Concrete Contractor October/November 2014

Thoughts from a Seasoned Decorative Concrete Contractor

Page 26

140+ Products Inside

October/November 2014

2015

PRODUCT GUIDE Your Source for Concrete Jobsite Tools & Equipment

Tier 4 Equipment What You Need to Know Page 56

www.forconstructionpros.com/concrete CONC_01_Cover1014Final2.indd 1

10/15/14 9:45 AM

SIERRA HAS A ROLE MODEL:

HOOVER DAM. Hoover Dam’s power plant uses smart grid technology to conserve energy when it can, then make more power when needed. The new 2015 GMC Sierra 1500 uses our advanced EcoTec3 engines for similar reasons. Sierra is the first full-size light-duty pickup to combine Direct Injection, Variable Valve Timing and Active Fuel Management technology standard on every engine. The result is the most fuel-efficient V-8 available in a pickup,* even beating Ford F-150’s EcoBoost V-6.** It’s this kind of thinking that proves Sierra is more than just a truck. It’s incredible thinking in the form of a truck.

THE NEW GMC SIERRA. THAT’S PROFESSIONAL GRADE.

*Sierra EPA-estimated mpg with the available 5.3L V-8: 16 city/23 hwy (2WD); 16 city/22 hwy (4WD). **2014 Ford F-150 EPA-estimated mpg with EcoBoost V-6: 16 city/22 hwy (2WD); 15 city/21 hwy (4WD). †Available OnStar 4G LTE in vehicles produced starting fall 2014. See dealer for vehicle availability. Visit onstar.com for details and system limitations. Services vary by model and conditions. Requires active OnStar subscription and data plan. ©2014 General Motors. All rights reserved. Active Fuel Management® ECOTEC® GMC® OnStar® OnStar button design® Sierra® WE ARE PROFESSIONAL GRADE®

CONC1014_02-3_TOC.indd 2

†

10/15/14 9:46 AM

Contents

2015

PRODUCT GUIDE Your Source for Concrete Jobsite Tools & Equipment

October/November | Issue 6, Volume 14

Product Guide Categories 8 Forms & Reinforcement 16 Additives 18 Pumps, Placing & Consolidation

8

22 Screeds & Trowels 28 Decorative Products & Equipment 33 Polishing Products & Equipment 45 Surface Prep & Dust Extraction 47 Sawing & Drilling 51 Repair

18

54 Testing & Software 58 Work Site Products & Equipment 65 Power Tools, Hand Tools, Lasers & Leveling

Departments

28

6 Editor’s Letter 66 Ad Index

Features 26 Thoughts from a Seasoned

Decorative Concrete Contractor

26

44 New Silica Dust Regulations

- Are You Ready?

56 What You Need to Know

About Tier 4 Equipment

45 www.forconstructionpros.com/concrete | October/November 2014 | Concrete Contractor

CONC1014_02-3_TOC.indd 3

3

10/15/14 9:46 AM

ONLINE EXCLUSIVES Published by AC Business Media Inc.

Read these online exclusive articles at

www.forconstructionpros.com/concrete

CRETE-LEASE 880-VOCXtra Key to “Field of Jeans” Aesthetic

Eco-friendly formulation maximizes visual impact and mimics form surfaces for new Levi’s Stadium.

Search: 12002675

PO Box 803, 1233 Janesville Ave., Fort Atkinson, WI 53538-0803 (800) 547-7377 • www.ACBusinessMedia.com

www.ForConstructionPros.com/Concrete

PUBLICATION STAFF

Nancy Terrill , ext. 1387 nterrill@ACBusinessMedia.com Ryan Olson, (847) 454-2719 rolson@ACBusinessMedia.com Kim Basham, Jim Baty, Brad Humphrey, David C. Whitlock, Joe Nasvik Ad Production Manager Cindy Rusch Art Director April Van Etten Sr. Audience Development Manager Wendy Chady Audience Development Manager Tammy Steller Publisher

Editor

Contributing Writers

ADVERTISING SALES

Jill Draeger Eric Servais Erica Finger Amy Schwandt Sean Dunphy Denise Singsime National Automotive Sales

Lafarge Cement Products Contribute to a Strong and Sustainable Rail Station Rhode Island multi-modal commuter rail station, Wickford Junction, finds right mix of design flexibility, improved performance and green transportation benefits.

Search: 12007079

ext. 1617, jdraeger@ACBusinessMedia.com ext. 1713, eservais@ACBusinessMedia.com ext. 1324, efinger@ACBusinessMedia.com ext. 1667, aschwandt@ACBusinessMedia.com ext. 1504, sdunphy@ACBusinessMedia.com ext. 1381, dsingsime@ACBusinessMedia.com Tom Lutzke tlutzke@ACBusinessMedia.com (630) 484-8040

FORCONSTRUCTIONPROS.COM

Digital Sales Consultant Norine Conroy, ext. 1330 nconroy@ACBusinessMedia.com Digital Operations Manager Nick Raether, ext. 1303

nraether@ACBusinessMedia.com Editor Larry Stewart, ext. 1653

lstewart@ACBusinessMedia.com Managing Editor Kimberly Hegeman, ext. 1374

khegeman@ACBusinessMedia.com CHANGE OF ADDRESS & SUBSCRIPTIONS

PO Box 3257, Northbrook, IL 60065-3257, Phone: (847) 559-7598 Fax: (800) 543-5055 • circ.ConcreteContractor@omeda.com

The ‘Greening’ of Chicago’s Navy Pier

REPRINTS Nick Iademarco at Wright’s Media (877) 652-5295 ext. 102 niademarco@wrightsmedia.com.

Alliance Concrete Sawing & Drilling was tasked with removing structural concrete on Chicago’s Navy Pier to create recessed steel and concrete tree pits.

Search: 12004318

LIST RENTAL Elizabeth Jackson, Account Executive, Merit Direct LLC, Phone: (847) 492-1350 ext. 18 Fax: (847) 492-0085 • ejackson@meritdirect.com AC BUSINESS MEDIA INC.

Chairman President and CEO Executive Vice President VP Content VP Marketing

Anil Narang Carl Wistreich Kris Flitcroft Greg Udelhofen Debbie George

Published and copyrighted 2014 by AC Business Media Inc. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording or any information storage or retrieval system, without written permission from the publisher.

ENHANCE YOUR READING EXPERIENCE with our online content.

What Does “Search: 10830163” Mean? Each article found in Concrete Contractor’s pages has a unique, eight-digit code that you can enter into the search bar found at the top of www.forconstructionpros.com/concrete. Find online exclusive articles, related content, products and more.

CONCRETE CONTRACTOR (USPS 021-799 , ISSN 1545-4193) is published 7 times a year: January, February/March, April/May, June/July, August/September, October/November and December

by AC Business Media Inc., 1233 Janesville Avenue, Fort Atkinson, WI 53538. Printed in the U.S.A. Periodicals postage paid at Fort Atkinson, WI, and additional entry offices. POSTMASTER: Send address changes to Concrete Contractor, PO Box 3605 Northbrook, IL 60065-3605 October/November 2014. Issue 6, Volume 14

10830163

One year subscription to nonqualified individuals: U.S. 1 year: $35, 2 years: $70. Canada & Mexico 1 year: $60, 2 years: $105. All other countries 1 year: $85, 2 years: $160 (payable in U.S. funds drawn on U.S. banks). Single copies available (prepaid only) $10.00 each (U.S., Canada & Mexico), $15.00 each (International).

Canada Post PM40612608. Return Undeliverable Canadian Addresses to: Concrete Contractor, PO Box 25542, London, ON N6C 6B2.

Concrete Contractor is the Official Media Sponsor of the CFA Foundation Company Certification Program

4 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_04-5_OnlineTOC.indd 4

®

10/15/14 9:48 AM

Built for You

Designed with finishers feedback For over 25 years concrete finishers have trusted Wacker Neuson trowels • Built for easy operation: Dynamic balance offers 50% less push back to the operator.

• Built with safety in mind: protects the operator from a run-away handle impact.

• Built with a variety of choices: complete line for any type of job.

www.wackerneuson.com

Scan for Free Demo

Find us on:

4.02.08 updated

CONC1014_04-5_OnlineTOC.indd 5

10/15/14 9:48 AM

Editor’s Letter

Brighter Days Are Ahead

With reportedly more work, contractors are telling us business is back. Use this issue as your guide to the latest products available to you.

I

t’s that time of year again. Summer is moving out and Fall is creeping upon us. During my travels this summer, I had the opportunity to speak with a number of contractors who all told the same story.

“Business is good.”

“We’re busy.”

“We’re turning down work because we can’t keep up.”

And judging by the “buzz” in the air from both manufacturers and contractors at the CFA convention and the more recent, ASCC conference, a rebound in the industry is afoot. We couldn’t be happier to see brighter days upon us!

Don’t forget, if you’re involved in a unique and challenging project, drop me a line and tell me about it. We might feature it in a future issue of Concrete Contractor!

What you’re holding in your hands is the latest edition of our Annual 2015 Product Guide. Historically, this issue has been chock full of products and equipment you can utilize in your project. Many of the products featured in this issue offer jobsite solutions to work smarter, more efficient, and in some cases, reduce your labor costs.

Additionally, we added a few new features to this issue. Based on some of the conversations I’ve had with contractors over the last several months, we decided to offer a few broad based editorial pieces as an introduction to specific sections. First up, on page 26 we caught up with Tom Ralston, an award winning decorative concrete contractor to discuss the trends he is seeing in decorative concrete work and his predictions for the industry in 2015.

Editor

Ryan Olson, Rolson@ ACBusinessMedia.com (847) 454-2719

Advisory Board Tim Blankenship Blankenship Concrete Specialties; Atlanta, Ga. Chris Chan Architectural Concrete Construction Fairfield, Calif.

Jim Cuviello Cuviello Concrete - Polished|Stained|Crafted Stevensville, Md.

On page 44, we pose the question, “Are you ready for the new silica dust regulations?” This piece examines the proposed new OSHA rules regarding silica dust and what it means to you and your business.

Finally, on page, 56, we offer a brief introduction to Tier 4 engine technology. Understanding the implications of this transition and what to expect as new machines enter the market will help you determine what machine will best fit your needs.

We hope you enjoy this issue and make it a point to use it as a resource for the coming year. And if you’re looking to do some research behind specific product categories, visit the Buyers Guide on our website, www.forconsturctionpros.com/directory.

Mike Donlin Donlin Building, Inc.; Miller, S.D. Jim Engelman Engelman Construction, Inc.; Macungie, Pa. Ira Goldberg Beyond Concrete; Keyport, N.J. Julio Hallack Concrete Innovations by Hallack Turlock, Calif.

Chris Klemaske T.B. Penick & Sons, Inc.; San Diego, Calif.

Michael Klein Five Star Concrete Solutions; Howell, Mich.

Tim Parrish Cornerstone Foundations.; Harrisonburg, Va. Mike Poppoff Poppoff, Inc.; Moxee, Wash.

Dennis Purinton Purinton Builders, Inc.; East Granby, Conn.

Greg Randa The Randa Group, Inc.; Yorkville, Ill. Shellie Rigsby Decorative Construction Supply, Inc. Dallas, Texas

excited ’re very e w , ia e t r no ss Med anothe Busine C A f ), o P.S. On om nch media.c ctor the lau usiness about b tra c n o .a C w w oncrete Inc. (w C f rtfolio o r owne ister po ew s w s e it n h e th en ng wit nds. Th ine, alo up bra ro magaz rtunity G o n p p io struct r fect o e p a s of Con ent t which ny pres estmen ward v in d compa n s for wth a ropel u for gro s and lp to p e h fo ly t n la rm will o ucts, p . d ro n p u w y t ed with ne offerings. Sta t n conte

Joshua Salmonson Rykor Concrete & Civil; Norfolk, Mass.

Todd Schneider Schneider Contracting Corp.; Alexandria, Va. Darrin Thornton PolySteel Alternative Building Systems, Inc. Central Point, Ore. Chuck Tower Oakridge Builders, A Division of Flintco, Inc. Tulsa, Okla.

Shawn Wardall Specialized Construction Services, Inc. Waterloo, Wis. Randy K. Wilkerson Sustainable Building Strategies, LLC Knoxville, Tenn.

Facebook.com/ ConcreteContractor

Follow us @ Concreteinsider

Dan C. Yeghoian Brundage-Bone Concrete Pumping Denver, Colo.

6 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_06-7_Editorial.indd 6

10/15/14 9:48 AM

CONNECTING LEGACIES OF INNOVATION UNDER ONE BRAND. MASTER BUILDERS SOLUTIONS.

Partnerships to Build a Sustainable Tomorrow Meeting the construction needs of today and tomorrow requires a connected approach. By creating one global brand for the construction chemicals industry, we are combining the leading expertise and innovative strength of BASF brands with more than a century of experience under one roof: Master Builders Solutions. We are dedicated to partnering with our customers to help them succeed in solving the most challenging construction applications, all while minimizing environmental impact and saving resources. www.master-builders-solutions.basf.us

Š 2013 BASF Corporation. All rights reserved.

CONC1014_06-7_Editorial.indd 7

10/15/14 9:48 AM

Forms & Reinforcement Gensco Twister Rotary Tying Tool

CertainTeed Form-A-Drain Form-A-Drain is a combination concrete footing form system, foundation drainage system and radon reduction system for residential basement applications.

• Vinyl lineal sections are used to form the footing, then remain permanently in place after the concrete is poured • Collects groundwater and transports it to a sump pit or a drainage pipe going to the outside; radon gas is also collected and safety evacuated through a separate vent pipe.

• Available in 4-, 6-, 8- and 10-in. sizes • Manufactured from 100% pre- and postconsumer PVC • Reduces jobsite waste by eliminating the need to install, remove and dispose of footing forms

The Twister Rotary Tying Tool is designed to cut, twist and tie rebar in place.

• Cuts excess wire on closing • No batteries or electricity required • Operator controls the tightness of the tie ForConstructionPros.com/10165436

Western Forms B.E.P. Super-Ply •

• •

•

• •

All-aluminum frame big panel with composite face sheet Lightest crane-set, cast-in-place big panel Superior durability over wood with high-quality finish Largest range of sizes: widths 6 in. to 21 ft.; heights 1- to 12-ft.

No consumables, ties are reusable Taper ties support 40,000 lbs. safe working load cap

ForConstructionPros.com/10091452

ForConstructionPros.com/10077675

PrimeSource Grip-Rite PROLOK High Chairs The Grip-Rite PROLOK High Chairs feature a locking head that raises rebar or reinforcing wire mesh to the proper position and secures rebar intersections with no tie wire or bar ties.

• Stackable for multi-layer grids • Engineered to fit No. 3 through No. 6 rebar and all mesh sizes • Available in 1- to 4-in. heights • The base will not puncture vapor barriers and ensures settling will not occur before the pour • Reflective for low-light projects • D.O.T. approved • Addition of the snap-on Sandplate Base accessory creates a 4-in.-diameter base for stability in soft and sandy applications; for use with 1- to 3-in. chairs ForConstructionPros. com/10615800

Prinsco PROFORM Pipe System PROFORM is an easy-to-install pipe system that creates a permanent form for foundation footings, and also provides drainage and radon venting in one product. Contractors save time by not having to strip and remove wood forms after the concrete is set, or install additional drainage pipe around the foundation.

• Self coupling pieces are easy to cut and fit on the job site, eliminating waste and the extra expense of couplers • PROFORM is made from high-density polyethylene plastic which is lightweight, durable and resistant to cracking or chipping, unlike alternative products made from PVC • Easy to haul, handle and install ForConstructionPros.com/11508023

Victory Bear K-Form Concrete Formwork System This “one concept” approach to slab production eliminates the materials, transportation and clean-up of temporary forming methods and form anchors as well as the need for any dowel placement components.

• Lightweight PVC, cast-in-place screed rail is strong enough to handle all types of mechanical screeds • Provides a built-in expansion joint; pre-drilled dowel holes; and a built-in, removable void cap • 2- to 8-in. slabs • Ideal for use with vapor barriers • Form driveways to multi-deck pours to industrial slabs ForConstructionPros.com/10367320

8 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_08-15_Forms.indd 8

10/15/14 9:49 AM

17,000+ Standard in-stock items

15 13

Distribution centers

Manufacturing facilities

1 Million Projects worldwide and counting

90 YEARS Of industry leadership

1 for you

Complete solution daytonsuperior.com

For a FREE Bilingual Spec Guide & Comparison Tool visit www.daytonsuperior.com/referencetools

CONC1014_08-15_Forms.indd 9

10/15/14 9:49 AM

Forms & Reinforcement ITW Red Head Epcon S7 Fast Cure Adhesive

Forta-Ferro Forta-Ferro is a synthetic macro fiber reinforcement used to reduce plastic and hardened concrete shrinkage, improve impact strength, and increase fatigue resistance and concrete toughness.

• Designed to mix and finish well, even at high dosages • Use in a variety of applications, including extended-joint floors, decorative and polished slabs, pervious pavements, and slabs on deck • Made of 100% virgin copolymer/polypropylene • Non-corrosive, non-magnetic and 100% alkali proof

Epcon S7, a fast cure hybrid epoxy for concrete applications from ITW Red Head.

• Code approved fast cure adhesive • Can be used in water saturated, water filled and submerged holes • Approved for use in cracked and uncracked concrete applications • Approved for all Seismic Zones (A-F) ForConstructionPros.com/11302283

ForConstructionPros.com/11173278

Doka Super Climber The Super Climber self-climbing core system allows inside and outside forms to be hung from the gantry allowing the contractor to roll forms away from core walls while erecting and stripping.

• All formwork is raised independently of the crane • Single stroke cylinder moves core with forms, placing boom and all level of working platforms up to next level • No shoes or profiles to be climbed or handled • Timber beam or framed formworks raised to next casting section in single lift by hydraulic cylinders ForConstructionPros.com/10930838

CUT and BEND REBAR At the Shop or Jobsite

#8 bar rotary bender/cutter combo

Portable #6 bar cutter/bender

Replacement blades for most brands

www.RebarBlades.com

Concrete Formwork Concrete Formwork provides valuable information on the construction and safe assembly and disassembly of formwork for residential, light commercial, and heavy commercial structures.

• Various aspects of concrete construction methods are presented in sequence, from site preparation through concrete placement and stripping forms • This edition has information on personal fall-arrest systems, concrete exposure hazards, concrete reinforcement, and heavy construction equipment and safety ForConstructionPros.com/12005192

Quality rebar equipment since 1979

FASCUT Industries Inc. (608) 643-6678

www.fascut.com

SEARCH for more information online using the unique URL under each product.

