Redashe Hose Reels by ERIKS UK & Ireland

Robust Hose Reels for Industry ERIKS Fluid Power, Transfer and Control

ERIKS Industrial Products, Services & Solutions

Introduction

What is a Hose Reel? • A hose reel is a hose storage device

which ensures a hose is always accessible and ready for use. The hose is stored in a coil on the reel which helps to prevent damage to the hose when not in use. There is less of a tendency for the hose to twist on a reel, which makes the hose more effective by improving flow. • There are significant Health & Safety advantages in using hose reels. Hoses lying on the floor can cause slips, trips and falls, and can be easily kinked or damaged. • 50% of accidents in the workplace are caused by trip hazards.

Why use Hose Reels? • Hose reels provide a quick and easy

system for storage and retrieval of hoses, instead of having hoses tangled on the floor. The use of a hose reel can save valuable labour time by always having the hose available for immediate use.

Benefits • Increased workshop efficiency *

Remove potential trip hazards * Enhance the working environment * Extend hose life • Reduce leaks

ERIKS Maidenhead Heathrow Airport Cable Reels Case Study Following a request from Heathrow, Maidenhead branch contacted Redashe for custom cable reels. A site visit followed and a detailed specification was completed to ensure the customer’s expectations and approvals were achieved. 1 Heavy duty, high amperage, battery charging reels for ceiling mounting in the POD vehicle repair workshop. The introduction of these four reels has improved workshop safety be removing trip hazards and potential electrical short circuits. 2 Following a successful trial of a cable reel for Terminal 5 Sky Bridges, a further 60 reels were delivered. These are used to connect thermostats for the ground based, heating and air conditioning system. The cables are yellow for high visibility and the reels have slow retraction for safety. Because the heating and air-con systems are no longer operating continuously when aircraft are parked, there have been significant power savings as a result and these savings are set to continue. The payback time on these cable reels is only a matter of months.

Contents Retracta Spring Rewind Hose Reels

4-5

Polypropylene Hose Reels

6-7

Powder Coated Hose Reels

8-9

Hi Visibility Hose Reels

10-11

Safety Hose Reels

12-13

Stainless Steel Hose Reels

14-19

Cable Reels

20-21

Static Discharge Reels

22-23

Retracta Spring Rewind Hose Reels

Features: • Tough, corrosion free polypropylene construction • Lightweight - average just 10kg, easy to install • Supplied with fitted hose for specified application • Fully automated hose rewind for neat and tidy storage • Positive spring loaded latching mechanism allows the latching of hose at any

length

• Virtually maintenance free • Choice of lockable mounting brackets • Positive spring loaded latching mechanism • Completely serviceable - all parts readily available • The Retracta reels can be fitted indoors or outdoors • Stainless steel mouth for improved hose and reel service life

10 Years Warranty & Parts Guarantee

ERIKS Industrial Products, Services & Solutions

Product Code

Application

Hose Length

Hose Size

Hose Type

Working Pressure

Inlet Size

Hose Outlet

Reel Colour

1238-AR100

Compressed Air

20m

10mm

Reinforced PVC

16 bar

3/8" BSP (F)

1/4" BSP (M)

Red

1238-AR200

Compressed Air

15m

12.5mm

Reinforced PVC

16 bar

3/8" BSP (F)

3/8" BSP (M)

Red

1238-CW100

Cold Wash 40°C

15m

12.5mm

Reinforced PVC

10 bar

3/8” BSP (F)

Bare Hose

Blue

1238-HW100

Hot Wash 90°C

12m

12.5mm

Reinforced Rubber

10 bar

3/8” BSP (F)

3/8” BSP (M)

Red

1238-HW100P

Propane

15m

10mm

Reinforced Rubber

20 bar

3/8” BSP (F)

3/8" BSP (F)

Red

1238-FQ100

Food Quality Water 95°C

12m

12.5mm

Reinforced Rubber

20 bar

3/8” BSP (F)

3/8" BSP (M)

