INDENT & SAVE
2022
INDENTS Maximising farm yields & reducing downtime
FINANCE
Available*
FARMSHOP
DIRECT IMPORTS
ORDER NOW FOR SPRING 2022 DELIVERY Feb March
Oct/Nov Delivery Nov/Dec Delivery
Indent Order for 20%+ savings across imported range
*FREE! SmartGrabs
With every indent order over $20,000 placed before March 31st 2022. • Made in Europe - Euro Hitch • Move 1000’s of bales a year
CLICK THE CODE TO SEE IN ACTION
David O’Neill Contracting Ltd based out of Omarama covers a vast area from Tekapo to the Lindis Pass down to Kurow and up the Haka Valley. (Valued at $2,995.00) * While stocks last - applies to indent orders over $20,000 ex GST
We have 3 sets of SaMASZ Triple Mower Conditioners 1 x 8.6m and 2 x 9.4m cutting up to 2500 - 3000 hectares each. Great mowers and first choice for my next replacement. David O’Neill Contracting - Omarama
Maximise farm yields
Maximising farm yields & reducing downtime / sales@farmshop.co.nz / 0800 00 22 09 / www.farmshop.co.nz
1
SAVE 20% WITH 2022 INDENTS
FARMSHOP
FINANCE
DIRECT IMPORTS
Available*
5 Reasons to choose a SaMASZ mower... 1
3
2 Eliminate Striping: 13.8mm overlap = No striping and self cleaning
SaMASZ 2 Year Warranty:
YEAR
PerfectCUT cutterbar Wide CutterBar = Superior strength and superior contour following
5
Disc module with SafeGear system: Quickchange modules and blades = Zero downtime
ANTY
If you are looking for a mower with a wide cutter bar that can handle the stones, irrigation pivot ruts and uneven ground, with the benefit of a 2 year WARR Warranty then look no further than SaMASZ!
4
Superior Stone Protection: Triple cog engagement + Keyway breakaway = Superior strength and next level stone protection
360˚
SaMASZ Trailed Disc Mowers KDC 300, KDC 340, KDC 390, KDC 430, KDC 300 S/SL, KDC 301W, KDC 340 S/SL, KDC 341W The Samasz design of trailed mowers with central drawbar allows working on both sides of the tractor. It helps to save time when taking turns. KDC mowers can be additionally equipped with tine or roller conditioner and belt conveyor for swath transportation. Wide-angle PTO shaft Wide-angle 960 Nm PTO shaft, if greased every 8 hours, has a warranty for 1000 man-hours !
Adjustable rigging screws Regulate angle and working height of the transporter.
SCAN THE CODE TO SEE IT IN ACTION
Driveshaft Driveshaft inside the drawbar is with no doubt an innovative solution, which has a great effect on extending its life.
Suspension Wide frame rocker provides stable cutterbar operation. KDC 300 S / SL
TECHNICAL DETAILS
KDC 301 W
Working width [m / ft]
2
KDC 340 S / SL
KDC 341 W
3,00 / 9’10”
3,40 / /11’2”
Transport width [m / ft]
3,00 / /9’10”
3,40 / /11’2”
Swath width [m / ft]
1,00 - 1,60 / 2’11”- 5’3”
1,30 - 2,00 / /4’4”-6’7”
Working capacity [ha/h / ac/h]
~ 3,50 / ~ 8,70
~ 4,00 / ~ 10,00
Number of discs [pcs.] Number of knives [pcs.]
7 / 14
8 / 16
Power demand [HP]
from 90
from 110
Weight [kg / lbs]
1910 / 2350
2100 / 2500
2095 / 2495
2280 / 2680
RRP (EX GST)
$62,187.00
$68,918.20
$65,312.00
$72,187.00
INDENT (EX GST)
$54,725.00
$60,472.50
$57,475.00
$63,525.00
Maximising farm yields & reducing downtime / sales@farmshop.co.nz / 0800 00 22 09 / www.farmshop.co.nz
Promotion Valid 1 Jan - 31 March 2022. Subject to Farmshop Terms & Conditions. Prices exclude GST. Information is correct at time of printing. While stocks last.
FINANCE
Available*
SAVE 20% WITH 2022 INDENTS
FARMSHOP
DIRECT IMPORTS
Belt Driven Rear Disc Mowers
KDT 220, 260, 300, 340, 341 KDT is the most frequently purchased range from SaMASZ offer.
