CSS Fat Mag Oct 2013

CATALOGUE SALE

octOBER–NOVEMBER 2013

Local heroes The future of manufacturing in Australia is looking up if we compete on our own terms

Putting the boot in A simple product that can save lives on your site Safe hands Local manufacturer Beaver Brands on exceeding standards Sika and AGM Fasteners case study on making a smarter stadium

FEATURING

250

+

TOP BRAND PRODUCTS!

Contents – FatMag October-November 2013

Dodgy danger – page 22 While tradies and site managers are both responsible for making a building site safe, a jerry-built solution is dangerous because it offers a false sense of security.

Danielle Gusmaroli investigates

2

Manufacturing our own rules – page 12

Building success – page 32

Despite popular opinion that can verge on the negative, experts say the future of manufacturing in Australia is not all doom and gloom.

In fact, if we learn to ignore the price war and compete on our own terms then the picture is a positive one.

For the Canzoneri brothers, success in business is as much about partnerships as experience

Construction Supply Specialists

Safe hands – page 40 Beaver Brands has grown from a local manufacturer to a proactive manufacturer and importer which puts safety and relationships at the heart of everything they do.

Regualr articles Need to know Page 4 The Macsim Sydney to Surfers Bike Ride; and much much more…

Fun pages Page 51 The floating temple; where the Great Wall meets the sea; crosswords, Sudoku and more…

Catalogue Index Abrasives

38 Saint Gobain

Air Tools & Accessories 7 Sidchrome 21 Tridon 31 Nitto 45 KC Tools International 58 Alemlube

Brooms & Squeegees 54 Impact-A

Compressors 9 Peerless Products 59 Colt

Concrete Repair 56 Epirez

Cutting Tools

30 Bordo International 36 Starrett

Diamond Blades

30 34 45 46 47

Hordern & Co Gamer KC Tools International Ox Group Spear & Jackson

38 46

Gorilla Ladders Ox Group

Lasers & Measuring Tools 15 & 21 Apex Tools 18 MCE Lasers Sheffield Blades 24 27 Position Partners 37 Starrett

Fans 44

Tradequip

Fastening Solutions

Materials Handling

4 54 57

Hobson Engineering Mola Bolt Ramset

Fuel Storage 58 Alemlube

Generators 47

Allpower

Grouts

21 Bostik 49 Sika

Grease Guns 58

Alemlube

Hand Tools

7 Stanley Tools 7 Sidchrome 14 Tridon 15 & 21 Apex Tool Group 25 Kincrome

Richmond Wheel & Castors Beaver Ox Group

43

Dymark

25

Kincrome

Silicones, Sealants & Adhesives 17 & 21 Bostik 20 HB Fuller 60 Powers

Kincrome Tradequip

Vacuum Cleaner 44 Tradequip 19

Richmond Wheel & Castors

19

Richmond Wheel & Castors

Wheels & Castors

Dy-Mark Australia

Nailing Tools 59 Senco

Paint

Simpson Strong-Tie Bremick Fasteners

Wheelbarrows

Marker Pens

16 Sekisui

Expansion Foams

34 50

Storage Systems

24 Sheffield Blades 31 Nitto

19 42 46

Dy-Mark Australlia

25 44

Magnetic Drills & Accessories

46 Ox Group 53 Pferd

43

Screws & Screw Systems

Ladders

43

3

Wire Brushes 53 Pferd

Workwear 42 MAK Industrial 55 Impact-A

Pedestal Drills

Power Tools & Accessories 7 DeWalt 11 Hitachi 29 Milwaukee 35 Bosch 39 Makita

Pressure Washers 25 Kincrome 39 Makita 47 Allpower

Pumps 58 Alemlube

Safety Products

10 Paramount Safety 21 & 26 Independent Fastening Systems 21 & 42 Beaver Brands

About us The store listed on the front of this magazine is a member of the Construction Supply Specialist Group. While the majority of your work will be conducted with your local CSS Member, this store is part of a national network of stores that can provide you with exceptional service and support where ever you may be working in Australia. For more store locations, visit www.constructionsupply.com.au.

Notes to the consumer: Some products are subject to plus freight costs where applicable.

Some items may not be stocked in all stores, but can be ordered as required. Prices are valid while stocks last and are subject to change without prior notice. CSS Pty Ltd reserves the right to correct printing errors and omissions. All items include GST.

Construction Supply Specialists Pty Ltd Administration - Head Office 6 Broadfield Rd, Broadmeadows VIC 3047 Tel: (03) 9357 4228 Fax: (03) 9357 4229 admin@constructionsupply.com.au www.constructionsupply.com.au

4

Save 25% on your bolting installation cost.

Ask us how.

AS1252 Structural Assembly

Squirter速 DTI Washer

Bolting made Safe, Easy and Accurate Hobson Structural Assembly.

Squirter速 Direct Tension Indicator Washer.

TONE速 Electric Torque Control Wrench.

Featuring: P 2 x Safety Reaction Arms P L-Shape Arm + Long Bar Arm 230mm P Light Weight P Non Impacting P Low Noise P Automatic Shut-off at Preset Torque

TONE速 Electric Torque Control Wrench Since 1935 ....because quality matters

Need to know Riding for charity Earlier in the year the Sydney to Surfers Charity Bike Ride—sponsored by Macsim Fasteners—raised just over $243,000 for Father Chris Riley’s Youth Off The Streets.

The ride is run by the Rotary Club of Engadine, with Ken Robinson the chief and Kevin Stuart the Ride Secretary.

Youth Off The Streets is a non-denominational community organisation working for young people aged 12-21 who are facing challenges of homelessness, drug and alcohol dependency, exclusion from school, neglect and abuse. Since opening in 1991, has grown from a single food van delivering meals to young homeless people on the streets of Kings Cross to a major youth specific agency offering a full continuum of care through delivery of a wide range of services.

The ride is a fully supported 7-day long ride that starts at Hornsby in Sydney’s north and ends in Southport.

Over the last 15 years of doing the rides, the club has earned over $2.2 million. If you want to find out more about the ride, or how to get involved, go online to http:// www.rotarynews.info/Club4415. 

Struggle street The June quarter 2013 Construction Work ABS data “shows the Australian building industry continues to struggle,” Master Builders Chief Economist Peter Jones said.

“What’s at risk is jobs growth, particularly the ability to retain and employ apprentices,” he said.

The overall value of construction work done fell by 0.3 per cent in the June quarter due to a fall in building work done of 0.6 per cent and a fall in engineering construction of 0.2 per cent seasonally adjusted. The value of work done in the residential building sector fell by 0.1 per cent and the non-residential building sector declined by 1.3 per cent.

“The latest figures confirm anecdotal evidence from Master Builder Association members that poor conditions across the building industry continue,” Mr Jones said.

“The dip in engineering construction reinforces concern about an earlier than expected peak in mining activity while the building sectors continue to struggle despite lower interest rates,” Peter Jones said.

“Both building sectors declined in the June 2013 quarter, confirming a disappointing rate of recovery from distressed levels.”

“The June quarter figures will put further pressure on the Reserve Bank to consider further easing to stimulate the non-mining sectors of the economy to avoid the economy stalling as growth in resources and engineering construction begins to fade,” Peter Jones said.

“But this cannot compensate for a return to sound economic management by the next Australian Government,” Peter Jones said. 

Riders on the Macsim Sydney to Surfers ride raised $243,000 for charity.

Construction Supply Specialists

5

Need to know Industrial sector holding strong Demand for scarce industrial space in the western suburbs of Melbourne and Sydney has sparked interest among speculative builders and developers taking advantage of lower rents, supporting infrastructure and availability of land. Melbourne’s western suburbs have seen rents for warehouse space rise by as much as 10 per cent, providing new spark to the speculative building market with a conservative 30,000 sqm in various stages of construction, according to Savills Australia.

While the rental spike has not yet been significant enough to impact the investment market, Savills says that if the latest activity is sustained across

the board, some increase in investment market activity should be expected towards the end of the quarter.

Sydney’s outer-west also continues to drive growth in the industrial sector, with developers taking advantage of low rents, supporting infrastructure and availability of land.

CBRE’s Q2 2013 Australia Industrial MarketView report found that while hesitation in the marketplace and lending mandates have restricted development projects in recent years, positive activity within the transport and logistics sector would underpin strong supply levels of prime distribution and warehouse assets.

Over the course of 2013, 541,428

sqm of industrial space is expected to be completed in Sydney, with 634,365 sqm due in 2014.

The report shows that Sydney’s industrial market remained balanced for the first half of 2013, with growth in the transport and logistics sector offsetting the decline in manufacturing.

With transport and logistics sentiment and economic drivers set to strengthen, prime rents are expected to see continued—albeit slower— growth in the short to medium term.

The outer central-west enjoyed the highest rental growth over the year to June 2013, with an 8 per cent jump, followed by the central-west and north-west with 2 per cent. 

Office market looking up

6

Construction Supply Specialists

Demand for office space is on the rise, according to Colliers International.

than 215,000 sqm of enquiry during H1 2013. In the Melbourne CBD, there were 158 enquiries for over 132,000 sqm of space.

Colliers International found that professional services were responsible for a large proportion of the activity, with a marked rise in the number of information technology and communication companies looking to relocate (making

up 20 per cent of enquiries).

The report concludes that the office market is set to enter recovery mode by H2 2014 and, with the lack of supply on the market over the short term, it’s unlikely that there will be any more major growth in vacancy rates.

Colliers also predicts the second half of this year will be active, encouraged by an upturn in the United States. 

Source: Property Week

According to Property Week, tenants’ appetite for office space around the country is on the rise, with enquiries up 33 per cent on the same time last year.

The data comes from Colliers International’s latest report. The figures, revealed in Negotiating the Swell: What’s in the Pipeline for CBD Office Tenant Demand, support Colliers’ predictions of a market recovery by 2014, and show that activity in Australia’s office market is strong despite industry concerns about sentiment. In the year to June 2013, Colliers International recorded 1351 enquiries, compared to 1041 for the same period in 2012—an additional 273,989 sqm of office space.

Deal volumes remained relatively consistent, with 263 in the year to June 2013, compared to 272 for the same period last year.

Despite a fall in the total size of office space leased, the number of lease transactions in the first half of 2013 was 4.4 per cent higher than in H1 2012.

Colliers International says that while there has been a lot of “doom and gloom” about the office leasing market, there is still activity and levels of enquiry are positive.

In the Sydney CBD, there were more

DWE357-XE

DW4802

• Key-less lever-action blade clamp with 4-positions • Powerful 1050 Watt motor • Overmolded soft grip on handle and in front boot area

• Bi-Material • 6 Teeth per inch

COMPACT RECIPROCATING SAW

$

D28065-XE

125MM (5”) ANGLE GRINDER

• Ergonomic main handle with rubber grip allows for maximum comfort when grinding for long periods of time • Includes Side Handle, Spanner & Keyless Guard

$

220

PACK OF 5 RECIPROCATING SAW WOOD BLADES

199 00 9

$ 95

00

DCR016-XE

XR RADIO

• Premium sound in the Toughest conditions • Ultra durable cage and shock vibration absorbers deliver extreme protection • Upgraded stereo speaker system provides clearer sound at high volume • Powered by any XR battery to maximise portability

D25712K-XE

7KG 48MM SDS-MAX COMBINATION HAMMER

• Drilling anchor fixing and through holes into concrete and masonry from 12 to 48mm • Core drilling from UP to 125mm • Rotation-stop • Floating handle • Electronic variable speed and impact energy control • Lock-on switch for chipping

NEW!

$

210 00

$

915 00

4900

$

$ SCMTTA-050

FatMax® AntiVibe™ 24oz Claw Hammer

• 75% Larger striking face for a bigger sweet spot • Improved narrower claw • Exclusive dual tempered head rims & claw reduces steel chipping and cracking • Magnetic nail starter for extended reach and one handed nailing capability • Patented Torsion Control - Reduces the damaging twisting rotational force

2900

$

$

290

FatMax® AntiVibe™ 20oz Claw Hammer

• One piece solid forged head for larger sweet spot and better balance • Patented tuning fork design plus 24 torque stabilising bars to reduce shock and vibration travelling up the arm • Magnetic nail starters for hands free use • New soft grip reduces fatigue and allows for multiple holding positions

1900

$

3 Pc Cold Chisel Set

29

$

• 215 x 100mm

1 5 5 00

32 Pce Metric/AF 3/8” Drive Socket Set

00

• Breakaway Torque: 1560ft.lb.

(2115 Nm) • High impact composite housing • Handle forward design for superior balance • Comfortable neoprene grip • 360º swivel air inlet • Protective bumpers • Muffler

SCMT10801

61 Pce 1/2” Drive Metric Socket Set

• 15 metric sockets: 6–22mm • 11 AF sockets: 1/4–7/8” • 2 spark plug sockets • 4 socket accessories

• 18 Metric Sockets: 10 - 32mm, 15 AF Sockets 3/8” - 1-1/4” • Ratchet, extensions, spark plug sockets, breaker bar, uni joint, 1/4”bit holder with 18 bits and driver • Comes in blow moulded case

SCMT10810

$

9 5 00

1 6 5 00

• 10 metric sockets: 4-13mm • 9 AF sockets: 3/16-1/2” • 1/4” drive ratchet with new grip handle • 1 Adjustable offset handle (breaker bar) • Metric ring & open end spanners: 1/4-1/2” • AF ring & open end spanners: 6-13mm • 18 pce screwdriver bit set • Screwdriver extensions: 50, 150mm • T-Handle ratchet screwdriver

SCMT29110

8 Pce Industrial Thru-Tang Screwdriver Set

$

• Set Includes: 3/8” (10mm), 5/8” (16mm), 1/2” (12mm)

All prices include GST

$

SCMT19240

• Slotted: 5x100, 6x150, 8x200, 10x250mm • Phillips®: #1x75, #2x100, #2x150, #3x200mm • High impact cellulose acetate handle • Square chrome vanadium steel blade with magnetic tip

16-298

Brick Chisel

00

SCMT13105

3/4” Drive Impact Tool

• Breakaway Torque: 1260 ft.lb. (1700 Nm) • High impact composite housing • Handle forward design for superior balance • Comfortable neoprene grip • 360º swivel air inlet • Protective bumpers • Muffler

57 Pce 1/4” Drive Metric/AF Socket & Spanner Set $

51-538

16-328

SCMTTA-075

1/2” Drive Impact Tool

51-952

00 0 2 7

3 Pce Sealed Head Ratchet Set • 1/4, 3/8 & 1/2” Drive • Fully Sealed Head • Ergonomic Handle • Maintenance Free

6 9 00

SCMT19120

64 Pce Metric/AF 1/4, 3/8, 1/2” Drive Socket Set 1/4” Drive • Metric Sockets: 4–10mm • AF Sockets: 3/16–3/8” • Socket Accessories 3/8” Drive • Metric Sockets: 10–19mm • AF Sockets: 7/16–3/4” • Spark Plug Sockets • Socket Accessories 1/2” Drive • Metric Sockets: 12–27mm • AF Sockets: 1/2–1” • Socket Accessories

$

2 4 9 00

$

8 5 00

7

Need to know In a spin A solar-powered rotating house, which can complete a 360-degree rotation in ten minutes, has created a stir in Canberra, selling a couple of months ago for $1.2 million.

The house, which rotates on castors supplied by CSS supplier Richmond Castors, has generated a lot of press for its eco-credentials, and the fact that it spins around in a circle on twenty-eight wheels. The home, named Girasole (which means ‘follow the sun’) was built by John Andriolo of MAG Constructions, following what he described in some papers as a “lifelong dream”.

The four bedroom home is powered by solar panels on the roof, and is spun (gently) by the use of a touch-screen panel inside.

