Equipment Today March 2024

Helping you optimize ROI on your construction equipment

MARCH 2024

EQUIPMENT SHOWCASE

#1 Market Leaders

With great power comes great big subdivisions.

Construction Lineup

Durable Kubota engines

Upgraded tech & features

When it absolutely has to be done right, turn to the equipment that’s built for it. The Kubota construction lineup. Reliable, comfortable track loaders.

Productivity-boosting skid steers. Powerful wheel loaders. Heavy-duty utility vehicles.* All built around dependable Kubota engines and ready to take on big jobs. Kubota is the world’s #1 selling compact excavator for 19 years.**

KubotaUSA.com *RTV-X utility vehicle not pictured. **According to 2022 data from Off-Highway Research including all Kubota Group brand sales. © Kubota Tractor Corporation, 2024. This material is for descriptive purposes only. Kubota disclaims all representations and warranties, express or implied, or any liability from the use of this material. For complete warranty, safety and product information, consult your local Kubota dealer. For the complete disclaimer, go to KubotaUSA.com/disclaimers and see the posted disclaimer.

Contents

www.forconstructionpros.com/equipment

March 2024 | Vol. 60 No. 3

2024 ANNUAL EQUIPMENT SHOWCASE

CATEGORIES 8

EARTHMOVING TRENDS

20

ATTACHMENTS

24

LIFT EQUIPMENT

28

WORKSITE EQUIPMENT

8

Published and copyrighted 2024 by IRONMARKETS. Equipment Today makes every effort to report manufacturers’ product news accurately, but is not responsible for validity of news claims.

All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording or any information storage or retrieval system, without written permission from the publisher.

WEB EXCLUSIVES VIDEO NETWORK

https://eqtoday.co/k2p285

DIGGING DEEPER PODCAST

34

FLEET MANAGEMENT

www.ForConstructionPros.com/Equipment

https://eqtoday.co/s7sfkm

PREMIUM CONTENT

https://eqtoday.co/9pd73s

SUBSCRIPTION POLICY: Individual subscriptions are available without charge in the U.S. and Canada to management, engineering, supervisory, equipment maintenance and other personnel who have buying influence in the construction equipment industry. Subscribe online at www.ForConstructionPros.com. Publisher reserves the right to reject non-qualified subscribers.

One year subscription to non-qualified individuals: U.S. $50; Canada/ Mexico $70; all other countries $100 (payable in U.S. funds, drawn on U.S. bank). Single copies available (prepaid only) $10 each (U.S., Canada & Mexico), $15 each (International). For change of address or subscription information call (847) 559-7598 or fax (847) 291-4816.

Equipment Today (USPS 369-290, ISSN 0891-141X) is published is published 11x with issues of January, February, March, April/May, June, July, August, September, October, November and December

by IRONMARKETS, 201 N. Main St. Ste 350, Fort Atkinson, WI 53538.

Periodicals postage paid at Fort Atkinson, WI, and additional entry offices. POSTMASTER: Please send change of address to Equipment Today, PO Box 3605, Northbrook, IL 60065-3605. Printed in the USA.

March 2024 | EQUIPMENT TODAY

3

CATEGORIES

DEPARTMENTS 6

39

TECHNOLOGY

43

TRUCKS & TRANSPORTATION

46

ROADBUILDING

20

BREAKING GROUND

2024 Equipment Showcase

39

8

43

28

Brought to You By:

UNSURE ABOUT YOUR NEXT BIG PURCHASE? IRONPROS has what you need: NEW PRODUCT PAGES Bringing you through a funnel of research, insight and comparison.

HOW IT WORKS? Provides the Right Questions to Ask Description of the Product & Use Cases Pros and Cons of Renting vs. Buying Applicable Add-Ons

Scan Here!

BETWEEN A

GIRDER AND A HARD PLACE IS WHERE YOU DO YOUR

BEST WORK.

Inspired by the challenges you face from foundation to finishing work, JLG is dedicated to developing the innovative solutions that deliver the productivity and safety you demand to leave your mark on the skyline of tomorrow today.

L E AV E Y O U R M A R K W I T H J L G . C O M

2024 THE EQUIPMENT ARA SHOWCASE SHOW BREAKING GROUND

Lori Ditoro Editor-in-Chief Equipment Today lditoro@iron.markets

&

THE

®

EDITORIAL

Editor-in-Chief........................................................................ Lori Ditoro lditoro@iron.markets

Managing Editor......................................................................Gigi Wood gwood@iron.markets

Senior Editor, Equipment & Workwear, IRONPROS.......................................................Michael Cheng mcheng@iron.markets

Junior Editor.................................................................... Merina Shriver mshriver@iron.markets

AUDIENCE

Audience Development Manager.....................................Angela Franks

PRODUCTION

Senior Production Manager................................................ Cindy Rusch crusch@iron.markets

Art Director...................................................................Kimberly Fleming kfleming@iron.markets

ADVERTISING/SALES

Brand Director.................................................................... Sean Dunphy sdunphy@iron.markets

Brand Manager, OEM & Construction................................Nikki Lawson nlawson@iron.markets

Sales Representative.......................................................... Kris Flitcroft kflitcroft@iron.markets

Sales Representative....................................................... Patty Maroder pmaroder@iron.markets

Sales Representative...................................................Megan Perleberg mperleberg@iron.markets

IRONMARKETS

Chief Executive Officer...........................................................Ron Spink Chief Financial Officer....................................................................... JoAnn Breuchel Chief Revenue Officer.......................................................................... Amy Schwandt Corporate Director of Sales.....................................................................Jason DeSarle Brand Director, Construction, OEM & IRONPROS.....................Sean Dunphy VP, Audience Development.................................................................Ronda Hughes VP, Operations & IT.....................................................................................Nick Raether Content Director........................................................................................Marina Mayer Director, Online & Marketing Services............................Bethany Chambers Content Marketing, Marketing Services............................... Jess Lombardo Director, Demand Generation & Education..................................... Jim Bagan

CIRCULATION & SUBSCRIPTIONS PO Box 3605 Northbrook, IL 60065-3605, Phone: (877) 201-3915 Fax: (847) 291-4816 circ.EquipmentToday@omeda.com

LIST RENTAL Sean Dunphy

The team at the John Deere booth focused on earthmoving equipment.

L

ast month, I attended my first American Rental Association (ARA) Show, held in New Orleans. Among many trends noticed was a focus on the operator focus, listening to the customer and equipment flexibility. When colleagues shared that the show was a “buying show,” I wasn’t sure what to expect.

Attendees and exhibitors signing contracts in the booth wasn’t the first thing I thought I’d see, but I saw that and more.

Because it is a selling show, SANY had dealers in the booth to help customers and make sales. At the time that we talked with the SANY team, they already had two dozen quotes. In the booth, the team featured equipment popular to the rental market, and 99% of the machines were available on dealers’ lots.

6

EQUIPMENT TODAY | March 2024

At the John Deere booth, the focus was mainly on earthmoving equipment. What excited the team most was being back at the show and feeling that energy was back.

One machine featured was the 85-P Excavator, which is popular in the rental market. SANY, John Deere and many others indicated that design factors and changes to equipment were made after listening to the needs of their customers.

Annual Equipment Showcase As we do every year, we are excited to feature some exciting, new equipment and tools that were launched recently.

Each section in the Annual Equipment Showcase focuses on assets in the following categories: ˜ Earthmoving equipment ˜ Attachments

Sean Dunphy

The SANY team had dealers at their booth to help customers with purchases.

˜ Lift equipment ˜ Worksite equipment ˜ Fleet management ˜ Trucks and transportation ˜ Roadbuilding machines ˜ Technology

While you look through this issue, we ask that you take note of the advertising companies because, without their support of the print magazine, our website and newsletters, we could not bring you all the informative content that we do each day. We are grateful to you, our readers, and to our partners for their support of our publication.

As always, let us know what you want us to cover and what is most important to you. Thanks for being a valued reader of Equipment Today.

www.ForConstructionPros.com/Equipment

Sr. Account Manager........................................ Bart Piccirillo, Data Axle 402-836-2768 | bart.piccirillo@data-axle.com

REPRINTS & LICENSING

Brand Manager, OEM & Construction................................Nikki Lawson nlawson@iron.markets

E @EquipmentToday D @EquipmentToday C @equipment-today-magazine-official Q @equipmenttoday Published by IRONMARKETS 201 N. Main Street, Ste 350, Fort Atkinson, WI 53538 (800) 538-5544 www.IRON.MARKETS www.ForConstructionPros.com/equipment www.IronPros.com

IT’S MORE THAN A FOUNDATION.

IT’S THE START OF SOMETHING EPIC. IT’S YOUR LIFE’S WORK. IT’S YOUR BUSINESS, BUILT FROM THE GROUND UP. AND WE DIG IT. BOBCAT’S HERE FOR EVERY IMPOSSIBILIT Y MADE POSSIBLE. Bobcat Company is a member of the Doosan Group. Doosan is a global leader in construction, grounds maintenance and material handling equipment, power and water solutions, and engineering that has proudly served customers and communities for more than a century.

Bobcat ®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries. ©2024 Bobcat Company. All rights reserved. | 1623

EARTHMOVING Products

Read More at eqtoday.co/earthmovingtrends

Hyundai HT100V Compact Track Loader

The HT Series model features a Tier 4 Final-compliant Hyundai engine that provides power while meeting emissions standards. The compact track loader is powered by a Hyundai HTI4 four-cycle, turbocharged, electronically controlled diesel engine.

The new engine, designed and manufactured by Hyundai, meets Tier 4 Final and EU Stage V emissions standards and deliver 70 net hp (52 kW) at 2,200 rpm. The Hyundai HT100V has a rated operating capacity of 2,300 lbs. (1,220 kg) and its heaped bucket capacity is 0.58-yd.3 (0.44 m3).

Standard features include a multifunction joystick enabling operators to control all machine functions with their hands only; a vertical lift path that allows the boom to raise the bucket straight up to full height, less spillage and lift height, and two-speed travel enabling movement around the jobsite.

Takeuchi TB350R Excavator

Takeuchi has expanded its TB300 Series excavator product line with the new TB350R short tail swing compact excavator, the first short tail swing model in the manufacturer’s 5-ton class. The TB350R has a rear swing overhang of just 2.95-in., helping minimize rear-swing impacts. The TB350R weighs 10,980 lbs. in canopy configuration and 11,235 lbs. when equipped with a cab.

It is powered by a Kubota V2607-CRE5B diesel engine that is U.S. EPA Tier 4 Final compliant and delivers 41.7 net hp (ISO 9249 and SAE1349) and more than 130.2 ft.-lbs. of torque.

A four-pump hydraulic system delivers smooth, harmonized control of the work equipment. The TB350R provides a bucket breakout force of 10,431 lbs., a traction force of 12,320 lbs. and a maximum dig depth of 11 ft., 8.8 in.

CASE CX15EV, CX25EV Mini Excavators

CASE Construction Equipment launched two electrified mini excavators and a new diesel-powered mini excavator and more to come.

Anchoring the new mini excavator launch for CASE is the all-new electrified machines, the CX15EV and the CX25EV. The CX15EV is a 3,186-lb. mini excavator powered by a 21-hp/16-kW electric motor.

The CX25EV is a 4,828-lb. mini excavator with a 27-hp/20-kW electric motor.

The lithium-ion battery featured in both machines is charged either by the 110-V/220-V on-board charger, or with an external rapid charger. CASE also launched a new diesel-powered, true zero tailswing mini excavator: the CX42D. This is the first model of the new CASE D Series and complements the existing C Series product line, giving CASE a broader reach into core weight classes that are in high industry demand.

Kubota SVL75-3 CTL

Kubota’s new SVL75-3 is powered by a 74.3-hp Kubota engine and features a rated operating capacity of 2,490 lbs. at 35% or 3,557 lbs. at 50%. The machine generates 6,191 lbs. of breakout force and has a hinge pin height of 122.7 in.

The SVL75-3’s hydraulic system is equipped with an Advanced Multifunction Valve that helps with the movement of all hydraulic functions when operated simultaneously, allowing operators to run the auxiliary hydraulics, bucket and loader arm functions at the same time.

Travel features include two-speed travel and the Advanced Auto Downshift system from Kubota compact excavators that automatically downshifts from high to low gear while making turns, providing the maximum amount of torque needed when exiting a turn.

Operators also have the ability to change their travel response sensitivity with the choice of three track response settings: mild, normal and quick.

KATO IC100-5 Crawler Carrier

Japanese-made and U.S. customized and distributed, the IC100-5 is versatile and powerful, designed for a wide range of construction applications. It features a 268hp Cummins diesel engine to power through heavy-duty tasks, and a joystick for smooth operation and easy maneuverability in tight spaces.

This 12-ton machine has a high-capacity payload of 22,000 lbs. and a low center of gravity. It is only 102 in. wide, which means it doesn’t require a wide-load permit.

This crawler carrier also comes with an optional hydraulic winch. The IC100-5 is designed with both operator safety and comfort in mind. It features a spacious cab and ergonomic controls, which provides maximum visibility and ease-of-use for the operator.

The carrier is also equipped with a number of safety features, including multiple camera angles and a ROPS-compliant cabin.

Mecalac AX1000 Articulated Loader

Mecalac’s AX1000 articulated loader features a monoboom, a single boom that offers rigidity and strength, resisting the twisting that can occur with the traditional two-arm setup.

Combining large, tinted windows with the monoboom design, the AX1000 eliminates the two loader arms obstructing the operator’s view and allows clear visibility to the left and right in addition to straight ahead. This machine has a standard bucket volume of 1.3 cu. yd. (1 cubic meter) plus a 75-hp engine. The machine has a lift capacity of 9,038 lbs.

(4,100 kg). Further, the AX1000 maintains lifting power from the ground to its highest point.

8

EQUIPMENT TODAY | March 2024

Link-Belt 750 X4 Excavator

Greater digging power and increased lift capacities are the result of the Spool Stroke Control system, which reduces pressure loss and distributes hydraulic oil more smoothly. Pilot pressure sensors detect the type of work being done, such as digging or leveling and then relays that data to proportional solenoid valves that quickly determine where optimal hydraulic pressures should be directed for that operation.

Two electronically controlled Kawasaki variable-displacement axial-piston pumps and one Kawasaki gear pump assure that hydraulic power is delivered precisely when and where it’s needed. At the same time, hydraulic flows in noncritical areas of the system are reduced.

The result is better breakout force, more lifting strength and faster machine response. The X4 Series features PA-certified Final Tier 4 engines from Isuzu with a balance between power, productivity and fuel efficiency.

www.ForConstructionPros.com/Equipment

Liebherr Mid-Sized Wheel Loaders

The three models, L 526, L 538 and L 546, in the latest Generation 8 have bucket sizes between 2.2 m³ and 3.0 m³ in the standard version and are characterized by an increase in performance compared to the previous generation.

The new L 526 has around 20% more engine power and more than 20% higher breakout forces than its predecessor.

The newly-designed lift arm ensures maximum breakout, holding and lowering forces. It has optimized z-bar kinematics and improved working hydraulics.

Increases in engine power and tipping loads prepare the wheel loaders for demanding operations in different sectors, such as excavation, recycling or log handling.

Available in Europe, the L 538 and L 546 models also have performance increases in various areas: for example, with the optimized travel drive, providing increased traction to ensure that the new wheel loaders accelerate dynamically in everyday work, and can penetrate powerfully into all materials.

E A RT H MO V I N G Bobcat S7X All-Electric Skid-Steer Loader

Hyundai HL985A Wheel Loader

KATO 9V5 Mini Excavator

Kato’s 9V5 Mini Excavator is an ultramini, zero tail swing excavator. It is a much faster and easier alternative to any shovel or wheelbarrow for working in tight spaces. With its ultra-small size and roll-down ROPS, the 9V5 can fit through doorways and standard yard gates and squeeze into tight spaces, making it ideal for any project.

For professionals who need more stability, the standard equipment includes expandable tracks to help them power through their job with stability and ease.

The 9V5 features high operator comfort thanks to low vibration and noise, improved interface with a digital hour counter, and improved machine stability with better weight distribution and a larger front blade.

This mini excavator is also economical with its low fuel consumption and easy maintenance, and is highly reliable thanks to an optimized design and low endothermic engine rotation speed.

As the largest model in Hyundai’s A series wheel loader product line, the new Hyundai HL985A wheel loader offers a standard bucket capacity of 9.1 yd.3 (7.0 m3) for use in high-production jobs, such as quarrying, aggregates and other mass-volume material handling applications.

The Hyundai HL985A wheel loader is powered by a 430-hp (320-kW) Cummins X12 Performance Series engine, delivering power and torque, while meeting Tier 4 Final and Stage 5 emission standards. Heavyduty ZF axles with wet outboard brakes and with coolers are standard equipment on the HL985, which is powered by a ZF 5-speed transmission.

The Hyundai HL985A offers a range of standard features. For example, Smart Power Mode adjusts the engine speed in heavy-duty applications. This can help balance traction and breakout forces. Hyundai’s Eco Gauge function enables the operator to monitor fuel consumption in real time or to review historical data. Displayed values include engine torque, fuel efficiency, as well as average and total fuel consumed. Hourly and daily fuel consumption are also viewable through the menu.

The Bobcat S7X is the an all-electric skid-steer loader. Powered by a lithium-ion battery, the loader emits zero emissions, giving operators the flexibility to work in new places, including environmentally sensitive jobsites, in noise-restricted areas and even indoors.

To create the all-electric S7X, Bobcat eliminated all hydraulics, instead using electric drive motors and ball screw actuators for lift and tilt functions. By eliminating the hydraulics, the S7X has 50% fewer components, simpler components and 96% less fluids and lubricants than its diesel-equivalent counterpart.

The powerful loader promotes both sustainability and increased performance. Together, the battery and electric powertrain generate incredible performance characteristics, with instantaneous torque that is as much as three times greater than traditional loaders. The S7X offers operators a smooth and comfortable experience with minimal vibration and quiet operation.

This improves comfort, reduces fatigue and enhances the user’s experience.

Even with the major powertrain differences, the S7X provides a familiar environment for Bobcat equipment operators thanks to the controls and instrumentation which are consistent with the traditional compact loader lineup.

Introduced in concept format in early 2023, Bobcat plans to commercialize the S7X at a later date.

Ditch Witch AT120 Directional Drill

The AT120 features 15,500 ft.-lbs. of rotational torque and 3,000 ft.lbs. of inner rotational torque, a 50% increase over the AT100. With 120,000 lbs. of thrust and pullback, the AT120 allows operators to take on a variety of projects as well as move through longer bores and larger diameter installations more

efficiently.

The drill is powered by a 280-hp Cummins Stage V diesel engine that meets European emission standards for cleaner jobsites. Built to boost jobsite uptime, the AT120 offers a 20-ft. end-to-end drill pipe on board, helping operators put more pipe in the ground.

CASE Utility Plus Backhoe Loader

The all-new CASE Utility Plus backhoe delivers full-sized backhoe performance in an efficient platform that’s easy to use. With contractors facing more diverse jobsite needs and more difficulties finding skilled operators, CASE developed this versatile loader to reduce owning and operating costs and minimize learning curves.

Designed for applications ranging from agriculture and landscaping to general construction and utility work, CASE Utility Plus offers rental companies and contractors a business-smart machine that’s extremely easy to service and that almost any contractor can use.

The 74-hp CASE Utility Plus backhoe features a big cab with excellent sightlines to all work areas, a maintenance-free emissions system (no DPF and no DEF) and easy controls— including a choice of mechanical controls for more experienced operators or pilot controls for rental businesses and contractors with less experienced operators.

This new CASE backhoe allows businesses focus on simplicity while also providing options like Extendahoe and powerful attachment performance via one-way auxiliary hydraulics on the dipper. It’s built to be versatile, allowing equipment owners to build up from a simple base model to achieve a machine that’s right for their business.

John Deere 85 P-Tier Excavator

EQUIPMENT TODAY | March 2024

Compact and nimble, the TW60 Series 2 is well-equipped to handle a wide range of jobs and attachments.

A universal hydraulic skid steer coupler enables the TW60 Series 2 to use a wide range of skid steer attachments, and it is easily controlled from the operator’s station.

The quiet and turbocharged engine is equipped with a DOC/DPF exhaust aftertreatment system and produces 61 hp (45.6 kW) for excellent power and performance around the job site.

The 100% locking differentials can be engaged at low speeds allowing the operator to work in varied terrain and extreme conditions. Daily maintenance and inspections are simple to perform on the TW60 Series 2 because the engine hood opens overhead providing access to key inspection points and grease points that are easily accessed on the loader and articulation points.

Wacker Neuson ST27 Compact Track Loader

The new 85 P-Tier boasts an 18% engine horsepower increase and the addition of a turbo for high altitude performance, compared to the 85 G-Tier model it is replacing. Hydraulic performance improvements include increased pump torque and improved dig forces.

The larger, redesigned cab is equipped with an 8-in. monitor, Bluetooth and a 270-degree camera system integrated into the main monitor. Improved service access and optional features, angle blade with float and continuous flow auxiliary hydraulics, round out the updates that improve the performance and versatility of the 85 P-Tier Excavator.

10

Takeuchi TW60 Compact Wheel Loader

Weighing in at 7,350 lbs., this machine is easily towable and with a rated operating capacity of 1,890 lbs. (at 35% of tip), the ST27 comes with a 74-hp Kohler KDI 2504 turbocharged engine.

The compact design, measuring 60 in. wide and under 80 in. in height, offers reach at a dump height of 36.5 in. The ST27 offers a hinge pin height of 120 in. and dump height of 94.3 in.

It features a two-speed standard travel drive that offers a 9.1 mph speed resulting in faster cycle times. There is a standard auto-shifting two-speed drive system that can be active or disabled. It automatically senses the operator’s need to shift. The auto feature engages in and out of the two speeds based on joystick input and eliminates the need for manual shifts.

www.ForConstructionPros.com/Equipment

All it takes for the challenges you face.

From the original compaction brand comes a full line of construction equipment designed to help you get the job done with efficiency, quality and comfort. Whether your challenge is to load, move or place material, compact soil and asphalt, or to provide light, heat, power or pumping on your job site, Wacker Neuson has the machines to get it done right. This includes zero-emission, battery-powered solutions to meet the demands of the construction environment today, as well as tomorrow.

Contact your local Wacker Neuson dealer today.

www.wackerneuson.com

E A RT H MO V I N G

John Deere 335 P-Tier Compact Track Loader

Volvo EC500 Crawler Excavator

John Deere’s new generation of large frame 335 P-tier compact track loaders are for hauling, surface grading, material loading and equipment transportation on construction sites. The construction vehicles in the P-tier series feature redesigned cabs, heated and vented seats, touchscreen displays, hands-free Bluetooth, and JDLink telematics.

The new generation machines can also be equipped with optional surround view capabilities. The 335 P-tier and 334 P-tier are optimized for customers who require more horsepower and hydraulic flow from a compact machine.

With 118 gross hp in addition to pressure compensated load sensing hydraulics, the vehicles can be used to support demanding applications in rugged work areas.

Volvo CE’s EC500 excavator is a new 50-ton crawler excavator for tough applications.

It’s a partner for the Volvo A25G to A35G hauler and a successor to the Volvo EC480E. A notable change can be seen in the cabin design and styling with a new layout and features including highdefinition copilot screen, keyless engine start, wired and wireless smart phone charging and new work mode switch.

This next generation excavator is set up to access a range of machine options to help operators complete their tasks. These include the operator coaching app, Volvo Dig Assist, designed to eliminate the need to manually mark out a site, and Volvo Lift Assist, all accessed via the Co-Pilot screen in the cab.

AUSA D151AEG Electric Dumper

AUSA launched the D151AEG electric dumper, which can be paired with a miniexcavator. The D151AEG, which has a 3,300-lb. and 1.18-cu.-yd. payload on its swing skip, allows operators to offload earth, rubble or other materials at an angle using a joystick.

Because of its compact size, this machine is designed for work in tight spaces. The D151AEG dumper is equipped with a li-ion battery.

