Etag Evolution Fasteners Insulation Guide 2021

VE

RS

IO

N

1.0

20 21

INSULATION FIXINGs GUIDE

WE HAVE A RANGE OF PROMOTIONAL FLYERS AND INFORMATIVE HAND OUTS also AVAILABLE

Sales and Customer Service Tel: +44 (0) 141 647 7100 Fax: +44 (0) 141 647 5100 Email: sales@evolutionfasteners.co.uk

C O N T E N T S

INSULATION FIXINGS

PAGE

SELF DRILLING INSULATION SCREWS - PHILLIPS/TORX

6

SELF-DRILLING INSULATION SCREWS – A4 STAINLESS STEEL

7

INSULATION ANCHORS

8

HEAVY DUTY ROOFING SCREWS

9

COMPOSITE PANEL - TEK® 3

10

A2/A4 STAINLESS COMPOSITE SCREWS

11

A4 BI-METAL MASONRY SCREW

12-13

SELF TAPPING MASONRY SCREW

14-15

CEMENTITIOUS BOARD SCREWS

16

TIMBER TEK

17

A2 STAINLESS BI-METAL WING-DRILL TEK SCREW

18

SELF-DRILLING CEMENTITIOUS BOARD SCREW

19

STRESS PLATES

20

INSULATION RETAINING WASHERS

21

PANEL-FIX

22

4

C O N T E N T S

TECHNICAL INFORMATION SPECIFICATIONS AND LABORATORY SERVICES

FIXING FINDER FIXING INSULATION PRODUCTS TO STEEL AND TIMBER SUBSTRATES IN INTERNAL AND EXTERNAL APPLICATIONS

PIR, PUR, XPS, EPS, PF AND PE INSULATION BOARDS GLASS, ROCK, STONE AND MINERAL WOOL ROLLS, BATTENS, MATTRESSES AND BOARDS FIXING STRUCTURAL, TRAPEZOIDAL, INSULATION PANELS WITH STEEL OR ALUMINIUM FASCIA’S FOR WALLS, ROOFING AND CLADDING

INDEX

PAGE

24-25

PAGE

26-44

26-31 32-33 34-44

46-47

E&OE

HOW TO USE THIS GUIDE

ICON KEY

BRICK

CONCRETE

STEEL

TIMBER

SOFFIT INSULATION RETENTION

GLASS AND MINERAL WOOL INSULATION SYSTEMS

WARM ROOF AND DEEP INSULATION SYSTEMS

EXTERNAL WALL INSULATION (EWI) SYSTEMS 5

INSULATION FIXINGS

Self Drilling Insulation - Phillips/Torx

Product Range Designed For:

Fixing insulation to steel and timber purlins

Head Style:

Phillips 2/Torx 25

Drive:

Single

Thread Form:

AISI C1022

Material Grade:

500hr EvoshieldÂŽ

Coating:

Steel drilling capacity 0.7-2.0 mm

Recommended Drill Speed:

1,500 - 2,500 RPM

Technical Data Hardness Rating (Vickers scale) Diameter

Surface Hardness

Core Hardness

4.8mm

611.7HV

492.0HV

Ultimate Mechanical Performance Diameter

Tensile Strength

Shear Strength

4.8mm

11.23kN

7.7kN

Ultimate pull out values Diameter

Drill point

4.8mm

Tek 2

Steel Thickness 0.6mm

1.2mm

2.5mm

0.85kN

2.25kN

5.38kN

Ultimate pull out values (C16 grade timber) Diameter

Drill point

4.8mm

Tek 2

6

Phillips CODE

SIZE

BOX

IS60 IS80 IS100 IS110 IS120 IS130 IS140 IS150 IS160 IS170 IS180 IS190 IS200 IS220 IS240 IS260 IS280 IS300

4.8 x 60mm 4.8 x 80mm 4.8 x 100mm 4.8 x 110mm 4.8 x 120mm 4.8 x 130mm 4.8 x 140mm 4.8 x 150mm 4.8 x 160mm 4.8 x 170mm 4.8 x 180mm 4.8 x 190mm 4.8 x 200mm 4.8 x 220mm 4.8 x 240mm 4.8 x 260mm 4.8 x 280mm 4.8 x 300mm

200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100

4.8 x 120mm 4.8 x 140mm 4.8 x 160mm 4.8 x 180mm 4.8 x 200mm

200 200 200 200 100

Torx T25IS120 T25IS140 T25IS160 T25IS180 T25IS200

Fixing Finder Pages - 28,29,32

Embedment depth 25.0mm

35.0mm

1.90kN

4.00kN

Tel: +44 (0)141 647 7100

Fax: +44 (0)141 647 5100

INSULATION FIXINGS

Self-Drilling Insulation Screws Bi-metal – A4 Stainless Steel Product Range Designed For:

Fixing insulation to light gauge steel or timber substrates.

Also suitable where dissimilar metals are being used or superior corrosion resistance is required

Head Style:

Philips No. 2/ Bugle Head

Thread Form:

Coarse thread (Pitch = 1.8mm (approx.)

Material Grade:

SAE C1022 Carbon Steel – Drilling point AISI 316/ EN 1.4401 (A4) Stainless Steel – shank and head

Coating:

5µm electroplated Zinc.

Recommended Steel drilling capacity 0.7-2.0 mm Drill Speed: 1,500 - 2,500 RPM z

CODE

SIZE

BOX

A4IS45 A4IS60 A4IS80 A4IS100 A4IS120 A4IS140

4.8 x 45mm 4.8 x 60mm 4.8 x 80mm 4.8 x 100mm 4.8 x 120mm 4.8 x 140mm

100 100 100 100 100 100

A4IS160

4.8 x 160mm

100

A4IS180 A4IS200 A4IS240

4.8 x 180mm 4.8 x 200mm 4.8 x 240mm

100 100 100

1

Technical Data Hardness Rating (Vickers scale) Diameter

Surface Hardness

Core Hardness

4.8mm

492.8HV

482.3HV

2

Ultimate Mechanical Performance Diameter

Tensile Strength

Shear Strength

4.8mm

7.90kN

5.41kN

3

Ultimate pull out values Diameter

Drill point

4.8mm

Tek 2

Steel Thickness 0.6mm

1.2mm

2.5mm

0.78kN

2.07kN

4.71kN

Ultimate pull out values (timber) Diameter

4.8mm

Embedment depth

Drill point

25.0mm

35.0mm

Tek 2

1.76kN

3.83kN

sales@evolutionfasteners.co.uk

Fixing Finder Pages - 30,31,33

www.evolutionfasteners.co.uk

7

INSULATION FIXINGS

Insulation Anchors Galvanised Insulation Anchors / A2 Stainless Steel Insulation Anchors

Product Range CODE

SIZE

BOX

80mm 90mm 110mm 140mm 170mm 200mm 240mm

50 50 50 50 50 50 50

Galvanised GIA 880 GIA 890 GIA 8110 GIA 8140 GIA 8170 GIA 8200 GIA 8240

Designed For:

Fixing rigid insulation boards and mineral wool insulation to blockwork, brickwork or concrete substrates in C1 and C2 internal corrosion environments

Head Style:

40mm ØD compression disk

Material Grade:

SAE 1080 spring steel (non-hardened)/ AISI 304 / EN 1.4301/ A2-70 stainless steel

Coating:

HD Galvanised - Z140 (pursuant to EN 10346)/None

Fire Classification:

A1 (pursuant to EN 13501-1)

A2 Stainless Steel A2GIA110 A2GIA140 A2GIA170

110mm 140mm 170mm

50 50 50

Technical Data Pull Out Data Embedment Depth (Mm)

8

Product code

Nominal Diameter (mm)

35.00

40.00

45.00

GIA80

08.00

0.7kN

0.7kN

1.0kN

GIA90

08.00

0.7kN

0.7kN

1.0kN

GIA110

08.00

0.7kN

0.7kN

1.0kN

GIA140

08.00

0.7kN

0.7kN

1.0kN

GIA170

08.00

0.7kN

0.7kN

1.0kN

GIA240

08.00

0.7kN

0.7kN

1.0kN

A2GIA110

08.00

0.7kN

0.8kN

1.0kN

A2GIA140

08.00

0.7kN

0.8kN

1.0kN

A2GIA170

08.00

0.7kN

0.8kN

1.0kN

Tel: +44 (0)141 647 7100

Fixing Finder Pages - 28 - 33 Fax: +44 (0)141 647 5100

INSULATION FIXINGS

Heavy Duty Roofing Screw

Product Range

Designed For:

Fixing insulation and single ply membrane to plywood, timbers, steel decking and concrete. *

Head Style:

Dome Head (Pan)

Drive:

PH3

Thread Form:

Coarse single thread

Material Grade:

AISI C1022

Coating:

500hr Evoshield®

Technical Data

CODE

SIZE

BOX

ERS76 ERS100 ERS127 ERS152 ERS176 ERS200 ERS225 ERS250

76 mm 100 mm 127 mm 152 mm 176 mm 200 mm 225 mm 250 mm

100 100 100 100 50 50 50 50

H EAVY DUTY, M ULTI-PURPOSE ROOFI NG SCREW

Hardness Rating (Vickers scale) Diameter

Surface Hardness

Core Hardness

5.5mm

581.1 HVO.3

438.8 HVO.3

Ultimate Mechanical Performance Diameter

Tensile Strength

Shear Strength

6.3mm

18.6kN

7.3kN

Ultimate pull out values (unfactored) Substrate Steel

Concrete (C35)

Thickness (mm)

Timber (C16)

Embedment (mm)

0.6

1.2

25.0

35.0

25.0

35.0

2.4kN

4.3kN

8.7kN

13.9kN

7.1kN

10.5kN

sales@evolutionfasteners.co.uk

CALL TO PLACE ORDER T: +44 (0)141 647 7100 E: sales@evolutionfasteners.co.uk

www.evolutionfasteners.co.uk

9

INSULATION FIXINGS

Composite Panel - TEK® 3 – 16mm/19mm Washer 1.2mm - 3.5mm Steel Thickness

Product Range CODE Designed For -

Fixing cladding and roofing applications to hot and cold rolled purlins/rails Fastening liner panels and general components to steel

Head Style -

Hexagonal

Drive -

5/16” hexagonal

Washer -

16mm/ 19mm Ø bonded EPDM

Thread Form -

Coarse thread (Tek 3)

