Arnold Motor Supply PBE Catalog

PBE

PAINT, BODY & EQUIPMENT

VOLUME 1

SPRAY GUNS & ACCESSORIES

SATAJET® X 5500 SPRAY GUNS

• The atomization of the X nozzles sets new standards

• Whispering nozzle due to optimized flow geometry

• Optimized material distribution for enhanced spraying uniformity and atomization with both spray fan shapes

• No air distribution insert required

• Constant fan size across the entire nozzle spectrum with regular increases of the material flow rate

• Considerable material savings with the same application method

SAT1061895

SAT1061902

SAT1061887

SAT1061910

SAT1061928

SAT1061936

SAT1061944

SAT1061952

SAT1061960

SAT1061978

SAT1061548

SAT1061556

SAT1061564

SAT1061572

SAT1106534

SAT1061580

SAT1061598

SAT1061605

SAT1061613

SAT1106550

PPS 2.0 Gun Adapter MMM26135 Fluid Tip Seals (5 pack) SAT140582 Maintenance Kit SAT1173286

*Converts to work with 3M PPS Series 2.0

SAT1062009

SAT1061986

SAT1062017

SAT1062041

SAT1062059

SAT1062083

SAT1062091

SAT1062132

SAT1062140

SAT1062174

SAT1061639

SAT1061655

SAT1061704

SAT1061738

SAT1109976

SAT1061770

SAT1061796

SAT1061811

SAT1061837

SAT1109968

SPRAY GUNS & ACCESSORIES

SATAJET X 5500 PHASER

• Exclusive spray gun – developed in cooperation with Porsche Design Studio

• Unusual design – combined with high-quality materials and detailed solutions

• Revolutionary, economical, quiet, consistent – technically identical to the top model SATAjet X 5500

NOZZLE SETS

*Converts to work with 3M PPS Series 2.0

SATAJET 5000 B

• Flexible application: Optimized nozzle concept for various spray distances and inlet pressures

• Ergonomic design: Pleasant and compact handle shape combined with easy-to-operate control elements

• Easy cleaning: PerloxalTM surface for improved corrosive properties and even easier cleaning and maintenance

• Fast assembly: The paint needle can be mounted easily, safely and quickly thanks to the positionally secure clip roller

• Fine adjustment: Optimized round / flat spray fan control with a half turn

SATAJET 1500 B SOLV SPRAY GUNS

• For use in the full system – solvent-based base coats, sealing or clear coats

• Precise – uniform spray structure

• Enhanced air pressure range – from 7 to 26 PSI

• Fast working speed

• Anodized gun body in blue

SATA MINIJET® 4400 B

• Small and compact: Particularly suitable for smaller areas or hard to reach places

• Special spot repair nozzle sets for minor damage repairs to vehicles

• Low maintenance, self-adjusting air piston and paint needle packings

PPS 2.0 Gun Adapter MMM26135

Fluid Tip Seals (5 pack) SAT140582

Distribution Rings (3 pack) SAT143230

Maintenance Kit SAT1173278

SATAJET 100 B SPRAY GUNS

• Fine atomization even at low inlet pressure

• Low overspray

• Pressure adjustment from 7 to 26 PSI is possible

• Smoothly polished, ergonomically optimized gun body

• QCC cup connection

• Self-adjusting sealings

100 B HVLP SPRAY GUNS

SAT1012674 SAT1012682 SAT1012690 (100 BF) SAT1012707

PPS 2.0 Gun Adapter MMM26137

Fluid Tip Seals (5 pack) SAT199455

Distribution Rings (3 pack) SAT197467

Maintenance Kit SAT1047100

PPS 2.0 Gun Adapter MMM26135

Fluid Tip Seals (5 pack) SAT140582

Distribution Rings (3 pack) SAT143230

Maintenance Kit SAT1047100

SPRAY GUNS & ACCESSORIES

SATA ADAM 2 DOCKS & PSI DISPLAYS

• Converts any non-digital spray gun to digit cost-efficiently

• Precise setting and display of the inlet pressure to ensure perfect color match

• Displays can be attached and removed in no time at all

• Battery can be replaced to extend battery lifetime

SATAminijet 3, 4, 3000 B, 4400 B, 1000 K, 1000 H

SATAminijet 3, 4, 3000 B, 4400 B, 1000 K, 1000 H

SATAjet X 5500, SATAjet 5000 B & 5000 Phaser

SATAjet X 5500, SATAjet 5000 B & 5000 Phaser

DEVILBISS® DV1 CLEARCOAT HVLP SPRAY GUN

• Produces an even distribution of fine clearcoat spray, uniformly sized particles that easily wet-up a surface and flawlessly hang on vertical panels

• Delivers higher application speeds at lower pressures, enhancing the overall productivity and efficiency of the gun

• Easy to set-up and easy to use — painters of all levels are able to move quickly and efficiently while replicating nearly any finish virtually effortlessly

• Features a quieter application experience from a soft-spraying gun, ultimately making the DV1 more enjoyable to use

DEVILBISS DV1 BASECOAT HVLP SPRAY GUN

• A new basecoat spray gun body featuring a reduced profile and a smoother, streamlined design

• An improved air and fluid management architecture that produces a perfectly balanced and consistent spray pattern

• The DV1-B PLUS HLVP air cap that delivers high efficiency performance at HVLP pressures

• Integrated digital gauge

• A fluid tip design enabling painters to tackle a broad range of coating types and flow rates in all climatic conditions

AND LS SERIES II SPRAY GUNS

• Designed according to the most innovative Spray Painting Technologies for the atomization and application of paints of all types utilizing compressed air

• WS-400 and LS-400 Series2 Premium Spray guns available satisfy the demands of the application in the Automotive sector.

• Complies with 2014/34/EU Directive relating to equipment and protective systems intended for use in explosive potentially atmospheres

SPRAY GUNS & ACCESSORIES

SATA RPS ADAPTERS

Part#

SAT125211

SAT125237

SAT125252

SAT125278

SAT125294

SAT126326

SAT133595

SAT133827

SAT135111

SAT135798

Description

No. 1 with QCC, M 16 x 1.5 (female thread)

No. 2 with QCC, M 16 x 1.5 (male thread)

No. 3 with QCC, 3/8” (male thread)

No. 4 with QCC, 1/4” (male thread)

No. 5 with QCC, M 12 x 1 (male thread)

No. 6 with QCC, 3/8” (male thread)

No. 7 with QCC, M 12 x 1.5 (male thread)

No. 8 with QCC, G 3/8”-18( female thread)

No. 9 with QCC, G 3/8” male thread -18 NPSF

No. 10 with QCC, M 10 x 1 (male thread)

3M PPS SERIES 2.0 ADAPTERS

16mm Female, 1.5mm Thread

12mm Female, 1.0mm Thread

12mm Male, 1.5mm Thread

MMM26007

MMM26008

MMM26015

MMM26016 MMM26017

MMM26018 MMM26022 MMM26053

MMM26046 MMM26102 MMM26111

MMM26054 MMM26103 MMM26104

MMM26105

MMM26106

1/4” Male, 19 Thread BSP

3/8” Female, 18 Thread NPS

12mm Male, 1.0mm Thread

16mm Male, 1.5mm Thread

1/4” Female, R-Angle 19, Thread BSP, Side Cup Mount

3/8” Male, 18 Thread NPS

10mm Male, 1.0mm Thread

7/16” Male, 14 Thread UNC

3/8” Male, 19 Thread BSP

3/8” Female, 19 Thread BSP

1/4” Female, 19 Thread BSP

3/8” Female, 18 Thread NPS

3/8” Female, 19 Thread BSP

1/8” Male, 27 Thread NPSM

14mm Female, 1.0mm Thread

8mm Male, 0.75mm Thread

Part# Description

SAT150136

SAT150151

SAT164608

SAT188664

SAT193276

SAT215079

No. 13 with QCC, M 16 x 1.5 (male thread)

