June July 2016 Newsletter

June-July 2016

howardsROLLERcams ROCKERS Unique full body design offers less flex and will withstand 900+ lbs. of spring pressure at over .900 lift. 100% CNC machined. Lightweight for maximum performance.

Designed for more retainer and spring clearance than most other manufacturers. They feature needle bearing fulcrums and roller tips, centerless ground trunnions, centerless ground pins and rollers and include thick walled adjusting nuts. Micropolished surface finish for maximum durability. Purple anodized for additional protection. Available in most popular ratios. Unconditional Lifetime Warranty to the original purchaser (with proof of purchase) for life! Made in the USA.

®

HOWARDS BILLET ALLOY ROLLER ROCKER SET SMALL BLOCK CHEV 1.6 3/8 HOWARDS BILLET ALLOY ROLLER ROCKER SET SMALL BLOCK CHEV 1.5 7/16 HOWARDS BILLET ALLOY ROLLER ROCKER SET SMALL BLOCK CHEV 1.6 7/16 HOWARDS BILLET ALLOY ROLLER ROCKER SET SMALL BLOCK CHEV 1.6 3/8 S/ALIGN HOWARDS BILLET ALLOY ROLLER ROCKER SET SMALL BLOCK CHEV 1.65 7/16

HC-90071 HC-90072 HC-90073 HC-90085 HC-90087

$CALL $CALL $CALL $CALL $CALL

HOWARDS BILLET ALLOY ROLLER ROCKER SET BIG BLOCK CHEV 1.7 7/16 HOWARDS BILLET ALLOY ROLLER ROCKER SET BIG BLOCK CHEV 1.8 7/16

HC-90075 HC-90079

$CALL $CALL

HOWARDS BILLET ALLOY ROLLER ROCKER SET SMALL BLOCK FORD W 1.6 7/16 HOWARDS BILLET ALLOY ROLLER ROCKER SET SMALL BLOCK FORD W 1.72 7/16 HOWARDS BILLET ALLOY ROLLER ROCKER FORD CLEVELAND 1.73 7/16

HC-90081 HC-90082 HC-90083F

$CALL $CALL $CALL

HOWARDS BILLET ALLOY ROLLER ROCKER SET HOLDEN V8 253 304 308 1.6 7/16

HC-90090

$CALL

HOWARDS BILLET ALLOY ROLLER ROCKER SET LS L92 LS3 OFFSET 1.7 RATIO HOWARDS BILLET ALLOY ROLLER ROCKER SET LS L92 LS3 OFFSET 1.8 RATIO HOWARDS BILLET ALLOY ROLLER ROCKER SET LS1 LS2 LS6 NO OFFSET 1.7 RATIO HOWARDS BILLET ALLOY ROLLER ROCKER SET LS1 LS2 LS6 NO OFFSET 1.8 RATIO

HC-90095 HC-90096 HC-90097 HC-90098

$CALL $CALL $CALL $CALL

All prices are quoted ex warehouse & subject to GST and are correct at time of printing. Prices valid to current account customers only, on a first come first served basis and on current stock only (No backorders) Prices will return to normal once current stock is soldout.

All purchases are subject to our Trading Terms & are available at fabre.com.au/tradingterms/

fabre.com.au / facebook.com/fabre.australia

Ford Kent Lotus Blocks

&

The legendary Formula Ford Kent block is reborn with an all The Lotus block features an all new grey iron casting that new iron casting that is stronger than the original! The block is stronger than the original and accepts the Lotus cylinder was designed to replace production 1.6L Kent blocks for head.

SCCA Formula Ford competition.

• • • • • • • • •

Std 8.200" deck height with extra material for decking Cylinder bores semi-finished to 3.185" - 3.187" diameter to allow the engine to be built to desired clearances Max bore size is 3.226-inch / 81.94mm Lifter bore diameter: .5155" - .5145" Block cast from 40,000 PSI grey iron Lower clutch housing bolt bosses reinforced Select areas around main bearing webs strengthened Center main will accept upper and lower crankshaft thrust bearing inserts Includes cam bearings (Installed)

Ford Kent 1.6ltr. 1600 Engine Block JHS-M-6010-16K

$call

Ford 5.4L 32V Modular Complete Timing Kit

$call

Ford 5.4 Timing Kit RAMFLO ELEMENT OVAL RAMFLO ELEMENT ROUND RAMFLO FILTER 40mm NECK RAMFLO FILTER 50mm NECK RAMFLO FILTER 66mm NECK RAMFLO FILTER CD150 RAMFLO FILTER CD175 RAMFLO FILTER DCOE 38 40 42 WEBER RAMFLO FILTER DCOE 45 48 WEBER RAMFLO FILTER SU H1 RAMFLO FILTER SU H2 HS2

