Issuu

Full Line Catalogue

Product Index 2pc Toilets

Toilet Seats

Carlin .................................................................. 3

Round Front ....................................................... 63

Cody .................................................................. 5

Elongated Front ................................................ 65

6Lpf / 1.6Gpf

Crista .................................................................. 7 Cane-Locking Tank .......................................... 9

4.8Lpf / 1.28Gpf Carlin .................................................................. 11 Caven ................................................................ 13 Cody .................................................................. 15 Crista .................................................................. 17 Cane-Locking Tank .......................................... 19

6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf Carson................................................................ 21 Camri.................................................................. 23 Cullen ................................................................. 25

Plastic

Bidet Cale.................................................................... 67

Drop-In Sinks Catalina ............................................................. 69 Cailyn ................................................................. 71 Curtis................................................................... 73

Undermount Sinks Connor ............................................................... 75 Calvin ................................................................. 77 Camden ............................................................ 79 Catena............................................................... 81

3.8Lpf / 1Gpf

Collette .............................................................. 83

Cadell................................................................. 27

Pedestal Lavatories

Cato ................................................................... 29 Clancy................................................................ 31 Case ................................................................... 33

Total Toilets Carlin 6Lpf / 1.6 Gpf ......................................... 35 Carlin 4.8Lpf / 1.28Gpf ..................................... 37 Caven 4.8Lpf / 1.28Gpf.................................... 39 Cody 4.8Lpf / 1.28Gpf...................................... 41 Crista 4.8Lpf / 1.28Gpf...................................... 43 Carson 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf ............ 45

1pc Toilets

6Lpf / 1.6Gpf

Caprice.............................................................. 85 Carley................................................................. 87

Light Commercial Products Cornell................................................................ 89 Carlo................................................................... 91 Carlton ............................................................... 93 Canata .............................................................. 95 Colter.................................................................. 97 Clay .................................................................... 99 Clark ................................................................... 101 Cleo.................................................................... 103 Chane ................................................................ 105

Chloe.................................................................. 47

Caledon............................................................. 107

Caden................................................................ 49

Chelsea.............................................................. 109

1pc Toilets

4.8Lpf / 1.28Gpf Chloe.................................................................. 51

Cassidy............................................................... 111 Carmin ............................................................... 113 Clayton .............................................................. 115

Caden................................................................ 53 Caldwell............................................................. 55 Cartwright.......................................................... 57

4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf Claire .................................................................. 59 Canby ................................................................ 61

www.contrac.ca

Issued: October 2013

Carlin

4722BFT - Bowl 4721BFT - Lined Tank 4721BFTU - Unlined Tank 4721BFTU-RH - Unlined Tank

6Lpf / 1.6Gpf 2pc Round Front Regular Height

(Right Hand Lever - Soft White Only)

10" Rough-In (Soft White Only) 4700BFT - Lined Tank 4700BFTU - Unlined Tank 14" Rough-In (Soft White Only)

4724BFT - Lined Tank 4724BFTU - Unlined Tank

TESTED

ÉPREUVE

800g

Features

Compliance Certifications

• • • • • • •

Meets or exceeds the following:

• • • •

Low consumption toilet 6Lpf / 1.6Gpf Round front bowl Vitreous china 15½" Bowl height Chrome tank lever 10" (254mm),12" (305mm) and 14" (356mm) rough-in tanks available 2" Fully glazed ball pass trapway Siphon jet flush action Water surface (210mm x 156mm) 8¼" x 6¼" 440mm(W) x 670mm(D) x 765mm(H) 17¼"(W) x 26⅜"(D) x 30⅛"(H)

• • • •

IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant

Colours Available: Soft white / Bone / Biscuit Shape of Toilet Seat: Round front (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CARLIN

6Lpf / 1.6Gpf 2PC ROUND FRONT REGULAR HEIGHT 4722BFT

Bowl

4721BFT

Lined Tank

4721BFTU

Unlined Tank

4721BFTU-RH

Unlined Tank

(Right Hand Lever - Soft White Only) 10" Rough-In (Soft White Only)

*4700BFT

Lined Tank

*4700BFTU

Unlined Tank

14" Rough-In (Soft White Only)

*4724BFT

Lined Tank

*4724BFTU

Unlined Tank

Product Specs: Colours To Be Specified:

· Low consumption toilet

Colour:

· 6Lpf / 1.6Gpf

Soft White Bone (055)

· Round front bowl

Biscuit (066)

· Vitreous china · 15½" Bowl height · Chrome tank lever

Notes:

· 10" (254mm), 12" (305mm) and 14" (356mm) rough-in tanks available · 2" Fully glazed ball pass trapway · Siphon jet flush action · Water surface (210mm x 156mm) 8¼" x 6¼ "

The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

*For further details and specifications please refer to the price book or visit www.contrac.ca

· Toilet seat not included

Overall Dimensions: 440mm(W) x 670mm(D) x 765mm(H) 17¼"(W) x 26⅜"(D) x 30⅛"(H)

10mm(⅜")

670mm(26⅝")

440mm(17¼")

204mm(8")

Compliance Certifications:

C/L of seat post holes 140mm(5½")

Meets or exceeds the following: · IAPMO cUPC

350mm (13¾")

· ASME A112.19.2 / CSA B45.1-2008

Finished Wall

420mm(16½")

· MaP tested 800g · LEED Compliant 356mm(14")

Shipping: Tank

1.93 cube 34 lbs (GW)

Bowl

3.38 cube 46 lbs (GW)

630mm(25")

765mm (30⅛") 393mm (15½")

235mm(9¼")

500mm(19⅝") 305mm(12")

Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Cody

4722BET - Bowl 4721BFT - Lined Tank 4721BFTU - Unlined Tank 4721BFTU-RH - Unlined Tank

6Lpf / 1.6Gpf 2pc Elongated Regular Height

(Right Hand Lever)

10" Rough-In 4700BFT - Lined Tank 4700BFTU - Unlined Tank 14" Rough-In

4724BFT - Lined Tank 4724BFTU - Unlined Tank

Features

Compliance Certifications

• • • • • • •

Meets or exceeds the following:

• • • •

Low consumption toilet 6Lpf / 1.6Gpf Elongated bowl Vitreous china 15½" Bowl height Chrome tank lever 10" (254mm),12" (305mm) and 14" (356mm) rough-in tanks available 2" Fully glazed ball pass trapway Siphon jet flush action Water surface (218mm x 165mm) 8½" x 6½" 440mm(W) x 725mm(D) x 760mm(H) 17¼"(W) x 28½"(D) x 30"(H)

• • • •

IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Elongated (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CODY

6Lpf / 1.6Gpf 2PC ELONGATED REGULAR HEIGHT 4722BET

Bowl

4721BFT

Lined Tank

4721BFTU

Unlined Tank

4721BFTU-RH

Unlined Tank (Right Hand Lever)

10" Rough-In

*4700BFT

Lined Tank

*4700BFTU

Unlined Tank

14" Rough-In

*4724BFT

Lined Tank

*4724BFTU

Unlined Tank

Product Specs: · Low consumption toilet · 6Lpf / 1.6Gpf

Colours To Be Specified:

· Elongated bowl

Colour:

Soft White

· Vitreous china · 15½" Bowl height · Chrome tank lever

Notes:

· 10" (254mm), 12" (305mm) and 14" (356mm) rough-in tanks available · 2" Fully glazed ball pass trapway · Siphon jet flush action · Water surface (218mm x 165mm) 8½" x 6½"

*For further details and specifications please refer to the price book or visit www.contrac.ca

· Toilet seat not included

Overall Dimensions:

10mm(⅜")

440mm(W) x 725mm(D) x 760mm(H) 17¼"(W) x 28½"(D) x 30"(H)

725mm(28½") 440mm(17¼")

204mm(8")

Compliance Certifications:

C/L of Seat Post Holes 140mm(5½")

Meets or exceeds the following: · IAPMO cUPC

350mm (13¾")

· ASME A112.19.2 / CSA B45.1-2008

Finished Wall 470mm(18½")

· MaP tested 800g · LEED Compliant

Shipping:

356mm(14")

Tank

1.93 cube 34 lbs (GW)

Bowl

3.58 cube 48 lbs (GW)

690mm(27⅛")

760mm (30") 393mm (15½")

245mm(9⅝")

520mm(20½") 305mm(12") Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: June 2013

Crista

4722BIT - Bowl 4721BFT - Lined Tank 4721BFTU - Unlined Tank 4721BFTU-RH - Unlined Tank

6Lpf / 1.6Gpf 2pc 17" High Elongated

(Right Hand Lever)

10" Rough-In 4700BFT - Lined Tank 4700BFTU - Unlined Tank 14" Rough-In

4724BFT - Lined Tank 4724BFTU - Unlined Tank

Features

Compliance Certifications

• • • • • • •

Meets or exceeds the following:

• • • •

Low consumption toilet 6Lpf / 1.6Gpf Elongated bowl Vitreous china 17" Bowl height Chrome tank lever 10" (254mm),12" (305mm) and 14" (356mm) rough-in tanks available 2" Fully glazed ball pass trapway Siphon jet flush action Water surface (240mm x 160mm) 9½" x 6¼" 440mm(W) x 740mm(D) x 790mm(H) 17¼"(W) x 29⅛"(D) x 31"(H)

• • • • •

IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 800g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Elongated (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CRISTA

6Lpf / 1.6Gpf 2PC 17" HIGH ELONGATED 4722BIT

Bowl

4721BFT

Lined tank

4721BFTU

Unlined tank

4721BFTU-RH

Unlined Tank (Right Hand Lever)

10" Rough-In

*4700BFT

Lined Tank

*4700BFTU

Unlined Tank

14" Rough-In

*4724BFT

Lined Tank

*4724BFTU

Unlined Tank

Product Specs: · Low consumption toilet · 6Lpf / 1.6Gpf Colours To Be Specified:

· Elongated bowl

Colour:

· Vitreous china

Soft White

· 17" Bowl height · Chrome tank lever · 10" (254mm), 12" (305mm) and 14" (356mm) rough-in tank available · 2" Fully glazed ball pass trapway · Siphon jet flush action · Water surface (240mm x 160mm) 9½" x 6¼" · Toilet seat not included

Overall Dimensions:

Notes: The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.

*For further details and specifications please refer to the price book or visit www.contrac.ca 10mm(⅜")

440mm(W) x 740mm(D) x 790mm(H) 17¼"(W) x 29⅛"(D) x 31"(H)

740mm(29⅛")

440mm(17¼")

204mm(8")

Compliance Certifications: C/L of Seat Post Holes 140mm(5½")

Meets or exceeds the following: · IAPMO cUPC 350mm (13¾")

· ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1

Finished Wall 470mm(18½")

· MaP tested 800g · LEED Compliant

Shipping:

356mm(14")

Tank

1.93 cube 34 lbs (GW)

Bowl

3.96 cube 50 lbs (GW)

695mm(27⅜")

790mm (31") 432mm (17")

245mm(9⅝")

520mm(20½") 305mm(12") Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: June 2013

Cane-Locking Tank 4721BFT-L - Lined Tank 4721BFTU-L - Unlined Tank

6Lpf / 1.6Gpf

Features

Compliance Certifications

• • • • •

Meets or exceeds the following:

• • • •

Low consumption tank 6.0Lpf / 1.6Gpf Allen key locking mechanism Chrome tank lever Fits Carlin (4722BFT), Cody (4722BET) and Crista (4722BIT) bowls Vitreous china 2" Flapper Applicable for 12" Rough-in bowls only 440mm(W) x 204mm(D) x 350mm(H) 17¼"(W) x 8"(D) x 13¾"(H)

• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CANE - LOCKING TANK 6Lpf / 1.6Gpf

4721BFT-L

Lined Tank

4721BFTU-L

Unlined Tank

Product Specs: · Low consumption tank · 6Lpf / 1.6Gpf · Allen key locking mechanism · Vitreous china · Chrome tank lever · 2" flapper · Fits Carlin (4722BFT), Cody (4722BET) and Crista (4722BIT) bowls · Applicable for 12" Rough-in bowls only

Overall Dimensions:

Colours To Be Specified:

440mm(W) x 204mm(D) x 350mm(H)

Colour:

Soft White

17¼"(W) x 8"(D) x 13¾"(H)

Compliance Certifications: Notes:

Meets or exceeds the following:

This tank is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

· IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008

Shipping: Tank

1.93 cube 34 lbs (GW)

10mm(⅜") 440mm(17¼") 204mm(8")

350mm (13¾")

Finished Wall

(See Carlin/Cody/Crista for full toilet specs)

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Carlin

4722BFV - Bowl 4721BFV - Lined Tank 4721BFVU - Unlined Tank 4721BFVU-RH - Unlined Tank

4.8Lpf / 1.28Gpf 2pc Round Front Regular Height

(Right Hand Lever - Soft White Only)

10" Rough-In (Soft White Only) 4700BFVU - Unlined Tank 14" Rough-In (Soft White Only)

4724BFV - Lined Tank 4724BFVU - Unlined Tank

TESTED

ÉPREUVE

1000g (12" Rough-in)

Features

Compliance Certifications

• • • • • • •

Meets or exceeds the following:

• • • • •

High efficiency toilet 4.8Lpf / 1.28Gpf Round front bowl Vitreous china 15½" Bowl height Chrome tank lever 10" (254mm),12" (305mm) and 14" (356mm) rough-in tanks available 2" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water surface (209mm x 155mm) 8¼" x 6⅛" 440mm(W) x 670mm(D) x 765mm(H) 17¼"(W) x 26⅜"(D) x 30⅛"(H)

• • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 1000g LEED Compliant

Colours Available: Soft white / Bone / Biscuit Shape of Toilet Seat: Round front (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CARLIN

4.8Lpf / 1.28Gpf 2PC ROUND FRONT REGULAR HEIGHT 4722BFV

Bowl

4721BFV

Lined Tank

4721BFVU

Unlined Tank

4721BFVU-RH

Unlined Tank

(Right Hand Lever - Soft White Only) 10" Rough-In (Soft White Only)

*4700BFVU

Unlined Tank

14" Rough-In (Soft White Only)

*4724BFV

Lined Tank

*4724BFVU

Unlined Tank

Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf

Colours To Be Specified:

· Round front bowl

Colour:

Soft White

· Vitreous china

Bone (055)

· 15½" Bowl height

Biscuit (066)

· Chrome tank lever · 10" (254mm), 12" (305mm) and 14" (356mm) rough-in tanks available · 2" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action · Water surface (209mm x 155mm) 8¼" x 6⅛"

