Action impact sockets

Action

2009 - 2010

Impact sockets for optimal performance and safety

Impact Sockets and Accessories Normal / Long Magnetic / Torx® Hex Head / 12-Point Surface Drive / Thin wall Universal Joints Sleeve Drive Impact Socket Sets Torque / Adapters Extension Bars

Impact sockets

Impact socket sets Impact sockets

Reduced Vibration!

Sleeve Drive

Sleeve Drive

Special sockets for oilfilter, stationary spindel and for wheel nuts 02 ACTION IMPACT SOCKETS

Contents

About Action

05

1/4"

Normal / long size Magnetic Surface Drive / Torx® Universal Joints

06 06 07 08

3/8"

Normal/long size Magnetic / 12-point L = 150 / 200 / 250 Surface Drive / Torx® Thin wall Universal Joints Hex Head Triple Square Bit

08 09 10 10 - 11 11 - 12 12 13 13

1/2"

Normal / long size Magnetic 12-point L = 150 / 200 / 250 Surface Drive / Hex Head Torx® Thin wall Universal Joints Hex Head Triple Square Bit

14 / 15 15 15 - 16 16 - 17 17 18 19 20 - 21 20 20

3/4"

Normal / long size 12-point Thin wall Hex Head / Torx® 4-point / 8-point

22 - 23 23 - 24 24 25 25

1"

Normal / long size 12-point Thin wall / Extra long Hex Head 4-point / 8-point

26 - 27 27- 28 29 29 29

1½"

Normal / long size Hex Head

30 30

2½"

Normal size

31

5#

#5 Spline drive (6-point)

31

Quickchange

Page

Various

Extension bars Universal joints Adapters Quickchange adapters Impact bit holders

32 32 33 33 33

Sleeve drive

3/8" - Normal / long size 34 3/8" - Magnetic / Torx® 34 - 35 3/8" - Hex Head 35 1/2" - Normal / long size 36 1/2" - Magnetic / Torx® 36 - 37 1/2" - Hex Head 37 3/4" - Normal size 38 3/4" - Hex Head / Torx® 38 Extension bars / Quickchange adapters 38

Impact socket sets Specials: sleeve drive socket and octagonal

Torque sockets

39 - 40 41

Impact sockets

➊

➋

➌

➍

➎

➏

04 ACTION IMPACT SOCKETS

Action If you work with impact wrenches we advise you to use the right impact socket with your specific tool in order to achieve the best result and the highest safety during the job. Also extension bars, Adapters and universal joints are available.

➊

➋

➌

Surface Drive Sockets are used in places where fast assembling is required. The easy and fast fitting of the socket on the bolt makes it possible to put the socket on the bolt with a running tool and to make the joint.

Sleeve Drive Sockets have been developed

by Action at the request of Yokota to improve the quality of a joint tightening with impulse wrenches. Sleeve Drive Sockets minimize play be­t ween socket and tool thus reducing “wobble”­and stabilizing the torque setting.

The use of Sleeve Drive Sockets is not only of benefit to the actual joint but also reduces vibration to the tool and operator, also reducing noise levels and tool wear.

All Action impact sockets are manufactured according DIN 3121 and DIN 3129. Universal joints and thin wall sockets­are supplied without­warranty.

Worn sockets cause loss of power and wear to the square drive of the tool increases vibration to the operator. Replace your worn sockets in time.

➍

Caution! Always wear safety goggles when using impact equipment. Do not hold the socket­while in use.

➎

➏

ACTION IMPACT SOCKETS 05

Impact sockets 1/4" 1/4" Impact sockets - normal

1/4"

Type

A/F Drawing mm/inch

Metrical DO0014-0-004 4 DO0014-0-0045 4,5 DO0014-0-005 5 DO0014-0-0055 5,5 DO0014-0-006 6 DO0014-0-007 7 DO0014-0-008 8 DO0014-0-009 9 DO0014-0-010 10 DO0014-0-011 11 DO0014-0-012 12 DO0014-0-013 13 DO0014-0-014 14 DO0014-0-015 15 Inch DO0014-0-3/16 3/16" DO0014-0-1/4 1/4" DO0014-0-5/16 5/16" DO0014-0-3/8 3/8" DO0014-0-7/16 7/16" DO0014-0-1/2 1/2"

➊

1/4" Magnetic Impact sockets - normal

D1 mm

D2 mm

L mm

L2 mm

A A A A A A A A C C C C C C

7,6 8,2 8,8 9,5 10 11,3 12,5 13,8 15 16,3 17 18,8 20 21

13 13 13 13 13 13 13 13 13 13 13 13 13 13

23 23 23 23 23 23 23 23 23 23 23 23 23 23

4 5 5 5 6 6 7 7 7 8 8 8 8 8

A A A C C C

8,5 10,3 12,5 15 16,3 18,8

13 13 13 13 13 13

23 23 23 23 23 23

5 6 7 7 8 8

1/4" Magnetic Impact sockets - long Type

Metrical DO0014-1-045 DO0014-1-004 DO0014-1-005 DO0014-1-006 DO0014-1-007 DO0014-1-008 DO0014-1-009 DO0014-1-010 DO0014-1-011 DO0014-1-012 DO0014-1-013 DO0014-1-014 DO0014-1-015

➋

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

4½ 4 5 6 7 8 9 10 11 12 13 14 15

C C C C C C C C C C C C C

8,2 8,2 8,8 10 11,3 12,5 13,8 15 16,3 17 18,8 20 21

13 13 13 13 13 13 13 13 13 13 13 13 13

50 50 50 50 50 50 50 50 50 50 50 50 50

6 4 6 7 7 9 9 9 9 9 9 9 9

A

06 ACTION IMPACT SOCKETS

B

C

Type

Metrical DO6050P050 DO6050P055 DO6050P060 DO6050P070 DO6050P080 DO6050P090 DO6050P100 DO6050P110 DO6050P120 DO6050P130 DO6050P140 DO6050P150

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

5 5,5 6 7 8 9 10 11 12 13 14 15

A A A A A C C C C C C C

8,8 9,5 10 11,3 12,5 13,8 15 16,3 17 18,8 20 21

13 13 13 13 13 13 13 13 13 13 13 13

23 23 23 23 23 23 23 23 23 23 23 23

3 3 3 3 3 4 4 5 5 5 6 6

L mm

L2 mm

1/4" Magnetic Impact sockets - long* Type

➌

Drawing

D1 mm

Metrical DO6050R050

5

A

8,8

13

50

3

DO6050R055

5,5

A

9,5

13

50

3

DO6050R060 DO6050R070 DO6050R080 DO6050R090 DO6050R100 DO6050R110 DO6050R120 DO6050R130 DO6050R140 DO6050R150

6 7 8 9 10 11 12 13 14 15

A A A C C C C C C C

10 11,3 12,5 13,8 15 16,3 17 18,8 20 21

13 13 13 13 13 13 13 13 13 13

50 50 50 50 50 50 50 50 50 50

3 3 3 4 4 5 5 5 6 6

F

➋

➍

A/F mm

* With spring loaded sliding magnet.

D2 mm

➊

➌

➍

1/4" Torx® socket

1/4" Surface Drive Impact sockets - normal ➊ Type

➊

➋

Metrisch DO63405040 DO63405045 DO63405050 DO63405055 DO63405060 DO63405070 DO63405080 DO63405090 DO63405100 DO63405110 DO63405120 DO63405130 DO63405140 DO63405150

Drawing

D1 mm

D2 mm

L mm

L2 mm

4 4,5 5 5,5 6 7 8 9 10 11 12 13 14 15

A A A A A A A C C C C C C C

7,6 8,2 8,8 9,5 10 11,3 12,5 13,8 15 16,3 17 18,8 20 21

13 13 13 13 13 13 13 13 13 13 13 13 13 13

23 23 23 23 23 23 23 23 23 23 23 23 23 23

4 5 5 5 6 6 7 7 7 8 8 8 8 8

➌

➍

➎

➏

Metrical DO63407040 DO63407045 DO63407050 DO63407055 DO63407060 DO63407070 DO63407080 DO63407090 DO63407100 DO63407110 DO63407120 DO63407130 DO63407140 DO63407150

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

4 4,5 5 5,5 6 7 8 9 10 11 12 13 14 15

A A A A A A A C C C C C C C

7,6 8,2 8,8 9,5 10 11,3 12,5 13,8 15 16,3 17 18,8 20 21

13 13 13 13 13 13 13 13 13 13 13 13 13 13

50 50 50 50 50 50 50 50 50 50 50 50 50 50

4 6 6 6 7 7 9 9 9 9 9 9 9 9

1/4" Torx® Impact sockets - external Type

Metrical DO63300004 DO63300005 DO63300006 DO63300007 DO63300008 DO63300010 DO63300011 DO63300012

➋

➌

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

E4 E5 E6 E7 E8 E10 E11 E12

A A A A A A B B

7,2 8 9 9,5 10 12,5 13 14,5

13 13 13 13 13 13 13 14,5

25 25 25 25 25 25 25 25

4 4,5 5 6 6 7,5 8 8,5

Type

Metrical DO63305004 DO63305005 DO63305006 DO63305007 DO63305008 DO63305010 DO63305011 DO63305012

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

E4 E5 E6 E7 E8 E10 E11 E12

A A A A A A A A

6,5 7,5 8,5 9 9,8 12 12,7 14

13 13 13 13 13 13 13 14,5

25 25 25 25 25 25 25 25

4 4,5 5 6 6 6,5 8 8,5

Thin wall sockets are not covered by the Action warranty.

1/4" Torx® Impact sockets - internal ➎ Type

Metrical DO64701005 DO64701006 DO64701007 DO64701008 DO64701009 DO64701010 DO64701015 DO64701020 DO64701025 DO64701027 DO64701030

A/F mm

Drawing

D2 mm

L1 mm

L mm

T5 T6 T7 T8 T9 T10 T15 T20 T25 T27 T30

F F F F F F F F F F F

13 13 13 13 13 13 13 13 13 13 13

2,0 2,0 2,0 2,0 2,0 2,8 2,8 2,8 3,0 3,0 3,8

35 35 35 35 35 35 35 35 35 35 35

1/4" Torx® Tamper Resistant Impact sockets - internal ➏ Type

Metrical DO64706008 DO64706009 DO64706010 DO64706015 DO64706020 DO64706025 DO64706027 DO64706030

A/F mm

Drawing

D2 mm

L1 mm

L mm

T5 T6 T7 T8 T9 T10 T15 T20

F F F F F F F F

13 13 13 13 13 13 13 13

2,0 2,0 2,0 2,0 2,0 2,8 2,8 2,8

35 35 35 35 35 35 35 35

Torx® is a trademark of Textron.

1/4" Pin and Ring DO1014-0-000

1/4"

ACTION IMPACT SOCKETS 07

1/4"

Type

1/4" Torx® Impact sockets, thin wall - external. ➍

A/F mm

1/4" Surface Drive Impact sockets - long

Surface Drive-socket

Impact sockets 1/4" + 3/8" 1/4" Universal joint sockets - normal Type

Metrical DO62500050 DO62500055 DO62500060 DO62500070 DO62500080 DO62500090 DO62500100 DO62500110 DO62500120 DO62500130 DO62500140 DO62500150

3/8"

Metrical DO1038-0-006 DO1038-0-007 DO1038-0-008 DO1038-0-009 DO1038-0-010 DO1038-0-011 DO1038-0-012 DO1038-0-013 DO1038-0-014 DO1038-0-015 DO1038-0-016 DO1038-0-017 DO1038-0-018 DO1038-0-019 DO1038-0-020 DO1038-0-021 DO1038-0-022 DO1038-0-023 DO1038-0-024

A

3/8" Impact sockets - normal

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

5 5,5 6 7 8 9 10 11 12 13 14 15

E E E E E E E E E E E E

8,8 9,5 10 11,5 12,5 14 15 16,5 16,8 18,8 19,8 20,8

15 15 15 15 15 15 15 15 16 16 16 16

43 43 43 43 43 43 43 43 48 48 48 48

5 6 6 8 8 8 8 8 8 8 8 8

3/8" Impact sockets - normal Type

➊

A/F mm

Drawing

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

A A A A A A B A A B C C C C C C C C C

B

08 ACTION IMPACT SOCKETS

Type

A/F mm

Inch DO1038-0-5/16 5/16" DO1038-0-3/8 3/8" DO1038-0-7/16 7/16" DO1038-0-1/2 1/2" DO1038-0-9/16 9/16" DO1038-0-5/8 5/8" DO1038-0-11/16 11/16" DO1038-0-3/4 3/4" DO1038-0-13/16 13/16" DO1038-0-7/8 7/8" DO1038-0-15/16 15/16"

Drawing

D1 mm

D2 mm

L mm

L2 mm

A A A B B B B B B B B

12,5 14,5 17 19 20 24 24 26 28 30 34

19 19 19 19 20 24 24 26 28 30 34

30 30 30 30 30 30 30 30 30 30 30

8 8 9 9 9 11 11 11 13 13 13

3/8" Impact sockets - long

➋

Type

D1 mm

D2 mm

L mm

L2 mm

11 12,5 14 15 16 17,5 19 20 21 22 24 25 26 27,5 28 30 32 33 34

19 19 19 19 19 19 19 22 22 22 22 22 22 22 22 22 23 23 23

30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

4 8 8 8 8 9 9 9 9 11 11 11 11 11 12 13 13 13 13

C

Metrical DO1038-1-007 DO1038-1-008 DO1038-1-009 DO1038-1-010 DO1038-1-011 DO1038-1-012 DO1038-1-013 DO1038-1-014 DO1038-1-015 DO1038-1-016 DO1038-1-017 DO1038-1-018 DO1038-1-019 DO1038-1-020 DO1038-1-021 DO1038-1-022 DO1038-1-024

E

➌

➊

➋

➍

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24

A A A A A B A A B C C C C C C C C

12,5 13,8 15 16 17,5 19 20 21 22 24 25 26 27,5 28 30 32 34

19 19 19 19 19 19 22 22 22 22 22 22 22 22 22 23 23

65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65

12 12 12 12 25 25 25 25 25 25 25 25 25 25 25 25 25

➌

➍

3/8" 3/8" Magnetic Impact sockets - normal Type

➊

➋

Metrical DO6051P006 DO6051P007 DO6051P008 DO6051P009 DO6051P010 DO6051P011 DO6051P012 DO6051P013 DO6051P014 DO6051P015 DO6051P016 DO6051P017 DO6051P018 DO6051P019

Drawing

D1 mm

D2 mm

L mm

L2 mm

6 7 8 9 10 11 12 13 14 15 16 17 18 19

A A A A A A B A A B C C C C

11,5 12,5 14 15 16,5 17,5 19 20 21,5 22 24 25 26 27,5

19 19 19 19 19 19 19 22 22 22 22 22 22 22

30 30 30 30 30 30 30 30 30 30 30 30 30 30

3 3 3 4 4 5 5 5 6 6 6 6 7 7

➍

Metrical DO6051R006 DO6051R007 DO6051R008 DO6051R009 DO6051R010 DO6051R011 DO6051R012 DO6051R013 DO6051R014 DO6051R015 DO6051R016 DO6051R017 DO6051R018 DO6051R019

➋

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

6 7 8 9 10 11 12 13 14 15 16 17 18 19

A A A A A A B A A B C C C C

11,5 12,5 14 15 16,5 17,5 19 20 21,5 22 24 25 26 27,5

19 19 19 19 19 19 19 22 22 22 22 22 22 22

55 55 55 55 55 55 55 55 55 55 55 55 55 55

3 3 3 4 4 5 5 5 6 6 6 6 7 7

* With spring loaded sliding magnet.