Shank Material -

Carbon steel

Material Grade -

SAE C1022

Coating -

500Hr EvoShield®

Hardness Rating (Vickers scale) Surface Hardness

Core Hardness

5.5mm

550.0HV

465.0HV

16mm washer TSBWHT5.5-80-3

5.5 x 80mm

100

16mm

TSBWHT5.5-105-3

5.5 x 105mm

100

16mm

TSBWHT5.5-115-3

5.5 x 115mm

100

16mm

TSBWHT5.5-135-3

5.5 x 135mm

100

16mm

TSBWHT5.5-150-3

5.5 x 150mm

100

16mm

TSBWHT16-5.5-185-3

5.5 x 185mm

100

16mm

TSBWHT19-5.5-80-3

5.5 x 80mm

100

19mm

TSBWHT19-5.5-105-3

5.5 x 105mm

100

19mm

TSBWHT19-5.5-135-3

5.5 x 135mm

100

19mm

TSBWHT19-5.5-150-3

5.5 x 150mm

100

19mm

TSBWHT19-5.5-185-3

5.5 x 185mm

50

19mm

TSBWHT19-5.5-225-3

5.5 x 225mm

50

19mm

TSBWHT19-5.5-240-3

5.5 x 240mm

50

19mm

TSBWHT19-5.5-275-3

5.5 x 275mm

50

19mm

TSBWHT19-5.5-300-3

5.5 x 300mm

50

19mm

Composite Panel for Timber CODE

SIZE

BOX

TSBWHT6.3-80-GP

6.3 X 80mm

100

TSBWHT6.3-100-GP

6.3 X 100mm

100

TSBWHT6.3-125-GP

6.3 X 125mm

100

TSBWHT6.3-150-GP

6.3 X 150mm

100

Unfactored Mechanical Performance Diameter

Tensile Strength

Shear Strength

5.5mm

16.5kN

10.3kN

Pullover Performance Diameter

In 0.6mm steel

In 1.2mm steel

5.5mm

3.1kN

6.0kN

Ultimate pull out values

Fixing Finder Pages - 35 - 39

Steel Thickness

Diameter

Drill point

1.2mm

1.6mm

2.0mm

2.5mm

3.0mm

4.0mm

5.5mm

Tek 3

1.7kN

2.1kN

2.7kN

4.6kN

4.8kN

5.5kN

10

BOX WASHER SIZE

19mm washer

Technical Data

Diameter

SIZE

Tel: +44 (0)141 647 7100

Fax: +44 (0)141 647 5100

INSULATION FIXINGS

A2/A4 Stainless Steel Bi-metal Composite Panel 1.2mm - 3.5mm Steel Thickness

Product Range CODE

SIZE

BOX

WASHER SIZE

A2 BMHT12-5.5-105-3

5.5 x 105mm

100

12mm

Use in brick-tie channel systems and for fastening aluminium sheeting and panels

BMHT12-5.5-135-3

5.5 x 135mm

100

12mm

BMHT12-5.5-150-3

5.5 x 150mm

100

12mm

BMHT12-5.5-185-3

5.5 x 185mm

100

12mm

Head Style -

Hexagonal

BMTSBWHT5.5-80-3

5.5 x 80mm

100

16mm

Drive -

5/16” hexagonal

BMTSBWHT5.5-105-3

5.5 x 105mm

100

16mm

Washer -

16mm Ø bonded EPDM

BMTSBWHT5.5-135-3

5.5 x 135mm

100

16mm

BMTSBWHT5.5-150-3

5.5 x 150mm

100

16mm

Thread Form -

Coarse thread

Shank Material -

Stainless steel

Material Grade -

AISI 304/ EN 1.4301

Coating -

(A2) or AISI 316/ EN 1.4401 (A4) Electroplated zinc

Designed For -

Hardness Rating (Vickers scale) Surface Hardness

Core Hardness

5.5mm

465.6 HV0.3

323.7 HV0.3

Diameter

In 1.2mm steel

5.5mm

2.4kN

8.1kN

100

16mm

5.5 x 185mm

50

16mm

BMTSBWHT5.5-185-3

5.5 x 185mm

50

19mm

BMTSBWHT5.5-235-3

5.5 x 235mm

50

19mm

BMTSBWHT5.5-275-3

5.5 x 275mm

50

19mm

A4BMHT105-3

5.5 x 105mm

100

16mm

A4BMHT135-3

5.5 x 135mm

100

16mm

A4BMHT150-3

5.5 x 150mm

100

16mm

A4BMHT185-3

5.5 x 185mm

100

19mm

A2 Heavy Section Bi-Metal

Pullover Performance In 0.6mm steel

5.5 x 165mm

A4

Technical Data

Diameter

BMTSBWHT5.5-165-3 BMTSBWHT16-5.5-185-3

BMTSBWHT5.5-105-5

5.5 x 105mm

100

16mm

BMTSBWHT5.5-125-5

5.5 x 125mm

100

16mm

BMTSBWHT5.5-150-5

5.5 x 150mm

100

19mm

BMTSBWHT5.5-185-5

5.5 x 185mm

50

19mm

BMTSBWHT5.5-245-5

5.5 x 245mm

50

19mm

Tek 5 range – unfactored pull out values Steel Thickness

Diameter

Drill point

4mm

5mm

6mm

8mm

10mm

12.5mm

5.5mm

Tek 5

6.4kN

7.7kN

10.1kN

11.4kN

12.3kN

12.8kN

Tek 3 range – unfactored pull out values

Fixing Finder Pages - 40 - 44

Steel Thickness

Diameter

Drill point

1.2mm

1.6mm

2.0mm

2.5mm

3.0mm

4.0mm

5.5mm

Tek 3

1.7kN

2.1kN

2.5kN

3.3kN

4.1kN

5.4kN

sales@evolutionfasteners.co.uk

www.evolutionfasteners.co.uk

11

INSULATION FIXINGS

A4 Bi-Metal Stainless Steel Masonry Screw Product Range CODE Designed For:

Fixing timber battens, trunking, track and general components into concrete, masonry and timber

SIZE

BOX QUANTITY

Hexagonal Headed A4HH6.3-32-GP

6.3mm x 32mm

100

Head Style:

5/16� hexagonal head/ Countersunk

A4HH6.3-45-GP

6.3mm x 45mm

100

A4HH6.3-57-GP

6.3mm x 57mm

100

Shank Material:

Stainless Steel

A4HH6.3-70-GP

6.3mm x 70mm

100

A4HH6.3-82-GP

6.3mm x 82mm

100

AISI 316/ A4

A4HH6.3-100-GP

6.3mm x 100mm

100

A4HH6.3-125-GP

6.3mm x 125mm

100

A4HH6.3-140-GP

6.3mm x 140mm

100

Material Grade:

Countersunk Headed

Technical Data

A4CSK6.3-45-GP

6.3mm x 45mm

100

A4CSK6.3-57-GP

6.3mm x 57mm

100

A4CSK6.3-75-GP

6.3mm x 75mm

100

Hardness Rating (Vickers scale) Diameter

Surface Hardness

Core Hardness

6.3mm

577.4 HV0.3

465.1 HV0.3

1

Unfactored Mechanial Performance Diameter

Tensile Strength

Shear Strength

6.3mm

18.7kN

8.9kN

Ultimate pull out loading from steel

2

Steel substrate (S275 JR mild steel) Major diameter

Steel thickness

Steel thickness

Steel thickness

6.3mm

0.7mm

1.0mm

1.2mm

Force

1.0kN

1.4kN

2.0kN

3

Ultimate pull out loading from timber Major diameter

Timber grade

Embedment depth

Load

6.3mm

C16

25.0mm

2.3kN

6.3mm

C16

35.0mm

3.7kN

Fixing Finder Pages - 30,33 12

Tel: +44 (0)141 647 7100

Fax: +44 (0)141 647 5100

INSULATION FIXINGS

Technical Data Ultimate Loading: Withdrawal Resistance (Concrete and Masonry Substrates) Embedment Depth (mm)

C25/30 Concrete (30N/mm2)

Aerated Concrete Block (7N/mm2)

Class A Engineering Brick (75 N/mm2)

25.0

2,850 N

650 N

3,690

35.0

6,890 N

1,010 N

9,670

Characteristic/ Safe Loading: Withdrawal Resistance (Concrete and Masonry Substrates, γ = 3.0) Embedment Depth (mm)

C25/30 Concrete (30N/mm2)

Aerated Concrete Block (7N/mm2)

Class A Engineering Brick (75 N/mm2)

25.0

950 N

210 N

1,230

35.0

2,290 N

330 N

3,220

Concrete and masonry setting information Substrate type

Category

Data

All

Nominal embedment depth

35.0mm

Non cracked concrete (>30N/mm2)

Minimum base material thickness Minimum screw spacing Minimum edge distance

100.0mm 55.0mm 55.0mm

Cracked concrete (>30N/mm2)

Minimum base thickness Minimum screw spacing Minimum edge distance

100.0mm 40.0mm 55.0mm

Influence of Compressive Strength on Withdrawal Resistance (Reduction Factors) Nominal Anchor Diameter (mm)

Drill Hole Diameter (mm

Embedment Depth (mm)

6.3

5.15

6.3

5.15

Compressive Strength – Cube (EN 1992) C20/25

C25/30

C30/37

C35/45

C40/50

C45/55

≥C50/60

25/0

0.6

1.0

1.0

1.0

1.2

1.2

1.3

35.0

0.7

1.0

1.1

1.2

1.3

1.4

1.5

Influence of edge distance on loadings (reduction factor) Percentage of stated minimum

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

Reduction factor

N/A

N/A

N/A

N/A

N/A

0.75

0.80

0.85

0.90

1.00

sales@evolutionfasteners.co.uk

www.evolutionfasteners.co.uk

13

INSULATION FIXINGS

Self Tapping Masonry Screw

Designed For:

Fixing timber battens, trunking, track and general components to concrete and masonry substrates

Head Style:

Countersunk or slotted hexagonal.

Material Grade:

SAE C1022 Carbon steel.

Coating:

EvoShield® 500Hr NSST resistant (Aluminium/ Zinc flake bound in resin).

Drive bit:

Phillips No. 2 or No.3 female socket, or, 5/16” hexagonal male socket (with slot).

Point:

Nail (pyramidal).

2

3 MSCSK

MSHH

1

Product Setting Details Substrate Type

Parameter

All types

Non-Cracked Concrete (> 20 MPa < 80 MPa)

Screw Nominal Diameter, dnom (mm) 4.8

6.3

Nominal Embedment Depth, h1 (mm)

25

25

Nominal Drill Hole Diameter, d0 (mm)

4.35

5.15

Clearance Hole Diameter, df (mm)

6

8

Installation Torque, τinst (Nm)

< 3.0

< 7.0

Minimum Member Thickness, hc (mm)

100

100

50

55

Minimum Member Thickness, hmin (mm)

100

100

Minimum Edge Distance, cmin (mm)

50

40

Minimum Spacing, smin (mm)

50

55

Minimum Edge Distance, cmin (mm) Minimum Spacing, smin (mm)

Cracked Concrete (> 20 MPa < 80 MPa)

14

Tel: +44 (0)141 647 7100

Fax: +44 (0)141 647 5100

INSULATION FIXINGS

Product Range Fixture Limitations CODE

Nominal Dimensions (mm)

Min. Thickness, tmin (mm)

Max. Thickness, tmax (mm)

Hexagonal Headed MSHH6.3-32-516 MSHH6.3-45-516 MSHH6.3-57-516 MSHH6.3-70-516 MSHH6.3-82-516 MSHH6.3-100-516 MSHH6.3-125-516 MSHH6.3-140-516 MSHH6.3-160-516 MSHH6.3-180-516 MSHH6.3-200-516 MSHH6.3-254-516

6.3 x 32 6.3 x 45 6.3 x 57 6.3 x 70 6.3 x 82 6.3 x 100 6.3 x 125 6.3 x 140 6.3 x 160 6.3 x 180 6.3 x 200 6.3 x 254

0 0 0 30 45 55 75 80 100 120

7 20 32 45 57 75 100 105 125 145

140 190

165 215

Countersunk Headed MSCSK4.8-32-2 MSCSK4.8-45-2 MSCSK4.8-57-2 MSCSK4.8-70-2 MSCSK4.8-82-2 MSCSK4.8-100-2 MSCSK6.3-32-3 MSCSK6.3-45-3 MSCSK6.3-57-3 MSCSK6.3-70-3 MSCSK6.3-82-3 MSCSK6.3-100-3 MSCSK6.3-125-3 MSCSK6.3-150-3

4.8 x 32 4.8 x 45 4.8 x 57 4.8 x 70 4.8 x 82 4.8 x 100 6.3 x 32 6.3 x 45 6.3 x 57 6.3 x 70 6.3 x 82 6.3 x 100 6.3 x 125 6.3 x 150

0 0 0 30 45 55 0 0 0 30 45 55 75 100

7 20 32 45 57 75 7 20 32 45 57 75 100 125

Fixing Finder Pages - 28 - 29

sales@evolutionfasteners.co.uk

www.evolutionfasteners.co.uk

15

INSULATION FIXINGS

Cementitious Board Screws

Product Range Designed For:

Fixing cementitious and other dense boards to timber and metal substrates

Head Style:

Double countersunk with nibs

Recess type:

Phillips No. 2

Thread Type:

Patent (pending) Evolution Universal Thread Carbon steel

Material Grade:

C1022

Coating:

1,000Hr EvoShieldÂŽ

CODE

SIZE

EVOSHIELD COATING

BOX

WHX32

4.2 x 32 mm

200

WHX42

4.2 x 42 mm

200

WHX60

4.2 x 60 mm

200

WHX80

4.2 x 80 mm

200

WHX100

4.2 x 100 mm

200

WHL08114

4.2 x 32 mm

200

WHL08158

4.2 x 42 mm

200

Technical Data Bi-metal tip for attaching board to wood stud or metal stud

Hardness Rating (Vickers scale) Diameter

Surface Hardness

Core Hardness

4.2mm

553.6HV

414.0HV

Unfactored Mechanical Performance Diameter

Tensile Strength

Shear Strength

4.2mm

6.9kN

5.0kN

Unfactored pull out values (metallic substrate) Diameter 4.2mm

Drill Point Tek 2

Steel Thickness 1.2mm

1.8mm

2.5mm

1.6kN

1.9kN

3.8kN

High and low thread for stable driving Large wafer head with ribs allows good countersink and clamps the board firmly

Ultimate Pull Out Loads (kN) in C16 Timber Diameter 4.2mm

16

Embedment Depth 15mm

30mm

50mm

1.9 kN

2.7 kN

3.2 kN

Tel: +44 (0)141 647 7100

Fixing Finder Pages - 28

Fax: +44 (0)141 647 5100

INSULATION FIXINGS

Timber Tek

Product Range

Designed For:

Fixing timber or composites to steel

Head Style:

Countersunk ot countersunk with nibs

Drive:

Phillips® No. 2 or No. 3

Thread Form:

Coarse thread (Tek 3)

Shank Material:

Carbon steel

Material Grade:

SAE C1022

Coating:

Wing drill Tek 3 range - for light steel

500Hr EvoShield®

Technical Data Tek 3 range – Unfactored pull out values

CODE

SIZE

EFFECTIVE THREAD LENGTH

TSTF4.2-38-3

4.2x38mm

22mm

TSTF4.8-38-3

4/8x38mm

22mm

TSTF4.8-45-3

4.8x45mm

27mm

TSTF5.5-50-3

5.5x50mm

30mm

TSTF5.5-62-3

5.5x62mm

40mm

TSTF5.5-80-3

5.5x80mm

60mm

TSTF5.5-100-3

5.5x100mm

80mm

TSTF5.5-120-3

5.5x120mm

100mm

TSTF5.5-150-3

5.5x150mm

130mm

TSTF5.5-180-3

5.5x180mm

155mm

Wing drill Tek 4 range for medium gauge steel

Steel Thickness

4.2mm

Drill point Tek 3

1.0kN

1.2kN

1.9kN

3.5kN

3.9kN

4.8kN

4.8mm

Tek 3

1.1kN

1.5kN

2.5kN

3.6kN

3.9kN

4.4kN

5.5mm

Tek 3

TSTF6.3-60-4

6.3x60.0mm

FULL

1.2kN

2.3kN

3.0kN

4.0kN

4.6kN

5.7kN

TSTF6.3-85-4

6.3x85.0mm

FULL

Diameter

1.2mm

1.6mm

2.0mm

2.5mm

3.0mm 4.0mm

CODE

SIZE

EFFECTIVE THREAD LENGTH

Tek 4 range – Unfactored pull out values Diameter

Drill point

6.3mm

Tek 4

Steel Thickness 2.5mm

3.0mm

4.0mm

5.0mm

6.0mm

4.1kN

4.7kN

5.9kN

6.4kN

7.2kN

CODE

SIZE

EFFECTIVE THREAD LENGTH

TSTF5.5-42-5

5.5x42mm

13mm

Steel Thickness

TSTF5.5-65-5

5.5x65mm

28mm

TSTF5.5-85-5

5.5x85mm

50mm

TSTF5.5-100-5

5.5x100mm

65mm

Tek 5 range – Unfactored pull out values Diameter

Drill point

4.0mm

5.0mm

6.0mm

8.0mm 10.0mm 12.5mm

5.5mm

Tek 5

4.2kN

9.8kN

10.4kN

11.7kN

Hardness Rating (Vickers scale) Diameter

Surface Hardness

Core Hardness

4.2mm

582.6HV

477.8HV

4.8mm

570.0HV

474.1HV

5.5mm

592.1Hv

478.8HV

6.3mm

587.4 HV0.3

468.9 HV0.3

Wing drill Tek 5 range - for heavy steel

12.5kN

13.8kN

Ultimate Mechanical Performance Diameter

Tensile Strength

Shear Strength

4.2mm

10.4kN

5.2kN

4.8mm

12.4kN

6.4kN

5.5mm

20.1kN

10.3kN

6.3mm

22.7kN

15.2kN

sales@evolutionfasteners.co.uk

TSTF5.5-110-5

5.5 x 110mm

75mm

TSTF5.5-135-5

5.5x135mm

100mm

TSTF5.5-150-5

5.5x150mm

115mm

TSTF5.5-180-5

5.5x180mm

145mm

Fixing Finder Pages - 28,29,32

www.evolutionfasteners.co.uk

17

INSULATION FIXINGS

A2 Stainless Bi-Metal Wing-Drill Tek Screw

Product Range Designed For:

Bi-metal wing drill tek screw range – for light steel

Fastening when stainless steel product is required, e.g. in aluminium sheeting and panels

Head Style:

Countersunk

Drive:

Phillips® No. 2 or No. 3 or Torx® 25

Thread Form:

Coarse thread (Tek 3)

Shank Material:

Stainless steel

Material Grade:

AISI 304/ EN 1.4301 (A2) or AISI 316/ EN 1.4401 (A4)

Recommended Drill Speed:

1,500 - 2,500 RPM

CODE

SIZE

EFFECTIVE THREAD LENGTH

BMWD4.8-38-3

4.8x38mm

24.0mm

BMWD5.5-50-3

5.5x50mm

FULL

BMWD5.5-62-3

5.5x62mm

40.0mm

BMWD5.5-80-3

5.5x80mm

60.0mm

BMWD5.5-100-3

5.5x100mm

60.0mm

BMWD5.5-120-3

5.5x120mm

60.0mm

Bi-metal wing drill tek screw range– for heavy steel

Technical Data

CODE

SIZE

EFFECTIVE THREAD LENGTH

BMWD5.5-65-5

5.5x65mm

FULL

BMWD5.5-85-5

5.5x85mm

50.0mm

BMWD5.5-110-5

5.5x110mm

50.0mm

BMWD5.5-135-5

5.5x135mm

50.0mm

Head

Hardness Rating (Vickers scale) Diameter

Surface Hardness

Core Hardness

4.8mm

390.0HV

270.0HV

5.5mm

390.0HV

270.0HV

Pullover Performance

Ultimate Mechanical Performance Diameter

Tensile Strength

Shear Strength

Diameter

Substrate50mm timber

4.8mm

9.8kN

8.2kN

4.8mm

1.6kN

5.5mm

11.6kN

9.8kN

5.5mm

3.0kN

Threads

Wings

Tek 3 range – Unfactored pull out values

Point

Steel Thickness

Diameter

Drill point

1.2mm

1.6mm

2.0mm

2.5mm

3.0mm

4.0mm

4.8mm

Tek 3

1.9kN

2.7kN

3.5kN

4.5kN

5.0kN

6.3kN

5.5mm

Tek 3

2.0kN

2.4kN

3.6kN

4.3kN

5.1kN

6.7kN

Tek 5 range – Unfactored pull out values

Wings ream hole larger than threads so threads will not engage board.

Steel Thickness

Diameter

Drill point

4.0mm

5.0mm

6.0mm

8.0mm

10.0mm

12.5mm

5.5mm

Tek 5

4.5kN

5.9kN

7.3kN

8.9kN

10.7kN

11.9kN

18

Tel: +44 (0)141 647 7100

Winged Reamer

Wings break off when they hit steel, then threads engage to elevate board jacking

Fixing Finder Pages - 30,33

Fax: +44 (0)141 647 5100

Self-drilling Cementitious Board Screw

Product Range Designed For:

Fixing cementitious and other dense boards to timber and metal substrates

Head Style:

Double countersunk with nibs

Drive:

PhillipsÂŽ No. 2

Thread Form:

Patent (pending) Evolution Universal Thread

Shank Material:

A2 / Carbonâ&#x20AC;&#x2C6;Steel

CODE

SIZE

BOX

BMDW4832

4.8 x 32 mm

200

BMDW4842

4.8 x 42 mm

200

BMDW4850

4.8 x 50 mm

200

BMDW4870

4.8 x 70 mm

200

Technical Data Bi-metal tip for attaching board to wood stud or metal stud

Ultimate Pull Out Loadings (kN) Steel Substrates (S275 JR Mild Steel) Major Diameter 4.8 mm

Steel Thickness (mm) 0.70

1.00

1.20

1.50

2.00

2.50

1.10 kN

1.20 kN

1.60 kN

1.80 kN

2.20 kN

3.60 kN

Timber Substrates Major Diameter

4.8 mm

Timber Grade C16 (soft wood)

Embedment Depth (mm)

Load (kN)

27.0

2.60

35.0

3.00

High and low thread for stable driving Large wafer head with ribs allows good countersink and clamps the board firmly

Fixing Finder Pages - 30

sales@evolutionfasteners.co.uk

www.evolutionfasteners.co.uk

19

INSULATION FIXINGS

Stress Plates

Galvanised / Stainless Steel

Product Range Galvanised Steel Designed For:

Spreading the loading when fixing membrane, insulation and single ply materials in roofing applications, preventing the material being fastened from pulling over the head of the fastener.

CODE

SIZE

BOX

SPR70

Round 70mm

100

SPR90

Round 90mm

100

SP082

Oval 82 x 40mm

100

SSSPR70

A2 Stainless Steel Round 70mm

100

A2PIW80

Round 80mm

100

Stainless Steel

Technical Data Stress Plate Nominal Dimensional Information Part Number

Form

Nominal Thickness (mm)

Nominal Dimensions (mm)

SPR70

Round

0.7

70.0 (diameter)

SPO82

Oval

0.7

82.0 x 40.0

Stress Plate Companion Fixing Finder Fixture Type

Rigid Insulation/ Single Ply Membrane

Substrate Type Masonry Thin Metal Purlin (<1.2mm) Thick Metal Purlin

Companion Product Range ERS

IS

(>1.2mm<3.5mm)

Fixing Finder Pages - 28 - 33 20

Tel: +44 (0)141 647 7100

Fax: +44 (0)141 647 5100

INSULATION FIXINGS

Insulation Retaining Washers

Product Range

CODE

Designed For: For securing insulation to timber and sheet steel when used with Evolution drywall, ISâ&#x20AC;&#x2C6;etc Product Nominal Technical Data

SIZE

DIAMETER

BOX

RW5

5 mm Recess

46 mm

500

RW18

18 mm Recess

46 mm

500

RW65

65 mm Recess

50 mm

400

RW105

105 mm Recess

50 mm

200

RW165

165 mm Recess

50 mm

200

EVNW35

35mm polyprop

35mm

1000

EVPPW50

50mm polyprop

50mm

1000

Head Diameter (mm)

Nominal Body Length (mm)

Extension to Fixing Length (mm)

Colour

RW5

46.0

5.0

2.0

White

ECW60

12 mm Recess

60 mm

100

RW18

46.0

18.0

13.0

Black

ECW90

Fits ECW60

90 mm

100

RW35

50.0

35.0

20.0

White

RW65

50.0

65.0

50.0

White

RW105

50.0

105.0

80.0

Red

RW165

50.0

165.0

140.0

Red

EVNW35

35.0

N/A

N/A

Black

EVPPW50

50.0

N/A

N/A

Black

ECW60

60.0

12.0

10.0

White

ECW90 * Used with ECW60

90.0

N/A

N/A P

White

code

Fixing Finder Pages - 28 - 31

sales@evolutionfasteners.co.uk

www.evolutionfasteners.co.uk

21

INSULATION FIXINGS

Panel-Fix

Insulation Fixing

Product Range Designed For:

Quick through-fix for insulation boards into masonry/ aerated concrete/ brick/ concrete/ stone

Head Style:

Flat

Shank Material:

Polypropylene

Material Grade:

Thermoplastic Polymer

Colour:

FIXTURE THICKNESS

BOX

8.0 x 50 mm

10.0 - 20.0 mm

500

EVPF70

8.0 x 70 mm

10.0 - 40.0 mm

500

EVPF90

8.0 x 90 mm

10.0 - 60.0 mm

500

EVPF110

8.0 x 110 mm

10.0 - 80.0 mm

500

EVPF130

8.0 x 130 mm 10.0 - 100.0 mm

500

CODE

SIZE

EVPF50

White

Technical Data Ultimate Pull Out Values Concrete

Solid Brick

Concrete Block

0.25kN

0.23kN

0.18kN

50mm

70mm

90mm

110mm

130mm

22

Tel: +44 (0)141 647 7100

Fax: +44 (0)141 647 5100

OUR NEW BOARD FIXING GUIDE IS ALSO AVILABLE NOW

CALL TO PLACE ORDER T: +44 (0)141 647 7100 23 sales@evolutionfasteners.co.uk www.evolutionfasteners.co.uk E: sales@evolutionfasteners.co.uk

S

SPECIFICATIONS AND LABORATORY SERVICES

SPECIFICATIONS AND LABORATORY SERVICES To support our various commercial and technical partners, as well as support specifiers and end users of our products, the Company provides testing services in our captive UKAS (United Kingdom Accreditation Service) accredited laboratory on system components or entire system mock-ups for the purposes of supporting the use of our products in conjunction with such a component or system by empirical

Where applicable, we will always perform such empirical testing pursuant to tests included on our schedule of accreditation.

Where empirical tests fall out with the scope of our schedule of accreditation, we will always apply the provisions of our accredited ISO/ IEC 17025 quality management system to ensure that the results of such testing are validated. Our schedule of accreditation can be viewed on the UKAS website, www.ukas.com.

This service is generally provided on a pro gratis basis, contingent ultimately on the specification and use of the Companiesâ&#x20AC;&#x2122; products for the application.

The Company has significantly invested in creating a centre of excellence not only by purchasing research grade analytical equipment, but also in the creation of an exceptionally highly skilled multi-disciplinary team of civil, chemical, mechanical and structural engineers. The Company urges readers of this document to make use of our technical resources as they are generally provided on a pro gratis basis.

SPECIFICATIONS AND LABORATORY SERVICES

The testing and analytical services we offer include, but are not limited to:

- Mechanical properties of fasteners and systems including tensile strength, compressive strength, material yield strength, shear strength, bending capacity, torque capacity, surface/ core hardness, depth of case hardening, etc - Mechanical interaction properties of fastener assemblies including withdrawal resistance, pry-out resistance, pull-through resistance, torque behaviour, delamination strength, lap-shearing/ block-tearing resistance, etc, -

Corrosion resistance properties of fasteners and fastener assemblies including neutral salt spray resistance, cyclic corrosion resistance, wetting and humidity resistance, coating thickness measurement, etc,

- Failure analysis techniques utilising light metallurgical microscopy or SEM (Scanning Electron Microscope) microscopy, high speed videography, metrology, etc, - Chemical composition and PMI (Positive Material Identification)utilising our extensive spectrometrysuite of XRF (X-Ray Fluorescence), FTIR (Fourier Transform Infrared), UV-Vis (Ultraviolet-visible) and OES (Optical Emission Spectrometry) spectrometry techniques.

If you want to discuss how we can support you using our extensive laboratory and technical capabilities, contact the Evolution Technical Team for further assistance by e-mail to technical@evolutionfasteners.co.uk or by telephone call to +44 (0) 141 647 7100.

25

FIXING FINDER

PIR, PUR, XPS, EPS, PF AND PE INSULATION BOARDS

PIR

PIR boards are the most popular type of rigid insulation boards currently available.

BRANDS

Ballytherm®

Kingspan®

Celotex®

Quinn Therm®

EcoTherm®

Recticel®

Icopal®

U-Value Insulated Products®

Warmline®

IKO®

PUR

PUR insulation can be injected into wall cavities to create an energy efficient barrier. The foam is able to reach small spaces to create an air-tight seal.

Dow®

BRANDS

XPS

XPS is a closed cell insulation product commonly used in remodeling and new construction applications.

BRANDS

26

Fibran®

Cellecta®

Jackson Insulation®

Danosa®

Kay-Metzeler®

Dow®

Kingspan®

Fibran®

Ravatherm®

Jablite®

Stylite®

PIR, PUR, XPS, EPS, PF AND PE INSULATION BOARDS

EPS

EPS insulation board is high-performing thermal insulation. It upgrades the thermal properties of a building, improving U-values, reducing the risk of water penetration and condensation.

BRANDS

PF

Jackson Insulation®

Danosa®

Kay-Metzeler®

Dow®

Kingspan®

Fibran®

Ravatherm®

Jablite®

Stylite®

Phenolic foam is considered one of the best material for thermal insulation.

