Skip to main content

Sustainable to the Core

Page 1

Sustainable to the core

Dirk Wynants


Ex tremis

Traces to treasure The traces we leave for the next generations, should be traces to treasure.

4


Pro duct Why on earth? Why do we build new products? Is it just for the sake of launching a new product? Or is there a deeper rationale? At Extremis, we only start developing an idea if it is both necessary and useful. If it offers a solution. And makes you look at things differently. That is our absolute starting point. Immortal ideas From that point on, we take the Idea on a journey to create the best possible impact. Only the strongest ideas have the ability to ripple outward and span decades, not years. We aim to inspire the future by changing today’s way of thinking. Lasting materials To maximize that impact, we employ only the highest quality materials and cutting-edge processes. To construct strong and durable products that sling that one, foundational idea into the future. Carefully designed The best way to make a product last, however, is to make it beautiful. In every aspect. To inspire both care and enjoyment. And become a focal point of the memories and experiences that make life itself truly beautiful. With positive impact That is the impact we strive to create. By transforming radical ideas into game-changing designs. Designs that are not only useful, durable and beautiful in themselves but also have the power to spark meaningful connections and enhance the way we interact with one another. A necessary condition for every Extremis design and the traces it leaves behind.

We strive to create ideas that are loved for their personality, embraced for their quality, and cherished for their impact, as true tools for togetherness.

5


Ex tremis

Sustainability... What’s in a word? What sustainability exactly stands for, will not be the same for everyone. Just like ‘Design’ or ‘Art’, it can’t be caught in a formula of one size fits all. In Dutch it’s translated into ‘duurzaamheid’ (durability), which is in my personal dictionary referring mostly to longevity. For Extremis, sustainability is about a lot more than this.

Definitions Durability the ability to withstand wear, pressure, or damage. Sustainability Sustainable development is the development that meets the needs of the present without compromising the ability of future generations to meet their own needs. "What is sustainability". www.globalfootprints.org. Retrieved 2018-05-02.

6


Dirk Wynants Founder and director of the Extremis and designer of many Extremis tools for togetherness

Following public opinion in ideas that are most popular, is the path most companies go for. Sorry, if we think what the general public believes is not right, we don’t mind to make it extra difficult on ourselves by going against the stream. We have to stick with the values we truly believe in, not what misinformation has put in our minds. Recycling seems to be valued as the most important part of sustainability. Let’s not forget that in most occasions this results in down-cycling. Even if the quality is close to the original material, which in most cases it is not, extra energy and loss will still be part of the process. From Recycling to Circularity The magic word of recycling is being abused in some cases. Is it really that fantastic to make a chair from recycled fishing nets, if you don’t know what material is used to make the new ones? And how great is it to recycle +100 soda bottles into a specific model of a certain chair if that shape is not designed to be made in that material? Of course there are worse things than this, but these marketing stunts are harmful for the understanding of what real sustainability is about. Too often

7

recycling isn’t more an acceptable storage of waste, but as long as the word ‘recycled’ can be applied, everyone is happy. No, not good enough for us. Human centered In general what we see as sustainability, is about how much it contributes to human wellbeing. I’m specifically not referring to all life, and not about the planet, not to lose those who don’t seem to see the need for this, and we can’t get to a sustainable world if we don’t keep those people on board as well. About the planet: it doesn’t need to be protected, it will do just fine. It’s about creating the right conditions where (human) life can thrive on this planet, now and in the future. Part of the conditions for human wellbeing is 'other life', so taking care of it automatically becomes part of it. Why would humans want to live on Mars? It’s still easier to get things right here, than to create the right conditions over there. I’m not totally against developing that dream, but mainly because I hope this will lead to inventions that are useful here on earth. Let us dive into the story of Extremis now.


8


Sustainable to the core Intro Sustainability from the start Sustainability in design Durability of the components Sustainability in aesthetics Sustainable business

9


1. Sustainability from the start

This has been our mission statement since 1994

“Extremis creates ‘furniture outside the ordinary’ with a logical, timeless design that is characterised by surprising functionality, partly due to its use of honest materials. At the heart of its current creations is social and family life outdoors. Throughout the seasons, its creations form an extension of the indoors and become an integral part of the outdoor experience. It is Extremis’ mission to develop pioneering products and concepts and to put them on the international market. In doing so, Extremis appeals to people with a taste for contemporary design and a need for furniture and accessories for outdoor use: people who aim for a good balance between form, function and ecology.” WE GUARANTEE: • original, innovative products with a purpose • superior quality • ecologically responsible use of materials • fast, reliable delivery • professional service before, during and after purchase