Type

Metrical DO65815006 DO65815007 DO65815008 DO65815009 DO65815010 DO65815011 DO65815012 DO65815013 DO65815014 DO65815015 DO65815016 DO65815017 DO65815018 DO65815019 DO65815020 DO65815021 DO65815022 DO65815023 DO65815024 DO65815025 DO65815026

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

A A A A A A A A A B C C C C C C C C C C C

11 12 13 15 16 17,5 18,5 20 21 22 24 25 26 27 28 30 31 32 34 35 36

19 19 19 19 19 19 19 22 22 22 22 22 22 22 22 22 23 23 23 23 23

30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

5 8 8 8 8 9 9 10 11 12 12 12 13 13 13 14 15 15 16 16 16

3/8" Impact sockets - 12-point - long Type

Metrical DO65817006 DO65817007 DO65817008 DO65817009 DO65817010 DO65817011 DO65817012 DO65817013 DO65817014 DO65817015 DO65817016 DO65817017 DO65817018 DO65817019 DO65817020 DO65817021 DO65817022 DO65817023 DO65817024 DO65817025 DO65817026

➌

➍

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

A A A A A A A A A B C C C C C C C C C C C

11 12 13 15 16 17,5 18,5 20 21 22 24 25 26 27 28 30 31 32 34 35 36

19 19 19 19 19 19 19 22 22 22 22 22 22 22 22 22 23 23 23 23 23

63 63 63 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65

5 12 12 12 22 22 22 22 22 22 24 24 24 24 24 24 24 24 24 24 24

ACTION IMPACT SOCKETS 09

3/8"

➌

3/8" Impact sockets - 12-point - normal

A/F mm

3/8" Magnetic Impact sockets - long* Type

➊

Impact sockets 3/8" 3/8" Impact sockets - L = 150 Type

Metrical DO60715006 DO60715008 DO60715010 DO60715012 DO60715013 DO60715014 DO60715015 DO60715016 DO60715017

3/8"

Metrical DO60716006 DO60716008 DO60716010 DO60716012 DO60716013 DO60716014 DO60716015 DO60716016 DO60716017

Drawing

D1 mm

D2 mm

L mm

L2 mm

6 8 10 12 13 14 15 16 17

G G G G G G G G G

1 12,5 15,5 18 19,5 20,5 21 22,5 24

22 22 22 22 22 22 22 22 22

150 150 150 150 150 150 150 150 150

4 8 8 9 9 9 11 11 11

D1 mm

D2 mm

L mm

L2 mm

1 12,5 15,5 18 19,5 20,5 21 22,5 24

22 22 22 22 22 22 22 22 22

200 200 200 200 200 200 200 200 200

4 8 8 9 9 9 11 11 11

A/F mm

Drawing

6 8 10 12 13 14 15 16 17

G G G G G G G G G

3/8" Impact sockets - L = 250 Type

A/F mm

Metrical DO60717006 DO60717008 DO60717010 DO60717012 DO60717013 DO60717014 DO60717015 DO60717016 DO60717017

3/8" Surface Drive Impact sockets - normal

A/F mm

3/8" Impact sockets - L = 200 Type

➊

6 8 10 12 13 14 15 16 17

Drawing

10 ACTION IMPACT SOCKETS

1 12,5 15,5 18 19,5 20,5 21 22,5 24

B

Metrical DO63415008 DO63415009 DO63415010 DO63415011 DO63415012 DO63415013 DO63415014 DO63415015 DO63415016 DO63415017 DO63415018 DO63415019

A/F Drawing mm/inch

D1 mm

D2 mm

L mm

L2 mm

8 9 10 11 12 13 14 15 16 17 18 19

A A A A B A B B C C C C

13,8 15 16 17,5 19 20 22 22 24 25 26 28

19 19 19 19 19 22 22 22 22 22 22 22

32 32 32 32 32 32 32 32 32 32 32 32

8 8 8 9 9 9 9 11 11 11 11 11

1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4"

A A A A A B C C C

11,5 13,8 15,5 17,5 20 22 24 26 28

19 19 19 19 22 22 22 22 22

32 32 32 32 32 32 32 32 32

4 8 8 9 9 11 11 11 11

DO63410008 DO63410010 DO63410012 DO63410014 DO63410016 DO63410018 DO63410020 DO63410022 DO63410024

Type D2 mm

L mm

22 22 22 22 22 22 22 22 22

250 250 250 250 250 250 250 250 250

C

L2 mm

4 8 8 9 9 9 11 11 11

➊

➋

Inch

3/8" Torx® Impact sockets - external

➌

D1 mm

G G G G G G G G G

A

➋

Type

➍

Metrical DO63310005 DO63310006 DO63310007 DO63310008 DO63310010 DO63310011 DO63310012 DO63310014 DO63310016

➌

➎

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

E5 E6 E7 E8 E10 E11 E12 E14 E16

A A A A A A A A B

9 10 10 10,5 12,5 14,5 15 17,5 19

19 19 19 19 19 19 19 19 19

32 32 32 32 32 32 32 32 32

4,5 5 6 6 7,5 8 8,5 10 11

➍

Torx® is a trademark of Textron.

G

➎

3/8" 3/8" Surface Drive Impact sockets - long Type

➊

➋

➊

3/8" Torx® Impact sockets - internal

A/F mm/inch

Drawing

D1 mm

D2 mm

L mm

L2 mm

8 9 10 11 12 13 14 15 16 17 18 19

A A A A B A B B C C C C

13,8 15 16 17,5 19 20 22 22 24 25 26 28

19 19 19 19 19 22 22 22 22 22 22 22

80 80 80 80 80 80 80 80 80 80 80 80

12 12 12 25 25 25 25 25 25 25 25 25

Metrical DO63417008 DO63417009 DO63417010 DO63417011 DO63417012 DO63417013 DO63417014 DO63417015 DO63417016 DO63417017 DO63417018 DO63417019

Inch

➍

5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4"

A A A A B C C C

13,8 15,5 17,5 20 22 24 26 28

19 19 19 22 22 22 22 22

80 80 80 80 80 80 80 80

12 12 25 25 25 25 25 25

3/8" Torx® Impact sockets, thin wall - external

➋

Type

Metrical DO63315005 DO63315006 DO63315007 DO63315008 DO63315010 DO63315011 DO63315012 DO63315014 DO63315016

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

E5 E6 E7 E8 E10 E11 E12 E14 E16

A A A A A A A A A

8 9 9,3 10 12,3 13 14 16,5 18,4

19 19 19 19 19 19 19 19 19

32 32 32 32 32 32 32 32 32

4,5 5 6 6 7,5 8 8,5 10 11

Metrical DO64711009 DO64711010 DO64711015 DO64711020 DO64711025 DO64711027 DO64711030 DO64711040 DO64711045 DO64711047 DO64711050

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

T9 T10 T15 T20 T25 T27 T30 T40 T45 T47 T50

F F F F F F F F F F F

-

19 19 19 19 19 19 19 19 19 19 19

2,8 2,8 2,8 3,0 3,0 3,8 3,8 4,3 5,0 5,0 5,5

50 50 50 50 50 50 50 50 50 50 50

3/8" Torx® Tamper resistant Impact sockets - internal ➍ Type

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

T20 T25 T27 T30 T40 T45 T47 T50 T55

F F F F F F F F F

-

19 19 19 19 19 19 19 19 19

3,0 3,0 3,8 3,8 4,3 5,0 5,0 5,5 5,5

50 50 50 50 50 50 50 50 50

Metrical DO64716020 DO64716025 DO64716027 DO64716030 DO64716040 DO64716045 DO64716047 DO64716050 DO64716055

Thin wall sockets are not covered by the Action warranty.

3/8" Pin and Ring DO1038-0-000

3/8"

F

ACTION IMPACT SOCKETS 11

3/8"

➌

DO63412010 DO63412012 DO63412014 DO63412016 DO63412018 DO63412020 DO63412022 DO63412024

Type

➌

Impact sockets 3/8" 3/8" Impact sockets, thin wall - normal Type

Metrical DO61110006 DO61110007 DO61110008 DO61110009 DO61110010 DO61110011 DO61110012 DO61110013 DO61110014

➊

3/8" Universal Joint sockets - normal

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

6 7 8 9 10 11 12 13 14

C C C C C C C B B

10,5 11,5 12,5 14 15 17 17,5 19 20

19 19 19 19 19 19 19 19 20

30 30 30 30 30 30 30 30 30

4 8 8 8 8 9 9 9 9

Thin wall sockets are not covered by the Action warranty.

3/8" Impact sockets, thin wall - long

3/8"

Type

Metrical DO61112007 DO61112008 DO61112009 DO61112010 DO61112011 DO61112012 DO61112013 DO61112014 DO61112015 DO61112016 DO61112017 DO61112018 DO61112019 DO61112020 DO61112021 DO61112022

➋

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

A A A A A A B B A C C C C C C C

11,5 12,5 14 15 17 17,5 19 20 21 22,5 24 25 26 27 28 30

19 19 19 19 19 19 19 20 22 22 22 22 22 22 22 23

65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65

12 12 12 25 25 25 25 25 25 25 25 25 25 25 25 25

Thin wall sockets are not covered by the Action warranty. .

Type

Metrical DO1038-2-009 DO1038-2-010 DO1038-2-011 DO1038-2-012 DO1038-2-013 DO1038-2-014 DO1038-2-015 DO1038-2-016 DO1038-2-017 DO1038-2-018 DO1038-2-019 DO1038-2-020 DO1038-2-021 DO1038-2-022

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

9 10 11 12 13 14 15 16 17 18 19 20 21 22

E E E E E E E E E E E E E E

15 15 17 19 19 21 22 23 25 25 27 30 30 32

24 24 24 24 24 24 24 24 24 24 24 24 24 24

53 53 53 53 53 53 53 53 53 53 53 53 53 53

9 9 9 12 13 13 13 13 13 13 13 13 13 13

3/8" Universal Joint sockets - long Type

Metrical DO1038-4-009 DO1038-4-010 DO1038-4-011 DO1038-4-012 DO1038-4-013 DO1038-4-014 DO1038-4-015 DO1038-4-016 DO1038-4-017 DO1038-4-018 DO1038-4-019 DO1038-4-020 DO1038-4-021 DO1038-4-022

➌

12 ACTION IMPACT SOCKETS

B

C

E

➋

➍

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

9 10 11 12 13 14 15 16 17 18 19 20 21 22

E E E E E E E E E E E E E E

15 15 17 19 19 21 22 23 25 25 27 30 30 32

24 24 24 24 24 24 24 24 24 24 24 24 24

78 78 80 80 80 80 80 80 80 80 80 80 80 80

20 20 20 20 20 20 20 20 20 20 25 25 25 25

Universal joint sockets are secured by means of a ring.