John Andriolo told a newspaper, “Girasole will encourage a change in thinking away from needing to find perfectly oriented blocks and will demonstrate that even the most ambitious undertakings can be seen as a prototype for future environmentally friendly homes.”

The designer, Peter McCabe, told the same paper the rotation mechanism uses minimal energy, due to the lack of lifting involved in the process. ‘’We think it’s about 100 watts, which is about the same as a bright light bulb.’’

Rotating homes were likely to remain a niche market, however the eco-friendly design could inspire other projects. ‘’It’s never going to be the main type of houses people design, but it has its benefits.’’

The home is on a 704-metre block in the Canberra suburb of Crace. 

8

Two views of the revolving house in Canberra: during and after construction.

CUSTOM ENGINEERING SOLUTIONS

55 ye

ars

RICHMOND WHEEL & CASTOR CO

9

we are air... $1,149.00

P17 Electric Belt Drive Compressor (00087) Free Air Delivery @ 100PSI 320LPM 3.25HP, single phase – 15Amp motor Pump RPM: 963 Amps Draw: 13 Max PSI: 145 55 litre air receiver HUGE 5 Year Pump & 1 Year Motor Warranty

$815.00

Compact Gun Runner Direct Drive Oil-less Compressor (00077) Compact Gun Runner Direct Drive • Free air delivery @ 100PSI: Oil-less Compressor (00077) 175LPM; 2HP Single phase –7 Free air delivery @ 100PSI: 175LPM amp;2HP 17 litre air phase receiver tank; Single – 7Amp Pump 17 RPM: litre1400 air receiver tank Warranty: 1 Pump year total RPM:unit 1400 Warranty: 1 year total unit

$138.00

Air operated Auto Drain Kit (00254) Automatic removal of condensation from air receiver tank every time air compressor is unloaded. Can be adapted to any model compressor.

$ 155.00

30 Metre Retractable Air Hose Reel (00347) 30 Metre 3/8” 10mm air hose with ¼” BSP fittings. New patented stop anywhere locking system. Self-levelling to ensure easy rewind of hose. 180 degrees mounting bracket complete with 4 sleeve anchors. 2 metre input hose largest retractable reel on the market.

$255.00

Compact 2500 Electric Direct Drive (00332) Free Air Delivery @ 100PSI: 154LPM 2.5HP, single phase – 10Amp motor Pump RPM: 2850 30 litre air receiver Amps Draw: 8 Max PSI: 145 Designed for handyman use Warranty: 1 year total unit

$1,100.00

P14 Electric Belt Driven Compressor (00257) Free Air Delivery @ 100PSI 275LPM 2.75HP, single phase – 10Amp motor Pump RPM: 852 Amps Draw: 9.4 Max PSI: 125 55 litre air receiver HUGE 5 Year Pump & 1 Year Motor Warranty

$769.00

Compact 5000 Electric Belt Drive Compressor (00334) Free Air Delivery @ 100PSI: 235LPM 2.5HP, single phase – 10Amp motor 40 litre air receiver tank Amps Draw: 9 Max PSI: 145 Pump RPM: 1160 Warranty: 3 year pump, 1 year motor

$2,069.00

PV25 Industrial 3 Phase Compressor (00555) Free Air Delivery @ 100PSI: 545LPM 5.5HP 3 phase motor Pump RPM: 1154 2 cylinder, slow revving, cast iron pump Amps Draw: 6.6 110 litre air receiver Max PSI: 145 Warranty: 3 Year Pump, 1 Year Motor All prices include GST

Need to know The pay problem Master Builders Australia says the hopes of thousands of young people seeking jobs in the building and construction industry were dashed by the Fair Work Commission’s decision to effectively raise the pay of first and second year trade apprentices by 20 per cent.

“The Fair Work Commission’s decision will lock thousands of young Australians out of rewarding careers in an industry crying out for more skilled workers over the next decade,” Master Builders Chief Executive Officer Wilhelm Harnisch said.

“It must be remembered that apprentices are being paid to attain a qualification,” he said. “The Commission’s decision will simply price many apprentices out of what is already a tight job market and at a time when the building and construction is struggling and less able to afford to take them on.”

“Unions such as the CFMEU have lost touch with reality when they denigrate 457 visa workers because they want more employment for Australian workers but pursue a wage claim that will lock thousands of young Australians out of vocational training and a rewarding career,” Mr Harnisch said. 

10

Makes 20L

Australian Made for Extreme Conditions

DC20 THORZT 20L Drink Cooler

LC20LL

THORZT 1.25 Litre Liquid Concentrate Electrolyte thirst aid formulated rehydration makes 20 litres.

(Lemon lime flavour. Also available in orange, tropical, wild berry and blue lemonade.)

$88.00 INC. GST

$27.45 INC. GST

AS/NZS 1801 Lic 20500

AS/NZS 1716 Lic 1508

SH

HHV9

EN 388

V9 Vented Hard Hat. Straw Hat. Light and durable sun protection. White, yellow, orange, red, 4131 green, blue, fluro yellow, Sizes M-XL. black and fluro watermelon NPF STINGA® nylon glove with INC. GST INC. GST PVC foam grip. Bare hand Feel Technology. Size 7-11

$8.80

$14.25

FSPG

FilterSpec PRO Goggle / Mask Combo. Goggle & mask both certified to ASNZS.

$27.50 INC. GST

$3.85 / pair INC. GST

AS/NZS 1270:2001 Lic 25293

HMA1P2-B

EMPYT

Tradies and Painter’s kits.

Storage bucket contains half mask and A1P2 cartridges with pre-filters.

PYTHON earmuffs. Class 5, 31dB(A). Paded headband means superb comfort.

$49.50 / pack INC. GST

rom f s l ia c e p S y t e Knockout Saf

$28.55 / pair INC. GST

.au .com tools ower For conditions itachi-p of warranty visit www.h

11

*3 Year Warranty does not apply to bit sets

KC18DDL

All prices include GST

WH18DDL(HW) 18V IP56 Water & Dust proof Impact Driver 172Nm Torque

Pack includes: DV18DBL 18V Impact (Hammer) Driver Drill, WH18DDL 18V IP56 Impact Driver 172Nm Torque

$ 595

*Also available NAKED WH18DDL(H4)

WF18DSL(HW) 18V Slide Automatic Screw Driver

$ 645 KC18DGDL D 3R Pack includes: ONUS RY B TE DV18DSDL BAT WH18DSDL G18DSL

KC18DSVL

*Also available NAKED WF18DSL(H4)

WR18DSHL(HW) 18V Slide High Torque Impact Wrench

Pack includes: DV18DSFL WH18DSDL

$729

$ 360

$ 645

$ 729

*Also available NAKED WR18DSHL(H4)

WR18DSDL(H4)

DH36DAL(HL)

G13SR3-BP

18V Slide Impact Wrench

36V 3 Mode Rotory Hammer

730W, 125mm, Angle Grinder with accessories & carry case

$ 195

*Also available as a set

FCJ65V3

$899 DV18V

GP5V(H1)

400W 65mm D-Handle Jig Saw

50mm 760W Variable Speed Die Grinder

CG22EAB(HC)

$220

690W, 18mm Impact Drill with Keyless Chuck

$ 345

$ 105 21.1cc Bent Shaft Grass Trimmer

$ 110

*Also available NAKED DH36DAL(H4)

$ 169

728698

728699

NT65MA4(H2)

18 PIECE HI-TORQ BIT SET

35 PIECE HI-TORQ BIT SET

65mm DA-series Finish nailer

$ 22

$ 39

$ 360

Cover story

Manufacturing

our own rules Despite popular opinion that can verge on the negative, experts say the future of manufacturing in Australia is not all doom and gloom. In fact, if we learn to ignore the price war and instead compete on our own terms then the picture is a positive one. By Chris Sheedy

“A

business in any industry that attempts to compete on price alone is doomed,” says Steve Sammartino, Marketing lecturer at Melbourne University.

“Now that we’re no longer geographically isolated in a business sense and potential customers in any field can shop internationally, we can’t possibly take on the world’s biggest organisations on price alone. But if you’re able to differentiate your product or your service and build it with the needs of specific markets in mind, if you can customise it for the people in your region or for individual client organisations, then you’re able to offer something the big producers cannot.”

Sammartino is on the Advisory Board of a new manufacturing company in Australia which, believe it or not, makes cars. But Tomcar Australia does not mass produce lines of automobiles in competition with other major automotive brands. Instead it builds an entirely new category of off-road vehicle that is specifically designed for the military, mining, rural and tourism

12

Construction Supply Specialists

industries. “It is made right here in Melbourne and will very soon be an exemplar of manufacturing 2.0 in this country,” Sammartino, also the author of popular business blog startupblog.wordpress.com, says. “It’s differentiated, built for specific needs, unique, not price oriented. Even the way the car is being retailed is non traditional.”

Along those same lines, Dr Swee Mak, Director of the Future Manufacturing Flagship at the CSIRO, wrote in Business Spectator that over the next ten years, “success factors that will influence the competitiveness of Australian manufacturing firms will include the need for faster discovery and development to respond more quickly to dynamic markets, advanced design to create much more competitive and sustainable products, improved collaboration across our innovation system to maximise the exchange and transfer of knowledge, an increase in our ability to leverage our national broadband infrastructure, and encouraging a better understanding of supply chains. Another key success factor will be our ability to develop, adapt, adopt and integrate the right enabling technologies that provide a competitive advantage for Australian manufacturing firms.”

The production line at Apex Tool Group plant at Albury, NSW.

Construction Supply Specialists

13

Cover story

Fortunately many of our leading manufacturing organisations are taking up Mak’s challenge, much to the benefit of their clients.

What Our Manufacturers Say Michel Marcellin, Managing Director of Bostik Australia, says that even before the manufacturing process begins it’s important that the manufacturers’ scien-

tists are in the same environment as the consumers, facing the customers and communicating with them.

“The people who create our products know the needs of our customers. They understand how the consumers are going to use the products,” Marcellin says. “We’re able to fine-tune and innovate before the product even hits the manufacturing line. Our product quality

14

is also driven by rules and certifications, and our company is often a part of the consultation process in developing those guidelines.”

There are practical advantages to

METRINCH MEANS FEWER TOOLS

UNIQUE PATENTED DESIGN

l Each metrinch tool can be used for

l The drive profile grips from the flats on a nut or bolt, not the corners

both metric and inch, plus damaged nuts and bolts

DESIGNED TO FIT METRIC AND INCH

Manufacturers such as Bostik (above, left) and Apex Tools (above) respond to the clients they work closely with.

l The 4 point grip design enables Metrinch

l No need to switch back and forth

ONE TOOL SET IS ALL YOU NEED!

from imperial to metric

Combination Spanner Set

SPECIAL

MORE TORQUE LESS WEAR l Metrinch grips more securely than conventional sockets as

sockets and spanners to fit multiple

pressure is exerted evenly

sizes and damaged or rounded nuts

through the walls

$85.0

0

Part No. MET-0125

14 piece set equals a 45 • This piece conventional set Metric 8-19mm; SAE • Fits 5/16–29/32 “

Socket & Spanner Set 1/4” & 3/8” Drive Part No. MET-0300

25 piece set equals a 53 piece • This conventional set • Fits Metric 5-22mm; SAE 3/16–7/8 “

Standard Socket Set 3/8” Drive SPECIAL

$99

.50

Part No. MET-0320

SPECIAL 12 piece set equals a 36 piece conventional set • This 5 • Fits Metric 10-22mm; SAE 3/8–7/8 “ $29.9

SPECIAL

Socket & Spanner Set 1/4”, 3/8” & 1/2” Drive Part No. MET-0650

50 piece set equals a 124 piece • This conventional set Fits Metric 5-32mm; SAE 3/16–1 1/4 “ •

0314-13_Metrinch_1-2PG_Ads.indd 1

Socket & Spanner Set 1/2” Drive SPECIAL

Standard Impact Socket Set 1/2” Drive Part No. MET-2400

$199 30 piece set equals an • This 88 piece conventional set Metric 10-32mm; SAE • Fits 3/8–1 1/4 “ Part No. MET-0450

.50

• •

This 15 piece set equals an 42 piece conventional set Fits Metric 11-25mm; SAE 7/16–1 “

SPECIAL

.95 $109

0314/13

.50 $249

All prices include GST

23/08/13 3:24 PM

15

$44.00 $49.00

$39.00 $44.00

$35.00 $44.00

$49.00

$289.00 $22.00

$449.00

$38.00 $45.00 $65.00

$230.00 $85.00

$189.00

All prices include GST

Cover story

being local too, Marcellin says. Not only is Bostik confident in the supply and quality of the chemicals they need to produce specific items for consumers, but the ‘freshness’ of those chemicals is also important.

“Every chemical has a shelf life,”

“We have 55 years experience in manufacturing wheels for industry. We offer design, concept and the total manufacturing package under one roof.”

Steve Harty, Richmond Wheel and Castor Co’s Marketing and Business Development Manager.

Marcellin explains. “If you import the product then it can be six months old by the time it hits the shelves in Australia.

We guarantee a fresh product made to local specifications.”

Paul Cox, Market Manager of Sekisui

Foam Australia, agrees that there is great benefit for clients in dealing with a local manufacturer. His company manufactures closed-cell foam products for several sectors of the market including the building industry, the automotive industry and even for surf products such as boogie boards.

“We’re able to produce the exact product that a client needs, in a timely fashion,” Cox says. “If the standard foam product is 10mm in thickness but a project needs 30mm or 50mm, we can offer that with a quick turnaround time. It saves the project manager having to cut corners with solutions cobbled together from off-the-shelf products.”

“At the same time there’s a guarantee of quality. And if there happens to be an issue with anything we have produced then it can be addressed and rectified on the spot. If necessary we’ll do a site visit to help figure out what’s going wrong before we provide a fix. You’re not going to get that quality, service and

Benefits

A

All SOF-FORM Products

SO per cos

peace of mind when you go with cheaper, imported choices.” TM

Continuous Rolls Client Choice A unique one piece extruded foam with no laminations joins Theorhealth and survival of the AustralianClosed manufacturing industry isn’t just Cell Non absorbent and impervious to most liquids important for the manufacturers, it’s alsoCrosslinked vital for the many industries that Superior compression and recovery properties, relyvital ontothem.

If Richmond Wheel and ensure a good joint filler Castor Co didn’t exist, for instance, or • Excellent weatherability and resistance to ultra violet light Highly resistant to temperature, acids, alkalis, if it • was busy obsessing over keeping oils and solvents their prices below anything China could Variety Sizes offer, thenofthe Gorgon civil and underAvailable in 25 metre rolls in 10mm thickness ground services project, located on • Standard stock widths are 50mm, 75mm, 100mm, 125mm, 150mm, 200mm, 250mmhave and 300mm Barrow Island, would been left with • Thicker sizes are available from 15mm to 100mm, 15mm a serious problem. to 30mm in rolls with the 40mm to 100mm in sheet form As Australia’s largest natural gas projin 2400mm sheets ect, the capacity of Gorgon demands expertise in pipeline TM and LNG handling.

ForReduces this, project managers brought in job time Supplied with one-sided Acrylic Adhesive Richmond Wheel and Castor Cofortofaster installation fabricate specially designed low profile Easy torollers Use to handle HDPE pipe up pipeline Light, flexible and easily cut and fabricated on site with a to two metres The rollers sharp knife Plus in it isdiameter. zipped for easy on site clear offallowed complete lengths to be spooled— Very Clean

SOF-FORM Adhesive

Will not bleed, mark and effect other prodcuts during storage

To

Pro

Wid

La

Eas

Da

Eas

Lig

Ver

To

Av

SO

Sa

Non or s

Ea

Lig

Op

Can and

Sp

Can with

SOF- FORMTM Zip T

16

SO pro • • • •

Self-wound Expansion Joint Filler Contact us for all your Foam needs RTA compliant

Contact your nearest CSS outlet for details and availability on all of our other foam products.