10


“By creating an environment of good feeling and good life Extremis wants to stimulate real life face to face communication in order to connect people for better understanding and collaboration. Our solutions are “tools for togetherness” and must always be functional, based on an intelligent design for sustainability and with respect to the ecological challenges.” 11


Not doing what has already been done At Extremis, sustainability and sustainable business are a matter of course. We assume that every product that comes onto the market has an impact on the environment. That is why we would prefer not to put a product on the market at all rather than coming up with a table just like any other. We only launch our design if it genuinely has something to offer the user. This has to do with our appreciation of the Blue Ocean principle. This principle involves avoiding competition and trying above all to set our own, original course. We try to limit our impact on the environment as far as possible. That is simple logic. We do so right from the very first sketches on the drawing board. The entire product life cycle is analysed critically. And we always opt for the least harmful solution. How do we do it? We assume that the most ecological product of all doesn’t need to be thrown away or recycled. Longer-lasting & timeless So to begin with, the product needs to be long-lasting: in terms of material technology and quality, we aim for extreme durability. At every trade fair, owners of Extremis furniture come and tell us that they are still really satisfied after twenty years, although their furniture stays outdoors all year round. What is more, the owner must never fall out of love with the product. You won’t find any trendy patterns in our collection, because fashions come and go. We aim for timeless design. Our goal is for each of our items to become a design classic one day. So that they become heirlooms. Furniture that can be passed down to future generations, along with the memories of all the fun times spent around that very table. The sum of all these collections is Extremis. Founded in 1994 and famous for years as a pioneer and trendsetter. Right from the start, Extremis has experienced sustainable growth. No economic bubbles for us, but

slow growth towards a wider range and a geographically more extensive market. The members of the jury for the DME award, an international award for design management, have also shown their appreciation for Dirk Wynants, the founder and manager of Extremis. They gave Extremis an award two years in a row. OVAM (BE) and Good Design (USA) have also presented Extremis with several sustainability awards. Communication about sustainability Since founding the business, we have been a little reticent in talking about our sustainability. In an age of greenwashing, it just doesn’t sound convincing any more. Businesses can claim whatever they want. And that means that the ones with the biggest marketing budgets are often the best at convincing the customer. At Extremis, we restrict ourselves to providing honest information about our green vision. We talk about materials and how we use them more efficiently. About limiting transport volumes. And we do it all with as much transparency as possible. We realise all too well that producing furniture and distributing it worldwide inevitably has a certain impact. We know there are areas for improvement in the future. That is why we constantly question every design, even if it has been on the market for ten years already. In this respect, ecology and economics go hand in hand. We don’t want to compromise on the quality of our materials. That means we need to use them efficiently to keep the price somewhat lower. Our designs are subjected to a long checklist. And that makes it even more of a challenge for our design team to come up with a solution. A solution with economic potential that is ecologically sound.

12


Sustainability

Technical aspects

Function & Aesthetics

(quality, durability)

(timeless design)

13


2. Sustainability in design What is the best chair? No chair at all! We have taken our design mantra from the Shakers community, a religious community who shook up society in the eighteenth and nineteenth centuries. Their beliefs required them to live a simple life and share all their possessions with the community. They became especially famous for their furniture designs, inspiring many of today’s designers. This quotation stuck in our minds:

“Don’t make anything unless it is both necessary and useful. And if it is, don’t hesitate to make it beautiful.” The first part of the quotation in particular determines Extremis’ design philosophy. In fact it is the extremely demanding filter that Dirk Wynants, as the firm’s creative director, applies to new developments: "We believe that before a new product is added to the market, it should earn it’s reason of existence. Simon Sinek says exactly the same like the Shakers with his ‘Golden Circle’: you have to start with a strong ‘Why’. This ‘why’ is not about adding profit, volume or turnover, it’s about what it contributes to society, what is it that will improve other people’s lives, what does it contribute that an already existing product can’t fulfill as good as this new thing you want to add to the market." The sustainability of the idea A strong ‘why’ can’t be found in design magazines, market research or by following trend watchers. This would only tell you what people would like to buy today, not what they need tomorrow. Observation

of how society evolves is where to find inspiration. The way we look at work, the importance of ownership, demographic changes, digitalization, the increasing problem of burn-outs and the reasons behind it: that is where we find what needs to be improved in a new product. Extremis likes to look far ahead, what sometimes results in new designs that most people are not ready for. These can take a rather long time before crossing the gap between the early adaptor and the first majority, but prove to have the best potential of becoming a classic, something you never get tired of looking at. Not saying being timeless, as you can’t avoid the influence of the fact that everything evolves over time. Multiple Extremis products however have proven that they are able to cope with time much better than most others do. Gargantua is from 1994, PicNik from 2002, Sticks 2004, Hopper 2010… Let’s agree that this is a lot more than average, and also that this is an important factor in sustainability, one that doesn’t get enough attention. You can’t predict if a design will become a classic over time, but with the right design methodology, chances are higher. If we’ve found our strong why, which is the most difficult part, we need to determine how we will answer that need. At that point, we are still far away from aesthetics, while a lot of new design starts with just that: the finding of a nice shape. Dirk Wynants continues: "Let’s take our Picnik as an example to explain our process. Housing in the most popular urban areas is getting smaller by the year. A small balcony is the maximum most people can get. Two people in one living unit is the most common number of persons, more than you have 1,3,4 or more. A typical building for those couples has all these small terraces filled with some furniture with such an incredible mix of shapes, that this becomes dominant over the aesthetics of the building. An unattractive view in the streets worthwhile to improve for everyone