A

➊

➌

➍

3/8" Universal Joints socket

3/8" Impact sockets hex head Type

➊

➋

Metrical DO696203A DO696204A DO696205A DO696206A DO696207A DO696208A DO696209A DO696210A DO696211A DO696212A DO696213A DO696214A DO696215A DO696216A

➊

Drawing

D2 mm

L1 mm

L mm

3 4 5 6 7 8 9 10 11 12 13 14 15 16

F F F F F F F F F F F F F F

19 19 19 19 19 19 19 19 19 19 19 19 19 19

16 16 16 16 16 16 16 16 16 16 16 16 16 16

50 50 50 50 50 50 50 50 50 50 50 50 50 50

➌

➍

Metrical DO65216005 DO65216006 DO65216008 DO65216010 DO65216012 DO65216014 DO65216016

Drawing

5 6 8 10 12 14 16

F F F F F F F

Metrical DO65217005 DO65217006 DO65217008 DO65217010 DO65217012 DO65217014 DO65217016

Metrical DO65110005 DO65110006 DO65110007 DO65110008 DO65110009 DO65110010 DO65110011 DO65110012 DO65110013 DO65110014 DO65110015 DO65110016

D2 mm

L mm

L1 mm

19 19 19 19 19 19 19

50 50 50 50 50 50 50

7 7 9 9 11 11 13

➌

A/F mm

Drawing

D2 mm

L mm

L1 mm

5 6 8 10 12 14 16

F F F F F F F

19 19 19 19 19 19 19

100 100 100 100 100 100 100

7 7 9 9 11 11 13

A/F mm

Drawing

D2 mm

L mm

L2 mm

5 6 7 8 9 10 11 12 13 14 15 16

E E E E E E E E E E E E

24 24 24 24 24 24 24 24 24 24 24 24

60 60 60 60 60 60 60 60 60 60 60 60

11 11 15 15 15 15 15 15 15 15 15 15

➎

3/8" Universal Joint sockets for internal Torx® Type

➋

3/8" Impact sockets Triple Square Bit - long Type

➎

A/F mm

Type

➍

Metrical DO64910020 DO64910025 DO64910027 DO64910030 DO64910040 DO64910045 DO64910047 DO64910050 DO64910055

A/F mm

Drawing

D2 mm

L mm

T20 T25 T27 T30 T40 T45 T47 T50 T55

E E E E E E E E E

24 24 24 24 24 24 24 24 24

60 60 60 60 60 60 60 60 60

3/8" Universal Joint sockets for external Torx® Type

Metrical DO68710005 DO68710006 DO68710007 DO68710008 DO68710010 DO68710012 DO68710014 DO68710016

3/8"

Type

3/8" Universal Joint sockets hex head

A/F mm

3/8" Impact sockets Triple Square Bit

Socket, thin wall

➏

A/F mm

Drawing

D2 mm

L mm

L2 mm

E5 E6 E7 E8 E10 E12 E14 E16

E E E E E E E E

24 24 24 24 24 24 24 24

50 50 50 50 50 50 50 50

4,5 5 6 6 7,5 8,5 10 11

➏ F

ACTION IMPACT SOCKETS 13

Impact sockets 1/2" 1/2" Impact sockets - normal

1/2"

Type

Metrical DO2012-0-008 DO2012-0-009 DO2012-0-010 DO2012-0-011 DO2012-0-012 DO2012-0-013 DO2012-0-014 DO2012-0-015 DO2012-0-016 DO2012-0-017 DO2012-0-018 DO2012-0-019 DO2012-0-020 DO2012-0-021 DO2012-0-022 DO2012-0-023 DO2012-0-024 DO2012-0-025 DO2012-0-026 DO2012-0-027 DO2012-0-028 DO2012-0-029 DO2012-0-030 DO2012-0-032 DO2012-0-034 DO2012-0-036 DO2012-0-038 DO2012-0-041 DO2012-0-046 Inch DO2012-0-3/8 DO2012-0-7/16 DO2012-0-1/2 DO2012-0-9/16 DO2012-0-5/8 DO2012-0-11/16 DO2012-0-3/4 DO2012-0-13/16 DO2012-0-7/8 DO2012-0-15/16 DO2012-0-1 DO2012-0-1 1/16 DO2012-0-1 1/8 DO2012-0-1 3/16 DO2012-0-1 1/4

A/F Drawing mm/inch

➊

1/2" Magnetic Impact sockets - normal

D1 mm

D2 mm

L mm

L2 mm

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 34 36 38 41 46

A A A A A A A A A A A A B B C C C C C C C C C C C C C C C

14,5 16 17 19 20 21 22 24 25 26 27,5 29 30 32 32 32,5 35 36 37,5 39 40 41 42,5 44 45 48 53 58 65

24 24 24 24 24 24 24 24 26 26 28 30 30 32 32 34 36 36 38 38 38 38 38 38 38 38 38 44 44

38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 45 45 45 50 50 50 50 50 50 50 50 60 60

9 12 12 12 12 12 12 12 12 13 13 13 13 13 13 13 20 20 22 22 22 22 22 28 28 28 24 27 30

3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 1 1/16" 1 1/8" 1 3/16" 1 1/4"

A A A A B B B B B B B B B C C

16 18 20 22 25 26 28 30 32 34 36 38 40 42 44

22 22 22 24 25 26 28 30 32 34 36 38 38 38 38

38 38 38 38 38 38 38 38 38 38 38 40 40 40 40

12 12 12 12 12 13 13 13 13 13 14 16 16 16 18

14 ACTION IMPACT SOCKETS

Type

Metrical DO6052P008 DO6052P009 DO6052P010 DO6052P011 DO6052P012 DO6052P013 DO6052P014 DO6052P015 DO6052P016 DO6052P017 DO6052P018 DO6052P019 DO6052P020 DO6052P021 DO6052P022 DO6052P024

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24

A A A A A A A A A A A A B C C C

15 16 17,5 18,5 20 21 22,5 23,7 25 26,5 27,5 29 30 31 32,5 35

25 25 25 25 25 25 25 30 30 30 30 30 30 30 30 30

38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 45

3 4 4 5 5 5 6 6 6 6 7 7 7 8 8 10

1/2" Impact sockets - long Type

Metrical DO2012-1-008 DO2012-1-009 DO2012-1-010 DO2012-1-011 DO2012-1-012 DO2012-1-013 DO2012-1-014 DO2012-1-015 DO2012-1-016 DO2012-1-017 DO2012-1-018 DO2012-1-019 DO2012-1-020 DO2012-1-021 DO2012-1-022 DO2012-1-023 DO2012-1-024 DO2012-1-025 DO2012-1-026 DO2012-1-027 DO2012-1-028 DO2012-1-029 DO2012-1-030 DO2012-1-031 DO2012-1-032

➋

➊

➋

➌

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

A A A A A A A A A A A A B B C C C C C C C C C C C

14,5 16 17 18 19,5 21 22 23,5 23,5 26 26 28 30,5 31 32,5 32,5 35 36 37,5 38 40 40 42 43 45

25 25 25 25 25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78

13 14 14 14 14 14 17 17 17 17 17 19 19 24 24 24 24 24 24 54 54 54 54 54 54

➌

1/2" Hex head socket

1/2" Impact sockets - long (continued) Type

➊

➋

A/F Drawing mm/inch

Metrical DO2012-1-033 DO2012-1-034 DO2012-1-035 DO2012-1-036

33 34 35 36

Inch DO2012-1-7/16 7/16" DO2012-1-1/2 1/2" DO2012-1-9/16 9/16" DO2012-1-5/8 5/8" DO2012-1-11/16 11/16" DO2012-1-3/4 3/4" DO2012-1-13/16 13/16" DO2012-1-7/8 7/8"

D1 mm

D2 mm

L mm

L2 mm

C C C C

45 45 47 49

30 30 30 30

78 78 78 78

54 54 54 54

A A A B B B B B

18 20 22 26 26 28 30 32

22 22 24 26 26 28 30 32

78 78 78 78 78 78 78 78

14 14 17 17 17 19 24 24

➊

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

Metrical DO6052R008 DO6052R009

8 9

A A

15 16

25 25

78 78

3 4

DO6052R010

10

A

17,5

25

78

4

DO6052R011 DO6052R012 DO6052R013 DO6052R014 DO6052R015 DO6052R016 DO6052R017 DO6052R018 DO6052R019 DO6052R020 DO6052R021 DO6052R022 DO6052R024

11 12 13 14 15 16 17 18 19 20 21 22 24

A A A A A A A A A B C C C

18,5 20 21 22,5 23,7 25 26,5 27,5 29 30 31 32,5 35

25 25 25 25 30 30 30 30 30 30 30 30 30

78 78 78 78 78 78 78 78 78 78 78 78 78

5 5 5 6 6 6 6 7 7 7 8 8 10

Type

Metrical DO63825008 DO63825009 DO63825010 DO63825011 DO63825012 DO63825013 DO63825014 DO63825015 DO63825016 DO63825017 DO63825018 DO63825019 DO63825020 DO63825021 DO63825022 DO63825023 DO63825024 DO63825025 DO63825026 DO63825027 DO63825028 DO63825029 DO63825030 DO63825032 DO63825033 DO63825036

➋

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 33 36

A A A A A A A B B B B B B B B B B B B B C C C C C C

15 15 17 18 19 20 22 24 24 26 26 28 30 30 32 32 34 36 36 38 40 40 42 44 45 48

24 24 24 24 24 24 24 24 26 26 28 30 30 32 32 34 36 36 38 38 38 38 38 38 38 38

38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 45 45 50 50 50 50 50 50 50 50

9 12 12 12 12 12 12 12 12 13 13 13 13 13 13 13 19 19 20 20 20 20 20 20 25 25

* With spring loaded sliding magnet.

A

B

C

ACTION IMPACT SOCKETS 15

1/2"

1/2" Magnetic Impact sockets - long* Type

1/2" Impact sockets - 12-point - normal

Impact sockets 1/2" 1/2" Impact sockets - 12-point - long

1/2"

Type

1/2" Impact sockets - 12-point - long (continued) ➊

➊

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

Metrical DO65827006 DO65827007 DO65827008 DO65827009 DO65827010 DO65827011 DO65827012 DO65827013 DO65827014 DO65827015 DO65827016 DO65827017 DO65827018 DO65827019 DO65827020 DO65827021 DO65827022 DO65827023 DO65827024 DO65827025 DO65827026 DO65827027 DO65827028 DO65827029 DO65827030 DO65827031 DO65827032 DO65827033 DO65827034 DO65827035 DO65827036

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

A A A A A A A A A A A A A A B C C C C C C C C C C C C C C C C

13 14 15 16 17,5 19 20 21 22,5 23,5 25 26,5 27,5 29 30 31 32,5 34 35 36 38 39 40 41 42,5 44 45 46,5 48 49,5 50,5

25 25 25 25 25 25 25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90

5 5 6 6 7 8 9 9 11 11 11 11 13 13 13 15 15 15 18 18 18 19 19 19 21 21 22 22 22 22 24

DO65827038

38

C

53

38

90

24

DO65827039 DO65827040 DO65827041 DO65827042 DO65827043 DO65827044 DO65827045 DO65827046 DO65827047

39 40 41 42 43 44 45 46 47

C C C C C C C C C

54,5 56 58 60 61 63 64 65 66,5

44 44 44 44 44 44 44 44 44

93 93 93 93 93 93 93 93 93

24 58 58 58 58 58 58 58 58

A

B

16 ACTION IMPACT SOCKETS

C

Type

Metrical DO65827048 DO65827049 DO65827050 DO65827051 DO65827052 DO65827053 DO65827054 DO65827055 DO65827056 DO65827057 DO65827058

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

48 49 50 51 52 53 54 55 56 57 58

C C C C C C C C C C C

68 69 70 71 72,5 74 75 76 77 78 79

44 44 52 52 52 52 52 52 52 52 52

93 93 93 93 93 93 93 93 93 93 93

58 58 58 58 58 58 58 58 58 58 58

1/2" Impact sockets - L = 150 Type

Metrical DO60725008 DO60725010 DO60725012 DO60725013 DO60725014 DO60725015 DO60725017 DO60725019 DO60725020 DO60725021

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

8 10 12 13 14 15 17 19 20 21

G G G G G G G G G G

15 17 19,5 20,5 22 23 25,5 28 30 30

25 25 25 25 25 25 25 25 25 25

150 150 150 150 150 150 150 150 150 150

10 12 12 12 12 12 13 13 13 3

1/2" Impact sockets - L = 200 Type

Metrical DO60726008 DO60726010 DO60726012 DO60726013 DO60726014 DO60726015 DO60726017 DO60726019 DO60726020 DO60726021

G

➋

➌

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

8 10 12 13 14 15 17 19 20 21

G G G G G G G G G G

15 17 19,5 20,5 22 23 25,5 28 30 30

25 25 25 25 25 25 25 25 25 25

200 200 200 200 200 200 200 200 200 200

10 12 12 12 12 12 13 13 13 13

➊

➋

➌

1/2" Hex head socket

1/2" Impact sockets - L = 250 Type

➊

➋

Metrical DO60727008 DO60727010 DO60727012 DO60727013 DO60727014 DO60727015 DO60727017 DO60727019 DO60727020 DO60727021

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

8 10 12 13 14 15 17 19 20 21

G G G G G G G G G G

15 17 19,5 20,5 22 23 25,5 28 30 30

25 25 25 25 25 25 25 25 25 25

250 250 250 250 250 250 250 250 250 250

10 12 12 12 12 12 13 13 13 13

Metrical DO63425010 DO63425011 DO63425012 DO63425013 DO63425014 DO63425015 DO63425016 DO63425017 DO63425018 DO63425019 DO63425020 DO63425021 DO63425022 DO63425023 DO63425024 DO63425026 DO63425027 DO63425029 DO63425030 DO63425032

A

➋

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 27 29 30 32

A A A A A A A A A A B B C C C C C C C C

17,5 18,7 20 21 22,5 23,7 25 26 27,5 28,7 30 30 32 32 35 38 38,7 40 42 44

25 25 25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

38 38 38 38 38 38 38 38 38 38 38 38 38 38 45 50 50 50 50 50

12 12 12 12 12 12 12 13 13 13 13 13 13 13 20 22 22 22 22 28

B

C

Type

Metrical DO696304A DO696305A DO696306A DO696307A DO696308A DO696309A DO696310A DO696311A

➌

A/F mm

Drawing

D2 mm

L mm

L2 mm

4 5 6 7 8 9 10 11

D D D D D D D D

25 25 25 25 25 25 25 25

75 75 75 75 75 75 75 75

20 20 20 20 25 25 25 25

DO696312A

12

D

25

75

25

DO696313A DO696314A DO696315A DO696316A DO696317A DO696319A

13 14 15 16 17 19

D D D D D D

25 25 25 25 25 25

75 75 75 75 75 75

25 25 25 25 25 25

1/2" Surface Drive Impact sockets - long Type

Metrical DO63427010 DO63427011 DO63427012 DO63427013 DO63427014 DO63427015 DO63427016 DO63427017 DO63427018 DO63427019 DO63427020 DO63427021 DO63427022 DO63427023 DO63427024 DO63427026 DO63427027 DO63427029 DO63427030 DO63427032

➍

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 27 29 30 32

A A A A A A A A A A B B C C C C C C C C

17,5 18,7 20 21 22,5 23,7 25 26 27,5 28,7 30 30 32 32 35 38 38,7 40 42 44

25 25 25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

83 83 83 83 83 83 83 83 83 83 83 83 90 90 90 90 90 90 90 90

14 14 14 14 17 17 17 17 17 19 19 24 60 60 60 60 60 60 60 60

D

ACTION IMPACT SOCKETS 17

1/2"

➍

1/2" Impact sockets hex head

1/2" Surface Drive Impact sockets - normal Type

➌

➊

Impact sockets 1/2" 1/2" Torx® Impact sockets - external Type

Metrical DO63320010 DO63320011 DO63320012 DO63320014 DO63320016 DO63320018 DO63320020 DO63320022 DO63320024

➊

.1/2" Torx® Tamper resistant Impact sockets - int.

