Global GlobalPresence Presencefor for Peace PeaceofofMind Mind
Pneumatic Actuator Controls
The Best Technology at the Lowest Cost = At Least 22% to 39% Cost Saving
Optimum Method
Vs
Conventional Method
Optimum Method
Vs
Conventional Method
At Least 22% to 39% Cost Saving
Highest Safety Factors
Relief Valves Correctly Sized and Safe to match the Filter Regulator
Reduced Spares Requirement
Highest Flow Products
Check Valves, Flow Control Valves, Pilot Valves, Filter Regulators, Filter Boosters and Solenoid Valves
Innovative Innovative and and Reliable Reliable Valve Valve Solutions Solutions
48 Hr Despatch for Efficient and Quick Delivery Configurable Valve Control Products Simplified for Ease of Selection
www.bifold.co.uk bifold.co.uk
¼" & ½'' - Modular & Nippled Solutions
Comparison Optimum Method
Conventional Method
30% Cost Saving 132% More Flow ¼" MODULAR SOLUTION - CIRCUIT CV
¼" NIPPLED CIRCUIT - CIRCUIT CV
Cv to Open Cv to Close No QEV
0.88
2
With QEV
0.77
3.5
Cv to Open Cv to Close
Please note that Solenoid Cv is 2.0
No QEV
0.57
0.88
With QEV
0.54
3.5
Please note that Solenoid Cv is 1.0
Relief Valves correctly sized and safe to match the Filter Regulator Optimum Method
Conventional Method
25% Cost Saving 135% More Flow ½" MODULAR SOLUTION - CIRCUIT CV
¼" PILOT VALVE CIRCUIT - CIRCUIT CV
Cv to Open Cv to Close
Cv to Open Cv to Close
No QEV
1.33
2.0
No QEV
0.57
0.88
With QEV
1.09
3.5
With QEV V
0.54
3.5
Please note that Solenoid Cv is 2.0
Relief Valves correctly sized and safe to match the Filter Regulator
2
bifold.co.uk
BFD521 November ‘16
Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team. When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.
Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.
is a member of the of companies
© Bifold 2016
½" & 1'' - Modular & Nippled Solutions
Comparison Optimum Method
Conventional Method
22% Cost Saving 75% More Flow ½" FILTER BOOSTER CIRCUIT - CIRCUIT CV
½" PILOT VALVE CIRCUIT - CIRCUIT CV
Cv to Open* Cv to Close
Cv to Open Cv to Close
No QEV
1.96
1.0
No QEV
1.13
1.98
With QEV
1.94
8.9 8.
With QEV
1.11
8.9
*Effective
Relief Valves correctly sized and safe to match the Filter Regulator Optimum Method
Conventional Method
39% Cost Saving 200% More Flow 1" FILTER BOOSTER CIRCUIT - CIRCUIT CV
1" PILOT VALVE CIRCUIT - CIRCUIT CV
Cv to Open* Cv to Close e
Cv to Open Cv to Close
No QEV
10.73
6.0
No o QEV
3.54
5.98
With QEV
8.98
10.0
With ith QEV
3.25
10.0
*Effective
Relief Valves correctly sized and safe to match the Filter Regulator
bifold.co.uk BFD521 November ‘16
Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team. When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.
Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.