10 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_08-15_Forms.indd 10

10/15/14 9:49 AM

P E PR

T H G I R

SET

LOCK

POUR

 Secures rebar and mesh  Stackable for multilayer grids  Patented locking heads

 Strong, durable and lightweight  Reduce prep time up to 50%

To learn more or to become a stocking dealer, call 800-676-7777 or visit grip-rite.com.

CONC1014_08-15_Forms.indd 11

© 2014 PrimeSource Building Products, Inc.

10/15/14 9:49 AM

Forms & Reinforcement NUDURA Introduces The Optimizer The Optimizer, another product in the family of insulated concrete form (ICF) products from NUDURA offers installers and designers the ability to match more stack heights and reduce installation costs.

• Available in four section sizes to allow installers and designers to meet 17 different stack scenarios without the need to cut or rip forms • Utilizes NUDURA’s DURALOK Technology to lock forms into place with tripletoothed interlocks • A continuous height-fastening strip ensures the wall becomes a single unit • Available in four different core sizes ranging from 6-in. to 12-in.

• Available in North America and Europe through NUDURA authorized distributors ForConstructionPros.com/11446206

Bend and Cut Rebar Fast Fascut’s Model FS-600 combination rebar bender and cutter is a portable self-contained hydraulic workhorse that plugs into standard 110-volts or can be run from a generator. Fabricate stirrups, hooks, 3-D bends and cut bars to length at the shop or jobsite.

• Bend and cut through #6 (3/4”) rebar • Two people can lift and carry • Made in the USA ForConstructionPros.com/12002646

ET-HP Anchoring Adhesive The Simpson Strong-Tie ET-HP anchoring adhesive is the latest product to receive “cracked concrete” recognition in compliance with ICC-ES AC308. It is a two-component, high-solids epoxy system for use as a high-strength, non-shrink anchor grouting material for threaded rod and rebar doweling into concrete and masonry.

• ET-HP is code-listed under the current IBCR/IRCR for cracked and uncracked concrete per ICC-ES ESR-3372 and for masonry per IAPMO UES ER-241 • Suitable for use under static and seismic loading conditions in cracked and uncracked concrete • It can be used for horizontal, vertical and overhead applications • Features an easy hole-cleaning procedure with no power brushing required • Made in the United States ForConstructionPros.com/11577948

NewForm PoliGloss Concrete Forming Tubes NewForm PoliGloss concrete forming tubes are designed to produce a highgloss finish without spiral seams, eliminating the need for extensive manual finishing.

• Weather Shield improves water resistance and minimizes schedule changes due to inclement weather • QuickStrip Technology provides a quick and convenient method for the removal of forms without the use of a saw • One-time use • Available up to 60 in. in diameter and up to 30 ft. in length • 100% recycled paperboard ForConstructionPros.com/11251256

12 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_08-15_Forms.indd 12

10/15/14 9:50 AM

Xci ConCast

Polyiso for the Precast Market is Here!

Hunter Panels Xci ConCast

Polyisocyanurate Insulation Bonded to Tri-laminate Facers

Applications: Precast, tilt-up, or poured-in-place sandwich panels Polyisocyanurate: • Highest R value per inch of any foam plastic • Facer has no exposed metals, no corrosion or no chemical reactions • Facilitates compliance with ASHRAE 90.1 and IECC 2012

888-746-1114

www.hunterxci.com NEW YORK

CONC1014_08-15_Forms.indd 13

ILLINOIS

FLORIDA

TEXAS

UTAH

PENNSYLVANIA

WASHINGTON

10/15/14 9:50 AM

Cold-Formed Steel Solutions

Repair, Protection & Strengthening

Industrial Anchoring

Simpson Strong-Tie is on the job where you are with a growing range of product solutions for infrastructure, commercial, industrial and residential construction.

Our product line has evolved as a direct result of listening to the needs of our customers and staying true to our core strengths of customer service, product innovation, testing and manufacturing to the highest quality standards.

CONC1014_08-15_Forms.indd 14

10/15/14 9:50 AM

Commercial Construction

You are here

(so are we)

Infrastructure Solutions

Take us with you.

Download our Literature Library mobile app at strongtie.com/mobile.

Wherever your next job takes you, take Simpson Strong-Tie. Call your local rep or Field Engineer today at (800) 999-5099 and visit our website www.strongtie.com.

Š 2014 Simpson

Strong-Tie Company Inc. ICI14

CONC1014_08-15_Forms.indd 15

10/15/14 9:50 AM

Additives

BOOST! from SUPER-KRETE

Trinic LLC GFRC Admix Trinic LLC offers a powdered single dose admix for making ultra-high performance GFRC. This single dose admix has revolutionized GFRC allowing for traditional spray up or the option of direct cast applications. Trinic GFRC admix meets or exceeds traditional polymer performance with much lower dosing levels.

• Reduce pinholes, shrinkage and curling • Improves PSI/ Flexural strength and color dispersion • No shipping issues or paying to ship water • Single dose simplicity ForConstructionPros.com/11610459

Cementitious Materials from Holcim Customers have relied on Holcim for more than a century to help create engineering marvels that have become the foundation of the communities where we work and live. When the team building the third longest cable-stayed bridge in the U.S. needed concrete mixes they could rely on, Holcim was there with answers. Today, Holcim is a supplier of cementitious materials including the eco-efficient Envirocore family of products.

ForConstructionPros.com/12005176

SUPER-KRETE International, Inc. presents Concrete BOOST!, a ready-mix concrete booster that makes concrete stronger, harder and waterproof.

• Designed for smaller batches of concrete for use with a ready-mix sack up to 90 lbs.

• Can be used with any Portland cement-based material • One bottle will improve the overall matrix of the concrete by increasing strength up to 23%, waterproofing the concrete, resisting shrinkage cracks and improving the workability of the mix • The treated concrete results are reduction in permeability, efflorescence, susceptibility to freeze/thaw damage and resistance to water, radon and chloride ion intrusion • In concrete countertops, it will help keep slabs from curling as they cure ForConstructionPros.com/12005471

DELIVERING SUSTAINABLE SOLUTIONS After water, concrete is one of the most sustainable and widely-used materials in the world.

Fly ash plays an important role in increasing the sustainability of concrete. Headwaters Resources is the nation’s leader in supplying quality fly ash. We can help you discover how to improve the performance of your concrete while simultaneously improving its environmental profile.

Visit www.flyash.com for answers to the most common questions about fly ash. You can also contact your expert Headwaters Resources technical support representative for advice on your specific sustainability opportunities.

www.flyash.com 16 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_16-17_Additives.indd 16

10/15/14 9:50 AM

We help make your customers’ brilliant ideas concrete.

The Stan Musial Veterans Memorial Bridge, St. Louis, MO

When the team building the third longest cable-stayed bridge in the U.S. needed concrete mixes they could rely on, Holcim was there with answers – for all 46,000 cubic yards of concrete used.

2,770 feet in length, two 405 foot tall A-shaped towers with a concrete deck and reinforced concrete piers that measure 400 ft.

For the piers, Holcim helped develop a mix for heat reduction and in the process exceeded the 6000 psi strength requirement delivering up to 8000 psi – without a single failure. And because the concrete gained strength quickly the piers were above the high water line before the spring thaw, helping keep the project on time and on budget.

Find out how getting the mix right makes engineering marvels possible. Invite us to the table today.

888.646.5246 www.holcim.us

Perfecting Progress™

CONC1014_16-17_Additives.indd 17

10/15/14 9:50 AM

Pumps, Placing & Consolidation Wacker Neuson BV 50A-H

Putzmeister 38Z Truck-Mounted Concrete Boom Pump The new 38Z-Meter Truck-Mounted Concrete Boom Pump features a completely brand new design for its five-section boom arm and pedestal for increased maneuverability, a reduced boom unfolding height, reduced overall weight and a more user-friendly design.

• Unfolding height of 24 ft.

• Boom arm reach is 108 ft. horizontal and 123 ft. vertical • Gross vehicle weight under 53,000 lbs.

• Only three types of elbows used in pipe layout • Ergonic Graphic Display features wireless computer technology and a high resolution, color screen ForConstructionPros.com/11249275

The BV 50A-H provides a convenient way for contractors to use the company’s flex-shafts and heads from its HMS flex shaft internal vibrator system.

• The BV 50A-H features a 50cc Honda engine • Ideal for elevated decks and structural slabs • Shoulder mounted on/off switch and throttle • A quick disconnect system provides for quick change of the various shafts and heads available • The BV 50A-H weighs 29 lbs.

• Can be used with Wacker Neuson’s 10-, 13- and 16.5-ft. SM flex shafts and the 1-3/8-, 1-3/4and 2-in. high amplitude, hybrid heads ForConstructionPros.com/12002401

Schwing S 43 SX Concrete Pump The S 43 SX concrete pump features the fivesection RZ boom, which combines features of the Roll and Fold and Z boom types for a compact travel position and 918-degree articulation.

• Places concrete up to 138 ft. 8 in. vertically and 125 ft. horizontally • Slewing range of 740° • Super X Outriggers allow fast setup and provide a compact, stable platform • Standard Vector Control system includes twin joysticks • Generation 3 2525-6 concrete pump provides long slow-stroking action and up to 213 cu. yds. per hour ForConstructionPros.com/10929075

18 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_18-21_Pumps.indd 18

10/15/14 9:51 AM

Oztec’s concrete vibrating heads, shafts and motors are quickly interchangeable on site.

CONC1014_18-21_Pumps.indd 19

10/15/14 9:51 AM

Pumps, Placing & Consolidation Carbon Fiber Concrete Boom - CIFA K45H

Line Dragon Concrete Placement The Line Dragon is a remote-controlled concrete placement machine.

• Will run over rebar grid, radiant heat lines, nelson studs, floor decking or other prepared surfaces • Placing boom swings 360-degrees • Moves forward, backward, left, right or oblique • Weighs about 1,000 lbs.

• 12-hp gas engine ForConstructionPros.com/11151975

Oztec BP-50 Backpack Concrete Vibrator • •

•

•

Totally enclosed rotary throttle Comes standard with Quick Disconnect “QD” system and Honda gasoline engines Vibrator heads develop 12,000 vpm and never drop below 10,000 vpm even in heaviest low slump concrete loads Handles heads up to 2 1/2 in.

ForConstructionPros.com/10084378

Irving Equipment is offering a new model of the carbon fiber concrete boom, the CIFA K45H. The first three booms are fabricated from high-strength steel and the last two sections are made from carbon fiber.

• 5-section R-Z style boom system with Valme 5-in. metric pipe along the entire length.

• HPG 1408-IF9 has an output of 185 yards per hour (1,160 PSI) using 9-in. pistons and a 9-in. S-tube.

• Cutting ring and wear plate are easily serviced from inside the hopper without moving the S-tube.

• The K45H installed on a 4-axle chassis weighs about 73,000 lbs.

ForConstructionPros.com/11362586

COUGAR Whirlwind High-Frequency Turbine Vibrator Great for concrete consolidation and railcar unloading, this urethane-encapsulated turbine vibrator mounts easily with cradle lug brackets.

• Larger unbalance creates greater force output to move your material • Testing shows noise level from 6 to 10 dB less than competitive models and within OSHA noise limits • Built-in handle provides easy portability for use in railcar unloading or on pre-cast forms applications ForConstructionPros.com/12005287

40 Now that business is back,

buy a pump that means business.

Nothing is more important to your business than placing concrete and nothing places concrete like a Schwing pump.

Control your pour schedule and count on the reliability of a Schwing to place ½ to 2½-inch mixes at 30 to 118 yards per hour. Now that business is back… retain more of the profits and enjoy up to 50% resale value after 10 years of Schwing ownership.

All POWERED BY CAT ENGINES

5900 Centerville Road | St. Paul, MN 55127 | 1-888-SCHWING FAX 651-429-3464 | www.schwing.com

20 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_18-21_Pumps.indd 20

10/15/14 9:51 AM

PERFORM AT A HIGHER LEVEL

38Z-5

Meter Truck-Mounted Concrete Boom Pump Redefine your job-site performance with the Putzmeister 38Z-5 Meter truck-mounted boom pump, featuring a new five-section design. Engineered for maximum maneuverability and flexibility, this sleek unit is refined with a reduced boom unfolding height and equipped with our exclusive Ergonic® Control System. The culmination of superior craftsmanship and an unmatched commitment to quality, the 38Z-5 is the industry’s premier solution to help you perform at a higher level.

At Putzmeister, exceeding your expectations isn’t a goal – it’s mandatory.

1.800.884.7210 | PutzmeisterAmerica.com

CONC1014_18-21_Pumps.indd 21

10/15/14 9:51 AM

Screeds & Trowels Multiquip Whiteman HTXD6i Ride-on Trowel The Whiteman HTXD6i 8-ft. hydrostatic trowel features a 55-hp Yanmar 4TNV turbo diesel engine that produces 20% more horsepower than the previous generation design.

• Attains rotor speeds up to 160 rpm • SmartPitch control allows the pitch of both rotors to be synchronized with the touch of a button • Power Management senses load and adjusts hydraulic pump stroke to ensure peak operating efficiency and eliminate engine bogging under severe loads

Lura Lightning Strike Screed

ForConstructionPros.com/10692934

The Lightning Strike Concrete Screed weighs less than 4.5 lbs. per foot, enabling easy transport and one-person setup.

• Composed of rugged, construction-grade aluminum • Screed sections available separately or as part of various packages • Clevis articulating, all-position handle • Gas or electric engines • Accessories available for specialized work

MegaScreed Concrete Leveling System

ForConstructionPros.com/10086248

•

• ®

®

• •

Replaces wooden stake method of setting screed on flatwork projects Specially designed for large concrete finishing operations and heavy-duty industrial finishing equipment New 15 mm yoke fits odd-shaped foreign rebar and American-made rebar Eliminates pockets caused by stake removal and low spots from wet screeding

ForConstructionPros.com/10091134

KEEP CONCRETE ON THE LEVEL 800-937-5234 www.accuscreed.com 2332 Eastern Avenue #2 Davenport, IA 52803

sales@accuscreed.com

EZYSCREED Manual Screed EZYSCREED is a manual screed, featuring an inbuilt level and reversible capabilites. It is lightweight with a designed screeding edge and reinforcements, making it useful, economical and strong.

• Available in lengths from approximately 3 ft.(900mm) to approximately 12 ft. (3.6 m).

ForConstructionPros.com/12003790

22 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_22-25_Screeds.indd 22

10/15/14 9:52 AM

#1 SUPPLIER OF BOOM EXTENSION CONCRETE SCREEDS THE WORLD’S

NEW

ScreedSaver MAX with Ligchine/Topcon 3D GPS satellite control system placing a multi-contoured parking lot. This versatile control system easily transfers between any ScreedSaver machine, as well as your entire fleet of Excavators, Dozers, Graders, and Curb machines.

MACHINE INNOVATION

SCREEDING VERSATILITY

› World’s first wireless remote control screed

› Flat, slope and dual slope slabs via laser control

› First zero turn screed machine ever offered

› Contoured slabs via 3D GPS satellite control

› Only all-terrain track drive screed in the world

› Screed on poly, heat tubing and Styrofoam with ease

› First boom screed hauled by a pickup truck/trailer › Fastest screed head attachment/setup (5 minutes) › First 3D GPS control system for contoured screeding

› Screed on wire mesh and rebar without damage › Drive on double mat rebar options › Superflat screed heads - world class FL/FF results

› Only company to offer a choice of 3 sizes of boom style screeds

› Optional roller heads for pervious and topping slabs

› Numerous machine options to enhance ownership

› Drive anywhere with all-terrain track system

CALL: 812-903-4500 or EMAIL: sales@ligchine.com WEB: www.ligchine.com CONC1014_22-25_Screeds.indd 23

10/15/14 9:52 AM

Screeds & Trowels MBW Heavy Weight High Speed Power Trowel

Allen Face Companies Laser Strike FL Screed The new Laser Strike FL Screed is a laser-guided floating screed that eliminates all grade cutting on concrete floors and contributes to increased FL results.

• Computer-controlled actuator automatically adjusts trim blade to keep float at laser-defined target elevation • LCD control panel constantly displays screeded elevation to nearest 0.020 in.

• 360° custom laser receiver allows screeding in all directions without rotating mast • Bull-nosed float with overlap guide allows accurate overlapping without build-up or gouging • Reduces manpower needs by 1 or 2 employees • Unit weighs 80 lbs. and is 12 ft. long ForConstructionPros.com/10963850

MBW introduces a heavy weight high speed trowel for finishing of concrete under adverse conditions. Model 465199 is a 46” diameter machine powered by a GX390 Honda engine factory set to 3,400 engine RPM. • The machine weighs 275 lbs.

• Offers a rotor speed range of 35 to 180 rpm • Available with either conventional twist adjusting or Constant Force Pitch handles • MBW Walk-Behind Power Trowels feature heavy bearings, output shafts, gears, spiders and blade arms • MBW says, the handles are up to 6” longer than most competitors for greater leverage and are adjustable to fit the operator more comfortably • MBW offers 24”, 36” and 46” trowels.

ForConstructionPros.com/11621327

Ligchine International ScreedSaver Ligchine International ScreedSaver machines are versatile screeding machines used throughout the world.

• Flat, slope and dual slope slabs via laser control • Contoured slabs via 3D GPS Satellite control • Screed on poly, heat tubing and styrofoam with ease • Screed on wire mesh and rebar without damage • Superflat screed heads - world class FL/FF results • Roller heads for pervious and topping slabs ForConstructionPros.com/12003925

QUALITY SURVIVES WISCONSIN BUILT SINCE 1967

MBW, INC

SCREEDING MADE EASY! The EZYSCREED makes light work of screeding any area.

The EZYSCREED’s patented bubble level handle system saves you time because the level is builtin to the handle where you can see it, no more reaching for a level.

The handle also gives you good leverage for screeding large amounts.

Made from lightweight high tensile aluminum to resist bending The EZYSCREED’s multi-ribbed interlocking handle/ clamp system is fully reversible giving you 2 screeds in 1, making it a long life tool.

Available in multiple lengths from 3ft to 12ft (sizes are approx).