Red

1238-WHP100

High Pressure Water 95°C

12m

10mm

Wire Reinforced Rubber

205 bar

3/8” BSP (F)

3/8” BSP (M)

Red

1238-WP100

Chemical

15m

10mm

Reinforced PVC

14 bar

3/8” BSP (F)

Bare Hose

Red

1238-OA200

Oxy-Acetylene

10m

10mm

Dual Hose Reinforced Rubber

14 bar

3/8” BSP (F)

3/8" BSP (F)

Blue

1238-OP200

Oxy-Propane

10m

10mm

Dual Hose Reinforced Rubber

14 bar

3/8” BSP (F)

3/8" BSP (F)

Blue

1238-OMP200

Medium Pressure Oil

10m

12.5mm

Wire Reinforced Rubber

69 bar

3/8” BSP (F)

1/2" BSP (M)

Blue

1238-GR100

Grease

10m

6mm

Wire Reinforced Rubber

360 bar

1/4" BSP (F)

1/8" BSP (M)

Black

1238-BH100

Breathing Air

15m

10mm

Reinforced NBR/PVC

12 bar

3/8” BSP (F)

3/8” BSP (M)

Red

Polypropylene Hose Reels

Compact Spring Rewind Hose Reel • The compact size makes this reel ideal for use in smaller workshops where

space is limited • The reels come supplied with fitted hose and a integral wall / overhead mounting bracket • Latching of hose at any length, or a free run option • Low effort easy to use rewind tension • Suitable for use with compressed air

Part Number

Hose Length

Hose Size (I.D.)

Working Pressure

Dimensions (cm)

Weight

1238-YRA100

10m

6mm

150 psi

26H x 16W x 31D

3kg

1238-YRA200

8mm

150 psi

28H x 19W x 33D

3.4kg

Supplied with Hose included

Spring Rewind Hose Reel • The compact size makes this reel ideal for use in smaller workshops where

space is limited

• Hose has no memory and lays flat when in use • Latching of hose a t any length • Fully automatic spring rewind • Complete with a integral pivoting wall bracket, swivels through 180° • Suitable for use with compressed air

Length

Dimensions (cm)

Weight

300 psi / 20 BAR

1/2"

15m

42H x 21W x 43D

9.7kg

300 psi / 20 BAR

3/8"

15m

37H x 19W x 42D

7kg

Temp. °C

Max Pressure

1238-C2753

60°C

1238-C2752

60°C

Supplied with Hose included

Hose Capacity I.D.

Part Number

ERIKS Industrial Products, Services & Solutions

Spring Rewind Hose Reel • Each unit come supplied with fitted hose and a integral wall pivoting mounting

bracket • Fully assembled, includes 3’ connecting hose • Latching of hose at any length • Fully automatic spring rewind • Suitable for use with compressed air and water

Part Number

Hose Capacity I.D.

Length

Dimensions (cm)

Weight

300 psi / 20 BAR

3/8"

15m

40H x 22W x 44D

8.6kg

300 psi / 20 BAR

1/2"

15m

40H x 22W x 44D

9.6kg

60°C

180 psi / 12 BAR

1/4"

10m

31H x 16W x 34D

5.7kg

60°C

180 psi / 12 BAR

5/16"

31H x 16W x 34D

5.7kg

Temp. °C

Max Pressure

1238-C701-100

60°C

1238-C701-200

60°C

1238-C705-100 1238-C705-200 Supplied with Hose included

ABS Compressed Air Reel • The CPAR series spring rewind hose reel is constructed in ABS plastic for a

smooth finish with strength and reliability

• The reel is supplied with fitted hose and a pivoting wall bracket • Low effort easy to use rewind tension

Part Number 1238-CPAR-1120

Hose Size

Length

Max Pressure

Dimensions (cm)

Weight

3/8’’

20m

10 BAR

42H x 18W x 51D

12.3kg

Supplied with Hose included

Powder Coated Hose Reels

Spring Rewind Hose Reel • Constructed in heavy gauge powder coated steel for maximum strength and

reliability, these spring rewind reels provide years of trouble free service with minimum maintenance • The multi-position roller arm adjusts for wall, overhead and floor mounting options • Suitable for Water, Steam, Oil, Grease

Hose Capacity

Inlet / Outlet

Max Pressure

I.D.