*For further details and specifications please refer to the price book or visit www.contrac.ca

· Toilet seat not included

Overall Dimensions: 440mm(W) x 670mm(D) x 765mm(H) 17¼"(W) x 26⅜"(D) x 30⅛"(H)

10mm(⅜")

670mm(26⅜")

440mm(17¼")

204mm(8")

Compliance Certifications: C/L of seat post holes 140mm(5½")

Meets or exceeds the following: · IAPMO cUPC

Finished Wall

350mm (13¾")

· US EPA WaterSense

420mm(16½")

· ASME A112.19.2 / CSA B45.1-2008 · MaP tested 1000g (12" Rough-in)

356mm(14")

· LEED Compliant

630mm(25")

765mm (30⅛") 393mm (15½")

Shipping: Tank

1.93 cube 34 lbs (GW)

Bowl

3.38 cube 46 lbs (GW)

235mm(9¼")

500mm(19⅝") 305mm(12")

Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Caven

4722BRV - Bowl 4721BFV - Lined Tank 4721BFVU - Unlined Tank 4721BFVU-RH - Unlined Tank

4.8Lpf / 1.28Gpf 2pc 17" High Round Front

(Right Hand Lever)

10" Rough-In

4700BFVU - Unlined Tank 14" Rough-In

4724BFV - Lined Tank 4724BFVU - Unlined Tank

TESTED

ÉPREUVE

800g

Features

Compliance Certifications

• • • • • • •

Meets or exceeds the following:

• • • • •

High efficiency toilet 4.8Lpf / 1.28Gpf Round front bowl Vitreous china 17" Bowl height Chrome tank lever 10" (254mm),12" (305mm) and 14" (356mm) rough-in tanks available 2" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water surface (220mm x 160mm) 8⅝" x 6¼" 440mm(W) x 702mm(D) x 800mm(H) 17¼"(W) x 27⅝"(D) x 31½"(H)

• • • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 800g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Round front (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CAVEN

4.8Lpf / 1.28Gpf 2PC 17" HIGH ROUND FRONT 4722BRV

Bowl

4721BFV

Lined Tank

4721BFVU

Unlined Tank

4721BFVU-RH

Unlined Tank (Right Hand Lever)

10" Rough-In

*4700BFVU

Unlined Tank

14" Rough-In

*4724BFV

Lined Tank

*4724BFVU

Unlined Tank

Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Round front bowl

Colours To Be Specified:

· Vitreous china

Colour:

Soft White

· 17" Bowl height · Chrome tank lever · 10" (254mm), 12" (305mm) and 14" (356mm) rough-in tanks available · 2" Fully glazed ball pass trapway · 3" Flapper

· Siphon jet flush action · Water surface (220mm x 160mm) 8⅝" x 6¼"

Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.

· Toilet seat not included

*For further details and specifications please refer to the price book or visit www.contrac.ca

Overall Dimensions: 440mm(W) x 702mm(D) x 800mm(H) 17¼"(W) x 27⅝"(D) x 31½"(H)

10mm(⅜") 702mm(27⅝")

440mm(17¼")

204mm(8")

Compliance Certifications:

C/L of seat post holes 140mm(5½")

Meets or exceeds the following: · IAPMO cUPC

350mm (13¾")

· US EPA WaterSense

Finished Wall

420mm(16½")

· ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines &

356mm(14")

ANSI A117.1

660mm(26")

800mm (31½") 432mm (17")

· MaP tested 800g

445mm (17½")

· LEED Compliant

Shipping: 247mm(9¾") Tank

1.93 cube 34 lbs (GW)

Bowl

4.6 cube 56 lbs (GW)

528mm(20¾") 305mm(12")

Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Cody

4722BEV - Bowl 4721BFV - Lined Tank 4721BFVU - Unlined Tank 4721BFVU-RH - Unlined Tank

4.8Lpf / 1.28Gpf 2pc Elongated Regular Height

(Right Hand Lever - Soft White Only)

10" Rough-In (Soft White Only) 4700BFVU - Unlined Tank 14" Rough-In (Soft White Only)

4724BFV - Lined Tank 4724BFVU - Unlined Tank

TESTED

ÉPREUVE

800g

Features

Compliance Certifications

• • • • • • •

Meets or exceeds the following:

• • • • •

High efficiency toilet 4.8Lpf / 1.28Gpf Elongated bowl Vitreous china 15½" Bowl height Chrome tank lever 10" (254mm),12" (305mm) and 14" (356mm) rough-in tanks available 2" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water surface (216mm x 165mm) 8½" x 6½" 440mm(W) x 725mm(D) x 760mm(H) 17¼"(W) x 28½"(D) x 30"(H)

• • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant

Colours Available: Soft white / Bone Shape of Toilet Seat: Elongated (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CODY

4.8Lpf / 1.28Gpf 2PC ELONGATED REGULAR HEIGHT 4722BEV

Bowl

4721BFV

Lined Tank

4721BFVU

Unlined Tank

4721BFVU-RH

Unlined Tank

(Right Hand Lever - Soft White Only) 10" Rough-In (Soft White Only)

*4700BFVU

Unlined Tank

14" Rough-In (Soft White Only)

*4724BFV

Lined Tank

*4724BFVU

Unlined Tank

Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Elongated bowl

Colours To Be Specified:

· Vitreous china

Colour:

Soft White Bone (055)

· 15½" Bowl height · Chrome tank lever · 10" (254mm), 12" (305mm) and 14" (356mm) rough-in tanks available · 2" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action · Water surface (216mm x 165mm) 8½" x 6½"

*For further details and specifications please refer to the price book or visit www.contrac.ca

· Toilet seat not included

Overall Dimensions:

10mm(⅜") 725mm(28½")

440mm(W) x 725mm(D) x 760mm(H) 17¼"(W) x 28½"(D) x 30"(H)

440mm(17¼")

204mm(8")

Compliance Certifications:

C/L of Seat Post Holes 140mm(5½")

Meets or exceeds the following: 350mm (13¾")

· IAPMO cUPC · US EPA WaterSense

Finished Wall 470mm(18½")

· ASME A112.19.2 / CSA B45.1-2008 · MaP tested 800g

356mm(14")

· LEED Compliant

690mm(27⅛")

760mm (30") 393mm (15½")

Shipping: Tank

1.93 cube 34 lbs (GW)

Bowl

3.58 cube 48 lbs (GW)

245mm(9⅝")

520mm(20½") 305mm(12") Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Crista

4722BHV - Bowl 4.8Lpf / 1.28Gpf 2pc 17" High Elongated 4721BFV - Lined Tank 4721BFVU - Unlined Tank 4721BFVU-RH - Unlined Tank (Right Hand Lever)

10" Rough-In

4700BFVU - Unlined Tank 14" Rough-In

4724BFV - Lined Tank 4724BFVU - Unlined Tank

TESTED

ÉPREUVE

1000g (12" Rough-in)

Features

Compliance Certifications

• • • • • • •

Meets or exceeds the following:

• • • • •

High efficiency toilet 4.8Lpf / 1.28Gpf Elongated bowl Vitreous china 17" Bowl height Chrome tank lever 10" (254mm),12" (305mm) and 14" (356mm) rough-in tanks available 2" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water surface (216mm x 155mm) 8½" x 6⅛" 440mm(W) x 740mm(D) x 790mm(H) 17¼"(W) x 29⅛"(D) x 31"(H)

• • • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 1000g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Elongated (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CRISTA

4.8Lpf / 1.28Gpf 2PC 17" HIGH ELONGATED 4722BHV

Bowl

4721BFV

Lined Tank

4721BFVU

Unlined Tank

4721BFVU-RH

Unlined Tank (Right Hand Lever)

10" Rough-In

*4700BFVU

Unlined Tank

14" Rough-In

*4724BFV

Lined Tank

*4724BFVU

Unlined Tank

Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Elongated bowl · Vitreous china

Colours To Be Specified:

· 17" Bowl height

Colour:

Soft White

· Chrome tank lever · 10" (254mm), 12" (305mm) and 14" (356mm) rough-in tanks available · 2" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action · Water surface (216mm x 155mm) 8½" x 6⅛" · Toilet seat not included

Overall Dimensions:

*For further details and specifications please refer to the price book or visit www.contrac.ca 10mm(⅜") 740mm(29⅛")

440mm(W) x 740mm(D) x 790mm(H) 17¼"(W) x 29⅛"(D) x 31"(H)

440mm(17¼")

204mm(8")

Compliance Certifications:

C/L of Seat Post Holes 140mm(5½")

Meets or exceeds the following: · IAPMO cUPC

350mm (13¾")

· US EPA WaterSense

Finished Wall 470mm(18½")

· ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines &

356mm(14")

ANSI A117.1

695mm(27⅜")

790mm (31") 432mm (17")

· MaP tested 1000g (12" Rough-in) · LEED Compliant

Shipping: Tank

1.93 cube 34 lbs (GW)

Bowl

3.96 cube 50 lbs (GW)

245mm(9⅝")

520mm(20½") 305mm(12") Finished Floor

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

C/L of Outlet Revised: March 2013

Cane-Locking Tank 4721BFV-L - Lined Tank 4721BFVU-L - Unlined Tank

4.8Lpf / 1.28Gpf

Features

Compliance Certifications

• • • • •

Meets or exceeds the following:

• • • •

High efficiency tank 4.8Lpf / 1.28Gpf Allen key locking mechanism Chrome tank lever Fits Carlin (4722BFV), Caven (4722BRV), Cody (4722BEV) and Crista (4722BHV) bowls Vitreous china 3" Flapper Applicable for 12" Rough-in bowls only 440mm(W) x 204mm(D) x 350mm(H) 17¼"(W) x 8"(D) x 13¾"(H)

• IAPMO cUPC • US EPA WaterSense • ASME A112.19.2 / CSA B45.1-2008

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CANE - LOCKING TANK 4.8Lpf / 1.28Gpf

4721BFV-L

Lined Tank

4721BFVU-L

Unlined Tank

Product Specs: · High efficiency tank · 4.8Lpf / 1.28Gpf · Allen key locking mechanism · Vitreous china · Chrome tank lever · 3" flapper · Fits Carlin (4722BFV), Caven (4722BRV), Cody (4722BEV) and Crista (4722BHV) bowls · Applicable for 12" Rough-in bowls only

Overall Dimensions:

Colours To Be Specified:

440mm(W) x 204mm(D) x 350mm(H)

Colour:

Soft White

17¼"(W) x 8"(D) x 13¾"(H)

Compliance Certifications: Notes:

Meets or exceeds the following:

· IAPMO cUPC · US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008

Shipping: Tank

1.93 cube 34 lbs (GW)

10mm(⅜") 440mm(17¼") 204mm(8")

350mm (13¾")

Finished Wall

(See Carlin/Caven/Cody/Crista for full toilet specs)

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Carson 4720BFW

Lined Tank / Bowl

4720BFWU

6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf 2pc Round Front Dual Flush Regular Height

Unlined Tank / Bowl

TESTED

ÉPREUVE

1000g (Lined Tank)

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency dual flush toilet 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf Round front bowl Vitreous china 15½" Bowl height Soft white top push button 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Dual flush valve Siphon jet flush action Water surface (225mm x 160mm) 8⅞" x 6¼" 440mm(W) x 690mm(D) x 805mm(H) 17¼"(W) x 27⅛"(D) x 31⅝"(H)

• • • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 1000g (Lined tank) MaP tested 800g (Unlined tank) LEED Compliant

Colours Available: Soft white / Bone / Biscuit Shape of Toilet Seat: Round front (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CARSON

6Lpf / 1.6Gpf OR 3Lpf / 0.8Gpf 2PC ROUND FRONT DUAL FLUSH REGULAR HEIGHT 4720BFW

Lined Tank

4720BFWU

Unlined Tank

Colours To Be Specified:

· Siphon jet flush action

Colour:

Soft White

· Water surface (225mm x 160mm) 8⅞" x 6¼"

Bone (055)

· Toilet seat not included

Biscuit (066)

Overall Dimensions: 440mm(W) x 690mm(D) x 805mm(H)

Notes:

17¼"(W) x 27⅛"(D) x 31⅝"(H)

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008

440mm(17¼")

· MaP tested 1000g

10mm(⅜")

690mm(27⅛") 204mm(8")

(Lined tank) C/L of Seat Post Holes 140mm(5½")

· MaP tested 800g (Unlined tank) · LEED Compliant

356mm (14")

Finished Wall 420mm(16½")

Shipping: Cube

6.08

78 lbs

356mm(14")

805mm (31⅝")

657mm(25⅞") 395mm (15½")

252mm(9⅞")

530mm(20⅞") 305mm(12") Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Camri 4720BEW

Lined Tank / Bowl

4720BEWU

6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf 2pc Elongated Dual Flush Regular Height

Unlined Tank / Bowl

TESTED

ÉPREUVE

800g

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency dual flush toilet 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf Elongated bowl Vitreous china 15½" Bowl height Soft white top push button 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Dual flush valve Siphon jet flush action Water Surface (205mm x 150mm) 8" x 6" 440mm(W) x 743mm(D) x 803mm(H) 17¼"(W) x 29¼"(D) x 31⅝"(H)

• • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Elongated (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CAMRI

6Lpf / 1.6Gpf OR 3Lpf / 0.8Gpf 2PC ELONGATED DUAL FLUSH REGULAR HEIGHT 4720BEW

Lined Tank

4720BEWU

Unlined Tank

Product Specs: · High efficiency dual flush toilet · 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf · Elongated bowl · Vitreous china · 15½" Bowl height · Soft white top push button · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway · 3" Dual flush valve · Siphon jet flush action

Colours To Be Specified:

· Water Surface (205mm x 150mm) 8" x 6"

Colour:

Soft White

· Toilet seat not included

Overall Dimensions: Notes:

440mm(W) x 743mm(D) x 803mm(H)

17¼"(W) x 29¼"(D) x 31⅝"(H)

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense

743mm(29¼")

· ASME A112.19.2 / CSA B45.1-2008

10mm(⅜")

205mm (7⅞")

440mm(17¼")

· MaP tested 800g C/L of Seat post holes 140mm(5½")

· LEED Compliant

Shipping: Cube

6.54

86 lbs

356mm (14")

Finished Wall 470mm(18½") 803mm (31⅝") 719mm(28⅞")

356mm(14¼")

395mm (15½")

253mm(9⅞")

515mm(20¼") 305mm(12")