Refer to the front page of the Fat Mag for your nearest store location.

Benefits: Sekisui Foam Australia is the leading Australian manufacturer of crosslinked polyolefin foams. We have been manufacturing in Sydney since the 1970’s.

Easy-Seal Void Filler

• Australian designed and manufactured • Paperless no release liner • Easy to install • Easy to transport

Roll Size: 10mm x 25m 8 standard widths of 50, 75, 100, 125, 150, 200, 250 and 300mm.

Closed Cell Backer Rod

Purlin Tape

BOSTIK XTREME FIX USED IN THE LEGACY WAY TUNNEL

Legacy Way Tunnel Ring Sectors, 38,700 pre-cast elements with bonded EPDM Gasket fixed with Bostik Xtreme Fix -16,000 cartridges

Bostik has provided a superior bonding solution to the complex and demanding needs of the Legacy Way Tunnel Project in Queensland.

The Legacy Way Tunnel Project required a reliable, high-quality, economical product that cured under reasonable time frames. Bostik Xtreme Fix was selected due it’s high performance qualities in combination with factors such as economy and Bostik’s local presence.

The Legacy Way Tunnel stretches around 4.6km connecting the Western Freeway at Toowong with the Inner City Bypass at Kelvin Grove. The project consisted of an intergrated team of three principals including, BMD Constructions, Ghella and Acciona.

The tunnel was fabricated using two tunnel boring machines (TBM’s) that were 12.4m in diameter and 110m in length - the tunnel ring was placed as the TBM’s progressed. Each ring consisted of nine precasted elements. The perimeter of each had an EPDM gasket bonded with sealant. More than 4,300 rings and a total of 120,000m³ of concrete were used.

After trialing a range of products, the client saw Bostik Xtreme Fix as best suited to the project. “We trialled two adhesives prior to receiving Bostik Xtreme Fix,” stated lead engineer Ignacio Sanz, “Bostik Xtreme Fix was by far the best.

There is no special respiratory equipment required during use, it does not attack the EPDM and cures dry. It’s the best adhesive for this job”. In total the EPDM gasket was bonded using 16,000 Bostik Xtreme Fix cartridges.

Due to it’s continued investment in research and Development, local R&D teams are constantly working to ensure products are world class and still relevant to the Australian context. They do this by continually testing new technologies to develop new ranges of products.

Clearly evident in this project, Bostik has the capacity to supply high quality products to large, demanding Projects.

BOSTIK XTREME RANGE XTREME FIX

XTREME SEAL & FIX

Xtreme Fix is a high performance adhesive that grabs instantly to most surfaces.

Xtreme Seal & Fix is a high performance flexible sealant and high strength adhesive in one. It cures to form a permanent, flexible seal and tough bond.

Recommended Uses Suitable for most construction materials including damp surfaces & underwater.

Features & Benefits • Superior strength grab adhesive • Permanent flexible bond • Low VOC • Interior & exterior applications Product Name Xtreme Fix

Item Number 371327

Colour White

Size 290ml Cartridge

Recommended Uses: Suitable for exterior & interior application and for most construction materials.

Features & Benefits • Fast drying • High bond strength • One part-no mixing required Product Name Xtreme Seal & Fix

Item Number 371335

To order, contact your local CSS member, refer to front page for further details.

Colour White

Size 290ml Cartridge

17

Cover story

in some instances up to 80 metre spools—with the welder stationed in one position. This improved productivity and eliminated costly handling issues and other potential obstacles.

“We have 55 years experience in manufacturing wheels for industry,” says Steve Harty, Richmond Wheel and Castor Co’s Marketing and Business Development Manager. “We offer design, concept and the total manufacturing package under one roof. We have the ability to draw on previous designs for custom work and thanks to stock holdings in all Australian cities the time frames are always minimal. Quick turn around times from an innovative manufacturer, including alternative concepts for tooling and mould making, keep costs at a minimum. Importantly, the intellectual property for custom designs remains with the client.”

Also important from the customer point of view is the fact that they get to know the product more intimately

18

Case study Sean Kreskay, Sales Manager for Epirez Construction Chemicals, one of the brands belonging to ITW Polymers & Fluids, talks us through the challenges and benefits of being an Australian manufacturer.

“Manufacturing in Australia is costly but is desirable for Epirez. As an Australian manufacturer we can control the entire process of concept to actual product. We have input and ownership of the R&D, raw material sourcing, manufacturing, packaging and after-sales support. This all combines to create a great local product.

By manufacturing in Australia, we can customise according to our customers’ needs and schedules.

We can react better as we are not locked into another party’s long term plans and schedules.

All of our finished product is made in Australia. A very small percentage of our raw materials can only be sourced from overseas suppliers, and even then we only source the very highest quality. The quality of the final product is the reason our customers come back to us again and again. Australian-made products are known for their quality - deep down people know they’re getting a quality product.

If you buy an offshore product the ownership and responsibility is ultimately diluted and vague. But as an Australian manufacturer, the only way you’ll survive is by offering the very best all-around quality and service. That’s good for the client and good for the manufacturer, too. We want to make sure everything goes smoothly and we’re just as interested in the success of the job as the client is.”

All prices include GST

LS.RH.K1

$1,199

Inc.GST

BUILDERS LASER LEVEL KIT Auto horizontal laser level Australian made 500 m diameter working range Also available in horizontal/vertical (model code: LS.RHV.K2)

$2,475

Inc.GST

$935

Inc.GST

TPL.1N.K1

LS4V4H.K

Auto horizontal/single grade laser level Large easy to read LCD Easy input of grade up to +/- 10% 500 m diameter working range

Servo motor self-levelling 9 separate laser beams giving 360 degree level lines Perfect all-rounder for construction

SINGLE GRADE LASER LEVEL KIT

MULTI LINE LASER KIT

ALIGNMENT AND LEVELLING SOLUTIONS FOR ALL APPLICATIONS

RICHMOND WHEEL & CASTOR CO

WHEELS & DEALS HEAVY INDUSTRIAL SERIES CASTOR

HEAVY INDUSTRIAL SERIES CASTOR

RUBBER TYRED CAST IRON WHEEL

RUBBER TYRED CAST IRON WHEEL

125mm WHEEL DIAMETER

125mm WHEEL DIAMETER

180KG CAPACITY

180KG CAPACITY

CODE: S5200

$22.00

CODE: S5200B

$39.00

LIGHT INDUSTRIAL SERIES CASTOR

LIGHT INDUSTRIAL SERIES CASTOR

REBOUND RUBBER WHEEL

REBOUND RUBBER WHEEL

100mm WHEEL DIAMETER

100mm WHEEL DIAMETER

100KG CAPACITY

100KG CAPACITY

CODE: S4404

$19.00

CODE: S4404B

PUNCTURE PROOF WHEEL

PUNCTURE PROOF WHEEL

400mm DIAMETER

255mm DIAMETER

93mm TYRE WIDTH

83mm TYRE WIDTH

76mm BOSS WIDTH

60mm BOSS WIDTH

1” AXLE DIAMETER

3/4” AXLE DIAMETER

4.80/4.00-8 TYRE SIZE

4.10/3.50-4 TYRE SIZE

200KG CAPACITY

100KG CAPACITY

CODE: PF1632-1

$70.00

CODE: PF1084

MIGHTY TOUGH HAND TROLLEY

SAFETY STEP

1180x370mm TROLLEY SIZE

510mm(L) x 370mm(H)

350mm(W)x280mm(L) TOE PLATE SIZE

150KG CAPACITY

$29.00

$35.00

CODE: LDR01

410x3.50x4 TYRE SIZE 300KG CAPACITY CODE: HTR101

$125.00

$65.00 WHEELBARROW 100L TRAY VOLUME 200KG CAPACITY 16x6.50-8 TYRE SIZE CODE: WBR020

$125.00

All prices include GST

19

Cover story

when they have some form of involvement with the manufacturing process or with the people involved in that process. Damian Callinan, Operations Manager of Tridon Australia, says this knowledge can help a business to both manage a project and to save money along the way.

“When customers see it happen and speak with the people who manage the process they definitely develop a better understanding of the manufacturing process,” Callinan says. “That can be very valuable for them. It helps customers to better understand how products can be customised and what is possible. And should there ever be a particular requirement, it helps both of us work out a solution.”

Tested For Australian Conditions Local manufacture can mean a great deal for products used in an environment as unforgiving as Australia’s.

Peter Smith, Marketing Manager of

20

Apex Tool Group which manufactures Lufkin Tapes in Albury, NSW, says the company’s tapes are the tradesman’s choice because they’ve been relentlessly tested to meet the rigorous needs of the Australian working environment.

Such tests include the ‘falling sand test’, during which the blade is subject to sand falling on it from a specified height for a specified time to test the durability of the coating covering the tape markings, the ‘drop test’, when a tape is dropped from a significant height onto all its faces and must be fully functional after the test, and the ‘blade retraction test’, during which the full length of the blade is pulled out of the tape thousands of times and released at full speed to test the end-hook, bump stop and blade.

“When people buy from us they have a guarantee of quality,” Smith says.

“We’re easy to contact, we’re answerable for anything that might go wrong and we actually want to know if there

HBF 260 300g

Heat Resistant RTV Silicone

HBF 300 300g

Premium grade Neutral Cure Silicone

are any problems. Our Australian-made products have a lifetime warranty.”

Considering the quality control processes, personalised service, innovative practices, problem solving abilities, opportunities to customise for specific purpose, lifetime warranties and the many more benefits offered by local manufacturers, it seems surprising that an imported product—one that has been made to a price and shipped half way around the world to undercut locally manufactured products—can compete at all.

There are plenty of ways in which Australian manufacturers can and do take on the overseas players. It will always be an ever-changing game of innovation, technological advancement, research and development as the foreign competition ramp up their own customisation programs. But as long as the locals stay one step ahead then there is little reason for anything but confidence in our manufacturing industry.” 

HBF 620 300g

High Performance glazing Silicone

7057194189 - Red

7071884042 - black

7056094221 - Trans

“A heat resistant RTV (Room Temperature Vulcanising acetic cure silicone specially formulated to be used for a variety of industrial bonding and sealing applications and can withstand intermittent temperatures of up to 312ºC and continuous temperatures of 260 ºC.

7071874042 - White

A premium grade, acetic cure glazing silicone for use in glazing, and other glass bonding and sealing applications.

HBF 620 is a high modulus product that offers increased tensile strength compared to standard silicones.

HBF 660 300g

High Performance Silicone Sealant

7359764286 - Trans 7071864042 - Grey A neutral cure, premium grade, silicone sealant specially formulated for use in glazing and industrial fabrication where a premium quality, non-corrosive sealant is required, which skins quickly and is easy to use.

HBF 730 300g

RTV Adhesive Sealant Silicone

TOOL BOX 400g

MS Adhesive & Sealant

7060924164 - black

7056094164 - trans

7029774250 - Grey

7060914164 - Trans

7056104164 - black

7029764250 - White

A high modulus, premium grade, neutral cure silicone sealant for a wide range of industrial, glazing, cladding, automotive and assembly applications.

HBF 660 High Performance Silicone Sealant has extra high body reducing the risk of slumping when used on sloping surfaces, and exhibits superior adhesion on a wide range of surfaces.

A multi purpose, one component RTV (Room Temperature Vulcanising) silicone used for general industrial sealing and bonding. HBF 730 forms a tough rubber like film that outperforms standard grade silicones.

Acetic cure and is UV, vibration and temperature resistant.

7063564250 - black An MS polymer, moisture curing adhesive and sealant in one, providing 101 uses for the home & trade environment to adhere and seal virtually any substrate.

Tool Box is a solvent free adhesive and sealant that provides rapid skinning and curing, plus a high bond strength that grabs fast first time.

21

Sika Ceram Self Leveller 20kg High performance, self-levelling underlayment for levelling interior and exterior floor prior to application of tiles, vinyl, carpet, parquetry and timber flooring.

• Fast Setting • Interior / Exterior • Installation of floor coverings possible after 18 hours • Levels up to 15mm

Sof-Form Pipe • The new Advanced Pipe Lagging • Quick and Easy to install • Standard roll length of 6 metres • Standard ID’s of 114 and 120mm, others available • Available in rolls from 2 metres to 100 metres on request

Universal Plier with crimper 200mm

Clamp Pack

• Premium Quality forged alloy steel for toughness and durability • Insulated grips • Precise jaw gap for wire work • Cross hatch jaws for positive grip • Serrated pipe grip • High Voltage 1000V Model (Orange grips 3800CHV) also available

• Perforated band clamp, all stainless for corrosion protection • Assorted sizes to suit a variety of applications, 82 clamps in total • Handy carry case provides one compact storage location • Pack clearly marked with size range

3800CTV

Ezy-Read Tape Measure 8m x 25mm

Firecaulk

• Ezy-Read tapeline. Each numeral on tape is totally distinct from other numbers • Perfect for measuring applications where the tape is directly away from the operator • Compatible with either left or right handed operation.

• Firecaulk is a single component non-sag, fire rated, acrylic based sealant used for construction joints.

• Suitable for interior applications with brick work & block work, fibre cement sheet, aluminium, windows, granite sandstone and marble.

• Fire rated up to 4 hours, Firecaulk is very easy to apply and gives a smooth finish.

ELW148SI10

Sunscreen

Flowfill Panel Grout

• Broad spectrum UVA & UVB sunscreen

• General purpose, non-shrink (Class A), cementitious grout with enhanced working life. Ideal for pre-cast and tilt panel work.

• Ready to use, pre-mixed, and requires only the addition of water.

• Can be mixed for stiff, plastic, flowable or fluid application.

• 4 Hours water resistance • Very high protection • Contains Aloe Vera & Vitamin E • Suitable for people involved in all types of outdoor activities

Hard Hat • TUFFGARD is designed, developed and manufactured entirely in Australia.

• AS/NZS 1801:1997 certified • Available in Polycarbonate or A.B.S. (Vented and Non Vented) • The TUFFGARD Helmet takes 25 and 30mm accessories (cap attachable earmuffs, visor holder, etc.)

• Adjustable 6 point webbed harness for comfort and fit • Extra strong and robust yet lightweight, ideal for all working conditions • Rain guard with reinforced peak • Wide colour range available with logo printing

Safety Boot • A re-usable, cost effective base for constructing freestanding temporary guardrails.

• Complies with requirements of AS4994.1 & AS4994.3 • Can be used on most base materials • Easy set up and take down

Workplace safety

Dodgy danger While tradies and site managers are both responsible for making a building site safe, a jerry-built solution is dangerous because it offers a false sense of security. Danielle Gusmaroli investigates

A

young workman is toiling in the searing Australian heat on the rooftop of a two-storey house. Behind him, a makeshift net covers the void where the stairwell will eventually be built.

The radio is playing in the background.

He is installing roof trusses wet from earlier rain but lifts two that are laminated together and suddenly loses his grip, collapsing backwards into the stairwell void.

The terrified 26-year-old crashes four metres from the rafters to the landing below, breaking three vertebrae. He also suffered a punctured lung, broken ribs, a fractured wrist and head wound.

This harrowing scene in Keysborough, Victoria, is every construction worker’s nightmare. It left the young man so horribly injured he is now a paraplegic and relies on a wheelchair for mobility.

Contractor Mayneline Pty Ltd was dragged into court by the government heath and safety regulator WorkSafe and fined $60,000 in 2010. Fall protection had not been erected, and the workman had tumbled straight through the makeshift net above the stairwell.

Johns Lyng Insurance Building Solutions Pty Ltd, the main contractor on the site, pleaded guilty in Dandenong Magistrates’ Court to one charge under the Occupational Health and Safety Act 2004.

