Saunders s360 Actuator DN8 DN100 ERIKS

brands you trust.

Saunders速 S360 Actuator DN8-DN100 (0.25" to 4.00")

www.cranecpe.com

Saunders® S360 Actuator Overview The Saunders® S360 piston actuator permits remote operation of the valve, either as an alternative to manual operation or as an integral part of a control system. The S360 is a compact, lightweight, piston-type pneumatic actuator which has been developed to deliver superior performance for sterile BioPharm applications.

Key Features

 Modular range delivers compact dimensional

envelope to reduce dead-leg between associated valves and optimises system design.

 Maintenance free piston technology provides powerful closure performance.

 Smooth corrosion resistant profile optimises cleanability.

The Saunders® S360 housing is manufactured from polished 316 Stainless Steel producing a robust design, a clean OD profile and an attractive appearance. It can withstand typical industry wash down regimes.

The S360 is a piston-type actuator that provides reliable performance, high cycle life, lower air consumption and more compact design versus diaphragm type actuators.

The modular design offers two different spring- to-close versions; the S360 Lite with compact, lightweight design for typical applications and the S360 Power for maximum high pressure duty or for severe closure applications.

The S360 range also includes normally open, double acting, and options for limiting travel and direct switch mount variations. All models have a bright yellow visual indicator as standard.

2

www.cranecpe.com www.SaundersS360.com

Saunders® S360 Actuator Features and Benefits Full 360° Rotation DN15-DN50 (0.5" - 2.0") The Saunders® S360 features the ability to fully rotate the actuator head by 360°, enabling flexible installation and air port alignment.

Easy Compressor Change The Saunders® S360 has a unique compressor attachment that permits easy conversion of the compressor between rubber and PTFE diaphragms.

This in turn reduces installation cost and optimizes incorporation into compact valving arrays or skid arrangements.

Rubber Diaphragm

PTFE Diaphragm

Refer to the Installation, Operation, and Maintenance Manual for complete instructions on 360° rotation and compressor conversion.

www.cranecpe.com www.SaundersS360.com

3

Saunders® S360 Actuator Typical Applications The Saunders® S360 Actuator has been designed and engineered to deliver optimum performance over the full range of operating conditions found in bioprocess plants. The diaphragm in a weir type diaphragm valve has a large wetted surface that is exposed to pressure in the process line.

This means that line pressure has a large impact on required actuator opening and closing forces.

The majority of applications produce pressure on one side of the weir only. This condition is typically called 100% pressure drop, or 100% ΔP. When this occurs, only half the wetted area of the diaphragm is exposed to line pressure.

100% Pressure Drop line-pressure is on one side of weir only This is the most common service condition.

The force on the diaphragm is greatest when there is pressure on both upstream and downstream sides of the weir. This condition is generally called 0% pressure drop, or 0% ΔP. When this occurs the total wetted area of the diaphragm is exposed to line pressure. This is not a common condition in BioPharm applications.

0% Pressure Drop line-pressure is on both sides of weir Maximum force is working against actuator.

Please contact Saunders® directly or review actuator sizing charts and data sheets for additional information regarding actuator selection. Technical information, sizing charts, and datasheets can be accessed or downloaded at www.cranebiopharm.com.

4

www.cranecpe.com www.SaundersS360.com

Saunders® S360 Actuator Technical Specifications Modular Design The Saunders® S360 modular range delivers optimum dimensional envelope and closure performance. There are two different normally closed versions available; the S360 Lite and S360 Power actuator that delivers industry leading closure performance and allows complete flexibility to suit a wide range of pressure and flow conditions.

Saunders® S360 Lite

The S360 Lite range provides standard closure for normally closed applications in a very compact, lightweight package and is ideal for most applications. The S360 Lite fits into tight piping arrays – and its compact size can even help reduce block valve design and is available through sizes DN8 – DN100 (0.25” – 4.00”).