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

E10 E11 E12 E14 E16 E18 E20 E22 E24

A A A A A A A A A

15 15,5 16 18,5 20 22 25 26,5 28,5

25 25 25 25 25 25 30 30 30

38 38 38 38 38 38 38 45 45

7,5 8 8,5 10 11 12 13,5 18 18

1/2"

Metrical DO63325010 DO63325011 DO63325012 DO63325014 DO63325016 DO63325018 DO63325020 DO63325022 DO63325024

D2 mm

L1 mm

L mm

T20 T25 T27 T30 T40 T45 T47 T50 T55 T60 T70

F F F F F F F F F F F

25 25 25 25 25 25 25 25 25 25 25

2,8 3,0 3,0 3,8 3,8 4,3 5,0 5,0 5,5 8,0 9,4

55 55 55 55 55 55 55 55 55 55 55

➋

Drawing

D1 mm

D2 mm

L mm

L2 mm

1/2" Torx® Impact sockets - internal - long

E10 E11 E12 E14 E16 E18 E20 E22 E24

A A A A A A A A A

13 14 15 17 18,5 20,5 22,5 24,5 26,5

25 25 25 25 25 25 30 30 30

38 38 38 38 38 38 38 45 45

7,5 8 8,5 10 11 12 13,5 18 18

Thin wall sockets are not covered by the Action warranty.

1/2" Torx® Impact sockets - internal

Metrical DO64721020 DO64721025 DO64721027 DO64721030 DO64721040 DO64721045 DO64721047 DO64721050 DO64721055 DO64721060 DO64721070

Drawing

A/F mm

Type

Type

A/F mm

Metrical DO64726020 DO64726025 DO64726027 DO64726030 DO64726040 DO64726045 DO64726047 DO64726050 DO64726055 DO64726060 DO64726070

1/2" Torx® Impact sockets thin wall - external Type

Type

A/F mm

Drawing

T20 T25 T27 T30 T40 T45 T47 T50 T55 T60 T70

F F F F F F F F F F F

➌

D2 mm

L1 mm

L mm

25 25 25 25 25 25 25 25 25 25 25

2,8 3,0 3,0 3,8 3,8 4,3 5,0 5,0 5,5 8,0 9,4

55 55 55 55 55 55 55 55 55 55 55

Metrical DO64722020 DO64722025 DO64722027 DO64722030 DO64722040 DO64722045 DO64722047 DO64722050 DO64722055 DO64722060 DO64722070

18 ACTION IMPACT SOCKETS

➊

➋

➎

A/F mm

Drawing

D2 mm

L1 mm

L mm

T20 T25 T27 T30 T40 T45 T47 T50 T55 T60 T70

F F F F F F F F F F F

25 25 25 25 25 25 25 25 25 25 25

2,8 3,0 3,0 3,8 3,8 4,3 5,0 5,0 5,5 8,0 9,4

75 75 75 75 75 75 75 75 75 75 75

➌

➍

1/2" Torx® Tamper resistant Impact sockets - internal - long Type

Metrical DO64727020 DO64727025 DO64727027 DO64727030 DO64727040 DO64727045 DO64727047 DO64727050 DO64727055 DO64727060 DO64727070

➏

A/F mm

Drawing

D2 mm

L1 mm

L mm

T20 T25 T27 T30 T40 T45 T47 T50 T55 T60 T70

F F F F F F F F F F F

25 25 25 25 25 25 25 25 25 25 25

2,8 3,0 3,0 3,8 3,8 4,3 5,0 5,0 5,5 8,0 9,4

75 75 75 75 75 75 75 75 75 75 75

Torx® is a trademark of Textron.

F

➍

➎

➏

1/2" Hex head socket

1/2" Impact sockets thin wall - normal Type

➊

➋

1/2" Impact sockets thin wall - long

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

A A A A A A A A A B B B B B B B B

13 14,5 15,5 16,7 18 19,2 21 21,7 23 24 25 26 27,5 28 29,5 30,5 32

25 25 25 25 25 25 25 30 30 30 30 30 30 30 30 30 30

38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 45

6 6 7 8 9 9 11 11 11 11 13 13 13 15 15 15 18

Thin wall sockets are not covered by the Action warranty.

➌

1/2" Impact sockets thin wall - normal Type

Metrical DO6112B008 DO6112B009 DO6112B010 DO6112B011 DO6112B012 DO6112B013 DO6112B014 DO6112B015 DO6112B016 DO6112B017 DO6112B018 DO6112B019 DO6112B020 DO6112B021 DO6112B022 DO6112B023 DO6112B024

➊

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

A A A A A A A A A B B B B B B B B

14 14,5 15,5 16,7 18 19,2 21 21,7 23 24 25 26 27,5 28 29,5 30,5 32

22 22 22 22 22 24 24 24 24 24 25 26 27,5 28 29,5 30,5 32

38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 45

9 12 12 12 12 12 12 12 12 13 13 13 13 13 13 13 20

Type

Metrical DO61122008 DO61122009 DO61122010 DO61122011 DO61122012 DO61122013 DO61122014 DO61122015 DO61122016 DO61122017 DO61122018 DO61122019 DO61122020 DO61122021 DO61122022 DO61122023 DO61122024 DO61122025 DO61122026 DO61122027 DO61122028 DO61122029 DO61122030 DO61122031 DO61122032

➋

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

A A A A A A A A A B B B B B B B B B B B B C C C C

14 14,5 15,5 16,7 18 19,2 21 21,7 23 24 25 26 27,5 28 29,5 30,5 32 33 35 36 37,5 38,5 40 41 42

22 22 22 22 22 24 24 24 24 24 25 26 27,5 28 29,5 30,5 32 33 35 36 37,5 38 38 38 38

78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78

13 14 14 14 14 14 17 17 17 17 17 19 19 24 24 24 24 24 24 24 24 54 54 54 54

Thin wall sockets are not covered by the Action warranty.

1/2" Impact sockets thin wall, with plastic stop and sleeve - long ➌ Type

Metrical DO61126015 (white) DO61126017 (blue) DO61126019 (yellow) DO61126021 (red) DO61126022 (green)

A/F mm

Drawing

D1 mm

D2 mm

D3 mm

L mm

L2 mm

15 17 19 21 22

G G G G G

22 24 26 28 29,5

30 30 30 30 30

25 27 29 31 32,5

85 85 85 85 85

13 14 15 17 18

Thin wall sockets are not covered by the Action warranty.

Thin wall sockets are not covered by the Action warranty.

A

B

C

E

G ACTION IMPACT SOCKETS 19

1/2"

Metrical DO61120008 DO61120009 DO61120010 DO61120011 DO61120012 DO61120013 DO61120014 DO61120015 DO61120016 DO61120017 DO61120018 DO61120019 DO61120020 DO61120021 DO61120022 DO61120023 DO61120024

➊

Impact sockets 1/2" 1/2" Universal Joint sockets - normal

1/2"

Type

Metrical DO2012-2-010 DO2012-2-011 DO2012-2-012 DO2012-2-013 DO2012-2-014 DO2012-2-015 DO2012-2-016 DO2012-2-017 DO2012-2-018 DO2012-2-019 DO2012-2-020 DO2012-2-021 DO2012-2-022 DO2012-2-023 DO2012-2-024

Metrical DO2012-4-010 DO2012-4-011 DO2012-4-012 DO2012-4-013 DO2012-4-014 DO2012-4-015 DO2012-4-016 DO2012-4-017 DO2012-4-018 DO2012-4-019 DO2012-4-020 DO2012-4-021 DO2012-4-022 DO2012-4-023 DO2012-4-024

1/2" Impact sockets Triple Square Bit - normal

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

E E E E E E E E E E E E E E E

15 17 19 20 22 23 23 26 26 28 30 30 32 32 34

28 28 28 28 28 28 28 32 32 32 32 32 32 32 32

65 65 65 65 65 65 65 65 65 65 65 65 65 65 65

14 14 14 14 14 14 14 14 14 14 14 14 14 14 14

1/2" Universal Joint sockets - long Type

➊

A/F mm

Drawing

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

E E E E E E E E E E E E E E E

D

20 ACTION IMPACT SOCKETS

➋

D1 mm

D2 mm

L mm

L2 mm

15 17 19 20 22 23 23 26 26 28 30 30 32 32 34

28 28 28 28 28 28 28 32 32 32 32 32 32 32 32

90 90 90 90 90 90 90 90 90 90 90 90 90 90 90

14 20 20 20 20 20 20 20 20 25 25 25 25 25 25

E

Type

Metrical DO65226005 DO65226006 DO65226008 DO65226010 DO65226012 DO65226014 DO65226016

A/F mm

Drawing

D2 mm

L mm

L1 mm

5 6 8 10 12 14 16

D D D D D D D

25 25 25 25 25 25 25

55 55 55 55 55 55 55

7 7 9 9 11 11 13

1/2" Impact sockets Triple Square Bit - long Type

Metrical DO65227005 DO65227006 DO65227008 DO65227010 DO65227012 DO65227014 DO65227016

A/F mm

Drawing

5 6 8 10 12 14 16

D D D D D D D

Metrical DO65121006 DO65121007 DO65121008 DO65121009 DO65121010 DO65121011 DO65121012 DO65121013 DO65121014 DO65121015 DO65121016 DO65121017 DO65121018 DO65121019

➊

➍

D2 mm

L mm

L1 mm

25 25 25 25 25 25 25

100 100 100 100 100 100 100

7 7 9 9 11 11 13

1/2" Universal Joint sockets hex head Type

➌

➋

➌

➎

A/F mm

Drawing

D2 mm

L mm

L1 mm

6 7 8 9 10 11 12 13 14 15 16 17 18 19

E E E E E E E E E E E E E E

28 28 28 28 28 28 28 28 28 28 28 28 28 28

75 75 75 75 75 75 75 75 75 75 75 75 75 75

13 13 20 20 20 20 20 20 20 20 20 20 20 20

➍

➎

1/2" 1/2" Universal Joint sockets for internal Torx® Type

➊

➋

Metrical DO64921025 DO64921027 DO64921030 DO64921040 DO64921045 DO64921047 DO64921050 DO64921055 DO64921060

A/F mm

Drawing

D1 mm

L mm

T25 T27 T30 T40 T45 T47 T50 T55 T60

E E E E E E E E E

28 28 28 28 28 28 28 28 28

70 70 70 70 70 70 70 70 70

1/2" Universal Joint sockets for external Torx® Type

➋

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

E10 E11 E12 E14 E16 E18 E20 E22 E24

E E E E E E E E E

13 14 15 17 18,5 20,5 22,5 24,5 26,5

28 28 28 28 28 28 32 32 32

65 65 65 65 65 65 70 70 70

7,5 8,0 8,5 10 11 12 13,5 15 17

3/4"

Metrical DO68720010 DO68720011 DO68720012 DO68720014 DO68720016 DO68720018 DO68720020 DO68720022 DO68720024

➊

Torx® is a trademark of Textron. .

1/2" Pin and Ring DO1012-0-000

1/2"

ACTION IMPACT SOCKETS 21

Impact sockets 3/4" 3/4" Impact sockets - normal

3/4"

Type

Metrical DO3034-0-013 DO3034-0-014 DO3034-0-015 DO3034-0-016 DO3034-0-017 DO3034-0-018 DO3034-0-019 DO3034-0-020 DO3034-0-021 DO3034-0-022 DO3034-0-023 DO3034-0-024 DO3034-0-025 DO3034-0-026 DO3034-0-027 DO3034-0-028 DO3034-0-029 DO3034-0-030 DO3034-0-031 DO3034-0-032 DO3034-0-033 DO3034-0-034 DO3034-0-035 DO3034-0-036 DO3034-0-037 DO3034-0-038 DO3034-0-041 DO3034-0-042 DO3034-0-043 DO3034-0-046 DO3034-0-047 DO3034-0-048 DO3034-0-050 DO3034-0-055 DO3034-0-060 DO3034-0-063 DO3034-0-065 DO3034-0-067

➊

3/4" Impact sockets - normal (continued)

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 41 42 43 46 47 48 50 55 60 63 65 67

A A A A A A A A A A A A A A A B C C C C C C C C C C C C C C C C C C C C C C

25 25 29 30 31 32 33 34 36 37 38 40 40 41 43 44 45 47 49 49 51 52 53 54 55 57 61 62 63 67 68 69 71 77 84 86 88 90

44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 54 54 54 54 54 54

50 50 50 50 50 50 50 50 50 50 50 50 50 50 54 54 54 54 56 56 56 56 56 56 56 58 58 58 63 63 68 68 72 74 75 75 78 80

12 12 12 12 12 12 14 16 16 16 16 16 16 16 16 23 23 23 23 23 23 23 23 23 24 24 24 24 27 27 32 32 35 35 35 35 38 40

Type

Inch DO3034-0-11/16 DO3034-0-3/4 DO3034-0-13/16 DO3034-0-7/8 DO3034-0-15/16 DO3034-0-1 1/8 DO3034-0-1 3/16 DO3034-0-1 1/4 DO3034-0-1 DO3034-0-1 1/16 DO3034-0-1 5/16 DO3034-0-1 3/8 DO3034-0-1 7/16 DO3034-0-1 1/2 DO3034-0-1 13/16

A/F inch

Drawing

D1 mm

D2 mm

L mm

L2 mm

11/16" 3/4" 13/16" 7/8" 15/16" 1 1/8" 1 3/16" 1 1/4" 1" 1 1/16" 1 5/16" 1 3/8" 1 7/16" 1 1/2" 1 13/16"