M B W, I N C • W W W. M B W. C O M C O M PA C T I O N & C O N C R E T E C O N S T R U C T I O N E Q U I P M E N T

ezyscreed.com ezyscreed@gmail.com facebook.com/ezyscreed

24 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_22-25_Screeds.indd 24

10/15/14 9:52 AM

Arrow-Master F-Series Power Trowels Arrow-Master F-Series power trowels features a heavy-duty direct-drive gear case and lower center of gravity provide consistent, reliable power, with less wobble and side torque, for a smoother, flatter finish with easier handling.

• Features fully-enclosed spider assembly, which protects the blade-arm and pitch-control components, and allows for faster and easier cleanup • Available in 30-, 36-, and 46-in. diameters ForConstructionPros.com/12001103

Toro Power Trowels

Wacker Neuson’s Complete Line of Walk-behind Trowels With 11 models including edging, standard, highhorsepower and variable speed units to choose from, concrete finishers will find the right size and power to fit any job.

• Built to provide extra protection from an out of control spinning handle - a gyroscopic safety sensor detects the motion of the handle and stops the engine before the handle reaches a 45-degree rotation.

• High Horsepower – CT 36 and CT 48 models offer a higher horsepower option that provides better torque for low speed floating and additional weight for those operators who prefer a heavier trowel • Variable Speed – CT 36 and CT 48 models offer a variable transmission system that provides wide speed range (25-200 rpm) for low speed, high torque finishing through high speed burnishing all in one machine • Edging – The CT 24-4A is specifically designed for up the edge finishing •

Toro power trowels feature contoured adjustable handles and a rotating stabilizing ring for precise handling that will deliver a smooth concrete finish. There are four models to choose from and each comes equipped with a Honda engine.

• The Toro Dyna-Clutch safety feature is incorporated into each unit and will stop the blade without shutting down the engine • The PT-36PP and PT-46PP feature Toro’s patented Pro-Pitch blade adjustment system that provides smooth, quick pitch changes to ensure blades are at the optimal angle for a perfect finish ForConstructionPros.com/12002192

ForConstructionPros.com/12002419

Plastic Chair Screed Support System Spin Screed has introduced a new plastic chair screed support system that permits contractors to install flatter concrete faster.

• The plastic chairs, set on rebar, and are used to support vertically, a narrow 2-inch tall steel bar instead of a pipe • The narrow steel bar leaves a small void in the concrete when it is removed, saving the time required to fill the void • Produces a flatter concrete surface ForConstructionPros.com/12003191

Somero CopperHead XD 3.0 Laser-guided Screed Contractors can get laser-guided screed accuracy with the CopperHead XD 3.0 laser-guided screed.

• Cuts concrete to finished grade, screeds it flat and vibrates in one pass • Sets grade automatically • 13 hp engine with electric start motor • 36-in. screed width • Unit weighs 850 lbs.

ForConstructionPros.com/11151571

Now Available!

Screed Support System NEW from Spin Screed, the Screed Support System reduces fill volume by 85% compared to a pipe screed.

Complete Please visit our website

spinscreed.com

to see videos & our complete product line.

888-329-6039

4932 Lake View Drive • Quincy, IL 62305

Rugged 22’ Wide Screed

1,599*

$

+shipping

*prices subject to change

www.forconstructionpros.com/concrete | October/November 2014 | Concrete Contractor

CONC1014_22-25_Screeds.indd 25

25

10/15/14 9:52 AM

Decorative Concrete Trends

Thoughts from a Seasoned DECORATIVE CONCRETE CONTRACTOR

Concrete Contractor caught up with Tom Ralston, of Tom Ralston Concrete to discuss the trends in decorative concrete, the future and his sage advice for contractors looking to expand into this market segment.

By Ryan Olson Given the custom nature of decorative concrete work, what types of projects are your customers asking for?

T. Ralston: Concrete interior floors have been a good selling product over the last five to seven years.

Here in Northern California, the interior floors have radiant heat in the floors. We are pouring concrete over the top of the heating elements and finish these floors in a variety of ways.

We’ve been using our Monet hard trowel finish, a process where we use a misting of water and use small pool trowels to get a lot of color movement and variegation. It makes the floor look almost like an oil painting.

Sand wash finishes have also been popular. We don’t like to do this in the interior spaces, but we do a light sanding with a floor machine to expose the sand and it looks more organic.

What colors seem to be the most popular?

T. Ralston: Overall, I’d say the majority of people are looking for earth tones. These are colors that offer a calm, aesthetic effect. Earth tones are in. However, there is that percentage of folks who want something out of the norm, something flashier — blues, greens, reds.

Floors seeded with glass are also becoming more popular.

One of the largest issues facing the concrete industry is finding qualified laborers. Can you discuss the skill set required to be a decorative concrete contractor?

T. Ralston: Being a concrete contractor in general is a risky proposition because we’re all working with a perishable product. And when you throw decorative components to the mix, i.e. peculiar textures, blends of colors, or acid stains, the risks for this perishable product rise exponentially. It’s imperative the skills and craftsmanship of the people working for you are really high.

Craftsman need to have great handeye coordination, a great feel for their craft. It’s an art to try and predict how much concrete is going to retard or accelerate and you have to try to counter that with chemicals.

That’s not to say being a decorative concrete contractor is the only area that require a skill set. There are lots of skill levels in the concrete industry. If you ride on a machine, or run a laser screed, those are skill sets too.

If a contractor was looking to expand into the decorative concrete segment, what advice would you offer for success?

T. Ralston: Make sure you are prepared! It is a different animal. Lots of concrete contractors test the waters

of decorative concrete and then get out after they see how difficult it is . . . how much money is lost trying to hone in the skills; how fickle and demanding clients can be once the “decorative” component is added. Performing decorative concrete work requires us to have the best finishers and craftsman we can get on site. You need a crew that are artfully minded and have the skill set to address the various challenges that come up on a daily basis.

Polished concrete continues to be popular. Do you see this trend continuing in the future?

T. Ralston: Absolutely. Polished concrete floors will continue to be popular because it’s a cheaper way to produce a floor with low maintenance. The end result looks great and organic. It also looks

26 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_26-27_DecConTrends.indd 26

10/15/14 9:53 AM

At right, a pool deck featuring a photoluminescent component.

Photo Credit: Tom Ralston

modern and something that might be considered a “funky” floor. Even if it has some imperfections, those are “cool” imperfections.

Look into your crystal ball, what do you expect to see in 2015?

T. Ralston: As far as Tom Ralston Concrete is concerned, I see a lot of opportunity for interior floors. It’s a hot market and it’s in our wheelhouse.

We’re good at designing and building, backyard patios. I just wrote a book, “Sculpting Hillsides with Decorative Concrete.” We have clients who seek us out for this type of work.

I see our company continuing to grow its efficiencies and continuing to develop the processes and procedures we have in place and some new, which we are developing so our products can be consistently excellent. We will continue to hone in on what has made us good and what makes us better.

From an industry perspective, we’ll continue to make gains with products that are better and stronger. I think it’s the general call in the industry.

But the big, hot ticket item, is trying to make a cement that does not require burning carbon or fossil fuels to produce. If we could make a “clean” cement that doesn’t produce off-gassing and be green, it would be a billion dollar seller. That’s where the thrust is for some of the brightest minds in the industry. It has the most financial gain. Remember, concrete is the number one building material in the world.

There will be continued developments in different admixtures. I’m experimenting with some different mixtures and designs myself. We’re all developing innovation at different rates of speed, but we’re moving in the same direction. Concrete that is less prone to cracking and deterioration, less prone to curling and less prone to

the other problematic aspects that concrete presents.

Concrete contractors should get involved with their industry associations. The American Society of Concrete Contractors (ASCC) has got a wonderful handle on what is needed for the future. And one of those things is networking. Together we become stronger by sharing information with people who are non-competitors. It allows you to make progress in your company and allows you to share things you have done with this fickle product called concrete. This process also helps to develop the trends in concrete. After a while, you keep doing things differently that work and look great. The more exposure you get and the more people see these new twists on products — and like them — the more likely you are to start creating a trend. Basically, you’re becoming the trend setter!

If we can continue as a group and employ principles that will help us grow and understand what we are really doing, we will have a better capability of getting some new things that will become trends. It’s

Above, the photoluminescent material is ideal for flash, design, and safety.

Photo Credit: Tom Ralston

going to be an industry wide effort and effect. On a related matter, I’m always asking – ‘What are your internal processes to document the information you discover on a particular pour? How have you been noting that and what can you learn from it? Use those principles to become more intelligent and knowledgeable. You see little pockets of this throughout the industry, and we just become better and better.

Ed. Note: Tom Ralston is a third generation, award winning concrete contractor, based in Santa Cruz, California. Ralston was inducted into the Decorative Concrete Hall of Fame in 2011. He has been a frequent speaker at the World of Concrete and his newest book is “Sculpting Hillsides with Decorative Concrete” with Schiffer Publishing. Visit http://www.tomralstonconcrete.com/ to see more.

www.forconstructionpros.com/concrete | October/November 2014 | Concrete Contractor

CONC1014_26-27_DecConTrends.indd 27

27

10/15/14 9:53 AM

Decorative Products & Equipment

Concrete Solutions Metal Fusion Concrete Solutions Metal Fusion epoxy offers residential and commercial floors a seamless, three-dimensional look by adding color and depth to concrete.

• Two-component epoxy system is self-leveling and fast drying • 11 colors • Adheres to any concrete surface ForConstructionPros.com/10535552

Stamp Store - Sedona Acid Stain •

•

Concentrated acid stain line with 10 colors, including the conventional acid stain colors, the more fashionable brown tones and a vibrant blue Normal dilution rate of one to one with water can be increased to as much 10 parts water for increased coverage and more precise color matching

ForConstructionPros.com/10086001

McKinnon McKrete Concrete Overlay McKrete is an acrylic and epoxy cementious overlay material that can bring new life to an existing concrete surface.

• Accepts stencil patterns and colors • Apply at 1/8” and up • Residential or commercial — pool decks, driveways, patios, hotel lobbies, shopping centers, museums and retail stores ForConstructionPros.com/10779325

Rhino Linings FastFloor One-Day Flooring System FastFloor System is a two-component, rapid curing polyaspartic flooring system with chemical resistance.

Formulated with aliphatic chemistry, the FastFloor system is color stable, allowing it to endure UV exposure without color shifts.

• FastFloor’s fast cure allows for quick turnaround time • Under normal conditions, floors are ready for light foot traffic within 2-4 hours and returned to service in 24 hours • An ideal floor coating for warehouses, airplane hangars and laboratories as well as restaurant and hospital floors and high-traffic entryways and lobby areas • FastFloor bonds to virtually all substrates including metals, concrete and fiberglass • Available in three standard colors and can be seeded with 14 standard blends of color flakes or six standard colors of decorative quarts • Standard color flake sizes are ¼” and 1/16” • Custom chip colors and sizes are available on request ForConstructionPros.com/12002177

ChemMasters Gloss Restorer SRT Gloss Restorer SRT restores the original gloss, luster and beauty to weathered decorative concrete sealers.

• Chemically alters dull sealers to produce both long-term protection from water and salt • Intended to be applied over existing sealers that have been dulled due to weathering and UV exposure • Bonds to and chemically alters existing concrete sealer • Environmentally friendly and user safe • Requires no special respiratory equipment and can be used indoors or out • VOC content is less than 350 g/L ForConstructionPros.com/10368963

H&C SemiTransparent Decorative Stains The Semi-Transparent Decorative Stains are a water-based alternative to reactive concrete acid stains.

• Allow contractors to achieve a layered, faux or single-color look • Dilute up to 4:1 with water for color variation • UV resistant, require no neutralization, and can be applied on interior and exterior settings • 16 packaged colors ForConstructionPros.com/10080986

28 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_28-32_DecProd.indd 28

10/15/14 9:55 AM

Etching Stains from QUIKRETE

AGT Photoluminescent Resurfacing System AGT SafetyCoat High Traffic Photoluminescent Resurfacing System features: • A pure polyurea base; 100% solids chemistry (no water – therefore no shrinkage) • Zero V.O.C. (volatile organic compounds) • Excellent bonding to both concrete and worn asphalt substrates • Proprietary AGT Safety-Grade Photoluminescent Pigment • Glow Performance: 10-plus hours after exposure to 10 minutes of sunlight or 20 minutes of daylight • Luminosity Rating of: 250-350mcd/m2 ForConstructionPros.com/12005190

QUIKRETE Etching Stains transform plain concrete into a decorative, marble-like appearance with warm earth tones and unique shading.

It permanently stains concrete in one step and is ideal for interior rooms, patios, porches and driveways.

• Available in Tan, Coffee, Black, English Red, Olive • The stains cost approximately $45 per gallon bottle, or about .25 cents per square foot • One bottle provides 100-400 sq. ft. of coverage depending on the porosity of the concrete surface ForConstructionPros.com/12002901

Padco NanoFlock Applicators Introducing Padco NanoFlock Applicators, finish applicators made with the thinnest flocked foam available. Manufactured with Padco’s special flocking technology, NanoFlock Applicators apply a tight layer of finish without rolling or spraying.

• Ideal for jobs requiring lithium, highgloss finishes, and densifiers • For bubble and streak free application, NanoFlock ensures a smooth, thin finish without spray, or the noise and mess from a mechanical sprayer • Available in 2”, 4”, 6” and 9” sizes • NanoFlock Applicators and Trim Pads are also available ForConstructionPros.com/12005326

H&C® Micro-Topping is a polymer modified, thin, cementitious topping ideal for interior applications.

Micro-Topping is designed for horizontal surfaces and can be used in conjunction with H&C Decorative Stains and Clear Sealers to create a unique architectural smooth finish.

• Can be applied in a single coat application, saving time and money • Can be used in conjunction with H&C stains to achieve a variety of unique colors and finishes • Durable and cost-effective solution to replacing old, worn concrete • Finely blended aggregate for a smooth, aesthetically pleasing finish • Single component formulation requiring only the addition of water making it easy to use

MICRO-TOPPING

Imagine the possibilities of concrete

System shown: • H&C Micro-Topping - 2 coats • H&C Semi-Transparent Stain Tumbled Stone • H&C High Performance Industrial Clear Coat

A comprehensive line for all your decorative concrete needs.

For more product information, visit www.hcconcrete.com or call 1-800-867-8246

Scan the code to sign up for our e-newsletter!

www.forconstructionpros.com/concrete | October/November 2014 | Concrete Contractor

CONC1014_28-32_DecProd.indd 29

29

10/15/14 9:55 AM

Decorative Products & Equipment BASF introduces MasterLife CRA 007

•

BASF announces a unique crack-reducing admixture technology, MasterLife CRA 007, which enhances the aesthetics and long-term durability of concrete by reducing the likelihood cracking will occur and, if it does, minimizes the crack width.

• A shrinkage-reducing admixture that produces a maximum initial crack width of 175mm (.007 inches) in high-performance, crack-prone (HPCP) concrete mixtures tested with ASTM C1581 test method

•

•

Crack widths this small do not transport water and have the potential to self-heal over time, thus increasing concrete durability Will meet ASTM C494, Standard Specification for Chemical Admixtures for Concrete, Type S, Specific Performance Admixtures.

MasterLife CRA 007 admixture is part of the Master Builders Solutions portfolio of products for the construction industry

ForConstructionPros.com/11302748

GFRC/FRC/ECC

Admixture FOR THE MANUFACTURE OF HIGH PERFORMANCE, THIN SECTION CONCRETE • Single dose Polymer blend that helps eliminate shrinkage/ pinholes & curling

ARDEX SD-T Self-Drying, SelfLeveling Concrete Topping Provide a hard, flat, smooth surface for warehouses, utility rooms and light manufacturing. Install over: concrete and nonabsorbent substrates such as terrazzo, ceramic and stone tiles • Packaging: 50 lb (22.7 kg) • Coverage: 25 sq. ft. per bag at 1/4” (2.3 m2 at 6 mm)

• Improves PSI/flexural strength & color dispersion • Pre-blended powder, no freeze, rot or mold problems

ForConstructionPros.com/12005317

• Eliminates the need for a 7 day wet cure • Spray up or add Trinic Plasticiser for direct cast SCC • No Licensing or steep Pre-blended bag costs

Concrete Solutions for Your Concrete Needs

youtube.com/user/trinicllc

PROUD SUPPORTER

800-475-1975

www.trinic.us

info@trinic.com

Butterfield Appalachian Flagstone Stamp Pattern Butterfield Color’s Appalachian Flagstone stamp pattern provides a variety of stone textures, a wide array of stone shapes and sizes and crisp rolling grout lines.

ForConstructionPros.com/11293925

30 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_28-32_DecProd.indd 30

10/15/14 9:55 AM

MiraPrime Aqua-Blok XL

•

MiraPrime Aqua-Blok XL is a clear, single component, odorless, water-based, penetrating colloidal silicate liquid primer that integrally waterproofs concrete, mortar and other cementitious structures.

• Deep penetration into concrete substrates 2”- 4” • Water thin micro-crystalline technology - penetrates fast • Purges/expels embedded chlorides and blocks re-entry • Enhances concrete physical properties - maintains breathability • Significantly reduces migration of efflorescence

• •

• • • • • •

Application from positive or negative side Significantly reduces moisture vapor emissivity Hydrophilic moisture barrier - resists hydrostatic pressures Permanent and self-healing integral waterproofing Enhanced protection of reinforcing steel to corrosion Meets USDA standards for non-incidental food contact Will not sustain mold, mildew or fungal growth Non-toxic, low odor and environmentally safe Cures, seals, densifies and hardens new/existing concrete

ForConstructionPros.com/12004332

Helix Architectural Color Hardener ChemSystems, Inc., introduces Helix Architectural Color Hardener, a dry shake surface color hardener containing reflective aggregate designed to produce an elegant and refined light exposed colored concrete surface. All-in-one product that combines the benefits of color hardener with specialty selected and graded reflective aggregates.

• Available in six standard colors with three different reflective aggregates (glass, mirror and carbide). Custom colors or aggregates are available upon request • Long range benefits include increased service life of the concrete, increased light reflectance, increased coefficient of friction reducing slip issues, and increased aesthetic value from colored concrete ForConstructionPros.com/12008183

Increte Level Top Level Top SP is a self-leveling concrete overlay that can be integrally colored or stained and is polishable.

• For use on new or worn concrete • Walkable/ stainable in 4 hours; polishable in 24 hours • Dries to a light gray finish • Available in 50-lb. bags, which offers coverage of 40 sq. ft. at 1/8 in. or 20 sq. ft. at 1/4 in.

