Equipment Today March 2021

MARCH 2021

2021

Helping you optimize ROI on your construction equipment

PRODUCT SHOWCASE

FIND 100s OF PRODUCTS TO COMPLETE YOUR CONSTRUCTION FLEET

#1 Market Leaders

CO ST

CLIMBING INTO YOUR 4X4 TRUCK AT THE END OF YOUR SHIFT IS SUDDENLY A LETDOWN. MAKE EASY WORK OUT OF CHALLENGING CONDITIONS WITH THE ALL-NEW 460E-II AND 410E-II. With new features that help eliminate guesswork and optimize comfort, operators can focus on getting more done. Like three new drive modes and simplified transmission-retarder controls that can be matched to jobsite conditions or your operator’s driving style. Plus, improved fuel burn* for the 460E-II means less refueling. Meanwhile, the updated hose routings and new sensors are designed to help improve uptime, and the quiet, pressurized cab with new primary display, optional premium heated/ventilated seat, and auto temperature control makes easy work out of long shifts. Free your mind.

Run Your World. *Fuel-consumption improvements based on comparison of 460E to 460E-II.

ET0321_02-03_TOC_CB.indd 2

JohnDeere.com/ADTs

2/24/21 12:16 PM

Contents COVER STORY

®

MARCH 2021 | www.ForConstructionPros.com

2021 SHOWCASE

Published by AC Business Media

201 N. Main Street, 5th Floor Fort Atkinson, Wisconsin 53538 (800) 538-5544 www.ACBusinessMedia.com

Publication Staff Publisher Sean Dunphy, sdunphy@ACBusinessMedia.com Editor Becky Schultz, bschultz@ACBusinessMedia.com Senior Field Editor Curt Bennink, cbennink@ACBusinessMedia.com Contributing Writers Garry Bartecki, Nathan Medcalf

Art Director Dave Haglund Senior Production Manager Cindy Rusch Audience Development Manager Angela

Franks

Advertising Sales (800) 538-5544 Sean Dunphy; Nikki Lawson; Kris Flitcroft; Eric Servais; Tadashi Soma National Automotive Manager Tom Lutzke

(630) 484-8040

ForConstructionPros.com

Find thousands of additional products in the NEW PRODUCT DIRECTORY at www.ForConstructionPros.com.

PRODUCTS

Editor Larry Stewart Managing Editor Kimberly Hegeman

AC Business Media Chief Executive Officer ............. Barry Lovette Chief Financial Officer.............. JoAnn Breuchel Chief Digital Officer ................. Kris Heineman Chief Revenue Officer .............. Amy Schwandt VP Audience Development ........ Ronda Hughes Dir. of Digital Operations & IT .. Nick Raether Director of Digital Strategy ...... Joel Franke Group Content Director ............ Jon Minnick

Change of Address & Subscriptions

4

20

EARTHMOVING

Includes excavators, wheel loaders, backhoe-loaders, skid steers, compact track loaders and more.

List Rental Bart Piccirillo, Sr. Account Manager, Data Axle Phone: (518) 339-4511 bart.piccirillo@data-axle.com

4

20 ATTACHMENTS

Includes buckets, breakers, crushers, concrete drills, mulchers and more.

Reprints

24

Reprints — For reprints and licensing please contact Sean Dunphy at 920-542-1252 sdunphy@acbusinessmedia.com

24 TRUCKS & TRANSPORTATION

Published and copyrighted 2021 by AC Business Media Equipment Today makes every effort to report manufacturers’ product news accurately, but is not responsible for validity of news claims.

Includes pickup and heavy-duty trucks, service bodies, trailers and more.

All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording or any information storage or retrieval system, without written permission from the publisher.

37

32 FLEET MAINTENANCE

SUBSCRIPTION POLICY: Individual subscriptions are available without charge in the U.S. and Canada to management, engineering, supervisory, equipment maintenance and other personnel who have buying influence in the construction equipment industry.

Subscribe online at www.ForConstructionPros.com.

Publisher reserves the right to reject non-qualified subscribers.

Includes engines, components, fluids, service equipment and more.

37 LIFT EQUIPMENT

32

Includes boom and scissor lifts, telehandlers and more.

41 ROAD BUILDING

Includes concrete and asphalt pavers, rollers and more.

PO Box 3605, Northbrook, IL 60065-3605, Phone: (877) 201-3915 • Fax: (847) 291-4816 circ.EquipmentToday@omeda.com

44

One year subscription to non-qualified individuals: U.S. $50; Canada/Mexico $70; all other countries $100 (payable in U.S. funds, drawn on U.S. bank).

Single copies available (prepaid only) $10.00 each (U.S., Canada & Mexico), $15.00 each (International). For change of address or subscription information call (847) 559-7598 or fax (847) 291-4816. Equipment Today (USPS 369-290, ISSN 0891-141X) is published is published 12x with issues of January, February, March, April, May, June, July, August, September, October, November and December by AC Business Media, 201 N. Main Street, 5th Fl., Fort Atkinson, WI 53538. Periodicals postage paid at Fort Atkinson, WI, and additional entry offices. POSTMASTER: Please send change of address to Equipment Today, PO Box 3605, Northbrook, IL 60065-3605. Printed in the USA.

41

44 WORKSITE EQUIPMENT

Includes power sources, concrete equipment, technology products and more.

Canada Post PM40612608. Return Undeliverable Canadian Addresses to: Equipment Today, PO Box 25542, London, ON N6C 6B2.

Vol. 57 No. 3 March 2021

50 ADVERTISERS’ INDEX www.ForConstructionPros.com March 2021 | EQ U I P MEN T TO D AY

ET0321_02-03_TOC_CB.indd 3

3 2/26/21 8:12 AM

EARTHMOVING Products JCB 131X and 150X Excavators

Volvo EC200E Crawler Excavator The 20-ton EC200E offers a durable design, long service intervals and easy maintenance to help maximize uptime and reduce total cost of ownership.

• Has a 22-ft. 3-in. maximum digging depth, 32-ft. 9-in. maximum digging reach and a lifting capacity of 16,138 lbs.

• Attachment management system allows presetting hydraulic flow and pressure for 20 attachments • Volvo Tier 4 Final D4 engine includes auto idle, auto engine shutdown and ECO mode for increased fuel efficiency • Integrated work modes incorporate engine rpm and hydraulic flow into a single dial for optimal balance of power and controllability

www.forconstructionpros.com/21063611

Hitachi ZW220-6 Wheel Loader The 38,910-lb. ZW220-6 mid-size wheel loader is powered by a 200-hp Cummins Tier 4 Final no-DPF engine and delivers 34,170 lbs. of breakout force.

• Heaped bucket capacity of 4.2 to 4.7 cu. yds.

• Loading heights of up to 13.5 ft.

• Transmission offers two auto modes and one manual mode to adapt to the application • Parallel tilt & lift movement smooths out digging operations and Tandem function prioritizes the bucket while dumping • Includes an automatic return-to-dig function, auto shutdown feature and optional E-Stick steering system

www.forconstructionpros.com/21126522

SANY SY215C Excavator The SY215C excavator is powered by a Cummins Tier 4 Final engine and features two circuits of auxiliary lines down the arm for ready to use hydraulic power.

• Side frame rails standard • Optimized cabin for visibility and operator comfort • SANYLive telematics GPS system keeps track of engine hours, fuel usage, location history, alerts and events

www.forconstructionpros.com/12293819

The 131X tracked excavator is equipped with the 74-hp JCB EcoMAX engine that requires no replaceable diesel particulate filter (DPF) or diesel exhaust fluid, while the 150X has a 109-hp EcoMAX engine that requires no replaceable DPF. • Larger Kawasaki hydraulic pump on the 150X can run at lower engine speeds for more productivity per gallon of fuel, with the larger bucket cylinder delivering an 11% increase in bucket tearout force • Breakout force on the 131X increased to 22,931 lbf.

• Power boost duration increased from 3 to 9 seconds for maximum bucket and dipper tearout for longer periods • Auto Idle and Auto Engine Stop features contribute to fuel savings

www.forconstructionpros.com/21087606

Case Upgraded F Series Compact Loaders The 58-hp 21F, 64-hp 121F, 74-hp 221F and 74-hp 321F feature adjustable electrohydraulic controls for advanced bucket lift and tilt functionality.

• 11,272- to 13,303-lb. operating weights and 5,265- to 8,354-lb. lift capacities • Bucket metering provides more precise and consistent movement of the bucket edge while metering or sifting material • E-inching pedal uses an electronicallycontrolled inching valve to provide greater response and control • Include a “maintenance-free” Tier 4 Final particulate matter catalyst solution and cooled exhaust gas recirculation engine • Automatic Ride Control feature engages at higher ground speeds to retain bucket load

www.forconstructionpros.com/11322803

Yanmar SV40 Compact Excavator The 9,206-lb. SV40 ultra-tight tailswing excavator is powered by a 39-hp Yanmar electronically controlled, Tier 4 Final diesel engine.

• 11-ft. 3-in. digging depth • Ultra-tight turning and boom swing enable work in confined spaces • VIO progressive three-pump hydraulic system • Comes standard with ECO Mode, Auto-Decel Mode and backfill blade lever-controlled with float position, two-speed operation and an LCD monitor • SMARTASSIST remote communication system • Standard hydraulic quick coupler

www.forconstructionpros.com/21131888

LBX Link-Belt 80 X3 Spin Ace Excavator

Komatsu PC210LCi-11 Excavator

The 18,900-lb. Link-Belt 80 X3 Spin Ace has a 54-net-hp Isuzu Tier 4 Final turbocharged engine that doesn’t require a DPF and offers one-touch idle and auto idle functions and auto engine warm up.

• Speed Priority, Heavy and Applied Power engine work modes • Open-center hydraulic system • Delivers a 13-ft. 9-in. maximum dig depth, 22-ft. 9-in. reach at ground level and 12,800 lbf. of bucket digging force • Roomy ROPS/FOPS Level 1 certified pressurized cab with fully adjustable seat, ergonomic, low-effort joysticks, high-definition 7-in. LCD monitor and standard rear view camera

The 165-hp PC210LCi-11 has a fully integrated grade assist system that automatically traces the target surface to minimize over digging.

• Bucket angle hold control automatically holds bucket angle to design surface for finish grading using only arm input • Auto tilt bucket control assists in aligning the bucket parallel with the slope for finish grading without having to align the machine with the target surface • Stroke-sensing hydraulic cylinders provide real-time position that is immediately displayed to the operator • Auto stop control ensures machine automatically stops when the bucket edge reaches the design surface

www.forconstructionpros.com/21116235

www.forconstructionpros.com/20975929

4 EQU IPM ENT T ODAY | March 2021 ET0321_04-19_Earthmoving_BC_dh.indd 4

John Deere Tier 4 Final G-Series Loaders The 312GR, 314G, 316GR and 318G skid steers and 317G compact track loader feature an optimized boom design that provides lifting heights over 10 ft. on vertical lift models (314G, 317G, 318G) and a 21% increase in breakout forces on radial lift models (312GR, 316GR).

• 1,550- to 2,124-lb. rated operating capacities • 51- to 65-hp Yanmar Tier 4 Final engines and hydraulic powertrains • 316GR, 318G and 317G offer 24% more engine power and all models provide 11% additional fuel capacity • 316GR and 318G feature two-speed, air conditioning, electrohydraulic joystick controls, an enhanced lighting package and self-level and ride control combination

www.forconstructionpros.com/12165996

www.ForConstructionPros.com

2/24/21 12:24 PM

With great power comes great big subdivisions.

Construction Lineup Durable Kubota engines Upgraded tech & features

When it absolutely has to be done right, turn to the equipment that’s built for it. The Kubota construction lineup. Reliable, comfortable track loaders.

Productivity-boosting skid steers. Powerful wheel loaders. Heavy-duty utility vehicles.* And #1 selling compact excavators.** All built around dependable Kubota engines and ready to take on big jobs.

KubotaUSA.com *RTV-X utility vehicle not pictured. **According to 2019 data from Off-Highway Research including all Kubota Group brand sales. © Kubota Tractor Corporation, 2021. This material is for descriptive purposes only. Kubota disclaims all representations and warranties, express or implied, or any liability from the use of this material. For complete warranty, safety and product information, consult your local Kubota dealer. For the complete disclaimer, go to KubotaUSA.com/disclaimers and see the posted disclaimer.

ET0321_04-19_Earthmoving_BC_dh.indd 5

2/24/21 12:24 PM

EARTHMOVING Products Mecalac TA3SH Power Swivel Site Dumper

Doosan DX42-5K and DX50-5K Compact Excavators Kubota KX057-5 Compact Excavator The 47.6-gross-hp KX057-5 compact excavator offers improved technology and ample cabin space.

• Features a digging depth of 12 ft. 9 in. and bucket breakout force of 10,172 lbs.

• Technology features include a fullcolor 7-in. LCD screen that provides information at a glance • Available in canopy or cab models • Quieter cab with more comfort features • Optional keyless start enables the engine to be started with a four-digit code, and up to 10 user passwords can be set

The 10,114-lb. DX42-5K and 11,486-lb.

DX50-5K offer maximum dig depths of 10 ft. 5 in. and 11 ft. 5 in. and are powered by fuel-efficient 42.6- and 49.7hp Doosan three-cylinder diesel engines.

• Dual-flange track roller system works with an enhanced counterweight for better over the side digging and lifting capabilities • Dozer blade top edge has a more durable design and a blade and frame designed with angled top and rounded edges • Easy to reach auxiliary hydraulic couplers • Standard enclosed, air conditioned cab with wider seats, responsive joystick controls and joystick buttons and 5-in. display panel

www.forconstructionpros.com/21160460

Kato HD512LC-7 and HD514MR-7 Excavators The 28,429-lb. HD512LC-7 standard radius and 31,085lb. HD514MR-7 mini radius hydraulic excavators feature REGZAM 7th generation technology.

• Maximum digging depths of 18 ft. 4 in. and 18 ft. 2 in. and bucket digging force of 21,123 lbs. or up to 22,031 lbs. at high power • 105-hp Isuzu Tier 4 Final diesel engines • Quick-response four-pump hydraulic system with dual auxiliary hydraulics • ROPS/TOPS/FOPS pressurized cabin with centralized switches and a 7-in. LCD color touchscreen monitor with standard side and rear camera feature

www.forconstructionpros.com/21135896

Takeuchi TW65 SERIES 2 and TW80 SERIES 2 Compact Loaders

Case B Series Skid Steers and Compact Track Loaders

The 200G excavator is powered by a 145hp John Deere PowerTech PSS 4.5-liter, Tier 4 Final engine and features 11% less fuel burn.

• Adjustable power modes, including ECO and POWER settings, automatically change engine rpm and hydraulic pump calibration based on the job • Hydraulic system efficiencies enable faster swing speed in applications requiring swing movements • Compatible with bucket options from .55 to 1.34 cu. yds.

• Double-sealed swing bearing system with enhanced internal grease retention • Reinforced arm-to-bucket joints maximize front joint durability and reduce maintenance intervals for axial clearance adjustment

www.forconstructionpros.com/21116227

www.forconstructionpros.com/21159585

www.forconstructionpros.com/21244586

John Deere 200G Excavator

The TA3SH Power Swivel Site Dumper features forward and swivel tipping mechanisms, allowing the load to rotate 90° on either side before being tipped.

• Payload capacity of 6,613 lbs.

• Measures 13 ft. long and 6 ft. 1 in. wide for versatility and performance, especially on confined jobsites • Heavy-duty locking device keeps the skip facing forward while on the move • Includes Start/Stop Control, Capture telematics solution and Hazard Detection • Tier 4 engine rated at under 25 hp and does not require DEF or a DPF

The B Series includes five compact track loaders and eight skid steers in radial and vertical lift patterns, as well as numerous horsepower and size classes.

• Maintenance-free Tier 4 Final engines • Offer enhanced visibility, an updated operator interface and controls, simple startup and operation and powerful breakout force and auxiliary hydraulics • Completely redesigned operator interface includes left- and right-hand posts with simple ignition, push-button operation, easy throttle control and intuitive switches for all core functions • 8-in. LCD multi-function display includes a backup camera view in a split screen with machine data

www.forconstructionpros.com/21114065

The TW65 SERIES 2 and TW80 SERIES 2 offer 11,354- and 12,700-lb. operating weights, 4,050and 4,445-lb. rated operating capacities and 11,600 and 13,960 lbs. of bucket breakout force.

• Reach and dump heights up to 8 ft. 6 in.

• 73-hp Deutz Tier 4 Final engine • Standard travel speed of 12.4 mph, or up to 24.8 mph using the high-speed road gear option and ride control accumulator • Improved cab with automotive-styled interior design, a frameless door, easy to operate function switches, inching pedal and precision pilot controls

www.forconstructionpros.com/12001140

Kobelco SK850LC-10 Excavator The 185,700-lb. SK850LC-10 excavator delivers a 31-ft.

10-in. maximum digging depth and a bucket digging force of 90,598 lbf. to achieve high work volume.

• Drawbar pull of 146,800 lbf.

• 510-hp Hino E13C YM-KSDB engine • Boasts a roughly 17% improvement in fuel economy while working in ECO-mode • Hydraulic system includes two variable axial piston pumps • Enhanced hydraulic line layout further reduces energy loss to ensure optimal performance

www.forconstructionpros.com/21205488

Wacker Neuson ET42 Excavator The 4.2-ton ET42 features a low-profile hood design, expanded side window glass, large windows and an offset boom that provide a complete view of the boom, attachment and working area.

• Three-point bucket linkage system offers a 200° angle of rotation and greater vertical digging depth • Dual flange rollers in undercarriage improve stability and provide a smoother ride with less vibration • Available in cab or canopy with cab models offering air conditioning, a four-position windshield design, 3.5-in. color display, cell phone charger and holder, air cushioned seat and adjustable arm rest • Optional angle blade or the redesigned Vertical Digging System

www.forconstructionpros.com/21123349

6

EQU IPM ENT T ODAY | March 2021

ET0321_04-19_Earthmoving_BC_dh.indd 6

www.ForConstructionPros.com

2/24/21 12:24 PM

Load up for building season Equipment and attachments for sites of all sizes.

www.ebay.com/heavyequipment

ET0321_04-19_Earthmoving_BC_dh.indd 7

2/24/21 12:24 PM

E AR T HM O V I N G Products

Gehl 650 and 750 Articulated Compact Wheel Loaders The 9,080-lb. 650 and 10,920-lb. 750 feature larger engines, higher horsepower, a digital instrumentation display, PowerA-Tach attachment mounting system and a multi-function joystick.

• 64.4-hp Yanmar (650) and 74.3-hp Deutz (750) Tier 4-certified engines • Provide 6,409- to 7,907-lb. straight tipping loads with the bucket and up to 130.5- (650) and 136.8-in. (750) bucket hinge pin heights • Z-bar type linkage allows for mechanical self-leveling action, optimal bucket dump angles, mechanical return-to-dig and greater forward reach • Articulated steering with up to 45° turning angles • Travel speeds up to 19 mph

Caterpillar Next Gen 317 and 317 GC Excavators The 40,200-lb. 317 and 38,100-lb. 317 GC provide 21-ft. maximum digging depths and 29-ft. 7-in. maximum reach at ground level.

• 130-hp Cat C4.4 (317) and 119-hp Cat 3.6 (317 GC) engines with Smart, ECO and Power (available on 317) engine operating modes • Cat Grade with 2D automatically guides depth, slope and horizontal distance to grade through the touchscreen monitor • Cat Payload technology and Cat Remote Services standard on the 317 • 317 GC comes with the Cat comfort cab and the 317 offers the choice between deluxe and premium cab designs, with both offering standard rear view and right-hand side view cameras

www.forconstructionpros.com/21139364

The 14,793-lb. TB370 compact hydraulic excavator features a load-sensing hydraulic system that provides more than 31 gpm of auxiliary hydraulic flow.

• Provides a dig depth of 13 ft. 4.8 in., maximum reach of 21 ft. 11.3 in. and bucket breakout force of 14,613 lbs.

• 56.8-hp Kubota V2607-CR-TE5B turbocharged, Tier 4 Final diesel engine with 157 ft.-lbs. of torque • Automotive-styled interior with intuitive jog dial and switch panel and 8-in. touchscreen multi-function color monitor with integrated air conditioning and radio functions • First, second and third auxiliary circuits

The 6-ton R2-Series E60 includes dual flange rollers that increase lift-over-side digging performance and slewing ability.

• Auxiliary hydraulics located on the excavator arm for easier access • Bobcat engine improves cold weather operation and includes a larger fuel filter • Cooling system with side-by-side heat exchangers controls engine compartment temperature more efficiently and improves serviceability • 7-in. in-cab touchscreen display • Optional rearview camera integrates with touch display • Optional clamp diverter valve

www.forconstructionpros.com/21195442

www.forconstructionpros.com/21200333

Liebherr R 938 Excavator

Hyundai HL930A Wheel Loader

The 12-ton AS1600 swing loader features the ability to pivot its bucket 90° to either side to discharge material, enabling improved space management on the jobsite.

• Rigid frame and automatically engaging rear axle allow bucket to pivot in either direction without reducing overall stability • Two-wheel, four-wheel and crab steering options • Bucket capacities range from 2.1 (standard) to 3.3 cu. yds.

Bobcat R2-Series E60 Compact Excavator

www.forconstructionpros.com/21205481

www.forconstructionpros.com/12207292

Mecalac AS1600 Swing Loader

Takeuchi TB370 Compact Hydraulic Excavator

The HL930A is sized to meet the needs of utility and general construction contractors, with the HL930A XT offering a 25,135-lb. operating weight and 2.5-cu.-yd. standard bucket capacity.