14


Dirk Wynants:

"What is most important to me is coming up with an idea that will stay relevant for a long time. You can think about recycling and all sorts of ecological materials, but if your design only has a lifespan of three to five years, you can never call it sustainable."

passing by. So I wanted to have something for 2, in a shape that would not ask for much attention, which I thought could be achieved best by making it in a simple sheet bended in the right shape. I like to use materials in the size they come, to avoid scrap and the recycling of it. The exact half of a standard sheet of 1,5 by 3 meter is used, 2 cuts are made to make the benches. To meet the required functionality of a table with seats for 2, it could only be bend in the way we did. To add stiffness, I used the bending technique used by Xavier Lust in his previous designs, but I made it in a

15

way that we keep stackability for transport. In the end, an aesthetic emerges from a number of other decisions in completely different fields, you could say it is almost a coincidence. I strongly believe that if you work in this way, the result will always be less influenced by time." So at Extremis, we are not particularly following trends, as there is no added value in solving needs that are already answered for sufficiently. Still also our new products are harmful in a way. There is a cycle of designing, prototyping,


16


testing, introducing, promoting, failing etc… Therefore every new product should give something in return: added value, the more the better. With a longer relevancy at the same time, we get closer to our sustainability goals.

and pollution. On the other hand, a welldesigned product has a positive impact on human wellbeing. If we minimize our negative impact, and maximize our positive impact simultaneously, we hope to come to the point where we can allow ourselves to take a design to the market in a world that is oversaturated with goods.

Bad design The definition of good design is a difficult one, it will not be the same for everyone. Aesthetics are very important, we need beauty in our life for mental wellbeing, but that alone by far doesn’t make it good design. Dirk Wynants couldn’t agree more with Dieter Rams' 10 rules as a basis. Functionality, ergonomics, added value, aesthetics, durability, ecology but also economy etc… are equally important in my determination of good design. Not the average score, but the lowest one is the only to be considered when judging a product.

Slow food. Slow Design The term ‘Slow Design’ was an inevitable, perhaps slightly self-depreciating consequence of our thorough, timeconsuming design method. But it turned out that this phenomenon had already existed for several years as an alternative way of designing for a less consumption-focused society.

It is much easier to agree on what bad design is. Not respecting human (or animal) rights, bad quality, copies, pollution before and/or after the life cycle, and so on. Every consumer can see when a product is way too cheap to be true, and has the power to end the making of it by not buying it. A government should be able to judge a minimal quality before a product can enter our markets, and help the consumer in his choices. Can we think about a sustainability passport for every product? Don’t wait for this, already today all of us can take a big step towards a sustainable world: stop buying obvious crap. This is everyone’s responsibility. Why don’t we start teaching this at school, I don’t see less value in the knowledge of making better consumer choices than other stuff we teach our young people. At Extremis we don’t forget that also our products have a negative impact. The most sustainable chair is just sitting on the floor. If you don’t want that, you need to use materials, energy, there is waste

Just as Carlo Petrini’s Slow Food movement aims to grow and prepare food more sustainably by applying certain principles, a checklist has been drawn up for Slow Design with six principles that fit us down to the ground. At first we thought one of our own employees might be behind these principles, because we had been applying them long before Alistair Fuad-Luke wrote them in 2002: 1. Longer design processes with more time for research, reflection, tests in real settings and refinement: all the products in our collection have gone through an intensive design process that lasts at least two years and involves making choices, prototyping and testing. Most products were also put on ice for a while because the market was not yet ready for them or the design wasn’t quite perfect. Testing also takes a considerable amount of time, because not all accelerated tests can expose problems with materials. 2. Developing with locally and regionally available materials and production techniques to be able to employ local industry and craftspeople. All Extremis

17


products are made in Belgium, except for our very smallest product, Sticks, that is so compact to transport that its impact is ultimately minimal. 90% of our specialised suppliers are based in the West Flanders region. 3. Design that takes account of local culture and tradition as a source of inspiration and an important influence on the design result. The most striking example of this is our Hopper picnic table, which was inspired by the hop festival in Poperinge and the abundant fields of hops in our region. During this design process, the scenario

of the hop festival, with long rows of tables and benches for people to drink at and dance on, was always at the back of our minds. Of course we look to other cultures too, but if you flick through our brochures, you will immediately feel up to your ankles in polder clay... and even understand a smattering of our dialect. 4. Design that respects natural time cycles and incorporates them into the design and production process: our products are made to withstand the seasons. This is the basic requirement for Extremis products. It is fine to leave them outdoors in winter.