SCAN THE CODE TO SEE IT IN ACTION
TECHNICAL DETAILS
KDT 220
KDT 260
KDT 300
KDT 340
KDT 341*
Working width [m / ft]
2,20 / 7’2”
2,60 / 8’7”
3,00 / 9’10”
3,40 / 11’2”
3,40 / 11’2”
2,60 / 8’7”
2,15 / 2,85 7’1’’/9’4’’ 1,00 - 1,40 / 3’4” - 4’7”
2,15 / 3,40 7’1’’/11’2’’ 1,20 - 1,80 / 3’11” - 5’11”
2,15 / 3,75 7’1’’/12’3’’ 1,30 - 1,90 / 4’4” / 6’3”
2,20 / 4,20 7’2’’/13’8’’ 1,40 - 2,00 / 4’7” - 6’7”
2,20 / 4,20 7’2’’/13’8’’ 2,30 - 2,80 / 7’7’’-9’2’’
2,15 / 3,40 7’1’’/11’2’’ 1,00 - 1,30 / 3’4” - 4’4”
Working capacity [ha/h / ac/h]
~ 2,50 / ~ 6,20
~ 3,00 / ~ 7,40
~ 3,50 / ~ 8,70
~ 4,00 / ~ 10,00
~ 4,00 / ~ 10,00
~ 2,80 / ~ 7,00
Number of discs [pcs.] / Number of knives [pcs.]
5 / 10
6 / 12
7 / 14
8 / 16
8 / 16
6 / 12
from 90
Transport width / height [m / ft] Swath width [m / ft] Necessary hydraulic couplers
KDT 260 S Tine Conditioner Mower
1 x single acting
RPM
540
3-point hitch cat.
II
Power demand [HP]
from 50
from 70
from 80
from 90
from 90
Weight [kg / lbs]
670 / 1480
725 / 1600
785 / 1730
825 / 1820
825 / 1820
PTO shaft
995 / 2195 tractor - mower: with overrunning clutch built in: with overload clutch
tractor - mower: with overrunning clutch
Single rubber swath guide [pcs.]
2
1
-
-
2
Double rubber swath guide [pcs.]
-
1
2
2
-
RRP (EX GST)
$26,875.00
$28,125.00
$28,800.00
$31,200.00
$31,200.00
$35,400.00
$23,650.00 $24,750.00 $26,400.00 $28,600.00 $28,600.00
$32,450.00
Metal swath guides in conditioner
INDENT (EX GST)
Rear Direct Gear Driven Disc Mowers KT 261, KT 301, KT 341 Centre hung, contour following, direct gear driven, rear disc mowers TECHNICAL DETAILS
KT 261 S Conditioner Mower
KT 301 S Conditioner Mower
3,40 / 11’2”
2,60 / 8’7”
3,00 / 9’10”
2,00 / 4,20 6’7’’/13’8’’
2,00 / 3,10 6’7’’/10’2’’
2,00 / 3,50 6’7’’/11’6’’
1,50 - 1,90/ 4’11’’ - 6’4’’
1,90 - 2,30 / 6’4’’ - 7’7’’
KT 261
KT 301
Working width [m / ft]
2,60 / 8’7”
3,00 / 9’10”
Transport width / height [m / ft]
2,00 / 3,10 6’7’’/10’2’’
2,00 / 3,50 6’7’’/11’6’’
Swath width [m / ft]
1,50 - 1,90 / 4’11” - 6’4”
1,90 - 2,30 / 6’4’’ - 7’7’’
2,30 - 2,80 / 7’7’’ - 9’2’’
Necessary hydraulic couplers
KT 341*
Quick change blades on All Models
2 x single action + 1 x double action
Working capacity [ha/h / ac/h]
~ 2,80 / ~ 7,00
~ 3,50 / ~ 8,70
~ 4,00 /~ 10,00
~ 2,80 / ~ 7,00
~ 3,50 / ~ 8,70
Number of discs [pcs.] / Number of knives [pcs.]
6 / 12
7 / 14
8 / 16
6 / 12
7 / 14
RPM
540 (1000 - option)
1000
3-point hitch cat.
