Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:14 AM Page 3
*
The First and Only No Worry Hydraulic Flat Tappet Cam & Lifter Sets
Confidence! That’s what you get when you install a New Max Certified Cam and Lifter Set. A superior product with quality control goes far beyond, including batch testing and verification on an Adcole 911NT. The Adcole is the premier measurement equipment for camshafts in the world. So you know you’re getting the finest camshaft for your application available. Each set includes a performance hydraulic camshaft, a set of matching hydraulic flat tappet lifters and a bottle of Max ZPM oil additive for break-in (Max ZPM must be added to every oil change). So what happens if you still have a cam damaging event?...You’re Covered! We will replace your Max Certified Cam & Lifter Set at no charge for up to five years from date of original purchase. Just completely fill out the supplied warranty card and return along with your camshaft, lifters and the original receipt. No Cam & Lifter Set Part No.
Cam & Direct Lube Lifter Set Part No.
MC312481-11
NA
AMERICAN MOTORS V8
MC311451-08
NA
Duration Advertised IN EX
• 290-401 1966-1991
269
1200-5200
CHEVROLET SMALL BLOCK
MC112001-14 MC112011-11
MC110931-11
MC110991-08 MC110951-10 MC112431-08 MC110041-10
MC112001-14DL 4 MC112011-11DL 4
MC110931-11DL 4
MC110991-08DL 4 MC110951-10DL 4 MC112431-08DL 4 MC110041-10DL 4
Cam Notes: master note list on page 260
267
1800-5800
269
255 261
800-4800
267
1100-5200
275
1700-5700
275
2000-6000
277
2200-6200
279
1800-6000
215
215
Valve Lift w/OE Ratio Rockers IN EX
.475
Lobe Separation Intake Angle Centerline
.475
111
Good idle, Street, Off-Road, Towing. Good fuel efficiency.
267
220
220
.540
261
201
207
.410
107
207
207
.420
213
213
.450
221
221
.470
.420
114
110
Hyd. Hyd.
107
Hyd. Hyd.
.420
111
107
.450 .470
108
104
Hyd. Hyd.
104
Hyd. Hyd.
111
Good low & mid-range horsepower. Needs 4 barrel & headers.
285
221
231
.470
.470
110
Street & Strip. Needs 4 barrel, headers & lower gears.
277
223
223
.450
.450
108
Hot Street cam. 4 barrel & headers recommended.
289
225
235
.465
.488
Fair idle, Hot Street & mild Bracket Racing.
Fax: 1300 350 454
1
Hyd. Hyd.
Strong low & mid-range torque & horsepower.
275
Hyd. Hyd.
104
Good idle, Street, Off-Road, Towing. Good torque.
267
Notes
108
Smooth idle, Strong low end. High vacuum, good fuel economy.
261
Valve Lash IN EX
.540
Classic performance idle, strong mid range torque & power.
1 Stock (O.E.) valve springs cannot be used. 4 Direct Lube Lifters Included in Cam & ”Direct Lube” Lifter (DL) Sets. 15 Lobes designed to take maximum advantage of .904” dia. lifter.
Phone: 1300 350 351
* Max Certified warranty applies to Max Certified Cam & Lifter Sets only. Max Certified 5 year warranty starts from the original date of purchase. Any and all replacements are covered for the remainder of the original warranty as long as any or all repairs or adjustments to end user’s equipment, determined by Howards Cams, is completed. Max Certified warranty covers camshaft and lifter set only. Warranty does not cover removal/installation cost, damage to related components, cost incurred due to down time, towing or shipping. Warranty is non-transferable. Warranty card must be completed for credit to be applied.
Duration @ .050” IN EX
• 262-400 1955-1998
600-4800
worries that you may have overlooked something that damaged your new Max Certified camshaft. Didn’t notice that retainer to seal clearance wasn’t enough?...Covered! Valve spring coil bind...Covered! Have a problem with your oiling system that damages the cam?...Covered! While installing the cam, you drop it and it breaks in two?...Covered! So what are you waiting for? Isn’t it time to make a real performance change to your engine? With Max Certified Cam & Lifter Sets you’re covered! For extra insurance most kits available with Direct Lube lifters.
110
106 106
1,15
Hyd. Hyd.
Hyd. Hyd. Hyd. Hyd.
1 1 1
Max Certified Cam & Lifter Sets continued on page 4
Web: www.fabre.com.au
3
Email: info@fabre.com.au