18


We also try to design our products in such a way that they lengthen the summer – or usable period – for their owners, so that people can enjoy the outdoors for longer.

Don’t all tables do that? Of course they do, to a certain extent, but in the design process we genuinely focus on this aspect:

What is more, one of our most important raw materials is wood. Our wood species are sustainably, ethically sourced, taking into account the natural growth cycle of the forest and the ecosystem they belong to. 5. Design that takes the sustainability of the product into account, but also human behaviour, in order to lengthen a product’s life cycle (circular economy). The ultimate goal of every design we launch is to become ‘timeless design’ or a ‘design classic’, because only then can you assume it will survive the fickleness of fashion and passing trends.

•

a round table is better for communication in the family

•

a long table is better for getting to know people in the canteen at work

•

benches should be adjustable to put children at adults’ eye level

•

our furniture is made to allow wheelchair access

•

we make seating elements just that little bit wider so that two people can share a cushion etc.

We believe that the atypical appearance of our tools for togetherness can also have a positive impact on a space. On the one hand, we play with the element of surprise and on the other hand we are devoted to aesthetics, which will always influence people’s mood.

How long the owner will want to keep the product, is extremely important. That can only be evaluated after many years, so we like to call our tools for togetherness ‘classics for the future’ . In the meantime, some of our items have already achieved design classic status. For example our Picnik, the iconic twoseater that we discussed before. The miniature version that we are now launching emphasises the timelessness of this design. 6. Design based on increasing wellbeing rather than prosperity, and which has a positive psychological effect on human beings. That is not easy to measure, but we certainly see our furniture as tools for togetherness designed to improve communication between people and bring people together.

So we don’t make any flimsy excuses for why our design process tends to take longer than other people’s. All of us are ‘slow designers’ in heart and soul, and perhaps we can summarise it like this: If you believe your product is genuinely useful, make sure its ecological impact is as small as possible by taking the time for research and development in order to extend your product’s life cycle.

19


3. Sustainability in materials Extreme sustainability – of the technical kind – is at the core of every decision about materials that we make at Extremis. Whereas the average lifespan of consumer products has now dropped below five years, it is our goal to create a counter-movement and set a new standard. In our vision, it is better to use a product for twice as long than to recycle it. Maintenance & repairability Besides the obvious decision to opt for sustainable materials, we also make a whole series of design choices to ensure that our products are easy to care for (and to repair if necessary) and that they do not age quickly. Sometimes the aging process even makes them more beautiful... A stain or little crack in the wood shouldn’t spoil the fun, and furniture should be easy to dismantle with simple tools. Not like cars nowadays. This means a tear in the fabric of a parasol or a split plank can be fixed in no time. Circularity At Extremis the principles of circularity were used since its very beginning, long before it became the new wonder word. The part of recycling is nice, not having to recycle during a longer time is a lot better. It’s about the longevity of the design itself. Circularity should also be about making the circle as big as possible How we choose materials, production techniques, and finishes A strong ‘why’ never starts with the choice

of a material or production technique. In a lot of design schools however, this would be a standard exercise. During the design process, we ask ourselves what characteristics is most important for each part. Those that come in contact with the body ideally don’t absorb too much heat or cold. Wood is perfect for this, although it still lacks softness. We will use metals for parts where structural strength is a priority. If a lot of welding is involved, we will use steel. If not, it can be aluminum under the condition you don’t need the same strength as steel for that part. For welded steel, there’s no better protection than hot dip galvanization, aluminum is perfect when powder coated, stainless steel is chosen when no or little welding is involved. All choices are made in a very pragmatic way. Don’t like the look of galvanized steel? Sorry, we refuse to add powder coating and hereby increase negative impact while lowering quality just for the sake of looks. If a customer really is getting serious about the importance of sustainability, we hope it will become easier to convince them of these well balanced choices we’ve made, which has proven to be very difficult in too many occasions. Extremis products need to be able to endure the worst outdoor conditions, making choices in materials very limited, in every sense. Making a quality product for outside is always way more expensive than a product for inside, and also much more difficult to meet sustainability goals at the same time. Sustainability and longevity can sometimes be opponents, we have to make sure we keep these in harmony. Let's have a closer look at our most used materials.