• 130-net-hp Cummins B4.5 Performance Series diesel engine • Includes Engine Connected Diagnostics and an enhanced onboard weighing system with automatic/manual cumulative weighing function • Eco Report analyzes loader operation status based on operator performance • Smart Power Mode reduces fuel use • HiDETECT system with radar detects rear obstacles (day and night) without blindspots and reports status of nearby moving or stationary objects

www.forconstructionpros.com/21123278

The 85,770-lb. R 938 is powered by a 299-hp Tier 4 Final diesel engine and provides a 24-ft. 11-in. maximum dig depth and up to 53,510 lbs. of breakout force.

• Available with a variety of X-shaped, lubricated-for-life undercarriage types and track rollers that are lubricated for life • Spacious, temperature-controlled cab features a pneumatic seat, 7-in. high-resolution touchscreen and a windshield that can be fully lowered • Various lighting packages available including a high-performance LED+ lighting option • Unobstructed panoramic view and rear and side monitoring cameras maximize safety

www.forconstructionpros.com/21124649

Hitachi ZX60USB-5 Compact Excavator The 13,547-lb. ZX60USB-5 reduced tailswing compact excavator is powered by a 53-hp Yanmar Tier 4 Final diesel engine.

• Provides a 12-ft. 4-in. maximum digging depth with a dump height of 13 ft. 8 in.

• Two-speed travel of 1.8 mph/3 mph • 38-gpm hydraulic pump flow and 24.2-gpm auxiliary hydraulic flow • Spacious cab with wider, easier entry and wider and taller cab glass for more visibility

www.forconstructionpros.com/21121427

Leica iXE3 3D Excavator Machine Control The iXE3 3D’s semi-automated excavator functionality controls boom, bucket, tilt and tiltrotator bucket functions to dig faster and more accurate to the target design surface and cross slope.

• Auto boom control, auto bucket control, auto tilt control and auto rotation control or any combination can be selected based on preference and application • Cross-cut surface protection prevents operator from digging into other parts of the design surface • Includes intelligent slope detection to automatically snap to the correct slope of the surface under the bucket • Rotation-controlled cross-cut combines auto bucket and auto tilt functions to match target surface regardless of bucket rotation

www.forconstructionpros.com/21203013

8 EQUIPM ENT T OD AY | March 2021 ET0321_04-19_Earthmoving_BC_dh.indd 8

www.ForConstructionPros.com

2/24/21 12:24 PM

ator

er

ace

ET0321_04-19_Earthmoving_BC_dh.indd 9

2/24/21 12:24 PM

E AR T HM O V I N G Products LBX Link-Belt Precision Grade Upgrade Kits The Link-Belt Precision Grade 2D/MG system uses technology from Trimble to provide the operator with visual and audible indication when they are above, below or at their desired target grade.

• Adds autonomous control of the boom and bucket while the operator controls stick speed to maintain a consistently smooth flat or sloping surface • Provide all necessary components, hardware and software to upgrade a standard machine to 2D/MG (Machine Guidance) or 2D/MC (Machine Control) • Can also upgrade a 2D/MG-equipped machine to 2D/MC capability • Features intuitive, easy to learn software that runs on an Android operating system

www.forconstructionpros.com/21121175

Gehl R190 Skid Loader The 6,800-lb. R190 features a 68.4-hp Yanmar Tier 4 engine and amped-up hydraulic system with an intuitive design for precise controllability.

• 1,900-lb. rated operating capacity and 120.5-in. height to hinge pin • 18.5-gpm standard or optional 31.5-gpm high-flow auxiliary hydraulics • Spacious operator station with Level II ROPS/FOPS, side-folding restraint bar and adjustable armrests, adjustable control pods, optional air ride seat and T-bar, joystick, dualhand and hand/foot control options • Customizable integrated digital display and upper-left and upper-right instrument panels for easy readout and switch access

www.forconstructionpros.com/21046507

ASV MAX-Series Loaders The MAX-Series includes the RT-65, VT-70 High Output, RT-75 and RT-75 Heavy-Duty MAX-Series Posi-Track loaders featuring a next-generation cab with 360° visibility, a more spacious operator area, fully suspended adjustable seat, 7-in. touchscreen display and more.

• Dual throttle option allows operation at a set rpm with joystick controls and increased rpm with the foot throttle without needing to adjust the dial • Roof escape hatch allows operators to get out quickly in emergency situations • Include optimized hydraulic performance and cooling capability, plus the Posi-Track rubber track system • Optional highly pressurized, all-weather cab with updated HVAC system and floor to ceiling glass areas

Hyundai A Series Excavators The A Series excavator models are powered by Cummins Performance Series Stage V engines offering more than a 10% increase in power and nearly 20% increase in torque while using less fuel.

• HX210A features a 170-hp Cummins B4.5 diesel engine, a standard operating weight of 48,720 lbs. and is equipped with a standard .80-cu.-yd.-capacity bucket • HX85A compact model has a 65-net-hp Yanmar 4TNV98C engine, a 20,390-lb. operating weight with 12-ft. 10-in. twopiece boom, .33-cu.-yd. standard bucket capacity and optional four-way dozer blade • 174-net-hp, 54,540-lb. HW250MH wheeled material handler also available

www.forconstructionpros.com/21124109

Topcon X-53x Automated 3D Excavator Grade Control The X-53x automatic excavator system allows operators to automatically control the digging depth and bucket angle.

• Operator can import design files or create a custom design from the cab using the bucket to take topo shots • Bucket follows complex designs by simply pulling back on the left joystick • Enables grade to be cut faster and more accurately and increases safety by removing the grade checker from the trench • Can add support for boom automation in tiltrotator applications • Designed to enable easy upgrade from the 2D and 3D systems to the fully automatic excavation package

www.forconstructionpros.com/21063409

Doosan DL580-5 Wheel Loader The 380-hp, 79,433-lb. DL580-5 wheel loader has a 65,455-lb. static tip load (straight), a 10-ft. 5-in. dump height and comes with a 9.0-cu.-yd. bucket.

• Provides the ability to fill a 24-ton over-theroad truck in just two passes • Reinforced Z-bar, larger profile arm and lift cylinder geometry work together to improve lifting capacity and performance • Heavier front and rear axles with six-disc outboard brakes on each hub • Standard heavier counterweight, electric steering and rear view camera • Optional Trimble LOADRITE L3180 SmartScale

www.forconstructionpros.com/21121173

www.forconstructionpros.com/21172277

Caterpillar D3 Series Skid Steers and Compact Track Loaders The D3 Series includes 16 skid-steer loader, compact track loader and multi terrain loader models offering rated operating capacities (50% tipping load) from 2,185 to 6,200 lbs. and 67.1 to 110 gross hp.

• Wider opening cab door for easy entry and exit and an added 3 in. between joystick pods for extra space inside the cab • CTLs feature standard two-speed travel and changes to the undercarriage frame and torsion axles that reduce machine pitching and rocking • Smart Technology automatically recognizes and converts machine controls to align with Smart Attachments needs • Advanced control features include Return-to-Dig and Work Tool Positioner

www.forconstructionpros.com/21087424

Gradall Discovery Series Excavators The Discovery Series D172 and D174 have 300-hp Cummins 6.7-liter engines offering greater torque to increase travel speed, hill-climbing capability and overall productivity.

• D172 features a two-wheel-drive Freightliner undercarriage and the D174 has a four-wheel-drive version • Travel speeds up to 60 mph • Telescoping, full-tilting boom has a 25-ft. reach and can rotate attachments 220° • Roomy upperstructure with all-electric joystick controls, heating and air conditioning and in-cab switch to choose from Gradall, Deere or SAE joystick pattern

www.forconstructionpros.com/21135350

10 EQU IPM ENT T ODAY | March 2021 ET0321_04-19_Earthmoving_BC_dh.indd 10

Kubota SVL65-2 Compact Track Loader The 68-hp SVL65-2 features an Advanced Multifunction Valve (AMV Valve) that provides smooth operation when using simultaneous functions, such as auxiliary, boom and bucket circuits.

• Boasts a rated operating capacity of 2,100 lbs. at 35% or 3,000 lbs. at 50%, a reach of 34.9 in. and a hinge pin height of 118.5 in.

• Includes a slide-up overhead front door and easy on/off self-leveling function • Multi-function levers provide fingertip control of all major operations • Easy-open sliding front door

www.forconstructionpros.com/21046374

www.ForConstructionPros.com

2/24/21 12:24 PM

Wacker Neuson excavators, skid steers and compact track loaders are working their way across more and more job sites in North America. Designed to provide outstanding performance, comfort and reliability, Wacker Neuson equipment saves time and money by offering excellent service accessibility and the best warranties in the industry. So, no matter what the task, Wacker Neuson has all it takes to gain traction on your next job.

Contact your local Wacker Neuson dealer or schedule a demo today at www.wackerneuson.com/request-a-demo

www.wackerneuson.com

ET0321_04-19_Earthmoving_BC_dh.indd 11

2/24/21 12:24 PM

E AR T HM O V I N G Products

Liebherr PR 736 Generation 8 Hydrostatic Drive Dozer The 56,218-lb. PR 736 G8 dozer is powered by a 217-bhp Liebherr Tier 4 Final diesel engine with Eco mode.

• Electronically pilot-controlled work hydraulics allow for swift, precise work cycles • Liebherr OAS – Operator Assistance System offers a “Free Grade” level for active blade stabilization during fine grading, “Definition Grade” level for automatic blade positioning when creating 2D grades and “3D Grade” option to model complex terrain shapes • Roof-mounted GPS/GNSS antennas standard along with onboard Active Sensor Control to stabilize all blade axis

www.forconstructionpros.com/21063560

Sany SW405K Wheel Loader

Ditch Witch SK3000 Stand-on Skid Steer The 7,600-lb. SK3000 full-sized stand-on skid steer has an open, standing operator station with a 332-sq.-in. platform that provides a 360° view of the jobsite.

• Operating capacity of 3,100 lbs. and 5,500 lbs. of breakout force • Directs up to 51 hp to the attachment for efficient and productive use of hydraulic attachments • Advanced hydraulic system comes with an 8-, 14- and 22-gpm flow setting to match flow to the job • Hydraulic-operated pins simplify attachment changes • Optional automatic ride control and dual self-leveling kit

www.forconstructionpros.com/21097609

Ranko Venieri VF5.63C Loader The Venieri VF5.63C articulated loader has a four-cylinder Deutz engine and boasts an 8,598-lb. lift capacity, 14,100-lb. breakout force and a static tipping load at full turn of 9,700 lbs.

• Maximum weight of 13,820 lbs.

• Features “Z” Kinematics, a rear oscillating axle, hydrostatic transmission and four-wheel drive • Enclosed cab offers 360° visibility, ergonomic seating, detailed LCD dash screen and very accessible controls for operator efficiency and safety

Kato CL35 Compact Track Loader The CL35-4F compact track loader has a 7,771-lb. transport weight and comes with a new color scheme and updated performance.

• 63-hp Kubota V2403 engine • 6,475-lb. breakout force • 7-ft. 8-in. dump height and 38° dump angle • 4.6-psi minimum ground pressure • 7-ft. turn radius • 6.2-mph maximum travel speed

www.forconstructionpros.com/10079761

The SW405K has an operating weight of 40,786 lbs., a full turn tipping load of 28,881 lbs. and is powered by a 252-net-hp Deutz TCD 7.8, four-cycle, turbocharged, electronic-controlled diesel engine.

• Z-bar linkage design delivers nearly 40,000 lbs. of breakout force • Comes with a 4.2-cu.-yd. bucket capacity and has a 123-in. maximum dump height • High-pressure, load-sensitive hydraulics offer a 10% to 15% reduction in energy usage • Features a boom suspension system, bucket self-leveling, return-to-dig and automatic transmission kickdown

www.forconstructionpros.com/21045807

Vermeer CTX160 Mini Skid Steer The CTX160 has a lift capacity of 1,600 lbs. and hinge pin height of 88.75 in., and pushes the load further away from the machine for dumping into a truck.

• Includes a 40-hp Kohler diesel engine and pilot-operated ground drive • Multifunctional display to continuously monitor machine readouts and diagnostics • Platform with operator presence system suspends ground drive and attachment motion if the user steps off the machine • Universal mounting plate and dual auxiliary hydraulic control enable use of a variety of attachments

www.forconstructionpros.com/21095484

www.forconstructionpros.com/21028972

Komatsu WA475-10 Wheel Loader The 56,240-lb. WA475-10 combines a 290-hp SAA60125E-7 Tier 4 Final diesel engine and a Komatsu Hydraulic Mechanical Transmission that enable up to a 30% increase in fuel efficiency.

• Provides a 5.5- to 5.8-cu.-yd. bucket, up to 44,332 lbs. of breakout force and up to a 45,283-lb. static tipping load • Independent Work Equipment Control simplifies operation and reduces fuel consumption by separating the accelerator pedal from work equipment speed • Boom lift force increased by 20% and breakout force improved by 8% • Auto hill holding function enables the unit to remain stationary on a slope without using the brakes

www.forconstructionpros.com/21122084

12 EQU IPM ENT T OD AY | March 2021 ET0321_04-19_Earthmoving_BC_dh.indd 12

Toro e-Dingo 500 Compact Utility Loader The e-Dingo allows end users to realize all the benefits and power of a standard compact utility loader with no fuel costs and zero exhaust emissions.

• Lithium-ion battery technology designed for tasks that require heavy or continuous operation in indoor applications • Maximum operating capacity of 515 lbs.

• Features 4-Paw independent fourwheel-drive system and true spin-turn performance • Compatible with several existing Dingo attachments • Allows operators to utilize several power modes to conserve energy, including Auto Idle feature

www.forconstructionpros.com/21123625

Volvo L60H, L70H and L90H 2.0 Wheel Loaders The H-Series 2.0 updates to the L60H and L70H wheel loaders provide improved fuel efficiency and enhanced productivity features.

• Tipping load increased by 1.7% for the L60H, 1.6% for the L70H and 3.4% for the L90H, with dump height increased 3 in. for the L90H • Lockup torque converter (L70H to L90H option) lowers rpm and increases speed for faster cycles times • Smart Control function ensures correct torque in all situations, and the Rim Pull Control function reduces wheel spin and slippage • Electro-servo hydraulic controls (L70H and L90H)

www.forconstructionpros.com/21018916

Wacker Neuson Dual View Dumpers The 6-ton DV60, 9-ton DV90, and 10-ton DV100 dual view (DV series) articulated dumpers allow the entire operator’s console to swivel 180° so the operator is always facing the task.

• Permit dumping from the front of the skip or the skip can be rotated 90° in both directions to dump from either side • Hydrostatic drive with maximum travel speed up to 18.6 mph • Offers payloads of 13,228, 19,841 and 22,046 lbs.

• Canopy or cab versions available • Multi-functional display with a rear view camera and lockable anti-vandalism protection

www.forconstructionpros.com/21046957

www.ForConstructionPros.com

2/24/21 12:24 PM

ET0321_04-19_Earthmoving_BC_dh.indd 13

2/24/21 12:24 PM

E AR T HM O V I N G Products John Deere L-Series Utility Loaders

KOVACO Elise 900 Electric Skid Steer

The 152-hp 524L, 166-hp 544L and 192-hp 624L are powered by John Deere 6.8-liter, Tier 4 Final diesel engines.

• Electrohydraulic loader controls with integrated third- and fourth-function auxiliary hydraulics • Ergonomically designed, seat-mounted right-hand joystick with forward-neutral-reverse switch and fully integrated auxiliary hydraulic controls • Standard parallel lift linkage • Return-to-dig settings can be set from the cab for both directions of the bucket

The Elise 900 has three electric motors, two of which are used for travel and one for the hydraulic system only.

• Upgrading to a 400Ah battery increases working time 30% to 40% and rated operating capacity from the standard 1,984 to 3,000 lbs.

• Planetary gearbox in each wheel reduces electric motor speed to the desired travel speed • Features a vertical and horizontal shovel alignment function, self-leveling bucket and 11.81-ft. boom height • Provides easy interconnection with a mobile app for remote operation

www.forconstructionpros.com/21040276

www.forconstructionpros.com/21133219

Caterpillar 415 to 430 Backhoe-loaders The 415, 416, 420, 420 XE and 430 are powered by 70 to 107-net-hp Cat C3.6 Tier 4 Final engines.

• Operating weights from 15,246 to 22,355 lbs. with loader lift capacities from 6,730 to 7,230 lbs. and maximum dig depths from 14 ft. to 15 ft. 2 in.

• 420 XE offers up to 15% more boom lift capacity as well as seat controls that enable dual mode capability • Electronic loader controls on the 420 XE enable selectable parallel lift, programmable loader kickout and returnto-dig on an LCD touchscreen display • Selectable power management modes on the 420, 420 XE and 430 offer a Standard Mode or Standard Plus Mode to maximize backhoe implement speeds

www.forconstructionpros.com/21120655

HERE FOR ANY JOB. ANYTIME. Starting with the highest quality of equipment, KATO is built to handle the toughest projects on the most rugged terrain. KATO’s versatile line of rubber-track crawler carriers, ranging from just 6,400 lbs. to more than 31,000 lbs., meets the needs of any job-site. In addition to their standard earth-moving application, KATO’s crawler platform can be outfitted with cranes, digger derricks, tankers, welding units, aerial utility platforms, and more. Additionally, KATO’s US-based distributor, Compact Excavator Sales, is a family-owned business that puts customers first. Knowledgeable product experts are always standing by to assist with any service or maintenance issues that arise and our streamlined parts distribution minimizes downtime, keeping projects on schedule. Call today to find out how KATO’s superior service can help you achieve your goals.

Barreto 825TKL Mini Track Loader The 825TKL has a 25-net-hp Kubota D1105 three-cylinder, Tier 4 diesel engine and has a rated operating capacity of 800 lbs. at 35% of tipping capacity.

• Track carriages utilize two sets of articulated rollers to absorb impact and traverse smoothly over obstacles and uneven ground • Ground pressure of 4.6 to 5.9 psi • Secondary hydraulic tensioning system helps maintain the correct track tension in reverse • Electric-over-hydraulic drive control system • Universal attachment plate

www.forconstructionpros.com/21119692 COMP T EXCAVA COMPAC CAVA CAVA VATOR TOR SALES, LLC

800.538.1447 / www.KATOCES.com

ET0321_04-19_Earthmoving_BC_dh.indd 14

2/24/21 12:24 PM

Products EARTHMOVING

K-Tec 1228ADT Scraper The 1228ADT scraper is designed to move a heaped capacity of 28 cu. yds. with a 25- to 30-ton articulated dump truck.

• Available with telematics system for real-time earthmoving jobsite performance information linked to the office via a cloud software dashboard • Three-piece blade with a 12-ft. cutting width • Automatic cushion ride or optional ride control • Includes responsive joystick control functionality and a digital display screen inside the truck cab • Can self-load or be push loaded or top loaded

www.forconstructionpros.com/12157424

Trimble Earthworks Grade Control Platform Version 2.0 Trimble Earthworks 2.0 includes Horizontal Steering Control for dozers, which automatically controls the machine to follow any horizontal alignment without operator assistance.

• Augmented Reality for excavators enables users to easily understand 3D models, cut/fill information, slope data and other bench points and reference points on the in-cab display in context • Mastless motor grader configuration provides an improved range of blade motion • Integrated LOADRITE Payload Management displays grade control and accurate payload data on one screen

www.forconstructionpros.com/21035976

Liebherr XPower Large Wheel Loaders The L 550 to L 586 XPower loaders feature 39,022- to 71,871-lb. operating weights, tipping loads from 26,896 to 47,620 lbs., bucket capacities from 4.19 to 7.85 cu. yds. and breakout force from 28,101 to 58,450 lbs.

• Power split driveline combines hydrostatic and mechanical drives for maximum efficiency in all loading cycles • Liebherr-Power-Efficiency (LPE) optimizes interaction between the diesel engine, gearbox and working hydraulics • Incorporate stronger axles and a standard automatic self-locking differential • 191- to 354-hp Tier 4 Final engines operating at a low 1,100 to 1,300 rpms • Variety of intelligent assistance systems available

www.forconstructionpros.com/12134676

Connected to your success Now you can stay connected to your fleet and your business – instantly.

From a cell phone, laptop or tablet, simply log on to My Komatsu, your free online portal for remote fleet management, parts ordering and tracking, parts and service news, and other real-time, customized information. mykomatsu.komatsu

ET0321_04-19_Earthmoving_BC_dh.indd 15

2/24/21 12:25 PM

E AR T HM O V I N G Products

Ranko VF Venieri Articulated Backhoe-loaders VF Venieri articulated multifunctional backhoe-loaders combine an articulated front loader with Z-bar kinematics and a power excavator on the back with the carry-on system (four wheels equal-size drive).

• Four models range from 8,800- to 21,900-lb. operating weights and offer 52 hp (VF 1.33B) or 106 hp • Backhoe dig depths from 9 ft. to 19 ft.

8 in. with breakout force from 5,730 to 13,450 lbs.

• Loader bucket capacities from .5 to 1.7 cu. yds. with breakout force from 5,600 to 23,800 lbs.

• Hydrostatic transmission enables speeds up to 25 mph

www.forconstructionpros.com/21259214

Bobcat R-Series T62 and S62 Loaders The R-Series T62 compact track loader and S62 skid steer are radius lift path models that feature 68-hp redesigned Bobcat 2.4-liter, Tier 4 no-DPF diesel engines and 2,150- and 2,100-lb. rated operating capacities.

• Inline engine design and a durable directdrive system ensure high performance • Redesigned cooling system with a larger, higher capacity radiator and heavy-duty steel louvers on the tailgate • Stronger cast steel lift arm sections and powerful hydraulics improve lifting capabilities • One-piece sealed and pressurized cab • Bob-Tach attachment mounting system

www.forconstructionpros.com/21200386

Wacker Neuson 100-hp Loaders The 100-hp models include the SW32 skid steer and ST40 radial lift and ST50 vertical lift compact track loaders.

• Rated operating capacities of 3,200, 3,500 and 5,000 lbs.

