"
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Cale 4830BLX
4 Hole Bidet
Features
Compliance Certifications
• Vitreous china • 15½" Bowl height • 4 Holes (3 faucet holes with 8" center and 1 small hole for pop-up rod) • Fits deck mounted fitting • Flushing rim • Vertical cleansing spray • Integral overflow • Faucet not included • 374mm(W) x 645mm(D) x 395mm(H) 14¾"(W) x 25⅜"(D) x 15½"(H)
Meets or exceeds the following: • IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
67
CALE
4-HOLE BIDET 4830BLX
4-Hole Bidet
Product Specs: · Vitreous china · 15½" Bowl height · 4 Holes (3 faucet holes with 8" center and 1 small hole for pop-up rod) · Fits deck mounted fitting · Flushing rim · Vertical cleansing spray · Integral overflow · Faucet not included
Overall Dimensions:
Colours To Be Specified:
374mm(W) x 645mm(D) x 395mm(H)
Colour:
14¾"(W) x 25⅜"(D) x 15½"(H)
Soft White Bone (055)* Biscuit (066)*
Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC
Notes:
· ASME A112.19.2 / CSA B45.1 - 2008
▲ Dimensions shown for location of supplies are suggested. "P"trap and fittings not furnished with bidet and must be ordered separately. Provisions must be made for the installation of trap in floor.
Shipping:
• Refer to installation instructions supplied with Bidet and fitting for additional information.
Cube 4.00
*Bone and Biscuit available through Direct import (CIF) only.
GW
44 lbs
Finished Wall
●
65mm (2½")
374mm (14¾")
645mm(25⅜")
395mm (15½")
Wall Supply
Floor Supply
Lag Bolts
125mm(5") 335mm (13⅛")
280mm (11")
Finished Floor
235mm(9¼")
Finished Floor
282mm (11½")
102mm (4")
Ø35mm (1⅜")
Ø64mm (2½")
204mm (8") Ø44mm (1¾")
Ø24mm (1")
Ø24mm (1")
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Cambrie 5810BLX
Single Hole Bidet
Features
Compliance Certifications
• • • •
Meets or exceeds the following:
• • • •
Vitreous china 15⅜" Bowl height Single hole faucet drilling To be installed with horizontal spray bidet faucet Integral overflow Faucet not included 358mm(W) x 555mm(D) x 405mm(H) 14⅛"(W) x 21⅞"(D) x 16"(H)
• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
69
CAMBRIE
SINGLE HOLE BIDET 5810BLX
Single Hole Bidet
Product Specs: · Vitreous china · 15⅜" Bowl height · Single hole faucet drilling · Horizontal cleansing spray · Integral overflow
Overall Dimensions: 358mm(W) x 555mm(D) x 405mm(H) 14⅛"(W) x 21⅞"(D) x 16"(H)
Compliance Certifications: Colours To Be Specified:
Meets or exceeds the following:
Colour:
· IAPMO cUPC
Soft White Bone (055)*
· ASME A112.19.2 / CSA B45.1 - 2008
Biscuit (066)*
Shipping: Cube 3.51 GW
Notes:
44 lbs
▲ Dimensions shown for location of supplies are suggested. "P" trap and fittings not furnished with bidet and must be ordered separately. Provisions must be made for the installation of trap in floor.
*Bone and Biscuit available through Direct import (CIF) only. 405mm (16")
555mm (21⅞") 165mm (6½")
358mm (14⅛") 215mm (8½") 398mm (15⅝")
Floor Supply
Lag Bolts
Wall Supply 125mm(5")
Finished Wall
65mm (2½")
140mm (5½")
Ø10mm (⅜") 365mm (14⅜")
Ø64mm Ø35mm (2½") (1⅜")
Finished Floor
250mm (9⅞")
Finished Floor
Ø44mm (1¾")
245mm (9⅝")
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Catalina 4110BGW - Single Hole 4140BGW - 4" Center 4180BGW - 8" Center
Oval Drop-In Sink
Features
Compliance Certifications
• • • • • •
Meets or exceeds the following:
Vitreous china Front overflow hole Single hole, 4" or 8" faucet center Template supplied Faucet not included 510mm(W) x 430mm(D) x 194mm(H) 20"(W) x 16⅞"(D) x 7⅝"(H)
• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 • ADA Section 4.19
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
71
CATALINA
OVAL DROP-IN SINK 4110BGW
Single Hole
4140BGW
4" Center
4180BGW
8" Center
Product Specs: · Vitreous china · Front overflow hole · Single hole, 4" or 8" faucet center · Template supplied · Faucet not included
Overall Dimensions: 510mm(W) x 430mm(D) x 194mm(H)
Colours To Be Specified:
20"(W) x 16⅞"(D) x 7⅝"(H)
Colour:
Soft White Bone (055)*
Compliance Certifications:
Biscuit (066)*
Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008
Notes:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
· ADA Section 4.19
Shipping: Cube
1.84
GW
17 lbs
This product is designed to comply with ADA requirements, if installed according to the standard. It is the responsibility of the installer to comply with this standard prior to installation
*Bone and Biscuit available through Direct import (CIF) only.
510mm(20")
Single Hole, 102mm(4") or 204mm(8") 3 Holes 32mm(1¼") 62mm (2½") 180mm (7⅛")
44 mm (1¾") 64 mm (2½")
260mm (10¼")
Counter Top
318mm (12½")
204mm (8") Supplies As Required
1¼" O.D. Waste
430mm(16⅞") Counter top cut out 478mm x 394mm (18⅞" x 15½")
195mm 155mm (7⅝") (6⅛")
Overflow Hole Note: Dimensions shown for location of supplied and waste are suggested. CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: May 2014
Cailyn
4110BRW - Single Hole 4140BRW - 4" Center 4180BRW - 8" Center
Round Drop-In Sink
Features
Compliance Certifications
• • • • • •
Meets or exceeds the following:
Vitreous china Front overflow hole Single hole, 4" or 8" faucet center Template supplied Faucet not included 484mm(W) x 484mm(D) x 206mm(H) 19"(W) x 19"(D) x 8⅛"(H)
• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 • ADA Section 4.19
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
73
CAILYN
ROUND DROP-IN SINK 4110BRW
Single Hole
4140BRW
4" Center
4180BRW
8" Center
Product Specs: · Vitreous china · Front overflow hole · Single hole, 4" or 8" faucet center · Template supplied · Faucet not included
Overall Dimensions: 484mm(W) x 484mm(D) x 206mm(H)
Colours To Be Specified:
19"(W) x 19"(D) x 8⅛"(H)
Colour:
Soft White Bone (055)*
Compliance Certifications:
Biscuit (066)*
Meets or exceeds the following: · IAPMO cUPC Notes:
· ASME A112.19.2 / CSA B45.1-2008
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
· ADA Section 4.19
Shipping: Cube
1.27
GW
20 lbs
This product is designed to comply with ADA requirements, if installed according to the standard. It is the responsibility of the installer to comply with this standard prior to installation.
*Bone and Biscuit available through Direct import (CIF) only.