In the case of this dumper, it features a pack with a 9.3-kWh capacity, enough for at least one full day of work. Its 7.6-kW batteries and peaks of up to 17.3 kW are managed electronically to offer power and all-terrain capabilities.

Bobcat E40 Compact Excavator

Bobcat expanded its lineup of compact excavators to include the E40. As part of the lineup expansion, Bobcat has also revised the model numbers for its 3-ton to 5-ton excavator lineup to align with the industry’s size class.

It is a minimal tail swing excavator, with less than 2 in. of overhang and a standard long arm. The E40 delivers an over-the-blade lift capacity and over-the-side lift capacity for demanding jobs on construction sites.

With the introduction of the new E40, Bobcat has revised select model numbers in its 3-ton to 5-ton excavators’ size class to better reflect the machines’ size and performance within the industry.

WE KEEP AMERICA ON TRACK

EQUIPMENT TODAY | March 2024

Designed for demanding tasks, the DEVELON DX140W-7 wheel excavator delivers powerful digging and maneuverability when working on bridges and roadways or in urban areas. The machine has a balance of power, along with intelligent controls and smart machine functionality. It can be configured with a front dozer blade and independent rear outriggers or four independent outriggers.

In-cab features include automotivestyle heating and air conditioning, wide floorspace and visibility from the cab.

A rearview camera is standard and an optional heated or cooled seat is available.

The standard DEVELON Fleet Management system monitors the excavator’s health and maintenance schedule to help keep it running at operating performance.

ASV VT-100 & VT-100 Forestry CTLs

The new VT-100 compact track loader is a vertical lift machine for loading and grading applications in landscaping and construction.

The VT-100 Forestry is designed for mulching, right-of-way clearance, site prep and more. The models include visibility and performance features. ASV’s VT-100 and VT-100 Forestry come equipped with a 103.5-hp Tier 4 Final Yanmar diesel engine and standard 40-gpm high flow. The loaders’ large line sizes, hydraulic coolers and direct-drive pumps transfer flow and pressure directly to the attachment and reduce power loss.

The VT-100 features a 3,500-lb. rated operating capacity and 10,286-lb. tipping load while the VT-100 Forestry includes a 3,700-lb. rated operating capacity and a 10,571-lb. tipping load. The models feature ASV’s patented Posi-Track rubber track suspension. The dual-level suspension of the VT-100 and VT-100 Forestry features suspended wheels and axles, allowing it to manage different terrain.

The suspended wheels and flexible track conform to the ground, promoting ground contact and traction.

Find a dealer near you at MOROOKACARRIERS.COM

12

DEVELON DX140W-7

Yanmar V7/V7-HW Wheel Loaders

Yanmar recently launched the V7 and V7-HW (heavy weight) wheel loaders. With a total height of less than 2.5 m, a width of 1,850 mm (with bucket) and an overall length of just 5,238 mm, the V7/V7-HW can fit inside a standard container keeping it under the 4-m height limit dictated by the EU’s Weights and Dimensions’ Directive of 1996.

The all-wheel drive V7/V7-HW have an electronically controlled drivetrain and a top speed of 20 km/h; with 30-km/h max speed as an option. Unlike other models in the Yanmar CE range, the new V7/V7-HW do away with exterior oscillation and instead feature a joint that combines articulation with oscillation, enabling the height of the machine to be lowered.

The units are also a half-ton lighter than the next largest machines in the Yanmar CE range (weighing 4,250 kg and 4,450 kg, respectively), enabling customers to conduct landscaping on soft surfaces.

E A RT H MO V I N G

Barreto 825TKL Mini Skid-Steer

Narrow enough to fit through fence gates but hearty enough to tackle tough jobs, the Barreto 825TKL Mini Skid-Steer features a first cab-over design in its class and is quickly earning its keep in rental stores nationwide.

Developed specifically for industry professionals, the 825TKL is fitted with a universal attachment plate and standard high- and low-flow attachment capabilities.

The cab-over feature enables mechanics to perform in-depth maintenance and repairs by completely opening the machine— like cracking an egg—to access protected internal components like hydraulic motors and pumps. This revolutionary design pays for itself by making for happy mechanics and saving countless hours in the shop.

Replacing filters, checking or changing fluids, and other routine maintenance tasks are easily accessible by lifting the hood. The innovative track design prevents de-tracking in the field by using a one-of-a-kind track shape and tensioning system.

In addition to the spring tensioner, it features a secondary hydraulic tensioning system that maintains the correct tension in both forward and reverse. It’s a nimble, quick and comfortable ride that is ready for snow, rain, mud and years of hard work on the jobsite.

CASE Backhoe Loaders

CASE recently launched five new backhoe loader models. Already available are the CASE Utility Plus and the CASE 580SV Construction King center pivot. Three models will hit CASE dealers at a later date: the CASE 580SV Construction King side shift, and two CASE 695SV Construction King models.

The CASE Utility Plus delivers fullsized backhoe is a 74-hp machine that delivers a large cab with sightlines to all areas, ease of service with a maintenancefree emissions system, and easy controls.

Mechanical controls are offered for more experienced operators who like that traditional backhoe feel, while pilot controls are available for rental businesses and contractors with less-experienced operators.

The all-new CASE 580SV Construction King brings a tool carrier-style front end, designed for businesses that use the loader end of their backhoe as a primary material handler. Adding a 4-in-1 bucket, a 6-in-1 bucket or any of the attachments available for CASE backhoes turns this into a robust multipurpose jobsite solution—and a hydraulic quick coupler makes it easy.

Caterpillar 988 GC Wheel Loader

The new Cat 988 GC Wheel Loader delivers reliable operation, allowing customers to move material and large loads on the jobsite. The new loader offers up to 5% less fuel consumption and up to 15% lower maintenance costs than the Cat 988K. Designed to maximize life-cycle value in moderate production applications up to 2,000 hrs. per year, the 988 GC is capable of delivering production within 6% of the 988K in truck loading applications. This wheel loader is optimized as a 45-tonne (50-ton) truck match loader.

Its 3,909-mm (12.8-ft.) dump clearance delivers loading up to the Cat 775G truck.

With a bucket payload matched to the 988K, the new 988 GC offers up to 670 tonnes/hour (740 tons/hour) performance in shot rock truck loading applications and up to 527 tonnes/hour (581 tons/hour) for load-andcarry operations.

New Holland C330 Compact Track Loader

Hitachi ZAXIS-5N Compact Excavators

Hitachi ZAXIS-5N compact excavators range from 1.7 metric tons to 6 metric tons (1.10 U.S. tons to 6.61 U.S. tons) that feature either a short-tail swing radius (U) or ultra-short-tail swing radius with swing boom (USB). ZAXIS5N compact excavators are commonly used as tool carriers with a wide range of attachments.

Standard auxiliary hydraulic lines have been pre-plumbed to the end of the boom on the ZX17U-5N and to the middle of the arm on the ZX26U-5N to ZX60USB-5N. A standard wedgelock quick coupler simplifies attachment hookup.

A factory-installed bracket for a thumb cylinder simplifies thumb installation. The operator can match the flow rate of the auxiliary hydraulic circuit to the requirements of the attachment being used with either a low or high setting.

New Holland Construction released the C330 Super Boom Vertical Lift Compact Track Loader in North America. Equipped with a 66-in. working width and a 67-hp engine, the C330 is designed with integrated elements such as low shoulder positioning and towers, supporting operator visibility and jobsite safety.

The C330 vertical lift compact track loader features heavy load-carrying capacity to handle the transportation of substantial materials such as rocks, stone and timber. Leveraging electrohydraulic (E-H) control, the machine can navigate through tight residential spaces to pass through backyard gates and maneuver with ease between buildings. Featuring E-H controls, operators can transition between ISO and H-pattern, granting them full control over drive functions and attachments.

VOTLEQ SKY 1000 Electric Mini Skid Steer Loader

The VOTLEQ SKY 1000 Electric Mini Skid Steer Loader can be used for material handling, transfer or lifting on construction sites. Equipped with rubber tracks, the SKY 1000 is powered by a 14.34kW lithium-ion battery.

The mini skid steer loader features a breakout force of 1,798 lbs. and a lifting force of 2,473 lbs. It can travel at a continuous speed of 2.8 mph forward and 2.5 mph reverse. Made in the U.S., this machine is compatible with more than 15 attachments, including hydraulic and electric solutions, for added versatility.

Operators can access several telematics capabilities, including GSM, GPS, speedometer and inclinometer.

March 2024 | EQUIPMENT TODAY

13

E A RT H MO V I N G Caterpillar 432 Backhoe Loader

American Augers DD600

Horizontal directional drill (HDD) operators can meet different new jobsite requirements with the new DD600 maxirig directional drill from American Augers. Replacing American Auger’s DD440T, the DD600 was designed with customer-focused features for power and performance in HDD maxi rigs. The new DD600 features a 755-hp Stage V/T4F/T3 CAT C18 engine that does not require DEF. Additionally, the 755-hp engine allows for high demand loads without challenging the engine capacity. The Stage V engine classification meets emission standards for engines in Europe. The drill offers reliable performance while maintaining a small, mobile footprint on the jobsite.

The weight of the DD600 meets standard transportation requirements, meaning no special permits are required to transport the machine. The DD600 can also be transported without removing the wrenches. This machine has a hydraulic catwalk to expedite the time required to set up and teardown.

CASE Electric CX25EV & CX42D Excavators

CASE announced a new lineup of subcompact equipment, including a new stand-on mini track loader, two new small articulated loaders from the new sevenmodel line, a range of attachments and new additions to the CASE mini excavator lineup, including an EV option and a zerotail swing model.

The all-new stand-on mini track loader TL100 brings several capabilities to teams in the field. Designed to power a range of attachments and with a rated operating capacity of 1,000 lbs., the TL100 can handle the work of multiple laborers on jobs like digging, earthmoving, setting fence posts, grappling brush and grading.

The new electric model provides a low noise, zero-emission solution for indoor and outdoor environments, while the SL12TR delivers an extra-long reach for loading trucks or moving material in hardto-reach places.

When it comes to attachments, CASE small articulated loaders offer versatility, with more than 110 CASE attachments already available. CASE’s two new mini excavator models, the fully electric CX25EV and the CX42D, deliver responsive controls and an operator-first design.

The Caterpillar 432 side shift backhoe loader is designed for moving materials, digging and filling on construction sites. This 92-hp machine is powered by a C3.6 electronic turbo Intercooled engine and is equipped with an all-wheel drive configuration, enabling stable performance on rugged terrain.

Under the hood, flow-sharing valves help manage oil flow across various functions of the backhoe loader. A four-speed powershift transmission comes as standard on the 432.

Operation is facilitated by the directional control lever, rather thana floor-mounted lever, to shift gears. The six-speed, automatic shift transmission is available as an option.

Heavy-duty axles and a 100% locking rear differential come as standard on Cat backhoe loaders.

The axles provide durability while providing traction on uneven surfaces. No daily greasing is required on the front axle.

Yanmar Next-gen ViO80-7 & SV100-7 Mini Excavators

Yanmar’s ViO80-7 and SV1007 feature improvements to hydraulics, cab design and maintenance. The models are the largest in Yanmar’s mini excavator line.

The 18,122-lb. ViO80-7 features 18% more power over its predecessor with its new 67-hp Yanmar Tier 4 Final diesel engine.

The 21,385-lb. SV100-7 includes a 72-hp Yanmar Tier 4 Final diesel engine. Both machines provide operators with attachment performance with 20% more PTO flow rate.

The ViO80-7 achieves a maximum dig depth of 14 ft., 3 in., while the SV100-7 can reach 14 ft., 11 in. The upgraded cab in each includes a new suspension seat, more foot space, ergonomic foot pedals and a wider cabin.

John Deere 510 P-Tier Excavator

Coming in at 51-metric tons, the 510 P-Tier is a replacement of the current 470 P-Tier model.

Including a variable undercarriage and the ability to handle buckets 5 yards and above, this new model delivers performance and capability, while specifically targeting customer enhancements in operating costs and reliability.

Using a more efficient powertrain, including the integration of E-fans, this new model provides customers with up to 25% lower maintenance costs, 15% lower repair costs and 20% lower fuel consumption. This machine is designed to deliver performance to customers in mass excavation or deep underground applications while providing significant improvement in the cost of ownership.

Komatsu GD955-7 Motor Grader

Komatsu introduced the new GD955-7 motor grader to the North American market. The GD955-7 provides operators with the ability to build and maintain haul roads for truck fleets of 100 tons and up.

This new machine generates blade downforce pressure for grading performance. With faster working travel speeds compared to the previous model, Komatsu engineered the GD955-7 to increase grading performance and help reduce maintenance requirements.

Horsepower is 426 hp at 1,900 rpm (313 kW at 1,900 rpm). The operating weight is 104,323 lbs. (47,320 kg). The moldboard is 18 ft. (5.5 m) standard. A 20-ft. (6.1-m) moldboard is optional. Despite its large size, the GD955-7 offers maneuverability on the jobsite. It can execute tight U-turns on a standard 100-ton class haul road without the need to fully cut the wheel or course.

Vermeer VX75 Vacuum Excavator

Vermeer introduced the first model of its next generation trailer vacuum excavators, the Vermeer VX75. The 75-hp vacuum excavator is equipped with a 1,500-cfm (42.5-m3/min) vacuum blower capable of generating 15 inHg (381 mmHg) of suction force.

It is available with a 5-in. (12.7-cm) hydraulic boom option for standard units and a 4-in. (10.2-cm) hydraulic boom option for air and jetter versions. The VX75 is designed for challenging utility work, including potholing, horizontal directional drilling, slurry management and microtrenching dust containment.

The VX75 vacuum excavator’s control panel and full-function remote control allow operators to start and stop the machine and control components from the boom to the water system and spoil tank. This remote-control feature is useful for contractors using the excavator for slurry management because they no longer have to manually restart the unit when draining a pit.

14

EQUIPMENT TODAY | March 2024

DEVELON DD130 Dozer

The new mid-size 145.8-hp DD130 dozer is designed to do grading, leveling, site preparation and land clearing. Functionality is driven by the dozer’s six-way power-tilt angle blade.

Operators can minimize the number of passes on each job by lifting, tilting and angling the six-way power-tilt angle blade to move dirt or other materials where they need to go. A two-way mechanical adjustment also allows operators to adjust the blade pitch from 52 degrees to 58 degrees to control how steeply it bites into the ground.

The DD130 comes standard with the oscillating serrated track system, which maintains consistent, stable ground contact for grading performance. The oscillating serrated track system follows the terrain and enables blade control. Also available is a blade float function for back grading.

The dozer blade moves up and down following the contours of the ground. A blade shake button helps operators remove materials stuck to the blade without leaving the cab.

www.ForConstructionPros.com/Equipment

BOBCAT.COM

BIG DIG?

NO SWEAT. If you have the will to turn the earth upside down in pursuit of success, we have the machine that can do it and then some: R2-Series compact excavators from Bobcat.

Bobcat Company is a member of the Doosan Group. Doosan is a global leader in construction, grounds maintenance and material handling equipment, power and water solutions, and engineering that has proudly served customers and communities for more than a century.

Bobcat®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries. ©2023 Bobcat Company. All rights reserved. | 1545

E A RT H MO V I N G JCB 3CX & 4CX Platinum Edition

The Platinum Edition models highlight the company’s 70 years of innovation in manufacturing backhoe loaders. A total of 70 limited-edition 70th birthday 3CX PRO and 4CX PRO machines will be manufactured.

The Platinum Edition models will have servo excavator controls, Powerslide, air conditioning and bidirectional auxiliary flow hydraulics. The machines will also have limited edition platinum decals and grill badge and platinum-colored wheels.

The cab will have an embroidered graphic in the carpet and upgraded seat material with 70th anniversary branding, along with a steering wheel center cap featuring the 70th logo. Each machine will also have a special plaque and customers will receive a special platinum gift pack with the backhoe loader.

Vermeer VXT600 Vacuum Excavator

Vermeer redesigned the VXT600 vacuum excavator. The load capacity has been increased for road use and new features are available on the machine.

With a 12-yd.3 (9.2-m3) elongated spoil tank design and 1,200-gal. (4,542.5-l) freshwater tank capacity, the Vermeer VXT600 vacuum truck weighs in at just 40,000 lbs. (18,143 kg). This new design allows for even weight distribution when traveling while maximizing the volume of material hauled.

It also has a low profile with a height (with boom) of 12.25 ft. (3.7 m) so that it can maneuver under trees, power lines and bridges. The VXT600 is a powerful digging machine that operates quietly while on the job. It features a vacuum system that is powered by a 6,400-cfm (181.2-m3/m) Helical tri-lobe Jurop blower.

With a 23-ft. (7-m) boom, an 8-in. (20.3-cm) diameter dig hose, a vacuum level of 27 inHg (0.91 bar) and a water pump that produces 10 gpm (37.9 lpm) of flow at 3,000 psi (206.8 bar), the VXT600 can be used for heavy digging operations. Additionally, the boom dig hose can be stowed with the dig tube attached to minimize setup time between digs.

Kubota KX080-5 Excavator

Kubota announced the launch of the KX080-5 compact excavator for construction sites. Replacing the KX080-4 with performance, utility and upgrades, the KX080-5 serves as a new addition in Kubota’s excavator lineup.

Equipped with a 66.6-hp (SAE J1995 gross) Kubota engine, the KX080-5 features a digging depth of 15 ft., 1.1 in., a maximum dumping height of 17 ft., 2.7 in. and a bucket breakout force of 14,660 lbs. The two-pump, load-sensing system supports the use of attachments, letting operators perform simultaneous tasks. The auto-shift system enables automatic travel shift from high to low depending on traction effort and terrain, providing simultaneous operations when dozing and turning.

A superior track engineered for the extreme

CRT-800 Rubber Tracks All Season

KIOTI HX Series

The HX9010C and HX1151C models feature a KIOTI engine and a heavyduty front axle for power and dependability when taking on tough jobs. The HX9010C and HX1151C feature a KIOTI 4-cyl. diesel engine, delivering 90 hp and 115 hp, respectively.

This makes the HX Series the most powerful in KIOTI’s lineup.

This engine package delivers power and torque during use. As with the rest of the tractor lineup, KIOTI builds almost every major component themselves, and the HX Series tractors are no exception. This allows for control from concept and design to manufacturing and production. Both HX models include a power boost feature, which delivers 9% more PTO hp and torque for heavy applications or travel. This feature raises the rated PTO to 76.7 hp on the HX9010C and 91.5 hp on the HX1151C.

Ditch Witch SK1750

The Ditch Witch SK1750 skid steer is built with the power and reliability to complete tasks on construction sites.

This machine is equipped with a patent-pending track system that provides stable rides and versatility on rugged terrain.

Designed to handle a range of landscape, irrigation and tree-care projects, the new track system features a tension check window, which allows operators to visually check track tension without threading a separate gauge tool. The track design provides a smooth ride with maneuverability and stability, while transporting heavy loads across rough terrain. The track design causes minimal disturbance to the ground, meaning operators can spend less time repairing damaged turf on the jobsite. The roller design adds to the lifespan of the machine.

Caterpillar 255 & 265 Compact Track Loaders

The new 255 and 265 loaders are powered by Cat C2.8T and Cat C2.8TA engines respectively, which offer 74.3 hp (55.4 kW). The new engines maintain horsepower across a wider rpm range and feature torque increases—gains of 13% for the 255 and 43% for the 265 for performance.

A redesigned engine compartment mounts the engine and cooling package lower into the frame for stability when handling heavy loads. The new 255 loader delivers lift height, and compared to the 259D3, delivers 36% more tilt breakout, 26% higher lift breakout force and a 24% increase in rated operating capacity.

Standard hydraulic system pressure is increased to 3,500 psi (24,130 kPa). New for these machines, the closed-center auxiliary hydraulic system allows the 255 and 265 to operate all Cat Smart Attachments, including the Cat Smart Dozer Blade, with the standard auxiliary hydraulics provided.

Komatsu PC900LC-11 Excavator

CRT-800 Rubber Tracks C-Lug

CRT-800 Rubber Tracks Mini-Ex

Learn more

www.trelleborg-tires.com/en-us

16

EQUIPMENT TODAY | March 2024

Built for tough jobs that require high performance, the Komatsu PC900LC-11 excavator is a versatile machine. It is designed for heavy construction, demolition, material handling, deep sewer, water, large mass excavation, and mining or quarry work.

The 842-hp PC900LC-11 was featured in Komatsu’s booth at CONEXPOCON/AGG 2023. The PC900LC-11 offers major design enhancements compared to the earlier model. The new counterweight removal system helps with moving, and the boom configuration reduces transport height.

A new service pass-through area allows access to filters, oil level checks and sample ports. The major structures, booms and arms, with a redesigned revolving frame, were engineered for longevity. To help operators with situational awareness, tools such as the KomVision camera system come standard on the PC900LC-11.

KomVision is a 360-degree monitoring system that uses six cameras for a real-time view of the surroundings. Smart Construction 3D guidance and payload monitoring are other available options.

www.ForConstructionPros.com/Equipment

THE DOER’S DREAM Loved for the features. Trusted for the performance.

Hyundai wheel loaders have the power and performance, not to mention top-notch interiors, accurate onboard weighing system, industry proven drivetrain durability, clear sightlines, and handy tech that make life on the jobsite easier. So you can do more without feeling it. No wonder so many first-time Hyundai users become longtime fans.

Learn more

NE W L M O DE

HL985A

Two-pass wheel loader See the Hyundai difference yourself at your local dealer or na.hd-hyundaice.com.

E A RT H MO V I N G Products John Deere 444 G-Tier Wheel Loader

Link-Belt 220 X4S

The Link-Belt 220 X4S excavator is powered by a 160-hp Isuzu turbocharged diesel engine and features an operating weight of 49,200 lbs. It has a maximum dig depth of 21 ft., 10 in. and can reach a maximum travel speed of 3.5 mph.

Dynamic stability control, payload, height, depth alarm and a digital level are all standard equipment on the 220 X4S. The 220 X4S features custom flow balance, customizable joystick function buttons, several work modes and Trimble-ready components.

Operators can access a 10-in. display to view the status of components and the surrounding area during use. A dual band modem supports RemoteCARE communication for remote monitoring.

Cat 304 Mini Excavator

The new TRS4 and TRS8 S45 plus updated TRS6 models allow attached work tools to rotate 360 degrees and tilt 40 degrees side-to-side. This allows the machine to reach more work areas from one position, while maneuvering tools over, under and around obstructions when excavating, grading, sorting recycle materials or placing pipe.

The new TRS models multiply the mini excavator’s versatility and are available in different configurations to match the application. System design includes a top interface that connects the TRS to the carrier machine and a bottom interface that connects work tools to the TRS. Top interface connections for the TRS4, TRS6 and TRS8 include a choice between an S type hydraulic-coupler or pin, while bottom interface options include the pin grabber or S type coupler.

John Deere launched the 444 G-tier Wheel Loader as part of its performance tiering strategy, offering customers a model that provides reliability without the extras that they would find in a P-tier or X-tier machine.

The versatility and ruggedness of the 444 G-tier are This latest addition to the wheel loader lineup aims to cater to the segment of the construction market requiring reliability.

The 444 G-tier offers similar performance as other models in its size class, including the 444 P-tier Wheel Loader. The 444 G-tier can be equipped with optional high-lift, expanding the machine’s reach. The optional debris package comes equipped with a centrifugal air pre-cleaner and an auto-reversing fan.

The stacked cooling package, with the hinged door for cleanout, can be set to automatically reverse at regular intervals. Additionally, operators have ground-level access on the machine’s left side, making refills of major fluids, fuel and DEF straightforward.

The cab, crafted with ergonomic considerations, comes with adjustable controls, added floor storage space and a joystick with integrated forward, neutral and reverse controls.

Optional air-ride suspension seat and ride control features help elevate the operator experience on the job.

The 444 G-tier can be equipped with a range of attachment options, from snow blades to grapples. Lastly, the in-cab adjustable boom settings help support operations, especially when performing repetitive tasks.