Finished Floor C/L of Outlet CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Cullen 4720BIW

Lined Tank / Bowl

4720BIWU

6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf 2pc 17" High Elongated Dual Flush

Unlined Tank / Bowl

TESTED

ÉPREUVE

800g

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency dual flush toilet 6Lpf / 1.6Gpf or 3.0Lpf / 0.8Gpf Elongated bowl Vitreous china 17" Bowl height Soft white top push button 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Dual flush valve Siphon jet flush action Water surface (240mm x 165mm) 9½" x 6½" 440mm(W) x 750mm(D) x 800mm(H) 17¼"(W) x 29½"(D) x 31½"(H)

• • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Elongated (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CULLEN

6Lpf / 1.6Gpf OR 3Lpf / 0.8Gpf 2PC 17" HIGH ELONGATED DUAL FLUSH 4720BIW

Lined Tank

4720BIWU

Unlined Tank

Product Specs: · High efficiency dual flush toilet · 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf · Elongated bowl · Vitreous china · 17" Bowl height · Soft white top push button · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway · 3" Dual flush valve · Siphon jet flush action

Colours To Be Specified:

· Water surface (240mm x 165mm) 9½" x 6½"

Colour:

Soft White

· Toilet seat not included

Overall Dimensions: 440mm(W) x 750mm(D) x 800mm(H) 17¼"(W) x 29½"(D) x 31½"(H)

Compliance Certifications:

Meets or exceeds the following: · IAPMO cUPC 10mm(⅜")

· US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008

750mm(29½") 205mm(8")

440mm(17¼")

· MaP tested 800g C/L of Seat post holes 140mm(5½")

· LEED Compliant

Shipping: Cube

6.88

89.23 lbs

356mm (14")

Finished Wall 470mm(18½")

356mm(14")

717mm(28¼") 432mm (17")

800mm (31½")

531mm(21") 255mm(10")

305mm(12") Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Cadell

5730BFV - Lined Tank / Bowl 5730BFVU - Unlined Tank / Bowl

3.8Lpf / 1Gpf 2pc Round Front Regular Height

Running change for square foot print

TESTED

ÉPREUVE

600g

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency toilet 3.8Lpf / 1Gpf Round front bowl Vitreous china 15½" Bowl height Soft white tank lever 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water surface (225mm x 160mm) 8⅞" x 6¼" 440mm(W) x 690mm(D) x 803mm(H) 17¼"(W) x 27⅛"(D) x 31⅝"(H)

• • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 600g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Round front (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CADELL

3.8Lpf / 1Gpf 2PC ROUND FRONT REGULAR HEIGHT 5730BFV 5730BFVU

Lined Tank Unlined Tank

Product Specs: · High efficiency toilet · 3.8Lpf / 1Gpf · Round front bowl · Vitreous china · 15½" Bowl height · Soft white tank lever · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action · Water surface (225mm x 160mm) 8⅞" x 6¼" Colours To Be Specified:

· Toilet seat not included

Colour:

Overall Dimensions:

Soft White

440mm(W) x 690mm(D) x 803mm(H) 17¼"(W) x 27⅛"(D) x 31⅝"(H)

Compliance Certifications: Meets or exceeds the following:

· IAPMO cUPC · US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008 · MaP tested 600g · LEED Compliant 440mm(17¼")

690mm(27⅛")

Shipping: Cube

6.08

97 lbs

10mm(⅜") 202mm(8")

C/L of Seat post holes 140mm (5½") 356mm (14")

Finished wall

420mm(16½")

657mm(25⅝")

356mm(14")

803mm (31⅝")

394mm (15½")

530mm(20⅞")

250mm(9⅞")

305mm(12")

Finished floor C/L of Outlet CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Cato

5730BEV - Lined Tank / Bowl 5730BEVU - Unlined Tank / Bowl

3.8Lpf / 1Gpf 2pc Elongated Regular Height

Running change for square foot print

TESTED

ÉPREUVE

600g

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency toilet 3.8Lpf / 1Gpf Elongated bowl Vitreous china 15½" Bowl height Soft white tank lever 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water surface (205mm x 150mm) 8" x 6" 440mm(W) x 744mm(D) x 803mm(H) 17¼"(W) x 29¼"(D) x 31½"(H)

• • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 600g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Elongated (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CATO

3.8Lpf / 1Gpf 2PC ELONGATED REGULAR HEIGHT 5730BEV 5730BEVU

Lined Tank Unlined Tank

Product Specs: · High efficiency toilet · 3.8Lpf / 1Gpf · Elongated bowl · Vitreous china · 15½" Bowl height · Soft white tank lever · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action · Water surface (205mm x 150mm) 8" x 6" Colours To Be Specified:

· Toilet seat not included

Colour:

Overall Dimensions:

Soft White

440mm(W) x 744mm(D) x 803mm(H) 17¼"(W) x 29¼"(D) x 31½"(H) Notes:

Compliance Certifications: Meets or exceeds the following:

· IAPMO cUPC · US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008 · MaP tested 600g 440mm(17¼")

· LEED Compliant

744mm(29¼")

10mm(⅜") 202mm(8")

Shipping: Cube

6.54

92 lbs

C/L of Seat post holes 140mm (5½") 356mm (14")

Finished wall

470mm(18½")

719mm(28⅜")

356mm(14")

803mm (31½")

392mm (15½")

253mm(9⅞")

515mm(20¼")

305mm(12")

Finished floor C/L of Outlet CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Clancy

5730BIV - Lined Tank / Bowl 5730BIVU - Unlined Tank / Bowl

TESTED

3.8Lpf / 1Gpf 2pc 17" High Round Front

ÉPREUVE

600g

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency toilet 3.8Lpf / 1Gpf Round front bowl Vitreous china 17" Bowl height Soft white tank lever 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water Surface (220mm x 160mm) 8⅝" x 6¼" 440mm(W) x 702mm(D) x 800mm(H) 17¼"(W) x 27⅝"(D) x 31½"(H)

• • • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 600g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Round front (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CLANCY

3.8Lpf / 1Gpf 2PC 17" HIGH ROUND FRONT 5730BIV 5730BIVU

Lined Tank Unlined Tank

Product Specs: · High efficiency toilet · 3.8Lpf / 1Gpf · Round front bowl · Vitreous china · 17" Bowl height · Soft white tank lever · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action · Water Surface (220mm x 160mm) 8⅝" x 6¼" · Toilet seat not included

Colours To Be Specified: Colour:

Overall Dimensions:

Soft White

440mm(W) x 702mm(D) x 800mm(H) 17¼"(W) x 27⅝"(D) x 31½"(H) Notes:

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC

This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA / ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.

· US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1 · MaP Tested 600g · LEED Compliant

702mm(27⅝")

6.38

89 lbs

202mm(8")

440mm(17¼")

Shipping: Cube

10mm(⅜")

C/L of Seat post holes 140mm (5½") 356mm (14")

Finished wall

420mm(16½")

660mm(26")

356mm(14") 800mm (31½")

245mm(9⅝" )

430mm (17")

528mm(20⅞")

305mm(12")

Finished floor C/L of Outlet CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Case

5730BOV - Lined Tank / Bowl 5730BOVU - Unlined Tank / Bowl

3.8Lpf / 1Gpf 2pc 17" High Elongated

Running change for square foot print

TESTED

ÉPREUVE

600g

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency toilet 3.8Lpf / 1Gpf Elongated bowl Vitreous china 17" Bowl height Soft white tank lever 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water Surface (220mm x 170mm) 8⅝" x 6⅝" 440mm(W) x 754mm(D) x 802mm(H) 17¼"(W) x 29⅝"(D) x 31½"(H)

• • • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 600g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Elongated (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CASE

3.8Lpf / 1Gpf 2PC 17" HIGH ELONGATED 5730BOV 5730BOVU

Lined Tank Unlined Tank

Product Specs: · High efficiency toilet · 3.8Lpf / 1Gpf · Elongated bowl · Vitreous china · 17" Bowl height · Soft white tank lever · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action · Water Surface (220mm x 170mm) 8⅝" x 6⅝" Colours To Be Specified:

· Toilet seat not included

Colour:

Overall Dimensions:

Soft White

440mm(W) x 754mm(D) x 802mm(H) 17¼"(W) x 29⅝"(D) x 31½"(H)

Notes:

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC

· US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1 · MaP Tested 600g

754mm(29⅝")

· LEED Compliant

6.9

91 lbs

202mm(8")

440mm(17¼")

Shipping: Cube

10mm(⅜")

C/L of Seat post holes 140mm (5½") 356mm (14")

Finished wall

470mm(18½")

356mm(14")

717mm(28") 802mm (31½")

430mm (17")

250mm(9⅞" )

531mm(21")

305mm(12")

Finished floor C/L of Outlet CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Total Toilet Carlin 4720BFT-TT

6Lpf / 1.6Gpf 2pc Round Front Regular Height

Lined Tank / Bowl

Direct import (CIF) only - Please contact your sales representative for further information.

TESTED

ÉPREUVE

800g

Features

Compliance Certifications

• • • • • • • • • • •

Meets or exceeds the following:

Low consumption toilet 6Lpf / 1.6Gpf Round front bowl Vitreous china 15½" Bowl height Chrome tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway Siphon jet flush action Water surface (210mm x 156mm) 8¼" x 6¼" Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat • 440mm(W) x 670mm(D) x 765mm(H) 17¼"(W) x 26⅜"(D) x 30⅛"(H)

• • • •

IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Round front (Included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

TOTAL TOILET CARLIN

6Lpf / 1.6Gpf 2PC ROUND FRONT REGULAR HEIGHT 4720BFT-TT

Lined Tank

Product Specs: · Low consumption toilet · 6Lpf / 1.6Gpf · Round front bowl · Vitreous china · 15½" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · Siphon jet flush action · Water surface (210mm x 156mm) 8¼" x 6¼ " · Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat

Overall Dimensions:

Colours To Be Specified: Colour:

440mm(W) x 670mm(D) x 765mm(H)

Soft White

17¼"(W) x 26⅝"(D) x 30⅛"(H)

Compliance Certifications:

Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 · MaP tested 800g · LEED Compliant

Shipping: Cube

5.89

80 lbs

10mm(⅜")

670mm(26⅝")

440mm(17¼")

204mm(8")

C/L of seat post holes 140mm(5½") 350mm (13¾")

356mm(14")

Finished Wall

420mm(16½")

630mm(25")

765mm (30⅛") 393mm (15½")

235mm(9¼")

500mm(19⅝") 305mm(12")

Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Total Toilet Carlin 4720BFV-TT

Lined Tank / Bowl

4.8Lpf / 1.28Gpf 2pc Round Front Regular Height

Direct import (CIF) only - Please contact your sales representative for further information.

TESTED

ÉPREUVE

1000g

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency toilet 4.8Lpf / 1.28Gpf Round front bowl Vitreous china 15½" Bowl height Chrome tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water surface (209mm x 155mm) 8¼" x 6⅛" Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat • 440mm(W) x 670mm(D) x 765mm(H) 17¼"(W) x 26⅜"(D) x 30⅛"(H)

• • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 1000g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Round front (Included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

TOTAL TOILET CARLIN

4.8Lpf / 1.28Gpf 2PC ROUND FRONT REGULAR HEIGHT 4720BFV-TT

Lined Tank

Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Round front bowl · Vitreous china · 15½" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action · Water surface (209mm x 155mm) 8¼" x 6⅛" · Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat Colours To Be Specified:

Overall Dimensions:

Colour:

Soft White

440mm(W) x 670mm(D) x 765mm(H) 17¼"(W) x 26⅜"(D) x 30⅛"(H)

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008 · MaP tested 1000g · LEED Compliant

10mm(⅜")

670mm(26⅜")

440mm(17¼")

204mm(8")

Shipping: Cube

5.89

80 lbs

C/L of seat post holes 140mm(5½") 350mm (13¾")

356mm(14")

Finished Wall

420mm(16½")

630mm(25")

765mm (30⅛") 393mm (15½")

235mm(9¼")

500mm(19⅝") 305mm(12")

Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Total Toilet Caven 4720BRV-TT

4.8Lpf / 1.28Gpf 2pc 17" High Round Front

Lined Tank / Bowl

Direct import (CIF) only - Please contact your sales representative for further information.

TESTED

ÉPREUVE

800g

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency toilet 4.8Lpf / 1.28Gpf Round front bowl Vitreous china 17" Bowl height Chrome tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water surface (220mm x 160mm) 8⅝" x 6¼" Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat • 440mm(W) x 702mm(D) x 800mm(H) 17¼"(W) x 27⅝"(D) x 31½"(H)

• • • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 800g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Round front (Included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

TOTAL TOILET CAVEN

4.8Lpf / 1.28Gpf 2PC 17" HIGH ROUND FRONT

4720BRV-TT

Lined Tank

Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Round front bowl · Vitreous china · 17" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action · Water surface (220mm x 160mm) 8⅝" x 6¼" · Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat

Colours To Be Specified: Colour:

Soft White

Overall Dimensions: 440mm(W) x 702mm(D) x 800mm(H) 17¼"(W) x 27⅝"(D) x 31½"(H)

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC

Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.

· US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1

10mm(⅜")

702mm(27⅝")

440mm(17¼")

204mm(8")

· MaP tested 800g · LEED Compliant

C/L of seat post holes 140mm(5½")

Shipping: Cube

6.38

89 lbs

350mm (13¾")

356mm(14")

Finished Wall

420mm(16½")

660mm(26")

800mm (31½") 432mm (17")

247mm(9¾")

445mm (17½")

528mm(20¾") 305mm(12")

Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Total Toilet Cody 4720BEV-TT

4.8Lpf / 1.28Gpf 2pc Elongated Regular Height

Lined Tank / Bowl

Direct import (CIF) only - Please contact your sales representative for further information.