484mm(19")
Single Hole, 102mm(4") or 204mm(8") 3 Holes 32mm(1¼")
181mm (7⅛")
260mm (10¼") 318mm (12½")
Counter Top
204mm (8") Supplies As Required
1¼" O.D. Waste
43 mm (1¾") 64 mm (2½")
484mm(19")
206mm (8⅛") Overflow Hole Note: Dimensions shown for location of supplied and waste are suggested. CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: May 2014
Curtis
4140BEW - 4" Center
Semi-Oval Drop-In Sink
Features
Compliance Certifications
• • • • • •
Meets or exceeds the following:
Vitreous china Front overflow hole 4" Faucet center Template supplied Faucet not included 535mm(W) x 435mm(D) x 205mm(H) 21"(W) x 17¾"(D) x 8"(H)
• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 • ADA Section 4.19
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
75
CURTIS
SEMI-OVAL DROP-IN SINK
4140BEW
4" Center
Product Specs: · Vitreous china · Front overflow hole · 4" Faucet center · Template supplied · Faucet not included
Overall Dimensions: 535mm(W) x 435mm(D) x 205mm(H) 21"(W) x 17¾"(D) x 8"(H)
Compliance Certifications:
Colours To Be Specified: Colour:
Meets or exceeds the following:
Soft White
· IAPMO cUPC
Bone (055)*
· ASME A112.19.2 / CSA B45.1-2008
Biscuit (066)*
· ADA Section 4.19
Shipping: Cube
1.73
GW
17 lbs
Notes:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. This product is designed to comply with ADA requirements, if installed according to the standard. It is the responsibility of the installer to comply with this standard prior to installation.
*Bone and Biscuit available through Direct import (CIF) only.
535mm(21") 102mm (4")
51mm (2")
3 Holes 32mm(1¼")
215mm (8½")
260mm (10¼")
Counter top
318mm (12½")
204mm(8") Supplies As Required
1¼" O.D. Waste 45mm (1¾") 65mm (2½")
Counter Top Cut Out 495mm x 400mm (19½" x 15¾")
435mm(17¾") 150mm 205mm (5⅞") (8")
Overflow Hole Note: Dimensions shown for location of supplies and waste are suggested. CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: May 2014
Connor 4210CFY
17" Oval Undermount Sink
Features
Compliance Certifications
• • • •
Meets or exceeds the following:
Vitreous china Front overflow hole Template and mounting hardware supplied Overall dimensions (W x D x H): (OD): 430mm(17") x 355mm(14") x 190mm(7½") (ID): 380mm(15") x 305mm(12") x 140mm(5½")
• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 Installed
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
77
CONNOR
17" OVAL UNDERMOUNT SINK 4210CFY
Undermount Sink
Product Specs: · Vitreous china · Front overflow hole · Template and mounting hardware supplied
Overall Dimensions (W x D x H): (OD): 430mm(17") x 355mm(14") x 190mm(7½") (ID): 380mm(15") x 305mm(12") x 140mm(5½")
Compliance Certifications: Meets or exceeds the following: Colours To Be Specified:
· IAPMO cUPC
Colour:
· ASME A112.19.2 / CSA B45.1-2008
Shipping: Cube
1.11
GW
16 lbs
Soft White Bone (055)* Biscuit (066)*
Notes:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
355mm(14")
13mm (½")
Detail of Mounting Clip Brass insert
Note: Dimensions shown for location of supplies and ″P″ trap are suggested.
Countertop
Sink
140mm (5½") 190mm (7½")
Clip Screw
430mm(17") 380mm(15") 64mm (2½") 355mm (14")
95mm (3¾") 70mm (2¾")
Counter Top
44mm (1¾")
45° 305mm (12")
430mm(17")
273mm (10¾") 327mm (12⅞")
Overflow Hole
204mm(8") Countertop Cut Out (Template Supplied)
Mounting Clips (4 Pieces)
1¼" O.D. Waste
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Supplies As Required
Revised: January 2014
Calvin 4220CFY
19¼" Oval Undermount Sink
Features
Compliance Certifications
• • • •
Meets or exceeds the following:
Vitreous china Front overflow hole Template and mounting hardware supplied Overall dimensions (W x D x H): (OD): 490mm(19¼") x 410mm(16⅛") x 195mm(7⅝") (ID): 430mm(17") x 350mm(13¾") x 145mm(5¾")
• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 Installed
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
79
CALVIN
19¼" OVAL UNDERMOUNT SINK 4220CFY
Undermount Sink
Product Specs: · Vitreous china · Front overflow hole · Template and mounting hardware supplied
Overall Dimensions (W x D x H): (OD): 490mm(19¼") x 410mm(16⅛") x 195mm(7⅝") (ID): 430mm(17") x 350mm(13¾") x 145mm(5¾")
Compliance Certifications: Meets or exceeds the following:
Colours To Be Specified:
· IAPMO cUPC
Colour:
· ASME A112.19.2 / CSA B45.1-2008
Shipping: Cube
1.53
GW
19 lbs
Soft White Bone (055)* Biscuit (066)*
Notes:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
410mm(16⅛")
15mm (⅝")
Detail of Mounting Clip Brass insert
Note: Dimensions shown for location of supplies and ″P″ trap are suggested.
Countertop
Sink
145mm (5¾") 195mm (7⅝")
Clip Screw
430mm(17")
490mm (19¼")
64mm (2½") 410mm (16⅛")
100mm (4") 70mm (2¾")
Counter Top
44mm (1¾")
45° 350mm (13¾")
490mm(19¼")
273mm (10¾") 327mm (12⅞")
Overflow Hole
204mm(8") Countertop Cut Out (Template Supplied)
Mounting Clips (4 Pieces)
32mm(1¼") O.D. Waste
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Supplies As Required
Revised: January 2014
Camden 4210CHY
16" Square Undermount Sink
Features
Compliance Certifications
• • • •
Meets or exceeds the following:
Vitreous china Front overflow hole Template and mounting hardware supplied Overall dimensions (W x D x H): (OD): 406mm(16") x 406mm(16") x 190mm(7½") (ID): 345mm(13⅝") x 345mm(13⅝") x 140mm(5½")
• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 Installed
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
81
CAMDEN
16" SQUARE UNDERMOUNT SINK 4210CHY
Undermount Sink
Product Specs: · Vitreous china · Front overflow hole · Template and mounting hardware supplied
Overall Dimensions (W x D x H): (OD): 406mm(16") x 406mm(16") x 190mm(7½") (ID): 345mm(13⅝") x 345mm(13⅝") x 140mm(5½")
Compliance Certifications: Meets or exceeds the following:
Colours To Be Specified:
· IAPMO cUPC
Colour:
· ASME A112.19.2 / CSA B45.1-2008
Soft White Bone (055)*
Shipping:
Biscuit (066)*
Cube
1.43
GW
24 lbs
Notes:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only. Detail of Mounting Clip Brass insert
Countertop
Sink
Note: Dimensions shown for location of supplies and ″P″ trap are suggested.