DN8 DN 15 (0.25”) (0.50")

DN20 (0.75")

DN25 (1.00")

DN40 (1.50")

DN50 (2.00")

DN65 (2.50")

DN80 (3.00")

DN100 (4.00")

Closure Performance (Saunders® S360 Lite Normally Closed) Line Pressure Size

PTFE

Rubber

Control Pressure

Weight

DN8 (0.25")

16bar (232psi)

16bar (232psi)

6bar (87psi)

0.6kg (1.32lbs)

DN15 (0.50")

10bar (145psi)

10bar (145psi)

6bar (87psi)

1.20kg (2.6lbs)

DN20 (0.75")

10bar (145psi)

10bar (145psi)

6bar (87psi)

2.10kg (4.62lbs)

DN25 (1.00")

10bar (145psi)

10bar (145psi)

6bar (87psi)

2.3kg (5.06lbs)

DN40 (1.50")

10bar (145psi)

10bar (145psi)

6bar (87psi)

3.50kg (7.7lbs)

DN50 (2.00")

10bar (145psi)

10bar (145psi)

6bar (87psi)

7.70kg (17lbs)

DN65 (2.50")

10bar (145psi)

10bar (145psi)

6bar (87psi)

17.5kg (38.6lbs)

DN80 (3.00")

10bar (145psi)

10bar (145psi)

6bar (87psi)

32kg (70.6lbs)

DN100 (4.00")

10bar (145psi)

10bar (145psi)

6bar (87psi)

35.8kg (78.9lbs)

All pressures are gauge pressures. Line pressure values were determined with pressure on one side of the weir only. This condition is called 100% pressure drop, or 100% ΔP. Information on line pressure applied to both upstream and downstream sides of the weir is available on request.

www.cranecpe.com www.SaundersS360.com

5

Saunders® S360 Actuator Technical Specifications Saunders® S360 Power The Saunders® S360 Power range offers higher operating closure performance in a compact package for high operating pressure or atypical closing conditions with high pressure on both sides of the weir. The S360 Power normally closed actuator is available through sizes DN15 – DN50 (0.50” – 2.00”).

DN15 (0.50")

DN20 (0.75")

DN25 (1.00")

DN40 (1.50")

DN50 (2.00")

Closure Performance (Saunders® S360 Power Normally Closed) Line Pressure Size

PTFE

Rubber

Control Pressure

Weight

DN15 (0.50")

16bar (232psi)

16bar (232psi)

6bar (87psi)

1.2kg (2.6lbs)

DN20 (0.75")

16bar (232psi)

16bar (232psi)

6bar (87psi)

2.8kg (6.2lbs)

DN25 (1.00")

16bar (232psi)

16bar (232psi)

6bar (87psi)

2.9kg (6.4lbs)

DN40 (1.50")

16bar (232psi)

16bar (232psi)

6bar (87psi)

5.8kg (12.8lbs)

DN50 (2.00")

16bar (232psi)

16bar (232psi)

6bar (87psi)

9.7kg (21.4lbs)

All pressures are gauge pressures. Line pressure values were determined with pressure on one side of the weir only. This condition is called 100% pressure drop, or 100% ΔP. Information on line pressure applied to both upstream and downstream sides of the weir is available on request.

The Saunders® S360 actuator is also available in normally open and double acting modes of operation through sizes DN8 – DN100 (0.25” – 4.00”). Please refer to Saunders® data sheets for additional information on S360 normally closed and double acting variants. Technical information, sizing charts, and datasheets can be accessed or downloaded at www.saundersS360.com.

PDF dimensional drawings, 2D AutoCAD, and 3D IGES Files of the Saunders® S360 actuator are available at www.SaundersDrawings.com.