• Hinge pin heights of 134.8 in. (SW32) and 136.6 in. (ST50) • Kohler KDI 3404 turbo diesel engine with maintenance-free diesel oxidation catalyst and selective catalytic reduction • Cab fully tips forward with loader arms down • Control options include mechanical hand-foot (SW models), electrichydraulic (EH) hand-foot and selectable EH (ISO and H-pattern)

www.forconstructionpros.com/21110951

New Holland C Series Backhoe-loaders The 17,506-lb. B95C and 18,525-lb.

B110C backhoe-loaders feature 97and 108-hp Tier 4 Final engines with improved engine response, fuel efficiency and serviceability.

• Enhanced dump reach enables operators to dump material into the center of a truck • Provide a backhoe bucket breakout force up to 12,969 lbs. and a loader breakout force up to 14,253 lbs.

• Optional Auto Glide Ride control • Easy open, tilt-forward, one-piece engine hood for ground-level access to engine and service points

www.forconstructionpros.com/10619022

Bron 175 Utility Plow The 175 has a V75-3 vibratory plow and dual reel carrier that allow it to install multiple products in one pass.

• Cummins QSB-4.5 Tier 4 Final engine and two-speed hydrostatic drivetrain • Decelerator pedal allows for full hydraulic power to the plow in tough conditions • D4 undercarriage includes 30-in. pads to promote stability and maneuverability • Open ROPS canopy or optional heated, air conditioned ROPS-certified cab • Larger operator station allows seat to turn 90° for visibility to the front and rear • Smooth, responsive, electric-over-hydraulic controls mounted to the seat consoles

www.forconstructionpros.com/21104885

Mecalac Updated MCR Series Excavators

YOUR INDUSTRY NEWS SOURCE Construction News Tracker is the construction industry’s only regular video newscast, bringing you breaking news, top stories, and product innovations. Watch for updates every other week with construction correspondent Roger Mann.

Brought to you by:

Produced by:

The updated 6MCR, 8MCR and 10MCR crawler skid excavators provide the swiftness of a skid steer with the rotation of an excavator for versatility and enhanced travel speeds.

• Combine a three-part arm and rotating ability to deliver 360° capability • Arm can be tucked in even with a full bucket for a true zero turn radius • Feature a hydrostatic transmission and drive motors with a dedicated pump to drive the motors • CONNECT quick-coupler system allows operators to quickly transition between attachments without leaving the cab

www.forconstructionpros.com/21136452

Vermeer PTX42 Plow/Trencher The PTX42 has pivoting hand controls that can be moved from one side of the machine to the other to give the operator greater flexibility.

• Plow has a 24-in. maximum depth and trencher cuts to 42 in. deep and 6 in. wide • 46.8-hp Kubota WG1605 gasoline engine and planetary axles help reduce stress and torque going to the driveline • Center-articulated design oscillates at the point of articulation • Electronic creep control

www.forconstructionpros.com/21090062

16 EQU IPM ENT T OD AY | March 2021 ET0321_04-19_Earthmoving_BC_dh.indd 16

www.ForConstructionPros.com

2/24/21 12:25 PM

Equipment you need.

Prices you’ll dig.

Attachments, parts, and more.

www.ebay.com/heavyequipment

ET0321_04-19_Earthmoving_BC_dh.indd 17

2/24/21 12:25 PM

E AR T HM O V I N G Products

Takeuchi TL8R2 Compact Track Loader Bobcat L23 and L28 Small Articulated Loaders The 3,790-lb. L23 and 3,740-lb. L28 offer rated operating capacities of up to 1,395 and 1,534 lbs. with tip capacities up to 2,789 and 3,068 lbs.

• Lift heights of 85.4 in. and 104.3 in.

• Machine automatically enables high traction or turf safe modes based on operation • 25-hp, 2,600-rpm engine • Telescoping lift arm includes a dualcylinder design that keeps the load level as operators move the bucket • Fingertip auxiliary or telescopic controls facilitate quick, simple operation • Available Bob-Tach attachment mounting system or Power Bob-Tach system

The redesigned TL8R2 offers a tipping load of 6,041 lbs. with an operating weight of 9,182 lbs.

• 74.3-hp turbocharged, Tier 4 Finalcompliant engine with a diesel oxidation catalyst (DOC) and DPF • Creep Mode standard on models with high-flow auxiliary hydraulics and enables forward speed to be precisely matched to a particular attachment without having to constantly meter the travel lever • Automotive-styled operator station with a 5.7-in. multi-informational color display with rear view camera and sealed rocker switch bank, low-effort pilot controls and proportional auxiliary switches • Optional pressurized cab available

www.forconstructionpros.com/21136222

Case Enhanced N Series Backhoe-loaders The N Series includes five models with ProControl, a swing dampening system that eliminates rebound on the backhoe, providing faster cycle times, less wear on components, greater operator precision and less fatigue.

• Backhoe dig depths from 14 ft. 4 in. to 15 ft. 5 in. with breakout force from 11,517 to 15,853 lbs.

• Engine ECO Mode includes ECO settings in both loader and backhoe functions to provide up to 10% fuel savings with minimal loss in productivity • Auto engine idle and auto shutdown • Drivetrain provides improved roading and gradeability, as well as more pushing power under load and greater acceleration

www.forconstructionpros.com/10175793

www.forconstructionpros.com/21121369

Dressta TD-16N Dozer The 170-net-hp TD-16N dozer has an operating weight of 42,090 lbs. and features a mid-cab design with all-round visibility encompassing 309°.

• Mid-mounted automatic dual path hydrostatic drivetrain • Standard six-way angle blade • Compatible with 2D and 3D grade control systems • Easily accessible, intuitive electrohydraulic joystick controls • Undercarriage design uses a single-track gauge for all track shoe widths, allowing easy reconfiguration from standard to LGP undercarriage simply by changing the track shoes and blade

www.forconstructionpros.com/21121146

Komatsu intelligent Machine Control 2.0 The intelligent Machine Control (iMC) is a suite of features that use advanced machine technology to increase dozer productivity.

• Available on the 131-hp D51i-24 and 168-hp D61i-24 dozers • Proactive dozing control measures terrain and uses that data to automatically cut/ strip from existing terrain • Lift layer control automatically lets operators spread fill from existing terrain with the press of a button • Can operate automatically 100% of the time • Tilt steering control automatically tilts blade to maintain straight travel during rough dozing

www.forconstructionpros.com/21121703

Kubota L47 and M62 Tractor-loader-backhoes The 47.1-hp L47 and 63-hp M62 four-wheel-drive loader and landscaper utility tractors incorporate the HST Plus transmission, which automatically controls the hydrostatic pump and drive motor to provide optimal control.

• Feature Tier 4 Final engines and come in tractor-loader or tractor-loader-backhoe configurations • Transmission includes standard Stall Guard Plus and Backhoe Crawling Mode • Boast digging depths of 10 ft. and 14 ft.

2.4 in. and bucket digging force of 5,825 and 6,572 lbs.

• Feature an independent PTO, throttle-up switch and low-effort electronic throttle lever and PTO switch

www.forconstructionpros.com/12130882

The D1, D2 and D3 Next Generation small dozers feature operating weights from 18,240 to 21,150 lbs. with blade capacities from 1.99 to 3.06 cu. yds.

• 80- to 104-net-hp C3.6 diesel engines meet Tier 4 Final standards and include Eco Mode • Lower sloping hood line improves visibility to the peripheral view and blade cutting edge • Larger 10-in. primary display with color touchscreen • Standard Automatic Traction Control, Slope Indicate and Stable Blade and available Slope Assist • Power Pitch option controls blade pitch remotely from the operator compartment

JCB 1CXT Compact Backhoe-loader The 1CXT compact backhoe-loader combines the material-handling and excavating capability of a backhoe-loader with the maneuverability of a compact track loader.

• Transport weight of under 9,600 lbs.

• Delivers a loader bucket breakout force up to 5,180 lbf. and maximum dig depth of 10 ft.

• Tracks enable enhanced climbing capability, pushing power, stability and soft ground performance • 49-hp Perkins engine with 122 lbs.-ft. of torque requires no diesel exhaust fluid or replaceable DPF • Hydraulic system includes a 24.6-gpm auxiliary circuit

www.forconstructionpros.com/21104980

To learn more about earthmoving and related products, visit www.forconstructionpros.com/directory

www.forconstructionpros.com/21133497

ET0321_04-19_Earthmoving_BC_dh.indd 18

The L-Series backhoe-loaders include engine upgrades, pressure-compensated load-sensing (PCLS) hydraulics on the 310SL and machine control improvements.

• 310L, 310SL, 315SL, 310SL HL and 410L now feature a 4.5L John Deere PowerTech EWL Tier 4 Final engine that boosts horsepower across the models • Lift mode added to the 310SL, providing up to a 10% to 15% increase in backhoe lift capacity • AutoShift technology available as a base offering on the 310SL, 315SL, 310SL HL, 410L and 710L • Optional Auto Ride Control • 310L EP includes a simpler frontaxle design and a four-speed manual synchromesh transmission

www.forconstructionpros.com/21204857

Caterpillar D1, D2 and D3 Next Generation Small Dozers

18 EQUIPM ENT T ODAY | March 2021

John Deere Upgraded L-Series Backhoe-loaders

www.ForConstructionPros.com

2/24/21 12:25 PM

s

MADE FOR AMERICA AMERI CA

SERVICE S ERVICE

THAT’S LOCAL L OCAL SCHEDULE S CHEDULE

A DEMO

TODAY T ODAY WITH A LOCAL DEALER

sanyamerica.com

Compact Radius

SY155U

©2021 SANY America, Inc.

ET0321_04-19_Earthmoving_BC_dh.indd 19

2/24/21 12:25 PM

ATTACHMENTS Products

Minnich A3/A6 Dowel Pin Drills Antraquip Rockwheel Attachments Carbide rockwheels and diamond saw attachments are available for excavators of all sizes and various applications.

• Carbide rockwheels offer a cutting solution for soft to medium hard rock and concrete cutting applications with a minimum width of roughly 2 in.

• Diamond saw rock wheels (AQD Series) cut the hardest rock including granite, basalt, etc., as well as reinforced concrete

www.forconstructionpros.com/21045623

The A3/A6 pneumatically powered, machine-mounted drills can be mounted to an excavator, backhoe or skid-steer loader to form a self-contained and highly mobile drilling solution for fulldepth repair.

• Feature up to six drills • Carrier used to transport the drill, eliminating operator fatigue and improving safety • Available side-shift functionality enables operators to drill a second set of holes without having to reposition the carrier • Optional dust collection system available

Level Best Precision Grader Blade

www.forconstructionpros.com/20861565

www.forconstructionpros.com/21124713

The GB-108 Precision Grader Blade is a 108-in.-wide rugged blade that adjusts in four directions and works with all makes of 2D and 3D guidance systems.

• Works with GPS and robotic total station (RTS) systems, as well as manually • Fits all popular makes of compact track loaders • Enables high-precision grading of subsurfaces to within 0.1 in. of spec • Suitable for new construction, parking lots and wherever precision grading is an advantage

Leading Edge Multi-DigNRip V-Raptor Bucket The Multi-DigNRip V-Raptor Bucket (MDNRVRB) features a ripper/bucket combination for excavators and backhoes.

• Can be used to rip rock, coral or frozen ground, pry out and carry stumps and cradle boulders • Rips a clean narrow V trench for utilities • Scoops and loads material • Manufactured with high-strength Swedish Hardox 400 alloy steel • Available for any backhoe, mini-excavator or excavator weighing over 6,000 lbs.

Allied Rammer Small Range Breakers The 555, 777 and 999 Rammer small range breakers are designed without tierods and incorporate the Constant Blow Energy (CBE) plus operating system.

• For carriers from 7,500 to 27,600 lbs.

• Integrated one-piece tool bushing design requires fewer parts and is easily field replaceable • Box-type housing with high-tech dampening material reduces noise and vibration and fully protects the power cell • Dual accumulator (High Pressure and Low Pressure) design provides maximum power with less pulsation in hydraulic lines

www.forconstructionpros.com/12138533

www.forconstructionpros.com/21106160

Vacuworx SL 2 Subcompact Vacuum Lifting System The next-generation SL 2 Subcompact Vacuum Lifting System is available with a standard 24” x 24” pad or 12” x 36” pad for handling more narrow trench cuts, with other sizes upon request.

• Base unit and pad weigh roughly 100 lbs.

• Can be used on carriers with or without a case drain • Maintains a lifting capacity up to 2,700 lbs.

• Features quick-connect hydraulic hoses and a factory preset flow control valve • Requires a minimum 10 gpm with a maximum of 3,000 psi • Manual or wireless remote control

www.forconstructionpros.com/12217057

20 EQU IPM ENT T OD AY | March 2021 ET0321_20-23_Attachments_CB_rev.indd 20

www.ForConstructionPros.com

2/24/21 6:47 AM

ATTACHMENTS Products

Kenco Slab Crab with Serrated Teeth

Loftness Battle Ax Excavator Mulching Attachment The Battle Ax mulching attachment for 4.5- to 20-ton excavators has a rotor with unique depth gauges to maximize the productivity of knives and carbide cutting teeth.

• Two-stage cutting chamber • Powerful direct drive with a variable displacement piston motor capable of turning the rotor between 1,600 and 2,500 rpm • Staggered spiral tooth pattern with singlebolt tooth mounting for easily reversing or replacing cutting teeth on the jobsite • Adjustable skid shoes for cutting up to 1.5 in. below grade

The Slab Crab is used to remove concrete slabs and bridge decks and can accommodate slabs ranging from 4 to 19 in. thick.

• Available for excavators from 5,000 to 150,000 lbs., as well as models sized to fit backhoe-loaders • Serrated teeth line the upper jaws to prevent slabs from sliding • Smooth lower jaw allows operator to release the slab in the desired location • Available as a direct pin-on or with the WedgeBolt Coupler System • Custom models can be fabricated to accept larger slab thicknesses

www.forconstructionpros.com/21110190

Fecon Compact Stumpex

Worksaver Power Landscape Rakes Power Landscape Rakes remove debris or sod to prepare seedbed surfaces for a new lawn or renovate an existing lawn, pulverize soil or set grade on new construction sites.

• Models available for compact/mini skid steers, skid steers and three-point PTOdriven tractors • Feature flip-up end plates, flip-up gauge wheels, choice of carbide teeth or Sabre teeth and material control bar • Replaceable bearing housings and triple seal bearings provide durability and serviceability

The Compact Stumpex is a slow speed, high torque auger-style stump grinder suitable for compact utility loaders with 10 to 20 gpm of hydraulic flow and 2,000 to 3,000 psi.

• Stepped blades of 1/2-in.-thick durable AR500 material rotate at slow auger speed for a safer work environment with faster cleanup • Hardened auger cone ensures positive draw into the stump • High torque eradicates stumps of any species from 4 to 11 in. in diameter in a single plunge • Robust drive generates up to 4,000 ft.lbs. of torque

www.forconstructionpros.com/21035699

www.forconstructionpros.com/21220715

E-Z Drill 210 Series Concrete Drill Attachments This equipment-mounted, pneumatic concrete drill series includes the three-gang Model 210-3 EQ MT, four-gang Model 210-4 EQ MT and five-gang Model 210-5 EQ MT. • Compatible with most models of backhoes and excavators • Capable of drilling 5/8- to 2 1/2-in.-diameter holes at a depth of 18 in.

• Each drill motor requires a minimum of 100 cfm for operation • Minimum of 300 cfm required to power the Model 210-3 EQ MT • User-friendly, easily accessible control panel mounted on the drill

www.forconstructionpros.com/20862622

www.forconstructionpros.com/10278334

#1 Contractor’s Choice for Mechanized Cutting Solutions!

TRENCHING, DEMOLITION, ROCK EXCAVATION, SOIL MIXING and more

UB Equipment 300 Series Breakers The 300 Series includes 13 breaker models ranging from 350- to 10,000-ft.lb. impact energy ratings.

• Available for skid steers, mini-excavators, backhoes and excavators • Feature a cradle-style bracket, meaning there are no bracket bolts to break • Nitrogen gas-assisted design • Control valves concealed inside of smaller units for added protection • Accumulator located on the side of larger models to protect the hydraulic system • Replaceable tool bushing

www.forconstructionpros.com/10085399

ROCK AND CONCRETE GRINDERS

www.antraquip.net

info@antraquip.net

For Additional Information Call 301-665-1165

CREATES BACKFILL ON DEMAND • LEAVES TRENCH WALLS PERFECT 90 DEGREES / FLAT BOTTOM TRENCH • LOW VIBRATION

www.ForConstructionPros.com

ET0321_20-23_Attachments_CB_rev.indd 21

ROCK TRENCHING ATTACHMENTS

March 2021 | EQ U I P MEN T TO D AY

21 2/24/21 6:47 AM

AT TACHM E N T S Products Epiroc ES Hydraulic Breakers

Caldwell Multi-Grapple Lifting System

The ES hydraulic breakers include the ES 60, ES 70 and ES 80 models for carriers from 2,800 to 26,500 lbs.

• Slim, compact design provides easy handling, good visibility and high maneuverability • Solid block of special casted material eliminates need for a separate guiding system, tie-rods or stud bolts • Removable piston liner increases serviceability • Integrated control valve optimizes efficiency while the energy recovery system increases operating efficiency and lowers vibrations

www.forconstructionpros.com/21201287

Rototilt Updated Tiltrotators The updated R5, R6 and R8 tiltrotators include a highpressure seal along with a rotation gear wheel with improved geometry and tighter manufacturing tolerances for smoother operation with less friction.

• Rotation gear includes a worm with built-in lubrication channels • Four models come with a rotor housing sensor that provides improved positioning through the existing RPS function • Rotation sensor in rotor housing can read an absolute position with greater precision • Software for the Innovative Control System enables easy adjustment of settings and a complete overview of the system via the in-cab display

www.forconstructionpros.com/21072438

ALLU Demolition and Quarry Crushers The crusher series includes three crusher models for excavators in the 10- to 33-ton range.

• Reversible crushing reduces potential for jamming, blockages or obstruction with rebar while delivering higher production • Feed plate design built into jaw ensures the feeding function in a fully loaded chamber delivers high rates of production with minimal risk of bridging • Simple mechanical pin adjustment for output size regulation with quick adjustment for various output specs • Clam-like crusher opening allows for easy, quick replacement of wear parts

www.forconstructionpros.com/21121513

LOW AND HIGH FLOW SKID STEERS & EXCAVATORS 10,000 LBS - 80,000 LBS

DON’T BITE OFF MORE THAN YOU CAN CHEW …OR LESS

www.forconstructionpros.com/21067900

Genesis GCG Cyclone Grinder The GCG Cyclone rock and concrete grinder features optimized pick patterns for smooth, powerful operation with lower vibrations.

• Available for 1,400- to 250,000lb. excavators • Comes with a chain, gear or direct-drive motor based on model size • Two-hose hydraulic system eliminates need for a case drain line and simplifies installation • Soft start system and protective valving protect motor from over-pressure, overheating and misuse

www.forconstructionpros.com/21004044

Stanley MB05 Small Mounted Breaker Breaker Technology CX Series Hydraulic Breakers

BATTLE AX

The multi-grapple lifting system is suited for handling irregular-shaped or inconsistent loads.

• Comes in 3,000- to 12,000-lb. standard capacities with custom models available • Three arms provide a stable lift of irregularly shaped heavy debris including rock/stone, steel scrap (including metal shavings), wooden blocks and more • Center-mounted actuator automatically locks open the grappler arms with automatic latching • Can work with a crane hook or with construction equipment such as excavators and backhoes

The CX Series small-size hydraulic breakers are suited for continuous duty in harsh environments including concrete breaking, secondary breaking in mining or quarry applications, demolition and trenching.

• Three models fit in the 400- to 800-ft.-lb. energy class and weigh from 396 to 734 lbs. with top bracket • Dual blow ratings (long and short stroke) ranging from 350 to 1,100 bpm • Recommended for carriers from 4,400 to 17,700 lbs.

• Standard silenced box with optional side plate mounting and skid-steer bracket

www.forconstructionpros.com/21118012

The MB05 breaker has a skid-steer bracket with four positions to allow work on floors and walls.

• Fits on skid steers from 4,500 to 7,000 lbs., excavators from 5,000 to 8,000 lbs. and backhoes from 6,000 to 11,000 lbs.

• Delivers 550 ft.-lbs. of impact energy and 650 to 1,550 bpm • 1,500- to 2,000-psi hydraulic operating pressure • Features only two moving parts, a direct-acting nitrogen chamber and a pin-on or bolt-on design

www.forconstructionpros.com/21081417

Danuser Mega Mixer Material-handling Bucket

EXCLUSIVE DEPTH GAUGE DESIGN Maximize productivity by not biting off too much, or too little, material at one time. The new Battle Ax rotor has unique depth gauges that optimize the material feed rate for top efficiency.

Mulching Heads

TWO-STAGE CUTTING CHAMBER Thoroughly process material with the exclusive two-stage cutting chamber featuring an adjustable primary shear bar.

Flail Mowers

Mechanical Trimmer LOFTNESS.COM

22

EQU IPM ENT T OD AY | March 2021

ET0321_20-23_Attachments_CB_rev.indd 22

The enhanced Mega Mixer material-handling bucket is designed to mix, scoop and dispense a variety of materials including bag-mix concrete.

• Features an easy to operate discharge end and 8-in.diameter with 8-in. pitch steel auger for faster mixing and dispensing • 22.8-cu.-in. motor provides improved torque • Capable of dispensing 3/4 yds. of material in 26 seconds (up to 1-in.-diameter rock) • Mounts on both sides allow material to be dispensed on the right or left side of the host machine • Two 2-ft. multi-link chutes store on the bucket

www.forconstructionpros.com/21073354

www.ForConstructionPros.com

2/24/21 6:47 AM

Products AT TACHMENTS

Okada TSWB Series Primary Crusher

Montabert V7000 Hydraulic Breaker

The TSWB concrete crushers include eight models weighing from 1,940 to 26,460 lbs. and are suited for carriers from 13 to 330 tons.