20


21


Wood Wood is the future We are all using more and more wood. Wood to warm us, for building and decorating, but also as a raw material for paper, cardboard and so on. Wood is a gift from nature. Of course we can still use wood, because it is the quintessential renewable material. After all, wood production requires four times less energy than concrete production, 60 times less than steel production and 130 times less than aluminium production. What is more, trees absorb CO2 and produce oxygen through photosynthesis. Solid wood is a blessing when it comes to CO2 storage, the more wood we use in products and architecture, the better. At the end of the product life cycle, it can be reused in other products, used for energy or just rots away and start the cycle all over again. It is not the use of wood that is destroying our forests, but inappropriate use. It speaks for itself we need to make sure our wood originates from well managed forests. Also we need to make sure we use this precious material in a way waste is minimized. If we need big or long pieces for a product, we make sure we design the need for small or short pieces at the same time. The wood is chosen to be usable in its pure form, no finishes are used or needed.

Wood is a living material, and we have to accept the consequences. Some customers expect wood to have the same stability in appearance as plastic, or want plastic to

have the same touch, feel and aesthetics as wood. We refuse to fulfill either of those. Sustainability becomes impossible when structurally perfect wood can’t be used when small cracks, inclusions, bleeding and a variety of visual appearance or color differences are not accepted. Wood doesn’t have defects, it only has character. Tropical hardwood In the last 50 years, humans have destroyed more than half of the world’s rainforests. Our atmosphere’s green lungs now only cover 6% of the Earth’s surface, but they are extremely important for regulating the climate. In fact rainforests have a significant impact on regulating rainfall all over the world, as well as removing greenhouse gases from the air. But we truly believe the choice of tropical wood can be a good one. What?! Well, we are also fighting deforestation by using certified wood. A growing market for certified wood means that a greater proportion of the forest is protected. It ensures that responsible forestry gives something back to the local population instead of taking away that wealth through reckless deforestation. We have to be very careful that the local incentive to preserve those forests will not completely disappear when the economic value of this wood is no longer there. Are we going to tell them they should not cut that tree to bring food on the table by agriculture, because we would like them to give us clean air at the other side of the world? Unlike cutting for agriculture, with good forest management, a tree cut to make nice furniture will be replaced by another one, absorbing more CO2 than the one that was fully grown. Not only the rainforest will not be saved by not using its wood, the tree you will use from anywhere else will also have a similar ecological value. The term ‘hardwood’ actually means wood from deciduous trees. This is because deciduous trees grow more slowly, which means that they are generally harder.

22


Tropical hardwood is deciduous wood that originates from warmer regions where the trees grow all year round and the wood is resistant to rot even without treatment. Hellwood What about alternatives for tropical wood? We don’t think it would be a better choice if we go for more local wood with shorter longevity, as it will shorten the life span of the product as well. We prefer not to go Nordic, not only their wood doesn’t belong to the durability class we prefer to use, also their species grow super slow. We look for a good balance in speed of growth and durability. The effect of distance is of rather less importance. To stay ahead, with a lot of endurance and patience, Extremis is always looking for new developments, certainly when it comes to new techniques to make non tropical wood more durable. A heat treatment process finally was scaled to become a useful alternative for the most durable tropical species. The extra energy this process needs is compensated by the fact that class III wood can be found closer to home, and that it increases it’s outdoor life expectations to the same as class I wood. The intense process makes this living material a little more dead, improving its stability. The search for other alternatives continues. At Extremis you will always find a number of interesting species in our test zone, and research is followed closely. Good forest management Forest certification offers guarantees that the wood (or derivative product) has a legal, sustainable origin. FSC certification exists since 1993. Extremis started using tropical hardwood with this certification from its establishment in 1994. Recently the biggest Belgian wood distributor confirmed that Extremis was the very first company to ask them for certified tropical wood, and initiated their interest for this topic. Today this company plans to offer only 100% certified wood by 2025. We are very happy

23

to hear that this shift is almost completed, thanks to a little push by Extremis! For our garden tables, chairs, benches and picnic tables, we use FSC and PEFC wood. Thanks to these quality labels, we can trace where a tree originally came from at every stage. Of course it is still a delicate matter to use wood in times of deforestation and climate change. But unlike some cheaper products, we are proud to say that our wood does not come from forests under threat, illegal logging or unstable regions. FSC certification For Gargantua, Pantagruel, Hopper, Hopper bench, Panigiri,... – products with wide planks – we have consciously chosen to offer FSC certified iroko wood. This yellowish-brown tropical wood is very stable across its breadth and has the ideal characteristics for use in these products. Iroko looks a lot like the well-known tropical wood species teak, although the latter often comes from dubious sources because it is in such high demand. A drawback of iroko is that tiny cracks can never be avoided. Treating the wood with oil helps to limit cracking. PEFC certification PEFC is a label that guarantees that a certain wood or paper comes from sustainably managed forests. PEFC stands for ‘Programme for the Endorsement of Forest Certification Schemes’, a nongovernmental environmental organisation. The PEFC system, which is represented worldwide, is active in the certification of sustainable forestry. Specifically, PEFC promotes forestry that is environment friendly, socially beneficial and economically feasible. Hellwood is our European alternative to imported tropical wood. It has an attractive dark brown colour and offers greater durability and higher damp resistance thanks to a thermal treatment. The wood is heated to at least 215°C with steam. The steam ensures that the wood does not crack or split. This treatment brings