Length

1238-P-LPL-125

1/4"

300 psi

1/4"

1238-P-LPL-150

1/4"

300 psi

1/4"

15m

1238-P-LPL-325

3/8"

300 psi

3/8"

1238-P-LPL-350

3/8"

300 psi

3/8"

15m

1238-SHL-N-375

3/8"

300 psi

3/8"

23m

1238-SHL-N-3100

3/8"

300 psi

3/8"

30m

1238-P-LPL-425

1/2"

300 psi

1/2"

1238-SHL-N-450

1/2"

300 psi

1/2"

15m

1238-SHL-N-475

1/2"

300 psi

1/2"

23m

1238-SHL-N-4100

1/2"

300 psi

1/2"

30m

1238-SHL-N-525

3/4"

300 psi

3/4"

1238-SHL-N-550

3/4"

300 psi

3/4"

15m

1238-SHL-N-635

300 psi

11m

1238-SHL-N-650

300 psi

15m

Part Number

Supplied as a bare reel (hose supplied on application) Other pressures available

ERIKS Industrial Products, Services & Solutions

Spring Rewind Hose Reel • All reels come supplied with fitted hose • Latching of hose at any length • Corrosion resistant powder coating • Externally mounted, fully enclosed and lubricated spring assembly • Suitable for floor, wall, ceiling or vehicle mount • Multi position roller guide assemble • Suitable for use with compressed air and water

Inlet / Outlet

Max Pressure

1238-C880-4100L

1/2"

1238-C880-550L

3/4"

1238-C880-650L

Part Number

Hose Capacity I.D.

Length

Dimensions (cm)

Weight

300 psi / 20 BAR

1/2"

30m

69H x 37W x 62D

56kg

300 psi / 20 BAR

3/4"

20m

69H x 37W x 62D

58kg

300 psi / 20 BAR

15m

69H x 37W x 62D

60kg

Supplied with Hose included

Spring Rewind Hose Reel • The 4 position roller guide arm adjusts for wall, overhead or ceiling mounting

positions • All reels come supplied with fitted hose • Latching of hose at any length • Corrosion resistant powder coating • Suitable for use with air, water, oil and grease

Part Number

Inlet / Outlet

Max Pressure

Hose Capacity I.D.

Length

Dimensions (cm)

Weight

Low Pressure Air/Water Reels 1238-C808-350L

3/8''

300 psi

3/8''

15m

55H x 22W x 53D

24kg

1238-C808-450L

1/2''

300 psi

1/2''

15m

55H x 22W x 53D

27kg

1238-C808-466L

1/2''

300 psi

1/2''

20m

55H x 22W x 53D

27kg

Medium Pressure Air/Water Reels 1238-C808-350M

3/8''

2250 psi

3/8''

15m

55H x 22W x 53D

24kg

1238-C808-450M

1/2''

2000 psi

1/2''

15m

55H x 22W x 53D

26kg

1238-C808-466M

1/2''

2000 psi

1/2''

20m

55H x 22W x 53D

27kg

High Pressure Grease/Hydraulic Oil Reels 1238-C808-150H

1/4''

5000 psi

1/4''

15m

55H x 22W x 53D

26kg

1238-C808-365H

3/8"

4000 psi

3/8"

20m

55H x 22W x 53D

31Kg

Supplied with Hose included

Hi Visibility Hose Reels

Spring Rewind Hose Reel • Constructed in heavy gauge mild steel • Highly visible yellow powder coated finish • Rolled and ribbed side discs for strength and reliability • Large 4-way roller guide to reduce hose wear • Floor or wall mounting options • Externally mounted spring canister and swivel assembly for easy maintenance • Suitable for Air, Water, Oil and Diesel

Inlet / Outlet

Max Pressure

1238-CRHA-920

3/8"

1238-CRHA-930

Part Number

Hose Capacity I.D.