• Crushing force at tip ranges from 40 tons for the 620V to 242 tons for the 2400V • Seamless casting components and a custom tooth design enable faster material fractioning • Feature a large jaw opening, 360˚ hydraulic rotation, standard speed valve for shorter cycle times, built-in pressure relief valve and flat-mount design • High-pressure twin cylinders with cylinder rod covers (except TSWB 2200V)

MB Crushers MB-HDS Series Shafts Screeners

www.forconstructionpros.com/21131869

Felco Vibratory Compaction Buckets These Vibratory Compaction Buckets allow an excavator operator to dig, place and compact all with one attachment.

• Combine performance of a vibratory plate unit with the versatility of a bucket • Eliminate transition times when switching between separate attachments • Bucket ears manufactured to match each excavator’s OEM specs or to adapt to quick couplers • Compact granular materials by forcing air in the soil to the surface to decrease air pockets

www.forconstructionpros.com/10078341

The MB-HDS Series Shafts Screeners feature four shaft kits (RC Compost, RM Mixer, RE8/RE16 fine crusher and RQ20/RQ50 medium crusher kits) that enable them to adapt to a range of working environments and materials.

• Can crush excavation and demolition materials, asphalt, coal, organic materials, wood, bark and light plastics, plus enable products to be immediately repurposed • Can be installed on excavators, loaders and other carriers from 5 to 35 tonnes • Automated shock-absorbing hydraulic system reduces material discharge • Rotating shafts can be changed on site and include a centralized greasing system

www.forconstructionpros.com/21063572

Steelwrist TCX Tilt Coupler and S30 Quick Coupler The fully casted TCX S30-180 and S30-180 are suited for miniexcavators up to 2 tons and can be delivered with manual locking or hydraulic locking depending on customer needs.

• Include a Front Pin Safety Hook • Large pin contact surfaces and optimized material thickness for a highly robust design • Lightweight TCX S30-180 replaces the TMX tilt coupler, is easy to install and is available direct mounted with the S30 coupler (manual and hydraulic)

www.forconstructionpros.com/21197523

Oriel Attachment Product Line

The V7000 fits in the 20,000-ft.-lb. impact energy class and is suited for carriers ranging from 70 to 120 tons.

• Variable energy technology automatically adapts breaker energy according to the rock/material hardness • Automatic pressure regulator ensures optimal performance regardless of oil temperature or hydraulic conditions • Energy recovery valve captures recoil and converts it back into additional energy • Suspension system reduces vibration and wear • Includes blank fire protection, an automatic lubrication system and optional air pressurization kit

www.forconstructionpros.com/21131861

Kinshofer DXS Mobile Shears The DXS mobile shear has been engineered to deliver a scrap shear with maximum force, enhanced speed and low weight ratio.

• Can be used for a variety of tasks including demolition, scrap processing and tire recycling • Equipped with DemaPower 2.0 hydraulic cylinder technology that delivers 25% more power and faster cycle times

www.forconstructionpros.com/20988130

Increase your bottom line with job matched attachments from Worksaver.

Oriel Attachments Inc. designs and manufactures quality attachments for the construction, earthmoving and forestry industries.

• Constructed from AR steel such as Hardox and Strenx • Provides a range of weld-on and direct-mount hydraulic thumbs, grapples, heavy-duty buckets, tilting couplers, rippers and a tree shear • Simple, safe, quick couplers with a “Triple Lock” design that eliminates possible safety issues and minimizes machine downtime • Built to suit machine sizes from 6,000 to 100,000 lbs.

www.forconstructionpros.com/21244749

Alpine Rockwheel Rock and Concrete Grinders The Rockwheel rock and concrete grinders incorporate hydraulic rotary cutting technology that delivers the power and precision to make efficient, low-vibration, low-noise excavations for any application.

• Models available from 12 to 295 hp for carriers from 1 to 75+ tons • Cutting force from 949 to 32,360 lbs. with cutting widths from 11.8 to 49 in.

• Chain drive, gear drive, direct drive and axial drive versions

Patented SSGB-8B Skid Steer Grader Blade

Visit worksaver.com to learn more

www.forconstructionpros.com/12026954 Built with Sunshine and Manufactured in the USA

www.ForConstructionPros.com

ET0321_20-23_Attachments_CB_rev.indd 23

• Designed to be used by asphalt, landscaping, and concrete flatwork contractors.

• 8-foot, six-way hydraulically controlled moldboard operated by an in-cab remote.

• When matched with a laser system, allows the grader to maintain grade to tight tolerances.

Worksaver, Inc., P.O. Box 100, Litchfield, IL 62056-0100 Phone: 217-324-5973 • Fax: 217-324-3356 worksaver.com • E-mail: sales@worksaver.com

Designed. Engineered. Remarkable Value.

March 2021 | EQ U I P MEN T TO D AY

23 2/24/21 6:47 AM

TRUCKS & TRANSPORTATION Products

2021 Chevrolet Silverado 1500

Western Star 49X Class 8 Truck

The 2021 Silverado 1500 offers mechanical and technological updates, including the addition of an available Multi-Flex Tailgate.

• Multi-Flex Tailgate offers six unique functions, allowing for easy access to bed cargo, enhanced loading solutions and a standing workstation • 2.7L Turbo engine option adds thousands of pounds of trailering capacity • 3.0L Duramax turbo-diesel adds 1,900 lbs. more trailering capacity to most configurations and provides a 9,500-lb. maximum capacity to 2WD models • Includes the Trailer Length Indicator, Jack-Knife Alert, Cargo Bed View enhancement, Rear Trailer View with guidelines and Trailer-Angle Indicator and Rear Side View enhancement

The 49X features a stronger, lighter chassis and the purpose-built X-Series reinforced aluminum cab that offers more space yet added weight savings.

• Single-channel frame rails in thicknesses and ratings up to 3.7 million RBMs, or C-channel frame reinforcements in RBMs up to 5.4 million • Offers clear back-of-cab packaging for easier upfits and accommodates a full array of rear suspension options • Sloped hood constructed of highstrength, lightweight, molded composite • ISO Tech Hood Suspension system isolates, absorbs and dissipates vibrations from the chassis • Detroit DD15 Gen 5 or DD16 engine mated to the DT12 Vocational series of automated manual transmissions

www.forconstructionpros.com/21244747

K-Tec EJB Ejector Body for Volvo Articulated Trucks The Ejector Body (EJB) allows trucks to safely eject loaded material in areas with reduced overhead clearance.

• Fits Volvo A40 and A45 articulated dump trucks • Bolt-together design • Payload capacity of 40 tons

www.forconstructionpros.com/21112259

www.forconstructionpros.com/21198110

Minimizer Peterbilt Medium-duty Floor Mats These medium-duty custom-molded floor mats fit Peterbilt 337 and 348 medium-duty truck model years 2010-2020.

• Four floor mat kits • Laser-measured to exact fit • Tray system features raised edge to keep everything on the mat

The 40-ton 740 GC includes transmission protection features, a hoist-assist system, advanced traction control system, stability assist system and a fuel-saving ECO mode.

• Automatic retarder control system • “Wait-brake” temporarily applies service brakes during pauses in the work cycle • Hill-start system automatically holds the machine on grades • Advanced Automatic Traction Control (AATC) system proactively applies differential locks to avoid wheel spin • C15 ACERT engine offers from 449 to 452 gross hp • Optional Cat Connect PAYLOAD technology

www.forconstructionpros.com/21026165

The 2021 F-150 full-size pickup comes with standard over-the-air updates technology to constantly keep software on the leading edge.

• 3.5-liter PowerBoost full hybrid V6 powertrain available on every trim level from F-150 XL to Limited • PowerBoost system adds instant electric torque to the 3.5-liter EcoBoost V6, delivering at least 12,000 lbs. of available maximum towing • Pro Power Onboard offers a 2.0-kW output on optional gas engines, and the PowerBoost-equipped version comes with 2.4 kW of output or optional 7.2 kW • 12-in. center screen standard on XLT high series and above

The Ram 1500 includes a Heads-up Display, digital rearview mirror option, Trailer Reverse Steering Control, power fold trailer mirrors, Trailer Light Check and Trailer Tire Pressure Monitoring.

• Available Uconnect 4C 12-in. touchscreen • Advanced Safety Group includes Pedestrian Detection, adaptive cruise control with stop and go, Lane Keep Assist, automatic high beams, 360˚ Surround View camera and Parallel/ Perpendicular Park Assist • Features up to 12,750 lbs. of towing capability and 2,300 lbs. of payload • eTorque mild hybrid system delivers improved fuel efficiency in both V6 (standard) and V8 configurations

www.forconstructionpros.com/21244727

www.forconstructionpros.com/21244741

TRUCE Software Contextual Mobile Device Management Platform The Contextual Mobile Device Management platform automatically adjusts access to mobile apps and features based on a given work environment and additional contextual indicators, eliminating device distractions.

• Includes a web-based Management Console, mobile app and available Beacon technology to detect movement or define boundaries • Employer defines how to protect employees based on location or proximity to high-risk areas or equipment, movement time of day or day of week and user or work group • Apps and functions that help employees are kept front and center, while those seen as distracting are temporarily hidden

www.forconstructionpros.com/21295111

TRUX Contactless Ticketing Solution

www.forconstructionpros.com/21112699

Caterpillar 740 GC Articulated Dump Truck

2021 Ram 1500

2021 Ford F-150

Doosan DA30-5 and DA40-5 Articulated Dump Trucks The 365-hp DA30-5 and 490-hp DA405 are equipped with Scania DC9 and DC13 Tier 4-compliant diesel engines.

• 61,729- and 88,185-lb. payload ratings and 23.3- and 34-cu.-yd. heaped capacities • Mass airflow sensor allows the ECU to improve airflow management from the variable geometry turbocharger and optimize fuel delivery to the combustion chamber • Feature improved gear ratios for reduced axle speed, a front-mounted turning ring, sloping rear frame, tandem rear bogey and independent front suspension

Trux Contactless Ticketing is a robust e-Ticketing solution that integrates sales orders and scale tickets directly into technology solutions for all participants in the material supply chain.

• Allows contractors, dump truck drivers and material producers to safely and digitally record and track data from construction projects • Leverages unified digital dispatching, hauling and site contact load tracking and resolution software • Meets established requirements from the leading state DOTs across the country for digital ticketing

www.forconstructionpros.com/21139310

www.forconstructionpros.com/12021260

24 EQU IPM ENT T OD AY | March 2021 ET0321_24-31_Trucks_CB_Rev.indd 24

www.ForConstructionPros.com

To learn more about fleet

2/25/21 6:07 PM

Tougher made smarter On the jobsite you need a truck that’s tough, safe, and smart. So, we built the Volvo VHD to be the best-looking, most rugged vocational vehicle in the industry, packed with innovative ideas like Volvo Active Driver Assist and the revolutionary Volvo Dynamic Steering. Your toughest jobs just got easier.

Learn more at volvotrucks.us/vhd

The Volvo VHD ET0321_24-31_Trucks_CB_Rev.indd 25

2/25/21 6:07 PM

T R U CKS & T R A N S P O R TAT I O N Products

Eager Beaver 50 GSL-PT Paver Trailer The 50 GSL-PT has a 100,000-lb. load capacity and 122,700-lb. GVWR and is suited for loading rollers, pavers and milling machines.

• Tapered four-beam, 16-in.-deep cambered I-beam mainframe and side rails • 10-in.-deep crossmembers pierced through the mainframe • 25,000-lb. axles with all-wheel ABS (4S3M) with spring brakes on all axles • Cush Air Ride suspension with 75,000-lb.-capacity air lift third axle

www.forconstructionpros.com/20979451

TruckIT Web and Mobile App TruckIT launched a comprehensive upgrade to its cloud-based technology suite for construction dispatching and electronic ticketing solutions.

• Includes simplified dispatch workflows, a unified mobile app and redesign offering the full capabilities of the web portal, centralized project reporting and analytics and enhanced load material monitoring • DOT-compliant E-Ticketing solution operates as a fully automated and paperless electronic ticketing system • AirTicket add-on component easily integrates directly with any existing scalehouse system

This road facing dashcam uses AI and machine learning to help categorize harsh driving events.

• Begins recording once engine is turned on and continues until engine is off • Reviews footage based on driver behavior triggers and classifies it as a collision, dangerous, harsh driving or low risk • Video viewable in the Reveal fleet management software on mobile or desktop within minutes of the event or can be downloaded for later use • Identify driver and speed and see vehicle location with GPS tracking • Alerts when a video is available

www.forconstructionpros.com/21130585

www.forconstructionpros.com/21136272

Volvo VHD The VHD includes a number of upgrades, including an updated exterior, safety and productivity features, new bumper and the latest in connectivity solutions.

• I-Shift transmission with crawler gears adds one or two gears to the 12-speed version • T-Ride suspension applies constant pressure on the wheels to create sure-footed traction • Includes Dynamic Steering and the next generation of Active Driver Assist • Bumper features a heavy-duty 45mm tow pin rated for a full 80,000 lbs.

• Includes Remote Programming and Remote Diagnostics

www.forconstructionpros.com/21244811

Verizon Connect Integrated Video

Freightliner 114SD with Cummins X12 The 2,050-lb. Cummins X12 engine can be spec’d in the 114SD, delivering up to 500 hp and 1,700 lbs.-ft of torque.

• Engine offers a low-friction design and is compatible with fully automatic, AMT and manual transmissions • Features a GVW up to 92,000 lbs. and has a clear back of cab for easy upfit • Available as set-forward front or set-back axle and with a range of vocational rear suspensions and frame options up to 5 million RBM • 114-in. BBC steel-reinforced aluminum cab features a 2,500-sq.-in windshield and contoured hood slope for maximum visibility

www.forconstructionpros.com/21046598

Lytx Badge Driver Identification Solution This driver identification solution detects a driver’s ID using a QR code without requiring any additional hardware.

• Driver scans a unique QR code either from a badge or cell phone using the installed DriveCam Event Recorder • Driver’s name recorded along with vehicle data for visibility into worker and vehicle data including a driver’s hours, how much time the vehicle is moving during each shift and how much idle time occurs • Automatically assigns events captured by DriveCam to the appropriate driver • Works with Driver Safety, Risk Detection and Fleet Tracking modules

$

NO

www.forconstructionpros.com/21159835

Air-Tow E-16 XL Extra Large Enclosed Trailers The 10,000-lb.-capacity E-16 XL is the largest enclosed trailer in the Air-tow line of ground-level loading trailers and comes preloaded with many features.

• Lowers flat to the ground for safe loading and unloading and transport of any type of equipment.

• Offers a 75-in. deck width and a length of 15 ft. 9 in.

• 838 cu. ft. of total storage space includes a 15-in., 36-cu.-ft. shelf at front of enclosure that is easily accessible from inside and via a passenger side compartment door • Standard self-locking roll-up door, two LED interior lights and a 3/8-in. plywood interior lining

www.forconstructionpros.com/21118796

26

EQUIPM ENT T ODAY | March 2021

ET0321_24-31_Trucks_CB_Rev.indd 26

www.ForConstructionPros.com

2/25/21 6:07 PM

Products TRU CKS & TRANS PORTATION

2021 GMC 1500 and HD Pickups

John Deere E-II Articulated Dump Trucks The 410E-II and 460E-II feature a redesigned dump body with an increased width, lowered and leveled rail height, side sheet design and widened bin.

• Operator station includes a primary display unit for daily operation and enhanced diagnostic information, a single sealed switch module, automotive-style multifunction turn signal lever and relocated HVAC controls • Normal, Eco and Traction drive modes • Simplified retarder controls include low, medium and high transmission retarder modes • Ejector body solution available (460E-II)

www.forconstructionpros.com/21195639

The 2021 Sierra 1500 features increased conventional trailering capability for two of its most efficient engines.

• 3.0L Duramax Turbo-Diesel adds up to 1,900 lbs. of trailering capacity on 2WD models with a max capacity of 9,300 lbs.

• 2.7L Turbo adds 2,300 lbs. of trailering capacity to nearly every configuration with a max capacity of 9,200 lbs.

• Towing technologies now include Trailer Length Indicator, Jack-Knife Alert, Rear Trailer View with guidelines and trailer angle indicator, Rear SideView enhancement and cargo bed enhancement • Cargo Bed Zoom View and Bed Hitch Guidance now available

www.forconstructionpros.com/21244722

Talbert Tag-A-Long AC Series The 10- to 25-ton Tag-A-Long Austin Carry-All Series (AC Series) trailers feature loaded deck heights, durable construction and a low,\ 7° load angle to transport small- to mid-size equipment.

• Dual-axle AC-10 offers a 10-ton, 20,000lb. capacity, 24-ft. deck length, 5-ft. 5-in. self-cleaning, spring-assisted rear ramps and 32.25-in. loaded deck height • AC-20 provides a 20-ton, 40,000-lb. capacity within the same deck dimension and loaded deck height • AC3-25 has a 29-ft. deck and a 25-ton, 50,000- lb. capacity with a 32.75-in. loaded deck height • AC-20ART and AC3-25ART include an air ramp and/or air tilt for loading of low-clearance equipment

www.forconstructionpros.com/21138130

Felling Low Pro Limited The Low Pro Limited deck-over tag trailer series includes the 22 1/2-ton FT-45-2 LP Limited tandem axle and the 25-ton FT-50-3 LP Limited triple axle.

• 20-, 22- and 24-ft. available deck lengths for the tandem axle and 24- and 26-ft. deck lengths offered for the triple axle • Constructed with an 8-in. channel side rail (flange in) with 4-in. Jr. I-beam crossmembers pierced through the heavy-duty, engineered, fabricated 16-in. mainframe • 6-ft.-long double incline beavertail provides 12° and 6° load angles for safe loading/unloading of tracked equipment • 6’ x 20” spring-assist ramps include 5” x 3” self-cleaning angle construction or apitong inlay

www.forconstructionpros.com/21198119

$1,300 Down Payment

NO interest, NO payments until September 2021

THUNDER CREEK

FUEL & SERVICE EQUIPMENT Get your Multi-Tank Fuel Trailer to legally transport diesel without a HAZMAT endorsement.

go.ThunderCreek.com/et0321

866.535.7667

$1,300 down payment based on our jobsite ready, 690-gallon Multi-Tank Trailer equipped with solar battery maintainer and patented 100-gallon, 2-in-1 DEF system. Financing subject to approval. Offer valid until March 31, 2021.

ET0321_24-31_Trucks_CB_Rev.indd 27

scan here with your smartphone camera

2/25/21 6:07 PM

T R U CKS & T R A N S P O R TAT I O N Products Vanair Aluminum Reliant RC40-L and RS85

Stellar TMAX 30K Aluminum Service Body The TMAX 30K Aluminum Mechanic Truck Service Body weighs 1,300+ lbs. less than its steel counterpart yet can accept a 30,000 ft.-lb. rated service crane or smaller.

• Designed to lift 6,000 lbs. or less • Extruded aluminum side pack tops with two accessory mounting rails enable easy, secure mounting and relocating of accessories • Torq-Isolator torsion box understructure and crane compartment isolate lifting forces into stabilizers and chassis frame • Side compartments constructed of 1/8-in. high-strength aluminum floors and walls • Double-panel aluminum doors

www.forconstructionpros.com/20979625

Komatsu HD785-8 Off-highway Truck The HD785-8 is powered by a 1,140-hp Komatsu SAA12V140E-7 Tier 4 engine and has a payload capacity of 101.6 tons.

• Auto idle shutdown and auto idle setting system • Tight turning radius of 33 ft. 2 in.

• Standard traction control system • KomVision all-around machine monitoring system • Seven-speed, fully automatic transmission with two selectable reverse speeds • Automatic retard speed control • Cab with air suspension, heated, ventilated seat and upgraded trainer seat, Komtrax Plus telematics, upgraded monitor and dedicated rear view monitor

www.forconstructionpros.com/21133876

XL Low-profile HDG Trailer The Low-profile Hydraulic Detachable Gooseneck (HDG) trailer has a 110,000-lb. capacity in 12 ft., an overall length of 53 ft. and overall width of 8.5 ft.

• Includes a 26-ft.-long main deck with a loaded deck height of 24 in. and an 8-in. ground clearance and 14-ft.-long rear deck with a 40-in. loaded deck height • Tapered front beams offer an extremely low load angle of only 4° and 42-in. flip ramps provide extra loading assistance • 13-ft. gooseneck has a swing clearance of 110 in., a relief cut-out for added space between the truck and trailer and a sloped nose to protect the air and electric connections from damage • Five-position ride height

The aluminum canopy and air end reduce the weight of the Reliant RC40-L by 40% and the Reliant RS85 by 30% over the standard models.

• Rust-resistant and durable RC40-L offers 40 cfm of air power with hydraulic cooling assist for additional hydraulic systems • Include a relocatable instrument panel for mounting flexibility on and off the unit and reversible hinged hood for flexible positioning • Easy to read display panel available as a standard mechanical gauge or optional telematicscapable LED electronic panel • Optional cold weather package

www.forconstructionpros.com/21123087

IMT 11-ft. Dominator III Mechanics Truck The Dominator III 11-ft. mechanics truck is capable of working in tighter quarters, maintaining stability and providing extra lift performance in critical work zones.

• Upgraded 25-ft. telescopic crane features a 440-lb. weight reduction and increased crane rating to 81,000 ft.-lbs.

• Crane can easily clear a 12,000-lb. load • Available with a 159.7- to 164.9-cu.-ft. compartment storage capacity and 52- to 60-in. sidepack height • Standard energy-absorbing boom support, multiplex electrical system with programmable logic and rear access package

www.forconstructionpros.com/20864168

Curry Supply On-road Fuel/Lube Trucks The 2,000-gal. on-road fuel/lube trucks are built from the ground up and configured to any specifications with custom options.

• Four 100-gal. oil tanks standard • 85-gal. anti-freeze capacity • 50- to 75-gal. DEF system • 120-lb. grease system • Hydraulic-driven pumps (fresh oils only) and 30-cfm compressor

www.forconstructionpros.com/12293798

www.forconstructionpros.com/21126267

Dakota Bodies Gen II Service Body The Gen II weld together service body provides a long-term, solid connection between parts to achieve enhanced structural integrity.