No. 14 with QCC, M 11 x 1 (male thread)

No. 15 with QCC, 7/16” - 14 UNC

No. 18 with QCC, M 18 x 1.5 (female thread)

No. 19 with QCC, 1/8” (male thread)

No. 20 with QCC, 1/4” (male thread)

FOR SATA SPRAY GUNS

Part# Description

SAT188292 SAT188318

MMM26109

MMM26110

MMM26116

MMM26118

MMM26119

MMM26120

MMM26126

MMM26127

MMM26136

MMM26128

MMM26129

MMM26130

MMM26132

MMM26135

MMM26137

MMM26138

MMM26139

No. 16 with QCC, G 3/8” (female thread)

No. 17 with QCC, G 1/4” (female thread)

1/4” Female, 18 Thread NPS

1/4” Female, R-Angle, 18 Thread NPS, Side Cup Mount

1/4” Female, 19 Thread BSP

11mm Male, 1.0mm Thread

16mm Male, 1.5mm Thread

17.5mm Female, 19 TPI Thread

5/8” Female, 18 Thread NPS

1/8” Male, 28 Thread BSP

18mm Female, 1.5mm Thread

1/8” Female, 27 Thread NPT

3/8” Female, 18 Thread NPS

16mm Female, 1.5mm Thread

Stretched

5/8” Male, 11 UNC Modified

Trapezoidal Thread

Trapezoidal Thread - QCC

3/8” Female R-Angle, 19 Thread BSP

1/4” Male, 19 Thread BSP

3MTM PERFORMANCE SPRAY GUN

• Works with HVLP pressure- and gravity-fed nozzles as well as 3M Performance Fine Finish Spray Heads

• Easy-change, replaceable nozzles range from 0.9 to 2.0

• Includes a 3M Performance Spray Gun and an air control valve

• Lightweight, impact-resistant body made from advanced composite material

• Designed for comfort

• Quickly converts between pressure-fed systems and gravity-fed 3M PPS Series 2.0 Spray Cup System

• Simple, innovative design means fewer parts to maintain or rebuild

3M PERFORMANCE SPRAY GUN SYSTEM

• Precision spray performance with excellent transfer efficiency and large, adjustable fan pattern

• Sprays a full range of automotive coatings

• Faster clean up and change overs that can help improve your cycle times

• Lightweight, impact-resistant spray gun body

• Quick-change, replaceable atomizing heads connect directly to 3M PPS Series 2.0 Spray Cup System

• Quickly converts between pressure-fed systems and gravity-fed 3M PPS Series 2.0 Spray Cup System

• Intuitive, ergonomic design for enhanced comfort

3M PERFORMANCE INDUSTRIAL SPRAY GUN SYSTEM

• Lightweight, impact-resistant body made from advanced composite material

• Designed for comfort

• Convert between pressure-fed whip hose and 3M PPS Series 2.0 Spray Cup System

• Simple, innovative design means fewer parts to maintain or rebuild

• Quick-change, replaceable nozzles ranging from 1.1 to 2.0

SPRAY GUNS & ACCESSORIES

3M PERFORMANCE PRESSURE HVLP

ATOMIZING HEAD REFILL KIT

Quick-change nozzles for spraying an industrial and automotive coatings with the 3M Performance Spray Gun. Delivers like-new spray performance with each new atomizing head. Exceptional pattern control, atomization and transfer efficiency.

PRESSURE HEAD GRAVITY HEAD

MMM26811

MMM26814

MMM26830

MMM26620

MMM26712

MMM26713

MMM26714

Pressure Head - Yellow 10 Pack

Pressure Head - Orange 10 Pack

Pressure Head - Variety 5 Pack

Pressure Head - Red 10 Pack

Gravity Head - Blue 5 Pack

- Green 5 Pack

- Orange 5 Pack

3M PPS SERIES 2.0 SPRAY CUP SYSTEM

Highest performing disposable spray cup system for mixing/measuring, filtering, spraying in any direction (360° spray rotation) and protecting coatings not in use. Redesigned adapters provide four points of connection from spray gun to lid, improving stability and confidence especially in large applications.

MMM26914

LID AND LINER KITS

LIDS

3M PPS SERIES 2.0

VENTED SPRAY CUP SYSTEM

Delivers the consistent flow you expect from a vented cup system. With pre-installed vents and the built-in filters in the lids there’s no assembly like some other brands’ vented cup kits. Once attached to a spray gun and in use, the vent valve is marked with large, easy-to-see icons clearly indicate whether the vent is open or closed. Also available in UV to Protects daylightsensitive materials like UV-cured primers, sealers, base and clear coats.

LIDS

SPRAY GUNS & ACCESSORIES

SATA RPS MULTI-PURPOSE CUPS

• Bendable - allows the painting of sill areas or wheel arches “overhead”

• Stable - due to the screw connection between cup and lid, the cup always remains on the lid and gun even when touching obstacles

• Easy removal of the lid in case of emergencywithout soiling the working area

• Clean unscrewing of the cup - by pressing in the cup, a depression is created which empties the material channel when pulling the trigger

• Constant material flow - helps the painter to achieve perfect coating results

• Very fast color changes - cleaning becomes a minor matter

SAT1010389

SAT1010397

SAT1010438

SAT1010488

SAT1011973

SAT1011981

300 ml (0.30 l), 125 micron, flat sieve

300 ml (0.30 l), 200 micron, plug-in sieve

600 ml (0.60 l), 125 micron, flat sieve

600 ml (0.60 l), 200 micron, plug-in sieve

900 ml (0.90 l), 125 micron, flat sieve

900 ml (0.09 l), 200 micron, plug-in sieve

SATA LCS LINER CUP SYSTEM

• Suitable for all SATA spray guns with QCC connection, no adapter required

• Particle-free: the premium strainers

• Lid with safety lock

• Liner (inner cup) made of extra-soft and thin material for smooth, even paint flow

• Highly transparent hard cup (outer cup) with complete and detailed scale system for easy mixing; upside-down scale shows the remaining quantity when painting

• Available in 3 cup sizes: 0.40 liter, 0.65 liter and 0.85 liter

SAT1195818

SAT1195826

SAT1195834

SAT1195850

SAT1195868

SAT1195876

ml (0.40 l), 125 micron, flat sieve

400 ml (0.40 l), 200 micron, flat sieve 650 ml (0.65 l), 125 micron, flat sieve 650 ml (0.65 l), 200 micron, flat sieve

3M PPS DISPENSERS

A wall-mountable unit that stores and dispenses lids and liners for the 3M PPS (Legacy) paint preparation system readily available. Conveniently dispenses supplies one at a time, keeping the remaining supply clean and safe from contamination.

SATA DRY JET 2

Significantly shorten the flash-off and cabin occupancy times. Uniform, wide air flow generated in the injector zone of the wide spray nozzle contributes to a reduction in flash-off time. Approx. 15% higher drying performance compared to commercially available models.

*Lids and liners not included

SATA DISPENSER STORAGE RACK

Compact and lightweight design, high strength steel hardware, durable polyester construction storage rack holds up to three RPS cup boxes.

200 Micron Filter SAT1024257 Filter Holder SAT222232

WALCOM FAN JET

Gun for drying at 70° of the continuous flow base, equipped with air regulator.

Part#

SAT217489

SPRAY GUNS & ACCESSORIES

PREVAL® COMPLETE SPRAY GUN

Sprayer with 6 oz. glass jar 16 oz. Replacement

3M SQUEEZE BOTTLE

DEVILBISS CLEAING BOTTLE

SATA SQUEEZE BOTTLE

SATA NOZZLE CLEANING NEEDLES

• Fits in small space cleaning needles. Pack of 12.

