FS : SMZ AgTrader Fieldays June '26

• Ideal for gripping, lifting, & moving various materials

•Euro Hitch • 12mm thick steel tines

•Made with High Strength Steel

•HS steel frame with powder coat finish.

•Heavy-duty hydraulic cylinders.

•Solid bucket bottom • Replaceable prongs.

•Opening height: 1350mm

FarmMax SmartGrabs

• Opens to 1.7m wide

• Euro-hitch

• Carr y round bales

• Heavy duty

FarmMax Log Grabs

• Euro-hitch • Heavy duty •1200mm wide

FarmMax Pallet Forks

• Adjustable forks • Euro-hitch • Heavy duty

• 2000kg load rating • Option to add tines

• 1.3 tonne capacity • Available in 2 sizes FarmMax HawkBill Bucket 2.0m • Built to last, HS steel, solid bottom • Heavy-duty hydraulics.

• Fits your gear – Euro Hitch, made in Europe

• 6m folding - Strong HS high-strength steel

• Break up hard crusted ground & level out rough patches

• Add an AirSeeder for one-pass renovation and seeding

• Capacity: 0.55m3 • Euro hitch

• Made of high-strength steel • 1.8m wide

• 3m

double-bevelled blade • Cuts, levels & contours in one pass • Cost-effective alternative to a scoop

• With Arrow End

• Locks into the ground

• 1.2m length

• 10mm diameter

• Tread in

✓ Hot-dipped galvanised

✓ 1.1 metre high

✓ 33.4mm Pipe

✓ 8mm cross bars

✓ 25mm x 3mm Uprights

• Heavy Duty

•Tread in foot

958mm high

• Ideal for portable fencing

• Generous insulation length

• NOW Hot dipped Galvanised for longer life

Insulators

• Easy to install with pigtail standard

• Tough, weatherproof insulator built to last.

Compression

superior strength

• 6 × 0.2 mm stainless

•120 kg breaking strength

• Non-twisting / UV-stabilised

• Made in Europe

NZ Maxi Claw Insulators

14-CLIMAXNZ

• NZ made

• 100 Pack>

Sprung Handle 3mm

• Keeps wires secureno sag, no fuss. • Insulated gate handle

Heavy Duty

Compression Sprung

• For wide tape

• 25 Pack>

Gate Handle Standard

• Insulated gate handle • Heavy

Lift production with a Peecon

Peecon Topliner - Twin Future

Twin auger - Power

Meets

Precision

• Vertical feed mixer with 2 powerful augers

• Extra strong – 8mm tub & 25mm thick floor

• Patented mixing tub = no boil overs!

• Simple to use software

• Double Action Augers = fast, uniform mix

• Low power requirements = less diesel

• Conveyor on one side, chute on the other

• Can feed from both sides

• 18m3 and 21m3 available

Key Specs:

• Number of augers: 2

• Loading capacity: 18m3 - 6400 kg / 21m3 - 7600kg

• Required power: 18m3 - 70hp

21m3 - 80hp

FIELDAYS DEALS ‘26

FarmShop’s AI for farm machinery Ask. Get answers. Keep Working.

An industry first for NZ agriculture, FarmShop introduces FarmFix, an AI-powered support assistant delivering instant, cited answers for SaMASZ machinery direct from operator manuals, parts catalogues and FarmShop technical knowledge, right from your phone in the paddock. See FarmFix live in the Innovation Hub at Fieldays. Visit us at Site IN43 and discover how AI is helping keep NZ farmers and contractors working.

1. Planetary Drive

• Large gears = lower RPM, less wear, fuel use, and noise

• Idler gears drive only one disc

• Big cog to small cog = less HP required

2. 3 Layers of protection

• Sliding skids and wear plates provide full cutterbar protection

• Bottom fully covered for 100%

3. Quick change modules

• Quick-change modules absorb shock to protect the cutterbar

• Reusable - just replace the $4 shear key only

▶ Northland: FarmShop | Harrison Wearmouth | 021 240 9210

▶ North Waikato: FarmShop | Harrison Wearmouth | 021 240 9210

▶ South Waikato: Valley Agri | Jason Bain | 021 331 237

▶ Bay of Plenty: R&R Tractors | Bob Ogle | 021 902 610

▶ Gisborne: Advance Tech | Mike Longly | 021 311 067

▶ Taranaki: Brandt Stratford | 06 765 5690

▶ Manawatu: C & M Metalworx | Caleb Couper | 021 0255 0193

▶ Wairarapa: Van Diesel Services Ltd | Gareth van Dalen | 027 742 7384

▶ Tasman: McKay Mechanical | Dan McKay | 027 299 993

▶ Nth Canterbury: Ratpick Engineering | Pat Van De Pol | 021 146 6899

▶ West Coast: O’Connor Ag Ltd | Chris O’Connor | 027 817 2060

▶ Canterbury: Ratpick Engineering | Pat Van De Pol | 021 146 6899

▶ Mid Canterbury: All Farm Engineering | Robert Wilson | 027 249 1767

▶ Otago: Ag & Auto Direct | Paul Goatley | 027 432 7832

▶ Southland: Thornlie Park Ltd | Charlie Milne | 027 573 9544