• Universal mounting kit to fit 2020 and newer Ford, Ram and GM chassis • Compression T-handle door latches • Cast aluminum fenderettes • Silver zinc finish tailgate brackets • Fuel filler cup in streetside fender • Modernized bumper appearance

www.forconstructionpros.com/21220015

VMAC DTM70-H Multi-Power System The direct transmission-mounted DTM70-H is a configurable solution for service trucks fitted with hydraulic cranes or other hydraulic components.

• Priority valve and intelligent throttle control system allow for variable air-on-demand with increased cfm output while providing steady gpm output • Fixed mode with preset low engine rpm used for running hydraulic equipment and providing a steady rate of compressed air, or variable mode enables engine rpm to increase and decrease automatically based on air demand • Hydraulic bypass circuit with priority flow control valve diverts excess hydraulic flow back into the reservoir tank

www.forconstructionpros.com/21050162

28 EQUIPM ENT T OD AY | March 2021 ET0321_24-31_Trucks_CB_Rev.indd 28

Maintainer H8524 Service Crane The H8524 hydraulic telescopic crane has a maximum lift capacity of 8,500 lbs. and a reach of 24 ft. 6 in.

• Includes a 52,500-ft.-lb. crane rating and a boom-mounted planetary winch • Offers a total operational range of 91° (-13° to +78°) and 615° of boom rotation • Features Advanced Crane Control 2.0, which provides better visibility of lifting loads and error codes if instability with a lift is detected • Includes a proportional wireless remote, low-profile boom, tall and short tower configurations and a closed-center/loadsensing hydraulic system • Recommended for chassis with a minimum GVW of 22,000 lbs.

www.forconstructionpros.com/21072630

Mack Granite Vocational Truck The Granite has a redesigned, purposebuilt interior that minimizes driver wear and tear and maximizes comfort.

• Includes a flat-bottom steering wheel for more belly room and clearance for entry or exit and Sears Seating for improved driver comfort and support • mDrive HD automated manual transmission with optional 13- and 14-speed creeper gears • Axle forward and axle back configurations and a tight turning radius improve maneuverability • Choice of rail thicknesses to spec vehicle for the rigors of the job • Top-mounted rear axle carriers minimize driveline angle and improve fuel efficiency and ground clearance

www.forconstructionpros.com/21092126

www.ForConstructionPros.com

2/25/21 6:07 PM

If you work there, we work there.

Used in the wrong place or time, mobile phones can put employees in danger and companies at risk. Those incessant pings and buzzes are constantly stealing our focus.

So why settle for safety measures that sometimes work?

TRUCE Software is a simple way to manage mobile device distractions. TRUCE recognizes situations with higher risk and automatically hides the apps and features you specify.

Then automatically reveals them again when the risk is gone. Helping to bring your mobility vision to life.

So when employees are at work, we’re at work making them safer. No matter where that is.

trucesoftware.com

ET0321_24-31_Trucks_CB_Rev.indd 29

2/25/21 6:07 PM

T R U CKS & T R A N S P O R TAT I O N Products Fontaine Magnitude 55L Lowbed Trailer

Thunder Creek Expanded Multi-Tank Platform

The Magnitude 55L advanced technology lowbed trailer handles 55 tons in just 13 ft.

• Operates close coupled only for lower overall weight with additional payload capacity • Fabricated with 100,000-lb. minimum yield steel flanges • Boasts a 26-ft. clear deck length and a loaded deck height of 18” with 6” of ground clearance • Hydraulic removable gooseneck can be connected and disconnected in seconds and can connect/disconnect on uneven ground

The MTU bulk diesel hauling platform provides better control of fueling and DEF management without requiring a CDL or HAZMAT endorsement.

• Re-launched on the Ram chassis and is equipped to carry 920 gal. of bulk diesel contained in separate 115-gal. fuel tanks • Rear utility box houses the diesel pump and manifold system • Optional heated diesel exhaust fluid handling system for use in colder climates • Options include a variety of meters for measuring, security and tracking, numerous reel options and lengths, a 4-micron filter and available color schemes

www.forconstructionpros.com/21139676

www.forconstructionpros.com/21059638

International Next-generation HX Series Severe Service Trucks The set-forward axle HX520 and set-back axle HX620 feature a redesigned, extreme-duty cab with a durable, three-piece hood engineered to offer front-forward visibility.

• Bendix integrated driver assist technology • Available with dual steering gears and advanced antilock braking systems for enhanced turning, traction and control • HX620 comes with the International A26 engine delivering up to 500 hp in a lightweight package • Both models available with the Cummins X15 engine in ratings up to 605 hp and 2,050 lbs.-ft. of torque • Available manual, automated manual and automatic transmissions

Trail King Commercial MG-HG Detachable Gooseneck Trailer

www.forconstructionpros.com/21203231

www.forconstructionpros.com/20984368

The Commercial MG-HG detachable gooseneck trailer is engineered to accommodate four interchangeable gooseneck styles.

• Standard full-width mechanical gooseneck or can be ordered in full-width or narrow-width and mechanical or hydraulic configurations • Moisture-trapping areas minimize buildup of road debris and moisture accumulation to improve corrosion resistance • Optional aluminum I-beam or box beam crossmembers, outer rails, decking and front and rear channels

East Narrow Spec Dump Trailer The Narrow Spec Dump Trailer maximizes payload with lighter weight components while still delivering strength and durability.

• Uses premium aluminum alloys for flooring and side material • Smooth-sided Genesis aerodynamic design for easier cleaning • 2-in.-thick, double-wall, robotically welded, extruded aluminum panels • 1/4-in.-thick rear corner posts wrap completely around top and bottom rails and interlock to add strength • Continuously welded, lighter weight sheet and post tailgate 90° wall joints maximize strength-to-weight ratio and joint integrity of the tailgate

www.forconstructionpros.com/21160002

Earthwave Fleetwatcher Materials Management Solution This wireless telematics system for paving contractors uses load cycle analysis to allow users to see where problems are occurring and correct them in real time.

• Electronic ticketing helps eliminate points of contact and ticket transfers inherent with paper ticketing programs • Creates individual scale tickets and provides material haul summaries for statefunded roadway projects • Provides accurate and timely reporting and scale ticket integration • Tickets and summary reports available via cell phone • Integrates with popular accounting and payroll applications and scale systems

www.forconstructionpros.com/12294134

30 EQUIPM ENT T ODAY | March 2021 ET0321_24-31_Trucks_CB_Rev.indd 30

www.ForConstructionPros.com

2/25/21 6:07 PM

Products TRU CKS & TRANS PORTATION

Aluma 8200-14K Tilt Tandem Utility Trailer The 8200-14K features all-aluminum construction and two 7,000-lb. rubber torsion axles with easy lube hubs.

• Three configurations with tilt angles of 11.5°, 9.5° or 10.5° • 101.5-in. overall widths and 288- or 308-in. overall lengths • 42-in.-long A-framed aluminum tongue with 2 5/16-in. coupler • Includes an extruded aluminum floor, removable aluminum fenders, electric brakes with breakaway kit and a 10K spring-loaded drop leg jack

Towmaster T-24TA Air-Tilt Bed Trailer The T-24TA deck-over air-tilt trailer offers convenience and easy loading by tilting the bed using air from the tow vehicle’s system.

• Features an angled beavertail and ramps to offer a low loading angle suited for small-wheeled or paver equipment • Ramps can be manual or air operated • Features a single-lever twin-latch system to secure the deck to the frame • 2-in. nominal white oak wood deck with a 34-in. height (empty) and 8-ft. 6-in. width • Includes air brakes, a dual air bag design, Hutchens adjustable suspension and LED lights and sealed wiring

www.forconstructionpros.com/21046464

Venturo ET12KX-P Electric Crane The ET12KX-P is a 3,500-lb. electrichydraulic service crane with a fully powered boom extension up to 16 ft.

• Proportional controls give the operator precise load control functions including rotation, elevation and extension • Fully hydraulic boom extension features a 9- to 16-ft. one-piece hexagonal boom • Easier access to rear housing of crane • Venturo Auto-Adjust Anti-Two Block device automatically adjusts to the boom angle • Dual-pole slip ring in the center of the crane provides consistent and uninterrupted positive and ground paths with unlimited, continuous rotation

www.forconstructionpros.com/21044832

B2W Schedule Trucking Management Capabilities The B2W Schedule application allows schedulers and dispatchers to assign, view and modify truck requirements and deliveries being fulfilled by their own fleets and by outside third-party contractors.

• Move Planner and Mass Haul Planner modules can be used to manage equipment moves and mass haul schedules • Notifications about trucking assignments, including revisions to a schedule, can be communicated automatically to drivers via text message or email • Assists in identifying and resolving scheduling conflicts and includes a Map View that uses GPS and telematics data to validate the location of resources

www.forconstructionpros.com/21130790

www.forconstructionpros.com/21204831

Some things can’t be Googled How How How How How How How

many many many many many many many

of of of of of of of

my my my my my my my

assets assets assets assets assets assets assets

are are are are are are are

being rented under utilized in need of maintenance running owned in my yard available

Autocar DC-64D Severe-duty Class 8 Truck The DC-64D severe-duty Class 8 truck is engineered for the demands of a dump truck and general construction use.

• 325° of visibility from the driver’s seat with 4,982 sq. in. of viewable glass area • Wrap-around windshield with tucked-in A-pillars maximizes forward visibility • Ultra-high-strength, 160,000-psi steel frame rails enable the unit to handle up to 1,700 lbs.-ft. of torque and an 80,000lb. towing capacity • Offered in diesel and CNG/LNG options • Large cab space with ample foot, leg, hip, elbow and shoulder room and fully adjustable seat and steering column

Go Beyond Tracking Get the answers you need.

www.forconstructionpros.com/21201685

CM Truck Beds Gen 2 SB Service Body The Gen 2 SB service body includes several upgrades that combine enhanced functionality with features ranging from rugged stainless steel fenders to the aluminum cast square fuel fill.

• 16-gauge (G60) galvanized steel body with TexArmor powder-coat finish • Universal bolt-on crash zone bumper • Three toolboxes on each side available with multiple configurations, including vertical and horizontal options • Steel-braided door holdback cables • Can be customized by adding side flip-tops, heavy-duty overhead racks, slide-out drawers, shelving, lighting and more

tenna.com • 833.50.TENNA

www.forconstructionpros.com/21221093

www.ForConstructionPros.com

ET0321_24-31_Trucks_CB_Rev.indd 31

March 2021 | EQ U I P MEN T TO D AY

31 2/25/21 6:07 PM

FLEET MANAGEMENT Products Volvo Penta Stage V Off-road Diesel Engines

American Eagle LubeMate Aluminum Lube Skids Six aluminum LubeMate lube skids are available including the V90, V120 and V160 Mobile and Permanent models.

• 30% lighter than their steel counterparts • Manufactured with 3/16th aluminum featuring enhanced corrosion resistance • Three mobile standards include the V-110 (55-gal. new oil, 55-gal. salvage oil), V-120 (two 40-gal. new oil, 49-gal. salvage oil) and V-160 (two 40-gal. new oil, 80-gal. salvage oil) • Come with 5:1 oil pumps, 1-in. diaphragm pump with four-way valve, 1/2” x 50’ new oil reels and 1” x 25’ oil reel with quick coupler

www.forconstructionpros.com/21109156

Caterpillar C3.6 Diesel Engine The C3.6 Tier 4 Final/Stage V industrial diesel engine features 134 hp and 406 lbs.-ft. of torque at 1,500 rpm.

• Features 5% increase in power density, 12% increase in torque and 6% to 10% decrease in diesel exhaust fluid consumption compared to the C3.4 • Flexible aftertreatment solutions including engine-mounted options • Transparent, passive aftertreatment regeneration happens seamlessly to optimize overall machine uptime • Controllable turbocharging • Smaller package and compact design

www.forconstructionpros.com/21094417

Nokian Ground King Tire The Ground King tire includes Hybrilug technology, which combines features of lug and block patterns for all-terrain mobility and traction combined with a high level of comfort and precise handling response on road.

• Incorporates specially aligned pattern elements and more tread compound • High-grade, wear-resistant tread compound offers extended ground contact area to enable more operating hours even in extensive on-road use • High load-bearing capacity enables use of heavy work implements and high loads • Self-cleaning abilities

The Stage V engine range for off-road applications includes the D5, D8, D11, D13 and D16 base models offering power from 143 to 796 hp.

• Optimized engine and exhaust aftertreatment system maximize the use of passive regeneration, meaning soot accumulated in the DPF is burned off during normal machine operation • Deliver up to a 5% reduction in fuel use • Fit in the same footprint as the model they replace and a two-box aftertreatment system enables simple, flexible installation • Lengthened service intervals include doubling oil change service intervals from 500 to 1,000 hours

www.forconstructionpros.com/21159949

Vanair Start-All Lithium-Ion Jump Starters by Goodall Mfg. The Vanair Start-All Jump-Pack series can instantly jump start anything from small engines to large heavyduty 16-liter commercial-grade diesel engines, plus can double as a portable power bank.

• Four models weigh from 4.4 to 11 lbs. and produce 18,800 to 116,500 joules of starting power • Equipped with DC auxiliary, USB and 12-volt output ports • Lithium ion technology • Protect-All technology safely transfers instantaneous energy to the battery • Standard 500-lumen LED flashlight with SOS strobe functions

www.forconstructionpros.com/21070051

www.forconstructionpros.com/21085389

Western Global FUELCUBE FCP1800 Fuel Tank Yanmar 1.6L/2.1L Industrial Diesel Engines The 3TN86CHT/4TN86CHT vertical, water-cooled, three- and four-cylinder diesel engines deliver higher power density in a compact package.

• Include common rail fuel injection and cooled EGR with DOC and proprietary DPF aftertreatment to comply with EPA/ CARB Tier 4 and EU Stage V emissions regulations • Rated at 54 and 74 hp at 2,600 rpm and generate 1,918 ft.-lbs. maximum torque • Offer lower fuel consumption and noise

www.forconstructionpros.com/21259549

32 EQUIPM ENT T ODAY | March 2021 ET0321_32-36_FleetMgt_CB.indd 32

The stackable 1,800-gal. FCP1800 stationary fuel tank for on-site fuel supply and fleet refueling features double-walled, 110% containment and internal baffles.

• Integral lockable equipment cabinet ensures equipment and ports are secure and spills are contained • Secure hose access enables fueling while cabinet is locked • Four-way forklift pockets • Removable inner tank for routine cleaning, maintenance and inspection • Corner brackets allow for stacking tanks when empty

www.forconstructionpros.com/21198096

Alliance Galaxy Mighty Trac ND Skid-steer Tire The Galaxy Mighty Trac ND all-season, non-directional skid-steer tire is a versatile L-4 tire for use on loose soils, snow and pavement.

• Siped block tread design and 52:48 rubber-to-void ratio combine enhanced traction on dirt and snow with wear resistance on the road • Open, non-aligned lug pattern on the shoulders provides extra grip in soft conditions and self cleaning • Heavy stepped centerline blocks ensure smooth roading and minimize wear • Special cut-, chip- and abrasion-resistant compound and reinforced sidewall with a rim protector extend tire life

John Deere 13.6L Engine This 13.6-liter engine features an integrated high-pressure common rail fuel system and an improved combustion process that reduces DEF consumption.

• Maximum variable speed power rating of over 684 hp • Single and dual turbocharger configurations • Includes full-authority electronic controls, rear gear train, hydraulic lash adjusters and multiple aux drive connections • Capability to add more pumps with integrated power take-off • Two Integrated Emissions Control system sizes offered

www.forconstructionpros.com/12314181

www.forconstructionpros.com/21136285

www.ForConstructionPros.com

2/24/21 7:11 AM

A LONG WAY

TOGETHER

WHEREVER YOU ARE, BKT IS WITH YOU No matter how challenging your needs, BKT is with you offering a wide range of OTR tires specifically designed for the toughest operating conditions: from mining to construction sites.

Sturdy and resistant, reliable and safe, able to combine comfort and high performance.

BKT is with you, even when work gets tough.

BKT USA Inc. 202 Montrose West Ave. Suite 240 Copley, Ohio 44321 Toll free: (+1) 888-660-0662 - Office: (+1) 330-836-1090 Fax: (+1) 330-836-1091

ET0321_32-36_FleetMgt_CB.indd 33

2/24/21 7:11 AM

FL E E T M A N A G E M E N T Products

Cummins X12 Engine Petro-Canada ENVIRON MV R Hydraulic Fluid

Chevron Delo 600 ADF with OMNIMAX

ENVIRON MV R hydraulic fluid combines select, ultra-pure, severely hydrotreated base oils with a premium ashless additive system to offer enhanced protection while being OECD 301B Readily Biodegradable.

• Enhanced hydrolytic stability • Designed to provide a long service life and better seal compatibility • Able to perform over a wide operating temperature range including maintaining fluidity during prolonged lowtemperature exposure • Can enable extended drain intervals

Delo 600 ADF with OMNIMAX delivers maximum system protection to both the engine and the emissions system.

• Formulated to 0.4% sulfated ash to reduce the rate of clogging and extend DPF service life by up to 2.5 times • Enable a 3% fuel economy retention advantage over the life of the equipment • Optimal oxidation stability provides opportunity to extend engine oil drains • Enhanced valve train wear protection and piston deposit performance • Available in Delo 600 ADF 15W-40 and Delo 600 ADF 10W-30

www.forconstructionpros.com/21197927

At 2,050 lbs., the X12 engine is designed for weight-sensitive applications, enabling greater payload while improving productivity and uptime.

• Delivers the required performance and transient response while maximizing fuel economy in local duty cycles • Generates up to 500 hp and 1,700 lbs.-ft. of torque • Low-friction design offers improved fuel economy with extended maintenance intervals and high mileage to ensure maximum uptime • Compatible with a choice of fully automatic, AMT and manual transmissions

www.forconstructionpros.com/21024158

Sage Oil Vac LubeBuilder Systems LubeBuilder systems deliver complete customization for building a dedicated mobile lube truck or adding lube capabilities to an existing vehicle.

• Suited for use on crane trucks, mechanics bodies, van bodies and enclosed bodies • Created and customized to serve the particular space and fleet needs • Choose the number of tanks, tank storage capacities and placement of each tank within the truck/van bed • Fluid control panels can be mounted for operator convenience • Allow for better bed utilization with trailer-free flexibility

www.forconstructionpros.com/21002563

www.forconstructionpros.com/21127785

Kohler KDI 3404TCR Diesel Engine Graco Pulse Pro and Pulse FC Fluid Management and Control The Pulse Pro and Pulse FC fluid management and fluid control systems dispense precise volumes to create efficiencies for your operation, whether it’s a service shop, mine site, construction job or other application.

• Use to monitor how much fluid is used • Choose the amount of fluid each technician can dispense • Maintain accurate inventory • Streamline processes to improve productivity

www.forconstructionpros. com/21220298

The 74-hp KDI 3404TCR is a four-stroke in-line diesel engine with high-pressure injection (29,000 psi) and a turbocharger and up to 280.2 ft.-lbs. of torque.

• 205cc displacement • Includes a cast iron block, high-pressure common rail and wastegate turbocharger • Optimized combustion system helps achieve Tier 4 Final/EU Stage V emissions standards with no DPF required • Heavy-duty construction for demanding applications • Low noise and low vibration

www.forconstructionpros.com/21259535

FPT F34 and F36 Stage V Engines Camso TLH 592S Solid Telehandler Tire

Lumax LX-1436 Magnetic LED Light The LX-1436 Magnetic LED Light can attach securely to most hand tools including grease guns and more.

• Lights dark work areas in seconds • Weighs .25 oz.

• Long-life lithium battery provides up to 7 hours of continuous use • L736F replaceable button-cell batteries included

www.forconstructionpros.com/21111710

34 EQU IPM ENT T OD AY | March 2021 ET0321_32-36_FleetMgt_CB.indd 34

The TLH 592S solid telehandler tire provides flatfree operations, durability and a costeffective solid replacement tire option.

• Offers maximum stability, flat resistance and service life • Uses triangular aperture geometry for optimized stability, strength and comfort

www.forconstructionpros.com/21120874

The F34 3.4-liter in-line four-cylinder engine delivers 74 hp with a maximum torque of 313 ft.-lbs., while the F36 3.6liter model provides from 75 to 141 hp and generates up to 443 ft.-lbs. of torque.

• F34 uses a diesel oxidation catalyst and DPF aftertreatment system, and offers quick engine response in variable load conditions • F36 has the Hi-eSCR2 aftertreatment package, a wastegate turbocharger and improved piston design • Both models include common rail fuel injection

www.forconstructionpros.com/21069787

Donaldson P553009 Fuel Filter The high-quality, user-friendly P553009 secondary fuel filter with Synteq media technology meets rigorous standards for quality and performance.

• Designed specifically for Cummins B-series and L-series engines and must be changed according to the OE’s recommended maintenance schedule • Outer diameter of 4 in. and length of 7.76 in.

• 99% efficiency to 4 micron

www.forconstructionpros.com/21220286

www.ForConstructionPros.com

2/24/21 7:11 AM

T S

T r d •

•

• • •

•

w

e

Products FL EET MANAGEMENT

Trelleborg Earthmover Radial Series (EMR) Tires The Earthmoving Radial series (EMR) range of tires is designed for loader and dumper applications.

• Delivers premium damage protection and durability • Multi-surface tread design ensures control and grip on sand, rock, gravel or soil • Full-steel radial pneumatic carcass • Advanced compound • Equal load distribution for comfortable driving and low fuel consumption • 22 sizes from 24 to 33 in.

www.forconstructionpros.com/21063838

Briggs & Stratton Vanguard Lithium Ion Battery Pack The customized Vanguard Lithium Ion Battery, Battery Management System and battery charger work seamlessly together to deliver efficient power and performance.

