__MAIN_TEXT__

Page 1

2020

AUGUST 2020

ANNUAL SHOWCASE & BUYERS GUIDE

+

OVER 250

www.ForConstructionPros.com/Asphalt ACON0820_01_Cover_J.indd 1

PRODUCTS FOR YOUR ASPHALT BUSINESS 7/27/20 2:01 PM


WE ARE HERE FOR YOU Full service branch offices: Atlanta Charlotte Dallas Denver Des Moines Indianapolis Kansas City

Little Rock Nashville New Orleans Oklahoma City Pittsburgh Portland San Antonio St. Louis

All programs may not be available in all states.

Since 1917, BITCO has provided customized insurance programs and services to support the backbone of the American economy. We’ve been protecting contractors like yours who help maintain America’s critical infrastructure through the ups and downs of the economy for years. Looking for a partner who understands your business, values long-term relationships and provides you the peace of mind that comes with being insured by an insurance carrier that is backed by the strength and stability of a Fortune 500 company? Look no further. We are proud to be a member of the Old Republic Insurance Group, the largest business segment of Old Republic International, one of America’s 50 largest shareholder-owned insurance businesses.

Insurance contracts are underwritten and issued by one or more of the following: BITCO General Insurance Corporation and BITCO National Insurance Company (domiciled in Illinois), rated A+ (Superior) by A.M. Best, A2 Stable by Moody’s, and A+ Strong by Standard and Poor’s.

We are committed to you and are here for the long run. Visit BITCO.com to find a specialist agent near you.

1-800-475-4477

BITCO.com

ACON0820_02-07_TOC.indd 2

7/22/20 8:49 AM


GENCOR, YOUR TRUSTED CHOICE!

At Gencor, we’ve led the industry with the most fuel-efficient, environmentally clean and lowest-maintenance design available to the hot mix industry. Gencor Industries remains focused on proactively serving and satisfying its customers from all aspects. Through improved cost-effectiveness, and quality of its products and services, Gencor’s personnel are dedicated to the principle of providing the highest quality to the industry to maintain a sustainable competitive advantage for Gencor. LEADER IN PERFORMANCE AND EFFICIENCY Call 407-290-6000 or visit www.gencor.com

ACON0820_02-07_TOC.indd 3

7/20/20 1:05 PM


TABLE OF CONTENTS |

AUGUST 2020

2020 8

Editor’s Perspective: Asphalt paving and construction operations are essential to keeping our economy running. From face coverings to social distancing, workers need to protect themselves and their co-workers from the Coronavirus. Here’s how.

10 Asphalt Plant Equipment & Production Products:

Plants, baghouses, heaters, mixers, dryers, silos, crushers, conveyors, automation systems & more for the production of asphalt.

4

11 Asphalt Plants 18 Plant Components 33 Plant Technology 36 Crushers & Screening

58 Material Transfer Vehicles

60 Paving Support Equipment

62 Quality Control

Plants

40 Asphalt Pavement Construction & Jobsite Products:

Pavers, rollers, screeds, MTVs, support equipment & more products for the construction of asphalt pavements.

41 Asphalt Pavers 53 Asphalt Rollers

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_02-07_TOC.indd 4

PRODUCT SHOWCASE & BUYERS GUIDE 65 Milling Machines 68 Preservation Equipment 72 Preservation Supplies 74 Technology:

Products & tools that highlight latest trends in technology that can help improve productivity and quality for asphalt contractors.

64 Asphalt Pavement Preservation & Rehabilitation Products:

Milling machines, reclaimers, infrared equipment, crack sealing equipment & more for the preservation and surface treatment of asphalt pavements.

76 Site Prep & Earthmoving:

Motor graders, skid steers, haulers, excavators & more to assist in the development of infrastructure.

78 Trucks & Trailers:

Equipment designed to safely haul your machines and materials.

www.ForConstructionPros.com/Asphalt

7/20/20 1:05 PM


SE

ent

es

p

rs, ore

:

es

ACON0820_02-07_TOC.indd 5

7/20/20 1:05 PM


DIGITAL CONNECTION www.ForConstructionPros.com/Asphalt

How Inaction on Funding for Infrastructure Trickles Down to Impact Workers

[VIDEO] Will Infrastructure Funding Plans Pass Before FAST Act Expires?

The Brookings Institute says that 1 out of every 10 jobs in America is related to infrastructure. What happens to those workers if we don’t get the funding needed to keep projects going? We don’t want to find out. The time is now to pass an infrastructure bill. Search: 21136481

COVID-19 Causing Faster Depletion of the Highway Trust Fund Prior to the pandemic, the Congressional Budget Office projected the Highway Trust Fund would run out of money in mid-2021. Now, with Americans driving less, the Highway Trust Fund will reach insolvency far sooner than first predicted.

Democrats in the House of Representatives have introduced a $1.5 trillion infrastructure bill, and the White House has ordered the U.S. Transportation Department to devise a $1 trillion infrastructure funding bill. Search: 21137891

How Milling Contractors Can Comply with OSHA’s Silica Dust Rule In 2020, OSHA intends to target roadway construction activities, specifically milling activities, to identify and reduce worker exposure to silica dust; Here’s how to comply. Search: 21119502

Search: 21138072

WWW.FORCONSTRUCTIONPROS.COM/ASPHALT

CONTRACTOR WWW.FORCONSTRUCTIONPROS.COM/ASPHALT WWW.FORCONSTRUCTIONPROS.COM/ASPHALT

Get social with us! Share pictures of what you’re working with over 28,000 other asphalt contractors on our Facebook page: Facebook.com/ Asphalt.Contractor/

CONTRACTOR LATEST INNOVATIONS FOR ASPHALT PROFESSIONALS

LATEST INNOVATIONS INNOVATIONS FOR FOR ASPHALT ASPHALT PROFESSIONALS PROFESSIONALS LATEST

ASPHALT ASPHALT

AUGUST 2020 Vol. 34, No. 6

CONTRACTOR CONTRACTOR LATEST INNOVATIONS FOR ASPHALT PROFESSIONALS

LATEST INNOVATIONS FOR ASPHALT PROFESSIONALS LATEST INNOVATIONS FOR ASPHALT PROFESSIONALS

Published by AC Business Media.

Asphalt

Asphalt CONTRACTOR

CONTRACTOR

201 N. Main Street, Fifth Floor Fort Atkinson, WI 53538 (800) 538-5544 • www.ACBusinessMedia.com LATEST INNOVATIONS FOR ASPHALT PROFESSIONALS www.ForConstructionPros.com/Asphalt LATEST INNOVATIONS INNOVATIONS FOR FOR ASPHALT ASPHALT PROFESSIONALS PROFESSIONALS LATEST

6

Published and copyrighted 2020 by AC Business Media. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording or any information storage or retrieval system, without written permission from the publisher. Asphalt Contractor (ISSN 1055-9205, USPS 0020-688):is published ten times per year: January, February, March/April, May, June/July, August, September, October, November, December, with an additional Buyer’s Guide issue published in August by AC Business Media, 201 N. Main Street, Fifth Floor, Fort Atkinson, Wisconsin 53538. Periodicals postage paid at Fort Atkinson, Wisconsin and additional entry offices. POSTMASTER: Please send change of address to ASPHALT CONTRACTOR, PO Box 3605, Northbrook, Illinois 60065-3605. Printed in the U.S.A. SUBSCRIPTION POLICY: Individual subscriptions are available without charge only in the USA. The Publisher reserves the right to reject nonqualifying subscribers. One-year subscription to nonqualifying individuals: U.S. $45.00, Canada & Mexico $65.00, and $95.00 all other countries (payable in U.S. funds, drawn on U.S. bank). Single copies available (prepaid only) $10.00 each (U.S., Canada & Mexico), $15.00 each (International).

ASPHALT CONTRACTOR AUGUST 2020 www.ForConstructionPros.com/Asphalt

ACON0820_02-07_TOC.indd 6

7/20/20 1:05 PM


N

r ge

00

ACON0820_02-07_TOC.indd 7

7/20/20 1:05 PM


WWW.FORCONSTRUCTIONPROS.COM/ASPHALT WWW.FORCONSTRUCTIONPROS.COM/ASPHALT WWW.FORCONSTRUCTIONPROS.COM/ASPHALT

CONTRACTOR

EDITOR’S PERSPECTIVE

LATEST INNOVATIONS FOR ASPHALT PROFESSIONALS PROFESSIONALS LATEST LATEST INNOVATIONS INNOVATIONS FOR ASPHALT PROFESSIONALS

AUGUST 2020 • Vol. 34, No. 6

Jessica Lombardo, Editor

How to Overcome COVID-19 Challenges

W

1. CLEAN & SANITIZE • Crews need to clean their own equipment before shift and after each use. • Complete a jobsite audit and determine where employees are touching shared surfaces and make sure those surfaces are disinfected regularly throughout the day. • Color-code tools so people are using the same tools all day that have not been touched by another worker. • Always provide on-site hand-washing - no shared water. 2. SOCIAL DISTANCING & FACE COVERINGS • Hard physical work makes it difficult to wear a mask all day – make sure you have different mask options to best suit worker needs. • If your state does not require masks, use best practices for social distancing and make sure you trust your crew to stay apart from each other. • Make sure workers take frequent breaks to avoid heat stress related to wearing a mask. • Avoid ride-sharing to a jobsite and allow crews to drive their own vehicles if possible

8

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_08-9_Editor_J.indd 8

CONTRACTOR LATEST PROFESSIONALS LATEST INNOVATIONS FOR ASPHALTPROFESSIONALS LATEST INNOVATIONS FOR ASPHALT

jLombardo@ACBusinessMedia.com 920.542.1247

hether your crew consists of five members or five hundred, COVID-19 has impacted the way you operate. The asphalt industry has been fortunate in that the work we do is essential, so we’ve been able to keep working. The challenge has been how do we do it safely? Work zones are already challenging operating environments but construction business owners have made it a priority to keep their workers safe and do their part to stop the spread of the Coronavirus. Here are five key ways asphalt contractors can help protect their workers from becoming a victim of the pandemic:

ASPHALT

3. ADMINISTRATIVE CONTROLS • Plan jobsite work-shifting and install plexiglass barriers inside small spaces. • Explore new technology to see if there are ways to streamline processes that are normally done in-person. 4. COMMUNICATE & MAINTAIN A SAFE CULTURE • Have a safety meeting at the beginning of every shift to not only discuss the procedures of the day, but to keep COVID-19 top of mind for workers. • Do not let COVID-19 polices become a distraction from normal safety operations and keep normal hazards in mind. • Communicate regularly with the crew about current protocols surrounding COVID-19 protection requirements. 5. FIT FOR DUTY & BACK-TOWORK PROTOCOLS • Ensure employees have not been exposed to COVID-19 by asking a series of questions. Use a third party service to help. • Some companies are using temperatures scans at the beginning of the day as well to ensure workers are fit to work. • Communicate with employees on any exposure that may have occurred and develop a plan to quarantine employees on a case-by-case basis. Finally, make sure your workers avoid complacency. COVID-19 is a common enemy that we can all work hard to destroy. And while workers may not enjoy wearing gloves and masks in 100° F heat, you can’t allow your crew to become complacent in following protocol to protect themselves and others. Stay safe out there.

Published by AC Business Media

Asphalt CONTRACTOR

M

201 N. Main Street | Fort Atkinson, WI 53538 800.538-5544 • www.ACBusinessMedia.com LATEST INNOVATIONS INNOVATIONS FOR FOR ASPHALT ASPHALT PROFESSIONALS PROFESSIONALS LATEST PROFESSIONALS LATEST www.ForConstructionPros.com/Asphalt

Publication Staff Associate Publisher

Cathy Somers csomers@ACBusinessMedia.com

Editor

Jessica Lombardo jlombardo@ACBusinessMedia.com

Ad Production Manager

Cindy Rusch

Art Director

April Van Etten

Audience Development Mgr

Angela Franks

Advertising Sales (800) 538-5544 Kris Flitcroft

kflitcroft@ACBusinessMedia.com

Sean Dunphy

sdunphy@ACBusinessMedia.com

Tom Lutzke

tlutzke@ACBusinessMedia.com

Eric Servais

eservais@ACBusinessMedia.com

Denise Singsime

dsingsime@ACBusinessMedia.com

ForConstructionPros.com Editor

Larry Stewart

Managing Editor

Kimberly Hegeman

Change of Address & Subscriptions PO Box 3605, Northbrook, IL 60065-3605, Phone: (877) 201-3915 • Fax: 847-291-4816 circ.AsphaltContractor@omeda.com

Reprint Services For reprints and licensing please contact Denise Singsime at (800) 538-5544 ext. 1245 dsingsime@ACBusinessMedia.com

List Rental Jeff Moriarty, SVP, Business & Media Solutions Infogroup, Phone: (518) 339-4511 Email: jeff.moriarty@infogroup.com

AC Business Media. Chief Executive Officer

Barry Lovette

Chief Financial Officer

JoAnn Breuchel

Chief Digital Officer

Kris Heineman

Chief Revenue Officer

Amy Schwandt

VP Audience Development

Ronda Hughes

Director of Digital Operations & IT

Nick Raether

Director of Digital Strategy

Joel Franke

Group Content Director

Jon Minnick

• • • • •

www.ForConstructionPros.com/Asphalt

7/20/20 1:14 PM


R

WHEN PRECISION

SIONALS SIONALS SIONALS

T

R

SIONALS IONALS

t OR

MEANS EVERYTHING.

OFESSIONALS OFESSIONALS OFESSIONALS

m

m

WHY CHOOSE AN ALmix BATCH PLANT?

PRECISE CONTROL REGARDLESS OF SIZE • • • • •

Production ranges from 60-600 TPH Installations in 60 Countries Conformance with the most rigorous specifications Comprehensive parts inventory A perfect amalgam of American & European Technology

• • • • •

Precise control of aggregates, RAP, additives, AC and dust Dramatically less waste Change mix design per batch Optional hot mix silos under pugmill for built-in storage Optional external drag and silos for high capacity storage

10106 Smith Road, Fort Wayne, IN 46809 | (260) 672-3004 | ALmix.com ACON0820_08-9_Editor_J.indd 9

7/22/20 8:54 AM


Production Spotlight Sponsored by

MINDS Inc. Software Suite Prioritizes Plant Operator Needs fter years of effort, MINDS Inc. is seeing its innovative suite of software solutions enjoy growing success in the U.S. market. What’s behind our customers’ enthusiasm for our software, and what makes MINDS a leader in advanced customizable asphalt plant control systems? It’s a decision we made at the very beginning, which has consistently guided our product design: we see plant operators as our customer base. We decided that our control systems needed to be perfect servants to plant operators, faithful and extremely competent helpers that would take care of control tasks without ever becoming overreaching, imposing on workflows, or restricting what operators could do. In other words, the system had to mold around the operator rather than asking the operator to mold himself around the system. This decision has impacted every choice we made, from the human in-terface, the signal interface, the type of wiring, choice of the technology platform, and more.

A

AUTOMATION CONTROLS This way of thinking is evident in MINDS’ DrumTronic and BatchTronic asphalt plant automation and control systems. Our reliable, accurate, and customizable software systems were designed after consultations with actual plant operators, and give them the level of fine-tuned automation and control they need to get the most out of their plants. DrumTronic can handle anything from a simple bitumen and aggregates blending-only application

10

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_10_ProductionSpotlight_J.indd 10

to total plant control. BatchTronic helps plant operators understand and customize how actions are scheduled, with many options available to maximize asphalt plant flow rate and accuracy. Assisting the operator, and making his life easier could have cut him off from “feeling” the plant, and this led to the second key decision that guides our productdevelopment ethos: helping the operator stay connected to the physical plant. Making asphalt is a physical and chemical process. The electronic and computer interfaces between the operator and that process are just that: interfaces. We believe that they should be minimized and make themselves forgotten in order to make the underlying physical process stand out clearly. For example, when displaying a flow rate for a weighed conveyor belt, we display ft/min for the speed and lbs/ ft for the weight. If someone wants to check, it is easy to zoom in on that belt, take a measurement of the speed with a tachometer, stop the belt, take a one-foot sample, and weigh it. That makes it easy to see that the product of lbs/ft x ft/min = lbs/min, which is indeed flow rate. CONNECTION TO THE PLANT Another area that significantly helps the operator to stay connected to the

physical plant is our choice of graphic representation. A MINDS system graphical signature is remarkable in its depiction of each plant’s actual look and configuration layout, which our team customizes for each client, to help plant operators more easily visualize their operation. DrumTronic and BatchTronic also do away with vast arrays of numbers in favour of clear symbols to demonstrate important plant metrics. This “more real than life” look is not just done for aesthetic purposes: it helps make the interface disappear. There are many more reasons our software stands out from the crowd, including the choice of an industrial PC architecture rather than PLC, the choices and de-sign of our IO devices, the reduction of electronics or software components to minimize failure rate, new improvements like real-time signal credibility assessment and process models. Visit www.mindsusa.com/ whyminds to learn more.

www.ForConstructionPros.com/Asphalt

7/20/20 4:00 PM


PRODUCTION PRODUCTS ASPHALT PLANTS

Sponsored By

Ammann ACM 140 Prime Asphalt Plant The ACM Prime Asphalt-Mixing Plant is perfect for those who have a number of small jobs in varied locations and where frequent transport is required, and for paving contractors looking to introduce asphalt production into their businesses. • The plant excels at specialty mixes, such as those used for paving tennis courts and running tracks ForConstructionPros.com/20988244

E.T. Clancy Asphalt Plants Gencor MEGAPLANT Gencor designs and builds Megaplants across North America, each producing over 50% RAP and achieving production levels of over 800 tph.

E.T. Clancy Co. has specialized in selling asphalt plants and equipment for 40 years. • Complete inventory of drum plants, batch plants and components • Assist in plant dismantling and set up, as well as trucking ForConstructionPros. com/10086122

Astec SixPack Portable Asphalt Plant

Stansteel Combo Plants Combo Plants combine new, used or reconditioned equipment from different suppliers and manufacturers to create an effective and low cost alternative to buying an all brand new plant. • Can save the contractor $1 million, $2 million or more over the price of an all new hotmix asphalt facility ForConstructionPros. com/10146942

• Incorporates the Ultradrum design which maximizes heat transfer • Use RAP and RAS • Patented positive reclaim system ForConstructionPros. com/10860316

ADM SPL Asphalt Plants Asphalt Drum Mixers Inc. offers its line of SPL hot-mix asphalt plants as an affordable option for contractors with low production requirements. • Includes all necessary components for drum-mixing asphalt production yet fits on a single trailer frame • Available in 60-, 100- and 160-tph production rates and come standard with a drying/mixing drum, wet wash, cold feed bin and surge system • Portable or stationary configurations with the option of automated or manual operation • Customized components include cold feed bins, hot oil asphalt cement tanks (both horizontal and vertical), direct-fired horizontal cement tanks, portable and stationary bag houses, mineral filler systems, RAP systems and more ForConstructionPros.com/12315127

www.ForConstructionPros.com/Asphalt

ACON0820_11-17_Plants_J.indd 11

The Astec Six Pack HMA facility is designed for portability and productivity. The standard setup comes with the Double Barrel drum mixer, cold feed, scalping screen with inclined conveyor, baghouse, surge bin, drag conveyor and control house. • Can produce up to 400 tons of warm mix asphalt per hour with up to 50% RAP • Compact, maneuverable plants with a wide range of options • Self-erecting features for easy moving and setup • Choice of 200, 300 and 400 tons per hour • Factory installed bags and cages save time and manpower • Complete cold feed unit contained on one load • Low profile baghouse for easy travel • Built-in bulkheads protect machinery ForConstructionPros. com/10086334

AUGUST 2020 ASPHALT CONTRACTOR

11 7/20/20 1:20 PM


PRODUCTION PRODUCTS Sponsored By

ASPHALT PLANTS

Bergkamp PMA and CRMA Batch Plants Bergkamp Bituminous Solutions offers batch plants for the modification of asphalt with polymer or crumb rubber. • Polymer Modified Asphalt (PMA) and Crumb Rubber Modified Asphalt (CRMA) • Equipped with a pre-heat tank for very quick and efficient heating, the plant ensures the availability of hot neat asphalt • Two mixing tanks can be operated in parallel for continuous production • Single or multiple passes can easily be set up to ensure proper homogenization prior to pumping the PMA or CRMA out to digestion tanks • Fully automatic system is 100% PLC controlled • Capacities from 6.6 to 13.22 and 11 to 22 tph • 13.22-tph plant model is mounted on a 40-ft. skid frame ForConstructionPros.com/12315023

ALmix Compact Series Asphalt Plants The ALmix Compact Series is designed for portability and a small footprint, this simple yet rugged design meets the needs of the small to mid-size contractor. • Judicious control of plant frills versus plant cost has yielded a Series of asphalt plants which allow the long time asphalt paver to become a first time asphalt producer • The “Compact Series” is offered in production ranges from 60 TPH to 140 TPH ForConstructionPros. com/20866312

CMI Magnum 150 Counterflow DrumMix Asphalt Plant The Magnum 150 is a super portable 150tph counterflow drum-mix asphalt plant with up to 30% RAP capability.

• To enhance portability and install, a new one-piece cold feed unit complete with scalping screen/aggregate weigh conveyor, bag house and SE60 selferect hot mix storage system have been designed to allow rapid installation

Dillman Voyager Plant Dillman introduces the 200-tph Voyager plant designed for producers who require a plant made to move several times during the paving season. • Can be dismantled, moved to a new site and set up and ready for production in about five work days

• Uses field-tested components proven to perform in a variety of conditions • Built around the Dillman unified drum • Includes a 50-ton SEB to ensure a quick set-up without need for cranes ForConstructionPros. com/10616687

Astec BG 1800 Modular Batch Plant The BG 1800 Batch Plant series features a modular design that is fully customizable to meet the needs of the plant owner. • Can produce up to 70% RAP • Easy set-up • Perfect for municipalities who need to produce many different mix designs ForConstructionPros. com/21064699

ForConstructionPros. com/20867029

Lintec Ixon Asphalt Plants The LX series plants are offered in 80, 120, 140 and 160 TPH versions. • All models are offered with independent cold feed systems or as a combined unit with all components mounted on a tri-axle fifth wheel chassis • A full line of asphalt storage tanks (with hot oil heaters), asphalt mix silo systems, mineral filler systems and RAP processing equipment are available • Standard equipment included in all models: · Dynamic Weighing System · External Mix System (Twin Shaft Mixer) · Baghouse Filter · Fines Return System · RAP Collar · 3 or 4 Bin Cold Feed Systems · Drag Slat Conveyor with Batcher · Computerized Control Cabin ForConstructionPros.com/20866237

12

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_11-17_Plants_J.indd 12

Ahern Asphalt Plants 100%Texas built heavy duty portable asphalt plants. • American workforce engineers, welds and assembles custom built hot mix asphalt plants ForConstructionPros. com/20866311

www.ForConstructionPros.com/Asphalt

7/22/20 10:41 AM

I


IMAGINE YOUR DREAM

YOUR BUSINESS STARTED AS A DREAM, TO GROW AND PROFIT. To get the personalized attention you want to help you on your way. The customization you need to meet your business’s specific production goals. Consult with one of our specialists today to help configure just the right asphalt plant for you. Start your custom plant design today.