ForConstructionPros.com/10897587 www.forconstructionpros.com/concrete | October/November 2014 | Concrete Contractor

CONC1014_28-32_DecProd.indd 31

31

10/15/14 9:55 AM

Decorative Products & Equipment Engrave-A-Crete Introduces the Spiider

Buddy Rhodes Furniture Molds

Engrave-A-Crete, Inc. introduces the Spiider, the decorative concrete engraving tool that combines track-free cutting with maneuverability to execute freeform artistic cuts.

• Swivel steering arm gives maximum control during free-form artistic cuts • Dynamic directional wheels for the flexibility to maneuver tight curves • Flip-up front pointer for easy alignment with chalk lines • 10,000 RPM motor specifically tuned to match the 79 mm blade resulting in more torque while cutting and less kerf ramp when ending cuts • Built-in vacuum with an impact shield to slow debris and channel it into the vacuum • Premium diamond blade cuts hairpin curves or straight lines without increasing kerf width or raveling the concrete.

ForConstructionPros.com/11360958

This line of fiberglass molds for decorative concrete projects includes tables, stools, planters and a lounge chair.

• Lightweight, durable and reusable for hundreds of applications • Suitable for casting onsite or in the shop • Available with a variety of surface options ForConstructionPros.com/10077453

Tru Tique Color Solution Tru Tique water-based antiquing color wash solution provides a natural, two-tone mottled effect for coloring new or existing textured surfaces.

• Provides contrast by running off the high spots and settling in the low areas • Multiple colors may be used for more effect • 16 colors available • Coverage: approximately 1,500 to 3,000 sq. ft.

ForConstructionPros.com/11297867

Your customers recommended daily allowance of

BEAUTY enCOUNTER is perfect for clients who like to wake up to beauty in their own homes.

It allows contractors to sleep well at night knowing they have provided their customers with a daily dose of “exactly what the customer wanted”.

So look no more, the search is complete. enCOUNTER is the perfect dose of customer satisfaction.

discover all the benefits at

encountertop.com

Call today to find a distributor or to become a distributor: 866-906-2006

32 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_28-32_DecProd.indd 32

10/15/14 9:55 AM

Polishing Products & Equipment MK-SDG Single Disc Grinders •

• • • • • •

Three single disc grinder models: SDG-13, Honda Propane; SDG-11, Honda Gas; and SDG-3, Baldor Electric 10- or 20 segment 10-in. diameter diamond grinding Two-position wheel carriage Front taper for enhanced visibility Removable nose weight Dust shroud to contain grinding debris For use on concrete slabs, terrazzo, ceramic tile floors, brick and stone

ForConstructionPros.com/10082101

CONTRx Systems The Edge Polisher

Ameripolish SureLock Color System The Ameripolish SureLock Color System is a threepart system engineered protect color in polished concrete from moisture, ultraviolet radiation, stains and etching agents.

• The three parts - SureLock Dye, SureLock Densifier and SureLock Stain Protector - are designed to work together, chemically bonding to the concrete and each other • UV stabilizer in the dye provides additional color protection • The densifier is a proprietary, lithium-based densifier/hardener • Stain protector provides an additional application of UV stabilizers ForConstructionPros.com/10083470

MQ Whiteman Finishing Solutions - SlabArmor and FirstPolish Multiquip’s Whiteman products are recognized for equipment that helps contractors produce superior concrete floors. The new line of finishing solutions complements Multiquip’s power trowel lineup. MQ Whiteman SlabArmor and FirstPolish products will enable contractors to finish concrete to a higher level of refinement while creating a denser more consolidated slab surface.

• SlabArmor and FirstPolish are products applied through the finishing process • Improve the durability and life expectancy of the finished slab • Produce a highly refined surface

ForConstructionPros.com/10092842

ForConstructionPros.com/11308279

Diamatic BMG-735PRO Planetary Grinder The BMG-735PRO Planetary Grinder is an industrial-grade polishing and grinding machine.

• Use wet or dry • Three-head planetary design with a separate drive system for the main drum and the 9-in. planetary disks • 28-in. grinding path • Floating shroud with brush skirt for dust control; can also be connected to a dust collector • 230/480V motor • Variable speed control for tooling speeds of 240 to 1,100 rpm ForConstructionPros.com/10311062

The Edge polisher from CONTRx Systems polishes or grinds concrete tightly against vertical surfaces and around columns or other tight areas.

• 7-in. working width • Can polish/grind 500 to 700 lineal ft. per hour • Four-position handle • Electric and gas models available

UltraGrind Concrete Grinding Machine

Aztec’s UltraGrind is a propane powered, planetary head, gear driven concrete grinding and polishing machine for concrete floors.

• Designed for both material removal and highly polished concrete floors • 40 lbs. of head pressure per diamond abrasive • 2-in. exhaust ports • 8-gal. water tank • 20-hp Kawasaki 603cc engine with heavy-duty canister air filter • CE, EPA/CARB, LEED and GS-42 certified ForConstructionPros.com/10184434

www.forconstructionpros.com/concrete | October/November 2014 | Concrete Contractor

CONC1014_33-43_PolProd.indd 33

33

7/8/15 11:29 AM

EPOXY | METALLICS | NATURAL STONE | OVERLAY | POLYASPARTIC | URETHANES | SEALERS

Industrial Epoxy

INDUSTRIAL EPOXY— Contains an additive in the Resin to make it harder and an additive in the cure to make it chemical resistant. Our Industrial Epoxy can be tinted to a color of your choice for that ideal concrete coating color match.

Aurora Epoxy Dust

AURORA EPOXY DUST— Intended for use as a metallic epoxy floor system, countertop system, or other horizontal surface to create one of a kind unique designs to enhance any epoxy floor coating. Aurora Epoxy Dust has many advantages over other concrete coating methods. Unlike acid stains and standard coloring methods, the pigments in this metallic epoxy reflect light rather than absorbing it, creating incredible depth and dimension.

Chromastain

Aurora Epoxy Dust

CHROMASTAIN— An environmentally friendly water based stain designed specifically for porous substrates including concrete, acrylic and concrete overlay systems. It penetrates, adheres to the surface and is self-sealing. Base color blending allows for hundreds of color shades. The varied color combinations and creative designs make this product ideal for both outdoor and indoors.

CONC1014_33-43_PolProd.indd 34

7/8/15 11:29 AM

Crystal Coat

CRYSTAL COAT— A sealer that enhances the color intensity of pavers while providing a fortified, protective shield. Its strength and durability as to wear/abrasion resistance, substantially decreases routine cleaning and maintenance costs while forming a penetrating, locked in place bond.

Specifically formulated, to withstand the harsh forces of Mother Nature and continuous UV rays of the sun. At $93 for 5 Gallons, Crystal Coat is an inexpensive paver saver solution! Given that it is highly concentrated, it is meant to be extended through the addition of 50% water. Why pay extra for water?

Protect investments made in pavers with Crystal Coat today and relax and enjoy the savings and curb appeal for years to come.

Stone Bond Epoxy

STONE BOND EPOXY— Epoxy Bonded Stone is a custom blend of our epoxy and natural stone. It is the only overlay product that has been proven to increase the strength of the sub-base. It is also durable in all weather conditions from subzero to tropical, and is designed to bear heavy loads, including automotive traffic. Standing water is eliminated because Natural Stone is porous.

Water drains through making it the perfect product for pool decks, balconies, and driveways.

Deck Coat Overlay

CONTACT US TODAY! McKrete™

DECORATIVE OVERLAYS— McKrete™

www.mckinnonmaterials.com TOLL FREE: 1-866-622-7031

and Deck Coat Overlay

Available in an infinite number of colors, patterns and textures to compliment any décor. Both are extremely durable and stain resistant.

CONC1014_33-43_PolProd.indd 35

Visit us on Facebook

7/8/15 11:29 AM

Polishing Products & Equipment

GelMaxx Eco-QuickGel

PDG 8000 Planetary Diamond Grinder

Kut-Rite Conquer20 SS Concrete Grinder-Polisher

SASE Company now offers the PDG 8000 Planetary Diamond Grinder, with a 20-hp motor and an ergonomic design.

• Three counter-rotating heads offer planetary grinding that contours to the surface in a 30-in. grinding path • Heads adjust from rigid to flex and the unit comes with both QCS and flex plates • The grinder connects to the SASE BULL 1250 dust extractor for dust-free operation • The unit weight is 1,050 lbs. and accepts up to four additional 50-lb. weights.

The Conquer20 SS grinding and polishing machine can be converted into a countertop grinder/polisher.

• 210 lbs.

• Designed for the typical residential contractor • Users can switch between planetary and rotary grinding • Can be broken down by hand and transported in the back of an SUV • Wet and dry uses • Belt-Drive System and Quick Disconnect (QD) Tooling • Tilt-Back Bowl design offers quick, safe and easy tool changes • Specific new packaging designs allow the unit to be shipped via UPS or Fed Ex

ForConstructionPros.com/10226372

GelMaxx ECO-QUICKgel is a super absorbent powder that works quickly to turn concrete slurry, or any liquid waste, into a dry material that is safe to dispose in any standard trash can.

• Creates a hassle-free cleanup process • Can absorb up to 500 times its weight in liquid • EPA compliant • ECO-QUICKgel is able to treat wastewater for concrete grinding, polishing, cutting, coring, masonry, and more

ForConstructionPros.com/10877349

ForConstructionPros.com/11173620

H&C CLEAR LIQUID HARDENER & DENSIFIER • Densifies and hardens new and existing concrete • Penetrates and reacts with concrete faster than conventional systems • Minimizes labor costs - is easy to apply, polish & maintain H&C LITHIUM PROTECTIVE FINISH • Protects polished concrete • Increases concrete hardness and improves stain resistance • Provides high gloss reflectivity when burnished

SUPERIOR POLISHING PRODUCTS FROM H&C® DECORATIVE CONCRETE Imagine the possibilities of concrete.

ADD COLOR WITH H&C ACETONE DYE STAINS • Available in 16 packaged colors • Colors can be inter-mixed to achieve even more colors • Dry to touch in 20-40 minutes • Perfect for polished concrete or existing substrates

A comprehensive line for all your decorative concrete needs.

For more product information, visit www.hcconcrete.com or call 1-800-867-8246

Scan the code to sign up for our e-newsletter!

36 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_33-43_PolProd.indd 36

7/8/15 11:29 AM

SCANMASKIN OWNERS DO IT IN AN HOUR. With other grinders, a belt change is an all-day affair that costs you big on downtime and lost productivity. What’s worse, a lot of those belts fail after just 1,000 hours.

Who can afford to waste time and money like that?

You can change the belt on a Scanmaskin floor grinder in just 60 minutes.

Yep. Just one hour. Plus, each Scanmaskin belt is rated for up to 5,000 hours.

PACKAGE DEAL SCAN COMBIFLEX 650 FLOOR GRINDER +

ERMATOR S36 DUST COLLECTOR & C3000 PRE-SEPARATOR

SPECIFICATIONS: SCAN COMBIFLEX 650 « Productivity rates of 650–970 feet 2/hour « 230V, single phase « 3-head planetary drive system; holds 9–18 tools « Low-vibration design « Solid steel construction—right down to the dust shroud « Weighs 705 pounds

ERMATOR S36 « 230V, single phase « Three tested and certified HEPA filters « 353 CFM « 110 inches of water lift « Mess-free drop-down dust collection

ERMATOR C3000 « Captures 90% of dust and debris « Extends life of dust collector filters « Longopac dust-free disposal

Longer belt life. Less maintenance. Scanmaskin machines are built to WORK, not to be worked on.

Find out what else sets Scanmaskin machines apart at www.jondon.com/scanmaskin. *Based on a 60-month lease.

800.556.6366 www.jondon.com

CONC1014_33-43_PolProd.indd 37

7/8/15 11:29 AM

Polishing Products & Equipment

Lavina 13N-S edger Lavina 13N-S edger from Superabrasive is an edger, designed to grind and polish corners and edges with ease – no more lines. The machine features: • 13-in. grinding head and a 5 hp motor (220V) • A level on the head to check the flatness of the floor during work • A new gauge to control the angle of the head against the floor, and to blend edge work evenly • Forward/reverse option • Rollers to prevent the head from damaging walls ForConstructionPros.com/12004210

StoneEdge Pit Grout

STI Hat-Trick Planetary Machines

StoneEdge is a polishable tinted grout coat that also accepts polishing dye. When used properly, it increases reflectivity by filling air voids, small pop outs and pitted areas in finished concrete and terrazzo floors.

• StoneEdge Pigment Packs can be added to StoneEdge Grout Mix to create custom colors • 18 different pigment colors to choose from

The new Hat-Trick planetary concrete polishing machines are available in two sizes: the 31-in./800mm model 800 and the 19.6-in./500mm model 500.

• Ideal for light duty grinding and high capacity polishing • Use on concrete, marble, terrazzo and granite • Soft-start and variable speed control • Run wet or dry

ForConstructionPros.com/11191533

ForConstructionPros.com/11230617

STAYED IN AMERICA

EVERYTHING YOU NEED

TO KNOW ABOUT SURFACE PREPARATION, RESTORATION,PROFESSIONAL SAWING EQUIPMENT AND HAND HELD TOOLS

2DP - ProPolisher II with 290 CFM Vacuum

Visit us online or call for more information 1-800-638-3326 • contrxsystems.com • edcoinc.com

38 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_33-43_PolProd.indd 38

7/8/15 11:30 AM

Scanmaskin Concrete Floor Grinders from JonDon Scanmaskin concrete floor grinders are engineered to put more torque on the floor, not your hip. The result is a more productive grind with less vibration and less stress on the operator.

Scanmaskin machines also feature: • All-steel construction — right down to the dust shroud • Belts are rated at up to 5,000 hours and can be changed in an hour ForConstructionPros. com/12003968

HTC Releases Greyline HTC has released the new and improved HTC Greyline, a line of simple and easy to use floor grinding equipment, diamond tooling and accessories for contractors and DIY. • Ideal for floor preparation, coatings removal, concrete grinding, concrete leveling and wood refinishing • Greyline consists of floor grinders, dust extractors, pre-separator, diamond tooling and an edge kit • All HTC Greyline equipment operates on single phase 230v or 110v power • The equipment line has been electrically enhanced to work on a broader range of power including Ground Fault Circuit Indicators (G.F.C.I.) outlets ForConstructionPros.com/11442092

ARDEX PC-T Polished Concrete Topping ARDEX PC-T Polished Concrete Topping is a self-drying, self-leveling, cementbased topping base for floors that will receive a polished concrete surface.

• Installs from 3/8 to 2 in. and up to 5 in. with the addition of aggregate • Hardens fast due to unique self-drying formulation – can be polished in as little as 24 hours • Smooth new or existing concrete and certain non-porous surfaces • Walk on as soon as 2 hours • Designed for use with ARDEX Polished Concrete Systems • Available in 50-lb. packaging ForConstructionPros.com/11189244

www.forconstructionpros.com/concrete | October/November 2014 | Concrete Contractor

CONC1014_33-43_PolProd.indd 39

39

7/8/15 11:30 AM

Polishing Products & Equipment Ultratop PC High-Performance, Polishable Concrete Topping Ultratop PC is a highflow, quick-setting, selfleveling, cementitious topping optimized for diamond polishing.

• Suitable for both interior and exterior use • Designed to be applied at depths of 3/8” to 2” (10 mm to 5 cm) thick.

• Cures quickly for fast-track resurfacing and polishing of concrete floors.

• Suitable for application in high-end residential locations, retail stores, warehouses, schools, kitchens, airport hangars and loading docks.

• Polishable in as – soon as 24 hours • Suitable for both new and existing interior and exterior floors • Maximizes the brilliance of natural gray concrete floors when polished • Will accept both light vehicular and foot traffic in commercial, light industrial and residential applications • Suitable for areas of constant water exposure ForConstructionPros.com/11302272

NEW & IMPROVED WITH Husqvarna PG 450 Grinder

www.pulsebac.com © 2014 - 9384 Ridgeview Tulsa,OK 74131 • 866-954-9700

The PG 450 grinder is Husqvarna’s smallest planetary grinder/polisher that can be used for concrete grinding, coating removal, concrete repair and polishing.

• Planetary drive • Runs on single phase power • Husqvarna Redi Lock for easy changing of diamond tools • 7-in. grinding discs • Fixed speed • Equipped with hour meter • Self-adjusting floating cover with brush lists follows the surface of the floor and creates a tight seal for dust management • Handle bar on frame adjusts • Frame folds and can be wheeled around • Chassis/frame can be separated from grinding head in less than 30 seconds • Grinding width: 18 in.

• Grinding pressure: 152 lbs.

• Grinding speed: 705/575 rpm • Weight: 240 lbs.

ForConstructionPros.com/12001410

40 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_33-43_PolProd.indd 40

7/8/15 11:30 AM

by

DIAMOND TOOLS FOR FLOOR PREP, POLISHING AND MAINTENANCE STARTING OCT. 1, 2014

QuickChange

NATO速

Calibra

V-HARR速

ShinePro速

WE GRIND. WE POLISH. BETTER.

SUPERABRASIVE INC. (800) 987-8403 www.superabrasive.com info@superabrasive.us CONC1014_33-43_PolProd.indd 41

7/8/15 11:30 AM

Polishing Products & Equipment SCOFIELD Selectseal Plus

LATICRETE Durafloor TGA

L. M. Scofield Company announces the release of SCOFIELD Selectseal Plus, the latest addition to its environmentally-friendly, sustainable concrete systems. Selectseal Plus provides wet-slip resistance while forming a tough abrasion- and stain-resistant gloss finish.

• Low-odor, self-crosslinking, urethane fortified acrylic concrete sealer designed to protect interior uncolored or previously stained concrete surfaces.

• At its natural spread rate of 400 sq. ft. per gallon, this high-solids product is capable of delivering a full 1.0 mils of protection • Proprietary nanotechnology enables slip resistance even when wet • Certified to meet UL 410 for Slip Resistance of Floor Surface Materials • Can meet ANSI, ASTM and NFSI traction standards • Applied by traditional, foam, microfiber, or lamb’s-wool applicators, as well as by conventional, air-assisted, airless, or HVLP spray equipment • Tested and approved for use over LITHOCHROME Tintura Stain, LITHOCHROME Chemstain Classic, LITHOCHROME Color Hardener, SCOFIELD Formula One Liquid Dye Concentrate, SCOFIELD Texturetop and SCOFIELD Revive Color Refresher, where a gloss finish is desired and local air quality regulations prohibit the use of products containing more than 100 grams per liter of volatile organic compounds (VOC) • Available in one gal. cans and five gal. pails

LATICRETE L&M Construction Chemicals’ Durafloor TGA is a decorative, exposed aggregate, polishable wear topping for concrete surfaces. It combines the durability of concrete with color and decorative aggregate to product a high-performance floor with enduring beauty.