• Easy installation with integrated mounting points that make it easy to stack multiple batteries for required power based on application needs • Outer metal shell provides maximum protection for enhanced durability • Modular internal components can be configured for multiple capacities and voltages

www.forconstructionpros.com/21091071

Perkins 2806J-E18TTA Dual-certified Engine

Kubota D902-T-E4 Engine The D902-T-E4 three-cylinder, 0.9-liter, turbocharged, Tier 4 Final diesel engine is designed for use in compact excavators, mini-track loaders, trenchers, welders, utility vehicles, power sources and more.

• Offers an output of 24.8 hp at 2,800 to 3,200 rpm and a maximum torque of 57.5 lbs.-ft. at 2,000 rpm without the need for aftertreatment • Mechanical fuel injection system • Turbocharger enables use in applications at high altitudes • Offers the same footprint as the naturally aspirated D902-E4 mechanical engine

BKT EARTHMAX SR 46

www.forconstructionpros.com/21028914

www.forconstructionpros.com/21069771

At 33.00 R51, the EARTHMAX SR 46 is particularly suited for transporting heavy loads, including on rigid dump trucks working in hard and rocky environments.

• Features a diameter of more than 3 meters (118 in.), measures 975 cm wide and weighs not less than 2,400 kg (5,291 lbs.)

• Special tread design with block lug pattern and circumferential grooves yields optimal cornering performance and reduced wear and tear

Titan STL3 Radial OTR Tire

This 18-liter series twin turbo Tier 4 Final/Stage V dual-certified engine can be installed in products used in North America and the EU without modification and with flexible installation options.

• Series twin turbos help to achieve 800 hp at 1,800 rpm and 2,736 lbs.-ft. of torque (755-hp rating available) • Mechanical electronic unit • Maintenance-free diesel oxidation catalyst aftertreatment requires no coolant, fuel or electrical connections for simplified installation

The STL3 Radial OTR tire features an E-3/L-3 non-directional tread pattern and is available in cut- and wear-resistant compounds.

• Center riding rib for smooth ride and long, even wear in earthmover or loader applications • Full-width shoulder lug provides optimal traction and lateral stability • Additional compounds available upon request

www.forconstructionpros.com/21069814

www.forconstructionpros.com/21111167

Hot Shot’s Secret 10W-30 Green Diamond Fleet Diesel Engine Oil The 10W-30 blend of Green Diamond Fleet Full Synthetic Group III/Group IV engine oil is formulated for diesel-powered vehicles that experience extreme temperatures, heavy loads, stopand-go operations or high airborne particulates.

• Manufactured from Group III and Group IV base oils and infused with FR3 Nano Technology and a fully formulated CK-4 additive package • Effectively cleans, lubricates and maintains engines and turbos • Provides improved cold starting and reduced soot, noise and vibration • Also offers enhanced oxidation and thermal stability and increased film strength

TRI 2

Versatile professional contracting tire for year-round use

H A K K A P E L I I T TA T R I Extend the allseason capabilities of your machinery

GROUND KING

Combining all-terrain mobility with on-road performance

www.forconstructionpros.com/21198081

ET0321_32-36_FleetMgt_CB.indd 35

800.565.2525

nokianheavytyres.com

www.ForConstructionPros.com

March 2021 | EQ U I P MEN T TO D AY

35 2/24/21 7:11 AM

FL E E T M A N A G E M E N T Products Phillips 66 Guardol FE 10W-30 Heavy-duty Engine Oil Guardol FE with Liquid Titanium is formulated with a blend of synthetic and high-quality Group II base stocks and a proprietary low-SAPS additive system to provide engine protection in latemodel diesel engines.

• Fortified with Liquid Titanium protection additive for enhanced oxidation resistance and protection against wear and increased engine protection • Warranted for use in 2010 and newer Detroit Diesel engines and 2014 and newer Cummins, PACCAR, Navistar and Volvo/Mack engines

Stellar TM28 Tire Manipulator The TM28 tire manipulator is available in a long or short arm version offering a rated capacity of 28,000 lbs., suited to handle large construction and mine equipment tires.

• Utilizes a forklift or loader as a tire handler • Features 110° body rotation and 360° continuous rotating pads for full operator control • Optional side shift feature allows an operator to easily make small adjustments for better control over the tire • Features include an accessory mounting rail and fall back protection with integral lock ring catcher

www.forconstructionpros.com/21259541

www.forconstructionpros.com/21062174

Summit Supply Duraline Rubber Track Pads The Duraline rubber track pads are available in bolt-on, clip-on, roadliner and bolt hook options.

• Heavy-duty hard rubber compound bonded to a steel core • High tear and tensile strength • Available in 200 to 900 mm • Designed for easy attachment to grouser plate or grouser shoe depending on model

www.forconstructionpros.com/21124644

Shell Rotella T6 Full Synthetic 0W-40 Engine Oil

Rotella T6 Full Synthetic 0W-40 API CK-4 heavy-duty engine oil is suited for on- and off-road diesel vehicles and equipment operating in cold climates.

• Formulated with Triple Protection Plus technology • Protects against wear, deposits and oil breakdown • Advanced multi-functional dispersant additives and synthetic base oils provide enhanced protection against soot, dirt and other contaminants • Optimal pumpability at low operating temperatures • Low ash formulation to protect exhaust catalysts and particulate filters

www.forconstructionpros.com/21098105

Femco Non-Drip System The Non-Drip system is a series of drain plugs and clickers specifically created to rapidly drain and refill oil from vehicles or machines without leaving any residue.

• Allows use of a single draining system for both draining and refilling • Robust brass construction suitable for changing oils and fluids at high temperatures • Single plug available in numerous sizes and designed to be used with the non-drip clicker • Decreased distance between the valve opening of the plug and nozzle opening of the clicker helps ensure no residue is left behind

www.forconstructionpros.com/21197921

Fumoto SX Industrial Series Oil Valves The SX Industrial Series line of oil valves is designed to improve ease of oil changes on tough machines including big rigs and vocational trucks.

• For industrial applications starting at 18mm thread sizes • 360° adjustability enables valve and lever to be placed as needed • Increased ball valve size for faster flow rate • Lighter, stronger SX bolt made of duralumin alloy

www.forconstructionpros.com/21037345

Induction Innovations Inductor ALFe Induction Heaters ALFe 3.5 and ALFe 5.0 induction heaters are capable of heating aluminum and steel to help release seized parts and panel bond adhesives.

• 230V/16A/P1 (ALFe 3.5) or 208V/20A/ P3 (ALFe 5.0) • ALFe 3.5 offers a 9-minute duty cycle, while the ALFe 5.0 has a 30-minute duty cycle • LED light indicator • Safety shutoff

www.forconstructionpros.com/21108959

Deutz TCD 2.2 L3 Engine The TCD 2.2 L3 three-cylinder engine features a DVERT oxidation catalyst (DOC) that enables maintenance-free, Tier 4 operation under all applications and ambient conditions.

• Features a common rail fuel injection system and cooled, external exhaust gas recirculation with or without turbocharging and charge air cooling • Generates 134-cu.-in. displacement and 75 hp at 2,600 rpm and maximum torque of 207 lbs.-ft. at 1,600 rpm • Extremely compact design for ease of installation • Modular exhaust aftertreatment system (EAT) configuration

www.forconstructionpros.com/21115904

36 EQUIPM ENT T OD AY | March 2021 ET0321_32-36_FleetMgt_CB.indd 36

www.ForConstructionPros.com

2/24/21 7:11 AM

LIFT EQUIPMENT Products JLG 600 Series Hi-Capacity Boom Lifts

Manitou ATJ 60 Diesel Articulated Boom Lift

The 60-ft. 600S and 600AJ and the 66-ft. 660SJ come standard with a 660-lb. unrestricted capacity zone and 750- and 1,000-lb. restricted capacity zones.

• Rated for three occupants in all three zones • Heavier in weight than their standard model counterparts while retaining the same footprint • Load sensing system limits operation when platform is overloaded, and does not require placing a load in the platform for recalibration • LED display adjusts brightness based on ambient light, ensuring maximum visibility of the platform and ground consoles during operation

The ATJ 60 with jib provides a platform height of up to 59 ft. 11 in., a horizontal outreach of 39 ft. 4 in. and a platform capacity of 500 lbs. unrestricted.

• 26-ft. 3-in. up-and-over reach • 360° turret rotation, 90° right/left platform rotation and 70° / -70° vertical jib rotation • 6’ 11” x 2’ 7” platform with swinging gate • Offers three steering modes, four simultaneous movements and constant rotation control • Features a 42.9-hp Kubota diesel engine, four-wheel drive, front oscillating axle with limited-slip differential lock on the rear axle and a gradeability of 40%

www.forconstructionpros.com/21122370

www.forconstructionpros.com/21091679

Snorkel 2100SJ Telescopic Boom Lift The 2100SJ telescopic boom reaches a 216-ft. working height, has a 100-ft. outreach and has a 660-lb. unrestricted platform capacity.

• Comes with an 8’ x 3’ tri-entry platform with 150° rotation and a 30-ft. jib boom with a working arc of -55° to +73° • Static axle transformation delivers smooth operation and minimizes tire scrub risk • Five steering modes including lateral steer with the wheels in a 90° position • Removable RF lower controls enable wireless operation for loading, and secondary upper controls allow operator to face working area for platform positioning • 8-ft. 2-in. stowed transport width

www.forconstructionpros.com/21118133

Pettibone Mobile Elevating Work Platforms This line of ANSI A92.20-compliant mobile elevating work platforms includes 13 scissor lift models with work heights ranging from 18.4 to 46 ft. for indoor or outdoor applications.

• Available in electric or hydraulic drive configurations • Platform capacities range from 510 to a maximum of 990 lbs.

• Universal drive control box with motion alarm and LED screen • 2- or 3-ft. platform extensions with smooth foot pedal control • Tilt sensor automatically stops operation if the tilt level exceeds 3° for front/back incline or decline or 1.5° for left to right tilting

www.forconstructionpros.com/21105917

Skyjack SJ9263 RT Full-size Scissor Lift

The HS4390 E and HS5390 E PULSEO fully electric mobile elevating work platforms can easily conquer obstacles and climb slopes up to 45%.

• Work platform reaches 19 ft. with both extensions deployed and can lift up to 1,650 lbs. of load and up to four workers • Include an oscillating axle, four-wheel-drive axles and a manual differential wheel lock • Can be deployed on slopes up to 5° with outriggers • Include the Activ’Lighting System, Activ’Shield Bar System and Activ’Energy Management System • 48V battery pack with three charging solutions available

The ANSI 92.20-compliant SJ9263 RT has a working height of 69 ft. and a platform capacity of 1,200 lbs.

• Standard platform dimensions of 6 ft.

3 in. wide and 14 ft. 2 in. long or up to 23 ft. 4 in. with dual extension option that accommodates four workers • Features the AXLDRIVE axle-based fourwheel-drive system and a gradeability of 30% • Drive speeds of 3 mph stowed and .6 mph raised (33 ft.)

• Auto leveling outriggers • 24.8-hp Kubota D1305 Tier 4 Final diesel engine or optional 31-hp Kubota WG972 dual-fuel engine

www.forconstructionpros.com/21124924

OZ Lifting Products Wireless Builder’s Hoist This 600-lb.-capacity, 115-volt single-phase powered wireless builder’s (wire rope) hoist offers lifting speeds of 52 fpm and a 90-ft. height of lift as standard with custom options available.

• 360° hook allows the load to rotate and helps keep the wire rope spooled correctly on the drum • 15-minute continuous use means hoist can be utilized in permanent and short-term applications • Features remote control operation, upper and lower limit switches and emergency up/down control switch on the side of the hoist • Easily portable at 49 lbs.

www.forconstructionpros.com/21220407

www.forconstructionpros.com/21202288

MEC 34-J Telescopic Boom The diesel-powered 34-J offers the benefits of a selfpropelled unit plus a 40-ft. working height with a standard 5-ft. jib for a 135° range of motion.

• Compact and weighs just 8,000 lbs. yet provides construction-grade durability • Can be towed with a full-size truck or three units could fit on a flatbed truck • Standard 72-in. platform includes a three-sided entry with a swing gate • Ergonomic platform controls available with optional Proactive Platform Safety System and are designed without a foot switch, giving the operator increased visibility and mobility in the platform • Includes four-wheel drive and positive traction with an oscillating front axle for roughterrain maneuverability

www.forconstructionpros.com/21173979

www.ForConstructionPros.com

ET0321_37-40_LiftEquip_CB.indd 37

Haulotte PULSEO MEWP Lineup

March 2021 | EQ U I P MEN T TO D AY

37 2/24/21 7:16 AM

LIFT EQUIPMENT Products Hy-Brid Lifts Pro Series PS-1930 Scissor Lift The PS-1930 has a platform height of 19 ft. and a working height of 25 ft., and includes a 60” x 24” platform with a 30-in. slide-out platform extension.

• Includes a 650-lb. lift capacity, low step-in heights and a compact, lightweight design • Fits through standard doors without fold-down rails and in standard elevators • Rated for indoor and outdoor use with upper controls to switch between indoor and outdoor modes • Outdoor option rated for use at a maximum wind speed of 28 mph • LeakGuard fluid containment system

www.forconstructionpros.com/21111086

LGMG T65J Telescopic Boom

Falcon Sigma 13- to 27-meter Lifts

The 25,132-lb. T65J is ANSI A92.20 compliant and has a platform working height of 65 ft. when fully extended and a horizontal outreach of over 56 ft. with a below grade reach of almost 9 ft.

• 71” x 30” platform can hold up to 551 lbs. and rotates up to 360° • Pressure sensors ensure precise weights and increased operator safety • Advanced control system provides machine status updates, diagnostic capabilities and the ability to perform adjustments online and remotely • Offers a gradeability (4WD) of 45% and comes with tilt-slope sensors and alarm • Powered by a Deutz D2.9L4 engine

This product range includes five track-mounted spider lift models with working heights of 13 to 27 meters (roughly 43 to 89 ft.).

• 440-lb. basket capacity • Offered as hybrid or all-electric lithium battery-powered versions • Can be used indoors or out, fit through a single-person door and travel up and down standard size elevators • Can be transported with a pickup truck and trailer • Telematics system allows remote diagnostics and troubleshooting

www.forconstructionpros.com/21125086

www.forconstructionpros.com/21244762

Caterpillar TH514D Telehandler The TH514D has a rated load capacity of 11,021 lbs. and a maximum lift height of 45.5 ft.

• 100-hp C3.4B Tier 4 Final diesel engine and 4F/3R powershift transmission • Closed-center, load-sensing hydraulic system with variable-displacement axial piston pump and flow-sharing valves • Four-wheel-drive system uses heavy-duty axles with planetary reduction hubs, front limited-slip differential and dual-axle braking • Ride control system dampens boom movement during travel and a boom-float system allows the boom to automatically follow terrain contours • Single multi-function joystick

www.forconstructionpros.com/12318344

Bobcat V923 VersaHandler The 18,158-lb. V923 VersaHandler features a 130-hp Bobcat turbocharged, non-DPF diesel engine and heavy-duty drivetrain.

• Maximum rated lift capacity of 9,041 lbs., maximum lift height of 277 in. and maximum reach of 162.3 in.

• Low-profile extendable boom with Z-bar linkage • Heavy-duty hydrostatic transmission enables up to a 25-mph stepless driving experience • Includes all-wheel, front-wheel and crab steering modes, as well as speed management and inching control travel modes and a two-speed travel option

www.forconstructionpros.com/21138049

Merlo P27.6PLUS Telehandler The P27.6PLUS has a width of 6 ft. and a height of 6 ft. 4 in., yet offers a large cab and can handle a maximum load capacity of 6,000 lbs. with a lifting height of 19 ft. 4 in.

• Lower center of gravity ensures increased machine stability, traction and nimbleness and allows it to be approved for towing trailers • Frame-mounted, vibration-dampening silent blocks provide comfortable seating, and controls are ergonomically placed within the 3-ft. 3-in. cab • Standard hydrostatic transmission enables a 25-mph maximum speed and fourwheel drive with three steering modes • 75-hp Kohler or Kubota four-cylinder engine mounted on the frame side for maintenance accessibility

www.forconstructionpros.com/21175024

38 EQUIPM ENT T OD AY | March 2021 ET0321_37-40_LiftEquip_CB.indd 38

Genie S-60 J Telescopic Boom Lift The S-60 J has a compact chassis design and 16,650-lb. operating weight yet delivers an unrestricted platform capacity of 660 lbs. with standard 6-ft. jib, a platform height of 60 ft. 10 in. and horizontal reach of 40 ft. 6 in.

• 1 ft. 10 in. of ground clearance • 24-hp Kubota D1105 Tier 4 Finalcompliant diesel engine • Four-wheel drive with active oscillating axles and rough-terrain foam-filled tires • Digital load sense technology for accurate load weighing and zero-load field calibration • Standard Lift Guard Contact Alarm system

www.forconstructionpros.com/21259648

www.ForConstructionPros.com

2/24/21 7:16 AM

100% PRODUCTIVIT Y. 0% EVERYTHING ELSE. I N T R O D U C I N G

T H E

D A V I N C I™ I™ A L L - E L E C T R I C S C I S S O R A masterpiece of simplicity built to deliver the productivity you need – and nothing more. Absolutely zero hydraulics with a best-in-class 600-lb capacity that lifts up to 19-ft indoors and out, all powered by a single lithium-ion battery expected to last up to 10-years. Zero hydraulic leaks.

Zero battery replacements. Zero wasted time.

S E E U P T I M E M A D E S I M P L E AT ALLELECTRICSCISSOR.COM

ET0321_37-40_LiftEquip_CB.indd 39

2/24/21 7:16 AM

L I F T E QU IP M E N T Products ReachMaster Bluelift B85 Compact Lift

Sinoboom Mobile Elevating Work Platforms

The B85 features an electrohydraulic system that gives the user the ability to operate two independent functions at the same time.

• Offers both lithium batteries and a combustion engine on board • Automatic outrigger setting and leveling • Provides ability to set up on uneven surfaces • Includes CANbus computerized controls and a wireless remote

This line of mobile elevating work platforms includes straight and articulating boom lifts, scissor lifts and a vertical mast lift.

• GTBZ28J straight boom has a 97.4-ft. maximum operating height, 65.6-ft. horizontal extension and proportional operation • GTZZ16EJ articulating boom offers a 51.5-ft. maximum working height, 30.5-ft. horizontal extension and a 6.2-ft. narrow body with almost zero tail sweep • GTJZ0608M and GTJZ0407SE scissor lifts feature 507and 529-lb. platform capacities and the GTJZ1414E scissor lift has a 51.8-ft. working height • GTTZ10EJ vertical mast lift has a working height of 33.8 ft.

www.forconstructionpros.com/12144704

www.forconstructionpros.com/21126030

Magni RTH Rotating Telescopic Handlers

Gehl RS4-14 Super-compact Telehandler At just under 60 in. wide and 75 in. tall, the RS4-14 boasts a full-size operator cab and a maximum lift capacity of 4,400 lbs., lift height of 14 ft. 3 in. and outreach of 8 ft. 8 in.

• Four-wheel drive with three steering modes and a 10-ft. 1-in. turning radius for work on uneven terrain and in confined spaces • Two-speed hydrostatic transmission with gear change on the GEN:3 multifunction single joystick • GEN:3 joystick allows operator to control all hydraulic and directional functions with one hand • Universal skid-steer quick-attach system allows use of a range of attachments

www.forconstructionpros.com/21045746

Xtreme C-class Rough-terrain Telehandlers

APPLIED MACHINERY SALES

SALES & RENTALS AMS-MERLO.COM INFO@APPLIEDMACH.COM

803-327-4949

All C-class electric-over-hydraulic models have a lift capacity up to 15,000 lbs., 360° visibility from the cab and frame leveling up to 11°.

• 120-hp Cummins 3.8L Tier 4 Final engine • Modular cab design can switch from open to enclosed with an optional kit • Available with foam-filled or solid tires and open, enclosed or enclosed cab with heat and air conditioning • XR1347-C and XR 1547-C offer a 12-ft. turning radius and feature a 47-ft. maximum lift height and 31-ft. 6-in. maximum forward reach • XR1555-C provides a 55-ft. maximum lift height and 38-ft. 5-in. maximum reach, and includes a 100-gal. fuel tank

www.forconstructionpros.com/21113854

40 EQUIPM ENT T OD AY | March 2021 ET0321_37-40_LiftEquip_CB.indd 40

The RTH rotating telehandlers include 14 models with lift heights from 57 to 150 ft., forward reach from 47 to 110 ft. and lifting capacities from 11,000 to 17,600 lbs.

• RFID-based attachment recognition enables machines to select the correct load chart for a range of attachments • Multiple sensors enable load charts from 0% to 100% • Two-wheel, four-wheel and crab steering modes • Design eliminates a dashboard, allowing for floor to ceiling glass at the front of the cab • Combi-Touch System provides the choice of a full-color, intuitive touch display panel interface or control dial

www.forconstructionpros.com/21046991

Wacker Neuson TH627 Groundengaging Telehandler

JCB 504-13 Loadall Subcompact Telescopic Handler

The TH627 performs lift and place operations plus is designed to function like a wheel loader with ground-engaging capabilities.

• Features an 18-ft. 7-in. lift height and 5,500-lb. lifting capacity • Includes bucket and stacking/fork modes • Universal attachment plate allows connection of skid-steer attachments • Load management system alerts operator if load exceeds the weight limit at any given point during the lift cycle • 74-hp Kohler Tier 4 Final engine requires no diesel particulate filter or regeneration

The 504-13 Loadall has a U-pressed steel boom with fewer welds and stress points, enabling a 4,000-lb. lift capacity and maximum lift height of 13 ft. 3 in.