BRANDS

PE

Cellecta®

Cellecta®

Jackson Insulation®

Danosa®

Kay-Metzeler®

Dow®

Kingspan®

Fibran®

Ravatherm®

Jablite®

Stylite®

PE exhibits stable thermal properties which save energy and offset pipe freezing over the entire life of a domestic heating system.

BRANDS

Cellecta®

Jackson Insulation®

Danosa®

Kay-Metzeler®

Dow®

Kingspan®

Fibran®

Ravatherm®

Jablite®

Stylite®

27

FIXING FINDER BOARDS BETWEEN

0mm to 50mm

For use in C1, C2 and C3 (internal) corrosivity category applications

Fixing Required by Substrate Type Insulation Thickness (mm)

Cold or Hot Rolled Mild Structural Steel (S235 to S480)

Kiln Dry Structural Timber (≥ C16)

Blockwork, Masonry and Concrete

Washer/ Stress Plate Detail

Masonry (≥ 7N)

Concrete (≥ C25 ≤ C50)

Non-Fire Rated

A1 Fire Rated

WHX42 PAGE16

GIA801 PAGE8

MSHH6.3-45-516 PAGE14

ECW602 PAGE21

SPR703 PAGE20

TSTF5.5-65-5 PAGE17

IS60 PAGE6

GIA801 PAGE8

MSHH6.3-57-516 PAGE14

ECW602 PAGE21

SPR703 PAGE20

TSTF5.5-50-3 PAGE17

TSTF5.5-65-5 PAGE17

IS60 PAGE6

GIA801 PAGE8

MSHH6.3-57-516 PAGE14

ECW602 PAGE21

SPR703 PAGE20

WHX42 PAGE16

TSTF5.5-50-3 PAGE17

TSTF5.5-65-5 PAGE17

IS60 PAGE6

GIA801 PAGE8

MSHH6.3-57-516 PAGE14

ECW602 PAGE21

SPR703 PAGE20

35

IS60 PAGE6

TSTF5.5-62-3 PAGE17

TSTF5.5-85-5 PAGE17

IS60 PAGE6

GIA801 PAGE8

MSHH6.3-70-516 PAGE14

ECW602 PAGE21

SPR703 PAGE20

40

IS60 PAGE6

TSTF5.5-62-3 PAGE17

TSTF5.5-85-5 PAGE17

IS60 PAGE6

GIA801 PAGE8

MSHH6.3-70-516 PAGE14

ECW602 PAGE21

SPR703 PAGE20

45

IS80 PAGE6

TSTF5.5-80-3 PAGE17

TSTF5.5-85-5 PAGE17

IS80 PAGE6

GIA901 PAGE8

MSHH6.3-82-516 PAGE14

ECW602 PAGE21

SPR703 PAGE20

50

IS80 PAGE6

TSTF5.5-80-3 PAGE17

TSTF5.5-85-5 PAGE17

IS80 PAGE6

GIA901 PAGE8

MSHH6.3-82-516 PAGE14

ECW602 PAGE21

SPR703 PAGE20

≥ 0.5 ≤ 2.5mm

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

10

WHX32 PAGE16

TSTF4.8-38-3 PAGE17

TSTF5.5-42-5 PAGE17

20

WHX42 PAGE16

TSTF5.5-50-3 PAGE17

25

WHX42 PAGE16

30

BOARDS BETWEEN

50mm to 100mm

For use in C1, C2 and C3 (internal) corrosivity category applications

Fixing Required by Substrate Type Insulation Thickness (mm)

Cold or Hot Rolled Mild Structural Steel (S235 to S480)

Kiln Dry Structural Timber (≥ C16)

Blockwork, Masonry and Concrete

Washer/ Stress Plate Detail

Masonry (≥ 7N)

Concrete (≥ C25 ≤ C50)

Non-Fire Rated

A1 Fire Rated

IS100 PAGE6

GIA1101 PAGE8

MSHH6.3-100-516 PAGE14

ECW602 PAGE21

SPR703 PAGE20

TSTF5.5-110-5 PAGE17

IS100 PAGE6

GIA1101 PAGE8

MSHH6.3-100-516 PAGE14

ECW602 PAGE21

SPR703 PAGE20

TSTF5.5-100-3 PAGE17

TSTF5.5-110-5 PAGE17

IS100 PAGE6

GIA1101 PAGE8

MSHH6.3-100-516 PAGE14

ECW602 PAGE21

SPR703 PAGE20

IS100 PAGE6

TSTF5.5-100-3 PAGE17

TSTF5.5-110-5 PAGE17

IS120 PAGE6

GIA1101 PAGE8

MSHH6.3-100-516 PAGE14

ECW602 PAGE21

SPR703 PAGE20

80

IS100 PAGE6

TSTF5.5-120-3 PAGE17

TSTF5.5-110-5 PAGE17

IS120 PAGE6

GIA1401 PAGE8

MSHH6.3-125-516 PAGE14

ECW602 PAGE21

SPR703 PAGE20

85

IS100 PAGE6

TSTF5.5-120-3 PAGE17

TSTF5.5-110-5 PAGE17

IS120 PAGE6

GIA1401 PAGE8

MSHH6.3-125-516 PAGE14

ECW602 PAGE21

SPR703 PAGE20

90

IS100 PAGE6

TSTF5.5-120-3 PAGE17

TSTF5.5-135-5 PAGE17

IS120 PAGE6

GIA1401 PAGE8

MSHH6.3-125-516 PAGE14

ECW602 PAGE21

SPR703 PAGE20

95

IS120 PAGE6

TSTF5.5-120-3 PAGE17

TSTF5.5-135-5 PAGE17

IS140 PAGE6

GIA1401 PAGE8

MSHH6.3-140-516 PAGE14

ECW602 PAGE21

SPR703 PAGE20

100

IS120 PAGE6

TSTF5.5-120-3 PAGE17

TSTF5.5-135-5 PAGE17

IS140 PAGE6

GIA1401 PAGE8

MSHH6.3-140-516 PAGE14

ECW602 PAGE21

SPR703 PAGE20

28

≥ 0.5 ≤ 2.5mm

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

60

IS80 PAGE6

TSTF5.5-80-3 PAGE17

TSTF5.5-100-5 PAGE17

65

IS80 PAGE6

TSTF5.5-100-3 PAGE17

70

IS80 PAGE6

75

PIR, PUR, XPS, EPS, PF AND PE INSULATION BOARDS BOARDS BETWEEN

100mm to 200mm

For use in C1, C2 and C3 (internal) corrosivity category applications

Fixing Required by Substrate Type Insulation Thickness (mm)

Cold or Hot Rolled Mild Structural Steel (S235 to S480)

Kiln Dry Structural Timber (≥ C16)

Blockwork, Masonry and Concrete

Washer/ Stress Plate Detail

Masonry (≥ 7N)

Concrete (≥ C25 ≤ C50)

Non-Fire Rated

A1 Fire Rated

IS140 PAGE6

GIA1701 PAGE8

MSHH6.3-140-516 PAGE14

ECW602 PAGE21

SPR704 PAGE20

TSTF5.5-150-5 PAGE17

IS160 PAGE6

GIA1701 PAGE8

MSHH6.3-160-516 PAGE14

ECW602 PAGE21

SPR704 PAGE20

TSTF5.5-180-3 PAGE17

TSTF5.5-180-5 PAGE17

IS180 PAGE6

GIA1701 PAGE8

MSHH6.3-160-516 PAGE14

ECW602 PAGE21

SPR704 PAGE20

IS160 PAGE6

TSTF5.5-180-3 PAGE17

TSTF5.5-180-5 PAGE17

IS180 PAGE6

GIA2001 PAGE8

MSHH6.3-180-516 PAGE14

ECW602 PAGE21

SPR704 PAGE20

150

IS160 PAGE6

TSTF5.5-180-3 PAGE17

TSTF5.5-180-5 PAGE17

IS180 PAGE6

GIA2001 PAGE8

MSHH6.3-180-516 PAGE14

ECW602 PAGE21

SPR704 PAGE20

160

IS180 PAGE6

TSTF5.5-180-3 PAGE17

None

IS200 PAGE6

GIA2001 PAGE8

MSHH6.3-200-516 PAGE14

ECW602 PAGE21

SPR704 PAGE20

180

IS200 PAGE6

None

None

IS220 PAGE6

GIA2401 PAGE8

None

ECW602 PAGE21

SPR704 PAGE20

190

IS200 PAGE6

None

None

IS220 PAGE6

GIA2401 PAGE8

None

ECW602 PAGE21

SPR704 PAGE20

200

IS220 PAGE6

None

None

IS220 PAGE6

GIA2401 PAGE8

None

ECW602 PAGE21

SPR704 PAGE20

≥ 0.5 ≤ 2.5mm

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

110

IS120 PAGE6

TSTF5.5-150-3 PAGE17

TSTF5.5-150-5 PAGE17

120

IS140 PAGE6

TSTF5.5-150-3 PAGE17

130

IS140 PAGE6

140

NOTE: Telescopic tube washers are available for use in warm roof/ flat roof applications along with a smaller fastener please refer to RW product range (Page 21)

1Diameter can be increased to resist pull-over failure using GIW80 (Page 20), 2Diameter can be increased to resist pull-over failure using ECW90 (Page 21), 3Diameter can be increased to resist pull-over failure using SPR90 (Page 20).

4Diameter

can be increased to resist pull-over failure using SSSPR90 (Page 20).

29

FIXING FINDER BOARDS BETWEEN

0mm to 50mm

For use in C3 and C4 (internal) corrosivity category applications

Fixing Required by Substrate Type Insulation Thickness (mm)

Cold or Hot Rolled Mild Structural Steel (S235 to S480)

Kiln Dry Structural Timber (≥ C16)

Blockwork, Masonry and Concrete

Washer/ Stress Plate Detail

Masonry (≥ 7N)

Concrete (≥ C25 ≤ C50)

Non-Fire Rated

A1 Fire Rated

A4IS45 PAGE7

A2GIA801 PAGE8

A4HH6.3-45-516 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

BMDW5.5-65-5 PAGE19

A4IS60 PAGE7

A2GIA801 PAGE8

A4HH6.3-57-516 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

BMWD5.5-62-3 PAGE18

BMDW5.5-65-5 PAGE19

A4IS60 PAGE7

A2GIA801 PAGE8

A4HH6.3-57-516 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

BMDW4842 PAGE19

BMWD5.5-62-3 PAGE18

BMDW5.5-65-5 PAGE19

A4IS60 PAGE7

A2GIA801 PAGE8

A4HH6.3-57-516 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

35

A4IS60 PAGE7

BMWD5.5-62-3 PAGE18

BMWD5.5-85-5 PAGE18

A4IS60 PAGE7

A2GIA801 PAGE8

A4HH6.3-70-516 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

40

A4IS60 PAGE7

BMWD5.5-62-3 PAGE18

BMWD5.5-85-5 PAGE18

A4IS60 PAGE7

A2GIA801 PAGE8

A4HH6.3-70-516 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

45

A4IS80 PAGE7

BMWD5.5-80-3 PAGE18

BMWD5.5-85-5 PAGE18

A4IS80 PAGE7

A2GIA801 PAGE8

A4HH6.3-82-516 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

50

A4IS80 PAGE7

BMWD5.5-80-3 PAGE18

BMWD5.5-85-5 PAGE18

A4IS80 PAGE7

A2GIA901 PAGE8

A4HH6.3-82-516 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

≥ 0.5 ≤ 2.5mm

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

10

BMDW4842 PAGE19

BMDW5.5-50-3 PAGE19

BMDW5.5-65-5 PAGE19

20

BMDW4842 PAGE19

BMDW5.5-50-3 PAGE19

25

BMDW4842 PAGE19

30

BOARDS BETWEEN

50mm to 100mm

For use in C3 and C4 (internal) corrosivity category applications

Fixing Required by Substrate Type Insulation Thickness (mm)

Cold or Hot Rolled Mild Structural Steel (S235 to S480)

Kiln Dry Structural Timber (≥ C16)

Blockwork, Masonry and Concrete

Masonry (≥ 7N)

Concrete (≥ C25 ≤ C50)

Non-Fire Rated

A1 Fire Rated

Washer/ Stress Plate Detail

≥ 0.5 ≤ 2.5mm

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

60

A4IS80 PAGE7

BMWD5.5-80-3 PAGE18

BMWD5.5-110-5 PAGE18

A4IS100 PAGE7

A2GIA1101 PAGE8

A4HH6.3-100-516 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

65

A4IS80 PAGE7

BMWD5.5-100-3 PAGE18

BMWD5.5-110-5 PAGE18

A4IS100 PAGE7

A2GIA1101 PAGE8

A4HH6.3-100-516 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

70

A4IS80 PAGE7

BMWD5.5-100-3 PAGE18

BMWD5.5-110-5 PAGE18

A4IS100 PAGE7

A2GIA1101 PAGE8

A4HH6.3-100-516 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

75

A4IS100 PAGE7

BMWD5.5-100-3 PAGE18

BMWD5.5-110-5 PAGE18

A4IS120 PAGE7

A2GIA1101 PAGE8

A4HH6.3-100-516 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

80

A4IS100 PAGE7

BMWD5.5-120-3 PAGE18

BMWD5.5-110-5 PAGE18

A4IS120 PAGE7

A2GIA1401 A4HH6.3-125-516 PAGE8 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

85

A4IS100 PAGE7

BMWD5.5-120-3 PAGE18

BMWD5.5-135-5 PAGE18

A4IS120 PAGE7

A2GIA1401 A4HH6.3-125-516 PAGE8 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