FULFILL YOUR DREAM

260-637-5729 • admasphaltplants.com

ACON0820_11-17_Plants_J.indd 13

7/20/20 1:20 PM


PRODUCTION PRODUCTS Sponsored By

ASPHALT PLANTS ADM EX 8844 Asphalt Plant

ADM EX10248 Asphalt Plant The rugged 275 to 350 tph EX10248 Asphalt Plant from ADM meets production capacity demands and strict environmental regulations. • The plant's single-drum counterflow system uses the latest in innovative technology, resulting in the longest aggregates drying and mixing times in the industry

The ADM EX Series Model EX 8844 asphalt plant allows contractors to increase capacity with up to 50% RAP in a compact package. • Counterflow technology allows for maximum heat transfer and fuel efficiency via separate drying and mixing zones • Efficient plant design provides single-operator capability, easy troubleshooting and simple on-site maintenance while virtually eliminating blue smoke and hydrocarbon emissions for clean operation • Optional plant control add-ons allow for greater customization, uptime and efficiency, and are available for use on any asphalt plant, regardless of whether the plant is manufactured by ADM or any other manufacturer

Dillman Nomad Portable Hot Mix Asphalt Plant

Ammann ABP HRT Asphalt-Mixing Plant The ABP HRT (High Recycling Technology) plant is an ideal fit for asphalt manufacturers who need to incorporate large proportions of RAP without sacrificing production capacity and quality. • The HRT is a “two-in-one” plant featuring both warm and cold recycling systems that can be used in combination ForConstructionPros. com/20988239

Astec Voyager 140 Portable Asphalt Plant The Voyager 140 can produce up to 140 tph with up to 50% RAP. • Portable plant can be transported and set up and tested in about a weeks time due to fixed duct work • Double Barrel Drum with standard V-Flights provide uniformity of aggregate veil for effective and efficient heat transfer ForConstructionPros. com/21064763

14

M an

ForConstructionPros.com/21039896

ForConstructionPros. com/20987919

Gencor G Series Asphalt Plant The Gencor G Series is the latest innovation in small portable hot mix plants providing asphalt producers and contractors with all the features of Gencor’s award winning Ultraplant in a smaller compact highly mobile plant that can be erected and operational virtually anywhere. • The firing end of the burner extends into the dryer beyond the mix section so as not to overheat the aggregates and liquid asphalt

I

Dillman offers the Nomad series of portable asphalt plant, available in three sizes and designed for production capacities of 80, 130, or 175 tons per hour. • Intended for portability, durability and reliability, Nomad plants meet

D A Au

the demands of a variety of small, medium and large projects that require quality hot mix asphalt ForConstructionPros. com/12317449

A W

ForConstructionPros. com/21108631

Li In D

Phoenix RAPpro Recycled Hot Mix Production Plant The RAPpro is an economically priced hot plant specifically designed to efficiently produce high quality HMA utilizing 100% RAP. • This plant utilizes a revolutionary multi-tube in-direct heated, continuous flow patent pending drum design • When coupled with PelletRAP rubberized binder material used as a RAP rejuvenator, very high quality mixes at extremely economical pricing are produced ForConstructionPros.com/21075831

ASPHALT CONTRACTOR AUGUST 2020 www.ForConstructionPros.com/Asphalt

ACON0820_11-17_Plants_J.indd 14

*C

7/20/20 1:21 PM

SA


More Production. Better Accuracy. Higher Profits.

96%

Better Reliability*

92%

Improved Accuracy*

81%

Better Usability*

* Compared to previous solution - User survey - Reliable Asphalt Workshop - Louisville, KY - January 2019

MINDS Data Suite is a complete software and hardware toolset for managing and optimizing asphalt plant production. I N D U S T RY S TA N DA R D

I N D U S T RY S TA N DA R D

DrumTronic Asphalt Drum Plant Automation & Control

BatchTronic Asphalt Batch Plant Automation & Control

AWA R D -W I N N I N G WO R L D F I R S T

LiveLoader In-Cab Production Dashboard for Loaders

S TA N DA LO N E O R I N T E G R AT E D

LoadOut Truck Loading Management Software

SALES INQUIRIES:  1-866-971-2980

ACON0820_11-17_Plants_J.indd 15

NEW RELEASE

BurnerControl Multi-actuator, precision burner control software

WITH MOBILE APP

Tessera Ticketing Job Ticketing and Management Software

 contact@mindsusa.com

 mindsusa.com

7/20/20 1:21 PM


PRODUCTION PRODUCTS Sponsored By

ASPHALT PLANTS

Ammann ACP 300 ContiHRT Asphalt Plant The ACP 300 ContiHRT Asphalt-Mixing Plant is capable of producing mix consisting of more than 60% RAP. • The continuous plant features Ammann’s recycling technology which maximizes RAP utilization and meets the world’s most stringent emissions guidelines • Gentle pre-heating of the RAP, compared to traditional cold feed to superheated virgin aggregates, prevents thermal stress on the asphalt concrete content and ensures a highly homogenous final mix • Plant incorporates a RAP dryer for the addition of recycled materials and a separate cold recycling feed ForConstructionPros. com/21091313

Bu L

Reliable Asphalt Products Used/ Reconditioned Equipment Reliable Asphalt Products offers equipment that can be purchased on an "as-is" basis or reconditioned for specifications. • List thousands of plants and components of all types to meet various requirements • Batch plant, drum plants, parts and components ForConstructionPros.com/10084584

CMI Cedarapids Magnum 250 Counterflow Drum Mixer Cedarapids Magnum 250 Super-Portable counterflow drummix plant can produce up to 250 tph with 35% RAP capability. • Upgrades include new high efficiency drying and mixing zones, railroad bearing trunnion roller assemblies, direct drive gearmotors and drum insulation and cladding as standard • To aid a rapid installation time, the Magnum Super-Portables are fitted with large full width chassis support pad assemblies to distribute the load evenly ForConstructionPros.com/21109868

DESIGN. ENGINEERING. M A N U FA C T U R I N G . SERVICE. If you store liquid asphalt, blend asphalt emulsions or polymer modified asphalt, Heatec is your one source for everything from tank farms to asphalt terminals. Heatec will design and build a system for you that is efficient, durable and easy to use and provide world class parts and service support 24/7. Learn more at www.heatec.com.

16

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_11-17_Plants_J.indd 16

www.ForConstructionPros.com/Asphalt

7/20/20 1:21 PM


Burner Fuel For Asphalt Plants LIQUEFIED NATURAL GAS

Paving the way to cleaner skies with America’s Natural Gas Interested in decreasing your unscheduled downtime and lowering your maintenance costs? Contact us! 214-500-6876 | Blue Roads Solutions, LLC | 2523 Bomar Ave, Dallas, TX 75235 www.blueroadssolutions.com

ACON0820_11-17_Plants_J.indd 17

7/20/20 1:21 PM


PRODUCTION PRODUCTS Sponsored By

PLANT COMPONENTS Hydronix Hydro-Probe

Astec SEB SelfErecting Bin Astec's Self-Erecting Bin (SEB) meets NTEP Handbook 44 specifications. • Portable unit combines five major plant functions into a single load • Drag conveyor transports mix to the bin where it's batched, weighed and loaded onto trucks • Also includes plant's control center • Entire system self-erects in less than 15 minutes ForConstructionPros. com/10077072

ADM Cold Feed Bins Offered in both stationary and portable designs, cold feed bins from Asphalt Drum Mixers Inc. (ADM) are engineered and constructed to withstand abrasive aggregates and other jobsite abuse. • ADM cold feed bins are equipped with tapered sidewalls and a specially designed belt feeder to virtually eliminate plugging and bridging problems

• Material flow enhanced by a fully adjustable radial gate system with self-relieving tapered discharge opening • Available in single bin and multi-bin configurations • Compatible with any control system and can be retrofitted to add extra tonnage capacity to any brand of cold feed systems ForConstructionPros. com/10147971

18

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_18-32_PlantComp_J.indd 18

The latest version of the Hydronix Hydro-Probe has been re-engineered to take advantage of increased microprocessor speeds and memory. • Designed for measuring moisture in bins and on conveyors • Offers additional analogue output • Allows the simultaneous output of moisture and temperature • Sensor’s filtering and averaging functions have also been enhanced to give greater flexibility when optimizing the sensor’s performance in continuous type applications such as conveyor belts ForConstructionPros.com/10078809

OMI Ecosorb Asphalt Additives Ecosorb additives are a natural and effective solution for significantly reducing hydrocarbon emissions as well as eliminating organic or inorganic odors associated with asphalt and fuel oils. • Does not contain amines • Will not react negatively with your binder ForConstructionPros.com/10088966

Stansteel Metering and Proportioning System

Ace RAPWrangler The Ace RAPWrangler recycling systems produce an even reclaimed asphalt pavement (RAP) size for introduction to drum mixers or batch plants, shredding RAP from football-size chunks to suitable gradations as small as an inch or less. • Processes RAP at a rate of up to 250 tph • Designed to eliminate the need for off-site precrushing of recyclable asphalt products • Available in three sizes to meet users' tonnage and site requirements • Single rugged gearbox • Powered by a 30-hp or 50-hp TEFC motor

Stansteel's custom progressive metering and proportioning system conversions for existing batch plants will help increase the recycle percentage and decrease negative environmental impact. • With the progressive metering system, RAP is added directly to the pugmill over a gradual period of time and does not slug feed as in the typical RAP bin/chute feeders that meter to the weigh box ForConstructionPros. com/10146948

Co

ForConstructionPros. com/10076816

Meeker Hot Oil Heater Meeker's heavy-duty helical coil thermal fluid heater features a sabre stack heat recovery system. • PLC heater controls • Off-set expansion tank • High flow centrifugal pump with mechanical seal • Test fired at factory prior to shipping

C (

ForConstructionPros.com/10086231

w

www.ForConstructionPros.com/Asphalt

7/20/20 1:32 PM


A NEW CHOICE

IN SILO STORAGE Massive Drag Conveyors Up to 600 TPH

Removable Flop Gates

Hinged Safety Doors Eliminates Pinch Point at Air Cylinders

Easily Matches Up to Other Brands

Recessed Wall Liners

Safety Gates Come Standard

Call us toll free! (888) 333-0323 www.meekerequipment.com

Your Preferred Asphalt Equipment Resource The Meeker Family

Meeker Equipment Headquarters 4381 Front Mountain Road Belleville, PA 17004 Phone: (717) 667-6000 Fax: (717) 935-2389 E-mail: info@meekerequipment.com

ACON0820_18-32_PlantComp_J.indd 19

7/20/20 1:32 PM


PRODUCTION PRODUCTS PLANT COMPONENTS

Sponsored By

Reliable Asphalt Products RAP/RAS Bins Reliable Asphalt Products RAP/RAS Systems combine innovative technology with solid construction to deliver a highly versatile plant component. • Allows contractors the ability to maximize both RAP and shingles while maintaining precision weight measurements for both products • Each system can be fully customized to include one to three RAP bins as well as up to two load cell equipped RAS bins for a total of five bins • Portable, skid mounted, and stationary arrangements available

Maxam Baghouses Maxam's baghouses are available as stationary, portable or transportable. • Pulse jet cleaning • Heated valves and compressed air header • Laser cut tubesheet • 800-°F interior paint • Pitched roof • Lightweight top doors • Tool-less entry and access doors • 100-step quality assurance inspection ForConstructionPros. com/10146846

ForConstructionPros.com/10723211

Gencor Ultrafoam GX2 System The Gencor Ultrafoam GX2 can achieve consistent foaming at varying production rates without use of a powered mixing device • AC and water can be introduced at widely different flow rates and pressures • Compressed Air Purge releases remaining water in the piping and hose between the unit mounted on the drum when temperatures approach freezing • Water Flow Alarm senses water and transmits alert to the operator if loss of water flow to the unit occurs • Weatherproof enclosure provides freeze and dust protection to parts ForConstructionPros.com/10223065

Kenco Engineering, Inc

SYST with ope inte swit as s ope inst hea cou secu

You spent big money on your equipment... MAKE IT LAST! Protect your investment with Kenco longer life wear parts. Kenco offers innovative products for the aggregate, asphalt and road building industries.

Call Kenco and let our application specialists protect your investments: Main Customer Service: 800-363-9859 Southeast Customer Service: 888-350-5817 Visit our web site: www.kencoengineering.com

20

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_18-32_PlantComp_J.indd 20

www.ForConstructionPros.com/Asphalt

7/20/20 1:32 PM

info (56 ww


WHILE THE ASPHALT RUNS HOT, THIS IS HOME AWAY FROM HOME SYSTEMS control centers are designed with attention to rugged construction, operator comfort, and safe, logical integration of plant controls and switchgear. Custom buildings sold as shell only or with full turnkey operability. Most structures include installed electrical outlets, lighting, heating and air conditioning, cabinets, countertops, controls, and outdoor security lighting.

Innovative custom-manufactured buildings are available in portable, stationary or relocatable models, as well as single-level, two-story, and split-level designs. All custom building specs considered. Structures can be used as asphalt plant control centers, offices, portable laboratories, weigh shacks, barge dredging control centers, switchgear enclosures, and more.

Some available features include: • All-steel welded frame construction • Fully insulated floor, sidewalls and roof • Acoustical ceiling panels • Air conditioning and electrical heat • External vertical steel siding • White interior glass board wall paneling Many additional options offered. All custom options considered.

info@systemsequipment.com (563) 568-638 7 www.systemsequipment.com

ACON0820_18-32_PlantComp_J.indd 21

7/20/20 1:32 PM


PRODUCTION PRODUCTS Sponsored By

PLANT COMPONENTS

Maxam Solo Drum Mixer The Maxam SOLO Drum's patented technology advances counter-flow technology to a new level of efficiency. • Separates the control of the exhaust stack temperature from the control of the mix temperature with the MAXAMizer heat Recovery System • Directly heats the RAP without superheating the virgin aggregate and without producing blue smoke with the RAPTOR Recycle System ForConstructionPros.com/10280224

Tarmac Dryers Tarmac’s counter-flow dryers offer longer combustion flights for better flame development. • Moving slinger belt to adjust gas temperature to baghouse • Three RAP entry location options for higher RAP percentages • Insulation available • Trunnion or chain drive ForConstructionPros.com/11564655

PROVEN FOR THETHE PROVENEXPERTISE EXPERTISE FOR ASPHALT RECYCLING INDUSTRY

ASPHALT RECYCLING INDUSTRY

The RC Series RAP Crusher, ruggedly The to RCoutperform Series RAP Crusher, built and outlast. ruggedly Schutte built to outperform and outlast. Schutte Hammermill’s heavy duty hammer Hammermill’s heavy duty hammer mills are designed specifically for the challenges of processing asphalt road mills are designed specifically for the millings; producing perfect particle size challenges of processing asphalt road in a single producing pass, millings; perfect particle size without the need in a single pass, for screening.

Astec Double Barrel XHR

ForConstructionPros.com/12191409

CMI E3 RAP-STAR Series Drum Mixer The E3 line of continuous counter-flow drum mixers marks the newest technology in drum design, combining high productivity and high RAP percentage capabilities with simplicity and reliability. • Available as portable drums in capacities from 200 to 500 tph and as relocatable and stationary drums in capacities from 200 to 600 tph • Continuous full-length main shell is surrounded by an outer RAP drum that fully heats RAP before mixing it with virgin aggregate and AC • Capable of handling high percentage RAP mixes • Available with trunnion drive or chain drive • Reduced fuel usage due to efficient heat transfer • Reduced cost per ton through increased RAP usage • Easy retro-fit to existing CMI, Cedarapids and Standard Havens drum frames ForConstructionPros.com/12320479

Maxam Accu-Flo Asphalt Additive System

without the need

Contact us today to for screening. find out more about Contact ushelp today to how we can find outyour more about improve process! how we can help

improve your process! THE LEADERS IN SIZE REDUCTION, SINCE 1928 www.hammermills.com | info@hammermills.com | 1-800-447-4634

THE LEADERS IN SIZE REDUCTION, SINCE 1928 www.hammermills.com | info@hammermills.com | 1-800-447-4634

Vis

Astec's Double Barrel XHR (eXternal mixer, High RAP) aggregate dryer can produce up to 400 TPH with up to 65% RAP/RAS. • Employs two mixing technologies: an outer chamber on the drum and an external mixer • V-Pack Stack Temperature Control System maintains as low an exhaust temperature as possible when running a high RAP/low virgin mix • Stainless-steel drum and combustion flighting withstand the higher temperatures associated with running high RAP

• • • •

Maxam Accu-Flo Asphalt Additive System helps asphalt plants save on energy costs by removing the need to heat the additive tank. Heats only the metered additive Handles the most viscous additives Integrates with existing plant controls Installs easily - fully assembled in a steel, skid-mount

ForConstructionPros.com/12321030

22

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_18-32_PlantComp_J.indd 22

www.ForConstructionPros.com/Asphalt

7/20/20 1:32 PM

Mee Visio cont ensu your • Im in • Do w te • Vi sig • Ke of • Lo • Lo • Sa th • Op

ForC com


Meeker Liquid Vision Meeker Equipment offers its Liquid Vision digital tank monitoring and valve control system that is designed to ensure safety and reliability when filling your tanks. • Immediate tank level inventory at a glance • Does not expose workers to hot air temperatures on tank • Visual and audible signals for tank levels • Keeps workers aware of tank overfill conditions • Local or remote control • Low-level alarms • Saves time when changing mixes on the fly • Optional smartphone interface ForConstructionPros. com/12316216

Rock Systems Portable RAP Bin & Weigh Conveyor Rock Systems Portable RAP Bin & Weigh Conveyor contains a complete two-bin RAP feeder & a portable 24-in. x 65-ft. portable weigh conveyor. • 2 bin RAP feeder is complete with 7-ft-8-in. x 12-ft. long hopper openings • 30-in. wide belt feeders with 7.5 h.p. electric motor drives • Portable undercarriage with adjustable height, pneumatic tires, lights, flaps and air brakes ForConstructionPros.com/20866689

Gencor Cold Feed Systems Gencor’s cold feed systems are ruggedly built for years of use under the harshest conditions. • Unique bin design provides steep sided tapered bin walls and a selfrelieving throat to virtually eliminate bridging and material flow problems • A rugged rack and pinion gate design provides easy material height adjustment to suit a variety of material gradations • All feeders are available with either eddy current or variable frequency drive to assure accurate flow at varying production rates, and also include two material flow indicators ForConstructionPros.com/20866382

RIGHTValve RIGHTPrice RIGHTNow! Dependable, Economical, Available …

Valve Types ■

Since 1892, Homestead continues to be the most reliable manufacturer of asphalt valves. With cast iron and ductile iron material options, we offer a complete source of valves for any liquid asphalt application. Our full line of hot-jacketed 2-way shutoff & 3-way diverter valves provide a ready solution to meet your flow requirements. Homestead’s cutting-edge actuation design allows you to easily add actuators to your existing Homestead valves, in-line, without modification.

■ ■ ■

Valve Materials ■ ■ ■

Our fully stocked warehouse of valves and actuators offers you security in knowing that the valve you need is only a phone call away.

®

ACON0820_18-32_PlantComp_J.indd 23

Pneumatic Electric Open-Close Modulating

610-770-1100 asphaltvalves.com Fax: 610-770-1108 sales@homesteadvalve.com

www.ForConstructionPros.com/Asphalt

Cast Iron – to 450° F Ductile Iron – to 550° F High Temperature Seals

Actuator Types ■

THE ASPHALT VALVE EXPERTS

Full Port – Standard Port 2-Way Shutoff and 3-Way Diverter Patterns 1"-8" Flanged and 1/2"- 4" Threaded Steam/Hot Oil Jacketed Transflo Plug Proportioning Plug

©2020 Olson Technologies, Inc.