The 444 G-tier features JDLink in base, which enables access to service advisor remote and expert alerts, as well as support from trained technicians and access to replacement parts when needed.

Volvo EC37 & ECR40 Excavators

Volvo Construction Equipment (Volvo CE) unveiled two new compact excavators for North America: the 3.5-ton EC37 and the 4-ton ECR40. These models replace the EC35D, ECR35D and ECR40D. This duo shares the same platform and components, though the EC37 excavator has a conventional upper carriage design and the ECR40 excavator has a short swing radius to allow for work in more confined spaces.

The new EC37 and ECR40 excavators give operators an accessible cab. It provides visibility thanks to slim corner pillars and wide, flat glass areas. The armrest and controls float with the seat, and the door opening and travel pedals are larger than in previous models.

The intuitive jog wheel and human machine interface functionalities provide controllability and adaptability for various job requirements.

Work modes now include an ECO mode and an auto engine shutdown in addition to the existing auto engine idle.

With auto engine shutdown, hours not worked are excluded from recording.

KIOTI TL750 & SL750 Hitachi Medium and Large ZAXIS-7 Excavators

Hitachi Construction expanded its ZAXIS-7 line of medium and large excavators with the ZX250LC-7, ZX300LC-7, ZX350LC-7, ZX490LC-7, ZX690LC-7 and ZX890LC-7.

Ranging in operating weight from 58,433 lbs. to 192,938 lbs. (26,500 kg to 87,500 kg), these excavators are equipped with a strengthened X beam undercarriage.

An anti-mud-compaction, lower roller design helps prevent mud from entering and damaging the oil seals. The upper and lower rollers also feature idler sealing.

The cab features head clearance and leg room with a one-touch, adjustable air suspension seat synchronized to move with the console for adjustments.

Panoramic visibility from the operator’s seat helps create a safe working environment with five different camera views from inside the cab on an 8-in.

(20.32-cm) anti-glare LCD monitor, including a wide 270-degree bird’s-eye view of the machine’s environment.

DEVELON DX225LC-7X

The DX225LC-7X is the first electronically controlled crawler excavator from DEVELON. The system enables machine guidance and machine control systems, including 2D grading for accurate earthmoving and grading work.

The DX225LC-7X offers reliable hydraulics and workgroup to deliver power and durability to the arm and bucket, maximizing lifting capability.

Equipped with a 162.3-hp engine, it offers a maximum dig depth of 21 ft., 7 in. An optional dozer blade and the standard counterweight design provide strength and stability. Operators can also activate the tiltrotator mode for precision when using a tiltrotator accessory.

18

EQUIPMENT TODAY | March 2024

KOBELCO SK230 & SK270 -7 Series Excavators

KOBELCO launched the SK230SRLC-7 and SK270SRLC-7 (57,000-lb to 61,000lb.) models in North America. These KOBELCO excavators are mid-size machines, offering full-size capabilities with short rear swing features.

Both models feature a compact design and long digging reach to provide maneuverability and a broad working range. With digging depths of 21 ft., 7 in. and 21 ft., 10 in. and supporting swing speeds, the they deliver continuous operation and short cycle times.

These machines have an ISO digging force of 29,700 lbs. and a maximum digging reach of 31 ft., 10 in., and features an ISO digging force of 35,300 lbs. and a maximum digging reach of 32 ft., 4 in. to achieve increased work volume.

KIOTI Tractor has unveiled its latest innovation with the launch of the TL750 Compact Track Loader and SL750 Skid Steer Loader. Both machines feature a wide cabin, available with the standard open station design or an optional enclosed cab with HVAC. The compact models include a high-back suspension seat and LCD digital display. The standard roll-up style door allows for entrance and exit, regardless of the position of the bucket or attachment. The overhead door design increases flexibility on the job as operators can work with the door open or closed. Both models utilize a 74-hp KIOTI diesel engine. Field-tested across various applications, the engine delivers consistent power and reliability. Designed to lift, push and power through rigorous demands, the machines have up to a 10.8ft. height to hinge pin and vertical lift path. Operators can dump materials into trucks and high-sided hoppers.

Bobcat L95 Compact Wheel Loader

Bobcat offers the L95 compact wheel loader, which is designed to support heavy lifting and transporting heavy loads around jobsites. The L95 provides material-handling capabilities with large bucket capacity, lift height, responsive travel and maneuverability.

The L95’s compact size, tight turning radius and Power Bob-Tach interface supports the machines’ versatility for performance.

With a standard bucket capacity of 1.2 cu. yd. and 10.5 ft. of lift height, the L95 is capable of material handling and other jobs that require maneuverability. Its electronic hydrostatic transmission delivers directional changes, acceleration and speed control that helps operators tackle tough tasks on jobsites.

www.ForConstructionPros.com/Equipment

Heavy equipment in verified condition Take the guess work out of buying online with bidadoo.

Inspected

Guaranteed

Experienced

Trusted

Trained experts inspect the equipment from its chassis down to its sprockets, create a detailed Verified Conditions report, and upload photos and video to every listing.

Your purchase is protected through eBay’s Business Equipment Purchase Protection.

All inspections are completed by bidadoo experts, a trusted eBay partner with over 20 years of industry experience.

Get end-to-end support at every step through bidadoo experts for questions about the product, shipping, financing, or liens and warranty.

Chassis

Easily find quality used equipment Our five-star rating system confirms the quality of the equipment you’re purchasing.

A quality and condition rating is given to product specifics like chassis, undercarriage, engine, hydraulic system, and more.

Sheet Metal/Body Paint/Decals Frame C-Frame/Push Arms Blade Linkage Pins/Bushings Belly Pans

Undercarriage Track/Show&Link Condition Track Tensioners Front Idlers Sprockets

Rating Key Based on age and use Poor Very Good

ATTACHMENT Products

Loftness Stump Grinder Attachment

Werk-Brau Tilt Bucket Attachment Diamond Mowers Drum Mulcher DC Pro Delivering mulching performance for loaders up to 75 hp, the Drum Mulcher DC Pro is built on Diamond’s Excavator Drum Mulcher platform but is designed for use with skid steers and compact track loaders. Designed to serve as an additional mulching resource for a range of consumers, the new Drum Mulcher DC Pro is differentiated by its lighter weight of just 1,350 lbs. and its 63 CC, two-speed, bent-axis piston motor.

This high-torque hydraulic motor allows the DC Pro to deliver force to power through large material. The DC Pro is engineered with a 50-in. cutting width to slice through trees and brush and mulch material up to 8 in. in diameter.

The depth control drum features forward exposure that allows for tree engagement and cut width relative to weight.

Toro 30-in. Dingo Attachments

Toro introduced a new line of attachments for its eDingo 500 compact utility loader that features a narrow 30-in. width. These attachments are designed for indoor demolition and construction jobsites and fit through a standard 3-ft. door.

The line includes a standard bucket, adjustable forks, a floor scraper and a grapple bucket. The new line of 30-in. attachments is compatible with all Dingo models, except the TXL 2000.

The standard bucket has a capacity of under 3 cu. ft. (0.08 cu. m.). Crafted with a laser-cut, all-steel construction frame, the floor scraper tackles challenging tasks on worksites, from vinyl, quarry and ceramic tiles to carpet squares, paint and glue.

The 30-in. grapple bucket is designed for contractors looking for a bucket to grab, drag, lift and remove demolition debris and materials.

This attachment is compatible with skid steers, compact track loaders and excavators. Equipped with a rigid mount, the Stump Ax features a repositioned power unit.

The attachment does not swing the cutting wheel during use. It has an angled hitch and forward-reaching boom to give the operator visibility and control on the job.

The Stump Ax includes the Phantom Wheel with Tomahawk teeth from Leonardi, which offers cutting performance. The Phantom Wheel also has cut-outs to create a see-through effect for visibility. A 200-cc, high-torque radial piston motor is compatible with power units that have 30-gpm to 60-gpm hydraulic flow ratings. A reversible design allows the motor to be mounted either forward- or rear-facing.

Werk-Brau’s Tilting Bucket attachment includes increased tilt force and 45 degrees of tilt in both directions. The attachments are designed to minimize machine repositioning, which reduces wear and tear on the tracks and undercarriage.

An oversized cylinder design increases tilting force, allowing the unit to hold the desired angle. Integrated cylinder guards protect the cylinders and keep them functioning without damage or leaks.

For compact excavators, a single cylinder design is used, while full size excavators use dual cylinders.

The heavy-duty excavator bucket is built with high quality T-1 steel used in critical or high wear components, with a rigid top section to eliminate flexing.

Antraquip Rockwheel Attachments

Carbide rockwheels and diamond saw attachments are available for excavators of all sizes and for different applications.

Loftness Battle Ax Mulching Head

The Battle Ax mulching head features an allnew rotor with a unique depth gauge design.

It optimizes the material feed rate for top efficiency without hindering your performance like competitive mulching heads.

The Battle Ax also includes the Loftness exclusive 2-stage cutting chamber for superior material processing. Models are available for many sizes of skid steers, excavators and prime movers.

• Carbide rockwheels offer a cutting solution for soft to medium hard rock and concrete cutting applications with a minimum width of roughly 2 in.

• Diamond saw rockwheels (AQD Series) cut the hardest rock including granite, basalt, etc., as well as reinforced concrete

Liebherr LIKUFIX Quick-Coupling System

The fully automatic LIKUFIX quick-change system, previously available for the company’s hydraulic excavators and medium-sized wheel loaders, is now available for additional wheel loader models. The system is now available for the L 506 and L 508 compact loaders*, the L 507 and L 509 stereo loaders* and the XPower large wheel loaders up to the L 580.

It continues to be available for the L 526, L 538 and L 546 medium-sized wheel loaders.

• Enables attachments to be easily changed at the push of a button from the cab • Hydraulic lines connected automatically • Hydraulic coupling is supported by springs so forces aren’t transferred to the coupling system

IronCraft X-treme Tree Reaper Brush Cutter

IronCraft introduced the X-Treme Tree Reaper, a stout brush cutter attachment for on-farm or commercial land clearing applications. Engineered for demanding applications, the X-Treme Tree Reaper is available with two direct-drive motor options: a 16 gpm to 26 gpm gear motor (case drain not required) or a 17 gpm to 30 gpm bent axis piston motor (case drain required).

The design includes bolt-on replaceable skid shoes and a tapered deck for lower ground cutting. Three 5/8-in.

AR400 blades cut dense brush, limbs and trees to 7 in. in diameter.

The non-welded blades can be changed in the field. Optional grill and mulching teeth are available.

20

EQUIPMENT TODAY | March 2024

• Connections between hydraulic circuits remain tight even with long periods of use

Ignite Attachments 50-in.

General Purpose Bucket

Ignite Attachments offers the General Purpose Bucket attachment for construction work vehicles, including skid steers and track loaders. This 50-in. bucket can be used for lightduty grading and leveling applications, as well as material handling.

During use, the bucket combines reliable breakout force and a longer bottom for increased capacity and visibility to the cutting edge. It features a round back design for loading and cleanout, as well as a low heel to support cutting to grade and back dragging. The attachment has thick walls with weld-on side cutters that promote bucket strength.

Operator guidance is facilitated by dual level indicators.

• All moving parts easily accessible for ease of maintenance *Models not currently available in North America

Hilltip SnowStriker VTR Snowplow

Hilltip’s new SnowStriker VTR snowplows are designed for compact tractors and loaders weighing 2.5 tons to 5 tons. These v-plows feature heavy-duty box construction to withstand harsh winter conditions.

Available in six models ranging from 5.5 ft. to 8.6 ft. wide, VTR snowplows have a curved, powder-coated snow blade to create a snow-rolling effect.

The blades are made of high-strength steel, helping to make the plows light, yet durable. An adjustable, two-segment cutting edge with trip springs offers plow protection. Additionally, the plow provides superior coverage because the segments compress independently when obstacles are hit. The cutting edges are available in polyurethane or high-strength steel.

www.ForConstructionPros.com/Equipment

ATTACHMENT Products

Loftness Tilt Hitch for Excavator Mulching Heads

The Tilt Hitch for 20 and 30 Series Battle Ax excavator mulching heads allows operators to hydraulically tilt the mulching head on the boom. When equipped with the Tilt Hitch, a mulching head can be tilted up to 45 degrees to the left or right.

Compared with traditional units, which typically have restricted movement in one direction, the Loftness hitch offers a greater range of motion during use.

Tilting the mulching head allows an operator to expose the knives when cutting into trees. Trees can be held in place for mulching performance by tilting and positioning the head so that the shear bar rests against the tree to prevent it from wobbling.

Artillian Tractor Rock Bucket Attachment Series Artillian Tractor’s Direct Attach Rock Bucket with fitment for John Deere Quick Attach and Skid Steer Quick Attach (per SAE J2513) loaders clears rocks and debris while leaving soil behind. With 2-in. tine spacing, most soil and small objects pass through.

Tines and side plates have serrated edges. Built from AR400 steel plate and structural steel tubing and engineered with a high strength-to-weight ratio, the 54-inch Artillian Rock Bucket is designed for compact and sub-compact tractors.

At 190 lbs. to 200 lbs., it comes in at just over the weight of a subcompact OEM material bucket.

IronCraft 4-in-1 Power Rake

The IronCraft Multi-Purpose Power Rake is an innovative landscape tool that combines a 4-in-1 bucket along with a power rake. With this solution, operators no longer have to change attachments to finish preparing the soil bed.

The rake can be used for back dragging, digging and grappling. Powered by a directdrive motor, a flow rate of 15 gpm to 25 gpm is required during application.

Side cutters and 1-1/4-in. pivot pins are standard on the attachment. It is available in different widths and sizes for installation on large machines to mini skid steers. Customers can choose from the following sizes: 66 in., 72 in., 78 in. and 84 in.

Ignite Attachments Breaker and Concrete Chute Bucket

Ignite Attachments offers a heavyduty line of breakers, designed for use on construction sites. The three-model series features a straightforward design.

With a dual mounting option and a powerful strike, Ignite breakers can be used with mini track loaders and skid steer loader adaptors, supporting fleet flexibility for demanding demolition jobs.

The company also offers a new concrete chute bucket. The new bucket features a removable spout, for maneuverability in tight spaces. It also employs laser-cut steel and robot welding. The new concrete chute bucket is available in one size and has a capacity of up to 0.75 yd.

MB Crusher MB-G400 & MB-G500 Sorting Grapple Attachments

The MB-G400 weighs 441 lbs. and is designed for mini excavators from 5,500 lbs. to 8,900 lbs. The MB-G500 weighs 926 lbs. and can be used on mini excavators from 11,200 lbs. to 15,700 lbs.

These new sorting grapples have a wide claw opening, allowing them to move and handle large materials. A loadholding valve prevents accidental opening of the claws in the event of a sudden drop in pressure from the carrier machine.

The products also have a silent block, which allows the attachments to be used in areas where noise needs to be kept under control.

The wear parts are made of Hardox.

Both models are designed for installation of an electrical kit for two-hose function.

SnowEx SPEEDWING Winged Plow for Skid Steers

The SnowEx SPEEDWING winged plow enables snow clearing in public areas, roads and outdoor sites. Designed for use on skid steers, the SPEEDWING is engineered with mechanical wings that automatically adjust from scoop mode to windrow position as the plow is angled.

It also features an oscillating mount, allowing for direct attachment to skid steers. The oscillating attachment provides six degrees of side-to-side movement for scraping and cuttingedge wear while reducing damage to the terrain.

This design allows the skid steer loader bucket’s hydraulics to lift and lower the blade based on the operator’s preference.

Manitou Construction Bucket

This is a durable bucket designed for intensive use: digging, soil or rubble handling applications. Includes a wide range of bucket capacities from 500 L to 1500 L. The construction bucket is suitable for handling materials with a density ≤ 2,1. The bucket is equipped with interchangeable teeth for better longevity.

Specially created for building site and earthwork. The very rigid structure ensures excellent bucket life. The bucket is fitted with teeth made for an easy and powerful penetration on earth.

Steelwrist SQ90 Fully Automatic Quick Couplers

The SQ90 fully automatic coupler system is targeted for excavators up to 70 tons in the demolition industry.

• Provides increased safety and the ability to change hydraulic powered work tools in seconds without leaving the cab • Compliant with the Open-S standard • The upgraded Front Pin Lock safety solution offers mechanical lock of the front shaft to limit the risk of an unintended drop of heavy demolition tools • Hydraulic couplings with Qplus technology enable higher hydraulic flows with less pressure drops

SEPPI M. L7 Flex Offsetting Mulcher Werk-Brau D-Lock Coupler

The Werk-Brau D-Lock Coupler facilitates secure attachment connections on construction machines from 1.5 tons to 120 tons. This coupler is dual locking, meaning attachments remain securely engaged on both pins in the event of loss of engagement force.

The product features a compact design of only seven moving parts, requiring only two hoses, no greasing and a simple operating sequence. For safety, the coupler is equipped with an automatic front lock, which locks the front pin in the event that the rear pin is not secured.

The unlock process is designed to release only when the operator intends to do so, in a controlled and safe manner, and prevents accidental release.

SEPPI M. showcases its new offsetting mulcher for the mulching of vegetation along watercourses and roadsides and land clearing and site preparation. In addition to the L9 flex type for 130-hp to 240-hp tractors, the lighter L7 flex version is now available, for 80-hp to 160-hp tractors, which replaces the original SAV model.

The new L7 flex model is based on the technology and concept of the L9 flex model. However, because of its low weight, it can also be used with smaller tractors.

The L7 flex model is available in the work widths 150/175/200/225. The new L7 flex was developed to respond to changing market conditions. Thanks to the new design, it is now possible to shred large slopes with reach and safety for operators and the machine.

March 2024 | EQUIPMENT TODAY

21

Seppi M. MINIFORST cl AMERICA Special Edition Forestry Mulcher

AT TACHM E N T S Products

Fecon Unveils Disc Hawk Compact Mulcher

Fecon expanded its line of attachments with the launch of the Disc Hawk disc mulcher. Specifically designed for highflow skid steers and compact track loaders, the attachment can be used for mulching, landscaping, site preparation and land clearing.

Fecon’s disc mulcher enables firstpass vegetation removal or material dispersion without fine chip size. With a working width of 60 in., the disc mulcher is purpose-built for 75-hp to 132-hp skid steers and compact track loaders that operate with as little as 30 gpm to 50 gpm of auxiliary hydraulic flow.

The unit provides performance for mulching thick vegetative material at high speeds. A low-profile motor and deck configuration provides visibility and reduces material buildup.

Loftness Kwik Cut Brush Cutter Attachment

Loftness introduced the Kwik Cut brush cutter attachment for skid steers and compact track loaders. Featuring a combination of beveled blades and carbide teeth, the new Kwik Cut is designed to slice through grass, weeds, brush and small trees up to 10 in. in diameter with the ability to grind stumps and brush to ground level.

The Kwik Cut’s heavy-duty, 72-in. diameter disc is equipped with four dual-edge beveled blades, which are designed to retract on severe impact to protect them and other components from damage. The underside of the disc contains 18 carbide teeth for grinding.

They are mounted with a single bolt for maintenance.

Seppi M. announced the launch of the MINIFORST cl AMERICA Special Edition attachment for the U.S. market. This specialized forestry mulcher brings technology and craftsmanship to jobsites, offering a reliable solution for land clearing and vegetation management.

Designed to meet the needs of users, this forestry mulcher is equipped with a variable torque motor featuring M-BOOST technology. It accommodates loaders with 20 gpm to 50 gpm, delivering consistent power and performance under varying conditions.

The inclusion of an adjustable guard frame provides flexibility and control over the mulching process. The AMERICA Special Edition comes with 1-in., 6,000-psi hoses equipped with 3/4-in. quick couplers for setup.

Fecon Trim Ex Saw Attachments

Fecon provides Trim Ex saw attachments for tackling overhanging tree limbs and other vegetation along easements, rightof-ways, roads, fence rows, paths and other applications. This series includes the following products: Trim Ex 26S, Trim Ex 18C and Trim Ex 26D. The company recently acquired TREEfrogg, a manufacturer of tree trimming saw attachments for skid steers and compact track loaders. The acquisition expands the right-of-way clearing solutions offered by Fecon in the forestry mulching and vegetation management industry.

Designed to fit small to midsize carriers, TREEfrogg’s patented tree trimming saws allow landscapers, landowners and DOT’s to perform tree maintenance with machines.

Fecon rebranded the saw attachments as Trim Ex.

Diamond Mowers Brush Cutter Pro X

Premier Attachments Duo-Tach

Premier Attachments unveiled the new Duo-Tach (PAT. 11,280,057) mounting system. It is compatible with all major brands of skid steers. It also works with all major brands of mini skid steers including Ditch Witch, Vermeer, Toro, Boxer, Bobcat MT, Kanga, Ramrod and others.

The Duo-Tach mounting bracket is for full-sized skid steers, using the universal skid steer mounting style, and mini skid steers, using the common industry standard mini skid mounting style.

The solution shares the same basic structure built into one Duo-Tach attachment. This allows the owner to use one attachment for both mini skid steers and full-size skid steers on jobsites.

Werk-Brau Box Grapple Attachment for Heavy Demolition

Werk-Brau introduced a wide mouth, box-style grapple attachment specifically designed to handle objects of differing sizes like demolition debris, brush and rocks. Standard sizes are engineered for excavators from 12 tons to 60 tons, with additional tine- and width-configurations available to meet job-specific applications.

The attachment features rugged construction with T-1 steel used in all critical or high wear components. Wearresistant, high-strength steel throughout the weldment and hardened, greaseable bushings used at all pivot points deliver durability in harsh conditions. Edge pads at the end of each tine allow for long service life.

IronCraft X-treme Skid Steer Trencher

New IronCraft X-Treme Skid Steer Trenchers are designed for handling tough soil conditions, site preparation and land clearing. This includes dirt chain, ½ rock and frost chain or full rock and frost chain dig water lines, cable lines and invisible fencing.

Equipped with a rock guard, two arm sizes are available for different depths.

Differing chain widths are also available in 36-in. or 48-in. lengths.

Customers can choose from 15 gpm to 20 gpm and 20 gpm to 30 gpm with a 15-in. auger models to match their project requirements.

22

EQUIPMENT TODAY | March 2024

The heavy-duty, hydraulically driven 40-in.

Excavator Brush Cutter Pro X slices trees and brush up to 4 in. in diameter and is equipped with a spring-loaded, retractable shield to deflect debris.

Its simple design keeps operation and maintenance costs low, and it’s most productive on tall grass, small trees, fence lines and large-scale brush clearing applications thanks to the Tri-Hex mulching disc that provides powerful inertia in tough conditions and prevents material build-up between the deck and blade carrier.

The Excavator Brush Cutter Pro X also comes available in 50-in., 60-in. and 72-in. cutting widths to handle materials up to 10 in. in diameter.

MiniTrencher Attachments

MiniTrencher announced several new products and attachments, including a horizontal auger, a new electric batterypowered division, new GeoRipper T/A trenching attachments for the Milwaukee and Echo powerheads and a redesign of its flagship product, The GeoRipper.

The SiBore Drill is a portable horizontal auger that digs underneath concrete, asphalt or any other hard material without breaking the surface.

The SiBore Drill uses a waterless-boring method leaving no mud to deal with.

Using a Greenworks or Makita XGT electric battery motor, the GeoRipper e/B is a complete trenching unit that includes a battery-powered motor; battery and charger; and MiniTrencher digging chains, bars, and accessories.

www.ForConstructionPros.com/Equipment

MB Crusher BF70.2 Bucket Attachment

MB Crusher offers the BF70.2 bucket crusher attachment for large-scale projects, including construction, road work, forest maintenance, recycling aggregate, demolition and urban sites.

This attachment features a 29-in. wide mouth opening.

The BF70.2 can be installed on heavy equipment and can crush materials during use. Furthermore, the crushed materials from the bucket can be recycled and used for many purposes and applications, including asphalt production.