90

A4IS100 PAGE7

BMWD5.5-120-3 PAGE18

BMWD5.5-135-5 PAGE18

A4IS120 PAGE7

A2GIA1401 A4HH6.3-125-516 PAGE8 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

95

A4IS120 PAGE7

BMWD5.5-120-3 PAGE18

BMWD5.5-135-5 PAGE18

A4IS140 PAGE7

A2GIA1401 A4HH6.3-140-516 PAGE8 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

100

A4IS120 PAGE7

BMWD5.5-120-3 PAGE18

BMWD5.5-135-5 PAGE18

A4IS140 PAGE7

A2GIA1401 A4HH6.3-140-516 PAGE8 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

30

PIR, PUR, XPS, EPS, PF AND PE INSULATION BOARDS BOARDS BETWEEN

100mm to 200mm

For use in C3 and C4 (internal) corrosivity category applications

Fixing Required by Substrate Type Insulation Thickness (mm)

Cold or Hot Rolled Mild Structural Steel (S235 to S480)

Kiln Dry Structural Timber (≥ C16)

Blockwork, Masonry and Concrete

Washer/ Stress Plate Detail

Masonry (≥ 7N)

Concrete (≥ C25 ≤ C50)

Non-Fire Rated

A1 Fire Rated

A4IS140 PAGE7

A2GIA1701 PAGE8

A4HH6.3-140-516 PAGE12

ECW602 PAGE21

SSSPR70 PAGE20

None

A4IS160 PAGE7

A2GIA1701 PAGE8

None

ECW602 PAGE21

SSSPR70 PAGE20

None

None

A4IS180 PAGE7

A2GIA1701 PAGE8

None

ECW602 PAGE21

SSSPR70 PAGE20

A4IS160 PAGE7

None

None

A4IS180 PAGE7

None

None

ECW602 PAGE21

SSSPR70 PAGE20

150

A4IS160 PAGE7

None

None

A4IS180 PAGE7

None

None

ECW602 PAGE21

SSSPR70 PAGE20

160

A4IS180 PAGE7

None

None

A4IS200 PAGE7

None

None

ECW602 PAGE21

SSSPR70 PAGE20

180

A4IS180 PAGE7

None

None

A4IS200 PAGE7

None

None

ECW602 PAGE21

SSSPR70 PAGE20

190

A4IS200 PAGE7

None

None

A4IS220 PAGE7

None

None

ECW602 PAGE21

SSSPR70 PAGE20

200

A4IS200 PAGE7

None

None

A4IS220 PAGE7

None

None

ECW602 PAGE21

SSSPR70 PAGE20

≥ 0.5 ≤ 2.5mm

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

110

A4IS120 PAGE7

None

None

120

A4IS140 PAGE7

None

130

A4IS140 PAGE7

140

NOTE: Telescopic tube washers are available for use in warm roof/ flat roof applications along with a smaller fastener please refer to RW product range (Page 21)

1 2

Diameter can be increased to resist pull-over failure using A2PIW80 (Page 20), Diameter can be increased to resist pull-over failure using ECW90 (Page 21).

31

FIXING FINDER

GLASS, ROCK, STONE AND MINERAL WOOL ROLLS, BATTENS, MATTRESSES AND BOARDS For use in C1, C2 and C3 (internal) corrosivity category applications

Fixing Required by Substrate Type Insulation Thickness (mm)

Cold or Hot Rolled Mild Structural Steel (S235 to S480)

Kiln Dry Structural Timber (≥ C16)

Blockwork, Masonry and Concrete

Washer/ Stress Plate Detail

Masonry (≥ 7N)

Concrete (≥ C25 ≤ C50)

IS80 PAGE6

GIA901 PAGE8

MSHH6.3-82-516 PAGE14

SPR702 PAGE20

TSTF5.5-100-5 PAGE17

IS100 PAGE6

GIA1101 PAGE8

MSHH6.3-100-516 PAGE14

SPR702 PAGE20

TSTF5.5-100-3 PAGE17

TSTF5.5-110-5 PAGE17

IS120 PAGE6

GIA1101 PAGE8

MSHH6.3-100-516 PAGE14

SPR702 PAGE20

IS120 PAGE6

TSTF5.5-120-3 PAGE17

TSTF5.5-135-5 PAGE17

IS140 PAGE6

GIA1401 PAGE8

MSHH6.3-140-516 PAGE14

SPR702 PAGE20

110

IS120 PAGE6

TSTF5.5-150-3 PAGE17

TSTF5.5-150-5 PAGE17

IS140 PAGE6

GIA1701 PAGE8

MSHH6.3-140-516 PAGE14

SPR702 PAGE20

125

IS140 PAGE6

TSTF5.5-180-3 PAGE17

TSTF5.5-180-5 PAGE17

IS180 PAGE6

GIA1701 PAGE8

MSHH6.3-160-516 PAGE14

SPR702 PAGE20

150

IS160 PAGE6

TSTF5.5-180-3 PAGE17

TSTF5.5-180-5 PAGE17

IS180 PAGE6

GIA2001 PAGE8

MSHH6.3-180-516 PAGE14

SPR702 PAGE20

180

IS200 PAGE6

None

None

IS220 PAGE6

GIA2401 PAGE8

None

SPR702 PAGE20

190

IS200 PAGE6

None

None

IS220 PAGE6

GIA2401 PAGE8

None

SPR702 PAGE20

200

IS220 PAGE6

None

None

IS240 PAGE6

GIA2401 PAGE8

None

SPR702 PAGE20

≥ 0.5 ≤ 2.5mm

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

50

IS80 PAGE6

TSTF5.5-80-3 PAGE17

TSTF5.5-85-5 PAGE17

60

IS80 PAGE6

TSTF5.5-80-3 PAGE17

75

IS100 PAGE6

100

GLASS

ROCK

32

Glass wool insulation, also known as fibreglass, is made from glass fibres.

Glass is heated to very high temperatures until it melts, andis then spun quickly to create fibres.

Rock wool has excellent sound-deadening properties and higher insulating value than fiberglass.

GLASS, ROCK, STONE AND MINERAL WOOL ROLLS For use in C3 and C4 (internal) corrosivity category applications

Fixing Required by Substrate Type Cold or Hot Rolled Mild Structural Steel (S235 to S480)

Insulation Thickness (mm)

Kiln Dry Structural Timber (≥ C16)

Blockwork, Masonry and Concrete

Washer/ Stress Plate Detail

Masonry (≥ 7N)

Concrete (≥ C25 ≤ C50)

A4IS80 PAGE7

A2GIA903 PAGE8

A4HH6.3-82-516 PAGE12

SSSPR70 PAGE20

BMWD5.5-110-5 PAGE18

A4IS100 PAGE7

A2GIA1103 PAGE8

A4HH6.3-100-516 PAGE12

SSSPR70 PAGE20

BMWD5.5-100-3 PAGE18

BMWD5.5-110-5 PAGE18

A4IS120 PAGE7

A2GIA1103 PAGE8

A4HH6.3-100-516 PAGE12

SSSPR70 PAGE20

A4IS120 PAGE7

BMWD5.5-120-3 PAGE18

BMWD5.5-135-5 PAGE18

A4IS140 PAGE7

A2GIA1403 PAGE8

A4HH6.3-140-516 PAGE12

SSSPR70 PAGE20

110

A4IS120 PAGE7

None

None

A4IS140 PAGE7

A2GIA1703 PAGE8

A4HH6.3-140-516 PAGE12

SSSPR70 PAGE20

125

A4IS140 PAGE7

None

None

A4IS180 PAGE7

A2GIA1703 PAGE8

None

SSSPR70 PAGE20

150

A4IS160 PAGE7

None

None

A4IS180 PAGE7

None

None

SSSPR70 PAGE20

180

A4IS180 PAGE7

None

None

A4IS200 PAGE7

None

None

SSSPR70 PAGE20

190

A4IS200 PAGE7

None

None

A4IS220 PAGE7

None

None

SSSPR70 PAGE20

200

A4IS200 PAGE7

None

None

A4IS220 PAGE7

None

None

SSSPR70 PAGE20

≥ 0.5 ≤ 2.5mm

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

50

A4IS80 PAGE7

BMWD5.5-80-3 PAGE18

BMWD5.5-85-5 PAGE18

60

A4IS80 PAGE7

BMWD5.5-80-3 PAGE18

75

A4IS100 PAGE7

100

1 Diameter can be increased to resist pull-over failure using GIW80 (Page 20),

2 Diameter can be increased to resist pull-over failure using SPR90 (Page 20).

3 Diameter can be increased to resist pull-over failure using A2PIW80 (Page 20).

NOTE: Telescopic tube washers are available for use in warm roof/ flat roof applications along with a smaller fastener please refer to RW product range (Page 21)

MINERAL

STONE

Mineral Wool insulation products are designed and produced to ensure healthy, safe and environmentally-friendly places to live and work.

Stone wool delivers unique benefits as an insulation solution and effectively reduces airflow and sound transmission, while providing higher airflow resistivity for improved sound attenuation.

33

FIXING FINDER

FIXING STRUCTURAL, TRAPEZOIDAL, INSULATION PANELS WITH STEEL OR ALUMINIUM FASCIA’S FOR WALLS, ROOFING AND CLADDING IN THIS SECTION, THE 3 MOST POPULAR BRANDS FOR TRAPEZOIDAL INSULATION ARE SPLIT INTO TWO SECTIONS:

EVOSHIELD® C1, C2 AND C3 CORROSIVITY ENVIRONMENTS AND A2 STEEL STAINLESS FOR C3 AND C4 CORROSIVITY ENVIRONMENTS

34

TRAPEZOIDAL PANELS IN C1,C2 AND C3

KINGSPAN® INSULATED PANELS

C1, C2

C3

EvoShield® For use in and (internal) corrosivity category applications

Composite Panel Fasteners for Kingspan KS1000RW & KS2000RW Type Panels

CORE (TROUGH) FIXINGS Insulation CORE Thickness (mm)

40 53 60 73 80 91 100 115 120 137 150

EvoShield® for C1, C2 and C3 (internal) Corrosivity Environments Steel Substrates

Timber Substrate

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

(≥ C16)

TSBWHT5.5-80-3 PAGE10 TSBWHT5.5-80-3 PAGE10 TSBWHT5.5-105-3 PAGE10 TSBWHT5.5-105-3 PAGE10 TSBWHT5.5-105-3 PAGE10 TSBWHT5.5-135-3 PAGE10 TSBWHT5.5-135-3 PAGE10 TSBWHT5.5-150-3 PAGE10 TSBWHT5.5-150-3 PAGE10 TSBWHT5.5-185-3 PAGE10 TSBWHT5.5-185-3 PAGE10

TSBWHT5.5-85-5 PAGE10 TSBWHT5.5-105-5 PAGE10 TSBWHT5.5-105-5 PAGE10 TSBWHT5.5-125-5 PAGE10 TSBWHT5.5-125-5 PAGE10 TSBWHT5.5-150-5 PAGE10 TSBWHT5.5-150-5 PAGE10 TSBWHT5.5-185-5 PAGE10 TSBWHT5.5-185-5 PAGE10 TSBWHT5.5-185-5 PAGE10 TSBWHT+5.5-235-5 PAGE10

TSBWHT6.3-80-GP PAGE10 TSBWHT6.3-100-GP PAGE10 TSBWHT6.3-100-GP PAGE10 TSBWHT6.3-120-GP PAGE10 TSBWHT6.3-120-GP PAGE10 TSBWHT6.3-150-GP PAGE10 TSBWHT6.3-150-GP PAGE10 TSBWHT6.3-150-GP PAGE10 None None None

35

FIXING FINDER CROWN (PEAK) FIXINGS Insulation CROWN Thickness (mm)

EvoShield® for C1, C2 and C3 (internal) Corrosivity Environments Steel Substrates

Timber Substrate

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

(≥ C16)

71

TSBWHT5.5-105-3 PAGE10

TSBWHT5.5-125-5 PAGE10

TSBWHT6.3-120-GP PAGE10

84

TSBWHT5.5-135-3 PAGE10

TSBWHT5.5-125-5 PAGE10

TSBWHT6.3-120-GP PAGE10

91

TSBWHT5.5-135-3 PAGE10

TSBWHT5.5-150-5 PAGE10

TSBWHT6.3-150-GP PAGE10

104

TSBWHT5.5-135-3 PAGE10

TSBWHT5.5-150-5 PAGE10

TSBWHT6.3-150-GP PAGE10

111

TSBWHT5.5-150-3 PAGE10

TSBWHT5.5-185-5 PAGE10

TSBWHT6.3-150-GP PAGE10

122

TSBWHT5.5-150-3 PAGE10

TSBWHT5.5-185-5 PAGE10

None

131

TSBWHT5.5-185-3 PAGE10

TSBWHT5.5-185-5 PAGE10

None

146

TSBWHT5.5-185-3 PAGE10

TSBWHT5.5-185-5 PAGE10

None

151

TSBWHT5.5-185-3 PAGE10

TSBWHT5.5-235-5 PAGE10

None

168

TSBWHT5.5-225-3 PAGE10

TSBWHT5.5-235-5 PAGE10

None

181

TSBWHT5.5-225-3 PAGE10

TSBWHT5.5-235-5 PAGE10

None

Composite Panel Fasteners for Kingspan® KS1000TS® Type Panels

CORE (TROUGH) FIXINGS Insulation CORE Thickness (mm)

EvoShield® for C1, C2 and C3 (internal) Corrosivity Environments Steel Substrates

Timber Substrate

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

(≥ C16)