Durafloor TGA gives you: • A highly polished surface • Built-in permanent color and texture • Concrete with color and custom aggregate

ForConstructionPros.com/11393203

ForConstructionPros.com/11230650

ForConstructionPros.com/12002600

T Meter The T Meter is the industry’s first measurement device for reading concrete surface texture.

• Reads concrete texture in three parameters: STG – Surface Texture Grade as described in CSDA Standard ST-115, Ra – Roughness Average, and CSP – Concrete Surface Profile 1-6 as defined parameters of ICRI CSP profiles • Mobile design

GRIND. HONE. The Newest Innovation for POLISH. Polishing Uneven Edges FINISH. THE FLEXIBLE COMPANION TO THE EASY EDGE POLISH WAVY EDGES & DRAINS UNIQUE FLEXIBLE DESIGN EASY TO USE SUPERIOR FINISH EdgeFlexTM is designed for hard or soft concrete. It is used with a and polish wavy or uneven edges, drains, and low leaving a beautiful on concrete counter tops.

SIZES: 5” & 7” GRITS: 30 - 400 2615 Aero Park Drive | Traverse City, MI 49686 231.929.2121 | 800.662.0336 PROUDLY MADE IN THE USA

Use with most hand grinders Order Online at BSDDiamond.com info@BSDDiamond.com

42 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_33-43_PolProd.indd 42

7/8/15 11:30 AM

Blue Star Diamond Premium 4 Segment Diamond for Hard Concrete

Scanmaskin Scan Combiflex 800 Propane Grinder The Scan Combiflex 800 Propane grinder is designed for high productivity in large areas with no need for external electrical power.

• 20-lb. propane tank • Standard water valve inlet • Minimizes side torque and stress on operator • Ergonomic design reduces vibrations • 25-hp motor • Speed: 550 to 960 / min • Grinding discs: 3 by 9.5 in.

• Grinding width: 32 in.

• Weight: 970 lbs.

Blue Star Diamond by BORIDE Engineered Abrasives introduces the Premium 4 Segment, a diamond specially designed to cut through the cream of very hard concrete. The unique design allows the diamond to penetrate deep into the cream, opening up the floor and allowing the diamond to keep cutting when most metal bond diamonds fail.

• Available in 30/40, 60/80 and 120/140 grits, with Velcro and with Velcro and boss • Run wet or dry on most small, medium and large planetary and rotary machines

ForConstructionPros.com/11298987

ForConstructionPros.com/11272625

HD24 Pre Grind HD24 Pre Grind is a gelled acid concrete etching product that removes contaminants and top laitance and leaves a 100-80 sand paper grit profile.

• Use as a pre-grind for polished concrete floors and when an aggressive opening is needed • Increases slip resistance • Generates no silica dust or noise pollution and contains no VOCs • Neutralizes with water and is flushable to sewers • 1- and 5-gal. containers with 300 to 350 sq. ft. coverage per gal. on smooth surfaces • 24% acid ForConstructionPros.com/10313604

TF: 877.786.5067 PH: 734.955.9311 www.kutritemfg.com

No matter how you kut it.

Born, bred and manufactured with tradesmen input and in mind of the need for flexibility and durability on your jobsite.

with Reverse Flow Technology

www.forconstructionpros.com/concrete | October/November 2014 | Concrete Contractor

CONC1014_33-43_PolProd.indd 43

43

7/8/15 11:30 AM

Dust Extraction

New Silica Dust Regulations -

ARE YOU READY?

OSHA’s proposed new PEL for silica will significantly reduce exposure, but it will also place stricter controls on operations that produce silica dust.

By Ben Kruse

I

magine your lungs slowly turning to stone, each day you can take in less and less air until finally you can’t breathe at all.

That situation can be very real for people who have diseases caused by silica dust and in the construction industry, silica dust is everywhere. OSHA has taken data from decades of research on worker exposure to silica dust and made the determination that the current permissible exposure limit (PEL) is no longer sufficient. In response, OSHA has proposed a new PEL for silica that will significantly reduce exposure. This of course comes at a price with stricter controls on operations that produce silica dust. As with past regulations of this type there has been strong resistance from industry. Silica being present in a large variety of construction materials hearing conducted in March 2014 saw comments coming from many facets of the construction industry.

Right now the rule is in the proposed stage. OSHA Assistant Secretary Dr. David Michaels recently stated that work on the agency’s proposed standard is “actually moving quite well” and he expects the standard to be finalized in 2016. Below you’ll find more information about silica dust and how it may affect you, so you can be ready.

Silica dust and your health According to OSHA silica dust exposure can significantly increase the risk of lung cancer, silicosis, and non-malignant respiratory

disease (NMRD) as well as autoimmune and renal disease. Most of the diseases are incurable and are fatal. Looking at that list should be enough to put safety in the forefront of your mind, but why is it believed to cause such catastrophic illnesses.

When materials like concrete or masonry are ground, cut or polished, they produce large clouds of dust. What most people don’t realize is that while the dust cloud is messy it’s not that dust that is really the biggest health risk.

It’s the microscopic dust that you can’t see that can hang in the air long after the cloud has cleared. The reason the microscopic dust presents such a risk is that the small particles can travel deep into the lungs and stay there. This is because they’re too small for the body to process out, but big enough to irritate tissue deep in the lungs.

The other important factor to realize is that most of these aliments don’t present directly after exposure and are generally the result of exposure over time. So it’s workers who are consistently and repeatedly exposed that can face the worst consequences.

The new rule

OSHA’s current standards for silica dust were adopted in 1971 and haven’t been updated since. The

The new rule means you’ll need a HEPA-rated vacuum for clean-up; in order to conform to the new PEL rating.

Photo Credit: CDCLarue

previous standard is a formula that is approximately equivalent to 100 micrograms per cubic meter of air (mg/m3). The new rule would change that standard to 50 micrograms per cubic meter of air. This will make the PEL equivalent to that of the well known EPA RRP rule, known as the Lead Paint Rule. This will mean a big change for the industry overall. Current methods of grinding, cutting, drilling and other operations may have to change how they’re done.

44 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_44-50_DustSurfSaw.indd 44

10/15/14 9:59 AM

Surface Prep & Dust Extraction Steam Jenny Direct-Drive Cold Pressure Washers

What this may mean for your business

•

The PEL rating brings with it requirements to maintain the PEL of which you need to be aware. Chief among these may be this statement, “ The proposed rule prohibits the use of compressed air and dry brushing or sweeping for cleaning of surfaces and clothing . . . and promotes the use of wet methods and HEPA-filter vacuuming as alternatives.” This means you’ll have to have a HEPA-rated vacuum for clean-up; which means you will also need one for use with grinders and other tools in order to conform to the new PEL rating. It also appears that wet methods may not be as simple as they once were, as the slurry would need to be removed, contained and not allowed to dry in place.

HEPA vacuum filtration is a good alternative for most operations and is a simple way to maintain the PEL rating. The new rule will also require the vacuum you use to maintain a minimum cubic feet per minute (cfm) when in use. Look at the following statement from OSHA about dust collection for grinders in the proposed rule. “The dust collector must be equipped with a HEPA filter and must operate at 25 cfm or greater airflow per inch of blade diameter.” Notice that it says ‘must operate at’. That means if you’re using a 6-in. cup wheel, you will need a vacuum that draws 150 cfm in a sustained manner to be compliant, not a vacuum that starts at 150 cfm, and then slowly loses cfm (suction) as the filter clogs. Dust vacuums like the Pulse-Bac with automatic filter cleaning capabilities will become the norm, as contractors will not be able to perform the work without them. These types of vacuums prevent the filters from clogging and the vacuum from losing cfm while operating.

There’s no doubt that with a newly written regulation will come a newly reinvigorated scrutiny on the jobsite. So be ready for it when it comes. As you look at new equipment make sure it will be able to handle silica dust in the right way. Make sure saws and grinders come equipped with dust shrouds or can be fitted with effective after-market shrouds. Be sure vacuums are HEPA rated and capable of maintaining sustained cfm and lift. This way these new regulations will be old news to you and the transition will be easy. Not only that, the dangers of silica dust can be a real threat to your health and/or the health of your workers. Taking action to curb exposure will have real benefits aside from avoiding possible fines.

Ed. Note: Ben Kruse is the Marketing and Media contact at CDCLarue.

He can be reached at BenKruse@cdclarue.com.

•

•

•

•

•

Four new models Powered by 9- or 13-hp Honda GX Series engines Triplex ceramic plunger pump Pressure ratings between 3,000 and 4,000 psi Flow rates between 3 and 4 gpm Thermal pump protection, unloader valve and high pressure relief valve

ForConstructionPros.com/10080142

SP8/GH Surface Planer General Equipment Company’s SP8/ GH surface planer is ideal for a wide range of job applications, including milling misaligned sidewalks and joints, removing thermo and cold plastic markings and prepping floors for new coating applications.

• 5-hp Honda 4-stroke gas engine • Heavy-duty, welded steel-plate frame • Maximum cutting depth: 5/8 in.

• Maximum cutting width: 8 in.

• Precisely balanced for maximum operator control ForConstructionPros.com/12001495

FS351 Self-Propelled Surfacer Scarify, plane, shave, groove and prep with the FS351 Self-Propelled Surfacer from SMITH Manufacturing Company.

• Re-designed the all-steel chassis with flexibility for use alone or with your equipment • Lockable depth-control settings for consistent removal in the “impact zone” • Up to 2x faster removal speeds with adaptable changes for diamond shaving, roto-planing or carbide scarifying • Re-designed vacuum pickup location to contain debris • Lower vibration and extended bearing life • New lifting carriage with heightadjustment lever • Fewer moving parts to increase uptime • Available in gas, propane and electric models ForConstructionPros. com/12002905

www.forconstructionpros.com/concrete | October/November 2014 | Concrete Contractor

CONC1014_44-50_DustSurfSaw.indd 45

45

10/15/14 9:59 AM

Surface Prep & Dust Extraction Ermator T8600 Propane Dust Extractor

NLB Water Jet Lance The NCG24-535 water jet lances from NLB Corp. are rated for applications requiring operating pressures of up to 24,000 psi (1,656 bar) and designed to reduce the chance of hose or fitting failure. The new lances reduce stress on the inlet connection by eliminating the bend radius in the hose that supplies high-pressure water. Instead, an inlet tube with a 90-degree bend and a safety shroud surrounds the hose where it attaches to the lance. The NCG24-535 water jet lance is also available in a dual-trigger version (NCG24-535DT) and an underwater version (NCG24-535UW).

The NCG24-535 features: • One-finger latch to prevent accidental actuation • Patented trigger that immediately dumps pressure when the operator pushes it forward • NLB quick-change cartridge seal can be replaced in the field in 60 seconds • Aadjustable shoulder stock and hand grip • The lance weighs just 12 lbs. (5.5 kg) with its standard 36-inch barrel. Longer barrels are available • Complies with WJTA-IMCA recommended practices • Color-coded handle identifies the lance’s operating pressure ForConstructionPros.com/11447804

ARDEX K 15 Premium Self-Leveling Underlayment Portland cementbased, self-leveling underlayment designed specifically for the fast leveling of floors. ARDEX K 15 is recommended and specified by many quality flooring manufacturers, architects and contractors.

Install over: interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems, wood, metal and non-water soluble adhesive residue on concrete; can be installed over concrete treated with certain curing compounds.

• Packaging: 55 lb. (25 kg) • Coverage: 30 sq. ft. per bag at 1/4” (2.8 m2 at 6 mm) • Can be tapered to meet existing elevations ForConstructionPros.com/12005312

Control dust on concrete grinding projects without electricity with the new T8600 Propane dust extractor.

• 18 hp Kawasaki motor with a direct-driven turbine • 410 cfm and 115 in. of water lift • Individually tested and certified HEPA filters • Coated polyester pre-filter socks • Drop-down disposal system • Longopac collection system • JetPulse filter cleaning ForConstructionPros.com/11142296

Makita Expands Line-up of Dust Extraction Solutions Makita has expanded its line-up of dust extraction solutions for concrete contractors with a new Dust Extraction Attachment, model 196571-4, for use with demolition hammers and rotary hammers (accepts SDS-MAX). The new Dust Extraction Attachment is engineered to help reduce dust created from breaking and chipping concrete.

• 6-piece kit for use with a jobsite vacuum (sold separately) • Compatible with Makita SDS-MAX Rotary Hammers and Demolition Hammers • The Dust Extraction Attachment kit and includes a dust cover, hose (62-1/2” long), hose holder for power cord, hose holder for “D” side handle, hose holder for straight side handle, and hose joint (1-7/8” ID, 2” OD) ForConstructionPros.com/11364543

CDCLarue Pulse-Bac HEPA Certified Vacuums CDCLarue’s Pulse-Bac HEPA certified vacuums meet and exceed EPA regulations and can be used in the control and removal of silica, lead, asbestos and more.

• Patented Automatic Pulse-Clean Technology • No blowers, shakers, compressors or buttons needed ForConstructionPros.com/11267405

DEWALT 10 Gallon Wet/Dry HEPA Dust Extractor The DEWALT 10 gallon Wet/Dry HEPA Dust Extractor with Automatic Filter Clean pulses every 30 seconds for continuous operations without stopping to clean filter.

• 15 amp motor delivers 140 CFM of airflow for maximum suction • Power Tool Actuation controls the on/off operations of the vacuum with a power tool • Meets the EPA Lead Related Renovations, Repair and Painting (RRP) Rule for Hepa Vacuum only when DWV9320 Filter is used (Filter included with unit) • Variable Suction controls vacuum’s power consumption and amount of suction • Telescoping handle for easy transport • Universal hose connector provides a robust connection with swivel capability • Lightweight and portable weighing in at only 33.5 lbs.

• Heavy duty wheels and locking casters provide jobsite durability • Simple one switch operation to select tool actuation or vac only • Can be used with wet or dry applications ForConstructionPros.com/12003815

46 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_44-50_DustSurfSaw.indd 46

10/15/14 10:00 AM

Sawing & Drilling HDC200 and HDC250 for SDS-max / Spline and Core Bit Concrete Drilling

Wacker Neuson BTS 630 and BTS 635 Cut-off Saws

The new HDC200 and HDC250 are designed for drilling applications for the larger SDS-max and spline hammers. These flexible systems are universal in nature in that they are not tool specific. These units simply connect directly to a Bosch dust extractor (vacuum), and the air suction through one of the two specially designed air chambers sucks the unit to the wall. The second air chamber allows the drilling bit to pass through for the actual dust collection process.

• These units feature the integrated 1-3/8-in. dust port, which fits the Bosch vacuum nozzle • Dust port adaptors (sold separately) are also available to convert the dust port to either 1-1/4- or 2-in. vacuum nozzles • The HDC200 is designed for a maximum bit diameter of 2-1/2 in. However, it is optimized for drilling diameters from 5/8 in. to 1-3/8 in.

• The replaceable brush ring is flexible enough to provide the proper air seal around these different bit diameters • For diameters from 1-3/8 in. up to 2-1/2 in., the brush ring must be removed • The HDC250 is designed for larger (core bit) diameters up to 6 in., although it is optimized for diameters from 1-1/2 in. up to 5 in.

• The HDC250 also features a replaceable brush ring that provides the proper air seal around these different bit diameters • For diameters greater than 5 in., the brush ring must be removed ForConstructionPros.com/12002325

The BTS 630 and BTS 635S saws feature an air filter concept that guarantees long service life and less down time.

• Unique three-stage air filter system includes a cyclonic filter, foam pre-filter and paper filter • A high-torque, 5.8-hp engine • User-friendly and ergonomic features • The 24-lb. BTS 630 has a 12-in. blade diameter with .08-in. arbor • The 24.5-lb. BTS 635 has a 14-in. blade diameter and 1-in. arbor ForConstructionPros.com/10259688

Stihl GS 461 Rock Boss Concrete Chain Saw The 18.1-lb. GS 461 Rock Boss is suited for plunge cuts, shaping square corners and cutting concrete pipes in trenches, cinder blocks, masonry bricks, asphalt and soft stone.

• Cuts to a depth of 15.7 in.

• 76.5cc engine develops 5.8 hp and 13,500 maximum rpm • Two chain-tensioner mounting holes allow the user to effectively increase the length of the guide bar to compensate for chain stretch • Side-access chain tensioner allows for easy tightening, loosening or changing of the 36 GBM diamond abrasive chain ForConstructionPros.com/10826180

Scan Combiflex 700RC Made of steel and designed for high productivity in large areas, the SC 700 has three grinding heads, which spin in a counter-rotating configuration for increased efficiency and smooth operation.

• Bluetooth radio control system for controlling motion and grinding speed • Heavy-duty remote control unit allows the operator to move the machine in any direction, and maneuver with precision in tight areas • 28 in. grinding footprint is perfect for midsize commercial applications • A battery backup system built in to the machine • Motor power: 7,5 kW / 11 kW (15 hP) • Voltage: 3 x 400V / 3 x 230V • Current: 16 Amp • Frequency: 50Hz / 60Hz • Speed: 300-900/min / 500-1100/min • Grind discs: 3x9, 4 in.

• Grinding width: 28 in.

• Weight: 1,014 lbs.

• Water velvet inlet: Standard • Water tank: Optimal feature • Radio controlled: Standard, 24V • Radio frequency: 2,4 GHz (Bluetooth) • Batteries, remote control: NiHM • Battery backup for transport: standard

Bosch CSW41 Worm Drive Saw

ForConstructionPros.com/12005335

ForConstructionPros.com/12002211

The new Bosch CSW41 worm drive saw answers user demands for a lightweight saw without compromising durability and power.

• Featuring all-magnesium construction • An advanced oil lubrication system • A 15-amp motor • Operating weight of 13.2 lbs.

