Issuu on Google+

Aluminium Shaft Rocker System

Top Dead Centre Tool

This tool provides a positive stop for the piston when locating top dead center. It screws into the spark plug hole.

$CALL

$CALL

Howards Camshaft Break In Lube

Chrome Rocker Cover SBC Tall Height (pair)

$CALL

$CALL

7.25" 318/340/360 Chrysler (All) Harmonic Damper

$CALL

JUNE-JULY 2014

CHEV 262-400, 1.6 Ratio FORD 289-351W, 1.60 Ratio FORD 289-351W, 1.70 Ratio

For all 3/8" and 7/16" Rocker Studs. Remove valve spring from an assembled engine for checking or replacing quickly and easily. Press down to compress coil spring, then remove valve keepers. Release slowly. HC-66784

$CALL All prices are quoted ex warehouse & subject to gst and are correct at time of printing. Prices valid to current account customers only, on a first come first served basis and on current stock only (No backorders) Prices will return to normal once current stock is soldout.

fabre.com.au / facebook.com/fabre.australia


WHO YOU GONNA CALL? Why buy a crate engine for around $15,000 or more and still not know what your getting? Build your own Big Block Chev. 509ci - 532ci $CALL

Description MERLIN III BBC BLOCK 9.800” DECK x 4.500” BORE WITH 4 BOLT SPLAYED MAIN CAPS ALL LOCATIONS MANLEY FORGED 4340 4” STROKED CRANKSHAFT MANLEY FORGED 4340 “H” BEAM CONROD SET MANLEY FORGED 2618 PISTON SET MANLEY / TOTAL SEAL RING SET CLEVITE CONROD BEARING SET CLEVITE MAIN BEARING SET CLEVITE CAM BEARINGS MELLING OIL PUMP (HI VOLUME) MELLING OIL PUMP DRIVE SHAFT MANLEY MOLY 1 PIECE 3/8 PUSH ROD SET HOWARDS CAMS 9 KEYWAY DOUBLE ROW TIMING SET HOWARDS CAMS ROLLER ROCKER SET HOWARDS CAMS SOLID ROLLER CAM HOWARDS CAMS SOLID ROLLER LIFTER SET MERLIN SMALL PARTS FITTING KIT TRICKFLOW PowerOval® 280 ASSEMBLED HEADS PAIR

Qty: 1 1 1 1 1 1 1 1 1 1 16 1 1 1 1 1 1

ALL PRICES IN THIS NEWSLETTER ARE SUBJECT TO GST


xr6 pistons Turbo 4.0l (BA Falcon) • • • • • • • • •

TURBO 4.0L (BA FALCON) 2618 high strength material" Offset wrist pin for quiet start-ups 2.500 x .150" wall Premium Chrome Moly pin included 9310 alloy .180"" wall pin upgrades available P/N 42507 Pressure balance groove" Will accommodate +1mm valve sizes" Premium Steel top ring sets and Round Wire locks included Recommended piston clearance .0030" measured 1.100" from the bottom of the oil ring

Common Features Crown Thickness: Top Ring: Second Ring: Oil Ring: Valve Notches: Round Wire Locks: Pin Included:

NEW PRODUCT

.250” 1.2mm, .320” down 1.5mm 3mm .100” (Exhaust only) P/N 42270 - .061” Wide Premium Chrome Moly P/N 42207 (.150” wall, 106 grams, 2.500” long, 22mm dia.)

$CALL

Part No.