A A A A A B B B C C C C C C C

29 30 32 34 36 42 44 44 40 40 47 50 51 53 67

38 38 38 38 38 42 44 44 38 38 44 44 44 44 44

50 50 52 52 52 52 52 52 52 52 56 56 56 56 56

12 14 16 16 16 20 20 20 16 16 23 23 23 23 32

3/4" Impact sockets - long Type

Metrical DO3034-1-013 DO3034-1-014 DO3034-1-015 DO3034-1-017 DO3034-1-018 DO3034-1-019 DO3034-1-020 DO3034-1-021 DO3034-1-022 DO3034-1-023 DO3034-1-024 DO3034-1-025 DO3034-1-026 DO3034-1-027 DO3034-1-028 DO3034-1-029 DO3034-1-030 DO3034-1-031 DO3034-1-032

A/F mm

Drawing

13 14 15 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

A A A A A A A A A A A A A A B C C C C

3/4" Pin and Ring DO1034-0-000

22 ACTION IMPACT SOCKETS

➋

3/4"

➊

➋

➌ D1 mm

D2 mm

L mm

L2 mm

25 25 26 31 32 33 34 36 37 38 39,5 40 41 43 44 45 47 48 49

44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44

95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95

20 20 20 20 20 23 23 23 23 23 51 51 51 62 62 62 62 62 62

➌

3/4" Standard socket

3/4" Impact sockets - long (continued) Type

➊

➋

A/F Drawing mm/inch

Inch DO3034-1-13/16 DO3034-1-7/8 DO3034-1-15/16 DO3034-1-1 DO3034-1-1 1/8 DO3034-1-1 3/16 DO3034-1-1 1/4 DO3034-1-1 5/16 DO3034-1-1 7/16 DO3034-1-1 1/2

A

33 34 35 36 37 38 39 40 41 42 43 44 46 47 48 49 50 52 55 60 65

13/16" 7/8" 15/16" 1" 1 1/8" 1 3/16" 1 1/4" 1 5/16" 1 7/16" 1 1/2"

3/4" Impact sockets 12-point - normal

D1 mm

D2 mm

L mm

L2 mm

C C C C C C C C C C C C C C C C C C C C C

51 52 54 55 55 57 58 58 60 62 63 65 67 68 69 70 71 74 77 84 88

44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 54 54 54 54 54

95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 100 105 105

62 62 62 62 62 60 60 60 60 60 60 60 58 58 58 58 58 58 58 58 58

A A A C B B B C C C

32 34 36 40 42 44 44 47 51 53

38 38 38 38 42 44 44 44 44 44

85 85 85 85 85 85 85 85 85 85

23 23 41 41 52 52 52 52 52 60

B

Type

Metrical DO63845013 DO63845014 DO63845015 DO63845016 DO63845017 DO63845018 DO63845019 DO63845020 DO63845021 DO63845022 DO63845023 DO63845024 DO63845025 DO63845026 DO63845027 DO63845028 DO63845029 DO63845030 DO63845031 DO63845032 DO63845033 DO63845034 DO63845035 DO63845036 DO63845037 DO63845038 DO63845039 DO63845041 DO63845042 DO63845043 DO63845046 DO63845050 DO63845055 DO63845056 DO63845060 DO63845063 DO63845065 DO63845067

➋

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 41 42 43 46 50 55 56 60 63 65 67

A A A A A A A A A A A A B C C C C C C C C C C C C C C C C C C C C C C C C C

23 24 26 27 28 29 30 31 32 34 35 36 38 40 40 42 43 43 44 45 46 48 50 51 52 53 55 58 61 63 67 71 77 77 84 86 88 90

38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 54 54 54 54 54 54

50 50 50 50 50 50 50 52 52 52 52 52 52 52 52 52 52 52 56 56 56 56 56 56 56 56 62 62 62 62 68 70 74 74 75 78 78 80

12 12 12 12 12 12 14 16 16 16 16 18 18 23 23 23 23 23 24 24 24 24 24 24 24 24 28 28 28 28 33 34 35 35 35 37 38 40

C

ACTION IMPACT SOCKETS 23

3/4"

Metrical DO3034-1-033 DO3034-1-034 DO3034-1-035 DO3034-1-036 DO3034-1-037 DO3034-1-038 DO3034-1-039 DO3034-1-040 DO3034-1-041 DO3034-1-042 DO3034-1-043 DO3034-1-044 DO3034-1-046 DO3034-1-047 DO3034-1-048 DO3034-1-049 DO3034-1-050 DO3034-1-052 DO3034-1-055 DO3034-1-060 DO3034-1-065

➊

Impact sockets 3/4" 3/4" Impact sockets - 12-point - long

3/4"

Type

Metrical DO65847013 DO65847014 DO65847015 DO65847016 DO65847017 DO65847018 DO65847019 DO65847020 DO65847021 DO65847022 DO65847023 DO65847024 DO65847025 DO65847026 DO65847027 DO65847028 DO65847029 DO65847030 DO65847031 DO65847032 DO65847033 DO65847034 DO65847035 DO65847036 DO65847037 DO65847038 DO65847039 DO65847040 DO65847041 DO65847042 DO65847043 DO65847044 DO65847045 DO65847046 DO65847047 DO65847048 DO65847049 DO65847050 DO65847051 DO65847052 DO65847053 DO65847054 DO65847055 DO65847056 DO65847057 DO65847058

➊

3/4" Impact sockets - 12-point - long (continued)

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

A A A A A A A A A A A A A A A B C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C

24,5 25,5 27 28 29,5 31 32 34 35 37 38 39 41 42 43 44 46 47 48 49 51 52 53 54 56 57 58 59,5 61 62 63,5 64,5 65,5 66,5 68 69 70 71 72 74 75 77 78 79 80 81

44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 54 54 54 54 54 54 54 54 54

95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 100 100 100 100 100 100 100 100 100 105 105 105 105

9 11 11 11 11 13 13 13 15 15 15 18 18 18 19 19 19 21 21 22 22 22 22 24 24 24 24 24 27 27 27 27 27 30 30 30 30 32 32 32 32 32 35 35 35 37

24 ACTION IMPACT SOCKETS

Type

Metrical DO65847060 DO65847063 DO65847065 DO65847067 DO65847068 DO65847070 DO65847073 DO65847075

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

60 63 65 67 68 70 73 75

C C C C C C C C

84 87 90 92 94 96 100 102

54 54 54 54 54 54 54 64

105 105 105 105 105 105 108 108

37 37 40 40 40 40 42 42

3/4" Impact sockets thin wall - normal Type

Metrical DO61141017 DO61141019 DO61141022 DO61141024 DO61141027 DO61141030 DO61141032 DO61141033 DO61141035 DO61141036 DO61141038 DO61141041

➊

➋

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

➋

17 19 22 24 27 30 32 33 35 36 38 41

A A A A A A B B B B B B

25,5 28,5 33,5 36,5 40,5 43,5 46,5 47,5 51 52 54 57

44 44 44 44 44 44 44 44 44 44 44 44

95 95 95 95 95 95 95 95 95 95 95 95

17 17 23 40 62 62 62 62 62 62 62 60

➌

Thin wall sockets are not covered by the Action warranty.

3/4" Impact sockets extreme thin wall - long ➌ Type

Metrical DO61142027 DO61142032 DO61142041

➊

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

27 32 41

A B C

40 45 54,5

43 45 45

108 108 108

43 43 43

Thin wall sockets are not covered by the Action warranty.

3/4" Hex head socket

3/4" Impact sockets hex head Type

➊

Metrical DO696510A DO696512A DO696514A DO696517A DO696519A DO696522A DO696524A DO696527A

➊

3/4" Impact sockets 4-point

A/F mm

Drawing

D2 mm

L mm

L2 mm

10 12 14 17 19 22 24 27

D D D D D D D D

44 44 44 44 44 44 44 44

100 100 100 100 100 100 100 100

20 20 20 20 20 20 20 20

➋

Metrical DO64742050 DO64742055 DO64742060 DO64742070 DO64742080 DO64742090 DO64742100

A/F mm

Drawing

T50 T55 T60 T70 T80 T90 T100

F F F F F F F

D2 mm

L mm

L1 mm

44 44 44 44 44 44 44

100 100 100 100 100 100 100

5,0 5,5 8,0 9,4 10,5 11,8 13,1

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

16 17 19 20 21 24

B B B B B C

40 40 40 42 42 47

40 40 40 42 42 44

52 52 52 52 52 52

22 22 22 22 22 24

3/4" Impact sockets 8-point

Metrical DO63645019 DO63645024 DO63645027 DO63645030 DO63645032 DO63645038

➍

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

19 24 27 30 32 38

B C C C C C

41 46 53 60 60 70

41 44,5 44,5 44,5 44,5 44,5

52 52 56 60 60 64

15 20 24 28 28 32

➍

A

B

C

D

F

ACTION IMPACT SOCKETS 25

1"

➌

Type

Metrical DO63045016 DO63045017 DO63045019 DO63045020 DO63045021 DO63045024

Type

➋

3/4" Impact sockets for internal Torx®

Type

➌

Impact sockets 1" 1" Impact sockets - normal

1"

Type

Metrical DO4010-0-017 DO4010-0-018 DO4010-0-019 DO4010-0-020 DO4010-0-021 DO4010-0-022 DO4010-0-023 DO4010-0-024 DO4010-0-025 DO4010-0-026 DO4010-0-027 DO4010-0-028 DO4010-0-029 DO4010-0-030 DO4010-0-031 DO4010-0-032 DO4010-0-033 DO4010-0-034 DO4010-0-035 DO4010-0-036 DO4010-0-037 DO4010-0-038 DO4010-0-039 DO4010-0-040 DO4010-0-041 DO4010-0-042 DO4010-0-043 DO4010-0-045 DO4010-0-046 DO4010-0-047 DO4010-0-048 DO4010-0-050 DO4010-0-052 DO4010-0-053 DO4010-0-054 DO4010-0-055 DO4010-0-056 DO4010-0-057 DO4010-0-058 DO4010-0-060 DO4010-0-062 DO4010-0-063 DO4010-0-065 DO4010-0-070 DO4010-0-075 DO4010-0-080

➊

1" Impact sockets - normal (continued)

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 45 46 47 48 50 52 53 54 55 56 57 58 60 62 63 65 70 75 80

A A A A A A A A A A A A A A A A A C C C C C C C C C C C C C C C C C C C C C C C C C C C C C

34 35 35,5 36 37,5 40 41 42 43 44,5 46 47 48 50 51 52 53 55 56 57 59 59,5 60 62 64 65 66 68 69,5 72 73 74 77 78 79 81 83 83 84 87 90 91 93 100 104 109

54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 86 86

58 58 58 58 58 58 58 58 58 58 58 58 60 60 60 60 60 60 65 65 65 67 67 67 74 74 74 74 74 74 74 80 84 84 84 84 84 84 87 87 90 90 90 96 98 100

17 17 17 17 17 17 17 17 17 17 17 17 19 21 21 21 21 21 21 30 30 30 31 31 31 36 36 36 36 36 36 42 44 44 44 44 44 44 44 44 44 44 46 51 52 52

Type

A/F Drawing mm/inch

Metrical DO4010-0-085 DO4010-0-090 DO4010-0-095 DO4010-0-100

85 90 95 100

Inch DO4010-0-1 1/8 DO4010-0-1 5/16 DO4010-0-1 7/16 DO4010-0-1 1/2 DO4010-0-1 11/16 DO4010-0-1 7/8 DO4010-0-2 1/16 DO4010-0-2 1/4 DO4010-0-2 7/16 DO4010-0-2 1/2 DO4010-0-2 7/8

1 1/8" 1 5/16" 1 7/16 1 1/2" 1 11/16" 1 7/8" 2 1/16" 2 1/4" 2 7/16" 2 1/2" 2 7/8"

D2 mm

L mm

L2 mm

C C C C

115 119 130 136

86 86 86 95

100 105 105 105

52 55 55 55

A C C C C C C C C C C

46 53 56 58 65 70 75 84 89 91 102

51 52 52 52 52 58 58 62 62 62 62

58 62 62 62 64 66 70 75 78 80 87

19 21 26 26 27 28 31 34 35 36 41

Metrical DO4010-1-017 DO4010-1-018 DO4010-1-019 DO4010-1-020 DO4010-1-021 DO4010-1-022 DO4010-1-023 DO4010-1-024 DO4010-1-025 DO4010-1-026 DO4010-1-027 DO4010-1-028 DO4010-1-029 DO4010-1-030 DO4010-1-031 DO4010-1-032

➋

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

A A A A A A A A A A A A A A A A

34 34 35,5 36,5 37,5 40 41 42 43 44,5 46 47 48 50 51 52

54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

21 21 21 21 21 21 21 21 21 21 23 23 50 50 50 50

A

26 ACTION IMPACT SOCKETS

D1 mm

1" Impact sockets - long Type

➊

B

C

➊

➋

1" 1" Impact sockets - long (continued) Type

➊

➋

➊

1" Impact sockets - 12-point - normal

Drawing

D1 mm

D2 mm

L mm

L2 mm

Metrical DO4010-1-033 DO4010-1-034 DO4010-1-035 DO4010-1-036 DO4010-1-037 DO4010-1-038 DO4010-1-039 DO4010-1-040 DO4010-1-041 DO4010-1-042 DO4010-1-046 DO4010-1-047 DO4010-1-048 DO4010-1-050 DO4010-1-054 DO4010-1-055 DO4010-1-056 DO4010-1-058 DO4010-1-060 DO4010-1-065 DO4010-1-070 DO4010-1-075 DO4010-1-080 DO4010-1-085 DO4010-1-090 DO4010-1-095 DO4010-1-100 DO4010-1-105 DO4010-1-110 DO4010-1-115

33 34 35 36 37 38 39 40 41 42 46 47 48 50 54 55 56 58 60 65 70 75 80 85 90 95 100 105 110 115

A C C C C C C C C C C C C C C C C C C C C C C C C C C C C C

53 55 56 57 57 59,5 60 62 64 65 69,5 73 74 75 79 81 83 84 87 93 99 104 109 115 125 130 137 143 147 152

53 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 86 86 86 86 86 95 95 95 95

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 105 105 120 125 135 135 140 140 140 140 155 155 155

50 50 50 64 64 64 64 64 64 64 62 62 62 62 60 60 65 65 77 80 80 87 87 90 90 90 90 100 100 100

