A marble floor can bring an illuminous and elite finish to a room. After all, a room, be it an office one or home one doesn’t just comprise of the walls and roof. The flooring is equally important and at times can create or distort an ambience of the room. A dirty or stained floor can bring out the entire room’s décor and create a bad impression on the visitor. There are ways to take care of the flooring problems. The very step is to make sure that the evident scratch marks or etches. Then the marble polishing powder and floor polishing products can be used. There are many variants of the polishing products for different types of floors. Some of them reduce the thickness of the floors while some add to it. Either the case, the flooring is cleaned and polished, at the end of the day.
• Use the Bonastre Novamarmol Powder: The crystallizer powder has no wax or polymers. The novamarble powder forms all the stones, and calcareous marbles, hardening the surface and obtaining a very crystal clear, resistant, nonslip and easily washable flooring. The novamarmol powder cleans, brightens and revives the colours of any marble floor. You will accomplish a high shine, in addition to strengthening the surface giving it long durability obtaining a very durable and resistant to wear.
• This powder helps you to restore the gloss to marble floors and surfaces. Most of the marble polishing brands benefit from high-tech solutions and their products deliver the wet and gloss looks on the application area. Also, you can use this kind of powder for limestone and travertine floors and surfaces, as well. • All you need to do is to sprinkle a small amount of the powder on the dull area only and then spray with water in order to achieve a paste-like solution. Think of it as a kind of toothpaste; it should not be too runny or too thick. Just make sure that you use enough amount of water. • Then, take a bonastre pad and apply the creamy powder on the area with circular motions. You can use the bonastre pad with a cleaning machine or use the smaller sized hand applicator kit. When you are done, just wipe dry the area. That is all. If you like, you can add a final buffing with a polishing pad. • Also depending on the dull look, you might need a second application. But if you have a regular cleaning routine for marble surfaces, the second application will not be necessary. The floor polishing duties are usually handled by the cleaning or housekeeping staff. Thus, either when the staff is not trained properly, they might abuse the tools and equipment or the staff is not willing to undergo so much of pain to get the marble floors shiny. With the use of marble polishing powder and bonastre pads, you can achieve a flaunting shine of the floorings and also add some thickness to the floor. This promises durability. To know more about the above topic, or book a set of polishing products: Visit: http://floorcareco.in/or shop now at https://www.amazon.in/dp/B08BM6XRX9 Call: 9871-007-991