Concrete Contractor October/November 2016

How to Place a Better Floor

16 October/November 2016

Now available online and on your iPad!

160+ Products Inside

2017

PRODUCT

REVIEW

www.forconstructionpros.com/concrete CONC1016_01_CoverFinal.indd 1

10/12/16 2:37 PM

THE PRECISION TO CAREFULLY LIFT YOUR JAW UP OFF THE FLOOR.

Meet the new Kubota SSV75. Built with the precision engineering you’ve come to expect from Kubota, it features a smooth-running 74.3 HP Kubota diesel engine, vertical loader lift arms, a tilt-up cab and more. The SSV is pure Kubota, and delivers the kind of performance that raises eyebrows.

And drops jaws. Locate your dealer today at Kubota.com/Construction. © Kubota Tractor Corporation, 2015.

CONC1016_02-3_TOC.indd 2

10/12/16 2:32 PM

October/November 2016 | Issue 6, Volume 16

WHAT’S INSIDE

2017

PRODUCT

REVIEW

Product Categories

What’s Online

6 Forms and Reinforcement

52 Sawing & Drilling

12 Pumps, Placing & Consolidation

58 Testing & Software

16 Screeds & Trowels 24 Decorative Concrete Products 32 Concrete Polishing Products & Equipment

56 Repair 59 Worksite Products & Equipment 65 Power Tools, Hand Tools Lasers & Leveling

47 Surface Prep & Dust Extraction

Read these online exclusive articles at www.ForConstructionPros.com/ concrete.

Contractor’s Leap of Faith in Demolition Machines Proves Providencial on Bible Museum Project The Berg Corporation uses remotecontrolled demolition machines to prepare the way for the historical Museum of the Bible in Washington, D.C. Search: 12248146

Features

Departments

16 How to Place a Floor

4 Editor’s Letter

With the Somero Floor Levelness System, contractors now have a tool to help them perform their jobs better and make corrections along the way when using laser screed equipment.

66 Ad Index

Contractor Modifies Concrete Paver to Create Unique Retaining Wall with Sidewalk Profile Marmot Concrete Services added a second conveyor to its three-track GOMACO Commander III concrete paver allowing it to dump two readymix trucks at one time.

Search: 12242557

16

www.forconstructionpros.com/concrete | October/November 2016 | Concrete Contractor 3

CONC1016_02-3_TOC.indd 3

10/12/16 2:33 PM

EDITOR’S LETTER Published by AC Business Media Inc.

The Loss of a

LEGEND

201 N. Main Street, Fort Atkinson, WI 53538 (800) 538-5544 • www.ACBusinessMedia.com

www.ForConstructionPros.com/Concrete PUBLICATION STAFF

Publisher/Editorial Director

Contributing Writers

I

t is with great sadness to report that Harry L. Gressette, along with two other men, were tragically killed in the early morning hours of Friday, October 7, 2016. As of this writing, the circumstances and motives of this crime continue to be investigated by the Berkley County Sheriff’s Office (South Carolina).

A suspect has been taken into custody and charges have been filed.

Harry had a long and extensive career beginning at a young age in his family’s ready-mixed concrete company. He later went on to start his own concrete contracting company, specializing in large placements of concrete flatwork.

But perhaps Harry is best known for being an avid supporter of polished concrete. He was one of the first contractors to provide polished concrete nationwide.

He had a passion for polished concrete and was always willing to teach anyone who asked how to create a polished concrete floor.

In many ways, Harry’s unwavering support and attentiveness to polished concrete helped define the industry we see today.

Facebook.com/ ConcreteContractor

Advisory Board

Ryan Olson, Publisher/ Editorial Director ROlson@ ACBusinessMedia.com (800) 538-5544

Harry was a managing partner of Ardor Solutions. He was a founding board member of the Concrete Polishing Association of America.

With his consulting business, Harry L. Gressette Consulting, he helped develop and implement concrete polishing systems that resulted in making polished concrete a superior architectural product for contractors and their clients.

There is an empty hole in the polished concrete industry now that is irreplaceable. He was a hardworking, honest man with a wealth of knowledge that was unparalleled. His work and contributions to the industry will be his legacy.

Rest in peace Harry. Our thoughts are with his family and friends as we mourn the loss of an industry icon.

Follow us @ Concreteinsider

Kim Basham KB Engineering Cheyenne, Wyo.

Jim Cuviello Cuviello Concrete Polished|Stained|Crafted Stevensville, Md.

Jim Baty Concrete Foundations Association Mt. Vernon, Iowa

Chris Klemaske T.B. Penick & Sons, Inc. San Diego, Calif.

Senior Production Manager Art Director Audience Development Director Audience Development Manager ADVERTISING SALES (800) 538-5544

Jill Draeger Eric Servais Erica Finger Amy Schwandt Sean Dunphy Denise Singsime Lynne Woodworth Melissa Hopkins National Automotive Sales

jdraeger@ACBusinessMedia.com eservais@ACBusinessMedia.com efinger@ACBusinessMedia.com aschwandt@ACBusinessMedia.com sdunphy@ACBusinessMedia.com dsingsime@ACBusinessMedia.com lwoodworth@ACBusinessMedia.com mhopkins@ACBusinessMedia.com Tom Lutzke, tlutzke@ACBusinessMedia.com (630) 484-8040

FORCONSTRUCTIONPROS.COM

Digital Operations Manager

Digital Sales Manager

Editor

Managing Editor

Nick Raether nraether@ACBusinessMedia.com Monique Terrazas mterrazas@ACBusinessMedia.com Larry Stewart lstewart@ACBusinessMedia.com Kimberly Hegeman khegeman@ACBusinessMedia.com

CHANGE OF ADDRESS & SUBSCRIPTIONS

PO Box 3605, Northbrook, IL 60065-3605, Phone: (877) 201-3915 Fax: (800) 543-5055 • circ.ConcreteContractor@omeda.com REPRINTS Ryan Olson, (800) 538-5544, ext. 1306 , rolson@ACBusinessMedia.com LIST RENTAL Elizabeth Jackson, Account Executive, Merit Direct LLC, Phone: (847) 492-1350 ext. 18 Fax: (847) 492-0085 • ejackson@meritdirect.com AC BUSINESS MEDIA INC.

Chairman President and CEO Executive Vice President CFO VP Content VP Marketing

Anil Narang Carl Wistreich Kris Flitcroft JoAnn Breuchel Greg Udelhofen Debbie George

Published and copyrighted 2016 by AC Business Media Inc. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording or any information storage or retrieval system, without written permission from the publisher.

CONCRETE CONTRACTOR (USPS 021-799, ISSN 1935-1887 (print); ISSN 2471-2302 (online) is published 7 times a year: January, February/March, April/May, June/July, August/September, October/November and December by AC Business Media Inc., 201 N. Main Street, Fort Atkinson, WI 53538. Printed in the U.S.A. Periodicals postage paid at Fort Atkinson, WI, and additional entry offices. POSTMASTER: Send address changes to Concrete Contractor, PO Box 3605 Northbrook, IL 60065-3605 October/November 2016, Issue 6, Volume 16

Search: Concrete Polishing

Dennis Purinton Purinton Builders, Inc. East Granby, Conn.

One year subscription to nonqualified individuals: U.S. 1 year: $35, 2 years: $70. Canada & Mexico 1 year: $60, 2 years: $105. All other countries 1 year: $85, 2 years: $160 (payable in U.S. funds drawn on U.S. banks). Single copies available (prepaid only) $10.00 each (U.S., Canada & Mexico), $15.00 each (International).

Canada Post PM40612608. Return Undeliverable Canadian Addresses to: Concrete Contractor, PO Box 25542, London, ON N6C 6B2.

Joe Reardon Diamatic Orlando, Fla.

4 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_04-5_Editor.indd 4

Ryan Olson, (800) 538-5544, ext. 1306 rolson@ACBusinessMedia.com Kim Basham, Jim Baty, Brad Humphrey, David C. Whitlock, Joe Nasvik Cindy Rusch April Van Etten Wendy Chady Angela Kelty

Concrete Contractor is the Official Media Sponsor of the CFA Foundation Company Certification Program

®

10/11/16 1:48 PM

PRODUCTIVITY DEFINED.

VANGUARD COMMERCIAL ENGINES OFFER MORE THAN JUST RELIABLE POWER TO KEEP YOU RUNNING. Technology, strength and support to take on the world’s most demanding job sites. Vanguard offers exceptional service, next day parts delivery* and industry-rst innovations like TransportGuard™—which reduces maintenance and downtime. And all engines are backed the largest sales, service and support network in the industry.

Experience the power to get more done every day.

PUT VANGUARD COMMERCIAL ENGINES TO WORK FOR YOU. Go to VanguardEngines.com to learn more.

CONC1016_04-5_Editor.indd 5

*In most areas.

10/11/16 1:48 PM

FORMS & REINFORCEMENT Pentair Introduces LENTON A22 High Strength Coupler Pentair introduces the LENTON A22 Coupler for high strength applications, such as seismic projects. The coupler was engineered to address the requirements for ASTM A615 Grade 100 reinforcing steel. It is designed to meet the bars specified ultimate tensile strength of 155 ksi. The product is made from 100 percent U.S. domestic steel and is available in sizes #7 through #18. Other sizes are available upon request.

• The A22 Coupler utilizes the same LENTON taper thread so there is no change to the threading of the bar end.

• Quickly and easily connect two pieces of reinforcing steel and improve the steel-toconcrete ratio by eliminating half of the bars necessary in the “lap zone” of a column.

• LENTON products develop higher tensile strength than lap splicing while providing full load transfer.

• Provides confidence in reinforcing steel connections.

ForConstructionPros.com/12257635

PERI Introduces New Slab Formwork GRIDFLEX PERI has introduced a new slab formwork system to the US market. GRIDFLEX is a lightweight aluminum grid element system that saves time by eliminating the need to set up and position girders individually, by providing ready-made aluminum grid elements that are simply hooked into the prophead and erected from below.

Requires only four main components – prophead, one standard and two filler elements – making GRIDFLEX intuitive and straight forward.

• After an area is enclosed, the grid just needs to be covered with any grade of plywood which is then nailed down to the aluminum struts.

• The lightweight design, with a standard element only weighing around 40 lbs., allows a single person to easily handle the system.

• GRIDFLEX is expected to be a major productivity upgrade in terms of time and labor savings for contractors who are still doing a lot of work with girder slab formwork or heavy panel slab formwork.

ForConstructionPros.com/12055112

Concrete Formwork Concrete Formwork provides valuable information on the construction and safe assembly and disassembly of formwork for residential, light commercial, and heavy commercial structures.

• Various aspects of concrete construction methods are presented in sequence, from site preparation through concrete placement and stripping forms.

• This edition has information on personal fall-arrest systems, concrete exposure hazards, concrete reinforcement, and heavy construction equipment and safety.

ForConstructionPros.com/12005192

Fascut FR-800-C Rebar Bender/Cutter The Fascut model FR-800-C bends and cuts up to #8 (1-in. diameter) rebar.

• Fabricate stirrups, hooks and 3-D bends and cut bars to length.

• Plugs into a standard 110-volt outlet.

• Use it on the jobsite or in the shop.

• Optional programmable angle controller available.

ForConstructionPros.com/12260543

Twister Rotary Tying Tool The Twister Rotary Tying Tool is designed to cut, twist and tie rebar in place.

• Cuts excess wire on closing.

• No batteries or electricity required.

• Operator controls the tightness of the tie.

ForConstructionPros.com/10165436

Doka Truss Table The Doka Truss table represents the fastest method to set and strip large slab formwork. This is a must to handle today’s demand for high-speed construction cycles.

• Fast construction cycles with substantial labor savings and optimized large tables for your project.

• Speed up your forming times by safely cycling large tables of up to 2,150 square feet per crane lift.

ForConstructionPros.com/12115837

•

One Series with DURA MULTILINK Technology by NUDURA The One Series by NUDURA is a multi-link form offering builders and architects unmatched versatility for projects designed using ICFs. At the core is DURA MULTILINK Technology, offering users the ability to create a wide variety of custom multi sided form combinations.

• The One Series combines traditional forming methods and ICF technology together to offer the ability to construct elevator shafts, stairwells and other areas where non-combustible products are required.

• The design easily allows installers to remove the form ply after concrete placement to expose a smooth concrete surface on one side and a fully insulated wall on the other.

ForConstructionPros.com/12108442

6 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_06-11_Forms.indd 6

10/26/16 2:11 PM

LENTON

REINFORCING STEEL CONNECTORS Millions of LENTON reinforcing steel connectors have been used in the most demanding projects worldwide.

As a pioneer in the construction industry, LENTON products are world renowned for Quality, Reliability and Performance. And, LENTON products meet or exceed worldwide code compliance requirements.

Buildings

Stadiums

LENTON – the brand to trust.

Air Traffic Control Towers

Dams

Bridges

Nuclear

LENTON provides confidence in reinforcing steel connections.

www.erico.com

Tunnels

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifi cations without prior notice. © 2015 Pentair.

CONC1016_06-11_Forms.indd 7

10/26/16 2:11 PM

FORMS & REINFORCEMENT Prinsco PROFORM Pipe System

Dayton Superior Sym-Ply Forming System

PROFORM is an easy-to-install pipe system that creates a permanent form for foundation footings, and also provides drainage and radon venting in one product. Self coupling pieces are easy to cut and fit on the job site.

• Made from high-density polyethylene plastic which is lightweight, durable and resistant to cracking or chipping, unlike alternative products made from PVC ForConstructionPros.com/11508023

Dayton Superior Corporation is expanding the capabilities of the Symons brand Sym-Ply forming system in the South American market with the introduction of Sym-Ply transition fillers.

• South American contractors can easily connect Imperial Sym-Ply forms to metric Steel-Ply forms using wedge bolts and/or the Sym-Ply clamps.

• Developed to meet the high demand for Steel-Ply and Sym-Ply forming systems in the South American market.

• Made in the USA, Sym-Ply transitional fillers will be produced in the company's Elk Grove Village, Ill. facility.

ForConstructionPros.com/12045099

D-Rv Slide-in Drainage Panel

The Next Generation of Concrete Forming Nailer Strips Unveiled by UFP Concrete Forming Systems

Logix D-Rv is a precision engineered slide-in panel that delivers an interior drainage system and additional R-Value.

• Been tested to have 96% drainage efficiency.

• Offers an additional R8 of thermal performance.

• Offers additional insulating power added to exterior wall face.

ForConstructionProscom/11273476

Knowledge Is Your Competitive Edge Keep your competitive edge with print and digital learning resources from ATP. We publish a broad range of materials that build confidence by focusing on the skills and applications necessary to succeed on the job site and in the classroom.

K-Form Concrete Formwork System

ATP learning materials feature: • Effective Instructional Layout • Field-Related Applications • E-Textbook Options • Digital Learning Tools

This "one concept" approach to slab production eliminates the materials, transportation and clean-up of temporary forming methods and form anchors as well as the need for any dowel placement components.

• Lightweight PVC, cast-in-place screed rail is strong enough to handle all types of mechanical screeds.

• Provides a built-in expansion joint; predrilled dowel holes; and a built-in, removable void cap.

• 2- to 8-in. slabs.

• Ideal for use with vapor barriers.

• Form driveways to multideck pours to industrial slabs.

ForConstructionPros. com/10367320

Scan here to visit our website for more product information.

@ATP_Connect Your Partner in Learning

800.323.3471•atplearning.com

UFP Concrete Forming Systems announces a line of nailer strips made using an industry-changing, fully-fibrous, extruded composite that offers strength, stability and durability unheard of in common wood nailer strips.

Using Eovations technology, UFP Concrete Forming Nailer Strips are ready-to-use and are the highest-quality, longest-lasting strips available.

• The composite’s durability provides a virtually self-healing resilience without chipping, rotting, shrinking or swelling.

• No longer will contractors have to make their own nailer strips that wear out fast from repeated nailing and from rot due to moisture and exposure to the elements.

• Made in the USA. • UFP Concrete Forming Nailer Strips are reusable time and again.

• The strips offer superior nail retention for securing plywood to aluminum beams—saving time, money and eliminating waste.

ForConstructionPros.com/12041992

16

8 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_06-11_Forms.indd 8

10/26/16 2:11 PM

MAX USA CORP. Introduces the New RB398

Forta-Ferro Forta-Ferro is a synthetic macro fiber reinforcement used to reduce plastic and hardened concrete shrinkage, improve impact strength, and increase fatigue resistance and concrete toughness.

The RB398 is capable of tying rebar up to #6 by #5 and also double #4 by double #4 with up to 2,600 ties per charge.

• 4.0-Ah 14.4v lithium-ion battery.

• Features a brushless motor, trigger lock, torque adjustment dial, reversible belt hook, carrying case and automatic shut-off.

• Standard charger and battery pack.

• Designed for simple operation.

ForConstructionPros.com/12157520

MMFX2 Rebar MMFX2 provides up to twice the strength of conventional steel while maintaining ductility.

• Unique steel microstructure results in five times more corrosion-resistance than conventional steel without the use of any coatings • Can provide a 100-year service life in bridge structures • Currently available in three forms: rebar, coil and smooth rounds.

ForConstructionPros. com/10832910

KODI KLIP Rebar Fastening System The KODI KLIP Rebar Fastening System produces safe, stable rebar connections at low cost.

KLIPPER GUN's pneumatically attach, noncorrosive and features a four-point grip. K-Klips can be used on cross, parallel and vertical framework, form spacers, cages and mats.

ForConstructionPros.com/11477603

Designed to mix and finish well, even at high dosages.

• Use in a variety of applications, including extended-joint floors, decorative and polished slabs, pervious pavements, and slabs on deck.

• Made of 100% virgin copolymer/ polypropylene.

• Non-corrosive, non-magnetic and 100% alkali proof.

ForConstructionPros.com/11173278 •

CUT and BEND REBAR

®

rt Smao rs, Sensart Sm ces!

Choi

At the Shop or Jobsite

5.0 REUSABLE So advanced, it’s almost automatic

4.0 EX SINGLE USE #8 bar rotary bender/cutter combo

#1 selling RH test on the market for over 10 years

U.S. Patent 7,231,815, 8,047,056 & 9,032,791. Additional patents pending

Portable #6 bar cutter/bender

Replacement blades for most brands

www.RebarBlades.com

Quality rebar equipment since 1979

FASCUT Industries Inc. (608) 643-6678

www.fascut.com

• Easiest to Comply with ASTM F2170 • 10 Times FASTER • Lowest Cost/Test • Simplest to Use

MAKE YOUR SMART CHOICE TODAY  CALL NOW 1.800.207.2543 • WWW.RAPIDRH.COM

www.forconstructionpros.com/concrete | October/November 2016 | Concrete Contractor 9

CONC1016_06-11_Forms.indd 9

10/26/16 2:11 PM

FORMS & REINFORCEMENT NewForm PoliGloss Concrete Forming Tubes NewForm PoliGloss concrete forming tubes are designed to produce a high-gloss finish without spiral seams, eliminating the need for extensive manual finishing.

• Weather Shield improves water resistance and minimizes schedule changes due to inclement weather.

• QuickStrip Technology provides a quick and convenient method for the removal of forms without the use of a saw.

• One-time use.

• Available up to 60 in. in diameter and up to 30 ft. in length.

• 100% recycled paperboard.

ForConstructionPros.com/11251256

E-Maxx Energy efficient concrete wall structure.

• Features R-Values ranging from R-10 to R-25.

• Each wall consists of cast-in-place concrete, E-Maxx Corners-T-Studs, foam insulation and drywall or other finishing material.

• Walls can be poured with insulation on both sides to increase energy ratings.

• Inhibits mold growth and removes the source of food for insects and other pests.

ForConstructionPros.com/10184476 •

Bend and Cut Rebar Fast Fascut’s Model FS-600 combination rebar bender and cutter is a portable self-contained hydraulic workhorse that plugs into standard 110-volts or can be run from a generator.