KC014 KC013 RF306S RF328S RF312S RF319S RF352S RF440S RF445S RF301S RF302S

$CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL

• • • • • • • • •

Std 7.800" deck height with extra material for decking Machined and delivered with cylinder bores semifinished at 3.228 - 3.226" (81.99 - 81.94mm) diameters Block is designed for standard bore engine builds Lifter bore diameter: .5155" - .5145" Block cast from 40,000 PSI grey iron Lower clutch housing bolt bosses reinforced Select areas around main bearing webs strengthened Center main will accept upper and lower crankshaft thrust bearing inserts Includes cam bearings (Installed)

Ford Lotus 1.6ltr 7.9" Deck Engine Block

$call JHS-M-6010-16L

RAMFLO FILTER SU H2 HS2 OFFSET RF302P5S $CALL RAMFLO FILTER SU H4 HD4 HS4 HIF4 RF303S $CALL RAMFLO FILTER SU H4 HD4 HS4 HIF4 OFFSET RF303P5S $CALL RAMFLO FILTER SU H6 HD6 HS6 RF304S $CALL RAMFLO FILTER SU H6 HD6 HS6 OFFSET RF304P5S $CALL RAMFLO FILTER SU H6 HD6 HS6 OVAL RF404S $CALL RAMFLO FILTER SU H8 HD8 HS8 RF305S $CALL RAMFLO FILTER SU H8 HD8 HS8 OFFSET RF305P5S $CALL RAMFLO FILTER SU H8 HD8 HS8 OVAL RF405S $CALL RAMFLO FILTER ALL SU HIF6 RF356S $CALL PRICES IN THIS NEWSLETTER ARE SUBJECT TO GST RAMFLO FILTER SU HIF6 OFFSET RF356P5S $CALL

howardsValvecams Springs Howards Cams research and development engineers are constantly updating materials and manufacturing techniques to provide the best possible valve springs. Coiled and heat-treated in the finest facilities available. Each spring is coiled, stress relieved, deburred, shot-peened and heat treated to Howards Cams own very specific standards. Sets of 16.

HOWARDS VALVE SPRING SET (16) SINGLE WITH DAMPER 1.215” OD 90@1.700” HOWARDS VALVE SPRING SET (16) SINGLE WITH DAMPER 1.250” OD 115@1.700” HOWARDS VALVE SPRING SET (16) SINGLE WITH DAMPER 1.265” OD 125@1.750” HOWARDS VALVE SPRING SET (16) SINGLE WITH DAMPER 1.437” OD 100@1.750” HOWARDS VALVE SPRING SET (16) SINGLE WITH DAMPER 1.437” OD 110@1.750” HOWARDS VALVE SPRING SET (16) DUAL 1.440” OD 145@1.880” HOWARDS VALVE SPRING SET (16) SINGLE WITH DAMPER 1.485” OD 115@1.800” HOWARDS VALVE SPRING SET (16) DUAL 1.500” OD 180@1.800” HOWARDS VALVE SPRING SET (16) DUAL 1.437” OD 145@1.750” POLISHED HOWARDS VALVE SPRING SET (16) SINGLE WITH DAMPER 1.525” OD 125@1.875” HOWARDS VALVE SPRING SET (16) DUAL WITH DAMPER 1.514” OD 130@1.875” HOWARDS VALVE SPRING SET (16) DUAL WITH DAMPER 1.539” OD 140@1.940” HOWARDS VALVE SPRING SET (16) DUAL 1.514” OD 145@1.900” HOWARDS VALVE SPRING SET (16) BEEHIVE 1.280” OD 115lb@1.800” HOWARDS VALVE SPRING SET (16) DUAL WITH DAMPER 1.557” OD 225@1.950” HOWARDS VALVE SPRING SET (16) CHEV HOLDEN LS BEEHIVE 1.290” OD 130lb@1.800” HOWARDS VALVE SPRING SET (16) CHEV HOLDEN LS1 DUAL 1.305” O.D. 152@1.800” HOWARDS VALVE SPRING SET (16) DUAL 1.550” OD 225@1.850” HOWARDS VALVE SPRING SET (16) DUAL 1.550” OD 250@2.000”

howards Timing cams Kits

These pro billet competition timing sets are designed for accuracy and long life. Lightweight by design these sets feature a CNC machined billet steel cam sprocket with lightening holes, a heat-treated crank sprocket with 9-keyways and a black oxide coating. The chain is a large .250 diameter seamless roller. Most sets include a press fit roller thrust bearing. Note: No machining required.