At the time of the incident WorkSafe expressed frustration that its calls for the elimination of temporary safety measures and for improved practices within construction had largely fallen on deaf ears.

WorkSafe’s general manager for health and safety, Lisa Sturzenegger, said: “It is enormously frustrating that

22

Construction Supply Specialists

Above: Products such as the IFS Safety Boot are a logical and easy way to address the problem of self-assembled safety fences.

this essential part of construction work must still be a focus of WorkSafe’s compliance and enforcement activity.”

The young victim is one of around 40 workmen who die on construction sites across Australia annually, among an estimated one million workers employed.

Over the last seven years, the death rate has fallen, albeit gradually, from around 50 to 40, according to the national policy-making body Safe Work Australia’ s latest Comparative Performance Monitoring Report (October 2012).

Yet construction site deaths, recorded from 2003-2010, represent roughly dou-

ble those of all other recorded work-related fatalities across all industries, including the blue collar sector.

Last March a 54-year-old worker was killed in a fall from scaffold at a site on the corner of Pitt and Campbell Street in Sydney’s CBD. Days later, a 17-year-old suffered severe head injuries and died after he was struck by a falling excavator bucket in Sydney’s south-west.

The construction union CFMEU NSW Secretary Brian Parker sent its members’ sincere condolences to the family and friends of the workers saying: “No one should ever have to die as a result

“It’s extremely concerning, I’d say 50 per cent of the accidents and injuries in the construction industry are either not reported or massively under-reported.”

Dean Hall from the CFMEU

of accidents or unsafe practises at the workplace.”

While the gap for all work-related fatalities between Australia and the better performing countries has fallen, Australia today remains seventh place after Finland, Denmark, Sweden, UK, Norway, and Switzerland.

The major Australian building and construction industry association Master Builders (MBA)—which represents 31,000 building firms and contractors—

says the fall in workplace accidents is due to increased literature and government regulations aimed at clamping down on unsafe or do-it-yourself work practices, and on firms which do not enforce statutory health and safety regulations.

In 2010–11 more than 140, 000 workplace interventions were undertaken by work health and safety authorities around Australia. Authorities issued 57,600 notices made up of 970 infringe-

ment notices, 5,292 prohibition notices and 51,349 improvement notices.

The MBA views controlling the hazard of makeshift safety measures, such as in the case of the worker who fell down the stairwell, or as a result of erecting a temporary fence at the edge of a top slab, as integral to the construction task itself.

Its national director Richard Calver said: “Any death within any industry is bad news. Falls from height is a serious hazard in the construction industry equating to 25 per cent of all construction fatalities and 26 per cent of serious workers compensation claims—where the injured worker was required to take one or more weeks off work.

Construction Supply Specialists

23

Workplace safety

“A person conducting a business or undertaking has a duty of care to provide, so far as is reasonably practicable, a work environment without risks to health and safety as well as safe systems of work. Temporary safety measures have been practised for years and will continue to be.”

The construction union, CFMEU,

inspectors come out to investigate it, they’ll find massive systematic problems in the workplace.

“It’s actually a plague in the construction industry at the moment and we’re going to target it,” he said.

Contrary to the belief that it is the employer’s responsibility to ensure safe work practices, the Work Health and Safety Act 2011 states the charge also falls on the shoulders of the employee.

Safe Work established two codes of practice approved by the Government in 2011 to guide companies to meet work health and safety duties of care by identifying fall hazards, assessing risk and implementing controls.

These two codes of practice are: managing the risk of falls at workplaces and preventing falls in housing construction.

The code states erecting a temporary bracing system as guard railing around an unprotected edge may be used to provide effective fall protection at the perimeters of buildings or other struc-

industry that tradies are often afraid to voice accidents and chose to continue working while injured.

Dean Hall from the CFMEU says under-reporting of incidents is an ongoing problem, particularly in civil construction.

“It’s extremely concerning, I’d say 50 per cent of the accidents and injuries in the construction industry are either not

“It’s actually a plague in the construction industry at the moment and we’re going to target it.”

CFMEU spokesman

believes recorded accident figures on Australian construction sites are just the tip of the iceberg.

The union goes as far as to say half of accidents and injuries on building sites are not reported properly.

The Work Health and Safety Act 2011 requires construction employers to report workplace injuries and near-misses but such is the volatile nature of the

24

reported or massively under-reported,” he has said.

“We’re seeing time and time again, the most dodgy builders and subcontractors in the industry either not reporting or under-reporting.”

Another CFMEU spokesman added: “It’s not in their interest to report an accident or serious injury because there is a real chance that when the WorkSafe

DIPACKS R BITS HAN E IV R D D E RIBB Code: PH225SRH PH2 X 25MM PHILLIPS RIBBED INSERT BITS

Sold in packs of 10

Bits are magnetized

Premium quality S2 raw material

$

090ea ( 6

$ 00

$

150ea ( 13 $

00

1100W motor

per pack)

Code: PH250SRH PH2 X 50MM PHILLIPS RIBBED POWER BITS

Ribbing for additional gripping power

Superior Quality Driver Bits

MB351L MA XBOR DRILL MAG BASED External coolant system

Brass dovetail slides

per pack)

Code: PH275SRH PH2 X 75MM PHILLIPS RIBBED POWER BITS

$

190ea ( 17 $

00

Quick release arbor

per pack)

Code: PH2100SRH PH2 X 100MM PHILLIPS RIBBED POWER BITS

Full body hardness for longer service life

$

2

80

35mm x 50mm DOC Code: MB351L $ 00 Cutter Capacity

995

ea ($2200 per pack)

ANNUL AR 8 PIECE U C TTER SET

NAL ROFESSIO APE T TLR3095 PS L ED REE STEEL CLO

Improved wear resistance

Belt clip on back

Easy winder in side for fast retraction

10mm abrasion resistant nylon coated steel blade

Rubber grip impact resistant case

Greatly enhanced cutter life

Code: CHSSSET25-8 Claw and loop end hook for any job Code: TLR3095 (30M) METRIC

$

3500

Code: TLR3095I (30M / 100FT) METRIC / IMPERIAL

$

3500

+ Carry handle + Adjustable motor slide height for jobber drills + Dual core high density magnet for maximum adhesion + Chip guard kit + Safety chain + Protective carry case & hex keys + Overload protection + 12 months warranty

$

26500

Tempered black oxide finish

Alternate tooth geometry

Reduced friction

Multi-Fit shank

* All prices including GST.

QUALITY TOOLS & eQUIpmenT!

$1199

$99900

$69900 * All prices including GST.

NEW!

NEW!

NEW!

upright truck box

upright truck box 2 drawer white • Manufactured from heavy gauge steel • White Hammertone UV Industrial Powder Coat • Fully Lockable Lid • Weight: 62kg • 2 Shelves with Dividers • Heavy Duty Carry Handles • W 705mm x D 605mm x H 705mm part No 51202w

upright truck box 4 drawer white

• Manufactured from heavy gauge steel • Fully lockable lid • White hammertone UV industrial powder coat • Full length shelf with 7 dividers, 1 half shelf with 3 dividers • W 1200mm x D 605mm x H 750mm • Weight: 98.8kg part No 51204w

$1699

$89900

4 drawer extra large white • Manufactured from heavy gauge steel • White hammertone UV industrial powder coat • 4 Heavy duty carry handles • 2 Shelves with Dividers • 4 Drawers with weather channels • Fully lockable lid • W 1500mm x D 605mm x H 750mm • Weight: 119kg part No 51205w

$49900 pedestal drill press

pressure washer 7hp petrol • Max Pressure 2800 PSI @ 8.3LPM • Pressure Adjustable • Convenient Hose & Gun Hook • Professional Trigger Gun with Safety Lock part No k16201

pressure washer 11hp diesel

• Max Pressure 3200 PSI @ 11.3LPM • 8m High Pressure Hose • Key Start Diesel Engine part No k16202

• Can be used with Mains Water or Tank Water

• Can be used with Mains Water or Tank Water

$44900

$14900

$69900

• Motor: 230v - 50Hz - 550watt • Swing: 305mm • Depth Gauge • Chuck Capacity: 16mm • Electronic Speed Control • Spindle Speed: Variable • Speed Range: Variable Speed 450-2500 RPM • Overall Height: 1610mm • Adjustable Roller Guide part No k15320

sher

Pressure Wa Accessories

Sprayer Storage for Gun Bottle & Turbo

• Can be used with Mains Water or Tank Water

pressure washer 6.5hp petrol

• Max Pressure 2500 PSI @ 8.3LPM • 8m High Pressure Hose • In Line Water Filter • Professional Trigger Gun with Safety Lock part No k16200

Storage for 3M Hose

beNch drill press

• Motor: 230v - 50Hz - 550watt • Swing: 305mm • Chuck Capacity: 16mm • Electronic Speed Control • Spindle Speed: Variable • Speed Range: Variable Speed 450-2500 RPM • Overall Height: 940mm • Adjustable Roller Guide part No k15310

0V 1300w washer 24 pressurr eboth Turbo and Multi Lance • Storage fo • 3m Hose I) r Power Lead PS • Storage fo essure 100 BAR (1450 Pr • Maximum sure 67 BAR (970 PSI) es • Working Pr ad • Flow Rate 6 LPM top Le • Auto Start/S • 5m Power Spray Bottle r fo e ag or • St 6299 part No k1

$2995

$2995

each

$14900

autoMatic wire stripper

with criMper 200MM (8") • Strip & Cut Cable/Wire 24 - 10 Awg (0.2 - 6.0mm) • Crimp 22 - 10 Awg (0.5 - 6.0 M2) Insulated Terminals • Crimp 22 - 10 Awg (0.5 - 6.0 M2) Non-Insulated Terminals • Crimp 7 - 8 Ignition Terminals part No k4001

$2495

from

ball poiNt hex key set 9 piece iMperial • 1/16 x 14 x 90 - 3/8 x 40 x 224mm part No k5042 ball poiNt hex key set 9 piece Metric • 1.5 x 14 x 90 - 10.0 x 40 x 224mm part No k5043 taMperproof torx® set 9 piece • T10H x 14 x 90 - T50H x 40 x 224mm part No k5044 torx® key set 9 piece • T10 x 20 x 90 - T50 x 50 x 235mm part No k5009

beNch drill press

beNch MouNted • Motor: 230v - 50Hz - 250watt • Chuck Capacity: 13mm • Swing: 208mm • Depth Gauge • Overall Height: 580mm • Speed Range: 5 Speed 500-2500 RPM part No k15300

Multi-grip pliers

• With 5 position heavy duty groove joint adjustable head • 250mm (10") part No 1702010 $24.95 • 300mm (12") part No 1702012 $44.95 • 400mm (16”) part No 1702016 $64.95

*On Selected MOdelS Worklight K15320 / K15310

Precision Power Tools

Variable Speed

Laser Digital RPM Guided Display

25

Workplace safety

tures, at the perimeters of skylights or other fragile roof materials and at openings in floor or roof structures and edges of excavations.

One such American-designed, Australian manufactured solution is the temporary guardrail system called the

claim that sales of the $35 contraption have been increasing steadily over the past two years.

Managing director Jeff Wellard believes that had the Safety Boot system been installed correctly on the project where the young workman toppled

“Education is the best way of changing the culture of the industry so that work health and safety becomes integral to all workplace tasks.”

Bradley Rea, occupational health and safety research officer

Safety Boot, a special polymer base that is fastened to any substrate (timber or concrete) and then used to erect a temporary railing system that meets the requirements of AS/NZ4994.1-2010 and AS/NZ4994.3-2010.

Victorian based Independent Fastening Systems (a member of the CSS group) market the product nationally through a key distributor network and

26

through the open stairwell void, this may never have happened.

He said, “The greatest problem on building sites is a lack of supervision/understanding/awareness of this problem and the Safety Boot is a safety device that can prevent falls from around stairwells, open balconies and exposed edges at height. You can use it to build a temporary fence around any hole big

enough for a bloke to fall through or along an open, exposed edge such as an elevated slab or balcony. It doesn’t cost much but it can save a life. I’m pretty confident in saying that if the system had have been used on the worksite in Keysborough two summers ago, the young worker may not be in a wheelchair today”.

New plans are continually being hatched to improve workplace safety within construction.

The (MBA) says it is important workers are observant on construction sites and take responsibility for their own actions.

Bradley Rea, occupational health and safety research officer, added: “All businesses and all workers have a basic duty of care to safeguard both their own and other’s health and safety.

Training for work health and safety is a priority, especially for young people entering the industry. Death in the workplace should be a thing of the past.” 

A simple solution for temporary hand rails

$

.00

35

SAFETYBOOT

T O O B Y SAFET

cting onstru e for c s a b e ctiv 4994.3 ost effe y guardrails. .1 & AS able, c r S4994 A f A re-us ing tempora o ments nd require free-sta s with e li p down m • Co als d take materi t up an e s y s t s base o m • Ea n do be use • Can All prices include GST

27

CONSTRUCTION LASERS & LEVELS 57177

RL-H4C

Australia's No.1 laser • • • • • •

Self levelling 800m range Automatic height alert Slope capable +/- 1.5mm @ 30m Rechargeable kit available

AT-B4

Inc. GST

60909

$363.00

• • •

AT-B4 Optical level 24 x Magnification Gun sight sighting aid

•

+/- 2.0mm accuracy per 1km double run

PLUMB

HVR505G • •

$1204.50

LEVEL

Inc. GST

SQUARE

PLS4

PLS-60582

Green beam 4 x Brighter Self levelling in vertical & horizontal modes Plumb beams top & bottom 300m range Supplied complete with accessories

• • •

$1204.50

PLS3 • • •

• •

Fully self levelling Plumbs floor to ceiling Level beam

Inc GST

Plumb, level and square lines Combination of up and down dot points Self levelling in all modes Optional receiver for outdoor use

$566.50

Inc GST

PLS-60523

$291.50

• •

PLS-60574

PLS2 • • •

Inc GST

PLS-60528

Horizontal, vertical or cross line +/- 3mm @ 10m Self levelling to 6 degrees

$264.00

Inc GST

28

Milwaukee Power Tools has launched a new

Milwaukee’s experienced team visit your work site - be it commercial, industrial, mining or oil and gas infrastructure - to conduct a thorough review into how your workers are using their tools and what

initiative in the Australian

applications and obstacles they face on a daily basis.

power tool market,

From this assessment, Milwaukee provides solutions to your power

offering the first devoted

tool inventory management, both by increasing productivity with

Job Site Solutions team.

PROBLEM

new application solutions and substantially reducing your costs via streamlining and consolidating your cordless tool platforms.

SOLUTION

To arrange a site audit, contact your local Store - (see details at the front of catalogue)

All prices include GST

M18 CORDLESS 2 SPEED GREASE GUN KIT 6

WARRANTY

CORDLESS LI-ION

5 2

YEAR YEAR TOOL

BATTERY

 Milwaukee’s patented POWERSTATE™ Brushless motor.  REDLINK PLUS™ Intelligence electronics provides total system communication between tool, battery and charger.  Powered by Extended Capacity REDLITHIUM™ battery technology.  100% tool-free Type 27 burst resistant guard and FIXTEC lock nut.  The thin body design delivers optimised balance.

$399 $659

M18GG-202B

WARRANTY

M18 310ML CAULK AND ADHESIVE GUN KIT 6

Tool only

CORDLESS LI-ION

5 2

YEAR YEAR TOOL

BATTERY

Kit

M18CAG125XPD-0 M18CAG125XPD-402C

M18 600ML ALUMINIUM BARREL CAULK GUN KIT 6

CORDLESS LI-ION

5 2

YEAR YEAR TOOL

 Milwaukee® 4-pole motor delivers up to 4500N of force.  Anti drip feature prevents unwanted dripping.  Dial control with 6 speed settings.  REDLINK™ overload protection electronics.  Variable speed trigger for bead control.