Fabricate stirrups, hooks, 3-D bends and cut bars to length at the shop or job site.

• Bend and cut through #6 (3/4”) rebar.

• Two people can lift and carry.

• Made in the USA. ForConstructionPros.com/12002646

10 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_06-11_Forms.indd 10

10/26/16 2:11 PM

ACCEPT NO SUBSTITUTE 100+ SEMINARS • HANDS-ON TRAINING • TRAIN-THE-TRAINER • MASTER CERTIFICATES • INTERACTIVE WORKSHOPS

It’s a fact: The most effective education program in the industry is at World of Concrete. Use it to equip yourself with the information—and certification—you need to stay at the top of your game and profitable in the modern concrete marketplace. Explore the latest innovations in technology, materials, techniques, and equipment and learn why there is absolutely no substitute for a WOC Education.

At World of Concrete, KNOWLEDGE IS KING. Register and plan your seminar schedule today.

»www.worldofconcrete.com

CONC1016_06-11_Forms.indd 11

JANUARY 17-20, 2017 SEMINARS: JANUARY 16-20 LAS VEGAS CONVENTION CENTER LAS VEGAS, NV, USA A selected participant in the International Buyer Program

10/26/16 2:11 PM

PUMPS, PLACING & CONSOLIDATION Continuous Cellular Concrete Production Machine Richway CreteFoamer Model CS-6G

Blastcrete D3522 Attachment Hot Epoxy Grouting The D3522 features a hydraulic squeeze (peristaltic) pump that can deliver hot epoxy or cementitious grouts at variable speeds from 0 to six cu. yds. per hour and up to 400 psi of pumping pressure.

• It can also be used for spraying plaster and for small wet shotcrete applications.

• The pump can be easily reversed for 5 seconds to relieve pressure on the delivery hose when plugged.

• The lightweight, easy to transport attachment can be powered by an existing hydraulic power source, such as skid steers and other equipment with auxiliary hydraulic hookups.

ForConstructionPros.com/12024615

The Cretefoamer Model CS-6G fits in a 3/4-ton pickup yet is capable of producing up to 6 cu. yds. an hour of cellular concrete on a continuous basis. It is designed to do jobs of two to 40 yds. in less than a day.

• The cellular concrete produced can range from less than 30 up to 100 lbs./ cu. ft. or more.

• Power is provided by a Honda gas engine running a 150-amp alternator and all-electric drives.

• An onboard 65-gal. water tank can produce 8 yds. of 30-lb./cu. ft. cellular concrete without refilling.

• It is capable of pumping up to several hundred feet depending on mix design and density of the material.

ForConstructionPros.com/12245678

FiberMax Dunnage Pads from DICA The FiberMax Heavy Duty and Super Duty Dunnage pads provide a rigid foundation for outrigger-enabled equipment, including concrete pumping equipment and mobile cranes.

Heavy Duty 0.75-in. option offers a crush rating of 2,000 psi and rated capacity of 200,000 lbs.

• Two Super Duty 1.5-in. options feature a crush rating of 2,500 psi and a rated capacity of 250,000 lbs.

• Not affected by the elements or prolonged use and guaranteed to be unbreakable.

ForConstructionPros.com/12166855 •

Putzmeister Upgraded Thom-Katt Trailer Pump Line The TK 40, TK 50, TK 60 HP and TK 70 trailer pumps feature a relocated fuel tank and a new control box with display.

• Fuel tank relocation featured on single- and tandem-axle units to allow for increased ground clearance for better access over rugged or uneven terrain.

• Control box provides for a more active presentation of pump information, diagnostics and an emergency run mode.

• Designed to handle harsh mixes and a variety of difficult applications.

• Offer easy filling and operation, fast setup and simple cleanup.

ForConstructionPros.com/12085007

Allen Intelli-Vibe HighFrequency Vibrator Allen presents their new AHFV22 highfrequency vibrator. It will equip concrete professionals with a powerful, compact and efficient solution for better concrete consolidation in most applications. The AHFV22 is equipped with Intelli-Vibe which utilizes internal sensors to control vibration in response to concrete slump variations and rebar blockage. This ensures consistent high centrifugal force, stable speed and high amplitude for professionally consolidated concrete.

• Featuring a built-in frequency converter, users will only need a regular wall socket -- no need to purchase expensive generators or inverters.

• Essentially maintenance free and light weight.

ForConstructionPros.com/12258696

GCP Applied Technologies Introduces TYTRO Admixture System for Shotcrete Applications GCP Applied Technologies Inc. has introduced the TYTRO Shotcrete System, a complete state-ofthe-art admixture solution that makes shotcrete for underground construction better, faster and less expensive than conventional systems available today. The TYTRO System includes a nanotechnologybased rheology control agent, patented macro synthetic fibers, and a number of other newly developed admixtures that enhance productivity of the spraying operation and material performance.

• The TYTRO Shotcrete System provides underground construction professionals with the capability to reduce operating costs and minimize excavation downtime, without sacrificing performance or relaxing safety standards.

• The TYTRO Shotcrete System provides faster early strength and enhanced bonding-torock with an increased one-pass thickness build-up.

• The system also minimizes rebound during spraying.

ForConstructionPros.com/12258812

12 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_12-15_Pumps.indd 12

10/11/16 1:58 PM

Line Dragon Concrete Placement Unit The Line Dragon is a remote-controlled concrete placement machine that saves workers from having to drag concrete delivery line during a pour.

• The placer drags the end of the delivery line and places concrete while the dragger is hooked 20 ft. back carrying excess line and keeping it out of the pouring area.

• Will run over rebar grid, radiant heat lines, nelson studs, floor decking or other prepared surfaces.

• Placing boom swings 360°.

• Moves forward, backward, left, right or oblique.

• Weighs about 1,000 lbs.

• 12-hp gas engine.

ForConstructionPros.com/10082119

Vibco KA-4 High Frequency Pneumatic Internal Concrete Vibrator A new addition to VIBCO’s High Frequency Pneumatic Internal Concrete Vibrator. It is a continuous duty, air cooled, low air consumption air operated vibrator.

• 4" dia. (102 MM) steel head.

• 15" (380 MM) long. 10 ft. (3 M) long flexible rubber hose standard.

• The vibrator speed 12,000 - 15,000 vibrations per minute.

• The vibrator produces 5,540 lbs. centrifugal.

• 53 CFM at 90 psi (1.5 M³/min @ 6.2 Bar) air consumption.

ForConstructionPros.com/12239658

Graco ToughTek Portable Stucco Pump Graco Inc. recently introduced the ToughTek Portable Stucco Pump for stucco and EIFS (Exterior Insulation and Finish System) materials, the newest addition to Graco’s ToughTek product line. Compact and portable, ToughTek Pumps use piston pump technology to deliver abrasive materials with a smooth, steady flow.

For EIFS applications, the ToughTek S340e Stucco Pump handles air/water-resistant barrier materials, EIFS base coats and finish coats. For stucco applications, the unit handles scratch coats, brown coats and finish coats.

• Variable speed controls allow contractors to dial in the exact flow rate needed, from low to high-volume output.

• The pump plugs into a standard 120V wall outlet or may be used with a 5.5 kW generator.

• Easily lifted by two people and comes with a 20-gallon hopper.

ForConstructionPros.com/12157245

Chicago Pneumatic Electric Pokers Designed for use in medium to high slump concrete, Chicago Pneumatic electric pokers are effective and efficient. Light and easy to handle, they provide the vibration needed to remove air voids in the concrete.

• Fast startup, a wide radius of action and rapid acceleration for removal of air voids add to the effectiveness.

• The electric motor is highly efficient and the low voltage helps protect the operator.

• The lineup includes the VPE 40, VPE 50, and VPE 60.

ForConstructionPros.com/12239612

Wacker Neuson Flex Shaft Vibrator Motors The M1500 and M2500 electric motors for the HMS flex shaft vibration system are adaptable to all shaft and head combinations, including flex shafts ranging from 1.5 to 30 ft. and vibrators heads with diameters from 1 to 2.75 in.

• Lighter weight than previous models.

• Carbon brushes with up to 500 hours of run time, double-insulated construction with increased thermal capacity and a dual air filter contribute to long service life.

• Filter can be quickly accessed from the outside by loosening just one screw, enabling easy replacement.

ForConstructionPros.com/12148425

Atlas Copco SMART Electric Concrete Pokers The 230-volt SMART electric pokers feature a radius of action that is 12 times the diameter of the poker heads, enabling them to work faster to remove air voids from concrete.

• Available with 1 -7/8- and 2 -3/16-in. poker heads • Can work in areas as large as 22 in. in diameter, minimizing the number of dips required.

• Operate with high centrifugal force and amplitude to provide as much as 12,000 vpm.

• Plug into a 120-volt outlet and include a builtin frequency converter.

• Come with 32.8 ft. of electrical cable and 16.4 ft. of hose, with longer hose options available.

ForConstructionPros.com/10838205

www.forconstructionpros.com/concrete | October/November 2016 | Concrete Contractor 13

CONC1016_12-15_Pumps.indd 13

10/11/16 1:58 PM

PUMPS, PLACING & CONSOLIDATION Wyco ErgoPack Backpack Vibrator

Schwing Adds Tier 4 Engine SP 500 Stationary Pump The SP 500 stationary concrete pump offers up to 45 cu. yds. per hour output and 1,100 psi maximum pressure on the material.

• 74.5-hp CAT C3.4B Tier 4-compliant diesel engine and open-loop hydraulic system.

• Twin-cylinder, all-hydraulic pump handles up to 1.5-in. aggregate with its 6-in.-diameter pumping cylinders operating through a 39-in. stroke.

• Rock Valve sequences the concrete to the pumping cylinders.

• Skid-, truck- or trailer-mounted units.

• Standard cable remote or optional radio remote control.

ForConstructionPros.com/12178572

The ErgoPack gas-powered backpack vibrator offers an ergonomic design where the engine weight is supported by the operator's hips.

• One user can vibrate low- to high-slump concrete with up to a 2-in. head.

• Adjustable straps fit all operator sizes.

• Flexible throttle design adjusts for operator comfort and features a "kill switch" and lock-in of the proper vibration speed.

• Honda four-cycle 50cc engine with a heavy-duty clutch mounted on a rugged steel frame.

• Quick-disconnect method of connecting shafts is compatible with the 994 and SureSpeed electric motor vibrators.

ForConstructionPros.com/11446170

MagVibe PRO from Superior Innovations MagVibe PRO can be attached to any float using the QAS (Quick Attach System).

Turn the two knobs and install on the desired size float for the job. The lightweight body is made from a die cast aluminum alloy with sealed bearings to protect the inner beveled gears. The high frequency vibration allows the contractor to release the air within the concrete for a harder, stronger finish.

• Brings the cream to the surface on low slump concrete, helping the finisher cover more surface area in a quicker amount of time.

• LED battery indicator gives the operator an accurate display of the battery life, which can last up to 20 hours on a single charge.

ForConstructionPros.com/12263348

Alliance JXLZ 38 Features Lighter Design

Olin Engineering 5 220CA Pump

Both powerful and light, the design on the JXLZ 38 meter hits the scale beneath the legal limits in more markets.

Olin Engineering, Inc. has pushed CFA Pile grouting to the max with its latest version of the 5 200CA, the 5 220CA. According to the company, Olin is the most commonly used pump in the CFA or “Auger Cast” Pile Deep Foundation industry.

• Powered by a 260 hp Cummins and 250cc of Kawasaki hydraulic pump, it will empty 10 yard loads of structural grout mixes in under three minutes.

• The company builds five models exclusively for the application from 75 to 200 yph.

• A complete line of stationary concrete, shotcrete and ½” minus aggregate ball valve pumps are available.

ForConstructionPros.com/12061229

Tight, highly functional, outrigger footprint.

38-meter boom offers versatility and articulation.

• Streamlined lower-profile side panels and high-strength Rotec pedestal design.

ForConstructionPros.com/12057143 • •

Oztec BP50a Backpack Concrete Vibrator The BP50a backpack concrete vibrator now has CE Mark approval certifying it has met EU consumer safety requirements. The vibrator features a totally enclosed rotary throttle that prevents wet concrete from entering and clogging the throttle mechanism.

• Will run steel and rubber vibrator heads up to 2-1/2 in.

• Vibrator heads develop 12,000 vpm and never drop below 10,000 vpm.

• Standard Quick Disconnect "QD" system, Honda gasoline engines and "speed-up" transmission.

ForConstructionPros.com/10082973

Carbon Fiber Concrete Boom - CIFA K45H Irvng Equipment is offering the CIFA K45H. The first three booms are fabricated from highstrength steel and the last two sections are made from carbon fiber.

• 5-section R-Z style boom system with Valme 5-in. metric pipe along the entire length.

• HPG 1408-IF9 has an output of 185 yards per hour (1,160 PSI) using 9-in. pistons and a 9-in.

S-tube.

• Comes standard with an HBC brand remote control system.

ForConstructionPros.com/11362586

14 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_12-15_Pumps.indd 14

10/11/16 1:58 PM

PERFORM AT A HIGHER LEVEL

PRO-TECH Certified Pre-owned Equipment

Designed to accommodate your specific budget, the Putzmeister Pro-Tech Certified Pre-owned Equipment program gives you the ability to diversify or enhance your fleet with affordable equipment. Available for boom pumps and Telebelts ®, the Pro-Tech program offers a multi-tiered service menu, with products ranging from “as-is” units to completely refurbished models that have been remanufactured to meet our original high standards. Many Pro-Tech Certified pre-owned models come with a new warranty, a reflection of Putzmeister’s commitment to quality concrete solutions and support for the pre-owned market.

At Putzmeister, exceeding your expectations isn’t a goal – it’s mandatory.

Visit pmaprotech.com to locate the equipment you need to perform at a higher level.

866.884.8801 | PMAProTech.com

CONC1016_12-15_Pumps.indd 15

10/11/16 1:59 PM

SCREEDS & TROWELS

By Ryan Olson

How To Place a

Better Floor

With the Somero Floor Levelness System, contractors now have a tool to help them perform their jobs better and make corrections along the way when using laser screed equipment.

E

arlier this year at the World of Concrete, Somero Enterprise Inc. introduced the Somero Floor Levelness System which monitors laser screed performance, operator performance, and reports alert percentages of possible issues during the screeding process.

Myron Hillock, Sales Director for Somero Enterprises Inc. says the company has been looking for ways to make things simple for the laser screed operator. “Between the diagnostics in our heads up display and the new visual Somero Floor Levelness System, operators may now receive live feedback during each screed pass to better improve floor quality on the fly while screeding a concrete floor.”

With this new system, the operator and the machine work better together, improving consistency and therefore have more opportunity for

better Floor Levelness (FL) numbers.

Achieving good numbers however, leads to more questions.

“If a poor FF/FL test occurs, perhaps the screed is assumed the cause.

But when we dive in to examine FL problems days after a pour, it could be operator issues, mix design issues, finishing issues, and not related to the screed at all,” Hillock says. “So now what this tool gives us is the ability to evaluate in real time the operator and the screed performance and support that with a detailed report. We are now evaluating on a daily basis, how good the operator is doing and how well the machine is performing.

If there are any deviances, they are going to appear.”

Matthew Kangas, Somero Floor Levelness System Engineer says

In this example, of all the passes that have been recorded so far on this day, the left hand side reported an average of 429 while the right side reported an average of 415. This indicates that the operator and both sides of the machine are performing well with some room for improvement.

The icon alerts at the bottom would indicate the specific areas to improvement.

Photo Credit: Somero Enterprises Inc.

the development of this system has taken a lot of what engineering has gathered over the years and created a system to make the machines better and brings that power to the operator.

16 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_16-18_ScreedsTrowels.indd 16

10/11/16 1:50 PM

Pictured here is a basic summary report.

For a more detailed analysis after the job, operators may download the data to a USB stick. The data is then sent to Somero Customer Support and a report is created. The report is analyzed and feedback is provided to the contractor.

Photo Credit: Somero Enterprises Inc.

“The system will tell the operator right away about what they can do to improve and what they can do to have their machine run better,” Kangas explains. “The system reports whether the screed ran different from the day before. If you have a new operator or an experienced operator, they can hone in on how to improve their FL numbers”.

One of the other aspects of this new system is while the specs on a floor project may not call for it, the expectation of higher and higher FL numbers is always out there from the owner, GC or the contractors themselves.

“Operators will always strive to get good numbers, as an industry, that expectation will always exist and this system will improve the quality of the floor being placed and it will make the contractor’s life easier with greater piece of mind,” Hillock says.

A TOOL OF THE TRADE Contractors may not always take on projects that specify high FL numbers, however, a contractor does want to know how to achieve those numbers when it is needed.

“This tool is systematic and consistent so the operator knows what numbers they can achieve and it gives them confidence when they bid these jobs with specs for a higher FL number,” Kangas says. “Responding to the feedback allows the operator to achieve a higher quality floor.”

TRAINING TOOL Installation of the device is simple.

Once installed, the operator pushes a “record” button and the system will begin recording every screed pass during screeding. In doing so, every pass is giving feedback to the operator in real time. The system

“scores” each pass independently on the left and right side on a scale of 0 to 500. During this time, nine parameters are being recorded. As the operator continues each pass, icons will display on the bottom of the screen to show the operator what he/she can improve.

For example, if the head of the screed came down too hard during a touchdown, the system will alert the operator of the event and give them the opportunity to immediately correct it before finishing the rest of the pass.

The Somero Floor Levelness System offers operators a visual alert on screen to make adjustments to the screed or redo the pass to improve the floor quality. There are four hot keys on each side of the screen that coincide to different icons. Located at the bottom of the screen are nine icons which represent nine different parameters the system is measuring with each pass of the screed.

If you look at the picture (page 16), it shows 431 on the top left and a 294 on the top right. These numbers represent the quality of the pass independently on the left and the right side of the screed head. As the screed pass continues, the number will fluctuate—500 is the best, zero is terrible.

The numbers underneath are a running total or summation of all the screed passes thus far. In this case, 429 on the left and 415 on the right.

“In this example, of all the passes that have been recorded so far on this day, the left hand side reported an average of 429 while the right side reported an average of 415,” Hillock says. “This indicates that the operator and both sides of the machine are performing well with some room for improvement. The icon alerts at the bottom would indicate the specific areas to improvement.”

www.forconstructionpros.com/concrete | October/November 2016 | Concrete Contractor 17

CONC1016_16-18_ScreedsTrowels.indd 17

10/11/16 1:50 PM

SCREEDS & TROWELS Pictured here is the summary report. At any time, the operator may also push a summary button and see how many times there were alerts and instantly know what they need to work on as it relates to the operation of the machine.

Photo Credit: Somero Enterprises Inc.

“If the system is set up consistently each day, a contractor will put down a better floor,” Kangas explains. “The data collected will detect if the machine is stabilized properly and will allow the operator to fine tune how to run the machine.”

At any time, the operator may also push a summary button and see how many times there were alerts and instantly know what they need to work on as it relates to the operation of the machine.

For a more detailed analysis after the job, operators may download the data to a USB stick. The data is then sent to Somero Customer Support and a report is created. The report is analyzed and feedback is provided to the operator and contractor. According to Hillock, “The Advanced Report option will graphically chart relative location in relationship to the pour where each icon alerted. When you overlay this data with the

testing agencies individual FF / FL run data, obvious similarities become glaringly apparent.”

“The report will tell the operator what they can do to improve their floor,” Kangas says. “It’s a very powerful tool.”

It’s important to note, the system is not measuring the FL of the floor, but instead, how well the operator performed and how well the machine performed to the laser beam.

“The way the system operates is it is evaluating how accurate we are to the laser beam,” Hillock notes. “If an operator takes due caution in setting up the laser at the beginning of the day and the contractor makes sure their laser transmitters are routinely calibrated for accuracy, this system can provide very valuable information to the contractor.”

DESIGNED FOR ALL OPERATORS

Now Available!

Screed Support System NEW from Spin Screed, the Screed Support System reduces fill volume by 85% compared to a pipe screed.