® HC-98111 HC-98214 HC-98212 HC-98411 HC-98415 HC-98443 HC-98511 HC-98541 HC-98447 HC-98529 HC-98636 HC-98632 HC-98512 HC-98114 HC-98635 HC-98110 HC-98118 HC-98645 HC-98825

$CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL

®

HOWARDS BILLET DOUBLE ROW 9 KEYWAY TIMING SET SBC HC-94300 $CALL HOWARDS BILLET DOUBLE ROW 9 KEYWAY TIMING SET SBC ROCKET BLOCK HC-94302 $CALL HOWARDS BILLET DOUBLE ROW 9 KEYWAY TIMING SET BBC GEN VI HC-94309 $CALL HOWARDS BILLET DOUBLE ROW 9 KEYWAY TIMING SET BBC -.010” UNDERSIZE HC-94305-10 $CALL HOWARDS BILLET DOUBLE ROW 9 KEYWAY TIMING SET LS2 SINGLE BOLT CAM HC-94304 $CALL HOWARDS BILLET DOUBLE ROW 9 KEYWAY TIMING SET LS3 THREE BOLT CAM HC-94307 $CALL HOWARDS BILLET DOUBLE ROW 9 KEYWAY TIMING SET LS1 LS6 THREE BOLT CAM HC-94308 $CALL HOWARDS BILLET DOUBLE ROW 9 KEYWAY TIMING SET SB FORD 1 PIECE ECCENTRIC HC-94310 $CALL HOWARDS BILLET DOUBLE ROW 9 KEYWAY TIMING SET SB FORD 2 PIECE ECCENTRIC HC-94312 $CALL HOWARDS BILLET DOUBLE ROW 9 KEYWAY TIMING SET SB FORD 2 Pc ECC -.005” UNDER HC-94312-5 $CALL HOWARDS BILLET DOUBLE ROW 9 KEYWAY TIMING SET SB CHRYSLER HC-94330 $CALL ALL PRICES IN THIS NEWSLETTER ARE SUBJECT TO GST HOWARDS BILLET DOUBLE ROW 9 KEYWAY TIMING SET BB CHRYSLER 3 BOLT HC-94340 $CALL

howards cams

®

Howards Cams retrofit hydraulic roller camshafts offer more lift and more power for less money. These street performance grinds are perfect for those wanting to upgrade to hydraulic roller cams. Manufactured using the highest grade race-quality cores, Howards precision-grinds their cams to provide the quality and performance that you want at a reasonable price. Overhaul your valvetrain for mild to wild street performance with Howards Cams retrofit hydraulic roller camshafts.

Duration @ .050” / Lift With Std. Ratio Rockers / Lob Sep. Cam Ford Big Block Hyd Roller 249/255 .652/.652 110° 3200-7000 Rough Idle, Hot Street/Bracket, Good Torque & Upper mid range. 11.5:1+ CR 3800+ stall Cam Ford Modular 4V Hyd Roller 236/242 .475/.475 114° 2000-7000 Pro Street/Strip with supercharger. Needs good parts all round. 2500+ stall Cam Ford Cleveland Hyd Roller 217/225 .571/.577 110° 1600-5600 Mild idle, great all around Street, good low end torque & horsepower.

Cam Ford Cleveland Hyd Roller 225/229 .576/.600 112° 2000-6000 Fair idle, Street High Performance, good low to mid range torque. 9.5:1+ CR, 2000+ stall.

Cam Ford Cleveland Hyd Roller 233/241 .594/.611 112° 2800-6400 Rough idle, Street/Bracket, good mid range torque & upper end horsepower. 3200+ stall.

Cam Ford Cleveland Hyd Roller 247/251 .623/.623 110° 3400-7000 Fair idle, Street/Strip, good mid range power.

11.5:1+ CR, 3500+ stall Cam Ford Windsor Hyd Roller 225/229 .533/.512 110° 2000-6100 Fair Idle, Street/Strip. Auto OK with 2500+ Stall.