 Milwaukee® 4-pole motor delivers up to 4500N of force.  Anti drip feature prevents unwanted dripping.  Dial control with 6 speed settings.  Constant flow technology.  Variable speed trigger for bead control.

Kit includes (1) 2.0Ah REDLITHIUM™ battery, 12V-18V Dual Voltage Charger and contractor bags.

Kit includes (1) 2.0Ah REDLITHIUM™ battery, 12V-18V Dual Voltage Charger and contractor bags.

C18PCG310-201B

$369

M18 FUEL 3B POWER PACK 6

$799

4PCE HEAVY DUTY POWER PACK KIT 6

Kit includes:  13mm Cordless Hammer Drill/Driver.  1/4” HEX Cordless Impact Driver.  Heavy Duty 1/2” High Torque Wrench with detent pin.  Heavy Duty 115mm Angle Grinder.  3 x 3.0Ah RED LITHIUM-ION Batteries.  Charger, Carry Bag. HD18PP4S-303B

$369

230MM ANGLE GRINDER 6

 M18 FUEL™ 13mm Hammer Drill/Driver.  M18 FUEL™ 1/4″ HEX Impact Driver.  M18 Heavy Duty 115mm Angle Grinder.  Powered by REDLITHIUM™.  M12-M18™ Dual Voltage Charger.  XL Contractor Bag. M18PP3B-402B

C18PCG600A-201B

BATTERY

$949

$249 $569 Tool only

M18 FUEL 2A POWER PACK 6

Kit

WARRANTY

 10,000psi max operating pressure.  Delivers 284g/min of flow rate.  Flexible hose for access to Barrel capacity difficult fittings.

450g Cartridge  Lock-on/ Lock-off trigger M18GG-0

NEW FUEL 5" (125MM) ANGLE GRINDER KIT 6

New Product

WARRANTY

Order now for November Delivery

CORDLESS LI-ION

5 2

YEAR YEAR TOOL

BATTERY

 M18 FUEL™ 13mm Hammer Drill/Driver.  M18 FUEL™ 1/4″ HEX Impact Driver.  Powered REDLITHIUM™.  M12-M18™ Dual Voltage Charger.  FUEL™ Hard Case.

M18PP2A-402C

$669

125 MM (5") ANGLE GRINDER, 1500W 6

 Ergonomically designed with Rat Tail grip.  Double Action DEADMAN switch.  Starting Current Limiter & Soft Start.  Anti Vibration System (AVS) for user comfort.  3 Year Warranty.

 Milwaukee electronics offer Soft Start, Line Lock-Out, Clutch and Overload Protection.  Constant Power Technology™.  Electronic Variable Speed Control.  Tool-Free Adjustable Guard.  FIXTEC™ nut for quick, tool free disc changing.  Anti-Vibration Side Handle.

Power input 2200 W Disc diameter 230 mm No load speed 6,600 rpm

Power input 1550W Disc Diameter 125mm No load speed 11,000 rpm

AGV22-230

$195

12PCE DEMOLITION KIT SAWZALL™ BLADES 6

$220

SHOCKWAVE 29-PIECE DRIVER BIT SET 6

 Includes New wood blades featuring NAIL GUARD™ and FANG TIP™  NAIL GUARD™ combines an aggressive 5 TPI pattern for faster cutting, with a unique design that protects against tooth fractures.  The FANG TIP™ design bites into wood on first contact for faster plunging.  1" tall blade profile for straighter cuts.  Double relief angle reduces tooth stress for long life.

49221129

AGV 15-125XE

$45

 Manufactured with custom engineered steel.  Heat treated for high shock resistance.  Geometric shock absorption zone that extends life.  29 bits and storage case included.

48324401

$29

29

30

NEW DECK BIT 10 GAUGE

DECK BIT 14 GAUGE

$27.45 INCLUDING GST

DECK BIT 10G

$30.75 INCLUDING GST

Drill & countersink in one operation PART# 2203-10G

DRILL SET METRIC

$91.30 INCLUDING GST

DECK BIT 14G

Drill & countersink in one operation PART# 2203-14G

DRILL SET IMPERIAL

LARGE 30-290MM

$101.75 INCLUDING GST

SAVAGE TIN COATED HSS JOBBER DRILL SETS 1.0-13.0 x 0.5mm 1/16-1/2 x 1/64"

PART# 10-M3P PART# 11-F3P

$231.00 INCLUDING GST

MEDIUM 30-220MM

$187.00 INCLUDING GST

ADJUSTABLE LARGE DIAMETER CARBIDE BLADE HOLE CUTTER 30-290mm 30-220mm

PART# 7096-285A PART# 7096-220A

SAVAGE TIN COATED HSS DBL ENDED PANEL DRILLS HIGH PERFORMANCE 135º SPLIT POINT – 10 PACKS

No.30

#11 #20 #30 1/8"

DBL ENDED PANEL DRILL P.O.A DBL ENDED PANEL DRILL P.O.A DBL ENDED PANEL DRILL P.O.A DBL ENDED PANEL DRILL P.O.A

DOUBLE ENDED HSS TiN COATED PANEL DRILLS 10 PACK

PART# 40-11 PART# 40-20 PART# 40-30 PART# 40-1/8

ENGINEERING EXCELLENCE All prices include GST

Premium Professional Products GP Welding Q/A Clamps

Levels for the trade you can trust to be reliable and accurate

2 permanently fixed non-fade, non leak, electrostatic stable vials for lasting accuracy. Suitable for normal and upside down measuring.

600mm 80A/60 800mm 80A/80 1200mm 80A/120

$38 $42

$34

260mm Magnetic Angle Measuring Level 70TMW/25 Two permanently fixed and one 360° rotating non fade, non leak, electrostatic stable vials for lasting accuracy.

Suitable for normal measuring.

Fully heat treated and profile rail for improved SAFETY & GRIP at high pressures. New design delivers 20% more pressure per spindle rotation.

200mm GZ20K

$52

250mm GZ25K 300mm GZ30K

$42 $49 $57

All prices include GST

31

$2,160 INC GST

$2,269 INC GST

$35.00 INC GST

$50.00

$21.50

INC GST

INC GST

$17.50 INC GST

All prices include GST

Partnerships

Building success For the Canzoneri brothers, success in business is as much about partnerships as experience

I

t says something about the values that drive a business like the C3 Construction Group. Originally a family company called Classic Paving, and now run by brothers Sebastian and Salvatore Canzoneri, it has grown to become one of the largest tilt panel builders in Melbourne. And they’ve recently finished working on a site in Ravenhall, northwest Melbourne that is about as far as you can possibly get from those small paving jobs their father started out doing all those years ago.

“The Ravenhall construction is using more than 60,000 square metres of land,” explains Sal Canzoneri. “There is about 35,000 square metres of building, and the rest is car parking and landscaping. There’s 53 buildings on the site, all of various sizes.”

Normally a job of this size would take a contractor up to 18 months to complete, but the C3 Construction Group tackled it in half that time. “We can do it quickly because we’ve got a good group working with us, and we’ve refined the process over 20 years to get the most efficiency out of manual labour,” says Sal. Years of experience in the business help them achieve those aims. “My father went into residential building originally, and over time moved into commercial construction. In the 90’s we joined the business and together we have contributed to the growth and expertise from a once-small business into what it is today,” Sal explains.

“We always strive to be the best we can at this. We’re primarily builders with the capacity to do concrete in house—we’re a one-stop shop. That’s why we strive to do the best we can on the larger scale projects like this one.”

Partnerships are an essential element of being able to offer such as service, and two of the key partners the Canzoneri brothers are DBF Tools

32

Construction Supply Specialists

The site at Ravenhall in northwest Melbourne comprises of 53 factories utilising up to 1,000 tilt up panels.

“DBF is essential to our productivity because of their prompt deliveries. They deliver all my lifting equipment, all my tools—they are very efficient in bringing out materials. ”Salvatore Canzoneri, C3 Construction Group.

and Reid Construction Systems.

“Reid’s design engineering and certification services are signed off by our qualified engineers boasting years of onsite experience,” says Reid’s Peter Atanasovski. “Our design team leaves nothing to chance: we provide for correct lifter placement, carefully calculating the most efficient method for safe lifting and bracing. Our Bracing certification provides the location of the Reid bracing ferrule along with the braceto-slab location where BraceSet™ is used. This is has been achieved with the input and support of our customers via our Lifting and Bracing On-Line request system.

“The comprehensive range of Reid tilt up solutions armed DBF and C3 Construction Group with a full arsenal of hardware and components for this massive pour. Our “one-stopshop” approach for tilt assisted the Canzoneris in saving them valuable time, money and effort from sourcing products from multiple suppliers.

With Reid on hand, they were able to source quality engineered solutions and systems for tilt up, that are designed to improve efficiency, further reducing in-place costs.”

DBF was also an essential partner in working with Reid, supplying key tools and products for the build, including Stanley hand tools, DeWalt power tools, and fixings from Bremick Fasteners and sealants from Bostik. “DBF is essential to our productivity because of their prompt deliveries,” Sal says.

“They deliver all my lifting equipment, all my tools—they are very efficient in bringing out materials. If someone forgets something, it’s just a quick phone call to get it replaced.”

“They are one of DBF’s very loyal customers and support us 100 per cent, as we do to them,” says Fred Hall of DBF Group.  Construction Supply Specialists

33

All prices include GST

Simpson Strong-Tie Fasteners Collated And Loose — The Complete Decking Fastener Family

34

QUIK DRIVE® PRO250G2 SYSTEM

QDPRO250G2IK

BONUS WITH THE QUIK DRIVE® PRO250G2 SYSTEM

PDECKNC-RC

New Decking Nose Clip • Spaces decking boards for either 3mm or 5mm gaps • Sets the screws in a straight line along the joist • Fits easily onto the QDPRO250 attachment

Quik Drive® PRO250G2 Tool for Flooring and Decks - $399 • Auto-feed system for 8g and 10g screws or 42-65mm screws • Heavy-duty tool for flooring and decking applications • Screws for fixing to timber and steel joists – no more squeaking floors • Comes with adaptors to suit Makita®, Hitachi® and Bosch® screwdriver motors DHPDG – HARDWOOD DECK SCREW

DHSD – HARDWOOD TO HARDWOOD

• Unique tip design drills the hole as the screw is driven • Wings assist countersinking as the screw is driven Product Code

DHPDG Series

Description

10g x 63mm, Compact Head, 10 TPI, Winged, Spade Point, C3 Galvanized Coating #2 Sq. Recess, 1000 per box

10g x 63mm, Compact Head, 10 SSDHPD Series TPI, Winged, Spade Point, 305 SS. #2 Sq. Recess, 1000 per box

• Hardwood to hardwood without predrilling • Compact head for neat finish

Collated

Loose

Product Code

$155.00

$135.00

SSDHSD50S

$420.00

$399.00

SSDHSD60S

Description

Collated

Loose

10g x 50mm Hardwood to Hardwood Deck screw 305SS #2 Sq Recess, 1000 per box

$299.00

$250.00

10g x 60mm Hardwood to Hardwood Deck screw 305SS #2 Sq Recess, 1000 per box

$349.00

$299.00

All prices include GST

Convertible Retaining Ring Pliers

• Convert between internal and external with a quick flip of a switch • Eliminates the jaw aligning pushpin process • Double-dipped custom grip made of low-temp, high-impact material

QUICK SWITCH RATCHET PLIERS with AUTOMATIC LOCK and TIP KIT $

• Spring return handles • Each pliers includes a tip kit containing durable alloy, colour-coded interchangeable tips and hex key, all stored in a handy pouch

2 Pce QUICK SWITCH PLIERS AUTOMATIC LOCK and TIP KIT

115.00

115

$ .00 Model - L1450 Contains 2 pliers (L1421 and L1434) c/w Interchangeable tips Ring Size Range L1421 Internal 7-26mm (1/4 - 1”) External 3-26mm (1/8 - 1”) Ring Size Range Internal 10-51mm (3/8 - 2”) External 7-51mm (1/4 - 2”)

Model - L75 Automatic Ratchet Lock feature keeps rings open or closed c/w Interchangeable tips Ring size range Internal 46-102mm (1-13/16 - 4” External 32-102mm (1-1/2 - 4”

12 PIECE COMBINATION INTERNAL/EXTERNAL SNAP RING PLIERS SET Fixed Tip Retaining Ring Pliers

$

• Pliers are convertible for use on internal and external snap rings with cushioned grip handles • Pliers have a knurled centre screw with spring for easy changing and secure hold • Sets are packaged in a plastic blow moulded case for protection and easy use

199

.00

$

279.00

Cuts corrugated and flat steel with ease.

Slim profile tips for tight applications.

Model - EZIS012

Model - L3495 Includes 12 fixed tip pliers sizes: • 0.038”, 0.047”, 0.070” and 0.090” tip diameter • 0°, 45° and 90° offsets

Recommended for electric drills under 3000rpm with metal nose piece

Sheet Metal Cutting Attachment for Electric Drills with 1/2" x 20tpi thread Made from very resilient 86/40 Carbon Steel

35

18V 5pce Heavy Duty Kit 18V DB 5-XGH2L

18V 2pce Heavy Duty Kit 18V DBX 2-Premium • 18V GSB Destroyer Heavy Duty Hammer Drill • 18V GDX Heavy Duty Impact Driver / Impact Wrench • 2 x 4.0Ah 18V-LI Batteries • Tool Bag

• 18V GSB Destroyer Heavy Duty Hammer Drill • 18V GDX Heavy Duty Impact Driver / Impact Wrench • 18V GWS Angle Grinder • 18V GBH Compact Rotary Hammer • 18V GLI Vari LED Torch • 3 x 3.0Ah 18V-LI Batteries • AL1860CV Charger • Large Tool Bag

0.615.990.FS7

0.615.990.FS9

$549.00

$929.00

18V 2pce Heavy Duty Kit 18V HTG 2-Premium

GBH2-26 DBR Bulldog Xtreme

• 18V GDS High Torque Impact Wrench • 18V GWS Angle Grinder • 2 x 4.0Ah 18V-LI Batteries • AL1860 Charger • Tool Bag

• • • •

0.615.990.FS6

0.611.255.569

$929.00

$289.00

GWS12-125CIEP

GLL3X Professional

• • • • • • • •

• Line Laser • Compact, modern and robust design • Easy to use for versatile applications • Vivid line visibility • 1 cross line and 1 vertical • 0.5m drop resistance

125mm, 1,200W Paddle Switch PROtection Switch Kick Back Stop Bosch Vibration Control Restart protection Burst proof guard Constant speed electornics

SDS-Plus tool holder Rotation stop for chiseling Forward/ reverse operation Overload Clutch Protection

0.601.794.242

0.601.063.CJ0

$299.00

$149.00

Diablo Demo Demon Demolition Circular Saw Blade

12pc Demolition Sabre Saw Set

• 7 ¼" / 182mm Circular Saw Blade • 24 Tooth blade

• 12 Piece Set • General Purpose Demolition

2.608.642.395

2.607.010.671

$29.99

$39.95 All prices include GST

36 Dri Core Holesaw Kit Cat No. BMKIT1

$449.00 inc gst

Telecommunications Holesaw Kit Cat No. K500T

• Use for deep cutting on most building materials e.g. stone, brick and unreinforced concrete • Consists of 38, 52, 65, 117 and 127mm Core Drills • Includes: Hex adaptor, SDS adaptor, 240mm long hex & SDS extensions, pilot drill, drift key

$230.00

inc gst • Constructed of hardened, heat and abrasion resistant material, high speed teeth with tough alloy body and cap • Cuts through any wood, metal or plastic • Kit includes holesaw sizes: 30, 46, 66, 95 & 123mm Arbors: KA1-E and KA10E-E Ejector Spring: A7