Bore Size MM

Over Size

Rod Length

Stroke

Comp Distance

628000C-6 628004C-6 628014C-6

3.633” 3.637” 3.647”

STD +.004” +.014”

6.058” 6.058” 6.058”

3.910” 3.910” 3.910”

1.215” 1.215” 1.215”

Dome Volume (cc) -16 -16 -16

628100C-6 628104C-6 628114C-6

3.633” 3.637” 3.647”

STD +.004” +.014”

6.058” 6.058” 6.058”

3.910” 3.910” 3.910”

1.215” 1.215” 1.215”

-10 -10 -10

Cylinder Head (cc)

Comp Ratio

Piston Type

Piston Wt/Gms

Include Ring Set

66 66 66

8.5:1 8.5:1 8.5:1

DISH DISH DISH

382 385 389

46923-6 46924-6 46926-6

66 66 66

9.0:1 9.0:1 9.0:1

DISH DISH DISH

384 388 393

46923-6 46924-6 46926-6

Need Rods? Get the BEST! Manley Pro Series I Beams • • • • •

Forged from 4340 aircraft quality vacuum degassed material Shot peened after machining to MIL spec and 100% individually magnafluxed Specifically designed to handle high horsepower applications when using turbos and / or nitrous Cap fasteners are 7/16” ARP 2000 fasteners Flywheel horsepower range for these rods is 1,250+

Part No.

Decription

14427-6

BA Falcon XR6 Turbo 4.0l

Centre-toCentre 6.058”

Big End Bore 2.239”

Big End Width .990”

$CALL

Pin Diamater

Pin Bore

.866” (22mm)

.8671”

Gram Weight 46926-6

BUY PISTONS & RODS TOGETHER & SAVE AN EXTRA 5% ALL PRICES IN THIS NEWSLETTER ARE SUBJECT TO GST


S O B M O C D N E P O T EVELAND

CL

225cc Runner $CALL Part Number TFS-5160T005-C01-TEC

Description Trickflow PowerPort® Cleveland 225 CNC’d Assembled Heads (pair) Felpro Intake Gasket set Felpro Exhaust Gasket set Felpro Head Gaskets (pair) Fabricated Alloy Rocker Covers with bolts (pair) Felpro Rocker Cover Gaskets (pair) Trickflow TrackHeat Manifold 9.2 or 9.5” Deck Height ARP Head Bolt Set ARP Intake Manifold Bolt Set

Also available with 195cc Runner at $CALL ALL PRICES IN THIS NEWSLETTER ARE SUBJECT TO GST


Toyota 86 & Subaru BRZ

PERFORMANCE PARTS Valves SUPERTECH EXHAUST VALVE INCONEL 29MM SUPERTECH INLET VALVE 35MM

$CALL $CALL

Valve Spring & Retainer Kits SUPERTECH DUAL VALVE SPRING AND Ti RETAINER KIT 74@35.5MM SUPERTECH DUAL VALVE SPRING AND Ti RETAINER KIT 85@35.5MM

$CALL $CALL

Connecting Rods MANLEY PRO SERIES “I” BEAM CON ROD SET CARILLO H BEAM CON ROD SET

$CALL $CALL

Piston & Ring Sets MANLEY PLATINUM SERIES PISTON & RING SET CP FORGED PISTON AND RING SET

$CALL $CALL

Sleeve Kit DARTON SLEEVE KIT

$CALL

ARP Head Stud & Bolt Kits ARP HEAD STUD KIT (12 STUDS) ARP FLYWHEEL BOLT SET ARP FLEXPLATE BOLT SET

$CALL $CALL $CALL

Gasket Sets COMETIC MLS HEAD GASKETS PAIR .032”

$CALL ALL PRICES IN THIS NEWSLETTER ARE SUBJECT TO GST


SBC Killer Combos

383 or 427 SBC 383 or 427 Small Block Chev. Stroker Kit Includes: 4340 Forged Manley Crankshaft 4340 Forged Manley "H" Beam Conrods 4032 Forged Mahle Motorsport Pistons Moly Mahle Motorsport Piston Rings

$CALL

383 -402-427 LS Chev LS 383 - 402 - 427 Stroker Kit Includes: 4340 Forged Manley Crankshaft 4340 Forged Manley “H” Beam Conrods 4032 Forged Mahle Motorsport Pistons Moly Mahle Motorsport Piston Rings

$CALL

Need more info? Call 1300 350 351 ALL PRICES IN THIS NEWSLETTER ARE SUBJECT TO GST