AUGUST 2020 ASPHALT CONTRACTOR

23 7/20/20 1:32 PM


PRODUCTION PRODUCTS Sponsored By

PLANT COMPONENTS

Gencor RAP Feed Bins

• • • • • •

Gencor RAP feed bins are designed to eliminate material bridging, with steep sided ¼-in. tapered walls, self-relieving throat and welded beater plates on the sides of the bins. With the rack and pinion gate design, material height can be easily adjusted to suit any feed rate Variable speed drives assure steady consistent flow at varying production rates Feature unitized heavy I-beam construction and are available in portable, stationary, or skid-mounted configurations Dual no-flow sensors Variable-Frequency or Eddy Current drive system Lifetime lubricated idlers Self-cleaning tail pulley Tail shaft tachometers Quick Disconnect wiring (optional)

ForConstructionPros. com/20988323

Homestead Series 600SJ Lubricated Asphalt Plug Valves The Series 600SJ Lubricated Plug Valve delivers cost effective quick opening and closing with a tight, leak-proof closure for hot mix asphalt plants and roofing manufacturing. • Available in standard rectangular port and full rectangular port, 2-way shutoff and 3-way diverter designs • Available end connections are threaded (½ -in. - 4-in.) and flanged (1-in. - 8-in.) • Additional options include Transflo and Proportioning plug designs • Standard material is high tensile ASTM A126 Class B cast iron ForConstructionPros.com/20866386

ADM RAP Recycle System Improve the cost efficiency of your plant and boost RAP utilization with the RAP Recycle Systems • Available in four different portable and stationary models, designed to tackle the many mix specifications you handle • System allows your operation to produce hotmix asphalt with as much as 50 percent recycled material • Multiple capacities available to suit almost any operation • All-welded recycle bin can be reinforced with optional grizzly bars for superior durability • Steeply sloped sidewalls prevent material plugging and bridging • Standard 45- to 65-ft. long, heavyduty weigh conveyor with channel frame provides extra stability

CWMF Cold Feed Bins CWMF’s cold feed systems are designed to withstand the harsh elements of an HMA facility in portable, stationary and skid-mounted systems. • Unique feeder belt mount design allows for belt removal/replacement without requiring you to remove the feeder • ¼-in. bin wall construction • 10-ft. x 14-ft. & 10-ft. x 16-ft. are standard sizes • 60° sloped walls minimize build-up • Adjustable slide gates to allow accurate metering • Self-relieving throats allow for proper flow of material • Multiple options available upon request

ForConstructionPros. com/20866326

Pugmill Systems Skid Plants Pugmill Systems offer several models of skid plants from 5 TPH-1500 TPH • Site specific plant arrangements • Push button or touch screen controls • Options: Asphalt pump + meter, water pump meter, silo systems, feed hoppers, conveyors • Low-pro design available for shipping containers ForConstructionPros. com/21011778

24

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_18-32_PlantComp_J.indd 24

ForConstructionPros. com/20976919

Astec Warm Mix Systems The benefits of warm mix asphalt, such as reduced energy consumption, lowered emissions and elimination of visible smoke, are well-known in the asphalt paving industry and the latest generation of the Astec warm mix system simplifies production of warm mix asphalt. • The Astec warm mix system achieves a lower temperature at a lower cost by eliminating the need for additives or special asphalt cement • Instead, the Astec warm mix system injects a small amount of water into the liquid AC to create microscopic steam bubbles • These small bubbles act to reduce the viscosity of the liquid AC, allowing the mix to be worked at lower temperatures ForConstructionPros.com/20989627

www.ForConstructionPros.com/Asphalt

7/20/20 1:33 PM


r

ACON0820_18-32_PlantComp_J.indd 25

7/20/20 1:33 PM


PRODUCTION PRODUCTS Sponsored By

PLANT COMPONENTS Rains-Flo Sealing Systems

CWMF Dust-Eater Baghouse The Dust-Eater baghouse is offered in a portable or stationary configuration, ranging in size from 10,000 CFM to over 100,000 CFM • 3/16-in. shell construction • Inlet deflectors • Side wall louvers • 7-ft. x 10-ft. x 12-ft. inlet knockout box is equipped with a series of deflectors and louvers minimizes the amount of larger fines (+200 mesh) from entering the bag chamber. This allows the unit to collect the finer particulate for efficiency. It also aids in prolonged bag and component life. • 2 ½-in. spacing between bags • Hose-less valve manifold ForConstructionPros. com/20976920

PHCo Distributor Truck Electric Tank Heaters Process Heating Company (PHCo) Lo-Density Rigid Tubular Drywell Tank Heaters provide a more efficient and safe form of heat for asphalt and emulsion distributor truck tanks than fossil-fuelfired systems. • With the Lo-Density heating system, the operator simply plugs the heater in at the end of the day, and it maintains the emulsion at the correct temperature overnight or over a weekend • With no open flame, these heaters eliminate concerns about the everpresent dangers associated with lighting and operation of burners • In addition to improving productivity, safety and asphalt/emulsion quality, Lo-Density electric heat also can reduce operating costs for distributor trucks ForConstructionPros. com/20996613

26

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_18-32_PlantComp_J.indd 26

High performance and multi-purpose packing designed for general use including both water and petroleum base slurries, fuels, organic chemicals, resins, solvents and paints, asphalt and asphalt emulsions. • Can replace expensive mechanical seals in many applications • Specified and used by major manufacturers of equipment • Solvent extraction of oil from soybean flake, cottonseed meal. ForConstructionPros.com/21011784

MAXAM Transporter Bintop Conveying System

Kenco Engineering Baghouse Wear Parts

The Transporter Bintop Conveying System rides on rails, eliminating troubles associated with conveyors; and the Oxi-Free oxygen purge system provides an eco-friendly way to remove oxygen and seal the silo for effective overnight storage. • Long term storage without oxidation • Lower maintenance cost • Lower initial cost • Increase operating income • Retrofittable on any system

Kenco Engineering offers Coupling Shafts, Dry Bearings, and Pipe Castings to help solve wear problems in asphalt plant baghouses. • Kenco Coupling Shafts and Dry Bearings are designed to couple augers in asphalt plant dust collection systems • They are cast from exclusive Kenco K-Chrome 500 Brinell alloy and provide exceptionally longer wearlife than conventional chilled iron bearings

ForConstructionPros. com/21012043

ForConstructionPros. com/21010115

W

CO

Crown Equipment IMS High Capacity Tracked Pugmill The IMS Track Pugmill is a refined affordable track mounted machine that offers a quick fully hydraulic setup between transport and operating mode the advantage of self loading onto transporters and site mobilization. • Tracked pug mill • Twin shaft mixer with anti-surge function • Gauged surge tank to maintain consistent flow to mixing chamber • Adjustable 16-ft. (max) height allows direct truck loading or great stockpiling capability ForConstructionPros.com/21037851

Rapat Enclosed Conveyor Systems Rapat's complete line of enclosed conveyors helps eliminate dust emissions, providing a solution for industries looking to meet OSHA’s updated silica-related regulations. • The enclosed-frame conveyor with CEMA troughing and return idlers provide increased employee safety, even in the toughest of environments • Features include, tool-less top covers, which can easily be removed, and bolt-on bottom covers for a totally enclosed system and a greater ability to control dust

CO Sp spe co ma and the

CO

CO

ForConstructionPros.com/21021947

www.ForConstructionPros.com/Asphalt

7/20/20 1:33 PM


WE DO THIS... CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

ASPHALT PLANT CONTROLS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

INSPECTION

ULTRA-PORTABLE

CONTROLS

ASPHALT PLANTS SERVICES No other North American manufacturer ULTRA-PORTABLE INSPECTION CONTROLS offers more options than Astec. ASPHALT PLANTS SERVICES

CONTROLS

ULTRA-PORTABLE INSPECTION controls for asphalt plants means ASPHALT PLANTS SERVICES

CONTROLS in Specializing wePARTS specialize in controls for your plant. The Astec in-house controls team works full time to develop solutions to make operating your plant easier and more efficient, and deliver innovations that take your operation to the next level. CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

INSPECTION SERVICES

ULTRA-PORTABLE

PARTS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

Double Barrel // DBX // DBXHR // UniDrum CONTROLS

ULTRA-PORTABLE INSPECTION 5 BURNER CONTROLS OPTIONS ASPHALT PLANTS SERVICES

Phantom // Talon II INSPECTION //SERVICES Fury CONTROLS WhisperCONTROLS Jet // Versa Jet INSPECTION CONTROLS

SERVICES INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS ULTRA-PORTABLE ASPHALT PLANTS ULTRA-PORTABLE ASPHALT PLANTS

2 BAGHOUSEINSPECTION OPTIONS ULTRA-PORTABLE CONTROLS Pulse Jet // ReverseSERVICES Pulse

ASPHALT PLANTS

INSPECTION SERVICES INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS ULTRA-PORTABLE ASPHALT PLANTS

2 SILO OPTIONS

Long-term Silos // Short-Term Silos INSPECTION ULTRA-PORTABLE CONTROLS

ACON0820_18-32_PlantComp_J.indd 27

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

ASPHALT PLANTS ULTRA-PORTABLE ASPHALT PLANTS

CONTROLS

INSPECTION SERVICES

PARTS

INSPECTION CONTROLS 4 DRUM OPTIONS SERVICES

CONTROLS

CONTROLS

PARTS

PARTS PARTS PARTS PARTS

PARTS

PARTS PARTS

PARTS

SERVICES

ASPHALT PLANTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

PARTS

7/20/20 1:33 PM


PRODUCTION PRODUCTS Sponsored By

PLANT COMPONENTS CWMF Revolution D Drum The Revolution D drum mixer is known for its heavy duty, rugged design. • This line of rotary dryers are used for asphalt, sand and specialty dryer applications • CWMF Revolution D rotary drums are manufactured for portable and stationary applications

Lo pr •

ForConstructionPros.com/21095636

F

A co a to •

THE

CLEAR CHOICE FOR 2020

PARATHERM HEAT TRANSFER FLUIDS

Troxler Moisture Measurement System The Troxler Moisture Measurement System (MMS) is a device that continuously measures the moisture of the virgin aggregates for continuous mix drum asphalt plants. • Continuous moisture monitoring helps reduce variations in asphalt content which leads to cost savings and quality improvements • Lets you know moisture value in virgin aggregates to within ±0.5% • Contactless system, so no wear components • Maximize potential with seamless integration with software providers • Fewer stockpile measurements • Utilizes trusted technology Troxler is known for in the asphalt and geotechnical industries ForConstructionPros. com/21016717

2009 Renaissance Blvd., King of Prussia, PA 19046 USA Int’l: +1 610-941-4900 Fax: +1 610-941-9191 info@paratherm.com

F c

Paratherm.com

28

ASPHALT CONTRACTOR AUGUST 2020 www.ForConstructionPros.com/Asphalt

ACON0820_18-32_PlantComp_J.indd 28

7/20/20 1:33 PM


Loadscan Conveyor Volume Scanner Loadscan’s Conveyor Volume Scanner (CVS) precisely measures and reports on bulk flow to give you ultimate production control. • Make better decisions based on accurate, real-time data feeds and monitor and operate your conveyor belt on the fly, wherever you are • Supplies volume measurement, reports tons per hour, enables you to set batching and job staging ForConstructionPros.com/21043683

Astec Fury Burners A robust build and simple, accessible construction makes the Astec Fury burner a low cost alternative to more expensive total air designs. • Designed to put 50% more combustion air through the burner than competitive designs with the balance of the combustion air drafted in around the burner nose. This means higher combustion quality, better emissions and higher combustion efficiency throughout the entire firing range • Rapidly swirling, high-energy air is the key to the Fury burner’s efficient combustion. The swirling air and flame are created by the fixed internal spin vanes, high-pressure blower and high velocity nose

Libra’s New Integrated GPS/Asset Management Solution Sentinel is the construction industry’s premier, real-time fleet management, E-ticketing, and asset tracking solution.

Seamless Integration with Libra Solution Suite Eliminate the hassle of interfacing with 3rd parties. Have job data & E-tickets available at your fingertips.

• The Fury burner cleanly and efficiently burns oil or gas. Its compact flame makes it compatible with virtually all drum designs without complicated drum modifications • Each burner is thoroughly tested before leaving the Astec burner facility to make start-up at your facility as fast as possible • For the most reliable oil light-off, even under cold and harsh conditions, the Fury burner is supplied with Astec’s exclusive heat tracing and insulation system on heavy oil burners ForConstructionPros. com/21049920

www.ForConstructionPros.com/Asphalt

ACON0820_18-32_PlantComp_J.indd 29

Mobile App or Vehicle Mounted Options Track assets using a physical GPS tracking device or use your own device with the Sentinel Mobile Application for Android and iOS. Unparalleled Accuracy Sentinel provides faster position updates than other solutions. The result is better visibility of the fleet, improved asset utilization, and greater profits.

www.librasystems.com ● 215.256.1700

AUGUST 2020 ASPHALT CONTRACTOR

29 7/20/20 1:33 PM


PRODUCTION PRODUCTS Sponsored By

PLANT COMPONENTS

Meeker Transfer Conveyor The Meeker 500-TPH transfer conveyor features bolt in Ni-Hard cast floor liners, removable flop gate system, electric heat on floor, Rex planetary gearbox, bin indicator on headshaft and split return rollers. ForConstructionPros.com/21039189

KPI-JCI 9201 Sand Processing Plant

KPI-JCI - Astec Mobile Screens

Astec Inc. Versa Jet Burner Ideal for retrofit applications or anytime versatility is required, the Astec Inc. Versa Jet Burner features an adaptable design is compatible with virtually all drum designs without complicated drum modifications. • One versatile platform can be quickly configured to fire at 25, 35 or 50MM BTU/hr • Highly adaptable burner combines three burner packages in one platform which can be easily adapted for the system at the install site • The unique platform of the Astec Versa Jet burner permits quick delivery and setup which minimizes downtime while maximizing profitability • Streamlined design ensures that these burners are ready to ship to your site quickly and can be installed with minimal modifications needed • 25, 35, and 50MM BTU/hr • Low power – All 3 models are 25 hp • Base burner does not include the fuel train, ideal when a functional fuel train is already on-site and available to be used • Configurable – optional fuel trains can be either component only or a straight-line, rack mount • Designed for quick delivery ForConstructionPros. com/21121730

30

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_18-32_PlantComp_J.indd 30

Kolberg-Pioneer, Inc. has expanded its sand processing plant line to include the new 9201 model. This system is designed to dewater and fine-tune sand to a level not typically possible with traditional sand-dewatering equipment, while also using less water. • The custom-built systems are available in portable, semi-portable and stationary configurations with various types and quantities of cyclones, pumps and dewatering screen sizes • The customizable unit that can be built to fit any application • Adjustable features like the deck liner and discharge dam • Easy-to-replace parts for quick and simple maintenance ForConstructionPros. com/21064311

PHCo Lo-Density CLHR Inline Electric Fuel Oil Preheaters Lo-Density CLHR Inline Electric Fuel Oil Preheaters from Process Heating Company (PHCo) automatically provide precise temperature and viscosity control of heavy oils for efficient and steady delivery from the pump to the burner. • PHCo inline heaters are fully automatic, easy to control, and – due to their removable drywell tubes – easy to clean, which is especially important when using recycled fuel oil • Efficient electric heaters ultimately provide unique benefits for asphalt producers that include lower operating costs, improved product quality, reduced maintenance, significantly longer heater life and enhanced sustainability • The PHCo preheater is plumbed between the pump discharge and the burner ForConstructionPros. com/20979365

IN S

ADM Asphalt Plant Fuel Meter ADM’s digitized fuel meter linked to the control house provides an easier and safer way to measure fuel consumption than having a worker stand on top of the tank and use a stick and tape measure to read fuel levels • Accurate to a fraction of a gallon, it’s also more reliable and easier to read than a sight gauge • The benefit of being aware of an operation’s exact fuel consumption is quickly realizing whether the plant is consuming too much or too little fuel • Changes in fuel consumption can help determine if there is a problem at hand, such as needed burner maintenance, greater than normal aggregate moisture content and high pollution ForConstructionPros. com/21026260

A

IN S

IN

Do S pro can and fits •

IN •S

IN S

www.ForConstructionPros.com/Asphalt

7/20/20 1:33 PM


INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

PARTS CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

INSPECTION

ULTRA-PORTABLE

AND WE DO THIS... INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

INSPECTION SERVICES

CONTROLS

ASPHALT PLANTS SERVICES No other North American manufacturer ULTRA-PORTABLE INSPECTION CONTROLS offers more options than Astec. ASPHALT PLANTS SERVICES

CONTROLS

INSPECTION Downtime SERVICES is

ULTRA-PORTABLE costly. Keeping ASPHALT PLANTSyour

PARTSrunning in top shape plant protects your profits. That’s where Astec inspection services can really pay off. Schedule an inspection when it’s convenient and gain information you need to plan maintenance when it fits your schedule. It’s one more thing Astec can do for you.

• Silo Inspections

INSPECTION ULTRA-PORTABLE Drum Shell ASPHALT Inspections •SERVICES PLANTS

PARTS

• Full plant Inspections

INSPECTION SERVICES

ULTRA-PORTABLE

PARTS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

Double Barrel // DBX // DBXHR // UniDrum CONTROLS

ULTRA-PORTABLE INSPECTION 5 BURNER CONTROLS OPTIONS ASPHALT PLANTS SERVICES

Phantom // Talon II INSPECTION //SERVICES Fury CONTROLS WhisperCONTROLS Jet // Versa Jet INSPECTION CONTROLS

SERVICES INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS ULTRA-PORTABLE ASPHALT PLANTS ULTRA-PORTABLE ASPHALT PLANTS

2 BAGHOUSEINSPECTION OPTIONS ULTRA-PORTABLE CONTROLS Pulse Jet // ReverseSERVICES Pulse

ASPHALT PLANTS

INSPECTION SERVICES INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS ULTRA-PORTABLE ASPHALT PLANTS

CONTROLS

Long-term Silos // Short-Term Silos INSPECTION ULTRA-PORTABLE CONTROLS

ACON0820_18-32_PlantComp_J.indd 31

PARTS

ASPHALT PLANTS ULTRA-PORTABLE ASPHALT PLANTS

2 SILO OPTIONS

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

INSPECTION CONTROLS 4 DRUM OPTIONS SERVICES

CONTROLS

INSPECTION SERVICES

PARTS

PARTS PARTS PARTS PARTS

PARTS

PARTS PARTS

PARTS

SERVICES

ASPHALT PLANTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

PARTS

7/20/20 1:33 PM


quality control tarmac equipment undergoes rigorous inspections before leaving the factory. quality mix starts with quality equipment.

PRODUCTION PRODUCTS PLANT COMPONENTS

Sponsored By

CMI Portable Split-Level Control House The portable split-level control house incorporates an individual motor control center and operators control room on one chassis. • Control room is designed so that the operator has a higher vantage point to oversee plant operations with the added benefit of extra space underneath for storage • Both the motor control center and control room have their own independent climate control ForConstructionPros. com/21109875

ALmix Portable RAP System

www.tarmacinc.com

contact tarmac at 816-220-0700 or info@tarmacinc.com

The ALmix Portable RAP System is the solution for asphalt producers looking to utilize RAP in their mixes, with customizable options that help any producer meet a wide range of mix recycling goals. Engineered to take the day-in, day-out abuse associated with high-volume plant production while incorporating the features that allow the precision required for today’s high-spec mixes: • Each RAP bin feeder incorporates a direct connected helical gearbox and fully-digital flux vector technology allowing the flux vector drive to produce 100% torque at zero speed without overheating • Each RAP bin feeder is equipped with a material flow detector to alert the plant operator if material ceases to flow from any RAP bin • Each RAP bin feeder tail shaft is equipped with an optical encoder which allows automatic feeder control through the ALmix Insignia Control System • Rotary electric vibrators and air cannons to prevent material bridging come standard • RAP screens, crushers and over-belt magnets are available to process even the most difficult RAP • Each recycle bin is fitted with a grizzly constructed from ½ -in. x 6-in. flat bar to reject oversized materials and to provide a smooth surface for the loader bucket • A 36-in.-wide RAP collecting conveyor is provided under the RAP bins to transport material to the next phase in the process • Also available in skid-mounted and stationary designs ForConstructionPros.com/21123114

32

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_18-32_PlantComp_J.indd 32

www.ForConstructionPros.com/Asphalt

7/20/20 1:37 PM


PRODUCTION PRODUCTS PLANT TECHNOLGOY Astec, Inc. PMII-A Continuous Mix Blending Controls PMII controls and monitors proportional control of aggregate feeders and the blending of asphalt, recycle, shingles and additives. PMII is ideal for retrofit applications. The PMII replaces existing PM96 control systems or can be installed new when manual controls are desired • Programmable Logic Controller (PLC) helps reduce control system downtime • PMII helps you meet or exceed state automation requirements while allowing flexibility for customization • This flexibility also allows the control system to be easily and cost-effectively upgraded as needs change ForConstructionPros.com/20864792

Systems Equipment Total System Control (TSC)

Command Alkon APEX Asphalt Software

The Total System Control (TSC) is a plant control system to start, stop and monitor motors and manually load from silos. It is designed to be universally used in any plant, regardless of motors used and their function. • Completely configurable to match plant needs • Capable of using multiple displays in order to accommodate all required buttons for plant operation

APEX Asphalt software enables trucks to check-in, load and ticket without interruption as well as controlling all of your asphalt batch operations with ease. • Combined with a full range of tools for quoting, billing, reporting, performance analysis and transportation management, Apex Asphalt delivers a comprehensive solution for the asphalt supply chain.

ForConstructionPros. com/12129243

ForConstructionPros. com/21037135

PlantDemand Online Scheduling Tool • Streamline ordering process allows plant operators, sales people, the QC team, managers and engineers to store information in a centralized location • PlantDemand increases visibility by having a single true source of information which reduces the redundancy of order taking in multiple places • Visual order calendar helps users understand what plant must do in seconds on an intuitive order calendar with optimized order entry decisions ForConstructionPros.com/21041190

HaulHub Analytics With HaulHub Analytics, material hauling executives are now able to track and utilize performance data and monitor operations costs to optimize and improve their businesses. HaulHub Analytics metrics include driving, jobsite and plant cost breakdowns, jobsite costs per ton, costs relative to bid prices, fleet efficiency, fleet safety, and average plant and jobsite wait times, among other key data points. • HaulHub Analytics enables managers to view and utilize insights in real time to compare data on fleet, jobsite, plant, regional and national levels ForConstructionPros.com/21045959

www.ForConstructionPros.com/Asphalt

ACON0820_33-35_PlantTech_J.indd 33

Sponsored By

Astec Silobot Inspection Service The Silobot is a hi-tech tool that the Astec team will use to do thorough visual inspection and metal thickness testing inside hot mix storage silos. • The remote control capabilities of the Silobot inspection device keep workers out of the confined space of the silos and out of harm’s way. It does the job quicker, safer and typically more thoroughly • The inspection record provided to the customer will include a metal thickness map, a video and photos of the inside of each silo ForConstructionPros. com/12315408

Heatec RECON Monitor Heatec RECON is designed to keep operators informed about the status of asphalt storage tanks and hot oil heaters. • Web-based system that uses a smart phone, tablet computer or PC • Display screen shows real-time status of the hot oil heater that heats asphalt tanks as well as the status of asphalt stored in tanks • One version shows status of the plant heater and up to three tanks; another version shows status of two plant heaters and up to six tanks ForConstructionPros. com/12164473

MINDS, Inc. DrumTronic Asphalt Plant Automation & Controls • Dependable, accurate, reliable and customizable, the DrumTronic system is ideal for a simple bitumen and aggregates blending only application, or comprehensive total plant control • The software is engineered to bring the best industrial practices in all production phases ForConstructionPros. com/21117830

AUGUST 2020 ASPHALT CONTRACTOR

33 7/20/20 1:38 PM


PRODUCTION PRODUCTS Sponsored By

PLANT TECHNOLOGY MINDS Inc. LiveLoader App for Asphalt Plants

Libra Systems NextGen Silo Safety System The NextGen Silo Safety System guards against the most dangerous and expensive accident that can occur at an asphalt plant – inadvertently opening the wrong silo. Equipment damage, personal injury, litigation and lost production are all consequences of a silo accident. The NextGen3 Silo Safety System is designed to dramatically reduce these risks. • Significantly reduces the possibility of opening the wrong silo ForConstructionPros. com/21041587

WEM4000 Asphalt Remote Printing Control System Remote printing capabilities dramatically improve the speed and throughput of your operations, plus safety, by keeping drivers in their trucks and out of the control house. • Custom built remote printer enclosure is designed to house either a thermal or laser printer • When installed at cab height, the driver may pick up the scale ticket after weighing or loading without leaving the vehicle ForConstructionPros. com/21095640

LiveLoader provides the loader operator with a realtime dashboard of practical contextual information regarding plant production. • All vital production information and statistics are now available inside the cab, in plain sight, updated in real-time! • Current mix and percentages, next mix scheduled, feeders in use, amount of stone needed, levels and no-flow sensors, plus time-to-empty countdowns are displayed. Information is graphically displayed for intuitive understanding at a glance ForConstructionPros.com/21048333

Stansteel Tank Tracker

MINDS, Inc. PlantManager Dashboard

The Stansteel Tank Tracker has the ability to accurately measure and monitor the tank and silo levels in real time and at multiple remote locations. • Accurately measures liquids, solid materials and even bulk powders like mineral filler and can do so in cold or elevated temperatures • From your smart device, you will be able to manage all your silos and tanks on one screen

The PlantManager gives plant owners a 30,000 ft. bird’s eye view of your company's plants all in one powerful dashboard to help them spot issues at a glance and drill down into production and job data. • Multi-plant dashboard with all key numbers per location • Individual plant production details allow you to see real-time and historical of all production data ForConstructionPros. com/21117844

ForConstructionPros. com/21059879

ADM Tank Level Indicator A shutdown may result if the levels sink too low without the operator noticing and ordering material in time but the ADM tank level indicator gives operators the ability to see fuel or asphalt tank levels from the control house. • Offered in a variety of types, including pressure gauges and radar, the indicators allow plant operators to see the levels from the control room rather than walking out to the tanks • This is useful on busy days when the operator may not have time to visit the tanks

WEM Analytics

ForConstructionPros. com/21135693

34

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_33-35_PlantTech_J.indd 34

ULTR ASPH

A

ULTR ASPH

ULTR The ASPH

ForConstructionPros.com/21026261

WEM Analytics is a manager’s go-to tool to help identify the operational opportunities that have the greatest impact to production. • Web-based software that can be accessed by a desktop, laptop, tablet or smartphones’ web browser • Easy drag n’ drop interface lets you create additional dashboards for monitoring various functional areas of your plant, across any time span

ULTR ASPH

MINDS Inc. BatchTronic Full Batch Plant Automation Control With the number of screens ranging from one to four and a 'zero console' option, the BatchTronic fits all types of asphalt plants and budgets. • The system has the capacity to control all asphalt plant operations or just the tower • An industrial grade computer with security and redundancy features ensures reliable operation in all situations • The operator can actually link what is seen to the actual physical mechanisms ForConstructionPros.com/20864797

www.ForConstructionPros.com/Asphalt

7/20/20 1:38 PM

hig any and 50% are

ULTR ASPH


CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

n ULTRA-PORTABLE ASPHALT PLANTS

PARTS

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

AND WE DO THIS...