Available accessories include a spare parts kit, fixed coupling, iron separator, hour meter and dust suppression kit.

These additions support specific operating requirements at the jobsite.

FISHER XRS Snow Plows for Skid Steers

The XRS Skid Steer Plow by Douglas Dynamics offers versatile snow removal in winter conditions. Designed specifically for skid steer applications, this rugged plow automatically retracts the inside wing when fully angled and then automatically returns to the scoop position once straight.

The XRS plow leverages the onboard hydraulic system of the skid steer to lift and lower the blade, supporting operator performance. The oscillating skid steer mount comes standard and provides six degrees of side-to-side oscillation for scraping while reducing damage to the terrain. Available accessories include a 10-in. rubber deflector, shoe kit and quick coupler set.

Engcon S60 Machine Coupler for Excavators

Engcon launched a new machine coupler for excavators in the class size of 12 tons to 19 tons. The EC-Oil blocks can be used for retrofits as the new machine hitch contains almost no hoses and minimizes the risk of leaks.

A new bolt-on EC-Oil block facilitates hydraulic flow. Features include: an EC-Oil block without hoses, reinforced construction both laterally and in the digging direction, stability around attachment points to the machine, flexible hose routing between excavator and machine coupler, a bolted lifting hook, and possibility with lifting eye.

Fecon PTO Bull Hog Mulchers

Fecon’s new line of power take-off (PTO) Bull Hog Mulchers are designed for PTO equipment. Created for tractors with 45 hp to 110 hp, the mulchers create a new opportunity for farmers, ranchers and other landowners who have land upkeep needs and already own PTO equipment.

The PTO Bull Hog Mulchers can attach to any tractor with a three-point hitch and include three different size options—the

RK6013P, RK6015P and RK7316P. The RK6013P, the smallest of the three, has a 60-in. rotor size from a 13-in. rotor and can be run on any 45-hp to 70-hp tractor. The RK6015P keeps the 60-in. rotor size but with a slightly larger 15-in. rotor and attaches to 50-hp to 90-hp tractors. The largest of the PTO Bull Hog Mulchers, the RK7316P, has an increased rotor size of 73 in. using a 16-in. rotor and runs on larger tractors with 80 hp to 110 hp.

Manitou High-Strength Demolition Bucket for Compact Machines

Manitou’s High-Strength Demolition Bucket for compact machines is a strong bucket for severe application, such as demolition and ship trimming. It is constructed with reinforced structure, including the sides and upper part.

It includes a 400 HB wear plate and side plates. It’s a low-profile bucket designed for good material penetration and cab access. It has a heaped capacity of 48 gal. to -230 gal. and a width of 43 in. to 48 in.

DEVELON HB-Series Hydraulic Breakers

DEVELON expanded its attachment offering with the launch of HB-series hydraulic breakers, the HB06H and HB15FH, in North America. The breakers are engineered for performance, durability and maintenance in demolition, mining, quarry and general construction applications.

The HB06H and HB15FH are compatible with DX62R-7 and DX63-7 mini excavators, DX140LC-7 and DX140LCR-7 crawler excavators, and the DX140W-7 wheel excavator. DEVELON HB06H and HB15FH breakers feature heavy-duty materials and components.

The breakers’ durability is supported by a heat treatment process and the use of heavyduty materials for different components, such as the cylinder and piston.

Hilltip IceStriker DSB

Hilltip offers a winter maintenance drop spreader for compact tractors and loaders.

Available in 8-cu.-ft. to 18-cu.-ft. capacities, the new IceStriker DSB has a self-loading design and can be mounted on the front or back of vehicles.

It is capable of spreading salt, sand and fine gravel in different applications, including parking lots, courtyards, walkways and pedestrian paths.

The IceStriker DSB comes standard with hydraulic motors and conventional controls. A 12-V electric drive is optional. Customers can also upgrade to StrikeSmart controls, using either a hard-wired CAN bus controller or Bluetooth-enabled smartphone controls.

These automatic controllers feature Hilltip’s HTrack tracking software, which is a twoway GPRS communication system that allows functionality.

Ditch Witch Rock Saw Attachment

Toro Snow Clearing Attachments

The Dingo Snow Thrower’s two-stage design provides power to break up chunks of hardened snow and throw it out of the path, leaving a clean surface.

The chute can be adjusted from the operator’s position. Thanks to its electrical articulation, drivers do not have to hand crank it into position.

The Snow Thrower features a directdrive design for torque and power. The worm gear drive and hydraulic relief systems are durable.

This attachment’s maximum hydraulic pressure is 15.5 gpm. There are also no belts to loosen or adjust over time. The Snow Thrower is designed for use with Dingo TX 427, TX 525, TX 700, TX 1000 and TX 1300 models.

The 4-ft. and 5-ft. BOSS straightblade plow attachments are for clearing walkways and sidewalks. Featuring polyethylene blades, both options are built with a full-blade trip design to minimize the impact of hitting an obstacle. These attachments are fully hydraulic.

Products AT TACHMENT

The new Ditch Witch Rock Saw attachment, a product acquired through the HydraWheel partnership, can cut trenches up to 3 in. to 4 in. wide and 13 in. deep and cuts through tough materials like rock and asphalt.

Compatible with Ditch Witch’s fleet of stand-on skid-steers, ranging from the SK1050 to the SK1750, the Rock Saw attachment features carbide teeth for exceptional durability.

Additionally, minimal maintenance points help minimize downtime and maximize productivity.

As part of the new family of Rock Saw attachments obtained through the HydraWheel partnership, a wide range of products will be available, catering to digging depths spanning up to 46 in. on ride-on tractors.

BATTLE AX LOW AND HIGH FLOW SKID STEERS & EXCAVATORS 10,000 LBS - 88,000 LBS

DON’T BITE OFF MORE THAN YOU CAN CHEW …OR LESS

ASV Site Clearing Attachments

ASV introduced new attachments for forestry, construction, landscaping and snow clearing. The new products include a low-flow mulcher, stump grinders, angle brooms, a teleboom, a long floor bucket, a cold planer and a v-blade.

The attachments are tested and optimized for ASV machines.

Additionally, buyers have the ability to purchase both the attachment and machine from ASV dealers.

Available through ASV’s dealer network, the attachments are durable. Each was chosen and carefully matched to ASV machines for compatibility. The result is performance right off the shelf with plugand-play performance ready to go from day one.

EXCLUSIVE DEPTH GAUGE DESIGN Maximize productivity by not biting off too much, or too little, material at one time. The new Battle Ax rotor has unique depth gauges that optimize the material feed rate for top efficiency.

Mulching Heads

TWO-STAGE CUTTING CHAMBER Thoroughly process material with the exclusive two-stage cutting chamber featuring an adjustable primary shear bar.

Flail Mowers

Mechanical Trimmer LOFTNESS.COM

March 2024 | EQUIPMENT TODAY

23

LIFT EQUIPMENT Products

Read More at eqtoday.co/LiftEquip Manitou MTA 519

Manitou launched the MTA 519, a new compact telehandler that is compact at 5 ft., 11 in. wide and 6 ft., 4 in. tall, with a tight turning radius of 10 ft., 10 in. This makes it small enough to fit through garage doors and down ramps.

It includes a maximum load capacity of 5,500 lbs., a 19-ft, 1-in. maximum working height and outreach of up to 11 ft., 2 in. for loading and unloading materials on the second floor of a structure. It also features five different tire options and a ground clearance of 13 in. for working on varied terrain.

The new MTA 519 features a 74-hp engine that is placed low within the framework of the machine, along with power and drivetrain components. This allows for a low, sloping hood for improved visibility and access for daily service and preventive maintenance.

JLG X660SJ Compact Crawler Boom Lift

Genie 13-ft. Boom Lift Platform

Compatible with Genie S-45 XC, S-65 XC and S-85 XC boom lifts, the 13-ft. platform is for tasks that involve an extensive working area and jobsites with limited space to maneuver on the ground.

The extra space in the platform also provides access to twice as much work area with the same number of boom movements, compared with a standard sized 8-ft. (2.44-m) platform. After following instructions to install the 13-ft. platform and calibrating the machine, the S-45 XC, S-65 XC and S-85 XC can carry two workers to height and deliver a 600-lb. lift capacity.

Additionally, operators can use other features on Genie’s XC machines, including automatic envelope control, working curve and active load sense.

Magni RTH 6.30

The Magni RTH 6.30 Rotating Telehandler is designed for lifting, elevated operations and transport on construction sites. This machine offers a maximum lift height of 98 ft. with a maximum lift capacity of 13,200 lbs. and a maximum lift height capacity of 5,500 lbs.

Powered by a Volvo TAD572VE Tier 4 Final engine, the 6.30 offers 4-wheel drive for stable operation in rugged work areas.

The 4-cyl. diesel engine delivers 218 hp.

This telehandler can travel at a maximum speed of 25 mph. The 6.30 offers the same dynamic features as all Magni models, including 360-degree rotation. Over 100 attachments provide users with several machines in one, including a telescopic forklift, roughterrain crane and aerial work platform.

JLG launched its first straight-jib (SJ) compact crawler boom lift—the X660SJ. With 65 ft., 7 in. of platform height, 500 lbs. of capacity for up to two workers, 39 ft. of horizontal reach and indoor or outdoor versatility, the new JLG X660SJ model is designed for a wide range of applications. It also includes an envelope tracking operation for work alongside buildings, walls and other infrastructure.

The X660SJ comes standard with a Kubota diesel engine, and an environmentally friendly lithium-ion battery and AC drive system option is available, as is JLG’s new bi-energy option. This alternative equips the JLG compact crawler boom lift with two fullsized, independent power sources, combining an emission-free lithium-ion battery pack with a diesel engine.

Toyota Material Handling Electric Pneumatic Forklifts

Toyota Material Handling launched a new line of electric pneumatic forklifts with its 48-V and 80-V models. These new models feature six different lift capacities ranging from 3,000 lbs. to 7,000 lbs.

Toyota’s System of Active Stability springs into action when operators encounter unanticipated loads and speed conditions.

Additionally, Toyota’s Operator Presence Sensing System along with the optional Seatbelt Interlock encourages operators to maintain a properly seated position with the seatbelt buckled or travel and load handling operations will be limited.

Built with standard AC drive and lift motors, along with low noise and vibration levels, this forklift provides reliable operation

JLG Next-Gen ClearSky Smart Fleet

Hyundai Material Handling New Forklifts

Hyundai Material Handling introduced a series of new forklifts powered by diesel fuel and lithium-ion batteries. The new forklifts support lifting and transporting operations on busy jobsites.

The 9V series adapts Hyundai’s powertrain for durability of the transmissions and drive axles. It includes the 25/30D 35DN-9V Diesel Pneumatic Forklift Series which offers a Hyundai diesel engine that meets all EPA/CARB Tier-4 regulations.

This machine features heavy-duty handling, safety features and a new digital-type cluster with MCU function.

Available capacities include 5,000 lbs.; 6,000 lbs.; and 7,000 lbs.

Another offering in the 9V series is the 100D-9V with 22,000-lb. capacity. The 100D-9V is equipped with a Cummins diesel engine.

24

LiuGong S1930DE Mobile Elevated Work Platform

LiuGong offers the S1930DE Mobile Elevated Work Platform for vertical lifting; hard-to-reach equipment installations; or maintenance, inspections and transport on construction sites. This scissor lift can reach a maximum working height of 26 ft. with a working load of 220 lbs. in an extended position, enabling workers to hold and use equipment on the platform during use.

Measuring 64.6 in. (length), the platform is designed to host two workers.

Heavy-duty rails provide safety and guidance on the platform.

It takes approximately 25 seconds to raise the platform to its maximum working height. The S1930DE features a maximum speed of 2.5 mph in a stowed position, powered by a 1-hp drive motor.

With the platform raised, operators can maneuver the scissor lift at a maximum speed of 0.4 mph.

EQUIPMENT TODAY | March 2024

ClearSky Smart Fleet is a next-generation Internet of Things platform for two-way fleet management and machine interactivity.

This generation of ClearSky is a groundup redesign. Key features include digitized daily processes; machine location; additional equipment service capabilities; logistics with Automated Site Networks; and actionable, on-demand machine and fleet insights.

ClearSky Smart Fleet will be standard on most new machines produced later this year, and customers with existing JLG products can continue to use the legacy ClearSky program for their connected needs. Both platforms will be integrated into Online Express, JLG’s 24/7 e-Commerce site.

Skyjack SJ3213 & SJ3219 Micros

Skyjack announced a new micro scissor line with the launch of the SJ3213 micro and SJ3219 micro scissor lifts for low-level access requirements. Fully proportional drive and lift controls offer drive with control and torque, while variable speed brushless AC electric front wheel drive provides duty cycles.

The newest micros have been designed to fit most passenger style elevators and work in tight spaces while still providing a substantial work area.

The models feature 13-ft. and 19-ft. platform heights, a 500-lb. platform capacity, and a 20-in. rollout extension to increase work area and provide up and over capability.

www.ForConstructionPros.com/Equipment

ONE STOP FOR RENTAL & EQUIPMENT SOLUTIONS Whatever your project demands, whenever the demand arises, we’re here to help. United Rentals is the world’s largest and most versatile equipment rental company, offering rentals, expertise and digital solutions to be your one-stop partner. United Rentals can help you meet the demands of any and every job—24/7.

Call 800.UR.RENTS or visit UnitedRentals.com

L I F T EQ U I PM E N T Products Equipment Safety Systems Releases OverWatch

OverWatch by EQSS is a safety system that provides crush protection on scissor lifts.

This secondary guarding system uses a LiDAR sensor to improve scissor lift operator safety without impacting the normal operation of the equipment or the productivity of the worker.

OverWatch was developed in-house by EQSS, in consultation with major contractors and rental companies in Australia to ensure that the product performed effectively in the real-world and can handle the harsh construction environment. The solution has undergone widespread trials on jobsites to ensure it could withstand environmental conditions.

During these tests, EQSS also identified how operators responded to the OverWatch technology. OverWatch has been approved by all major scissor lift manufacturers, including JLG, Genie, Skyjack and Snorkel, for installation on their products and continues to be met with a positive reaction on jobsites globally.

This technology is designed to reduce the risk of injury by entrapment by detecting the operator’s position and movements and intervening only when their safety is compromised. The LiDAR sensor measures movement every 40 microseconds for a constant stream of accurate data and a fast response. It uses an infrared light beam to determine.

Magni RTH 8.35 & 8.46 Rotating Telehandlers

Magni Telescopic Handlers extended its RTH range with the 8.35 and 8.46 models.

The 8.35 resulted from the redesign of the 6.36 model, showcasing upgraded load charts and increased lifting capacity by 2 tonnes.

Its extension modes M1 and M2 give access to two different load charts, to maximize performance in all operating conditions. The RTH 8.46’s boom was developed to provide lifting capacities up to 8 tonnes. With the M1 and M2 extension modes, the 8.46 is a rotating telescopic handlers with one of the highest lifting heights.

MEC 3232SE Slab Scissor Lift

MEC Aerial Work Platforms’ 3232SE for construction, lifting and rental applications. The MEC 3232SE can drive at full height and does not utilize an outrigger levelling system. Other standard features of the MEC 3232SE include a maximum working height of 38 ft., on a chassis 32 in. wide with a platform capacity of 550 lbs.

The machine is equipped with an AC electric-drive system and delivers reliable duty cycles from each battery charge, reducing emissions and jobsite power demand. AGM batteries and MEC’s patented Leak Containment System are standard.

MEC Aerial Work Platforms is a manufacturer of mobile elevating work platforms (MEWPs) in Kerman, California.

MEC’s portfolio of MEWPs ranges from allelectric and direct, electric-drive slab scissors and vertical masts to rough terrain scissors and booms with patented design features.

Sinoboom TB14J Plus Boom Lift Sinoboom’s 14-m telescopic boom lift, the TB14J Plus is designed for lower-level access equipment for work on low-rise construction projects. This product has a platform height of 14 m and a working height of 16 m, compared with 18 m and 20 m models.

The new model features a threesection boom design, resulting in a short stowed length. This factor enables two machines to be loaded into one container or on a single flatbed truck.

It is fitted with a low-power, 18-kW engine, capable of meeting low maintenance requirements. TB14J Plus can be used on uneven terrain and features three-stage loading capacity of 454 kg, 340 kg and 250 kg, active oscillation, four-wheel drive and 40% gradeability.

26

JCB S1932ED

JCB’s S1932ED Electric Drive Scissor Lift was redesigned to prioritize transportability by reducing the weight by 250 lbs. This reduction enables flexibility, making it possible to tow and load onto vehicles.

The machine is equipped with quickfolding rails for navigating through low doorways and other restricted spaces. The S1932ED now comes standard with a leak containment system, reducing the risk of fluids escaping onto working surfaces, which helps prevent potential damage and maintain a clean, safe environment.

This scissor lift offers an optional pipe rack capable of securely transporting up to 220 lbs. of materials.

EQUIPMENT TODAY | March 2024

Manitou MTA Construction Telehandlers

The Manitou MTA Construction Telehandler range includes the MTA 642, MTA 842, MTA 1055, MTA 1242 and the MTA 1255. The MTA Telehandler range offers a new cab design, providing enhanced comfort and better visibility around the machine and on the attachment. Noise pollution is greatly reduced to 80 dBA inside the cab.

The driver’s station offers an intuitive dashboard that provides operating and maintenance alerts and the joystick switch and move allows fingertip control. These new models start at 74 hp on the MTA 642 with a 6,000-lb. lift capacity and go up to the 127 hp on the MTA 1255 lifting a maximum of 12,000 lbs.

The range will reach heights from 42 ft. to 55 ft., 7 in. with a long robust high-strength steel boom to stage pallets of bricks and bulky loaders of lumber multiple stories high.

JLG SkyTrak 6034 & 6042 Telehandlers

Featuring a redesigned build, reworked functionality, reimagined technology and refocused serviceability, these 6,000-lb. maximum lift capacity telehandlers can be used for pick-and-place applications, such as handling, loading and unloading bulk materials.

The new 6034 telehandler replaces the previous 6036 model, while the 6042 telehandler was updated with new features. For example, these updated units feature a lower operating weigh —14,500 lbs. on the 6034 and 19,100 lbs. on the 6042.

The 6034 model offers a lift height of 34 ft. and a forward reach of 23 ft. The 6042 model provides a lift height of 42 ft. and a forward reach of 29 ft. Both the 6034 and 6042 offer three steering modes—twowheel, four-wheel and four-wheel crab.

Sims Crane and Equipment LR 1250.1 Battery-Powered Crawler Crane

Pettibone Extendo 1544X Telehandler

Pettibone brings its X-Series telehandler lineup to the 15,000-lb. lifting class with the introduction of the Extendo 1544X telehandler. The added load capacity supports material handling tasks in highway construction, pipe yard applications and for extended load requirements on traditional building sites.

The machine is powered by a 117-hp Cummins QSF 3.8 Tier 4 Final turbo diesel engine. It has a maximum lift height of 44 ft. and maximum forward reach of 29 ft. The telehandler has a maximum load capacity of 15,000 lbs.

Sims Crane and Equipment showcased its battery-powered crawler crane at its corporate headquarters. Sims Crane hosted the crawler crane’s U.S. debut event in conjunction with the crawler crane’s designer, multi-national equipment manufacturer Liebherr.

The two companies held a presentation, explaining the companies’ history and the features of the newly manufactured LR 1250.1 unplugged electric crane.

The crawler crane’s battery-powered engine reduces local carbon emissions and is capable of operating for 8 hours unplugged or for extended periods when connected to a power source.

According to Liebherr and Sims, performance is similar between the electric version of the crawler crane and its diesel-powered counterpart.

www.ForConstructionPros.com/Equipment

Do more with BE T TER results.

You can meet expectations. Or you can crush them.

The JCB Telehandler is the ultimate material handling machine. So, while everyone else is getting the job done, you can get it done better. Learn more at JCB.com.

WORKSITE EQUIPMENT Products

Read More at eqtoday.co/worksiteequipment Western Global FuelCube Type-S Fuel Tank

Blue Vigil ALED Portable Drone Light

The drone light is aimed at making nighttime sites safer. Blue Vigil’s ALED is a compact area lighting system that mounts a high-intensity LED array on a tethered drone, positioning the light 40 ft. (12 m) up to 100 ft. (30.5 m) above a jobsite.

The ALED puts over 8,000 sq. ft.

(743 sq. m) of light on the ground. By illuminating a work zone from 40 ft. to 100 ft. above, light shines directly down onto the area of operation, without creating the dangerous glare and shadows that negatively affect workers, residential environments, wildlife and motorists.

STIHL TS 710i & TS 910i Cutquik

The TS 710i STIHL Cutquik and TS 910i STIHL Cutquik with electronic fuel injection (i) are the newest gasolinepowered cut-off machines within the STIHL Cutquik lineup. These cut-off machines feature STIHL fuel injection technology, eliminating the choke.

The TS 710i and TS 910i are equipped with the STIHL ElastoStart grip, a built-in shock absorber and anti-vibration system.

Users can alter the cutting wheel and guard mount either inboard or outboard for maneuverability and use in additional cutting positions.

Brunner & Lay Demolition Tools

A wide range of demolition tools are available for use with most types of heavyduty, boom-mounted breakers.

• Manufactured from high-quality heattreated steel • Provides the hardness, impact strength and durability required to face arduous conditions in quarrying, mining and other applications • Includes points, chisels, blunts and other specialized working ends and in special lengths

The Air N Arc 330 Diesel ALL-IN-ONE Power System is designed to transform your workday by providing five forms of power in a single compact unit using a single control panel including: air, generator, welder, battery boost and battery charge.

It features a Rotary Screw producing 60 cfm at 100 psi, with the capability to surge up to 175 psi when required. At its core lies a Lincoln Electric AC Brushed Generator, supplying an uninterrupted 10,000 W of continuous output at 120 V/240 V, 60 Hz, ensuring a steady and reliable energy source.

Diamond Products CB215 Hand-Held Drill

With a dual-sided body design, the reusable angled block features a cushioned foam side for contour sanding and a dense foam side for flat sanding and is designed to fit Diablo SandNET sanding sheets.

It can be used dry or wet and features a two-in-one application that provides flexibility. It also includes a corner contact edge for consistent scratch patterns and smooth finishes for edges and tight corners.

Diablo’s angled sanding block provides professionals with the tool they need to sand hard-to-reach areas on drywall, wood, paint, metal, fiber glass and plastics.

28

Metabo HPT 18V MultiVolt Cordless Compact Reciprocating Saw

Metabo HPT’s 18V MultiVolt Compact Reciprocating Saw (model CR18DMAQ4) is designed for remodelers, plumbers, electricians, framers and construction professionals in confined spaces.

The 18-V compact reciprocating saw delivers cutting power with its 1-1/8-in. stroke and 3,000 max SPMs for cutting speed through wood, PVC and metal. This tool is part of the MultiVolt System of 18-V and 36-V power tools from Metabo HPT. As an 18-V bare tool, the user can decide to go lighter by using a compact 18-V battery or go longer with the flexible 18-V/36-V MultiVolt battery to double the runtime per charge with a 5.0-Ah MultiVolt battery BSL38A18 (371751M).

Husqvarna Adds Top-Handle T540 XP Mark III Chainsaw

Vanair Air N Arc 330 Power System

Diablo Tools Hand Sanding Tool

The FuelCube Type-S is a compact fuel tank that fits in the back of a truck.

Available in the U.S., the FuelCube Type-S is a reliable, flexible and transportable fuel tank for fleets on jobsites.

Designed to safely transport and dispense diesel fuel without hazardous material placard requirements, it serves as an alternative to slip tanks. This new solution offers 110% containment, security features and versatility.

The dual-purpose adaptability of the tank allows businesses to use it as a truck bed tank or an on-site tank. The FuelCube Type-S features a 119-gal. capacity and is for 3/4-ton pickups or larger because of the tank’s weight when filled with fuel.