• Includes a 39-hp Perkins Tier 4 Finalcompliant diesel engine and two-speed hydrostatic transmission • Features single-lever electro servo controls, all-steel bodywork, permanent four-wheel steering and low boom profile • Spacious cab with a wide access door, tinted glass all round and laminated windshield and roof • Compact tool carrier or skid-steer coupler

www.forconstructionpros.com/20868021

www.forconstructionpros.com/21064214

UP Equipment Hoeflon Compact Tracked Cranes The C1, C4, C6 and C10 compact crawler mini cranes are offered in combustion and electric models.

• Lift capacities range up to 8,810 lbs. to a maximum height of 72 ft.

• Include two telescopic sections and 210° of articulation with a hydraulic jib for up-and-over capability • Searcher hook, hydraulic winch or vacuum lifting device can be used in articulated mode and the straight mast with jib removed • Infinite swing-out and telescopic outriggers • Come with a wireless remote control with LCD display

www.forconstructionpros.com/20994894

www.ForConstructionPros.com

2/24/21 7:17 AM

ROAD BUILDING Products Volvo DD128C Asphalt Compactor Powered by a 148-hp Volvo D4 Tier 4 Final engine, the DD128C delivers fast rolling speeds while maintaining proper compaction spacing with the Impact Spacing Meter.

• Includes a 79-in.-wide front drum with chamfer and radii drum edges and a 55-in.-diameter rear drum and auto-reversing eccentrics • Automatic drum wetting systems on both drums • Amplitude range of 0.003 to 0.03 in.

• Standard Compact Assist Intelligent Compaction System

www.forconstructionpros.com/21118954

GOMACO Xtreme GT-3600 Curb and Gutter Machine The Xtreme GT-3600 with the Xtreme package means tight radius paving is even easier and more efficient.

• Each track includes rotary-sensored slew drives, sensored All-Track Steering and All-Track Positioning and smart hydraulic cylinders • Smart cylinders allow the G+ control system to know the exact track position to make steering adjustments as needed • Xtreme Radius program allows for tight radii on stringline • G+ control system easily interfaces with any of the major 3D guidance systems • Smart hydraulic cylinder utilized for intelligent offset when telescoping and side shifting the mold mounting system

www.forconstructionpros.com/21035943

Topcon Thermal Mapping System for Asphalt Paving The Thermal Mapper for asphalt paving is designed to monitor temperature segregation and easily provide accurate compliance reporting, all with real-time kinematic (RTK) positioning accuracy.

• Provides a visualization to operators in real time of whether the mix falls within a pre-defined temperature range • Quickly tells operators if mix is stable or if moderate or severe temperature variation is occurring • Creates data reporting files to download for applications such as DOT compliance via an interactive Pavelink module

Caterpillar F-Series Pavers The AP500F and AP600F have wheeled undercarriages while the AP555F, AP655F and AP1055F come with the Mobil-Trac undercarriage.

• SE-Series screed platform with vibratory only or vibratory and tamper bars • Some models offer screed packages with the capability of paving up to 33 ft. wide • ACERT Tier 4 Final engine includes standard Eco-mode and automatic engine speed control • Integrated generator brings screed plates to proper temperature in about 15 minutes • Screed extensions with two-speed proportional control for enhanced responsiveness near obstacles and more precise control

www.forconstructionpros.com/21121074

LeeBoy 8530 Asphalt Paver The 8530 asphalt paver comes with a 125-hp turbocharged engine and enhanced cooling systems.

• Features independent hopper wings, reversible augers and conveyors, material cut-offs that automatically close in reverse and quick-change auger assemblies • Legend HD PRO Screed includes heavyduty flight screws, a heavy-duty crown and valley mechanism, angle-of-attack adjuster with vertical height adjustment, sloping screed extensions and pre-strikeoff adjustment • Dual operator control platforms accompanied by multi-position, pivoting seats

www.forconstructionpros.com/21115855

Leica MC1 for Stringless Paving The MC1 asphalt paving solution enables operators to precisely place cementtreated base course or start paving directly without waiting for manual stakeouts.

• Operator can change height offset directly on the run screen • Fully compatible with iCON site and ConX for seamless data sharing, file transfer, as-built documentation, track, view and sync functions • Uncluttered and user-friendly interface with the latest updates included • Terrain models for milling and asphalt pavers • Smartspare TPS feature for the handling of spare TPS tracking and lock to target

www.forconstructionpros.com/21120984

www.forconstructionpros.com/21037730

Power Curbers 5700-D Slipform Curb Machine

Miller Formless M-8100 Slipforming System This versatile slipform paving machine can pour multiple profiles from curb and gutter to 16-ft. paving widths including barrier wall, parapet and ditches.

• 173-hp Tier 4 Final diesel engine • Latest generation MFS Control System includes sensors and handheld remote and is 3D ready • Four tracks with independent steering • Includes eight-spool vibrator control, a heavy-duty modular auger, 36-in. elevation tubes, high-volume wash down system and triple grouser track pads • Right- or left-hand configuration

www.forconstructionpros.com/10086603

Trimble Roadworks 2D Paving Control Platform The Trimble Roadworks 2D Paving Control Platform is an automatic screed control system with intuitive software built on the Android operating system.

• Can use various 2D references to pave with a fixed thickness • Utilizes same interface as the Earthworks Grade Control Platform and many of the same sensors as the PCS400 2D Paving Control System while running on a 7-in.

TD510 touchscreen display • Two external keypads allow sensor values and input data to be changed in the field • Can be mounted on a variety of new and existing asphalt paving machines, regardless of manufacturer

www.forconstructionpros.com/21132376

www.ForConstructionPros.com

ET0321_41-43_RoadBuilding_CB.indd 41

The 5700-D features the SlipSmart Control System, simple and accurate controls that come ready to interface with Topcon, Leica and Trimble 3D stringless systems.

• “All up” jog switch raises or lowers all crawler posts simultaneously • Vibrator master scaling knob allows operator to increase or decrease vibration across all vibrators while individual vibrator adjustments remain relative to each other • Features improved cross-slope control, autocalibration for the radius steer sensor, fine scaling of speed pots, an easy-pivot conveyor and more

www.forconstructionpros.com/21096387

Minnich A-4SCW Dowel Pin Drill with i-QAN System This A-4SCW on-slab self-propelled wireless drill features the I-QAN remote communication system, which enables drill monitoring, diagnostics and remote access to field support via an iPad tablet, iPhone or Android device.

• Offers a service weight of 3,260 lbs. and a maximum hole depth of 18 in.

• Drills automatically retract and shut off when the hole depth has been reached • Remote control with joystick controls speed, steering, direction of travel and a dust collection on/off switch

www.forconstructionpros.com/21121079

March 2021 | EQ U I P MEN T TO D AY 41

2/24/21 7:22 AM

ROAD BUILDING Products

BOMAG BW 120 SLC-5 Combination Roller The BW 120 SLC-5 combination roller features a steel front vibratory drum joined with four smooth rear rubber tires to elevate compaction results on a range of applications.

• 24.8-hp Kubota diesel engine meets Tier 4 Final standards without a diesel particulate filter • 47.2-in-wide front steel drum plus 4,320-vpm vibration frequency and amplitude of 0.020 in.

• Ergonomic control panel layout with clear symbols and one switch/one function operation • Material manipulation provided by the rear tires delivers a better finish for joint construction

www.forconstructionpros.com/21121868

Case E Series Compact Vibratory Rollers Seven compact vibratory rollers range from 33.5 to 43.9 hp and from 4,920 to 9,520 lbs. and come in double-drum and combination configurations with drum widths from 39 to 54 in.

• Redesigned operator interface includes an electronic travel lever and rpm settings, drive settings, sprinkler system controls and more at the operator’s fingertips • Operation mode selector to select from loading, working and transport modes • Soft drive setting provides a smooth ride during asphalt compaction, while the optional hard drive setting enables swift turns • Deliver high centrifugal forces and frequencies at lower rpms with selectable dual vibration frequencies

www.forconstructionpros.com/21120047

Mauldin 6000 Asphalt Roller The 6000 asphalt roller features a 6,000-lb. operating weight and a 24-hp Kubota engine.

• Adjustable 2-in. drum offset • Large-diameter drum • 54-gal. pressurized water system • Designed for operator comfort

www.forconstructionpros.com/21206878

E-Z Drill Model 210B SRA Slab Rider

Wirtgen W 220 Fi and W 250 Fi Large Milling Machines The 801-hp W 220 Fi and 1,010-hp W 250 Fi milling machines have a maximum milling depth of 14 in.

• Various drive concepts available to ensure maximum, optimal milling performance • Mill Assist standard assistance system automatically controls two-speed Dual Shift powershift transmission when in automatic mode • Milling drum speeds can be increased or decreased to match the application • Wirtgen Performance Tracker (WPT) calculates precise surface milling performance, milling volume and consumption values

www.forconstructionpros.com/21108870

Carlson CP60 and CP65 Wheeled Asphalt Pavers The CP60 and CP65 wheeled asphalt pavers deliver laydown rates of up to 250 tph.

• Available Deutz Tier 4 high-torque engine • Optimal maneuverability with transport speeds of up to 10 mph • EZC34 electrically heated screed offers a standard paving width of 6 to 11 ft. and provides optimal ride uniformity, mat quality and pre-compaction • Available in vibratory and tamper bar models

www.forconstructionpros.com/21047851

42 EQU IPM ENT T ODAY | March 2021 ET0321_41-43_RoadBuilding_CB.indd 42

The 1.2-ton RD12 series vibratory rollers feature a 34.5-in. drum with front drum dynamic centrifugal force of 3,400 lbs.

• RD12A powered by a 20.8-hp Honda gasoline engine and RD12K equipped with a 21.6-hp Kubota diesel engine • Fully recessed hydraulic motors provide optimal curb and side clearance • Tapered frame and hood design provides for visibility to the drum edges and more comfortable operation • Ergonomically designed operator’s platform with water and vibration functions integrated into the joystick control and conveniently located fuel and water gauges

www.forconstructionpros.com/21047045

Roadtec SB-3000 Material Transfer Vehicle The SB-3000 Shuttle Buggy Material Transfer Vehicle offers 25 tons of storage in the main hopper and can hold more than 30 tons of material.

• Main operator positioned closer to paving action while maintaining optimal sight lines, with the ground operator protected inside the structure of the machine • 310-hp Cummins QSB6.7 Stage 5 engine with ground-level access • Four-wheel steer

www.forconstructionpros.com/21108856

The 210B SRA slab rider is designed for concrete drilling projects needing greater accuracy and no disturbance to the subgrade.

• Users can stitch or drill horizontally, vertically or at an angle • Diameters from 5/8 to 2 1/2 in. and a depth of 18 in.

• Auto-alignment feature tracks hole placement for quick and easy repositioning • Suited for airport projects, lane additions and full-depth road repair

www.forconstructionpros.com/10078298

Wacker Neuson RD12 Series Tandem Rollers

Dynapac CO5200 VI Oscillation Roller Terex Bid-Well 3600 RC Roller Paver The remote control system on the 3600 RC Roller Paver provides enhanced communication between the operator, team members and concrete placer.

• Paves bridge decks, flatwork and roads with minimal setup time and increased flexibility • RC unit can control machine’s engine, power legs, machine and carriage travel speed functions and most accessories • Operator’s console still functional as needed

The CO5200 Generation VI doubledrum roller with oscillation allows the operator to select the system that is most suitable for the application.

• 25,798-lb. oscillation roller • Drum shell fabricated from Hardox 450 abrasion-resistant steel • Cummins QSF3.8 IV/T4F engine • Balanced operating mass for the front and rear modules helps reduce roller marks and deliver a consistently compacted surface with every pass • Can reach ground speeds of up to 7.5 mph

www.forconstructionpros.com/21067983

www.forconstructionpros.com/21120765

www.ForConstructionPros.com

2/24/21 7:22 AM

New

www.gomaco.com x info@gomaco.com Dedicated to Concrete – Dedicated to You. GOMACO offers the full range of concrete slipform pavers, curb and gutter machines, placer/spreaders, texture/cure machines and bridge/canal finishing equipment. GOMACO equipment features our exclusive and proprietary G+® control system, created in-house by our software engineers from the wants and needs of contractors paving in the field. We’ll show you the new Navigator controller with a 10-inch touchscreen that allows ground personnel to simply control and view all attachments from one location. We are also introducing our new high-production system for the C-450 cylinder finisher for bridge decks and flat slabs. At the heart of GOMACO equipment is our passion for concrete and our commitment to our customers.

We look forward to visiting with you about your upcoming paving projects and your concrete paving equipment needs.

CONCRETE STREETS AND HIGHWAYS x AIRPORT RUNWAYS x CURB AND GUTTER x SIDEWALKS RECREATIONAL TRAILS x SAFETY BARRIER x BRIDGE PARAPET x BRIDGE DECKS x IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA x 712-364-3347

ET0321_41-43_RoadBuilding_CB.indd 43

2/24/21 7:22 AM

WORKSITE EQUIPMENT Products

Soil Connect Marketplace Wacker Neuson G70 Generator The compact, sound-attenuated G70 mobile generator provides single- and three-phase power for applications where quiet power is needed.

• Features a 104-hp Kohler KDI3404 Tier 4 Final engine, variable-speed fan, Mecc Alte alternator and Deep Sea controller • Produces standby output of 63 kW/79 kVA and prime output of 58 kW/72 kVA • Separate excitation winding and Automatic Voltage Regulation (AVR) enhance motor starting and the ability to run non-linear loads • Optional Level Load Logic (L3) automatically activates when it senses a less than 30% load and low coolant temperature

www.forconstructionpros.com/21050268

Kubota GL14000 LowboyPro Generator The GL14000 is a Tier 4-certified, 14-kVA single-phase generator powered

by Kubota’s D902 diesel engine and offering frequencies that can switch between 50 and 60 Hz. • Triple-sealed, corrosion-resistant alternator optimized to generate more magnetic force with fewer turns • Large-capacity built-in muffler and largecapacity radiator reduce noise, enabling noise levels as low as 65 dB • Fully enclosed, compact and houses the receptacle and terminal in one package • Standard overcurrent and engine shutoff protective devices

Soil Connect combines technology and social networking capabilities to provide a fast, cost-effective way for construction professionals to transport and acquire soil, aggregates and other building materials.

• Mobile and web-based app fully digitizes and streamlines the soil transfer process • Users can post listings and requests for soil, aggregates and other materials, and can upload supplier-certified analysis and geotechnical reports • Enables soil providers and recipients to transact at shorter distances between jobsites • eTickets can be generated to enable easy capture, tracking and sharing of details of hauling materials

www.forconstructionpros.com/21271128

Kohler KD Series Industrial Generators The KD Series large diesel industrial generators are powered by Kohler G-Drive engines and deliver between 709- and 3,608-kWm standby power at 50 Hz and 891- to 4,250-kWm standby power at 60 Hz. • Highly customizable to match end user’s specific requirements • Multiple options available • Designed for high ambient temperature conditions • High technology regulation and monitoring control systems on each component

www.forconstructionpros.com/12309963

www.forconstructionpros.com/12293106

Doosan XP185WDO Small Air Compressor The XP185WDO high-pressure small air compressor produces 185 cfm and 125 psi and can simultaneously power both air and electrical tools with the optional 4-kW generator.

• Two 120-volt duplex outlets • Onboard toolbox for storage • 74-hp Doosan D24 Tier 4 Final engine with diesel oxidation catalyst • 10-hour runtime at 100% load • Limited ambient temperature of 125° F

www.forconstructionpros.com/21069788

Mi-T-M Rotary Screw Single-stage Air Compressor The AR1-PK37-M rotary screw, single-stage, gasoline air compressor produces 115 cfm at 100 psi, and the 10 1/2-gal. fuel tank provides the extended run time needed on many jobsites.

• Compressor pump includes an integrated air/oil separator, integrated thermostatic bypass valve, banded four V-belt drive system, easy to read oil level indicator and high oil temperature shutdown • Electric start gasoline engine with low oil level shutdown • Powder-coated steel frame with 1 1/4-in. roll cage, handle, four-point lifting hook, winch point and tie-down anchors • 15-in. pneumatic tires

www.forconstructionpros.com/12182624

Multiquip LD6 Hydrostatic Ride-on Trowel The 6-ft. model LD6 ride-on power trowel features a fully hydrostatic drive system and utilizes proven design concepts taken from larger ride-on models.

• Standard 24-hp Briggs & Stratton V-twin engine direct coupled to a servo-controlled hydraulic pump and hightorque drive motors • Available accessories include a six LED light kit for illumination, retardant spray system, arm rests and an edging kit that enables finishing closely against walls • Each accessory kit designed for quick field installation

Allmand Maxi-Air 100, 375-DP and 400 Air Compressors The MA100, MA375-DP and MA400 portable air compressors feature a heavyduty, oversized rotary screw airend designed to run at lower rpms for longer life and improved fuel efficiency.

• Deliver powerful airflow from 100 to 400 cfm in all climate conditions • MA375-DP and MA400 designed to meet high-pressure application demands with the MA375-DP featuring a flexible dual pressure design • Tier 4 Final engines • Developed for ease of use and easy starting

www.forconstructionpros.com/21047378

Atlas Copco QAS 150 and QAS 200 Generators The QAS 150 offers a power rating of 150 kVA/120 kW of prime power and the QAS 200 delivers 200 kVA/160 kW. • Dual frequency capable and powered by a John Deere 6068 Tier 4 Final engine • AREP alternator excitation system offers quick and easy motor starting capabilities • 335-gal. fuel tank allows for extended run times at 100% load • Standard variable speed fan, voltage switch for switching to a new voltage within seconds and environmentallyfriendly spillage-free frame • Available in skid-mount or trailermounted configuration

www.forconstructionpros.com/21197307

Generac MDG25 Diesel Generator The MDG25 provides three-phase 25-kVA prime power in a compact cabinet that enables transport efficiency while making the generator easy to maneuver and tow.

• Easy to use Deep Sea DSE7310 MKII controller provides full programmability and status screens • Reliable, easy to maintain Isuzu Tier 4 Final diesel engine requires no diesel exhaust fluid or diesel particulate filter • 56-gal. fuel capacity with 28-hour run time • Rugged, steel body design with 67-dBA sound rating • Weighs under 3,000 lbs. to allow for easy towing with no trailer brakes required • Optional 100% fluid containment

www.forconstructionpros.com/21123041

www.forconstructionpros.com/21112985

44 EQU IPM ENT T ODAY | March 2021 ET0321_44-49_Worksite_CB.indd 44

www.ForConstructionPros.com

2/25/21 2:07 PM

SPACE AGE CONCRETE

THE FUTURE IS HERE NOW.

Brought to you by

SPACE AGE CONCRETE is 50% lighter precast, ideal for transporting to work-sites and less wear and tear on equipment and roadways.

5,000 psi + Fireproof Non-Water Intrusive Structural/Architectural Usages

CONTACT US TODAY!

WWW.SPACEAGECONCRETE.COM WWW.ROCKETTGLASSOVERLAY.COM INFO@ROCKETTGLASSOVERLAY.COM CALL US TODAY: 844-7ROCK-00

ET0321_44-49_Worksite_CB.indd 45

2/25/21 2:07 PM

WOR KSI T E E Q U I P M E N T Products

Ligchine SCREEDSAVER ELITE The all-wheel-drive SCREEDSAVER ELITE has a 12-ft. head that allows for more finished square footage per pass, plus its side-shift ability makes it easier to screed around stick-ups in the slab.

• Heavy-duty boom sections reach out to 18 ft.

• Narrower chassis fits through smaller doors or onto smaller trailers • Improved radio provides more intuitive layout and diagnostics at the operator’s fingertips • Includes a 65-gal. onboard fluid tank and an onboard pressure washer for cleanup • Optional dual trackers to match surfaces without extra cabling or software

www.forconstructionpros.com/21195235

Trimble R12i GNSS Receiver The R12i GNSS receiver incorporates Inertial Measurement Unit-based tilt compensation using TIP technology, which enables points to be accurately measured or staked out while the survey rod is tilted.

• Tilt compensation capability builds on the ProPoint GNSS positioning engine and can be used even in challenging environments when other solutions struggle to maintain GNSS and inertial positioning • Receiver operates calibration-free out of the box and is resistant to magnetic interference • Real-time automatic Inertial Navigation System (INS) integrity monitoring detects and corrects for IMU biases introduced by use over time, temperature or physical shocks

www.forconstructionpros.com/21201666

Allen HDX780 Hydra-Drive Extreme Riding Trowel The HDX780 Hydra-Drive Extreme riding trowel features twin 60-in. rotors with five-bladed spiders and is designed for high-volume flatwork concrete.

• Comes with dedicated panning/finishing modes, digital readouts for accurate fuel levels and diagnostics and a large 18-gal. fuel tank • Powerful pumps help maintain optimal torque at rotor speeds up to 130 rpm • Includes electric (joystick-mounted) single or dual blade pitch controls • 50-hp Hatz 4H50TIC turbocharged, liquid-cooled, Tier 4 Final diesel engine • Intelli-drive system allows engine and hydraulics to communicate to ensure peak performance

www.forconstructionpros.com/21113035

Toro Swivel Mud Buggy The Swivel Mud Buggy features a redesigned tub that enables it to swivel 180°, allowing users to dump materials anywhere between the 180° angle.

• Weighs roughly 1,575 lbs., has a 25-hp Kohler Confidant engine and can carry up to 2,500 lbs. (16 cu. ft.) of material • 3/8-in. polyethylene tub material suited for sand, rock, mulch or cement • Swivel switch travels with right-hand control handle for safe machine operation while simultaneously swiveling tub • Auto-return dump feature eliminates need for the operator to wait for the tub to return to the traveling position • Features Endless Kevlar-reinforced tracks and transport speeds of up to 6 mph in forward and 3 mph in reverse

www.forconstructionpros.com/21201663

Minnich Stinger Concrete Vibrator The Stinger is a 14.5-lb. double-insulated universal motor that can drive the full line of Minnich vibrator shafts and heads from 3/4 to 2 1/2 in.