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

ULTRA-PORTABLE ASPHALT PLANTS

ut

ULTRA-PORTABLE Series The Astec Voyagerâ„¢PARTS ASPHALT PLANTS

asphalt mixing plants offer compact, highly-portable facilities designed to easily move to any jobsite, anywhere. Compact components are pre-wired to speed set-up and enhance portability. Options to produce mix with up to 50% RAP are available. In addition, the Voyager Series plants are backed by the best service support in the industry.

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

r le

A unique approach to asphalt mixing technology.

MOBILITY

The modular design enhances portability and reduces setup time

EASY PLANT ERECTION No cranes needed for set-up

RECYCLE

Can produce asphalt pavement mix with up to 30% recycle content

FLEXIBILITY

Easily adapts to the local site

ACON0820_33-35_PlantTech_J.indd 35

7/20/20 1:38 PM


PRODUCTION PRODUCTS Sponsored By

CRUSHERS Kleemann SPECTIVE Control System

SchutteBuffalo RC Series RAP Crusher The RC Series Industrial Crusher is ideal for processing a variety of large, heavy, bulky and/or abrasive materials that will break or reduce upon impact. • The large in-feed allows for easy processing of blocky materials • High tonnage rates are achieved with the lowest possible amount of wear and tear • Can reduce materials to desired output size in a single pass ForConstructionPros. com/10091844

Rock Systems RIPRAP Screening Plant Rock Systems Semi-Portable Single Separation Rip-Rap Plant consists of a heavy duty feed hopper constructed of 1-in. thick plate with stiffeners and a 46-in. wide x 20-ft. long vibrating grizzly feeder complete with 14-ft. solid pan impact section and 6-ft. long adjustable grizzly bar section. • Collecting hopper under the grizzly section constructed of ½-in. thick plate with stiffeners to bypass the fines to an optional side discharge conveyor • Semi-portable steel fabricated support structure ForConstructionPros. com/21011813

KPI-JCI Kodiak K350+ Crusher Johnson Crushers International Inc. has expanded its Kodiak Plus cone crusher series with the new K350+ which offers higher production with a smaller footprint. • In comparison to the K300+, the K350+ features increases in drive train, stroke, horsepower, weight, head diameter and hold-down force, resulting in an up to 10% capacity increase ForConstructionPros. com/21047704

36

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_36-39_Crushers_J.indd 36

The SPECTIVE crusher control concept from Kleemann is designed to offer simple operation. • With clear symbols, all plants functions are recognizable at a glance • Operator is guided intuitively through the control system • If a fault occurs during machine operation, a fault diagnosis is shown on the display; downtimes are reduced with fault localization, a description of the fault, and tips on its elimination • 12-in. touch panel is not susceptible to dust and is easy to read with the adjustable light and contrast settings, even in strong sunlight; responds to the touch of fingers, tools, pens, or gloves

O

ForConstructionPros.com/12315175

Ammann RSS 120-M Shredder, Iron Separator & Screener

KPI-JCI Astec Mobile Screens Fast Pack Aggregate Processing System

The Ammann threein-one RSS 120-M prepares recycled asphalt for use in an asphalt plant. The RSS 120-M functions as a shredder, iron spearator and screener and can recycle asphalt ranging in size from milling to larger pieces/slaps. • Protective processing maintains desired grain sizes • Track mounted

The Fast Pack system is an innovative, patented combination of crushing, screening and stockpiling equipment. • Self-erecting with the ability to turn moving days into production days with moving times as low as 12 hours • Can operate as a complete system or operate units separately • Offers 400- to 600-tph capacities

ForConstructionPros. com/20973199

F

ForConstructionPros. com/12314890

Eagle Crusher 1200-25 CC Crushing Plant The Eagle Crusher 1200-CC with Pre-Feeder Screen is designed for larger-sized jobs with high volumes of material at- or near-spec. • Two-deck screen-feed system greatly increases total production as the millings and fines go through the screen to stop wear and tear on the impactor and dramatically increase tonnage ForConstructionPros.com/21118085

Kleemann MOBICAT MC 120 Zi PRO Jaw Crusher With an output of up to 717 tons per hour, the MOBICAT MC 120 Zi PRO jaw crusher has a feed opening of 48-in. x 32-in. and is equipped with an extra long articulated crusher jaw. • To ensure the best possible material flow, the continuous feed system (CFS) adapts the conveying speed to the fill level of the crusher • Should material bridging occur in the jaw crusher, the crusher can be reversed with the aid of the electric crusher drive and in this way the blockage can be cleared in no time • All components and functions can be controlled conveniently from the ground ForConstructionPros.com/21122402

If th atte

FRO

www.ForConstructionPros.com/Asphalt

7/20/20 1:42 PM


EX R EA E R SE PIR GI LY CU ES ST BI RE TH RAT RD YO IS IO UR MO N SP NT OT H,

TO DA Y!

OCTOBER 22-23, 2020 • TALKING STICK RESORT, SCOTTSDALE, AZ

JOIN US FOR THE EXCLUSIVE, INTIMATE EVENT AT THE STATE-OF-THE-ART TALKING STICK RESORT. FEATURED SPEAKERS:

DAVE CRENSHAW

JIM CANFIELD

MATT BOOTH

AUTHOR AND CEO OF INVALUABLE INC.

PRESIDENT OF CEO TOOLS BY APRIO

ATTITUDE EXPERT, AUTHOR OF BE YOURSELF – IMPROVE YOURSELF

REGISTER NOW. If the event is cancelled, registered attendees will receive a full refund

IGNITECONSTRUCTIONSUMMIT.COM

FROM THE PRODUCERS OF:

ACON0820_36-39_Crushers_J.indd 37

7/20/20 1:42 PM


PRODUCTION PRODUCTS Sponsored By

CRUSHERS

Keestrack R3 Screening and Crushing Plant Keestrack's R3 plant is available as diesel-hydraulic or fully hybrid "e"-version. • Production rates up to 250 tph • Flexible processing of a large variety of raw and recycling materials • Pre-screening • High-performance impact crusher 48 ICR 100-00 with 770 x 960 mm inlet opening • Heavy-duty 920 mm rotor (44-in. diameter) ForConstructionPros. com/21107274

Superior Industries P500 Patriot Cone Crusher The P500 Patriot Cone Crusher is engineered to operate most effectively at 500hp with a head diameter of 59-in. maximum feed opening of 13.5-in. and closed side settings from 3/8 - 2-in. • Inverted or reverse design of tramp relief cylinders ensure the hydraulic seals are not exposed to contamination during operation ForConstructionPros. com/21111775

Cedarapids CRC320 Cone Crusher Plant The CRC320 Cone Crusher Plant features the TG320 300hp bushing cone crusher with an exceptionally large feed opening. • This economical portable plant runs smoothly with the optional patent pending “canted” jack system • Easily transported on the road or on-site, the all electric plant takes the TG Series cones portable to fit a variety of layouts and applications ForConstructionPros. com/21135418

38

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_36-39_Crushers_J.indd 38

Rotochopper FP-66 Horizontal Grinder The FP-66 horizontal grinder from Rotochopper has been updated to increase the capacity of materials that can be processed by the remarkably reliable mid-sized grinder. • The larger 30-in. feed opening and increased powerfeed lift height allow larger materials into the grinding chamber – increasing productivity and efficiency • Now available with a more aggressive powerfeed and either a 630 or 755 horsepower diesel engine to grind a variety of raw materials ForConstructionPros.com/21120420

Astec Mobile Screens Ranger Compact Track Line Astec Mobile Screens Ranger line of compact track equipment, will include a variety of jaw crushers, impact crushers, cone crushers, incline screens and trommels. • These compact units will serve a variety of new markets including building and construction, landscaping, quarry operations and plant and tool hire • The ease-of-use, ease-of-transport, versatility and flexibility of compact, trackmounted units make them ideal for smaller operations that require powerful equipment with a limited footprint ForConstructionPros.com/21105604

Superior Industries Tracked Conveyors

ALLU Demolition and Quarry Crushers

Superior Industries has added a 75-ft. tracked stacker and an 8- by 16-ft. tracked feed hopper to its portable conveying solutions. • The tracked stacker weighs 34,000 lb and each stacker can handle up to 1,000 tph • Hydraulic power controls the tracks, folds and discharge height while cross-bracing designed is built into the undercarriage of the stacker which ensures structural rigidity and stable track travel

The crusher series initially includes three crusher models for excavators in the 10to 33-ton range. • Reversible crushing reduces potential for jamming, blockages or obstruction with rebar while delivering greater levels of production • Feed plate design built into jaw ensures the feeding function in a fully loaded chamber delivers high rates of production with minimal risk of bridging ForConstructionPros. com/21121513

ForConstructionPros. com/21030219

A

Wh

You par of e ser

KPI-JCI FT4250CC Mobile Impactor

AS

Kolberg-Pioneer’s hybrid-powered FT4250CC mobile impactor plant features a two-deck, 4-ft. x 7-ft. pre-screen that minimizes the amount of undersized material that passes through the chamber, reducing wear costs and increasing the amount of final product by up to 30%. • Hybrid power option offers allows producers flexible power options in one convenient package ForConstructionPros.com/21121625

www.ForConstructionPros.com/Asphalt

7/20/20 1:42 PM


CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

PARTS

PARTS

PARTS CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

INSPECTION

ULTRA-PORTABLE

AND WE DO THIS... PARTS

ASTEC PARTS

CONTROLS

ASPHALT PLANTS SERVICES No other North American manufacturer ULTRA-PORTABLE INSPECTION CONTROLS offers more options than Astec. ASPHALT PLANTS SERVICES

CONTROLS

PARTSyou call, we answer. When

Your call links you to the world’s largest inventory of in-stock parts for asphalt plants. It links you to a seasoned team of experts, ready to help. It links you to world-renowned service, ready to deliver. It links you to Astec.

ASTEC PARTS: 800.251.6042

INSPECTION SERVICES

ULTRA-PORTABLE

PARTS

PARTS

INSPECTION CONTROLS 4 DRUM OPTIONS SERVICES

ASPHALT PLANTS ULTRA-PORTABLE ASPHALT PLANTS

PARTS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

Double Barrel // DBX // DBXHR // UniDrum CONTROLS

ULTRA-PORTABLE INSPECTION 5 BURNER CONTROLS OPTIONS ASPHALT PLANTS SERVICES

Phantom // Talon II INSPECTION //SERVICES Fury CONTROLS WhisperCONTROLS Jet // Versa Jet INSPECTION CONTROLS

SERVICES INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS ULTRA-PORTABLE ASPHALT PLANTS ULTRA-PORTABLE ASPHALT PLANTS

2 BAGHOUSEINSPECTION OPTIONS ULTRA-PORTABLE CONTROLS Pulse Jet // ReverseSERVICES Pulse

ASPHALT PLANTS

INSPECTION SERVICES INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS ULTRA-PORTABLE ASPHALT PLANTS

CONTROLS CONTROLS

2 SILO OPTIONS

Long-term Silos // Short-Term Silos INSPECTION ULTRA-PORTABLE CONTROLS

ACON0820_36-39_Crushers_J.indd 39

PARTS

PARTS PARTS PARTS PARTS

PARTS

PARTS PARTS

PARTS

SERVICES

ASPHALT PLANTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

CONTROLS

INSPECTION SERVICES

ULTRA-PORTABLE ASPHALT PLANTS

PARTS

7/20/20 1:42 PM


Paving Spotlight Sponsored by

Th fo ra •

VÖGELE SUPER 2000-3i Tracked Asphalt Paver

F

& A

Th

fo op m •

F c

Th bo au pa •

he VÖGELE SUPER 20003i Tracked Asphalt Paver is designed primarily for use in highway construction and large-scale commercial applications, which are all about power and productivity. With a powerful, 6-cylinder engine rated at 250 hp (186 kW) and high-output hydraulic drives, it is fully equipped to handle these demanding jobs. The SUPER 2000-3i also comes with the latest version of the VÖGELE operating system, the popular ErgoPlus 3, which has been enhanced with a number of new ergonomic and functional features.

T

40

With its new mounting system, the paver operator’s console can be shifted conveniently and easily between the right and left sides of the operator’s stand during operation. In addition, it now has a large color display that ensures good readability even in poor lighting conditions. The screed operating consoles have been completely redesigned, making operation of this new “Dash 3” machine even easier for the entire paving crew. With this Highway Class paver, VÖGELE also offers the right screed for every application. The SUPER 2000-3i

can be combined with the VF 600, the screed with front-mounted extensions, as well as the VR 600 and AB 600, two screeds with rear-mounted extensions. The AB 600 Extending Screed is equipped with both a vibration system and tamper, meaning it can achieve higher compaction. It is also ideal for placing recycled materials or RCC application. Elevate asphalt paving to a new level of performance with the VÖGELE Super 2000-3i Tracked Asphalt Paver.

ASPHALT CONTRACTOR AUGUST 2020 www.ForConstructionPros.com/Asphalt

ACON0820_40-52_Pavers_J.indd 40

7/20/20 2:06 PM

F

• •

F


JOBSITE PRODUCTS ASPHALT PAVERS

Sponsored By

LeeBoy Legend Electric Screed The electrically heated Legend Screed System is available for commercial class pavers in the 16,000-lb. and under range. • Available for the 8500 and 8515 models with an 8- to 15-ft. paving width, and on the 24,000-lb. 8816 model with an 8- to 15.5-ft. paving width • Features include bull-nose screed plates, angle of attack controls, front-mounted screed extensions and crown/invert control ForConstructionPros.com/10079337

Caterpillar Grade & Slope System for Asphalt Pavers This 2D system allows paver operators to place the exact amount of mix on the surface for better compaction performance, optimal material usage and improved mat quality. • Can be equipped with single or dual LCD displays with text-based menus offering multiple language options ForConstructionPros. com/10983751

Vögele Dash 3 Paver Super 2100-3i Paver The Super 2100-3i paver in the new ”Dash 3“ generation from Vögele is equipped with an AB 600 extending screed in the TP2 Plus version for high compaction. • EcoPlus low-emissions package combines a number of individual measures distinctly reducing the fuel consumption and noise of the paver • PaveDock Assistant facilitates communication ForConstructionPros. com/11328712

BOMAG CR652RX Remix Paver The Cedarapids CR652RX utilizes a 260-hp Cummins Tier 4 Final turbocharged diesel engine to power the Remix Anti-Segregation System augers, paver functions and electric screed, as well as lights for night paving. • 16.7-ton standard receiving hopper capacity can be expanded to 27 tons with the available hopper insert • Available with the Fastach 10 or Stretch 20 diesel or electric screeds for mainline paving widths of up to 30 ft. at depths up to 12 in. • Frame Raise System raises and lowers the rear of the paver to allow the operator to fine-tune the head of material at the spreading augers ForConstructionPros.com/10250906

Carlson EZV10 Highway Class Screed Carlson's EZV10 front-mount highway class screed has the ability of paving as both a fixed width and hydraulic extendable platform. • Robust extension support system enables rigidity and eliminates flexing of the extensions at all widths • Able to build out to 30 feet with high-strength heated bolt-ons • Heavy-duty ½-in. 450 rated Brinell screed plates, tightly fitted adjustable strike-offs and state-of-the-art heating elements • Available for most tractors built by the major paver manufacturers

Volvo P7110B and P7170B Tier 4 Final Pavers The P7110B tracked and P7170B wheeled pavers offer 360° visibility, improved fuel efficiency with 12+ hours of continuous runtime without refueling and options to enhance productivity and mat quality. • Volvo D8J, 8-liter, Tier 4 Final engine uses continuous passive regeneration and boasts a more than 5% improvement in fuel efficiency • Press of a button extends the twostage, 42-in. hydraulic tunnels, allowing head of material control without bolt-on extensions • Range of screed options and a foursensor material flow system • Choice of two control consoles for operation from the left or right sides ForConstructionPros. com/12185798

Dynapac F800W Asphalt Paver The Dynapac F800W wheeled paver offers a paving capacity of up to 1,000 tph and 8- to 19-ft. paving widths. • Carlson EZIV08-15 vibratory front extension screed • 34-kW, hydraulically driven, oversized generator heats the full width of the screed at all times • Smart controls automatically lock screed, halting leveling, feed and vibration when the paver comes to a stop • Dual, swing-out operator platforms • Two-speed hydraulic motor and heavy-duty torque hub provide ample tractive force for paving and enable transport speeds up to 11 mph • 173-hp Cummins QSB 6.7 Tier 4 Final engine ForConstructionPros. com/12214773

ForConstructionPros.com/12087940

www.ForConstructionPros.com/Asphalt

ACON0820_40-52_Pavers_J.indd 41

AUGUST 2020 ASPHALT CONTRACTOR

41 7/20/20 2:07 PM


AND YOU KNOW WE DO THIS... You know Astec for durable, reliable equipment with proven performance. A pioneering team with decades of experience and a culture committed to putting the customer first has culminated in a range of options, including drum styles, baghouse styles, and silo styles, which allow you to configure the precise plant for your needs. Astec offers a complete line of portable, relocatable and stationary asphalt plants from 80tph to 600tph.

ACON0820_40-52_Pavers_J.indd 42

7/20/20 2:07 PM


ENGINEERING

CONSTRUCTION

SERVICE & TRAINING

ENGINEERING

CONSTRUCTION

SERVICE & TRAINING

PARTS

ENGINEERING

CONSTRUCTION

SERVICE & TRAINING

PARTS

ENGINEERING

CONSTRUCTION

SERVICE & TRAINING

PARTS

ENGINEERING

CONSTRUCTION

SERVICE & TRAINING

PARTS

ENGINEERING

CONSTRUCTION

SERVICE & TRAINING

PARTS

ENGINEERING

CONSTRUCTION

SERVICE & TRAINING

PARTS

ENGINEERING

CONSTRUCTION

SERVICE & TRAINING

PARTS

ENGINEERING ENGINEERING

CONSTRUCTION CONSTRUCTION

SERVICE & SERVICE & TRAINING TRAINING

PARTS PARTS

ENGINEERING ENGINEERING

CONSTRUCTION CONSTRUCTION

SERVICE & SERVICE & TRAINING TRAINING

PARTS PARTS

SERVICE & SERVICE & TRAINING TRAINING

PARTS PARTS

PARTS

No other NorthENGINEERING AmericanCONSTRUCTION manufacturer offers more options than Astec. SERVICE & TRAINING

PARTS

5 BURNER OPTIONS

4 DRUM OPTIONS

Double Barrel // DBX // DBXHR // UniDrum ENGINEERING ENGINEERING

CONSTRUCTION CONSTRUCTION

SERVICE & SERVICE & TRAINING TRAINING

PARTS PARTS

2 SILO OPTIONS

2 BAGHOUSE OPTIONS

Long-term Silos // Short -Term Silos SERVICE & ENGINEERING CONSTRUCTION

Pulse Jet // Reverse Pulse ENGINEERING ENGINEERING

ENGINEERING ENGINEERING

Phantom // Talon II CONSTRUCTION // Fury ENGINEERING ENGINEERING CONSTRUCTION Whisper Jet // Versa Jet

CONSTRUCTION CONSTRUCTION

SERVICE & SERVICE & TRAINING TRAINING

PARTS PARTS

CONSTRUCTION CONSTRUCTION

SERVICE & SERVICE & TRAINING TRAINING

PARTS PARTS

TRAINING

ENGINEERING

ACON0820_40-52_Pavers_J.indd 43

CONSTRUCTION

SERVICE & TRAINING

PARTS

PARTS

7/20/20 2:07 PM


JOBSITE PRODUCTS ASPHALT PAVERS

Sponsored By

Carlson CP130 Commercial Paver Combining highway-class build, productivity and mat quality in a commercial-class paver, the CP130 gives contractors a leading platform for municipal and large commercial applications. • 130-hp Cummins QSF3.8 Tier 4 Final engine • One-piece forward tilting hood, large side doors and access panel in the hopper for service and accessibility to engine compartment • Class-exclusive armrest controls, swing out operator stations and 3-man configuration provide leading ergonomics and visibility ForConstructionPros.com/12305561

LeeBoy 8520 Asphalt Paver The 8520 asphalt paver has continuous rubber tracks and a 9-ton hopper capacity. • 106-hp Kubota Tier 4 Final engine • Enhanced hydraulic system optimizes system performance • Paving width from 8 to 15 ft. • Legend 815 heavy-duty electric screed ForConstructionPros.com/12313458

Moisture Sensors for Asphalt

Vögele Super 1800-3i SprayJet The Super 1800-3i SprayJet paver from Vögele is designed for the placement of thin bonded overlays. • ErgoPlus 3 includes important spraying functions integrated into the menu of the large color display on the paver operator's console • With the spray module removed, unit may be used as a conventional asphalt paver • Maximum spray width of 19 ft. 7 in.; as a conventional paver without spray function, it can pave widths of up to 29 ft. 6 in. ForConstructionPros.com/12228900

Roadtec SP-100e Paver The redesigned SP-100e gravity-fed asphalt paver eliminates a number of material-handling conveyor components and requires less engine power, saving fuel. • Base paving width of 10 ft. • Hopper capacity of 11 tons • Accepts the material at the top of the machine, where it is fed downward to the auger and screed • Combination of a gravity fed system with a material transfer vehicle helps remedy physical and thermal segregation in the mix • 173-hp Cummins QSB6.7 Tier 4i engine • Solid rubber wheels ForConstructionPros.com/11368585

Hydro-Probe

for Aggregate Bins and Conveyors

Remote calibration and configuration

The AP1055F high-production, rubber track paver provides a 25-ft. maximum paving width using the SE60-Series or XW-Series screeds. • 225-hp Tier 4 Final engine with Eco-mode and automatic engine speed control • 70-kW integrated generator • Dual operator stations • Mobil-Trac undercarriage • Cat Grade Control

Temperature stable

ForConstructionPros.com/12315167

With 35 years experience and over 75,000 units sold, you can be sure that our digital moisture sensors will give you accurate results and reliability that is unbeatable.