Dual Purpose Holesaw Kit Cat No. KDM-MOAK

$249.00 inc gst

• Bi Metal and Multi Purpose holesaws • Multiple uses on wood, MDF, plastic, ceramic wall tiles and building bricks • 6 Bi Metal sizes: 16, 20, 25, 32, 35, 40 and 51mm • 8 MPH sizes: 40, 51, 54, 73, 76, 83, 89, 92 and 95mm • Arbors: KA1E-E, A17-38E, A7 ejector spring

Diamond Grit Holesaw Kit Cat No. KD09041-N

$400.00 inc gst

• Features a diamond coated cutting edge permanently bonded to a tough alloy steel body • Will cut rapidly through reinforced plastics, glass, marble, granite, stone ceramics tiles and hard porcelain tiles • Sizes: 19, 22, 29, 35, 38, 44, 51, 57 and 64mm • 2x adaptors with TCT pilot drills, 1 extra pilot drill and 1x 300mm extension

Electricians Bi Metal Holesaw Kit Cat No. KDP100

$105.00 inc gst

Smooth Cut Holesaw Kit Cat No. KCSC2000G

• Constructed of hardened, heat and abrasion resistant material, high speed teeth with tough alloy body and cap • Cuts through any wood, metal or plastic • Sizes: 16, 20, 25, 32, 40 and 51mm • Arbors: KA4E-E, KA10E-E, A7 ejector spring

$175.00 inc gst

• Bi Metal Cordless Smooth Cutting Holesaws cut twice as many holes per battery charge compared with a standard Bi Metal holesaw • Complete with arbor, pilot drill and ejector spring • Sizes: 16, 20, 25, 29, 30, 32 and 38mm

Diamond Grit Tile Drill Kit Cat No. KD2000TD1

$99.00 inc gst

with BONUS Drill Guide

• Features a diamond coated cutting edge • Will cut rapidly through reinforced plastics, glass, marble, granite, stone, ceramic tiles and hard porcelain tiles • Sizes: 5, 6, 6.5, 8, 10 and 12mm

Plumbers Bi Metal Holesaw Kit Cat No. KDP290

$175.00 inc gst

• Constructed of hardened, heat and abrasion resistant material, high speed teeth with tough alloy body and cap • Cuts through any wood, metal or plastic • Sizes: 19, 22, 29, 35, 38, 44, 51, 57 and 64mm • Arbors: KA1E-E, KA2E-E, KA15-E extension

All prices include GST

37 Hand Hacksaw Blade 300mm Length Heavy Duty Hacksaw Frame Cat No. 145

$35.00 inc gst

• • • •

Heavy duty high tension frame Easy blade tension action Professional quality Cuts 90 and 45 degree angles

Video Inspection Scope Cat No. 698-10

• Bi Metal Unique Safe-Flex blade • Multi-Edge Split Chip Advantages for longer blade life and faster cutting • Unbreakable during normal use Cat. No.

Length

Teeth Per Inch

BS1218

300mm

18 tpi

BS1224

300mm

24 tpi

BS1232

300mm

32 tpi

$1.70

each blade inc gst

7” Pro-Site™ Mitre Protractor Cat No. 505P-7

$39.00 inc gst

• The Starrett Pro-Site™ Protractor takes error prone calculations out of the process of mitre cuts • Easy to use tool has two scales

$550.00 inc gst

• Auto focus digital camera • Three light intensity settings • 1.8m flexible, water resistant shaft with metal tip • 63mm full colour image sensor • Dual solid state LED illumination

Outside Micrometer 436 Series

Pocket Digital Precision Tachometer Cat No. S7793Z

$815.00 inc gst

• Powerful 30 function tachometer allows contact and non-contact measurement • Measures in revs, inches, feet, yards, centimetres and meters • Supplied with a calibration certificate • Kit contains: electronic pocket tachometer kit with case, contact tip, 9V battery and reflector tape

• Metal ratchet and locking assemblies • 0.01mm Graduation Cat. No.

• Carbide micro-lapped measuring faces • Accurate, rugged and easy to use • No glare satin chrome finish • Balanced one-piece frame • Hardened steel spindle for long accurate life

Description

436.2MXRL-25

0-25mm

$80.00 inc gst

436.1MXRL-50

0-50mm

$85.00 inc gst

Electronic Caliper - IP67 798B Series • IP67 level of protection against foreign material including coolant • RS232 data output • Hardened stainless steel measuring surfaces • Zero at any position • Automatic shut off after 30 minutes of non-use

Cat. No.

Description

798B-6/150

150mm

$220.00 inc gst

798B-8/200

200mm

$280.00 inc gst

798B-12/300

300mm

$435.00 inc gst

All prices include GST

38

®

A new breed of ladder

Features: Fibreglass 150kg Industrial, Non-slip aluminium treads, Cross-braced spreader, Patented Resin Bracing System

Double Sided Ladder

Dual Purpose

Material: Fibreglass 150kg Industrial

Material: Aluminium 150kg Industrial

Height: 3ft (0.9m) Code: FSM003-I PRICE $139 Height: 4ft (1.2m) Code: FSM004-I PRICE $179 Height: 6ft (1.8m) Code: FSM006-I PRICE $279 Height: 8ft (2.4m) Code: FSM008-I PRICE $389 Height: 10ft (3.0m) Code: FSM010-I PRICE $479 Height: 12ft (3.3m) Code: FSM012-I PRICE $579

Height: 1.8-3.3m (6-11ft) Weight: 10.7kg Code: DM006-I PRICE $175

FSM006-I, FSM008-I, FSM010-I and FSM012-I Stabiliser Ready

Straight Builders Ladders Material: Aluminium 140kg Industrial

Features: Strong Roll-Locked D-Rungs, Non-slip treads, Non-marking feet, Optional hooks for use with scaffold, Ladder bumpers (LB-01) also available to protect walls All prices include GST

Height: 2.4m (8ft) Weight: 5.7kg Code: SBL008-I PRICE $129 Height: 2.7m (9ft) Weight: 6.4kg Code: SBL009-I PRICE $139 Height: 3.1m (10ft) Weight: 7.4kg Code: SBL010-I PRICE $149 Height: 3.7m (12ft) Weight: 8.3kg Code: SBL012-I PRICE $169 Height: 4.3m (14ft) Weight: 9.9kg Code: SBL014-I PRICE $199 Height: 4.6m (15ft) Weight: 10.2kg Code: SBL015-I PRICE $209 Height: 4.9m (16ft) Weight: 11.6kg Code: SBL016-I PRICE $219 Height: 5.5m (18ft) Weight: 12.1kg Code: SBL018-I PRICE $249 Height: 6.1m (20ft) Weight: 13.4kg Code: SBL020-I PRICE $289

Height: 2.1-3.9m (7-13ft) Weight: 12.16kg Code: DM007-I PRICE $205 Height: 2.4-4.5m (8-15ft) Weight: 14.28kg Code: DM008-I PRICE $235 Material: Fibreglass 150kg Industrial

Features: Stabiliser ready, Converts from Double Sided A-frame to straight ladder in seconds, Cross-braced spreader, Patented Resin Bracing System, Non-slip aluminium treads and top cap

Height: 2.1-3.8m (7-12ft) Weight: 14.8kg Code: FDM007-I PRICE $309

Order Picking Ladder

Features: Large platform surface: 600mm (wide) x 585mm (deep). Patented raise/lower mechanism provides effortless and reliable activation

Material: Aluminium 200kg Industrial Height to platform: 0.9m Weight: 33.3kg Code: GOP03 PRICE $989

Optional accessories: • Safety Boom (providing back support for added safety) • Work Tray. Maximum load 25kg

Height to platform: 1.2m Weight: 34.6kg Code: GOP04 PRICE $1,129 Height to platform: 1.5m Weight: 38.2kg Code: GOP05 PRICE $1,299 Height to platform: 2.1m Weight: 46.2kg Code: GOP07 PRICE $1,499

* Picture features optional accessories

GOP-BOOM PRICE $69

Height: 1.8-3.2m (6-10ft) Weight: 12.8kg Code: FDM006-I PRICE $259

GOP-TRAY PRICE $129

GOP-HANDRAIL PRICE $89

Taking Ladder Safety to New Heights

Xtreme Life Blaze - R980P Flap Discs • Ceramic abrasive grain flap discs, engineered for higher productivity.

• Last 50% - 200% longer than the current generation of discs.

• Lower total grinding costs on stainless steel, cobalt, chrome, inconel, titanium and other hard to grind materials.

PART NUMBER

DIAMETER

DESCRIPTION

662544 12097 / 662611 93211 / 662544 12098

100mm

100 x 16mm R980P Blaze Cloth Flap Discs C40 / C60 / C80

$7.50

PRICE

662611 83487 / 662611 83488 / 662611 83489

115mm

115 x 22mm R980P Blaze Cloth Flap Discs C40 / C60 / C80

$8.50

662611 90002 / 662611 90003 / 662611 90004

125mm

125 x 22mm R980P Blaze Cloth Flap Discs C40 / C60 / C80

$10.50

662611 83495 / 662611 83496 / 662611 83497

180mm

180 x 22mm R980P Blaze Cloth Flap Discs C40 / C60 / C80

$17.00 All prices include GST

39

2 PieCe Gas CoMbo Kit

HiGH PRessuRe WateR CleaNeR

$219 HW112 Max. 120Bar / 1740psi Steel reinforced hose ■■ Automatic safety valve with low pressure by-pass ■■ Built-in hose reel ■■ ■■

GAS200

$1059

GN900SE - Gas Framing Nailer Kit GF600Z - Gas Finishing Nailer (Tool Only) ■■ BL7010 - 1.0Ah Battery ■■ ■■

18V Mobile Multi tool

18V 1.6mm Mobile NibbleR

18V 2 PieCe CoMbo Kit

$459 $210

BJN161Z

High cutting capacity Die rotates 360º ■■ Easy to operate slide type ■■ On/off switch with lock on function ■■

LXT211N

■■

BTM50ZX5

Variable speed control by dial ■■ Single LED job light ■■ Anti-restart function ■■ Battery capacity warning lamp ■■

$90

Jobsite Radio

18V 2 PieCe CoMbo Kit

BL1830-L

$140

■■

PoWeR Cut

18V Li-Ion 3.0Ah Battery

$329 BMR102

MP3 compatibility / iPod 2-speaker stereo system ■■ Dual power sources - AC or Makita batteries ■■

BHR243Z

LXT212

■■

■■

Brushless DC motor helps to reduce energy loss by 30% ■■ One-touch sliding SDS Plus Type chuck ■■ Ergonomically designed, easy to grip handle

■■

18V bRusHless RotaRy HaMMeR

$540

BHP458RFE Mobile Hammer Driver Drill ■■ BTD146Z Mobile Impact Driver (Tool Only) ■■

$559

BHP458RFE Mobile Hammer Driver Drill ■■ BGA452Z Mobile 115mm Angle Grinder (Tool Only) ■■ 831278-2 Tool Bag E&OE / 3431-13

All prices include GST.

Local manufacturer

Safe hands Beaver Brands has grown from a local manufacturer to a proactive manufacturer and importer which puts safety and relationships at the heart of everything they do.

A

lthough price is always an issue for those in the market for supplies, there are some things you just can’t cut corners on—safety equipment. Even if you didn’t have to worry about OH&S laws, your one peace of mind would dictate you’d want safety equipment of the highest possible standard, and manufactured or tested locally to ensure it meets local safety standards. That’s the point of difference local manufacturer and importer Beaver Brands maintains in the market, and according to General Manager Kevin Jacobson.

“It definitely provides us with a point of differentiation when compared against other providers,” he explains.

The company, which has been operating since 1977, attributes its success to a pro-active management team; the supply of quality product, a loyal customer base and commitment to service excellence through its national distribution network.

But according to Jacobson, “What differentiates Beaver is our ability to tailor a solution for customers. Our turnaround time on made to order manufactured product is seven-to-ten days.

At a local level we’re heavily invested in product testing and operate a ISO accredited quality management system which ensures we maintain full traceability of all manufactured items.

Over the last 15 years the company has diversified into other categories, but maintained a focus on meeting or exceeding Australian standards says Jacobson. “We operate 19 full-time sewing machinists that are manufacturing five days a week, every day, often longer. Once manufactured all products undergo batch testing in accordance with ISO9001 registered Quality Sys-

40

Construction Supply Specialists

Beaver Brands’ safety equipment is tested locally, whether it’s locally manufactured (see opposite page) or imported from overseas.

tem. We end up testing beyond the requirements in 99 per cent of cases.”

Beaver’s Testing facility, now based at Erskine Park, was initially set up to carry out testing of materials handling products being imported. To maintain its place in the market based on quality items, these tests had to be carried out continuously. Materials handling products being imported covered items such as chain, hooks, rings, slings, tie-downs and similar equipment. All of which need to be batch tested to ensure quality and compliance with corresponding Australian standards.

Beaver’s Testing facility is accredited

by NATA (National Association of Testing Authorities) and is audited by this organisation to ensure ongoing accreditation and compliance. With the ability

to test both finished goods and component parts, the company can provide testing services to satisfy the demands of its customers. These services are performed on a national scale to add to the growth of the company.

That approach has added value when applied to the unique Twin Path sling range. The Twin Path range offers the ultimate in abrasion resistance and contains a check fast tag and external warning indicator for a pass/fail inspection of the internal load bearing core yarn. The Twin Path is renowned as the market leader in ergonomically designed synthetic slings.

Beaver’s height safety products were developed in 2002-3. The decision to manufacture meant the company required a test program so the products

Beaver’s Testing facility is accredited by NATA (National Association of Testing Authorities) and is audited by this organisation to ensure ongoing accreditation and compliance. could be tested to the requirements of the Australian and New Zealand standard 1891.1. Beaver Brands undertook to have their testing facility expanded to include the unique test tower for such testing. Their premises were inspected by accredited Conformance Assessment Body and validated – currently Global Mark audit this facility against Beaver Brands stringent Quality System to maintain accreditation.

All harnesses that were required had jig boards made to ensure consistent compliance and conformity. The development of this product range required the development of the requisite inhouse testing system for dynamically testing harnesses and lanyards, which is now calibrated. Beaver uses this testing system to conduct Global Mark accredited tests of Industrial Safety Harnesses and Lanyards in accordance

with AS/NZS 1891.1 Today Beaver Brands is a member of the Working At Height Association (WAHA) which is an independent body of the major fall protection equipment manufacturers in Australia. WAHA facilitates a co-ordinated approach to increase the awareness of issues relating to Height Safety.

“At the end of the day, it’s all about building enduring relationships and supplying quality products,” says Kevin Jacobson. “It’s a lot more than just grabbing a product and bringing it in. So building those relationships and focusing on quality is where our strength lies.”  Construction Supply Specialists

41

All prices include GST

42

rOuND sLINGs rOOfers kIT sAfeTY eYeWeAr vIsION x sAfeTY specs $7.90 $2.99 fe001

■ ■ ■ ■ ■

Medium impact Anti-Scratch lens 99.9% UV protection for outdoor wear Complies to AS/NZ 1337.1:2010 Available in both Clear and Smoke lens

$2.99 fe002

Code: FE001 (Clear, per pair) FE002 (Smoke, per pair)

■ ■ ■ ■ ■ ■ ■ ■ ■

BH01120 Harness 15m Kernmantle safety line Rope adjuster Attachment strap 2m Shock absorbing lanyard Karabiner Personal gear bag

$305.00 GreAT vALue!

■ Conforms to AS 1353-1997 Code

Code: BK061015

AS/NZS 1337.1:2010 Standards approved.