II
Power demand [HP]
from 70
from 80
from 90
from 90
from 100
Weight [kg / lbs]
1000 / 2205
1060 / 2335
1130 / 2490
1300 / 2865
1350 / 2975
Weight with “H” [kg / lbs]
955 / 2105
1015 / 2235
1090 / 2405
1305 / 1250 1290 / 2845
1420 / 1310 3130 / 2890
PTO shaft
tractor - mower: with friction overrunning clutch, built in: no clutch
Single rubber swath guide [pcs.]
1
RRP (EX GST)
$26,500.00
INDENT (EX GST)
SCAN THE CODE TO SEE IT IN ACTION
2
$29,384.00
Metal swath guides in conditioner
$31,458.00
$37,926.00
$39,984.00
$22,907.00 $26,944.00 $27,488.00
$34,765.00
$36,652.00
Maximising farm yields & reducing downtime / sales@farmshop.co.nz / 0800 00 22 09 / www.farmshop.co.nz
Promotion Valid 1 Jan - 31 March 2022. Subject to Farmshop Terms & Conditions. Prices exclude GST. Information is correct at time of printing. While stocks last.
3
FINANCE
Available*
SAVE 20% WITH 2022 INDENTS
FARMSHOP
DIRECT IMPORTS
Front Contour Following Disc Mower KDF 260, KDF 300, KDF 340 Good alternative to rear mowers due to good visibility during operation and transport. Extended frame and coil springs of long travel enable very good ground following and proper ground pressure. Can be successfully combined, with rear unit, making a very economic set. TECHNICAL DETAILS
KDF 260
KDF 300
KDF 340
Working width [m / ft]
2,60 / 8’7”
3,00 / 9’10”
3,40 / 11’2”
Transport width [m / ft]
2,60 / 8’7”
3,00 / 9’10”
3,40 / 11’2”
Swath width [m / ft]
~ 01,00 -1,20 / ~ 2’11” - 3’7”
~ 1,30 - 1,50 / ~ 4’4” - 4’11”
~ 1,40 -1,80 / 5’11”
Necessary hydraulic couplers
SCAN THE CODE TO SEE IT IN ACTION
1 x single acting
Working capacity [ha/h / ac/h]
~ 2,80 / 7,00
~ 3,50 / 8,70
~ 4,00/10,00
Number of discs [pcs.] / Number of knives [pcs.]
6 / 12
7 / 14
8 / 16
RPM
1000
3-point hitch cat.
II
Power demand [HP]
from 70
from 80
from 90
Weight [kg / lbs]
805 / 1775
940 / 2075
1020 / 2250
RRP (EX GST)
$27,200.00
$30,720.00
$34,440.00
INDENT (EX GST)
$25,025.00
$28,160.00
$31,480.00
Double Rear Mower Make it a triple... MegaCUT KDD 861, KDD 912, KDD 941 SCAN THE CODE TO SEE IT IN ACTION
Centre hung, contour following, gear driven MegaCUT is a set of mowers for farmers, who value their time and money. MegaCUT is a perfect solution for large farms and contractors. Thanks to their high productivity and working width, cutting of large areas does not take a great deal of time. TECHNICAL DETAILS
KDD 861
KDD 911
KDD 941
Working width [m / ft]
8,60 / 28’2”
9,10 / 29’10’’
9,40 / 30’10”
Transport width / height [m / ft]
3,00 / 3,80 // 9’8’’ / 12’8”
3,00 / 3,90 // 9’8’’ / 12’10’’
3,00 / 4,00 // 9’8’’ / 13’2’’
Swath width [m / ft]
2 x 1,90 - 2,30 / 2 x 6’3” - 7’7”
2 x 1,90 - 2,30 / 2 x 6’3” - 7’7”
2 x 2,30 - 2,70 / 2 x 7’7” - 8’10”
Necessary hydraulic couplers
3 x single acting (with panel 1 x single acting)
Working capacity [ha/h / ac/h]
~ 10,00 / 25,00
~ 10,50 / 27,00
~ 11,00 / 27,00
Number of discs [pcs.] / Number of knives [pcs.]
14 / 28
16 / 32
16 / 32
RPM
1000
3-point hitch cat.