• • • • • •

Caterpillar AP1055F Asphalt Paver

Accurate, consistent, real time moisture measurement Digital technology with precise linear output Easy to integrate into new or existing systems

Local Service & Support

Tel: +1 231 439 5000 enquiries@hydronix.com

www.hydronix.com 44

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_40-52_Pavers_J.indd 44

www.ForConstructionPros.com/Asphalt

7/20/20 2:07 PM


GETS THE JOB DONE JUST LIKE YOU With Evotherm®, you can hit your density numbers and get the job done. With bonus pay. Learn more:

EVOTHERM.COM

ACON0820_40-52_Pavers_J.indd 45

7/20/20 2:07 PM


JOBSITE PRODUCTS ASPHALT PAVERS

Sponsored By

Roadtec RP-170e Paver

Carlson CP85 Commercial Paver The CP85 features a high-torque, 74-hp CAT 3.4B Tier 4 Final engine that requires no DEF, a heavy-duty chassis, highway-class wear components and leading operator controls. • Wear components including stronger chains and slats, fully replaceable Hardox floor plates, 12-in. replaceable auger flights and fully sealed highway-class auger bearings • Dual control consoles pivot down 30° and outwards 40° and control stations can be adjusted to the comfort and visibility needs of the operator • 8- to 15-ft. EZC815 electrically heated screed includes a 2% screed taper, fulllength element hold downs for efficient heat transfer, adjustable slide track system and spring-loaded endgates ForConstructionPros.com/20987451

Mauldin 1350-C Commercial Asphalt Paver

This application for smartphones and the web allows paving contractors to track the location and productivity of haul trucks as they travel between the asphalt plant and jobsite. • Paving contractors can open up the app and quickly see where their trucks are and when they will arrive to a jobsite • Provides location tracking by placing devices at the plant and equipment that create a geofence

The 1350-C Commercial Paver has a small footprint and low clearance that makes it suited for applications ranging from road shoulder to utility trenches to small paths. • Standard working width of 4 to 8 ft. • 2,000-lb. screed comes with thermostatically controlled electric heat

ForConstructionPros. com/21003439

ForConstructionPros. com/21004129

Carlson CP60 and CP65 Wheeled Asphalt Pavers The CP60 and CP65 wheeled asphalt pavers are suited for use on motorized and non-motorized pathways, urban streets, country lanes, etc. • Available DEUTZ high-torque, Tier 4 engine • Deliver laydown rates of up to 250 tph • Optimal maneuverability with transport speeds of up to 16 kph • EZC34 electrically heated screed offers a standard pave width of 1.8 to 3.4 m and provides optimal ride uniformity, mat quality and pre-compaction ForConstructionPros.com/21047851

Superior Tire & Rubber APS Hopper Flashing The patent pending APS Hopper Flashing keeps the asphalt in the hopper far better than the OE flashing due to its higher heat resistance and superior shape-retention ability. • Reduces or eliminates asphalt spillage onto rollers, saving time and labor • Stands up to constant abuse from asphalt trucks and keeps asphalt from spilling onto the ground, reducing clean-up and avoiding fines

46

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_40-52_Pavers_J.indd 46

D

H =

ForConstructionPros. com/12287505

Caterpillar Inc. eRoutes App for Asphalt Paving

ForConstructionPros.com/21047732

The 174-hp RP-170e rubber-tire 8-ft. highway class paver features a 6-ft. 4-in. wheelbase designed to offer greater maneuverability without sacrificing traction or pushing power. • 10-ft. 5-in. hopper width with a 11.5ton capacity • Anti-segregation design with 16-in.-diameter augers that can be hydraulically raised, lowered or tilted

Weiler P265 Asphalt Paver The Weiler P265 commercial paver provides heavy-duty components in a compact paver. • Mechanical controls provide simple and reliable operation while cableoperated ground drive controls allow operation from either side of the machine • 3,000-lb. screed features a paving range of 7 ft. 8 in. to 14 ft. 4 in. with electric heat ForConstructionPros. com/21018774

LeeBoy 8530 Asphalt Paver A turbocharged 125 hp engine, enhanced cooling systems, independent hopper wings, reversible augers and conveyors, hydraulic tow point cylinders, material cut-offs that automatically close in reverse and quick change auger assemblies are just part of versatility designed within the new LeeBoy 8530 Asphalt Paver. • Weighing 4,150 lbs, the Legend HD PRO Screed standard features include heavy-duty flight screws ForConstructionPros. com/21115855

www.ForConstructionPros.com/Asphalt

7/22/20 9:11 AM


Oscillation is good. Dynapac made it best. Hardox Tough Drum + 2-Hour replacement belt installation = Highest Productivity in the Industry Dynapac backed 7 year warranty on Hardox oscillatory drums

Easy access to change timing belt Timing belt High efficient eccentrics High wear resistant Hardox drum shell

Eccentric housing with oilbath

dynapac.us | 800-651-0033 Follow Dynapac North America

Your Partner on the Road Ahead

ACON0820_40-52_Pavers_J.indd 47

7/20/20 2:07 PM


JOBSITE PRODUCTS ASPHALT PAVERS

Sponsored By

Carlson CP75 II Commercial Paver

Topcon Pavelink App The Pavelink cloud-based logistics application is designed to facilitate connected workflow between the asphalt plants, delivery trucks, company office and paving site. • Seamlessly integrates with existing planning and management tools, automatically gathering and centralizing relevant information such as quantities, temperatures, number of trucks loaded, current truck locations, jobsite arrival estimations, number of trucks returning or queuing for more loads, current screed width, current paver speed, and amount of roadway that has been laid ForConstructionPros.com/21063374

Caterpillar F-Series Pavers

Salsco TP 44 Track Paver

The AP500F and AP600F havewheeled undercarriages while the AP555F, AP655F and AP1055F come with the Mobil-Trac undercarriage. • SE-Series screed platform available with vibratory only or vibratory and tamper bars • Some models offer screed packages with the capability of paving up to 33 ft. wide • ACERT Tier 4 Final engine includes standard Eco-mode and automatic engine speed control • Refined heat distribution of screeds

The TP44 Track Paver is suited for paving sidewalks, cart paths, hiking and biking trails, trench work and any areas that are 2 to 6 ft. wide. • Hydraulic tilt hopper easily bolts together, allowing for the complete raising of the hopper for easy maintenance • Hydraulic endgates move in and out, and have rulers on the top of the end-gate to see where they are • All controls located on the rear of the machine including the key switch and throttle

ForConstructionPros. com/21037730

ForConstructionPros. com/21061078

Roadtec RP-250 10-ft. Asphalt Paver The RP-250 heavy-duty 10-ft. paver has large tires and an adjustable frame that provide optimal weight distribution and tractive effort. The unit has a 252-cu.-ft. hopper with a 10-ft. 3-in. width and is capable of paving speeds up to 233 fpm and travel speeds up to 13 mph. • 241-hp Cummins QSB 6.7 six-cylinder Tier 4 Final diesel engine and Sauer Danfoss Series 90 hydraulic pumps for propel and material feed ForConstructionPros.com/21088120

Dynapac SD Asphalt Paver Range with “THE” High Compaction Screed The SD2500CS paver will include the latest operator-assist technology systems such as Truck Assist, Light Assist, Width Assist and Screed Assist systems. Newly designed electric roof assist and electric rock deflector provide optimal operator comfort • SD2500CS paver will be paired with V5100THE tamper, high compaction electric screed and will be displayed with extensions attached to pave 27-ft. • Dynapac’s “THE” high compaction screed technology allows for a flexibility of adjusting pressure and vibration parameters for optimal results ForConstructionPros.com/21120779

48

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_40-52_Pavers_J.indd 48

The CP75 II asphalt paver provides higher material transfer with its 36-in.wide independent conveyors, while ergonomic controls and low visibility provide an operator-focused platform for residential and commercial paving applications • Electrically heated EZC815 screed features a standard paving width of 8 to 15 ft., coupled with highway class features for leading mat quality in a commercial package ForConstructionPros. com/21041395

BOMAG Cedarapids CR 1030 Asphalt Pavers The 260-hp CR 1030 W wheeled paver has a standard 16.7-ton hopper capacity or 27-ton capacity with insert. 225-hp CR 1030 T Series track model has a standard 14-ton hopper capacity or 22 tons with insert. • Stretch 20 hydraulically extendible screed enables infinitely variable paving widths from 10 to 20 ft. ForConstructionPros. com/21076258

Trimble Roadworks 2D Paving Control Platform Trimble Roadworks 2D Paving Control Platform is an automatic screed control system that can improve the accuracy and productivity in applications of asphalt paving. • Intuitive, easy-to-learn software built on the Android operating system can use a multitude of 2D references to pave with a fixed thickness

En

From for c wind are e

Weil

ForConstructionPros. com/21132376

www.ForConstructionPros.com/Asphalt

7/22/20 9:16 AM

ww


Engineered Innovation. From innovative designs to Caterpillar dealer service and support, Weiler is paving the way to success for contractors across North America. Weiler’s material transfer vehicles, commercial pavers, road wideners, windrow elevators, static split-drum compactors, soil stabilizers, rock drills, tack distributors and front mount screeds are engineered with innovative features to increase productivity while reducing operating costs. Weiler equipment is sold and serviced exclusively at Caterpillar dealers throughout North America.

www.weilerproducts.com

ACON0820_40-52_Pavers_J.indd 49

7/20/20 2:07 PM


JOBSITE PRODUCTS ASPHALT PAVERS

Sponsored By

Roadtec RP-195e Asphalt Paver Vögele ErgoPlus 3 Operating App This specially developed mobile app and the associated web special enables you to adopt the ErgoPlus 3 operating concept quickly and easily with the aid of numerous animations. • Enables paver operators to know precisely when to use specific operating functions and which automatic functions will make work simpler and faster • Step-by-step videos demonstrate entire work steps such as setting up the screed or requirements such as varying pave widths, as well as comprehensive automatic functions • Accessible at any time on a PC, tablet or smartphone ForConstructionPros. com/21040136

LeeBoy 8520B Asphalt Paver The 8520B incorporates enhanced features including an above deck generator, increased fuel capacity, and front adjustable conveyor chains that eliminate the need to lift conveyors to fine tune tension. • LeeBoy’s ultra-efficient material management system with wide slow-moving conveyor system moves material consistently from the truck to the screed • 106 hp (79.0 kw) Kubota Tier 4 Final Engine • Paving widths: 8-ft. to 15-ft. • Front access conveyor adjustments • Quick change auger assemblies • Legend heavy-duty electric screed • Enhanced hydraulic system optimizes system performance for ultimate production • Enhanced poly pad track design • 32 gallon fuel capacity ForConstructionPros. com/21108636

50

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_40-52_Pavers_J.indd 50

Roadtec's powerful, rubber-track highway class RP-195e paver is now powered by 230-hp Cummins QSB 6.7 Tier 4 Final-compliant diesel engine. • Anti-segregation design encompasses the feed tunnel, feed tunnel discharge and rear augers • Fully oscillating bogies and smooth tread aide in laying a smoother mat • Operator stations hydraulically swing out, allowing the operator to see down the side of the machine • Consoles - one of which contains the single joystick control - are located at the operator’s fingertips and the operator’s seat is adjustable for optimal comfort • Clearview FXS fume extraction system pushes fumes out away from the operator and keeps the line of sight clear to the front of the tractor and back to the augers • Guardian remote telematics and diagnostics system allows the user to wirelessly address any issues that may happen while the machine is at work ForConstructionPros.com/12055680

EAS

Carlson EZR208 Rear-mount Screed

Vögele Introduces Witos to Paving Applications

The 7,800-lb. EZR208 highway-class screed features a standard paving width of 8 ft. to 15 ft. 6 in. • 20-in.-deep single-piece screed plates paired with state-ofthe-art heating elements • Extension support system includes a high-strength tubular frame and firmly fixed chrome rods for optimal strength even at 22 ft. with bolt-ons • Low-profile extensions provide better line of sight to augers and material • Standard vibration absorption pads located at each operator station

• At the end of a day's paving, job-site reports are sent automatically by e-mail to selected recipients • The app and the paver are networked via WLAN, so information can be exchanged between the machine and the foreman’s smartphone even where there is no mobile phone connection ForConstructionPros. com/21064547

ForConstructionPros. com/20987452

Volvo P5110B and P5170B Asphalt Pavers The P5110B tracked and P5170B wheeled 8-ft. asphalt pavers are powered by the Volvo D6 Tier 4 Final engine, with engine speed, torque and fuel consumption optimized for performance and fuel efficiency. • Large-capacity hopper ensures continuous paving and durable rolled wings help prevent material buildup and cut cleaning time • UltiMat160 screed features extensions that can adjust paving width hydraulically from 8 to 16 ft. • Optional bolt-on extensions enable paving up to 18 ft. • Three-phase AC power screed heating system creates fast screed heat-up times with a lower amperage requirement ForConstructionPros.com/21108632

www.ForConstructionPros.com/Asphalt

7/20/20 2:07 PM


125HP HEAVY COMMERCIAL PAVER

TRUST LEEBOY. AS DEPENDABLE AS YOUR DAY IS LONG.

EASY ACCESS FOR ROUTINE MAINTENANCE

NEW LEGEND HD PRO SCREED

PIVOTING, MULTI-POSITION SEATS

www.LeeBoy.com

ACON0820_40-52_Pavers_J.indd 51

7/20/20 2:07 PM


JOBSITE PRODUCTS ASPHALT PAVERS

Sponsored By

BOMAG CR 820 Asphalt Paver

Topcon Thermal Mapping System for Asphalt Paving The Thermal Mapper for asphalt paving is designed to monitor temperature segregation and easily provide accurate compliance reporting, all with real-time kinematic (RTK) positioning accuracy. • Provides a visualization to operators in real time of whether the mix falls within a pre-defined temperature range • Quickly tells operators if mix is stable or if moderate or severe temperature variation is occurring • Creates data reporting files to download for applications such as DOT compliance via an interactive Pavelink module ForConstructionPros.com/21121074

Weiler P395 Commercial Asphalt Paver Engineered and built to exceed the demands of commercial paving, the Weiler P395 incorporates proven designs with new innovations to provide performance, reliability and outstanding mat quality in a wide range of applications. • 4,400-lb., 7-ft. 8-in. front mount screed is hydraulically extendable to 15-ft. 4-in. • 96-in. track length with 74-in. of ground contact and 140 mm track chain pitch provides smooth ride and excellent flotation • Automatic track tensioning ForConstructionPros. com/21119006

Carlson Paving EZ C34 High-Compaction Tamper Bar Screed Featuring a standard pave width of 5 ft., 10 in. – 11 ft., 2 in., the EZC34 TV screed represents Carlson’s first tamper bar platform and entrance into the global 1.8m market. A single tamper bar configuration, the EZC34 TV electrically heated screed howcases many of Carlson’s screed features for mat quality and reliability. • Exclusive extension support system with high strength aluminum extrusion • Adjustable slide block bushings with the most contact in its class for consistent mat quality and maintaining level longer

Leica MC1 for Stringless Paving

52

ForConstructionPros. com/21094678

Dynapac F80W Ride-On Mini Wheeled Paver The F80W ride-on mini wheeled paver is suited for patchwork, trench paving, bicycle paths and more. • Simplicity in design of controls makes it easy for the operator to learn and operate • Features a propane gas-heated screed that can be hydraulically extended to allow paving widths from 31 to 51 in. ForConstructionPros. com/21120863

ForConstructionPros. com/21121726

The MC1 asphalt paving solution enables operators to precisely place cement-treated base course or start asphalt paving directly without waiting for manual stakeouts. The operator can change the height offset directly on the run screen, and thanks to the automatic leapfrogging, paving surface quality is increased. The solution is fully compatible with Leica iCON site and Leica ConX for seamless data sharing, file transfer, as-built documentation, track, view and sync functions. • MC1 software has now been released for the entire iCON road segment, including soil compactors, concrete pavers, asphalt pavers and milling machines • Uncluttered and user-friendly interface with the latest updates included • Support of the Leica MSS400 sensors • Terrain models for milling and asphalt pavers • Smartspare TPS, a new feature for the handling of spare TPS tracking and lock to target ForConstructionPros.com/21120984

The BOMAG CR 820 Series of 8-ft. pavers feature a new operator’s platform, new controls and improved visibility. • Delivering all the power, versatility and heavy-duty design as previous paver models, a 160-hp diesel engine meets stringent Tier 4 Final emissions standards and offers ample reserve to efficiently power all paver functions plus push fully loaded trucks up steep grades • 10-ton hopper capacity offers more time between truck exchanges when paving

Caterpillar Thermal Mapping for Caterpillar Asphalt Pavers Thermal Mapping monitors the surface temperatures of the asphalt utilizing an infrared camera and a Global Navigation Satellite System (GNSS) enabled by RTK accuracy helping asphalt contractors achieve higher quality results and earn more incentive pay by exceeding quality targets. ForConstructionPros. com/21121909

ASPHALT CONTRACTOR AUGUST 2020 www.ForConstructionPros.com/Asphalt

ACON0820_40-52_Pavers_J.indd 52

7/20/20 2:07 PM


JOBSITE PRODUCTS PAVING ROLLERS MultiFit Compaction Optimizer I The intuitive Compaction Optimizer I display utilizes LED lights to indicate the progress of the compaction project. • At the beginning of the project, only a few lights might illuminate but as the project progresses and higher levels of compaction are achieved, more LED lights are lit indicating the increase in material stiffness • LED dial from 0 to 100 is intended to be used as a reference between areas on the job being compacted ForConstructionPros. com/20864448

CASE PT240D Pneumatic Roller The Tier 4 Final PT240D pneumatic roller has an operating weight of 21,380 lbs. and the ability to ballast up to 52,910 lbs. • Tire configuration (four in front and four in back) features a 2-in. overlap and a total compaction width of 78 in. • Kneads hot-mix asphalt gently at the surface as it rolls for greater asphalt density and fewer voids in the finished product ForConstructionPros. com/21113079

Volvo Density Direct Intelligent Compaction System The Volvo Intelligent Compaction (IC) system for select Volvo asphalt compactors is available in two packages — Volvo IC and Volvo IC with Density Direct. • Offers pass mapping, temperature mapping and data storage features; Volvo IC with Density Direct includes real-time density mapping technology • Produces a density calculation that is accurate to within 1.5 percent of core sampling ForConstructionPros. com/12058450

www.ForConstructionPros.com/Asphalt

ACON0820_53-57_PavingRollers_J.indd 53

Sponsored By

Willow Designs Notch Wedge Pneumatic Roller Willow Designs Notch Wedge Pneumatic Solid Wheel Roller is designed to achieve compaction of the "wedge" part of the notch wedge joint. • The Willow Designs Notch Wedge Pneumatic Roller is designed to work with our Notch Wedge Systems only. A simple update allows your current systems to work with the Notch Wedge Pneumatic Roller • Designed to be pulled from either side of the paver, with a fully adjustable pull point to accommodate front or rear extend screeds ForConstructionPros.com/21075919

Sakai America GW754 Vibratory Pneumatic Roller The Sakai GW754 vibratory pneumatic tire roller is widely versatile for various types of materials from HMA to soil. • Vibrating tires massage materials dynamically and compact them more uniformly which helps to cut operating cost on job site by the versatility and high compactive efforts • Tier 4 final Kubota V3800 turbo charged engine, rated at 110 hp and equipped passive regeneration ForConstructionPros. com/21109564

Caterpillar CB13, CB15 and CB16 Tandem Vibratory Rollers The CB13, CB15 and CB16 fit in the 13-, 15- and 16-ton weight classes and are powered by a 142-hp C4.4 engine with standard Eco-mode and automatic speed control. • Vibratory options include oscillatory vibration, dual amplitude, dual frequency, Versa Vibe and five amplitude systems • 360° seat positioning option enables operator to face direction of travel ForConstructionPros. com/20989782

Volvo DD110C Asphalt Compactor The 24,350-lb. DD110C is powered by a 148-hp Volvo D4 Tier 4 Final engine and features an eight-amplitude drum with a 66-in. width and a high-frequency system that delivers 3,800 vpm. • Intuitive onboard display includes an Impact Spacing Meter that allows the operator to control speed and maintain the correct impact spacing for consistent smoothness • Available with Compact Assist with Density Direct and the ActiveCare Direct machine monitoring and utilization reporting service ForConstructionPros.com/20988012

BOMAG BW 28 RH PneumaticTired Roller The BOMAG BW 28 RH pneumatic-tired roller features a large 106 cubic foot ballast compartment and efficient weight ballast changing system to boost wheel loads and improve compaction performance. • Designed for various applications from city streets and county roads to interstate highways and airports • Operating weights from 18,960 to 61,730 lbs. • Maximum wheel load of 7,715 lbs. for deep static compaction • 80.4-in. compaction width ForConstructionPros.com/12312003

AUGUST 2020 ASPHALT CONTRACTOR

53 7/20/20 2:10 PM


ACON0820_53-57_PavingRollers_J.indd 54

7/20/20 2:10 PM


ACON0820_53-57_PavingRollers_J.indd 55

7/20/20 2:10 PM


JOBSITE PRODUCTS Sponsored By

PAVING ROLLERS

Caterpillar CW16 Pneumatic Compactor The CW16 is designed for efficient performance on highways, city streets, county roads, lane additions, industrial sites, overlays, or other mid-size jobs. • Designed for use on granular materials and all types of asphaltmix designs, the Cat CW16 pneumatic roller is available as a standard nine-wheel model with a 69-in. compaction width or as an optional 11-wheel model with an 84-in. compaction width • Depending on ballast used (including water, sand, steel, or combinations), operating weight of the CW16 varies from an 11,464-lb. base configuration to an approximate maximum weight of 33,000-lb. for the nine-wheel configuration and 32,850-lb. for the 11-wheel configuration. Operating weight can be adjusted to suit job requirements ForConstructionPros. com/21009845

Volvo CR30B and CR35B Combination Rollers The CR30B and CR35B combination rollers include a high-frequency front drum and four pneumatic rear tires. • Feature 47.2- and 52-in. drum widths, 4,100 and 4,140 vpm and 7,460 and 8,050 lbs. of centrifugal force • Auto-vibration feature automatically engages vibration when machine reaches 1.5 mph and disengages when speed drops below 1.2 mph • 49.6-hp Kubota Tier 4 Final engines with optional auto-idle feature • Pressurized, 79-gal. water spraying system and separate emulsion tank • Include a side console and display, laterally sliding operator seat and sloped engine hood ForConstructionPros. com/20995716

BOMAG BW 120 SLC-5 Combination Roller

A

The BOMAG BW 120 SLC-5 combination roller features a steel front vibratory drum joined with four smooth rear rubber tires to elevate compaction results on a wide range of applications. • Powered by the 24.8-hp Kubota diesel engine, the BW 120 SLC-5 meets stringent Tier 4 Final emissions standards without a diesel particulate filter, simplifying maintenance • 47.2-in-wide front steel drum plus 4,320-vpm vibration frequency and amplitude of 0.020 in. deliver high compaction performance at the jobsite • Ergonomic control panel layout with clear symbols and one switch/one function operation delivers intuitive roller control ForConstructionPros.com/21121868