Clip Screw
406mm(16") 406mm(16") 30mm(1¼")
345mm(13⅝")
190mm (7½")
140mm (5½")
110mm (4⅜") 406mm (16")
65mm(2½") 345mm (13⅝")
Counter Top 406mm(16")
44mm(1¾") 327mm (12⅞")
Overflow Hole 12mm x 50mm (½" x 2")
100mm (4")
12mm (½")
Counter Top Cut Out (Template Supplied)
Mounting Clips (4 Pieces)
273mm (10¾")
204mm(8")
1¼" O.D. Waste
Supplies As Required
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Catena 4210CIY
20" Rectangular Undermount Sink
Features
Compliance Certifications
• • • •
Meets or exceeds the following:
Vitreous china Front overflow hole Template and mounting hardware supplied Overall dimensions (W x D x H): (OD): 510mm(20") x 395mm(15½") x 190mm(7½") (ID): 450mm(17¾") x 335mm(13⅛") x 140mm(5½")
• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 Installed
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
83
CATENA
20" RECTANGULAR UNDERMOUNT SINK 4210CIY
Undermount Sink
Product Specs: · Vitreous china · Front overflow hole · Template and mounting hardware supplied
Overall Dimensions (W x D x H): (OD): 510mm(20") x 395mm(15½") x 190mm(7½") (ID): 450mm(17¾") x 335mm(13⅛") x 140mm(5½")
Compliance Certifications: Meets or exceeds the following : · IAPMO cUPC
Colours To Be Specified:
· ASME A112.19.2 / CSA B45.1-2008
Colour:
Shipping: Cube
1.72
GW
27 lbs
Soft White Bone (055)* Biscuit (066)*
Notes:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only. Detail of Mounting Clip Brass insert
Countertop
Sink
Note: Dimensions shown for location of supplies and ″P″ trap are suggested.
395mm(15½")
Clip Screw
190mm (7½")
140mm (5½")
12mm (½")
510mm(20") 450mm(17¾")
30mm(1⅛") Counter Top
110mm (4¼") 395mm (15½")
65mm(2½") 335mm (13⅛")
510mm(20")
44mm(1¾") 327mm (12⅞")
Overflow Hole 12mm x 50mm (½" x 2")
273mm (10¾")
204mm(8")
130mm (5⅛")
Mounting Clips (4 Pieces)
1¼" O.D Waste
Supplies As Required
Countertop Cut Out (Template Supplied)
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Collette 4220CIY
21½" Rectangular Undermount Sink
Features
Compliance Certifications
• • • •
Meets or exceeds the following:
Vitreous china Front overflow hole Template and mounting hardware supplied Overall dimensions (W x D x H): (OD): 545mm(21½") x 355mm(14") x 190mm(7½") (ID): 485mm(19") x 295mm(11⅝") x 140mm(5½")
• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 Installed
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
85
COLLETTE
21½" RECTANGULAR UNDERMOUNT SINK 4220CIY
Undermount Sink
Product Specs: · Vitreous china · Front overflow hole · Template and mounting hardware supplied
Overall Dimensions (W x D x H): (OD): 545mm(21½") x 355mm(14") x 190mm(7½") (ID): 485mm(19") x 295mm(11⅝") x 140mm(5½")
Compliance Certifications: Meets or exceeds the following:
Colours To Be Specified:
· IAPMO cUPC
Colour:
· ASME A112.19.2 / CSA B45.1-2008
Shipping: Cube
1.64
GW
25 lbs
Soft White Bone (055)* Biscuit (066)*
Notes:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only. Detail of Mounting Clip Brass insert
Countertop
Sink
Note: Dimensions shown for location of supplies and ″P″ trap are suggested.
355mm(14")
Clip Screw
190mm (7½")
140mm (5½")
12mm (½")
545mm(21½") 485mm(19")
30mm(1⅛") Counter Top
110mm (4¼") 355mm (14")
65mm(2½") 295mm (11⅝")
545mm(21½")
44mm(1¾") 327mm (12⅞")
Overflow Hole 12mm x 50mm (½" x 2")
273mm (10¾")
204mm(8")
130mm (5⅛")
Mounting Clips (4 Pieces)
1¼" O.D Waste
Supplies As Required
Countertop Cut Out (Template Supplied)
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Caprice
4313DMX - Basin with Single Hole 4343DMX - Basin with 4" Center 4383DMX - Basin with 8" Center 4344DMX - Pedestal Leg
Pedestal Lavatory
Features
Compliance Certifications
• • • • • •
Meets or exceeds the following:
Vitreous china Rear overflow hole Single hole, 4" or 8" faucet center Supplied with mounting hardware Faucet not included 580mm(W) x 482mm(D) x 865mm(H) 22¾"(W) x 19"(D) x 34"(H)
• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
87
CAPRICE
PEDESTAL LAVATORY 4313DMX
Basin with Single Hole
4343DMX
Basin with 4" Center
4383DMX
Basin with 8" Center
4344DMX
Pedestal Leg
Product Specs: · Vitreous china · Rear overflow hole · Single hole, 4" or 8" faucet center · Supplied with mounting hardware · Faucet not included
Overall Dimensions:
Colours To Be Specified:
580mm(W) x 482mm(D) x 865mm(H)
Colour:
22¾"(W) x 19"(D) x 34"(H)
Soft White Bone (055)* Biscuit (066)*
Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC
Notes:
· ASME A112.19.2 / CSA B45.1-2008
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Shipping: Basin
*Bone and Biscuit available through Direct import (CIF) only.
2.36 cube 43 lbs (GW)
Leg
0.8 cube 24 lbs (GW) *67mm(2⅝")
32mm(1¼") Dia. 3 Holes
Finished Wall
Pedestal Anchor Screw Holes 2mm x 10mm (⅛" x ⅜") Dia.
Overflow Hole 64mm (2½")
44mm (1¾")
12mm x 20mm (½" x ⅞") Holes For Anchor
220mm (8⅝")
527mm(20¾") Single Hole, 102mm(4") or 204mm(8") Faucet Center
80mm (3⅛") 220mm (8⅝")
225mm (8⅞")
110mm (4⅜")
Supplies As Required
Back View 95mm (3¾")
865mm (34")
204mm (8")
1¼" O.D. Waste
482mm (19")
579mm (22¾")
535mm (21")
580mm(22¾") Note: Dimensions shown for location of supplies and waste are suggested. *Actual dimensions must be taken from fixture.
190mm(7½")
Finished Floor
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
190mm (7½")
Revised: January 2014
Carley
5343DMX - Basin with 4" Center 5383DMX - Basin with 8" Center 5344DMX - Pedestal Leg
Pedestal Lavatory
Features
Compliance Certifications
• • • • • •
Meets or exceeds the following:
Vitreous china Rear overflow hole 4" or 8" faucet center Supplied with mounting hardware Faucet not included 596mm(W) x 489mm(D) x 855mm(H) 23½"(W) x 19¼"(D) x 33⅝"(H)
• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
89
CARLEY
PEDESTAL LAVATORY 5343DMX
Basin with 4" Center
5383DMX
Basin with 8" Center
5344DMX
Pedestal Leg
Product Specs: · Vitreous china · Rear overflow hole · 4" or 8" faucet center · Supplied with mounting hardware · Faucet not included
Overall Dimensions: 596mm(W) x 489mm(D) x 855mm(H) Colours To Be Specified:
23½"(W) x 19¼"(D) x 33⅝"(H)
Colour:
Compliance Certifications:
Soft White Bone (055)* Biscuit (066)*
Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 Notes:
Shipping: Basin
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
2.64 cube 30 lbs (GW)
Leg
*Bone and Biscuit available through Direct import (CIF) only.
0.89 cube 18 lbs (GW)
465mm(18⅜") 410mm(16")
58mm (2¼")
Finished Wall 205mm (8")
44mm(1¾")
489mm (19¼")
Note: Dimensions shown for location of supplies and waste are suggested.