is a member of the
3
of companies
© Bifold 2016
¼'' - Pneumatic Direct Acting Solenoid (Cv 1.0) - Circuit
Circuit
Schematic ¼'' Simplest / Bare Circuit
7
1
2
12
3
4a 4b
¼'' Maximum Circuit Options (Non Partial Stroke) 8 5
8
8 9
TO
TO 1
7
11
2
5
o
12
o
3 6
6
6
10
5
6
10
10
4a
4a 4b
1
2
Filter Regulator
Solenoid Valves (Manual Override)
Solenoid Valves (Auto Reset)
3
4
5
Quick Exhaust Valve
Bug Vent/ Silencer
Ball Valve
o
2a
2c
2b
Cyl to Exh Cv 1.9 Into Cyl Cv 3.5
Cv 2.0
Cv 1.0
Cv 0.7
2a
2b
2c
2a
2a 2b 2c 2a FP06P-SI-04-32-NU-V-77A-24D-57 2a FP10P-SI-08-32-NU-V-77A-24D-28LP 2a 2b FP06P-SI-04-32-NU-V-27A-24D-57 2b FP10P-SI-08-32-NU-V-27A-24D-28LP 2b SC06-20-FR-SR-MD-10-V-X3 2c FP06P-S1-A04-32-NU-V-27A-24D-57 2c FP10P-S1-A08-32-NU-V-27A-24D-28LP 2c
Catalogue Section 13 6 Check Valve
2b
2c
2a
FP06P-SI-04-32-NU-V-77A-24D-ML-30 FP06P-SI-04-32-NU-V-27A-24D-ML-30 FP06P-S1-A04-32-NU-V-27A-24D-ML-30 FP10P-SI-08-32-NU-V-77A-24D-ML-28LP FP10P-SI-08-32-NU-V-27A-24D-ML-28LP FP10P-S1-A08-32-NU-V-27A-24D-ML-28LP
Catalogue Section 04
Cv 2.1
4a
2c
2b
Catalogue Section 04
S12-QEV
4b
¼" K4-(1/4NPT)-316 ½" K4-(1/2NPT)-316
BV0104F025TT1KLK-N
Catalogue Section 19 Configurator Catalogue Section 26a
7
8
9
10
Gauge
Block and Bleed Valves
Pressure Relief Valve
Cylinder Plug Valve
11
12
Mechanical Valves
SW Soldo Limit Switch Box Series
o
8a Cv 0.5 8b Cv 0.32
Cv 1.2
8a
PCV-04F-04F-13-023-V
X10 or X11
Cv 2.1
Cv 1.5
Cv 0.73
8b
NV0304F02M5V6K NV0404F02M5V6K
S06-PR4.5
CPV-04F-04F-V
BXS-04-04-M9-32-NU-04-V BXS-04-A04-M9-32-NU-04-V
Catalogue Section 20 Catalogue Section 03 Catalogue Section 26a Catalogue Section 16 Catalogue Section 14 Catalogue Section 09
4
bifold.co.uk
BFD521 November ‘16
Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team. When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.
Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.
SW0120E-10X23A6
Soldo Controls
is a member of the of companies
© Bifold 2016
¼'' - Pneumatic Direct Acting Solenoid (Cv 1.0) - Partial Stroke
Partial Stroke
Schematic
7
4a
4a 7
6a 5
1
8
2
6b 3 4a
6c
4b
1
2
3
4
Filter Regulator
Solenoid Valves (Auto Reset)
Quick Exhaust Valve
Bug Vent / Silencer
Cv 0.7
Cv 1.0
2a
SC06-20-FR-SR-MD-10-V-X3
2c
2b
2a
2a FP06P-SI-04-32-NU-V-77A-24D-57 2b FP06P-SI-04-32-NU-V-27A-24D-57 2c FP06P-S1-A04-32-NU-V-27A-24D-57
Catalogue Section 13
2c
2b
2a FP10P-SI-08-32-NU-V-77A-24D-28LP 2b FP10P-SI-08-32-NU-V-27A-24D-28LP 2c FP10P-S1-A08-32-NU-V-27A-24D-28LP
5
6
Gauge
Cylinder Plug Valves
Catalogue Section 03
bifold.co.uk BFD521 November ‘16
¼" CPV-04F-04F-V
6b
6c
½" S12-CPV ¾" S19-CPV
Catalogue Section 14 Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team. When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.
