Klauke brochure crimping tool K507WF (EN)

K 507 WF – CRIMPING TOOL FOR CABLE END SLEEVES The solution for everyone who wants to crimp wire ferrules quickly and easily Klauke.com

CRIMPING TOOL FOR WIRE FERRULES WITH OPTIMAL PULL-OUT VALUES

K 507 WF crimping tool with square pressing process for wire ferrules

• Large cross-section range of 0.5 - 50 mm² • One crimping profile for all standard cables • Fast and easy replacement of crimping inserts • Fewer crimps needed thanks to the optimum die width • Ratchet mechanism to ensure full jaw closure • Adjusting disc to compensate for natural tool wear Crimping die for twin cable end sleeves available as an option Technical data Length

220 mm

Weight

0,66 kg

Crimping dies AE5071 for wire ferrules 0,5 - 6 mm²

Follow us!

AE5072 for wire ferrules 10 - 25 mm²

AE5073 for wire ferrules 35 - 50 mm²

ZAE5072 (Optional) for twin wire ferrules 2 x 6 - 2 x 16 mm²

Get all the latest information on products, services, and special offers.

Subscribe to our Newsletter: KLAUKE.COM/NEWSLETTER

Gustav Klauke GmbH Auf dem Knapp 46 D-42855 Remscheid

Tel.: +49 (0) 2191 / 907 - 0 Klauke-Info@Emerson.com Klauke.com

© 2022 Gustav Klauke GmbH. All rights reserved. Subject to change without notice. The Emerson logo and Klauke logo are registered trademarks of Emerson Electric Co. in the U.S. and other countries. FLK507WFGB 3.000 06/22

The decisive advantage of the K 507 WF is the very good pull-out values. Whether stranded flexible or super-flexible conductors, thicker or thinner real cross-sections - this tool cover everything. The width of the crimping dies is also designed in such a way that most wire ferrules only have to be crimped once.