CUTTERBARPerfectCUT
WELDED DESIGN
The most durable design of cutterbars
Much more resistant to twisting than bolted cutterbars
Enables perfect fitting of components (skids, inserts) into the cutterbar shape
100%
PLANETARY DRIVE
Drive transmitted onto discs through large gear wheels only
(Ø 215 mm)
Idle wheels drive only a particular disc and not any other drive gears
GEAR WHEELS
Precisely ground, large gears (215 / 21 mm) with constant meshing of 3,5 teeth
High level of gears meshing ensures:
Constant, loose-free power transmission
Trouble-free operation
Large wheels also means: Durability
Longer service life of bearings
Quiet operation
GEAR WHEELS DIMENSIONS
Dimensions of idle wheels:
– 215 mm wheel height – 21 mm
tooth width – 8,5 mm
number of teeth
GEAR WHEELS DIMENSIONS
Dimensions of gear
wheels on
the disc: diameter – 79 mm tooth height – 26 mm tooth width – 8 mm number of teeth
SYSTEM
Standard equipment of each disc in every mower
Key between a gear wheel and drive shaft absorbs forces generated during impact or when a disc is blocked protects the cutterbar from heavy damages
Reusable after key replacement
KNIFE HOLDER PIN
Special shape prevents loosing knife during work
What is more, the pin is a separate and replaceable element in the cutterbar
As a result, if it is worn out, there is no need to replace any other parts
CUTTERBAR BOTTOM
Specially shaped skids in combination with wear plates create „passage” on the bottom of the cutterbar
This keeps dirt separate from the mowed material
CUTTERBAR BOTTOM PROTECTION
The bottom of the PerfectCUT cutterbar is protected by both sliding skids and wear plates offered as standard equipment
The bottom of the cutterbar is completely covered and 100% protected
CUTTERBAR BOTTOM PROTECTION
Sliding skid
Cutterbar bottom
„300%” OF CUTTERBAR PROTECTION
„300%” OF CUTTERBAR PROTECTION
100% due to coverage of the cutterbar bottom by sliding skids additional, standard wear plates