Dynapac CO4200 Generation VI Double-drum Roller

Sakai Americas SW994ND Vibratory Roller

The CO4200 Generation VI roller features an oscillation force of up to 27,450 lbs. with an oscillation frequency of 2,400 vpm. • Delivers up to 28,780 lbs. of centrifugal force and 3,060 vpm in high amplitude mode and 18,880 lbs. of centrifugal force and 4,020 vpm in low amplitude mode

The SW9994ND is an oscillatory/ vibratory tandem roller. • Dual drum oscillation and vibration • Versatility by switching on the fly from vibe for high compaction efforts to OSC for smooth finish of the pavement surface • Optimized dual drum OSC achieves target density of thin lift pavement (1-1.5in.) in fewer passes and increases paving train speed

ForConstructionPros. com/21021876

ForConstructionPros. com/21109565

Road Widener Offset Vibratory Roller Attachment The Offset Vibe Roller Skid Steer Attachment offers interchangeable rollers in 2-, 3- and 4-ft. widths and includes an offset feature that allows the carrier and operator to stay on the road while rolling and compacting shoulders and ditches. • Can roll outside the shoulder’s slope (up to 30° drum pivot) and be dropped down into trenches with the drum positioned 30 in. below the mounting point • Produces 500 to 2,500 vpm with an amplitude of .02 in. Remote control

F c

T ro vi h fo co •

• •

ForConstructionPros.com/20988103

HAMM HP Series Pneumatic Rollers The HP 180 and HP 180i pneumatic tire rollers offer operating weights of 8t to a maximum of 18t and the HP 280 and HP 280i feature operating weights between 10t and a maximum of 28t. • Feature a modern, spacious operator's platform or panoramic cabin with maximum visibility • Operating weight quickly adjustable to suit the asphalt type, layer thickness and application with flexible ballasting • User guidance assisted by the unambiguous color-coded grouping

ASPHALT CONTRACTOR AUGUST 2020 www.ForConstructionPros.com/Asphalt

ACON0820_53-57_PavingRollers_J.indd 56

D V

ForConstructionPros.com/21064550

56

Po Fi ro co Im •

7/20/20 2:10 PM

F c


y

Volvo DD128C Asphalt Compactor Powered by a 148 hp Volvo D4 Tier 4 Final engine, the DD128C delivers fast rolling speeds while maintaining proper compaction spacing with Volvo CE’s Impact Spacing Meter. • 79-in. wide drum with chamfer and radii drum edges, and a 55-in. diameter rear drum and auto-reversing eccentrics. Both drums have industry-leading, automatic drum wetting systems • The DD128C has the widest range of amplitudes (0.08-0.8mm or 0.0030.03in.) on the market • Work mode engine operating speed is 1,850 rpm providing high torque and power with minimal noise and fuel consumption • A host of safety and servicing solutions come as standard, such as Compact Assist, Volvo’s unique Intelligent Compaction System ForConstructionPros. com/21118954

Case DV36D, DV45D and DV45CD Vibratory Rollers The DV36D and DV45D double-drum rollers and the DV45CD combination vibratory roller are designed with high curb clearance and no overhangs for small- to mid-size compaction applications. • Drums can be offset to further improve accessibility and performance in turns • 43.5-hp Tier 4 Final engine • 8,290- to 10,340-lb. operating weights, selectable dual frequencies (2,700/3,420 vpm) and automatic or manual vibration engagement • ISO-mounted operator platform with standard lateral-sliding seat • Standard 50-gal. water tank with pressurized water system • Compatible with the Case ACE Force Intelligent compaction system ForConstructionPros. com/21061353

www.ForConstructionPros.com/Asphalt

ACON0820_53-57_PavingRollers_J.indd 57

BOMAG Alternative Fuel Options for BW 120 Tandem Rollers Three different solutions for the BW 120 tandem vibratory roller are now available: traditional diesel, electric and liquid petroleum gas (LPG). • The traditional diesel-powered BW 120 AD-5 roller features a 33-hp Kubota engine with diesel particulate filter (DPF) that meets stringent Tier 4 Final emissions standards • For indoor, tunnel, inner city and construction projects that require meeting higher environmental standards, the BOMAG BW 120 AD-5 offers two alternative drive model concepts: the electric drive BW 120 AD-5 E and gas BW 120 AD-5 LPG • Offering a fast, 5-minute tank exchange, the liquid petroleum gas BOMAG BW 120 AD-5 LPG alternative drive is perfect for inner-city applications and construction projects with extremely tight environmental standards ForConstructionPros.com/21118970

BOMAG Bomap Compaction Assistant Bomap from BOMAG is the solution for the digital earthworks and asphalt construction site; it can be used to document work results on site in real time. • The app can be installed on standard Android tablets and smartphones and documents passes via GPS for every roller, regardless of make • The result can be exported as a PDF and shows the customer the compaction performance achieved ForConstructionPros. com/21064597

CASE E Series Compact Vibratory Rollers The E Series line of compact vibratory rollers combines a compact size, excellent maneuverability and visibility with many of the same features found in larger compaction machines. • Ideal for small- to mid-size compaction applications ForConstructionPros. com/21120047

Dynapac CO5200 VI Oscillation Roller The CO5200 Generation VI double-drum roller with oscillation allows the operator to select the system that is most suitable for the application. • 25,798 lbs oscillation roller • Drum shell fabricated from Hardox 450 abrasion-resistant steel • Cummins QSF3.8 IV/T4f engine • Balanced operating mass for the front and rear modules helps reduce roller marks and deliver a consistently compacted surface with every pass • Can reach ground speeds of up to 7.5 mph ForConstructionPros.com/21120765

HAMM WITOS HCQ Software HCQ Navigator uses a panel PC in the roller cabin to provide a live indication to roller drivers of the points that were already sufficiently compacted or where further compaction is necessary. This prevents over- and under-compaction while helping to optimize the number of passes. • HAMM is allowing more sustainable compaction in asphalt construction and earth work since supervisors can stay informed about the detailed construction progress at all times with WITOS HCQ – without ever traveling to the site ForConstructionPros.com/21122245

AUGUST 2020 ASPHALT CONTRACTOR

57 7/20/20 2:10 PM


JOBSITE PRODUCTS MTV’S

Sponsored By

BOMAG Cedarapids CR662RM RoadMix MTV/Paver The Cedarapids CR662RM RoadMix MTV/Paver is designed as both a material transfer vehicle and paver. • When equipped as an MTV, the 30-in.-wide conveyor offers a discharge height of 73.2 to 115.8 in for non-contact paving and swivels 55° left or right of center for offset paving • For mainline paving, the unit can be equipped with a Stretch 20 or Fastach 10 screed capable of paving widths up to 30 ft. ForConstructionPros. com/12226868

Weiler E2850A Remixing Transfer Vehicle The Weiler E2850A Remixing Transfer Vehicle combines innovative features with proven components to increase productivity while reducing costs. • 25 tons of onboard storage, triple pitch remix augers and 600 tph discharge capacity provide non-stop, non-contact paving with reducing particulate and thermal segregation ForConstructionPros. com/21018785

Roadtec MTV-1105e The rubber track MTV1105e transfers asphalt material from a truck to a paver for non-contact paving. • With tracks made for any environment, you never have to worry about the jobsite base. If the ground is solid enough for paving, the MTV-1105e smoothly and effortlessly carries material anywhere you nee • Operator station gives exceptional visibility from the dump hopper ForConstructionPros. com/21102576

58

Vögele MT 3000-2i Material Transfer Vehicle The MT 3000-2i material transfer vehicle from Vögele offers optimal performance in a new-design. • The unit weighs 56,000 lbs. and has an 18-ton storage capacity, making it heavy enough to get the job done but portable enough to haul with minimal hassles • Its low profile gives it a low center of gravity, and it can move 1,300 tph • Active remixing is achieved by two 16-in.-diameter conical augers in the receiving hopper • Auto feed function automatically slows or shuts down feeding when the hopper insert is filled ForConstructionPros.com/12113037

Dynapac MF2500CS Material Transfer Vehicle

Weiler E1650 Remixing Transfer Vehicle

The MF2500CS and MF2500CS with SwingApp boast a capacity of up to 4,000 tph and are able to handle a variety of material applications, including asphalt, concrete, sand and base material. • Conveyor belt system can empty a standard 35-ton truckload in as little as 35 seconds • The SwingApp functionality can transform the unit to an offset feeder by swinging the conveyor belt up to 55° in either direction

The E1650 combines 15 tons of onboard storage, triple pitch remix augers and a 600-tph discharge capacity to enable non-stop, non-contact paving with reduced particulate and thermal segregation. • Variable-speed elevator and conveyors allow chain speed to match production • 8-ft. 6-in. width from outside of tire to outside of tire

ForConstructionPros. com/20995073

ForConstructionPros. com/20996779

Roadtec SB-3000 Material Transfer Vehicle The SB-3000 is an all new Shuttle Buggy MTV features 25 tons of storage in the main hopper and can hold more than 30 tons of material to help crews maintain nonstop paving and remixing for the best possible mat. • New operator stations are focused on safety and comfort. The main operator is closer to the action while maintaining excellent sight lines and the ground operator is protected inside the structure of the machine • Cummins, QSB6.7, Stage 5 engine ForConstructionPros.com/21108856

Weiler E2850B Remixing Transfer Vehicle The E2850B Remixing Transfer Vehicle features 25 tons of onboard storage, triplepitch remix augers and 600-tph discharge capacity for non-stop, non-contact paving with reduced particulate and thermal segregation. • Variable-speed elevator and conveyors allow chain speed to match production, minimizing wear and material segregation • Auto dump and dump assist features optimize truck exchanges for continuous paving • Rear steer option provides an inside turning radius of 14 ft. with crab and coordinating steering and auto center ForConstructionPros.com/21047850

ASPHALT CONTRACTOR AUGUST 2020 www.ForConstructionPros.com/Asphalt

ACON0820_58-59_PavingMTVs_J.indd 58

7/20/20 2:13 PM


er

rd

Don’t miss the perfect opportunity to check out the latest products and make valuable connections through fun events and networking opportunities at National Pavement Expo. NPE 2021 will be hosting 50+ sessions, 26 of which are new, all with a mix of new speakers making their debut and top veteran speakers returning to this event specifically tailored to the pavement maintenance industry.

REGISTER NOW nationalpavementexpo.com Stay connected!

@pavementexpo

CONFERENCE: JANUARY 20-23, 2021 I EXPO: JANUARY 20-22, 2021 MUSIC CITY CENTER I NASHVILLE, TN

ACON0820_58-59_PavingMTVs_J.indd 59

7/20/20 2:13 PM


JOBSITE PRODUCTS Sponsored By

PAVING SUPPORT Willow Designs Safety Edge

Powermoon LED Light Towers These portable, glare-free lighting systems feature LED lights with approximately 20,000 hours of life. • LED Eco provides 400 watts for 40,000 lumens and the LED Master has 700 watts for 70,000 lumens • Open and close via a steel frame mechanism that uses an umbrella style rather than inflating • Operates using batteries and 12- or 24-volt alternators • Can be mounted to construction equipment ForConstructionPros. com/10772815

iCone Flagging Baton The ITS Flagging Baton posts a GPS location and flagger activity to XML feeds for access by transportation devices and major navigation services. • Sensor placed inside flagging pole detects and sends flagger location, helping keep them safe from traveling public ForConstructionPros. com/21021853

Lincoln Paving 660AXL Windrow Elevator The 660AXL Windrow Elevator increases production and improves material handling. • Remixing auger system provides a continuous flow of material reblending asphalt before entering the hopper - eliminating segregation and ensuring a uniform mix temperature • Tier 4 Final engine 195-hp Cummins QSB6.7 • 80 gal. Fuel Tank – 55 gal. Hydraulic Oil Reservoir • 60-in. wide – high capacity slat conveyor • Safety control panels ground level on both sides of machine ForConstructionPros. com/20966969

60

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_60-61_PavingSupport_J.indd 60

The Safety Edge System offers a narrower screed in order to accomplish the 30° standard wedge. • Gives power to the slope function that creates the angle of the safety edge • Plugs into the on-board generator • Offered in standard or vibratory units • Use the same mounts as the Notch-Wedge Systems so no extra modifications to the paver are required

F

Th Lo re le jo •

ForConstructionPros.com/11234316

• •

Etnyre Maintenance Asphalt Distributors

Ray-Tech Fusion Joint Heaters

Optimize your speed and accuracy of single application and resealing liquid asphalt applications with Etnyre’s Maintenance Distributors. • The unit features Etnyre’s exclusive circulation control system for fast and reliable application on any project

The Ray-Tech Fusion Joint heaters are available in manual tow and automatic tow options and are ideal for any size paving job from parking lots to airports and highways to keep joints hot during paving. • Featuring a 15-in. x 12-in. stainless steel heating chamber

F c

ForConstructionPros. com/20992903

ForConstructionPros. com/20866364

Carlson LED Blade Light Carlson's LED Blade Light has the ability to mount on a wide range of equipment including rollers, pavers, milling machines and more. • An all-in-one lighting platform able to be powered by 110/220v AC and 12/24v DC for a greater range of versatility • Produces equivalent light output of a 2,000-watt halogen while offering a lifespan of 50,000 hours • Low profile and directional light creates safe working environments by eliminating dangerous glare while illuminating positions and mobile equipment • Cool-to-touch LED’s enable quick breakdown and storage in durable, hard-sided case ForConstructionPros.com/12041607

Illumagear Halo Light 360 The ILLUMAGEAR Halo is 360º Personal Lighting that attaches to any hard hat and enables the wearer to see and be seen. • Visible over ¼ mile away in all directions and fully illuminates the task area • Attaches to any hard hat • Cord-free, with an onboard battery • Four light modes: Halo, HI-Alert, Task and Dim • International Protection(IP) Rating of 67 to protect against dust, dirt and water • Rechargeable battery lasts an average of 15 hours ForConstructionPros.com/21005870

www.ForConstructionPros.com/Asphalt

7/20/20 2:14 PM

A

W sp D eq in w m •

• • • • •

F c


LeeBoy 3000C Force Feed Loader The 3000C Force Feed Loader is ideal for removal of snow, leaves or dirt making it the perfect jobsite companion. • 130 hp Cummins Tier 4 Final Diesel Engine with Two-Speed Hydrostatic Transmission • Choice of tapered or multipurpose moldboard • 30-in. Wide variable speed, reversible, cleated conveyor belt • Fully enclosed, lockable cab with clear visibility of the front feeder and rear conveyor ForConstructionPros. com/21027390

Rosco Max 3 Asphalt Distributor With a larger fully circulating extending spray bar, the Rosco Maximizer 3B Distributor is a highly versatile piece of equipment designed with the end user in mind and has the ability to cover a wide area in an extremely efficient manner. • With the aid of a large color monitor, operators can monitor vitals, oversee the variable width and rate control or engage the enviro-flush clean out system among others • 8-ft. to 16-ft. fully circulating extending spraybar • 400 gallons per minute Viking Asphalt Pump • Straight-line start and stop • Accurate application regardless of spraybar width or speed • 12 presets for application rate with GPS speed and distance monitoring ForConstructionPros. com/21039905

www.ForConstructionPros.com/Asphalt

ACON0820_60-61_PavingSupport_J.indd 61

Road Dryer Truck-mounted RD-1200XT The RD-1200XT pavement-drying unit quickly dries asphalt and concrete pavement, allowing crews to pave or apply surface treatments or striping after just one pass. • Blows heated air up to 300° F directly downward through multiple nozzles, eliminating the risk of flying objects • Preconditions the incoming air to remove moisture prior to heating and directing the heated air to the road • Available as a simple to operate trailer- or truck-mounted unit • Can be adjusted for 8- to 12-ft. drying widths ForConstructionPros.com/21032471

Sun Chem Black Off Tar & Asphalt Remover

LeeBoy 4130 Road Widener

Clean tar, asphalt and bitumen asphalt off all types of equipment with Black Off Asphalt Remover. • Plant based and bio-degradable • Won’t damage lighting fixtures • Will not swell rubber (but do not leave on rubber parts an extended amount of time)

The 4130 Road Widener has a shiftable conveyor and foldable hopper wings that allow precise placement of material to either side of the machine. • Operator console easily shifts from side to side and allows a clear view into the front hopper and material flow to the strike-off • Tilting front hopper improves trailer load angle to 14.5°

ForConstructionPros. com/21079659

ForConstructionPros. com/21041593

Bergkamp Pivot Tack System The Pivot Tack/Air Hose System for the FP5 Flameless All-InOne Pothole Patcher features a pivoting arm that holds the tack hose off of the ground and parallel to the hopper, locked in place for transporting with a spring-loaded pin. • Locks into position when in use, allowing the operator to keep the hose suspended and off of the ground • Eliminates a trip hazard ForConstructionPros.com/21068401

Thunder Creek Gen-3 Multi-Tank Trailer The updated Multi-Tank Trailer (MTT) fuel and service platform now allows users to legally haul up to 920 gal. of diesel without a CDL or HAZMAT endorsement (Title 49 (CFR49). • Electric manifold automatically shuts off tank valves after fueling • Redesigned front end enables customization and quality improvements such as an improved door hinge design and stronger DEF container shelf • Re-engineered tank design for increased strength and durability, thicker gauge steel on doors and heavy-duty latches ForConstructionPros.com/21046681

AUGUST 2020 ASPHALT CONTRACTOR

61 7/20/20 2:14 PM


JOBSITE PRODUCTS Sponsored By

QUALITY CONTROL

ACE Auto-Grade Portable Quality Control Laboratory The ACE Auto-Grade Laboratory is a fully self-contained gradation lab designed to automate AASHTO T11 & T27 ASTM C117 & C136 aggregate testing. • Fully portable, measuring 24-in. deep by 3-in. wide • Testing deck can range from 37 to 44-in. • Sieve sizes range from 25mm to 7.5μ, up to 15 different sizes ForConstructionPros. com/20996519

ATS Asphalt Testing Solutions Asphalt Testing Solutions & Engineering partners with contractors to assist in multiple areas before, during and after production and placement of asphalt mixtures. Quality Control & Quality Assurance ForConstructionPros. com/21062066

InstroTek AutoXtract Automatic Extraction System The AutoXtract is an innovative device that automates the processes associated with asphalt extraction and recovery. • Designed for the determination of asphalt content in mixtures as well as characterization of reclaimed asphalt pavement (RAP) properties Closed-loop system eliminates the need for fume hoods and keeps harmful vapors away from operators ForConstructionPros. com/21138202

62

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_62-63_Paving QualityControl_J.indd 62

InstroTek 3500 Xplorer Nuclear Density Gauge InstroTek Model 3500 Xplorer is a highly advanced but very intuitive moisture density gauge with straightforward and uncomplicated operation. • Menu options are easy to read and navigate • A backlit LCD screen and special scroll functions allow operators to easily read the Xplorer’s two-line display during day or nighttime work • The simple keypad layout and program design will permit technicians to quickly move from other moisture density gauges to the Xplorer 3500 • Battery Saver and InteliCharge extend battery life keeping the gauge on the job instead of on the charger • This unit has been thoroughly tested for ruggedness and accuracy ForConstructionPros.com/21010109

Asphalt Analyzer Laboratory Test Machine

PAVELAB50 Automatic Closed-System Asphalt Analyzer

The InfraTest Asphalt Analyzer provides an automated and enclosed method of performing solvent extractions to verify asphalt content on bituminous mixture and rubber-modified bituminous mixtures, which has been recently approved under ASTM D8159. • InfraTest’s new ground tire rubber model, Rubber Analyzer, is equipped with a second solvent circuit allowing for the extraction of rubber particles in modified asphalt mixtures

The PAVELAB50 Automatic Closed-System Asphalt Analyzer is designed to separate bitumen, filler and aggregates from asphalt mixtures by closed-system solvent extraction. • Fully compliant with the new ASTM D8159-2018 and EN 12697-1 • Safe, quick, environmentally friendly and accurate with high repeatability ForConstructionPros. com/21069785

ForConstructionPros. com/21026156

GSSI PaveScan 2.0 Asphalt Density Assessment Tool PaveScan 2.0 incorporates a new sensor design built specifically for the extremes of the asphalt paving environment, foldable deployment arms with high-visibility for work site safety and has a warm-up time of under one minute when ambient temperature is over 70° F. • PaveScan RDM is ideal for uncovering problems that occur during the paving process, including poor uniformity and significant variations in density ForConstructionPros.com/21119999

TransTech Systems PQI 380 NonNuclear Pavement Quality Indicator TransTech Systems flagship product, the PQI 380 non-nuclear asphalt density gauge provides precise pavement density measurement almost instantly (3 seconds) without the hassle of nuclear regulatory training and certification. • Full color VGA display • LED backlight for easy visibility in light or dark situations • Customizable project and mix entries • Data management screen with the ability view, print or download data via USB ForConstructionPros.com/10146917

www.ForConstructionPros.com/Asphalt

7/20/20 2:18 PM


ACON0820_62-63_Paving QualityControl_J.indd 63

7/20/20 2:18 PM


Preservation Spotlight Sponsored by

an • • • •

Wirtgen’s Large Milling Machines

F

C

T m h a b e o b •

• •

NEW LEVEL OF LEADERSHIP he new W 220 Fi and W 250 Fi large milling machines serve a wide range of applications at a maximum milling depth of 14 in. – from surface course rehabilitation and fine milling work to complete removal of the surface. Various drive concepts are available to ensure maximum, optimal milling performance. For example, the W 220 Fi is equipped with a two-speed Dual Shift powershift transmission, while the W 250 Fi has an Active Dual Power dual engine drive. With an engine power of 801 HP (W 220 Fi) and 1,010 HP (W 250 Fi) respectively, the two flagship models are exceptionally powerful. The W 220 Fi and W 250 Fi are also setting new standards in terms of milling performance and machine efficiency. In

T

64

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_64-67_PreservationMilling_J.indd 64

the automatic mode, the Mill Assist standard assistance system provides the optimal balance between performance and operating costs. This not only improves milling performance, but also reduces diesel, water and pick consumption, as well as CO2 emissions. The machine operator can also preselect a working strategy from “Costoptimized”, “Performance-optimized”, or “Milling texture quality.” For example, it is possible to define the required milling texture quality on a scale of 1 (coarse) to 10 (very fine) in advance at the touch of a button. Mill Assist also automatically controls the two-speed Dual Shift powershift transmission. Together with the diesel engine, the intelligent control of the two-speed powershift transmission extends both the upper and lower range of possible milling drum speeds. At lower speeds, fuel and

pick wear can be significantly reduced. At higher speeds, high milling pattern quality is ensured even in the case of high area performances. With the Active Dual Power dual engine drive of the W 250 Fi, depending on the project situation and the pre-selected working strategy, Mill Assist then automatically controls just one or both motors. In addition, the engines operate efficiently at optimally adapted speeds. This significantly reduces costs for diesel and cutting tools. Take your milling operations to the next level with these machines designed for high milling performance.