4b
S12-QEV
¼" K4-(1/4NPT)-316 ½" K4-(1/2NPT)-316
Catalogue Section 19
Configurator
7
8
Mechanical Valves
SW Soldo Limit Switch Box Series
¼" Cv 2.1 ½" Cv 5.1 ¾" Cv 9.8
X10 or X11
4a
Catalogue Section 04
6a
Cyl to Exh Cv 1.9 Into Cyl Cv 3.5
Cv 2.0
Cv 0.73
Cv 0.73
7a
7b
BXS-04-04-M1-32-NU-00-V BXS-04-A04-M1-32-NU-00-V
BXS-04-04-M13-32-NU-00-V BXS-04-A04-M13-32-NU-00-V
Catalogue Section 09
Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.
SW0120E-10X23A6
Soldo Controls
is a member of the
5
of companies
© Bifold 2016
½'' - Pneumatic Direct Acting Solenoid (Cv 2.0) - Circuit
Circuit
Schematic ½'' Simplest / Bare Circuit 7
1
2
12
3
4a 4b
½'' Maximum Circuit Options (Non Partial Stroke) 8
8
8 9
TO
TO
5
1
7
11
2
5
o
12
o
3 6
6
6
5
6
10
10
4a
10
4a 4b
1
2
Filter Regulator
Solenoid Valves (Auto Reset)
Solenoid Valves (Manual Override)
3
4
5
6
Quick Exhaust Valve
Bug Vent / Silencer
Ball Valve
Check Valve
o
Cv 2.0
Cv 2.6
2a
Cv 2.0
2c
2b
2a
Cyl to Exh Cv 6.5 Into Cyl Cv 8.3
4a
SH12-FR-SR-AD-10-X3
2a FP10P-SI-08-32-NU-V-77A-24D-28LP 2a FP10P-SI-08-32-NU-V-77A-24D-ML-28LP 2b FP10P-SI-08-32-NU-V-27A-24D-28LP 2b FP10P-SI-08-32-NU-V-27A-24D-ML-28LP 2c FP10P-S1-A08-32-NU-V-27A-24D-28LP 2c FP10P-S1-A08-32-NU-V-27A-24D-ML-28LP
Catalogue Section 13
Catalogue Section 04
S19-QEV
Cv 4.25
Cv 4.1
2c
2b
4b
¼" K4-(1/4NPT)-316 ½" K4-(1/2NPT)-316
BV0108F029.2TT1KLK-N
PCV-08F-08F-13-023-V
Catalogue Section 19 Configurator Catalogue Setion 26a Catalogue Section 20
7
8
9
10
11
12
Gauge
Block and Bleed Valves
Pressure Relief Valve
Cylinder Plug Valve
Mechanical Valves
SW Soldo Limit Switch Box Series
o
8a Cv 0.5 8b Cv 0.32 8a
Cv 2.4
Cv 5.1
X5 or X8
NV0308F02M5V6K NV0408F02M5V6K
S12-PR4.5
S12-CPV
Catalogue Section 03
Catalogue Section 26a
Catalogue Section 16
Catalogue Section 14
6
bifold.co.uk
BFD521 November ‘16
Cv 3.9
8b
Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team. When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.
SPR-08-08-M9-32-NU-05-V SPR-08-A08-M9-32-NU-05-V
Catalogue Section 09
Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.
SW0120E-10X23A6
Soldo Controls
is a member of the of companies
© Bifold 2016
½'' - Pneumatic Direct Acting Solenoid (Cv 2.0) - Partial Stroke
Partial Stroke
Schematic
7
4a
4a 7
6a 5
1
8
2
6b 3 4a
6c
4b
1
2
3
4
Filter Regulator
Solenoid Valves (Auto Reset)
Quick Exhaust Valve
Bug Vent / Silencer
Cv 2.6
Cyl to Exh Cv 6.5 Into Cyl Cv 8.3
Cv 2.0
2a
2c
2b
4a
4b
SH12-FR-SR-MD-10-X3
2a FP10P-SI-08-32-NU-V-77A-24D-28LP 2b FP10P-SI-08-32-NU-V-27A-24D-28LP 2c FP10P-S1-A08-32-NU-V-27A-24D-28LP
S19-QEV
¼" K4-(1/4NPT)-316 ½" K4-(1/2NPT)-316
Catalogue Section 13
Catalogue Section 04
Catalogue Section 19
Configurator
5
6
7
8
Gauge
Cylinder Plug Valves
Mechanical Valves
SW Soldo Limit Switch Box Series
¼" Cv 2.1 ½" Cv 5.1 ¾" Cv 9.8
6a
X5 or X8
Catalogue Section 03
bifold.co.uk BFD521 November ‘16
¼" CPV-04F-04F-V
6b
6c
½" S12-CPV ¾" S19-CPV
Catalogue Section 14 Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team. When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.