Length

2700 psi

3/8"

20m

3/8"

2700 psi

3/8"

30m

1238-CRHA-1320

1/2"

2500 psi

1/2"

20m

1238-CRHA-1330

1/2"

2500 psi

1/2"

30m

1238-CRHA-1910

3/4"

1500 psi

3/4"

10m

1238-CRHA-1920

3/4"

1500 psi

3/4"

20m

1238-CRHA-1930

3/4"

1500 psi

3/4"

30m

1238-CRHA-2510

1200 psi

10m

1238-CRHA-2520

1200 psi

20m

1238-CRHA-2530

1200 psi

30m

Supplied as a bare reel (hose supplied on application)

Spring Rewind Hose Reel • Constructed in heavy gauge mild steel for strength performance and reliability.

The compact size in both height and width make this an ideal unit for both small and large work areas • Externally mounted main spring canister and swivel assembly • Suitable for use with air, oil and water

Part Number

Max Pressure

Hose Capacity I.D.

Length

Dimensions (cm)

Weight

1238-CCTWA-1315

2250 psi

1/2"

15m

37H x 29W x 38D

15Kg

Supplied as a bare reel (hose supplied on application)

ERIKS Industrial Products, Services & Solutions

Manual Rewind Hose Reel • Constructed in heavy gauge mild steel • Highly visible yellow powder coated finish • Rolled and ribbed side discs for strength and reliability • Large 4-way roller guide to reduce hose wear • Floor or wall mounting options • Smooth and positive direct crank design • Suitable for Air, Water, Oil and Diesel

Hose Capacity

Inlet / Outlet

Max Pressure

I.D.

Length

1238-CRWM-1320

1/2"

700 psi

1/2"

20m

1238-CRWM-1340

1/2"

700 psi

1/2"

40m

Part Number

1238-CRWM-1920

3/4"

700 psi

3/4"

20m

1238-CRWM-1940

3/4"

700 psi

3/4"

40m

1238-CRWM-2520

700 psi

20m

1238-CRWM-2530

700 psi

30m

1238-CRWM-2540

700 psi

40m

Supplied as a bare reel (hose supplied on application)

Manual Rewind Hose Reel • This reel eliminates fatigue associated with manual hose coiling. Save time and

increase your productivity by getting hose to the job site more efficiently

• Detachable crank handle • Stainless steel internal plumbing and swivel shaft. • Suitable for Air, Water, and Jetwash

Part Number

Max Pressure

Hose Capacity I.D.

Length

Dimensions (cm)

Weight

1238-CCWNR-1330H

3000 psi

1/2"

30m

61H x 45W x 44D

10.5Kg

Supplied as a bare reel (hose supplied on application)

Safety Hose Reels

Spring Rewind Hose Reel The EZ-Coil™ rewind safety system is a patented rotary dampening system exclusively researched and designed by the engineering department at Coxreels. The EZ-Coil™ rewind safety system controls and eliminates the high-speed recoil motion associated with conventional spring driven hose reels with no increase in the amount of resistance when pulling out the hose. Years of research went in to producing what is now becoming the industry standard in spring driven hose reel safety and technology. Safety Series Features: • Up to 80% slower retraction • Equipped with the EZ-Coil™ Rewind safety System • No electricity required • Pull out tension remains unaffected • Suitable for use with Air, Water and Oil

Part Number 1238-EZ-P-LPL-325

Hose Capacity

Inlet / Outlet

Max Pressure

I.D.