6

www.cranecpe.com www.SaundersS360.com

Saunders® S360 Actuator Accessories Marking Identification label adhered to actuator and contains the following: Valve Size Model Identification Maximum Air Supply

Available Accessories

DN100 S360 Actuator with Adjustable Limit Open Stop

Position Feedback Adjustable Limit Open and Close Stop Valve Positioners Manual Override Other Accessories on Request

Direct Mount I-VUE

Visit www.saundersS360.com for additional information on other Saunders® products, including technical datasheets, drawing library, and product selection tools.

www.cranecpe.com www.SaundersS360.com

7

ERIKS vestigingen Stromingstechniek

ERIKS Servicecenters

Alkmaar Toermalijnstraat 5 1812 RL Alkmaar T (072) 514 15 14 F (072) 515 56 45 E info@eriks.nl

Alkmaar Saffierstraat 3 1812 RM Alkmaar T (072) 514 17 17 F (072) 514 16 25 E esc.alkmaar@eriks.nl

Eerbeek Loubergweg 19 6961 EJ Eerbeek T (0313) 67 95 00 F (0313) 65 47 68 E eerbeek@eriks.nl

Maastricht Amerikalaan 28 6199 AE Maastricht-Airport T (043) 604 91 80 F (043) 363 87 28 E maastricht@eriks.nl

Echt Rijksweg Zuid 19 a 6102 AA ECHT T (0475) 48 48 64 F (0475) 48 55 87 E echt@eriksgaskets.nl

Almelo Plesmanweg 12 7602 PE Almelo T (0546) 87 30 70 F (0546) 87 32 68 E almelo@eriks.nl

Eindhoven Industrieweg 15 5627 BS Eindhoven T (040) 291 19 00 F (040) 291 19 09 E eindhoven@eriks.nl

Rotterdam-Rijnmond Shannonweg 33, Haven 5079 3197 LG Rotterdam-Botlek T (010) 231 34 00 F (010) 296 96 18 E rijnmond@eriks.nl

Vierpolders Seggelant-West 10 3237 MJ Vierpolders T (0181) 28 11 11 F (0181) 28 11 10 E vierpolders@eriksgaskets.nl

Amsterdam Dynamostraat 46 1014 BK Amsterdam-Westpoort T (020) 448 96 10 F (020) 613 77 65 E amsterdam@eriks.nl

Emmen Willem Schoutenstraat 11 b 7825 VV Emmen T (0591) 66 80 00 F (0591) 66 80 06 E emmen@eriks.nl

Roermond Ada Byronweg 11 6045 GM Roermond T (0475) 37 22 70 F (0475) 37 23 05 E roermond@eriks.nl

Arnhem Pieter Calandweg 46 6827 BK Arnhem T (026) 362 92 44 F (026) 361 00 63 E arnhem@eriks.nl

Gouda Marconistraat 117 2809 PG Gouda T (0182) 33 11 60 F (0182) 37 82 02 E gouda@eriks.nl

Terneuzen Communicatielaan 27 b 4538 BV Terneuzen T (0115) 64 10 00 F (0115) 64 10 09 E terneuzen@eriks.nl

Bergen op Zoom Van Konijnenburgweg 44 b 4612 PL Bergen op Zoom T (0164) 27 55 44 F (0164) 27 55 49 E bergenopzoom@eriks.nl

Groningen Rouaanstraat 8 9723 CD Groningen T (050) 368 49 99 F (050) 368 49 98 E groningen@eriks.nl

Zwolle Ampèrestraat 27 8013 PT Zwolle T (038) 467 29 20 F (038) 467 29 29 E zwolle@eriks.nl

Delfzijl Deltaweg 30 9936 HK Farmsum T (0596) 63 38 20 F (0596) 63 38 29 E delfzijl@eriks.nl

Hengelo Hassinkweg 16 7556 BV Hengelo T (074) 291 57 57 F (074) 291 59 39 E hengelo@eriks.nl

Den Haag Neckar 2 2491 BD Den Haag T (070) 381 84 84 F (070) 381 84 36 E denhaag@eriks.nl

Hoorn De Factorij 35 d 1689 AK Zwaag T (0229) 21 28 82 F (0229) 21 93 74 E hoorn@eriks.nl

Ede Galvanistraat 34 6716 AE Ede T (0318) 43 96 14 F (0318) 64 01 04 E ede@eriks.nl

Leeuwarden James Wattstraat 19 8912 AS Leeuwarden T (058) 215 05 87 F (058) 215 85 16 E leeuwarden@eriks.nl

www.eriks.nl