TESTED

ÉPREUVE

800g

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency toilet 4.8Lpf / 1.28Gpf Elongated bowl Vitreous china 15½" Bowl height Chrome tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water surface (216mm x 165mm) 8½" x 6½" Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat • 440mm(W) x 725mm(D) x 760mm(H) 17¼"(W) x 28½"(D) x 30"(H)

• • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Elongated (Included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

TOTAL TOILET CODY

4.8Lpf / 1.28Gpf 2PC ELONGATED REGULAR HEIGHT 4720BEV-TT

Lined Tank

Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Elongated bowl · Vitreous china · 15½" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action · Water surface (216mm x 165mm) 8½" x 6½" · Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat

Colours To Be Specified:

Overall Dimensions:

Colour:

Soft White

440mm(W) x 725mm(D) x 760mm(H) 17¼"(W) x 28½"(D) x 30"(H)

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008

10mm(⅜")

· MaP tested 800g · LEED Compliant

725mm(28½") 440mm(17¼")

204mm(8")

Shipping: Cube

6.51

89 lbs

C/L of Seat Post Holes 140mm(5½") 350mm (13¾")

Finished Wall 470mm(18½")

356mm(14")

690mm(27⅛")

760mm (30") 393mm (15½")

245mm(9⅝")

520mm(20½") 305mm(12") Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Total Toilet Crista 4720BHV-TT

Lined Tank / Bowl

4.8Lpf / 1.28Gpf 2pc 17" High Elongated

Direct import (CIF) only - Please contact your sales representative for further information.

TESTED

ÉPREUVE

1000g

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency toilet 4.8Lpf / 1.28Gpf Elongated bowl Vitreous china 17" Bowl height Chrome tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water surface (216mm x 155mm) 8½" x 6⅛" Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat • 440mm(W) x 740mm(D) x 790mm(H) 17¼"(W) x 29⅛"(D) x 31"(H)

• • • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 1000g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Elongated (Included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

TOTAL TOILET CRISTA

4.8Lpf / 1.28Gpf 2PC 17" HIGH ELONGATED

4720BHV-TT

Lined Tank

Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Elongated bowl · Vitreous china · 17" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action · Water surface (216mm x 155mm) 8½" x 6⅛" · Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat Colours To Be Specified:

Overall Dimensions:

Colour:

Soft White

440mm(W) x 740mm(D) x 790mm(H) 17¼"(W) x 29⅛"(D) x 31"(H)

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC

Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.

· US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008

10mm(⅜")

· ADA Guidelines & ANSI A117.1

740mm(29⅛")

440mm(17¼")

204mm(8")

· MaP tested 1000g · LEED Compliant

C/L of Seat Post Holes 140mm(5½")

Shipping: Cube

7.0

91 lbs

350mm (13¾")

Finished Wall 470mm(18½")

356mm(14")

695mm(27⅜")

790mm (31") 432mm (17")

245mm(9⅝")

520mm(20½") 305mm(12") Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Total Toilet Carson 4720BFW-TT

Lined Tank / Bowl

6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf 2pc Round Front Dual Flush Regular Height

Direct import (CIF) only - Please contact your sales representative for further information.

TESTED

ÉPREUVE

1000g

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency dual flush toilet 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf Round front bowl Vitreous china 15½" Bowl height Soft white top push button 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Dual flush valve Siphon jet flush action Water surface (225mm x 160mm) 8⅞" x 6¼" Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat • 440mm(W) x 690mm(D) x 805mm(H) 17¼"(W) x 27⅛"(D) x 31⅝"(H)

• • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 1000g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Round front (Included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

TOTAL TOILET CARSON

6Lpf / 1.6Gpf OR 3Lpf / 0.8Gpf 2PC ROUND FRONT DUAL FLUSH REGULAR HEIGHT 4720BFW-TT

Lined Tank

Product Specs: · High efficiency dual flush toilet · 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf · Round front bowl · Vitreous china · 15½" Bowl height · Soft white top push button · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway · 3" Dual flush valve · Siphon jet flush action · Water surface (225mm x 160mm) 8⅞" x 6¼" · Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat

Colours To Be Specified:

Overall Dimensions:

Colour:

Soft White

440mm(W) x 690mm(D) x 805mm(H) 17¼"(W) x 27⅛"(D) x 31⅝"(H)

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008 440mm(17¼")

· LEED Compliant

10mm(⅜")

690mm(27⅛")

· MaP tested 1000g

204mm(8")

Shipping: Cube

6.08

78 lbs

C/L of Seat Post Holes 140mm(5½")

356mm (14")

Finished Wall 420mm(16½")

356mm(14")

805mm (31⅝")

657mm(25⅞") 395mm (15½")

252mm(9⅞")

530mm(20⅞") 305mm(12") Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Chloe

5710BFT - Lined Tank 5710BFTU - Unlined Tank*

6Lpf / 1.6Gpf 1pc Round Front Regular Height

*(Direct import (CIF) only - Please contact your sales representative for further information.)

TESTED

ÉPREUVE

600g

Features

Compliance Certifications

• • • • • • • • • • •

Meets or exceeds the following:

Low consumption toilet 6Lpf / 1.6Gpf Round front bowl Vitreous china 15¾" Bowl height Chrome tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway Siphon jet flush action Water Surface (200mm x 150mm) 7⅞" x 6" 429mm(W) x 672mm(D) x 689mm(H) 16⅞"(W) x 26½"(D) x 27⅛"(H)

• • • •

IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 MaP tested 600g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Round front (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CHLOE

6Lpf / 1.6Gpf 1PC ROUND FRONT REGULAR HEIGHT 5710BFT 5710BFTU

Lined Tank Unlined Tank

Product Specs: · Low consumption toilet · 6Lpf / 1.6Gpf · Round front bowl · Vitreous china · 15¾" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · Siphon jet flush action · Water surface (200mm x 150mm) 7⅞" x 6" · Toilet seat not included

Colours To Be Specified: Colour:

Overall Dimensions:

Soft White

429mm(W) x 672mm(D) x 689mm(H) 16⅞"(W) x 26½"(D) x 27⅛"(H) Notes:

Compliance Certifications:

Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 · MaP tested 600g · LEED Compliant

Shipping: Cube

7.48

83 lbs

10mm(⅜") 672mm(26½")

429mm(16⅞")

C/L of Seat Post Holes 140mm(5½")

Finished Wall

420mm(16½")

689mm (27⅛")

265mm(10½")

400mm (15¾")

515mm(20¼") 305mm(12")

Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: May 2013

Caden

5710BET-TS - Lined Tank

6Lpf / 1.6Gpf 1pc Elongated Regular Height

Running change to soft white tank lever TESTED

ÉPREUVE

600g

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

Low consumption toilet 6Lpf / 1.6Gpf Elongated bowl Vitreous china 15¾" Bowl height Soft white tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway Siphon jet flush action Water Surface (275mm x 210mm) 10⅞" x 8¼" Smooth close toilet seat included 423mm(W) x 723mm(D) x 663mm(H) 16⅝"(W) x 28½"(D) x 26⅛"(H)

• • • •

IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 MaP tested 600g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Elongated (Included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CADEN

6Lpf / 1.6Gpf 1PC ELONGATED REGULAR HEIGHT

5710BET-TS

Lined Tank

Product Specs: · Low consumption toilet · 6Lpf / 1.6Gpf · Elongated bowl · Vitreous china · 15¾" Bowl height · Soft white tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · Siphon jet flush action · Water Surface (275mm x 210mm) 10⅞" x 8¼" · Smooth close toilet seat included

Overall Dimensions:

Colours To Be Specified: Colour:

423mm(W) x 723mm(D) x 663mm(H)

Soft White

16⅝"(W) x 28½"(D) x 26⅛"(H)

Compliance Certifications: Notes:

Meets or exceeds the following:

· IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 · MaP tested 600g · LEED Compliant

Shipping: Cube

7.25

90 lbs

10mm(⅜") 723mm(28½")

423mm(16⅝")

C/L of Seat Post Holes 140mm(5½")

Finished Wall

470mm(18½")

400mm 663mm (15¾") (26⅛")

272mm(10¾")

543mm(21⅜") 305mm(12")

Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: May 2013

Chloe

4710BFV - Lined Tank 4710BFVU - Unlined Tank*

*(Direct import (CIF) only - Please contact your sales representative for further information.)

TESTED

4.8Lpf / 1.28Gpf 1pc Round Front Regular Height

ÉPREUVE

800g

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency toilet 4.8Lpf / 1.28Gpf Round front bowl Vitreous china 15¾" Bowl height Chrome tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water Surface (209mm x 150mm) 8¼" x 6" 429mm(W) x 672mm(D) x 689mm(H) 16⅞"(W) x 26½"(D) x 27⅛"(H)

• • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Round front (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CHLOE

4.8Lpf / 1.28Gpf 1PC ROUND FRONT REGULAR HEIGHT

4710BFV 4710BFVU

Lined Tank Unlined Tank

Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Round front bowl · Vitreous china · 15¾" Bowl height · Chrome tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action · Water Surface (209mm x 150mm) 8¼" x 6" Colours To Be Specified:

· Toilet seat not included

Colour:

Soft White

Overall Dimensions: 429mm(W) x 672mm(D) x 689mm(H) 16⅞"(W) x 26½"(D) x 27⅛"(H)

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008

10mm(⅜")

· MaP Tested 800g · LEED Compliant

672mm(26½")

429mm(16⅞")

Shipping: Cube

8.29

89 lbs

C/L of Seat Post Holes 140mm(5½")

Finished Wall

420mm(16½")

689mm (27⅛")

265mm(10½")

400mm (15¾")

515mm(20¼") 305mm(12")

Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Caden

4710BEV-TS - Lined Tank

TESTED

4.8Lpf / 1.28Gpf 1pc Elongated Regular Height

ÉPREUVE

800g

Features

Compliance Certifications

• • • • • • • • • • • • •

Meets or exceeds the following:

High efficiency toilet 4.8Lpf / 1.28Gpf Elongated bowl Vitreous china 15¾" Bowl height Soft white tank lever 12" (305mm) Rough-in 2" Fully glazed ball pass trapway 3" Flapper Siphon jet flush action Water Surface (230mm x 160mm) 9" x 6¼" Smooth close toilet seat included 423mm(W) x 723mm(D) x 663mm(H) 16⅝"(W) x 28½"(D) x 26⅛"(H)

• • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Elongated (Included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CADEN

4.8Lpf / 1.28Gpf 1PC ELONGATED REGULAR HEIGHT

4710BEV-TS

Lined Tank

Product Specs: · High efficiency toilet · 4.8Lpf / 1.28Gpf · Elongated bowl · Vitreous china · 15¾" Bowl height · Soft white tank lever · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · 3" Flapper · Siphon jet flush action · Water Surface (230mm x 160mm) 9" x 6¼" · Smooth close toilet seat included

Colours To Be Specified: Colour:

Soft White

Overall Dimensions: 423mm(W) x 723mm(D) x 663mm(H) 16⅝"(W) x 28½"(D) x 26⅛"(H) Notes: This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008 · MaP Tested 800g · LEED Compliant

10mm(⅜") 723mm(28½")

423mm(16⅝")

Shipping: Cube

7.25

90 lbs

C/L of Seat Post Holes 140mm(5½")

Finished Wall

470mm(18½")

400mm 663mm (15¾") (26⅛")

272mm(10¾")

543mm(21⅜") 305mm(12")

Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: May 2013

Caldwell

4710BIV - Lined Tank 4710BIV-L - Lined Locking Tank*

4.8Lpf / 1.28Gpf 1pc 17" High Elongated

*(Direct import (CIF) only - Please contact your sales representative for further information.)

Optional

TESTED

ÉPREUVE

800g

Features

Compliance Certifications

• • • • • • •

Meets or exceeds the following:

• • • • • •

High efficiency toilet 4.8Lpf / 1.28Gpf Elongated bowl Vitreous china 17" Bowl height Chrome top push button Allen key locking mechanism (applicable only on locking tank option) 12" (305mm) Rough-in 2" Fully glazed ball pass trapway 3" Flush valve Siphon jet flush action Water Surface (220mm x 150mm) 8⅝" x 6" 381mm(W) x 730mm(D) x 714mm(H) 15"(W) x 28¾"(D) x 28⅛"(H)

• • • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 800g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Elongated (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CALDWELL

4.8Lpf / 1.28Gpf 1PC 17" HIGH ELONGATED

4710BIV

Lined Tank

4710BIV-L

Lined Locking Tank (optional)

Product Specs: Optional

· High efficiency toilet · 4.8Lpf / 1.28Gpf · Elongated bowl · Vitreous china · 17" Bowl height · Chrome top push button · Allen key locking mechanism (applicable only on locking tank option) · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway

Colours To Be Specified:

· 3" Flush valve

Colour:

Soft White

· Siphon jet ﬂush action · Water Surface (220mm x 150mm) 8⅝" x 6" · Toilet seat not included

Overall Dimensions: 381mm(W) x 730mm(D) x 714mm(H) 15"(W) x 28¾"(D) x 28⅛"(H)

Compliance Certifications:

Notes: This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.

Meets or exceeds the following:

10mm(⅜")

· IAPMO cUPC

730mm(28¾")

· US EPA WaterSense

381mm(15")

200mm(8")

· ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1

C/L of Seat Post Holes 140mm(5½")

· MaP tested 800g · LEED Compliant

Finished Wall

Shipping: Cube

8.8

85 lbs

470mm(18½")

356mm(14") 714mm (28⅛")

255mm(10")

435mm (17")

600mm(23⅝") 305mm(12")

Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Cartwright 4710BRV - Lined Tank 4710BRV-L - Lined Locking Tank

4.8Lpf / 1.28Gpf 1pc 17" High Round Front

Optional Direct import (CIF) only - Please contact your sales representative for further information.

TESTED

ÉPREUVE

800g

Features

Compliance Certifications

• • • • • • •

Meets or exceeds the following:

• • • • • •

High efficiency toilet 4.8Lpf / 1.28Gpf Round front bowl Vitreous china 17" Bowl height Chrome top push button Allen key locking mechanism (applicable only on locking tank option) 12" (305mm) Rough-in 2" Fully glazed ball pass trapway 3" Flush valve Siphon jet flush action Water Surface (210mm x 180mm) 8¼" x 7" 381mm(W) x 680mm(D) x 714mm(H) 15"(W) x 26¾"(D) x 28⅛"(H)

• • • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 800g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Round Front (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CARTWRIGHT

4.8Lpf / 1.28Gpf 1PC 17" HIGH ROUND FRONT

4710BRV

Lined Tank

4710BRV-L

Lined Locking Tank (optional)

Product Specs: · High efficiency toilet

Optional

· 4.8Lpf / 1.28Gpf · Round front bowl · Vitreous china · 17" Bowl height · Chrome top push button · Allen key locking mechanism (applicable only on locking tank option) · 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway

Colours To Be Specified:

· 3" Flush valve

Colour:

· Siphon jet ﬂush action

Soft White

· Water Surface (210mm x 180mm) 8¼" x 7" · Toilet seat not included

Overall Dimensions: 381mm(W) x 680mm(D) x 714mm(H) 15"(W) x 26¾"(D) x 28⅛"(H)

Compliance Certifications:

Notes:

This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.