SATA CLEANING SET

• 2 cleaning brushes

• 12 cleaning needles

SATA CLEANING BRUSHES

• One-sided Cleaning Brush

• Pack of 10

S & G TOOL AID® SPRAY GUN CLEANING KIT

• 5 Different cleaning brushes

• Pick probe

• 5 Wooden picks

• Container of gun lube

S & G TOOL AID BRUSH SET

• 0.0625”, 0.094”, 0.125”, 0.156” & 0.187” Diameter Brushes

• For gun orifices

UNI-RAM GUN CLEANER TOOL KIT

Ideal kit for cleaning all types of spray guns including suction, gravity, pressure feed, detail, and HVLP, as well as airbrushes. Includes 12 different brushes and 8 needles to clean removable spray gun components.

SATA CLEAN AND CARE SET

Cleaning and care set for spray guns. Contains the necessary parts for cleaning and maintaining spray guns.

• One large cleaning brush

• Five medium cleaning brushes

• Five double-sided cleaning brushes

• Twelve nozzle cleaning needles

• One 100 ml high-performance grease

SATA GUN GREASE

Specially formulated for use on equipment that is in contact with paint. Does not contain silicones, acids or petroleum distillates is essential to keep your equipment at peak performance!

GLOBAL FINISHING SOLUTIONS® SINGLE GUNHANGERTM MAGNETIC SPRAY GUN HOLDER

Magnetic spray gun holder designed to hold all types of spray guns and most types of air tools. Help reduce clutter in your paint booth by keeping tools off the ground.

GLOBAL FINISHING SOLUTIONS 4 GUNHANGER

MAGNETIC SPRAY GUN HOLDER

Magnetic, four-position spray gun holder, designed for paint booths, prep areas or paint mix rooms. Comes equipped with a hook for storing tape, gloves, tack cloth or other commonly used supplies. Keep objects off the floor and avoid clutter in your workspace.

GLOBAL FINISHING SOLUTIONS HOSE & GUNHANGER MAGNETIC SPRAY GUN HOLDER

Magnetic air hose hanger and double spray gun holder, designed for paint booths, prep areas or paint mix rooms. It comes equipped with a hook for storing tape, gloves, tack cloth or other commonly used supplies. Spend more time working and less time worrying about clutter slowing down your operation.

SPRAY GUNS & ACCESSORIES

GLOBAL FINISHING SOLUTIONS

BOOTHBOX MAGNETIC CABINET & SPRAY GUN HOLDER

Magnetic, double-compartment cabinet and double spray gun holder, designed for the interior of paint booths. Store commonly used supplies including tape, gloves, and tack cloth within arm’s reach, enabling you to increase productivity while eliminating time-consuming trips in and out of the booth.

GLOBAL FINISHING SOLUTIONS BOOTH

SHELF WMTM MAGNETIC SPRAY GUN HOLDER & STORAGE SHELF

Magnetic, three-position spray gun holder with vented storage shelf. Can be used in a paint booth, prep area or paint mix room to hold spray guns, tape, tack cloth and other supplies, so you can spend more time on repairs and less time trekking in and out of the booth.

Part# Specs

GFS218-009 14” x 10” x 8.5”

INNOVATIVE MULTIPLE MAGNETIC SPRAY GUN HOLDER

Securely holds up to 7 Spray Guns

INNOVATIVETM MAGNETIC SPRAY GUN HOLDER

GFS218-002

GFS218-006

INNOVATIVE SPRAY GUN CABINET DELUXE

The door is designed to flip up and stay out of your way, and the digital cabinet lock will keep expensive spray guns safe and secure.

UNI-RAM SPRAY GUN CLEANER

• Self-contained, portable, and economical

• Cleans one gun and pot at a time

• Swirl action jet system provides a powerful, yet gentle cleaning action

• Diaphragm pump provides a consistent flow of cleaning solution

• Minimum air pressure: 85 PSI at 2 CFM – clean, dry air only; built in pressure regulator (set to 85 PSI).

• Cleans solvent borne paint from spray guns and cups: gravity, siphon, pressure.

• Shipping Dimensions (WDH): 17″ x 16″ x 44″ (43cm x 41cm x 112cm)

• Product Weight: 45 lb

• Product Dimensions (WDH): 14.3″ x 13.6″ x 40.6″

• CE Approved.

• 304-stainless steel wash tank for long life; powder painted, mild steel lower cabinet to protect the solvent pail from accidental spillage.

• Stainless steel 9-spray-jet manifold in the wash tank; mounting adapters to distribute solvent to the painter’s gun

• Safety lid switch halts pump if lid is opened during cleaning.

SHOP AIR

C-AIRE® VERTICAL SIMPLEX AIR COMPRESSORS

• 2-Stage, single phase

• Tank drain, ball valve, oil drain tube, and full synthetic oil included

• 230 Volt

• 50,000 hour main bearings

• Large oil sight glass and liquid-filled gauge included

• 1 year warranty

CAIA050V060-1230

CAIA050V060-1230FP*

CAIA050V080-1230

CAIA050V080-1230FP*

CAIA075V080-1230

CAIA075V080-1230FP*

*FULLY PACKAGED UNIT THAT INCLUDES:

• Oversized aftercoolers - removes over 60% of water vapor, humidity, or moisture

• Pneumatic automatic tank drain

• Installation kit which includes 4 mounting pads, 4 anchor bolts, 12”steel braided flex hose

C-AIRE HORIZONTAL SIMPLEX AIR COMPRESSORS

• 2-Stage, 3-phase

• 230 Volt

• 50,000 hour main bearings

• Tank drain, ball valve, oil drain tube, and full synthetic oil included

• Large oil sight glass and liquid filled gauge included

• 1 year warranty

C-AIRE BOGE ROTARY SCREW COMPRESSOR

• 3 Phase 230V or 460V

• 69 dB noise level

• Integrated air filtration

UPGRADE OPTIONS:

• Refrigerated dryer (pictured)

• Focus controller 2.0

• 120 or 240-gallon tank •

• Ball valve tank drain included

• Three-valve bypass

• Base Controller

MILTON® MINI REGULATOR

• 1/4” NPT

• 1/8” NPT gauge port

• 250 psi

SHARPE® MINI AIR REGULATOR w/ GAUGE

• 1/4” Female NPSM (Inlet) x 1/4” Female NPSM (Outlet) Connection

• 22 CFM Air Consumption

• 0 to 160 psi pressure gauge

SATA AIR MICROMETER

• 0 to 145 PSI pressure gauge

• Display range 0-10 bar

• Green area HVLP up to 2.0 bar

• Blue area RP up to 2.2 bar

• 1/4” male thread and G 1/4” female thread

w/

GAUGE

SHARPE AIR ADJUSTING VALVE

• Precision tapered valve

• Full open to close with approximately 4 turns

• Air inlet 1/4” npsm

• Air outlet 1/4” npsm (swivel nut)

SHARPE HIGH VOLUME AIR ADJUSTING VALVE w/ GAUGE

• Static & dynamic air pressure at the gun

• Air inlet 1/4” npsm

• Air outlet (swivel nut) 1/4” npsm

SHARPE AIR ADJUSTING VALVE

w/ GAUGE

• Use on HLVP spray guns

• Air inlet 1/4” npsm

• Air outlet (swivel nut) 1/4” npsm

IWATA AK-1B2 AIRFLOW

CONTROL VALVE

• 0-140 PSI pressure gauge

• Air inlet 1/4” NPT Female

• Air outlet 1/4” Male

• Gauge Size: 1 1/2” Dia.