40

TSBWHT5.5-80-3 PAGE10

TSBWHT5.5-85-5 PAGE10

TSBWHT6.3-80-GP PAGE10

50

TSBWHT5.5-80-3 PAGE10

TSBWHT5.5-105-5 PAGE10

TSBWHT6.3-100-GP PAGE10

60

TSBWHT5.5-105-3 PAGE10

TSBWHT5.5-105-5 PAGE10

TSBWHT6.3-100-GP PAGE10

70

TSBWHT5.5-105-3 PAGE10

TSBWHT5.5-125-5 PAGE10

TSBWHT6.3-120-GP PAGE10

80

TSBWHT5.5-105-3 PAGE10

TSBWHT5.5-125-5 PAGE10

TSBWHT6.3-120-GP PAGE10

100

TSBWHT5.5-135-3 PAGE10

TSBWHT5.5-150-5 PAGE10

TSBWHT6.3-150-GP PAGE10

115

TSBWHT5.5-150-3 PAGE10

TSBWHT5.5-185-5 PAGE10

TSBWHT6.3-150-GP PAGE10

120

TSBWHT5.5-150-3 PAGE10

TSBWHT5.5-185-5 PAGE10

None

137

TSBWHT5.5-185-3 PAGE10

TSBWHT5.5-185-5 PAGE10

None

150

TSBWHT5.5-185-3 PAGE10

TSBWHT5.5-235-5 PAGE10

None

36

TRAPEZOIDAL PANELS IN C1,C2 AND C3 CROWN (PEAK) FIXINGS Insulation CROWN Thickness (mm)

EvoShield® for C1, C2 and C3 (internal) Corrosivity Environments Steel Substrates

Timber Substrate

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

(≥ C16)

71

TSBWHT5.5-105-3

TSBWHT5.5-125-5

TSBWHT6.3-120-GP

81

TSBWHT5.5-135-3

TSBWHT5.5-125-5

TSBWHT6.3-120-GP

91

TSBWHT5.5-135-3

TSBWHT5.5-150-5

TSBWHT6.3-150-GP

101

TSBWHT5.5-135-3

TSBWHT5.5-150-5

TSBWHT6.3-150-GP

111

TSBWHT5.5-150-3

TSBWHT5.5-185-5

TSBWHT6.3-150-GP

131

TSBWHT5.5-185-3

TSBWHT5.5-185-5

None

146

TSBWHT5.5-185-3

TSBWHT5.5-185-5

None

151

TSBWHT5.5-185-3

TSBWHT5.5-235-5

None

168

TSBWHT5.5-225-3

TSBWHT5.5-235-5

None

181

TSBWHT5.5-225-3

TSBWHT5.5-235-5

None

PAGE10 PAGE10 PAGE10 PAGE10 PAGE10 PAGE10 PAGE10 PAGE10 PAGE10 PAGE10

PAGE10 PAGE10 PAGE10 PAGE10 PAGE10 PAGE10 PAGE10 PAGE10 PAGE10 PAGE10

PAGE10 PAGE10 PAGE10 PAGE10 PAGE10

Composite Panel Fasteners for Kingspan® KS1000AWP® Type Panels

TONGUE FIXINGS Insulation CORE Thickness (mm)

EvoShield® for C1, C2 and C3 (internal) Corrosivity Environments Steel Substrates

Timber Substrate

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

(≥ C16)

45

TSBWHT5.5-80-3 PAGE10

TSBWHT5.5-85-5 PAGE10

TSBWHT6.3-80-GP PAGE10

50

TSBWHT5.5-80-3 PAGE10

TSBWHT5.5-105-5 PAGE10

TSBWHT6.3-100-GP PAGE10

60

TSBWHT5.5-105-3 PAGE10

TSBWHT5.5-105-5 PAGE10

TSBWHT6.3-100-GP PAGE10

70

TSBWHT5.5-105-3 PAGE10

TSBWHT5.5-125-5 PAGE10

TSBWHT6.3-120-GP PAGE10

80

TSBWHT5.5-105-3 PAGE10

TSBWHT5.5-125-5 PAGE10

TSBWHT6.3-120-GP PAGE10

100

TSBWHT5.5-135-3 PAGE10

TSBWHT5.5-150-5 PAGE10

TSBWHT6.3-150-GP PAGE10

120

TSBWHT5.5-150-3 PAGE10

TSBWHT5.5-185-5 PAGE10

None

140

TSBWHT5.5-185-3 PAGE10

TSBWHT5.5-185-5 PAGE10

None

150

TSBWHT5.5-185-3 PAGE10

TSBWHT5.5-235-5 PAGE10

None

37

FIXING FINDER

EUROBOND INSULATED PANELS Composite Panel Fasteners for Eurobond® Europanel® Type Panels

Insulation CORE Thickness (mm)

EvoShield® for C1, C2 and C3 (internal) Corrosivity Environments Timber Substrate

Steel Substrates ≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

(≥ C16)

75

TSBWHT5.5-105-3 PAGE10

TSBWHT5.5-125-5 PAGE10

TSBWHT6.3-120-GP PAGE10

100

TSBWHT5.5-135-3 PAGE10

TSBWHT5.5-150-5 PAGE10

TSBWHT6.3-150-GP PAGE10

125

TSBWHT5.5-150-3 PAGE10

TSBWHT5.5-185-5 PAGE10

None

150

TSBWHT5.5-185-3 PAGE10

TSBWHT5.5-235-5 PAGE10

None

175

TSBWHT5.5-225-3 PAGE10

TSBWHT5.5-235-5 PAGE10

None

200

TSBWHT5.5-225-3 PAGE10

TSBWHT5.5-235-5 PAGE10

None

240

TSBWHT5.5-275-3 PAGE10

None

None

Composite Panel Fasteners for Eurobond® Rockspan® & Rainspan® Type Panels

Insulation CORE Thickness (mm)

EvoShield® for C1, C2 and C3 (internal) Corrosivity Environments Steel Substrates

Timber Substrate

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

(≥ C16)

75

TSBWHT5.5-135-3 PAGE10

TSBWHT5.5-150-5 PAGE10

TSBWHT6.3-150-GP PAGE10

100

TSBWHT5.5-135-3 PAGE10

TSBWHT5.5-150-5 PAGE10

TSBWHT6.3-150-GP PAGE10

125

TSBWHT5.5-150-3 PAGE10

TSBWHT5.5-185-5 PAGE10

None

150

TSBWHT5.5-185-3 PAGE10

TSBWHT5.5-235-5 PAGE10

None

175

TSBWHT5.5-225-3 PAGE10

TSBWHT5.5-235-5 PAGE10

None

200

TSBWHT5.5-225-3 PAGE10

TSBWHT5.5-235-5 PAGE10

None

240

TSBWHT5.5-275-3 PAGE10

None

None

38

TRAPEZOIDAL PANELS IN C1,C2 AND C3

TATA INSULATED PANELS Composite Panel Fasteners for TATA® Trisomet® Type Panels

CORE (TROUGH) FIXINGS Insulation CORE Thickness (mm)

EvoShield® for C1, C2 and C3 (internal) Corrosivity Environments Steel Substrates

Timber Substrate

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

(≥ C16)

40

TSBWHT5.5-80-3 PAGE10

TSBWHT5.5-85-5 PAGE10

TSBWHT6.3-80-GP PAGE10

60

TSBWHT5.5-105-3 PAGE10

TSBWHT5.5-105-5 PAGE10

TSBWHT6.3-100-GP PAGE10

80

TSBWHT5.5-105-3 PAGE10

TSBWHT5.5-125-5 PAGE10

TSBWHT6.3-120-GP PAGE10

100

TSBWHT5.5-135-3 PAGE10

TSBWHT5.5-150-5 PAGE10

TSBWHT6.3-150-GP PAGE10

120

TSBWHT5.5-150-3 PAGE10

TSBWHT5.5-185-5 PAGE10

None

135

TSBWHT5.5-185-3 PAGE10

TSBWHT5.5-185-5 PAGE10

None

CROWN (PEAK) FIXINGS Insulation CROWN Thickness (mm)

EvoShield® for C1, C2 and C3 (internal) Corrosivity Environments Steel Substrates

Timber Substrate

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

(≥ C16)

72

TSBWHT5.5-105-3 PAGE10

TSBWHT5.5-125-5 PAGE10

TSBWHT6.3-120-GP PAGE10

92

TSBWHT5.5-135-3 PAGE10

TSBWHT5.5-150-5 PAGE10

TSBWHT6.3-150-GP PAGE10

112

TSBWHT5.5-150-3 PAGE10

TSBWHT5.5-185-5 PAGE10

TSBWHT6.3-150-GP PAGE10

132

TSBWHT5.5-185-3 PAGE10

TSBWHT5.5-185-5 PAGE10

None

152

TSBWHT5.5-185-3 PAGE10

TSBWHT5.5-235-5 PAGE10

None

167

TSBWHT5.5-225-3 PAGE10

TSBWHT5.5-235-5 PAGE10

None

Composite Panel Fasteners for TATA® Trimapanel® Type Panels Insulation Thickness (mm)

EvoShield® for C1, C2 and C3 (internal) Corrosivity Environments Steel Substrates

Timber Substrate

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

(≥ C16)

70

TSBWHT5.5-105-3 PAGE10

TSBWHT5.5-125-5 PAGE10

TSBWHT6.3-120-GP PAGE10

90

TSBWHT5.5-135-3 PAGE10

TSBWHT5.5-150-5 PAGE10

TSBWHT6.3-150-GP PAGE10

120

TSBWHT5.5-150-3 PAGE10

TSBWHT5.5-185-5 PAGE10

None 39

FIXING FINDER

For use in

C3

and

C4 (internal) corrosivity category applications

KINGSPAN® INSULATED PANELS

Composite Panel Fasteners for Kingspan KS1000RW & KS2000RW Type Panels

CORE (TROUGH) FIXINGS Insulation CORE Thickness (mm)

A2 Stainless for C3 and C4 Corrosivity Environments Steel Substrates ≥ 1.2 ≤ 4.0mm

40

≥ 4.0 ≤ 12.0mm

Timber Substrate (≥ C16)

40

BMTSBWHT5.5-80-3 PAGE11

BMTSBWHT5.5-85-5 PAGE11

None

53

BMTSBWHT5.5-80-3 PAGE11

BMTSBWHT5.5-105-5 PAGE11

None

60

BMTSBWHT5.5-105-3 PAGE11

BMTSBWHT5.5-105-5 PAGE11

None

73

BMTSBWHT5.5-105-3 PAGE11

BMTSBWHT5.5-125-5 PAGE11

None

80

BMTSBWHT5.5-105-3 PAGE11

BMTSBWHT5.5-125-5 PAGE11

None

91

BMTSBWHT5.5-135-3 PAGE11

BMTSBWHT5.5-150-5 PAGE11

None

100

BMTSBWHT5.5-135-3 PAGE11

BMTSBWHT5.5-150-5 PAGE11

None

115

BMTSBWHT5.5-150-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

120

BMTSBWHT5.5-150-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

137

BMTSBWHT5.5-185-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

150

BMTSBWHT5.5-185-3 PAGE11

BMTSBWHT5.5-245-5 PAGE11

None

TRAPEZOIDAL PANELS IN C3 AND C4 CROWN (PEAK) FIXINGS Insulation CROWN Thickness (mm)

A2 Stainless for C3 and C4 Corrosivity Environments Steel Substrates ≥ 4.0 ≤ 12.0 mm

≥ 1.2 ≤ 4.0 mm

Timber Substrate ≥ 4.0 ≤ 12.0 mm

71

BMTSBWHT5.5-105-3 PAGE11

BMTSBWHT5.5-125-5 PAGE11

None

81

BMTSBWHT5.5-135-3 PAGE11

BMTSBWHT5.5-125-5 PAGE11

None

91

BMTSBWHT5.5-135-3 PAGE11

BMTSBWHT5.5-150-5 PAGE11

None

104

BMTSBWHT5.5-135-3 PAGE11

BMTSBWHT5.5-150-5 PAGE11

None

111

BMTSBWHT5.5-150-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

122

BMTSBWHT5.5-150-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

131

BMTSBWHT5.5-185-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

146

BMTSBWHT5.5-185-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

151

BMTSBWHT5.5-185-3 PAGE11

BMTSBWHT5.5-235-5 PAGE11

None

168

BMTSBWHT5.5-235-3 PAGE11

BMTSBWHT5.5-235-5 PAGE11

None

181

BMTSBWHT5.5-235-3 PAGE11

BMTSBWHT5.5-235-5 PAGE11

None

Composite Panel Fasteners for Kingspan® KS1000TS® Type Panels

CORE (TROUGH) FIXINGS Insulation CORE Thickness (mm)

A2 Stainless for C3 and C4 Corrosivity Environments Steel Substrates ≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

Timber Substrate (≥ C16)

BMTSBWHT5.5-80-3 PAGE11

BMTSBWHT5.5-85-5 PAGE11

None

50

BMTSBWHT5.5-80-3 PAGE11

BMTSBWHT5.5-105-5 PAGE11

None

60

BMTSBWHT5.5-105-3 PAGE11

BMTSBWHT5.5-105-5 PAGE11

None

70

BMTSBWHT5.5-105-3 PAGE11

BMTSBWHT5.5-125-5 PAGE11

None

80

BMTSBWHT5.5-105-3 PAGE11

BMTSBWHT5.5-125-5 PAGE11

None

100

BMTSBWHT5.5-135-3 PAGE11

BMTSBWHT5.5-150-5 PAGE11

None

115

BMTSBWHT5.5-150-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

120

BMTSBWHT5.5-150-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

137

BMTSBWHT5.5-185-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

150

BMTSBWHT5.5-185-3 PAGE11

BMTSBWHT5.5-245-5 PAGE11

None

40

41

FIXING FINDER CROWN (PEAK) FIXINGS Insulation CROWN Thickness (mm)