Meets or exceeds the following: · IAPMO cUPC

10mm(⅜")

· US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008

680mm(26¾")

381mm(15")

200mm(8")

· ADA Guidelines & ANSI A117.1 C/L of Seat Post Holes 140mm(5½")

· MaP tested 800g · LEED Compliant

Shipping: Cube

7.64

98 lbs

Finished Wall

420mm(16½")

356mm(14") 714mm (28⅛")

255mm(10")

435mm (17")

550mm(21⅝") 305mm(12")

Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Claire

5710BFX - Lined Tank 5710BFXU - Unlined Tank

(Direct import (CIF) only - Please contact your sales representative for further information.)

TESTED

4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf 1pc Round Front Dual Flush Regular Height

ÉPREUVE

800g

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency dual flush toilet 4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf Round front bowl Vitreous china 15½" Bowl height Soft white top push button 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Dual flush valve Siphon jet flush action Water Surface (210mm x 155mm) 8¼" x 6⅛" 383mm(W) x 687mm(D) x 730mm(H) 15"(W) x 27"(D) x 28¾"(H)

• • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Round front (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CLAIRE

4.8Lpf / 1.28Gpf OR 3Lpf / 0.8Gpf 1PC ROUND FRONT DUAL FLUSH REGULAR HEIGHT 5710BFX

Lined Tank

5710BFXU

Unlined Tank

Product Specs: · High efficiency dual flush toilet · 4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf · Round front bowl · Vitreous china · 15½" Bowl height · Soft white top push button · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway · 3" Dual flush valve · Siphon jet flush action

Colours To Be Specified:

· Water Surface (210mm x 155mm) 8¼" x 6⅛"

Colour:

Soft White

· Toilet seat not included

Overall Dimensions: 383mm(W) x 687mm(D) x 730mm(H) 15"(W) x 27"(D) x 28¾"(H)

Compliance Certifications:

Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense 10mm(⅜")

· ASME A112.19.2 / CSA B45.1-2008 · MaP Tested 800g

687mm(27") 383mm(15")

· LEED Compliant

Shipping: Cube

7.50

88 lbs

C/L of Seat Post Holes

Finished Wall 420mm(16½")

730mm (28¾")

243mm(9½")

394mm (15½")

557mm(22") 305mm(12")

Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Canby

5710BEX - Lined Tank 5710BEXU - Unlined Tank

(Direct import (CIF) only - Please contact your sales representative for further information.)

TESTED

4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf 1pc Elongated Dual Flush Regular Height

ÉPREUVE

800g

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency dual flush toilet 4,8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf Elongated bowl Vitreous china 15½" Bowl height Soft white top push button 12" (305mm) Rough-in 1¾" Fully glazed ball pass trapway 3" Dual flush valve Siphon jet flush action Water Surface (225mm x 165mm) 8⅞" x 6½" 385mm(W) x 742mm(D) x 730mm(H) 15⅛"(W) x 29¼"(D) x 28¾"(H)

• • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Elongated (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CANBY

4.8Lpf / 1.28Gpf OR 3Lpf / 0.8Gpf 1PC DUAL FLUSH ELONGATED REGULAR HEIGHT 5710BEX

Lined Tank

5710BEXU

Unlined Tank

Product Specs: · High efficiency dual flush toilet · 4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf · Elongated bowl · Vitreous china · 15½" Bowl height · Soft white top push button · 12" (305mm) Rough-in · 1¾" Fully glazed ball pass trapway · 3" Dual flush valve · Siphon jet flush action

Colours To Be Specified:

· Water Surface (225mm x 165mm) 8⅞" x 6½"

Colour:

Soft White

· Toilet seat not included

Overall Dimensions: 385mm(W) x 742mm(D) x 730mm(H)

Notes:

15⅛"(W) x 29¼"(D) x 28¾"(H)

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense

10mm(⅜")

· ASME A112.19.2 / CSA B45.1-2008 · MaP Tested 800g

742mm(29¼")

385mm(15⅛")

· LEED Compliant

Shipping: Cube

8.23

88 lbs

C/L of Seat Post Holes 140mm(5½")

Finished Wall 470mm(18½")

730mm (28¾")

246mm(9⅝")

394mm (15½")

560mm(22") 305mm(12")

Finished Floor

C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Round Front TS6120SC

Toilet Seat

Features • • • • •

Smooth close plastic toilet seat Fits all standard round front toilet bowls Individually boxed 5 Pieces in master carton 365mm(W) x 429mm(D) x 25mm(H) 14⅜"(W) x 16⅞"(D) x 1"(H)

Colours Available: Soft white / Bone / Biscuit

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

ROUND FRONT TOILET SEAT

TS6120SC

Round Front

Product Specs: · Smooth close plastic toilet seat · Fits all standard round front toilet bowls · Individually boxed · 5 Pieces in master carton

Overall Dimensions: 365mm(W) x 429mm(D) x 25mm(H) 14⅜"(W) x 16⅞"(D) x 1"(H)

Shipping: Colours To Be Specified: Cube

0.38

Colour:

Soft White

4.5 (Master carton)

Bone (055)

3.7 lbs

Biscuit (066)

60 lbs (Master carton)

5½"

16⅞" 10¼"

8¼" 14⅜"

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Elongated Front TS7150SC

Toilet Seat

Features • • • • •

Smooth close plastic toilet seat Fits all standard elongated front toilet bowls Individually boxed 5 Pieces in master carton 368mm(W) x 480mm(D) x 25mm(H) 14½"(W) x 18⅞"(D) x 1"(H)

Colours Available: Soft white / Bone / Biscuit

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

ELONGATED FRONT TOILET SEAT

TS7150SC

Elongated Front

Product Specs: · Smooth close plastic toilet seat · Fits all standard elongated front toilet bowls · Individually boxed · 5 Pieces in master carton

Overall Dimensions: 368mm(W) x 480mm(D) x 25mm(H) 14½"(W) x 18⅞"(D) x 1"(H)

Shipping: Colours To Be Specified: Cube

0.47

Colour:

Soft White

5.48 (Master carton)

Bone (055)

4.2 lbs

Biscuit (066)

45 lbs (Master carton)

5½"

18⅞" 12⅜"

8⅝" 14½"

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Cale 4830BLX

4 Hole Bidet

Features

Compliance Certifications

• Vitreous china • 15½" Bowl height • 4 Holes (3 faucet holes with 8" center and 1 small hole for pop-up rod) • Fits deck mounted fitting • Flushing rim • Vertical cleansing spray • Integral overflow • Faucet not included • 374mm(W) x 645mm(D) x 395mm(H) 14¾"(W) x 25⅜"(D) x 15½"(H)

Meets or exceeds the following: • IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CALE

4-HOLE BIDET

4830BLX

4-Hole Bidet

Product Specs: · Vitreous china · 15½" Bowl height · 4 Holes (3 faucet holes with 8" center and 1 small hole for pop-up rod) · Fits deck mounted fitting · Flushing rim · Vertical cleansing spray · Integral overflow · Faucet not included

Overall Dimensions: 374mm(W) x 645mm(D) x 395mm(H)

Colours To Be Specified:

14¾"(W) x 25⅜"(D) x 15½"(H)

Colour:

Soft White

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC

Notes:

· ASME A112.19.2 / CSA B45.1 - 2008

▲ Dimensions shown for location of supplies are suggested. "P"trap and fittings not furnished with bidet and must be ordered separately. Provisions must be made for the installation of trap in floor.

Shipping:

• Refer to installation instructions supplied with Bidet and fitting for additional information.

Cube 4.00 GW

44 lbs

Finished Wall

●

65mm (2½")

374mm (14¾")

645mm(25⅜")

395mm (15½")

Wall Supply

Floor Supply

Lag Bolts

125mm(5") 335mm (13⅛")

280mm (11")

Finished Floor

235mm(9¼")

Finished Floor

282mm (11½")

102mm (4")

Ø35mm (1⅜")

Ø64mm (2½")

204mm (8") Ø44mm (1¾")

Ø24mm (1")

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Catalina 4110BGW - Single Hole 4140BGW - 4" Center 4180BGW - 8" Center

Oval Drop-In Sink

Features

Compliance Certifications

• • • • • •

Meets or exceeds the following:

Vitreous china Front overflow hole Single hole, 4" or 8" faucet center Template supplied Faucet not included 516mm(W) x 435mm(D) x 195mm(H) 20⅜"(W) x 17⅛"(D) x 7⅝"(H)

• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 • ADA Section 4.19

Colours Available: Soft white / Bone / Biscuit

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CATALINA

OVAL DROP-IN SINK

4110BGW

Single Hole

4140BGW

4" Center

4180BGW

8" Center

Product Specs: · Vitreous china · Front overflow hole · Single hole, 4" or 8" faucet center · Template supplied · Faucet not included

Overall Dimensions: 516mm(W) x 435mm(D) x 195mm(H)

Colours To Be Specified:

20⅜"(W) x 17⅛"(D) x 7⅝"(H)

Colour:

Soft White Bone (055)

Compliance Certifications:

Biscuit (066)

Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008

Notes:

· ADA Section 4.19

Shipping: Cube

1.84

17 lbs

This product is designed to comply with ADA requirements, if installed according to the standard. It is the responsibility of the installer to comply with this standard prior to installation.

516mm(20⅜")

Single Hole, 102mm(4") or 204mm(8") 3 Holes 32mm(1¼")

260mm (10¼") Counter Top

64mm (2½") 182mm (7⅛")

44 mm (1¾") 64 mm (2½")

318mm (12½")

204mm (8") Supplies As Required

1¼" O.D. Waste

435mm(17⅛") Counter top cut out 478mm x 394mm (18⅞" x 15½")

195mm 155mm (7⅝") (6⅛")

Overflow Hole Note: Dimensions shown for location of supplied and waste are suggested.

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Cailyn

4110BRW - Single Hole 4140BRW - 4" Center 4180BRW - 8" Center

Round Drop-In Sink

Features

Compliance Certifications

• • • • • •

Meets or exceeds the following:

Vitreous china Front overflow hole Single hole, 4" or 8" faucet center Template supplied Faucet not included 483mm(W) x 483mm(D) x 204mm(H) 19"(W) x 19"(D) x 8"(H)

• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 • ADA Section 4.19

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CAILYN

ROUND DROP-IN SINK

4110BRW

Single Hole

4140BRW

4" Center

4180BRW

8" Center

Product Specs: · Vitreous china · Front overflow hole · Single hole, 4" or 8" faucet center · Template supplied · Faucet not included

Overall Dimensions: 483mm(W) x 483mm(D) x 204mm(H) 19"(W) x 19"(D) x 8"(H)

Colours To Be Specified: Colour:

Compliance Certifications:

Soft White

Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008

Notes:

· ADA Section 4.19

Shipping: Cube

1.27

20 lbs

This product is designed to comply with ADA requirements, if installed according to the standard. It is the responsibility of the installer to comply with this standard prior to installation.

483mm(19")

Single Hole, 102mm(4") or 204mm(8") 3 Holes 32mm(1¼")

260mm (10¼") Counter Top

182mm (7⅛")

318mm (12½")

204mm (8") Supplies As Required

1¼" O.D. Waste

44 mm (1¾") 64 mm (2½")

483mm(19")

204mm (8") Overflow Hole Note: Dimensions shown for location of supplied and waste are suggested.

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Curtis

4140BEW - 4" Center

Semi-Oval Drop-In Sink

Features

Compliance Certifications

• • • • • •

Meets or exceeds the following:

Vitreous china Front overflow hole 4" Faucet center Template supplied Faucet not included 528mm(W) x 432mm(D) x 190mm(H) 20¾"(W) x 17"(D) x 7½"(H)

• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 • ADA Section 4.19

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CURTIS

SEMI-OVAL DROP-IN SINK

4140BEW

4" Center

Product Specs: · Vitreous china · Front overflow hole · 4" Faucet center · Template supplied · Faucet not included

Overall Dimensions: 528mm(W) x 432mm(D) x 190mm(H) 20¾"(W) x 17"(D) x 7½"(H)

Compliance Certifications: Meets or exceeds the following:

Colours To Be Specified:

· IAPMO cUPC

Colour:

Soft White

· ASME A112.19.2 / CSA B45.1-2008 · ADA Section 4.19

Shipping: Cube

1.73

17 lbs

Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. This product is designed to comply with ADA requirements, if installed according to the standard. It is the responsibility of the installer to comply with this standard prior to installation.

528mm(20¾") 102mm (4")

3 Holes 32mm(1¼")

51mm (2") 216mm (8½")

260mm (10¼")

Counter top

318mm (12½")

204mm(8") Supplies As Required 1¼" O.D. Waste

44mm (1¾") 64mm (2½")

Counter Top Cut Out 495mm x 400mm (19½" x 15¾")

432mm(17") 150mm 190mm (5⅞") (7½")

Overflow Hole Note: Dimensions shown for location of supplies and waste are suggested. CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Connor 4210CFY

17" Oval Undermount Sink

Features

Compliance Certifications

• • • •

Meets or exceeds the following:

Vitreous china Front overflow hole Template and mounting hardware supplied Overall dimensions (W x D x H): (OD): 430mm(17") x 355mm(14") x 190mm(7½") (ID): 380mm(15") x 305mm(12") x 140mm(5½")

• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 Installed

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CONNOR

17" OVAL UNDERMOUNT SINK

4210CFY

Undermount Sink

Product Specs: · Vitreous china · Front overflow hole · Template and mounting hardware supplied

Overall Dimensions (W x D x H): (OD): 430mm(17") x 355mm(14") x 190mm(7½") (ID): 380mm(15") x 305mm(12") x 140mm(5½")

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008

Colours To Be Specified: Colour:

Shipping: Cube

1.11

16 lbs

Soft White

355mm(14")

13mm (½")

Detail of Mounting Clip Brass insert

Note: Dimensions shown for location of supplies and ″P″ trap are suggested.