SATA ADAM 2 U DOCK

• Air micrometer G 1/4″ with SATA adam 2 display for SATA dry jet and competitor spray guns

• Display can be attached and removed in no time at all

• Dock Only

SHOP AIR

SHARPE 880A AIR CONTROL UNIT

• 5 micron filtration

• Air Inlet Size: 1/2” NPT (f)

• Air Outlet Size: 3/8” NPT (f) and 1/4” NPT (f) plugged

• Max. Operating Pressure: 200 psi (13.6 bar)

• Filter Capacity: 75 cfm

• Regulator Capacity: 50 cfm

MILTON M-STYLE COUPLER KIT

Five piece M-style coupler kits include various couplers and plugs with a 1/4” basic flow size. M-style Kwik Change couplers are made of brass, while the M-style Kwik Change plugs are made of case-hardened steel and are plated to resist rust.

Part#

MILS-211 5 Piece - 1/4” NPT, Milton Style

Kit Includes

MILS-715 - 1/4” ARO style female coupler

MILS-727 - 1/4” ARO style male plugs (Qty 3)

MILS-728 - 1/4” ARO style female plugs

SATA PLUGS

SHARPE 18B-500 AND 18C-500 AIR REGULATOR ASSEMBLY

• Air Inlet 3/8” npsm (female)

• Air Outlets (2) 1/4” npsm (female)

• Air Flow Capacity: 50 cfm

MILTON A-STYLE 1/4” COUPLER/PLUG KIT

Couplers and plugs made of case-hardened steel and are plated to resist rust. For air shop use and are push-type. Simply push plug into coupler to engage, and pull back the sleeve to remove.

MILS-213 5 Piece - 1/4” NPT, ARO Style

Kit Includes

MILS-775 - 1/4” ARO style female coupler

MILS-777 - 1/4” ARO style male plugs

MILS-778 - 1/4” ARO style female plugs

PREVOST® PREVO S1 COUPLERS

• “One push” safety system (avoids hose whip)

• Composite body

• Anti-static non scratch

• 29 to 174 psi operating pressure

PRVISI-061201

PRVUSI-061201

MILTON V-STYLE HI-FLOW INTERCHANGE SERIES

V-style specifically designed for HVLP (High Volume Low Pressure) applications.

• V-style couplers are push-type

• Maximum inlet pressure: 300 PSI

• Maximum temperature: 250° F

• Air flow: 74 SCFM

• Seals: Buna-N

V-STYLE HI-FLOW BRASS COUPLERS

PRVESI-071201

V-STYLE HI-FLOW PLUGS

TYPHOON HIGH FLOW BLOW GUN

1/4” NPT, CLAMSHELL

• Delivers up to 34 CFM at 125PSI

SHOP AIR

• Max flow for easy clean-up and blow off

• Lightweight and ergonomic

• Variable flow trigger for controlled blow off

• OSHA 1910.242B & 1910.95 compliant

MILTON SAFETY LEVER BLO-GUN

• Full flow control with OSHA compliant safety nozzle

• Safety lever

• Drops below 30 PSI if nozzle is dead ended

MILTON ADJUSTABLE M STYLE POCKET BLOW GUN

• Easy grip, two finger control to adjust from full volume air flow to complete shut off

• Knurled grip for secure handling even with oily or greasy fingers

• Fits M style couplers, or any 1/4” industrial style couplers

• Maximum pressure of 150 PSI or 15.9 SCFM at 100 PSI

Fits M style or any 1/4” industrial style couplers

TITAN 4-IN-1 INTERCHANGEABLE BLOW GUN KIT

• Quick release blow gun knob

• Interchangeable design features 4 attachments and works at 6 different angles

• For use in confined areas or applications where challenging angles are present

• Ideal for cleaning debris from work space, drying wet surfaces, and many more applications

• Venturi tip boosts air flow

Part#

MILS-150 Connection 1/4” NPT inlet

READING TECHNOLOGIES INC®

SPRAY HOSES

• 400 PSI working pressure

• Patented built-in swivels on both ends

• Includes high flow coupler/plug

• Manufactured in compliance and exceeds UL specs

• 3/8” ID

SATA PREMOFLEX AIR VISION 5000 BREATHING HOSE

Quality non-gassing hose recommended for use with supplied air respirators. Non-gassing or out-gassing refers to compressed air as it flows over the internal wall of the hose. A non-gassing hose will not introduce harmful vapors or gases into the air stream. Quick couplers included.

GATES® HYBRID AIR HOSES

Hybrid polymer air hose combines flexibility and strength together, making it the best hose for air service applications. Fittings are 1/4”-20, same as what most shops have on hand.

SATA 1.2M (4 FT) WHIP HOSE

Interconnects between belt regulator unit and spray gun. Completely mounted with quick coupling and nipple. Inner diameter 9 mm (0.354”) for sufficient air supply of the spray gun. Silicone free and flexible.

3M IAS 3-LIGHT AS HOSES

• Diffused external exhaust air guide ensures flexible working

• 2-in-1 hose and IAS interface are easy to use and save time when changing tools

• Rotating adapter ensures smooth, rapid working progress and saves time

SHOP AIR

C-AIRE TSUNAMI ULTRA-FLO SPRAY HOSES

Defend your work in the booth and take your air system into the future with Tsunami Ultra-Flo Technology. Designed to lay flat and not prone to the coil, the Ultra-Flo Spray Hose reduces static build-up with a built-in anti-static strip. High quality and durable, the Ultra-Flo Spray Hose is built with a proprietary internal lining that prevents breakdown and contamination, meaning you won’t have to replace it as often.

C-AIRE TSUNAMI WATER SEPARATOR

To be installed at point of use to remove liquid condensate and particulates (larger than 10 micron) from compressed air.

• Air flows down inner tube and reverses direction when it hits the baffle plate. Air velocity is slowed which allows gravity to remove the bulk liquids

• Air then travels upwards through the stainless steel mesh which removes particulates and coalesces water molecules into larger droplets which fall to the bottom

• Float drain allows liquid to drain out the bottom (Float drain can be easily accessed by unscrewing the bottom cap)

C-AIRE TSUNAMI COALESCING FILTER

Removes oil, small aerosols and fine particulates (down to .01 microns).

C-AIRE TSUNAMI ACTIVATED CARBON FILTER

Removes oil vapors, odors and taste (down to .003ppm). Cleans air to Grade D breathing air standard

MILTON 1/2” DELUXE META: FR DUO AIR FILTER REGULATOR

• Features a 1/2” national pipe thread, ensuring compatibility with a wide range of pneumatic systems

• Regulates air pressure effectively with a maximum of 250 pounds per square inch, maintaining consistent airflow for efficient operation

• Offers a maximum of 100 standard cubic feet per minute, ensuring ample airflow for demanding applications

• Operates smoothly within an operating temperature range of 40 degrees Fahrenheit to 150 degrees Fahrenheit, suitable for various working environments

READING TECHNOLOGIES INC ELIMINATOR® II DESICCANT DRYER

• Provides continuous dry, oil-free air to -40ºF dew point

• 2 in 1: Activated carbon pre-filter for superior oil vapor removal and built-in final filter with contained desiccant cartridge, no desiccant dust migration

• Toolless spin on/spin off elements for easy maintenance

• Inverse-Flow® Technology, upwards compressed air drying

• Automatic float drain in first stage

• Maximum pressure: 150 PSI

• Flow capacity: 30 SCFM @ 100 PSI

Filter

1st stage RTI4P-060

2nd stage RTIDE401

READING TECHNOLOGIES INC PERF-25 PAINT AIR SYSTEM

• Single spray gun paint air system

• Consistent -40ºF dew point and 0% CAH

• No desiccant maintenance

• Final filter eliminates downstream desiccant dust

• Patented pre-filtration eliminates water, dirt & oil

• Downstream true moisture indicator to verify CAH

• Industry recommended high flow 3/8” regulator

Replacement Filter Cartridges

1st stage RTI3P-060

2nd & 3rd stage RTI3P-060

SHOP AIR

SATA SERIES 500 FILTERS

Enables a higher absorption of contaminations and enhanced durability due to the optimized position of the charcoal filter. The SATA filter 500 is available with different filter stages. Changing the filter is simple and straightforward and filter maintenance is only necessary every 6 months.

