EXHIBITION DISPLAY INTERIOR SOLUTIONS
SMART-Lift FRAME
SMART-Lift FRAME
EXHIBITION DISPLAY INTERIOR SOLUTIONS
– easy exchange of facade banners
SMART-Lift FRAME is delivered in a complete kit and it is very easy to assemble. The banner can be easily changed without using an installation company or skylift. Cover plates that hide the top profile are included. SMART-Lift FRAME is delivered in any width up to 24 meters. Over 12 meters, 1 winch per side is used.
The top profile mounts on the wall. Is delivered with preassembled wheels.
The SMART-Lift needs to be mounted on a flat surface. If the banner is to cover protruding fittings you will need to fit spacers to enable the banner to be hoisted up and down without colliding with the protruding parts. Banner, spacers and any lighting are not included. Outer dimensions of the SMART-lift FRAME - Width = Image dimensions + 350mm - Height = Image dimensions + 680mm If the banner will be placed higher than 1.5m from the ground, it is recommended to switch to the SMART-Lift Extend. The SMART-Lift Extend has extended side profiles that make it possible to change the banner from the ground even if the banner is high above the ground.
Winch with detachable crank FACTS Natural anodised aluminium profiles is supplied in 6 m stock lengths or can be cut to custom sizes. Recommended media: Net vinyl or Vinyl with 7.5-10 mm keder sewn on 4 sides. The SMART-Lift FRAME is adapted to the size of the banner. Banner size Art no
Name (bxh)
012.xxx.xxx
SMART-Lift FRAME
012.300.200
SMART-Lift FRAME 3000x2000
< 12m
Recommended size, 1 winch
Size
Recommended size, 2 winches
< 12 m
12-24 m
1 x Winch (mounted on the right or left side)
2 x Winch (mount one on the right and one on the left side)
1x winch
Keder 7,5-10 mm
Adapted from a banner 3000x2000 mm
2x winch
Profile Keder FRAME 45x40 mm
www.fogasystem.com
ProfileKeder 44x17 mm