newPRODUCTS

 JLG AE1932 AllElectric Davinci Series Scissor Lift

The AE1932 from JLG is an all-electric scissor lift in the Davinci Series with with zero emissions, resulting in clean, quiet operation.

Features include:

• Powered by lithium-ion battery

• 19-foot platform height and 32 inches wide

• Platform capacity of 600 pounds, both indoors and outdoors

• Compliant to A92.20 standards

• Travels two times faster than a standard scissor lift

• Each wheel is controlled independently for reduced tire wear and limits damage to sensitive flooring

• Conducts self-diagnostics and allows systems tests from mobile phones

• Comes standard with QuikFold rails and JLG Mobile Control https://rnt.news/jbu1yn

 Stellar NXT52 Hooklift

Stellar’s NXT52 Hooklift, a 52,000-pound capacity hoist, is a lightweight unit capable of loading, unloading and dumping various truck bodies. The hooklift features a Z-channel base design and universal body latching system. This system has outside locks that can be moved by loosening the clamp bolts, repositioning and bolting back down. This feature allows the operator to position the body locks in specific locations to accommodate body locks that may not be in the correct spot. The versatility of this system eliminates the need to cut locks off, reweld or repaint.

https://rnt.news/me3k5d

 Makita GCU04Z Chainsaw

Makita’s 40V max XGT Brushless 18-inch Chainsaw (GCU04Z) for landscaping, land clearing, forestry and trimming applications features zero emissions, low noise and less maintenance. The chainsaw is powered by one 40V XGT 5.0-Ah battery and features a Makita-built brushless motor. This tool is equivalent to a 42-cc gas chainsaw. The GCU04Z has an 18-inch guide bar and Makita-built motor with a variable-speed trigger that delivers 0 to 5,020 fpm for powerful cutting speed. It has zero emissions and reduced maintenance: There’s no engine oil to change, no spark plug to replace and no air filter or muffler to clean. And, there’s no need to drain the fuel for storage.

https://rnt.news/6k3069

 Atlas Copco B-Air 185-12 Portable Screw Air Compressor

The B-Air 185-12 by Atlas Copco features five to 12 bars of pressure, a stable flow rate of 5.4 to 3.7 m3/min and 55-kWh battery storage capacity. It’s independent of the need for fuel or a local power source to plug into and has the capability to perform for up to a full typical work shift. In turn, it provides portability for those working on sites where regular access to electricity is not practical. It only needs to be serviced every 2,000 hours.

https://rnt.news/haubx0

 Milwaukee Tool PACKOUT Modular Storage System Solutions

Milwaukee Tool added eight new shop-focused solutions to the Packout system, all featuring modularity with the Packout Wall Plates. The new solutions include the following: Magnetic Rack, Magnetic Bin and Large Magnetic Bin, Compact Wall Basket, 4-inch Single Straight Hook and Seven-Hook Rack, Belt Clip Rack and Long Handle Tool Holder. With the addition of the new Packout Shop Storage solutions, the Milwaukee Packout Modular Storage System now has more than 75 solutions for users to choose from to fully customize their storage on the jobsite, in transit and in the shop, making Packout a versatile and durable modular storage system.

https://rnt.news/otx2eq

 Metabo HPT 18V Cordless Narrow Crown Stapler

This brushless stapler is compact and lightweight at 4.4 pounds, enabling the tool to fit in tight spaces and facilitate work on overhead applications. It can drive two staples per second with zero ramp up. This product features Metabo HPT’s Air Spring Drive Technology for installing soffit panels, setting underlayment or aluminum flashing, assembling cabinets and tackling various trim work. Drive up to 1,000 0.25-inch crown staples per charge with the included 18-volt 2.0-Ah battery featuring a fuel gauge. It accepts 0.5-inch to 1.5-inch 18-gauge narrow crown staples.