II / III
Power demand [HP]*
from 130
from 140
from 140
Weight [kg / lbs] - Weight with „H” [kg / lbs]
2125 / 4685 - 2100 / 4630
2290 / 5050 - 2190 / 4830
2290 / 5050 - 2190 / 4830
PTO shaft
4
tractor - mower: no clutch, built-in: with friction overrunning clutch
RRP (EX GST)
$65,970.00
$71,970.00
$71,400.00
INDENT (EX GST)
$60,482.50
$65,972.00
$65,450.00
Maximising farm yields & reducing downtime / sales@farmshop.co.nz / 0800 00 22 09 / www.farmshop.co.nz
Promotion Valid 1 Jan - 31 March 2022. Subject to Farmshop Terms & Conditions. Prices exclude GST. Information is correct at time of printing. While stocks last.
FINANCE
Available*
SAVE 20% WITH 2022 INDENTS
FARMSHOP
DIRECT IMPORTS
GigaCUT Set Conditioner Mowers KDD 861 S / ST, KDD 941 S / ST Designed to work on large farms in the toughest conditions possible. GigaCUT combination consists of double-sided mower KDD 861 S/ST or 941 S/ST and front mower KDF300 S/W or KDF 340 S/W + belt conveyors. Owing to tine or roller conditioner, use of tedder and rake is no longer necessary besides that is a perfect alternative to self-propelled mowers.
Warning plates with rear road lights • standard Belt conveyor • less drives • speed adjustment • no need of tedding and raking
Safety guard • lifted for easier maintenance • safety curtain • •
protects against stones resistant to weather conditions lifted side guard decreases transport height
Own hydraulic unit • for conveyor drive • for relieving tractor’s hydraulics
Close-up sensors • adjustable • provides easier working on headlands
Central suspension • work unit located in the center of •
gravity - even support across the whole cutterbar width, perfect ground following enabling work on uneven ground.
Ground pressure relief system • adjustable work unit support • •
high level of ground following, spring-type as standard, hydropneumatic type (option)
KENNFIX hydraulic connector 4 support legs • support legs enable parking of the •
machine in transport position saves space considerably
TECHNICAL DETAILS
SCAN THE CODE TO SEE IT IN ACTION
Hydraulic safety breakaway device • protection of mower against damage • if obstacle is hit the unit is retracted by 24° and at the same time lifted by approx. 50 cm / 1’ 8’’
KDD 861 S Conditioner Mower
KDD 941 S Conditioner Mower
Cutterbar
GROUPER AND CONDITIONER TECHNICAL DETAILS
KDD 861 ST
KDD 941 ST
Working width [m / ft]
8,60 / 28’2”
9,40 / 30’10”
Working width [m / ft]
8,60 / 28’2”
9,40 / 30’10”
Transport width / height [m / ft]
3,00 / 3,80 // 9’8’’ / 12’8”
3,00 / 3,95 // 9’8’’ / 13’
Transport width / height [m / ft]
3,00 / 3,80 // 9’8’’ / 12’8”
3,00 / 3,95 // 9’8’’ / 13’
Swath width [m / ft]
2 x 1,90 - 2,30 // 2 x 6’3” - 7’7”
2 x 2,30 - 2,70 // 2 x 7’7’’ - 8’1’’
Swath width [m / ft]
2 x 1,90 - 2,30 // 2 x 6’3” - 7’7”
2 x 2,30 - 2,70 // 2 x 7’7’’ - 8’1’’
3 x single acting (with panel 1 x single acting)
Necessary hydraulic couplers
Working capacity [ha/h / ac/h]
~ 10,00 / 25,00
~ 11,00 / 27,00
Working capacity [ha/h / ac/h]
~ 10,00 / 25,00
~ 11,00 / 27,00
Number of discs [pcs.] / Number of knives [pcs.]
14 / 28
16 / 32
Number of discs [pcs.] / Number of knives [pcs.]
14 / 28
16 / 32
Necessary hydraulic couplers
RPM
1000
3-point hitch cat.
III
RPM
1000
3-point hitch cat.
Power demand [HP]*
from 160
from 180
Weight [kg / lbs]
2920 / 2650 // 6440 / 5840
3120 / 2950 // 6880 / 6500
Weight with „H” [kg / lbs]
2785 / 2550 // 6140 / 5620
3020 / 2830 // 6660 / 6240
PTO shaft
2 x single acting
tractor - mower: no clutch, built-in: with overrunning friction clutch
RRP (EX GST)
$95,760.00
$101,400.00
INDENT (EX GST)
$87,780.00
$92,950.00
Optional extras: In cab control POA. Hydroneumatic suspension available on request.