Complete Please visit our website

spinscreed.com

to see videos & our complete product line.

888-329-6039

4932 Lake View Drive • Quincy, IL 62305

Rugged 22’ Wide Screed

1,599*

$

+shipping

*prices subject to change

The Somero Floor Levelness System is designed to be useful to all types of operators. New operators may recently have completed their training or only accomplished a few actual pours so far, or they may have years of experience and seasoned operators.

“For the new operator this system will quickly identify their strengths and weak points, electronically. So rather than learning by trial and error, it will help a new operator get up to speed to be more proficient much quicker,” Hillock says. “The experienced operator on the other hand will be able to see things such as new technology or features he/she may not be taking advantage of correctly or show him/her things they may be doing improperly that they were not previously aware of.”

The system is available as an option for all Somero S-22E Laser Screed models.

Ed. Note: For more information, contact Somero Enterprises at www.somero.com or phone (239) 210-6519.

18 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_16-18_ScreedsTrowels.indd 18

10/11/16 1:50 PM

SCREEDS & TROWELS Ligchine International Introduces the BOSS 240 Laser Guided Screed

Multiquip HTX- and STXSeries Trowels The MQ Whiteman HTX6H-Series provides 8 ft. of coverage and the ability to pan float and finish floors.

• The MQ Whiteman STX6H-Series offers 10 ft. of coverage for pan floating high-tolerance concrete floors.

• The fully hydraulic machines feature a 66-hp Hatz liquid-cooled, Tier 4 Final diesel engine, which drives a hydraulic system that turns twin six-blade rotors at up to 160 rpm for the HTX6H and up to 130 rpm for the STX6H. • A multifunction screen displays data on engine speed, fuel levels and engine alerts.

Both models include SmartPitch control to synchronize raising and lowering of blade pitch for both rotors at the touch of a button.

ForConstructionPros.com/12169702

The BOSS 240 includes wireless remote control, fully automatic operation, 2D laser control and optional 3D satellite control.

• Powered by a 57-hp Kubota WG1605 gasoline engine or optional Kubota LP gas engine.

• Capable of 240 sq. ft. of coverage per pass with an 18-ft. boom combined with a 13.5-ft. Superflat screed head.

• The zero turn drive system independently turns the upper boom or lower drive frame 360o via hydraulic remote control.

• The concrete additive sprayer includes a spray bar on the screed head, an onboard spray tank and automatic on/off activation.

• The unit can be hauled with a pickup truck/trailer combination.

ForConstructionPros.com/12164074

MBW F36 and F46 Walk-behind Power Trowels These 36- and 46-in. walk-behind power trowels feature heavy bearings, output shafts, gears, spiders and blade arms.

• Longer handles provide greater leverage, are adjustable to fit the operator more comfortably and absorb trowel torque.

• Balanced for performance and reduced operator fatigue.

ForConstructionPros.com/12169700

EDCO’s Variable Speed Trowels

HDX 780 Hydraulic Riding Trowel

These Variable Speed Trowels are specifically designed for trowelon epoxy overlays and epoxy mortar floor installations.

• Twist dial allows easy control of speed from 0 to 88 rpm.

• Variable speed capability allows use for other kinds of flooring applications, including improving the surface of terrazzo and some concrete installations.

• Available “Tote-A-Trowel” dolly makes moving heavy trowels a one-person job.

ForConstructionPros.com/12169698

The 3,055-lb. HDX 780 all-hydraulic riding trowel features 60-in. six-blade rotors, providing a panning path of 139 in. wide.

• Hydraulic system features a patented loadsensing device designed to improve torque.

• Independent hydraulic pitch control.

• 99-hp Kubota turbocharged diesel engine.

ForConstructionPros.com/12000811

EZ Screed Pro Two The new EZ Screed Pro Two allows a twoperson team to screed concrete in unison in an upright position.

• Set includes two handles that attach to any 10- to 16-ft. screed board, aluminum or wood.

• Pivoting mounting brackets.

• Powder coated steel handles weigh 5 lbs. each and include textured hand grips.

ForConstructionPros.com/11172723

Wacker Neuson Offers Full Range of Ride-on Trowels Wacker Neuson offers a full range of ride-on trowels that meet the needs of small concrete contractors who are expanding their line to large professional flatwork finishers.

• The CRT line (Concrete Ride-on Trowel) starts with the CRT 36 models. These 6-foot (36inch) mechanical steer units offer a patented integrated wheel set.

• CRT 48 (48-inch) mechanical steer models are available with a torsional assist steering system that is easy to operate and reduces operator fatigue .

• The newest mechanical steer model is the CRT 48-33K DF model. This dual fuel model offers a gasoline/liquid propane (LPG) option in one machine, liquid-cooled gasoline, liquid-cooled gasoline/LPG dual fuel, and diesel • The CRT 48-PS models use a electronic steering system that combines hydraulics and electronics to create a true power steer unit.

ForConstructionPros.com/12002415

www.forconstructionpros.com/concrete | October/November 2016 | Concrete Contractor 19

CONC1016_19-23_Screeds.indd 19

10/11/16 1:51 PM

SCREEDS & TROWELS Atlas Copco Upgraded BG245 and BG375 Walk-behind Trowels

Bartell Morrison Inc. Mega-T Power Trowel

The 130-lb. BG245 and 185-lb. BG375 feature an adjustable clutch to enhance versatility, a centrifugal clutch for safe operations and a maintenance stand to make servicing easy.

• Centrifugal clutches disconnect the drive-train from the Honda or Vanguard gas engine as soon as the operator releases the grip.

• Quick pitch controls minimize setup times and enhance versatility.

• BG245 comes with 24-in.-long blades and features a rubber edger to prevent damaging walls or concrete.

• BG375 features 37-in.-long blades and a detachable throttle that can be moved from the left handle to the right.

ForConstructionPros.com/12148435

Available in a 46-in. variation, the Mega-T trowel is manufactured from heavy gauge steel and jig welded to ensure complete rigidity, strength and long life.

• Continuously Variable Transmission (CVT) with higher horsepower engine.

• High torque at both low and high speeds (25 to 180 rpm).

Speed Screed Cruiser / Speed Screed HEAVY DUTY

Lura Lightning Strike Concrete Screed The Lightning Strike Concrete Screed weighs less than 4.5 lbs. per foot, enabling easy transport and one-person setup.

• Composed of rugged, construction-grade aluminum.

• Screed sections available separately or as part of various packages.

• Clevis articulating, all-position handle.

• Gas or electric engines.

• Accessories available for specialized work.

ForConstructionPros.com/10086248

The Speed Screed Cruiser is designed for all types of finishing projects, while the Speed Screed Heavy Duty is designed for highproduction, low-slump paving operations.

• Variable width up to 75 ft.

• Reversible double-life aluminum finishing tubes.

Self-contained power source.

• Positive crown control.

• Lift handles for easy transport.

• Forward travel by either hand winches or hydraulic winches.

ForConstructionPros.com/12189180 •

Spin Screed The Spin Screed can be custom cut into lengths up to 22 ft., yet can be carried and loaded onto a truck by a single person.

• Complete 22-ft. unit weighs less than 100 lbs.

• Consists of an aluminum pipe powered by a heavy-duty right angle electric drill.

• Can be used on stiff, low-slump concrete of only 3 in. or on concrete with a higher slump.

• Leaves aggregate immediately below surface, producing a high-quality, durable finish.

ForConstructionPros.com/10084911

PT-36PP Power Trowel Pro-Pitch Toro reintroduced the Stone Construction Equipment line of walk-behind concrete power trowel machines, including the PT-36PP Power Trowel Pro-Pitch.

• Dyna-Clutch stops blade rotation without shutting off engine.

• 36-in. diameter.

• Lifting eye.

• Adjustable body-contoured handle absorbs vibration and is easily adjusted for the height of the operator.

ForConstructionPros.com/10898741

Smooth pitch control for fine pitching trowel blades.

• Precision-machined spider assembly for smooth finishing.

ForConstructionPros.com/12043798 •

HoverTrowel Pneumatic Models Weighing less than 45 lbs., the HoverTrowel is a patented power trowel designed for finishing polymer toppings.

• Interchangeable high and low pneumatic motors make it ideal for most of today's polymer toppings.

• A six-position telescoping handle.

• Coupled with interchangeable guards, creating 25” and 34” trowel paths make this trowel easy to maneuver in confined spaces and wide open areas.

• Can be used for most epoxy, cementitious urethane, polymer modified, EPDM rubber and many other hybrid toppings with a variety of blades and floats.

• Its design makes these pneumatic motors easily interchangeable with the company's four-cycle engine as well.

ForConstructionPros.com/12039894

20 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_19-23_Screeds.indd 20

10/11/16 1:51 PM

What is your reputation riding on?

If your equipment doesn’t hold up, neither will your reputation. That’s why professional contractors trust industry-leading Multiquip Whiteman® Trowels more than any other brand. Find out why you should too.

Get all the details. Scan with your smartphone*, visit multiquip.com or call 800.421.1244 today. * To download a code reader for your mobile device, visit mobile-barcodes.com

CONC1016_19-23_Screeds.indd 21

Like us on Facebook

© Multiquip Inc.

10/11/16 1:51 PM

SCREEDS & TROWELS Atlas Copco BV30 Vibrating Screed

LP Tools Power Pole Finisher The 34-in. Power Pole Finisher allows concrete finishers to start troweling 30 to 40 minutes sooner than if they were using a heavy machine by allowing them to stand outside the formed area.

• Use with up to four 6-ft. aluminum extension poles.

• Trowel weighs 24-lbs.

• Honda air-cooled 25cc, four-cycle engine meets EPA and California standards.

• Comes with a set of finish blades and a set of combination clip-on float blades.

ForConstructionPros.com/10079459

Allen HD7070 Magic Screed According to the company, the Allen Magic Screed was the first floating/wet screed on the market and is the #1 selling screed in the world.

It is light and has enough blade surface area to

The compact, single-beam vibrating screed allows contractors to level concrete in a variety of applications, including garage floors and driveways as well as in confined areas. The BV30’s interchangeable blades, lightweight aluminum body and rigid screed blade provide maximum versatility, easy handling and stability.

• The BV30 weighs as little as 28 lbs. and is available with five blade sizes, ranging from 6 to 14 feet long.

• The screed is equipped with a V-shaped, rigid bottom plate that prevents the blade from twisting to ensure stable and consistent leveling.

• Because the screed vibrates, it eliminates the need for pokers while leveling concrete as deep as 5 in.

• This single-beam vibrating screed offers a heightadjustable, foldable handle for easy operation and transportation.

• It can be maneuvered by one operator and includes features, such as an adjustable centrifugal force of the screed.

MBW Blitzscreed The Blitzscreed is a lightweight aluminum screed designed for flat, inverted or crowned applications up to 65 ft.

Unified vibration from one end of screed through the other.

• Section lengths include 8 ft. 4 in., 4 ft. 4 in. and 2 ft. 4 in.

• Diagonal truss/A-frame system for structural strength.

• Quick assembly and dis-assembly via flex couplings and turnbuckle design.

• Gas or air powered screeds available with manual or self-propelled winches (hydraulic available).

ForConstructionPros.com/12057874 •

MQ Whiteman Vibratory Screed The WS-HE Series vibratory truss screed features a modular design that delivers optimal results in flatwork or bridge deck applications.

• Sections available in 2-, 2.5-, 5-, 7.5and 10-ft. spans featuring all-steel truss construction and durable galvanized blades.

• Engine-driven models offer a choice of 9- or 11-hp Honda engines and manual or hydraulic winches.

• Powered option with manual winches well suited for low-slump concrete.

ForConstructionPros. com/12189440

Kraft Tool Magnesium Super Flat Paver’s Straightedge allow it to float in wet concrete. The adjustable handles and lifting bar make it extremely user friendly. In addition to the gas powered screed, an electric unit with a rechargeable battery is available for use in non-ventilated areas.

ForConstructionPros.com/12057778

The Super Flat Paver’s Straightedge is made for screeding and checking. Known as the “Bump Cutter” this tool produces a flat and even surface.

• Kraft’s Knucklehead II bracket allows the blade to be adjusted to fill and level uneven areas.

• Made of Genuine Extru-Lite Magnesium, which is 30% lighter than aluminum.

• Straightedge comes complete with braces, our 10’ button handle, and the roller bearing collar for easy adjustments.

ForConstructionPros.com/12189359

Jlin Multivibe MVPR100H

Somero S-940 Wet Screed

The 30-lb. Multivibe MVPR100H is powered by a 1.6-hp Honda engine with a 35cc displacement.

• Blade lengths up to 24 ft.

• Option for single or two handles.

• .6-qt. tank capacity.

ForConstructionPros. com/12189542

The S-940 laser screed machine has the ability to screed on chaired mesh, chaired rebar, heat tubes, some slab on deck and more.

• 10-ft. auger screed head or optional 9-ft. raking/fine grade head for raking concrete, finish grading or spreading material.

• Foldable elevation beam for narrower profile during transport or entry onto jobsites.

• Optional 3-D Profiler System and rotating head dollies.

ForConstructionPros.com/12189731

22 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_19-23_Screeds.indd 22

10/11/16 1:51 PM

THE WORLD’S # 1 SUPPLIER OF

BOOM EXTENSION CONCRETE SCREEDS

Outdoor Booth

There’s a new

2017

O32126

in town & you don’t want to miss it!

Ligchine International is pleased to introduce the most innovative, power house, laser guided screed ever offered in the industry. Like every ScreedSaver model, the BOSS 240 includes our standard features of Wireless remote control; Fully automatic operation; 2D laser control; 3D satellite control (optional); haul it with a pickup truck/trailer combination; FL numbers that can only be achieved by a boom operated screed, etc.

FEATURES: • Mega Screed Coverage – The BOSS 240 offers a massive 240 square feet of coverage per pass with an 18’ boom combined with a 13.5’ Superflat screed head.

• Engine – Kubota WG1605 (57hp) gas engine (or optional Kubota LP Gas engine).

• Zero turn drive system – Independently turn the upper boom frame OR lower drive frame 360o via hydraulic remote control.

• Stickup Avoidance – Instead of rotating the head in a wide circle, BOSS 240 is equipped with lateral boom/screed head side shift to avoid the obstacle.

• Concrete additive Sprayer – Standard on the BOSS 240 is a liquid additive spray bar on the screed head with an on-board tank and automatic ON/OFF activation.

• Pressure Washer – Standard on the BOSS 240 is a 2,000 psi pressure washer, water holding tank, & detachable 50’ braided hose.

• Lighting System – Bright LED lighting system provides high intensity front and rear lighting.

• Diagnostics – BOSS 240 includes a Parker 7” Color (touch screen) display with continuous hydraulic, electronic, power, and system status.

CALL: 812-903-4500 or WEB: www.ligchine.com

CONC1016_19-23_Screeds.indd 23

EMAIL: sales@ligchine.com Find Us!

10/11/16 1:51 PM

DECORATIVE CONCRETE Etching Stains from QUIKRETE

ColorChrome Pigment from Super-Krete

QUIKRETE Etching Stains transform plain concrete into a decorative, marblelike appearance with warm earth tones and unique shading.

It permanently stains concrete in one step and is ideal for interior rooms, patios, porches and driveways.

• Available in Tan, Coffee, Black, English Red, Olive.

• The stains cost approximately $45 per gallon bottle, or about .25 cents per square foot.

• One bottle provides 100 to 400 sq. ft. of coverage depending on the porosity of the concrete surface.

ForConstructionPros.com/12002901

ColorChrome Pigment is a metallic mica pigment designed to be dispersed in a variety of binders to create seamless floors with a unique, three-dimensional appearance. Depending on the application techniques used, the finished floor’s appearance can range from elegant to exotic.

• Ideal for retail establishments, night clubs, automotive showrooms, residential interiors and garage floors, or any interior that requires a truly unique finish.

• When combined with the proper binders and finish coats, it offers an unmatched blend of beauty and durability.

ForConstructionPros.com/12252384

Wearcoat 481HP Epoxy Topcoat from CFI Resists Yellowing

BonWay Expands It's Line of Decorative Concrete Products with BonTique Liquid Antiquing Agent The BonWay line of decorative concrete products has expanded its offering in 2016 with BonTique Liquid Antiquing Agent. This easy to use coloring agent is designed to function as a secondary color or highlight color for existing decorative stamped concrete.

• Mix one gallon of water with 6 oz. of BonTique Liquid Antiquing Agent.

• The mixture can be poured on or sprayed on existing stamped concrete. Then simply broom the surface for the best results and apply a sealer after the application.

• A one gallon bucket contains 3 lbs. of material, enough to antique between 2,000 to 3,000 square feet.

• It comes in six different color choices to create your unique look.

ForConstructionPros.com/12221770

Chromastain Waterbased Concrete Stain Chromastain is an environmentally friendly, water-based concrete stain product designed specifically for acrylic concrete overlay systems, in addition to concrete surfaces.

• Penetrates the concrete.

• Self-sealing.

• May be applied up to three times on the same area.

• Spray, roll or sponge application.

• Can be used to stain or color the surface of any porous substrate.

• Available in 1- and 5-gal. pails.

• Seven colors.

ForConstructionPros.com/10779319

Coatings for Industry has introduced an innovative new high performance floor topcoat that resists yellowing over the long term, solving a problem that has long plagued conventional epoxy coatings.

Ideal for settings subject to damaging sunlight, the new Wearcoat 481HP was formulated from inception to be both anti-yellowing and faderesistant. This new epoxy is designed as an upgrade from CFI’s long-proven Wearcoat 440 for applications where the floor has exposure to the sun or high intensity lighting. While all epoxies will eventually yellow, it will take twice the exposure for the 481HP to change noticeably while also improving wear resistance by 30 percent over conventional epoxy flooring. Developed as the go-to option for indoor/outdoor applications, extensive testing has demonstrated that it should prove ideal for garages, hangars, or other areas exposed to UV rays.

Wearcoat 481HP topcoat is especially effective in providing a seamless floor with good resistance to an array of hazards, even those encountered in aircraft hangars, or emergency and medical facilities.

• Ideal for application at facilities that are in-service because it has zero VOCs and extremely low odor.

• All of the decorative options including flakes, quartz and metallics available for Wearcoat 440 are also available for the new Wearcoat 481HP. ForConstructionPros.com/12215076 •

CityMix by Trinic CityMix is a patented lightweight concrete additive consisting of individual expanded polystyrene (EPS) waste particles encapsulated in an applied coating.

The product is static free, mixes easily and uniformly, and bonds extraordinarily well to cement paste.

CityMix by weight consists of approximately 50% EPS based inner core and 50% proprietary, nontoxic outer shell. By volume, CityMix consists of 99% recycled EPS particles with 1% outer coating.

ForConstructionPros.com/12258817

24 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_24-31_DecConc.indd 24

10/11/16 1:52 PM

PROMENADE & ROOF DECK WATERPROOFING SURFACE SYSTEM

Weatherwear roof deck system forms an elastic

latex membrane, with composite flashing that utilizes a “slip-sheet” to divorce the system from the surface and permits it to “float” over normal building cracks.

Weatherwear promenade

observation decks, etc.

It is available in a wide range

and roof deck covering is a

which are subject to normal

of colors and can be applied

monolithic system designed for

foot traffic, roof furniture

over plywood, concrete and

use as waterproof promenade

and rubber-tired window

existing promenade surfaces

decks and roof surfaces, such

washing rigs.

such as quarry tile, flagstone,

as sun decks, play roofs,

etc. after suitable surface preparation.

For more info on Weatherwear visit DEX-O-TEX.com email dexotex@cpcmail.net call (310) 886-9100 West Coast call (908) 245-2800 East Coast

CONC1016_24-31_DecConc.indd 25

10/11/16 1:52 PM

DECORATIVE CONCRETE NewLook TiqueWash The water-based and environmentally friendly TiqueWash antiques and restores weathered stamped concrete with ultra-fine polymers for improved surface penetration and a stronger bond.