Inch DO4010-1-15/16 DO4010-1-1 1/16 DO4010-1-1 3/16 DO4010-1-1 5/16 DO4010-1-1 1/2

15/16" 1 1/16" 1 3/16" 1 5/16" 1 1/2"

90 90 90 90 92

21 23 40 40 54

A A A C C

40 44 48 53 58

1" Pin and Ring Type

DO1100-0-000 DO1100-0-086 DO1100-0-095

Squaredrive

D2 mm

1" 1" 1"

54 86 95

51 51 51 52 52

Type

Metrical DO65855016 DO65855017 DO65855018 DO65855019 DO65855020 DO65855021 DO65855022 DO65855023 DO65855024 DO65855025 DO65855026 DO65855027 DO65855028 DO65855029 DO65855030 DO65855031 DO65855032 DO65855033 DO65855034 DO65855035 DO65855036 DO65855037 DO65855038 DO65855039 DO65855040 DO65855041 DO65855042 DO65855043 DO65855044 DO65855045 DO65855046 DO65855047 DO65855048 DO65855050 DO65855051 DO65855052 DO65855053 DO65855054 DO65855055 DO65855056 DO65855057 DO65855058 DO65855060 DO65855062

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 50 51 52 53 54 55 56 57 58 60 62

A A A A A A A A A A A A A A A A A A C C C C C C C C C C C C C C C C C C C C C C C C C C

32 34 35 36 37 38 39 40 41 43 44,5 45 46,5 48 50 51 52 53 55 56 57 59 60 61 62 63,5 65 66 67 68 70 71,5 72,5 75 76 77 78 80 81 82 84 85 87 89

54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 58 58 58 62 62 62 62 62 62 62 62 62 62 62

60 60 60 60 60 60 60 60 60 60 60 60 62 62 62 62 62 62 62 65 67 67 67 70 70 70 74 74 74 74 76 76 76 80 80 84 84 84 84 84 84 87 87 87

11 11 13 13 13 15 15 15 18 18 18 19 19 19 21 21 22 22 22 22 24 24 24 24 24 27 27 27 27 27 30 30 30 32 32 32 32 32 35 35 35 37 37 37

ACTION IMPACT SOCKETS 27

1"

A/F mm/inch

➋

Impact sockets 1" 1" Impact sockets - 12-point - normal (continued)

1"

Type

Metrical DO65855063 DO65855065 DO65855067 DO65855070 DO65855075 DO65855076 DO65855077 DO65855078 DO65855080 DO65855085 DO65855090 DO65855095 DO65855100 DO65855105 DO65855110 DO65855115

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

63 65 67 70 75 76 77 78 80 85 90 95 100 105 110 115

C C C C C C C C C C C C C C C C

90 93 96 100 106 107 109 110 112 118 125 131 137 143 149 155

62 62 62 62 86 86 86 86 86 86 86 86 86 95 95 95

87 90 92 96 98 100 100 100 100 105 105 105 110 110 115 115

37 40 40 40 42 45 45 45 45 52 52 52 58 58 62 62

1" Impact sockets - 12-point - long Type

Metrical DO65857016 DO65857017 DO65857018 DO65857019 DO65857020 DO65857021 DO65857022 DO65857023 DO65857024 DO65857025 DO65857026 DO65857027 DO65857028 DO65857029 DO65857030 DO65857031 DO65857032 DO65857033 DO65857034 DO65857035

➊

➋

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

A A A A A A A A A A A A A A A A A A C C

32 34 35 36 37 38 39 40 41 43 44,5 45 46,5 48 50 51 52 53 55 56

54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

11 11 13 13 13 15 15 15 18 18 18 19 19 19 21 21 22 22 22 22

1" Impact sockets - 12-point - long (continued) Type

Metrical DO65857036 DO65857037 DO65857038 DO65857039 DO65857040 DO65857041 DO65857042 DO65857043 DO65857044 DO65857045 DO65857046 DO65857047 DO65857048 DO65857050 DO65857051 DO65857052 DO65857053 DO65857054 DO65857055 DO65857056 DO65857057 DO65857058 DO65857060 DO65857062 DO65857063 DO65857065 DO65857067 DO65857070 DO65857075 DO65857076 DO65857077 DO65857078 DO65857080 DO65857085 DO65857090 DO65857095 DO65857100 DO65857105 DO65857110 DO65857115

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

36 37 38 39 40 41 42 43 44 45 46 47 48 50 51 52 53 54 55 56 57 58 60 62 63 65 67 70 75 76 77 78 80 85 90 95 100 105 110 115

C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C

57 59 60 61 62 63,5 65 66 67 68 70 71,5 72,5 75 76 77 78 80 81 82 84 85 87 89 90 93 96 100 106 107 109 110 112 118 125 131 137 143 149 155

54 54 54 54 54 54 54 54 54 54 58 58 58 62 62 62 62 62 62 62 62 62 62 62 62 62 62 62 86 86 86 86 86 86 86 86 86 95 95 95

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 105 105 105 120 120 120 125 125 125 135 135 135 135 135 140 140 140 140 155 155 155

24 24 24 24 24 27 27 27 27 27 30 30 30 32 32 32 32 32 35 35 35 37 37 37 37 40 40 40 42 45 45 45 45 52 52 52 58 58 62 62

A

28 ACTION IMPACT SOCKETS

➋

B

C

➊

➋

1" 1" Impact sockets thin wall - long Type

➊

Metrical DO61151019 DO61151024 DO61151027 DO61151028 DO61151030 DO61151032 DO61151033 DO61151036

➊

1" Impact sockets 4-point

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

19 24 27 28 30 32 33 36

A A A A A A A A

33 38 42,5 43 45 47 49 52

54 54 54 54 54 54 54 54

100 100 100 100 100 100 100 100

21 21 23 23 50 50 50 64

Thin wall sockets are not covered by the Action warranty.

➋

Type

Metrical DO60559024 DO60559026 DO60559027 DO60559030 DO60559032 DO60559033

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

24 26 27 30 32 33

B B B B B B

42 44 45 50 52 52

54 54 54 54 54 54

270 270 270 270 270 270

24 26 27 30 32 32

1" Impact sockets hex head Type

➍

➎

Metrical DO696610A DO696612A DO696614A DO696617A DO696619A DO696622A DO696622B DO696624A DO696627A DO696630A DO696632A

➋

Metrical DO63055017 DO63055019 DO63055020 DO63055021

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

17 19 20 21

B B B B

52 52 52 52

52 52 52 52

57 57 57 57

24 24 24 24

1" Impact sockets 8-point Type

Metrisch DO63655019 DO63655024 DO63655027 DO63655030 DO63655032 DO63655035 DO63655038 DO63655046

➎

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

19 24 27 30 32 35 38 46

A A C C C C C C

47 52 58 61 61 66,5 73 86

54 54 54 54 54 58 58 62

58 58 68 70 70 70 70 80

16 16 30 32 32 32 32 42

➌

A/F mm

Drawing

D2 mm

L mm

L2 mm

10 12 14 17 19 22 22 24 27 30 32

D D D D D D D D D D D

54 54 54 54 54 54 54 54 54 54 54

100 100 100 100 100 100 140 100 100 100 100

20 20 20 20 20 20 20 20 20 20 20

D

ACTION IMPACT SOCKETS 29

1"

➌

1" Impact sockets - extra long

Type

➍

Impact sockets 1½" 1½" Socket, normal size

1½" Impact sockets - normal

1½"

Type

Metrical DO5112-0-030 DO5112-0-032 DO5112-0-035 DO5112-0-036 DO5112-0-037 DO5112-0-038 DO5112-0-040 DO5112-0-041 DO5112-0-045 DO5112-0-046 DO5112-0-047 DO5112-0-048 DO5112-0-050 DO5112-0-052 DO5112-0-054 DO5112-0-055 DO5112-0-056 DO5112-0-058 DO5112-0-060 DO5112-0-061 DO5112-0-062 DO5112-0-065 DO5112-0-068 DO5112-0-070 DO5112-0-072 DO5112-0-075 DO5112-0-078 DO5112-0-080 DO5112-0-085 DO5112-0-090 DO5112-0-095 DO5112-0-100 DO5112-0-105 DO5112-0-110 DO5112-0-115 DO5112-0-125

➊

1½" Impact sockets - long

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

30 32 35 36 37 38 40 41 45 46 47 48 50 52 54 55 56 58 60 61 62 65 68 70 72 75 78 80 85 90 95 100 105 110 115 125

A A A A A A A A A A A A A A B B B C C C C C C C C C C C C C C C C C C C

56 58 62 64 65 66 68 70 75 76 77 79 81 83 86 86 86 92 93 95 96 97 104 105 108 110 115 116 125 130 137 140 150 156 160 175

86 86 86 86 86 86 86 86 86 86 86 86 87 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 95 95 95 95 95 95

78 78 78 78 78 78 78 80 84 84 84 84 87 87 90 90 92 92 92 95 95 95 100 100 103 103 110 110 118 118 118 125 125 125 135 135

23 23 23 23 23 24 24 26 27 27 29 29 29 31 36 36 38 38 38 40 40 40 43 43 45 45 50 50 55 55 55 58 58 58 65 65

30 ACTION IMPACT SOCKETS

Type

Metrical DO5112-1-041 DO5112-1-042 DO5112-1-046 DO5112-1-050 DO5112-1-054 DO5112-1-055 DO5112-1-060 DO5112-1-063 DO5112-1-065 DO5112-1-070 DO5112-1-075 DO5112-1-080 DO5112-1-085

➋

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

41 42 46 50 54 55 60 63 65 70 75 80 85

A A A A B B C C C C C C C

70 72 78 81 86 86 94 97 100 105 110 116 125

86 86 86 86 86 86 86 86 86 86 86 86 86

115 115 115 135 140 140 150 150 150 160 170 170 170

30 32 34 36 39 39 41 43 45 47 51 51 56

1½" Impact sockets hex head Type

Metrical DO64865019 DO64865022 DO64865024 DO64865027 DO64865030 DO64865032 DO64865036

DO1112-0-000

Drawing

D2 mm

L mm

L1 mm

19 22 24 27 30 32 36

D D D D D D D

86 86 86 86 86 86 86

120 120 120 120 120 120 120

20 20 20 20 20 20 20

1½"

➋

➌

A/F mm

1½" Pin and Ring

➊

➌

2½" + 5" #5 Spline Drive socket

2½" Impact sockets - normal Type

➊

➋

#5 Spline drive - normal size, 6-point

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

75 77 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 200

A A A C C C C C C C C C C C C C C C C C C C C C C C

118 122 124 130 136 146 149 155 161 167 174 181 188 195 202 208 215 221 227 234 241 248 254 258 265 275

127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 152 152 152

140 140 140 140 145 145 150 155 160 165 170 175 175 180 180 185 185 190 190 195 195 200 200 210 210 220

46 48 51 51 54 54 57 61 64 67 71 75 75 79 79 83 87 91 91 95 100 105 105 110 110 115

Type

Metrical DO67005027 DO67005030 DO67005032 DO67005041 DO67005050 DO67005055 DO67005060 DO67005070

➋

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

27 30 32 41 50 55 60 70

A A B C C C C C

48 51 55 67 75 79 86 99

55 55 55 55 65 65 65 86

80 80 80 80 98 98 106 117

24 24 24 24 38 38 46 57

2½"

Metrical DO6212-0-075 DO6212-0-077 DO6212-0-080 DO6212-0-085 DO6212-0-090 DO6212-0-095 DO6212-0-100 DO6212-0-105 DO6212-0-110 DO6212-0-115 DO6212-0-120 DO6212-0-125 DO6212-0-130 DO6212-0-135 DO6212-0-140 DO6212-0-145 DO6212-0-150 DO6212-0-155 DO6212-0-160 DO6212-0-165 DO6212-0-170 DO6212-0-175 DO6212-0-180 DO6212-0-185 DO6212-0-190 DO6212-0-200

➊

2½" Pin and Ring DO2112-0-000

2½"

A

B

C

D

ACTION IMPACT SOCKETS 31

Various Extension bars & Universal Joints Extension bars with pin hole Type

DO7014-0-050 DO7014-0-100 DO7014-0-150 DO7038-0-075 DO7038-0-100 DO7038-0-125 DO7038-0-150 DO7038-0-200 DO7038-0-250 DO7012-0-075 DO7012-0-100 DO7012-0-125 DO7012-0-150 DO7012-0-175 DO7012-0-250 DO7012-0-300 DO7012-0-460 DO7012-0-610 DO7012-0-915 DO7034-0-075 DO7034-0-100 DO7034-0-125 DO7034-0-150 DO7034-0-175 DO7034-0-200 DO7034-0-250 DO7034-0-300 DO7034-0-330 DO7034-0-400 DO7100-0-075 DO7100-0-100 DO7100-0-125 DO7100-0-150 DO7100-0-175 DO7100-0-200 DO7100-0-250 DO7100-0-300 DO7100-0-330 DO7100-0-400 DO7112-0-125 DO7112-0-250 DO7112-0-500 DO7212-0-125 DO7212-0-250 DO7212-0-500

Extension bar with steel ball

➊

Extension bars with steel ball

Squaredrive

Drawing

D mm

L mm

Type

1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1½" 1½" 1½" 2½" 2½" 2½"

B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B

13 13 13 19 19 19 19 19 19 25 25 25 25 25 25 25 25 25 25 44 44 44 44 44 44 44 44 44 44 54 54 54 54 54 54 54 54 54 54 86 86 86 127 127 127

50 100 150 75 100 125 150 200 250 75 100 125 150 175 250 300 460 610 915 75 100 125 150 175 200 250 300 330 400 75 100 125 150 175 200 250 300 330 400 125 250 500 125 250 500

DO6862075 DO6862100 DO6862125 DO6862150 DO6862250 DO6863075 DO6863100 DO6863125 DO6863250

Drawing

D2 mm

L mm

3/8" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2"

A A A A A A A A A

19 19 19 19 19 25 25 25 25

75 100 125 150 250 75 100 125 250

Squaredrive

Drawing

D2 mm

L mm

1/2" 1/2" 1/2" 1/2" 1/2" 1/2"

A A A A A A

25 25 25 25 25 25

75 100 125 150 200 450

Lock pin retainer Type

DO64524075 DO64524100 DO64524125 DO64524150 DO64524200 DO6452450

DO9014-0-000 DO9038-0-000 DO9012-0-000 DO9034-0-000 DO9100-0-000 DO9112-0-000 DO9212-0-000

Drawing

D2 mm

L mm

1/4" 3/8" 1/2" 3/4" 1" 1½" 2½"

B B B B B C C

16 21 29 44 54 86 152

43 50 60 105 133 182 248

Universal joints with steel ball

DO6781F1T DO6782F2T DO6783F3T DO6784F4T

➍

Squaredrive

Drawing

D2 mm

D1 mm

L mm

1/4" 3/8" 1/2" 3/4"

A A A A

16 21 29 44

24 32 -

43 50 60 105

A

B

A

B

➋

➌

Squaredrive

Pen and ring are not standard on the universal joints with pin hole.