Cam Ford Windsor Hyd Roller 227/233 .597/.597 112° 2200-6400 Good Idle,Good all round Performance, Good vacuum. 9.5:1 CR, 2500+ stall & gears Cam Ford Windsor Hyd Roller 231/231 .544/.544 108° 2400-6000 Choppy Idle, Strong Low & Mid Range Performance. 2500+ stall Cam Ford Windsor Hyd Roller 231/235 .544/.565 110° 2200-6000 Rough Idle, Street/Strip Performance Great Low to Mid Range Torque & Power Cam Ford Windsor Hyd Roller 235/241 .581/.581 112° 2400-6400 Lopey idel, Hot Street & Bracket Racing 10.0:1-up CR advised Cam Ford Windsor Hyd Roller 235/243 .565/.565 109° 2400-6100 Bid Daddy Rattler, Rough Idle. Pro Street or Street/ Strip. Needs 9.5:1 CR, 2800+ stall Cam Ford Windsor Hyd Roller 237/245 .597/.597 110° 2500-6500 Lopey Idle, Hot Street/Bracket, good Mid Range 9.5-10.5:1 CR advised Cam Ford Windsor Hyd Roller 241/247 .581/.603 110° 2600-6600 Rough Idle, Hot Street & Bracket Racing. 10.5:1 CR advised Cam Ford Windsor Hyd Roller 241/247 .581/.603 112° 2600-6600 Rough Idle, Hot Street & Bracket Racing. 10.5:1-up CR advised Cam Ford Windsor Hyd Roller 247/251 .576/.576 110° 2800-6700 Hot Street/Brackets. Requires aftermarket heads, 3500+ stall.

Cam Ford Windsor Hyd Roller 251/257 .592/.592 112° 3000-7000 Upper Mid Range & Top End Power.

Needs 11.0:1+ CR Cam Small Block Chrys Hyd Roller 219/225 .525/.525 110° 1600-5600 Good Idle, Performance Street, Good Low to Mid Range Torque. 9.0:1+CR, 2200+ stall Cam Small Block Chrys Hyd Roller 229/233 .520/.515 110° 2000-6000 Lopey Idle, Hot Street, Great Mid Range & Acceleration 9.5:1 CR, 1800+ stall Cam Small Block Chrys Hyd Roller 235/241 .530/.530 110° 2400-6300 Rough Idle, Street/Strip, Great Mid Range. 9.5:1+ CR, 2800+ stall & good Intake Cam Small Block Chrys Hyd Roller 241/247 .545/.550 110° 2800-6500 Rough Idle, Pro Street/Strip, Needs 10.0:1+ CR 2800+ stall at least 4.10 gears

HC-243545-10

$CALL

HC-276814-14

$1,CALL

HC-233215-10

$CALL

HC-230245-12

$CALL

HC-231175-12

$CALL

HC-230335-10

$CALL

HC-220245-10

$CALL

HC-220525-12

$CALL

HC-220305-08

$CALL

HC-220255-10

$CALL

HC-222735-12

$CALL

HC-228085-09

$CALL

HC-221815-10

$CALL

HC-220275-10

$CALL

HC-220275-12

$CALL

HC-220335-10

$CALL

HC-220355-12

$CALL

HC-713175-10

$CALL

HC-710525-10

$CALL

HC-712105-10

$CALL

HC-710665-10

$CALL

HYDRAULIC ROLLER

Cam Small Block Chev Hyd Roller 209/215 .465/.470 110° 1000-4400 Improved throttle response & low end torque.

Cam Small Block Chev Hyd Roller 227/233 .560/.560 112° 2300-6200 Good idle & vacuum. Good all around mid range performance. 2500+ stall Cam Small Block Chev Hyd Roller 233/241 .530/.545 110° 2400-5800 Rough idle, Hot Street & Bracket Racing. 10.0:1-up CR advised. 2800+ stall.

Cam Small Block Chev Hyd Roller 233/241 .530/.545 112° 2400-6000 Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.

Cam Small Block Chev Hyd Roller 233/241 .530/.545 114° 2400-6200 Good idle, great mid range performance. 10.0:1+ CR, 2600+ stall & 3.73 or lower gears Cam Small Block Chev Hyd Roller 237/237 .560/.560 110° 2400-6400 Rough idle, Street/Strip, strong mid range. 10.0:1 CR, 2500+ stall.

Cam Small Block Chev Hyd Roller 237/245 .560/.560 110° 2400-6400 Rough idle, Street/Strip applications. 10.0:1 CR, good exhaust, 3000+ stall.