• Concentrated powder can be mixed with clean water to achieve a translucent color wash.

• The product creates a multi-toned finish when it runs off high spots and settles in the low areas of relief or textured concrete.

• 16 earth tone colors.

• For indoor and outdoor use.

• Complies with all environmental regulations for all states and all applications.

• Available in 3-lb. containers.

ForConstructionPros.com/10937748

Dex-O-Tex Weatherwear Promenade and Roof Deck Waterproofing Surface System

New Cut Stone Edging for Concrete from Butterfield Color Innovative uses of concrete require equally innovative tools and processes. Butterfield Color has responded by developing a new 6-1/4 in. One Piece Cantilevered Step Liner.

This liner eliminates the need for complex forming to create a cantilevered step.

• In most cases the steps can be framed using standard 2' x 6' lumber.

• The liner has a 45-degree angle on the back which gives room to finish the step or slab below and thus the forms can be stripped the following day.

• Traditional step form liners are difficult to finish underneath and in some cases require stripping the form prior to final set of the concrete which can be very difficult.

• Also available in a 7-1/4 in.

ForConstructionPros.com/12263340

Weatherwear is the No. 1 choice by architects and has a broad range of decorative finishes available including many custom made looks and textures to satisfy the new age of architectural design. As a multi-layered trowel applied waterproofing and wearing surface, it is designed for use as a pedestrian traffic bearing and waterproofing system.

Suitable for use in many different applications including: sun decks, play roofs, observation decks, walkways, residential decks, commercial installations, and many more.

ForConstructionPros.com/12263343 •

MiraPrime Aqua-Blok XL MiraPrime Aqua-Blok XL is a clear, single component, odorless, water-based, penetrating colloidal silicate liquid primer that integrally waterproofs concrete, mortar and other cementitious structures.

• Deep penetration into concrete substrates 2 in. to 4 in.

• Water thin micro-crystalline technology penetrates fast.

• Purges/expels embedded chlorides and blocks re-entry.

• Enhances concrete physical properties maintains breathability.

• Significantly reduces migration of efflorescence.

• Application from positive or negative side.

• Significantly reduces moisture vapor emissivity.

• Hydrophilic moisture barrier - resists hydrostatic pressures.

• Permanent and self-healing integral waterproofing.

• Enhanced protection of reinforcing steel to corrosion.

• Meets USDA standards for non-incidental food contact.

• Non-toxic, low odor and environmentally safe.

• Cures, seals, densifies and hardens new/ existing concrete.

ForConstructionPros.com/12004332

Thermal-Chem 1604 Thermal-Chem is excited to announce a two new additions to their coatings line: 1064 DecoFinish Matte and 1065 DecoFinish Satin. Both are two-component aliphatic urethane coatings for use as a final wear topcoat.

• They provide chemical, corrosion, abrasion and stain resistance.

• DecoFinish Matte and DecoFinish Satin are a perfect polymeric top coat system for applications where the finish surface is exposed to high wear, abrasion, and ultra-violet light and a glossy finish is not desired.

• Both products cure to an extremely dense, molecular structure and a smooth, matte or stain finish • An aggregate can be incorporated into the topcoat to achieve the desired degree of slip resistance ForConstructionPros.com/12260626

26 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_24-31_DecConc.indd 26

10/11/16 1:52 PM

GFRC/RPC/ECC

Admix Trinic GFRC Admix Advantages

• M ulti component powdered admixture simplifies the production of GFRC, RPC, and ECC mixes • Proven through independent testing to eliminate the need for 7 day wet cure of GFRC products: outperforms control samples by over 500 PSI in flexural tests • Eliminates the overnight shipping costs in winter, foaming, separation and moldy product problems associated with liquid polymers

Hydration Stabilizer • Ready to use powdered initial set retarder • Makes more uniform and predictable HP/UHP concrete • Glass fiber reinforced concrete, ECC/SCC

11K Single Component GFRC Mix • Just add water and start spraying • High performance 11,000 PSI premix • Add fiber for a high performance back coat

Versa Color • Sub-micron nano-particle pigment base allows for true color perception • The highest UV stability available, for use on exterior or interior applications • Carrier options include, but not limited to, water, acetone, isopropyl alcohol, denatured alcohol, and Trinic LS Densifier

Trinic Plasticiser • Faster blending, easier wetting out of cementitious paste and color components • Increases compressive and flexural strength • Makes the production of high performance low water to cement ratios possible

Trinic Stage II Powder Accelerator/Hardener Advantages • Increases the early and ultimate strength of concrete with minimal effect on initial workability

Integral Color • Pure and intense colors and truest black • Almost 2,000 colors possible

• Offsets the retarding effects of high plasticiser dosages while reducing pozzolan strength lag

• Low doses save money

• Delivers excellent results in normal and cool conditions where very high next day strengths are required

Trinic Training

800-475-1975 CONC1016_24-31_DecConc.indd 27

FREE classes are provided each month for your success

www.trinic.us

info@trinic.us 10/11/16 1:52 PM

Looking for something?

Find it on the BUYERS GUIDE at ForConstructionPros.com

30,000+

Your online catalog for new & used construction products and service listings Browse companies and products by category View on any device … no app needed Easy access to equipment specs Request more information directly from manufacturers & dealers

BE A SMART NUT.

Visit the contractors’ #1 website.

CONC1016_24-31_DecConc.indd 28

10/11/16 1:52 PM

DECORATIVE CONCRETE Helix Architectural Color Hardener

Butterfield Color Table Top Molds

ChemSystems, Inc., a manufacturer of the Helix brand of decorative concrete colorants and admixtures introduces Helix Architectural Color Hardener, a dry shake surface color hardener containing reflective aggregate designed to produce an elegant and refined light exposed colored concrete surface. All-in-one product that combines the benefits of color hardener with specialty selected and graded reflective aggregates. Once applied, the surface is lightly exposed using Helix Surface Etch exposed aggregate surface retarder grade 01 or 03, or an acid wash using Surface Gel Tec HD24 gelled acid.

• Available in six standard colors with three different reflective aggregates (glass, mirror and carbide).

• Custom colors or aggregates are available upon request.

• Long range benefits include increased service life of the concrete, increased light reflectance, and increased coefficient of friction reducing slip issues.

ForConstructionPros.com/12008183

Butterfield Color is proud to announce new Table Top Molds, the latest addition to the company’s expanding line of decorative concrete urethane architectural precast molds. These molds were cast from natural cut trunk rounds of giant Douglas Fir trees harvested from the Inland Empire area of the Northwest. These molds were expertly cast to show amazing detail of growth rings, rays and inner and outer bark.

• Designed to be used as table tops, these molds come in two sizes: the 3 ft. round has a slice thickness of 2 in. and the 4 ft. round has a slice thickness if 2-½ in.

• The mold can be poured using standard concrete, Flat-Out Countertop Mix, or a variety of other high strength concrete mixes.

• Legs are not included.

ForConstructionPros.com/12116621

Kingdom Products’ Top Cap Kingdom Products’ Top Cap is a one-component, low-build overlay engineered to develop maximum strength and attain a tenacious bond to properly prepared, cured concrete without the use of a bonding agent. Broom-finish it, do a spraydown/knockdown, pigment, stain, stencil with it; give your worn, discolored concrete new life.

• Suitable for interior or exterior use.

• Formulated to withstand a harsh freeze-thaw.

• Can be applied with a trowel, squeegee or sprayed.

• Can be used to restore standard concrete or to create beautiful new design.

ForConstructionPros.com/12115299

HIGH-GLOSS

POLISHED CONCRETE WITH

MORE CLARITY USING THE TRU FLOORING SYSTEM ®

GRIND WET or DRY and POLISH IN 24 HOURS Visit us in the South Hall at Booth S10207 CTScement.com • 800.929.3030 www.forconstructionpros.com/concrete | October/November 2016 | Concrete Contractor 29

CONC1016_24-31_DecConc.indd 29

10/11/16 1:52 PM

DECORATIVE CONCRETE Dry-Shake Color Hardener & Release

Recycled Colored Glass Aggregate

Dry-Shake Color Hardener & Release is formulated for coloring and hardening new stamped concrete applications.

• Hardener is a blend of select grated aggregates, architectural cements, plasticizers and synthetic oxide pigment.

• Color Release releases stamping tools from concrete and provides a secondary accent color.

• When properly applied, system improves abrasion resistance.

• Both available in five packaged colors and five special order colors.

ForConstructionPros.com/10779360

The Recycled Colored Glass Aggregate has a multi-dimensional shape and permanent color not found in natural marble aggregates.

• Made from recycled bottles and window glass.

• Aggregate is colored completely through and not painted.

• Silver Coating option results in enhanced reflection.

• Available in sizes 0, 1, 2, 3 and 4-6 ForConstructionPros.com/10090773

Low-VOC Solid Sealer Stains The Solid Sealer Stains are now available in a lowVOC formula for customers in low-VOC states.

• Use to color old concrete for a fresh look, or match a new area to an existing area.

• 1- and 5-gal. pails.

• Ideal for driveways, patios, porches and pool decks.

ForConstructionPros.com/10756685

Sedona Acid Stain from The Stamp Store Concentrated acid stain line with 10 colors, including the conventional acid stain colors, the more fashionable brown tones and a vibrant blue.

• Normal dilution rate of one to one with water can be increased to as much 10 parts water for increased coverage and more precise color matching.

ForConstructionPros.com/10086001 •

Rhino EcoStain Rhino EcoStain provides surface protection and enhances the look and feel of decorative concrete floors. The product line consists of the Rhino EcoStain Base Coat - a bio-based, non-toxic and environmentally safe product for interior and exterior applications - and the Rhino EcoStain ClearCoats - a two-component, waterborne, polyurethane top coat system that magnifies the look of stained concrete while providing protection. These ClearCoats offer UV, chemical, abrasion and impact resistance.

ForConstructionPros.com/10081064

Expressions LTD Rock Edge Form The reusable, bendable Rock Edge Forms can be used for form a decorative edge on pools, countertops, bars, porches and more.

• Solid rubber allows user to screw the form in place.

• No additional backing forms needed.

• Bullnose and Slate edges also available.

ForConstructionPros.com/10895187

Get fast, relevant product information in the Buyers Guide at ForConstructionPros.com

Brickform E-Stain Blend of water and mineral compounds that react with substances already present in concrete or cementitious overlays.

• “Etches” color into surface.

• Permanent, insoluble color effects that resemble marble or natural stone.

• Available in 8 standard colors.

ForConstructionPros.com/10082160 •

30 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_24-31_DecConc.indd 30

10/11/16 1:52 PM

Floor Flatness an Issue?

LEVEL it with DRYTEK. ®

DRYTEK Self-leveling Underlayment ®

Pourable and pumpable Topically stained or integrally colored n Fast cure and quick drying n Polishable wear surface topping n n

Snap for more information.

www.drytek.com

l

1.800.243.4788

A-8069-0916 ©2016 LATICRETE International, Inc. All trademarks shown are the intellectual properties of their respective owners.

CONC1016_24-31_DecConc.indd 31

10/11/16 1:52 PM

POLISHING PRODUCTS CreteClean Plus – Single Dose CreteClean Plus – Single Dose conditions and enhances regular, densified and densified-polished concrete floors with just one bottle in one tank*.

According to the company, the superior cleaning technology removes contaminants, leaves behind no residue, and nourishes the floor with our proprietary additive, “Scar Guard.”

• Coverage rate: 500 sq. ft./gal. (15,000 sq. ft./20-30 gal. tank).

• Available in cases of 12 bottles or master cases of 48 bottles.

• Suitable for use in food handling establishments.

• Contact Curecrete Distribution, Inc. for a free sample. *Based on a 20-30 gal. tank of fresh water.

ForConstructionPros.com/12249397

The Refresher from Aztec Products General Equipment’s Pro Polish System Designed for use with popular models of singleand dual-head, low-speed surface grinders, General Equipment Company’s Pro Polish floor polishing system efficiently produces highquality polished surfaces without the need for expensive and complex equipment. Typical applications include concrete, marble and any other surface that can be polished.

The Pro Polish system utilizes a series of seven 10-inch diameter diamond-polishing pads. These pads are easily secured to the appropriate surface grinder using Velcro. The chemistry of the diamond pads is specially formulated to operate at the lower rotational speeds commonly found in surface grinding equipment, including General Equipment’s SG12 and SG24 Series surface grinders.

• Polishing pads range in composition from 50 to 3,000 grit and are color-coded to simplify the progression from one pad to the next.

• Users need only to follow the pad color sequence until the desired results are obtained.

• Simple operation caters to all types of users, from seasoned contractors to do-it-yourself homeowners.

• Hardeners can be combined with pads, usually 400 grit and higher, to help intensify the brilliance of the floor shine.

• When properly used to maximize service life, the system will polish up to 15,000 square feet of concrete.

ForConstructionPros.com/10082481

The Refresher, a propane polisher, stripper, buffer and sander features all steel construction and planetary drive to eliminate shadowing and side torque. It also includes three sets of quick changes heads for stripping, polishing and burnishing concrete.

• Standard 8 gallon water tank.

• Locking easy spin-on, spin-off heads for quick application change.

• 330 lbs. head pressure.

• Compatible for use with 4” ceramic or resin diamond pucks and diamond impregnated pads.

• Low profile – fits under 8” shelf.

ForConstructionPros.com/12135219

GelMaxx ECO-QUICKgel GelMaxx ECO-QUICKgel is a super absorbent powder that works quickly to turn concrete slurry, or any liquid waste, into a dry material that is safe to dispose in any standard trash can.

• Creates a hassle-free cleanup process.

• Can absorb up to 500 times its weight in liquid.

• EPA compliant.

• ECO-QUICKgel is able to treat wastewater for concrete grinding, polishing, cutting, coring, masonry, and more.

ForConstructionPros.com/11173620

HTC Launches DURATIQ HTC is now launching a totally newly-developed floor grinder: DURATIQ. The machine is available in two grinding widths, 600 and 800 millimeters. Some of the 100 new features incorporated into DURATIQ are: • Newly-designed digital control panel and remote control.

• New grinding head, hermetically sealed and dust proof for maximum reliability.

• Enhanced AirFlow technology and Mist Cooler System.

• Numerous smart features include GPS tracking, USB ports to download operating data, upload new software and charge personal equipment.

• Option to configure your DURATIQ entirely to your own needs.

ForConstructionPros.com/12254225

Metzger/McGuire's Edge-Pro 80 Edge-Pro 80 is Metzger/McGuire's newest addition to its line of semi-rigid concrete floor joint fillers. EdgePro 80 is a revolutionary new polyurea formula designed specifically to meet the challenges created by fast track construction schedules. The product is moisture tolerant and finishes flusher than most polyurea fillers used in stained and polished retail concrete floors today.

• Packaged in both 600 ml dual cartridge convenience kits and 10 gallon kits.

• Available in 13 standard colors.

• The product can be pre-tinted or can be tinted in the field through use of a ColorFast color pack.

ForConstructionPros.com/12252525

32 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_32-46_Polishing.indd 32

10/12/16 9:20 AM

KRazor EDGE Concrete Grinding and Polishing Edger The KRazor EDGE gives operators the ability to put a hand-held finish on any floor edge from a standing position.

• 3-hp, 220-volt, variable speed unit.

• Accepts 7-in. standard tooling.

• Six-position handle.

• T handle allows for ergonomic use from either side.

• Two non-marking casters offer 90° locking from four positions.

• Users can add extra weight to the 155-lb. machine.

• Attached EDGEKutter Shroud moves flush to the wall.

• Connects with Kut-Rite's KleanRite vacuums.

ForConstructionPros.com/10898729

Magna-Trap Grinders & Tooling from EDCO EDCO introduces Magna-Trap Systems, opening a new era in concrete grinding surface preparation equipment and tooling specifically designed for the rental industry. The combined capabilities of the 4 core Magna-Trap tools, (Dyma-Dots, DymaSegs, Dyma-PCD w/ Backing Segment, Strip-Serts) are designed to solve most surface preparation applications.

EDCO’s Magna-Trap System brings: • Same surface preparation tooling across EDCO Floor Grinders and Turbo Grinder product lines.

• 90% improvement in tooling changeover times compared to existing tooling systems.

• Increased application solutions through new tooling selections.

• Opportunity to increase return on investment by up to six-times over existing tooling systems and grinding machines.

ForConstructionPros.com/12140683

ShinePro from Superabrasive ShinePro, a simple but versatile system of diamond screens and pads that restore and maintain the floor shine. ShinePro works by mechanically cleaning and removing micro abrasions and delivers superior results on polished concrete, natural stone, VCT, terrazzo, overlays, etc.

• Works wet or dry.

• Offered in all popular sizes for use on any floor machine but you can greatly reduce your time on the job site with the new LAVINA B36G-S - a 36” propane “do-it-all” machine that can hone, polish, burnish and clean.

ForConstructionPros.com/12112982

UNLEASH VIBRANCE ®

®

Aggretex is the innovator in embedded aggregate material for concrete surfaces. Aggretex offers a line of concrete additives that are cementitious slurry matrix compositions, to which decorative aggregates are added to provide beautiful, cost effective, easy-to-place decorative surfaces. Our experienced team of concrete specialists skillfully blend sophisticated combinations of chemical admixtures, fibers, supplementary cements, aggregates and vibrant pigments to support our customer’s design innovations. The possibilities are limitless—UNLEASH VIBRANCE.

R E G I O N A L A N D N AT I O N A L D I S T R I B U T E R S WA N T E D CALL 877.519.5886 OR VISIT AGGRETEX.COM

www.forconstructionpros.com/concrete | October/November 2016 | Concrete Contractor 33

CONC1016_32-46_Polishing.indd 33

10/12/16 9:20 AM

Visit us on Facebook

EPOXY | METALLICS | NATURAL STONE | OVERLAY

The Seven Wonders of McKinnon Mat #1

Our innovative line of 100% solids Epoxy, Urethanes, and Acrylics, are engineered to perform above your expectations.

#2

Our Industrial Epoxy is chemical resistant, available in clear or pigmented, as well as, a Rapid Set formulation when set up and dry time are critical.

Aurora Epoxy

Industrial Epoxy

#5

Customized assistance in the design and planning stage, including product specification, system selection based on end use needs and conditions the surface will be subjected to, and prompt estimates (material and shipping) provided.

McKrete

Aurora Epoxy

CONC1016_32-46_Polishing.indd 34

Aurora Epoxy

From starting point to finish facet of our joint profession

10/12/16 9:20 AM

CONTACT US TODAY! www.mckinnonmaterials.com TOLL FREE: 1-866-622-7031

OVERLAY | POLYASPARTIC | URETHANES | SEALERS

Materials Concrete Resurfacing World #3

Aurora Epoxy is a new metallic epoxy that creates three dimensional effects as beautiful and mysterious as the northern lights.

#4

Epoxy Stone / River Rock

UV Resistant Epoxy securely bonds our natural stone in place, resists the harsh elements of Mother Nature (including those in frequent freeze-thaw regions of the country), ideal for exterior or interior surfaces (including vehicle traffic).

LARGEST IN-STOCK EPOXY STONE SELECTION IN THE NATION!

Epoxy Stone / River Rock

#6

User-friendly materials, technical expertise, and rapid order fulfilment service. McKinnon will have your materials (up to 50,000 sq.ft. of Industrial Epoxy or 30,000 sq.ft of Stone Bond Epoxy) on the road to your location within 24 hrs. We invite you to check out our cost effective pricing, complimented by highly discounted LTL/Volume carrier rates that will boost your net profit margins.

#7

All materials are formulated “in house,” meeting the specifications outlined in our technical data and physical properties documents.

o finish line, we’ve got you covered... Keeping you on track through every ession, all the while assisting you in maintaining a profitable edge.

CONC1016_32-46_Polishing.indd 35

10/12/16 9:20 AM

POLISHING PRODUCTS PROSOCO Consolideck Blended Densifier A new product from PROSOCO’s Consolideck line of concrete flooring products gives applicators the combination of a powerful densifier with an easy-toachieve sheen.