• Higher absorption of contaminations (compared to SATA filter 484) due to the new sintered activated charcoal filter

• Synchronized maintenance: Filter maintenance only necessary every six months for all stages

• Maintenance-free bayonet lock with haptic and acoustic feedback

• Fine filter and activated charcoal filter cartridges fit perfectly by simply being inserted – no screw fittings or additional seals

• Simple plug-in system for upgrading SATA filter 544 to 584

• Maintenance-free sealing elements

• Line connection possible either from the left or the right side

• Air flow at 6 bar: 3,800 Nl/min

SAT1100990

Filter 544TM - Double-stage filter (without activated charcoal), suitable for the application of solvent-based paints

SAT1099953

Filter 584TM - Triple-stage filter (with activated charcoal), suitable to apply

VOC-Compliant paints, such as waterborne or high solid paints

Sintered Brass (1st stage) SAT22160 Fine Filter (2nd stage) SAT1097999

SATA SERIES 200 FILTERS

Along with the 500, the 200 filter series is the most versatile modular filter system currently on the market but at an unbeatable price.

• Air flow cfm at 90 psi

• Fine filter filtration at 0.01 micron

• Maximum protection

SAT44404

SAT141218

Filter 244TM - Double-stage combi filter

Filter 284TM - Triple-stage combi filter

Replacement Filter Cartridges

Sintered Brass (1st stage) SAT22160 Fine Filter (2nd stage) SAT81810

Replacement Filter Cartridges ***Contact your local Arnold Motor

Activated Charcoal (3rd Stage) SAT1098004

Activated Charcoal (3rd Stage) SAT85373

FILTER

FILTER

MOTOR GUARD® DISPOSABLE DESICCANT FILTER - 2 PACK

This unique product is the only in-line disposable filter that features a color change indicator, signaling time to change the filter. Attaching directly to the spray gun, removes all traces of water vapor, aerosols and dirt, providing crucial protection for final blow off of body panels and for all stages of painting including the critical application of clearcoats.

MOTOR GUARD DISPOSABLE SPRAY GUN FILTER - 2 PACK

The filter that ends painting failures by absorbing oil aerosols, condensed moisture, and contaminants as small as .01 microns. It attaches directly to the air inlet of the spray gun, and as air is passed between the patented spiral wound element’s compressed layers, particles as small as .01 micron are entrapped.

WIX AQUACHECK

WATER REMOVAL KIT

MILTON COMPRESSED AIR SYSTEM FILTERS

• Automatic overnight drain

• 3 stage baffle system

• Polycarbonate bowl

TOOLS

NORTON® VAC RACK BUNDLE

A customizable mobile work station, brings dust extraction to the next level. This bundle includes the essentials needed for most sanding applications, allowing easy access to abrasives, tools, and accessories needed to complete a job. Results in a cleaner and healthier working environment, better finish, and reduced abrasive costs.

ORGANIZATION AND PROFICIENCY

• Versatile design and enclosed storage area allows for customization

• “Stay put technology” hooks are durable and perfect for holding abrasive discs for convenient and easy access

STURDY AND MOBILE

• Compact, smooth-edged design to maneuver tight spaces effortlessly

• Caster locking wheels and vacuum strap provide extra stability

Engineered for extremely smooth and quiet operation with a lightweight and ergonomically design for maximum comfort.

NORTON MULTI-HOLE BACK-UP PAD - VAC RACK

Durable pad that enhances sanding performance by keeping the surface clear of debris, reducing clogging, and extending abrasive life. It ensures better airflow and improved sanding efficiency, making it ideal for clean, dust-free work in industrial and workshop environments.

NORTON VAC RACK HOSES

High-quality hose designed for seamless integration with the Vac Rack system, providing superior airflow and efficient dust collection.

NORTON FILTER BAG FOR USE WITH VAC RACK

Designed for efficient dust collection in sanding and finishing tasks. It traps fine particles to keep the workspace clean, improving air quality and extending the life of abrasives.

HI-TECH® HI-BUFF

RANDOM ORBITAL POLISHERS

Featuring a compact and ergonomic design, it offers comfortable handling and easy maneuverability, making it ideal for both small-scale and large-scale projects.

HTCHB-15MMT

HTCHB-21MMT 15 mm throw - 5” backing pad 21 mm throw - 6” backing pad

3M PERFECT-ITTM

RANDOM ORBITAL POLISHERS

Experience no more swirls, holograms, or burn-through with the 3M™ Random Orbital Polisher and finishing system; and achieve a consistent high-gloss finish on a variety paints and clear coats.

MEGUIAR’S® PROFESSIONAL DA POLISHER

• Designed for use with our DBP5 backing plates for 5” pads/discs to tackle every job

• Digital Torque Management (DTM) - Digital circuit electronically adjusts torque needed to maintain loaded speed level

• Thumb adjustable speed dial - Wide 3000 - 7500 OPM (Orbits Per Minute) speed range allows for faster compound and superior final polishing

• Multi-Position D-handle improves comfort and control for optimal user preference

• Billet counterweight with Multi-Bearing Design ensures smooth, precision balance with increased durability

INGERSOLL RAND MINI POLISHER AND BUFFER

This mini polisher excels in buffing and polishing paint, metal, and plastic surfaces to a high-gloss finish. Performing at a speed of 6,400 RPM, this tool delivers as well as ones twice its size.

TITAN 11 AMP 7”

• Variable speed 1000 to 3000 RPM

• Auxiliary handle mounts either side

• Includes hook & look pad for sandpaper, rubber pad for polishing bonnet

3M PISTOL GRIP BUFFER

Design allows sanding in hard to reach areas - door jambs, bumpers, and headlights lenses.

PERFORMANCE TOOL

ORBITAL POLISHERS/BUFFERS

• Random orbital action reduces risk of paint burn through and swirl free finish

• Large comfortable double handle for optimum control with less fatigue

• Polish cars, boats, granite counter tops and more

HUTCHINS® HUSTLER STRAIGHTLINE AIR SANDER

The only 2-cylinder, common piston Straightline with vertically-engaged, twin-drive gears. Lack of “rolling gears” common to all other straightlines eliminates “humping and jumping” at the end of each reciprocal stroke.

HUTCHINS HUSTLER VACUUM

ASSIST AIR SANDER

6”

Bonnet 3 Pc. 10” Polishing Bonnet

INGERSOLL

RAND® STRAIGHTLINE AIR SANDER

Great for tough sanding jobs, this straight-line air sander provides smooth finishes and runs up to 3,000 reciprocating strokes per minute.

2-Cylinder, oversized common piston, powers twin-drive vertically-engaged gears with synchronized strokes so smooth that the 2000 VA/DF gets lighter with use.

HUTCHINS ORBITAL ACTION AIR SANDER

Adapts to every surface preparation need heavy-duty to feather finishing. Powerful air-efficient motor with 5-point suspension guarantees 44 square inches of uniform, full contact sanding.

16”

3M AIR FILE SHOE

• Sized for 16” Straightline air file sanders with two bolts

3M RANDOM ORBITAL PISTOL GRIP SANDER

Powerful lightweight tool primarily intended for use in the automotive aftermarket and ideal for intermittent use on light duty spot sanding and finishing applications.

3M PISTOL GRIP DISC SANDER

• Powerful .45 HP motor delivers up to 18,000 RPM

• Weighs less than 1.5 lbs. for versatility and ease of use in tight spaces

• Balanced motor and comfortable molded pistol-style grip decrease vibration and noise.

