Fibrolux · Ballistic Composite Panels

V e r s t채 r k t e k u n s t s t o f f e

BALLISTIC COMPOSITE PANELS bullET-ProoF AND ExPloSioN-rESiSTANT PANEl MATEriAl

V e r s tä r k t e K u n s t s t o f f e

Fibrolux BCP (BALLISTIC COMPOSITE PANELS) BULLET-PROOF AND EXPLOSION-RESISTANT PANEL MATERIAL

Fibrolux enables the use of composite panels, which were originally developed for military purposes, for civilian applications. The panels can be used both as single component armour, as well as in combination with other materials for reinforced armour. By combining multiple panels, increased safety levels can also are achieved.

Ballistic Composite Panels have the advantage, that they can, as opposed to conventional materials, capture bullets and splinters upon impact and enclose them.

ADVANTAGES high protective effect at low material thickness low weight - therefore easier to transport and assemble easy to process with carpenters tools (hard metal) corrosion and chemical resistant, therefore no protective coating needed

+150°C

very high mechanical strength, insensitive to mechanical influences

-100°C

thermally insulated electrically insulated electromagnetically transparent maintenance-free, significantly longer life than steel

0°C

Fibrolux bCP (bAlliSTiC CoMPoSiTE PANElS) bullET-ProoF AND ExPloSioN-rESiSTANT PANEl MATEriAl APPLICATIONS security doors and windows bullet-proof dry walls mobile room systems & containers mobile dividing walls guard- and gate-houses shooting stands and ranges bank counters police and government buildings security areas judges stands / speakers lecterns buildings of justice protective housings for industrial plants (e.g. compression testing devices)

© Fibrolux 201201 001

TECHNiCAl DATA plate thickness

13 mm

weight

25,5 kg/m²

application range

-30 to +60°C

fire class

DIN 4102 ASTM E-84-98 UL94 V

width

1000 mm

length

2000, 2500, 3000 mm oder nach Maß bis 12000 mm

bending strength

320 MPa

tensile strength

300 MPa

compressive strength

420 MPa

E-modul e

30000

impact strength iZoD

180 KJ/m²

water intake

< 0,15 %

| B2 | < 25, class A |V0

V e r s t채 r k t e k u n s t s t o f f e

Fibrolux bCP (bAlliSTiC CoMPoSiTE PANElS) bullET-ProoF AND ExPloSioN-rESiSTANT PANEl MATEriAl

In planning and assembly it should be noted that joints and corners should have an additional covering. This may be accomplished by a staggered mounting of the panels, or by attaching an additional layer with sufficient overlap at the gap.

If the wall thickness of the panels is reduced, the penetration resistance at this point is no longer guaranteed; in this case an additional coverage should be mounted.

Fibrolux bCP can be processed with conventional tools (hard metal).

Fibrolux bCP can be varnished, painted or decorated by adding an additional coating of foil etc.

CErTiFiCATES calibration

model

standard

level

panel

.357 Mag

FMJ/CB/SC

VPAM APR2006

4

1x13 mm

.44 Mag

FMJ/FN/SC

VPAM APR2006

4

1x13 mm

7,62x39

FMJ/PB/FeC

en1063

6

3x13 mm

5,56x45 (M-193)

FMJ/PB/SC

en1063

6

3x13 mm

7,62x51 (M 80 NATO)

FMJ/CB/SC

en1063

6 (teil II)

3x13 mm

7,62x51 (M 80 NATO)

FMJ/CB/SC

nIJ 0108.01

III

13/7/13/7 mm

.44 Mag

FMJ/FN/SC

nIJ 0108.01

III a

1x13 mm

STANAG 2920

V50=630,7 m/s

1x10 mm

1.1 FSP

9 mm

.357 Mag

.44 Mag

5,56x45

7,62x51

V e r s t채 r k t e k u n s t s t o f f e

V e r s tä r k t e k u n s t s t o f f e

Fibrolux GmbH • Hessenstr. 18 • D-65719 Hofheim/Frankfurt • Germany Tel: +49 6122 9100 0 • Fax: +49 6122 1500 1 ballistics@fibrolux.com • www.fibrolux.com