A2 Stainless for C3 and C4 Corrosivity Environments Steel Substrates ≥ 4.0 ≤ 12.0 mm

Timber Substrate

≥ 1.2 ≤ 4.0 mm

≥ 4.0 ≤ 12.0 mm

71

BMTSBWHT5.5-105-3 PAGE11

BMTSBWHT5.5-125-5 PAGE11

None

81

BMTSBWHT5.5-135-3 PAGE11

BMTSBWHT5.5-125-5 PAGE11

None

91

BMTSBWHT5.5-135-3 PAGE11

BMTSBWHT5.5-150-5 PAGE11

None

101

BMTSBWHT5.5-135-3 PAGE11

BMTSBWHT5.5-150-5 PAGE11

None

111

BMTSBWHT5.5-150-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

131

BMTSBWHT5.5-185-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

146

BMTSBWHT5.5-185-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

151

BMTSBWHT5.5-185-3 PAGE11

BMTSBWHT5.5-245-5 PAGE11

None

168

BMTSBWHT5.5-235-3 PAGE11

BMTSBWHT5.5-245-5 PAGE11

None

181

BMTSBWHT5.5-235-3 PAGE11

BMTSBWHT5.5-245-5 PAGE11

None

Composite Panel Fasteners for Kingspan® KS1000AWP® Type Panels

TONGUE FIXINGS Insulation CORE Thickness (mm)

42

A2 Stainless for C3 and C4 Corrosivity Environments Steel Substrates

Timber Substrate

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

(≥ C16)

45

BMTSBWHT5.5-80-3 PAGE11

BMTSBWHT5.5-85-5 PAGE11

None

50

BMTSBWHT5.5-80-3 PAGE11

BMTSBWHT5.5-105-5 PAGE11

None

60

BMTSBWHT5.5-105-3 PAGE11

BMTSBWHT5.5-105-5 PAGE11

None

70

BMTSBWHT5.5-105-3 PAGE11

BMTSBWHT5.5-125-5 PAGE11

None

80

BMTSBWHT5.5-105-3 PAGE11

BMTSBWHT5.5-125-5 PAGE11

None

100

BMTSBWHT5.5-135-3 PAGE11

BMTSBWHT5.5-150-5 PAGE11

None

120

BMTSBWHT5.5-150-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

140

BMTSBWHT5.5-185-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

150

BMTSBWHT5.5-185-3 PAGE11

BMTSBWHT5.5-245-5 PAGE11

None

TRAPEZOIDAL PANELS IN C3 AND C4

EUROBOND INSULATED PANELS

Composite Panel Fasteners for Eurobond® Europanel® Type Panels

Insulation CORE Thickness (mm)

A2 Stainless for C3 and C4 Corrosivity Environmentss Steel Substrates

Timber Substrate

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

(≥ C16)

BMTSBWHT5.5-105-3 PAGE11

BMTSBWHT5.5-125-5 PAGE11

None

100

BMTSBWHT5.5-135-3 PAGE11

BMTSBWHT5.5-150-5 PAGE11

None

125

BMTSBWHT5.5-150-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

150

BMTSBWHT5.5-185-3 PAGE11

BMTSBWHT5.5-245-5 PAGE11

None

175

BMTSBWHT5.5-235-3 PAGE11

BMTSBWHT5.5-245-5 PAGE11

None

200

BMTSBWHT5.5-235-3 PAGE11

BMTSBWHT5.5-245-5 PAGE11

None

240

BMTSBWHT5.5-275-3 PAGE11

None

None

75

Composite Panel Fasteners for Eurobond® Rockspan® & Rainspan® Type Panels

Insulation CORE Thickness (mm)

A2 Stainless for C3 and C4 Corrosivity Environmentss Steel Substrates

Timber Substrate

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

(≥ C16)

1BMTSBWHT5.5-135-3 PAGE11

BMTSBWHT5.5-150-5 PAGE11

None

100

BMTSBWHT5.5-135-3 PAGE11

BMTSBWHT5.5-150-5 PAGE11

None

125

BMTSBWHT5.5-150-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

150

BMTSBWHT5.5-185-3 PAGE11

BMTSBWHT5.5-245-5 PAGE11

None

175

BMTSBWHT5.5-235-3 PAGE11

BMTSBWHT5.5-245-5 PAGE11

None

200

BMTSBWHT5.5-235-3 PAGE11

BMTSBWHT5.5-245-5 PAGE11

None

240

BMTSBWHT5.5-275-3 PAGE11

None

None

75

43

FIXING FINDER

TATA INSULATED PANELS Composite Panel Fasteners for TATA® Trisomet® Type Panels

CORE (TROUGH) FIXINGS Insulation CORE Thickness (mm)

A2 Stainless for C3 and C4 Corrosivity Environments Steel Substrates

Timber Substrate

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0mm

(≥ C16)

BMTSBWHT5.5-80-3 PAGE11

BMTSBWHT5.5-85-5 PAGE11

None

60

BMTSBWHT5.5-105-3 PAGE11

BMTSBWHT5.5-105-5 PAGE11

None

80

BMTSBWHT5.5-105-3 PAGE11

BMTSBWHT5.5-125-5 PAGE11

None

100

BMTSBWHT5.5-135-3 PAGE11

BMTSBWHT5.5-150-5 PAGE11

None

120

BMTSBWHT5.5-150-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

135

BMTSBWHT5.5-185-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

40

CROWN (PEAK) FIXINGS Insulation CROWN Thickness (mm)

A2 Stainless for C3 and C4 Corrosivity Environments Steel Substrates

Timber Substrate

≥ 4.0 ≤ 12.0mm

≥ 1.2 ≤ 4.0mm

≥ 4.0 ≤ 12.0 mm

72

BMTSBWHT5.5-105-3 PAGE11

BMTSBWHT5.5-125-5 PAGE11

None

92

BMTSBWHT5.5-135-3 PAGE11

BMTSBWHT5.5-150-5 PAGE11

None

112

BMTSBWHT5.5-150-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

132

BMTSBWHT5.5-185-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

152

BMTSBWHT5.5-185-3 PAGE11

BMTSBWHT5.5-235-5 PAGE11

None

167

BMTSBWHT5.5-235-3 PAGE11

BMTSBWHT5.5-235-5 PAGE11

None

Composite Panel Fasteners for TATA® Trimapanel® Type Panels

Insulation Thickness (mm)

A2 Stainless for C3 and C4 Corrosivity Environments Steel Substrates ≥ 1.2 ≤ 4.0mm

(≥ C16)

BMTSBWHT5.5-105-3 PAGE11

BMTSBWHT5.5-125-5 PAGE11

None

90

BMTSBWHT5.5-135-3 PAGE11

BMTSBWHT5.5-150-5 PAGE11

None

120

BMTSBWHT5.5-150-3 PAGE11

BMTSBWHT5.5-185-5 PAGE11

None

70

44

≥ 4.0 ≤ 12.0mm

Timber Substrate

Visit our website www.evolutionfasteners.co.uk for latest product information offers and Evolution news Sales and Customer Service sales@evolutionfasteners.co.uk Tel: +44 (0) 141 647 7100 Fax: +44 (0) 141 647 5100

INDEX Products CODE

PAGE

IS

Fixing insulation to steel and timber

6

A4IS

Fixing insulation to light gauge steel or timber substrates.

7

GIA/ A2GIA

Fixing rigid insulation boards and mineral wool insulation to blockwork, brickwork or concrete substrates

8

Fixing insulation and single ply membrane to plywood, timbers, steel decking and concrete.

9

Fixing cladding and roofing applications to hot and cold rolled purlins/ rails

10

BMTSBWHT

Use in brick-tie channel systems and for fastening aluminium sheeting and panels

11

A4HH

Fixing timber battens, trunking, track and general components into concrete, masonry and timber

MSHH/MSCSK

Fixing timber battens, trunking, track and general components to concrete andmasonry substrates

14-15

Fixing cementitious and other dense boards to timber and metal substrates

16

Fixing timber or composites to steel

17

BMWD

Fastening when stainless steel product is required

18

BMDW

Fixing cementitious and other dense boards to timber and metal substrates

19

Spreading the loading when fixing membrane, insulation and single ply materials in roofing...

20

For securing insulation to timber and sheet steel when used with Evolution drywall, ISâ&#x20AC;&#x2C6;etc

21

ERS

TSBWHT

WHX/WHL

TSTF

SPR/SSSPR

RW//EVNW/ EVPPW/ECW

EVPF 46

Quick through-fix for insulation boards into masonry/ aerated concrete/ brick/ concrete/ stone

12-13

22

Technical INSULATION

PAGE

PIR, PUR, XPS, EPS, PF AND PE INSULATION BOARDS

26-31

GLASS, ROCK, STONE AND MINERAL WOOL ROLLS, BATTENS, MATTRESSES AND BOARDS

32-33

FIXING STRUCTURAL, TRAPEZOIDAL, INSULATION PANELS WITH STEEL OR ALUMINIUM FASCIAâ&#x20AC;&#x2122;S FOR WALLS, ROOFING AND CLADDING

34-44

47

This document is wholly authored and published by Evolution Fasteners UK Ltd (herein referred to as “the company” or “Evolution") This document is intended to be a training tool and educational in nature only.

The contents of this document do not constitute any form of warranty or guarantee. The Company provides an industry leading warranty which is detailed in a separate document.

The use of this document does not alleviate, mitigate or otherwise change the legal obligations, or, statutory and regulatory burdens or undertakings of the reader apropos any law, statute, act, regulation, directive, standard, inter alia.

This includes, but is not limited to the requirements under the Building Regulations and/ or the Construction (Design and Management) Regulations, amongst others.

The Company recommends that on every occasion, the reader of this document undertakes their own research and determination as to whether a product or products are suitable for their specific application.

Readers of this document are implored to seek the advice of the third parties mentioned in this document on their components and inter-compatibility with other parties’ components.

Where references or citations are made, it is in the ‘Harvard Style’ pursuant to the guidance laid out by Imperial College London (Imperial College London, 2017).

ACKNOWLEDGEMENTS, LICENSES, TRADEMARKS AND COPYRIGHT Unless otherwise noted or referenced: all information, text, illustrations and content herein remain the intellectual property of the Company.

Throughout this document, various third-party logos, brand names and trademarks are used under the fair dealings’ provisions of the Copyright, Designs and Patents Act 1988, herein referred to as “the 1988 Act”, specifically pursuant to Sections 29, 29A and 30 of the 1988 Act. The use of such logos, brand names or trademarks is not intended to convey any commercial relationship, or otherwise, between the Company and the third party concerned.

The use of such logos, brand names or trademarks is solely intended to benefit and aid the reader in the initial visual recognition of such third party.

This document is strictly published and provided without prejudice, without recourse, non-assumptist, errors and omissions excepted, no assured value, no liability and all rights reserved.

The use of the UKAS logo and ILAC logo relates only to accredited tests pursuant to our schedule of accreditation, tests out with our schedule are marked “NC”. For the most current version of our schedule please visit www.ukas.com.

TERMS AND CONDITIONS OF SALE GENERAL

DEFECTIVE GOODS

1. (a) All orders placed with Evolution Fasteners UK Limited (”the Company”) by the Company’s customer (“the Buyer”) for the sale and the purchase of goods (“the Goods”)are subject to the terms and conditions set out below which shall constitute the contract between the Company and the Buyer (“the Contract”). No modifications or variations to these terms and conditions and no other terms and conditions shall be valid or effective unless expressly accepted in writing by a director of the Company. (b) Any subsequent orders placed with the Company shall be deemed to be placed subject to these terms and conditions unless expressly agreed otherwise in writing by a Director of the Company.

14. The Company shall at their option repair or replace any goods which are defective as to materials or workmanship provided that:

QUOTATIONS 2. A quotation by the Company does not constitute an offer and the Company reserves the right to withdraw or amend the same at any time prior to the Company’s acceptance of the Buyer’s order. The Buyers purchase order is binding and the Buyer is responsible for

PRICE 3. The price of any goods shall be the Company's list price of the goods prevailing at the date of acceptance of the order by the Company (less any agreed discount).

4. Unless otherwise stated all prices are exclusive of V.A.T. 5. The Company shall be entitled from time to time to vary list price or list prices without prior notice.

PAYMENT 6. Unless otherwise specified in writing by the Company, payment is due on or before the end of the month following that in which the goods were invoiced.

7. Failure by the Buyer to pay for any goods on the due date shall entitle the Company: (a) to cancel the balance (if any) of the contract under which the Buyer has failed to pay for the goods and to recover from the Buyer damages for any loss suffered by the Company as a result of such cancellation, and/or (b) to cancel any other contract or the balance of any other contract which the Company may have with the Buyer and to recover from the Buyer damages for any loss suffered by the Company as a result of such cancellation, and/or (c) to charge the Buyer interest at the rate of 2.5% per month calculated on a day-today basis on the amount due from the date of invoice to the date of actual payment thereof (both before and after any judgement) such interest to be paid on demand.

ACCOUNTS 8. The Company reserves the right to close a credit account at any time without prior notice whereupon the whole of the amount outstanding on such account shall become immediately due and payable in full.