Length

3/8"

300 psi

3/8"

1238-EZ-P-LPL-350

3/8"

300 psi

3/8'

15m

1238-EZ-P-MPL-425

1/2"

3000 psi

1/2"

1238-EZ-MPL-N-450

1/2"

3000 psi

1/2"

15m

Supplied as a bare reel (hose supplied on application)

High Visibility Safety Reel The C2782 multi-functional hi vis safety spring rewind air hose reel • Automatic rewind system which prevents the hose from bunching when

retracting the hose back

• System layers back onto the reel from side to side, neat and tidy every time • Slow retraction system will prevent the hose from speeding back to the reel

if the operator accidentally lets go of the hose, which helps protect the user against injury, and objects from potential damage • Reel is supplied complete with a hybrid polymer hose which lays flat when in use with no recoil effect, and stays flexible even in extremely cold conditions

ERIKS Industrial Products, Services & Solutions

Safety Slowmotion Spring Rewind Hose Reel The slowmotion compact range of reels have additional safety benefits compared to our standard compact range. The compact spring rewind reel operates with a normal retraction system but should the operator lose his grip on the hose then the system senses the overspeed retraction and slows the hose to a safe speed by means of a centrifugal brake. â€˘ This protects the operator, work colleagues, vehicles, surrounding equipment and

of coarse the reel itself.

â€˘ Suitable for compressed air

Hose Length

Hose Size (I.D.)

Working Pressure

Dimensions (cm)

Weight

1238-YRA250SM

15m

8mm

150 psi

36H x 20W x 45D

5.5Kg

1238-YRA300SM

10m

8mm

150 psi

36H x 20W x 45D

5.9kg

Part Number

Supplied with hose included

Part Number

Hose Length

Hose Size (I.D.)

Working Pressure

1238-C2782

15m

3/8''

300 psi

Supplied with hose included

Stainless Steel Hose Reels

Stainless Steel Spring Rewind Hose Reels The SS808 Series stainless steel spring rewind hose reels are constructed in 304-grade stainless steel and other non-corroding materials. These reels are designed for harsh, corrosive environments or where hygiene is of primary importance. Ideally suited for wash down applications in food processing areas, marine and offshore. • Heavy duty stainless steel construction • Double supported solid 1” stainless steel axle • Fully automatic hose rewind for neat and tidy storage • Slotted and drilled mounting hose for easy installation • Latching of hose at any length • Non-snag roller guides reduce hose wear • Externally mounted full flow stainless steel swivel assembly • Supplied as a bare reel (hose supplied at an extra cost)

Part Number

Hose Capacity I.D Length

Max PSI

Inlet / Outlet

Reel Dimensions (cm) W H D

Gross Weight

Low Pressure Stainless Steel Reels 1238-CSS808-350L

3/8"

15m

300

3/8"

20kg

1238-CSS808-450L

1/2"

15m

300

1/2"

20kg

1238-CSS808-465L

1/2"

20m

300

1/2"

21kg

1238-CSS808-465L

3/4"

300

3/4"

21kg

Medium Pressure Stainless Steel Reels 1238-CSS808350M

3/8"

15m

3000

3/8"

21kg

1238-CSS808350M

1/2"

15m

3000

1/2"

21kg

Supplied as a bare reel (hose supplied on application)

Compact Stainless Steel Spring Rewind Hose Reels Compact design constructed in a heavy gauge 304 grade stainless steel for strength, performance and reliability. Designed for harsh, corrosive environments, or where hygiene is of primary importance. They are ideally suited to wash down applications, in food processing and chemical manufacturing, but are also ideal for offshore/marine applications. Their compact size both in height and width make this an ideal unit for both small wash down areas to large processing plants.

ERIKS Industrial Products, Services & Solutions

Stainless Steel Spring Rewind Hose Reels Air/Water/Oil/Diesel - (Max 2500psi) Stainless steel, high capacity spring rewind hose reels. Constructed in heavy gauge 304 grade stainless steel, offering strength performance and reliability, along with a professional and modern look. They are ideally suited to wash down, in food processing, marine & offshore applications. • 304-grade stainless steel construction • Large four-way roller guide to reduce hose wear • Swept riser assembly for easy hose installation • Fitted with viton seals as standard • Latching of hose at any length • Swivels have a twin O’ ring design for extended trouble free service • Externally mounted, fully lubricated spring canister and swivel assembly • 2-year manufacturers warranty

Part Number

Hose Capacity I.D Length

1238-CCRHA-1320SS

1/2"