Designed especially for steel-troweled or burnished concrete floors, Blended Densifier is a one-step solution that reacts with concrete to quickly create a harder, denser surface that can be burnished for a quick sheen.

• Safer and easier to apply than conventional sodium or potassium silicate hardeners.

• Blended Densifier requires no scrubbing or flushing, eliminating caustic wastewater.

• Deep-penetrating formula provides a quick sheen and better abrasion resistance than conventional hardeners.

ForConstructionPros.com/12263383

ARDEX PC COLOR-DYE Waterborne Dye for ARDEX PC-T Polished Concrete Topping Designed for use in the ARDEX Polished Concrete System (APCS). When applied to ARDEX PC-T Polished Concrete Topping, it will provide a unique coloring effect, ready for sealing • For use in interior applications only • Jobsite product samples are recommended • Available in Gold, Light Brown, Tan, Brown, Nutmeg, Dark Gray, Red Brown, Black ForConstructionPros.com/12006569

Terrco Propane-Powered Grinder The 2000-LP is a propane-powered concrete floor grinder/ polisher that allows contractors to work without an electrical power source.

• 22.5-inch disc sweep.

• Optimal for jobs exceeding 5,000 square feet.

• Four opposite-rotating heads will perform concrete polishing at 2,000 sq. ft. per polishing pad per hour, depending on grit, and take care of mastic removal at a rate of 800 sq. ft. per hour.

• Net weight of 865 lbs.

• 650 lbs. of abrasive pressure.

• 20-gal. water tank.

ForConstructionPros.com/10258909

LATICRETE L&M LION HARD LION HARD is a low VOC, environmentally friendly lithium silicate concrete floor densifier, hardener and sealer. This product penetrates bare concrete surfaces and transforms them into permanently dust free floors that get better with age This dust-proof performance is perfect for high traffic concrete floors in any situation ranging from heavy industrial settings such as warehouses, factories and schools, to small residential and commercial settings.

• No scrubbing or washing necessary • May be applied to new and existing cured concrete • Very effective on polished concrete surfaces to harden, densify and protect their attractive and durable finish ForConstructionPros.com/12263394

Revive-Maxx Diamond Floor Polishing Pads Jon-Don has added Revive-Maxx Floor Polishing Pads to its extensive line of concrete polishing supplies and accessories. ReviveMaxx polishing pads are impregnated with FERRZON, the only substance capable of scratching a diamond. The pads will remove light etch marks from daily usage and recover a floor’s lost gloss to restore that “good as new” shine.

Dickson DG-10-115 Concrete Grinder/Polisher The DG-10-115 concrete grinder/polisher is built for constant commercial and rental markets.

• Narrow enough to fit through a standard 36" door.

• Ideal for grinding/polishing residential kitchens, bathrooms, and utility rooms.

• 115 VAC or 230 VAC single phase.

• Fully adjustable handle bars fold down for easy loading in pickups, SUV, and even station wagons.

ForConstructionPros.com/12028649

Can be used wet (water only) or dry under auto scrubbers, ultra-high-speed burnishers, swing machines, or low-speed floor buffers.

• Use on multiple types of floors, including terrazzo, marble, soft stones, and concrete.

• Available in multiple sizes and grit levels.

• Each color-coded Revive-Maxx pad is 20 mm thick.

ForConstructionPros.com/11449398 •

36 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_32-46_Polishing.indd 36

10/12/16 9:20 AM

UPGRADE to

SELF-PROPELLED L25LM-X O NLY $16,490.00

• • • • •

SELF-PROPELLED drive!

(NO REMOTE CONTROL) Higher productivity; No impact on the operator - no pushing, just set the machine path; Grind and polish at a constant speed & consistent scratch pattern; Forward and reverse options;

Model L25LM-X: 25” work path 3 x 9” heads 15 hp motor 3 phase, 220 V or 480 V 500 lbs grind. pressure Chain Driven Forced Planetary

Model L32M-X-HV: 32” work path 6 x 9” heads 25 hp motor 3 phase, 480 V 1000 lbs grind. pressure Chain Driven Forced Planetary

www.superabrasive.com

CONC1016_32-46_Polishing.indd 37

10/12/16 9:20 AM

POLISHING PRODUCTS Blue Star Diamond Premium 4 Segment Diamond for Hard Concrete Blue Star Diamond by BORIDE Engineered Abrasives introduces the Premium 4 Segment, a diamond specially designed to cut through the cream of very hard concrete. The unique design allows the diamond to penetrate deep into the cream, opening up the floor and allowing the diamond to keep cutting when most metal bond diamonds fail.

• Available in 30/40, 60/80 and 120/140 grits, with Velcro and with Velcro and boss.

• Run wet or dry on most small, medium and large planetary and rotary machines.

ForConstructionPros.com/11272625

StarSeal PS Ultra Stain Vexcon's StarSeal PS Ultra Stain for densified and polished concrete will penetrate and color any interior or exterior new or old concrete surface prior to being ground and polished, densified or sealed.

• Non-flammable, low odor.

• Non-fading and UV resistant color.

ForConstructionPros.com/11280610

Increte System's Level Top SP Increte System's Level Top SP by Euclid Chemical is an easy-to-use single component self-leveling surfacing compound for application on new, dull, or worn interior concrete.

• Provides a surface that is especially resistant to the penetration of moisture.

• Level Top SP may be integrally colored, stained, or polished.

ForConstructionPros.com/12054974

Concria TrowelPolish

Synpro Pre-Grind

Concria TrowelPolish is a six-step system which allows users to transform an ordinary power trowel into a concrete grinding and polishing machine.

• Add a new revenue stream to your business without investing in expensive grinding and polishing machinery.

• Polish up to 10,000 sq. ft. of concrete per day with one ride-on power trowel.

• Ideal for large industrial and commercial floors where traditional grinding is too expensive.

• Can be used to achieve a fully polished floor, or to simply even out the appearance of the surface.

ForConstructionPros.com/12039535

Synpro Pre-Grind is the first synthetic acid, concentrated Pre-Grind solution for the concrete polishing professional. Synpro PreGrind reduces concrete surface tension and conditions concrete for polishing.

• Clean and etch concrete surfaces.

• Removes oil, grease, soot and dirt from concrete surface in one application.

• Requires no neutralizing.

• Allows the polishing professional to use a higher grit diamond on the first cut, reducing time and labor cost in addition to less wear and tear on the equipment.

• Biodegradable, non-hazardous and nonD.O.T regulated.

• Contains no VOC’s.

• Ideal for both interior and exterior applications.

ForConstructionPros.com/12028662

T Meter The T Meter is the industry’s first measurement device for reading concrete surface texture.

• Reads concrete texture in three parameters: STG – Surface Texture Grade as described in CSDA Standard ST-115, Ra – Roughness Average, and CSP – Concrete Surface Profile 1-6 as defined parameters of ICRI CSP profiles.

• Mobile design.

ForConstructionPros.com/11230650

Get fast, relevant product information in the Buyers Guide at ForConstructionPros.com

38 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_32-46_Polishing.indd 38

10/12/16 9:20 AM

Scanmaskin Scancombiflex 800DSP The concrete floor grinding and equipment manufacturer, Scanmaskin, has decided to make life easier for the contractors by developing the new Scancombiflex 800DSP. Scanmaskin is launching a new type of SMART floor grinding and polishing machine which the manufacturer considers being a complete innovation for the industry.

• Scancombiflex 800DSP is the optimal helper, guiding you through the whole process.

• A new integrated computer gives accurate guidance to the operator through the control panel.

• Through sensors the operator receives feedback and warning when the tool wear is too high or when the tool is worn out.

• The sensors continuously measures the wear or thickness of the tool.

• With the manual mode, the operator can choose the speed and the tools.

ForConstructionPros.com/12045795

Duraamen Param 6000 Param 6000 is a polishable self-leveling concrete topping used for creating highly durable designer concrete flooring for residential and commercial spaces. It is available in grey and white base which can integrally colored with Colorfast colors or sprayed with DESO dyes. The polishing process also includes application of colloidal silica based concrete densifier, Hermetix densifier and subsequently protected with Hermetix protector.

ForConstructionPros.com/12056969

CS Unitec’s EBS 125.5 D Grinder CS Unitec’s EBS 125.5 D grinder includes a rugged 14.5 amp motor. The front of the guard on the EBS 125.5 D is removable to allow the cup wheel to grind against the wall while keeping a tight seal for complete dust extraction, making it the perfect tool for edge grinding.

• Built-in vacuum port for dust-free operation when connected to an industrial vacuum.

• Load speed of 10,000 RPM. • Designed with handles on both sides of the motor to ensure the operator applies equal pressure on the tool, preventing the cup wheel from digging in and providing a smoother surface. This “H” design differs from traditional right angle grinders and allows the worker to finish larger areas with less fatigue.

• Assorted diamond grinding wheels for concrete, epoxy and masonry material are available.

• An optional walk-behind cart converts the EBS 125.5 D from a hand-held grinder to a walk-behind grinder to eliminate kneeling or bending.

ForConstructionPros.com/12096513

www.forconstructionpros.com/concrete | October/November 2016 | Concrete Contractor 39

CONC1016_32-46_Polishing.indd 39

10/12/16 9:20 AM

POLISHING PRODUCTS The Speedi Edge from Niagara Machine The Diamapro Systems Speedi Edge makes using a hand grinder or polisher easy. Its ergonomic design takes strain off of the operator allowing for longer work times, and prevents the machine from tilting and gouging floors. It is available in three sizes and is compatible with every grinder. Simply attach your grinder to the Speedi Edge using the two supplied bolts and you are ready to go.

• Speedi Edge Mini fits Metabo 5” grinder and others.

• Speedi Edge Standard fits Metabo Polisher and others.

• Speedi Edge Max fits Metabo 7” grinder and others.

ForConstructionPros.com/12126931

Polish Off Your Concrete Flooring Projects with INDUROSHINE by W. R. MEADOWS INDUROSHINE, a polished concrete flooring system by W. R. MEADOWS, is an environmentally friendly and long-lasting choice for your polished concrete flooring needs. The INDUROSHINE system, when combined with W. R. MEADOWS’ LIQUI-HARD, a concrete densifier and chemical hardener, creates an architectural and aesthetically pleasing floor that requires neither expensive coverings/ coatings nor frequent maintenance.

ForConstructionPros.com/12127932

SpecGuard High Gloss Concrete Protectant/Polish SpecGuard contains water-based polymeric protectant that improves the appearance and durability of concrete floors. SpecGuard incorporates a cross-linking nano-technology which aids penetration and adhesion creating a tough, stain-resistant coating. The product also contains UV absorbers that enable it to protect colored or dyed concrete against UV degradation. It can be used alone or in combination with reactive sealer such as SpecHard or LithSeal SC to give concrete floors a glossy finish, harder surface, and protective chemically resistant seal.

• Provides 24-hour stain protection to the most common stain-causing agents.

• Treated floors exhibit instant gloss and long lasting scuff, scratch and stain protection.

• Protects colored or dyed concrete from UV degradation.

• High solids concentrated formula (dilutes up to 1:1 with water).

• Durable/breathable.

ForConstructionPros.com/12134010

40 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_32-46_Polishing.indd 40

10/12/16 9:20 AM

Why do people choose the L&M FGS PERMASHINE polished concrete system? ™

®

Snap the QR code to download the Polished Concrete and LEED v 4.0 Certification whitepaper.

Installers and owners choose L&M™ FGS PERMASHINE because the system offers them: ®

n n n n n n

Credibility and trust built over a decade Exceptional product performance and national spec listings “High traction” certification by the National Floor Safety Institute Dedicated, long-term support of the polished concrete industry LEED Green points Architectural customization and colors ®

Talk with a LATICRETE technical service rep about your next polished concrete project. Visit www.lmcc.com or call 1.203.393.0010 today.

www.lmcc.com

A -8070-0916 ©2016 LATICRETE International, Inc. All trademarks shown are the intellectual properties of their respective owners.

CONC1016_32-46_Polishing.indd 41

10/12/16 9:20 AM

POLISHING PRODUCTS

SOLID STRONG CONCRETE

PRODIACC Pads from Wagman PRODIACC pads are specifically engineered for use with the patented Wagman Revolution GHP System on power trowels.

• The pads are a polyreinforced orbital diamond cushion composite.

• High performance design promotes long wear life and efficiency of the diamonds.

• Productivity increases dramatically over traditional methods due to the “passive planetary” action of the patented Wagman Revolution Rotary System.

• Composite pad simplifies the process of grinding, honing, and polishing concrete, reduces maintenance labor with fewer pad changes with no loose or broken pucks to fix.

• Multiple diamond matrix per pad allows for fast grit level changes, thus reducing labor costs even more.

• PRODIACC pads complement the Wagman Revolution Rotary System.

ForConstructionPros.com/12151608

EDCO’s Scarifiers clean, texture, level, groove and remove. Scarifiers are versatile milling machines that stand up to any required removal and prep work.

• Variable depth settings for greater control of surface removal • Easy loading drums allows set-up in minutes • Vacuum Ports for dust-free milling Water options also available NOTE: EDCO’s unique engage/ disengage lever raises and lowers the cutting drums without losing the depth setting.

Electric and gasoline powered machines available.

CPM-8 8” WALK BEHIND SCARIFIER

edcoinc.com

Concrete Polishing Solutions G-320D and G-320D PRO Grinders With more than seven years in production, the G-320D and G-320D PRO set the standard in polished concrete equipment. With powerful motors, upgraded slip-clutches, and flex head technology, these machines not only have more than enough torque to grind through heavy mastics and coatings, but also make excellent polishing machines.

ForConstructionPros. com/12152035

Ameripolish PCA - Penetrating Curing Agent Ameripolish PCA is a highly penetrating, non-film forming curing agent that drastically reduces map cracking (crazing), greatly improves abrasion resistance and minimizes efflorescence and dust for healthier indoor air quality.

• PCA replaces traditional cure and seal products.

• No need to use harsh chemicals or aggressive metal bond abrasives to remove it.

• Helps with uniformity and aesthetics of the concrete floor with grinding and/or polishing applications.

ForConstructionPros.com/12152109

42 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_32-46_Polishing.indd 42

10/12/16 9:20 AM

BORN TO SET NEW STANDARDS. We decided to create an entirely new generation of floor grinders.

The result is the DURATIQ. Two machines completely redesigned, each with more than 100 new features, solutions and details matching the clearly set requirements and expectations of professional users and specialists the world over.

Experience a new era in floor grinding.

>

100

NEW FEATURES

CONC1016_32-46_Polishing.indd 43

TWO SIZES. 28 CONFIGURATIONS. ENDLESS POSSIBILITIES.

10/12/16 9:20 AM

POLISHING PRODUCTS SASE PDG 9500 Plus 36” Planetary Diamond Grinder

Finally! Polished concrete repair that looks like polished concrete...

Add sand and polishing dust for a matching effect.

Decorative Concrete Repair Polyurethane Introducing MatchCrete™ Clear! Concrete repair that goes down clear, stays clear and can match and blend with most any decorative concrete surface or exposed aggregate. Any Depth • Any Width • Sets in Minutes • Grind or Polish • Indoors or Out • Sand filled or Neat For a FREE 800-522-7623 demonstration from a participating local distributor or more information on these and other high-performance repair solutions call: 1-800-522-7623

www.roadware.us 381 Bridgepoint Way South St. Paul, MN 55075 1-651-457-6122

www.facebook.com/polishedconcreteuniversity Continental breakfast & fully catered lunch will be provided throughout this 5 day course.

GET CERTIFIED! Be sure to come to our Polished Concrete University 5 day hands on training course! We will be teaching procedures such as floor polishing, overlayments, epoxies, grind & seal, logo applications, color techniques, micro-toppings, concrete cutting, densifying, dyes & stains, advertsing and much more.

At the end of this training course you will be certified.

Don't wait, register today!

9:00 AM - 6:00 PM

2200 NW 32nd Street #1100, Pompano Beach, FL 33069

OCTOBER 10TH-14TH

NOVEMBER 7TH-11TH

DECEMBER 12TH-16TH

www.polishedconcreteuniversity.com

(855) 890-7880 | info@polishedconcreteuniversity.com

The PDG 9500 Plus Planetary Diamond Grinder features a 36” gridning width. A low profile expanded grinding head allows the contractor to grind under toe kicks and retail store shelving. A removable shroud allows it to be converted back to a standard 32” grinder.

• The unit ships with three interchangeable standard 11” QCS plates and three 17” QCS plates.

• 36” width cut is for light grinding and polishing only and not for heavy stock removal.

• For heavy stock removal, convert the machine to a 32” grinding width.

• Build for low maintenance.

• Connects to SASE BULL 1250 dust extractor for dust-free operation.

ForConstructionPros. com/12152092

Substrate Technology Inc. 2807 The STI-2807 is designed for small to medium-sized commercial projects and residential garage finishing. This machine is the smallest of the P/M machine range, but still produces perfect results in grinding or polishing.

• 7.5 hp motor is built to last.

• Variable speed drive easily adapts to different grinding or polishing conditions for concrete, terrazzo, marble, and stone applications.

• Available in 230V or 480V, as well as propane models.

• Uses two tool plates (included).

ForConstructionPros. com/12152105

“No Stink” Primer for Concrete Overlays from AC•Tech The AC•Tech RMSEnviro Primer is a single-coat epoxy resin that seals porous substrates to reduce “pin-holes” and bubbles, control moisture drive, increase adhesion, and minimize cracking in the finished installation. This two-part epoxy resin was specifically engineered with the health and safety of flooring contractors and building occupants in mind.

• Engineered for lighter duty or price-sensitive projects where only a primer is needed.

• Readily accepts sand broadcast to provide the strong mechanical bond that polished concrete overlays, cementitious underlayments and other breathable wear toppings require.

• Spreads fast and uniformly.

• No odor or VOC emissions.

ForConstructionPros.com/12169508

44 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_32-46_Polishing.indd 44

10/12/16 9:20 AM

Beautiful, Durable, Resinous Flooring

Snap for more information.

Engineered for long-term superior performance, SPARTACOTEÂŽ polyaspartic floor coating systems are designed to meet the needs of the most demanding heavy-traffic environments.

SPARTACOTE polyaspartic coating systems offer: n Seamless and impermeable coatings n Low VOC and low odor systems n Excellent abrasion resistance n Fast return to service n Non-slip textures

Resinous Flooring Systems

A product brand of LATICRETE International, Inc.

www.hpspartacote.com 866.966.1329

A-8071-0916 Š2016 LATICRETE International, Inc. All trademarks shown are the intellectual properties of their respective owners.

CONC1016_32-46_Polishing.indd 45

10/12/16 9:20 AM

POLISHING PRODUCTS PROSOCO Announces New Consolideck First Cut First Cut is a new product from PROSOCO’s Consolideck line that helps reduce scratches and increases the efficiency of diamonds when wet-grinding. The water-based preparation product also makes the wet-grinding process go faster and saves time on subsequent steps. Using a special blend of surfactants, First Cut pulls concrete slurry solids away from the surface and suspends them, preventing them from being reground into the floor.

• Increases efficiency and reduces time, labor and maintenance.

• Clears the path for the diamonds to more efficiently remove the concrete surface.

ForConstructionPros.com/12263373

Husqvarna PG 680 RC - with Automated Oscillation Function

people per month GO NUTS over

ForConstructionPros.com.

Google Analytics January 2016

Shouldn’t you?

“BOLT OVER” to ForConstructionPros.com and see for yourself!

Visit the contractors’ #1 website for products, news, videos and business management.

Husqvarna presents a brand new remotecontrol floor grinder, the PG 680 RC with a unique automated oscillation function.

This allows the operator to mimic manual operation movements for higher efficiency and greater productivity and consistency on the job. At the same time, the PG 680 RC is flexible and fits through a standard door opening. Using a remote controlled grinder delivers increased productivity over manual grinders due to the fact the operator can correct hoses and power cord, move the dust collector, inspect the floor, and prepare the next set of tools - all while the machine is still running. The remote control unit can also optimize grinding parameters across multiple operators, resulting in more consistent operation and a better finished surface.