Manley S/C Stroker Kits

Mitsubishi Evo X 4B11T MANLEY 4340 BILLET 94MM STROKE CRANKSHAFT MANLEY 4340 “H” BEAM CONROD SET MANLEY 2618 PLATINUM PISTON & RING SET MITSUBISHI EVO X 4B11T FASTEST EVO X IN THE WORLD (STANDING MILE) 200.8MPH FIRST EVO X TO 200MPH HIGHEST HORSE POWER EVO X MR 635HP FIRST EVO X TO 600HP ALL OF THESE RECORDS SET USING MANLEY INTERNALS (RECORDS CORRECT AS OF 02/04/2013)

$CALL Subaru EJ20 & 25 MANLEY 4340 BILLET 79MM STROKE CRANKSHAFT MANLEY 4340 “H” BEAM CONROD SET MANLEY 2618 PLATINUM PISTON & RING SET SUBARU EJ20 EJ25 TURBO 2.5 LTR. FULL WEIGHT STREET LEGAL SUBARU GOES 9.76ET@143MPH USING MANLEY INTERNALS BILLET CRANK / TURBO TUFF RODS / PLATINUM RODS / STAINLESS VALVES / CONICAL SPRINGS / Ti RETAINERS.

$CALL ALL PRICES IN THIS NEWSLETTER ARE SUBJECT TO GST


FORD 351C HYDRAULIC FLAT TAPPET PartNumber: HC-230011-12 HC-232171-11 HC-231031-10 HC-230931-10 HC-230021-12 HC-230991-08 HC-230041-12 HC-230961-08 HC-232141-10 HC-232601-08 HC-231721-08 HC-231721-10 HC-232531-08 HC-232531-10 HC-231541-08 HC-231541-10

Stage Description: RPM Range 1 1200-4600 1.5 1400-4800 2 1600-5000 2.5 1800-5200 3 1600-5400 3.5 2000-5600 4 2200-5800 4.5 2400-6000 5 2600-6200 5.5 2800-6400 6 3000-6600 6.5 3000-6600 7 3200-6800 7.5 3200-6800 8 3400-7000 8.5 3400-7000

Howards Cam Ford 351C 204/.486 214/.512 On 112 EXCEPTIONAL LOW END TORQUE / GOOD IN UTES Howards Cam Ford 351C 208/.484 208/.484 On 111 SMOOTH IDLE / GOOD FUEL ECO / GREAT TOWING Howards Cam Ford 351C 214/.495 214/.495 On 110 FAIR IDLE / GOOD LOW-MID RANGE TORQUE / NEED 4BBL. CARB. Howards Cam Ford 351C 214/.515 214/.515 On 110 STRONG LOW-MID RANGE / GOOD FUEL EFFICIENCY AND DRIVE Howards Cam Ford 351C 214/.512 224/.538 On 112 HOT STREET & MILD BRACKET / WORKS WELL WITH NOS Howards Cam Ford 351C 220/.545 220/.545 On 108 GOOD LOW & MID RANGE HORSEPOWER / NEEDS 4 BARREL Howards Cam Ford 351C 224/.538 234/.562 On 112 LOPEY IDLE / MODERATE PERF. / HIGHER COMP. RECOMMENDED Howards Cam Ford 351C 228/.544 228/.544 On 108 FAIR IDLE / STRONG MID RANGE / WORKS BEST WITH DUAL PLANE Howards Cam Ford 351C 230/.554 235/.554 On 110 LOPEY IDLE / STRONG MID RANGE / GOOD THROTTLE RESPONSE / 2400+ STALL Howards Cam Ford 351C 235/.562 240/.579 On 108 LOPEY IDLE / GOOD MID RANGE POWER / NEEDS 3200+ STALL Howards Cam Ford 351C 240/.640 246/.640 On 108 HOT STREET/MILD BRACKETS / NEEDS 10.0:1+CR 3000+ STALL Howards Cam Ford 351C 240/.588 246/.588 On 110 LOPEY IDLE/ STREET-STRIP / BROAD MID RANGE / 9.5:1+ CR / 2800+ STALL Howards Cam Ford 351C 244/.585 254/.610 On 108 PRO STREET-BRACKET / STRONG MID & UPPER END / 10.0:1+ CR / 3200+ STALL Howards Cam Ford 351C 244/.585 254/.610 On 110 HOT STREET-BRACKET / STRONG MID & UPPER END / 10.0:1+ CR / 3200+ STALL Howards Cam Ford 351C 248/.600 254/.614 On 108 ROUGH IDLE / GREAT MID RANGE ACCELERATION / 3500+ STALL / 10.5:1 CR Howards Cam Ford 351C 248/.600 254/.614 On 110 ROUGH IDLE/ GREAT MID RANGE / 10.5:1 CR / 3500+ STALL