Power demand [HP]*
III from 200
from 220
Weight [kg / lbs]
3850 / 8490
4250 / 9370
Weight with „H” [kg / lbs]
3650 / 8050
4050 / 8930
PTO shaft
tractor - mower: no clutch, built-in: with overrunning friction clutch
Rubber watch guide - single
Metal swath guides in conditioner
RRP (EX GST)
$135,995.00
$145,080.00
INDENT (EX GST)
$125,195.00
$135,080.00
*Hydroneumatic suspension available on request
Maximising farm yields & reducing downtime / sales@farmshop.co.nz / 0800 00 22 09 / www.farmshop.co.nz
Promotion Valid 1 Jan - 31 March 2022. Subject to Farmshop Terms & Conditions. Prices exclude GST. Information is correct at time of printing. While stocks last.
5
FINANCE
Available*
SAVE 20% WITH 2022 INDENTS
FARMSHOP
DIRECT IMPORTS
Rotary Tedders 4 - 12 metre available
SCAN THE CODE TO SEE IT IN ACTION
TECHNICAL DETAILS
P4 - 471
P4 - 531
P6 - 651
P6 - 771
Working width [m / ft]
4,70 / 15’5”
5,30 / 17’5”
7,00 / 21’4”
7,70 / 25’3”
Transport width / height [m / ft]
3,00 / 2,50 // 9’8’’ / 8’2’’
3,00 / 2,70 // 9’8’’ / 8’1’’
3,00 / 3,60 // 9’8’’ / 11’8”
Number of rotors [pcs.]
4
Necessary hydraulic couplers
1 x single acting
Working capacity [ha/h / ac/h]
2,95 / 4,00 // 9’7’’ / 13’2’’ 6
~ 5,60 / 13,85
1 x double acting
~ 6,30 / 15,55
Number of arms [pcs.]
~ 7,80 / 19,30
~9,20 / 23
160 / 5’3’’
172 / 5’8”
from 50
from 60
915 / 2020
945 / 2080
6
Rotor diameter [cm / ft]
162 / 5’4”
172 / 5’8”
RPM
540
3-point hitch cat.
II
Power demand [HP]
from 30
from 40
Tires (with inner tubes)
16 x 6,5-8
Weight [kg / lbs]
665 / 1470
680 / 1500
PTO shaft
tractor - tedder: with friction clutch
RRP (EX GST)
$19,500.00
$22,220.00
$29,400.00
$31,800.00
INDENT (EX GST)
$16,250.00
$18,580.00
$24,500.00
$26,500.00
Single Rotor Rake Z-470
Double Rotor Rake Z2-840
TECHNICAL DETAILS
Z - 470
TECHNICAL DETAILS
Z 2 - 840
Working width [m / ft] Windrow width [m / ft] Transport width [m / ft] Transport width without arms [m / ft] Working capacity [ha/h / ac/h] Number of arms [pcs.] Rotor diameter with arms [m / ft] Number of tines [pcs./arm] RPM* 3-point hitch cat. Power demand [HP] Tires (with inner tubes) Weight [kg / lbs] PTO shaft
4,70 / 15’5”
Working width [m / ft]
7,60 – 8,40 / 24’11’’-27’7’’
3,80 / 12’8” 2,30 / 7’7” ~ 5,60 / 14,00 13 3,80 / 12’8” 4 II from 50 820 / 1810
RRP (EX GST)
$23,070.00
INDENT (EX GST)
$19,225.00
SCAN THE CODE TO SEE IT IN ACTION
Windrow width [m / ft]
1,20 - 2,00 / 3’11’’-6’7’’
Transport width / height [m / ft]
3,00 / 3,75 // 9’8”/ 12’3’’
Working capacity [ha/h / ac/h]
~ 9,00 / 22,00
Number of arms per rotor [pcs.] Number of dismountable arms per rotor for transport pcs.] RPM*
11 4 540
Power demand [HP]
from 80
Tires (with inner tubes)
16 x 6,5 - 8 / 340/55-16
Weight [kg / lbs]
2330 / 5130
RRP (EX GST)
$61,800.00
INDENT (EX GST)
$54,300.00
SCAN THE CODE TO SEE IT IN ACTION
Basket Rake TWIST 600 RAKE AND BALE - SAVE TIME TWIST 600 is a center delivery rake designed for a fast, efficient and clean raking of forage. It can be mounted to the front or rear of the tractor. With front mounting, you can simultaneously rake and work, e.g. with a baler. The rake consists of two working systems driven by tractor’s hydraulics using hydraulic motors. The machine does not need the tractor’s PTO shaft for operation. The rake has low weight in comparison to its extensive working width.