The Diamond Products CB215 hand-held drill motor is a lightweight drill for coring up to 3-in. diameter holes by hand or up to 6 in. mounted on a core rig. This motor has a three-speed gear box with slip clutch and locking gear lever.

The CB215 features an integrated convertible port that allows change from water feed for wet drilling to through-thespindle dust collection for dry drilling. The motor includes a carrying case, wrench, and wet and dry attachments.

This electric motor is powered by 115 V and 1,800 W. The performance ratings are 1,000 rpm; 1,600 rpm; and 4,450 rpm, allowing you to dial in the correct speed for the bit being used. An LED load indicator light alerts the user if too much pressure is applied.

EQUIPMENT TODAY | March 2024

Husqvarna announced new tree care tools with the launch of the T540 XP Mark III and a new line of arborist gear. The new tophandle T540 XP Mark III was redesigned following consumer feedback that resulted in a lightweight, balanced and agile chainsaw for climbing and cutting.

With a high cutting capacity, the T540 XP Mark III was redeveloped for reliability across hours of use. Its lightweight ergonomic design aids operator comfort and AutoTune 3.0 technology enables simple starting and promotes performance in tough environments.

The engine power of the T540 XP Mark III is enhanced with Husqvarna’s SP21G X-CUT chain. AutoTune 3.0 technology allows tree pros to use the same starting procedure on hot or cold starts, with no risk of flooding. Husqvarna’s X-Torq engine design delivers power and LowVib technology reduces handle vibration.

POWR2 POWRSYNC Parallel Battery Solution

Designed to increase power output and storage capacity, POWRSYNC enables the operation of POWRBANK batteries in parallel.

The POWRSYNC device creates a parallel battery system to harness the combined power of multiple POWR2 POWRBANKs. Leveraging this technology, users can connect up to four POWRBANK batteries, whether they are of the same model or different capacities. The POWRSYNC is designed for large applications or applications with fluctuations in load levels such as submersible pumps and motor starts.

As power demand changes throughout the day, the POWRSYNC ensures a stable power supply. When demand increases, the POWRSYNC balances the load between multiple POWRBANKs to meet the peak demand. POWRSYNC increases storage capacity, storing and deploying excess power during peak demand.

DICA Ground Protection Products

DICA featured SlatTrax, a Ground Protection Roadway, AlturnaMATS and VersaMATS Ground Protection Mats.

SlatTrax is a linear roadway system that provides vehicle access to worksites while protecting the ground.

It is made of recycled high-density polyethylene.

The plastic temporary roadway can support most residential construction, landscaping and tree care equipment.

SlatTrax hydraulically powered systems are loaded with 100 ft. of Trax and can be reloaded with additional DIY or Rolled Trax sections to extend service roadways.

www.ForConstructionPros.com/Equipment

WORKSITE EQUIPMENT Products

Perkins 2806J-E18TAG1 ElectropaK Generator

FAE RCU-55

Equipped with a 56-hp KOHLER KDI 1903 turbocharged engine, the RCU-55 can work on steep slopes up to 55 degrees.

This compact tracked carrier can mulch vegetation up to 5 in. in diameter with the BL1/RCU mulcher head and small shrubs and vegetation up to 2 in. in diameter with the PML/RCU mulcher head.

The BL1/RCU mulcher head has a working width of 49 in., and the PML/RCU mulcher head features a 59-in. working width. Its heavy-duty undercarriage features a hydraulic variable track system with independent undercarriage frames for stability on steep terrain.

Perkins announced the launch of the 2806J-E18TAG1 ElectropaK generator, a new addition to the range of EU Stage V power offerings. The generator features a new engine that delivers a powerful package and integration, to meet the requirements of the electric power sector.

By achieving ISO 8528-5 G2 performance, the 2806J provides load acceptance in a wide range of electric power applications. It produces up to 610 kVA at 50 Hz and is switchable to 60 Hz, delivering up to 625 kVA. The ElectropaK features a single, on-engine electronic control module that simplifies wiring harnesses and installation, supports future diagnostics and is capable of integration with customers’ telematics solution.

DEWALT 20V MAX XR 1/2-in. Impact Wrench

DEWALT announced the launch of the new 20V MAX XR Brushless Cordless 1/2in. High Torque Impact Wrench (DCF961) for construction projects, maintenance and repair, building and equipment installation. This tool delivers 1,200 ft.-lbs. of maximum fastening torque and 1,750 ft.-lbs. of maximum breakaway torque.

The impact wrench features new technology that automatically provides an increase in power after four seconds of impacting, aiding in loosening fasteners and completing heavy-duty fastening applications. The DCF961 also features three speeds and PRECISION WRENCH technology to help prevent overtightening and fastener run-off and BATTERYGUARD, a shock-absorbing battery-to-tool connection to help reduce battery wear and tear.

Milwaukee Tool Next-gen M18 FUEL ½-in. High Torque Impact Wrenches

Makita GA45 & GA50 Series Compact Grinders

Makita’s eight new grinding solutions for construction projects include five 5-in. grinders and three 4.5-in. grinders providing options for a range of applications. The new GA45 and GA50 series grinders feature Makita’s SJS II Technology.

SJS II is a mechanical gear drive system that helps prevent motor and gear damage by dampening the force and releasing the gears when the wheel is forced to stop. Since it’s a mechanical feature, SJS II does not require a restart after the wheel binds. SJS II uses a leaf spring and cam gear drive mechanism engineered to minimize vibration.

Milwaukee Tool introduced nextgeneration M18 FUEL ½-in. High Torque Impact Wrenches for construction professionals. Harnessing the power of M18 FUEL technology, the M18 FUEL ½-in.

High Torque Impact Wrench with Friction Ring provides users with a combination of

power and size.

A POWERSTATE Brushless Motor delivers torque up to 1,500 ft.-lbs. with a M18 REDLITHIUM XC5.0 Battery and up to 1,600 ft.-lbs. with Milwaukee’s new M18 REDLITHIUM FORGE XC6.0 Battery. The M18 FUEL ½-in. High Torque Impact Wrench with Friction Ring allows access in tight spaces. It features all new materials, processing and designs across its motor and electronics.

EZG Manufacturing Hogtrax Ground Protection Mats & Outrigger Pads

EZG Manufacturing unveiled two additions to its product lineup: Hogtrax Ground Protection Mats (GPM4x8) and Outrigger Pads (OP36, OP48, OP24-12 and OP2424). Designed to combat challenges posed by susceptible surfaces during winter, they are engineered for large equipment use.

Featuring a diamond cleat over a honeycomb dual-surface tread, these mats provide aggressive grip, prevent ruts and establish stable pathways. Supports weights up to 120 tons per mat (load limit based on application). Dimensions: 48 in. x 96 in. Thickness: 1/2 in. Weight: 92 lbs.

Kleemann MOBIBELT MBT 20i & MBT 24i

Kleemann MOBIBELT mobile stackers are used for logistics processes on worksites, helping move different materials for processing, site clearing and more. The machines flexibly extend the action radius of crushing and screening plants, making large stockpiles and logistics possible.

Modern crushing and screening plants, to a large extent, regulate material streams within the plant automatically.

Machine operators still have an influence on the final product and daily output.

They control the input with their excavators and wheel loaders or the loading of stone or recycling material.

Tired of paying for diesel and delivery costs?

Vanair PTO Shaft-Driven ALL-IN-ONE Underdeck Power System

Vanair introduced the PTO ShaftDriven Underdeck ALL-IN-ONE Underdeck Power System, offering six forms of power on the jobsite.

The PTO Shaft-Driven Underdeck ALL-IN-ONE Power System was designed to integrate beneath the vehicle chassis, opening cargo space.

It features a 125-cfm to 185-cfm rotary screw air compressor, 10-kW generator, 330-amp welder, 12-V, 24-V, 36-V battery boosting, 12-V, 24-V, 36-V battery charging and up to 30 gpm at 2,000 psi of hydraulic-driven power.

www.ForConstructionPros.com/Equipment

Use Mobile Solar Light Towers!

MATURE TECHNOLOGY SIMPLE OPERATION

PROVEN RUGGEDNESS

w. ProgressSolarSolutions.com Sales@ProgressSolarSolutions.com p. 888-298-6657 1108 N New Hope Rd, Raleigh, NC 27610

W O R KS I T E EQ U I PM E N T

Milwaukee Tool M18 FUEL Telescoping Pole Saw

Products

DEWALT TOUGHSYSTEM 2.0 Adjustable Work Light

The DEWALT TOUGHSYSTEM 2.0 Adjustable Work Light delivers up to 3 hours of runtime** and features two pivoting LED heads that provide 4,000 lumens (using both lights) and seven brightness levels.

The light offers users versatility through cordless and corded power options including 20-V MAX* batteries, FLEXVOLT batteries† or a standard AC outlet***.

The light can be used freestanding, stacked on TOUGHSYSTEM 2.0 toolboxes, mounted on a tripod (sold separately) or hung using the built-in folding wire hook. *Maximum initial battery voltage (measured without a workload) is 20 V; nominal voltage is 18 V ** Per charge, with both lights on maximum brightness level, using a DCB205 20-V MAX* 5Ah battery (battery sold separately) *** AC cord is not included

Metabo HPT 18V MultiVolt Tools

Metabo HPT latest additions to the MultiVolt System gives users versatility on the jobsite.

The expansion includes the new 18V Triple Hammer Bolt Impact Driver (WH18DC), 18V Driver Drill (DS18DEX), 18V 2-Piece Drill and Impact Combo kit (KC18DEXQB), 18V Reciprocating Saw (CR18DBQ4) and an 18V Grinder (G1812DFQ4).

The next-level 18V MultiVolt Triple Hammer BOLT Impact Driver, model WH18DC, incorporates a third anvil and five speed settings, including the powerful BOLT mode that tightens and loosens large bolts and nuts.

Husqvarna 525i Battery Series Products

All 525i Battery Series products are equipped with a Husqvarna E-Torq motor, which supplies the power needed to meet the performance of 25-cc petrol equivalents. A metal skid-plate over the gearbox protects the machine from daily wear and tear and accidental drops. Each machine includes ergonomically placed rubber grips.

Additionally, the series is IPX4 certified for weather resistance so users can operate the equipment rain or shine. They include: • 525iLST (String Trimmer) • 525iES (Straight-shaft Edger)

With a POWERSTATE Brushless Motor, the new, battery-powered M18 FUEL Telescoping Pole Saw maintains speed under heavy loads, delivering up to 2.35 hp of peak power. Using the power of FUEL technology, the saw reaches full throttle in under 1 second. The M18 FUEL Telescoping Pole Saw is fully compatible with the entire M18 line, now offering more than 250 power tool solutions.

Diablo Tools Amped Carbide Teeth Reciprocating Saw Blades

Diablo Tools added to its innovative range of AMPED carbide teeth reciprocating saw blades with two new blades: general purpose and medium metal blades. These blades feature Titanium Cobalt (TiCo) Hi-Density Carbide and Black I.C.E. coating, to deliver cutting life and versatility in wood, metal demolition and cutting applications.

In 2020, Diablo introduced its first AMPED reciprocating blade, Steel Demon AMPED for thick metal. Diablo is “AMPing” up its range of application specific AMPED reciprocating saw blades with the general purpose and medium metal blades for nailembedded woods, metals and plastics. Diablo’s 9 TPI Demo Demon AMPED General Purpose Carbide Teeth Reciprocating Saw Blades are designed for strut, stainless steel and other metals.

Bosch CORE18V Power Tools

Bosch Power Tools has announced the launch of 17 new power tools, adding new innovations to the CORE18V platform. The brand’s latest offerings include new options within the oscillating multi-tools and grinder tools.

Among them are: • 18V Brushless StarlockPlus Oscillating Multi-Tool • 18V Brushless Barrel-Grip Jig Saw (GST18V-50BN) • Table Saw Outfeed Support Assembly (TS1015) • 18V Brushless 4.5- to 5-in. Angle Grinder with No Lock-On Paddle Switch (GWS18V-10P) • Rotary Hammers and Attachments • 18V Brushless SDS-plus Bulldog 3/4-in. Rotary Hammer (GBH18V-22) • 18V Starter Kit with (1) CORE18V 6 Ah High Power Battery and (1) GAL18V-160C 18V Lithium-Ion Battery Turbo Charger (GXS18V-19N16)

• 525iECS (Curved-shaft Edger)

Generac SLT-D CUBE

Generac offers the SLT-D CUBE Stationary Hypercube Light Tower for jobsite illumination in remote areas, construction sites and public locations. This portable light tower is powered by a Kubota Z482 twocylinder diesel engine and equipped with four 320-watt LED lights.

The solid-state LED lights generate up to 184,000 lumens of output during use (46,000 lumens per LED light), resulting in wide-area illumination.

Aquajet Accessories for Aqua Cutter 750V

Aquajet introduced an Extension Kit, Rotolance and Hybrid Kit for the Aqua Cutter 750V with patented infinity oscillation. The Extension Kit increases the 750V’s reach for applications, such as bridges, berths, piers and wastewater plants, while the Rotolance supports surface preparation on steel bridges, roadways, pipes, tunnels and more. The Hybrid Kit 3.0 converts the diesel-powered 750V to electric when diesel can’t be used due to noise or emission requirements.

STIHL Battery-Powered Products

STIHL unveiled new battery-powered equipment for land clearing, landscaping and construction projects. Starting with zero-turn mowers, the STIHL RZA 748, STIHL RZA 752 and STIHL RZA 760 offer run time, speed and commercial-grade features with quiet and exhaust emissionsfree operation.

In addition to the three new battery-powered zero-turn mowers, STIHL continues to innovate across multiple battery-powered outdoor power equipment categories.

DEWALT POWERSHIFT

DEWALT launched DEWALT POWERSHIFT, an electrified equipment system for concrete jobsites. Designed to meet the needs of concrete professionals, the electrified line will allow users to transition away from gas-powered equipment. The system, made up of six concrete tools, uses the same DEWALT POWERSHIFT 554 WH battery and high-speed charger across all tools. They include • Battery and Charger • Plate Compactor • Rammer • Backpack Vibrator • Powerpack Vibrator • Power Screed • Core Drill and Stand • Adaptor

30

EQUIPMENT TODAY | March 2024

www.ForConstructionPros.com/Equipment

Products W O R K S I T E EQ U I PM E N T Little Beaver Mechanical Earth Drills

Aquajet Revojet 270 High-Pressure Pump

Aquajet introduced the Revojet 270 high-pressure pump, serving as a solution for smaller-scale hydrodemolition projects. It can be used with Aquajet’s most compact hydrodemolition robots—the Aqua Cutter 410 and the Ergo system—for applications such as small parking garage renovation and industrial cleaning.

Milwaukee Tool M18 FUEL Grinder

Milwaukee Tool’s M18 FUEL 4-½-in./5-in. DualTrigger Braking Grinder for construction sites includes a dual-trigger activation, a permanent side handle and AUTOSTOP kickback control.

With a trigger on the braking grinder’s main barrel and a secondary trigger on the side handle, the dual-trigger activation requires two hands on the tool for operation. The side handle can be positioned in 15 different orientations: tilting from 0 degrees to 90 degrees and pivoting to the left, top and right.

Little Beaver’s Mechanical Earth Drills feature a 360rpm operating speed, and the’ compact design allows access to areas unreachable by skid steermounted augers. They are ideal for different industries, including rental centers, fence and sign installers, landscape and building contractors, and parks and recreation departments.

The Mechanical Earth Drill is available with either a 5.5-hp or 8-hp engine and is mounted on 8-in. or 10-in. semi-pneumatic tires, respectively. Both offer a small footprint for easy access and can be used on lawns, golf course greens and other delicate surfaces without causing damage.

Gray Tools Insulated Hext Bit Socket Set

Gray Tools introduced a 16-piece insulated hex bit socket set. Made in the U.S., the set features both SAE and metric sizes, contained in a carrying case with a foam organizer. All pieces have dual-layer insulation, providing user protection up to 1,000 V in electrical applications. Gray’s new 3/8-in. drive socket set (part no. 25016-I) includes seven SAE hex head sockets, ranging from 1/8 in. to 3/8 in. and seven metric hex head sockets from 4 mm to 10 mm.

Signature Systems DiamondTrack

Makita 18V LXT 6-in. Pruning Saw

Makita released the new 18V LXT 6-in.

Pruning Saw (XCU14), adding to the expanding line of both XGT and LXT cordless outdoor power equipment. It is an option for light limb cutting and pruning applications. The 6-in. Pruning Saw features a Makita-built brushless motor. It features “tool-free” chain adjustment and a retractable guard for operation and maintenance.

All Electric.

All Power.

Unleash the power of zero emissions with the innovative Sullair E1035H Electric Portable Air Compressor.

Signature Systems introduced the DiamondTrack trackout system, a composite mat alternative to traditional rock construction zone entrances. DiamondTrack trackout mats feature a diamond-shaped terrain that delivers strength and durability in sediment dislodgement from vehicle tires as they exit construction zones.

The portable mats do not require frequent replenishment and cleanup. They eliminate Storm Water Pollution Prevention Plan compliance violations and can be used as a Best Management Practice.

Billy Goat Hurricane Z3001 & Hurricane X3001 Zero Turn Stand-On Blowers Billy Goat unveiled the upgraded Hurricane Z3001 and Hurricane X3001 Zero Turn Stand-On Blowers, which now feature a new side fill gas tank with fuel gauge, designed to improve efficiency and simplify fueling operations.

The easy side fill fuel tank significantly reduces spillage onto the unit, minimizing the opportunity for debris to enter the tank during refueling.

www.ForConstructionPros.com/Equipment

Begin your electric portable power journey at Sullair.com/E-Portables

HitachiGlobalAirPower.com

March 2024 | EQUIPMENT TODAY

31

W O R KS I T E EQ U I PM E N T

SmartSense Wafflemat

Products

Wafflemat is a foundation system for single- and multi-family residential and light commercial structures built on expansive, rocky, compressible or liquefiable soils. Wafflemat has been used in over 30,000,000 sf in foundations across the U.S., since its introduction.

Wafflemat delivers significant cost savings by reducing soil prep, concrete, reinforcing steel, and building cycle time.

DEWALT Ascent Series & Equipment

DEWALT offers Ascent Series commercial zero-turn mowers and battery-powered products for land clearing, landscaping and construction projects. Through these products, DEWALT highlights its growing resources to support landscapers electrifying their businesses.

Ascent Series Commercial Zero-Turn Mower and Ecosystem: The Ascent Series commercial zero-turn mower with Crossover Technology and electric ecosystem includes H-E-2 High-Efficiency Deck Cutting Technology, PowerEquip battery system and the GroundCommand web app. Other products include: • 60-V MAX Brushless Cordless 14-in. Top Handle Chainsaw • Next Generation of DEWALT Battery Mowers • 21-in. 60-V MAX Brushless SingleStage Snow Blower • 60-V MAX Brushless LowNoise Blower • DEWALT Pressure Washers

Terex TJ2440

Cedarapids introduced its latest addition to the Cedarapids Static Jaw Crusher series, the TJ2440.

It features a 24-in. inlet gape by 40-in. inlet width.

This single toggle jaw crusher is engineered for tight closed side settings while keeping a nip angle and crushing stroke. Its design supports operations, supplying reliable crushing.

The precision cast steel frame helps minimize maintenance.

Typical applications for the TJ2440 single-toggle jaw crusher are in a range of industries including mining, quarrying and recycling.

It is adept at handling different types of materials like ores and rock, to travel and recycled concrete. Cedarapids Jaw Crushers are known for their rugged designs and use.

DICA MaxiTrack

DICA announced the debut of MaxiTrack, a heavy-duty ground protection and site access mat for the North American market.

MaxiTrack is an access mat solution that can be deployed by hand for companies that need to provide temporary access for wheeled or tracked equipment weighing up to 150 tons.

The 1-in. thick mats measure 3 ft. x 6 ft. and weigh just 88 lbs., making them light enough to be handled by two people. Heavyduty HDPE plastic construction has the strength and rigidity to stand up to heavy equipment traffic. For projects that cover large areas, four mats can be pre-assembled and mechanically lifted into place from lifting points during deployment.

Makinex 6 kW Portable Power Box

Makinex launched the Portable Power Box (PPB) for construction.

As industries and consumers globally pivot towards sustainable energy, the PPB emerges as a solution for clean and green power.

This product is equipped with heavy-duty wheels, facilitating transport around the jobsite. It has a capacity of 6 kW of output power combined with up to 15 kWh of storage.

It powers up in seven hours and can charge with 240-V mains or solar PV. Its design includes a durable frame for storage and maneuverability. For safety, the PPB includes RCD protection, with thermal overload protection; this IP44-rated unit provides weather resistance. Its multiple connection options include three 15-A outlets and two 5-V USB-A outlets.

VMAC’S G30 AIR COMPRESSOR EMPOWERS YOU... TO GET MORE DONE

81% of service truck pros prefer rotary screw air compressors 36% more powerful than recips 30 CFM at 100% duty cycle Gets jobs done faster & easier Get The Specs: VMACAIR.com/g30power

32

EQUIPMENT TODAY | March 2024

Air Burners BioCharger

Air Burners announced the launch of BioCharger, a portable machine that turns biomass waste into energy. The company collaborated with Rolls-Royce and Volvo Construction Equipment to develop and test the product.

The BioCharger combines three steps to provide off-grid power from vegetative waste management. First, it eliminates vegetative waste using air curtain technology to minimize the harmful particulate matter entering the atmosphere. Then, it converts the residual heat energy into electric energy and stores it in a connected Battery Storage Module.

Finally, with the accompanying charging mechanism, the BioCharger allows for off-grid electric vehicle and machinery charging. The BioCharger permanently eliminates up to 20 tons of vegetative waste per hour without emitting harmful greenhouse emissions like methane and black carbon.

Makita 18V LXT Cordless Wheelbarrow Kit

Makita offers the 18V X2 LXT Cordless Wheelbarrow Kit (XUC01PTX1) for material handling and transport on construction sites. This kit includes a steel bucket secured to a frame with motor and tires, batteries, and a dual port charger.

The heavy-duty bucket has a load capacity of 290 lbs., allowing professionals to move large and bulky loads. Two forward speed options and one speed setting in reverse mode are available. The motor is powered by one 18-V LXT battery and features the option to install an additional battery for extended applications. One 18-V LXT battery provides up to 100 min. of runtime per full charge.

Milwaukee Tool M18 Rotary Lasers

Milwaukee Tool launched three new M18 Rotary Lasers and two new accessories. The lasers are impact protected with the ability to withstand 1.5-m drops and 2-m tripod tips.

The M18 Red Exterior Rotary Laser is designed for leveling on the jobsite and features manual masking shutters, which block the laser in desired directions to prevent interference with other lasers on the jobsite.

The laser features 3/32-in. at 100 ft. accuracy and one-button setup. The Milwaukee Red Exterior Rotary Laser Receiver detects the red laser line up to 2,000 ft. (diameter) for elevations. The durable rubber over-mold receiver housing allows it to withstand 2-m drops and the built-in strobe protection reduces interference from other light sources on the jobsite for measurements.

www.ForConstructionPros.com/Equipment

Products W O R K S I T E EQ U I PM E N T Husqvarna K 540i & LF 60i LAT

Hilti Cordless Tools

Ingersoll Rand 2922 Series Pneumatic Impact Wrenches

Ingersoll Rand’s 2922 Series Pneumatic Impact Wrenches are designed for heavy-duty applications in construction worksites. Available in ¾-in. and 1-in. models, the hand tools generate 2,000 ft.-lbs. of torque and 1,450 ft.-lbs. of max breakaway torque to take on tough jobs.

The impact wrenches weigh in at just 12 lbs. and measure 8.9 in. in length.

Pressure feed lubrication promotes distribution throughout the mechanism to support tool longevity.

Assembled in the U.S., the heavy-duty housing consists of all metal. They are equipped with a combo friction ring and thru-hole anvil.

Hilti North America launched new cordless tools on the 22V Nuron battery platform, adding to its wood-cutting portfolio among others. The SC 6WP22 Plunge saw is designed for cutting in wood, fiber board, drywall and solid surfaces, including straight and bevel cuts and intricate cut-outs.