1238-CCRHA-1330SS

1/2"

1238-CCRHA-1920SS

Reel Dimensions (cm) W H D

Max PSI

Inlet / Outlet

20m

2500

1/2" F

24kg

30m

2500

1/2" F

30kg

3/4"

20m

1500

3/4" F

30kg

1238-CCRHA-1930SS

3/4"

30m

1500

3/4" F

45kg

1238-CCRHA-2520SS

20m

1500

1" F

48kg

Gross Weight

Supplied as a bare reel (hose supplied on application)

• Standard length of hose 15m x 1/2" with a maximum working pressure of 300psi. • Constructed in heavy gauge 304 grade stainless steel • Rolled and ribbed side discs for strength and rigidity • Large 4-way roller guide to reduce hose wear • Externally mounted spring canister • Floor, wall mounting options • Compact Design • 2-year manufacturer’s warranty

Part Number

Hose Capacity I.D Length

1238-CTWA-1315SS

1/2"

15m

Max PSI

Inlet / Outlet

300

1/2" F

Reel Dimensions (cm) W H D 29

Gross Weight 15kg

Supplied as a bare reel (hose supplied on application)

Stainless Steel Hose Reels

Stainless Steel Spring Rewind Reels Constructed in a heavy gauge 304 grade stainless steel for strength, performance and reliability. Designed for harsh, corrosive environments, or where hygiene is of primary importance. They are ideally suited to wash down applications, in food processing and chemical manufacturing, but are also ideal for offshore/marine applications. Suitable for air, water and diesel. • Adjustable full width roller guide • Suitable for floor, wall, ceiling or vehicle mounting • Drum is double supported for strength • Durable nylon hub assemblies

Part Number

Hose Capacity I.D Length

1238-CAV3500

1/2"

1238-CAV3501

3/4"

Inlet / Outlet

30m

3000

1/2"

30kg

20m

300

31kg

Supplied as a bare reel (hose supplied on application)

Reel Dimensions (cm) W H D

Max PSI

Gross Weight

ERIKS Industrial Products, Services & Solutions

Stainless Steel Portable Reels Air/Water/Oil - (Max 700psi) The Redashe CCPOR series hose reels offer a lightweight, portable means to transport longer lengths of hose around the workplace or site area. Constructed in a heavy gauge, 304 grade stainless steel and finished in a semi polished finish. Units are supplied as standard with 150mm wheels for ease of transportation over uneven surfaces. • 304 Grade, stainless steel construction • Full flow swivel assembly for maximum product delivery • Shaft constructed in stainless steel, body constructed in nickel-plated milled

brass

• Swivels have a twin O’ ring design for extended trouble free service • Fitted with viton seals as standard • Direct hand crank design

Part Number

Hose Capacity I.D Length

1238-CCPOR-1345SS

1/2"

1238-CCPOR-1930SS

3/4"

Reel Dimensions (cm) W H D

Max PSI

Inlet / Outlet

45m

700

1/2" F

110

27kg

30m

700

3/4" F

110

27kg

Max PSI

Inlet / Outlet

3000

Gross Weight

Supplied as a bare reel (hose supplied on application)

Part Number

Hose Capacity I.D Length

1238-CAV1200

1''

Reel Dimensions (cm) W H D 29

Gross Weight 21kg

1238-CAV1300

1''

15m

300

1''

24kg

1238-CAV6000

1/2''

60m

3000

1/2''

50kg

1238-CAV6001

1''

30m

300

1''

51kg

Supplied as a bare reel (hose supplied on application)

Stainless Steel Hose Reels

Stainless Steel Manual Rewind Hose Reels High capacity CRWM-SS series of manual rewind hose reels. Constructed in a heavy gauge 304 grade stainless steel, which offers Strength, performance and reliability, along with a professional, modern look. Capacities range from 20m x 1/2" to 30m x 1" of internal bore hose, with working pressures up to 700psi. They are ideally suited to wash down applications, in food processing and chemical manufacturing, but are also ideal for offshore/marine applications. The compact size both height and width make this range of reel a must for applications where longer and larger hoses are required. • Constructed in heavy gauge 304 grade stainless steel • Rolled and ribbed side discs for strength and rigidity • Large 4-way roller guide to reduce hose wear • Floor or wall mounting options • Smooth and positive direct crank design in capacities up to 40m • 2-year manufacturer’s warranty