Cam Small Block Chev Hyd Roller 241/247 .545/.565 110° 2600-6400 Rough idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

Cam Small Block Chev Hyd Roller 241/247 .545/.565 112° 2600-6500 Small Base Circle, Rough idle, Bracket Race with excellent mid & upper end HP Cam Small Block Chev Hyd Roller 247/253 .565/.580 112° 2800-6600 Lopey idle, broad mid to upper mid range power.

3500+ stall.

Cam Small Block Chev Hyd Roller 247/255 .600/.600 110° 3000-6600 Small Base Circle, Hot Street/Brackets. Requires aftermarket heads, 3500+ stall.

Cam Small Block Chev Hyd Roller 247/255 .600/.600 112° 3000-6800 Pro Street/Bracket, good top end horsepower.

Needs compression & 3500+ stall.

Cam Small Block Chev Hyd Roller 251/259 .600/.600 110° 2800-6400 Rough Idle,Best in large 420+ ci. Engine, Great Upper Mid to Top End Performance Cam BBC Gen IV Hyd Roller 243/249 .640/.640 112° 3000-6500 Lopey idle, broad mid range power. 10.0:1 CR, 3000+ stall.

Cam BBC Gen IV Hyd Roller 249/255 .640/.640 110° 3400-6800 Lopey idle, Pro Street/Bracket. 10.5:1+ CR advised.

OK with NOS. Cam BBC Gen IV Hyd Roller 249/255 .640/.640 114° 3400-6800 Lopey idle, Pro-Street/Bracket. 10.5:1+ CR advised. OK with NOS. Cam BBC Gen IV Hyd Roller 253/259 .680/.680 112° 3600-6900 Strip/Bracket. 540+ cubic inch with good heads.

Great upper mid range.

Cam Holden EFI Hyd Roller 213/219 .480/.480 112° 1400-5200 Fair Idle,Mild Street Performance, Strong Low End Torque Cam Holden EFI Hyd Roller 237/245 .597/.597 110° 3200-7000 Rough idle, Hot Street, needs modified intake & exhaust. Needs 3500+ conv.

Cam Holden EFI Hyd Roller 237/245 .597/.597 112° 3200-7000 Rough Idle, Hot Street, Needs Modified Intake & Exhaust, Needs 3500+ stall Cam Pontiac V8 Hyd Roller 253/259 .600/.600 108° 3200-7000 Hot Street/Bracket, Major Mid Range & Top End Perf. 11.0:1+CR , 3500+ stall

HC-110315-10

$CALL

HC-180525-12

$CALL

HC-110265-10

$CALL

HC-110265-12

$CALL

HC-180265-14

$CALL

HC-110635-10

$CALL

HC-111815-10

$CALL

HC-110275-10

$CALL

HC-110275-12S $CALL

HC-110345-12

$CALL

HC-113155-10S $CALL

HC-113155-12

$CALL

HC-111335-10S $CALL

HC-120665-12

$CALL

HC-120345-10

$CALL

HC-120345-14

$CALL

HC-122455-12

$CALL

HC-677125-12

$CALL

HC-675825-10

$CALL

HC-675825-12

$CALL

HC-414455-08

$CALL

ALL PRICES IN THIS NEWSLETTER ARE SUBJECT TO GST

• • • •

4130 Chrome Moly Swedged End Pushrods

Meticulously formed ends with exact radii Excellent concentricity, closely controlled length Heat treated and black oxide finished Private label programs available Length 6.050 6.100 6.150 6.200 6.250 6.272 6.300 6.350 6.400 6.450 6.500 6.550 6.600 6.650 6.700 6.750 6.800 6.850 6.900 6.950 7.000 7.050 7.100 7.150 7.200 7.250 7.300 7.325 7.350 7.375 7.400 7.425 7.450 7.500 7.550 7.600 7.625 7.650 7.675 7.700 7.725 7.750 7.775 7.800 7.825 7.850 7.875 7.900 7.925 7.950 7.975 8.000 8.025 8.050 8.075 8.100 8.125 8.150

5/16” Dia. .080” Wall Part No. 25605-16 25610-16 25615-16 25620-16 25625-16 25627-16 25630-16 25635-16 25640-16 25645-16 25650-16 25655-16 25660-16 25665-16 25670-16 25675-16 25680-16 25685-16 25690-16 25695-16 25700-16 25727-16 25729-16 25741-16 25733-16 25734-16 25730-16 25731-16 25751-16 25732-16 25735-16 25759-16 25736-16 25754-16 25755-16 25767-16

5/16” Dia. .120” Wall Part No.

