Vertical Mini CNC Mills Vibration Dampers 73,126

l Linear guides on all axes l All axes with ball screws l Servo drive on all axes (X, Y and Z axis) l Tool change at the push of a button (electropneumatic tool clamping device) l Coolant equipment l Central lubrication l Swivelling control panel l Software package "SINUMERIK 808D on PC" included. l Including two years SIEMENS warranty

l Siemens Sinumerik 808D Advanced Controller

0353-6107

1 pc. Face milling holder 22mm 1 pc. chuck 2 pc. Weldon 6 mm 1 pc. Weldon 8,10,12 & 16 2 pc. Weldon 20 mm 1 pc. adaptor BT 30 x 2MT 3 pcs. Collet chuck holder ER32 1 pc. spring collet spanner ER 32 18-part spring collet set ER 32 1 pc. Tool height adjuster 1 pc. assembly and tool adjustment gauge 14 pcs. pull studs 1 pc. taper cleaning tool

Electrical Connection 400V 3Ph 50Hz Rapid Motion X,Y Z axis 8,000 mm/min Total Connected Load 3.125 KVA X axis Motor Torque 2.4 Nm Drive Motor S1 op 1.5 kW Y axis Motor Torque 2.4 Nm Torque Drive motor S1 10 Nm Z axis Motor Torque 2.4 Nm Spindle Taper BT30 Spindle Speed Range 90 - 4,000 rpm Coolant Pump Motor 95W Compressed Air 8 Bar Coolant Tank Cap. 25 Litres Spindle to Table 20 - 300 mm Repeat Accuracy ± 0.025 mm Table Length x Width 620 x 180 mm Positioning Accuracy ± 0.025 mm T-Slot / Amount / Dist. 12mm/3/50mm X axis Travel 355 mm Max Load Bearing Cap. 30 Kg Y axis Travel 190 mm Dims LxWxH cm 160 x 145 x 201 Z axis Travel 245 mm Weight 1400 Kg