Countertop

Sink

140mm (5½") 190mm (7½")

Clip Screw

430mm(17") 380mm(15") 64mm (2½") 355mm (14")

95mm (3¾") 70mm (2¾")

Counter Top

44mm (1¾")

45° 305mm (12")

430mm(17")

273mm (10¾") 327mm (12⅞")

Overflow Hole

204mm(8") Countertop Cut Out (Template Supplied)

Mounting Clips (4 Pieces)

1¼" O.D. Waste

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Supplies As Required

Revised: March 2013

Calvin 4220CFY

19¼" Oval Undermount Sink

Features

Compliance Certifications

• • • •

Meets or exceeds the following:

Vitreous china Front overflow hole Template and mounting hardware supplied Overall dimensions (W x D x H): (OD): 490mm(19¼") x 410mm(16⅛") x 195mm(7⅝") (ID): 430mm(17") x 350mm(13¾") x 145mm(5¾")

• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 Installed

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CALVIN

19¼" OVAL UNDERMOUNT SINK

4220CFY

Undermount Sink

Product Specs: · Vitreous china · Front overflow hole · Template and mounting hardware supplied

Overall Dimensions (W x D x H): (OD): 490mm(19¼") x 410mm(16⅛") x 195mm(7⅝") (ID): 430mm(17") x 350mm(13¾") x 145mm(5¾")

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008

Colours To Be Specified: Colour:

Shipping: Cube

1.53

19 lbs

Soft White

410mm(16⅛")

15mm (⅝")

Detail of Mounting Clip Brass insert

Note: Dimensions shown for location of supplies and ″P″ trap are suggested.

Countertop

Sink

145mm (5¾") 195mm (7⅝")

Clip Screw

490mm (19¼") 430mm(17")

64mm (2½") 410mm (16⅛")

100mm (4") 70mm (2¾")

44mm (1¾")

45° 350mm (13¾")

Counter Top 490mm(19¼")

273mm (10¾") 327mm (12⅞")

Overflow Hole

204mm(8") Countertop Cut Out (Template Supplied)

Mounting Clips (4 Pieces)

32mm(1¼") O.D. Waste

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Supplies As Required

Revised: March 2013

Camden 4210CHY

16" Square Undermount Sink

Features

Compliance Certifications

• • • •

Meets or exceeds the following:

Vitreous china Front overflow hole Template and mounting hardware supplied Overall dimensions (W x D x H): (OD): 406mm(16") x 406mm(16") x 190mm(7½") (ID): 345mm(13⅝") x 345mm(13⅝") x 140mm(5½")

• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 Installed

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CAMDEN

16" SQUARE UNDERMOUNT SINK

4210CHY

Undermount Sink

Product Specs: · Vitreous china · Front overflow hole · Template and mounting hardware supplied

Overall Dimensions (W x D x H): (OD): 406mm(16") x 406mm(16") x 190mm(7½") (ID): 345mm(13⅝") x 345mm(13⅝") x 140mm(5½")

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC Colours To Be Specified:

· ASME A112.19.2 / CSA B45.1-2008

Colour:

Shipping: Cube

1.43

24 lbs

Soft White

Detail of Mounting Clip Brass insert

Countertop

Sink

Note: Dimensions shown for location of supplies and ″P″ trap are suggested.

Clip Screw

406mm(16") 406mm(16")

345mm(13⅝")

30mm(1¼")

190mm (7½")

140mm (5½")

110mm (4⅜") 406mm (16")

12mm (½")

Counter Top 406mm(16")

65mm(2½") 44mm(1¾") 345mm (13⅝")

327mm (12⅞")

Overflow Hole 12mm x 50mm (½" x 2")

273mm (10¾") 204mm(8")

100mm (4")

Mounting Clips (4 Pieces) Counter Top Cut Out (Template Supplied)

1¼" O.D. Waste

Supplies As Required

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Catena 4210CIY

20" Rectangular Undermount Sink

Features

Compliance Certifications

• • • •

Meets or exceeds the following:

Vitreous china Front overflow hole Template and mounting hardware supplied Overall dimensions (W x D x H): (OD): 510mm(20") x 395mm(15½") x 190mm(7½") (ID): 450mm(17¾") x 335mm(13⅛") x 140mm(5½")

• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 Installed

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CATENA

20" RECTANGULAR UNDERMOUNT SINK

4210CIY

Undermount Sink

Product Specs: · Vitreous china · Front overflow hole · Template and mounting hardware supplied

Overall Dimensions (W x D x H): (OD): 510mm(20") x 395mm(15½") x 190mm(7½") (ID): 450mm(17¾") x 335mm(13⅛") x 140mm(5½")

Compliance Certifications: Meets or exceeds the following : · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008

Colours To Be Specified: Colour:

Shipping: Cube

1.72

27 lbs

Soft White

Detail of Mounting Clip Brass insert

Countertop

Sink

Note: Dimensions shown for location of supplies and ″P″ trap are suggested.

395mm(15½")

Clip Screw

190mm (7½")

12mm (½")

140mm (5½")

510mm(20") 450mm(17¾")

30mm(1⅛") Counter Top

110mm (4¼") 395mm (15½")

65mm(2½") 335mm (13⅛")

510mm(20")

44mm(1¾") 327mm (12⅞")

Overflow Hole 12mm x 50mm (½" x 2")

273mm (10¾")

204mm(8")

130mm (5⅛")

Mounting Clips (4 Pieces)

1¼" O.D Waste

Supplies As Required

Countertop Cut Out (Template Supplied)

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Collette 4220CIY

21½" Rectangular Undermount Sink

Features

Compliance Certifications

• • • •

Meets or exceeds the following:

Vitreous china Front overflow hole Template and mounting hardware supplied Overall dimensions (W x D x H): (OD): 545mm(21½") x 355mm(14") x 190mm(7½") (ID): 485mm(19") x 295mm(11⅝") x 140mm(5½")

• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 Installed

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

COLLETTE

21½" RECTANGULAR UNDERMOUNT SINK

4220CIY

Undermount Sink

Product Specs: · Vitreous china · Front overflow hole · Template and mounting hardware supplied

Overall Dimensions (W x D x H): (OD): 545mm(21½") x 355mm(14") x 190mm(7½") (ID): 485mm(19") x 295mm(11⅝") x 140mm(5½")

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008

Colours To Be Specified: Colour:

Shipping: Cube

1.64

25 lbs

Soft White

Detail of Mounting Clip Brass insert

Countertop

Sink

Note: Dimensions shown for location of supplies and ″P″ trap are suggested.

355mm(14")

Clip Screw

190mm (7½")

12mm (½")

140mm (5½")

545mm(21½") 485mm(19")

30mm(1⅛") Counter Top

110mm (4¼") 355mm (14")

65mm(2½") 295mm (11⅝")

545mm(21½")

44mm(1¾") 327mm (12⅞")

Overflow Hole 12mm x 50mm (½" x 2")

273mm (10¾")

204mm(8")

130mm (5⅛")

Mounting Clips (4 Pieces)

1¼" O.D Waste

Supplies As Required

Countertop Cut Out (Template Supplied)

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Caprice

4313DMX - Basin with Single Hole 4343DMX - Basin with 4" Center 4383DMX - Basin with 8" Center 4344DMX - Pedestal Leg

Pedestal Lavatory

Features

Compliance Certifications

• • • • • •

Meets or exceeds the following:

Vitreous china Rear overflow hole Single hole, 4" or 8" faucet center Supplied with mounting hardware Faucet not included 580mm(W) x 482mm(D) x 865mm(H) 22¾"(W) x 19"(D) x 34"(H)

• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008

Colours Available: Soft white / Bone / Biscuit

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CAPRICE

PEDESTAL LAVATORY

4313DMX

Basin with Single Hole

4343DMX

Basin with 4" Center

4383DMX

Basin with 8" Center

4344DMX

Pedestal Leg

Product Specs: · Vitreous china · Rear overflow hole · Single hole, 4" or 8" faucet center · Supplied with mounting hardware · Faucet not included

Overall Dimensions: Colours To Be Specified: 580mm(W) x 482mm(D) x 865mm(H)

Colour:

22¾"(W) x 19"(D) x 34"(H)

Soft White Bone (055) Biscuit (066)

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC

Notes:

· ASME A112.19.2 / CSA B45.1-2008

Shipping: Basin

2.36 cube 43 lbs (GW)

Leg

0.8 cube 24 lbs (GW) *67mm(2⅝")

32mm(1¼") Dia. 3 Holes

Finished Wall

Pedestal Anchor Screw Holes 2mm x 10mm (⅛" x ⅜") Dia.

Overflow Hole 64mm (2½")

44mm (1¾")

12mm x 20mm (½" x ⅞") Holes For Anchor

220mm (8⅝")

527mm(20¾") Single Hole, 102mm(4") or 204mm(8") Faucet Center

80mm (3⅛") 220mm (8⅝")

225mm (8⅞")

110mm (4⅜")

Supplies As Required

Back View 95mm (3¾")

865mm (34")

204mm (8")

1¼" O.D. Waste

482mm (19")

579mm (22¾")

535mm (21")

580mm(22¾") Note: Dimensions shown for location of supplies and waste are suggested. *Actual dimensions must be taken from fixture.

190mm(7½")

Finished Floor

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

190mm (7½")

Revised: March 2013

Carley

5343DMX - Basin with 4" Center 5383DMX - Basin with 8" Center 5344DMX - Pedestal Leg

Pedestal Lavatory

Features

Compliance Certifications

• • • • • •

Meets or exceeds the following:

Vitreous china Rear overflow hole 4" or 8" faucet center Supplied with mounting hardware Faucet not included 596mm(W) x 489mm(D) x 855mm(H) 23½"(W) x 19¼"(D) x 33⅝"(H)

• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008

Colours Available: Soft white / Bone / Biscuit

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CARLEY

PEDESTAL LAVATORY

5343DMX

Basin with 4" Center

5383DMX

Basin with 8" Center

5344DMX

Pedestal Leg

Product Specs: · Vitreous china · Rear overflow hole · 4" or 8" faucet center · Supplied with mounting hardware · Faucet not included

Overall Dimensions: 596mm(W) x 489mm(D) x 855mm(H) Colours To Be Specified:

23½"(W) x 19¼"(D) x 33⅝"(H)

Colour:

Compliance Certifications:

Soft White Bone (055) Biscuit (066)

Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 Notes:

Shipping: Basin

2.64 cube 30 lbs (GW)

Leg

0.89 cube 18 lbs (GW)

465mm(18⅜") 58mm (2¼")

410mm(16")

Finished Wall 205mm (8")

44mm(1¾")

489mm (19¼")

Note: Dimensions shown for location of supplies and waste are suggested.

855mm (33⅝")

204mm (8")

Supplies As Required

35mm (1¼")

115mm (4½")

170mm (6¾")

215mm (8½")

102mm(4") or 204mm(8") Faucet Center

64mm(2½")

Back View

596mm(23½")

691mm (27¼")

569mm (22⅜") 32mm (1¼") O.D. Waste

190mm(7½")

525mm (20⅝")

Finished Floor

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Cornell 4810BEX

Top Inlet Wall Mount Urinal

1.9Lpf / 0.5Gpf Wall Mount Urinal

4810BEY

Rear Inlet Wall Mount Urinal

Features

Compliance Certifications

• • • • • • • • • •

Meets or exceeds the following:

High efficiency urinal 1.9Lpf / 0.5Gpf Vitreous china Washout flush action Outlet spud with 1½" tubing tailpiece Flushing rim Mounting hardware supplied Integral strainer Flushometer not included 321mm(W) x 324mm(D) x 457mm(H) 12⅝"(W) x 12¾"(D) x 18"(H)

• • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 LEED Compliant

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CORNELL

1.9Lpf / 0.5 Gpf WALL MOUNT URINAL

4810BEX 4810BEY

Top Inlet Wall Mount Urinal Rear Inlet Wall Mount Urinal

Product Specs: · High efficiency urinal · 1.9Lpf / 0.5Gpf · Vitreous china · Washout flush action · Outlet spud with 1½" tubing tailpiece · Flushing rim · Mounting hardware supplied · Integral strainer · Flushometer not included

Overall Dimensions:

Colours To Be Specified: Colour:

321mm(W) x 324mm(D) x 457mm(H)

Soft White

12⅝"(W) x 12¾"(D) x 18"(H)

Compliance Certifications: Notes:

Meets or exceeds the following:

Flush Valve is not included and must be ordered separately. Provide suitable reinforcement for all wall supports. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

· IAPMO cUPC · US EPA WaterSense

Comply ADA Section 4.18 when installed per code.

Please note: In order to comply with WaterSense certification this urinal must be used with 1.9Lpf / 0.5Gpf WaterSense labeled flushometer.

121mm (4¾")

¾" S.P.S or ¾" C.W.T Supply To Flush Valve

· ASME A112.19.2 / CSA B45.1-2008 · LEED Compliant

292mm (11½")

Shipping: Cube

2.35

36 lbs

Finished Wall 321mm(12⅝") 170mm(6⅝") 61mm (2½")

66mm (2½")

¾" Spud Hangers

19mm (¾") Top Spud or Back Spud

103mm(4") 115mm (4½")

305mm (12") 324mm (12¾")

457mm (18")

292mm (11½")

Finished Floor

1½" O.D. Waste 32mm (1¼")

432mm (17") Max. 610mm(24") Optional To Finished Floor

180mm (7")

1½" O.D. Tailpiece

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Carlo 4810BHX

Top Inlet Wall Mount Urinal

1.9Lpf / 0.5Gpf Wall Mount Urinal

4810BHY

Rear Inlet Wall Mount Urinal

Features

Compliance Certifications

• • • • • • • • • • •

Meets or exceeds the following:

High efficiency urinal 1.9Lpf / 0.5Gpf Vitreous china Washout flush action Outlet connection threaded 2" inside NPTF Flushing rim Mounting hardware supplied Extended sides for privacy Integral trap Flushometer not included 465mm(W) x 350mm(D) x 685mm(H) 18¼"(W) x 13¾"(D) x 27"(H)

• • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 LEED Compliant

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CARLO

1.9Lpf / 0.5Gpf WALL MOUNT URINAL

4810BHX 4810BHY

Top Inlet Wall Mount Urinal Rear Inlet Wall Mount Urinal

Product Specs: · High efficiency urinal · 1.9Lpf / 0.5Gpf · Vitreous china · Washout flush action · Outlet connection threaded 2" inside NPTF · Flushing rim · Mounting hardware supplied · Extended sides for privacy · Integral trap · Flushometer not included Colours To Be Specified:

Overall Dimensions:

Colour:

Soft White

465mm(W) x 350mm(D) x 685mm(H) 18¼"(W) x 13¾"(D) x 27"(H)

Compliance Certifications:

Notes: Flush Valve is not included and must be ordered separately. Provide suitable reinforcement for all wall supports. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense

Comply ADA Section 4.18 when installed per code.

Please note: In order to comply with WaterSense certification this urinal must be used with 1.9Lpf / 0.5Gpf WaterSense labeled flushometer.