• •

F c

F

Th ra in an • • • •

F

www.ForConstructionPros.com/Asphalt

7/20/20 2:20 PM


At lea

non ed os. ly ing

to e ng

PRESERVATION PRODUCTS MILLING MACHINES

Sponsored By

Roadtec RX-505 Cold Planer The Roadtec RX-505e/ex is a light weight, maneuverable machine provides a high performance solution to a wide range of milling applications. Innovative safety features and enhanced operator controls provide a new level of comfort for the operator. • 610 horsepower half-lane cold planer • Capable of cutting 79-in. or 86-in. wide and up to 13-in. deep • Comfortable operator seats are height adjustable and easily stowed if desired • Rear object detection is designed to stop the mill if a person or object is detected behind the machine while it is in reverse and includes additional sensors and ground level buttons allowing crew members to disable reverse ForConstructionPros.com/21047786

Wirtgen W 380 CRi Cold Recycler The 116,845-lb. W 380 CRi granulates material and transforms it into a homogeneous material mixture by adding binding agents such as cement, bitumen emulsion or foamed bitumen. • Available working widths of 10 ft. 6 in., 11 ft. 6 in. and 12 ft. 6 in., and mills the road up to 1.2 in. deep • Mixing capacity of up to 800 tph • Swivel-mounted and heightadjustable discharge conveyor at the rear can feed large quantities of material to a paver • 1,038-hp Tier 4 Final diesel engine • Automated features such as the high-precision LEVEL PRO leveling system enhance ease of operation ForConstructionPros. com/21064544

BOMAG BM 2500/75 Milling Machine Big on production, the BM 2500/75 is a flexible half-lane mill that offers a range of standard, fine, micro and power drum designs to meet a variety of milling needs and is powered by a 771-hp diesel engine with efficient mechanical drum drive for the 98.4-in wide cutter to deliver cutting depths reaching 13.8 in. • The unit features three milling speeds – ECO (100 rpm); Universal (112 rpm); and Speed (131 rpm) – providing the optimum balance between productivity and efficiency with reduced fuel consumption and wear • Inner 35.4 -in. conveyor quickly channels material from the cutting drum to reduce wear and increase productivity ForConstructionPros. com/21121851

Wirtgen W 220 Fi and W 250 Fi Large Milling Machines The 801-hp W 220 Fi and 1,010-hp W 250 Fi serve a range of applications at a maximum milling depth of 14 in., making them suited for surface course rehabilitation and fine milling work. • Various drive concepts are available to ensure maximum, optimal milling performance • In automatic mode, Mill Assist standard assistance system automatically controls the two-speed Dual Shift powershift transmission • In combination with the diesel engine, the milling drum speeds can be increased or decreased to match the application • Wirtgen Performance Tracker (WPT) calculates the precise surface milling performance, milling volume and consumption values for the machine. ForConstructionPros.com/21108870

www.ForConstructionPros.com/Asphalt

ACON0820_64-67_PreservationMilling_J.indd 65

Caterpillar K System Milling Drum After years of research, Caterpillar Inc. has unveiled the K System standard milling drums with advanced features for surface removal or complete removal of road surfaces. • Dual retention system feature with taper and cylinderical lock. No need for torqueing bolts • Highly featured tool holder with anti-rotating design to ensure proper holder positioning • System designed as left or right sided pieces to allow for optimized cutting effort and material flow delivering an excellent cutting pattern • Available in multiple space sizing with the same holder system ForConstructionPros. com/21047786

Wirtgen W 240 CR / W 240 CRi Cold Recycler The helical design of the Wirtgen W 240 CRi milling and mixing rotor transports the mix to the center and then to the paving unit via the primary conveyor. The spreading auger distributes it evenly in front of the variable paving screed, which ensures that the mix is paved true to line and level. • The heavy-duty milling and mixing unit is ideally suited for both the down-cut process (recycling) and up-cut process (milling) • The extremely hard-wearing HT22 quick-change toolholder system increases productivity. In addition, the Multiple Cutting System MCS EXTEND for different working widths maximizes machine utilization • State-of-the-art injection systems with adjustable injection pressure, innovative process water monitoring for the different injection systems, and an automatic self-cleaning and flushing feature can be relied on to produce high-quality base layers ForConstructionPros. com/21122219

AUGUST 2020 ASPHALT CONTRACTOR

65 7/20/20 2:20 PM


PRESERVATION PRODUCTS Sponsored By

MILLING MACHINES

Caterpillar PM825 Cold Planer The PM820, PM822 and PM825 have operating weights from 79,630 to 82,650 lb. and cutting widths from 79 to 98.6 in. • Three electronically controlled cutting settings to match rotor speed/torque with operating conditions • 755-hp Cat C18 ACERT Tier 4 Final engines iso-mounted to reduce vibration • Hydrostatic drive with two variable-displacement propel pumps supplying a variable-displacement motor at each track • Automatic traction control system minimizes track slip in extreme conditions ForConstructionPros.com/20980992

Roadtec Auto Cut Precision Milling Technology

Wirtgen W 150 CFi Compact Milling Machine

Auto Cut allows milling machine operators to easily raise the mill, walk over obstacles, walk back into the cut and resume milling at the same depth, without reprogramming or delay. • Easy to use, intuitive interface can be learned in minutes • Additional HMI switches mounted to the top of the ACE display box • Heavy-duty smart cylinders with independent sensors on each leg provide precise depth measurements

The 46,000-lb. W 150 CFi compact milling machine equipped with the optional 1,800-mm milling drum (1,500 mm standard) can take on surface course rehabilitation for medium to large jobsites to a maximum milling depth of 330 mm. • Center-mounted milling drum has a 980-mm diameter (with tools) and is designed to create optimal weight distribution • Powered by a 380-hp Cummins QSL9 diesel engine

ForConstructionPros. com/20990543

ForConstructionPros. com/21040111

CMI RM-6 Roto-Mill Cold Planer The modular design RM-6 Roto-Mill features a 75-in. cutting width at up to a 13-in. depth. • Cummins QSX 15 Tier 4 Final engine • Touchscreen control system • Large access doors for inspection, adjustment and repairs. • High conveyor capacity means less tooth wear and better productivity • Onboard diagnostics and manuals provide ease of maintenance and reduced downtime ForConstructionPros.com/20991198

Caterpillar PM300 Series Cold Planers The PM300 Series features three drums sizes, wheel or track undercarriage and a swinging right leg to accommodate medium-sized milling projects and true flush cutting on the right side. • 325 hp C9 ACERT engine matched with an optimized cooling system to power the rotor drive • 39.4- (PM310), 48.2- (PM312) and 51.2-in. (PM313) rotor and chamber • Cutting chamber and rotor positioned at the back for the machine to enable positioning a cut tight to obstacles • Proportional controls on steering, propel and conveyor joysticks

BOMAG BMS 15 Milling Tooth The BOMAG BMS 15 milling tooth design extends service live by 30% and reduces change-out time by up to 75% over conventional systems. • Base tooth holder features a maintenance-free, bolt-on design that does not require retightening, reducing service time • Low-resistance profile and tapered tooth retainer delivers more aggressive cutting with less wear to increase service life by up to 30% over other cutting systems • Calibrated positioning feet serve as the core of the BMS 15’s quick and accurate repositioning of the welded lower holder • Tapered tooth retaining claw boasts a low-resistance profile design to reduce wear • Special hardening process delivers long tooth and retaining claw life ForConstructionPros. com/20987446

• • •

Roadtec RX-405 Cold Planer The RX-405 is designed to cut variable widths of 2 to 5 ft. and cuts up to 13-in. deep. It is perfectly balanced for smooth elevation changes while cutting. • Center mounted, belt driven cutter drum provides a high level of productivity with exceptional balance • Intuitive controls and full time camera displays allow a single operator to run the machine from the seated or standing position • Variable Cutter System (VCS) makes quick work of drum changes. Since the drum is center mounted and belt driven, crews change drums quickly and safely • Drum Index Device rotates the drum independent of the cutter belt drive. This ability to rotate the drum while the drive belt is disengaged allows for safe cutter drum access and maintenance ForConstructionPros. com/21121078

ForConstructionPros.com/20986630

66

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_64-67_PreservationMilling_J.indd 66

• • • •

www.ForConstructionPros.com/Asphalt

7/20/20 2:20 PM

• • • • • • • •

3 H V O o C In S s

C 3 s P m R D Q D R


PLANT PRODUCTS

your total pavement solution • • • • • • • • • •

• • • • • • •

3-in-1 Machine for Grinding, Grooving, & Rumbling Hydrostatic Speed Control Various PCD cutter teeth configurations available Offloading options such as scissor lift high dump or offloading auger Cutting speeds from 2-4 MPH In-cab PLC for cutting pattern adjustment on the fly Snow-plowable markers, saw cutting for inlaid tape, sinusoidal rumbles, PA rumbles, banana cuts and more

• • • • • • • • • • • • • • • •

Melts up to 8000 pounds per hour per kettle Uses only 500° oil rather than 2000° open flame No burnt or charred material. Conveyor loading at waist level Truck is 7 feet shorter than competitive vehicles Proven Hog pump versus Moyno or experimental pump. Truck weighs 5000 pounds less empty Hog speed control versus expensive high maintenance hydrostatic speed One burner versus nine burners Extremely quick start-up/shutdown speeds

Grinder head supports full round, double round, and full flat PCD teeth Hydrostatic Speed Control 0-8.5 MPH Master/Follower function for grinding head to maintain exact lane widths Powerful vacuum recovery system that collects dust well within OSHA guidelines Computer-Controlled Profiling (CCP) for grinding, grooving, sinusoidal rumble strips & reflector cuts 6 cubic yard debris tank is 3x competitor’s Operator seat above heads a simple add-on Remote control with access to all head functions

Combination grinder and water blasting head. 3 Functions in 1: Water blast only, grind only, or both simultaneously PLC-controlled grinding/cutting depth that is accurate to 5 mil. Remove pavement markings faster, using less water Dual 3” vaccum for effective debris recovery Quick-connect hydraulic lines Downforce Control for consistent removal Remove thick markings at lightning speed including rib line

water blasting nozzles grinding teeth

www.thehog.com ACON0820_64-67_PreservationMilling_J.indd 67

7/21/20 9:10 AM


PRESERVATION PRODUCTS Sponsored By

PRESERVATION EQUIPMENT Rayner PavementSaver III

BOMAG RS 500 Recycler/Stablizer The 55,556-lb. RS 500 Recycler/ Stablizer features a 510-hp Mercedes Benz OM 471 LA engine and an offsetting rotor design with the capability of sideshifting to either side of the machine. • 88.5-in. rotor width, 197-in. maximum cutting depth and a recycling speed of up to 164 fpm • FLEXMIX technology includes three infinitely variable gradation bars that can be adjusted to achieve the target material size setting with uniform results • Standard quick-change BRS05 tooth holder for fast cutting tooth replacement • ROPS/FOPS operator’s cab offers comfortable, climate-controlled operation and is centrally positioned for all-around visibility ForConstructionPros. com/12293017

Roadtec SX-8e/ ex Soil StabilizerReclaimer The 82,000-lb. SX-8e/ex is capable of cutting up to 20 in. deep and 100 in. wide and is designed for road rehabilitation, cold recycling, or soil stabilization. • Rotor designed for milling and mixing the most resistant soils completely and homogeneously • Variable geometry cutter housing enables the unit to achieve material gradation with each pass • 755-hp Caterpillar C18 Tier 4i (SX8e) or 700-hp Caterpillar C18 Tier 3 (SX-8ex) engine • Air-shift four-speed transmission • Includes joystick controls and four different steering modes ForConstructionPros. com/20973546

68

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_68-71_PreservationEquip_J.indd 68

The new features of the PavementSaver III include a Control Area Network and an Autonomous Rate Control System. • Control Area Network (CAN) components make up the majority of the PavementSaver III’s control system, which benefits everyone – the owner, operator and mechanic • The Autonomous Rate Control (ARC) system is a computer-controlled and pressuremanaged spray system that applies sealcoating at any desired application rate an operator selects • ARC offers single-step calibration, precise application rates and a speed management system while also eliminating the guesswork on application rates ForConstructionPros.com/12301959

Rosco CSV Variable-Width Chip Spreader

Wirtgen WR Series Wheeled Cold Recyclers

The CSV does not require a permit to transport so the unit can be transported legally at all hours with an 8-ft. 6-in. maximum transport width. • Cummins Tier 4 Final engine • Variable width spread hopper from 1-ft. to 16-ft. • Application rate control, even while chipping • Left side features full controls with a right side remote control station

Wirtgen offers three wheeled recyclers: the WR 200i, WR 200 XLi, WR 240i and WR 250 models. • Equipped with a powerful milling and mixing rotor as well as cuttingedge injection systems, they mill and granulate asphalt pavements, inject binding agents and water in precisely metered quantities and mix it all in a single in-place operation. ForConstructionPros. com/12315450

ForConstructionPros. com/12313480

1 S

In C m te be th m sp •

F c

S

T a ro

Bagela BA10000 Portable Asphalt Recycler The BA10000 portable recycler takes broken chunk, milled (RAP) or leftover virgin plant mix and cranks out 10 or more tons of fresh hot mix per hour. • Comes standard mounted on an over-sized trailer, and is available as frame-mounted for static installation • Weighs 11,000 lbs. and measures 266-in. L x 91-in. W • 27-hp three-cylinder engine ForConstructionPros.com/20988335

Roadtec CIR Additive System The Roadtec CIR Additive System is used in the cold-in-place recycling of asphalt pavement in the repair and rehabilitation of asphalt-paved roads. • The system is used to transfer, measure and inject either emulsion or foamed asphalt to the cutter housing of the milling machine • The additive is then thoroughly blended with the milled material and transferred for paving • Mounted to the rear of the milling machine, the CIR Additive System is the same width as the mainframe of the milling machine ForConstructionPros.com/20866975

F c

C M

TI he an ai •

• • • •

• •

F c

www.ForConstructionPros.com/Asphalt

7/20/20 2:22 PM


d t ly a

nt

Secmair COMBI 1515 Chipsealer Sprayer Spreader Invented by Secmair in 1982 the Chipsealer is leader on the European markets. This technology has been redesigned for the North American market and its specifications. • The Combi 1515 combines two machines, a chipsealer and spreader, into one making it ideal for small jobsites residential areas, turning, narrow or loping roads ForConstructionPros. com/21021218

Weiler S200 Soil Stabilizer The S200 soil stabilizer features either a soil or combination rear-mounted rotor powered by dual planetary drive motors with a 150-rpm max drum speed. • 78-in.-wide drum has a 14-in. maximum working depth • Automatic load control anti-stall feature monitors system pressures to set ground speed ForConstructionPros. com/21108644

Neal Mfg Asphalt Road Preservation Package To provide efficiency and quality on detail and highvolume sealcoating applications, this package from Neal Manufacturing, a division of Blastcrete Equipment LLC, includes the drivable DA 350 dual applicator for quick prep work and sealcoating around curbs and gutters, and its High-Volume Road Maintenance Vehicle that delivers high material output for efficiency on large projects. ForConstructionPros.com/21018107

Cimline MA4 Longitudinal Joint Sealing The MA4 was designed to make longitudinal joint sealing easy for any paving crew to perform and enables paving crews to invest in longitudinal joint sealant freeing them of expensive alternatives. • Since it can be towed by a 1-ton work truck, the driver does not have to have a CDL license or and due to the tanks size no endorsements are required • The setup and operation is basic and allows the crew to perform the job when the timing is right for them freeing them from the constraints of contractors ForConstructionPros.com/21096327

KM International Pro Patch 55 Melter The Pro Patch 55 is a 55-gal. melter designed specifically to heat both mastic material and rubberized crack filling material. The Pro Patch 55 is similar in design to KM International’s KM 55 rubber melting machine with a few added features and upgrades to make it fully compatible with mastic materials.

Trade BPM500 Cracksealing Machine TICAB's BPM500 is designed for heating and pouring sealant for repair and construction work on highways, airfields, parking lots and bridges. • Engine: Kubota/ Könner & Söhnen / Lombardini • Beckett burner • 130 gal. • Thermal oil jacket • Electrically heated hose • Temperature controller • Self-propelled

• Thermostatically controlled • Hydraulically driven 360-degree agitation system • Triple wall insulation • 4-in. flow valve • Utility hand torch • 60,000 btu propane burner • Material ready to pour in 1 hour • Use standard crack fill rubber or mastic material

ForConstructionPros. com/21118447

ForConstructionPros. com/20989057

www.ForConstructionPros.com/Asphalt

ACON0820_68-71_PreservationEquip_J.indd 69

Bergkamp M310E Truck-mounted Slurry Seal and Micro Surfacing Paver Bergkamp's M310E Tier 4 truck-mounted slurry seal and micro surfacing paver with EMCAD (Electronic Mix Control And Diagnostic) is developed from the original M210 paver but features PTOdriven hydraulic pumps, eliminating the side engine. • Direct-drive hydraulics • EMCAD System manages power inputs and electronically controls material outputs • EMCAD displays current and average material ratios, total material used and material application rates • EMCAD electronically self-diagnoses and displays indication lights and diagnostics • EMCAD produces on-demand and end-of-day reports ForConstructionPros. com/21106523

AUGUST 2020 ASPHALT CONTRACTOR

69 7/22/20 9:56 AM


PRESERVATION PRODUCTS Sponsored By

PRESERVATION EQUIPMENT

Falcon 2-Ton Hot Box & Recycler Falcon's 2-Ton Hot Box & Recycler is available as a trailermounted machine or slip-in machine (truck-mounted/hook lift). This versatile Hot Box can keep cold mix asphalt workable all day and keep hot mix asphalt hot all day and keep it overnight. • Reclaim and recycle asphalt chunks and millings • 4,000-lb. capacity • Single 105,000 BTU diesel burner with electronic spark ignite • Triple-wall insulated, air jacketed • Automatic temperature control • Heated shoveling platform • Options include hydraulic dump function, dual burner recycling package and 30-gal. tack tank with spray system and hose reel ForConstructionPros.com/21122609

Roadtec SX-5e Stabilizer-Reclaimer

Cimline P3 TruckMounted Durapatcher The DuraPatcher Truck mount is the solution for ready to work patching. • Simple to use and high-performing • Especially useful in low clearance residential streets or areas with tight turning radii • 6 yd aggregate hopper keeps operators out working with fewer refills • Universal design easily mounts to most truck chassis ForConstructionPros. com/21095616

The Roadtec mid-size SX-5e stabilizerreclaimer features a new 513 hp Cummins QSG12 engine. • Weighing in at less than 58,000 lbs, the SX-5e is nimble yet powerful

• High torque hydrostatic cutter drive and multiple cutter speeds provide performance in both soil stabilization and asphalt reclamation ForConstructionPros. com/21092531

Spray-Tek Skid Steer Tack/ Sealcoating Tank The ST270 oil tank is a skid steermounted unit that can be used for tack oil application or sealcoating.

• Designed by paving contractors • Ideal for big or small projects where bringing a truck or trailer unit in is inefficient - i.e. parking lots, bridges, potholes, and highway patching • 270 gal. capacity, weighs 1100 lbs. ForConstructionPros. com/21135879

Etnyre Hydrostatic Drive Self-Propelled Chip Spreaders Self-propelled Chipspreaders are used by both contractors and municipalities to uniformly distribute cover aggregate into the hot liquid asphalt sprayed by an asphalt distributor truck. • Hydrostatic drive system and a variable width spread hopper apply multiple aggregate sizes and application rates thru a full range of travel speeds and spreading widths

Caterpillar RM400 Rotary Mixer The 51,809-lb. RM400 rotary mixer features an 8-ft. cutting width and is powered by a 417-hp C9.3 Tier 4 Final engine. • Standard all-wheel drive utilizes four independent drive pumps for maximum torque, traction and speed • Three different rotor speeds help deliver the desired material gradation and the electronic controller keeps the rotor at the proper depth and machine at a consistent speed to ensure optimal blending performance • Four rotor options are available for a variety of applications and a universal rotor with 200 point-attack carbide-tipped tools can be used for full-depth reclamation or soil stabilization ForConstructionPros.com/21086837

70

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_68-71_PreservationEquip_J.indd 70

• • • • •

Higher horsepower Reduced noise level Soft start conveyors Side mounted radiator Operator controlled auger and conveyor speed • Larger receiving hopper with variable height ForConstructionPros. com/20976849

www.ForConstructionPros.com/Asphalt

7/20/20 2:22 PM


®

®

k

e

s,

C R AC K P R O M E LT E R /A P P L I C AT O R S H AV E REVOLUTIONIZED THE CRACK FILLING INDUSTRY • The Industry’s Fastest Material Heating Time • State-of-the-Art Safety Innovations Including the Industry’s Lowest Profile Design - Provides Maximum Operator Safety

d

e

ZERO DOWN FINANCING FOR QUALIFIED BUYERS

f

Backed by Our Nationwide Dealer Network View the full line of Crack Pro equipment visit sealmaster.net LOCATIONS NATIONWIDE (800) 395-7325

ACON0820_68-71_PreservationEquip_J.indd 71

7/20/20 2:22 PM


PRESERVATION PRODUCTS Sponsored By

PRESERVATION SUPPLIES

GuardTop CoolSeal Pavement Sealer CoolSeal by GuardTop is an ultra high performance asphalt-based sealcoat that achieves lower surface temperatures with its lighter colored surface and higher reflectivity. • Using CoolSeal by GuardTop will produce measurable reductions in surface temperatures • CoolSeal by GuardTop has been tested and certified to meet the industry standard 33% solar reflectance design goal and is a long-lasting product that will seal and beautify pavements for up to seven years • Perfect for school districts, parking lots and LEED eligible building projects ForConstructionPros.com/20862401

Chemtek NeSilex Silica Dust Suppressant

Unique Ravel Check Asphalt Rejuvenator

NeSilex is formulated specifically to reduce worker exposure to respirable crystalline silica dust. • Recommended for any dust-producing construction activity including: milling, sweeping, crushing, mining, sawing, jackhammering, earthmoving and grading • Contains specially formulated surfactants, wetting and agglomerating agents causing dust particulates to saturate and attract to each other • Initial testing has shown up to 100% reduction in respirable silica dust in certain construction activities

Ravel Check is an asphalt based emulsion with penetrating oils and asphalt resins designed with LOCK THE ROCK technology to rejuvenate, preserve and restore asphalt based pavements. • Slows pavement deterioration in one application • Extends pavement life 3-5 years • Easy application • Stops moisture from penetrating surface • Rebinds asphalt and aggregate for added strength • Excellent adhesion to pavement surfaces • Available in bottles, pails, drums and totes

ForConstructionPros. com/20990518

ForConstructionPros. com/20867195

Cargill Anova Asphalt Rejuvenators

• •

• • •

Anova rejuvenators have demonstrated desirable impact on asphalt pavements containing highly aged RAP and RAS binder (reclaimed asphalt pavement and shingles) in documented results in the laboratory and in the field. Successfully used in pavements with up to 100% RAP usage In addition to shifting the PG grade of virgin bitumen, Anova modifiers also rejuvenate RAP and RAS restoring properties of the aged bitumen, allowing for more versatility in mix designs Has been shown to reduce required compaction temperature by as much as 20° C in high RAP pavements Does not negatively impact rutting resistance of rejuvenated RAP mixture Enhances low temperature cracking resistance of asphalt mixture, even at high RAP

ForConstructionPros.com/21019697

72

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_72-73_PreservationSupplies_J.indd 72

Crafco ActionPave Sealer Available in two formulations: RT (refined tar) and LP (petroleum resin, an alternative to refined tar sealer), ActionPave sealer is produced in four grade options:

• Classic — A professional-grade sealer • Pro — Professional-grade sealer improved with a proprietary blend of polymers that provide increased resistance to water and UV degradation, while maintaining the rich, black color longer • Supreme — A superior-grade sealer that doubles the proprietary blend of polymers of Pro to deliver our highest-performing, longestlasting sealer • Aviator — A premium-grade sealer formulated exclusively for airports that is manufactured and adjusted to meet FAA Specification P-631 ForConstructionPros. com/21071169

Road Science ArrTekk CRS Emulsifiers ArrTekk CRS emulsifiers deliver optimal emulsion viscosity characteristics which remain consistent through time and across a wide range of asphalts for more efficient and cost-effective chip sealing. • ArrTekk 706 and 737 cationic rapid-setting (CRS) emulsifiers use cutting-edge chemistry to achieve desired chip seal emulsion viscosity across a broad range of asphalts, and at least 50% faster cohesive strength development between emulsion binder and chip aggregate, reducing asphalt costs, chip seal construction time and windshield damage claims • ArrTekk 706 and 737 emulsifiers deliver optimal emulsion viscosity characteristics ForConstructionPros. com/21047877

W

41

www.ForConstructionPros.com/Asphalt

7/20/20 2:26 PM


All Aluminum Live Bottom Trailers and Truck Bodies

ALL ALUMINUM LIVE BOTTOMS

Built By a Paving Contractor for Paving Contractors

r

o

nd e

– Lightest in the Industry! In Some Cases, As Much As 2 1/2 Tons Lighter Than the Competition! – Extra Payload = Extra $ THE SAFER WAY TO PAVE!