Part Number

Hose Capacity I.D Length

1238-CRWM-1320SS

1/2"

1238-CRWM-1340SS

Reel Dimensions (cm) W H D

Max PSI

Inlet / Outlet

20m

700

1/2" F

18kg

1/2"

40m

700

1/2" F

22kg

1238-CRWM-1920SS

3/4"

20m

700

3/4" F

26kg

1238-CRWM-1940SS

3/4"

40m

700

3/4" F

35kg

1238-CRWM-2520SS

20m

700

1" F

30kg

1238-CRWM-2530SS

30m

700

1" F

36kg

Supplied as a bare reel (hose supplied on application)

Stainless Steel Manual Rewind Hose Reel The CAVM9002 series stainless steel hand cranked hose reels are constructed in 304 grade stainless steel and other non-corroding materials. These reels are designed for harsh, corrosive environments or where hygiene is of primary importance. Ideally suited for wash down applications in food processing areas, marine and offshore. • Drum is double supported for strength • Durable nylon hub assemblies • Suitable for floor, wall, ceiling or vehicle mounting options • Simple design - easy to use

Gross Weight

ERIKS Industrial Products, Services & Solutions

Stainless Steel manual rewind Reel Air/Oil/Water/Diesel (Max 300psi) The CTWM compact hose reel is constructed in a heavy gauge 304 grade stainless steel for strength, performance and reliability. Designed for harsh, corrosive environments or where hygiene is of primary importance, they are ideally suited for wash down application in food processing or chemical manufacturing and ideal for offshore and marine applications. • Constructed in 304 grade stainless steel • Rolled and ribbed side discs for strength and rigidity • Large 4 way roller guide to reduce hose wear • Compact design • Floor & wall mount options

Part Number

Hose Capacity I.D Length

1238-CTWM-1350SS

1/2"

15m

Max PSI

Inlet / Outlet

300

1/2" F

Reel Dimensions (cm) W H D 39

Gross Weight 9.5kg

Supplied as a bare reel (hose supplied on application)

Part Number

Hose Capacity I.D Length

1238-CAVM9002

1/2"

20m

Max PSI

Inlet / Outlet

3000

1/2"

Reel Dimensions (cm) W H D 32

Gross Weight 10kg

Supplied as a bare reel (hose supplied on application)

Cable Reels

3 Phase Cable Reel The Reelworks 6888 Series 3 Phase Cable Reel has been developed for industrial applications where a heavy duty, spring rewind reel is required to increase productivity and efficiency. Mounting the cable onto the reel ensures tangle free performance while extending the working life of the cable. • Supplied with 15m of 5 core 2.5mm² cable

Model Reference 1238-C6888-380V-50

Amps

Cable inc cable

Length

Yes

15m

Volts

Wattage Rolled/ Extended

380

5000w 7200w

Packed Dimensions (cm) W H D

NW/GW (kgs)

16/17.5

Supplied complete with cable

110V Cable Reel The Coxreels PC Series 110v, spring rewind cable reel has been developed for the modern industrial, automotive and construction industries. Helps to replace tangled extension cables, and designed for a more permanent solution to cable storage. These units give long lasting and trouble free performance. • Supplied with 15m x 3core 2.5mm² artic cable • 16Amp male & female plug & stock

Model Reference 1238-SPC13L-110V

Amps 16

Cable inc cable Length Yes 15m

Volts 110

Packed Dimensions (cm) W H D 22

Supplied complete with cable

ABS Plastic Cable Reel The New CPER Series, spring rewind, cable reel combines convenient storage of electrical cable. • 20m of 3 core 1.5mm² cable • Suitable for use with small power tools and other electrical appliances • Constructed in ABS Plastic for a smooth finish with strength and reliability.