Please order separately.

Type

➊

➋

Universal joints with pin hole Type

➋

Squaredrive

Pen and ring are not standard on the universal joints with pin hole.

Please order separately.

32 ACTION IMPACT SOCKETS

Universal Joint

C

➌

➍

Various Adapters Adapter

➊

Adapters with pin hole Type

➊

➋

DO8014-0-038 DO8038-0-014 DO8038-0-012 DO8012-0-034 DO8012-0-038 DO8034-0-012 DO8034-0-100 DO8100-0-034 DO8100-0-112 DO8112-0-100 DO8134-0-112 DO8212-0-112

Squaredrive

Outside

Drawing

1/4" 3/8" 3/8" 1/2" 1/2" 3/4" 3/4" 1" 1" 1½" 1¾" 2½"

3/8" 1/4" 1/2" 3/4" 3/8" 1/2" 1" 3/4" 1½" 1" 1½" 1½"

A A A A A A A A A A A A

Type

DO6815L3T DO6822F3T DO6823F2T

Type

32 36 48 38 58 63 80 91 95 153 138

DO69121B08 DO69122B08

Quickchange Adapter Drawing

D2 mm

L mm

3/4" 3/8" 1/2"

1/2" 1/2" 3/8"

B B B

44 22 25

56 36 38

Drive-out

1/4" 3/8" 3/8" 1/2" 1/2" 3/4" 1" 1"

1/4" 3/8" 1/2" 3/8" 1/2" 3/4" 3/4" 1"

Impact bit holder ➎ Type

DO69121008 DO69121010 DO69121016 DO69122008 DO69122010 DO69122016

➌

Drive-in

DO69110C08 DO69111C12 DO69111C16 DO69112C12 DO69112C16 DO69114C24 DO69115C24 DO69115C32

Type

➋

Outside

Quickchange adapters

➎

22 22 30 26 40 40 52 52 84 127 127

Squaredrive

Quickchange adapters

➍

L mm

Pen and ring are not standard on the adapters with pin hole.

Please order separately.

Adapters with steel ball

➌

D2 mm

Impact adapters Type

➍

Squaredrive

Hex chuck

D2 mm

L mm

3/8" 1/2"

1/4" 1/4"

22 25

33 41

Squaredrive

Hex chuck

L min

3/8" 3/8" 3/8" 1/2" 1/2" 1/2"

1/4" 5/16" 1/2" 1/4" 5/16" 1/2"

32 37 37 40 40 40

➏

Squaredrive

Hex drive

Drawing

L mm

D mm

1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2"

1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 7/16" 7/16"

C C C C C C C D D

50 75 100 150 50 75 100 75 75

9 9 9 9 13 13 13 13 17

DO69306050 DO69306075 DO69306100 DO69306150 DO69316050 DO69316075 DO69316100 DO69318075 DO69328075

➏ A

B

C

D

ACTION IMPACT SOCKETS 33

Sleeve drive sockets 3/8" - only for impulse wrenches 3/8" Sleeve drive power sockets - long

3/8"

Type

➊

3/8" Sleeve drive power sockets - normal

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

Metrisch DO60913006 DO60913008 DO60913010 DO60913012 DO60913013 DO60913014 DO60913015 DO60913016 DO60913017

6 8 10 12 13 14 15 16 17

D D D D D D D D D

10,5 12,5 15 18 19 20 21 22,5 24

22 22 22 22 22 22 22 22 22

100 100 100 100 100 100 100 100 100

4 8 8 9 9 9 11 11 11

DO60914006 DO60914008 DO60914010 DO60914012 DO60914013 DO60914014 DO60914015 DO60914016 DO60914017

6 8 10 12 13 14 15 16 17

D D D D D D D D D

10,5 12,5 15 18 19 20 21 22,5 24

22 22 22 22 22 22 22 22 22

150 150 150 150 150 150 150 150 150

4 8 8 9 9 9 11 11 11

DO60915006 DO60915008 DO60915010 DO60915012 DO60915013 DO60915014 DO60915015 DO60915016 DO60915017

6 8 10 12 13 14 15 16 17

D D D D D D D D D

10,5 12,5 15 18 19 20 21 22,5 24

22 22 22 22 22 22 22 22 22

200 200 200 200 200 200 200 200 200

4 8 8 9 9 9 11 11 11

Type

Metrisch DO60910010 DO60910011 DO60910012 DO60910013 DO60910014 DO60910015 DO60910016 DO60910017 DO60910018 DO60910019 DO60910021

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

10 11 12 13 14 15 16 17 18 19 21

A A B A A B C C C C C

16 17,5 19 20 21 22 24 25 26 27,5 30

19 19 19 22 22 22 22 22 22 22 22

43 43 43 43 43 43 43 43 43 43 43

8 9 9 9 9 11 11 11 11 11 13

3/8" Sleeve Drive power sockets - Torx® - exter.

Type

Metrisch DO66910005 DO66910006 DO66910007 DO66910008 DO66910010 DO66910011 DO66910012 DO66910014 DO66910016

Drawing

D1 mm

D2 mm

L mm

L2 mm

E5 E6 E7 E8 E10 E11 E12 E14 E16

A A A A A A A A A

8 9 9,5 11 13 14 15,5 17,5 18,5

19 19 19 19 19 19 19 22 22

43 43 43 43 43 43 43 43 43

4,5 5 6 6,5 7,5 8 8,5 10 11

Torx® is a trademark of Textron.

A

34 ACTION IMPACT SOCKETS

B

Sleeve drive power sockets guarantee: • Torque improvement • Reduced vibration • Reduced noise level • Reduced wear

C

➊

➋

➌

A/F mm

Reduced Vibration!

Action sleeve drive power sockets are supported with an O-ring on the axle of the impulse wrench, giving a tighter fit on the tool.

➋

➌

3/8" Sleeve drive power socket, normal size

➊

3/8" Magnetic Sleeve drive power sockets - long Type

➊

➋

Drawing

D1 mm

D2 mm

L mm

L2 mm

Metrisch DO6091P006 DO6091P007 DO6091P008 DO6091P009 DO6091P010 DO6091P011 DO6091P012 DO6091P013 DO6091P014 DO6091P015 DO6091P016 DO6091P017

6 7 8 9 10 11 12 13 14 15 16 17

D D D D D D D D D D D D

11 12 13 15 16 17,5 18,5 20 21 22 24 25

19 19 19 19 19 19 19 22 22 22 22 22

100 100 100 100 100 100 100 100 100 100 100 100

3 3 4 4 4 5 5 6 6 7 7 7

DO6091R006 DO6091R007 DO6091R008 DO6091R009 DO6091R010 DO6091R011 DO6091R012 DO6091R013 DO6091R014 DO6091R015 DO6091R016 DO6091R017

6 7 8 9 10 11 12 13 14 15 16 17

D D D D D D D D D D D D

11 12 13 15 16 17,5 18,5 20 21 22 24 25

19 19 19 19 19 19 19 22 22 22 22 22

150 150 150 150 150 150 150 150 150 150 150 150

3 3 4 4 4 5 5 6 6 7 7 7

DO6091T006 DO6091T007 DO6091T008 DO6091T009 DO6091T010 DO6091T011 DO6091T012 DO6091T013 DO6091T014 DO6091T015 DO6091T016 DO6091T017

6 7 8 9 10 11 12 13 14 15 16 17

D D D D D D D D D D D D

11 12 13 15 16 17,5 18,5 20 21 22 24 25

19 19 19 19 19 19 19 22 22 22 22 22

200 200 200 200 200 200 200 200 200 200 200 200

3 3 4 4 4 5 5 6 6 7 7 7

D

➋

3/8" Torx® Sleeve drive power sockets - internal Type

Metrisch DO68811009 DO68811010 DO68811015 DO68811020 DO68811025 DO68811027 DO68811030 DO68811040 DO68811045 DO68811047 DO68811050 DO68811055

A/F mm

Drawing

L1 mm

D2 mm

L mm

T9 T10 T15 T20 T25 T26 T30 T40 T45 T47 T50 T55

F F F F F F F F F F F F

2,0 2,8 2,8 2,8 3,0 3,0 3,8 3,8 4,3 5,0 5,0 5,0

22 22 22 22 22 22 22 22 22 22 22 22

75 75 75 75 75 75 75 75 75 75 75 75

3/8" Sleeve drive power sockets - hex head Type

Metrisch DO68916003 DO68916004 DO68916005 DO68916006 DO68916007 DO68916008 DO68916009 DO68916010 DO68916011 DO68916012 DO68916013 DO68916014 DO68916015 DO68916016

➌

A/F mm

Drawing

L1 mm

D2 mm

L mm

3 4 5 6 7 8 9 10 11 12 13 14 15 16

F F F F F F F F F F F F F F

11 11 11 11 16 16 16 16 16 16 16 16 16 16

22 22 22 22 22 22 22 22 22 22 22 22 22 22

75 75 75 75 75 75 75 75 75 75 75 75 75 75

F

ACTION IMPACT SOCKETS 35

3/8"

➌

A/F mm

Sleeve drive power socket, long size

Sleeve drive sockets 1/2" - only for impulse wrenches 1/2" Sleeve drive power sockets - normal

1/2"

Type

Metrical DO60920012 DO60920013 DO60920014 DO60920015 DO60920016 DO60920017 DO60920018 DO60920019 DO60920021 DO60920022 DO60920023 DO60920024 DO60920025 DO60920027 DO60920030 DO60920032

➊

1/2" Sleeve drive power sockets - long ➌

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

12 13 14 15 16 17 18 19 21 22 23 24 25 27 30 32

A A A A A A A A B C C C C C C C

20 21 22,5 23,7 25 26 27,5 28,7 30 32 32 35 36 39 42 44

25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 30

52 52 52 52 52 52 52 52 52 52 52 52 57 57 62 62

12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

1/2" Sleeve drive power sockets Torx® - external Type

Metrical DO66920010 DO66920011 DO66920012 DO66920014 DO66920016 DO66920018 DO66920020 DO66920022 DO66920024

➋

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

E10 E11 E12 E14 E16 E18 E20 E22 E24

A A A A A A A A A

14 15 16 18 20 22 25 27 29

25 25 25 25 25 25 30 30 30

52 52 52 52 52 52 52 52 52

7,5 8 8,5 10 11 12,5 14 15 16,5

Type

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

Metrical DO60923010 DO60923012 DO60923013 DO60923014 DO60923015 DO60923017 DO60923019

10 12 13 14 15 17 19

D D D D D D D

17 19,5 20,5 21,5 22,5 25 28

25 25 25 25 25 25 25

100 100 100 100 100 100 100

12 12 12 12 12 13 13

DO60924010 DO60924012 DO60924013 DO60924014 DO60924015 DO60924017 DO60924019

10 12 13 14 15 17 19

D D D D D D D

17 19,5 20,5 21,5 22,5 25 28

25 25 25 25 25 25 25

150 150 150 150 150 150 150

12 12 12 12 12 13 13

➋

DO60925010 DO60925012 DO60925013 DO60925014 DO60925015 DO60925017 DO60925019

10 12 13 14 15 17 19

D D D D D D D

17 19,5 20,5 21,5 22,5 25 28

25 25 25 25 25 25 25

200 200 200 200 200 200 200

12 12 12 12 12 13 13

➌

Torx® is a trademark of Textron.

