Best Manufacturer of compression limiters, inserts, machined parts – GTB COMPONENTS Compression Limiters are plain hole metal inserts designed for use in powder metal moulding insert components. It is used where a compressive load is applied to a plastic assembly. It provides clearance of bolts, while the wall of the compression limiter with stands the compressive force induced during the assembly operation of any small or big mating screw/ bolt. Normally, compression limiters are installed in the factories using simple cold press assembly scheme. The compression limiter strengthens the plastic and resists the load that is applied when a bolt is tightened in any type of assembly. The reliability of the plastic is not compromised by the load that is applied. At GTB Components, In order to estimate your requirement we need either a detailed graph or drawing with the following information needs to be completed to one of the forms provided for each design type:
Design Type for powder metal moulding insert Material Type Part Length Inside Diameter (ID) Outside Diameter (OD) Installation Method (With detail) Plating or Finish if required at the end
Starting with an analysis of your needs and objectives, our application engineers determine the best GTB COMPRESSION LIMITER for the application. We also deals in Powder Metal. Contact our team today to get the conversation started.