• Oscillation function - allows the operator to mimic manual operation movements. It creates the best possible grinding pattern by adjusting amplitude and frequency as well as a flatter floor by eliminating ridges.

• E-Track - allows the operator to set the machine to track in a straight line.

• Compact size - can easily move through a standard door opening.

• Increased productivity - higher output as optimum grinding parameters can be maintained over time. More grinding hours per day since one person can operate and prepare the next steps simultaneously.

• Parameter settings - enable consistent and better grinding performance.

• Ergonomic operation - operator is not exposed to vibrations and sideway forces of the machine.

• User friendly - intuitive display with two-way communication with machine.

• Transportation - effortless loading/ unloading with integrated battery.

• Dual Drive Technology.

ForConstructionPros.com/12186567

46 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_32-46_Polishing.indd 46

10/12/16 9:20 AM

SURFACE PREP & DUST EXTRACTION Mikasa MRH800GS WalkBehind Compactor The popular walk-behind MQ Mikasa MRH800GS has been redesigned to meet the needs of today’s construction professional.

• 5,300-lbs of compaction force.

• 3,300 vibrations per minute.

• Narrow profile designs allow for less than one inch side clearance for the 26.5-in. drums.

• The dual sprinkler controls wet each drum individualy.

• Operator has full control with infinite variable speed control while moving the equipment forward or in reverse.

• Updated handle for improved operator comfort and it folds up 90° for easy transportation and storage.

ForConstructionPros.com/12240866

T8600 Propane Dust Extractor

Rapid Roof Remover The Rapid Roof Remover from JKN Enterprises is a lightweight pneumatic tool that serves two very different markets for the rental industry. It's capable of removing multiple (up to five) layers of roofing with fasteners in a single pass and also efficiently removes flooring material.

• Variety of blades available; comes standard with toothed 30-in. blade.

• 18-in. toothed blade is available for removing roofing where excessive weight has caused sway between the trusses, or for flooring removal in restricted areas such as pantry or half bath.

• 4-in. beveled blade is available for removal of hardwood glued to concrete.

• Blade is adjustable to various roof pitches • Can be rented, along with a compressor, for roofing removal one day and flooring removal the next.

ForConstructionPros.com/12255943

Berry Clean from SpecChem A cost effective, natural raspberry scented, cleaner/degreaser concentrate. Berry Clean will effectively remove grease, grime, many types of carpet/tile cutback adhesives and other contaminants from architectural concrete and other surfaces. Berry Clean will also remove acrylic and resin concrete curing compounds from concrete surfaces.

ForConstructionPros.com/12258638

New Line of HPLM (High Performance Low Mass) Vacuums from Pulse-Bac Pulse-Bac has introduced another new concept to the world of dust collection with their new line of HPLM (High Performance Low Mass) vacuums. What is HPLM? Put simply, they're vacuums designed to have the highest power to weight ratio available. This new line of vacuums delivers very high suction while working on a light weight platform that is designed to be easily transported. The 3690, the first unit to be released in the line, delivers 690 CFM with 110" of H2O lift and weighs in at only 208 lbs., by comparison, that's about 70% lighter than most vacuums with similar suction power.

• Wireless remote start function lets you start the vacuum with a fob from up to 180 feet away.

• The 3690 is built on a larger version of the popular Revolution 360 bagger frame.

• Newly redesigned dump valve can be used from a standing position and automatically closes after used.

• Can use the Longo-Pac endless bagging system.

• The HPLM line uses the patented Pulse-Bac self-cleaning technology.

ForConstructionPros.com/12109625

Control dust on concrete grinding projects without electricity with the new T8600 Propane dust extractor.

• 18 hp Kawasaki motor with a directdriven turbine.

• 410 cfm and 115 in. of water lift.

• Individually tested and certified HEPA filters.

• Coated polyester pre-filter socks.

• Drop-down disposal system.

• Longo-Pac collection system.

• JetPulse filter cleaning.

ForConstructionPros.com/11142296

Jenny Products DirectDrive Cold Pressure Washers Four new models.

Powered by 9- or 13-hp Honda GX Series engines.

• Triplex ceramic plunger pump.

• Pressure ratings between 3,000 and 4,000 psi.

• Flow rates between 3 and 4 gpm.

• Thermal pump protection, unloader valve and high pressure relief valve.

ForConstructionPros. com/10080142 • •

www.forconstructionpros.com/concrete | October/November 2016 | Concrete Contractor 47

CONC1016_47-51_Surface.indd 47

10/11/16 1:55 PM

SURFACE PREP & DUST EXTRACTION SASE BULL 1250EBS Dust Collection System SASE Company Inc. introduces the BULL 1250EBS Dust Collection System now with the Elongated Bag System. The BULL 1250EBS can be used with the SASE PDG 8000, PDG 6000, and all other industry 32 inch diamond grinders.

• Elongated bags feature over 42 sq./ft. of filter area.

• Quiet -- only 78 dB. • Secondary HEPA Filtration.

• Manual filter shaker system is durable, dependable and easy to use.

• 8.5 hp regenerative motor.

• Include 50 ft. of 3 inch hose and 100 ft. of heavy duty power cord.

• Constructed of 14 gauge steel for longevity in industrial use.

• Weight: 500 lbs.

• Air flow: 388 CFM ForConstructionPros.com/12056920

UltraGreen Water Jet Reduces Emissions and Operating Costs In addition to reducing exhaust emissions, the advanced engine technology in UltraGreen units significantly improves fuel efficiency and increases torque, making it practical for pump units with smaller engines to handle bigger jobs.

• Annual operating costs for an UltraGreen unit can be $12,000 less than for a larger pump unit with a non-certified engine • NLB offers an UltraGreen package on many of its 30 convertible high-pressure pump units • Units are trailer-mounted for easy towing to job sites ForConstructionPros.com/12061029

Bosch Dust Extraction System The Bosch dust extraction system features a lineup of 9-gal. (VAC090S and VAC090A) and 14-gal. (VAC140S and VAC140A) vacuums.

• Two options of on-board filter cleaning: semi-automatic and automatic.

• Automatic filter self cleans the flat pleated filter through a reverse airflow every 15 seconds during operation without compromising suction or performance.

• Power tool activation feature with power broker minimizes blown circuits (power broker is only available in automatic filter cleaning models).

• Wet vacuuming water level sensor automatically shuts down device when water reaches a maximum height during wet applications.

• Rubber wheels and locking casters.

ForConstructionPros.com/11293161

The Original & Patented Self-Cleaning Vacuum!

Other Vacuums have been Sidelined.

But Not Pulse-Bac. Pulse-Bac Vacuums exceed the requirements of OSHA’s 2016 Silica Rule.

OSHA’s new Silica Standard requires vacuums have a “filter cleaning mechanism” and Pulse-Bac’s Automatic Pulse-Clean Technology is unmatched. It maintains suction by cleaning the filters for you, Automatically! No Compressor, No Shaker and No Button to Push.

But wait! OSHA RECOMMENDS a back pulse filter cleaning system. Once again, Pulse-Bac has your back! And we all know, what’s recommended today becomes a regulation tomorrow.

Pulse-Bac ahead of the curve for the past 15 years!

Plus all Pulse-Bac Vacuums come with FREE Lifetime Service & Support

www.pulsebac.com

9384 Ridgeview Tulsa,OK 74131 • 866-954-9700

48 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_47-51_Surface.indd 48

10/11/16 1:55 PM

CONC1016_47-51_Surface.indd 49

10/11/16 1:55 PM

SURFACE PREP & DUST EXTRACTION General Equipment Company’s SP8/GH9HP Surface Planer Providing high speed and accurate surface preparation, General Equipment Company is formally introducing its new SP8/ GH9HP surface planer which is ideal for a wide range of job applications, including milling misaligned sidewalks and joints, removing thermo and cold plastic markings and prepping floors for new coating applications.

• Powered by a 9.0-horsepower Honda GX270 4-stroke gasoline engine.

• Built with a unitized, welded steel plate frame, exclusive full length hexagon driveshaft and extra capacity ball bearings, to make this unit a workhorse.

• Maximum cutting depth of 5/8 inches, a cutting width of 8 inches and a cutting proximity to a vertical wall of 3-1/4 inches.

• Bearings are externally greased to extend the unit’s service life.

• Cutting depth is adjusted using a screw-type, positive-locking depth selector.

• The wheels located behind the drum make it easier to cut through high spots.

• Precise weight and balance enhance operator control and machine maneuverability.

• General Equipment also offers electric- and pneumatic-powered surface planer models.

ForConstructionPros.com/12224405

CS Unitec Handheld Pneumatic Scabbling Hammer The handheld, triple-head scabbling hammers reduce texture and roughen concrete, remove laitance and expose aggregate for application of sealants and coatings.

• Single-piece pistons yield 8,400 bpm.

• Integrated back handle grip.

• Consumes 16 cfm at 90 psi.

• Model 153.6051 uses Tungsten Carbide-tipped (TCT) bush hammer heads; great for leveling concrete and preparing concrete cracks prior to repair.

• Model 153.6050 uses TCT cruciform head to reduce concrete and remove paints and coatings.

ForConstructionPros.com/11295332

Husqvarna DC 3000 New in 2016 is the perfect companion for Husqvarna's PG 280, PG 400 or PG 450 grinders. The DC 3000 is a versatile, high-volume dust collector that is perfect for handling heavy duty dry/wet grinding applications. The automatic filter pulse vacuum includes all of the hoses and floor tools you would expect from a tool of this caliber.

• Automatic dust filter cleaning that prevents clogging while the vacuum is working.

• It is possible to run the machine at the same time the filter is being cleaned.

• The polyester filters are washable to facilitate easy maintenance.

• To facilitate disposal of debris, the top of the vacuum lifts off the container and the container is easily tilted to allow the debris to slide out.

• Comes standard with a Husqvarna multi-adaptor, wand, floor tool, integrated cart with dump function and 30' hose.

• Low noise - 73 db(A).

• Dry or wet vacuum cleaner.

ForConstructionPros.com/12185896

Makita Expands Line-up of Dust Extraction Solutions Makita has expanded its line-up of dust extraction solutions for concrete contractors with a new Dust Extraction Attachment, model 196571-4, for use with demolition hammers and rotary hammers (accepts SDS-MAX).

The new Dust Extraction Attachment is engineered to help reduce dust created from breaking and chipping concrete.

• 6-piece kit for use with a jobsite vacuum (sold separately).

• Compatible with Makita SDS-MAX Rotary Hammers and Demolition Hammers.

• The Dust Extraction Attachment kit and includes a dust cover, hose (62-1/2" long), hose holder for power cord, hose holder for "D" side handle, hose holder for straight side handle, and hose joint (1-7/8" ID, 2" OD).

ForConstructionPros.com/11364543

NLB Water Jet Lance The NCG24-535 water jet lances from NLB Corp. are rated for applications requiring operating pressures of up to 24,000 psi (1,656 bar) and designed to reduce the chance of hose or fitting failure.

The new lances reduce stress on the inlet connection by eliminating the bend radius in the hose that supplies high-pressure water. Instead, an inlet tube with a 90-degree bend and a safety shroud surrounds the hose where it attaches to the lance. The NCG24-535 water jet lance is also available in a dual-trigger version (NCG24-535DT) and an underwater version (NCG24-535UW).

The NCG24-535 features: • One-finger latch to prevent accidental actuation.

• Patented trigger that immediately dumps pressure when the operator pushes it forward.

• The lance weighs just 12 lbs. (5.5 kg) with its standard 36-inch barrel. Longer barrels are available.

ForConstructionPros.com/11447804

ARDEX EP 2000 Substrate Preparation Epoxy Primer Two-component, 100% solids epoxy resin primer formulated for use with ARDEX Underlayments and Toppings.

• Suited to prime concrete and other structurally sound and solid substrates • Install over: terrazzo, epoxy coatings and ceramic and quarry tile, prior to installing ARDEX products • Packaging: 10 lb. (4.5 kg) • Coverage: 150 to 200 sq. ft. (13.9 to 18.2 m2).

ForConstructionPros.com/12006556

50 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_47-51_Surface.indd 50

10/11/16 1:56 PM

CONC1016_47-51_Surface.indd 51

10/11/16 1:56 PM

SAWING & DRILLING OX Tools’ PU10 Diamond Blade The new OX PU10 cuts the most common materials found on a construction site. It cuts quickly due to its continuous rim design that features an edge that is serrated, giving the blade faster cutting speeds while maintaining a smooth cut.

• The reinforced center plate offers increased safety while the vibration dampening means quieter cuts.

• Available from 4” to 14”, these blades can cut granite, natural stone, clay products, engineering bricks, concrete products and metal.

ForConstructionPros.com/12234492

MK Diamond Products New SRX-150 Green Cut Early Entry Saw The compact, lightweight SRX-150 Green Cut Early Entry Saw is engineered for early entry sawing of crack control joints within one to two hours of concrete finishing.

• Powered by a Honda GX 160 Cyclone Air Filtration engine.

• The unit features a 6-3/8-in. blade capacity and provides a cutting depth of 1-1/8 in.

• Upcut blade rotation helps keep debris out of the joint, while the anti-spall skid plate aids in keeping the edge of the joint smooth.

• The blade guard features a 2-in. vacuum port for easy connection to dust control systems. The folding handle bar and retractable pointer arm make the saw compact for storage and the lifting point enables easy transport.

ForConstructionPros.com/12258752

Minnich A-1 Series Dowel Pin Drills The A-1 Series single-drill, on-grade dowel pin drills can be configured to drill horizontally, vertically, into a wall or 6 in. from a corner, eliminating the need for additional equipment or conversion kits.

• Includes models that can fit into 36- and 48-in. cutouts with their wheels on for easy repositioning.

• Models also available for 24- and 30-in. openings for jobs in even closer quarters.

• Feature built into the design helps ensure drills are shut off and retracted when not in use to prevent dry firing.

• Pistol-grip operator controls only allow the drill to function if held in the on/feed position.

ForConstructionPros.com/10959722

52 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_52-55_Sawing.indd 52

10/26/16 2:13 PM

Random cracking in concrete.

A straight, shallow contraction joint cut using the Soff-Cut method.

Excel

Vari-Cut™

FLX

DO YOU SOFF-CUT®?

ProEdge

Soff-Cut is not only the original way to minimize the risk of random cracking, but can also be used for decorative cutting. First, Ultra Early Entry™ control joints are dry cut during the Green Zone™ - the first hour or two after finishing - to eliminate random cracks. Then, once the concrete is fully cured, these cuts can be chased by a Soff-Cut 150 D and ProEdge beveled blade to create a decorative beveled look. The result is a more polished, professionally finished appearance.

Husqvarna offers the complete Soff-Cut system of equipment and diamond tooling, perfectly matched for aggregates throughout the country. It is important with the Soff-Cut method to change the skid plate with every blade, to ensure optimal cuts.

To learn more, visit www.husqvarnacp.com or call your Husqvarna representative today! facebook.com/husqvarnaconstruction

youtube.com/husqvarnaCP

HusqvarnaCP_Americas

Scan the code to see the full line and watch a video about Soff-Cutting.

Copyright © 2016 Husqvarna AB (publ.). All rights reserved. Husqvarna is a registered trademark of Husqvarna AB (publ.).

CONC1016_52-55_Sawing.indd 53

10/26/16 2:13 PM

SAWING & DRILLING CM75EBP 14” 75cc Gas Cut-Off Saw from Hitachi The CM75EBP 14” 75cc Gas Cut-Off Saw from Hitachi is designed with the professional in mind. Portable and easy to use, this handheld machine is designed for ultimate performance from its heavy-duty three-stage air filter to the standard water kit to on board tool storage. Other features include: • Decompression valve and one lever choke for easy cold starting.

• Tool-less adjustable guard and a metal guard, lower guard and foot plate for protection and durability.

ForConstructionPros.com/12260530

Announcing New Saws SRX-150 Green Cut Early Entry Saw Compact and lightweight, the SRX-150 dry cutting saw is engineered for early entry sawing of crack control joints within one to two hours of concrete finishing.

• “Upcut” blade rotation facilitates keeping debris out of the joint • Honda GX160 Cyclone Air Filtration engine • Triangular shaped arbor • Vacuum port for easy connection to dust control systems • Anti-spall, quick change skid plate included

Green Cut dry cutting diamond blades are laser welded and include a skid plate. There are five blade types to choose from based on the hardest of the aggregate in the concrete.

GC-10

GC-20 GC-30 GC-35 GC-55

CC-100 Crack Chasing Saw from MK Diamond Products MK Diamond Products announces the latest in their floor preparation category, the new CC-100 Crack Chasing Saw, designed to cut or widen cracks in asphalt or concrete surfaces for repair. The CC-100 is perfect for repairing floors, driveways, foundations and sidewalks.

The wet/dry V-segment crack chasing blades widen the cracks so they can be mended with fillers. The CC-100 is a highly maneuverable saw due to the use of an 8” diameter diamond blade that allows for a tight turning radius. The CC-100 can cut 6’ to 8’ per minute depending on material being cut. The maximum depth of cut is 1-1/8”. It can also be used for joint clean-out with the optional straight cut wheel kit accessory.

• Features two 2” vacuum ports for convenient connection to a dust collection system when dry cutting is desired.

• The depth control knob is easy to access for quick adjustments.

• Two engine options available, the Honda GX270 or Honda GX390.

• The MK-8000 series of V-segment crack chasing blades are designed for use with the CC-100.

• Blades are available in .250”, .375” and .500” widths.

ForConstructionPros.com/12258761

Detroit Industrial Tool 40th “Anniversary Blade”

CC-100 Crack Chasing Saw

Highly productive crack chasing saw for cutting concrete or asphalt.

Cuts 6’ to 8’ per minute depending on material being cut. 1-1/8” maximum cutting depth with 8” blade. Highly maneuverable - uses small diameter dry diamond blade allowing for tighter turning radius.

• Honda GX270 or Honda GX390 engine • Pivoting wheels for easy maneuverability • Vacuum ports for convenient connection to dust collector • Depth control knob for quick adjustments MK-8000 V-Segment Diamond Blades provide a perfect fit into cracks.

An American, family owned company since 1868.

1.800.421.5830 • mkdiamond.com © 2016 MK Diamond Products, Inc. All Rights Reserved. Images and specifications are subject to change without notice. Honda is a registered trademark not affiliated with MK Diamond Products, Inc.

MADE IN USA

Detroit Industrial Tool is a family owned and operated company celebrating 40 years as a leader in the Diamond Blade/Cutting Tool industry. To mark the 40 year milestone, the company has launched the “Anniversary Blade”, designed exclusively for Detroit Industrial Tool.

This limited edition is a multi-application blade, engineered for fast, aggressive cutting of concrete, rebar, and other materials. The patterned cooling holes and unique segment design make this blade an essential tool in your arsenal of equipment.

ForConstructionPros.com/12263990

54 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_52-55_Sawing.indd 54

10/26/16 2:13 PM

IMAGINE WHAT’S NEXT. Register today to get the ultimate view of where concrete is going.

Imagine viewing all the latest concrete applications. Imagine learning about sustainability advances. Imagine seeing what’s next from over 2,500 exhibitors spread out over 2,500,000 square feet.

Imagination becomes reality in Las Vegas on March 7–11, 2017— and if you make your reservation right now, you can ensure your spot at this huge event... and save!

Get the special $149 rate (and save up to $100) by registering early at www.conexpoconagg.com.

March 7–11, 2017 | Las Vegas Convention Center | Las Vegas, USA

CONC1016_52-55_Sawing.indd 55

IF IT’S NEW, IT’S HERE.

