Takaya Flying Test

A cable harness can also be known as a cable assembly, wire harness, wiring loom or a wiring assembly, and is best described as a string of wires or cables that are capable of transmitting informational signals or operating currents. Data Patterns

has

built

high

reliability

Cable

Harness

Test

Systems for large installations. These are primarily used in launch vehicle aircraft and missile level cable harness test validation.

The

cable

harness

tester

checks

whether

individual wires are connected to correct pins, and whether the connection is good. A base plate is provided, which is

mounted a plug board for second sockets at the cable harness end.

The cable harness tester checks whether individual wires are connected to correct pins, and whether the connection is good. A base plate is provided, which is mounted a plug board for second sockets at the cable harness end. Harness test

modules

provides

a

mechanism

to

perform

tests

mechanically, running through a series of specified tests and checking the results for a satisfactory outcome.

Harness test modules provides a mechanism to perform tests mechanically, running through a series of specified tests and checking the results for a satisfactory outcome. A variety of switching harness test probes is available from equip-test for cable harness testing. The product selection covers threaded and non-threaded types with a selection of tip styles centre and travel ranges. Wherever a cable harness is being assembled it is essential that the harness or loom is tested for build and or material defects. Testing cable harness typically include: Continuity resistance, short circuit failure, high voltage insulation resistance.

URL:--> https://www.equip-test.com/ Address:-> Equip–Test Kft., Vágóhíd u. 19.

H-2220 Vecsés, Hungary +36-29/550-940 Fax: +36-29/356-480