25768-16

25232-16

25772-16

25233-16

25707-16

25234-16

25709-16 25781-16 25711-16

25235-16 25281-16 25236-16

25712-16

25237-16

25715-16

25238-16

25716-16

25239-16

25721-16

25240-16

25722-16

25241-16

25744-16

25242-16

3/8” Dia. .080” Wall Part No.

25211-16 25212-16 25213-16 25214-16 25215-16 25216-16 25217-16 25218-16 25219-16 25220-16 25221-16 25222-16 25223-16 25224-16 25225-16

25843-8 25844-8 25846-8 25837-8 25838-8 25839-8 25817-8 25819-8 25853-8 25857-8 25862-8 25827-8 25829-8 25841-8 25872-8 25873-8 25874-8

25226-16

25851-8

25227-16

25822-8

25228-16 25229-16 25230-16 25231-16

25836-8 25854-8 25818-8 25876-8 25824-8 25877-8 25834-8 25828-8 25831-8 25832-8 25833-8 25787-8 25808-8 25878-8 25879-8 25788-8 25813-8 25814-8 25809-8 25816-8 25802-8 25821-8 25807-8 25810-8 25811-8 25815-8

3/8” Dia. .120” Wall Part No.

7/16” Dia. .165” Wall Part No.

25305-8 25306-8 25307-8 25308-8 25309-8

25316-8 25317-8 25318-8 25319-8

25331-8

25174-8

25332-8

25129-8

25333-8

25130-8

25334-8

25131-8

25335-8

25132-8

25336-8

25133-8

25337-8

25134-8

25338-8

25135-8

25339-8

25136-8

25340-8

25137-8

25341-8

25138-8

25342-8

25139-8

5/16” .080” Wall Length 8.175 8.200 8.225 8.250 8.275 8.280 8.300 8.325 8.350 8.375 8.380 8.400 8.425 8.450 8.475 8.500 8.525 8.550 8.575 8.600 8.625 8.650 8.680 8.700 8.725 8.750 8.775 8.800 8.825 8.850 8.875 8.900 8.925 8.950 8.975 9.000 9.025 9.050 9.075 9.100 9.125 9.150 9.175 9.200 9.250 9.300 9.350 9.400 9.450 9.500 9.550 9.600 9.650 9.700 9.750 9.800

5/16” Dia. .080” Wall Part No. 25745-16 25701-16 25753-16 25702-16 25762-16 25703-16 25763-16 25706-16 25764-16 25708-16 25774-16 25710-16 25718-16 25724-16 25799-16 25738-16 25742-16 25746-16 25758-16 25757-16 25765-16 25766-16 25776-16 25791-16 25792-16 25800-16 25801-16 25803-16 25804-16 25805-16 25806-16 25848-16 25849-16 25859-16 25864-16

5/16” Dia. .120” Wall Part No.

3/8” Dia. .080” Wall Part No. 25812-8 25820-8 25823-8 25825-8 25795-8 25830-8 25826-8 25835-8 25769-8 25840-8 25842-8 25845-8 25847-8 25850-8 25856-8 25855-8 25858-8 25860-8 25863-8 25865-8 25797-8 25870-8 25867-8 25875-8 25868-8 25880-8 25882-8 25885-8 25887-8 25890-8 25892-8 25895-8 25897-8 25900-8 25926-8 25905-8 25927-8 25910-8 25928-8 25915-8 25929-8 25920-8 25796-8 25930-8 25770-8 25940-8 25945-8 25950-8 25955-8 25960-8 25798-8 25970-8 25975-8 25980-8

5/16” .120” Wall

3/8” Dia. .120” Wall Part No.

7/16” Dia. .165” Wall Part No.

25343-8

25140-8

25344-8

25141-8

25345-8

25142-8 25143-8

25346-8

25144-8

25347-8

25145-8

25348-8

25146-8

25349-8

25147-8

25350-8

25148-8

25351-8

25149-8

25352-8 25353-8

25150-8 25151-8 25152-8

25354-8

25153-8

25355-8

25154-8

25356-8

25155-8

25357-8

25156-8

25358-8

25157-8

25359-8

25158-8

25360-8

25159-8

25361-8

25160-8

25362-8

25161-8

25363-8 25364-8 25365-8 25366-8 25367-8 25368-8 25369-8 25370-8 25371-8 25372-8 25373-8 25374-8 25375-8