Co-located with

®

10/26/16 2:13 PM

REPAIR Thermal-Chem BarPatch 803

E-Z Pour Launch to Revolutionize Polyurea Joint Fill Market Solid Solution Products, a polyurea and urethane developer and equipment manufacturer for concrete joint fill and repair, announces E-Z Pour, a revolutionary method of filling concrete control joints. This new, patent pending, polyurea mixing and placing system is designed to fill the gap between traditional, cumbersome polyurea cartridges and high-end joint fill machines.

• E-Z Pour offers concrete contractors speed, easy mixing and placing.

• 24 standard colors with custom colors available.

• E-Z Pour is a more flexible, versatile, and lower cost method of filling concrete control joints.

• UV stable.

• Ideal for outdoor applications.

ForConstructionPros.com/12243554

Thermal-Chem BarPatch 803 is a two-component, epoxy system designed to repair damage to coated rebar. Specifically designed to repair epoxy coated rebar damage (“nicks and dings”) incurred during shipping, handling, and fabricating. It covers and adheres to the sheared (knife sharp) cut ends of epoxy coated steel rebar and provides touch-up repairs for epoxy coated mechanical splice couplers.

• Complies with all of the requirements of ASTM A775 (standard specification for epoxy coated steel rebar).

• Available in convenient, easy to use 1.5 quart, 1.5 gallon, and 3 gallon kits.

ForConstructionPros.com/12224230

Rapid Set V/O Repair Mix from CTS

MatchCrete Concrete Mender from Roadware Combines the 10 Minute Concrete Mender with the ability to add color in the field.

• Allows for a better color match with polished, dyed or stained concrete.

• Can be mixed with sand, dyes and powdered pigments.

• Repairs may be honed and polished in about 10 min.

ForConstructionPros.com/10079869 •

Damaged concrete in vertical and overhead locations can be dealt with quickly and easily using Rapid Set V/O Repair Mix. It bonds well with existing concrete and is freeze thaw and corrosion resistant.

• Apply V/O Repair Mix fulldepth with a single coat.

• Sets in 45 minutes and is ready for loading in 2 hours.

• Does not need to be wet cured in most applications, because of its cutting-edge self-curing technology (SCT).

• The mix is tinted gray to match most portland concrete surfaces.

• Can be used indoors or outdoors.

• One 50-lb bag yields approximately 0.41 cu. ft.

ForConstructionPros.com/12108405

Plaster-Weld and WeldCrete from Larsen

Rapid Flex CJ from SpecChem Rapid Flex CJ is a 100% solids, two component, UV resistant, semi-rigid, rapid curing, polyurea for filling control and construction joints in industrial concrete floors. Rapid Flex CJ allows for joints to be shaved quickly for fast turnaround.

• Designed for use in compliance with ACI 302, section 4.10 recommendations for joint fillers used in saw cut/control joints with a Shore A Durometer of 85.

• Can also be used for the repair of damaged or spalled joint nosing and cracks.

ForConstructionPros.com/12258796

Plaster-Weld is a high performance bonding agent that prepares any structurally sound surface to receive one-coat finish plaster and/or two and three coat plaster work. For interior use only.

Weld-Crete, the original plaster chemical concrete bonding agent, will bond new concrete, portland cement plaster, and cementitious mixes to structurally sound concrete floors, walls, columns, beams, steps and ramps. For exterior and interior use.

ForConstructionPros.com/12005155

QUIKRETE Form and Pour The QUIKRETE Companies expanded its extensive line of structural repair products with the introduction of QUIKRETE Form and Pour.

• Designed to make structural repairs to bridges, parking structures, tunnels, dams, walls and floors.

• A high-flow, high-strength, shrinkage-compensated concrete delivered through a pump system.

• A factory blended, micro silica enhanced formula of portland cement, aggregates and chemical admixtures, used in building or repair applications requiring a high-quality concrete with a maximum aggregate size of 3/8”.

• Appropriate for vertical and horizontal rehabilitation projects 1 ½” to 24”. ForConstructionPros.com/12168430

56 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_56-57_Repair.indd 56

10/11/16 1:54 PM

ARDEX K 22 F High Flow, Fiber Reinforced, Self-Leveling Underlayment ARDEX K 22 F High Flow, Fiber Reinforced, Self-Leveling Underlayment is a blend of high-strength gypsum, portland cements and powdered polymers used to repair existing above-grade floors prior to the installation of new floor coverings.

• Recommended for above-grade use over structurally sound concrete, gypsum, wood, well-bonded VCT, well-bonded patching, leveling or fill materials and properly prepared, non-water-soluble adhesive residue on concrete.

ForConstructionPros.com/12260559

Westcoat TC-29 Concrete Patch

Roadware 10 Minute Concrete Mender Roadware 10 Minute Concrete Mender penetrates deeply into concrete, making repairs from the inside out. With a surface tension one third of water, this two-part polyurethane may be needle injected into concrete cracks as small as one millimeter. Through a process Roadware calls, “Microdoweling,” the polyurethane drives itself into concrete surfaces and bonds concrete back together in 10 minutes at 70-degrees Fahrenheit.

• The repair will not get brittle over time and may be coated or polished within minutes.

• Roadware’s new needle tip mixers are available in three sizes from 0.8mm to 1.6mm.

• Perfect for repairing hairline cracks.

• Use on polished floors, decorative concrete, and retail showrooms or anyplace where aggressive cutting and preparation is not desired.

ForConstructionPros.com/12263565

Stick with

A specially formulated proprietary cement blend, TC-29 is used to patch and fill holes, spalls and minor cracks for interior concrete floors. TC-29 provides a quick drying, patching method for interior concrete floors and is designed specifically to be used with all Westcoat staining systems and most concrete polishing systems.

• Fast drying • Easy to use - just add water • High strength • Durable • Can be feathered • Concrete color • Accepts stain • Can be polished • Minimal shrinkage ForConstructionPros.com/12057164

Weld-Crete®—The pale blue bonding agent with over 60 years of superior performance in the field.

Simply brush, roll or spray Weld-Crete® on to concrete or any structurally sound surface. Then come back hours, days or a week later and finish with new concrete, stucco, tile, terrazzo, other cement mixes or portland cement plaster. Plus Weld-Crete’s® low VOC content significantly reduces airborne pollutants that affect health and the environment.

800.633.6668 www.larsenproducts.com

www.forconstructionpros.com/concrete | October/November 2016 | Concrete Contractor 57

CONC1016_56-57_Repair.indd 57

10/11/16 1:54 PM

TESTING & SOFTWARE Wagner Meters Introduces Moisture Test Kit

Con-Cure Introduces NEX Real-time Concrete Monitoring System The NEX wireless concrete temperature and maturity monitoring system allows you to instantly view the live, real-time status of concrete 24 hours a day from any Internet browser. This is accomplished using multiple small, reusable sensors embedded inside the concrete, with lead wires routed to the outside of the formwork. Cellular nodes send temperature data to the cloud in real-time, where it is processed into secure browserbased software. The nodes simultaneously record data onto an SD card as a backup.

Unlimited users can view the data at the same time from any location, enabling easy collaboration. The system will also send a text or email when the concrete has attained critical thresholds such as high or low temperatures, excessive temperature differentials or in-place strength.

ForConstructionPros.com/12257633

James Instruments Inc. Aggrameter T-T-100 The James Instruments Inc. Aggrameter T-T-100 utilizes the latest microwave and microprocessor technology to measure moisture content in various fine and coarsegrained materials.

The prongs of the probe are inserted into the material to be tested and the percentage of moisture content is instantaneously shown on the easy to read display. An average of five to ten readings is normally taken in order to ensure a valid result.

The moisture content is displayed directly as a percentage of dry weight.

• Comes calibrated for both sand and aggregate.

• Can be programmed by the user with up to ten different materials.

• It can store more than 150 readings— complete with time and date for future reference.

• Data can be recalled via USB interface.

ForConstructionPros.com/12230628

The WFP400 – Professional Flooring Installer Package from Wagner Meters’ Flooring Division provides everything you need for accurate moisture testing on concrete or wood floors, with relative readings available for other building materials.

The WFP400 – Professional Flooring Installer Package will include: • MMC220: Non-damaging moisture meter The Rapid RH Starter Kit includes: • The Rapid RH Easy Reader/5-pack Smart Sensor combo • Vacuum attachment, wire brush, drill bit, insertion tool • Rapid RH Datamaster with Bluetooth reader • Infrared (IR) thermometer, TH 200 thermo-hygrometer ForConstructionPros.com/11315745

Spectrum Talent Management HR Solution

Trimble R8s GNSS System with Field Link

Dexter + Chaney has partnered with BirdDogHR to create the full-suite Spectrum Talent Management solution providing users with everything they need to manage their entire employee lifecycle — from recruitment to retention.

• Powered by BirdDogHR’s complete line of human resources management tools.

• Delivered via cloud-based model.

• Completely configurable.

• Includes solutions for: recruiting, onboarding, performance, learning, collaboration and succession.

ForConstructionPros.com/12177237

Field Link layout software added to the R8S GNSS receiver allows contractors to take advantage of GNSS technology when performing layout, as-built assessments and quality assurance (QA) checks, while using software designed for building construction positioning work.

• Sub-centimeter horizontal positioning accuracy.

• Easy-to-use interface and workflows to locate and record layout points.

• Base Station plus Rover, Rover- or Base Station-only configuration options available.

ForConstructionPros.com/12176559

TEMP System Eases Compliance with Mass Concrete Pour Requirements The TEMP (Thermal Evaluation of Mass Pours) system makes it simple and cost efficient to meet requirements of thermal control plans and monitor concrete maturity.

TEMP measures concrete temperatures during curing in various locations of the pour using patented Thermal Wire cables, which feature custom-spaced digital temperature sensors. The cables are cast into the concrete, often tied to the reinforcement. The TEMP system is unique in making it possible to have multiple measuring points in a single Thermal Wire cable, allowing the design of each monitoring project with as few or as many temperature sensors per cable as required to minimize cost.

• A single external TEMP data logger collects and stores temperature measurements of all sensors of the Thermal Wire cable.

• No batteries in the sensors themselves, only in the external TEMP data logger and lasts 28 days, is rechargeable and is easily replaceable when low, making it possible to monitor and store temperature data indefinitely.

• Analysis and reporting is performed with the TEMP-S software, which makes it fast and intuitive to generate a customized presentation-quality report. It displays measured temperatures versus time in graphical and tabular forms, maximum and minimum temperatures, and the maximum temperature differentials, along with allowable limits entered by the user.

• TEMP-S calculates concrete maturity based on measured temperatures, and helps the user estimate concrete strength based on a user-determined strength-maturity relationship.

• Allows users to comply with maturity monitoring requirements of ASTM C1074 – 11 ForConstructionPros.com/12169212

58 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_58_Testing.indd 58

10/14/16 12:46 PM

WORKSITE PRODUCTS & EQUIPMENT Trimaco X•Board Surface Protection

Brokk 120 Diesel Demolition Robot

Trimaco‘s X•Board is a lightweight, but tough alternative for surface protection. It will last for the endurance of the job and features Spill Block liquid repellent technology.

Made from 100% recycled fibers, this item is eco-friendly and easy to work with.

• Protects new and existing concrete, wood, stone, tile, epoxy, vinyl composition tile (vct) and most other hard surfaces.

• X•Board is breathable and can be laid over curing floors.

• Available in 35"x50' and 35”x100’ rolls.

ForConstructionPros.com/12246703

The Brokk 120 Diesel is powered by a 24.8-hp (18.5 kW) Kubota D1105E4B Tier 4 diesel engine, designed to provide the same power, performance and hydraulic output as the electricpowered Brokk 100.

• It has a 661-lb. lifting capacity and can utilize attachments with up to a 353-lb. (160 kg) maximum weight.

• A 6-gal. fuel tank and efficient operation allow run times longer than eight hours before refueling.

• The 2,700-lb. unit can drive over weightrestricted floors and is easy to transport to and from sites.

• It measures 31 in. wide, 80 in. long and 49 in. high, enabling passage through any standard door opening.

ForConstructionPros.com/12166386

Fortec Stabilization Systems Introduces the Carbon Staple Anchor After recent research, it has been found that anchoring FRP on surface mounted applications greatly increases strength and performance.

Based on the company's initial testing, it is

Site Prep Laser Grading from Laser Force LLC The Grade Pride Laser Controlled Skid Steer Box is extremely versatile.

• Finish grade for concrete pads • Parking lots • Sports fields • Equestrian rings • Fits most any skid steer ForConstructionPros.com/12260512

reported the anchor with the patented peelply performed the best. Anchoring FRP also allows for fewer layers to achieve full strength of laminate to concrete structures. Installation is by far the fastest and easiest in FRP Anchoring.

ForConstructionPros.com/12261989

Curb Fox Adds Zero Clearance Sidewalk Paving to 5000-T The Curb Fox 5000-T Multipurpose Slipformer now paves zero clearance sidewalk sections from 4 feet wide up to 8 feet wide.

New heavy-duty tracks and added weight, enable the 5000-T mold to be rear mounted. So the machine frame is no wider than the sidewalk. Many existing sidewalk replacement jobs can only be slipformed by a zero/minimum clearance paver.

ForConstructionPros.com/12260528

Kubota SVL95-2s Compact Track Loader The SVL95-2s compact track loader features a 3,200-lb. rated operating capacity and 7,961-lb. bucket breakout force.

• Vertical lift delivers a reach of 40.7 in.

• Tier 4 Final turbocharged, liquid-cooled, fourcylinder diesel engine with a Common Rail System (CRS).

• Optional five-way adjustable high-flow hydraulics provides up to 40 gpm at 3,553 psi.

• 28.8-gal. fuel tank allows run time of a full 8 to 10 hour workday.

ForConstructionPros.com/12130887

MAKO Improves on Award-Winning Concrete Elevation Control Systems MAKO Enterprises has released the new and improved MAKO FinStand and Base Plate, increasing the versatility and strength of the products. The FinStand and Base Plate work together to create a stay-in-place form to use on wood or metal elevated decks or over vapor barrier, concrete overlay, sand or rock subgrade, sloped slabs, and abutments to name a few. Each support holds up to a 1,000 pound load.

• The new FinStand and Base Plate is made of an impact resistant material.

• The new design provides faster setup and has 1-3/4” of adjustability using a ½” x 13 threaded rod.

• The FinStand supports the MAKO FinCap pipe screed support as well as the new JAWS goal post screed support.

• It can be used with or without the Base Plate.

• The Base Plate now has a textured bottom which offers quicker adherence to construction materials and can be easily patched in tilt-up applications.

• Provide a non-penetrating support system for use on vapor barriers.

ForConstructionPros.com/12258714

www.forconstructionpros.com/concrete | October/November 2016 | Concrete Contractor 59

CONC1016_59-64_Worksite.indd 59

10/11/16 2:01 PM

WORKSITE PRODUCTS & EQUIPMENT W. R. MEADOWS Introduces New Water Repellent Penetrating Sealer, Pentreat 244-100 PENTREAT 244-100 is a penetrating, 100% active silane sealer that inhibits water and chloride ion penetration in concrete and masonry structures. It is a hydrophobic, impregnating sealer that helps prevent chloride-induced corrosion of rebar, scaling, spalling, freeze-thaw damage, and other causes of debilitating concrete.

• Designed for use on horizontal/vertical, new/existing concrete and masonry above-grade surfaces.

• Suitable applications include residential commercial, industrial, and municipal projects.

• Can be used on all types of concrete, including parking structures, driveways, plazas, patios, walkways, median barriers, bridge decks and piers, ramps, traffic barring concrete, marine structures, vehicular repair and wash down facilities, and loading docks.

ForConstructionPros.com/12260536

Lift-Safe Winches Lift-Safe hydraulic winches are engineered for enhanced safety with redundant braking systems.

• Utilize hydraulic fail-safe brakes and counterbalance valves to provide both static and dynamic braking.

• Provide optimum load control in lifting applications.

• Designed for increased operational flexibility.

• Available in a variety of configurations.

ForConstructionPros.com/10090382

Xo Hand-held Mixers Line The Xo line of hand-held concrete mixers offers an ergonomic design that allows users to stand upright when mixing concrete, mortar, plaster and grout.

• Xo 1 HF is a 1.4 hp model with a 10-gal. mixing capacity.

• Xo4 HF is a 1.7 hp model with a 17-gal. mixing capacity.

• Xo6 HF is a 2.1 hp model with a 24-gal. mixing capacity.

• Xo Duo model has counter-rotating stirrers and can mix 24 gal.

• Newly developed motors and gearboxes are specially aimed to handle the concrete jobsite.

• Choose from a variety of mixing paddles.

• Hexafix system allows users to change mixer paddle tool-free.

ForConstructionPros.com/10840686

60 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_59-64_Worksite.indd 60

10/11/16 2:01 PM

New Q-Max Pro Concrete Mix is the first and only concrete mix to deliver one-hour working time, three-hour walk-on time, and 6500 PSI compressive strength. With superior workability plus crack resistance, freeze-thaw durability, and corrosion resistance. Quikrete.com.

What america’s made Of. Ž

CONC1016_59-64_Worksite.indd 61

10/11/16 2:01 PM

WORKSITE PRODUCTS & EQUIPMENT MAPEI Introduces Mapeproof and Mapethene Below-Grade Waterproofing Systems MAPEI Corporation introduces its Below-Grade Waterproofing product line to the North American construction market.

• Mapeproof membranes are constructed using a layer of woven and nonwoven, puncture- and tear-resistant polypropylene fabrics. Encased with high-swelling, selfsealing sodium bentonite.

• Mapeproof membranes are offered in a standard-grade version (Mapeproof HW) and an alternate grade designed specifically for sites where contaminated or salt groundwater is present (Mapeproof SW).

• Mapethene membranes are constructed of a 4-mil-thick, impactresistant, cross-laminated, high-density polyethylene (HPDE) film laminated onto a proprietary 56-mil-thick rubberized-asphalt compound.

• Mapethene membranes are offered in both high-temperature (Mapethene HT) and low-temperature (Mapethene LT) variants.

• Mapedrain – A product group that includes seven three-dimensional drainage composites, each engineered for specific site drainage requirements.

• Mapebond – A product group that includes four contact adhesives, which meet the varied site conditions and the various VOC regulations.

ForConstructionPros.com/12177385

SPECIALTY WINCHES FOR THE CONSTRUCTION INDUSTRY

W I N C H E S

DESIGNED FOR OUTSTANDING

PERFORMANCE &

SAFETY

BLOOM MANUFACTURING, INC. Custom Engineered Solutions Since 1910

Independence, IA 50644, USA | bloommfg.com P: 319-827-1139 | 800-394-1139 F: 319-827-1140

MB-1600 Mud Buggy The MB-1600 Mud Buggy features a compact size and maneuverability to dump in tough to reach areas.

• Holds up to 16 cu. ft. of material.

• Travels up to 7 mph.

• Operator platform features an oversized brake pedal and dualaction dump pedal that returns the tub to hauling position, allowing the operator to keep hands on the operating bar.

ForConstructionPros.com/10878064

Lo Riser Inclining Platform Trailer The Lo Riser inclining platform trailer has a load carrying platform that can be hydraulically lowered to ground height with the flip of a switch.

• Minimum 4-degree load angle when lowered.

• 6,000-, 10,000-, 12,000-, 14,000- and 16,000-lb. payload capacity models available.

• Single and dual axle models.

• Bolt-on hitchball or optional pintle hitch.

• Four position hitch height adjustment.

• Built-in ramp for easy, drive-on loading and unloading.

• Options include on-board battery with charger and maintainer, spare tire and wheel with carrier, and cargo winch.

ForConstructionPros.com/10076834

Chicago Pneumatic CPLT V15 Light Tower The CPLT V15 light tower features a heavyduty polyethylene canopy designed to withstand extreme elements and working conditions.

• Kubota Tier 4 engine with a 28-gal. fuel tank for up to 50 hours of run time.

• Four 1,000-watt metal halide lamps offer visibility up to 7 acres.

• Wide wing doors allow 100% service access to the machine, including service components and drains.

• Includes heavy-duty stabilizers and a level indicator.

• Can be transported with the mast in the vertical position.