Cv 0.73
Cv 0.73
7a
BXS-04-04-M13-32-NU-00-V BXS-04-A04-M13-32-NU-00-V
7b
BXS-04-04-M1-32-NU-00-V BXS-04-A04-M1-32-NU-00-V
Catalogue Section 09
Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.
SW0120E-10X23A6
Soldo Controls
is a member of the
7
of companies
© Bifold 2016
¼'' to 2'' - Pneumatic Filter Booster - Circuit
Circuit
Schematic 1
¼'' Simplest / Bare Circuit
7
2
3
4a 12
4c
4a 4b
¼'' Maximum Circuit Options (Non Partial Stroke) 8
8
8 9
TO
TO
5
1
7
2
5
o
6
6
6
11
10
5
6
o
10
10 3
4
4 12
¼'' Logic Line ¼'', ½'', 1'' & 2'' Flow Line
4c
4a 4b
1
2
Filter Regulator
Solenoid Valves (Auto Reset)
Solenoid Valves (Manual Override)
3
4
5
Filter Booster
Bug Vent / Silencer
Ball Valve
o
Cv 0.6
Cv 0.7
2a
SC06-20-FR-SR-MD-10-V-X3
2b
Check Valve
2a
2c
2a FP06P-SI-04-32-NU-V-77A-24D-35 2b FP06P-SI-04-32-NU-V-27A-24D-35 2c FP06P-S1-A04-32-NU-V-27A-24D-35
Catalogue Section 13 6
¼" ½" 1" 2"
2b
¼" ½" 1" 2"
Cv 2.0 Cv 4.0 Cv 11.0 Cv 50.0
2c
Cv 2.1 Cv 4.1 Cv 12.0 Cv 50.0
4a 4b 4c
2a FP06P-SI-04-32-NU-V-77A-24D-ML-30 2b FP06P-SI-04-32-NU-V-27A-24D-ML-30 2c FP06P-S1-A04-32-NU-V-27A-24D-ML-30
Catalogue Section 04
¼" ½" 1" 2"
VBP-04-04-11-V-MD-X4-L115 VBP-08-11-V-MD-X4-L115 VBP-16-11-V-MD-X4-L115 VBP-32-11-V-MD-X4-L115
¼" K4-(1/4NPT)-316 ½" K4-(1/2NPT)-316 1" K4-(1NPT)-316
Catalogue Section 13a
Configurator
¼" ½" 1" 2"
BV0104F025TT1KLK-N BV0108F029.2TT1KLK-N BV0112F0212.5TT1KLK-N BV0116F0215TT1KLK
Catalogue Section 26a
7
8
9
10
11
12
Gauge
Block and Bleed Valves
Pressure Relief Valves
Cylinder Plug Valves
Manual ESD Valves
SW Soldo Limit Switch Box Series
o
¼" Cv 1.2 ½" Cv 4.25 1" Cv 8.6
8a Cv 0.5 8b Cv 0.32 8a
¼" PCV-04F-04F-13-023-V ½" PCV-08F-08F-13-023-V 1" PCV-16F-16F-13-023-V
X10 or X11
Cv 1.5
10a
8b
NV0304F02M5V6K NV0404F02M5V6K
bifold.co.uk
BFD521 November ‘16
Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team. When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.