121mm (4¾")

· ASME A112.19.2 / CSA B45.1-2008 · LEED Compliant

Shipping: Cube

4.94

60 lbs

292mm (11½")

685mm (27")

¾" S.P.S or ¾" C.W.T Supply To Flush Valve

Finished Wall

445mm(17½") 19mm (¾") Spud

69mm (2¾")

2 Hangers

320mm(12½") 465mm(18¼")

440mm (17⅜")

8mm x 25mm (⅜" x ⅞") Slot 430mm (17")

350mm(13¾") 242mm(9½")

13mm(½")

110mm (4⅜") C/L of Outlet

Finished Floor

19mm (¾") Top Spud or Back Spud

102mm (4")

432mm (17") Max. 610mm(24") Optional 2" N.P.T Female Outlet Connection

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Carlton 4810BFX

Top Inlet Wall Mount Urinal

1.9Lpf / 0.5Gpf Wall Mount Urinal

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency urinal 1.9Lpf / 0.5Gpf Vitreous china Washout flush action ¾" Top inlet spud Outlet connection threaded 2" inside NPTF Flushing rim Mounting hardware supplied Extended sides for privacy Integral trap Flushometer not included 445mm(W) x 375mm(D) x 684mm(H) 17½"(W) x 14¾"(D) x 27"(H)

• • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 LEED Compliant

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CARLTON

1.9Lpf / 0.5Gpf WALL MOUNT URINAL

4810BFX

Top Inlet Wall Mount Urinal

Product Specs: · High efficiency urinal · 1.9Lpf / 0.5Gpf · Vitreous china · Washout flush action · ¾" Top inlet spud · Outlet connection threaded 2" inside NPTF · Flushing rim · Extended sides for privacy · Integral trap · Elongated 14¾" rim from finished wall · Flushometer not included Colours To Be Specified:

Overall Dimensions:

Colour:

Soft White

445mm(W) x 375mm(D) x 684mm(H) 17½"(W) x 14¾"(D) x 27"(H)

Compliance Certifications:

Notes:

· IAPMO cUPC

· US EPA WaterSense

Comply ADA Section 4.18 when installed per code.

Meets or exceeds the following:

Please note: In order to comply with WaterSense certification this urinal must be used with 1.9Lpf / 0.5Gpf WaterSense labeled flushometer.

121mm (4¾")

· ASME A112.19.2 / CSA B45.1-2008

¾" S.P.S. or ¾" C.W.T. Supply To Flush Valve

Finished Wall

· LEED Compliant 292mm 375mm(14¾") (11½") 19mm

Shipping: Cube

5.27

65 lbs

2 Hangers

(¾") Spud

257mm (10⅛")

445mm(17½")

684mm 485mm (27") (9¾")

Finished Floor

19mm (¾") Top Inlet Spud

8mm x 25mm (⅜" x ⅞") Slot

418mm (16½")

375mm (14¾")

200mm (7⅞")

102mm (4")

165mm (6½")

60mm (2½")

C/L of Outlet

13mm(½") 432mm(17") Max. 610mm(24") Optional 2" N.P.T Female Outlet Connection

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Canata 4810BMX

Top Inlet Wall Mount Urinal

1.9Lpf / 0.5Gpf Wall Mount Urinal

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency urinal 1.9Lpf / 0.5Gpf Vitreous china Siphon jet flush action ¾" Top inlet spud Outlet connection threaded 2" inside NPTF Flushing rim Integral trap Wall hanger included Elongated 13⅞" rim from finished wall Flushometer not included 365mm(W) x 351mm(D) x 542mm(H) 14⅜"(W) x 13⅞"(D) x 21⅜"(H)

• • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 LEED Compliant

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CANATA

1.9Lpf / 0.5Gpf WALL MOUNT URINAL

4810BMX

Top Inlet Wall Mount Urinal

Product Specs: · High efficiency urinal · 1.9Lpf / 0.5Gpf · Vitreous china · Siphon jet flush action · ¾" Top inlet spud · Outlet connection threaded 2" inside NPTF · Flushing rim · Integral trap · Wall hanger included · Elongated 13⅞" rim from finished wall · Flushometer not included Colours To Be Specified:

Overall Dimensions:

Colour:

Soft White

365mm(W) x 351mm(D) x 542mm(H) 14⅜"(W) x 13⅞"(D) x 21⅜"(H)

Compliance Certifications:

Notes:

· IAPMO cUPC

· US EPA WaterSense

Comply ADA Section 4.18 when installed per code.

Meets or exceeds the following:

Please note: In order to comply with WaterSense certification this urinal must be used with 1.9Lpf / 0.5Gpf WaterSense labeled flushometer.

121mm (4¾")

· ASME A112.19.2 / CSA B45.1-2008 · LEED Compliant

292mm (11½")

Shipping: Cube

3.14

33 lbs

¾" S.P.S. or ¾" C.W.T. Supply To Flush Valve

365mm(14⅜")

Finished Wall

57mm (2¼")

2 Hangers

19mm (¾") Top Inlet Spud

351mm (13⅞")

542mm (21⅜")

158mm (6¼")

Ø41mm (1⅝") 102mm (4")

Finished Floor

432mm (17") Max. 610mm(24") Optional 2" N.P.T Female Outlet Connection

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Colter 4762BEX

4.8Lpf / 1.28Gpf Elongated Flushometer Bowl

Top Inlet Flushometer Bowl

4762BEU

Rear Inlet Flushometer Bowl

TESTED

ÉPREUVE

800g (Top Inlet)

Features

Compliance Certifications

• • • • • • • • • • • •

Meets or exceeds the following:

High efficiency flushometer bowl 4.8Lpf / 1.28Gpf Will also function with 6Lpf / 1.6Gpf flushometer Elongated bowl Vitreous china 15⅛" Bowl height 10" (254mm) Rough-in 2" Fully glazed ball pass trapway Siphon jet flush action Water surface (270mm x 185mm) 10⅝" x 7¼" Flushometer not included 382mm(W) x 705mm(D) x 385mm(H) 15"(W) x 27¾"(D) x 15⅛"(H)

• • • • •

IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 MaP tested 800g (Top inlet) MaP tested 600g (Rear inlet) LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Commercial Elongated

(Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

COLTER

4.8Lpf / 1.28Gpf ELONGATED FLUSHOMETER BOWL 4762BEX 4762BEU

Top Inlet Flushometer Bowl Rear Inlet Flushometer Bowl

Product Specs: · High efficiency flushometer bowl · 4.8Lpf / 1.28Gpf · Will also function with 6Lpf / 1.6Gpf flushometer · Elongated bowl · Vitreous china · 15⅛" Bowl height · 10" (254mm) Rough-in · 2" Fully glazed ball pass trapway · Siphon jet flush action · Water surface (270mm x 185mm) 10⅝" x 7¼" · Toilet seat and flushometer not included

Colours To Be Specified: Colour:

Overall Dimensions:

Soft White

382mm(W) x 705mm(D) x 385mm(H) 15"(W) x 27¾"(D) x 15⅛"(H)

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC

38mm (1½") Top Spud or Back Spud

· ASME A112.19.2 / CSA B45.1-2008 · MaP tested 800g (Top Inlet)

382mm(15")

38mm (1½") Spud

705mm(27¾")

· MaP tested 600g (Rear Inlet) Please note: MaP testing was completed with Sloan Flushometer Valve Model: Royal 111-1.2

Finished Wall

· LEED Compliant

385mm (15⅛")

Shipping: Cube 4.17 GW

56 lbs

243mm(9½")

550mm(21⅝") Finished Floor 254mm(10") 470mm(18½") Ø15mm(⅝")

C/L of Outlet

140mm (5½") 38mm (1½") Spud CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Clay 4762BOX

4.8Lpf / 1.28Gpf Elongated Flushometer Bowl

Top Inlet Flushometer Bowl

4762BOU

Rear Inlet Flushometer Bowl

TESTED

ÉPREUVE

800g (Top Inlet)

Features

Compliance Certifications

• • • • • • • • • • •

Meets or exceeds the following:

High efficiency flushometer bowl 4.8Lpf / 1.28Gpf Will also function with 6Lpf / 1.6Gpf flushometer Elongated bowl Vitreous china 16⅝" Bowl height 10" (254mm) Rough-in 2" Fully glazed ball pass trapway Water surface (250mm x 170mm) 9⅞" x 6⅝" Flushometer not included 382mm(W) x 705mm(D) x 424mm(H) 15"(W) x 27¾"(D) x 16⅝"(H)

• • • • • •

IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 800g (Top inlet) MaP tested 500g (Rear inlet) LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Commercial Elongated (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

CLAY

4.8Lpf / 1.28Gpf ELONGATED FLUSHOMETER BOWL

4762BOX Top Inlet Flushometer Bowl 4762BOU Rear Inlet Flushometer Bowl Product Specs: · High efficiency flush valve bowl · 4.8Lpf / 1.28Gpf · Will also function with 6Lpf / 1.6Gpf flushometer · Elongated bowl · Vitreous china · 16⅝" Bowl height · 10" (254mm) Rough-in · 2" Fully glazed ball pass trapway · Siphon jet flush action · Water surface (250mm x 170mm) 9⅞" x 6⅝" · Toilet seat and flushometer not included Colours To Be Specified:

Overall Dimensions:

Colour:

Soft White

382mm(W) x 705mm(D) x 424mm(H) 15"(W) x 27¾"(D) x 16⅝"(H)

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008

Notes: This toilet is designed to rough-in at a minimum dimension of 254mm (10") from finished wall to C/L of outlet. Flush valve not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.

· ADA Guidelines & ANSI A117.1 · MaP tested 800g (Top Inlet) · MaP tested 500g (Rear Inlet)

382mm(15")

38mm (1½") Spud

38mm (1½") Top Spud or Back Spud

705mm(27¾")

Please note: MaP testing was completed with Sloan Flushometer Valve Model: Royal 111-1.2

· LEED Compliant

Finished Wall

424mm (16⅝")

Shipping: Cube 4.55 GW

50 lbs 243mm(9½")

Finished Floor

545mm(21½")

470mm(18½") 254mm(10")

15mm(⅝")

C/L of Outlet 140mm (5½")

38mm (1½") Spud

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Clark 4762CEX

4.8Lpf / 1.28Gpf Elongated Flushometer Bowl

Top Inlet Wall Hung Flushometer Bowl

4762CEU

Rear Inlet Wall Hung Flushometer Bowl

TESTED

ÉPREUVE

800g (Top Inlet)

Features

Compliance Certifications

• • • • • • • • • •

Meets or exceeds the following:

High efficiency flushometer bowl 4.8Lpf / 1.28Gpf Will also function with 6Lpf / 1.6Gpf flushometer Elongated bowl Vitreous china 2" Fully glazed ball pass trapway Siphon jet flush action Water surface (260mm x 220mm) 10¼" x 8⅝" Flushometer not included 390mm(W) x 650mm(D) x 335mm(H) 15⅜"(W) x 25½"(D) x 13⅛"(H)

• • • • • •

IAPMO cUPC ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 800g (Top inlet) MaP tested 500g (Rear inlet) LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Commercial Elongated

(Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

101

CLARK

4.8Lpf / 1.28Gpf ELONGATED WALL HUNG FLUSHOMETER BOWL 4762CEX Top Inlet Wall Hung Flushometer Bowl 4762CEU Rear Inlet Wall Hung Flushometer Bowl Product Specs: · High efficiency flushometer bowl · 4.8Lpf / 1.28Gpf · Will also function with 6Lpf / 1.6Gpf flushometer · Elongated bowl · Vitreous china · 2" Fully glazed ball pass trapway · Siphon jet flush action · Water surface (260mm x 220mm) 10¼" x 8⅝" · Toilet seat and flushometer not included Colours To Be Specified:

Overall Dimensions:

Colour:

Soft White

390mm(W) x 650mm(D) x 335mm(H) 15⅜"(W) x 25½"(D) x 13⅛"(H) Notes:

Compliance Certifications:

• Toilet models designed to meet ADA Accessibility Standard when top of seat at 432mm to 482mm (17" to 19") from finished floor. Flush valve not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. 38mm (1½")

Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1

390mm(15⅜")

· MaP tested 800g (Top Inlet)

38mm (1½") Spud

650mm (25½")

· MaP tested 500g (Rear Inlet) Please note: MaP testing was completed with Sloan Flushometer Valve Model: Royal 111-1.2

381mm (15") ● 432mm

· LEED Compliant

Top Spud or Back Spud

254mm (10")

335mm (13⅛")

Finished Wall

(17") Max. ADA Height

Shipping: Cube 3.79 GW

50 lbs Finished Floor Ø25mm (1")

230mm (9") 468mm(18½")

190mm (7½")

15mm(⅝")

Ø38mm(1½") Spud (4762CEU only)

140mm (5½") Ø57mm (2¼")

38mm (1½") Spud (4762CEX only)

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Cleo

5722BOY - Bowl 5721BOY - Unlined Tank

TESTED

3.8Lpf / 1Gpf 2pc 17" High Elongated Pressure Assist

ÉPREUVE

1000g

Features

Compliance Certifications

• High efficiency pressure assist toilet • 3.8Lpf / 1Gpf • Powerful and Quiet pressure assisted Sloan FLUSHMATE® Flush assures clean and complete removal of all waste • Elongated bowl • Vitreous china • 17" Bowl height • Chrome tank lever • 12" (305mm) Rough-in • 2" Fully glazed ball pass trapway • Siphon jet flush action • Water Surface (203mm x 165mm) 8" x 6½" • 447mm(W) x 716mm(D) x 799mm(H) 17⅝"(W) x 28⅛"(D) x 31½"(H)

Meets or exceeds the following: • • • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 1000g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Elongated (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

103

CLEO

3.8Lpf / 1Gpf 2PC 17" HIGH ELONGATED PRESSURE ASSIST 5722BOY

Bowl

5721BOY

Unlined Pressure Assist Tank

Product Specs: · High efficiency pressure assist toilet · 3.8Lpf / 1Gpf · Powerful and Quiet pressure assisted Sloan FLUSHMATE® Flush assures clean and complete removal of all waste · Elongated bowl · Vitreous china · 17" Bowl height · Chrome tank lever Colours To Be Specified:

· 12" (305mm) Rough-in

Colour:

· 2" Fully glazed ball pass trapway

Soft White

· Siphon jet flush action · Water surface (203mm x 165mm) 8" x 6½" · Toilet seat not included

Notes:

Overall Dimensions: 447mm(W) x 716mm(D) x 799mm(H) 17⅝"(W) x 28⅛"(D) x 31½"(H)

This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.