ForConstructionPros. com/12135569

62 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_59-64_Worksite.indd 62

10/11/16 2:01 PM

Rock Line Airtow MS10-55 Mini Skid Steer Trailer The 2,200-lb., ultra-compact MS10-55 Mini Skid steer trailer allows for ground-level loading and transport of mini skid steers and attachments.

• Non-tilting deck raises and lowers hydraulically in less than 20 seconds.

• Removable front platform and attachment mounts allow for easy mounting and removal of attachments.

• 120" x 57" deck and 5,500-lb. load capacity.

• Features eight heavy-duty D-rings, a 2 5/16-in. ball coupler, adjustable safety chains, lockable storage compartment, hydraulic motor/pump, 12-volt deep cycle battery, tow vehicle charging and LED flush rubber-mounted lights.

ForConstructionPros.com/12106475

LevMix Mobile Mixer

Atlas Copco RTEX Breakers Deliver Efficient, Groundbreaking Technology

Bobcat T595 Compact Track Loader The 8,055-lb. T595 vertical lift path compact track loader has a 2,200-lb. rated operating capacity (35% of tip load) and a 119-in. lift height to hinge pin. Its 74-hp Tier 4-compliant, transversely mounted, turbo diesel engine does not require a diesel particulate filter or diesel exhaust fluid. The standard machine shutdown protection system automatically shuts down the machine if needed to avoid catastrophic failure.

• The loader has a 7.1-mph maximum travel speed, or up to 10.4 mph with optional twospeed travel.

• It comes with standard controls (hands and feet) or optional Advanced Control System (ACS) and Selectable Joystick Controls (SJC).

• Non-hydraulic attachments can be changed from inside the cab via the Power Bob-Tach attachment mounting system.

• Auxiliary hydraulic flow is rated at 17.1 gpm.

ForConstructionPros.com/12233344

The 55-lb. RTEX pneumatic breaker has the breaking capacity of a 66-lb. breaker or greater and requires just 37 cfm to operate.

• Long piston design delivers a 100-millisecond interaction time between the tool and the surface for higher impact energy per blow.

• Soft start two-step trigger ensures full control over the chisel starting position and placement.

• Constant pressure chamber sits at the top and serves as an advanced pneumatic suspension, minimizing vibrations.

• Features vibration-reducing handles and the RTEX power chisel with concave tip that reduces jamming.

ForConstructionPros.com/12207029

Cat 300.9D VPS Mini Hydraulic Excavator Offers Options for Emissions-sensitive Operations The 13-net-hp 300.9D VPS (Versatile Power System) features a separate hydraulic power unit that allows it to work either with its diesel engine or from a remote electrical power source, with no loss of performance.

• Suitable to meet low noise and zero emission job requirements.

• 2,399-lb. operating weight.

• Delivers 1,012-lbf. stick force and 2,000-lbf. bucket force.

• Digging depth of 68 in. and max dump height of 80 in.

• 119-in. reach at ground level.

ForConstructionPros.com/12233535

The new LevMix unites three steps in one operation: • • •

mixing transporting pouring

The new LevMix mobile mixer combines the attributes "FAST and EASY".

Mix several bags in the shortest time.

www.collomixna.com

www.forconstructionpros.com/concrete | October/November 2016 | Concrete Contractor 63

CONC1016_59-64_Worksite.indd 63

10/11/16 2:01 PM

WORKSITE PRODUCTS & EQUIPMENT Concrete Mixer Attachment for Skid Steer Loaders from Western Material & Design, LLC Western Material & Design, LLC introduces the FasTrac Concrete Mixer. The FasTrac converts any skid steer loader into a portable concrete mixer. The model 750 has a threequarter cubic yard capacity, while the model 500 has a half cubic yard capacity.

• Use wherever fast-setting concrete is used.

• Used to transport concrete to places that ready mix trucks can’t reach.

• Contractors can pour on the left or right side, and the discharge chute extends up to six feet, providing more latitude when positioning the mixer.

• The pour gate seals to prevent water and material from escaping, and makes the unit ideal for self-leveling applications that involve a more fluid mix.

ForConstructionPros.com/12134275

Screen Machine 4043TR Recirculating Impact Crusher The 4043TR incorporates two patented technologies — the Crusher Relief System for the crusher lid and Smooth Start for the screen box. Built with all the rugged performance and durability of our standard 4043T, the 4043TR Recirculating Impact Crusher offers two additional functions: • A large two-deck screen, fed directly from the crusher, delivers sized product off the fines conveyor • An additional radial overs conveyor feeds directly back into the hopper, or can be positioned to the side for stockpiling.

ForConstructionPros.com/12261996

Rapid Trakmix Track Mounted Continuous Concrete Mixing Plant The Rapid Trakmix is a track mounted, totally mobile and self-contained, fully weighed high volume mixing plant. The machine has been specifically designed for applications where all types of binders or neutralizing powders are required in the mixing process, including road construction, road paving, ground works/civil engineering, environmental stabilization projects, aggregate recycling and many more.

• Up to 250 TPH output.

• Minimal site set-up.

• Ultimate mobile flexibility (remote controlled tracked unit).

• Self-contained with its own on-board genset (Tier 4 available).

• Superior controls system weighing all materials (patent pending).

• Compact design both in transport and set-up modes.

ForConstructionPros.com/12129965

DELIVERING SUSTAINABLE SOLUTIONS After water, concrete is one of the most sustainable and widely-used materials in the world.

Fly ash plays an important role in increasing the sustainability of concrete. Headwaters Resources is the nation’s leader in supplying quality fly ash. We can help you discover how to improve the performance of your concrete while simultaneously improving its environmental profile.

Visit www.flyash.com for answers to the most common questions about fly ash. You can also contact your expert Headwaters Resources technical support representative for advice on your specific sustainability opportunities.

www.flyash.com 64 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_59-64_Worksite.indd 64

10/11/16 2:01 PM

POWER TOOLS, HAND TOOLS & LEVELS The Pro Frame Roller from Nour Nour is proud to present the Pro Frame, a patented roller frame made of glass reinforced polypropylene. The Pro Frame roller offers contractors "A Better Way To Roll". The roller frame is specifically made to handle the rigors of floor and wall coatings and thus has the following features: • Made of glass reinforced polypropylene making roller extremely easy to clean and lightweight.

• Solvent resistant.

• Very strong (30% glass).

• No moving parts.

• Replaceable nylon end-cap system.

• Level pressure application.

ForConstructionPros.com/12176796

Milwaukee Introduces Industry’s First Cordless SDS Max Rotary Hammer The 5.5-lb. M18 FUEL 1-in. D-Handle cordless rotary hammer features an in-line design for extended overhead and downward drilling applications. It generates 2.1 ft.-lbs. of impact energy and 0 to 4,400 bpm. Its POWERSTATE brushless motor converts energy into power more efficiently, and contains no wearable parts which extends the life of the motor, reduces motor friction and cools more rapidly. REDLITHIUM XC5.0 batteries provide a full day of work on one charge, operate cooler and perform in climates below 0° F with fade-free power.

REDLINK PLUS Intelligence hardware and software integrates full-circle communication between tool, battery and charger to protect them from overloading, overheating and over-discharging. The kit also includes the M18/M12 multi charger, side handle, depth rod and carrying case.

ForConstructionPros.com/12244981

Bosch DDS183 18V EC Brushless Compact Tough 1/2" Drill/Driver and HDS183 18V EC Brushless Compact Tough 1/2" Hammer Drill The Bosch DDS183 18V EC Brushless Compact Tough 1/2 " Drill/Driver and HDS183 18V EC Brushless Compact Tough ½" Hammer Drill/Driver deliver all of the performance professional users expect in a go-anywhere design combined with bestin-class safety technology. Both the Bosch DDS183 drill/driver and HDS183 hammer drill/driver feature Bosch KickBack Control.

ForConstructionPros.com/12240442

Makita Expands 18V LXT Brushless Grinder Line-up Makita is meeting demand with another cordless metalworking solution, the new 18V LXT LithiumIon Brushless 4-1/2” Paddle Switch Cut-Off/ Angle Grinder with Electric Brake Kit, model XAG10M. In addition to the electric brake, which stops the grinding or cut-off wheel in two seconds or less upon release of the switch, the XAG10M includes electronic torque control, a large no lock-on flush-mount paddle switch with two stage lock-off, and an antirestart function.

ForConstructionPros.com/12245016

OX Tools Brings Bamboo to its New Masons Level OX Tools introduces their new Bamboo Masons Level.

The company added extruded aluminum bindings for protection and strength. This 48” level features two plumb vials and a level vial. The vials are constructed from solid block acrylic vials for increased accuracy over traditional curved vials • For added protection, OX has included shock-absorbing rubber end caps that can be easily replaced.

• For easy transport the level showcases two smooth and ergonomic hand holds.

ForConstructionPros.com/12258838

BackSaver Hammer Drill Attachment Save your back and get the job done. The patented concrete hammer drill attachment may change the way you use your hammer drill forever.

With the BackSaver contractors will be able to: • Stand and work to help prevent back injury.

• Drill concrete dowel bars more easily.

• Apply more pressure and use less energy.

• Increased productivity when drilling concrete.

ForConstructionPros. com/12126034

Dewalt 1-1/8” SDS Rotary Hammer The 6.8-lb., 1-1/8-in. SDS rotary hammer (D25263K) has an 8.5-amp motor that delivers 0-1,450 rpm and 0-5,350 bpm with 3.0 Joules of impact energy.

• Features three internal and three external rubber seals to help protect against dust and debris.

• SHOCKS vibration control and a vibrationreducing side handle limit vibration felt by the user at the handle to 9.8 m/s² for optimal user comfort.

• Features Hammer Drill, Drill Only, and Chipping operation modes.

ForConstructionPros.com/12109388

Bon Wave Handle Provides Greater Comfort Bon’s Wave Handle is patent pending on this arched back handle with finger holds on the underside. The unique ergonomic design provides contractors a comfortable and slip-free hold on the tool.

• Currently available in comfort grip style on select concrete and masonry tools.

• Bon will begin production of wood Wave handle models in 2017 ForConstructionPros.com/12262414

www.forconstructionpros.com/concrete | October/November 2016 | Concrete Contractor 65

CONC1016_65_PowerTools.indd 65

10/14/16 12:47 PM

INDEX ADVERTISER PAGE Aggretex................................................................33 American Technical Publishers............................8 BackSaver..............................................................52 Bloom Manufacturing Inc.....................................62 Briggs & Stratton..................................................5 CDC Larue.............................................................48 CMS Pervious........................................................60 Collomix USA........................................................63 ConExpo................................................................55 CTS Rapid Set Cement Mfg Co..........................29 EDCO Equipment Development Co..................42 Ermator USA.........................................................51 Fascut Industries...................................................9 GelMAXX...............................................................42 Gensco Equipment Company.............................10 Headwater Resources...........................................64 HTC, Inc.................................................................43 Husqvarna Construction Products......................53 Kubota Tractor Corporation................................2 Kut-Rite Manufacturing........................................40 Larsen Products Corporation...............................57 Laticrete.................................................................31, 41, 45 Ligchine International Corp.................................23 Mapei Corporation USA......................................68 McKinnon Materials, Inc.......................................34-35 Miracote................................................................25 MK Diamond Products, Inc..................................54 Multiquip Incorporated........................................21 National Pavement Expo.....................................67 Pentair....................................................................7 Putzmeister America............................................15 The Quikrete Companies.....................................61 Roadware, Inc........................................................44 Spin Screed...........................................................18 Superabrasive Inc.................................................37 Terrco Inc...............................................................39 Trimaco..................................................................49 Trinic.......................................................................27 Void Form..............................................................10 Wagner Meters.....................................................9 World of Concrete................................................11 Xtreme Polishing Systems....................................44

Statement of Ownership, Management, and Circulation

(Requester Publications Only)

1. Publication Title

2. Publication Number

3. Filing Date

Concrete Contractor

021-799

September 1, 2016

4. Issue Frequency

5. Number of Issues Published Annually

6. Annual Subscription Price

Jan, Feb/Mar, Apr/May, Jun/Jul, Aug/Sep, Oct/Nov, Dec

7

Free to Qualified Subscribers

7. Complete Mailing Address of Known Office of Publication (Street, City, County, State, and Zip+4)

Contact Person

AC Business Media, Inc 201 N. Main Street Fort Atkinson, WI 53538

Telephone

Wendy Chady

(920) 542-1225

8. Complete Mailing Address of Headquarters or General Business Office of Publisher

AC Business Media, Inc., 201 N. Main Street, Fort Atkinson, WI 53538

9. Full Names and Complete Mailing Addresses of Publisher, Editor, and Managing Editor Publisher (Name and Complete Mailing Address)

Ryan Olson, Publisher 201 N. Main Street Fort Atkinson, WI 53538 Editor (Name and Complete Mailing Address)

Ryan Olson, Editor 201 N. Main Street Fort Atkinson, WI 53538 Managing Editor (Name and Complete Mailing Address)

10. Owner (Do not leave blank. If the publication is owned by a corporation, give the name and address of the corporation immediately followed by the names and addresses of all stockholders owning or holding 1 percent or more of the total amount of stock . If not owned by a corporation, give the names and addresses of the individual owners. If owned by a partnership or other unincorporated firm, give its name and address as well as those of each individual owner. If the publication is published by a nonprofit organization, give its name and address.)

Full Name

Complete Mailing Address

AC Business Media, Carl Wistreich, President & CEO 201 N. Main Street, Fort Atkinson WI 53538 AC Business Media, Anil Narang, Chairman 201 N. Main Street, Fort Atkinson WI 53538 11. Known Bondholders, Mortgagees, and Other Security Holders Owning or Holding 1 Percent or more of Total Amount of Bonds, Mortgages or Other Securities. If none, check here.  None Full Name

Complete Mailing Address

12. Tax Status (For completion by nonprofit organizations authorized to mail at nonprofit rates) . (Check One) The purpose, function, and nonprofit status of this organization and the exempt status for federal income tax purposes:

 Has Not Changed During Preceding 12 Months  Has Changed During Preceding 12 Months

PS Form 3526-R Facsimile, July 2014 13. Publication Title

14. Issue Date for Circulation Data Below

Concrete Contractor

Aug/Sep 2016

15. Extent and Nature of Circulation

Average No. Copies

a. Total Number of Copies (net press run) Outside County Paid/Requested Mail Subscriptions stated on

No. Copies of Single

Each Issue During

Issue Published

Preceding 12 Months

Nearest to Filing Date

27862

27743

18145

21090

0

0

2

1

(1) PS Form 3541. (Include direct written request from recipient, telemarketing and b. Legitimate

Internet requests from recipient, paid subscriptions including nominal rate subscriptions,

Paid and/or Requested

employer requests, advertiser's proof copies, and exchange copies.)

(2) In-County Paid/Requested Mail Subscriptions stated on PS

Distribution

Form 3451. (Include direct written request from recipient, telemarketing and internet

(By Mail

requests from recipient, paid subscriptions including nominal rate subscriptions,

and Outside the Mail)

employer requests, advertiser's proof copies, and exchange copies.)

(3) Sales Through Dealers & Carriers, Street Vendors, Counter Sales, and Other Paid or Requested distribution Outside USPS. (4) Requested Copies Distributed by Other Mail Classes

0

0

18147

21091

9380

6458

0

0

Through the USPS. (e.g. first-Class Mail) c. Total Paid and/or Requested Circulation [Sum of 15b(1), (2), (3), (4)] (1) Outside County Nonrequested Copies stated on PS form 3541. (include sample copies, requests over 3 years old, requests induced by a premium,

d. Nonrequested

bulk sales and requests including association requests, names obtained from

Distribution

business directories, lists, and other sources)

(By Mail

(2) In-County Nonrequested Copies stated on PS form 3541.

and Outside

(include sample copies, requests over 3 years old, requests induced by a premium,

the Mail)

bulk sales and requests including association requests, names obtained from business directories, lists, and other sources)

(3) Nonrequested Copies Distributed Through the USPS by Other Classes of Mail.(e.g. First-Class Mail, nonrequestor copies mailed in

0

0

133

9

excess of 10% Limit mailed at Standard Mail or Package Services Rates)

(4) Nonrequested Copies Distributed Outside the Mail (include pickup stands, trade shows, showrooms, and other sources)

e. Total Nonrequested Distribution (Sum of 15d (1), (2), and (3)) f. Total Distribution (Sum of 15c and e)

9514

6467

27661

27558

g. Copies Not Distributed

202

185

h. Total (Sum of 15f and g)

27862

27743

i. Percent Paid and/or Requested Circulation

65.6%

76.5%

(15c / 15f x 100)

Visit ForConstructionPros.com’s content channel: Profit Matters. This channel highlights how contractors are improving profitability by implementing technology and best practices throughout their company operating structure. Visit www.ForConstructionPros.com/Profit-Matters to learn more.

*if you are claiming electronic copies, go to line 16 on page 3. If you are not claiming electronic copies, skip to line 17 on page 3.

PS Form 3526 -R Facsimile, July 2014

Statement of Ownership, Management, and Circulation

(Requester Publications Only)

Average No. Copies

16. Electronic Copy Circulation

No. Copies of Single

Each Issue During

Issue Published

Preceding 12 Months

Nearest to Filing Date

982

1,668

b. Total Requested and Paid Print Copies (Line 15C) + Requested/Paid Electronic Copies (Line 16a)

19,129

22,759

c. Total Copy Distribution (Line 15F) + Requested/Paid Electronic Copies (Line 16a)

28,643

29,226

a. Requested and Paid Electronic Copies

d. Percent Paid and/or Requested Circulation (Both Print & Electronic Copies) (16b divided by 16c X 100)

66.8%

77.9%

 I certify that 50% of all my distributed copies (electronic & print) are legitimate requests or paid copies 17. Publication of Statement of Ownership for a Requester Publication is required and will be printed in the October/November issue of this publication.

18. Signature and Title of Editor, Publisher, Business Manager, or Owner

Carl Wistreich, President & CEO

Date

09/1/2016

I certify that all information furnished on this form is true and complete. I understand that anyone who furnishes false or misleading information on this form or who omits material or information requested on the form may be subject to criminal sanctions (including fines and imprisonment) and/or civil sanctions (including civil penalties).

PS Form 3526 -R Facsimile, July 2014

66 Concrete Contractor | October/November 2016 | www.forconstructionpros.com/concrete

CONC1016_66-68_Index.indd 66

10/26/16 2:13 PM

FEB. 1-4, 2017 | MUSIC CITY CENTER | NASHVILLE ALL-NEW LEADERSHIP BOOT CAMP — JANUARY 31

GET DETAILS & REGISTER:

NationalPavementExpo.com Enter the Equipment Giveaways, select from 50+ conference sessions including more than 30 timely management topics and learn about adding asphalt or pavement marking services to your concrete business.

CONC1016_66-68_Index.indd 67

Visit our exhibitors, including: » Bobcat » Crafco » Simex srl » Coneqtec-Universal » Keystone Engineering » SMITH Manufacturing » Right Pointe Company » … and many more!

10/26/16 2:13 PM

MAPEI takes it to the next level with Mapefloor ™ Parking Deck Systems For standard and heavy pedestrian/vehicular traffic

UV-resistant polyurethane topcoat

Mapefloor Finish 450 Polyurethane intermediate membrane + broadcast with 16/30 mesh sand

Mapefloor Finish 415 NA High-flexibility polyurethane basecoat

Mapefloor PU 400 LV

Epoxy primer

Primer SN ™

Concrete

Mapefloor parking deck systems provide surfaces with the following: • High flexibility with good crack-bridging capacity • High resistance to wear and abrasion for long-lasting performance • Low-odor and VOC-compliant • Excellent resistance to chemical agents, including diluted acids, bases, oil, fuel and salts • Highly attractive wearing surface Ask your local sales representative about our Mapefloor parking deck systems or visit www.mapei.com.

Keyword: MAPEI Americas

CONC1016_66-68_Index.indd 68

10/26/16 2:13 PM