Price $CALL $CALL $CALL $CALL $CALL $CALL

PartNumber: HC-232342-08 HC-232342-10 HC-232332-10 HC-232182-06 HC-232372-10 HC-232362-08 HC-232192-08 HC-232322-08 HC-231332-08

Description: Howards Cam Ford 351C 230/.554 230/.554 On 108 FAIR IDLE / STREET-STRIP / EXCELLENT MID RANGE / 3000+ STALL Howards Cam Ford 351C 230/.554 230/.554 On 110 GOOD STREET CAM / BROAD POWER RANGE / 2200+ STALL Howards Cam Ford 351C 268/.640 278/.640 On 110 MILD LOPEY IDLE / STREET-STRIP / GREAT MID RANGE / 9.5:1+ CR / 2800+ STALL Howards Cam Ford 351C 244/.569 254/.590 On 106 ROUGH IDLE / SUPER MID RANGE / NEEDS 10.5:1+ COMP Howards Cam Ford 351C 250/.614 256/.631 on 110 PRO STREET BRACKET / NEEDS 10.5:1+ COMP & 3500+ STALL Howards Cam Ford 351C 252/.630 260/.644 on 108 ROUGH IDLE / STRONG MID RANGE POWER Howards Cam Ford 351C 260/.640 260/.640 On 108 PRO STREET BRACKET / NEEDS 11.1+ COMP & 3500+ STALL Howards Cam Ford 351C 260/.640 268/.640 on 108 LOPEY IDLE / PRO STREET BRACKET / 11:1 COMP & 4000+ STALL Howards Cam Ford 351C 236/.570 240/.570 On 108 ROUGH IDLE / E.T BRACKET / STRONG MID TO TOP END / 4500+ STALL

$CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL $CALL

Pack 16

Description: 7/16 STUD MOUNT 1.73 RATIO

Pack 16 16 16 16 16 16 16

Description: HYDRAULIC FLAT TAPPET HYDRAULIC FLAT TAPPET ANTI PUMP UP HYDRAULIC ROLLER STREET TI-BAR MECHANICAL (SOLID) FLAT TAPPET MECHANICAL (SOLID) FLAT TAPPET DIRECT LUBE (COOL FACE) MECHANICAL (SOLID) ROLLER STREET TI-BAR MECHANICAL (SOLID) ROLLER PRO SERIES WITH PIN OILERS

Price $CALL $CALL $CALL $CALL $CALL $CALL $CALL

HYDRAULIC ROLLER PartNumber: HC-233215-10 HC-230245-10 HC-230245-12 HC-231175-10 HC-231175-12 HC-230335-10

Price $CALL $CALL $CALL $CALL $CALL $CALL

Stage RPM Range 1 1600-5600 2 2000-6000 3 2000-6000 4 2800-6400 5 2800-6400 6 3400-7000