it up to the same level of durability as class 1 hardwoods. Hellwood is stable, with improved shape retention and a very attractive colour. Hellwood also has improved resistance to damp and wood rot. The specific characteristics of Hellwood are demonstrated at their best in the Hopper table and bench combination. Hellwood is an equivalent alternative to the tropical hardwood iroko here. When exposed to wind and weather, Hellwood will turn beautifully grey, just like other hardwoods. How long does wood last Wood is an extremely precious – and expensive – raw material. That is why we do everything we can to make sure this wood lasts for many years. For example, we do not have any products at all where wood comes into contact with the ground, because that would make it rot more quickly. All our wood is supported by an underlying metal structure, so that a

tabletop or bench will never start bowing, even though the thickness of the planks (and therefore the total amount of wood used) is limited. We also strongly advise you to take good care of the wood and oil it twice a year. After considerable research and testing, we have also launched our own care products for this very purpose, with the aim of extending the life cycle of all our products. The durability of wood is expressed in classes from 1 (very durable) to 5 (not durable). The species of wood that we use are all in the highest possible class. That means they should last a minimum of 50 years under normal outdoor conditions! In theory only tropical hardwoods such as iroko and jatoba are in this highest durability class, but thermal treatment means that our H.O.T.wood also makes the grade.

the mark of responsible forestry CU-COC-809718-FF

www.pefc.org Promoting sustainable forest management

CU-PEFC-809718-FV

24


Galvanization Our second most frequently used material is steel. Table legs, table frames, chair frames, load-bearing structures... these are all areas where steel has proved to be the optimal material in the past. Outdoors, of course, steel will rust. That is why we always search for the most suitable way to protect it. Thermal galvanisation, which is also used for industrial staircases and other constructions, might not be the most attractive finish but it is the very best. For example, research has shown that galvanised steel used to build bridges would last longer than the concrete structures along our roads: up to seventy years in the wind and rain. The galvanisation process we use in many of our products is so sustainable that it even received the Cradle2Cradle certificate from the Cradle to Cradle Products Innovation Institute (San Francisco – USA) from its auditor “EPEA” in Hamburg. Cradle-to-Cradle (C2C) describes the idea of thinking in complete product cycles and thus ultimately preventing any environmentally harmful waste from being produced at all, with materials passing through a cycle as they do in nature.

25

However, the thermal application of the zinc layer is a process that consumes a lot of energy. The product’s incredibly long lifespan amply compensates for that. What is more, the steel structure is perfectly recyclable. So it’s an amazing material. It is quite controversial in our sector to use galvanisation: after all, it is a very raw, industrial technique. But we have been doing it since 1994, right back when Extremis was launched, in our first design classic Gargantua. And Gargantua owners are still coming to tell us how satisfied they are with their garden table, even after 30 years or more in the open air. At first, galvanised products have a greyishblue sheen that many people do not like. After a few months or years, however, the material becomes more matte, just like the greying wood that rests on it. This gives the entire table an even, silver-grey tone. And our customers love their tables more and more as the years go by.


4. Sustainability in aesthetics Create treasures, not just products Most values are universal and of all times, eg. togetherness. Therefore Extremis designs are based on it. A focus on popular looks instead of values, does not result in the longest shelf life. Objects that are fashionable, are not designed with how they will look like within 10 years in mind. They will get out of fashion, and depending on the use and the care, they can start to look very different, ugly even. If your choice of a partner in life is only based on beauty, the relationship will not likely last for long. Same thing here. Because we’d rather create nothing at all than put even more products with nothing to contribute onto the market, remember?

colours are often combined with wood. The wood will reveal its true personality after a while, as it starts to fade and turn silvery grey when exposed to sun and rain. Trend colours should be added rather as a decorative element, for example a cushion or something that can be replaced from time to time. Our furniture is inspired by architecture, which protects us and provides a haven for the hustle and bustle of everyday life. Furniture is a form of micro architecture, a warm cocoon where we spend time with friends and family. Just like a tool, Extremis furniture performs in silence and humility: it gathers people together, lets them relax and brings them closer to nature while the thing itself disappears into the background. The design, the colours and the materials are pure and timeless. But there is no doubt: although it is not always visible, this is indeed cutting-edge industrial design with a high-tech side.