• Easy-to-access metal depth and bevel adjustment levers • Contrasting scale marks help ensure accuracy with each adjustment • A large bevel capacity of up to 53-degrees and a positive stop at 45-degrees • Worm drive gears feature tall, deep teeth that maximize the contact area and offer a higher load capacity than other gearing configurations • An on-board multi-function wrench makes it easy for users to change blades, brushes and oil, adjust the levers and remove the blade diamond arbor knock out • Built-in saw hook allows for convenient storage between cuts • Compatible with the WD7RIP adjustable fence and the WD7LUB worm drive saw lubricant

www.forconstructionpros.com/concrete | October/November 2014 | Concrete Contractor

CONC1014_44-50_DustSurfSaw.indd 47

47

10/15/14 10:00 AM

Sawing & Drilling Minnich Concrete Drill Wireless Remote Control Minnich offers wireless remote control technology to increase efficiency and safety for concrete dowel-pin drilling applications.

• Provides drill operator with an improved vantage point for more accurate operation and a broader viewpoint for avoiding obstacles, equipment and other workers • Allows workers to avoid harmful dust and debris • Programmed with a unique radio ID and each receiver only responds to a single corresponding radio ID, allowing several remotes to function in close proximity • Cable can be connected to the remote and drill for use in areas sensitive to signal transmission

Hilti TE 30-A36 Cordless Combihammer Drill

ForConstructionPros.com/11258752

Bobcat Wheel Saw Attachment

The TE 30A-36 cordless combihammer is designed to drill large diameter holes with the speed of a corded tool and the productivity of a cordless.

• Drilling range of 1/4- to 1-in. diameter with SDS+ (TE-C) drill bits and up to 3 1/2 in. using percussion core bits • Delivers a single impact energy of 2.7 ft-lbs and a full hammering frequency of 4,500 impacts per minute • 36-volt, 6.0-amp hour battery • The Active Torque Control system protects the operator if a bit binds while drilling and active vibration reduction improves operator comfort and productivity.

This rugged, powerful saw cuts through asphalt, concrete, frozen ground or wire mesh with more precision than air or hydraulic breakers. Powered by a high-flow Bobcat loader, it is used for road repair and for laying water, gas, electric, and fiber optic cables. The trench cleaner raises and lowers hydraulically.

• More precise cutting action than air or hydraulic hammers can provide • Easier to transport than dedicated machines ForConstructionPros.com/12002821

ForConstructionPros.com/10885359

ICS 660GC Concrete Chain Saw The 660GC was designed as an entry level saw for general construction or a light option saw for the heavy user.

• ICS Diamond Chain Technology • 64cc, 4.2-hp, two-stroke, air-cooled gas engine • 18-lb. unit • Offers up to 10-in. deep, narrow cutting and square corners in concrete, stone and masonry • Roller-bearing sprocket nose provides smoother cutting and longer guidebar life • Advanced rear-ported air intake keeps airflow slurry free • Integrated water delivery system eliminates dust and improves chain life ForConstructionPros.com/10314739

HDC100 for SDS-plus Concrete Drilling Husqvarna K 970 Power Cutter Available with 14- and 16-in. blade diameters, the K 970 power cutter is suited for heavier cutting of concrete and stone.

• 6.4-hp, 5.7-cu.-in. X-Torq engine lowers both emissions and fuel consumption • New cylinder design and carburetor increase capacity and optimize performance • The cylinder and a new muffler with integrated heat deflector ensure optimal operating temperatures and reduced sensitivity to variations in climate and fuel • A progressive water valve allows exact adjustment of the water volume, reducing water consumption and slurry ForConstructionPros.com/12000758

The Bosch HDC100 is engineered to collect dust before it enters the air through a dust cap that surrounds the tip of the bit. The metal telescoping rail retracts into the housing to accommodate the drilling application and improve jobsite durability.

• A depth adjustment allows the user to control the drilling depth up to 4-3/4 in.

• Can be used with both standard drill bits and also thin wall core bits when used with the core bit adaptor included in the kit • The dust collection housing attaches to the tool via a side handle interface • Compatible with most newer Bosch corded SDSplus hammers: 11253VSR, 11255VSR, RH228VC, RH328VC / VCQ and cordless models RHH181-01, 11536-C and 11536VSR ForConstructionPros.com/12002306

48 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_44-50_DustSurfSaw.indd 48

10/15/14 10:00 AM

WORLD’S FIRST

4-STROKE ENGINE POWER CUTTER The MAKITA TEAL COLOR is the trade dress of Makita Corporation and is protected under common law and registered with the U.S. Patent and Trademark Office. *vs Makita 2-stroke Power Cutter The MAKITA BLACK & WHITE COLOR combination is the trade dress of Makita Corporation and is protected under common law and registered with the U.S. Patent and Trademark Office. MA-4279-14

REDUCED COSTS

No 2-Stroke Oil Longer Piston & Cylinder Life

FAST STARTS*

40% Easier Pulls Pressure Compensated Carburetor up to

SUPERIOR HANDLING Less Vibration & Noise - 93.2dB(A) Retracting Aluminum Wheels

NEW 14” MM4™ 4-Stroke Power Cutter EK7651H

**Shown with optional 14” Ultra-Premium Segmented Diamond Blade T-02537

2-STROKE vs. 4-STROKE

HOW MUCH COULD YOU $AVE? Use our Fuel Savings Calculator to see how much you could save by switching to 4-Stroke. makitatools.com/MM4

CONC1014_44-50_DustSurfSaw.indd 49

MakitaToolsPage

MakitaTools

MakitaPowerTools

MakitaTools

10/15/14 10:00 AM

Sawing & Drilling Lackmond STS-6 Multi-Application Diamond Blade Lackmond Products’ newest addition to the STS family is the first true multi-application diamond blade utilizing patterned diamond technology. The third generation patterned diamond technology evenly aligns the diamonds into rows within the blade’s segment. This precise alignment ensures the maximum amount of diamonds contacting the cutting surface at any given moment. The net result is a diamond blade

with consistent segment wear rate and approximately 30 percent more footage versus comparable blades.

• Specially designed bond/matrix for effective use across multiple applications and varying aggregate hardness • Exceptional performance in softer base materials • Undercut protection segments • .400” usable diamond depth • Slanted core design for maximum cutting speed • Pre and post tensioned core to eliminate loss of tension • Available in 14” ForConstructionPros.com/12007792

MK-3000 Series of Concrete Saws

PRIME™- changing the game in concrete cutting.

Husqvarna presents PRIME™, a new product range of high frequency cutting equipment. Through the innovative utilization of high frequency current and digital processing, we bring a whole new level of efficiency and usability to the game. This increases performance, productivity, and mobility for users. To learn more, visit www.husqvarnacp.com or call your Husqvarna representative today!

Powerful. Revolutionary. Intelligent. Modular. Electric.

17400 West 119th Street • Olathe, KS 66061 • T 800-288-5040 • F 800-825-0028 • www.husqvarnacp.com Copyright © 2014 Husqvarna AB (publ.). All rights reserved. Husqvarna is a registered trademark of Husqvarna AB (publ.).

MK Diamond Products Inc. presents the MK-3000 series of concrete saws. They have been engineered to take advantage of the high horsepower V-twin air-cooled engines from Briggs and Stratton, Subaru and Kohler. They provide the cutting depth and power of traditional flat saws with all the advantages that a smaller, more maneuverable saw can provide.

• Fully self-propelled and use a manual depth feed due to their smaller size and weight • Weighs only 650 lbs.

• Equipped with an electric start • A self-contained transmission with forward travel speed of 0-220 FPM and 0-100 FPM for reverse • The Briggs and Stratton Vanguard motor is a 35 hp big block OHV 35 • The 40 hp Subaru is V-twin cylinder EH-99 • The 38 hp Kohler is a Command Pro CH980 • All engine types are offered with a 20” blade guard and 7.5” depth of cut, 26” blade guard and 10.5” depth of cut and a 30” blade size with a 12.5” depth of cut • Solid steel handlebars offer three position adjustments • A wide front wheelbase increases stability and allows ramp loading/unloading • Front and rear pivot system to allow for easy maneuvering • The blade shaft has heavy-duty bearings that allow for easy access and maintenance • The engine is mounted slightly behind the blade shaft for improved weight distribution and balance ForConstructionPros.com/12002973

50 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_44-50_DustSurfSaw.indd 50

10/15/14 10:00 AM

Repair Metzger/McGuire Rapid Refloor Pit Grout Rapid Refloor Pit Grout was developed to fill and repair concrete floor surface imperfections such as air holes, popouts, surface pitting, scratches and gouges in commercial, retail or industrial polished concrete floors.

• Can be blended with dry aggregate to produce a repair mortar for various concrete deficiencies • Available in more than 48 ColorFast Colors • Two-component, 100% solids structural polyurethane/polyurea hybrid • Rapid-setting technology • When cured, product is a rigid structural polymer with a Shore D Hardness of 70-75 and a compressive strength of 3,550 psi • Packaged in 1,500 ml (750 x 750) dual-cartridge kits ForConstructionPros.com/10853665

CTS Cement Concrete Pharmacy Rapid Set Corrosion Inhibitor

PE85 Polyurea Elastomer Joint and Crack Filler

Concrete Pharmacy Rapid Set Corrosion Inhibitor provides low chloride ion penetration, water repellence and corrosion resistance for metals embedded in a mortar or concrete, such as metal wire lath or rebar.

• Use with Rapid Set cement products and most other packaged hydraulic cements • Use in combination with all additives from the Rapid Set Concrete Pharmacy

HT-PE85 is a self-leveling, 100% solids polyurea elastomer joint and crack filler from Hi-Tech Systems.

• Two-component, 1:1 ratio • Designed for concrete with low to medium thermal cycling • Cures rapidly and consistently in applications ranging from -20° F to 130° F • Tack free in 5 to 15 minutes • Can reopen to vehicle or foot traffic in 1 hour

ForConstructionPros.com/11151525

ForConstructionPros.com/10455682

Stick with

Weld-Crete®—The pale blue bonding agent with 60 years of superior performance in the field.

Simply brush, roll or spray Weld-Crete® on to concrete or any structurally sound surface. Then come back hours, days or a week later and finish with new concrete, stucco, tile, terrazzo, other cement mixes or portland cement plaster. Plus Weld-Crete’s® low VOC content significantly reduces airborne pollutants that affect health and the environment.

800.633.6668 www.larsenproducts.com

www.forconstructionpros.com/concrete | October/November 2014 | Concrete Contractor

CONC1014_51-53_Repair.indd 51

51

10/15/14 10:01 AM

Repair The KEMROK Solution for Corrosion Resistance

Sakrete Flo-Coat Sakrete Flo-Coat is a flowable concrete resurfacing material designed to extend the life of structurally sound concrete that may have been damaged or spalled from age or weather.

• Restores the appearance of worn or discolored concrete surfaces • Simply mix, pour and spread using a squeegee • Designed for applications from 1/2-in. down to a featheredge • Polymer-modified for superior bonding strength • Use on slabs, walkways and driveways ForConstructionPros.com/10079980

ARDEX ARDIFIX Crack & Joint Repair ARDEX ARDIFIX is a two-part polyurethane repair compound for cracks, control joints, spalls and pop-outs on interior or exterior applications. It is ideally suited to seal off cracks and sawcuts prior to the installation of ARDEX MC Moisture Control Systems, underlayments and toppings.

• Ultra fast setting allowing the installation to proceed within minutes of application • 100% solids for no shrinkage and cures to a rigid hardness; no VOCs; non-flammable • Wide service temperature range of 0°F to 110°F • Extremely low viscosity allows for deep penetration • Repairs very fine cracks • Mix with sand for larger cracks or repair of spalls and pop-outs • Put into service in 10 to 15 minutes • Grind smooth in 45 minutes • Available in 22-oz. dual cartridge system

When durability and high performance is required for industrial concrete projects, KEMROK by CeraTech USA is ideal for maintenance restoration, or companies in wood/forest products, pharmaceutical, chemical, and food processing plants.

• KEMROK offers greater durability and sustainability than Portland cement concrete • KEMROK replaces epoxy coatings • Reduces material costs, plant downtime, and costly maintenance shutdowns • No special training or tools are required ForConstructionPros.com/12005149

Plaster-Weld and Weld-Crete from Larsen Plaster-Weld is a high performance bonding agent that prepares any structurally sound surface to receive one-coat finish plaster and/or two and three coat plaster work. For interior use only.

Weld-Crete, the original plaster chemical concrete bonding agent, will bond new concrete, Portland cement plaster, and cementitious mixes to structurally sound concrete floors, walls, columns, beams, steps and ramps. For exterior and interior use.

ForConstructionPros.com/12005155

Planitop 18 ES Repair Mortar Planitop 18 ES is a one-component, high-early-strength, cementitious repair mortar with a corrosion inhibitor.

• For interior/exterior horizontal concrete repairs both below- and above-grade, including bridge-deck repairs, parking-garage floor repairs and ramps • Contains silica fume to provide a dense, impermeable pore structure and a high-strength, durable repair mortar • Has the rapid-setting characteristics of Planitop 18 but with an extended set and working time ForConstructionPros.com/10909464

ForConstructionPros.com/11189186

Delpatch Elastomeric Concrete Ideal for airport runways and highways, Delpatch Elastomeric Concrete is a twopart polyurethane patching material mixed with proprietary aggregates.

• Memory allows it to return to its near original state after deflection • High load bearing capacity • Impact resistant even under heavy impact or bitterly cold conditions • Chemical resistant ForConstructionPros.com/11175654

52 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_51-53_Repair.indd 52

10/15/14 10:01 AM

ANY MIX. ANY TIME. ANYWHERE. No matter what the project, QUIKRETE® gets you the commercial-grade products you need, whenever and wherever you need them. And with over 135 manufacturing plants, we can speed hundreds of high-performance products right to your jobsite.

To place your order today, call 1-800-282-5828.

Snap this tag to view our products’ technical data.

Or visit QUIKRETE.com/TechData

CONC1014_51-53_Repair.indd 53

10/15/14 10:01 AM

Testing, Technology & Software Wagner Meters Introduces Moisture Test Kit The WFP400 – Professional Flooring Installer Package from Wagner Meters’ Flooring Division provides everything you need accurate moisture testing on concrete or wood floors. The WFP400 – Professional Flooring Installer Package will include: • MMC220: Non-damaging moisture meter The Rapid RH Starter Kit includes: • The Rapid RH Easy Reader/5-pack Smart Sensor combo • Vacuum attachment • Wire brush • Drill bit • Insertion tool • Rapid RH Datamaster with Bluetooth reader • Infrared (IR) thermometer • TH 200 thermo-hygrometer • A convenient foam-lined carry case

Project Plan Room from Dexter + Chaney for

Dexter + Chaney has unveiled its new mobile app, Project Plan Room. The app provides a vehicle to distribute construction documents, communicate critical data and relay vital project information in real time to employees’ and subcontractors’ mobile devices on the jobsite.

• Remotely access the latest versions of plans, specifications, drawings and other documents • Project Plan synchronizes with Spectrum’s Plan Room application • The app works online or offline, with no dependency on an Internet connection in order to operate or view documents • Project Plan was developed for Android, Apple, and Windows Surface tablets ForConstructionPros.com/12001093

ForConstructionPros.com/11315745

Knowledge Is Your Competitive Edge Keep your competitive edge with print and digital learning materials from ATP. We publish a broad range of products that build confidence by focusing on the skills and applications necessary to succeed on the job site and in the classroom.

ATP learning materials feature: • Effective Instructional Layout • Field-Related Applications • E-Textbook Options • Digital Learning Tools Scan here to visit our web site for more product information.

@ATP_Connect Your Partner in Learning

800.323.3471•www.atplearning.com

Tekla Structures 20 Tekla Structures 20 expands the capacity of constructible Tekla models to handle the large amounts of information needed to accurately reflect the detail contained in complex build structures.

• Organizer delivers more efficient model information management and increased automation • Task Manager offers a systematic way to plan detailing, fabrication and erection on site • Clash Check Manager allows communicating, assigning, coordinating and avoiding structural conflicts before they appear on site • Improves project team communication, collaboration and workflow efficiency ForConstructionPros.com/11332713

FLIR TG165 Imaging IR Thermometer The FLIR TG165 Imaging IR Thermometer lets contractors see heat patterns, reliably measure temperatures with the onboard spot meter, and store images and data. Ready to use right out of the box.

• Easily find hot and cold spots that are invisible to the naked eye • FLIR’s wafer-formed Lepton thermal sensor takes you beyond the limitations of single spot IR thermometers to help see the heat and know right where to measure it ForConstructionPros.com/12004363

54 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_54-55_Test.indd 54

10/15/14 10:02 AM

HydraMaster Introduces CleanMaster Solutions App for Cleaners and Restorers Track Time and Get Paid With Tiempo Tiempo is a free time-tracking app for iOS, Android and the web for companies to track hours and get paid faster. Employees log hours and send it to their manager for approval. Once approved, hours can be automatically invoiced and paid almost instantaneously.

• Tiempo is ideal for service-based small businesses, but can be used by individuals as well.

• Customers can pay right from their mobile device • Integrates with QuickBooks Online • If you don’t invoice or integrate, Tiempo is free to use for your entire company

HydraMaster announces the availability of a new FREE Smartphone/ Tablet app for CleanMaster Solutions.

• Available in all three commonly used platforms: Windows Phone, Google Play and Apple Store, where it can be found under the name CleanMaster Solutions.

• A variety of cleaning procedures included • Links to MSDS for all of the solutions are easily found ForConstructionPros.com/12003221

StreetSmart Mobile App Xora, a ClickSoftware Company presents StreetSmart, a configurable cloud-based application that helps mobile businesses and their field employees work faster and smarter.

• Integrate directly with back-office systems and other applications to automate business processes • Eliminate manual paperwork • More than 15,000 organizations rely on Xora every day to save money and grow their businesses ForConstructionPros.com/12001553

ForConstructionPros.com/11598796

www.forconstructionpros.com/concrete | October/November 2014 | Concrete Contractor

CONC1014_54-55_Test.indd 55

55

10/15/14 10:02 AM

Tier 4 Equipment

What You Need to Know About

TIER 4 EQUIPMENT

The transition to Tier 4 engine technology will continue through January 2015. Understanding the implications of this transition and what to expect as new machines enter the market will help you determine what machine will best fit your needs.

By Larry Stewart and Curt Bennink

T

ier 4 is the government mandated reduction in harmful exhaust gases for diesel powered equipment.

Tier 4 is currently the law of the land. It is no longer avoidable if you want to purchase new equipment. But there are many unanswered questions that make the decision to purchase more difficult than in the past. In order to understand the implication of Tier 4 regulations, it’s helpful to understand how diesel emissions regulations began.

The U.S. Environmental Protection Agency is a product of the Clean Air Act, which requires the agency to monitor air quality and eliminate threats to human health.