Anti scratch coating to reduce marking & dirt build up Medium Impact protection with shatterproof lens UV400 filter for 99.9% UV protection outdoors Smoke lens to reduce glare from artifical & natural light Anti fog coating for use in humid environments Strong and flexible nylon frame construction Highly polished two tone styling Soft TPR nose bridge & side arms for comfort

■ 50mm x 9m c/w hook & keeper ■ Complies to AS/NZS 4344:2001 ■ Rated lashing capacity of 2500kg Code: RTD055PL

GreAT vALue!

Cost

1000kg x 1m Round lifting sling

$6.00

MRS1000X2

1000kg x 2m Round lifting sling

$11.00

MRS1000X3

1000kg x 3m Round lifting sling

$15.00

MRS2000X1

2000kg x 1m Round lifting sling

$9.00

MRS2000X2

2000kg x 2m Round lifting sling

$15.00

MRS2000X3

2000kg x 3m Round lifting sling

$25.00

MRS3000X2

3000kg x 2m Round lifting sling

$29.00

eGArD eArpLuGs

Truckers rATcHeT TIe DOWN AsseMBLY

$128.00

Description

MRS1000X1

Code:ME507 (per pair)

WOrkMANs kIT

■ ■ ■ ■ ■ ■

GreAT vALue!

■ ■ ■ ■ ■ ■ ■

GrADe 70 TrANspOrT cHAIN kIT

$25.00

$59.00

GreAT vALue!

GreAT vALue!

BH01120 - B-Safe Harness TG57-WH - Tuffguard Vented Hard Hat FE003 - Frontier Vision X Safety Spec Blue Mirror Lens AUSUN3050K - Frontier Auscare Sunscreen 30+ BA0351 - B-Safe Gear Bag P031B - Frontier Cowhide Rigger Glove

$9.90 GreAT vALue!

■ 8mm x 9m effective length Grade 70 Load Chain Kit. C/w 8mm Clevis Winged Cradle Grab Hooks on each end ■ Lashing Capacity 3800KG Code: 145128

Code: BK080007

■ ■ ■ ■ ■ ■ ■ ■

Complies with AS/NZS 1270:2002 Class 5, SLC80 29db Soft PU foam for comfort Hi Vis colour to identify wearer compliance Hearing protection for noise levels up to 110db (A) Hearing jar c/w 50 Pairs for convenience Retail focused packaging with barcode Sold as 50 pairs per jar.

Code: H001RPJ

All prices include GST

MAK003-T Hi-Vis Cotton Drill Shirt $39.99 with 3M Tape

MISF-2 MAK Air Vented Shirts $49.00

Toughest on the Market

MAK006 Drill Pants $39.99

MAK003-UT Hi-Vis Cotton Drill Shirt $33.00 MISF-1 Vented Pants $59.00

43

$36.00*

$45.00*

Ref. Code

P10 Paint Marker Black

12071001

P10 Paint Marker Red

12071002

P10 Paint Marker Yellow

12071005

P10 Paint Marker White

12071011

P20 Paint Marker Black

12072001

P20 Paint Marker Red

12072002

P20 Paint Marker Blue

12072003

P20 Paint Marker Green

12072004

P20 Paint Marker Yellow

12072005

P20 Paint Marker White

12072011

Product Description

Ref. Code

Weight

Ref. Code

i70 Ink Marker Black

12131201

TreadRite™ Clear

350g

23063500

i70 Ink Marker Red

12131202

TreadRite™ Black

350g

23063501

i70 Ink Marker Blue

12131203

TreadRite™ Yellow

350g

23063505

i90 Ink Marker Black

12141201

TreadRite™ Clear

1L

23060100

i90 Ink Marker Red

12141202

TreadRite™ Black

1L

23060101

TreadRite™ Yellow

1L

23060105

i90 Ink Marker Blue

12141203

TreadRite™ Clear

4L

23060400

iFine Ink Marker Black

12151001

TreadRite™ Black

4L

23060401

iFine Ink Marker Red

12151002

TreadRite™ Yellow

4L

23060405

iFine Ink Marker Blue

12151003

Product Description

$20.00*

$21.00*

Weight

Ref. Code

Zinc Guard™ Gloss Black

325g

230732301

Zinc Guard™ Gloss White

325g

230732311

Zinc Guard™ Signal Red

325g

230732302

Zinc Guard™ Deep Ocean

325g

230732303

Zinc Guard™ Cottage Green

325g

230732304

Zinc Guard™ Golden Yellow

325g

230732305

Zinc Guard™ Aluminium

325g

230732310

Zinc Guard™ Machine Grey

325g

230732313

Zinc Guard™ Flat Black

325g

230732101

Zinc Guard™ Flat White

325g

230732111

Product Description

11770CSS

Product Description

44

All prices include GST

TRADEQUIP the brand name in equipment

INDUSTRIAL PEDESTAL FAN 750mm BLADE Product #1015

WALL CABINET 1200mm

• 240/50Hz 380 Watt 3 Speed Motor

• • • • •

• 750mm Solid Steel 3 Blade Fan • Adjustable Height: 1235 to 1760mm (Blade Centre) • Cast Iron Base for Stability • 0º to 90º Oscillating Angle or Fixed • Air Flow: 300m3/min

380 WATT 3 SPEED MOTOR

TRADEQUIP

$149

• Metal Oscillating Gears • Nett Weight: 27.5kg

TRADEQUIP

$185

DEMOLITION HAMMER HEAVY DUTY - 1350 WATT

WALL MOUNTED FAN 750MM

Product #7133

• Input Power: 1350W

Product #1026

• 230V50HZ

• • • • • • •

• Impact Force: 45J

N EW !

0º to 90º Oscillating Angle or Fixed 240V/50Hz 380 Watt 3 Speed Motor 750mm Solid Steel 3 Blade Fan Heavy Duty Wall Fixing Plate Air Flow: 300m3/min Metal Oscillating Gears Nett Weight: 18kg

TRADEQUIP

$179

• Blows per minute: 1400min¯¹ • Lithium Based Grease • Standard accessories: Extra carbon brush 1 set, internal hexagonal wrench 2pieces: S5/ S6 each, oilcan with lubricating oil 1 piece, wrench 1piece, drill bit 1 piece

380 WATT 3 SPEED MOTOR

240V/50Hz/220 Watt 3 Speed Motor 450mm Steel 3 Wide Blade Fan Adjustable Flow Angle Nett Weight: 10kg

TRADEQUIP

$475

• Nett Weight: 15kg

SUPERFLOW FLOOR FAN 450MM Product #1045 • • • •

INDUSTRIAL RACK WITH INTERLOCKING WIRE DECKS Product #9093 • Welded End Frames • 4 Adjustable Shelves with Wire Decks • Bolt Free Design • Powder-coated Steel • Single Tool Assembly • Each Shelf Holds 907kg • Additional Racks can be added • 1953mm (wide) x 610mm (deep) x 1829mm (high) • Nett Weight: 82kg

220 WATTS

TRADEQUIP

$129

SINGLE TOOL ASSEMBLY

INDUSTRIAL VENTILATION FAN 300mm MULTI-BLADE FAN AIR VACUUM CLEANER Product #1025 • • • • • • •

240V/50Hz 520 Watt Motor 300mm Alloy Multi Blade Fan (3400rpm) Dimensions: 405(H) x 320(W) x 358(L)mm Air Delivery: 70m3/min Static Pressure: 490Pa Replacement 5M Flexible Tube: 1025/1 Nett Weight: 14kg

• With 5M of Flexible Tube (Flame Resistant)

Product #1011

Steel Construction 1mm Thick Sheet Steel Powder Coated Paint Finish • 3 Lockable Cupboards 2 x Adjustable Shelves & Peg Board with a Selection of Hooks Dimensions: 1200(L) x 600(H) x 200(W)mm Nett Weight: 26.1kg

TRADEQUIP

$349

TRADEQUIP

$395

Product #3049 Compact, lightweight industrial marine vacuum cleaner works on compressed air.

Cleans up water, oil and bottom sludge as well as dust and metal chippings.

Permits use of an ordinary 300mm diam. pail can to collect dust, waste and liquid.

Furnished with pail can, 2 metres of oil resistant hose, and oil stopper which automatically stops suction when full.

TRADEQUIP

$249 NEW!

520 WATTS

• Air consumption at 5kgf/cm²: 400 L/min • Hose: 32mm x 2M (oil resisting) • Suction nozzle: 32mm with 14mm • Vacuum (In water column): at 5kgf/cm²: 3000mm • Suction Capacity: at 5kgf/cm²: 2m³

WORKSHOP • INDUSTRIAL • AUTOMOTIVE • STORAGE • ENGINEERING • AND MORE

45

228PC Metric & AF Toolkit

• 3 Drawer Ute Box • High Density Foam Insert Trays • 1/4, 3/8 & 1/2’’ DR Socket Sets & Acc. • Adjustable Wrenches • Hex Key Set • Punch & Chisel Set • Various Pliers • Multigrips • Spanner Sets • Hammers • Screwdriver Set • Bit Set • Podger Bar • Plus Much More….

ATK803U

Gas Struts

Hammer Tone Paint Finish

Security Mechanism

Heavy Duty Handles

$1499 $1,750

Sealed Ball Bearing Roller Slides

109

$$109

12PC 1/2”DR IMPACT TORX BIT SET

• T10, 15, 20, 25, 27, 30, 40, 45, 50, 55, 60 & 70 113400

16PC 1/2”DR IMPACT SOCKET SET • Metric or AF • 10- 30mm11300M • 5/16 - 1-1/4”11300A • Pin + O-Ring • CR-MO

$ $119 each each

119

14PC 1/2”DR CROWSFOOT SPANNER SET • Metric or AF • 27- 50mm 11317 • 1-1/16 - & 2” 11318 • CR-MO

$ $285 each each

285

$270 $270

12PC 1/2”DR IN-HEX SET

8PC SPANNER SET

• Metric or AF • 6- 19mm 11324M • 3/16 - 13/16” 11324A • CR-MO

• 22, 23, 24, 25, 27, 30, 32, 36mm • CR-V A13339

$119 $119

$

1/2” DR IMPACT WRENCH

DIE GRINDER KIT

• Torque - 338Nm • 7,000 RPM • Weight - 2.38kg SM403

99.00 $99

• 1/4”DR Die Grinder • 1/4 & 1/8” Collets SM513

10PC 1/2”DR DEEP SOCKET SET

$ $119 each each

119

• Metric or AF • 10 - 24mm 11315 • 7/16 - 1” 11311 • CR-MO

$590 $590 3/4” DR IMPACT WRENCH • Torque- 200 - 1,200 Ft Lb • 5,500 RPM • Weight - 3.4kg SM454

$ $109 each each

109

99.00 $99

$

1/2” DR RATCHET

• Torque - 68Nm/ 50 Ft Lbs • 150 RPM • Weight - 1.1kg • Compact Head SM31

All Prices Include GST.

46

OX-T331203 OX-T331204

$45.00

All prices include GST

47

GP2600 Portable Generator

GP5000 Portable Generator

*208cc *50Hz *2.6kVA *OHV engine *Heavy duty never flat wheels

*389cc *50Hz *5.0kVA *OHV engine *Heavy duty never flat wheels

APN: 9345804001794 $749.00

APN: 9345804001800 $1399.00

GP6000E Portable Generator *420cc *50Hz *6.0kVA *OHV engine *Electric ignition engine

XP5600E Portable Generator

XP6400E Portable Generator

*407cc *50Hz *5.6kVA *OHV engine *Electric ignition engine

*407cc *50Hz *6.0kVA *OHV engine *Electric ignition engine

APN: 9345804001817 $1699.00

APN: 9345804001770 $2599.00

APN: 9345804001787 $2999.00

PWR2500 Power Washer

PWR3000 Power Washer

PWC3000 Power Washer

PWC4000 Power Washer

*196cc *2500/2.3 psi/gpm *7.62m hose length *OHV horizontal engine

*212cc *3000/2.7 psi/gpm *9.14m hose length *OHV horizontal engine

*212cc *3100/2.8 psi/gpm *10.7m x 1cm hose length **OHV horizontal engine

*420cc *4000/4.0 psi/gpm *15.25m x 1cm hose length *OHV horizontal engine

APN: 9345804001695 $599.00

APN: 9345804001701 $856.00

APN: 9345804001718 $1285.00

APN: 9345804001725 $1928.00

All prices include GST

$ 29.95

SJ-AVCLUB40

SJ-AVCLUB40 & 64 HAMMER - CLUB - ANTI VIBRATION

SJ-AVCLAW20 HAMMER - CLAW - ANTI VIBRATION - 20oz (566g)

$ 45.95 SJ-AVCLUB64

 Heat Treated, One Piece Head  Patented Anti-Vibration Grip  Riveted Grip for Extra Safety - Soft Feel Ergonomic Grip

 Heat Treated - One Piece Head  Patented Anti-Vibration Grip  Riveted Grip for Extra Safety - Soft Feel Ergonomic Grip

BOLT CUTTERS ALL SIZES

BOLT CUTTERS - SOLID FORGED - PROFESSIONAL

$ 39.95

$29.95

 Precision Machined Drop Forged Jaws - Adjustable Arms  Solid Forged Handles for Maximum Force between the Jaws  Non Slip Comfort Soft Grips - Built-In Stops for Added Safety  Ideal for Cutting:  High Tensile Steel rod  Concrete Reinforcing rods  Mesh & Wire  Cold Drawn Alloy Steel  Tempered Sprung Wire.

EC-EFBC14, 14 inch

$34.95

EC-EFBC18, 18 inch

$45.95

EC-EFBC24, 24 inch

$57.95

EC-EFBC30, 30 inch

$84.95 $124.95

EC-EFBC36, 36 inch EC-EFBC42, 42 inch

All prices include GST

SJ-SPY/500 SPRAYER PRESSURE 5 LITRE

 Strong Plastic

Body with Integral Funnel  Finger TipControlled Spraying Wand  Trigger Operated

$ 56.95

SKILLED STADIUM Sika Australia & AGM Fasteners Refurbishment & Grouting Requirements:

Solution:

First opened in 1941, Simonds Stadium (Kardinia Park) is the home of the AFL Geelong Cats. In 2012, a $35mil upgrade was undertaken to build a new Southern Stand to increase the stadium capacity.

As the local ‘Direct to Site’ supplier of Sika products, AGM Fasteners consulted with the contractors, engineers and the Sika Technical Department to determine the most suitable product for each application.

The new 11,000 seat grandstand structure was created using precast elements that were transported to site and installed like a massive jigsaw puzzle. Once installed the structure required approximately 16km of joint sealant, to seal between the precast elements.

Sikaflex-Pro was used for caulking the seating platforms.

Sikagrout-Ultra was used for underpinning the light towers.

Also part of the upgrade was the installation of light towers. These light towers were key to expanding the appeal of the venue, by opening it up to night AFL matches as well as domestic 20/20 cricket. To underpin the new towers, the project engineers required a structural grout, with high early and ultimate strength.

Sikaflex-Pro SikaGrout-Ultra

Products used:

Project Details: Date: January 2013 – June 2013 Location: Geelong Distributor: AGM Fasteners Sika Representative: John Shelton

49

AUSTRALIAN MADE POWDER PRODUCTS SikaGrout GP 20kg General Purpose, 54 MPa non-shrink Class A Grout

Sika Australia proudly manufacture a wide range of powder products from plants in NSW, QLD and newly in Victoria.

SikaGrout 212HP 20kg High performance and high flow, 75MPa nonshrink Class C Grout

With a wide range of grouts for a range of applications, you can be sure that Sika Australia will have the solution to your construction needs at every stage of the project.