Cv 0.73
10a
¼" CPV-04F-04F-V ½" S12-CPV 1" S25-CPV
S06-PR4.5
Catalogue Section 20 Catalogue Section 03 Catalogue Section 26a Catalogue Section 16
8
¼" Cv 2.1 ½" Cv 5.1 1" Cv 11.2
BXS-04-04-M9-32-NU-04-V BXS-04-A04-M9-32-NU-04-V
Catalogue Section 14 Catalogue Section 09
Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.
SW0120E-10X23A6
Soldo Controls
is a member of the of companies
© Bifold 2016
¼'' to 2'' - Pneumatic Filter Booster - Partial Stroke
Partial Stroke
Schematic
5
1
2 6a
4a
6
8
7a
4a
4a
3
8 10
9
7b 4b 4b
1
2
Filter Regulator
Solenoid Valves (Auto Reset)
Cv 0.7
2b
SC06-20-FR-SR-MD-10-V-X3
Catalogue Section 13
Catalogue Section 04
6
7
Pressure Relief Valve
Cylinder Plug Valves
7a
BFD521 November ‘16
Filter Booster
Gauge
¼" ½" 1" 2"
¼" CPV-04F-04F-V
Cv 2.0 Cv 4.0 Cv 11.0 Cv 50.0
4a
¼" ½" 1" 2"
¼" ½" 1" 2"
VBP-04-04-11-V-MD-X4-L115 VBP-08-11-V-MD-X4-L115 VBP-16-11-V-MD-X4-L115 VBP-32-11-V-MD-X4-L115
Catalogue Section 13a
K4-(1/4NPT)-316 K4-(1NPT)-316 K4-(2NPT)-316
Cv 0.73
½" S12-CPV ¾" S25-CPV
Catalogue Section 14
Catalogue Section 03
9
10
HIPEX Valve
SW Soldo Limit Switch Box Series
¼" ½" 1" 2"
Cv 0.73
8a
X10 or X11
Configurator
Mechanical Valves
7b
4b
K4-(1/2NPT)-316
8
¼" Cv 2.1 ½" Cv 5.1 1" Cv 11.2
Cv 1.5
bifold.co.uk
5
2c
2a FP06P-SI-04-32-NU-V-77A-24D-35 2b FP06P-SI-04-32-NU-V-27A-24D-35 2c FP06P-S1-A04-32-NU-V-27A-24D-35
Catalogue Section 16
4 Bug Vent / Silencer
Cv 0.6
2a
S06-PR4.5
3
Cv 2.0 Cv 4.0 Cv 11.0 Cv 50.0
8b
BXS-04-04-M13-32-NU-00-V BXS-04-A04-M13-32-NU-00-V
BXS-04-04-M1-32-NU-00-V BXS-04-A04-M1-32-NU-00-V
Catalogue Section 09
Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team. When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.
¼" ½" 1" 2"
HIPEX-04-11-V-E HIPEX-08-11-V-E HIPEX-16-11-V-E HIPEX-32-11-V-E
Catalogue Section 13b
Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.