25162-8 25163-8 25164-8 25165-8 25166-8 25167-8 25168-8 25169-8 25170-8 25171-8 25172-8 25173-8 25175-8

ALL PRICES IN THIS NEWSLETTER ARE SUBJECT TO GST

4130 Chrome Moly Swedged End Pushrods Length 9.850 9.900 9.950 10.000 10.050 10.075 10.100 10.125 10.150 10.200 10.250 10.300 10.325 10.350 10.400 10.450 10.475 10.500 10.525 10.550 10.575 10.600 10.625 10.650 10.700 10.750 10.800 10.850 10.875 10.900 10.925 10.950 11.000 11.050 11.100 11.150 11.200 11.250 11.300 11.350 11.400 11.450 11.500 11.550 11.600 11.650 11.700 11.750 11.800 11.850 11.900 11.950 12.000 12.050 12.100 12.150

5/16” Dia. .080” Wall Part No. 25869-16

5/16” Dia. .120” Wall Part No.

3/8” Dia. .080” Wall Part No. 25985-8 25990-8 25995-8 25906-8 25907-8

3/8” Dia. .120” Wall Part No. 25376-8 25377-8 25378-8 25379-8 25380-8

25901-8

25381-8

25908-8 25909-8 25911-8 25912-8

25382-8 25383-8 25384-8 25385-8

25913-8 25902-8 25914-8

25386-8 25387-8 25388-8

25903-8

25389-8

25916-8

25390-8

25917-8

25391-8

25918-8 25919-8 25921-8 25922-8 25923-8

25392-8 25393-8 25394-8 25395-8 25396-8

25924-8

25397-8

25925-8 25904-8

25398-8 25399-8

7/16” Dia. .165” Wall Part No. 25176-8 25177-8 25178-8 25179-8 25100-8 25101-8 25102-8 25103-8 25104-8 25123-8 25124-8 25105-8 25106-8 25125-8 25126-8 25107-8 25108-8 25109-8 25110-8 25111-8 25112-8 25113-8 25114-8 25119-8 25120-8 25121-8 25127-8 25115-8 25116-8 25117-8 25118-8 25122-8 25128-8 25180-8 25181-8 25182-8 25183-8 25184-8 25185-8 25186-8 25187-8 25188-8 25189-8 25190-8 25191-8 25192-8 25193-8 25194-8 25195-8 25196-8 25197-8 25198-8 25199-8 25200-8 25201-8 25202-8

3/8” .080” Wall

• • • •

3/8” .120” Wall

7/16” .165” Wall

Meticulously formed ends with exact radii Excellent concentricity, closely controlled length Heat treated and black oxide finished Private label programs available

5/16 .080 $CALL 5/16 .120 $CALL 3/8 .080 $CALL 3/8 .120 $CALL 7/16 up to 11" $CALL 7/16 from 11" $CALL

ALL PRICES IN THIS NEWSLETTER ARE SUBJECT TO GST

Engine building Tools Pushrod checker cup style 7.200-8.300 length TFS-9005 $CALL CALL0-CALL0 length TFS-9007 $CALL

Degree Wheel Kit TFS-90000 $CALL

Deluxe Cartridge Roll Porting Kit TFS-90001 $CALL

Three Piece Carbide Deburring Set TFS-90002 $CALL

Camshaft installation handle 8" long TFS-90150 $CALL

Valve spring compressor LS1/LS6/LS2 TFS-90306 $CALL L92/LS3/L99/LS7/LS9 TFS-90307 $CALL

V/Spring Compressor Fits Ford 2V Modular TFS-90518 $CALL

Cylinder Heads Work Stands Pair TFS-9100 $CALL

Electric Ring Filer 66765 $CALL

Valve Spring Chamfering Tool 40174 $CALL

Valve Guide Seal Cutter (Sizes 7mm to 3/8") $CALL

Cylinder Head Valve Spring Seat Cutter (1.260"to 1.755") $CALL

Rocker Stud Boss Cutter 41860 $CALL

On Car Valve Spring Compressor 41870/41830 $CALL

Pushrod Length Checker 3/8 or 7/16 SBC 42132/42137 $CALL

Mechanics Apron 42014 $CALL

Camshaft Installation Handle HC-66897 $CALL

Piston Pin Lock Knock In Tool (.927) M-W927-990 $CALL

CD Carburettor Adjusting Tool Hex End TA24 Spade End TA25

$CALL $CALL

SU Carburettor Spanner Kit WZX2002 $CALL

Torque To Angle Indicator Tool TRQ1 $4.90

Top Dead Centre Tool ( Heads On) HC-66792 $CALL

Top Dead Centre Tool ( Heads Off) HC-66799 $CALL

Valve Spring Compressor (Stud Mount) HC-66784 $CALL

Piston Ring Filer (Replacement Wheel)

