Post Driver Options Puljak’s 4-way Fence Tool is the “Fenceman’s Friend”

With more than 30 years in the fencing business, REDI Driver has learned a thing or two along the way. Having the right equipment makes any job easier and they have assimilated a selection of tools that make a difference.

“We’ve driven more posts and built more fences than we could ever count,” says Mark Evans, president of REDI Driver. “And we’ve done it the hard way. Using a tow behind compressor and a pneumatic driver; towing, starting and stopping, then towing, starting and stopping some more. All the while raveling air hoses. So, when we learned about an amazing hose-free, hassle-free gas-powered post driver, we had to see for ourselves, and now we offer it.”

The REDImultiadapter was designed to be used with the REDIboss78 post driver for driving Master Halco Postmaster posts. It is an adapter that bolts onto the REDIboss78 post driver with a profile that will accommodate all sizes of the Postmaster posts. “With the addition of REDIhndlkit2.5 extension, you can drive and grade posts from the ground,” says Lorri Evans, vice president of REDI Driver.

The REDIguideadapter was designed to be used with the REDIboss78 post driver for driving fiberglass flexible types of guideposts and trail markers. It is an adapter that bolts onto the REDIboss78 post driver with an insert that is customized for the desired profile. There is also a secondary hammer that is long and narrow for good, even hammering on top of the flexible post.

“We believe in simplicity and performance,” Lorri says. “We can help direct contractors to the right tool for the job, and even bundle the tools, depending on the project.”

For more information, visit www.redidriver.com.

Puljak’s 4-way Fence Tool is the “Fenceman’s Friend”

Fence contractors use many different tools for their trade, with different requirements based on the type of fencing material and gate installation need. This means they often haul a wide assortment of tools to the job site to make sure they have the right tools for any situation that might arise. Any piece of equipment, like Puljak’s 4-way Fence Tool, that helps a contractor haul less and do more becomes a preferred part of their tool kit.

The Puljak Company has been manufacturing the Superb 4-Way Fence Tool since 1958. It’s become so popular over the years, it’s become known across the industry as the “Fenceman’s Friend” because of the man-hours it saves. It allows contractors to complete fence and gate jobs formerly requiring additional equipment and extra work hours in record time.

The Puljak workhead is made of a rugged, malleable iron that is heat-treated. This heavyduty tool has a reliable action and smooth powerful stretching with over 1,000-pound pulling capacity. If needed as a one-man operation, the workhead can be reversed for lifting without gears or cables, and features a safe release lever.

The workhead fits posts up to 3.5-inches in diameter and comes with optional rod lengths in 2.5 – 4 feet.

Puljak is a versatile tool that can be used on chain link, rebar, heavy duty hex, woven wire, welded, wire mesh and galvanized steel fences. It can be used to stretch chain link and barbed wire fences and gates. It lifts and pulls or pushes in precise, minute steps. The Puljak aligns fences and gates in exactly as needed for clamping position.

Each Superb 4-Way Fence Tool is handassembled in Puljak’s Pennsylvania production facility and bears the “Make in the USA” stamp on the workhead. Learn more at www.puljakusa.com.

Features of the Superb 4-Way Fence Tool include: • Reliable action • Engages the standard tension bar • Available with length options of hardened steel rods • Smooth, powerful stretching • Reverse workhead for lifting • No gears or burdensome cables • One-man operation • Safe, convenient release lever