FarmMax Silage Grabs
• Heavy-duty hydraulic cylinders
• 1.8 metre • Euro hitch • Made in Europe
FarmMax Log Grabs
• Euro-hitch • Width 1200mm
• Lifting capacity 1300kg
FarmMax Pallet Forks
• Adjustable forks • Euro hitch
• Heavy duty 2000kg load rating
• Euro Hitch
• 3-in-1 a Shear Grab, Bucket Grab and a Bale Cutter
• Made in Europe FarmMax
• Grabbing, scooping, levelling and spreading
• Euro Hitch • Width 1850mm • Made in Europe
Standard Equipment
• 3-Point Linkage Cat. 1 & 2 on double sliding tubes
• Mechanical side shift
• Gearbox 540 rpm with overrun clutch
• Spherical roller bearings on rotor
• Double skin with strong side panels
• Rear hood - Rear roller
• Adjustable reinforced rear roller with scraper
• Reinforced front protection flaps
• Automatic belt tensioner
• Double front protection chains
• Wide skids
• 1.8m/2.2m Hammer-flails (in-stock)
• 2.5m/3.0m Y-flails (in-stock)
Features:
• Easy to operate, GPS calibrated
• Adjustable seed flow
• On/off switch on Plough Arms
• Quick change seed roller for rates and seed size
• Easy collaboration
• Large fans for even distribution
• Easily mounted on a wide range of machine
does not include fitting to machine.
FARMGUARD 2.4m CONTRACTOR BLADE
• Tractors from 70 - 130HP
• Manganese hardened steel cutting edge
• 85% of total weight on cutting edge
• Full three way adjustment (manual or hydraulic)
• Reversible cutting edge
• 2 hydraulic rams
2.4m WAS $15,995.00 N0W $13,995.00+GST
• Provides an accurate and consistent spread pattern
• Majority stainless in back-end, extends longevity of gear
• Strong, corrosion resistant coating protection and easy clean bin
• Quick and simple rate setting by rear door adjustment
• Mudguards protect chassis and running gear, less cleaning required
*6 Tonne landing soon! Includes roll top cover, internal mesh, lights & flags, stainless steel hydraulic hose fittings, mudguards and remote axle greasing.
SAM Fertiliser Spreader
USED SAM SPREADERS
Used 4T SAM Spreader
- 18-FERSPR148
• 4T Sam
• New Spinner Shaft
• Plastic Hopper
• Workshop Checked- Working Order
• 2007
• Rear belt sprockets near new, fronts need replacing
• 1 new left hand side rear spinner, bearings ok in right hand side.
• New road chain
• New outer rear deflectors
• Wheel bearings need replacing
$21,000.00+GST
Used 4.75 SAM Spreader
18-FERSPR152
• 4.75 tonne sam
• 2003
• New back spinners and deflectors
• Swivel tow eye
• Jack stand
• Steel hooper has plenty of rust.
• Use it until it dies (cost effective) or sand blast and refurbish
FarmShop have streamlined the sales process by inspecting used gear virtually (via smartphones).
Removing the need for a physical visit from us means we can offer this service regardless of where you are located.
Ready to try? Follow these 3 easy steps:
1) Take 5 - 10 photos of your Machine you want to trade
2) Supply Details of your Machine
3) Text your photos to 021 242 9368 and we will give you a value within 2 hours - easy... We pay top value for trades! WE VALUE TRADES WITHIN 2 HOURS!
HERBST TRAILERS IN-STOCK
Herbst Loader Transport Trailers
19 and 21 Tonne In-Stock - Ideal for carting diggers, tractors, bales and much more!
PAYLOAD 14,900KG / 19TONNE 16,000KG / 21TONNE
Standard features:
• LED Lights
• Mudguards Front and Rear
• Heavy Duty Ramps – plated with Gripper Bars
• Parking Brake
• Bucket Well in Beavertail
• Quick Hitch Stand – Removable
Other features:
• Sprung Drawbar
• Towing eye Type - Standard Ring / Adjustable Axles - 8 Stud 50KPH (300 x 90)
• 7 Leaf Spring Suspension
• Wheels - 215/75 17.5
• Braking System – Hydraulic (All Wheel Braking)
• Timber Floor
• Hydraulic Assisted Ramps
• Toolbox – Side
• Standard 8” x 5” I-Beam Chassis
PEECON TOPLINER EX DEMO 18M 3 NOW
A great return on investment and the ideal way to increase production from your herd. Peecon mixer wagons are made in the Netherlands, have a unique tub design which helps stop feed from ‘boiling over’ and their double action augers result in seriously quick mixing times.
Feed out from both sides
Unique double action augers
Patented future tub design
Hydraulic side conveyor
Multiple sizes available
Simple to use software