Block Filler 25lbs Bucket HC-ROK $CALL

ALL PRICES IN THIS NEWSLETTER AREGauge SUBJECT TO GST Tapered Ring Compressors (Various Sizes) Billet Rod Bolt Stretch $CALL ARP100-9942 $CALL

HC-66785 $CALL HC-66786 $CALL

6-1/2" Super Pliers

Stainless Steel Gripper Nippers

For the serious blue water fisherman, spring loaded 6-1/2" Super Pliers or the familiar 5" size without spring. Both pliers stay sharp cutting wire long after other brands are thrown away. Super Pliers are available with our popular black oxide coating or rust resistant Teflon. Daily fresh water rinse and oil will ensure years of service. Tested from St. Thomas to the Great Barrier Reef in Australia.

The new Manley Gripper Nipper is designed expressly for the fastidious light line spin cast angler and fly fisherman, in salt water and fresh, desiring a single multipurpose tool for every contingency. Stainless Steel for rust resistance. Super sharp cutting edges to cleanly part lines and leaders so they can be easily fed through tiny hook eyes. Pointed and serrated jaws to crush barbs and extract hooks from trout, bone-fish, tarpon and snook. Spring loaded. Lock mechanism for safety. Comfortable, cushy, non-slip grips. #2016 7" Gripper Nipper $CALL

Stainless Steel Monofilament Nipper

Developed for the swordfish long-lining industry, this heavy duty nipper has the integrity to cut 700 lb. mono virtually forever while maintaining the precision to cleanly part the skimpiest of line. Super sharp cutting edges! Stainless steel for rust resistance. Integral plastic handles. Spring loaded for convenience.

Lock mechanism for safety. This tool is the answer to the monofilament fishermen’s dreams. #2011

7" Stainless Steel Mono Nipper

$CALL

2000 2002 2004 2006

$CALL $CALL $CALL $CALL

5" Super Pliers

5 Inch Super Pliers Black Oxide 2001 $CALL 5 Inch Black Oxide W/Grips 2003 $CALL 5 Inch Super Pliers Teflon Coated 2005 $CALL 5 Inch Teflon W/Grips 2007 $CALL

Brass Fishing Scale with tell-tale

Stainless Steel Long Nose Pliers

If you fish live bait with small hooks, or catch fish which tend to get hooked deep, we have the answer - a quality, rust resitant STAINLESS STEEL tool to help retrieve those hooks. The Manley Long Nose Plier is a full 8" long to reach deep into a fish’s throat.

The Long Nose Pliers have a cutting jaw which is adequate for light cutting work. Heavy cutting will require Manley 6-1/2" or 5" Super Pliers with the side cutting jaws.

The Long Nose Pliers are fitted with attractive vinyl plastisol handle grips. #2010 8" Stainless Steel Long Nose Pliers

6 1/2 Inch Super Pliers Black Oxide 6 1/2 Inch Black Oxide With Grips 6 1/2 Inch Super Pliers Teflon Coated 6 1/2 In Super Pliers Teflon Coatedw/Grips

$CALL

This should be in every tackle box. A quality scale with corrosionresistant brass body and easy-to-read increments.

Available in both 50 lb. and 25 lb. models.

Useful for setting reel drags or weighing the “Big One”. The 8-1/2" body and cylindrical shape allow easy storage in a tackle box or tackle drawer on your boat.

50 Lb Brass Fishing Scale With Tell-Tale Ring 25 Lb Brass Fishing Scale With Tell-Tale Ring

2012 2013

$CALL $CALL

Rugged Clip-On Plier Cases

Nylon webbing construction with stainless steel clip that works with a belt or the waistband of your pants. Lightweight and handsome, these cases will keep your pliers handy when you need them most. Impervious to saltwater.

Case For 8 Inch Inch Needle Nose Pliers 2020 Case For 6 1/2" And 7 Inch Super Pliers & Mono Nipper 2030 Case For 5 Inch Pliers 2040 Case For 6 1/2 Inch Pliers And Bait Knife 2050

$CALL $CALL $CALL $CALL

ALL PRICES IN THIS NEWSLETTER ARE SUBJECT TO GST