The trouble with outdoor furniture is that usually you find it outdoors… If you happen to see a piece of design furniture for outdoors in a shop, believe us, it will change with time. This is the main expertise of our designers. Not designing a one day pitch, but designing something that looks good for a lifetime, and predict its future.

The materials are fair and are often not covered, showing their bare construction and functional beauty. They maintain their natural quality, like weathered wood, for example. When colours are applied to the designs, they are mostly matte monochromes combined with brushed or lightly structured finishes.

At Extremis, we believe that true beauty should be capable of withstanding the rigours of time and exposure to the elements. Not to mention the fact that you have better things to do with your time than cleaning and maintenance. Which is why durability is never a mere afterthought for us, but a concept that is built in to the aesthetics of each and every creation. Resulting in authentic tools for togetherness with the potential to span generations.

It’s all about balance and gut feeling. Something functional that is pleasing for the eye will have double impact: by seeing it, by experiencing it, people get into another – maybe happier – mindset. Can Extremis products do that? Up to you to judge, please let us know!

Extremis products don’t need to shout. We want our furniture to attract people, but even more to blend in any setting, during its entire lifespan. Natural materials like wood or anodised aluminium do that. Also colours do that. Our tools are designed to last longer. That’s why you won’t see very fashionable or trendy colour schemes in our bigger, most important products. These

Choose wisely The goal to improve people’s lives can only be achieved if customers are guided to the right choice, and if their expectations match reality. At Extremis we are very open to share insights on negative aspects too, knowing that we might lose sales because of this honesty. It is important that a customer is happy with this purchase, but more important that he will stay happy on the long term as well.

26


27


28


5. Sustainable business It isn’t science fiction technology that powers our headquarters, just old-fashioned common sense. Do we move with the times? We certainly do. Solar panels, ergonomic transport cranes, electric cars,... Extremis has always been pioneering in this field. But above all, we work with criticallyminded people who think about increasing efficiency and improving quality every step of the way. They are not afraid of change. For example, our regular suppliers drop in almost every day to work with us and reflect with us on the production of new series. Conversely, our technicians and purchasers hit the road daily to monitor production lines and take immediate action as soon as the slightest deviations occur. Digitisation is also helping us out, of course. The combination of all these elements makes it economically feasible to keep almost 100% of our production in Belgium at present. In the beautiful countryside around Poperinge. These are the main elements of our sustainable business: Business model Where can we make most difference at Extremis? In design of course, so that’s where our in-house focus is and stays. We will never become a better manufacturer than the specialized suppliers we have chosen to work with. For every component we find the best production fit to make that very item in the best way possible regarding price, quality, quantity and sustainability. This gives a lot more freedom in design choices as we don’t have to worry about expensive machines that need to be fed with work. Outsourcing production doesn’t mean outsourcing problems, on the contrary. But only this way we can freely choose the supplier that has the best production techniques, performant machinery, skills, capacity and experience

29

for every component separately. If scaling up production volumes or new availability of production techniques ask for change, there are no heavy investments that would not allow this. To maintain quality control and flexibility under control, light assembly and packaging is the only thing that is done in-house on the production side, next to some prototyping to support product development. We don’t do super mass production, and then hope someone will buy it. Unlike fashion, every piece that is made is effectively sold. Still it is important to keep a level of industrialization, as it has strong benefits on economic, but also ecologic level. But consumers have different desires, they need to be able to choose. At Extremis a huge variety of choices are offered, while keeping standardization. This can only be done by integration in the design process from the very beginning. Smart choices, clever solutions, multi-functionality, are all essential to solve this. In the future, the continuous development of our business model needs to stay top of mind, to take all opportunities to lower our negative impact. Carefully made in Belgium Manufacturing in Belgium has its drawbacks. Labour is expensive. That has an inevitable impact on the selling price. Consequently, it makes us less competitive on the international market. So why don’t we move our production abroad? To be honest, we have done. But let us tell you why there is one exception to the all-Belgian rule in our range: Sticks. This space divider or windbreak consists of a block of rubber or wood, for the outdoor and indoor versions respectively. Vertical sticks are slotted into it at certain intervals. That creates a tangle of sticks that is partly transparent but still visually defines a space and creates privacy. The rubber bases are made in Sri Lanka. That is where the raw material – natural rubber – is extracted on rubber plantations. We employ local people to turn it into a finished