HUTCHINS

RANDOM ORBITAL SANDER NIB/SPOT

• Designed to be used for fine, small area sanding

• Variable speed control support low RPM

HUTCHINS

RANDOM ORBITAL ACTION SANDER

• Researched and developed for ultra-fine finishing

• Flex-cover gives comfortable grip, prevents stiff fingers

• Lower profile, vibration-free motor ensures full contact sanding

• Unique air efficiency system

• Positive-action drive supported by 4-special bearings generates more power on less air

• Less aggressive sanding action

• Perfect for pre or post paint sanding applications

• Smooth low-vibration operation

HUTCHINS SUPER SANDER III RANDOM ORBIT ACTION SANDER

• Composite motor housing and shroud reduce weight and insulate the operator from vibration

• Ultra smooth motor with positive action drive and unique 4 bearing support ensures full contact sanding

• Offers the same ultra-fine finishing as the 4500 with a lightweight-low profile configuration

TOOLS

3M FILE BELT SANDER

• Lightweight file belt sander is ideal for cutting and finishing work in body repair

• Powerful .65 horsepower motor is excellent for collision repair applications

• Rotatable housing allows for use in a versatile range of tight spaces

S & G TOOL AID

PHENOLIC BACKING DISC COMBO PACK

Phenolic reinforced backing plates for sanding and grinding work. Each disc has the same molded depressed center contour and 7/8” I.D. hole.

SUNEX® MINI AIR DIE GRINDER

• Built-in speed regulator

INGERSOLL RAND HIGH SPEED AIR SANDER

• Economical high-speed sander ideal for light sanding, feather edging, and rust removal.

• Compact, lightweight, and easy to handle for your prolonged comfort

• Built-in power regulator and variable speed

S & G TOOL AID®

BACKING DISC

• Lightweight and flexible for sanding and grinding work

• 7/8” I.D. molded depressed center hole

• 20,000 RPM max speed

• Lock off throttle for extra safety

INGERSOLL RAND® MINI SURFACE PREP SANDER KIT

This mini surface prep sander kit is ideal for the removal of rust, surface deposits, and welds in hardto-reach places. With smooth power delivery and durable casing, this kit has all you need and is ready to work. This kit includes:

• 1/4” 15,000 rpm air sander

• 1 - 2” medium backing pad

• 1 - 3” medium backing pad

• 2 - 2” 80 grit discs

• 2 - 2” coarse brite discs

• 2 - 2” medium brite discs

• 2 - 3” 80 grit discs

• 2 - 3” coarse brite discs

• 2 - 3” medium brite discs

SUNEX RIGHT ANGLE MINI DIE GRINDER

• Contoured housing with a secure grip and compact design to improve accessibility.

• Variable speed throttle for more control

INGERSOLL RAND

3/8” CHUCK RIGHT ANGLE AIR DRILL

The 3/8” keyed chuck right angle air drill is a durable, reliable tool that’s great for drilling in all types of materials, including sheet metal, wood and composites.

INGERSOLL RAND CUT- OFF TOOL

This heavy-duty air cut-off tool was built for hard work. With a specialty of exhaust replacement, you can cut off mufflers and tailpipes quickly, efficiently, and quietly. Great for use in any vehicle repair market.

INGERSOLL

RAND HD AIR RECIPROCATING SAW

Designed for all types of cutting tasks, including intricate shapes and light radius curves in various materials. With an inline configuration, these saws allow for easier access in tight spaces, so even the toughest jobs can get done.

INGERSOLL RAND

MINI 1/4” IMPACT WRENCH

Despite its small size, this mini impact wrench packs a punch. Thanks to its rocking dog impact mechanism and finely tuned vane motor, this wrench is as compact as it is powerful.

INGERSOLL RAND

SUPER-DUTY AIR HAMMER

• Up to 1,725 blows per minute

• Alloyed steel barrel and heat-treated piston for longer life

• Built-in power regulator and trigger control

• Round shank opening

• 4” stroke Length

INGERSOLL RAND

AIR HAMMER KIT

• Up to 3,500 blows per minute

TOOLS

S & G TOOL AID CLAW RIPPER

• Slotted for smooth edge panel cutting and ripping

• .401” Parker shank pneumatic chisel

Part#

SGT91250

• Alloyed steel barrel and heat-treated piston for longer life

• Includes 5 piece chisel set

• 2 5/8” stroke and 0.69” bore diameter

ISNIRT116K

PERFORMANCE TOOL

AIR HAMMER w/

4 CHISELS

• Built-in air regulator for precise speed control

• Single piece assembly for longer tool life

• Quick change coil spring retainer

• Includes 4 chisels: flat, spot weld breaker, tapered punch, rivet cutter

• 4500 BPM and 1 1/16” stroke

WILM550DB

S & G TOOL AID WIDE CHISEL & SCRAPER

• Special 1 1/8” blade for scraping and cutting in body shop work

• .401” Parker shank pneumatic chisel

SGT91150

S & G TOOL AID RIVET BUSTER

• Shears bolts and rivets

• Cuts bolts in body and machine shop work

• .401” Parker shank pneumatic chisel

Part#

SGT91500

S & G TOOL AID TAPERED PUNCH

• Drives out pins and rivets

• .401” Parker shank pneumatic chisel

• 7-1/2” OAL

Part#

SGT91450

S & G TOOL AID QUICK CHANGE CHISEL RETAINER

• Securely holds .401” parker shank chisels

• Fits most popular air hammers (For IR 121, 132 & 772, use Cat. No. 94450)

• Safe to use, fast to change chisels - just pull back collar to install or remove chisels

Part#

SGT94400

S & G TOOL AID PANEL CRIMPER

• For patching sheet metal panels uniformly and quickly

• Forms a step around the area to be repaired. Patch is placed on flange of step, flush with the original panel surface

• Full grip handle

• 7” overall length

Part#

SGT91625

MOTOR GUARD®

MAGNA WIRE 5 FINGER CLAW

The unique design pulls Magna-Wire one finger at a time until damaged metal is flush with surface. Excellent method for pulling out long, difficult creases. Constructed of heat-treated, hardened steel. Part#

STECK® STUD LEVER

Designed to remove a wide range of threaded studs and bolts, including rusted, seized, or damaged fasteners. Its versatile functionality makes it suitable for different sizes and types of studs, enhancing its applicability in various situations.

Part# Description

STK20014C

STK20014

STK20013

Stud Lever w/ Tab-it

Stud Lever

Tab-It (Glue Attachment)

MOTOR GUARD MAGNA STITCHER KIT

Provides an economical solution for plastic repair by turning your stud welder into a plastic repair tool. The Magna Stitcher fits all popular stud welders and provides all the features of a plastic repair system at a fraction of the cost. The Magna Stitcher can be used to repair bumpers, fascias, spoilers, headlamp frames, interior molding, radiator brackets and any thermoplastic part.

Part# Description

Replacement Stakes - 50 Per Pack

“S” Stake MTGMS2004

“V” Stake MTGMS2006

“M” Stake MTGMS2005

“W” Stake MTGMS2007

Magna Stitcher Kit Magna Stitcher Adapter

TOOLS

MOTOR GUARD MAGNA-SPOT ENTRY STUD WELDER KIT

• Contains a 1500 series stud welder, entry slide hammer, electrode for pins, 100 – 2.0mm pins in a handy storage carton

• 120 VAC 1 PH 50/60 Hz 15 A

• 9 foot heavy gauge oil resistant power cord Part#

MOTOR GUARD MAGNA-SPOT DELUXE STUD WELDER KIT

• Contains a 1500 series stud welder, heavy-duty slide hammer, Magna Clamp, T-Puller, electrodes for pins, rivets and shrinking, Magna-Wire adapter kit, 250 –2.0mm pins, 250 – 2.5mm pins, 150 – trim rivets in a blow molded carry case

• 120 VAC 1 PH 50/60 Hz 15 A

• 9 foot heavy gauge oil resistant power cord

MOTOR GUARD STUD ELECTRODE

Use for welding draw pins. Replacement Stud Electrode fits all Motor Guard Magna-Spot Studwelders.

MOTOR GUARD TRIM RIVET ELECTRODE

Use for installing trim rivets. Replacement Trim Rivet Electrode fits all Motor Guard Magna-Spot Studwelders.