855mm (33⅝")
204mm (8")
Supplies As Required
35mm (1¼")
115mm (4½")
170mm (6¾")
215mm (8½")
102mm(4") or 204mm(8") Faucet Center
64mm(2½")
Back View
596mm(23½")
691mm (27¼")
569mm (22⅜") 32mm (1¼") O.D. Waste
190mm(7½")
525mm (20⅝")
Finished Floor
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Calena
5343AMX - Basin with 4" Center 5344AMX - Pedestal Leg
Pedestal Lavatory
Features
Compliance Certifications
• • • • • •
Meets or exceeds the following:
Vitreous china Rear overflow hole 4" faucet center Supplied with mounting hardware Faucet not included 530mm(W) x 435mm(D) x 800mm(H) 20⅞"(W) x 17⅛"(D) x 31½"(H)
• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008
Colours Available: Soft white / Bone* / Biscuit* *Bone and Biscuit available through Direct import (CIF) only.
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
91
CALENA
PEDESTAL LAVATORY 5343AMX
Basin with 4" Center
5344AMX
Pedestal Leg
Product Specs: · Vitreous china · Rear overflow hole · 4" faucet center · Supplied with mounting hardware · Faucet not included
Overall Dimensions: 530mm (W) x 435mm (D) x 800mm (H) Colours To Be Specified: Colours To BeSoft Specified: Colour: White
20⅞" (W) x 17⅛" (D) x 31½" (H)
Compliance Certifications:
Colour:
Soft White Bone (055)*
Biscuit (066)*
Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 Notes:
Shipping: Basin
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
2.15 cube 29 lbs (GW)
Leg
*Bone and Biscuit available through Direct import (CIF) only.
0.97 cube 17 lbs (GW) Mounting Holes Ø 13mm(½")
432mm(17") 102mm(4") Faucet Center
Ø 32mm(1¼") Finished
210mm (8¼")
530mm(20⅞")
Back View
55mm (2⅛")
165mm (6½")
Wall
800mm (31½")
204mm (8")
186mm (7⅜") Ø 64mm(2½") Ø 44mm(1¾")
435mm (17⅛")
Opening at rear 650mm (25½") 518mm (20⅜")
Supplies As Required
32mm (1¼") O.D. Waste
Note: Dimensions shown for location of supplies and waste are suggested.
(70mm) 2¾"
173mm(6¾")
438mm (18¼")
Finished Floor
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca Revised: January 2014
Cornell 4810BEX
Top Inlet Wall Mount Urinal
1.9Lpf / 0.5Gpf Wall Mount Urinal
4810BEY
Rear Inlet Wall Mount Urinal
Features
Compliance Certifications
• • • • • • • •
Meets or exceeds the following:
High efficiency urinal 1.9Lpf / 0.5Gpf Vitreous china Washout flush action Outlet spud with 1½" tubing tailpiece Flushing rim Mounting hardware supplied For concealed carrier installation (fits Zurn Z1221-130123 carriers) • Integral strainer • Flushometer not included • 321mm(W) x 324mm(D) x 457mm(H) 12⅝"(W) x 12¾"(D) x 18"(H)
• • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 LEED Compliant
Colours Available: Soft white
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
93
CORNELL
1.9Lpf / 0.5 Gpf WALL MOUNT URINAL 4810BEX 4810BEY
Top Inlet Wall Mount Urinal Rear Inlet Wall Mount Urinal
Product Specs: · High efficiency urinal · 1.9Lpf / 0.5Gpf · Vitreous china · Washout flush action · Outlet spud with 1½" tubing tailpiece · Flushing rim · Mounting hardware supplied · For concealed carrier installation (fits Zurn Z1221-130123 carriers) · Integral strainer
Colours To Be Specified:
· Flushometer not included
Colour:
Overall Dimensions:
Soft White
321mm(W) x 324mm(D) x 457mm(H) 12⅝"(W) x 12¾"(D) x 18"(H)
Notes:
Flush Valve is not included and must be ordered separately. Provide suitable reinforcement for all wall supports. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Compliance Certifications: Meets or exceeds the following:
Comply ADA Section 4.18 when installed per code.
· IAPMO cUPC
121mm (4¾")
· US EPA WaterSense Please note: In order to comply with WaterSense certification this urinal must be used with 1.9Lpf / 0.5Gpf WaterSense labeled flushometer.
Finished Wall 292mm (11½")
· ASME A112.19.2 / CSA B45.1-2008
Shipping: 2.35
GW
36 lbs
321mm(12⅝") 170mm(6⅝")
· LEED Compliant
Cube
¾" S.P.S or ¾" C.W.T Supply To Flush Valve
61mm (2½")
66mm (2½")
¾" Spud Hangers
19mm (¾") Top Spud or Back Spud
103mm(4") 115mm (4½")
305mm (12") 324mm (12¾")
457mm (18")
292mm (11½")
Finished Floor
1½" O.D. Waste 32mm (1¼")
432mm (17") Max. 610mm(24") Optional To Finished Floor
180mm (7")
1½" O.D. Tailpiece
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Carlo 4810BHX
Top Inlet Wall Mount Urinal
1.9Lpf / 0.5Gpf Wall Mount Urinal
4810BHY
Rear Inlet Wall Mount Urinal
Features
Compliance Certifications
• • • • • • • •
Meets or exceeds the following:
• • • •
High efficiency urinal 1.9Lpf / 0.5Gpf Vitreous china Washout flush action Outlet connection threaded 2" inside NPTF Flushing rim Mounting hardware supplied For concealed carrier installation (fits Zurn Z1221-130125 carriers) Extended sides for privacy Integral trap Flushometer not included 465mm(W) x 350mm(D) x 685mm(H) 18¼"(W) x 13¾"(D) x 27"(H)
• • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 LEED Compliant
Colours Available: Soft white
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
95
CARLO
1.9Lpf / 0.5Gpf WALL MOUNT URINAL 4810BHX 4810BHY
Top Inlet Wall Mount Urinal Rear Inlet Wall Mount Urinal
Product Specs: · High efficiency urinal · 1.9Lpf / 0.5Gpf · Vitreous china · Washout flush action · Outlet connection threaded 2" inside NPTF · Flushing rim · Mounting hardware supplied · For concealed carrier installation (fits Zurn Z1221-130125 carriers) · Extended sides for privacy · Integral trap
Colours To Be Specified:
· Flushometer not included
Colour:
Soft White
Overall Dimensions: 465mm(W) x 350mm(D) x 685mm(H) Notes:
18¼"(W) x 13¾"(D) x 27"(H)
Flush Valve is not included and must be ordered separately. Provide suitable reinforcement for all wall supports. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Compliance Certifications: Meets or exceeds the following:
Comply ADA Section 4.18 when installed per code.
· IAPMO cUPC · US EPA WaterSense Please note: In order to comply with WaterSense certification this urinal must be used with 1.9Lpf / 0.5Gpf WaterSense labeled flushometer.
