Pall Corporation

Super Caddy Specifications

Process Fluid Type: Hydraulic and lubricating oils having a minimum flash point of 200 F (93 C) per ASTM D92 or 180 F (82 C) per ASTM D93.

Seal Compatibility: Nitrile seals: compatible with most mineral based oils.

Inlet Fluid Temperature: +160 F (66 C) MAX

Inlet Pressure: 14 HG to 15 PSIG (a positive inlet pressure may damage pump shaft seals and cause fluid loss)

Fluid Circulation Rate: 0-13 GPM (0-49 LPM)

Operating Viscosity: 1300 SUS (260 cSt) MAX

Electrical Power Requirements: 120 VAC, 1 Phase, 60 Hz, 19.5 Amp

Hose Connections:

Inlet: 1” NPT, Hose 15’ with 3’ x 1” 304 SS wand

Outlet: ¾” NPT, Hose 15’ with 3’ x ¾” 304 SS wand

Electrical Control Box: NEMA 12 consolette containing PLC, variable speed drive, operation controls, indicator lights, particle counter display, water sensor display, USB connection

Motor: 1 HP, 90 VDC Variable Speed

Pump: Marzocchi external gear pump, 1.713 cubic inch displacement; flow rate to 13 gpm at 1750 rpm; 125 psi internal relief valve

Wheels: 10-inch pneumatic wheels

Particle Filter: Pall Ultipleat® SRT filter particle removal filter assembly. Particle filter removal rating: x(c)=1000

Water Removal Filter: Pall PallSorbTM water removal filter assembly. Filter element removes free water.

Particle Counter: Laser particle transducer and display for measuring particle contamination; reports data (at 5 minute intervals) as ISO 4406 cleanliness code. Download results to a PC via USB connection.

Water Sensor: Monitors dissolved water content in system fluid and displays measurement as percent of fluid saturation.

Suggest:

If the above button click is invalid.

Please download this document first, and then click the above link to download the complete manual.

Thank you so much for reading