SikaGrout 100 20kg High strength, 90MPa non-shrink Class C Grout SikaGrout 300PT 20kg High performance, zero aggregate grout for post tensioned structures

With Sika Grouts having been used recently on the refurbishment of Skilled Stadium in Victoria, and the ANZAC Bridge in NSW, you know that these grouts are tried and tested, and approved for use on some of Australias biggest landmarks.

SikaGrout Deep Pour 20kg Deep pour grout, up to 500mm thickness, 60MPa

For more information on these products,call your local CSS member for an obligation free quote.

SikaGrout HES 20kg High early strength grout, reaches 20MPA @ 2hours SikaGrout Ultra 20kg Ultra high strength, 100MPa non-shrink grout SikaGrout UW 20kg Cementitious, non-shrink grout for underwater applications, 75MPa

50

REVOLUTION

B8 COATING

Drills Faster Lasts Longer A revolution in corrosion protection and drilling performance Superior Drilling Performance Extreme Corrosion Protection

Superior engineering and ultra premium finish makes B8 the smart choice for your building project B8 technology is used in the aeronautical, aerospace and defence industries. Eight times harder than traditional galvanising, B8 provides superior corrosion protection, lasting up to 4 times longer.

Revolution B8 Coating has been independently tested in very severe marine test sites and certified to AS 3566.2 CL 5.4a (Outdoor Exposure Test) Established in 1965, Bremick Fasteners is Australia’s largest supplier of Industrial Quality Fastening Products.

PROUDLY AUSTRALIAN

FatMag Fun

Crossword clues DOWN 1. Inbred 2. Overturn 3. Wanderlust, ... feet 4. Hankers 5. Band member 6. Prying (into) 10. Facts 11. Heavy drinker 12. Gallivant (about) 13. Keyboard mistake 14. Part of an archipelago 15. Bigotry 16. Deep blue pigment 17. Arctic person 18. See (to) 19. Hillocks 20. Classic art subjects

© Lovatts Publications Pty Ltd

ACROSS 1. Adulteration 5. Hock (goods) 7. Nominate 8. Mimes 9. Slightly drunk 12. Skimpy underwear (1-6) 15. Arrived at 19. True 21. Belief in perfection 22. Cat’s-paw 23. Thaw 24. Fixated

Solutions on page 58

The floating church There are folk so taken up with the moment when in church they could swear the whole building is floating. Of course, it’s nothing supernatural that is propping up this 130-year-old Provo Tabernacle, which was gutted by fire back in 2010.

Instead of demolishing the whole building, the residents decided they wanted to save the exterior of the 130-year-old building, so they placed the entire seven million pound structure onto 40-foot-high steel stilts.

The builder’s plan was to build a new temple within and underneath the original. The decision to restore was driven by the history of the temple in Provo, which is the third largest city in the USThe floating church in Utah—more engineering help than divine. state of Utah. The stilts the temple are resting on are 40 ft high, and are being ‘We are tracking it carefully — every day,’ Kirby said. ‘We described by Mormon church leaders as a “miracle” of modern can see an issue before it becomes a problem, and we can engineering. make adjustments.’

“People are amazed when they see the construction site,” A concrete wall was inserted on the inside of the brick, givproject manager Andy Kirby told an English newspaper. “They ing the building more stability and strength than it had when it haven’t seen anything like it before. They just say it doesn’t was completed in 1898. look real and are just amazed that we can do that, that we can With a stable exterior, crews then installed the stilts and lift a building up with the piles like that.” excavated the soil around the stilts 40 feet below the buildings Monitors and load sensors are being employed so engineers base. can be constantly aware of any changes in elevation or materiThe project is expected to be completed in 2015.  al stress, no matter how slight.

Construction Supply Specialists

51

FatMag Fun

Puzzle Experts FILL IN 5 LETTERS Above Crone Evade Flare Given Glove Haven Heave Louts Messy Nudes Organ Paged Prone Rafts Rends

Rouge Rusts Scent Scram Seamy Shown Sighs Snags Spent Split Style Suede Super Teeny Timed Unlit 7 LETTERS Biplane Eddying Lacquer Reliant

© Lovatts Publications Pty Ltd

Place all the words listed into the grid. Each word can be used once only. The first word has been filled in.

Solutions on page 58

Where great wall of china meets the sea.

Well, it had to end somewhere. One of the more interesting places to visit The Great Wall of China—the world’s largest military structure—is where it meets the Bohai Sea near Shanghaiguan in Qinhuangdao City about 300 kilometers east of Beijing. This is where The Wall starts (or ends depending on how you look at it) and from here it stretches to Lop Lake in the west, along an arc that roughly delineates the southern edge of Inner Mongolia – a length of approximately 8,850 km.

Solutions on page 58

52

Construction Supply Specialists

53

$19.00 $22.00

$55.00 $15.00

$9.90 $13.50 $13.50 $31.00 $45.00

$9.90 $13.50 $13.50 $66.00 $85.00

$9.90 $13.50 $13.50

Molabolt Peg Anchor

54

– Solving The Problem Of Blind Applications In Steel Construction

16mm

Drill 16mm

m

Application • Hollow steel sections • Plate steel sections • In primary and secondary 16mm steel work • Can be used in areas where Drill 16mmcommon rivets are unsuitable • Ducting, cladding, pipeline etc.

Molabolt Peg Anchor Fitting Guide Example 16mm

16mm

Drill 16mmDrill 16mm

1

2

1. Locate nut at top of stud 2. Insert into hole, allowing slotted section to pass through hole 3. Strike pin home 4. Torque to ABS recommendations.

Mola Peg Anchor

Mola Peg Anchor Guide pass through hole Fitting Fitting Guide 1. Locate nut at top of stud

Note: Care should be taken not to impact pin until bolt is fully home

Size

Grade

Finish

M8 x 50

8.8

Zinc / Clear

M10 x 50

8.8

Zinc / Clear

M12 x 60

8.8

M16 x 60 M20 x 75

3

4

Mola Peg Anchor Mola Peg Anchor Fitting Guide Product Clamping Range Fitting Guide

Tensile

Code (KN) 1. Locate nut at top of studnut at top of stud 1. Locate Min (mm) Max (mm) 2. Insert into hole, allowing slotted section toslotted pass through 2. Insert into hole, allowing sectionhole to pass through hole 3. Strike pin home 3. Strike pin PA0850 5home 34 20 4. Torque to ABS recommendations 4. Torque to ABS recommendations

Single Shear (KN)

Torque

22

20

PA1050

5

30

32

30

35

Zinc / Clear

PA1260

7

36

49

49

50

8.8

Zinc / Clear

PA1660

7

32

75

75

100

8.8

Zinc / Clear

PA2075

7

35

110

120

125

Please Note: all SWL tensile figures require a safety factor loading of 5:1 based on ultimate load results. Ultimate Load Testing has been carried out by independent UKAS accredited laboratories.

Please Note: all SWL shear figures require a safety factor loading of 1.5:1 based on independent UKAS laboratory accredited

2. Insert into hole, slotted 1. Locate nutallowing at top of stud section to pass through hole test data.

3. Strike pin home 2. Insert into hole, allowing slotted section to pass through hole 4. Torque to ABS recommendations 3. Strike pin home

4. Torque to ABS recommendations

24” HARD BRUSH BROOM 24” HARD

33.00 $ 33.00

$

BRUSH BROOM

BH24SH

BH24SH

24” SOFT BRUSH BROOM 24” SOFT BS24SH BRUSH BROOM

33.00 $ 33.00

$

BS24SH

24inch Soft fibre broom, complete with hasp and staple for extra strength.

24inch Soft fibre broom, complete with hasp and staple Perfect broom for heavy floor cleaning. for extra strength.

24” Wooden Head Perfect broom for heavy floor cleaning.

PVC Soft Bristles 24” Wooden Head 25mm x 1.5m Wooden Handle with Alloy Screw head.

PVC Soft Bristles 25mm x 1.5m Wooden Handle with Alloy Screw head.

24” AlUMiniUM SQUEEGEE 24” AlUMiniUM S24SHSQUEEGEE

39.50 $ 39.50

24inch Hard fibre broom, complete with hasp and staple for extra strength.

24inch Hard fibre broom, complete with hasp and staple Perfect broom for yard work and heavy clean up. for extra strength.

24” Wooden Head Perfect broom for yard work and heavy clean up.

PVC Hard Bristles 24” Wooden Head Metal Frame PVC Hard Bristles 25mm x 1.5m Wooden Handle with Alloy Screw head.

Metal Frame 25mm x 1.5m Wooden Handle with Alloy Screw head.

24” BROOM wiTH SQUEEGEE 24” BROOM wiTH SQUEEGEE

SB24SH

41.25 $ 41.25

$

SB24SH

$

S24SH

24inch Aluminium Squeegee, complete with handle.

Neoprene Rubber Resists Chemicals & Solvents 24inch Aluminium Squeegee, complete with handle.

25mm x 1.8m Handle.

Neoprene Rubber Resists Chemicals & Solvents 25mm x 1.8m Handle.

24inch Squeegee broom.

Multipurpose broom used to clean up either water 24inch Squeegee broom. or rubbish.

Multipurpose broom used to clean up either water 24” Hard plastic head or rubbish.

PVC Hard Bristles 24” Hard plastic head Metal Frame PVC Hard Bristles 25mm x 1.5m Wooden Handle with Alloy Screw head.

Metal Frame All prices include GST 25mm x 1.5m Wooden Handle with Alloy Screw head.

55

Designed by Tradies, for Tradies.

SAFETY BOOT

These Safety Boots have been made to meet not only the Australian Standards in foot protection, but also designed to meet the Construction / Builders Workers regulation in regards to foot protection.

boot upper Impact-A boots are made out of the best Nubuck water resistant leather.

Fully lined with anti-bacterial and breathable anti-abrasive cambrille lining.

top cap

insole

Kevlar Toe Cap meets the Australian & New Zealand Standards.

Shock absorbing with multi-gel points for longer superior comfort.

Both styles available in Black and Tan.

kevlar midsole Flexible reinforced Kevlar midsole. Protects foot from sharps piercing through.

AS/NZS 2210:3

boot sole Dual Density anti-slip, acid-resistant, anti-abrasion PU/TPU outer sole. Includes heel energy absorption system.

56

Epirez Concrete Repair

®

EPIREZ® Multi-Purpose Epoxy Concrete Repair • • •

EPIREZ® Highway Patch • • •

Multi purpose economical cement repair mortar Non-shrink high early strength Pea gravel can be added Product Code:

E991605

Package Size:

15kg

ITW Polymers and Fluids is proud of its portfolio of brands; Epirez, Galmet, Molybond, Rocol & Devcon.

For fast high strength concrete repair Multi purpose epoxy concrete repair & adhesive Easy to mix and cleans up in water Product Code:

E992251, E992250

Package Size:

3kg, 12kg

57

Concrete Anchors

WERCS

™

AnkaScrew

™

• • •

Ideal for close-to-edge and close-to-anchor installation Ideal for either temporary or permanent anchoring WERCS “sawtooth” thread Assists Anti-Rotation under load Patented WERCS “sawtooth” thread design provides clearance for rapid removal of material

DynaBolt

™

• • •

Ramset’s unique elliptical cut-out sleeve provides pull down onto the fixture and induces a clamp load.

The DynaBolt™ Plus has a patented expansion sleeve that will close a gap of up to 5mm during installation.

Choose from 8 different head types Patented Expansion Sleeve provides “pull-down” onto fixture

• • •

TruBolt

™

Heavy duty, true-to size stud anchor.

Maximum shear capacity for hole size Anchor design reduces slip when used in low strength concrete

The anti-rotation expansion sleeve is designed to grip the sides of the hole, preventing anchor rotation during installation.

QUALITY T N E M IP U Q E P O H S K R O W

58

20040PA 200L Diesel Fuel Storage & Dispensing Kits • Delivers flow rates of up to 50L/min • Polyethylene tank cannot dent, scratch or corrode • Tank baffles aid vehicle stability • Tank dimensions: 800mm (W) x 800mm (D) x 635mm (H)

.

1,176 00

$

401A Ryton Rotary Drum Pump • Flow rates of up to 20 L/min • Ryton and stainless steel construction provides excellent chemical compatibility • Suitable for the transfer of low viscosity chemicals, lacquers and mild acids • Suitable for 60L or 205L drums

.

199 00

$

SAW100 Air Hose Reel • PVC hose • Impact resistant UV stabilised covers • Can be mounted on the wall or ceiling • 3/8" BSPT inlet/outlet • Detachable steel mounting bracket enables 180º hose reel rotation • 16m x 10mm ID hose & 0.9m lead in hose

$

.

405 00

G10020N EL Series 450g Lever Action Grease Gun • Grease pressures of up to 8,000psi (552bar) • 500g capacity when using bulk grease • Three way loading • Includes a 150mm long grease rigid extension and heavy duty four jaw coupler • 12 monthy warranty

$

$

.

25750

.

35 00

AS1090 Air Hose Reel • 30m x 3/8" ID hybrid polymer hose • 200psi (14bar) maximum operating pressure • 3/8" inlet/outlet • Dimensions: 420mm (L) x 375mm (W) x 390mm (H)

$

.

4190

8828N2 20L Gear Oil Drum Pump • Delivers up to 110mL per stroke • Complete with a Reike adaptor & down tube extension • Transfer of engine, gear, diff & hydraulic oils • Drainback nozzle holster • UV stabilised long life hose *Applies to the vast majority of Alemlube products

All prices include GST

FatMag Fun Solutions Solutions to the puzzles on pages 51 and 52

FN65RHS Fusion RH Series Bradder 32-65mm • Cordless • 18v Li-Ion Battery incl.

• Multi-Position Control switch • Nose mounted LED

$1,095.00 FN65DA Fusion DA Series Bradder 32-65mm • Cordless • 18v Li-Ion Battery incl.

• Multi-Position Control switch • Nose mounted LED

SCN49 Senco Coil Nailer 32-65mm • Magnesium body • Adjustable trigger • No-mar pad • Multi-directional exhaust

$1,095.00

$690.00 SFN30 Senco DA Series Finish Nailer 32-50mm • Adjustable exhaust • EZ-Clear magazine • No-mar pad • Soft grip

SN951XP XtremeProTM 951 Framing Nailer 50-100mm • Rear two-step loading • Patented drive selector • Aluminium housing • Adjustable depth of drive

$660.00

$650.00

FIP32 ProSeriesTM C Series Bradder 32-63mm • Adjustable exhaust • Soft grip • EZ-Clear magazine • Belt hook

$320.00

$699.00

COLT

The ORIGINAL Orange Tank Trade Compressor Range

$399.00

$549.00

COLT 265 - 2.0HP COLT 285 - 2.5HP Twin Tank Carry Twin Tank • 16L twin tank • 16L twin tank • Direct drive • Direct drive • Easily portable • Able to be stored under • 7.6 CFM or 217 L/min standard ute cover • 12 month warranty • 8.7 CFM or 246 L/min • 12 month warranty

*All prices inclusive of GST

$569.00 COLT 282 - 2.5HP • 50 L tank • Direct drive • Incl. Filter regulator • Steel valve plates • Oil lubricated • 8.3 CFM or 235 L/min • 12 month warranty

$699.00

COLT 312 - 2.0HP • 50 L tank • Belt drive • Incl. Filter regulator • Steel valve plates • Oil lubricated • 12.2 CFM or 345 L/min • 12 month warranty

All prices include GST

59

P R O V E N

P R O D U C T

P E R F O R M A N C E

F R O M

SERIOUSLY POWERFUL STUFF! PURE150-PRO by POWERS Heavy Duty • Low Odour • Low VOC Content

PURE EPOXY ADHESIVE ANCHOR Guns out red for easy on-site inspection

PURE150-PRO is suitable for use in • Seismic Design • Diamond Cored Holes • Drinking Water Systems • Pick-Proof Applications • Underwater & Overhead Applications