• Motor available in 15 amps (115V) • Speed range of 11,000 to 13,000 vpm • Standard quick disconnect adapts to the vibrator shafts and heads of many other manufacturers • Double-insulated motor runs safely when grounded systems are compromised • Durable protective frame extends vibrator life with urethane end caps that absorb shock while supporting easy to grip handles • Provides quiet operation

www.forconstructionpros.com/20986167

Sullair Perkins-powered Diesel Air Compressor Line This comprehensive line of Tier 4 Final diesel-powered “small air” machines includes the 185, 375H, 400HH and 425H Series models.

• 185 Series delivers 185 cfm at 100 psig and features a 14-series airend and Perkins 404F-E22T engine that is turbocharged to handle high altitudes • 375 Series family includes the 375H, 400HH and 425H providing 375, 400 and 425 cfm at 150 psig and equipped with a 16-series air end, 122-hp Perkins 1204F-E44, fourcylinder engine and oversized 65-gal. fuel tank • Up to 10 hours of run time at full load • Compact designs for easier towing and storage

www.forconstructionpros.com/21117364

Liebherr 110 D-K Crawler Concrete Pump The 16,424-lb. 110 D-K features sturdy construction, can be flexibly maneuvered and has been specially developed for concrete pile foundations in combination with a drilling rig.

• Maximum concrete output of 133 cu. yd. per hour and 1,088-psi maximum concrete pressure • 194-hp six-cylinder Tier 4 Final engine • Open hydraulic circuit • Can communicate via radio with the company’s drilling rigs

www.forconstructionpros.com/21107584

46 EQUIPM ENT T OD AY | March 2021 To learn more about fleet management products, visit

ET0321_44-49_Worksite_CB.indd 46

www.ForConstructionPros.com

2/25/21 2:07 PM

Products WORKS ITE EQU IPMENT

Lind Equipment All-In-One Beacon LED Tower

Dynapac DRP Series Reversible Plate Compactors

Sullivan-Palatek D900HAF Portable Air Compressor

With an adjustable lever and steering height, the DRP15D, DRP15X, DRP20, DRP20D, DRP25D, DRP45DX, DRP60D and DRP70D reversible plates are suited for simple and precise handling in larger areas.

• Powered by a Honda gas or Hatz diesel engine • Rugged design and all-around hard shells can handle extreme conditions • Operator friendly with operating hour meter and easy access maintenance points • Optional attachable mat to increase the area of application

The D900HAF is powered by a 300hp Cat C7.1 Tier 4 Final engine that delivers high power density suited for applications requiring powerful yet compact solutions.

• Electronic Control System enables users to dial in the exact pressure for precise, fuel-efficient operation • Large access doors for easy service • Rugged galvanneal enclosure designed to withstand harsh environments • Smaller size and relatively light weight enable loading onto a truck without the need for a high-capacity crane or forklift

www.forconstructionpros.com/21120881

www.forconstructionpros.com/21200979

Milwaukee Tool MX FUEL 14-in. Cut-Off Saw The lithium ion battery-powered MX Fuel 14-in. cut-off saw (MXF314-1XC) offers fast cuts from start to finish with quick and easy push-button activation.

• Provides the same cut speed as most two-cycle gas saws and a full 14-in. blade capacity to cut more in a single pass • 5-in. cut depth • Up to 50% less noise and reduced vibration for a smoother cut • ONE-KEY compatibility provides ability to track the saw with community tracking and alerts for complete inventory management

www.forconstructionpros.com/21131552

The All-InOne Beacon LED Tower provides the functionality of three separate lighting assets in a single unit.

• Can be used as a generatorpowered tower to illuminate remote work sites with an onboard generator as small as 1,000 W • Easily attachable/detachable clip-on diffuser frames enable use in areas that require diffused, no-glare lighting • Can be powered by an electric external power source • Boasts a tough and durable exterior, 30,000-lumen weatherproof light heads and IP65 wet location rated usability

Makinex SKU: GEN-23-US-480 Three-phase Generator The SKU: GEN-23-US-480 23-kW 480V three-phase generator features permanent magnet brushless alternator technology with completely independent circuits for 120V and 480V. • Can run single-phase and three-phase equipment simultaneously • Weighs 410 lbs., fits through doorways and can safely be taken in internal/ external elevators • 50A, 30A and 20A outlets standard • Provides 10 hours of run time at 50%

www.forconstructionpros.com/21134050

www.forconstructionpros.com/21114611

Somero S-22EZ Laser Screed Machine The S-22EZ features 360° machine rotation, a 20-ft. telescopic boom and a choice of pivoting screed heads.

• Offers zero-turn drive capability with a 360° steering angle • Customized OASIS laser control system • Comes with a full-color LCD display with integrated diagnostics, Quick GradeSet System, automatic throttle and Programmable Quick Pass • Options include a 12- or 14-ft. head width, roller plow, onboard pressure washer with hose reel, operator heat, spray bar and Floor Levelness System

www.forconstructionpros.com/21136302

Hilti SDS-Max Combination Hammer Drill The 22-lb. TE 70-ATC/AVR SDS-Max combination hammer includes Active Torque Control (ATC) technology, which stops the tool body from spinning uncontrollably if the drill bit jams.

• Provides 10.7-ft.-lbs. of single impact energy and full hammering frequency of 2,830 impacts per minute • TE-YX bits and TE-YPX flat and pointed chisels designed specifically to handle tool’s power • Utilizes a brushless motor • Optimum hammer drilling range of 25/32 to 2 5/32 in.

• Includes Active Vibration Reduction, Detachable Power Cord Chiseling and Power Reduction

www.forconstructionpros.com/21205487

Kaeser Mobilair M118 Portable Compressor The Mobilair M118 portable compressor delivers up to 405 cfm at 100 psig.

• Standard power-saving Sigma Profile rotary screw airend • Heavy-duty Deutz Tier 4 Final four-cylinder diesel engine • Onboard Sigma Control Mobil controller enables variable pressure ranges between 87 and 145 psig • Fully weatherproofed polyethylene canopy protects internal components • Includes wide-opening gullwing doors, a steel chassis, torsion bar suspension and oversized tires

At Mi-T-M, we pride ourselves on building mighty, damn good equipment. It’s what sets us apart from our competition. Our industrial line is built to withstand demanding work conditions. When you purchase equipment with the Mi-T-M name on it, you are buying dependable equipment that is designed, built, and tested by good people. Mighty. Damn. Good.

Made in

USA

with Globally Sourced Components

www.mitm.com 800-553-9053

Air Compressor/Generator Combinations | Air Compressors | Water Treatment Systems Air Compressor/Generator/Welder Combinations | Cold and Hot Water Pressure Washers Portable Generators | Water Pumps | Wet/Dry Vacuums | Jobsite Boxes | Portable Heaters

www.forconstructionpros.com/21138339

www.ForConstructionPros.com

ET0321_44-49_Worksite_CB.indd 47

March 2021 | EQ U I P MEN T TO D AY

47 2/25/21 2:07 PM

WOR KSI T E E Q U I P M E N T Products

JCB Towable RS Generators

Ditch Witch JT24 Directional Drill The JT24 directional drill is suitable for a range of urban and residential gas, fiber and other utility installations.

• Hydraulic platform utilizes technology to maximize drilling efficiency and conserve horsepower downhole • 101-hp Cummins Tier 4 Final/Stage V diesel engine • Offers 24,000 lbs. of thrust and pullback while maintaining a small footprint • Wider frame maintains stability without sacrificing maneuverability • 216-fpm maximum carriage speed • Holds up to 400 ft. of drill pipe onboard • Modern next-generation design enhances operator comfort and eases operation and training

www.forconstructionpros.com/21087305

Curb Roller Hydra-Screed HS3000 The Hydra-Screed HS3000 has the weight and strength to move over 6 in. of concrete along the pour while allowing operators to remain in a standing position.

• Screeds up to 30 ft. in length • Rubber inserts can easily be removed to accommodate any desired length of pipe, custom V-flume, crowned roller screed and other desired profiles • Two-way variable speed control • Single pin allows for direction change • Handles pivot into the desired position • Requires 3 to 5 gpm at 2,250 psi

www.forconstructionpros.com/21062138

Husqvarna FS 7000 D Concrete Saw The FS 7000 D diesel walk-behind flat saw comes with a lowemissions, Tier 4-compliant engine.

• Designed for concrete and asphalt cutting up to 17 1/2 in. deep • High output, compact size and good maneuverability provide versatility for mid-sized road work, service work and smaller jobs that require high production rates • Intuitive and ergonomic digital control panel

www.forconstructionpros.com/21134492

The RS generator range includes five Tier 4 Final-compliant models delivering prime power output of 56 to 500 kW (70 to 625 kVA).

• Designed to be towed with operating weights from 7,239 to 25,209 lbs.

• Tier 4 Final aftertreatment consists of selective catalytic reduction and diesel exhaust fluid only • Easy to access controls with automatic mains failure (AMF) and synchronizing capability, with touchscreen controls on larger models • Automatic voltage regulator adjustment can be made from the front of the control panel • Standard JCB LiveLink advanced telematics

www.forconstructionpros.com/21123054

Weber MT MC 85 Trench Roller The MC 85 trench roller generates high centrifugal force combined with a kneading effect of sheepsfoot drums for use in wet clay-like and silty soils.

• Has a 3,576-lb. operating weight, a 32-in. drum width, frequency of 42 Hz and two compaction settings (8,093 and 16,411 lbs.)

• Exciter housing sealed within rollers to protect against dirt and water ingress • 24-hp Kubota D1005 Tier 4 Final diesel engine with Eco-mode automatically switches to idle speed when radio remote control isn’t being operated • Automatically stops when distance between unit and operator is closer than 20 ft. or further than 65 ft.

www.forconstructionpros.com/21112690

Miller Electric Trailblazer 325 with ArcReach ArcReach technology is now standard on Trailblazer 325 welder/ generator gas and diesel models, providing complete control of welding parameters at the weld joint without a control cord.

• Choice of ArcReach accessories enables welders to remotely make process and parameter adjustments for stick, TIG, MIG, fluxcored and advanced wire processes • Standard Auto-Speed technology matches engine speed to load for reduced fuel consumption and lower noise levels • Excel power option provides a full 2,400 watts (20 amps) of 120-volt pure sine wave power at all speeds including idle

www.forconstructionpros.com/21259903

Tenna Fleet Tracker The Fleet Tracker reads diagnostic information from the vehicle engine control unit and transmits live GPS data over a cellular connection to the app.

• Transmits telematics data in-trip such as location, speed, engine hours and other important diagnostic information • Fleet managers can get alerts and monitor maintenance, fuel costs and analytics to maximize vehicle and driver performance • Transmits location information when not in-trip • Electrically rugged device can be installed via OBD or JBUS connection ports and is ultra-compact for concealed installation in most cases

www.forconstructionpros.com/21048593

48 EQUIPM ENT T ODAY | March 2021 ET0321_44-49_Worksite_CB.indd 48

Jenny J11HGA-30P Wheeled Portable Compressor The J11HGA-30P single-stage, gaspowered compressor is a wheeled portable unit that meets high volume requirements while maintaining a durable, compact design.

• Includes a 30-gal. air tank • Belt-driven four-cylinder pump with high compression ratio for producing maximum air flow • Delivers 21.3 cfm at 100 psi or 20.9 cfm at 125 psi • 11-hp Honda GX gasoline engine • Special unloading valves and large flywheel allow easy recoil starting • Pneumatic wheels

www.forconstructionpros.com/10111776

Cummins C12D6RE Mobile Generator Set The 12-kW C12D6RE is powered by a Tier 4 Final-certified, four-cycle, liquidcooled diesel engine and can operate reliably across extreme temperatures, heavy airborne dust and highly humid conditions ranging from -20° to 120° F. • Enclosure incorporates weatherproof sound attenuation • Sound-controlled housing covers the cooling system and muffler, further simplifying the installation process • Features a rugged, robust by design, heavy-duty trailer • Built-in self-diagnostic capabilities simplify troubleshooting

www.forconstructionpros.com/21122995

Leica iCON Field Software Version 6.0 The iCON field software version 6.0 includes improvements that provide fast, precise, real-time verification of justconstructed parts in a building project.

• Enables integration of Leica’s Nova MS60 scan workflows • Provides grid scan functionality from motorized iCON sensors (iCR70/80/80S, iCT30 and MS60) • Delivers in-field verification of point cloud data (MS60) and single-point measurements (iCT, iCR, iCB, MS60) • Offers a straightforward user interface and apps designed specifically for construction professionals • Supports a range of data formats including common CAD and IFC

www.forconstructionpros.com/21220310

www.ForConstructionPros.com

2/25/21 2:08 PM

Products WORKS ITE EQU IPMENT

APT HiLight V5+ LED Light Tower The compact HiLight V5+ LED light tower features a heavy-duty polyethylene canopy designed to withstand extreme elements and working conditions.

• Four LED lamps rated at 350 watts each offer visibility up to 7 acres • Vertical mast can be raised to 25 ft.

• Kubota Tier 4 Final engine • 28-gal. fuel tank enables up to 150 hours of operation with all four lamps before refueling • Environmentally friendly frame design prevents oil, fluids and fuel from leaking out and contaminating the ground

www.forconstructionpros.com/21118790

Geotab GO RUGGED Fleet Tracking Device This scalable, flexible and customizable off-road fleet solution can capture rich data on equipment position, fuel use, idling and more.

• Delivers accurate intelligence for real results • MyGeotab fleet management platform integrates with AEMP and third-party devices • IP67-rated device with LTE connectivity lets you monitor assets out on the work site in real-time • Manage both off-road and on-road assets together • Open platform and Marketplace offer a variety of third-party solution options

www.forconstructionpros.com/21093316

DPL Telematics AssetView Max Tracking System The AssetView Max Tracking System is a portable, self-contained GPS unit that may be hidden on any asset to monitor and improve logistics and inventory management and curb theft.

• No external wiring or antenna • Immediate text and email alerts if the unit is removed • User can activate recovery mode or set movement alerts over the air from the Internet-based software or mobile app • Dual GPS and GLONASS positioning • TruTrace Adaptive Tracking technology increases reporting frequency when movement is detected and automatically reduces it when stationary

www.forconstructionpros.com/21172187

Topcon GT Series Robotic Total Stations The GT-1200 and GT-600 total stations are available in multiple accuracy levels and are part of a full workflow solution.

• Perform at a 10-Hz positioning update rate • Combine with the field computer and software enhancements to make layout easier and guidance more fluid within an intuitive map view • Advanced UltraTrac prism tracking combines optical sensing with an ultrasonic motor control algorithm that maintains optimal prism lock • Optional upgrade incorporates Hybrid Positioning technology for instant location updates via GNSS receivers

Lavina LP36 Ride-on Power Trowel The LP36 ride-on power trowel is equipped with two 36-in. floating pans with four Trowel Shine Tool Holders on each pan.

• Kawasaki FX1000V engine with Fuel Minder for closed-loop fuel management • Heavy-duty shroud protects walls from slurry • Integrated wheel set lifts the trowel (200 mm) for changing blades and tools quickly and easily • Continuously variable transmission adjusts drive ratio to obtain optimum torque and speed during all phases of finishing • LED lighting for better visibility

www.forconstructionpros.com/21113442

Vermeer D23x30DR S3 Navigator Directional Drill The D23x30DR S3 Navigator horizontal directional drill (HDD) integrates dual rod technology into a compact machine design to efficiently maneuver through rock in congested cities, busy neighborhoods or tight jobsites.

• Generates thrust/pullback of 24,000 lbs.

• Threaded outer rod offers a rotational torque of 3,000 ft.-lbs. while the hex inner rod delivers up to 800 ft.-lbs.

• Onboard Firestick drill rod dual system enables a 7% downhole steerability • Features a narrow footprint and a weight of 16,500 lbs.

www.forconstructionpros.com/21072442

THE #1 MATERIALS MARKETPLACE FOR DIRT AND AGGREGATES CONNECT NOW

www.forconstructionpros.com/21198006

EDCO DS-20 Downcut Walk-behind Saw The DS-20 concrete/asphalt saw features a 20-in. blade, allowing users to cut 7 3/4 in. deep without the need for a larger self-propelled unit.

• 13-hp Honda GX390 gasoline engine with heavy-duty antivibration mount • Throttle system with positive locking mechanism ensures a wideopen throttle when engaged during sawing applications • 7-gauge steel blade guard with welded protective segment flap • Easy turn crank for lowering and raising the blade in and out of the cut • Includes a heavy-duty 7-gauge steel laser cut frame, large screw-type depth control, wide T-handles with rubber grips and solid-steel lifting handles

www.forconstructionpros.com/21111934

www.ForConstructionPros.com

ET0321_44-49_Worksite_CB.indd 49

NEW IN 2021:

Soil Connect eTicketing Contactless Verification, Confirmation and Sharing SoilConnect.com March 2021 | EQ U I P MEN T TO D AY

49 2/25/21 2:08 PM

ADVERTISER INDEX ADVERTISER

PAGE ADVERTISER

Antraquip Corp........................................................ 21 Applied Machinery Sales .......................................... 40 ASLAN GPS ............................................................ 46 BKT USA, Inc. ........................................................ 33 Compact Excavator Sales.......................................... 14 Construction News Tracker sponsored by Caterpillar Inc. ................................... 16 Dominion Equipment Parts, LLC. .......................... 36 Eager Beaver General Engines .................................. 51 eBay ..................................................................... 7, 17 Fumoto Engineering of America .............................. 50 Gomaco Corporation ............................................... 43 Induction Innovations .............................................. 50 JLG Industries Inc.................................................... 39 John Deere Construction Equipment......................... 2 Komatsu America Corp............................................ 15 Kubota Tractor Corporation....................................... 5 LBX Company LLC................................................... 9 LDJ Manufacturing ................................................. 27

PAGE

Leading Edge Attachments ....................................... 50 Loftness Manufacturing ........................................... 22 Minimizer ................................................................ 26 Mi-T-M Corp. ......................................................... 47 Nokian Tyres ............................................................ 35 Oriel Attachments .................................................... 20 Rocketts Glass & Concrete Overlay ......................... 45 SANY America Inc. .................................................. 19 Schweiss Bi-Fold ...................................................... 50 Soil Connect ............................................................ 49 Takeuchi Manufacturing Co. ................................... 13 Tenna ....................................................................... 31 Truce Software ......................................................... 29 United Rentals ......................................................... 52 VMAC ..................................................................... 30 Volvo Trucks North America .................................... 25 Wacker Neuson Corp. .............................................. 11 Worksaver Inc. ......................................................... 23 Xtreme Manufacturing ............................................. 38

This index is provided as a service. The publisher does not assume liability for errors or omissions.

WHAT’S ONLINE?

WHY YOU SHOULD PERFORM DAILY TO DO’S ON YOUR TELEHANDLER Creating and following a daily maintenance schedule for your telehandlers will help you get the longest life from your investments.

www.ForConstructionPros.com/21283172

VIDEO: WATCH HOW TRIMBLE’S ROADWORKS 3D ASPHALT PAVING SYSTEM WORKS

Switch to Induction Heat Mini-Ductor Venom HP ®

®

APPLICATIONS: > Bearings > Lug Nuts > Decals & Graphics > O2 Sensors > Rusted Bolts > And 100’s more!

Trimble Roadworks is an automatic 3D screed control system that can help you minimize asphalt usage, reduce waste and overruns and finish projects on time and under budget.

SEE VIDEO: www.ForConstructionPros.com/21259831

The Venom HP is the highest powered Mini-Ductor handheld induction heater available at 1800 watts of power. Allows users to heat metal components faster than ever before!

More precise, safe and reliable than a torch.

Tag us in your photos: #InductionInnovations

www.theinductor.com 877-688-9633

Ripperfection!

Fang Rake

Multi-Ripper

excavator and backhoe leading edge attachments!

360°

Hi-Cap Multi-Ripper Bucket

FUMOTO ®

The Original Engine Oil Drain Valve Since 1976

"Leader in Excavator Rock Ripping Attachments"

eading check out the “Fang Rake” the new “Multi-DigNRip V-Raptor Bucket” dge and the new“Wolverine Ripper” ttachments, 508-829-4855 digrock.com sales@leattach.com digrock Inc. TM

“SHanks on an ARC" technology

®

50 EQU IPM ENT T ODAY | February 2021 ET0321_50-52_OnlineAd_CB.indd 50

ented Design Pat

1-800-918-3406

fumotousa.com

Industry Members, contact us about a free valve sample

www.ForConstructionPros.com www.ForConstructionPros.com

February 2021 | EQ U I P MEN T TO D AY

50 2/24/21 12:27 PM

0

For information right away, please call 800-257-8163.

We make it easier for you to get a price quote.

Visit our web site at eagerbeavertrailers.com, and you're a "click" away from getting all the information you need from our nearest dealer.

Simple, Fast... Guaranteed!

25 XPL

• CAPACITY: 50,000 lbs.

• Air lift front axle standard

20 XPT

w/ Hydraulic Ramps • CAPACITY: 40,000 lbs.

35 GSL/PT • CAPACITY: 70,000 lbs.

75

50 GSL/PT

ANNIVERSARY

• CAPACITY: 100,000 lbs.

For a quote on any model, please call ET0321_50-52_OnlineAd_CB.indd 51

th

1946-2021

800-257-8163

EagerBeaverTrailers.com

2/24/21 12:27 PM

Your worksite just got smarter.

United Rentals Mobile App. Get mobile access to the same tools and features you already use online. With its intuitive design, the app makes it easier than ever to run a smooth and efficient worksite—all from your phone.

Rent Browse and rent, 24/7, from the world’s largest equipment rental fleet.

Manage Request pickup or extend equipment in seconds.

Track Know the precise location of your rental equipment at all times with GPS mapping.

Save Rent only what you need by taking advantage of leniency windows and utilization rates.

Get the United Rentals Mobile App today.

Visit UnitedRentals.com/ET-App © 2021 United Rentals, Inc.

ET0321_50-52_OnlineAd_CB.indd 52

2/24/21 12:27 PM