6
TECHNICAL DETAILS
TWIST 600
Working width [m / ft]
6,00 / 19’ 9’’
Windrow width [m / ft]
1,30 / 4’ 4’’
Transport width [m / ft]
2,35 / 7’7’’
Transport height [m / ft]
3,50 / 11’5”
Necessary hydraulic couplers
2 x double acting
Working capacity [ha/h / ac/h]
6,00 / 15,00
Working drums [pcs.]
2
Raking bar [pcs.]
5
Number of tines [pcs.]
18
Tires (with inner tubes) [pcs.]
15x6,5
Drive type
Hydraulic
Pump capacity [l/min]
30 / 7
Nominal pressure [bar / MPa]
160 / 16
Weight [kg / lbs]
770 / 1700
RRP (EX GST)
$37,000.00
RRP (EX GST)
$31,000.00
SCAN THE CODE TO SEE IT IN ACTION
Maximising farm yields & reducing downtime / sales@farmshop.co.nz / 0800 00 22 09 / www.farmshop.co.nz
Promotion Valid 1 Jan - 31 March 2022. Subject to Farmshop Terms & Conditions. Prices exclude GST. Information is correct at time of printing. While stocks last.
Maximising farm yields & reducing downtime Free Call: 0800 00 22 09 Email: sales@farmshop.co.nz Post: PO Box 28, Maungaturoto 0547 Shop: Corner Jervois and Grey Streets, Dargaville www.farmshop.co.nz
Terms & Conditions: 1. All invoices are to be paid on or before the 20th of the month following invoice date unless by prior agreement. 2. Claims arising from invoices must be made within 7 working days. 3. At FarmShop 2017 Ltd.’s sole discretion, a deposit may be required. 4. All overdue invoices bear interest at 2.5% per month on unpaid balance. 5. In the event of default of payment when due, all costs of collection, including interest, legal fees and court costs, shall be paid by the applicant. 6. GST and other taxes and duties that may be applicable shall be added to the price except when they are expressly including in the price. 7. Any credit extended to the applicant may be reduced or eliminated in the event Farmshop 2017 Ltd, in its reasonable discretion, determines that the applicant’s financial situation or ability to pay is impaired. 8. The use of Farmshop 2017 Ltd products being beyond the control of the manufacturer, no warranty expressed or implied is given by Farmshop 2017 Ltd regarding its suitability, fitness or efficiency for any purpose for which it is used by the buyer, whether in accordance with the directions or not and Farmshop 2017 Ltd accepts no responsibility for any consequence whatsoever resulting from the use of its products. 9. Farmshop 2017 Ltd makes any recommendations in good faith. However, Farmshop 2017 Ltd makes no representations as to the comprehensiveness or accuracy of the information. It is expected that individuals receiving the information will exercise independent judgement in determining its appropriateness for a particular purpose. Accordingly, Farmshop 2017 Ltd will not be responsible for damages of any kind resulting from the use or reliance upon such information. The title of/in any goods supplied is reserved by Farmshop 2017 until receipt of full payment. Farmshop 2017 have the right under the Wages protection and Contractors Liens Repeal Act 1987 to retain possession of goods until charges are paid. Farmshop 2017 are entitled (for themselves or through any agent or employee) to come on to any land where the goods are stored or installed to uplift and remove any goods supplied and to sell those goods if necessary to recover unpaid monies. No Responsibility for any loss is accepted by Farmshop 2017 in this eventuality. Farmshop 2017 Ltd may also register title to all present and after acquired property including but not confined to goods supplied by Farmshop 2017 Ltd and itemised on a tax invoice, and/or services supplied to the customer and the proceeds from those goods supplied in whatever form they may be in against (Customer) on the Personal Property Security Register (PPSR). Customers will waive the right to receive a copy of the PPSR verification statement. Payments will be allocated to labour components of invoices first. All information stated in the brochure is correct at time of printing and subject to change without notice. All prices may vary depending on product specifications. All prices subject to GST.