COLLECTION AND DELIVERY 9. Where the Company agrees to deliver any goods to the Buyer: (a) The Buyer shall pay the Company's delivery charges therefore at the rate or rates prevailing at the date of acceptance of the order by the Company or at such other rate or rates as may be agreed between the Company and the Buyer prior to the date of acceptance of the order by the Company. (b) Delivery of the goods shall be made to such place or places as agreed between the Company and the Buyer. (c) The Buyer will ensure that there is adequate access to the place of delivery and that there is made available at the place of delivery adequate labour and other facilities in order to enable the goods to be unloaded promptly and safely and the Buyer will indemnify the Company in respect of any losses costs and expenses incurred by the Company as a consequence thereof and (without prejudice to the generality of the foregoing) the Company shall be entitled to charge the Buyer for the storage of the goods whether at the Company's premises or otherwise. (d) If the Buyer shall refuse for any reason whatsoever to accept delivery of the goods the Buyer will indemnify the Company in respect of all losses costs and expenses incurred by the Company as a consequence thereof and (without prejudice to the generality of the foregoing) the Company shall be entitled to charge the Buyer for the storage of the goods whether at the Company's premises or otherwise. (e) The Company shall be entitled to make part deliveries of the goods and for the purposes of these terms and conditions each such part delivery shall be treated as a separate and independent contract for the sale of goods to the Buyer.

10. (a) Any times stated for collection or delivery shall be a bona fide estimate only and whilst the Company will use all reasonable endeavours to meet any such times stated the Company shall not be liable for any delay howsoever caused. (b) Where no times are stated for collection or delivery the Company will use all reasonable endeavours to make the goods available for collection or to deliver the goods (as the case may be) as soon as reasonably practicable. (c) The Company shall be entitled to stop collection by or to withhold delivery to the Buyer of any goods where at the time collection or delivery payment is due to the Company in respect of any goods supplied to the Buyer under any contract whatsoever.

DAMAGE OR LOSS IN TRANSIT 11. Where the Company is responsible for delivering the goods to the Buyer the Company will at its option repair or replace free of charge any goods lost or damaged in transit provided that: (a) (save in respect of a total loss or non-delivery of the goods) details of any loss or damage have been marked on the copy of the consignment note or delivery documents signed by the Buyer and advised to the Company within 48 hours of delivery and confirmed in writing to the Company with full particulars within 3 days of delivery, and (b) in respect of a total loss or non- delivery of the goods details are advised to the Company in writing (otherwise than on a consignment note or delivery document) with full particulars within (7 days) of the date of the Company's invoice in respect of the goods.

SHORT DELIVERY 12. The Company shall not be responsible for any short delivery unless details thereof are marked on the consignment note or delivery document signed by the Buyer and in the case of loss in transit all the requirements set out in Condition 11(b) above are fulfilled.

STORAGE 13. Where the Company has notified the Buyer that the goods are ready for delivery, the Buyer shall take delivery or arrange for storage. If the Buyer does not so take delivery or arrange for storage within 7 days of notification the Company shall be entitled to invoice and be paid for the goods as though the goods had been duly delivered in accordance with these instructions and the Company may arrange storage either at the Company’s own premises or elsewhere on the Buyer’s behalf and all charges for storage, insurance and demurrage shall be payable by the Buyer.

(a) where any alleged defect is discoverable on an inspection of the goods (whether or not the Buyer shall actually inspect the goods) notification of the alleged defect with full particulars thereof is received by the Company in writing within 7 days of the date of collection or delivery of the goods and in any other case notification of the alleged defect is received by the Company in writing with full particulars thereof within 10 days of the date of collection or delivery of the goods, and (b) the Company is notified in writing with full particulars immediately upon discovery of the alleged defect and is afforded the opportunity of inspecting the goods at the premises of the Buyer or if so required by the Company the Buyer immediately returns the goods to the Company's premises carriage paid (but refundable insofar as the goods are repaired or replaced), and (c) any defect is not due to wear and tear neglect abnormal use misuse or improper adjustment. (d) The Company shall not be liable for transportation or installation charges, for expense of the Buyers for repairs or replacements or for damages for delay or loss of use or other indirect, incidental or consequential damage of any kind.

15. (a) As against a person dealing as a consumer as defined by Section 2(3) of the Consumer Rights Act 2015 the following provisions apply. The Company is under a legal duty to supply products that are in conformity with its obligations. The box below contains a summary of the Buyer’s key legal rights in relation to the Goods. Nothing in these terms will affect the Buyer’s legal rights.

Summary of the Buyer’s key legal rights This is a summary of the Buyer’s key legal rights. These are subject to certain exceptions. For detailed information please visit the Citizens Advice website www. adviceguide.org.uk or call 03454 04 05 06 .

The Consumer Rights Act 2015 says the Goods must be as described, fit for purpose and of satisfactory quality. During the expected lifespan of the Goods the Buyer’s legal rights entitle the Buyer to the following: a)Up to 30 days: if the Goods are faulty, then the Buyer can obtain an immediate refund. b) Up to 6 months: if the Goods cannot be repaired or replaced, then the Buyer is entitled to a full refund, in most cases. c) Up to 6 years: if the Goods do not last a reasonable length of time the Buyer may be entitled to some money back.

See also Exercising your right to change your mind (Consumer Contracts Regulations 2013).

If the Buyer wishes to exercise its legal rights to reject the Goods the Buyer must either return them in person, or post them back, to the Company. The Company will pay the costs of postage or collection. Please telephone the Company for a return label or to arrange collection. The provisions contained in this condition 15(a) do not affect the Buyer’s legal rights in relation to faulty or mis-described products (b)As against a person dealing otherwise than as a consumer as defined by Section 2(3) of the Consumer Rights Act 2015 the provisions contained in Condition 14 above shall be accepted in substitution for and to the entire exclusion of all conditions and warranties and liabilities whatsoever whether express or implied by statute (save those implied by virtue of Section 12 of the Sale of Goods Act 1979) common law usage or otherwise.

16. Save and except as expressly stated in Conditions 14 and 15 above the Company shall not be liable for any defect in the Goods or for any injury or loss resulting from the Goods or any defect therein or from any work done in connection therewith whether such liability is due to the negligence of any servant employee or agent of the Company or otherwise.

17. As against a person dealing otherwise than as a consumer as defined by Section 2(3) of the Consumer Rights Act 2015 in the event that the Company shall be liable to repair or replace the Goods, in no circumstances shall the Company’s liability extend beyond the cost of repair or replacing the Goods. In any event, notwithstanding anything contained in the contract, as against such person in no circumstances shall the Company be liable in contract, tort (including negligence or breach of statutory duty) or otherwise howsoever and whatsoever the cause thereof: i.For any increased costs or expenses ii. For any loss or profit, business contracts, revenues or anticipated savings or iii. For any special direct or consequential damage of any nature whatsoever said to have occurred consequent on the supply or the circumstances of the supply of the Goods.

RETURNED GOODS 18. (a) Where returned Goods are found to be damaged due to the Buyer's fault the Buyer will be liable for the cost of remedying such damage (b) The Company will not accept Goods for credit or rectification unless such return has been pre-authorised by the Company, and the Goods are received by the Company in stock condition, with original packaging and the Company retains the right at its sole discretion whether to accept the return of the Goods or whether to rectify the Goods or whether to issue a credit note in respect thereof. (c) The Buyer shall unless otherwise stated be responsible for the cost of outward and return carriage and insurance of all Goods returned by the Buyer to the Company for rectification or credit which Goods shall be at the risk of the Buyer until actual receipt of the Goods by the Company. The onus of proof of safe delivery shall rest with the Buyer. (d) All Goods returned to the Company by prearrangement and found to contain no fault, will be subject to a 30% restocking charge, providing the Goods are in original stock condition. Any downward variation of this restocking charge shall be at the sole discretion of the Company. (e) No credit shall be allowed for Goods until they have been received complete.

FORCE MAJEURE 19. (a) The Company shall not be responsible for any loss damage delay or nonperformance of any contract arising whether directly or indirectly from any cause outside the control of the Company including (but without prejudice to the generality of the foregoing) any cause arising from or attributable to strike lock-out shortage of labour or materials governmental action civil commotion riots wars sabotage storm flood earthquake drought machinery breakdown failure of plant collapse of structures voluntary or mandatory compliance with any direction request or order of any person having or appearing to have authority whether for defence or other governmental or national purposes inability to obtain raw materials equipment fuel power components or transportation. (b) In the event of any delay or non- performance of any contract arising whether directly or indirectly from any cause referred to in Condition 19(a) above the Company shall be entitled to cancel any contract without payment to the Buyer in respect of any loss or damage or otherwise.

TITLE AND RISK 20.1The risk in the Goods shall pass to the Buyer on completion of delivery.

20.2 Title to the Goods shall not pass to the Buyer until the earlier of: (a) the Company receiving payment in full (in cash or cleared funds) for the Goods and any other goods that the Company has supplied to the Buyer, in which case title to the Goods shall pass at the time of payment of all such sums; and (b) the Buyer reselling the Goods, in which case title to the Goods shall pass to the Buyer at the time specified in clause 20.4.

20.3 Until title to the Goods has passed to the Buyer, the Buyer shall: (a) store the Goods separately from all other goods held by the Buyer so that they remain readily identifiable as the Company's property; (b) not remove, deface or obscure any identifying mark or packaging on or relating to the Goods; (c) maintain the Goods in satisfactory condition and keep them insured against all risks for their full price from the date of delivery; (d) notify the Company immediately if it becomes subject to any of the events listed in clause 21; and (e) give the Company such information relating to the Goods as the Company may require from time to time.

20.4 Subject to clause 20.5, the Buyer may resell or use the Goods in the ordinary course of its business (but not otherwise) before the Company receives payment for the Goods. However, if the Buyer resells the Goods before that time: (a) it does so as principal and not as the Company’s agent; and (b) title to the Goods shall pass from the Company to the Buyer immediately before the time at which resale by the Buyer occurs.

20.5 If before title to the Goods passes to the Customer the Customer becomes subject to any of the events listed in clause 21, then, without limiting any other right or remedy the Company may have: (a) the Buyer's right to resell the Goods or use them in the ordinary course of its business ceases immediately; and (b) the Company may at any time: (i) require the Buyer to deliver up all Goods in its possession that have not been resold, or irrevocably incorporated into another product; and (ii) if the Buyer fails to do so promptly, enter any premises of the Buyer or of any third party where the Goods are stored in order to recover them.

20.6 Each and every sub-clause of this clause shall be deemed to be separate from the remainder of the contract and severable accordingly.

TERMINATION 21.1 Without limiting its other rights or remedies, the Company may terminate this Contract with immediate effect by giving written notice to the Buyer if: (a) the Buyer commits a material breach of any term of the Contract and (if such a breach is remediable) fails to remedy that breach within 7 days of that party being notified in writing to do so; (b) the Buyer takes any step or action in connection with its entering administration, provisional liquidation or any composition or arrangement with its creditors (other than in relation to a solvent restructuring), being wound up (whether voluntarily or by order of the court, unless for the purpose of a solvent restructuring), having a receiver appointed to any of its assets or ceasing to carry on business or, if the step or action is taken in another jurisdiction, in connection with any analogous procedure in the relevant jurisdiction; (c) the Buyer suspends, threatens to suspend, ceases or threatens to cease to carry on all or a substantial part of its business; or (d) the Buyer's financial position deteriorates to such an extent that in the Company's opinion the Buyer's capability to adequately fulfil its obligations under the Contract has been placed in jeopardy.

21.2 Without limiting its other rights or remedies, the Company may suspend provision of the Goods under the Contract or any other contract between the Buyer and the Company if the Buyer becomes subject to any of the events listed in clause 21.1(a) to clause 21.1(d), or the Company reasonably believes that the Buyer is about to become subject to any of them, or if the Buyer fails to pay any amount due under this Contract on the due date for payment.

21.3 Without limiting its other rights or remedies, the Company may terminate the Contract with immediate effect by giving written notice to the Buyer if the Buyer fails to pay any amount due under the Contract on the due date for payment.

21.4 On termination of the Contract for any reason the Buyer shall immediately pay to the Company all of the Company's outstanding unpaid invoices and interest.

21.5 Termination of the Contract shall not affect any of the parties' rights and remedies that have accrued as at termination, including the right to claim damages in respect of any breach of this Contract that existed at or before the date of termination.

21.6 Any provision of the Contract that expressly or by implication is intended to come into or continue in force on or after termination shall remain in full force and effect.

GOVERNING LAW AND JURISDICTION 22. The Contract and all contracts between the Company and the Buyer shall in respects be governed by English law and all disputes which may arise out of or in connection with these Conditions or the Contract or any contract between the Company and the Buyer or any Goods supplied or to be supplied under the Contract or any contract shall be subject to the exclusive jurisdiction of the English Courts save that the Company shall be at liberty to bring any legal proceedings against the Buyer in the Courts of any other country which it considers appropriate.

23. In the event that the Company shall bring any legal proceedings against the Buyer in connection with these Conditions or the Contract or any contract between the Company and the Buyer or any Goods supplied or to be supplied under the Contract or any contract between the Company and the Buyer the Buyer shall indemnify the Company against all costs and expenses incurred by the Company in connection therewith on a full indemnity basis.

THIRD PARTIES 24. For the avoidance of doubt nothing in these terms and conditions are intended to confer on any third party any benefit or the right to enforce any terms within the conditions.

Visit our website www.evolutionfasteners.co.uk for latest product information offers and Evolution news Administration and Accounts Tel: +44 (0) 20 8905 2759 Fax: +44 (0) 20 8207 0044 Sales and Customer Service Tel: +44 (0) 141 647 7100 Fax: +44 (0) 141 647 5100 Email: sales@evolutionfasteners.co.uk

WW W. EV OL UT IO NF AS TE NE RS .CO .U K

Copyright 2020 Evolution Fasteners (UK) Ltd. All rights reserved.