The reel is supplied as standard with a fitted cable and pivoting wall bracket

NW/GW (kgs) 18kg

ERIKS Industrial Products, Services & Solutions

Polypropylene Spring Rewind Cable Reel The 605 Series cable reels combine the convenient storage of 3 core electrical cable with fast payout and automatic spring rewind. • 15m of cable • Suitable for use with power tools and other electrical appliances • Constructed in high impact UV stabilized polypropylene for maximum strength

and durability

• All reels are supplied as standard with fitted cable

Model Reference 1238-C605-100

Cable Amps

inc cable

Length

3/10

3 x 1.5mm²

15m

Volts

Packed Dimensions (cm) W H D

240

NW/GW (kgs) 5.2kg

Supplied complete with cable

Compact Spring Rewind Cable Reel The Redashe RC2500/3500 compact cable reels combine convenient storage of 3 core electrical cable with fast payout and automatic spring rewind. • Up to 75’ of cable • Suitable for use with power tools and other electrical appliances. • Constructed in high-impact polypropylene for maximum durability each reel is

supplied with fitted cable and an integral wall mounting bracket.

Model Reference

Cable

Volts

Packed Dimensions (cm) W H D

NW/GW (kgs)

Amps

inc cable

Length

1238-YRC2500

3 x 1.5mm²

20m

240

8.2kg

1238-YRC3500

3 x 1.5mm²

35m

240

12kg

Supplied complete with cable

Model Reference 1238-CPER-120

Cable Amps

inc cable

Length

4/12

3 x 1.5mm²

15m

Volts

Packed Dimensions (cm) W H D

110

NW/GW (kgs) 18kg

Supplied complete with cable

Static Discharge Reels

Static Discharge Cable Reel Redashe SD reels provide convenient storage of static grounding cable with fast payout and automatic spring rewind. Designed for safe and reliable grounding of vehicles, aircraft and other equipment requiring static bonding. These heavy duty reels are supplied complete with 35’, 50’, 75’ or 100’ of orange vinyl covered galvanised steel cable. Finished in a durable coating of blue baked powder paint all models feature a multi-position rewind guide arm and latching of cable at any length. • Heavy duty construction • Fully automatic spring rewind • Non-sparking latching mechanism • 4mm galvanised steel cable with high-visibility orange vinyl cover • 50 amp grounding clamp • Multi-position rewind guide arm • 1” solid steel axle • Durable blue powder coat finish • Cartridge style spring motor • Zinc plated current path • Maximum resistance 2.6 ohm (SD-100)

Cable O.D

Length

Max Resistance

1238-SD-35

4mm

35ft

1238-SD-50

4mm

1238-SD-75 1238-SD-100

Model Reference

Supplied complete with cable

Packed Dimensions (cm) W

NW/GW (kgs)

1.0 ohm

50ft

1.3 ohm

4mm

75ft

2 ohm

4mm

100ft

2.6ohm

ERIKS Industrial Products, Services & Solutions

Static Discharge Cable Reel The Redashe CCER Series, static grounding reel provides convenient storage of grounding cable with fast payout and automatic spring rewind. Designed for safe and reliable grounding of vehicles, aircraft and other equipment requiring static bonding. This series come supplied with 20m of coated galvanised steel cable and are finished in our highly visible & durable yellow powder coated finish. • Heavy-duty steel construction • Fully automatic spring rewind • Supplied with coated galvanised cable • 50 amp grounding clamp supplied as standard • Latching of cable at any length • Factory lubricated main spring assembly • 20m capacity • Ideal for use with refuelling reels • 2 Year manufacturers warranty

Model Reference 1238-CCER-320-1

Cable O.D

Length

Max Resistance

3mm

20m

2.0 ohm

Packed Dimensions (cm) W

NW/GW (kgs)

Supplied complete with cable

Amber Way, Halesowen, West Midlands, B62 8WG

0121 508 6000

www.eriks.co.uk

UNREGISTERED

ERIKS UK & Ireland