Compliance Certifications: Meets or exceeds the following:

10mm(⅜")

716mm(28⅛") 202mm(8")

· IAPMO cUPC

447mm(17⅝")

· US EPA WaterSense · ASME A112.19.2 / CSA B45.1 2008

C/L of Seat post holes 140mm(5½")

· ADA Guidelines & ANSI A117.1 · MaP tested 1000g

357mm (14")

· LEED Compliant

Finished Wall 470mm(18½")

Shipping: Tank

1.43 cube

356mm(14")

33 lbs (GW) Bowl

431mm (17")

4.59 cube 52 lbs (GW)

693mm(27¼")

799mm (31½")

262mm(10⅜")

547mm(21½") 305mm (12")

Finished Floor C/L of Outlet CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Chane

5722BMY - Bowl 5721BOY - Unlined Tank

TESTED

3.8Lpf / 1.0Gpf 2pc 17" High Elongated Rear Outlet Pressure Assist

ÉPREUVE

1000g

Features

Compliance Certifications

• High efficiency pressure assist toilet • 3.8Lpf / 1.0Gpf • Powerful and Quiet pressure assisted Sloan FLUSHMATE® Flush assures clean and complete removal of all waste • Elongated siphon jet action bowl • Vitreous china • 17" Bowl height • Chrome tank lever • Back outlet flange • 2" Fully glazed ball pass trapway • Water surface (295mm x 198mm) 11⅝" x 7⅞" • 447mm(W) x 755mm(D) x 800mm(H) 17½"(W) x 29¾"(D) x 31½"(H)

Meets or exceeds the following: • • • • • •

IAPMO cUPC US EPA WaterSense ASME A112.19.2 / CSA B45.1-2008 ADA Guidelines & ANSI A117.1 MaP tested 1000g LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Elongated (Not included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

105

CHANE

3.8Lpf / 1.0Gpf 2PC 17" HIGH ELONGATED REAR OUTLET PRESSURE ASSIST 5722BMY

Bowl

5721BOY

Unlined Pressure Assist Tank

Product Specs: · High efficiency pressure assist toilet · 3.8Lpf / 1.0Gpf · Powerful and Quiet pressure assisted Sloan FLUSHMATE® Flush assures clean and complete removal of all waste · Elongated siphon jet action bowl · Vitreous china · 17" Bowl height · Chrome tank lever · Back outlet flange Colours To Be Specified:

· 2" Fully glazed ball pass trapway

Colour:

· Water surface (295mm x 198mm) 11⅝" x 7⅞"

Soft White

· Toilet seat not included

Overall Dimensions: Notes: This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

447mm(W) x 755mm(D) x 800mm(H) 17½"(W) x 29¾"(D) x 31½"(H)

Compliance Certifications:

Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.

Meets or exceeds the following: · IAPMO cUPC · US EPA WaterSense · ASME A112.19.2 / CSA B45.1-2008

Finished Wall

· ADA Guidelines & ANSI A117.1 · MaP tested 1000g

755mm(29¾") 447mm(17½")

· LEED Compliant

209mm (9⅞")

Shipping: Tank

1.43 cube / 33 lbs (GW)

Bowl

5.13 cube / 60 lbs (GW)

C/L of Seat Post Holes 140mm(5½")

357mm (14⅛")

470mm(18½")

375mm(14⅞")

755mm(29¾") 375mm(14⅞")

Back View Ø82mm (3¼")

800mm (31½")

Ø65mm (2⅝")

430mm (17")

22*12mm (⅞"*½")

108mm (4¼") 150mm (5⅞") 232mm(9¼")

232mm(9¼")

638mm(25⅛") Finished Floor

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Caledon 4760BKT - Lined Tank / Bowl

6Lpf / 1.6Gpf 2pc Kindergarten

Features

Compliance Certifications

• • • • • • • • • • •

Meets or exceeds the following:

Low consumption toilet 6Lpf / 1.6Gpf Vitreous china 11" Bowl height Soft white tank lever 10" (254mm) Rough-in 2" Fully glazed ball pass trapway Siphon jet flush action Plastic toilet seat included Water surface (235mm x 210mm) 9¼" x 8¼" 432mm(W) x 617mm(D) x 671mm(H) 17"(W) x 24¼"(D) x 26⅜"(H)

• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 • LEED Compliant

Colours Available: Soft white Shape of Toilet Seat: Kindergarten (Included)

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

107

CALEDON

6Lpf / 1.6Gpf 2PC KINDERGARTEN

4760BKT

Lined Tank

Product Specs: · Low consumption toilet · 6Lpf / 1.6Gpf · Vitreous china · 11" Bowl height · Soft white tank lever · 10" (254mm) Rough-in · 2" Fully glazed ball pass trapway · Siphon jet flush action · Water surface (235mm x 210mm) 9¼" x 8¼" · Plastic toilet seat included Colours To Be Specified:

Overall Dimensions:

Colour:

Soft White

432mm(W) x 617mm(D) x 671mm(H) 17"(W) x 24¼"(D) x 26⅜"(H)

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1 2008

Notes: This toilet is designed to rough-in at a minimum dimension of 254mm (10") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

· LEED Compliant

Shipping: Cube

4.3

72 lbs

10mm(⅜") 617mm(24¼") 203mm(8")

432mm(17")

C/L of Seat post holes 140mm (5½")

380mm (15")

Finished wall

380mm(15")

343mm(13½") 671mm (26⅜")

575mm(22⅝") 280mm (11")

440mm(17⅜")

217mm(8½")

Finished floor

254mm (10") C/L of Outlet

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Chelsea 4610BHW - Single Hole 4640BHW - 4" Center 4680BHW - 8" Center

Wall Mount Sink

Features

Compliance Certifications

• • • • •

Meets or exceeds the following:

Vitreous china Front overflow hole Single hole, 4" or 8" faucet center Mounting hardware supplied Optional metal support leg (Supplied by others) • Faucet not included • 485mm(W) x 440mm(D) x 215mm(H) 19⅛"(W) x 17⅜"(D) x 8½"(H)

• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 • ADA Guidelines & ANSI A117.1

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

109

CHELSEA

WALL MOUNT SINK

4610BHW

Single Hole

4640BHW

4" Center

4680BHW

8" Center

Product Specs: · Vitreous china · Front overflow hole · Single hole, 4" or 8" faucet center · Mounting hardware supplied · Optional metal support legs (Supplied by others) · Faucet not included

Overall Dimensions: 485mm(W) x 440mm(D) x 215mm(H) 19⅛"(W) x 17⅜"(D) x 8½"(H)

Colours To Be Specified: Colour:

Compliance Certifications:

Soft White

Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008

· ADA Guidelines & ANSI A117.1

Shipping: Cube

1.88

26.5 lbs

Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.

Dimensions shown for location of Supplies and “P” Trap are suggested. Provide reinforcement for wall supports. *Actual dimensions must be taken from fixture.

Anchor Screw Hole x 2

485mm(19⅛") Single hole, 102mm(4") or 204mm(8")

70mm 60mm (2¾") (2⅜")

Ø 32mm(1¼")

Ø 44mm(1¾")

216mm (8½")

64mm(2½") Ø

133mm (5¼") 105mm (4⅛") 107mm (6¾") 440mm (17⅜")

18mm(¾")

Overflow Hole

787mm (31") Min 869mm (34") Max.

6x Bracket Anchor Hole (8mm Dia.)

204mm(8")

Supplies As Required Drain Plug Outlet 1¼" O.D. Waste

Mounting Bracket Access Holes For Metal Stands (x6)

84mm (3¼")

215mm (8½") 235mm (9¼") 279mm (11")

756mm (29¾") Min 781mm (30¾") Max.

Finished Floor

CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Cassidy 4313DGX - Single Hole 4343DGX - 4" Center 4383DGX - 8" Center

Semi-Recessed Sink

Features

Compliance Certifications

• • • •

Meets or exceeds the following:

• • • •

Vitreous china Rear overflow hole Single hole, 4" or 8" faucet center Mounting screws and cut-out template supplied 8" Front overhang Wall secured lavatory for countertop or vanity installation Faucet not included 614mm(W) x 512mm(D) x 180mm(H) 24⅛"(W) x 20⅛"(D) x 7"(H)

• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 • ADA Guidelines & ANSI A117.1

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

111

CASSIDY

SEMI-RECESSED SINK

4313DGX

Single Hole

4343DGX

4" Center

4383DGX

8" Center

Product Specs: · Vitreous china · Rear overflow hole · Single hole, 4" or 8" faucet center · Mounting screws and cut-out template supplied · 8" Front overhang · Wall secured lavatory for countertop or vanity installation · Faucet not included

Overall Dimensions:

Colours To Be Specified: Colour:

614mm(W) x 512mm(D) x 180mm(H)

Soft White

24⅛"(W) x 20⅛"(D) x 7"(H)

Compliance Certifications: Notes:

Meets or exceeds the following:

· IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1

Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.

Shipping: Cube

2.32

44 lbs 614mm(24⅛") Single hole, 102mm(4") or 204mm(8")

205mm (8")

512mm(20⅛")

Finshed Wall

62mm(2½")

32mm(1¼") x 3 Holes

64mm(2½")

44mm(1¾")

220mm (8⅝")

170mm (6⅝")

864mm(34") Max. ADA Height

180mm (7")

685mm(27") Min. ADA Height

Finshed Floor CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Carmin 4610BHZ - Single Hole 4640BHZ - 4" Center 4680BHZ - 8" Center

Wall Mount Sink with Ledge

Features

Compliance Certifications

• • • • •

Meets or exceeds the following:

Vitreous china Rear overflow hole Single hole, 4" or 8" faucet center Mounting bracket and hardware supplied For concealed arm carrier installation (fits Zurn Z1231-EZ, Z1231-EZR, Z1253, Z1254 arm carriers) • Back splash ledge • Faucet not included • 510mm(W) x 467mm(D) x 262mm(H) 20"(W) x 18⅜"(D) x 10⅜"(H)

• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 • ADA Guidelines & ANSI A117.1

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

113

CARMIN

WALL MOUNT SINK WITH LEDGE 4610BHZ 4640BHZ

Single Hole 4" Center

4680BHZ

8" Center

Product Specs: · Vitreous china · Rear overflow hole · Single hole, 4" or 8" faucet center · Mounting bracket and hardware supplied · For concealed arm carrier installation (fits Zurn Z1231-EZ, Z1231-EZR, Z1253, Z1254 arm carriers) · Back splash ledge · Faucet not included

Overall Dimensions: 510mm(W) x 467mm(D) x 262mm(H) Colours To Be Specified:

20"(W) x 18⅜"(D) x 10⅜"(H)

Colour:

Soft White

Compliance Certifications: Meets or exceeds the following: · IAPMO cUPC

Notes:

· ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1

Shipping: Cube

2.87

38 lbs

Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.

Finshed Wall

510mm(20") 467mm(18⅜")

Single hole, 102mm(4") or 204mm(8")

205mm (8")

102mm (4")

212mm (8⅞") 160mm(6¼")

64mm(2½")

262mm (10⅜")

193mm (7⅝")

32mm(1¼") x 3 Holes

44mm(1¾")

160mm(6¼")

864mm(34") Max. ADA Height Ø27mm(1") x 6 Floor Stand Holes

685mm (27") Min. ADA Height

416mm(16⅜") Finshed Floor Back View

110mm (4⅜")

x2 Carrier Arm Holes Ø60mm(2⅜") 410mm(16⅛") CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

Revised: March 2013

Clayton 4610CHZ - Single Hole 4640CHZ - 4" Center 4680CHZ - 8" Center 4644CHZ - Shroud

Wall Mount Sink with Shroud

Features

Compliance Certifications

• • • • •

Meets or exceeds the following:

Vitreous china Rear overflow hole Single hole, 4" or 8" faucet center Mounting bracket and hardware supplied For concealed arm carrier installation (fits Zurn Z1231-EZ, Z1231-EZR, Z1253, Z1254 arm carriers) • Faucet not included • 520mm(W) x 585mm(D) x 543mm(H) 20½"(W) x 23"(D) x 21⅜"(H)

• IAPMO cUPC • ASME A112.19.2 / CSA B45.1-2008 • ADA Guidelines & ANSI A117.1

Colours Available: Soft white

www.contrac.ca The images shown are a representation of the finish and color, and may not reflect every characteristic possible.

115

CLAYTON

WALL MOUNT SINK WITH SHROUD

4610CHZ 4640CHZ

Single Hole 4" Center

4680CHZ

8" Center

4644CHZ

Shroud

Overall Dimensions: Colours To Be Specified:

520mm(W) x 585mm(D) x 543mm(H)

Colour:

20½"(W) x 23"(D) x 21⅜"(H)

Soft White

Compliance Certifications: Meets or exceeds the following:

Important: This sink is designed to comply with ADA ANSI A117.1 and OBC barrier-free standard when installed in accordance with this measurement. Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

· IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1

265mm(10½")

Shipping (Sink): 420mm(16½")

Cube

2.93

49 lbs

8mm(⅜")

155mm (6⅛")

390mm x2 Carrier Arm Holes Ø59mm(2⅜") (15⅜")

Shroud

Back View

Shipping (Shroud): Cube

1.48

21 lbs

370mm (14½")

10mm(⅜") 432mm(17")

520mm(20½")

585mm(23")

Single hole, 102mm(4") or 204mm(8")

205mm(8")

90mm(3½")

80mm(3⅛") 222mm(8¾")

208mm (8⅛")

32mm(1¼")

760mm 735mm (29") Min.

140mm(5½") 64mm(2½") 44mm(1¾")

315mm (12⅜")

840mm (33") Max. 695mm 685mm (27") Min.

Finished Wall

Ø25mm(1") x 6 Floor Stand Holes 280mm(11")

543mm (21⅜")

Finished Floor

420mm(16½") CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551 www.contrac.ca

295mm(3⅛") 230mm (9") Min.

Revised: March 2013

息 Copyright Contrac速 2013. All rights reserved. This catalogue contains information on a variety of our vitreous china products distributed by Contrac速. While the information contained in this catalogue was believed to be accurate at the time of printing, it is not guaranteed to be so, and it is subject to change. Please contact a Contrac速 customer service representative should you require in-depth information on a product or its application.

1.888.256.7551

www.contrac.ca

5970 Chedworth Way, Unit A, Mississauga, Ontario, Canada L5R 3V5 www.contrac.ca