design product. We believe it is only fair to use local labor as well. Since the sticks are only slotted in when the product reaches the final customer, the rubber bases are packed in Sri Lanka and shipped to the port of Antwerp. We have put a lot of thought into this process to ensure that this transport volume is no greater than the original volume of the raw material. That keeps the ecological impact of transporting this product low. What is more, the local processors offer excellent quality. That means we can limit quality control in Belgium to sample testing. The indoor version of that rubber base of the Sticks product is made in rubber wood, to make sure a tree that ends its productive cycle is used in a good way as well. We could buy the fiberglass rods for that same product in that part of the world too, and they would be cheaper. But here it is the opposite story: they don’t have the materials there and have to buy them in Europe, and ship the finished rods back. This is so contrary to our common sense that we just don’t do that. For all our other products, production abroad is no option as it does not meet our conditions for minimal transport volumes or our high quality requirements. Clearly quality control is much easier with companies located within a radius of 50 kilometres from Extremis. And that is true of 80% of our suppliers. We also greatly limit the impact of transportation through our selection of suppliers. All the semi-finished goods are stored at our site in Poperinge. After a quality check, they are packed in their transport packaging – which is often ingeniously compact – to be sent to the final customer. Another exception needs to be made for components for which we simply don’t have local suppliers for anymore. Confection and casting of metals for example. Still, most of the time the production of these are still done in the European territory. There is no desire or plan to change our supply chain to the lower cost countries. Extremis priorities sustainability goals, and

we believe our future lies in quality, not in quantity anyway. Shipping Is it more sustainable to serve your local market only instead of distributing worldwide? Difficult to measure! Who can tell if a local tomato from a heated green house is more or less harmful than one that needs no heating but more transport? Being in a niche of a niche market, being seasonal as well, Extremis can never keep a sustainable level if products have to stay local. But that doesn’t mean we can’t do a whole lot to compensate. For the Americas, we are installing a production plant near Grand Rapids, in order to minimize transport for the local resources and deliver products more efficiently. Location Extremis is based as far as you can get from the biggest cities in Flanders, which has some downsides. Between the hops fields, however, you will find the nicest environment to spend working hours, surrounded by nature, clean air and silence. We always try to find employees who live as close as possible, and if we need talent that lives a bit further away, they are always completely spared from traffic jams in both directions. International visitors can easily reach Extremis, being based in the center of the 4 most important European airports: London, Paris, Amsterdam and Frankfurt. High speed train connections hopefully will be further improved in the near future. A truly innovative company doesn’t show this in the products only, it is an attitude that influences choices on all levels of business operations. Both Extremis and my design office DWDW are housed in renovated buildings, so no extra land was taken. DWDW is completely fossil fuel free, with solar panel driven geothermic heat pumps. At Extremis everything is made ready to make this final step, therefore floor heating is used throughout all working areas. This gives the ultimate comfort to both white and blue collar employees. Car fleet

30


Our car fleet has been electrified starting from 2012, while solar panels were installed at both Extremis and DWDW. Over a decade later the switch to electric is completed, and 10 charging points were installed for public use. In a next step more solar panels will be added to become completely fossil fuel free at Extremis HQ as well. Biophilic design Music is provided through high quality speakers, to achieve the best atmosphere at low volume. Our office spaces are designed with the patterns of biophilic design in mind, to create the healthiest work environment, with natural light, spectacular views, outdoor working spaces, height, materials, acoustics, in- and outdoor animals, water and safety. The orientation and architecture is chosen in a way that

31

awnings become unnecessary, to make sure views don’t have to be hidden in sunny weather conditions. Biophilic design is not only very present at both HQ’s. Next to all other sustainability aspects, it is the main driver in the creation of Extremis designs, as an essential aspect in the ambition to improve life quality. Inclusion When hiring at Extremis, we are blind for every aspect that makes people different from each other. Whenever possible, work is outsourced to specialized companies who employ people with a distance from regular jobs.


EDITOR Dirk Wynants Design Works info@dwdw.be LAY-OUT Extremis PUBLISHER Extremis – Hilde Louwagie hilde@extremis.be EXTREMIS Couthoflaan 20b 8972 Poperinge – BELGIUM +32 57 346020 info@extremis.com www.extremis.com BE THE FIRST TO KNOW Facebook Linkedin Pinterest Instagram Vimeo

IMAGES Beeldcollectief Hilde Verbeke Verne Skinn Studionunu All rights reserved. Unless otherwise specified, all designs and photographs contained in this publication are copyright protected and are the property of Extremis. No part of this publication may be copied or distributed without Extremis’ prior written consent. The names of the authors of photographs to which we do not hold rights are mentioned here. We have done our utmost to provide a comprehensive list of names. In the event of an alleged breach, please contact the editorial staff. © Extremis


Turn static files into dynamic content formats.

Create a flipbook