The 6.5-in. saw was engineered for cutting speed and dust collection. The SM 60-22 Miter saw is a compound 12-in. miter saw designed for cutting in wood, PVC and aluminum. It has accessible controls across the entire saw and a dark shadow cut line. It features all-inone front handle controls and a small footprint.

Because all the batteries and chargers work under a single ecosystem, Nuron helps reduce complexity for tool cribs.

Husqvarna expanded its range of batterypowered machines with the launch of a compact power cutter, the K 540i, and a plate compactor, the LF 60i LAT. Both machines are part of the company’s BLi-X 36-V battery offering for hardscaping and construction.

The K 540i is a new 10-in. battery power cutter with an adjustable blade guard and cutting depth up to 4 in. (100 mm). For performance, the K 540i power cutter is supplied with Husqvarna diamond blades.

The LF 60i LAT is the newest product to run on the BLi-X battery system. In addition to the new power cutter and plate compactor, the BLi-X battery system also features the DM 540i core drill, the DE 110i dust extractor, the BV 30i screed for concrete placement, the WT 15i water tank and the WL 8i work light.

Ligchine SCREEDSAVER PRO PLUS

Ligchine announced the launch of its latest product, the SCREEDSAVER PRO PLUS. This product is designed for concrete flatwork in construction projects.

The PRO PLUS uses a rotating undercarriage for versatility and speed when operating in small or congested areas. With an increased auger size, long boom reach and wide head, the PRO PLUS supports several applications from warehouse floors to exterior multiple slope pavements. These features are achieved while keeping the size and weight of the machine compact, providing the ability to transport the machine with a ¾-ton truck and trailer. The PRO PLUS has SCREEDSHIFT technology, first developed on the MAX PLUS, allowing the operator to move the screed head around obstacles and penetrations without rotating the head.

General Equipment TEMPBUST-R Ventilation Fans Milwaukee Tool MX FUEL Equipment System

Milwaukee Tool introduced six solutions to the MX FUEL Equipment System lineup. This system, which now has more than 25 solutions, eliminates exposure to emissions and tripping hazards. This recent system expansion includes the MX FUEL REDLITHIUM FORGE XC8.0 and HD12.0 Battery Packs and a new Super Charger with COOL-CYCLE capabilities.

The solutions include the MX FUEL 1-hp, 2-in. Submersible Pump, which provides portability to pump without the need for a generator; the MX FUEL High Cycle Concrete Vibrator, which provides consistent consolidation by sustaining 11,500 vpm in concrete; the MX FUEL ROCKET Dual Power Compact Tower Light, which requires 75% less space to store and transport compared to the MX FUEL ROCKET Tower Light/Charger; the MX FUEL Portable Battery Extension, which connects to MX FUEL equipment, removing the weight of the MX FUEL battery pack and more.

General Equipment Co. offers three models in the TEMP-BUST-R Ventilation Fan Line: the 30-in. (762-mm) diameter EBF30, the 36-in. (914.4-mm) diameter EBF36 and the new 42-in. (1,067-mm) diameter EBF42. These fans feature direct-drive, three-speed motors and are designed for general construction, demolition, oil and gas and other nonhazardous industrial work environments.

All TEMP-BUST-R units include 115VAC, 60-Hz electric motors and offer three fan speeds. The EBF30 model is powered by a 0.5-hp motor and outputs between 4,200 cfm to 6,000 cfm. The larger EBF36 uses a 0.75-hp motor and outputs between 9,200 cfm and 11,200 cfm. The EBF42 model is powered by a 0.75-hp motor and achieves between 16,500 cfm and 18,500 cfm. The line also features enclosures constructed of lightweight, heavy-duty double-walled, high-density polyethylene that are UV-resistant and corrosion-proof.

MORE JOBS. MORE MILES. MORE DEADLINES MET. Every job comes with a unique set of circumstances. But the two things all jobs have in common are concrete and deadlines.

Which is why we’ve designed our drills to be the fastest, most accurate, operator-friendly machines on the market, keeping your crew safe and on pace for more jobs. No matter the deadline.

STIHL TSA 300 Cutquik

The TSA 300 STIHL Cutquik is the newest professional battery-powered cut-off machine powered by the STIHL AP battery system. This compact tool can cut through a 4-in. concrete slab.

The cutting performance of the cut-off machine is comparable to gasoline-powered cut-off machines, with the well-balanced powerhead. The saw features low vibrations and produces clean cuts. Optional use of the SB 90 N cutting wheel is designed to reduce the noise of the machine by approximately half when compared to other STIHL diamond wheels. Optional use of the SB 90 N cutting wheel is also designed to provide faster cutting by 15%.

www.ForConstructionPros.com/Equipment

Designed to Beat Deadlines.

ezdrill.com ©2022 E-Z Drill, Inc.

March 2024 | EQUIPMENT TODAY

33

FLEET MANAGEMENT

Read More at eqtoday.co/fleetmgmt

Products

Tenna TennaCANbus Tracker & Custom Inspections

SolidBoss LiftBoss Tires for Aerial Work Platforms

Although a directional LiftBoss tire (model D228 R4) is available for customers who prefer a traditional option, the new nondirectional tires (model ND-226) offer a fresh concept for aerial work platforms.

With only one tread pattern for both leftand right-hand tire and wheel assemblies, the non-directional option simplifies tire selection and installation.

The rubber compound in the tires helps minimize chunking and caters to operation on gravel, mud and rubble.

The tires can also be foam filled to help minimize downtime from punctures experienced on the jobsite.

Nauto Telematics Solution

Nauto announced the new telematics capabilities offering visibility into vehicle tracking, utilization, misuse and maintenance planning. Nauto’s latest offering delivers telematics alongside AI-powered driver and vehicle safety capabilities, on a single device and a single software platform.

This solution curbs the proliferation of devices within crowded commercial vehicle cabs. In addition, Nauto added safety capabilities with new detectors designed to provide distinct alerts that differentiate between pedestrians, bicyclists and motorcyclists, when there is a risk detected of colliding with one of these vulnerable road users.

DPL Telematics AssetView Mid Tracking System

AssetView is a solution for wireless monitoring and remote tracking of powered or unpowered assets to support logistics, manage inventory and curb theft. The small, portable GPS unit is self-contained and may be hidden on assets.

AssetView Mid allows managers to remotely monitor an asset from an Internetbased software package and mobile app. Additional features include: • No external wiring or antenna: Unwired attachment to assets in a “hide and track” installation • Internal battery power: Powered by three AA lithium batteries, customer replaceable • Long battery life: Self-powered up to 10 years on daily updates, up to 3.5 years on more detailed tracking • Wireless, two-way communication: Activate recovery mode or set movement alerts over the air from the software or mobile app • Little to no sky view required: May be hidden inside or under most assets • Waterproof IP68 and IK07 rated designs • Tip and impact detection: Notifications of potential safety issues or asset abuse • Integrated Bluetooth gateway: Detects nearby Bluetooth tags for extended asset tracking and monitoring • Compact and portable • GPS, GLONASS, Galileo, QZSS and Beidou positioning: Location features use multiple satellite constellations • Global cellular coverage: Track assets across borders

Tenna’s new hardware product for heavy equipment allows for tracking third-party powered accessories. Tenna also released an add-on product: Custom Inspections.

Tenna’s new TennaCANbus tracker is an updated way to track heavy equipment.

By installing the TennaCANbus on heavy equipment, users can now track and monitor idle time, fuel consumption, asset information, engine information, battery level, fault codes and decoded messages, environmental data and tracker analytics—in addition to the location, use and maintenance data previously collected.

TennaCANbus enables construction equipment managers to make decisions about rentals, replacements, preventative maintenance and resource management.​The tracker also makes it possible to track external power take-off, which enables the use of an asset’s engine power to drive added equipment or perform specific tasks.

Ford EV Chargers for Commercial Fleets

Ford Pro revealed new charging hardware added to its suite of endto-end solutions for commercial customers to transition their fleets to electric. The new Series 2 AC Charging Station 80-amp and expanded DC Fast Charger options are designed for commercial vehicle use and equipped with new features.

Coupled with Ford Pro’s charging management software, the company provides an integrated EV charging solution for Ford and non-Ford electric vehicles. Ford Pro’s BEV Fit team offers available complimentary consulting for customers to help identify available incentives, consult on charging site design and construction, and collaborate with local utilities on energy needs.

The Series 2 AC Charging Station 80 amp comes with features that help improve the charging experience at the workplace for fleet operators.

Vanair EPEQ Idle Management System

Vanair unveiled the latest addition to the EPEQ Electrified Power Equipment line, EPEQ IM Idle Management System. EPEQ is a comprehensive, patent-pending, endto-end system offering the components needed for a green technology system.

It allows vehicles to be automatically turned off while still powering equipment like air compressors at the jobsite. This is achieved with no emissions and brings reductions in: noise, heat, weight and more.

Additionally, the EPEQ Idle Management System features Vanair’s latest HVAC system for cab climate control and telematics. It automatically turns off the vehicle’s engine when it is not in use rather than allowing the engine to idle.

• Month-to-month agreement: No long-term contract, deactivate or reactivate anytime

GPS Trackit E-Commerce Platform

Trackunit Emissions Reporting Software

GPS Trackit has launched an e-commerce platform, offering a wide range of AI fleet management, telematics and video solutions. It caters to the demand for reliable fleet tracking solutions in a marketplace format.

The new e-commerce platform enables individuals to browse, select and buy GPS trackers and video telematics products. With an intuitive interface and product information, the platform helps customers find the solution they need under flexible options and decide if they want to purchase by themselves or receive guidance from GPS Trackit’s network of experienced Fleet Advisors.

34

EQUIPMENT TODAY | March 2024

Trackunit launched its new Emissions Reporting software, which will support fleet owners’ ability to meet CO2 targets and acquire contracts with sustainability criteria.

Emissions Reporting harnesses synthesized machine metadata and individual equipment profiling to unlock fleet emissions reporting for off-highway machines and equipment. The new software will minimize ‘guesstimating’ emissions numbers. Government- or state-mandated projects typically require emissionsreporting stipulations that put an onus on contractors to demonstrate they are not just tracking but reducing emissions.

www.ForConstructionPros.com/Equipment

FLEET MANAGEMENT Products

Panasonic TOUGHBOOK 55 Mk3 a

Stellar LM220M Poly Lube Skid

Stellar Industries’ LM220M Poly Lube Skid is designed to support lubrication services for mechanic trucks with its improved contamination control, reduced leak points, serviceability and ability to be lifted by a crane. Stellar’s LM220M Poly Lube Skid was engineered to prevent contamination of lubricants or any other substances it contains.

It features fewer potential areas for leaks. This reduction decreases the risk of spills and fluid loss, promoting safety and environmental compliance.

SafeGauge MultiTool Pro

The SafeGauge MultiTool Pro with wireless Bluetooth enables maintenance technicians to conduct routine inspections from a safe distance of up to 50 m (164 ft.). This product is designed to Eliminate Live Work. The wireless testing solution supports safety measures and heavy vehicle maintenance processes.

By eliminating the need for technicians to work close to operational heavy vehicles (inside the machine footprint), technicians can remain safe during operation and maintenance procedures. The MultiTool Pro allows technicians to connect to 12 SafeTest gauges simultaneously, from up to 100 m (328 ft.) away.

The third generation of the TOUGHBOOK 55, the Mk3, harnesses the power of the 13th Gen Intel Core i5 and i7 Processor with Intel vPro Technology and up to 14 cores. It also features secondary NVMe OPAL SSD, delivering high bandwidth and low latency for contractors handling complex blueprints or automotive technicians performing intricate vehicle diagnostics and maintenance.

Wi-Fi 6E and Bluetooth 5.3 support connection speeds and options so workers can retrieve, analyze and transmit data in real time. These features are for utility professionals conducting onsite inspections, managing infrastructure or responding to emergencies.

The latest version is equipped with 92-dB speakers that include dual array microphones for those operating in loud environments and harnesses artificial intelligence to reduce background noise pickup.

POWER TO MAXIMIZE PRODUCTIVITY Offering more power with less complexity and less weight.

This engine delivers the productivity you need to keep your equipment running. Proven in a wide range of industrial applications, its power increases to 326 hp / 243 kW enabling replacement of engines with higher displacement with no impact on productivity

Sage Oil Vac VacBuilt System

Sage Oil Vac unveiled the new VacBuilt system, serving as ready-to-use mobile service solutions.

The first offering is a waste oil tank for service technicians who don’t require a new bulk oil tank when completing preventive maintenance on vehicles and heavy equipment. A single waste oil collection solution captures fluids from different vehicles using different types and grades of oil. This VacBuilt product combines a 30-gal. or 60-gal. horizontal used oil tank with mounting options for a hose reel and controls.

A removable mounting plate provides flexibility to mount the hose reel and controls to the top of the tank, or they can be mounted remotely, depending on the configuration for the application.

www.ForConstructionPros.com/Equipment

©2024 Cummins Inc.

March 2024 | EQUIPMENT TODAY

35

F L E E T M A N A G E M E N T Products Danfoss A+ Software

Danfoss Power Solutions formalized its software offering for autonomous off-highway machinery. Designed for in-house engineering teams at original equipment manufacturers and distributors, A+ software supports development of autonomous technology.

A+ software consists of preprogrammed and pretested software blocks built into the Danfoss XM100 autonomous controller hardware. Each block covers key areas such as perception, positioning and navigation.

It allows users to add autonomous functionality by integrating the blocks into their machine applications, eliminating the need to develop software from scratch.

John Deere Self-Repair Customer Solution

John Deere launched a self-repair solution, available initially in the U.S. through its Equipment Mobile app. The solution allows customers to remotely download secure software updates directly to embedded controllers on compatible 4G-connected John Deere equipment.

Using their John Deere Operations Center account, customers operating compatible 4G-connected machines can use this solution to complete secure software updates directly to an embedded controller through an interface using the Equipment Mobile app.

This is in addition to other customer maintenance and repair information added to Operations Center and Property Center, including operator’s manuals, warranties and product improvement programs specific to their equipment.

Remote.It ScreenView

Remote.It announced the release of ScreenView, its white-label solution for remote screen sharing.

ScreenView brings remote access and visibility to IT professionals and IoT or device manufacturers in the construction industry.

With ScreenView, support teams can view and control Android devices from any browser (any PC or mobile device). ScreenView provides the ability to connect remotely to any Android device from any browser interface. With the solution, teams can use an external display, share their screens, troubleshoot issues and collaborate in real time. The white-label product is for custom branding when reselling a service or can be embedded in existing solutions.

OTR TR-34 Turf Tire

OTR Engineered Solutions’ (OTR) TR-34 tire for farm tractors and ride-on mowers offers performance on grass, mud and loose soil, while reducing the risk of turf damage and soil compaction. It features a non-directional design that optimizes tread wear, ride comfort and traction in both directions.

The tread pattern is a hybrid between turf and industrial styles. The treadto-void ratio on the TR-34 tire promotes even pressure distribution throughout the contact patch, which reduces the risk of turf damage and soil compaction.

Siped R1-style shoulder lugs supports traction in mud and loose soil. Also, strategically placed mud breakers and rock ejectors provide clean-out. Four tire sizes are available: 16 x 7.50-8, 18 x 8.50-10, 24 x 12.00-12 and 26 x 12.00-12.

Vanguard Motors & Motor Controllers

Briggs and Stratton expanded its Vanguard electrification portfolio to include a new series of motors and motor controllers. With the launch of its own motors and motor controllers, Vanguard will be able to offer original equipment manufacturers components that deliver a full battery system solution.

The company’s new MVG Series Motors and MC Series Motor Controllers include different power options to meet voltage needs across equipment sizes. The MVG Series includes the MVG1500, MVG2200, MVG3000 and MVG4000 Motors.

The MC Series includes MC2000, MC4000 and MC8000 Motor Controllers. These new motors and controllers will go into production in 2024.

Chevron Rykon

Chevron announced Rykon, a new overbased calcium sulfonate complex grease, to its refreshed line of products.

Rykon supports the need for highperformance grease for equipment on construction sites.

With its formulation, Rykon will round out Chevron’s grease offering with a grease formulated for heavy-duty and extreme pressure applications. This calcium sulfonate complex-based grease also provides an alternative option to lithium-based thickeners.

Rykon is designed to help increase equipment longevity and extend lubrication intervals. The overbased calcium sulfonate complex grease delivers oxidation and thermal stability with water performance to protect equipment.

36

EQUIPMENT TODAY | March 2024

Yokohama Galaxy MFS 101 SDS

Products F L E E T M A N AG E M E N T FleetWatcher Small Tools & Attachment Tracking

Yokohama OffHighway Tires Galaxy MFS 101 features solid construction, a heatdissipating design and a steel bead design to transfer torque with reduced slip. The tire is available in 28 sizes, for rims ranging from 8 in. to 15 in.

The two circumferential grooves support steering and cornering.

The shoulder lugs of the MFS 101 are spaced for traction, cornering and bleeding off heat.

The shoulders of the MFS 101 are siped all the way to the edges for grip on smooth surfaces. Compound uniformity supports stability.

A heavy-duty central tie bar stabilizes and reinforces the tread for strength under stress. The MFS 101 has a steel bead package across the entire rim area to reduce wheel slip.

FleetWatcher introduced a new telematics functionality for its construction telematics platform—Small Tools and Attachment Tracking. With the FleetWatcher User App, users can search for an individual asset, see a group of assets on a specific project or look at all assets in a certain class.

This new functionality shows customers where the assets are, the last time someone was near them, what job they are on and if they have moved. Armed with the item’s last location, customers can use the scanning tool to see if it was accidentally left on the jobsite, preventing loss and allowing fast retrieval. Durable asset tags with Bluetooth technology along with the FleetWatcher User App are used for implementation.

A LONG WAY

TOGETHER

Spireon Flex Battery Tracker

Spireon’s newest battery-operated tracking device, the Flex Battery Tracker, can be used for different equipment on construction sites such as trailers, storage containers, vending machines and more.

The Flex Battery Tracker features tamper detection and GPS or cellular registration, supporting the security and location of assets, particularly machinery and equipment stationed for extended periods. The product is a reliable GPS tracking device for asset tracking and recovery, as well as monitoring trailers, whether owned or leased.

With a battery life of 5 years, the Flex Battery Tracker facilitates continuous and reliable operation for an extended period.

Fleetio Fleet Maintenance Management

Fleetio has four new features for fleets: Tire Management, Warranty Management, Sensor Data Snapshots and Enhanced Service Tasks. Tire Management allows fleet managers to gain real-time insights into tire health and performance, tracking tread depth, air pressure and usage data, supporting DOT compliance.

The Warranty Management feature tracks warranties, alerting mechanics about applicable policies. Sensor Data Snapshots leverage sensor data to proactively detect and address potential problems before they escalate.

Enhanced Service Tasks with Parts and Labor enables work order creation.

It allows users to link service tasks to specific parts and expected labor hours, eliminating manual data entry.

WHEREVER YOU ARE, BKT IS WITH YOU No matter how challenging your needs, BKT is with you offering a wide range of OTR tires specifically designed for the toughest operating conditions: from mining to construction sites.

Sturdy and resistant, reliable and safe, able to combine comfort and high performance.

BKT is with you, even when work gets tough.

BKT USA Inc. 202 Montrose West Ave. Suite 240 Copley, Ohio 44321 Toll free: (+1) 888-660-0662 - Office: (+1) 330-836-1090 Fax: (+1) 330-836-1091

F L E E T M A N A G E M E N T Products

Trackunit Next-Gen Access Management

Trackunit’s access management solution builds on a platform that will put fleet owners in control of who has access to machinery and help make construction sites safe. The second-generation solution has simplified the process of managing access.

Because access will become more digitalized, it will minimize the need for administration-heavy manual processes. In addition, it enables fleet owners to comply with safety standards in line with regulatory requirements.

Logbooks will also show who operated the equipment and for how long, supporting business planning that might, for example, enable equipment sharing and coaching on operator behavior.

Gauge Telematics

The Gauge Telematics solution is designed to help businesses leverage technology to support maintenance, operations and equipment management.

Gauge Telematics is equipped with mobile features, enabling maintenance teams to manage tasks on the go.

Technicians can access real-time information, update work orders and communicate through their mobile devices.

Gauge Telematics introduces the ability to consolidate multiple maintenance requests within a single work order.

This functionality reduces administrative efforts, minimizes downtime and promotes resource allocation.

By enabling technicians to address tasks within one workflow, businesses can facilitate issue resolution.

BFGoodrich HD-Terrain T/A KT

BFGoodrich Tires’ HD-Terrain T/A KT tire for off-road applications and rugged work areas is engineered for intense conditions and tested in extreme environments.

Features include chip-andtear durability and sidewall toughness.

HD-Terrain has an all-new tread compound designed to resist chipping and tearing. HD-Terrain T/A

KT tire has “Mud-Phobic” bars and a serrated shoulder design.

The tire will allow you to plow through gravel and mud. The tire also features CoreGard technology, which offers toughness against sidewall splitting.

• Open block design creates excellent self-cleaning • Aggressive tread design creates reference level lateral and traction grip • New compound and more rubber in the tread creates better grip and increased lifetime • Re-designed carcass structure gives more lifetime and better stability • Siped non-directional thread design with pre-marked stud position

NOKIA NTY RE S .CO M/h a k k a p e l i i t t a l o a d e r

38

EQUIPMENT TODAY | March 2024

Chevron Synthetic Blend & Full Synthetic Products Western Global AutoDEF

Western Global’s AutoDEF is an auto-fill diesel exhaust fluid (DEF) tank pump that extends run times by refilling tanks with DEF automatically. The AutoDEF senses when the tank is in a dry state and starts pumping DEF as and when needed, eliminating the need for someone to be onsite at all times.

This field-tested technology includes a sensor in the nozzle to make sure it is correctly seated. A purge function keeps the lines clear and prevents crystallization.

Designed for a range of equipment, the AutoDEF keeps DEF protected from various elements, with the fluid and cables running through an insulated cover.

Chevron will simplify its Delo Heavy Duty Engine Oil (HDEO) product line by focusing its portfolio on synthetic blend and full synthetic products. This move provides access to reliable product supply of synthetic blend and synthetic options for customers.

In a rolling transition that began in January 2024, Chevron is sunsetting three HDEO products—Delo 400 SDE SAE 10W30, Delo 400 SDE SAE 15W-40 and Delo 400 XLE SAE15W-40—replacing them with Delo 400 XLE SB SAE 15W-40, a new high-performing synthetic blend. This new synthetic blend will complement Chevron’s existing Delo 400 XLE 10W-30.

Chevron’s new portfolio of synthetic blend and synthetic products can be used in all applications where Chevron’s conventional heavy duty engine oils were used.

TECHNOLOGY

Read More at eqtoday.co/techtrends

Products

Teletrac Navman IQ Camera and Video Telematics

Husqvarna Pro Insider

Husqvarna launched Pro Insider, a webbased learning management system providing users with interactive learning opportunities for professional products and solutions, in addition to industry best practices. Husqvarna Pro Insider offers short video courses on topics including PPE, equipment use, and product technology and accessories.

To foster engagement with the courses, Pro Insider leverages “Watch and Earn.” For every course completed, users earn coins that can be redeemed for merchandise within the Husqvarna store. Each self-paced course is less than 5 minutes. The system is designed for busy professionals to learn on their own schedules.

Trimble X9 3D Laser Scanner

Trimble announced the launch of the X9 3D laser scanning system, a new reality capture solution for surveying, construction and engineering professionals. The X9 is built on Trimble’s laser scanning technologies, engineered for performance in different environments using Trimble X-Drive technology for automatic instrument calibration, survey-grade self-leveling and laser pointer for georeferencing.

The X9 features auto-calibration which eliminates the need for annual calibration. In addition, the X9’s self-leveling capability has a wide compensation range.