A

36 ACTION IMPACT SOCKETS

B

C

D

➊

1/2" 1/2" Magnetic Sleeve drive power sockets - long Type

➊

➋

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

Metrical DO6092P010 DO6092P011 DO6092P012 DO6092P013 DO6092P014 DO6092P015 DO6092P016 DO6092P017 DO6092P018 DO6092P019

10 11 12 13 14 15 16 17 18 19

D D D D D D D D D D

17,5 18,5 20 21 22,5 23,5 25 26 27,5 28,5

25 25 25 25 25 30 30 30 30 30

100 100 100 100 100 100 100 100 100 100

4 5 5 6 6 7 7 7 8 8

DO6092R010 DO6092R011 DO6092R012 DO6092R013 DO6092R014 DO6092R015 DO6092R016 DO6092R017 DO6092R018 DO6092R019

10 11 12 13 14 15 16 17 18 19

D D D D D D D D D D

17,5 18,5 20 21 22,5 23,5 25 26 27,5 28,5

25 25 25 25 25 30 30 30 30 30

150 150 150 150 150 150 150 150 150 150

12 12 12 12 12 12 13 13 13 13

DO6092T010 DO6092T011 DO6092T012 DO6092T013 DO6092T014 DO6092T015 DO6092T016 DO6092T017 DO6092T018 DO6092T019

10 11 12 13 14 15 16 17 18 19

D D D D D D D D D D

17,5 18,5 20 21 22,5 23,5 25 26 27,5 28,5

25 25 25 25 25 30 30 30 30 30

200 200 200 200 200 200 200 200 200 200

12 12 12 12 12 12 13 13 13 13

1/2" Torx® Sleeve drive power sockets - internal Type

Metrical DO68821020 DO68821025 DO68821027 DO68821030 DO68821040 DO68821045 DO68821047 DO68821050 DO68821055 DO68821060 DO68821070 DO68821080 DO68821090 DO68821100

A/F mm

Drawing

L1 mm

D2 mm

L mm

T20 T25 T27 T30 T40 T45 T47 T50 T55 T60 T70 T80 T90 T100

F F F F F F F F F F F F F F

2,8 3,0 3,0 3,8 3,8 4,3 5,0 5,0 5,5 8,0 9,4 10,5 11,8 13,1

25 25 25 25 25 25 25 25 25 25 25 25 25 25

75 75 75 75 75 75 75 75 75 75 75 75 75 75

1/2" Sleeve drive power sockets for hex head Type

Metrical DO68925003 DO68925004 DO68925005 DO68925006 DO68925007 DO68925008 DO68925009 DO68925010 DO68925011 DO68925012 DO68925013 DO68925014 DO68925015 DO68925016 DO68925017 DO68925018 DO68925019

D

➋

➌

A/F mm

Drawing

L1 mm

D2 mm

L mm

3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

F F F F F F F F F F F F F F F F F

11 11 15 15 20 25 25 25 25 25 25 25 25 25 25 25 25

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75

F

ACTION IMPACT SOCKETS 37

1/2"

➌

➊

Sleeve drive sockets & Extension bars 3/8" - 3/4" Extension bar

3/4" Sleeve drive power sockets - normal

3/4"

Type

Metrical DO60940017 DO60940018 DO60940019 DO60940021 DO60940022 DO60940023 DO60940024 DO60940026 DO60940027 DO60940028 DO60940029 DO60940030 DO60940032 DO60940033 DO60940034 DO60940035 DO60940036 DO60940038 DO60940041 DO60940046 DO60940050

➊

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

17 18 19 21 22 23 24 26 27 28 29 30 32 33 34 35 36 38 41 46 50

A A A A A A A A A B C C C C C C C C C C C

31 32 33 35 37 38 39 41 43 44 45 47 49 51 52 53 54 57 60 67 71

44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 54 54

65 65 65 65 65 65 65 65 65 68 68 68 70 70 70 70 70 72 72 77 77

12 12 14 16 16 16 16 16 16 20 20 20 20 20 20 20 20 22 22 23 23

3/4" Sleeve drive power sockets - hex head Type

Metrical DO68945010 DO68945012 DO68945014 DO68945016 DO68945017 DO68945019 DO68945022 DO68945024 DO68945027 DO68945030 DO68945032 DO68945033 DO68945036 DO68945038

3/4" Sleeve drive power sockets Torx® external Type

Metrical DO66940018 DO66940020 DO66940022 DO66940024

A/F mm

Drawing

D1 mm

D2 mm

L mm

L1 mm

10 12 14 16 17 19 22 24 27 30 32 33 36 38

F F F F F F F F F F F F F F

-

44 44 44 44 44 44 44 44 44 44 44 44 44 44

100 100 100 100 100 100 100 100 100 100 100 100 100 100

20 20 20 20 20 20 20 20 20 20 20 20 20 20

A/F mm

Drawing

D1 mm

D2 mm

L mm

L2 mm

E18 E20 E22 E24

A A A A

26 28 31 33

44 44 44 44

65 65 65 65

12,5 14 15 16,5

➊

Torx® is a trademark of Textron.

Extension bars for sleeve drive power sockets

➍

Type

A/F mm

Drawing

Länge mm

D2 mm

DO64614075 DO64614125 DO64614250 DO64624075 DO64624125 DO64624175 DO64624250 DO64644175 DO64644250 DO64644330

3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4"

D D D D D D D D D D

75 125 250 75 125 175 250 175 250 330

22 22 22 25 25 25 25 44 44 44

Quickchange adapters Type

➋

➌

DO69111E08 DO69111E14 DO69112E08 DO69112E14 DO69114E14

Type

Hex chuck

D2 mm

L mm

3/8" 3/8" 1/2" 1/2" 3/4"

1/4" 7/16" 1/4" 7/16" 7/16"

22 22 25 25 44

52 62 60 70 80

➍

➏

Drive-in

Drive-out

D2 mm

L mm

3/8" 1/2" 3/4" 3/8" 3/8" 1/2" 3/4"

1/2" 3/8" 1/4" 3/8" 3/8" 1/2" 3/4"

20 25 44 19 19 25 44

80 75 90 75 100 100 125

DO69151116 DO69152112 DO69154116 DO69151112 DO69151212 DO69152216 DO69154324

➌

➎

Squaredrive

Quickchange adapters

➋

➎

➏ A 38 ACTION IMPACT SOCKETS

B

C

D

F

Impact sockets Sets 3/8" IMPACT SOCKET SET

Type DO0038-0-010

CONTENTS:

1/2" Impact socket set

Type DO0012-0-000S

CONTENTS:

10 Impact sockets, normal size 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 19 mm Package: plastic tray & metal case

10 Impact sockets, normal size 9 - 10 - 11 - 13 - 14 - 17 - 19 - 22 - 24 - 27 mm Package: metal case

3/4" Impact socket set

Type DO0034-0-008

CONTENTS:

1/2" Ex- & internal Torx速 Impact socket

Type DO69623161

CONTENTS:

8 Impact sockets, normal size 24 - 27 - 30 - 32 - 33 - 36 - 38 - 41 mm Package: plastic tray & metal case

9 Impact sockets, thin wall Torx速 external E10 - E11 - E12 - E14 - E16 - E18 - E20 - E22 - E24 7 Impact sockets Torx速 internal, length 55 mm T40 - T45 - T47 - T50 - T55 - T60 - T70 Package: blow-mold case

1/2" Hex Head in set

Type DO69521093

CONTENTS:

9 Hex Head power sockets 4 - 5 - 6 - 8 - 10 - 12 - 14 - 17 - 19 mm Package: plastic tray & metal case

1" Impact socket set, long

Type DO69551041

CONTENTS:

4 Impact sockets, long size 27 - 30 - 32 - 33 mm Package: plastic tray & metal case

1" Impact socket set, long

Type DO0100-1-007

CONTENTS:

7 Impact sockets 24 - 27 - 30 - 32 - 33 - 36 41 mm Package: blow-mold case

ACTION IMPACT SOCKETS 39

Impact sockets Sets 3/8" IMPACT SOCKET SET

Type DO0038-0-010

CONTENTS:

1/2" Impact socket set

Type DO0012-0-000S

CONTENTS:

10 Impact sockets, normal size 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 19 mm Package: plastic tray & metal case

10 Impact sockets, normal size 9 - 10 - 11 - 13 - 14 - 17 - 19 - 22 - 24 - 27 mm Package: metal case

3/4" Impact socket set

Type DO0034-0-008

CONTENTS:

1/2" Ex- & internal Torx速 Impact socket

Type DO69623161

CONTENTS:

8 Impact sockets, normal size 24 - 27 - 30 - 32 - 33 - 36 - 38 - 41 mm Package: plastic tray & metal case

9 Impact sockets, thin wall Torx速 external E10 - E11 - E12 - E14 - E16 - E18 - E20 - E22 - E24 7 Impact sockets Torx速 internal, length 55 mm T40 - T45 - T47 - T50 - T55 - T60 - T70 Package: blow-mold case

1/2" Hex Head in set

Type DO69521093

CONTENTS:

9 Hex Head power sockets 4 - 5 - 6 - 8 - 10 - 12 - 14 - 17 - 19 mm Package: plastic tray & metal case

1" Impact socket set, long

Type DO69551041

CONTENTS:

4 Impact sockets, long size 27 - 30 - 32 - 33 mm Package: plastic tray & metal case

1" Impact socket set, long

Type DO0100-1-007

CONTENTS:

7 Impact sockets 24 - 27 - 30 - 32 - 33 - 36 41 mm Package: blow-mold case

ACTION IMPACT SOCKETS 39

Torque sockets 1/2" - 1" 1/2" Torque-limited impact socket set

Type DORR-100/SET Type

Square- A/F Loosening drive mm Nm

DORR-100/17 1/2" DORR-100/19 1/2" DORR-100/21 1/2"

17 19 21

Full force Full force Full force

1/2 + 1" Torque sockets

Tight Length Outside max. mm Ø Nm mm

100 100 100

100 100 100

26 29 30

Weight gr

400 400 400

1/2" Wheel nut impact socket set, long, extra long

Type DO61120310

CONTENTS

3 Impact sockets with plastic stop and sleeve blue 17 mm - yellow 19 mm - red 21 mm Package: blow-mold case

1/2" Wheel nut impact sockets with plastic stop and

sleeve Type

Metrical DO61126015 DO61126017 DO61126019 DO61126021 DO61126022

A/F mm

Colour

D1 mm

D2 mm

L mm

L1 mm

L2 mm

15 17 19 21 22

White Blue Yellow Red Green

25 27 29 31 32.5

30 30 30 30 30

85 85 85 85 85

60 60 60 60 60

13 14 15 17 18

Type 1/2"

A/F mm

Nm

Length

Colour

DO68122D17 DO68122L17 DO68122G19 DO68122L19 DO68122M19 DO68122E21 DO68122L21

17 17 19 19 19 21 21

75 110 90 110 135 80 110

220 220 220 220 220 220 220

Green Red Yellow Blue Grey Black Brown

Type 1"

A/F mm

Nm

Length

Colour

DO68552U23 DO68552W24 DO68552W27 DO68552Z27 DO68552Y29 DO68552B30 DO68552A32 DO68552C32 DO68552F32 DO68552A33 DO68552C33

23 24 27 27 29 30 32 32 32 33 33

250 350 350 450 400 550 500 600 700 500 600

305 305 305 305 305 305 305 305 305 305 305

-

1/2" Wheel nut impact socket set, long

Type DO69523031

CONTENTS:

3 Impact sockets with plastic stop and sleeve blue 17 mm - yellow 19 mm - red 21 mm Package: blow-mold case

1/2" Wheel nut impact sockets - extra long with

plastic stop and sleeve Type

Metrical DO6112J017 DO6112J019 DO6112J021 DO6112J022

A/F mm

Colour

D1 mm

D2 mm

L mm

L1 mm

L2 mm

17 19 21 22

Blue Yellow Red Green

27 29 31 32,5

25 30 30 30

130 130 130 130

87 87 87 87

24 24 24 24

For optimal protection of aluminium rims, sockets with plastic stop and sleeve in five different bright colours for easy identification.

ACTION IMPACT SOCKETS 41

ERIKS vestigingen Gereedschappen

ERIKS Servicecenters

Rotterdam Sevillaweg 75 3047 AL Rotterdam T (010) 245 50 00 F (010) 262 06 22 E info.rotterdam@eriks.nl

Alkmaar Saffierstraat 3 1812 RM Alkmaar T (072) 514 17 17 F (072) 514 16 25 E esc.alkmaar@eriks.nl

Ede Galvanistraat 34 6716 AE Ede T (0318) 43 96 14 F (0318) 64 01 04 E ede@eriks.nl

Leeuwarden James Wattstraat 19 8912 AS Leeuwarden T (058) 215 05 87 F (058) 215 85 16 E leeuwarden@eriks.nl

Almelo Plesmanweg 12 7602 PE Almelo T (0546) 87 30 70 F (0546) 87 32 68 E almelo@eriks.nl

Eerbeek Loubergweg 19 6961 EJ Eerbeek T (0313) 67 95 00 F (0313) 65 47 68 E eerbeek@eriks.nl

Maastricht Amerikalaan 28 6199 AE Maastricht-Airport T (043) 604 91 80 F (043) 363 87 28 E maastricht@eriks.nl

Amsterdam Dynamostraat 46-48 1014 BK Amsterdam-Westpoort T (020) 448 96 10 F (020) 613 77 65 E amsterdam@eriks.nl

Eindhoven De Witbogt 22 a 5652 AG Eindhoven T (040) 291 19 00 F (040) 291 19 09 E eindhoven@eriks.nl

Rijnmond Shannonweg 33, Haven 5079 3197 LG Rotterdam-Botlek T (010) 231 34 00 F (010) 296 96 18 E rijnmond@eriks.nl

Arnhem Pieter Calandweg 46 6827 BK Arnhem T (026) 362 92 44 F (026) 361 00 63 E arnhem@eriks.nl

Emmen Willem Schoutenstraat 11 b 7825 VV Emmen T (0591) 66 80 00 F (0591) 66 80 06 E emmen@eriks.nl

Roermond Ada Byronweg 11 6045 GM Roermond T (0475) 37 22 70 F (0475) 37 23 05 E roermond@eriks.nl

Bergen op Zoom Van Konijnenburgweg 44 b 4612 PL Bergen op Zoom T (0164) 27 55 44 F (0164) 27 55 49 E bergenopzoom@eriks.nl

Hengelo Hassinkweg 16 7556 BV Hengelo T (074) 291 57 57 F (074) 291 59 39 E hengelo@eriks.nl

Tilburg Ellen Pankhurststraat 9 5032 MD Tilburg T (013) 571 45 61 F (013) 570 06 42 E tilburg@eriks.nl

Delfzijl Deltaweg 30 9936 HK Farmsum T (0596) 63 38 20 F (0596) 63 38 29 E delfzijl@eriks.nl

Hoorn De Factorij 35 d 1689 AK Zwaag T (0229) 21 28 82 F (0229) 21 93 74 E hoorn@eriks.nl

Zwolle Ampèrestraat 27 8013 PT Zwolle T (038) 467 29 20 F (038) 467 29 29 E zwolle@eriks.nl

Den Haag / Marofra Neckar 2 2491 BD Den Haag T (070) 381 84 84 F (070) 381 84 36 E denhaag@eriks.nl

Gouda Marconistraat 117 2809 PG Gouda T (0182) 33 11 60 F (0182) 37 82 02 E gouda@eriks.nl

Doetinchem Havenstraat 55 7005 AG Doetinchem T (0314) 34 37 20 F (0314) 34 37 41 E doetinchem@eriks.nl

Groningen Rouaanstraat 8 9723 CD Groningen T (050) 368 49 99 F (050) 368 49 98 E groningen@eriks.nl

www.eriks.nl