· ASME A112.19.2 / CSA B45.1-2008
121mm (4¾")
292mm (11½")
· LEED Compliant
4.94
GW
60 lbs
685mm (27") 440mm (17⅜")
Finished Wall
445mm(17½")
19mm (¾") Spud
69mm (2¾")
2 Hangers
Shipping: Cube
¾" S.P.S or ¾" C.W.T Supply To Flush Valve
320mm(12½") 465mm(18¼")
8mm x 25mm (⅜" x ⅞") Slot 430mm (17")
350mm(13¾") 242mm(9½")
13mm(½")
110mm (4⅜") C/L of Outlet
Finished Floor
19mm (¾") Top Spud or Back Spud
102mm (4")
432mm (17") Max. 610mm(24") Optional
2" N.P.T Female Outlet Connection
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Carlton 4810BFX
Top Inlet Wall Mount Urinal
1.9Lpf / 0.5Gpf Wall Mount Urinal
Features
Compliance Certifications
• • • • • • • • •
Meets or exceeds the following:
• • • •
High efficiency urinal 1.9Lpf / 0.5Gpf Vitreous china Washout flush action ¾" Top inlet spud Outlet connection threaded 2" inside NPTF Flushing rim Mounting hardware supplied For concealed carrier installation (fits Zurn Z1221-130119 carriers) Extended sides for privacy Integral trap Flushometer not included 445mm(W) x 375mm(D) x 684mm(H) 17½"(W) x 14¾"(D) x 27"(H)
• • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 LEED Compliant
Colours Available: Soft white
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
97
CARLTON
1.9Lpf / 0.5Gpf WALL MOUNT URINAL 4810BFX
Top Inlet Wall Mount Urinal
Product Specs: · High efficiency urinal · 1.9Lpf / 0.5Gpf · Vitreous china · Washout flush action · ¾" Top inlet spud · Outlet connection threaded 2" inside NPTF · Flushing rim · Extended sides for privacy · Integral trap · Elongated 14¾" rim from finished wall · For concealed carrier installation (fits Colours To Be Specified:
Zurn Z1221-130119 carriers)
Colour:
· Flushometer not included
Soft White
Overall Dimensions: 445mm(W) x 375mm(D) x 684mm(H)
Notes:
17½"(W) x 14¾"(D) x 27"(H)
Flush Valve is not included and must be ordered separately. Provide suitable reinforcement for all wall supports. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Compliance Certifications: Meets or exceeds the following:
Comply ADA Section 4.18 when installed per code.
· IAPMO cUPC · US EPA WaterSense Please note: In order to comply with WaterSense certification this urinal must be used with 1.9Lpf / 0.5Gpf WaterSense labeled flushometer.
121mm (4¾")
· ASME A112.19.2 / CSA B45.1-2008
292mm 375mm(14¾") (11½") 19mm
· LEED Compliant
5.27
GW
65 lbs
2 Hangers
(¾") Spud
Shipping: Cube
¾" S.P.S. or ¾" C.W.T. Supply To Flush Valve
257mm (10⅛")
445mm(17½")
684mm 485mm (27") (9¾")
Finished Floor
165mm (6½")
60mm (2½")
19mm (¾") Top Inlet Spud
8mm x 25mm (⅜" x ⅞") Slot
418mm (16½")
375mm (14¾")
200mm (7⅞")
102mm (4")
Finished Wall
C/L of Outlet
13mm(½") 432mm(17") Max. 610mm(24") Optional 2" N.P.T Female Outlet Connection
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Canata 4810BMX
Top Inlet Wall Mount Urinal
1.9Lpf / 0.5Gpf Wall Mount Urinal
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
High efficiency urinal 1.9Lpf / 0.5Gpf Vitreous china Siphon jet flush action ¾" Top inlet spud Outlet connection threaded 2" inside NPTF Flushing rim Integral trap Wall hanger included Elongated 13⅞" rim from finished wall Flushometer not included 365mm(W) x 351mm(D) x 542mm(H) 14⅜"(W) x 13⅞"(D) x 21⅜"(H)
• • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 LEED Compliant
Colours Available: Soft white
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
99
CANATA
1.9Lpf / 0.5Gpf WALL MOUNT URINAL 4810BMX
Top Inlet Wall Mount Urinal
Product Specs: · High efficiency urinal · 1.9Lpf / 0.5Gpf · Vitreous china · Siphon jet flush action · ¾" Top inlet spud · Outlet connection threaded 2" inside NPTF · Flushing rim · Integral trap · Wall hanger included · Elongated 13⅞" rim from finished wall · Flushometer not included Colours To Be Specified:
Overall Dimensions:
Colour:
Soft White
365mm(W) x 351mm(D) x 542mm(H) 14⅜"(W) x 13⅞"(D) x 21⅜"(H)
Compliance Certifications:
Notes:
· IAPMO cUPC
Flush Valve is not included and must be ordered separately. Provide suitable reinforcement for all wall supports. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
· US EPA WaterSense
Comply ADA Section 4.18 when installed per code.
Meets or exceeds the following:
Please note: In order to comply with WaterSense certification this urinal must be used with 1.9Lpf / 0.5Gpf WaterSense labeled flushometer.
121mm (4¾")
· ASME A112.19.2 / CSA B45.1-2008 · LEED Compliant
292mm (11½")
Shipping: Cube
3.14
GW
33 lbs
¾" S.P.S. or ¾" C.W.T. Supply To Flush Valve
365mm(14⅜")
Finished Wall 57mm (2¼")
2 Hangers
19mm (¾") Top Inlet Spud
351mm (13⅞")
542mm (21⅜")
158mm (6¼")
Ø41mm (1⅝")
Finished Floor
102mm (4")
432mm (17") Max. 610mm(24") Optional 2" N.P.T Female Outlet Connection
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Colter 4762BEX
4.8Lpf / 1.28Gpf Elongated Flushometer Bowl
Top Inlet Flushometer Bowl
4762BEU
Rear Inlet Flushometer Bowl
TESTED
ÉPREUVE
800g (Top Inlet)
Features
Compliance Certifications
• • • • • • • • • • • •
Meets or exceeds the following:
High efficiency flushometer bowl 4.8Lpf / 1.28Gpf Will also function with 6Lpf / 1.6Gpf flushometer Elongated bowl Vitreous china 15⅛" Bowl height 10" (254mm) Rough-in 2" Fully glazed ball pass trapway Siphon jet flush action Water surface (270mm x 185mm) 10⅝" x 7¼" Flushometer not included 382mm(W) x 705mm(D) x 385mm(H) 15"(W) x 27¾"(D) x 15⅛"(H)
• • • • •
IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g (Top inlet) MaP tested 600g (Rear inlet) LEED Compliant
Colours Available: Soft white Shape of Toilet Seat: Commercial Elongated
(Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
101
COLTER
4.8Lpf / 1.28Gpf ELONGATED FLUSHOMETER BOWL 4762BEX 4762BEU
Top Inlet Flushometer Bowl Rear Inlet Flushometer Bowl
Product Specs: · High efficiency flushometer bowl · 4.8Lpf / 1.28Gpf · Will also function with 6Lpf / 1.6Gpf flushometer · Elongated bowl · Vitreous china · 15⅛" Bowl height · 10" (254mm) Rough-in · 2" Fully glazed ball pass trapway · Siphon jet flush action · Water surface (270mm x 185mm) 10⅝" x 7¼" · Toilet seat and flushometer not included
Colours To Be Specified: Colour:
Overall Dimensions:
Soft White
382mm(W) x 705mm(D) x 385mm(H) 15"(W) x 27¾"(D) x 15⅛"(H)
Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC
Notes:
This toilet is designed to rough-in at a minimum dimension of 254mm (10") from finished wall to C/L of outlet. Flush valve not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
· ASME A112.19.2 / CSA B45.1-2008 · MaP tested 800g (Top Inlet)
382mm(15")
· MaP tested 600g (Rear Inlet)
38mm (1½") Spud
38mm (1½") Top Spud or Back Spud
705mm(27¾")
Please note: MaP testing was completed with Sloan Flushometer Valve Model: Royal 111-1.2
Finished Wall
· LEED Compliant
385mm (15⅛")
Shipping: Cube 4.17 GW
56 lbs
243mm(9½")
550mm(21⅝") Finished Floor 254mm(10")
470mm(18½") Ø15mm(⅝")
C/L of Outlet
140mm (5½") 38mm (1½") Spud CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Clay 4762BOX
4.8Lpf / 1.28Gpf Elongated Flushometer Bowl
Top Inlet Flushometer Bowl
4762BOU
Rear Inlet Flushometer Bowl
TESTED
ÉPREUVE
800g (Top Inlet)
Features
Compliance Certifications
• • • • • • • • • • •
Meets or exceeds the following:
High efficiency flushometer bowl 4.8Lpf / 1.28Gpf Will also function with 6Lpf / 1.6Gpf flushometer Elongated bowl Vitreous china 16⅝" Bowl height 10" (254mm) Rough-in 2" Fully glazed ball pass trapway Water surface (250mm x 170mm) 9⅞" x 6⅝" Flushometer not included 382mm(W) x 705mm(D) x 424mm(H) 15"(W) x 27¾"(D) x 16⅝"(H)
• • • • • •
IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 800g (Top inlet) MaP tested 500g (Rear inlet) LEED Compliant
Colours Available: Soft white Shape of Toilet Seat: Commercial Elongated (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
103
CLAY
4.8Lpf / 1.28Gpf ELONGATED FLUSHOMETER BOWL
4762BOX Top Inlet Flushometer Bowl 4762BOU Rear Inlet Flushometer Bowl Product Specs: · High efficiency flush valve bowl · 4.8Lpf / 1.28Gpf · Will also function with 6Lpf / 1.6Gpf flushometer · Elongated bowl · Vitreous china · 16⅝" Bowl height · 10" (254mm) Rough-in · 2" Fully glazed ball pass trapway · Siphon jet flush action · Water surface (250mm x 170mm) 9⅞" x 6⅝" · Toilet seat and flushometer not included
Colours To Be Specified:
Overall Dimensions:
Colour:
Soft White
382mm(W) x 705mm(D) x 424mm(H) 15"(W) x 27¾"(D) x 16⅝"(H)
Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1 · MaP tested 800g (Top Inlet) · MaP tested 500g (Rear Inlet)
Notes: This toilet is designed to rough-in at a minimum dimension of 254mm (10") from finished wall to C/L of outlet. Flush valve not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.