The AI-powered, dualcamera dash cam is integrated with Teletrac Navman’s TN360 fleet management software to give fleet owners a unified view of their video and telematics data. The solution enables customers to understand events and support driver safety through informed coaching. The fully connected IQ Camera uses sensors and video AI to review driving footage and understand behavior. Together with TN360, the IQ Camera pulls driver performance data into a single location, giving fleet managers a full view of performance so that they can implement reward programs and identify areas for improvement.

CM Labs Wheeled Excavator Simulator Training Pack

CM Labs Simulations has announced the launch of its Wheeled Excavator Simulator Training Pack. The training pack features a live quick coupler attachment change training feature and includes a standard bucket, narrow bucket and tiltrotator attachment. Operators can train safely in dense urban settings, by experiencing the mobility, speed and maneuverability of its real-world counterpart. The Training Pack supports organizations in the Utilities market addressing industry issues such as operator safety, sustainability and equipment maintenance.

Teleo Autonomous Hauling Technology

Teleo launched autonomous technology for construction vehicles and work areas. The autonomous capability is tramming or autonomously hauling materials from one point to another.

Operators driving dump trucks spend the majority of their time tramming from one point to another. By automating tramming, one operator can run multiple machines simultaneously. The physical dumping of materials will be handled remotely by one operator controlling multiple machines from a command center.

Topcon LN-50 3D Laser

Topcon Positioning Systems announced the launch of the LN-50 3D laser, the latest addition to the LN layout navigator family of instruments. Intended to be a solution for digital layout, the LN-50 has a 50-m (164-ft.) range as compared to the longer-range, fullfeatured LN-150.

The new LN-50 is designed specific to homebuilders; mechanical, electrical, plumbing trades; and concrete contractors to achieve high-speed precision in measuring and layout work, mitigating the risk of errors.

The LN-50 works with Topcon Digital Layout building construction software.

ADP Workforce Now for Construction

ADP Workforce Now for Construction is an all-in-one HCM software provides construction firms with the tools needed to run payroll, manage HR and recruit and develop workers. The software tracks and manages regulatory requirements for single or cross-state operations. It automates applying prevailing wage and fringe rates for government funded projects and manages and assigns union wages and benefits. The platform creates Certified Payroll and Union reports and transfers job cost and general ledger data to existing ERP. The program tracks time and attendance in real time for employees working on multiple jobs and performing different roles.

Fecon Fusion Platform

Fecon launched Fusion, a telematics platform that uses dynamic features such as automatic machine calibration, location services and performance tracking, for mulching operations. Fusion automatically calibrates the attachment to the carrier in realtime to optimize performance, minimize downtime and expand the machine’s lifespan.

Fusion is initially available on high-flow Bull Hog and Blackhawk attachments. Fecon brings intelligent control technology to a new level in the mulching industry. Fusion automates mulcher set up through its Plug n’ Play design that eliminates manual setup and tuning. With this feature, customers can attach their mulcher to any compatible carrier and run the machine. The mulcher is optimized to the carrier and working conditions at all times.

Imint Vidhance for Remote Assistance

IMINT Image Intelligence AB launched Vidhance for Remote Assistance, a new suite of subscription-based tools designed to transform the quality of video content captured by remote assistance devices used in the construction industry.

The new solution consists of the Vidhance Premium Video Stabilization feature and the all-new Vidhance Click and Lock feature, supporting remote viewers to select, track and focus on on-screen objects. The Vidhance Premium Video Stabilization feature eliminates shakiness in real time by keeping the frame stable and the horizon level for video captured on handheld, head-mounted or body-worn cameras, while correcting for lens distortions. The software achieves this by leveraging data from the camera’s motion sensors to calculate stabilization frame by frame.

www.ForConstructionPros.com/Equipment

March 2024 | EQUIPMENT TODAY

39

T EC H N O LO GY Products CM Labs Intellia Instructor Training Software

CM Labs Simulations’ Intellia Instructor is a software program serving as a component of a nextgeneration training management system. Intellia Instructor works in concert with the CM Labs suite of Training Packs and Vortex Training Simulators to provide a methodology for organizations in the Construction and Utilities market.

CM Labs virtual training systems help address industry issues such as operator safety, sustainability and workforce management. The shift from operator training on real equipment to simulation training can help mitigate risks.

BILT Project Sharing

BILT offers project sharing in its app, a collaboration feature designed to support on-the-job enablement. With the new project sharing function, technicians and tradespeople can: • Enable teamwork: Users can invite colleagues to work together on complex projects • Collaborate in real-time: Teams can synchronize efforts on the job, eliminating communication gaps

eSUB QuickBooks Integration

eSUB Construction Software’s cloud-based project platform, eSUB Cloud, will offer integration with QuickBooks Online from Intuit. The integration eliminates the need for manual data entry and supports timecards and financial data.

It also minimizes errors because of duplicate entry of information from other sources, leading to more reliable financial reports. The integration provides realtime insights, keeping accounting and project management teams synchronized with direct access to project costs, budgets and financial data.

With the new features, eSUB Cloud users can now send approved timecards directly to QuickBooks Online with a click.

• Follow 3D interactive guidance: Images and animations on the 3D app can be adjusted to support an individual user’s perspective

Doosan Bobcat Autonomous Electric Machines

Doosan Bobcat showcased two new autonomous electric machinery for construction projects: AT450X articulating tractor and RogueX2 concept loader. The battery-powered AT450X combines Bobcat’s articulating tractor with Agtonomy’s software and embedded-computing technology to support emissions-free and autonomous operation, thus allowing farmers to automate tasks.

Bobcat also showcased the next evolution of its RogueX concept loader with the all-electric and autonomous RogueX2. Designed with wheels instead of tracks to optimize battery runtime, the RogueX2 features axial flux motors that give the machine pushing power.

Together, the RogueX and RogueX2 concept loaders have garnered many new patents pending.

• Contribute feedback: BILT garners ratings, reviews and user feedback and provides managers with analytics and insights to identify pain points and potential delays

Haulhub EDOT Platform

HCSS Copilot AI

EDOT brings together a suite of features that support roadway construction management and sustainability. The EDOT platform is now evolving into a platform companion for the public works sector.

It builds off the genesis of e-Ticketing into new areas such as work zone safety, scheduling, vendor submittals, environmental product tracking, compliance reporting and digital inspection. The EDOT platform is designed to meet the needs of DOT agencies while catering to the demands of contractors who require a direct and collaborative link with these agencies in future projects.

Communication and cooperation between owner and contractor sets the stage for a future where collaboration and transparency prevail throughout the project lifecycle.

HCSS announced the launch of HCSS Copilot, a natural language AI assistant in the civil construction marketplace. HCSS Copilot provides real-time interactive support, enabling HeavyJob customers to gain insight and draw on personalized data.

HCSS will soon integrate customer-specific data within Copilot so HeavyJob users can receive tailored, instantaneous and actionable insight.

Wearin’ IoT Fall Detection

Wearin’ developed a solution connecting workers with teams working on production and remote areas of construction sites. Based on Internet of Things technology and powered by AI, the solution comprises two platforms, one physical and the other digital, communicating with each other in real time.

A device attached to the worker’s vest, called the Wearin’ Brain, embeds three safety alert and detection systems: one to alert the control center via the Wearin’ SOS button that can be activated manually in the event of an accident, an inertial sensor that can automatically detect a fall (in case the alert cannot be raised manually) and GPS to pinpoint the location of the worker.

Data and alerts are sent and collected via the cloud to the Wearin’ dashboard integrated into the central monitoring system, allowing the control center to take appropriate emergency and rescue measures according to the alerts they have received.

40

EQUIPMENT TODAY | March 2024

Ricoh-Cupix Integration of RICOH THETA X Camera

Ricoh announced new capabilities for the RICOH THETA X 360-degree camera. The company partnered with Cupix to integrate and support CupixWorks and CupixVista with the RICOH THETA X, offering 3D spatial digital twin imaging solutions for professionals.

By harnessing the synergies between Ricoh cameras and Cupix’s hardware, software and services, enterprises can anticipate a digital twin solution, even for megaprojects.

A feature of the RICOH THETA X 360-degree camera is its integrated GPS technology, offering location and mapping capabilities. Additionally, its image quality, even in low light conditions, supports visualization. This technology paved the way for Cupix’s nextgeneration 3D dollhouse point clouds.

www.ForConstructionPros.com/Equipment

Products T EC H N O LO GY IDS GeoRadar Concrete Inspection Solutions

i.safe MOBILE RealWear Navigation 21

i.safe MOBILE and RealWear launched the RealWear Navigator Z1 for construction professionals.

The product is designed to be an intrinsically safe and ATEX/IECEx certified head-mounted wearable.

The Navigator Z1 is designed for use in hazardous areas for troubleshooting equipment via remote expert guidance, virtual training and for e-workers using Field Services Management or inspection data management systems. The Navigator Z1 is powered by a chipset with a built-in AI engine.

It lays the foundation for RealWear’s broader AI Core vision for frontline workers. Navigator Z1 has voice recognition for handsfree use up to 100 dBA, a feature for noisy work environments. The Navigator Z1’s modular design enables customization with addons like an IS-certified thermal camera and a swappable battery.

Connectivity with Wi-Fi 6 and an optional 5G solution for private and secure enterprise connectivity.

IDS GeoRadar launched the C-thrue XS, a handheld, dual polarization GPR scanner for concrete inspection, and NDT Reveal, an integrated software solution for analyzing and managing subsurface data.

The new solutions enable construction teams to scan concrete structures, detect elements beneath the surface and make informed decisions about where to cut or drill safely. Building on the smaller C-thrue, launched in 2018, C-thrue XS is designed for use in hardto-reach areas where construction professionals can maneuver the compact device. Weighing less than half a kilogram makes the scanning process a manageable experience.

Thanks to its dual-polarization capability, users can do comprehensive scans in one go. This feature allows the scanner to send and receive signals in horizontal and vertical orientations. With automatic real-time processing, the device highlights targets and potential problem areas.

Trimble Siteworks Machine Guidance Module

Trimble introduced the Trimble Siteworks Machine Guidance Module, extending the capabilities of Trimble Siteworks Software from surveying and layout to support on-machine excavator guidance and operator assistance.

With the addition of the new software module, contractors can use the same rugged Site Positioning Systems hardware and software to perform tasks on the jobsite, including surveying, machine guidance, in-field design and reporting.

Designed specifically for small site and utility contractors, the Siteworks Machine Guidance module allows users to move the system between multiple excavators and jobsites as an accessible and entry-level combination machine guidance and construction surveying solution. Current Siteworks users can use their existing technology on-machine quickly and easily, with the addition of a simple-to-install machine kit and the software module.

www.ForConstructionPros.com/Equipment

March 2024 | EQUIPMENT TODAY

41

T EC H N O LO GY Products Hilti BIM-Driven Integrated Project Solutions

Hilti showcased its BIM-driven Integrated Project Solutions (IPS), a suite of services designed for different aspects of construction projects from design, construction and operation phases.

As a solution, the IPS can help manage issues such as space constraints, loading conditions and the application of relevant building codes related to projects, supporting coordination and scheduling. By combining pre-fabrication services, logistics, jobsite automation and digital solutions, they help drive construction practices.

CostCertified Automated Scheduling

CostCertified unveiled its newest tool, Automated Scheduling. With the new solution, contractors can handle and visualize their projects. Automated Scheduling offers users a drag-and-drop interface that allows them to divide their projects into distinct phases, crafting a coherent project vision. Beyond planning, contractors can visualize their project’s progression even before initiation. This feature keeps projects on track, aligning with expected outcomes.

Avvir New Tech Products

Avvir’s suite of new product enhancements include Clash Results, User Generated Inspect Reports and Project Metrics.

The products are all designed to enable construction teams to simplify reporting and identify potential issues to prevent errors and delays in the construction process.

Additional product enhancements include selfuploading for existing BIM scans and updated metrics reporting functions. Clash detection analysis, an aspect of quality control, has grown because of the emergence of building information modeling and reality capture technologies.

GeoPolymer International 3D Printers

Geopolymer International offers the MaxiPrinter and “Sophmore” Mini Truss Printer, serving as large 3D-printing solutions and equipment for builders.

The MaxiPrinter is a mobile, compact and all-terrain 3D printer that can be used for indoor and outdoor construction.

It can print with an internal diameter minimum of 16.4 ft. and a maximum of 45.27 ft. for a structure of 12.63 ft. in height. It has an average printer speed of 3.94 in./s to 5.91 in./s and an average maximum vertical construction speed of 0.98 ft./h to 1.97 ft./h, though the parameter is defined by the material used.

Aedo Procore App Marketplace

Aedo has announced it has joined the Procore App Marketplace, where customers can access its products.

Procore is a provider of construction management software. Procore launched the Procore App Marketplace in 2016 as an online hub for third-party integrations and custom applications, modernizing the everyday life of the construction professional. This collaboration will allow Procore users to align their construction technology and data use to business objectives. By tailoring the Procore platform to meet the distinct needs of each client, construction professionals can harness technology and unlock the potential of their Procore platform.

Command Alkon Command Cloud & Material Supply

Command Alkon revealed its nextgeneration platform, Command Cloud and Material Supply. Command Cloud serves as the latest evolution of the company’s CONNEX platform, featuring consumer-grade technological capabilities with reliability, scalability and NIST certified security. Engineered as a technology ecosystem to supercharge heavy building materials operations, Command Cloud delivers the value of cloud systems, including integrations through an API-first approach, and modern user interface design.

www.ForConstructionPros.com/Equipment

ZQuip Modular Energy Solution

ZQuip, part of Moog Construction, launched its ZQuip modular energy solution to convert diesel-powered construction fleets into zeroemission machines that create all-electric jobsites. The ZQuip energy kit includes: 70-kWh and 140-kWh Energy Modules; a conversion kit consisting of a battery harness, electric motor and AI thermal management; and IoT and connectivity to monitor a fleet’s activities and battery-life.

Once project managers determine the work to be done, they match the fleet’s energy needs with battery capacity.

TRUCKS & TRANSPORTATION

Read More at eqtoday.co/trucksandacc

Products

Mack Trucks MD Electric Truck

Mack Trucks’ Mack MD Electric is the company’s first electric vehicle in the medium-duty segment of the trucking industry. The addition of a zero-tailpipe emissions, battery-electric vehicle (BEV) to the Mack medium-duty lineup also supports the company’s long-term sustainability goals.

The Mack MD Electric will be available like its diesel counterpart in Class 6 and Class 7 ratings. The Class 6 model has a Gross Vehicle Weight Rating (GVWR) of 25,995 lbs., and the Class 7 model has a

GVWR of 33,000 lbs.

Both models are exempt from the 12% Federal Excise Tax. The MD Electric’s three-phase permanent magnet synchronous motor and all on-board accessories are powered by nickel manganese cobalt oxide lithium-ion batteries, either in a 150-kWh or 240-kWh configuration.

The MD Electric can be charged through AC or DC charging units. The regenerative braking system helps recapture energy from multiple stops the vehicle makes each day.

Zeus AllElectric Bucket Truck

Zeus’ allelectric bucket truck concept featuring a customengineered Reading Truck Classic II service body and a Terex Hi-Ranger LT40 aerial device was upfitted to the Class 5 Zeus Z-19 Electric Smart Chassis.

The 19,500 GVWR truck is designed for medium-duty applications.

Its Zeus Z-19 platform is currently the only vocational Class 5 chassis awarded a CARB EO and related HVIP funding eligibility.

Felling Trailers New Product Offerings Polaris Commercial UTVs

The Polaris Pro XD Mid-Size, the Pro XD Full-Size and the all-electric RANGER XP Kinetic are designed for material handling, transporting equipment and moving cargo on construction sites.

Pro XD comes in full-size and mid-size versions.

The Pro XD Full-Size is offered in both gas and diesel with two- and four-seat versions. It offers a payload of up to 2,075 lbs. and towing of up to 2,500 lbs. The vehicle features maintenance intervals of up to 200 hours.

RANGER XP Kinetic features an all-electric powertrain giving customers a sustainable option for off-road work needs while addressing the limitations of combustion fleet expansion. It has 110 hp, 140 lb.-ft. of torque and the ability to tow 2,500 lbs. and haul 1,250 lbs. The RANGER XP Kinetic has a quiet electric powertrain and a rigid one-piece chassis, full-body skid plate and a large front bumper.

Zeal Motor FAT TRUCK Off-Road Utility Vehicles

Zeal Motor launched several new all-terrain vehicles. The 8-x-8 models are purpose-built for demanding terrains, offering the capability to transport up to 5,000 lbs. of payload or accommodate a crew of up to 16 people.

The 2.4 Pickup is a 2,000-lb. amphibious vehicle featuring a design with a hydraulic motor per wheel.

The 2.8 Wagon and Pickup represent the evolution of their predecessors, the 2.8C and 2.8P, with an 11% power increase and over 40 new features. Upgrades include impact-resistant windshields for safety, cab improvements and the introduction of power-take-off capabilities.

Stellar Toolbox System

Stellar Industries’ bale-style pull-handle toolbox system will not only replace the existing pull-handle toolbox system but also introduce several new capabilities. Designed with versatility in mind, the bale-style pull-handle toolbox system features a dualaction handle design that allows users to activate the latches by grabbing the handle from above or below.

The new toolbox system is designed with all metal components, including metal latches and handles.

In, drawer fronts are anodized, but customers will have the option to paint them to suit their individual preferences and styles.

www.ForConstructionPros.com/Equipment

Felling Trailers added Larson Cable Trailers to its product offering with the LCT-7500, LCT-5620 and LCT-5700. A division of Felling Trailers, Larson Cable Trailers specializes in fiber-optic cable-handling trailer products.

The Felling Trailers sales team is now offering the LCT models as part of their expansive product line.

Cushman Tour LSV & Hauler PRO LSV Utility Vehicles

Textron Specialized Vehicles launched two new Cushman utility models, the Tour LSV and Hauler PRO LSV. These models introduce street-legal vehicles to the Cushman lineup for construction and utility duties.

The Tour LSV and Hauler PRO LSV adhere to both the FMVSS 500 federal standard and the SAE J2358 industry standard. These vehicles can be operated on roads with speed limits up to 35 mph in various jurisdictions.

Check your local guidelines for more information on your area’s specific LSV regulations.

Both vehicles are powered by zero-maintenance Samsung SDI lithium battery technology used across the Cushman ELiTE series of vehicles.

Elliott Equipment D47 Digger Derrick

The D47 features a 26,000-lb. maximum lifting capacity, serving a range of lifting and material handling tasks. It also has a 17-ft. to 26-ft. digging radius, making it capable of reaching difficult-toaccess areas.

Standard features include 46-kV insulation, independent boom operation, transferable pole guide, line body and rear mounted hydraulic tool circuit.

The D47 is also equipped with several features that facilitate operation and maintenance. These features include full pressure, open center hydraulic controls, hydraulic side load protection, a planetary swing drive and winch motor that are typically found on larger machines and a control console with high back air suspension seat.

March 2024 | EQUIPMENT TODAY

43

T R U C KS & T R A N S P O RTAT I O N Products Cemen Tech CD2 Volumetric Concrete Mixer

Stellar Self-loading Single-Reel Cable Trailer

Stellar’s Self-Loading Single-Reel Cable Trailers supports hauling, removing and laying cable and wire on jobsites. With just one reel and a low setup, these trailers have a low center of gravity.

They also provide a way to keep cables neatly contained and organized on the jobsite to prevent tangles or damage. Stellar Self-Loading Single-Reel Cable Trailers offer a variety of load capacities ranging from 3,500 to 14,000 lbs., along with a range of reel capacities.

Stellar has several different models of these trailers available to meet demands.

Volvo Connect Fleet Management Portal

Volvo Trucks North America’s new fleet management portal to access Volvo Trucks’ digital services provides fleets with near real-time data on the health and performance of trucks in operation. The new portal, Volvo Connect, provides a digital suite of services, analytics and reports that deliver fleets a range of truck data, including fuel consumption, idle time, vehicle speed, seat belt information and location information.

Volvo Connect allows fleet managers to access the status of all Volvo trucks in their fleet that have a factory-installed 4G Telematics Gateway. The portal provides the ability to check and monitor parameters such as maximum allowed road speed and idle shutdown are set correctly and optimized for a truck’s specific transport assignment.

1-888-514-0083

The Cemen Tech CD2 is a fully automated mixer with a split bin with individual compartments to transport and blend various supplementary cementing materials.

The mixer is equipped to handle fly ash, a component mandated by DOT standards and municipalities.

The CD2 combines Cemen Tech’s volumetric mixing technology with a new SCM dual bin, enabling real-time mixing of ingredients at different proportions.

A dual bin design doubles the amount of mixes this unit can produce. The CD2 allows operators to produce durable and sustainable concrete. Special split bins hold up to 115 cu. ft. of cement and 80 cu. ft. of fly ash.

Mack Trucks ElectriFi Subscription

ElectriFi Subscription allows customers to pay as they go for miles driven with chassis and body, charging, applicable incentives, physical damage insurance and maintenance costs for the term of the agreement bundled into a single monthly payment for simplification.

Terms are flexible starting at 3 years, with an option to extend up to a total term of 6 years. The ElectriFi Subscription also comes with access to Mack’s suite of Uptime services, including telematics and Mack OneCall, Mack’s 24/7 roadside service and support offering experienced personnel at the Mack Uptime Center who will assist customers with the scheduling of their repair.

Along with the ElectriFi Subscription option, Mack Financial Services offers ElectriFi Infrastructure and ElectriFi Lease. Mack Trucks and Mack Financial Services can also advise on incentives for infrastructure.

TOOL and EQUIPMENT MOUNTING SOLUTIONS FOR MOBILE APPLICATIONS   

LIFETIME LIMITED WARRANTY ON ALL PAC PRODUCTS NON-CORROSIVE COMPOSITE MATERIALS DEALER INQUIRIES WELCOME P/N: 1004 Handle Lok

Aluma Single-Axle Wide Body Trailer

Aluma added a new single-axle, wide body trailer to its product portfolio.

With drive-over fenders, the new wide body, single-axle trailer WB15 SA DOF is capable of handling wide body loads, large side-by-sides and UTVs. The trailer has a bed size of 96.875 in. x 179.5 in. with 82.5 in. between the fenders and features 5200-lb. rubber torsion axle. Aluma offers aluminum utility and recreational trailers, including utility trailers, ATV trailers, car haulers, motorcycle trailers, and snowmobile trailers. Aluma trailers are built in the U.S. and sold through a nationwide dealer network.

REE Automotive P7-C

MADE IN THE USA

P/N: K5043 Extinguisher Mount

44

EQUIPMENT TODAY | March 2024

REE Automotive offers the P7-C electric truck for fleet applications. This vehicle has an electric chassis cab, meeting requirements under Federal Motor Vehicle Safety Standards and featuring Environmental Protection Agency certification. REE has initiated customer deliveries of the first batch of P7-C demonstration trucks for multiple fleets evaluations in North America via its authorized dealer network.

Products T R U C K S & T R A N S P O RTAT I O N Ford Pro Telematics & Fleet Solutions

Ford Pro unveiled several new software and technology features to give fleet managers insight about and control of how their commercial vehicles are operated to manage fleet risk. The company’s commercial solutions pull connected vehicle data and integrate it into the Ford Pro Intelligence platform.

Ford Pro now offers video telematics fully integrated into the Ford Pro Intelligence platform. The new solution uses a windshield-mounted, cloud-connected dashcam from Lytx, a provider of dashcams, with two lenses to capture road-facing and in-cab footage. It delivers insights based on the customer’s Ford Pro Telematics subscription level and business needs. The dashcam’s outward-facing lens records footage that can potentially provide evidence in the case of an on-the-job incident. It can also capture context related to vehicle alerts or driving events, such as harsh braking to help avoid a road hazard. This footage can be used to coach drivers on compliant driving habits and potentially strengthen cases against insurance claims.

XL Specialized Trailers New Options for Guardian Trailer

XL Specialized Trailers introduced new options for the XL Guardian 110 Hydraulic Detachable Gooseneck trailer, a standardized construction trailer. The new line of options includes an 18-in. loaded deck height version and 60-in. axle spacing option.