SW0120E-10X23A6
Soldo Controls
is a member of the
9
of companies
© Bifold 2016
½"- Stacker Modular System - Circuit
Circuit
Schematic
2
2
o
o
8
8
3
3
11
PS
3
11 o
TO 8
TO
TO
4
1
To Roller Cam 3
11
8
From Roller Cam
9
6
7
4
o
10
5
5
1
5
Solenoid Valves (Auto Reset)
3
4
10
2
Filter Regulator
Solenoid Valves (Manual Override)
8
10
3 5
9
11a
3
4
5
6
Bug Vent / Silencer
Ball Valve
Check Valve
Gauge
o
Cv 0.7
Cv 0.6
2a
SH12-20-FR-SR-MD-10-V-X3
2c
2b
2c
2b
2a FP06P-SI-04-32-NU-V-77A-24D-ML-30 2a FP06P-SI-04-32-NU-V-77A-24D-35 2b FP06P-SI-04-32-NU-V-27A-24D-ML-30 2b FP06P-SI-04-32-NU-V-27A-24D-35 FP06P-S1-A04-32-NU-V -27A-24D-35 2c FP06P-S1-A04-32-NU-V-27A-24D-ML-30 2c
Catalogue Section 13
Cv 4.25
½" Cv 4.1
2a
Catalogue Section 04
K4-(1/2NPT)-316
X5 or X8
PCV-08F-08F-13-023-V
BV0108F029.2TT1KLK-N
Configurator Catalogue Section 26a Catalogue Section 20 Catalogue Section 03
7
8
9
10
11
Pilot Valve
Block and Bleed Valves
Pressure Relief Valve
Cylinder Plug Valves
Mechanical Valves o
8a Cv 0.5 8b Cv 0.32 8a
SPR-08-08-P1-32-NU-00-V
Cv 5.1
Cv 1.5
Cv 0.73
8b
NV0308F02M5V6K NV0408F02M5V6K
bifold.co.uk
BFD521 November ‘16
Cv 0.73
11a
S06-PR4.5
BXS-04-04-M3-32-NU-04-V BXS-04-04-M5-32-NU-P1-V BXS-04-A04-M3-32-NU-04-V SPR-08-08-M3-32-NU-04-V BXS-04-04-M5-52-XX-00-V
S12-CPV
Catalogue Section 09 Catalogue Section 26a Catalogue Section 16 Catalogue Section 14
10
o
Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team. When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.
Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.
Catalogue Section 09
is a member of the of companies
© Bifold 2016
Notes
bifold.co.uk BFD521 November ‘16
Accuracy of information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team. When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation and maintenance are the responsibilities of the system designer and user.
Quality Assurance All Bifold products are manufactured to a most stringent QA programme to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.
is a member of the
11
of companies
Š Bifold 2016
Instrument, Process, Directional Control Valves, Pumps and Actuator Electronic Control and Positioning
Accuracy of Information We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products are continually developed and updated so to ensure accurate and up-to-date information please refer to the product catalogue issue list on our web site or contact a member of our sales team.
Bifold, Bifold Fluidpower, Bifold Subsea, Marshalsea Hydraulics and Bifold Orange are all members of the Bifold Group. Registered No. 1787729 in England. Registered Office: Rotork House, Brassmill Lane, Bath, BA1 3JQ.
Quality Assurance All Bifold products are manufactured to a most stringent QA programme. Every care is taken at all stages of manufacture to ensure that every product will give optimum performance and reliability. We are third party certified to BS EN ISO 9001:2008. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request to BS EN 10204 3.1 where available. We reserve the right to make changes to the specifications and design etc., without prior notice.
Bifold Fluidpower Ltd Bifold Group Broadgate, Oldham Broadway Business Park, Chadderton, Greater Manchester, OL9 9XA. UK.
Bifold Orange Unit 7, Cosford Business Park Central Park, Lutterworth Leicestershire LE17 4QU, UK.
Tel: +44 (0) 161 345 4777 Email: marketing@bifold.co.uk Web: bifold.co.uk
Tel: +44 (0) 161 345 4777 Email: marketing@bifold.co.uk Web: bifold.co.uk
Innovative and Reliable Valve Solutions BFD521 November ‘16
Marshalsea Hydraulics Limited Marshalsea House,Venture Way Priorswood Industrial Estate Taunton, Somerset, TA2 8DE. UK. Tel: +44 (0) 1823 331081 Fax: +44 (0) 1823 323382 Email: info@marshalsea.co.uk Web: bifold.co.uk
When selecting a product, the applicable operating system design must be considered to ensure safe use. The products function, material compatibility, adequate ratings, correct installation, operation, and maintenance are the responsibilities of the system designer and user.
USA Office
Singapore Office
Please see the Bifold website, contact us page for the full address. Tel: +1 (713) 304 4012 Fax: +1 (713) 783 0067 Email: marketing@bifold.co.uk Web: bifold.co.uk
Please see the Bifold website, contact us page for the full address. Mobile: +65 98245580 Email: marketing@bifold.co.uk Web: bifold.co.uk
bifold.co.uk Š Bifold 2016