382mm(15")
38mm (1½") Spud
705mm(27¾")
Please note: MaP testing was completed with Sloan Flushometer Valve Model: Royal 111-1.2
· LEED Compliant
Finished Wall
424mm (16⅝")
Shipping:
38mm (1½") Top Spud or Back Spud
Cube 4.55 GW
50 lbs 243mm(9½")
Finished Floor
545mm(21½")
470mm(18½")
254mm(10")
15mm(⅝")
C/L of Outlet 140mm (5½")
38mm (1½") Spud
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Clark 4762CEX
4.8Lpf / 1.28Gpf Elongated Flushometer Bowl
Top Inlet Wall Hung Flushometer Bowl
4762CEU
Rear Inlet Wall Hung Flushometer Bowl
TESTED
ÉPREUVE
800g (Top Inlet)
Features
Compliance Certifications
• • • • • • • • • •
Meets or exceeds the following:
High efficiency flushometer bowl 4.8Lpf / 1.28Gpf Will also function with 6Lpf / 1.6Gpf flushometer Elongated bowl Vitreous china 2" Fully glazed ball pass trapway Siphon jet flush action Water surface (260mm x 220mm) 10¼" x 8⅝" Flushometer not included 390mm(W) x 650mm(D) x 335mm(H) 15⅜"(W) x 25½"(D) x 13⅛"(H)
• • • • • •
IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 800g (Top inlet) MaP tested 500g (Rear inlet) LEED Compliant
Colours Available: Soft white Shape of Toilet Seat: Commercial Elongated
(Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
105
CLARK
4.8Lpf / 1.28Gpf ELONGATED WALL HUNG FLUSHOMETER BOWL 4762CEX Top Inlet Wall Hung Flushometer Bowl 4762CEU Rear Inlet Wall Hung Flushometer Bowl Product Specs: · High efficiency flushometer bowl · 4.8Lpf / 1.28Gpf · Will also function with 6Lpf / 1.6Gpf flushometer · Elongated bowl · Vitreous china · 2" Fully glazed ball pass trapway · Siphon jet flush action · Water surface (260mm x 220mm) 10¼" x 8⅝" · Toilet seat and flushometer not included
Colours To Be Specified:
Overall Dimensions:
Colour:
Soft White
390mm(W) x 650mm(D) x 335mm(H) 15⅜"(W) x 25½"(D) x 13⅛"(H) Notes:
Compliance Certifications:
• Toilet models designed to meet ADA Accessibility Standard when top of seat at 432mm to 482mm (17" to 19") from finished floor. Flush valve not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. 38mm (1½")
Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1
390mm(15⅜")
· MaP tested 800g (Top Inlet)
38mm (1½") Spud
650mm (25½")
· MaP tested 500g (Rear Inlet) Please note: MaP testing was completed with Sloan Flushometer Valve Model: Royal 111-1.2
381mm (15") ● 432mm
· LEED Compliant
Top Spud or Back Spud
254mm (10")
335mm (13⅛")
Finished Wall
(17") Max. ADA Height
Shipping: Cube 3.79 GW
50 lbs Finished Floor Ø25mm (1")
230mm (9") 468mm(18½")
190mm (7½")
15mm(⅝")
Ø38mm(1½") Spud (4762CEU only)
Ø57mm (2¼")
140mm (5½")
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
38mm (1½") Spud
(4762CEX only)
Revised: January 2014
Cleo
5722BOY - Bowl 5721BOY - Unlined Tank
3.8Lpf / 1Gpf 2pc 17" High Elongated Pressure Assist
Features
Compliance Certifications
• High efficiency pressure assist toilet • 3.8Lpf / 1Gpf • Powerful and Quiet pressure assisted Sloan FLUSHMATE® Flush assures clean and complete removal of all waste • Elongated bowl • Vitreous china • 17" Bowl height • Chrome tank lever • 12" (305mm) Rough-in • 2" Fully glazed ball pass trapway • Siphon jet flush action • Water Surface (203mm x 165mm) 8" x 6½" • 447mm(W) x 716mm(D) x 799mm(H) 17⅝"(W) x 28⅛"(D) x 31½"(H)
Meets or exceeds the following: • • • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 1000g MaP Premium certified LEED Compliant
Colours Available: Soft white Shape of Toilet Seat: Elongated (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
107
CLEO
3.8Lpf / 1Gpf 2PC 17" HIGH ELONGATED PRESSURE ASSIST 5722BOY
Bowl
5721BOY
Unlined Pressure Assist Tank
Product Specs: · High efficiency pressure assist toilet · 3.8Lpf / 1Gpf · Powerful and Quiet pressure assisted Sloan FLUSHMATE® Flush assures clean and complete removal of all waste · Elongated bowl · Vitreous china · 17" Bowl height · Chrome tank lever
Colours To Be Specified:
· 12" (305mm) Rough-in
Colour:
· 2" Fully glazed ball pass trapway
Soft White
· Siphon jet flush action · Water surface (203mm x 165mm) 8" x 6½" · Toilet seat not included
Notes:
Overall Dimensions: 447mm(W) x 716mm(D) x 799mm(H) 17⅝"(W) x 28⅛"(D) x 31½"(H)
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.