In addition to the 22-in. loaded deck height option for the main bed, XL offers an 18-in. loaded deck height option. Operators can adjust the height of the deck for diverse loads with a five-position variable ride height in the neck and manual ride height in the rear.

Stellar Shuttle 16 Hooklift

Stellar offers the Shuttle 16 Hooklift for handling dump containers from 8 ft. to 15 ft. or flatbeds from 10 ft. to 16 ft. Designed for construction and landscape projects, the hooklift features a 16,000lb. lifting capacity.

The Hooklift accommodates bodies from 8 ft. up to 15 ft. long and still retain the maximum rated dump angle on a 41-in. high frame truck.

It includes a transmission-mounted PTO and the hydraulic pump required to power the hooklift. The hooklift has standard in-cab manual controls for the metering of the manual hydraulic valve and a 10-gal. capacity, frame-mounted oil reservoir.

Maximum hydraulic flow is 16 gal. per minute.

Custom Truck Lightning PTO

Custom Truck One Source’s Lightning PTO is an electronic PTO that powers the hydraulics used to operate utility equipment. Adding Lightning PTO to utility equipment allows a truck engine to only run during transportation between jobs, minimizing diesel emissions.

Base unit models include the following: 5 kWh, 7 kWh, 10 kWh and 14 kWh. Customers can choose a specific model based on the requirements of their equipment.

Recharge time for the battery ranges between 4 hrs. and 12 hrs. An integrated battery management system is available, providing safe operation during use and charging.

The Lightning PTO is compatible with Terex, Versalift and Altec fleet equipment. This product carries an IP66 rating for durability in rugged working conditions.

It can also withstand pressure washing during maintenance and cleaning.

Volvo VNL Truck

The Volvo VNL has an angular, wedgeshaped cab design and a redesigned windshield. Additional aerodynamic gains were created from the integration of the curved and bonded windshield, tighter clearances around turbulent air areas like wheel openings, the bumper and the hood, chassis fairings and promoting a tighter trailer gap.

These designs, were developed and tested in parallel with Volvo Trucks’ SuperTruck 2. This truck is powered by the latest generation D13 engine. The D13 engine is available in four horsepower ratings, ranging from 405 hp to 500 hp and three torque ratings from 1,750 to 1,950 lb,-ft. of torque.

These different power options are designed for different applications and incorporate the I-Shift transmission.

Several active safety systems are offered with the new Volvo VNL, including Volvo Active Driver Assist Plus with Pilot Assist which provides active lane centering.

LEARN MORE ABOUT TRAILERS & TRUCK UPFITS AT THUNDERCREEK.COM

March 2024 | EQUIPMENT TODAY

45

ROADBUILDING

Read More at eqtoday.co/RoadEquip

Products

BOMAG BW 100 AD e-5 Tandem Roller

The BW 100 AD e-5 tandem roller features two long-life rechargeable batteries that provide enough power needed for a typical workday. Two high-efficiency electric motors independently control the drum vibration and travel/steering, so only one motor is needed for travel mode to conserve power.

Perfect for night work or urban areas with its low noise/zero emissions, the BW 100 AD e-5 offers a 39.4-in. (1-m) drum width, 3,900-vpm/3,3360 vpm (65-Hz/60 Hz) drum frequency and 0.020-in (0.50mm) amplitude.

GOMACO GP460 Placer/Spreader & Slipform Paver

LeeBoy 8608 Asphalt Paver

The LeeBoy 8608 asphalt paver is equipped with an efficient narrow conveyor management system. It is ideal for heavy commercial paving and large volume jobsites.

The LeeBoy 8608 is powered by a 125hp Kubota Tier 4 engine and a 14.4-kW belt-driven generator. With an operating width of up to 15 ft., 6 in., this machine will be easy to maneuver in tight spaces.

It takes operator comfort to another level with the addition of the Oscillating Bogie Style Track System. The machine also includes a lowered SCR, exhaust and flat hood for enhanced operator visibility and access.

GOMACO GP460 is a combination concrete slipform paver and placer/spreader on two tracks. Designed for wider width operations, as a placer/spreader with a 60-in. (1524-mm) belt, the GP460 will accommodate widths up to 50 ft. (15.2 m) wide. As a concrete slipform paver, the GP460 will pave widths up to 40 ft.

(12.2 m) wide.

It is built on the framework of the GOMACO two-track GP4 slipform paver with the ability to convert the prime mover into a concrete placer/spreader. The prime mover is equipped with vibrator circuits for paving and auger drive circuits for placing.

The technology is controlled with the GOMACO G+ digital control system. G+ seamlessly handles the controls conversion needed for each application while also bringing onboard machine-to-machine communication, sonic sensors, 3D machine guidance and more.

The GOMACO GP460 is powered by a Caterpillar C7.1 turbocharged diesel engine to efficiently drive the conveyor belt and distribute concrete across the grade. The highvolume, 60-in. (1524-mm) conveyor belt can be mounted on either the left or right side, depending on jobsite conditions and the location of the haul road.

It has a discharge speed of up to 492.5 fpm (150 mpm) for fast and efficient concrete placement. A controllable material deflector directs the flow of concrete at the discharge end of the conveyor for placement accuracy. A dual-drive auger system moves the material to the center or outer areas and across the strike-off.

Caterpillar RM600 & RM800 Reclaimer/Stabilizers

Wacker Neuson Next-Gen 4-Stroke Rammers

Wacker Neuson BS62-4Ab and BS68-4Ab 4-stroke rammers are designed to deliver compaction results with their shoe stroke, percussion rate, impact energy and travel speed. New to the BS62-4Ab and BS68-4Ab is a revised height-adjustable guide handle.

Wacker Neuson’s 4-stroke rammers come standard with an EquipTrack module with Bluetooth. The module (or beacon) is attached to the rammer and provides continuous operating data including operating hours, status and detection of load, and upcoming maintenance schedules.

The EquipTrack app is paired with a smartphone to display the unit’s location and more. The rammers are powered by Honda engines. The BS62-4Ab weighs 141 lbs. and generates an impact force of 3,822 lbs. The BS68-4Ab weighs 154 lbs. and delivers an impact force of 4,271 lbs. Both produce 689 blows per minute and feature a shoe stroke height of 2.6 in.

Weiler P285

Engineered and built for the demands of commercial paving, the Weiler P285 incorporates proven designs with new innovations to provide performance, reliability and outstanding mat quality in a wide range of applications.

The Weiler designed 2,800-lb. (1,270-kg) screed delivers mat quality and a wide paving range. The 7-ft., 8-in. (2.3-m) front mount screed is hydraulically extendable to 15 ft. (4.6 m).

Highway class chains, conveyor and auger bearings provide long-term reliability.

Remote grease lines located on the front counterweight provides easy daily maintenance.

LeeBoy HB4T Hotbox The HB4T Hotbox features:

• Trailer-mounted 4-ton hopper

The new Caterpillar RM600 and RM800 reclaimer/stabilizers compete at the high end of the reclaimer/stabilizer size class with an all-new adjustable height design capable of cross-slope cutting. Their turbocharged Cat C18 engine gives the RM600 up to 17% more power than the RM500B. The RM800 delivers up to 42% more power than the RM500B and

up to 23% more power than the RM600.

These models adopt rotor system components from Cat cold planers for cutting and mixing. Featuring a belt-driven rotor drive system, the machine can flush-cut on the right side. The new System K rotor uses the same cold planer, fastener-free, dual-taper toolholder and base block components to deliver material quality on a range of projects.

Wirtgen Hamm HC Series VC Compactors

Wirtgen offers Hamm HC 250 C VC (Tier 3) and HC 250i C VC (EU Stage V/EPA Tier 4f) compactors. These machines crush and compact mixed soils and stones, such as basalt and granite in a single workstep.

With Deutz engines, three-point articulation and the underbody, the new compactors handle tough applications.

The 25-t machines are supplied with heavy-duty tires for rocky terrain, driver’s cab and the Easy Drive operating concept, all as standard.

Dynapac F1000T (T4)

Two independent conveyor halves allow for infinitely variable speed. Both halves can be controlled separately. Conveyor control is independent of augers by ultrasonic sensors. The dashboard has a multifunction display on each console.

The 6-cyl., water-cooled diesel engine has a hydraulically driven fan.

Mauldin 1860B Asphalt Paver

• Basic paving width: 3.05 m

The 1860B Asphalt Paver has dual operator’s stations with full machine controls, including dual digital gauge displays. Standard sonic controlled variable speed four auger material feed system provides a consistent head of material control.

• Hydraulic dump hopper

• Max. paving width: 7.93 m

• 110-hp Tier 4 Final diesel engine

• Curb side operation

• Max. layer thickness.: 305 mm

• 9.5-t hopper capacity

• Cantilever side-to-side material loading doors

• Theor placement cap.: 1600 t/h

• Pre-wired for screed automation

• Integrated compactor storage compartment

• Paving speed 0 m/min to 32 m/min

• Seamless paving up to 16 ft.

• Thermostatically controlled diesel burner • 110-VAC overnight heater • Single material unloading door • Full width shoveling platform with integrated material shutes

46

EQUIPMENT TODAY | March 2024

www.ForConstructionPros.com/Equipment

ROA D B U I L D I N G Products

Sany SCM2000C-8W Milling Machine

The Sany SCM2000C-8W Milling Machine has a maximum 330-mm milling depth.

It finishes the milling on surface layer, structure layer and basic layer at one time.

The machine has a big open aperture for the engine cover and radiator cover, which decreases the time for maintenance and cleaning inside engine room by 50%.

A widened front wheel tread is designed for easy access compared to an ordinary flat car. The machine includes engine failure self-diagnosis, centralized electrical components and fuel and hydraulic oil filling at the same side.

There is an 850-mm extra wide conveyor belt mated with higher conveying speed designed for big quantity conveying. The machine features a left/ right, 60-degree ultra high swing angle for loading all size material trucks.

JCB Pothole Pro

JCB developed a single-machine pothole and patching repair solution to fix potholes permanently, the Pothole Pro. This solution helps minimize labor, intensive repair methods or additional machinery.

The Pothole Pro can repair a pothole in less than 8 min. With a 25-mph travel speed, it can relocate between sites without additional transport costs.

The JCB Pothole Pro is equipped with a planer, mounted on the rear skid steer hitch. The planer is 24 in. wide, with up to 4.26 ft. of side-shift adjustment. This allows the operator to plane a full roadway lane from the curb, without repositioning.

Hydraulic tilt and depth control provide a consistent depth for large patches.

Wacker Neuson’s APU3050e is a first battery-powered reversible plate that delivers an innovative and practical solution for compaction tasks. This emission-free plate meets the needs of jobsites with environmental and noise guidelines.

The APU3050e is extremely easy to operate. It is simply started with a push of a button and is comfortable to operate using the intuitive guide bar that allows continuous change of direction and speed by just moving the handle.

It is designed for excellent handling and maneuverability on soil and asphalt. The low working height makes it ideal for working indoors, in trenches and other confined areas. The Battery One system, that powers the plate, can also be used on other Wacker Neuson battery-powered rammers and plates, making it flexible for the rental center.

Depending on the application, one battery charge may be sufficient for smaller applications, but having two batteries and a quick charger available is recommended for larger jobs, which is typical for a reversible plate. Battery changes are easy with no special tools necessary.

The APU3050e required minimal maintenance since the motor is mounted directly to the base plate and does not require a v-belt, reducing operating costs and spare parts expenses, another important benefit.

Kleemann MOBIREX MR 130i PRO

The Kleemann MOBIREX MR 130i PRO Mobile Impact Crusher, is used as a primary and secondary crusher and combines output and sustainability. It covers a range of applications: From soft to medium-hard natural stone to recycling applications, such as the processing of concrete, rubble and asphalt.

This plant generates an hourly output of up to 661 t/h (U.S.). With its heavy rotor and powerful electric 335-hp drive together with pre-screening capabilities, the crushing unit provides high and stable throughput.

Thanks to the continuous feed system, continuous crusher use is provided. The allelectric drive concept E-DRIVE with the option of an external power supply allows the MR 130i PRO to be operated free of emissions.

Hydraulic oil is only required for setting and setup functions. When operated via the diesel generator, the power- and load-dependent fan helps reduce noise. An optional power pack housing is available for additional noise reduction. Water spraying at relevant points— such as the crusher inlet, the discharge conveyors, the post screening unit and different belt covers—can minimize dust.

EQUIPMENT TODAY | March 2024

Husqvarna Construction’s first batterypowered compactor, the LFe60 LAT, is a new forward plate compactor that delivers compaction of soil and asphalt. It runs on the Honda eGX battery platform.

The LFe60 LAT combines reliable handling, no CO2 direct-exhaust emissions during operation and smart capabilities in a single machine. Operators can access several features on the machine—such as a push-start button, transport wheels, low-vibrations and a handle that folds for compact transport.

The electric motor of the LFe60 LAT compactor also helps minimize downtime.

The CCS9 is a 9-metric-ton vibratory combination compactor. It combines the smooth front drum of a soil compactor, with smooth rear tires similar to a pneumatic compactor. In addition, the water spray system on Cat asphalt compactors keeps the drum and tires wet for excellent performance on asphalt.

It offers outstanding operator comfort while continuing the legacy of durability, reliability and ease-of-service that contractors worldwide have come to expect from Caterpillar machines. Touch pad functions enable the operator to fine tune engine speed, travel speed and water spray intervals for efficient operation.

FAE RPM/SSL Road Planer

Wacker Neuson APU3050e Battery-Powered Reversible Plate

48

Husqvarna LFe 60 LAT BatteryPowered Compactor

Caterpillar CCS9 Combination Asphalt Compactor

The FAE RPM/SSL road planer attachment is designed for road surface preparation before adding a new layer of asphalt or concrete and excavation operations. Compatible with skid steers from 75 hp to 135 hp, the attachment can shred up to 10 in. deep at a width of 24 in.

Self-leveling skids and tilt enable operation on uneven surfaces. The hydraulic drive system and practical depth and cutting indicators promote accuracy during use.

It also features a working pressure control gauge, anti-shock block valve with relief and anti-cavitation valves. The line has teeth specifically designed for asphalt and concrete road surfaces.

Wirtgen W 150 F(i) Cold Milling Machine LeeBoy 8680 Paver

The 8680 Paver features include: • 210-hp (157-kW) Kubota Tier 4 Final diesel engine • Legend HD PRO Screed • Variable paving widths up to 15 ft., 6 in.

• 12-1/2 t capacity material hopper • Dual electronic steering and adjustable operator platforms and two 18-in. feeding conveyors • Hydraulic extending power tunnels • Automatic Temperature Control • Smooth rubber tracks with oscillating bogeys • Actuator-driven hood lift to simplify maintenance

www.ForConstructionPros.com/Equipment

Wirtgen’s W 150 F(i) compact milling machine features a milling width of 1.80 m (6 ft.) and is designed for use on major construction sites with restricted space.

The intuitive operating design, digital assistance systems and the LEVEL PRO ACTIVE leveling system allow for oneperson operation.

The agile front loader with a standard working width of 1.50 m (5 ft.) features eco-friendly engine technology compliant with EU Stage 5/U.S. Tier 4 Final exhaust emission standards.

The 9L John Deere engine offers a maximum rated output of 315 kW and has been adapted to meet the needs of cold milling applications. It offers high torque and low noise under different load conditions. Milling is possible to a maximum working depth of 330 mm.

Be recognized as a BEST contractor

Apply for a chance to be acknowledged as an exceptional employer that demonstrates people are their most important asset. Completing the application process online is FREE and gaining the distinction of being a best contractor provides the advantage of attracting the hardworking and skilled workforce your company deserves.

Apply today at BestContractorsToWorkFor.com To be considered, eligible contractors are required to have a minimum of 15 full-time or part-time employees in the U.S. and a primary business of: General Building Construction, Earthmoving, Paving, Concrete or Specialty and trades (Underground, Utility, Electrical, HVAC, Demolition, etc.)

SCAN HERE

APPLICATION DEADLINE JULY 12, 2024

ROA D B U I L D I N G Products Minnich Single Gang Barrier Wall Drill

Minnich Manufacturing’s Single Gang Barrier Wall Drill is a self-propelled, pneumatic drill designed to optimize safety during the process of securing concrete barrier walls.

The Single Gang Barrier Wall Drill eliminates the time of making manual adjustments to align multiple drill hole measurements.

There is no need to line up drill holes.

Simply align the drill steel through the premolded opening in the barrier wall, penetrate the sub-base, drop in the steel pin anchor and move to the next securing point. This solution is designed for roadway construction and patching projects requiring concrete barrier wall protection.

FAE RPL/EX Fixed Tooth Road Planer

FAE’s RPL/EX road planer for excavators is based on cold planer technology. With cold planer technology, the road’s surface is scraped and cut by the impact of special teeth attached to the rotor.

The RPL/EX has a specially designed layout to reduce vibration. With these features, the RPL/EX can be used to prepare roads for resurfacing or to support excavation operations. The RPL/EX is compatible with excavators from 8 tons to 14 tons, can mill up to 5.3 in. deep and has a working width of 18 in.

The head comes standard with technological and structural features. These include an adjustable hydraulic base that allows operators to manage the machine’s working depth, a wide-stroke self-leveling system that allows them to keep the head properly aligned while in operation and an adjustable right skid that allows operators to keep the head aligned in overlaps. It also has teeth specifically for use on asphalt and concrete road surfaces.

Wirtgen WRC 240(i) Rock Crusher

The WRC 240(i) from Wirtgen expands the portfolio of wheeled soil stabilizers designed for the processing of stony ground. This machine breaks coarse rocks in-situ, as found in hand-packed pavement layers (e.g. Telford bases) or stony soils and produces a homogeneous mix in a continuous process. A working width of 2,320 mm and a working depth of up to 510 mm enables an output of up to 600 tons per hour.

In addition to crushing rocks and stones with an edge length of up to 300 mm and strength up to 200 MPa, the machine can add cement and water in the same pass, for instance in the preparation of base layers.

The cement is pre-spread with a binding agent spreader and the water required is sprayed into the mixing chamber by the machine’s Varioinjection bar. It can also be used for soil stabilization.

For this application, prespread binding agents, such as lime or cement, are mixed into the existing soil with insufficient bearing capacity, which is transformed in-situ into a high-grade construction material and deposited behind the machine.

50

EQUIPMENT TODAY | March 2024

ROADTEC RX-405 Cold Planer

The versatile RX-405 milling machine is ideal for contractors who need a smaller cold planer that offers versatility and flexibility. Contractors of all sizes benefit from a powerful machine that can tackle sizerestrictive jobsites like trenches, utility work and parking lots.

• Simplified controls are easily operated from either side of the platform • Multifunction joystick controls are easy to understand • Expanded on-board diagnostics keep the operator informed of changes in grade from ground controls • The hinged door on the side of the cutter housing makes it easy to access all parts of the cutter housing and change the drum • The single cutter housing can quickly transition from 2 ft. to 5 ft. wide • Automated Control of Elevation automates machine elevation through grade and slope sensors • Operator and ground crew can easily adjust grade and slope parameters in real time • Depth and slope are continuously displayed • Can be coupled with Auto-Cut, which automates rear elevation as it enters each cut

Road Widener Curb Backfiller

The Road Widener Curb Backfiller accessory for the FH-R material placement attachment.

The accessory extends to the left or right of the FH-R and dispenses material over the curb to backfill with dirt or aggregate.

Paired with the FH-R, the Curb Backfiller supports safety by replacing a backfilling method typically done manually by workers with shovels. Crew members can operate it with the original FH-R remote, reducing the number of workers to one. It attaches to the FH-R and fills on the right by default, or the left, with dual configuration. It provides a clean process by backfilling curbs and keeping debris off the roadway.

JCB CT160 & CT260

Two tandem roller compaction machines, the CT160 and CT260, from JCB are new to the North American market. At 3,770 lbs. to 6,041 lbs., these machines can be trailered for transportation.

The CT160 offers a choice of either a 31.5-in. (800mm) or a 39.3-in. (1000-mm) drum. The CT260 comes with a 47.2-in. (1,200-mm) drum. The machines will be branded with “Vibromax,” after the German company JCB acquired in 2005.

Both machines’ responsive directional drive lever enables fore and aft movements. From a bird’s eye view, the CT160 and CT260 have an hourglass profile, which allows operators to see the drum edges. On the CTs’ control panels, work modes are visible, and the switches are sized to create tactile feedback even with gloved hands. Anti-vibration mounts isolate the operator from drum vibrations.

LiuGong 6612E Single Drum Roller The LiuGong 6612E Single Drum Roller facilitates soil, gravel or asphalt compaction for road construction and repair. This roller is powered by a 155-hp Cummins QSB4.5 engine and a hydraulic steering system.

Equipped with a single 83.85-in. drum, operators can access two amplitude settings on the machine. Cab features include joystick controls, a digital display and exterior LED lights.

Optional components are available for meeting specific operating or project requirements. An optional rotary beacon supports safety and visibility on busy jobsites, by generating a visible warning signal during use.

Additionally, a compaction meter can be added to the 6612E to measure the density of soil or degree of compaction. Location-based monitoring via GPS is also available as an option.

LeeBoy RB50 E-Broom The RB50 E-Broom features: • 48-kWh battery pack • J1772/CCS Combo 1 charging receptacle, • Level-1 (120-VAC) and Level-2 (240VAC) charging with on-board charger • Level-3 DC Fast Charging Enabled, compatible with North American EV charging stations and battery trailers.

• Console-mounted brush controls.

• Forward reverse foot pedal transmission • 10-in. inside and 18-ft., 9-in. outside turning radius • Variable brush down-pressure control • Climate-controlled cab

Simple, Fast, and Convenient!

20 XPT • CAPACITY: 40,000 lbs.

• 20 Ton Air Brakes • 8 Degree Loading Angle Low Profile

• Trailer Weight: 8,380 lbs.

• Overall Width: 102", Length: 31'4" • Deck Length: 21’ Flat (model shown) • 6’ Beavertail • Deck Height: 34" • Tires: Eight 215/75R17.5 (H) • Brakes: Air (Full ABS System) • Ramps: 72" Long x 22” Wide Range: 102" Max. 29" Min. • Lighting:100% Sealed Wiring harness and L.E.D. Lights

Standard Features On All Easy Loaders ONE PIECE CAST LUNETTE EYE

HEAVY DUTY 2-SPEED PARKING JACK

Tested @ 275,000# and wrap around nose plate.

Standard on all trailers.

70,000# static capacity.

Standard on all 15-25 Ton trailers.

HIGH TENSILE MAIN RAIL

ADJUSTABLE 3-LEAF SUSPENSION

One piece and cold formed.

CROSS MEMBERS pierced

through Main Beam for lowest possible deck height and more unitized frame.

APITONG/COMPOSITE DECK Durable Composite Decking is fastened to the crossmembers with bolts and deck washers making it easier to replace decking when required.

Standard on all 15-25 Ton trailers.

ALL WHEEL ABS

with Spring Brakes on all axles.

Standard on all air brake trailers.

98” WIDTH 92” WIDTH

Eager Beaver WIDE TRACK AXLES: 98” Some Competition - 92”

SUMITOMO BRAND TIRES National Dealer Supported.

HUB PILOTED WHEELS

Outboard brake drums for easier maintenance.

For a quote on any model, please call 800-257-8163 >> EagerBeaverTrailers.com

TAKE MOUNTAINS, MAKE RUBBLE. BLASTS BEFORE BREAKFAST. LOADERS HAULING TONS. FEED YOUR KLEEMANN BECAUSE IT’S HUNGRY. HAUL TONS AGAIN. STRIP OVERBURDEN. EXCAVATORS CALLING SHOTS. ADTS ON THE MOVE. OPS REPORTING STATS. NO TIME FOR DOWNTIME. GET THE GRAVEL GONE. CRUSH SOME MORE WHERE THAT CAME FROM. MOVE IT BEFORE THE SUN CALLS IT QUITS.

DEERE.COM/MOVEROCK