Two major components of diesel exhaust lead to the EPA’s regulating diesel emissions. Oxides of nitrogen (NOx) combine with ground-level ozone and other pollutants to form smog, and particulate matter (PM), or soot, has been found to be a serious lung irritant and potential carcinogen.

EPA chose to regulate diesel engine emissions at manufacturing, requiring new engines be certified to restricted levels of NOx and PM. However, when the regulations were being crafted, there wasn’t a clear technology path to achieve the final target level of emissions. So the regulation phased in gradually decreasing allowable levels of NOx

and PM called “Tiers” starting in 1996 and completing in 2015.

Considering the broad range of diesel engine sizes and acceptable price increases for a given size engine, the Tiers were prescribed for specific horsepower ranges to spread out the development workload, mange the cost for regulated manufacturers and to make an economic case for each set of engines. The result is a matrix of dates, horsepower ranges, and emissions levels spreading back to 1996.

equipment with the latest certified engine usually carries the highest immediate capital expenditure, this

The implications of Tier 4

Certain factors will drive demand for Tier 4 equipment, such as bid specifications and permits requiring diesel emissions reductions.

Tier 4 equipment may be required or give you an advantage when bidding government jobs or work located in EPA-designated nonattainment zones (most major urban areas). A non-attainment zone is a specific region that is out of compliance with the Clean Air Act through the proliferation of one or more defined pollutants.

Although purchasing new

Tier 4 engines such as the one pictured above from Perkins Engine often includes after treatment devices such as diesel oxidation catalysts (DOC) and diesel particulate filter (DPF) Photo Credit: Perkins Engine

56 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_56-57_Tier4.indd 56

10/15/14 10:03 AM

option ensures the equipment is compliant with the latest emissions standards, and is sometimes the best long-term financial decision for the equipment owner.

But questions do remain about performance, reliability, operating costs, maintenance and residual values. The answers to many of these questions may remain in flux until a core number of machines enter the market.

Understand your options

There are no universal solutions for Tier 4. The technologies used will depend on the size of the diesel engine and the technology approach of the particular manufacturer. For Tier 4 Final, you will really need to study available diesel engine technologies to determine which best fits your application. No single technology enables an engine to meet the stringent emissions

standards. Rather, it is a complex combination of proven strategies such as in-cylinder combustion optimization, turbo-charging strategies, exhaust gas recirculation (EGR) and high-pressure fuel injection with multiple events per cycle.

Advanced technologies aren’t always needed for smaller engines that must conform to slightly less stringent standards. In the lower horsepower range, the solutions are, for the most part, less complicated.

You can expect price increases anywhere from 8 percent to 20 percent depending on the type of equipment. This cost increase will be partially offset by fuel economy improvements up to 5 percent.

Equipment will continue the technology transition through January 2015. Keep in mind that Tier 4 Final implementation dates are staggered.

• For engines from 175 to less than 750 hp, the Tier 4 Final regulations took effect on January 1, 2014.

• For engines from 49 to less than 75 hp, it took effect on January 1, 2013.

• For engines from 75 to less than 175 hp, Tier 4 Final is required

by January 1, 2015.

Larry Stewart is the editor of ForConstructionPros.com.

Curt Bennink is senior field editor of Equipment Today magazine.

Connect with ForConstructionPros.com Facebook: www.facebook.com/ ForConstructionPros YouTube: www.youtube.com/ ForConstructionPros Twitter: www.twitter.com/4ConstructnPros

IT’S TIME TO SETTLE THIS OUTSIDE. In unforgiving conditions, it’s good to have a hardworking vehicle on your side. Available in gas, electric and diesel options, the Cushman® commercial line is built to deliver the payload and traction your workers need. Choose from seven versatile models and outpower whatever the jobsite throws your way. To learn more, or find a dealer, visit Cushman.com.

HAULER™

HAULER™ PRO

HAULER X ™

1600XD™

1600XD4

SHUTTLE ™

HAULSTER®

© 2014 Textron Inc. All rights reserved.

www.forconstructionpros.com/concrete | October/November 2014 | Concrete Contractor

CONC1014_56-57_Tier4.indd 57

57

10/15/14 10:03 AM

Work Site Products & Equipment Keson G3X100 Chalk Box The Giant Chalk Box by Keson includes a chalk catcher with spring cleaner to minimize chalk spray and reduce waste.

•

•

•

• •

High speed 3-to-1 rewind Holds 100 ft. of 1/8-in. polyester string Elliptical spool helps coat the string better Nylon-molded gear lock keeps line taut Ergonomic design for less wrist strain

ForConstructionPros.com/10079177

Skudo Surface Protection System This two-layer surface protection system provides durable surface protection while creating a safe working surface that is slip-resistant, seamless and stays in place.

• Can be applied to concrete, most flooring substrates and vertical surfaces such as cabinetry • Heavy, Medium and Light Traffic grades available, offering varying protection levels • Two-layer application method involves: 1) rolling or spraying on Base Coat, and 2) unrolling and pressing the Skudo Mat • When the job is finished, users simply peel up ForConstructionPros.com/10615784

BOMAG BPR35/60 Series Plates Three compact-size reversible plate compactors offer fully enclosed hoods, faster working speeds and greater compaction forces for granular and mixed soils.

• BPR35/60 features a 4.8-hp Honda gas engine • BPR35/60D and BPR35/60D/E both feature a 4.2-hp Hatz diesel engine • Vibratory exciter design increases working speed 23% over previous models • 13% increase in centrifugal force over previous models • 7,868 lbs. centrifugal force at 4,800 vpm • Heavy-duty, wear-resistant base plates with reinforced edges and working width of 23.6 in.

ForConstructionPros.com/10090873

CONC1014_58-64_WorkSite.indd 58

10/15/14 1:13 PM

Collomix Xo Hand-held Mixers line The Xo line of handheld concrete mixers offers an ergonomic design that allows users to stand upright when mixing concrete, mortar, plaster and grout.

• Xo 1 HF is a 1.4 hp model with a 10-gal. mixing capacity • Xo4 HF is a 1.7 hp model with a 17-gal. mixing capacity • Xo6 HF is a 2.1 hp model with a 24-gal. mixing capacity • Xo Duo model has counterrotating stirrers and can mix 24 gal.

• Newly developed motors and gearboxes are specially aimed to handle the concrete jobsite • Choose from a variety of mixing paddles • Hexafix system allows users to change mixer paddle tool-free ForConstructionPros.com/10840686

Xylem Flygt BIBO Submersible Dewatering Pump

Wirtgen SP 80i Series Slipform Concrete Pavers

Xylem’s Flygt BIBO submersible dewatering pumps are designed for the toughest dewatering environments. The pumps feature the DuraSpin hydraulic system for wear resistance.

• Plug-in seal • Single impeller-adjustment screw • Four models available: 2830, 2840, 2860 and 2870 • Handle flows up to 1,600 gpm; heads up to 300 ft.; solids up to 12 mm in diameter • Available with power ranges from 5.9 to 27 hp

The full-lane-width SP 80i has a modular design that permits different configurations.

• Can be set up as an offset SP 81i for very large sections, or as an inset paver with two tracks (SP 82i) or four tracks (SP 84i) • Fully modular inset mold system permits paving of concrete slabs with central crown from 12 to 26 ft. wide • Options include dowel-and-tie bar inserters, finishing beam and super smoother • Stringline or stringless control

ForConstructionPros.com/10920334

ForConstructionPros.com/10873763

ONE VS MANY

COMPACT TRACK LOADERS FACE OFF SEE WHO WINS GOING HEAD-TO- HEAD. Before you buy your next loader, watch compact track loaders perform in head-to-head competitions, or take a side-by-side look at the performance, serviceability and durability features that impact your potential profit. Not only do the videos show you which loader performs best for your rental customers, they explain the small details that increase customer utilization and reduce your downtime. Watch all the videos at BobcatAdvantage.com/CTLFaceOff1 or scan the code and find out who comes out on top.

BobcatAdvantage.com/CTLFaceOff1 1.877.745.7813 Bobcat® and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various other countries. ©2014 Bobcat Company. All Rights Reserved. | 1139CC-2

CONC1014_58-64_WorkSite.indd 59

10/15/14 1:13 PM

Work Site Products & Equipment

Bloom LS80K Lift-Safe Planetary Winch The LS80K Lift-Safe planetary winch features a Duet-Safe double-action braking system that combines a hydraulic brake with a braking valve.

• Automatically hold loads when hydraulic pressure is released and controls speeds during lowering operations • 65,000-lb. lifting capacity • Modular, customizable design • All-steel construction of the gear support, end housing and winch drum • 5 1/8-in.-diameter heat-treated alloy steel drum shaft ForConstructionPros.com/10742925

Arrow Master P-Series Plate Compacter Arrow-Master Incorporated offers a line of vibratory plate compactors designed for performance, handling and maneuverability.

The vibration system incorporates a full-width weight shaft and heavy-duty tapered roller bearings directly into the base.

• Reversible guide handle and double-formed leading edge for improved climbing • Protective roll bar gives greater engine and component protection with a balanced attachment point at the center for lifting • Travel rates up to 135 feet per min. and centrifugal forces ranging from 2,500 - 5,300 lbs. (specs vary with model) • The P2000 and the P5000 are available with Honda, Briggs, Robin, or Kohler engines • Excellent Maneuverability • P2000 ompacts Both Asphalt and Granular Soils • P5000 Is Ideal for Effective Sub-grade Compaction ForConstructionPros.com/12001097

Caterpillar D Series Compact and Multi Terrain Loaders The D Series includes five compact track loaders (CTLs) and five multi terrain loaders (MTLs) ranging in rated operating capacity (50% of tipping load) from 2,800 to 4,650 lbs.

• The mid-size frame 257D MTL and 259D CTL and larger frame 277D and 287D MTLs and 279D and 289D CTLs feature the 74-hp Cat C3.3B electronically controlled, 3.3-liter, Tier 4 Final engine that provides 8% more torque and 6% improved fuel economy • The 297D, 299D, 297D XHP and 299D XHP CTL feature the C3.8 electronically controlled, 3.8liter, Tier 4 Interim engine. It produces 98 gross hp for the 299D and 297D and 110 net hp for the 299D XHP and 297D XHP • Other features include a torsion-axle suspension • “Cab-One” operator station • Intelligent Leveling System (ILEV).

ForConstructionPros.com/11187738

Wacker Neuson Skid Steers and Compact Track Loaders Two skid-steer and two compact track loader models are powered by a 74-hp Perkins Tier 4 Final diesel engine with maintenance-free exhaust aftertreatment.

• SW 24 radial-lift skid steer offers a 2,350-lb. rated operating capacity and 125-in. lift height, while the SW 28 vertical-lift model has a 2,800-lb. rated operating capacity and 135-in. lift height • Standard two-speed transmission • Available in H-Pattern and ISO joystick pilot controls • Hydraulically driven fan operates only as needed

Skudo Tack-Mat Skudo’s Tack-Mat offers non-slip, durable surface protection against foot traffic, debris, UV and machinery while still being gentle enough to apply to sensitive substrates including fresh concrete.

• Usable in below freezing and hot temperatures • One-step peel and stick application process • Stain-proof against common construction site spills and stains including chemicals and solvents • Available in Light Traffic (LT) and Heavy Traffic (HT) • Sold in 560-sq.-ft. rolls, 40” wide by 165’ long ForConstructionPros.com/11298626

Multiquip LT6K Light Tower The LT6K is a compact, mobile light tower powered by a 12 hp. Tier 4 Final Kohler diesel engine. The trim design enables 12 units to be loaded onto a standard 48 ft. trailer. The fuel efficient engine and 31 gal. fuel tank combine to provide up to 66 hours run time. All major components are protected by steel housing. Other features include: • A steel tub to prevent engine fluids from contaminating the environment • Four 1,000-Watt metal halide lamps which can be positioned to illuminate construction sites, industrial areas or special events.

• A heavy-duty telescoping mast extends to a height of 30-ft. and the unit has a wind stability rating of 65 MPH. ForConstructionPros. com/11321928

ForConstructionPros.com/11330452

60 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_58-64_WorkSite.indd 60

10/15/14 1:14 PM

Access Construction Miniconveyor

•

That‘s the Power Mixer!

The Miniconveyor is a portable conveyor system manufactured by Access Construction Equipment.

• Each 10-ft. section weighs only 170 lbs.

• Turns corners, handles inclines or declines and gets into tight spaces • Suited for use in excavation, mining, disaster restoration, landscaping and pool installations Provide a unique solution to address your materials-handling needs

ForConstructionPros.com/11383996

Cushman 1600XD4 4x4 Utility Vehicle

TRAKMAT Ground Protection Mats

The 1600XD4 4X4 utility vehicle comes standard with two rows of bench seating, enabling it to seat four crew members comfortably.

• 1,325-lb. payload capacity and tow capacity up to 1,300 lbs.

• 14.2-cu.-ft. steel cargo bed can hold a maximum of 660 lbs.

• 22-hp, 1,007cc three-cylinder OHV diesel engine • Automatic, continuously variable transmission (CVT) with low- and high-gear ratios • User-selectable four-wheel-drive capability and locking rear differential • Four-wheel independent suspension

TRAKMAT ground protection mats are designed for professionals to get vehicles in and out a jobsite without damaging the property.

• Strong ½-in. thick poly material that will bend not break • Superior traction surface • Hand cutouts for easy lifting • Chemical and oil resistant • Available in Cool Green or Utility Black • Available in various sizes and a smooth on one side mat, to meet your vehicle/equipment needs • Recommend to use with a concrete buggy

ForConstructionPros.com/11430388

Gehl Mid-frame R Series kid Loaders Gehl’s mid-frame R Series radial-lift skid loaders include the R150, R135 (which replaces the 4240E) and R165 (which replaces the 4640E Power2) which feature a new operator station with integrated digital display, new load arm design with increased visibility and Yanmar Tier 4 engines.

• Engines incorporate diesel particulat filter (DPF) technology • Standard proportional auziliary hydraulics • Front-lifting restraint bar and armrests with multiple adjustments • Mechanical or air-ride suspension seat options • Three control options: T-bar, hand/foot and joystick (R165 only) • Cabforward design and lowered rear towers for visibility to the bucket edge and rear of machine • Optional pressurized cab enclosure • Level II FOPS structure • Manual Quick-a-Tach or hydraluic Power-a-Tach

ForConstructionPros.com/12001498

• • •

• • • •

attachment systems HydraGlide ride control Hydraloc safety system Rated operating capacities range from 1,500 to 1,800 lbs.

Lift heights up to 119 in. (on R150 and R165) Max torque ratings from 107.8 to 178 ft.-lbs.

Flow rates from 17 to 18.9 gpm Gross power: 46.3 hp (R135, R150); 69.9 hp (R165)

www.forconstructionpros.com/concrete | October/November 2014 | Concrete Contractor

CONC1014_58-64_WorkSite.indd 61

Works the material, not your body!

Powerful, long-lasting motor with counter-rotating blades for fast and perfect mixtures.

Optimized ergonomics.

ForConstructionPros.com/12002576

www.collomix.us 61

10/15/14 1:14 PM

Work Site Products & Equipment

Wagman Pro Pump Express Kits

Wacker Neuson Gas-powered Rammers The BS 50-4As and BS 60-4As vibratory rammers are equipped with a 3.2-hp Honda GX 100 fourcycle engine with low oil shutoff technology.

• Purge bulb that evacuates air from the fuel line for easy starts • Compensated carburetor maintains optimum air-fuel ratio • Four-stage air filtration system offers 20% more capacity than the previous design • Feature long shoe stroke and more blows per minute • Premix two-cycle and diesel models also available

Curb Fox 2000 Slipforms Curb According to the company, Curb Fox Equipment, LLC, offers the least expensive automatic slipform paver on the market — the CF2000.

The CF2000 provides: • Versatility: Maximum paving height up to 18” (46 cm) and curb and gutter up to 24” (60 cm) wide. Operates manually on pavement or automatically on sub grade.

• Simplicity: Crews spend less time learning operation, and more time slipforming • Speed: Paves small curbs up to 35 fpm (11 mpm) and curb and gutter at 5-10 fpm (1.5-3 mpm) ForConstructionPros.com/12002948

ForConstructionPros.com/12002436

The Wagman Pro Pump Express Kits are available in 120V AC and 12V DC kits. The kits are designed to spray: curing compounds (including high solids and waxes); concrete sealers; form oils; release agents; stains; deck sealers; cleaners; bleach solutions; fertilizers; pesticides; and herbicides.

For spraying acids, replace brass control gun, wands and tips with plastic versions. Kits includes: • 12V DC or 120V AC power unit in a steel enclosure • 25 ft. chemical resistant application hose • 3 ft. 10 in. suction hose with brass nozzle and screen • 2 brass wand extensions (18 in. straight and 18 in. curved) • 1 brass control gun with brass barb end • 2 brass fan tips (1.0 gpm and 0.5 gpm) • Portable & compact with BIG spraying power to replace gasoline engine type • Fits on almost any container • Easily mounts anywhere with corner mount holes ForConstructionPros.com/12001106

Specialty Winches and Capstans for the Concrete Industry

Cut Curbing Costs!!!

WINCH

Designed for Outstanding Performance and Safety BLOOM Mfg. Inc. www.bloommfg.com

Independence, Iowa 50644 FAX 319-827-1140 PHONE 319-827-1139 800-394-1139

“Custom Engineered Solutions Since 1910” 62 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_58-64_WorkSite.indd 62

10/15/14 1:14 PM

16,000 lb. Capacity Lo Riser Inclining Platform Trailer Advance Metalworking’s 16,000-pound capacity Lo Riser inclining platform trailer hydraulically lowers the platform to ground height with the flip of a switch providing easy, drive-on access.

• A 19,725 lb. GVWR • Four-to-one payload-to-trailer weight ratio ForConstructionPros.com/12006445

Handheld Mixer for GFRC Mixes

Ameri-Block, Ameri-Block Plus from North American Specialty Products

Glass fiber reinforced concrete (GFRC) is very sensitive to the mix consistency - viscosity, flowability, workability. GFRC mixes must be high shear mixed, and the Collomix Xo6 mixer is the ideal tool for the job.

• Lightweight • Inexpensive • Easy to operate • Powerful • Versatile - can mix GFRC, aggregatebased fluid mixes and stiff all-sand mixes

North American Specialty Products LLC, a provider of foundation building products introduces two dampproofing and drainage solutions. Two new dimpledmembrane products, damp-proofing membrane Ameri-Block and drainage membrane Ameri-Block Plus is now available.