,

4003 Tiffin Ave., Sandusky, OH 44870 419-625-8953 • 888-608-1997 • www.pegasustrailers.com ACON0820_72-73_PreservationSupplies_J.indd 73

7/20/20 2:26 PM


ROAD BUILDING SUPPORT TECHNOLOGY Topcon SmoothRide Data Collection Software The RD-M1 Collect 2.0 includes updates designed to facilitate and optimize mapping of road conditions. • Improved interface simplifies setup and automatically detects the position of the wheel sensor • Memos feature allows balloons with messages to be added onto the map during data collection and made visible in the processing software • Plan Route feature allows for the import of kml files of predetermined routes ForConstructionPros. com/20986180

Transtec Group Veta 6 Construction Management Software Veta 6 is a free map-based intelligent construction data management software tool that enables contractors and highway agencies to analyze and report data collected from intelligent compaction (IC) rollers and pavermounted thermal profilers (PMTP)/ infrared (IR) scanners or cameras. ForConstructionPros. com/21133800

Tenna Equipment Fleet Management App The Equipment Fleet Management app provides access to your asset information from Tenna’s One Platform at your fingertips. • Scaled-down version of the online platform is synced to the cloud and allows you to create new assets, edit existing assets and connect installed trackers to the platform • Access and update pertinent asset details such as status, condition, location, assignee and more ForConstructionPros. com/21092158

74

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_74-75_Technology_J.indd 74

Earthwave Construction Management Solution Earthwave's Construction Management Solution (CMS) is a wireless telematics systems that features the GS-364 hardware platform that connects directly to the computer/bus of off-road equipment, delivering real-time data. • Breadcrumb Trail shows detailed location information for the machine for the day selected • Geozone automatically tracks machine's activity within that Geozone, and when it arrives and leaves the Geozone • Maintenance Due Report shows the number of run-time hours before maintenance ForConstructionPros.com/21091712

ClearPathGPS Tracking System Live GPS vehicle tracking automatically monitors the comings and goings of your fleet and sends you text or email alerts when ignition events occur or geofence boundaries are crossed. • Simple, easy to use software web platform and apps • Provides a complete history of every route a driver took or every stop made over the last year • Ignition summary, engine hours and periodic maintenance reports help ensure equipment stays in peak shape • Integrations include routing software, field service management software, ELD/ HOS, fleet maintenance and more ForConstructionPros.com/21061506

Roadtec Guardian Telematics System

Trimble Viewpoint Analytics

The Guardian Telematics System consists of software, on-machine viewing screens and wireless signal boosters to send and receive data at the machine. Guardian enables live wireless communication between the machine and a remote location. • Guardian’s intuitive Live Schematics lets owners and technicians view electrical circuits in a simple, efficient layout with real time status of switches, valves and settings

Delivered as part of the ViewpointOne construction management suite, Viewpoint Analytics makes data accessible to all parts of the organization, ensuring employees in the back office, on project teams or in the field can access and analyze the results for easily consumed self-service reporting, whenever and wherever they need it. • Standardize company reporting on a modern technology stack that makes it easy and efficient to access data

ForConstructionPros. com/10913506

ForConstructionPros. com/21136289

Libra Sentinel GPS Truck/Asset Management Solution The Libra Sentinel Asset Management Solution is a cloud-based GPS system designed to be a complete asset management solution. When coupled with your other Libra systems, Sentinel provides a seamless, end-to-end solution for tracking and managing assets. • Seamless Integration with Libra Solution Suite • Mobile app or vehicle mounted options ForConstructionPros.com/21108646

www.ForConstructionPros.com/Asphalt

7/22/20 10:00 AM


e

n,

Engineered Specifically for Asphalt Milling Machines

a s

• The only Track Pad with a 2,000Hr Wear-Life Guarantee* • Largest Possible Footprint for the best traction, even on wet surfaces • Lowest Life-Cycle Cost from long wear-life that can double the time between replacements.

t

*Refer to Terms & Conditions at www.SuperiorTire.com

1.800.289.1456 www.SuperiorTire.com ©2020 Superior Tire & Rubber Corp. All Rights Reserved.

ACON0820_74-75_Technology_J.indd 75

7/20/20 2:28 PM


Si

ROAD BUILDING SUPPORT SITE PREP & EARTH MOVING Case C Series Motor Graders The 836C offers 138 to 156 hp and an operating weight of 24,466 or 27,128 lbs. (AWD), while the 856C has a 173to 190-hp range and operating weight of 33,966 or 34,848 lbs. (AWD). • Ergopower transmission and torque converter provide smooth automatic shifting • 100% automatic differential lock and automatic no-spin power splitting instantly transfer torque from a slipping tire to one with more traction ForConstructionPros. com/21032904

Mauldin M415XT Maintainer The M415XT maintainer now comes standard with a Cummins 3.8L Tier 4 engine with 130 horsepower. • Propelled using two hydraulically powered solid axles giving the machine better traction in all scenarios over its predecessor's planetary driven system • Intuitive new design helps increase operator productivity while complimenting operator comfort ForConstructionPros. com/21114949

Dynapac CA1400 Soil Roller The Dynapac CA1400 soil compactor is a vibratory roller designed for compaction operations in streets, parking lots and pipe trenches.

Hyundai A Series Excavators The A Series excavator models are powered by Cummins Performance Series Stage V engines offering more than a 10% increase in power and nearly 20% increase in torque compared to previous engines, all while using less fuel. • HX210A features a 170-hp Cummins B4.5 diesel engine, a standard operating weight of 48,720 lbs. and is equipped with a standard 0.80-cu.-yd.-capacity bucket • HX85A compact model has a 65-net-hp Yanmar 4TNV98C engine, a 20,390-lb. operating weight with 12-ft. 10-in. two-piece boom, standard bucket capacity of 0.33 cu. yds. and optional four-way dozer blade ForConstructionPros.com/21124109

Komatsu GD6557 Motor Grader The GD655-7 provides ergonomic working environment and a spacious cab with low-effort equipment and steering levers, transmission controls and articulation stop-at-center. • 218-hp SAA6D107E-3 Tier 4 Finalcertified engine with Komatsu DPF • Dual-mode powershift transmission (eight forward/four reverse) with on-the-go full-power shifting, inching capability and automatic shifting in higher ranges ForConstructionPros. com/21061280

Caterpillar 725 Articulated Truck The 725 articulated truck has a 26.5ton payload (19.6-cu.-yd. heaped) and is powered by a 342-hp (gross) Cat 9.3 ACERT Tier 4 Final engine with Clean Emissions Module package. • CX31 six-speed transmission with advanced features to deliver smoother shifting, up to 8% greater acceleration and increased speed on grade of as much as 9%

• • • • • • • •

Tr Ov De 6’ De Tir Br Ra

ForConstructionPros. com/21127786

Caterpillar COMMAND for Soil Compaction Cat COMMAND for Compaction is an operator-assisted technology that automates the soil compaction process, maintaining constant speed and correct pass count with consistent and precise overlap for enhanced compaction quality. • Available as a dealer-installed kit on new and existing B-Series vibratory soil compactors • In-cab display with intuitive touchscreen interface allows easy setup as the system connects to common base stations with no back office or design needed ForConstructionPros.com/21086839

Caterpillar 140GC Motor Grader • Compaction width is 66-in. and static linear load 20 kg/cm, giving the machine the ability to compact sand and gravel down to 20 in. • Two amplitudes, high at 0.067 in. and low at 0.032-in., makes the machine versatile and suited for all supporting and reinforcement courses ForConstructionPros. com/21120719

76

The new Cat 140 GC motor grader is designed to combine high performance with low owning and operating costs. • The 140 GC’s powerful Cat C7.1 engine, 6F/3R automatic power-shift transmission • Precisely designed hydraulic system ensure balanced performance in all operating situations • An ECO operating mode and demand-fan reduce fuel consumption, and extended maintenance intervals further reduce operating costs • Operators of all skill levels quickly achieve high production with the 140 GC, and options that include adjustable seats and efficient heating/cooling systems ForConstructionPros.com/21123220

ASPHALT CONTRACTOR AUGUST 2020 www.ForConstructionPros.com/Asphalt

ACON0820_76-77_SitePrep_J.indd 76

7/22/20 10:04 AM

Fo


Simple, Fast, and Convenient! Visit EagerBeaverTrailers.com and you're a "click" away from getting all the information you need from our nearest dealer.

20 XPT

t g

• CAPACITY: 40,000 lbs. • 20 Ton Air Brakes • 8 Degree Loading Angle Low Profile

3

n

s

• • • • • • • •

Trailer Weight: 8,380 lbs. Overall Width: 102", Length: 31'4" Deck Length: 21’ Flat (model shown) 6’ Beavertail Deck Height: 34" Tires: Eight 215/75R17.5 (H) Brakes: Air (Full ABS System) Ramps: 72" Long x 22” Wide Range: 102" Max. 29" Min.

HIGH TENSILE MAIN RAIL One piece and cold formed. CROSS MEMBERS pierced through Main Beam for lowest possible deck height and more unitized frame.

ONE PIECE CAST LUNETTE EYE Tested @ 275,000# and wrap around nose plate. Standard on all trailers.

Outboard brake drums for easier maintenance.

OAK DECK Oak decking is fastened to the crossmembers with bolts and deck washers making it easier to replace decking when required.

HEAVY DUTY 2-SPEED PARKING JACK 70,000# static capacity.

ALL WHEEL ABS with Spring Brakes on all axles. Standard on all air brake trailers.

100% SEALED WIRING HARNESS & LED LIGHTS USA Harness “PLUS” (positive lock under seal). Standard on All Trailers.

HUTCH 9700 ADJUSTABLE 3-LEAF SUSPENSION

SUMITOMO BRAND TIRES

National Dealer Supported.

HUB PILOTED WHEELS

Standard on all 15-25 Ton trailers.

Standard on all 15-25 Ton trailers.

98” WIDTH 92” WIDTH

70

LIGHTWEIGHT WOOD RAMPS

with DOUBLE ACTING SPRINGS for lift off ground and off Beaver Tail. Grade 100 High Tensil Steel

Standard Features On All Easy Loaders

Eager Beaver WIDE TRACK AXLES: 98” (O.A. Width) Some Competition - 92”

th

ANNIVERSARY

1946-2016 EagerBeaverTrailers.com

For a quote on any model, please call 800-257-8163

ACON0820_76-77_SitePrep_J.indd 77

7/20/20 2:29 PM


ROAD BUILDING SUPPORT TRUCKS & TRAILERS Volvo I-Shift Safety and Performance Features

Eager Beaver 50 GSL-PT Paver Trailer

Additional safety and performance features have been incorporated into the I-Shift, • Auto Neutral feature helps reduce possibility of truck moving as a result of inadvertent throttle application • Paver Assist for VHD model dump trucks helps eliminate bumps and disturbances in the pavement laying process

The 50 GSL-PT has a 100,000-lb. load capacity and 122,700-lb. GVWR and is suited for loading rollers, pavers and milling machines. • Tapered four-beam, 16-in.-deep cambered I-beam mainframe and side rails • 10-in.-deep crossmembers pierced through the mainframe

ForConstructionPros.com/12317808

Talbert 55CC-RP Roller Paver Trailer

Etnyre RPS 03 Paver Special Trailer

The 55CC-RP has a concentrated load rating of 55 tons in 12.5 ft. of deck for hauling various equipment including rollers, pavers, excavators and dozers. • 53-ft. length with a 24-ft. clear deck length in the well • 22-in.-high deck with 6-in. loaded road clearance • 41-in.-long tapered ramps can be adjusted to accommodate various widths of equipment • 57-in. rear slope has a 20.2 ° load angle suited for loading asphalt and soil rollers

Transport a roller, paver and broom in one load with the Blackhawk Paver series trailers. • Offer 24 ft. of deck space and a low loading angle of 18° for fast and easy loading and unloading of equipment • Available in Hydraulic Removable Gooseneck Paver Special or Rear Loading Paver Special ForConstructionPros. com/20866800

ForConstructionPros. com/20966836

Pitts Fixed Neck Trailers Pitts fixed-neck trailers offer capacities of 70,000 (LB35/LB35-CS) and 102,000 lbs. (LB51/LB51-CS) in 16 ft. • Full-width top deck with gradual slope or exposed beam with motor grader ramp neck designs • Pre-camber fully fabricated main frame (4) I-beam design • 26-, 33- and 38-in. loaded deck heights • Premium 1.5-in. apitong flooring • Double-folding hydraulic ramp with 8° load angle ForConstructionPros.com/21065249

Felling Air Bi-Fold Ramps

• • • • • •

Felling Trailers' Air Bi-Fold Ramp system features patent-pending technology that allows for minimal ground contact when deploying/retracting the ramps to reduce damage to new pavement when loading/unloading. Flip ramp locks out fully when extending preventing scraping or marring of the ground Controlled flow air ramp technology provides for soft ground contact of the ramp 45 in. wide by 11 ft. wood inlaid 9.5-degree load angle Use onboard air system to power ramps Optional air ride suspension when air is dropped

ForConstructionPros.com/21119186

78

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_78_TrucksTrailers_J.indd 78

ForConstructionPros. com/20979451

Pegasus Live Bottom Truck Bed The extruded aluminum interlocking components on this all-aluminum body create a fully unitized structure that is strong, light and durable, plus allows for increased payload. • Ultra-wide belt gives a low center of gravity and fast, controlled discharge of material • Includes a 45-in. hot asphalt belt, smooth sides, aluminum fenders and dual-chain drive ForConstructionPros. com/21075825

DBS Dump Trailers CornPro's DBS dump trailers are available in 10-, 12-, 14- and 16-ft. low profile options. • Standard 12-guage sides on a 10-gauge floor • 2-in. by 2-in. tubing uprights • 11-gauge diamond plate fenders and running boads • Champion scissor hoist • Dexter Torflex torsion axles • All-axle electric brakes • Payload: over 8,000 lb. ForConstructionPros. com/21126106

www.ForConstructionPros.com/Asphalt

7/20/20 2:30 PM


CLASSIFIEDS Seeking to acquire asphalt plant business

SAFE AND EFFICIENT Lo Riser Inclining Platform Trailers Get the Job Done. With a Lo Riser you’ll see:

With or w/out aggregate source N.E, S.E, Mid Atlantic regions.

CONTACT: Spetrovits91@gmail.com

Lower specialized equipment costs

Lower worker's comp claims

Lower labor costs - one man loading offers more deliveries daily

The 4 degree load angle is ideal for low ground clearance or reduced gradeability equipment.

Lower GVWR

- four-to-one payload-to-trailer weight ratio - high strength steel safely handles the rated payload while keeping the trailer weight to a minimum - no rollback truck required, just a pickup truck

- enhanced safety features eliminate most opportunities for injuries - no heavy tailgates and no more dangerous, slanted ramp boards

PUMP PACKING

Get a Lo Riser working for you.

Stop your pumps from leaking!

Pre-cut packing sets proven within the Asphalt Industry. Viking®, Roper, Rotan, etc. Call Scott at 1-800-231-4209 www.rainsflo.com

*shown with optional paint color

1-800-369-5365

INCLINING PLATFORM TRAILER Manufactured by: The Advance Metalworking Company, Inc.

www.advancemetalworking.com

SUMMER, 2020

USE PROMO CODE = SUMMER

5% - 15% DISCOUNT ON ACE MANUFACTURED PARTS! Your O ne Stop Source For…

RAPWRANGLER

PAVER WEAR PARTS PLANT EQUIPMENT & PARTS LIVE BOTTOM TRAILER PARTS WINDROW ELEVATOR CHAINS PICK UP MACHINE PARTS SHUTTLEBUGGY MTV PARTS MATERIAL TRANSFER DEVICE PARTS

www.asphaltace.com www.ForConstructionPros.com/Asphalt

ACON0820_79-84_Classifieds.indd 79

1-888-878-0898 1-0898

3 Models Available

SHAKER DECK

Several Models Available

michael@asphaltace.com AUGUST 2020 ASPHALT CONTRACTOR

79

7/20/20 2:42 PM


CLASSIFIEDS

A

A Revolutionary New Era in Burners

·S d ·G m ·A p ·B d ·A c ·G ·B ·A s ·A ·C d ·1 ·A ·A

A Division of Reliable Asphalt

Single Motor, Total Air Burner

Simple Design, Minimum Moving Parts

Runs Multiple Fuels, Simultaneously if Required

Optional Blower Mount Configurations

Energy Efficient Over Other Brands

Coaxial Blower

E

E

521 Old 7 Mile Pike • Shelbyville, KY 40065 • Office Toll Free (866) 647.1782 • Fax (502) 647-1786

www.ReliableAsphalt.com

80

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_79-84_Classifieds.indd 80

www.ForConstructionPros.com/Asphalt

7/20/20 2:42 PM


t

CLASSIFIEDS

ASPHALT PLANTS · Stationary 400 TPH counterflow drum mix plant · Gencor 300 TPH counterflow drum mix plant · Astec 350 tph Relo Double Barrel plant w/4 silos · Barber Greene 350 tph portable drum mix plant · ADM 325 TPH Milemaker counterflow drum mix plant · Gencor 7’X40’ counterflow plant · Boeing 200 stat. drum mix plant · Adm 100 tph stationary plant with silo & RAP · ADM 110 tph portable drum plant · Cedarapids 350 tph counterflow drum and baghouse · 150 TPH Stationary drum mix plant · Astec 6000# tower and elevator · Astec 36” x 105’ slat conveyor

   · Standard Havens 38,000 CFM baghouse · 80,000 CFM Stationary Baghouse · Astec 400 tph Double Barrel only · CMI 600 barrel portable selferecting dust silo & pugmill · Astec 75 ton self-erect silo · ADM 42,000 CFM portable baghouse · Bituma 100 ton silo & slat conveyor · ADM six bin cold feed system · Heatec hot oil heater · Coneco 10 yard portable concrete plant

Please Call For Complete Inventory

Plant for sale? Call Clancy! Serving the Asphalt Industry for 50 years

E.T. CLANCY COMPANY 219-879-8231 • 800-348-8553 Email: sales@etclancy.com • www.etclancy.com

www.ForConstructionPros.com/Asphalt

ACON0820_79-84_Classifieds.indd 81

 

   

 

    

   

  

 



 

AUGUST 2020 ASPHALT CONTRACTOR

81

7/20/20 2:42 PM


Index Advertiser Index

PAGE

Advertiser Index

PAGE

ACE Group LLC

79

Libra Systems Corp.

29

Advance Metalworking Company

79

Meeker Equipment Co. Inc.

19

ALMix

9

Minds, Inc.

15

Asphalt Drum Mixers Inc.

13

National Pavement Expo

59

Astec Inc.

27, 31, 35, 39, 42-43

Paratherm

28

BITCO

2

Pegasus Vans & Trailers, Inc.

73

Blacktop Maintenance Corp.

79

Phoenix Industries

25

Blue Roads Solutions

17

R&D Hydraulics Mfg. & Machine Co.

81

Carlson Paving Products Inc.

83

Rains-Flo Manufacturing

79

Dynapac North America

47

Reliable Asphalt Products

80

E.T. Clancy Co. Inc.

81

Roadtec

84

Eager Beaver General Engines

77

Schutte-Buffalo Hammermills, LLC

22

Gencor Industries Inc.

3

SealMaster

71

Heatec/Div. Of Astec Industri

16

Superior Tire & Rubber Corp.

75

Hog Technologies

67

Systems Equipment

7, 21

Homestead Valve

23

Tarmac International, Inc.

32

Hydronix Americas

44

Thermo Max Corporation

82

IGNITE Construction Summit

37

TransTech Systems, Inc.

63

Ingevity

45

Weiler Products

49

Kenco Engineering, Inc.

20

Wirtgen America Inc.

5, 54-55

KTP Enterprise. Fast Measure

81

LeeBoy, Inc.

51

CLASSIFIEDS The FUEL MISER® System will reduce your fuel costs…

GUARANTEED!

Diamond Embossed Aluminum

• Available in 3 Smart Coverings • Weekend Installations Our Specialty • Determine Your Savings Now Using Our Interactive

Black Embossed Aluminum

Fuel-Savings Calculator. Go to www.thermo-max.com

Specializing in Retrofit Installations Bright Stainless

82

ASPHALT CONTRACTOR AUGUST 2020

ACON0820_79-84_Classifieds.indd 82

DRUM INSULATION LEADERS - Since 1986 The Original And Still The Best!

www.ForConstructionPros.com/Asphalt

7/20/20 2:42 PM


t

ACON0820_79-84_Classifieds.indd 83

7/20/20 2:42 PM


A NEW KIND OF POWER TOOL

OUR MOST POWERFUL PAVER The RP-250’s large tires and frame-raise provide ideal weight distribution and tractive effort. Steering is assisted by the rear wheels so you have precise control, especially in turning. With 250 horsepower, this paver provides the power you need.

See the full range of products at roadtec.com

© 2020 ROADTEC. INC. ALL RIGHTS RESERVED

ACON0820_79-84_Classifieds.indd 84

1.800.272.7100

Dedicated to Your SuccessSM

1.423.265.0600

7/20/20 2:42 PM

Profile for ForConstructionPros.com

Asphalt Contractor August 2020  

Asphalt Contractor provides HMA material producers, highway contractors and public works officials with critical "how-to" information on the...

Asphalt Contractor August 2020  

Asphalt Contractor provides HMA material producers, highway contractors and public works officials with critical "how-to" information on the...