Compliance Certifications: Meets or exceeds the following:
716mm(28⅛")
· IAPMO cUPC
447mm(17⅝")
· US EPA WaterSense · ASME A112.19.2 / CSA B45.1 2008
C/L of Seat post holes 140mm(5½")
· ADA Guidelines & ANSI A117.1 357mm (14")
· Map tested 1000g · MaP Premium certified
Finished Wall
· LEED Compliant
470mm(18½")
· Map Premium certified
Shipping: Tank
356mm(14")
4.59 cube
693mm(27¼") 431mm (17")
1.43 cube 33 lbs (GW)
Bowl
10mm(⅜")
202mm(8")
799mm (31½")
52 lbs (GW) 262mm(10⅜")
547mm(21½") Finished Floor
305mm (12")
C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Chane
5722BMY - Bowl 5721BOY - Unlined Tank
3.8Lpf / 1.0Gpf 2pc 17" High Elongated Rear Outlet Pressure Assist
Features
Compliance Certifications
• High efficiency pressure assist toilet • 3.8Lpf / 1.0Gpf • Powerful and Quiet pressure assisted Sloan FLUSHMATE® Flush assures clean and complete removal of all waste • Elongated siphon jet action bowl • Vitreous china • 17" Bowl height • Chrome tank lever • Back outlet flange • 2" Fully glazed ball pass trapway • Water surface (295mm x 198mm) 11⅝" x 7⅞" • 447mm(W) x 755mm(D) x 800mm(H) 17½"(W) x 29¾"(D) x 31½"(H)
Meets or exceeds the following: • • • • • • •
IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 1000g MaP Premium certified LEED Compliant
Colours Available: Soft white Shape of Toilet Seat: Elongated (Not included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
109
CHANE
3.8Lpf / 1.0Gpf 2PC 17" HIGH ELONGATED REAR OUTLET PRESSURE ASSIST 5722BMY
Bowl
5721BOY
Unlined Pressure Assist Tank
Product Specs: · High efficiency pressure assist toilet · 3.8Lpf / 1.0Gpf · Powerful and Quiet pressure assisted Sloan FLUSHMATE® Flush assures clean and complete removal of all waste · Elongated siphon jet action bowl · Vitreous china · 17" Bowl height · Chrome tank lever · Back outlet flange
Colours To Be Specified:
· 2" Fully glazed ball pass trapway
Colour:
· Water surface (295mm x 198mm) 11⅝" x 7⅞"
Soft White
· Toilet seat not included
Overall Dimensions:
Notes:
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
447mm(W) x 755mm(D) x 800mm(H) 17½"(W) x 29¾"(D) x 31½"(H)
Compliance Certifications:
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.
Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008
Finished Wall
· ADA Guidelines & ANSI A117.1 · MaP tested 1000g
755mm(29¾")
447mm(17½")
· MaP Premium certified
209mm (9⅞")
· LEED Compliant C/L of Seat Post Holes 140mm(5½")
Shipping: Tank
1.43 cube / 33 lbs (GW)
Bowl
5.13 cube / 60 lbs (GW)
357mm (14⅛")
470mm(18½")
375mm(14⅞")
Back View
755mm(29¾")
375mm(14⅞")
Ø82mm (3¼")
800mm (31½")
Ø65mm (2⅝")
430mm (17")
22*12mm (⅞"*½")
108mm (4¼") 150mm (5⅞") 232mm(9¼")
232mm(9¼")
638mm(25⅛") Finished Floor
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Caledon
4760BKT - Lined Tank / Bowl 4760BKT-L - Lined Locking Tank / Bowl
6Lpf / 1.6Gpf 2pc Kindergarten
Optional
Features
Compliance Certifications
• • • • • •
Meets or exceeds the following:
• • • • • •
Low consumption toilet 6Lpf / 1.6Gpf Vitreous china 11" Bowl height Soft white tank lever Allen key locking mechanism (applicable only on locking tank option) 10" (254mm) Rough-in 2" Fully glazed ball pass trapway Siphon jet flush action Plastic toilet seat included Water surface (235mm x 210mm) 9¼" x 8¼" 432mm(W) x 617mm(D) x 671mm(H) 17"(W) x 24¼"(D) x 26⅜"(H)
• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 • LEED Compliant
Colours Available: Soft white Shape of Toilet Seat: Kindergarten (Included)
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
111
CALEDON
6Lpf / 1.6Gpf 2PC KINDERGARTEN
4760BKT
Lined Tank
4760BKT-L
Lined Locking Tank (optional)
Product Specs: · Low consumption toilet
Optional
· 6Lpf / 1.6Gpf · Vitreous china · 11" Bowl height · Soft white tank lever · Allen key locking mechanism (applicable only on locking tank option) · 10" (254mm) Rough-in · 2" Fully glazed ball pass trapway · Siphon jet flush action · Water surface (235mm x 210mm) 9¼" x 8¼"
Colours To Be Specified:
· Plastic toilet seat included
Colour:
Soft White
Overall Dimensions: 432mm(W) x 617mm(D) x 671mm(H) 17"(W) x 24¼"(D) x 26⅜"(H)
Notes:
Compliance Certifications: Meets or exceeds the following:
This toilet is designed to rough-in at a minimum dimension of 254mm (10") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
· IAPMO cUPC · ASME A112.19.2 / CSA B45.1 2008 · LEED Compliant
Shipping: Cube
4.3
GW
72 lbs
10mm(⅜")
617mm(24¼") 203mm(8")
432mm(17")
C/L of Seat post holes 140mm (5½")
380mm (15")
Finished wall
380mm(15")
343mm(13½") 671mm (26⅜")
280mm (11")
575mm(22⅝")
440mm(17⅜")
217mm(8½")
Finished floor
254mm (10") C/L of Outlet
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Chelsea 4610BHW - Single Hole 4640BHW - 4" Center 4680BHW - 8" Center
Wall Mount Sink
Features
Compliance Certifications
• • • • •
Meets or exceeds the following:
Vitreous china Front overflow hole Single hole, 4" or 8" faucet center Mounting hardware supplied Optional metal support leg (Supplied by others) • Faucet not included • 485mm(W) x 440mm(D) x 215mm(H) 19⅛"(W) x 17⅜"(D) x 8½"(H)
• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 • ADA Guidelines & ANSI A117.1
Colours Available: Soft white
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
113
CHELSEA
WALL MOUNT SINK 4610BHW
Single Hole
4640BHW
4" Center
4680BHW
8" Center
Product Specs: · Vitreous china · Front overflow hole · Single hole, 4" or 8" faucet center · Mounting hardware supplied · Optional metal support legs (Supplied by others) · Faucet not included
Overall Dimensions: 485mm(W) x 440mm(D) x 215mm(H) 19⅛"(W) x 17⅜"(D) x 8½"(H)
Colours To Be Specified: Colour:
Compliance Certifications:
Soft White
Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008
Notes:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
· ADA Guidelines & ANSI A117.1
Shipping: Cube
1.88
GW
26.5 lbs
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.
Dimensions shown for location of Supplies and “P” Trap are suggested. Provide reinforcement for wall supports. *Actual dimensions must be taken from fixture.
Anchor Screw Hole x 2
485mm(19⅛")
Single hole, 102mm(4") or 204mm(8")
70mm 60mm (2¾") (2⅜")
Ø 32mm(1¼")
Ø 44mm(1¾")
216mm (8½")
64mm(2½") Ø
84mm (3¼")
Overflow Hole
18mm(¾")
133mm (5¼")
215mm (8½") 235mm (9¼") 279mm (11")
105mm (4⅛") 107mm (6¾") 440mm (17⅜")
Access Holes For Metal Stands (x6)
787mm (31") Min 869mm (34") Max.