Description: Howards Cam Ford 351C 218/.570 224/.578 On 110 MILD IDLE / GREAT STREET / GOOD LOW END TORQUE & POWER Howards Cam Ford 351C 224/.578 230/.587 On 110 MILD LOPEY IDLE / STREET/MILD BRACKET / GOOD LOW TO MID 9.5:1 Howards Cam Ford 351C 224/.578 230/.587 On 112 FAIR IDLE / STREET / GOOD LOW-MID RANGE TORQUE / 9.5:1 COMP. Howards Cam Ford 351C 232/.588 242/.605 On 110 FAIR IDLE / STREET STRIP / GREAT POWER RANGE / 10:1+ COMP Howards Cam Ford 351C 232/.588 242/.605 On 112 ROUGH IDLE / STREET BRACKET / GOOD MID TORQUE & UPPER HP Howards Cam Ford 351C 248/.622 252/.622 On 110 FAIR IDLE / STREET STRIP / GOOD MID RANGE POWER 11.5:1 COMP

Price $CALL $CALL $CALL $CALL $CALL $CALL

MECHANICAL (SOLID) ROLLER PartNumber: HC-230173-08 HC-231313-08 HC-231733-08 HC-231133-08 HC-230073-08 HC-231123-08 HC-231193-06

Stage RPM Range 1 2600-6600 1.5 2800-6700 2 3000-6800 2.5 3400-7000 3 3800-7400 4 4000-7800 5 4200-8000

Description: Howards Cam Ford 351C 242/.657 248/.657 On 108 MILD ROUGH IDLE / STREET STRIP / LOW-MID RANGE PERFORMANCE Howards Cam Ford 351C 246/.675 246/.675 On 108 LOPEY IDLE / EXCELLENT MID RANGE POWER BAND / 3200+ STALL Howards Cam Ford 351C 250/.692 258/.692 On 108 ROUGH IDLE / HOT STREET / GOOD MID RANGE TORQUE & HP Howards Cam Ford 351C 258/.692 268/.692 On 108 ROUGH IDLE / MID TO UPPER HP & TORQUE / 11.0:1+ CR Howards Cam Ford 351C 250/.692 258/.692 On 108 ROUGH IDLE / ET BRACKETS / STRONG MID-TOP END / 4000+ STALL Howards Cam Ford 351C 268/.727 276/.709 On 108 ROUGH IDLE / GOOD MID-UPPER HP / 4000+ STALL & HEADERS Howards Cam Ford 351C 274/.727 282/.709 On 106 ROUGH IDLE / SUPER GAS / GREAT TOP END / 12:1 COMP. 4500+ STALL

Price $CALL $CALL $CALL $CALL $CALL $CALL $CALL

$CALL $CALL

PUSH RODS

$CALL

PartNumber: 25706 25750 25752 25840 25347

ROLLER ROCKERS PartNumber: HC-90083F

PartNumber: HC-91211 HC-91212 HC-91168 HC-91215 HC-91218 HC-91219 HC-91278

$CALL

MECHANICAL (SOLID) FLAT TAPPET Stage RPM Range 1 2000-6000 1.5 2000-6200 2 2400-6400 2.5 2800-6800 3 3200-7200 3.5 3400-7500 4 3600-7600 4.5 3800-7800 5 4400-8000

LIFTERS

Price $CALL

Pack 16 16 16 16 16

Description: 5/16 / 1 PIECE / 4340 MOLY / 8.400" LONG / 0.080" WALL 5/16 / BALL END / 1010 STEEL / 8.408" BALL END 3/8 / 1 PIECE / 4340 MOLY / 8.408" LONG / 0.080" WALL 3/8 / 1 PIECE / 4340 MOLY / 8.400" LONG / 0.080" WALL 3/8 / 1 PIECE / 4340 MOLY / 8.400" LONG / 0.120" WALL

Price $CALL $CALL $CALL $CALL $CALL

Purchase ANY Roller Cam & Get a FREE T-Shirt Offer valid till the end of July or while stocks last

ALL PRICES IN THIS NEWSLETTER ARE SUBJECT TO GST


Fabre Australia June July 2014 Newsletter