MOTOR GUARD

SHRINKING ELECTRODE

Use for shrinking raised or stressed metal. Replacement Shrinking Electrode fits all Motor Guard Magna-Spot Studwelders.

MTGJ20009

MOTOR GUARD

TRIM RIVETS - 500 PACK

Copper-coated steel rivets, weld to body panel to replace OEM clips for metal trim strips and window trim.

MOTOR GUARD MAGNA DRAW PINS

• Steel with copper coating

• Easy weld for quick pulling

• Strong and flexible

• Quantity: 500

MOTOR GUARD

MAGNA WIRE ADAPTER

For use with Motor Guard Magna-Spot Stud Welders, this kit allows you to weld Magna-Wire and other brand “wiggle wire” with your Motor Guard Stud Welder. For pulling difficult to access dents and long creases. Kit includes adapter tube and electrode.

MOTOR GUARD MAGNA WIRE

Steel, copper coated corrugated wire. Weld with an electrode adapter to pull out long creases evenly with a magna claw.

S&G TOOL AID WINDSHIELD REMOVING TOOL

• Use to remove windshields, backlights and bonded backlights

• Cuts the sealant around windows with specially designed tempered steel blade

• Pull handle provides additional leverage

SGT87900

S&G TOOL AID

WINDSHIELD REMOVING KIT

• This kit contains the basic tools and wire needed for removing even the most modern windshields

• Make a difficult job easy - even on acutely angled windshields

SGT87460

TOOLS

LISLE WINDSHIELD LOCKING STRIP TOOL

Unique design allows tip to swivel 90 degrees in either direction to work where others won’t. Just select the tip with opening that most closely fits locking strip, and then feed locking strip into eyelet. Tip swivels in 90 degrees in either direction.

LISLE WINDSHIELD

WIPER ARM REMOVER

Easily removes wiper arms without damage to car finish.

KEYSCO ACID BRUSHES

• Overall length: 6-1/4″

• Brush: 1/4” x 1/2”

• 12 Pack

SM ARNOLD SINGLE EDGE RAZOR BLADES

• Notched, single edge replacement blades with sharp edges

• Use for scraping, trimming and cutting

• Made of high carbon steel

• Fits all standard razor blade holders

• 100 blades per box

SM ARNOLD PLASTIC RAZOR BLADES

• Notched, single edge plastic blades are user friendly

• Perfect for use on plastic coated windows or hard surfaces that can be marred or scratched by metal blades

• Fits all standard razor blade holders

• 100 blades per box

LISLE WINDSHIELD/DOOR HANDLE CLIP PLIERS

Releases clips to remove chrome molding on most windshields and rear glass. Offset handle permits easy access to molding clips. Slips under door handle without damage to panel material.

S&G TOOL AID WINDSHIELD CUT-OUT WIRE

• Braided design provides the fastest cutting action possible

• Quickly slices through urethane and silicone windshield adhesives

• Each braided helix of this wire acts like a cutting saw tooth

• 72 feet per hank

S&G TOOL AID WINDSHIELD CUT-OUT WIRE HANDLES

• Securely and safely holds windshield cut-out wire up to .035” diameter

• This set of 2 handles holds braided or solid wire

• Specially designed to keep wire away from your hands and fingers

LISLE WINDOW BELT MOLDING REMOVER

The tool quickly removes the belt molding without damage to the window or the molding. Fits most domestic and import vehicles.

LISLE WINDSHIELD HOLDER

Works on all cars and trucks with a top door frame. Simply loop cable over door frame and attach suction cups to each side of glass.

S&G TOOL AID URETHANE CUT-OUT KNIVES

• Cuts the urethane bond holding the windshield

• Lightweight, rigid aluminum shank with vinyl grip

• Uses standard utility knife blade which is easily replaced

• Blade held firmly in place by a steel plate and pin

STECK DOOR SPRING REMOVER

• Safest tool available for coil springs in GM Doors

• Compresses spring for easy, safe removal

PERFORMANCE TOOL DOOR/ WINDOW CLIP TOOL

Removes and installs door handle and window crank retainer clips on many popular vehicles.

STECK BUSHING TOOL

Compatible with a wide range of bushing sizes and types. Its versatile design allows it to handle various applications, accommodating different bushing dimensions found in vehicles and machinery.

LISLE DOOR ADJUSTER

Will adjust doors with either bolted or welded hinges. Simply slide pin end of tool into door latch and close door until tool engages door striker.

LISLE WINDOW AND DOOR CLIP REMOVE/INSTALLER

Works on GM, Ford and others using the common “C” type clip. Really fast and easy. Helps prevent damage to door panel upholstery. Opposite end firmly holds clip for easy installation.

S&G TOOL AID DOOR ALIGNER HINGE SPRINGER

• Repair sprung doors on domestic and foreign made vehicles with box type door hinges in deep or shallow wells

• Knurled surface prevents slippage

• Use on front and rear door hinges and trunk lids

S&G TOOL AID JIGGLER REVEAL MOLDING REMOVER

• Remove clips holding windshield and rear window reveal molding found on Ford vehicles

• Double sided tool can be applied easily and allows for quick disengagement of molding clips

• Rubber insert on tool protects glass from being scratched

STECK AID E-Z STORE DOOR ALIGNMENT TOOL

Simplify door alignment and fitment tasks with this compact tool.

DOOR PANEL REMOVER

The bent handle design allows use where space is limited, and provides extra prying force. The unique, square cutout in the tool tip provides a no-slip grip, even on fasteners with small ears.

STECK RETAINER CLIP RELEASE

Specifically designed for effortless removal of retainer clips, fasteners, and panel clips without causing damage to the surrounding parts or panels.

STECK SURE GRIP TRIM CLIP PLIERS

A unique design that ensures a secure and firm grip on trim clips and fasteners.

LISLE PLASTIC FASTENER REMOVER

This tool quickly removes various types of plastic fasteners that hold on weather stripping, radiator shrouds, fender linings, air dams and other plastic or rubber parts. Equipped with a sliding urethane button for use when extra leverage is necessary.

TOOLS

STECK UNIVERSAL MOLDING RELEASE TOOL

Designed to work with various types of moldings and trim, making it a versatile tool suitable for a wide range of automotive makes and models.

STECK E-Z STRIP II MOLDING TOOL

A wedge and pry bar combination that allows for gentle and non-damaging removal of moldings and trim. It prevents scratches, dents, or paint damage to the vehicle’s surface during the removal process.

STECK HANDY BAR

Essential tool designed to help hammer out dents, work inside quarter panels, rear body panels, body lines, and much more.

STECK EASY PRY TOOL

Allows for prying at different angles, making it easier to access hard-to-reach areas and corners during automotive tasks.

STECK SEAMBUSTERS

Heavy duty chisel designed to separate spot-welded or bonded panels. Ideal for quarter panels, rockers and pinchwelds.

STECK SPR EXTRACTION TOOL

High-grade, hardened steel frame, that uses a 1/2” 20 grade 8 hex bolt, with hardened tip, to easily push out a SPR with a 3/4” or 19mm socket using your 1/2” impact wrench. Part#

STECK SPR INSERTION TOOL

High-grade, hardened steel frame, that uses a 1/2” 20 grade 8 hex bolt, with magnetic end and center recess to hold replacement self-piercing rivets (SPR), while inserting it with a 3/4” or 19mm socket using your 1/2” impact wrench.