6x Bracket Anchor Hole (8mm Dia.)
204mm(8")
Mounting Bracket
Supplies As Required
Drain Plug Outlet 1¼" O.D. Waste
756mm (29¾") Min 781mm (30¾") Max.
Finished Floor
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Cassidy 4313DGX - Single Hole 4343DGX - 4" Center 4383DGX - 8" Center
Semi-Recessed Sink
Features
Compliance Certifications
• • • •
Meets or exceeds the following:
• • • •
Vitreous china Rear overflow hole Single hole, 4" or 8" faucet center Mounting screws and cut-out template supplied 8" Front overhang Wall secured lavatory for countertop or vanity installation Faucet not included 614mm(W) x 512mm(D) x 180mm(H) 24⅛"(W) x 20⅛"(D) x 7"(H)
• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 • ADA Guidelines & ANSI A117.1
Colours Available: Soft white
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
115
CASSIDY
SEMI-RECESSED SINK 4313DGX
Single Hole
4343DGX
4" Center
4383DGX
8" Center
Product Specs: · Vitreous china · Rear overflow hole · Single hole, 4" or 8" faucet center · Mounting screws and cut-out template supplied · 8" Front overhang · Wall secured lavatory for countertop or vanity installation · Faucet not included
Overall Dimensions:
Colours To Be Specified: Colour:
614mm(W) x 512mm(D) x 180mm(H)
Soft White
24⅛"(W) x 20⅛"(D) x 7"(H)
Compliance Certifications: Notes:
Meets or exceeds the following:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
· IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.
Shipping: Cube
2.32
GW
44 lbs 614mm(24⅛") Single hole, 102mm(4") or 204mm(8")
205mm (8")
512mm(20⅛")
Finshed Wall
62mm(2½")
32mm(1¼") x 3 Holes
64mm(2½")
44mm(1¾")
220mm (8⅝")
170mm (6⅝")
864mm(34") Max. ADA Height
180mm (7")
685mm(27") Min. ADA Height
Finshed Floor CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Carmin 4610BHZ - Single Hole 4640BHZ - 4" Center 4680BHZ - 8" Center
Wall Mount Sink with Ledge
Features
Compliance Certifications
• • • • •
Meets or exceeds the following:
Vitreous china Rear overflow hole Single hole, 4" or 8" faucet center Mounting bracket and hardware supplied For concealed arm carrier installation (fits Zurn Z1231-EZ, Z1231-EZR, Z1253, Z1254 arm carriers) • Back splash ledge • Faucet not included • 510mm(W) x 467mm(D) x 262mm(H) 20"(W) x 18⅜"(D) x 10⅜"(H)
• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 • ADA Guidelines & ANSI A117.1
Colours Available: Soft white
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
117
CARMIN
WALL MOUNT SINK WITH LEDGE 4610BHZ 4640BHZ
Single Hole 4" Center
4680BHZ
8" Center
Product Specs: · Vitreous china · Rear overflow hole · Single hole, 4" or 8" faucet center · Mounting bracket and hardware supplied · For concealed arm carrier installation (fits Zurn Z1231-EZ, Z1231-EZR, Z1253, Z1254 arm carriers) · Back splash ledge · Faucet not included
Overall Dimensions: 510mm(W) x 467mm(D) x 262mm(H) Colours To Be Specified:
20"(W) x 18⅜"(D) x 10⅜"(H)
Colour:
Compliance Certifications:
Soft White
Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1
Shipping: Cube
2.87
GW
38 lbs
Notes:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.
Finshed Wall
510mm(20")
467mm(18⅜")
Single hole, 102mm(4") or 204mm(8")
205mm (8")
102mm (4")
212mm (8⅞") 160mm(6¼")
160mm(6¼")
64mm(2½")
262mm (10⅜")
193mm (7⅝")
32mm(1¼") x 3 Holes 44mm(1¾")
864mm(34") Max. ADA Height
Ø27mm(1") x 6 Floor Stand Holes
685mm (27") Min. ADA Height
416mm(16⅜") Finshed Floor Back View
110mm (4⅜")
x2 Carrier Arm Holes Ø60mm(2⅜") 410mm(16⅛") CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
Revised: January 2014
Clayton 4610CHZ - Single Hole 4640CHZ - 4" Center 4680CHZ - 8" Center 4644CHZ - Shroud
Wall Mount Sink with Shroud
Features
Compliance Certifications
• • • • •
Meets or exceeds the following:
Vitreous china Rear overflow hole Single hole, 4" or 8" faucet center Mounting bracket and hardware supplied For concealed arm carrier installation (fits Zurn Z1231-EZ, Z1231-EZR, Z1253, Z1254 arm carriers) • Faucet not included • 520mm(W) x 585mm(D) x 543mm(H) 20½"(W) x 23"(D) x 21⅜"(H)
• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 • ADA Guidelines & ANSI A117.1
Colours Available: Soft white
www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Revised: May 2014
119
CLAYTON
WALL MOUNT SINK WITH SHROUD 4610CHZ 4640CHZ
Single Hole 4" Center
4680CHZ
8" Center
4644CHZ
Shroud
Product Specs: · Vitreous china · Rear overflow hole · Single hole, 4" or 8" faucet center · Mounting bracket and hardware supplied · For concealed arm carrier installation (fits Zurn Z1231-EZ, Z1231-EZR, Z1253, Z1254 arm carriers) · Faucet not included
Overall Dimensions: Colours To Be Specified:
520mm(W) x 585mm(D) x 543mm(H)
Colour:
20½"(W) x 23"(D) x 21⅜"(H)
Soft White
Compliance Certifications: Meets or exceeds the following:
Important:
This sink is designed to comply with ADA ASME A117.1 and OBC barrier-free standard when installed in accordance with this measurement. Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
· IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1
Shipping (Sink): Cube
2.93
GW
49 lbs
8mm(⅜")
Shipping (Shroud): Cube
1.48
GW
21 lbs
265mm(10½") 410mm(16⅛")
155mm (6⅛")
390mm x2 Carrier Arm Holes Ø59mm(2⅜") (15⅜")
Shroud
370mm (14½")
10mm(⅜") 432mm(17")
520mm(20½")
585mm(23")
Single hole, 102mm(4") or 204mm(8")
205mm(8")
90mm(3½") 100mm(4")
208mm (8⅛")
80mm(3⅛")
32mm(1¼") 130mm(5⅛") 64mm(2½") 44mm(1¾")
Back View
760mm 735mm (29") Min.
840mm (33") Max.
140mm(5½")
Ø25mm(1") x 6 Floor Stand Holes
222mm(8¾") 315mm (12⅜") 695mm 685mm (27") Min.
280mm(11")
543mm (21⅜") Finished Wall
Finished Floor
420mm(16½") CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca
295mm(3⅛") 230mm (9") Min.
Revised: January 2014
息 Copyright Contrac速 2014. All rights reserved. This catalogue contains information on a variety of our vitreous china products distributed by Contrac速. While the information contained in this catalogue was believed to be accurate at the time of printing, it is not guaranteed to be so, and it is subject to change. Please contact a Contrac速 customer service representative should you require in-depth information on a product or its application.
1.888.256.7551
www.contrac.ca
5970 Chedworth Way, Unit A, Mississauga, Ontario, Canada L5R 3V5 www.contrac.ca