https://rnt.news/f8uqqn

 Magni RTH 6.30

The Magni RTH 6.30 Rotating Telehandler is designed for lifting, elevated operations and transport on construction sites. This machine offers a maximum lift height of 98 feet, with a maximum lift capacity of 13,200 pounds and a maximum lift height capacity of 5,500 pounds. Powered by a Volvo TAD572VE Tier 4 Final engine, the 6.30 offers four-wheel drive for stable operation in rugged work areas. The four-cylinder, diesel engine delivers 218 hp. This telehandler can travel at a maximum speed of 25 mph. The 6.30 offers the same dynamic features as all Magni models, including 360-degree rotation. Over 100 attachments provide users with several machines in one, including a telescopic forklift, rough-terrain crane and aerial work platform.

https://rnt.news/dhiq1d

 Earthwave’s FleetWatcher Anti-Theft Features

FleetWatcher, a telematics platform from Earthwave Technologies, now includes features to prevent theft and aid in equipment recovery. The platform’s GPS technology allows users to see where any piece of equipment is at any given time, while an included proactive unauthorized use feature alerts users if equipment is started after hours. This proactive feature gives users a heads up that the equipment was started when it shouldn’t have been and allows users to alert the police. In addition, a breadcrumb feature shows the machine’s location activity in real time and every minute if the machine is being towed. The information is available from a browser or a mobile device.

https://rnt.news/d7mz73

 IronCraft Redesigned Forestry Disc Mulcher

IronCraft redesigned its Forestry Disc Mulcher, which is capable of eradicating 6-inch to 14-inch diameter materials and standing or felled trees. A 60-inch fully machined disc includes 44 beaver teeth located on the top, bottom and perimeter of the disc, with five additional beaver teeth located on the inside of the deck for mulching capacity. An angled throat design guides material into the mulching chamber to support the shredding of brush. This mulcher is available with either a 150-cc motor that requires 32 to 44 gpm of hydraulic flow or a 200-cc motor that requires 45 to 60 gpm of hydraulic flow. All models feature a 1-inch hinged deflector and 0.375-inch-thick deck with reinforced sides.

https://rnt.news/3p5icw

 Mecalac Multifunctional Compact Loader Line

Mecalac’s line of compact loaders is comprised of six models, including the MCL2, MCL4, MCL4+, MCL6, MCL6+ and MCL8. The series offers performance for industries including agriculture, landscape, forestry, snow removal, utility and construction. The M-Drive and speed control features allow the loader to function as a tool carrier, providing control of RPM by hand throttle and speed via a foot pedal. This enables controlled operation of a wide variety of hydraulic attachments. Each MCL in the series has an option for auxiliary hydraulic lines on the boom and at the rear of the machine, as well as 12-volt three-pole plugs, allowing for the ability to use hydraulic attachments on either end of the machine. The MCL series maximizes attachment possibilities with 7.9 gpm flow on the MCL2 and MCL4 models and 15.9 gpm flow on the MCL6 and MCL8 models. Each machine has a 45-degree articulation that keeps the front wheels traveling in the same path as the rear wheels while driving. A 10-degree oscillation allows a stong follow up and maximum traction wherever the machine might travel, including on uneven ground. Each machine in the MCL series offers transportability between jobsites with low transport weight, which ranges between 3,836 pounds and 6,283 pounds. https://rnt.news/pqdbfw

 Western Global Fuel Tank Accessory Packages

Western Global offers a range of accessories for its FuelCube and TransCube Global Fuel Tanks. Available plug-andplay fuel storage accessories include pumps, hoses and specialized accessories such as fire extinguishers, trailers and solar panels. Pump kit assembly packages include basic pumps, hoses and nozzles and deluxe options that include filter kits, hose swivels and digital meters. Western Global takes remote jobsites into account with remote power battery kits available for 12-volt pumps to operate where there is limited or no power. Operations can also customize their fuel delivery hoses with options, including soft-walled and arctic delivery hoses ranging from 12 feet to 50 feet, in addition to 50-foot marine hoses. Additional options include high-quality hoses with quick couplers for feed and return applications.

https://rnt.news/98556n

ALR’S and BIG STICKS CHISEL SCALERS