ERIKS valve position detection

VALVE POSITION DETECTION ERIKS IN COOPERATION WITH PEPPERL+FUCHS

Pepperl+Fuchs and ERIKS – a Long-Term Partnership in Valve A pioneering spirit and a firm belief in their own inventive powers – these were the assets that the company founders Walter Pepperl and Ludwig Fuchs started out with when they opened their radio repair shop in Mannheim, Germany, in 1945. Their invention of the proximity switch a few years later proved their strength. It was also the starting point in a successful history defined by close customer relationships as well as innovative automation technologies and procedures.

Then as now, the focus is directed squarely on the individual requirements of each customer. Whether as a pioneer in electrical explosion protection or as a leading innovator of highly efficient sensors, close communication with customers is what allowed Pepperl+Fuchs to become the leader in automation technology.

2

With years of experience in the field of sensor applications in the process industry, Pepperl+Fuchs offers complete sensor solutions for the reliable and efficient operation of your process equipment. Specifically developed sensors for process applications provide accurate measurements and valve position feedback to monitor system status, which is necessary in an energy-efficient facility. With products for both linear travel and rotary travel valves, automated and manually actuated, Pepperl+Fuchs’ sensors can be used in both general-purpose and hazardous locations.

Position Detection ERIKS is an international industrial service and solution provider offering a wide range of high-quality mechanical engineering components and associated technical and logistics services.

ERIKS currently consists of more than 60 companies with branches in 30 countries. ERIKS has a strong position in Western Europe, the United States and a presence in the Middle East and South-East Asia. As a result of the extensive product range and the excellent knowledge of valves, instrumentation, actuation and its applications, ERIKS plays a leading roll for these products in Europe, North- and South-America, the Middle-East and South-East Asia.

ERIKS and associated companies supply a very broad selection of brands and high-quality products from well-known manufacturers all over the world. They are suitable for all industries and applications, ranging from standard products to sustainable and environmentally friendly products.

With our private econ® label , well known all over the world, ERIKS delivers a wide range of valves, actuators, instrumentation and accessories for applications for all industries.

A rapidly growing group of customers is relying on the econ® label for their valves, instrumentation and actuation. Products selected for the econ® label are therefore both sustainable and designed to customers’ requirements.

From the state-of-the-art workshops, ERIKS companies deliver all types of valves, complete with actuators, solenoid valves, limit switches and related accessories. They are all in accordance with customer requirements based on the latest design, standards and legislation.

3

Valve Position Detection

Reliable Valve Position Detection on Manual Valves The Series F31 and F31K inductive dual sensors from Pepperl+Fuchs are an effective solution for valve position detection on manual valves. This series combines two sensing elements in one device and can be mounted directly on the valve – reducing installation and maintenance costs considerably.

Your Benefits at a Glance ▪▪

Reliable valve position monitoring thanks to clear LED indication of switch status

▪▪

Easy installation due to mounting plate

▪▪

Adjustment-free mounting maintains accurate sensing distance

▪▪

Intrinsically safe versions (Ex i) with SIL2 approval available

Mounting plate MH-BT65A including puck

F31 sensor

Bracket

econ® ball valve

F31 Series

F31K Series

Sensor Selection Sensor type code

Solenoid connection

System connection

Electrical connection

NBN3-F31-E8-V18

none

M18x1 connector, 4 pin

10 - 30 VDC, 3-wire

NBN3-F31-Z8-V18

none

M18x1 connector, 4 pin

6 - 60 VDC, 2-wire

NBN3-F31-E8-V1

none

M12 connector, 4 pin

10 - 30 VDC, 3-wire

NBN3-F31-N4-V18

none

M18 connector, 4 pin

Namur Ex i

NCN3-F31K-N4-K

Cable gland M12

NBN3-F31K-E8-K

Cable gland M12

NBN3-F31K-Z8-K

Cable gland M12

4

Terminal compartment with cable gland M20 Terminal compartment with cable gland M20 Terminal compartment with cable gland M20

Namur Ex i 10 - 30 VDC, 3-wire 6 - 60 VDC, 2-wire

Reliable Valve Position Detection on Quarter-Turn Valves The Series F25 and F31 inductive dual sensors from Pepperl+Fuchs are best suited for position feedback of the open/closed position on quarter-turn valves. The variable dual sensors enable direct, stable, and durable mounting on all standard pneumatic actuators.

Your Benefits at a Glance ▪▪

Direct mounting on pneumatic actuated ball and butterfly valves

▪▪

Small sensing face ensures no pinch-point hazard between sensor and puck

▪▪

Easy installation and maintenance of the valve package – no extra mounting accessories required

▪▪

Suitable for outdoor use

▪▪

Versions available for all hazardous areas

F31 Series

F25 Series

Sensor Selection Sensor type code

Solenoid connection

System connection

Electrical connection

NBN3-F25-E8-V1

none

M12x1 connector, 4 pin

10 - 30 VDC, 3-wire

NBN3-F31-E8-V18

none

M18x1 connector, 4 pin

10 - 30 VDC, 3-wire

NBN3-F31-Z8-V18

none

M18x1 connector, 4 pin

6 - 60 VDC, 2-wire

NBN3-F31-E8-V1

none

M12 connector, 4 pin

10 - 30 VDC, 3-wire

NBN3-F31-N4-V18

none

M18 connector, 4 pin

Namur Ex i

5

Valve Position Detection

Easy Wiring and Connection The Series F31K inductive dual sensors from Pepperl+Fuchs offer you the ability to connect all wires in a terminal compartment with an IP67 degree of protection. A solenoid valve can easily be wired via the sensor.