• Ameri-Block is a dimpled, 100-percent-recycled, high-density-polyethylene (HDPE) membrane for exterior foundation damp proofing • Dimpled construction separates water from the foundation wall and bridges foundation cracks, preventing moisture from entering the basement • Ameri-Block Plus acts as a drainage layer for waterproofing applications • Installed with the dimples facing away from the concrete wall, its dimpled construction channels water to the foundation drainage system while its geotextile fabric blocks soil to maintain a high flow rate

ForConstructionPros.com/12005202

ForConstructionPros.com/12005979

FASTER TO THE FINISH Compaction equipment with the speed and centrifugal force to get to the right density – and the next project – more quickly.

Call today. Get more done tomorrow.

800-732-6762 | www.atlascopco.us

www.forconstructionpros.com/concrete | October/November 2014 | Concrete Contractor

CONC1014_58-64_WorkSite.indd 63

63

10/15/14 1:14 PM

Work Site Products & Equipment Martin Railcar Opener Martin Railcar Opener is an adjustable air-powered opener that maneuvers easily on three wheels to release the most stubborn hopper car gates, reducing safety risks for personnel and improving unloading efficiency.

Martin Railcar Opener uses compressed air to provide powerful force to open gates without backbreaking labor or gate damage.

• Powers open the most stubborn hopper car gate with 2,700 ft-lb (3661 N-m) of torque at 90 psi (6.2 bar) • Three pivoting wheels allow unit to maintain contact with traveling capstan of rack and pinion gate opener on hopper cars • Smooth, non-impacting force opens gates without costly damage or loud noise (83 dBa at operator position) • Operates from 90-120 psi (6.2 to 8.2 bar), air supply at 20 cfm (566 L/min) • Capstan height is adjustable to fit various car gates and compensate for variations in unloading platforms

Dam-It Dams Cofferdams Dam-It Dams has successfully completed projects for The U.S. Army Corps of Engineers, Department of Transportation, U.S. Coast Guard, and Department of Natural Resources along with multiple Pipeline Contractors and Leading Engineering firms throughout the Public and Private Sectors around the world.

• Solve complex dewatering, diversion and containment problems • Dam-It Dams Cofferdams save time • They are 60 to 70% more cost effective than steel seawall or traditional earthen fill dams • Environmentally friendly and reusable ForConstructionPros.com/12002287

FCC Cold Planer FFC cold planers by Paladin Construction Group attach to skid-steer loaders to mill down frost heaves, concrete joints and full-depth utility cuts.

• “V” shaped pic pattern with four teeth mounted on both outside drum edges to accommodate the highest wear areas • Standard-flow models offer 12- and 16-in. cutting widths and operate with 13- to 16-gpm hydraulic flows • High-flow models offer 16- to 36-in. cutting widths and operate with 24- to 45-gpm flows • 24-in. left or right side shift allows cutting next to curbs and other obstacles ForConstructionPros.com/10089773

ForConstructionPros.com/12005292

Chicago Pneumatic T4F 185 CFM Compressor Chicago Pneumatic Construction Equipment has released the CPS 185 KD T4F portable diesel compressor to the North American marketplace.

The flexible and reliable 185 CFM compressor can be utilized for a wide range of general construction applications and is now available from authorized Chicago Pneumatic equipment dealers across the country.

• Equipped with a water-cooled, 49 hp, 4-cylinder T4F Kubota engine • Operating weight of 2,400 lbs, and measures 131” long, 60” wide, and 55.25” tall • The compressor offers a maximum unloading pressure of 125 psi • A 20-gallon fuel tank • Quiet operation at a 76 dBA sound level ForConstructionPros. com/12007869

WEDA Small Dewatering Pumps Atlas Copco’s small range of WEDA dewatering pumps include the WEDA04 and WEDA08 for drainage pumping, the WEDA08S for sludge pumping and the WEDA04B for low suction pumping.

• Smooth and threaded discharge • Thermo protection keeps pumps running under a variety of conditions • Pump stops automatically due to overheating or overload/over-current; restarts automatically after cooling down • All models feature dry running capability • WEDA04 & WEDA08: 750-watt electric motors; polyurethane semi-vortex impeller reduces clogging; built-in motor prtoection; high torque capacitor; three-terminal automatic cutoff prevents motor overload and dry buring.

• WEDA04B: 400-watt electric motor; pump down to 1 mm of water; rubber-coated bottom plate protects against scratches or damage • WEDA08S: designed for difficult sand and mud applications; 750-watt electric motor; vortex cast-iron impeller; particles and debris up to 25 mm can go through pump housing; three-bolt disassembling design ForConstructionPros.com/11291382

Bobcat M-Series excavators advance to Tier 4 Bobcat Company has released four new Tier 4 excavators — the E42, E45, E50 and E55 — which include a non-DPF (diesel particulate filter) engine solution.

• The machines feature a new forward-mount instrumentation system • Tier 4 emissions compliance can be achieved without using a DPF. • Three of the Tier 4 excavators — the E42, E45 and E55 — offer a clamp-ready extendable-arm configuration that provides additional length when fully extended, giving operators ultimate reach without having to upsize the machine.

• A total of 13 Bobcat attachments that can help these four versatile machines do more than dig.

They include augers, breakers, plate compactors, grading buckets, trenchers and rippers to name a few.

ForConstructionPros.com/11302637

64 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_58-64_WorkSite.indd 64

10/15/14 1:14 PM

Power Tools, Hand Tools, Lasers & Levels Trimble Spectra Precision LL300N Laser Level

Bosch Advances SDS-max Lineup

The Spectra Precision LL300N Laser Level is a fully automatic, self-leveling laser level designed to handle a wide range of general construction, concrete and site preparation applications including general elevation control, leveling forms and footers, concrete pours, excavations and basic slopes.

• Can withstand drops up to 3 ft. onto concrete and tripod tip-overs up to 5 ft.

• One-button operation for basic leveling • Glass lighthouse • Metal sunshade • Optional RC601 Remote Control for additional performance features such as single-axis slope mode and manual slope matching capabilities

Bosch introduces the new DH712VC Demolition Hammer and 1-3/4-inch RH745 Rotary Hammer.

• The DH712VC delivers 9.6 ft. lbs. of impact energy (EPTA) at a low weight of only 18.3 lbs.

• The RH745 delivers 7.6 ft. lbs. of impact energy (EPTA) improving jobsite efficiency • The DH712VC demolition hammer also comes equipped with vibration control • The vario-lock function allows the chisel to be rotated to 12 positions to when hammer is used in chiseling mode • The DH712VC demolition hammer also features a unique trigger design with an auto lock-on switch

ForConstructionPros.com/12001857

Makita HR4013C with enhanced AVT Makita’s new 1-9/16” AVT Rotary Hammer has 45% less vibration and 20% more impact energy than the previous model. The new HR4013C is engineered with enhanced Anti-Vibration Technology (AVT), a synchronized threecomponent system for significantly less vibration.

• 11 AMP motor delivers 11.4 Joules (8.4 ft. lbs.) of impact energy • Lock-on or trigger-activated in the “chipping only” mode, with a push button start/stop control • 1,450 – 2,900 BPM

ForConstructionPros.com/12002292

ForConstructionPros.com/11364484

50th Anniversary Edition Hand Trowel Wagman Metal Products Inc. launches the 50th anniversary edition hand trowel.

• High strength polished aluminum alloy shanks riveted to trowel steel • Wood grips have a fine furniture finish • Rubber grips are made from a comfortable durable urethane

M A K E

YO U R

M A R K

For over 45 years, our family-owned company has served distributors and builders.

M A K E

YO U R

M A R K

M A K E

YO U R

M A R K

Thank you for allowing us to help you

M A K E Y O U R M A R K®

ForConstructionPros.com/12006425

DEWALT 1-1/8” SDS Combination Hammer The DEWALT 1-1/8” SDS Combination Hammer(D25416K) features the E-Clutch Anti-Rotational Technology providing the next level of control for users during bind up situations.

The SHOCKS – Active Vibration Control reduces vibration and fatique felt by the user.

• 3-mode selector allows for easy switching between hammerdrilling, rotary only, and chipping only • 9.0 amp motor • 4.2 joules impact energy delivers power for fast drilling and chipping • Forward/Reverse switch allows user to back out the bit in a bind up situation

keson.com

800-345-3766

ForConstructionPros.com/12004130 www.forconstructionpros.com/concrete | October/November 2014 | Concrete Contractor

CONC1014_65_PowerTools.indd 65

65

10/15/14 10:05 AM

Advertiser’s Index ADVERTISERS’ INDEX................................. PAGE American Technical Publishers..................................54 Atlas Copco...................................................................... 63 BASF Construction Chemicals..................................... 7 Bloom Manufacturing Inc........................................... 62 Bobcat...........................................................................58,59 BORIDE Engineered Abrasives..................................42 Carlisle Construction Materials.................................. 13 CDC Larue.......................................................................40 Collomix USA................................................................. 61 Curb Fox Equipment..................................................... 62 Cushman.......................................................................... 57 Dayton Superior Corp..................................................... 9 EDCO ............................................................................... 38 EzyScreed.........................................................................24 Fascut Industries............................................................. 10 GelMAXX........................................................................ 38 Gensco Equipment Co.................................................. 12 GMC.................................................................................... 2 H&C Concrete Coatings.........................................29, 36 Headwater Resources..................................................... 16 Holcim Inc....................................................................... 17 Husqvarna Construction Products............................50 Jon Don............................................................................. 37 Keson Industries, Inc..................................................... 65 Kut-Rite Manufacturing...............................................43 Landre Corp.................................................................... 22 Larsen Products Corp.................................................... 51 Ligchine International LLC.......................................... 23 Line Dragon, LLC........................................................... 18 Makita USA Inc..............................................................49 MBW Inc..........................................................................24 McKinnon.................................................................. 34-35 Multiquip Inc.................................................................. 39 Oztec Industries Inc....................................................... 19 PrimeSource Building Products, Inc......................... 11 Putzmeister America..................................................... 21 The Quikrete Companies............................................. 53 Schwing America Inc....................................................20 Simpson Strong-Tie Co., Inc...................................14-15 Spin Screed....................................................................... 25 The Stamp Store.............................................................. 32 Super-Krete Intl. Inc...................................................... 31 Superabrasive Inc............................................................ 41 TEKLA Inc....................................................................... 55 Trinic.................................................................................30 Wacker Neuson Corporation........................................ 5 Wagman Metal Products Inc.......................................42 Waste Management Inc................................................68 World of Concrete.......................................................... 67

Statement of Ownership, Management, and Circulation

(Requester Publications Only)

1. Publication Title

2. Publication Number

3. Filing Date

4. Issue Frequency

5. Number of Issues Published Annually

6. Annual Subscription Price

Concrete Contractor

Jan, Feb/Mar, Apr/May, Jun/Jul, Aug/Sep, Oct/Nov, Dec

021-799 7

7. Complete Mailing Address of Known Office of Publication (Street, City, County, State, and Zip+4)

AC Business Media, Inc 1233 Janesville Ave PO Box 803 Fort Atkinson, WI 53538-0803

September 12, 2014 Free to Qualified Subscribers

Contact Person

Wendy Chady

Telephone

(920) 563-6388

8. Complete Mailing Address of Headquarters or General Business Office of Publisher

AC Business Media, Inc., 1233 Janesville Ave, PO Box 803, Fort Atkinson, WI 53538-0803

9. Full Names and Complete Mailing Addresses of Publisher, Editor, and Managing Editor Publisher (Name and Complete Mailing Address)

Nancy Terrill, Publisher 1233 Janesville Avenue, PO Box 803 Fort Atkinson, WI 53538-0803

Editor (Name and Complete Mailing Address)

Ryan Olson, Editor 1233 Janesville Avenue, PO Box 803 Fort Atkinson, WI 53538-0803

Managing Editor (Name and Complete Mailing Address)

10. Owner (Do not leave blank. If the publication is owned by a corporation, give the name and address of the corporation immediately followed by the names and addresses of all stockholders owning or holding 1 percent or more of the total amount of stock . If not owned by a corporation, give the names and addresses of the individual owners. If owned by a partnership or other unincorporated firm, give its name and address as well as those of each individual owner. If the publication is published by a nonprofit organization, give its name and address.)

Full Name

Carl Wistreich, President & CEO Anil R Narang, Chairman

Complete Mailing Address

1233 Janesville Avenue, PO Box 803, Fort Atkinson WI 53538-0803 1233 Janesville Avenue, PO Box 803, Fort Atkinson WI 53538-0803

11. Known Bondholders, Mortgagees, and Other Security Holders Owning or Holding 1 Percent

or more of Total Amount of Bonds, Mortgages or Other Securities. If none, check here.  None Full Name

Complete Mailing Address

12. Tax Status (For completion by nonprofit organizations authorized to mail at nonprofit rates) . (Check One) The purpose, function, and nonprofit status of this organization and the exempt status for federal income

 Has Not Changed During Preceding 12 Months

tax purposes:

PS Form 3526-R Facsimile, July 2014

 Has Changed During Preceding 12 Months

13. Publication Title

14. Issue Date for Circulation Data Below

Concrete Contractor

Aug/Sep 2014

15. Extent and Nature of Circulation

Average No. Copies Each Issue During

Issue Published

Preceding 12 Months

Nearest to Filing Date

27962

27925

20005

17479

0

0

(3) Sales Through Dealers & Carriers, Street Vendors, Counter

3

3

(4) Requested Copies Distributed by Other Mail Classes

0

0

20008

17482

7443

9958

0

0

a. Total Number of Copies (net press run) Outside County Paid/Requested Mail Subscriptions stated on

(1) PS Form 3541. (Include direct written request from recipient, telemarketing and b. Legitimate Paid and/or Requested

Internet requests from recipient, paid subscriptions including nominal rate subscriptions, employer requests, advertiser's proof copies, and exchange copies.)

(2) In-County Paid/Requested Mail Subscriptions stated on PS

Distribution

Form 3451. (Include direct written request from recipient, telemarketing and internet

(By Mail

requests from recipient, paid subscriptions including nominal rate subscriptions,

and Outside the Mail)

employer requests, advertiser's proof copies, and exchange copies.)

Sales, and Other Paid or Requested distribution Outside USPS. Through the USPS. (e.g. first-Class Mail)

c. Total Paid and/or Requested Circulation [Sum of 15b(1), (2), (3), (4)]

(1) Outside County Nonrequested Copies stated on PS form 3541. (include sample copies, requests over 3 years old, requests induced by a premium,

d. Nonrequested

bulk sales and requests including association requests, names obtained from

Distribution

business directories, lists, and other sources)

(By Mail

No. Copies of Single

(2) In-County Nonrequested Copies stated on PS form 3541.

and Outside

(include sample copies, requests over 3 years old, requests induced by a premium,

the Mail)

bulk sales and requests including association requests, names obtained from business directories, lists, and other sources)

(3) Nonrequested Copies Distributed Through the USPS by

Other Classes of Mail.(e.g. First-Class Mail, nonrequestor copies mailed in

0

0

288

206

excess of 10% Limit mailed at Standard Mail or Package Services Rates)

(4) Nonrequested Copies Distributed Outside the Mail (include pickup stands, trade shows, showrooms, and other sources)

e. Total Nonrequested Distribution (Sum of 15d (1), (2), and (3)) f. Total Distribution (Sum of 15c and e)

7731

10164

27739

27646

g. Copies Not Distributed

223

279

h. Total (Sum of 15f and g)

27962

27925

i. Percent Paid and/or Requested Circulation

72.1%

63.2%

(15c / 15f x 100)

*if you are claiming electronic copies, go to line 16 on page 3. If you are not claiming electronic copies, skip to line 17 on page 3.

PS Form 3526 -R Facsimile, July 2014

Statement of Ownership, Management, and Circulation

(Requester Publications Only)

Average No. Copies

16. Electronic Copy Circulation

No. Copies of Single

Each Issue During

Issue Published

Preceding 12 Months

Nearest to Filing Date

a. Requested and Paid Electronic Copies

-

-

b. Total Requested and Paid Print Copies (Line 15C) + Requested/Paid Electronic Copies (Line 16a)

-

-

c. Total Copy Distribution (Line 15F) + Requested/Paid Electronic Copies (Line 16a)

-

-

d. Percent Paid and/or Requested Circulation (Both Print & Electronic Copies) (16b divided by 16c X 100) x I certify that 50% of all my distributed copies (electronic & print) are legitimate requests or paid copies 17. Publication of Statement of Ownership for a Requester Publication is required and will be printed in the October/November issue of this publication.

18. Signature and Title of Editor, Publisher, Business Manager, or Owner

Date

Carl Wistreich, President & CEO

I certify that all information furnished on this form is true and complete. I understand that anyone who furnishes false or m isleading information on this form or who omits material or information requested on the form may be subject to criminal sanctions (including fines and imprisonment) and/or civil sanctions (including civil penalties).

PS Form 3526 -R Facsimile, July 2014

66 Concrete Contractor | October/November 2014 | www.forconstructionpros.com/concrete

CONC1014_66-68_Index.indd 66

10/15/14 10:07 AM

V, U S A S, N

EG A

SV LA

• ER

NT CE

O

N

FE

BR

UA

RY

3-6

LAS , 201 • 6 5 • S E M I N A RS : F E B R U A RY 2

VE

G

C AS

ON

N VE

TI

Come to World of Concrete, roll up your sleeves and try your hand at the year’s newest products, equipment and services.

Technology, training, resources and ideas—zoom in at the industry’s only annual international event designed specifically for commercial concrete and masonry professionals.

A selected participant in the International Buyer Program

CONC1014_66-68_Index.indd 67

www.worldofconcrete.com Source Code: CONC

10/15/14 10:07 AM

M

PUT THIS IN YOUR

TOOLBOX The new WM Mobile App is the first of its kind in the industry, and gives you the same powerful scheduling and account management features you’ll find on wm.com. Now you have the flexibility to access your account and schedule roll-off pickups right from your phone.

Exclusively for Waste Management customers.

Get the new app at wm.com/GoMobile2.

MANAGE YOUR ACCOUNT PAY YOUR BILL

REQUEST ROLL-OFF PICKUP

© 2014 Waste Management Apple, the Apple logo and iPhone are trademarks of Apple Inc. App Store is a service mark of Apple Inc. Google Play is a trademark of Google, Inc.

CONC1014_66-68_Index.indd 68

10/15/14 10:07 AM