Your Benefits at a Glance ▪▪

Direct mounting on all standard actuators

▪▪

Easy connection of all wires in a terminal compartment

▪▪

Small sensing face ensures no pinch-point hazard between sensor and puck

▪▪

Suitable for outdoor use

▪▪

Versions available for all hazardous areas

F31K Series with terminal compartment

Sensor Selection Sensor type code

Solenoid connection

System connection

Electrical connection

NCN3-F31K-N4-K

Cable gland M12

Terminal compartment with cable gland M20

Namur Ex i

NBN3-F31K-E8-K

Cable gland M12

Terminal compartment with cable gland M20

10 - 30 VDC, 3-wire

NBN3-F31K-Z8-K

Cable gland M12

Terminal compartment with cable gland M20

6 - 60 VDC, 2-wire

6

Flexible Network Solution with AS-Interface AS-Interface is a very flexible and reliable network solution designed for use in both hazardous and non-hazardous areas. For Zone 1 hazardous areas, an AS-Interface valve is used. AS-Interface allows easy connection to PROFIBUS, DeviceNet, Ethernet, Modbus, CANopen networks.

Your Benefits at a Glance

F31 sensor AS-Interface connector

▪▪

Up to 62 valves can be connected

▪▪

Easy installation and maintenance due to automatic address assignment via bus connection

▪▪

Stable valve position monitoring of all connected actuators at cycle times of < 5 or 10 ms

▪▪

Data and power on one cable avoids parallel wiring – saving installation costs

▪▪

Open standard with connection to all well-known fieldbus systems

Solenoid valve

Valve connector

Order Your Kit Consisting of a Pepperl+Fuchs AS-Interface Sensor and an Asco Solenoid Valve Type code

Description

NCN3-F31-B3B-V1-V1

AS-Interface sensor F31

VAZ-T1-FK-G10-V1

AS-Interface connector M12

BT65A

Puck for actuators 30 mm x 80 mm mounting pattern

SCXG551A001MS 24VDC X=TPL26154

Solenoid valve 2 Watt

VMBI-2+P/Z2-0,3M-PVC-V1W

Valve connector DIN Form BI

7

ERIKS Valve Automation Centers The “Valve Automation Centers“ across the ERIKS companies worldwide have a state-of-the-art workshop where well-trained technicians assemble valves with pneumatic, hydraulic and electric actuators. Valves and actuators can be completed with positioners, position indicators, solenoid valves, etc. The various “Valve Automation Centers“ have test benches for pressure testing of valves depending on the ERIKS company for testing of sizes up to DN1200/48“ and pressures up to 1,200 bar. The valves are tested according to the applicable standards like API 598 and EN 12266.

Customer-specific test protocols can be provided.

Matching sensor series

Accessories for econ® actuators

Filler plate

F25

Puck extender

F31, F31K, F31K2

Selection of Pucks for Valve Position Sensors For detecting the open/closed position of valves, every sensor needs a sensor target as the activating element.

The newest puck highlight is a beacon with highly visible colors.

Mounting pattern/ actuator size

Matching sensor series

BT65A

30 mm x 80 mm

F31, F31K, F31K2

BT115A

30 mm x 130 mm

F31, F31K, F31K2

BT65-F31K2-RG-EN

30 mm x 80 mm

F31K2

Type code of puck

8

Valve Position Detection under Harsh Environmental Conditions The F31K2 Series is designed for uncompromised use in outdoor areas. It combines flexibility with robustness and great performance under extreme conditions. The IP66, IP67 and IP69K degree of protection cover a wide variety of applications.

Your Benefits at a Glance F31K2 with highly visible beacon

Temperature-resistant

▪▪

Designed for outdoor use thanks to high UV protection, elevated temperature and salt-water resistance

▪▪

Ruggedized modular housing

▪▪

Direct mounting onto standard actuators, no adjustment needed

▪▪

Optional beacon in weatherproof housing for clear valve position indication

UV-resistant

Waterproof

Sensor Selection Sensor type code

Solenoid connection

System connection

Electrical connection

NBN3-F31K2M-E8-B13-S

Yes

Terminal compartment

10 - 30 VDC, 3-wire

NBN3-F31K2M-Z8L-B13-S

Yes

Terminal compartment

6 - 60 VDC, 2-wire

Versions for hazardous areas in preparation.

9

Your automation, our passion.

Process interfaces Intrinsically safe barriers  Signal conditioners  Fieldbus infrastructure  Remote I/O systems  HART interface solutions  Wireless solutions  Level measurement  Purge and pressurization systems  Industrial monitors and HMI solutions  Explosion protection equipment  Solutions with process interfaces www.eriks.com 

Industrial sensors Proximity sensors  Photoelectric sensors  Industrial vision  Ultrasonic sensors  Rotary encoders  Positioning systems  Inclination and acceleration sensors  AS-Interface  Identification systems  Logic control units 

www.eriks.com

www.pepperl-fuchs.com Subject to modifications · © Pepperl+Fuchs Printed in Germany · 09/14 00