PERFORMANCE TOOL HYDRAULIC RIVETER

• Air hydraulic riveter is ideal for setting blind rivets in aluminum, steel and stainless with professional results the first time

• Air relief valve prevents overloading

• Includes four nose pieces: 3/32”, 1/8”, 5/32” and 3/16”, spanner, spanner gauge, safety cap, and replacement O-rings

• Maximum capacity: 3/16”, Pounds of pull: 1,584, Average CFM: 4 at 90 PSI, Length: 10.65”, Weight: 3.3 lbs

PERFORMANCE TOOL LI-ION CORDLESS HEAT GUN

• The most compact rechargeable cordless heat gun on the market is only 4.8 ounces and lightweight enough to carry in your tool belt or repair kit

• Heats up to a maximum temperature of 600 degrees Fahrenheit (315C) within 10 seconds with a very focused, no flame output to protect surrounding components and wiring

PERFORMANCE TOOL HEAT GUN

• Dual speed fan delivers 300/500 CFM at temperatures between 572-932 degrees Fahrenheit (300-500 C)

• Heating coils wrapped around ceramic insulators for extended run times and more consistent heat output

STK21970

Part#

STK21960

Part#

WILM680

Part#

WILW2082

Part#

WILW50076

EVERCOAT® METAL-2-METAL REINFORCED BODY FILLER

Aluminum filled body repair filler for metal surfaces. Has excellent corrosion resistance and superior adhesion to galvanized steel and aluminum. Will not sag. Best known as the “nearest thing to lead.” Moisture proof. Rustproof. Easily sands to a fine featheredge. Metal-2Metal™ liquid reactor included.

BODY FILLERS

U-POL® FIBRAL LITE FIBERGLASS FILLER

USC® ALL-METAL® BODY FILLER

Easy-to-spread and use, repairs metal with metal and has the workability of premium body fillers. Can be drilled or tapped and also Waterproof.

USC DURAGLAS® BODY FILLER

Formulated with fibers to provide ultimate strength and durability on rust-outs, holes, tears and cracks. Rust and waterproof. For large repairs, use with a fiberglass cloth.

• Spreads like a short strand yet bridges holes like a long strand

• Non-sagging even on vertical surfaces – spreads, adheres, and finishes like a polyester filler

• Forms a hard, durable surface that is still smooth and very easy to sand

• Water resistant

• Can be finished with putty or glaze or directly primed

3MTM MILLED FIBERGLASS BODY FILLER

• Short-strand milled fiberglass adds strength and stability

• Excellent for reinforced repairs to holes, cracks and tears under traditional body filler

• High-resin gel makes for exceptional sag resistance and gap spanning

EVERCOAT FIBER TECH®

REINFORCED REPAIR COMPOUND FILLER

An innovative all purpose repair compound formulated with Kevlar® and other high tech fibers. Its superior strength and adhesion is ideal for repairing SMC, rigid plastic body panels, i.e., ground effects, spoilers, running boards, fenders, hoods, etc. Blue cream hardener included.

EVERCOAT VETTE PANEL

ADHESIVE FILLER

A polyester body filler for fiberglass and SMC panels. No shrinkage. Helps prevent repair mapping on seam lines over fiberglass repairs. Used to bond fiberglass panels and SMC for light duty and non-structural applications. Blue cream hardener included.

EVERCOAT EVERGLASS

Short strand, fiberglass reinforced body filler. High strength, high build and waterproof which makes it excellent for repairing holes, rusted metal, body seams and shattered fiberglass. Blue cream hardener included.

EVERCOAT FIBER TECH KEVLAR COMPOUND FILLER

EVERCOAT TIGER HAIR®

Long fiber, fiberglass reinforced filler. Extra high strength and waterproof. Can be used with or without fiberglass cloth or mat. Blue cream hardener included.

EVERCOAT KITTY HAIR®

Known for bridging capabilities in rebuilding fiberglass and for reinforcing torn or rusted areas of sheet metal.

An innovative all purpose repair compound formulated with Kevlar® and other high tech fibers. Its superior strength and adhesion is ideal for repairing SMC, rigid plastic body panels, i.e., ground effects, spoilers, running boards, fenders, hoods, etc. Blue cream hardener included.

EVERCOAT FIBERGLASS AUTO RESIN

Heavy, thixotropic formula that will not run or sag and will cure to a non-tacky surface. Wets out mat and cloth quickly. Can be filed, sanded or drilled. Impact resistant. Waterproof. Use with fiberglass mat, cloth or tape to rebuild and repair. Liquid hardener included.

BODY FILLERS

EVERCOAT FIBERGLASS SMC RESIN

Polyester-based resin used for repair of SMC and fiberglass panels and parts. Formulated to use with fiberglass mat, cloth and tape. Waterproof and impact resistant. Working time of 20-30 minutes. Cures to a sandable surface much faster than regular fiberglass resin. White cream hardener included.

EVERCOAT FIBERGLASS

EVERFIX EPOXY RESIN

Epoxy resin with superior strength and adhesion. Adheres well to fiberglass, metal, plastics, wood and masonry. Provides a smooth, glossy finish coat.

EVERCOAT MARINE GEL-KOTE

Fills gouges, chips, scrapes and deep scratches in the fiberglass gel coat. One Step Finish Gel-Kote is a non-run, non-sag formulation of flexible polyester resins to produce resiliency and toughness. Evercoat Coloring Agents may be used to tint the material to desired color. Reduce with Evercoat Acetone (10%) for sprayer applications.

EVERCOAT MARINE PREMIUM GEL-KOTE

Product cures to a tacky finish for re-coating. Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat. Gel Kote™ is a non-run, non-sag formulation of flexible polyester resins to produce resiliency and toughness. Evercoat Coloring Agents may be used to tint the material to desired color.

Part#

FIB5677

FIB5676 1 gallon, white 1 quart, clear Description

EVERCOAT FIBERGLASS REPAIR KIT

Best for repair of fiberglass and metal surfaces. Will rebuild rotted-out areas on fenders, body sections and rocker panels. Also used for forming special customized shapes.

EVERCOAT COLORING AGENTS

Popular color matching agents that blend with polyester resins, epoxy resins, gel paste, polyester fillers / putties and Skid-No-More. Each color comes in a 1 oz. tube.

FIB864

FIB643

EVERCOAT FIBERGLASS CLOTH

High strength, flat weave cloth designed for covering large surfaces. Has excellent drapability and wet-out.

EVERCOAT FIBERGLASS MAT

100% fiberglass in a nonwoven state. Best used for high build-up repairs of holes and damages areas. Will conform to any shape. 1.5 ounce weight.

EVERCOAT COLORING AGENTS

Hardening agent for use with all polyester resins and gel coats. Plastic squeeze tube has graduated measure for mixing convenience.

EVERCOAT PVA MOLD RELEASE

Used to release molds when sprayed with gel coats. Also removes tackiness on a non-waxed gel coat.

S&G TOOL AID ALL-PURPOSE

ECONOMY PAINT BRUSHES

Excellent for application of compound, glues, fiberglass, undercoating, grease, oil, paint and paint removers.

3M PLATINUM

SELECT FILLER

• 3M’s highest-performing lightweight body filler

• Refined surface creates less need for primer, reducing primer usage up to 30%

• Stain-free and tack-free, ideal under all basecoat/clearcoat systems

3M PLATINUM PLUS BODY FILLER

• Contains an adhesion promoter for excellent grip on many surfaces

• The advanced formula is recommended for use with galvanized steel and aluminum

• Fast curing to allow sanding in a little as 15 to 20 minutes

BODY FILLERS

EVERCOAT Z-GRIP® FILLER

An advanced, clog-free, lightweight body filler for today’s high tech metals.

EVERCOAT RAGE® LIGHTWEIGHT FILLER

AUTOBODY MASTER® LIGHTWEIGHT BODY FILLER

An economical Lightweight Body Filler offering smooth and creamy texture that spreads easily for excellent feather edging. Adheres to galvanized, aluminum and bare steel. Sands easily and won’t load up sandpaper. Great for a general use body filler.

AUTOBODY MASTER PREMIUM BODY FILLER

Truly a premium body filler that’s tack free, self etching, and stain resistant. Formulated with finest resins available to offer superior spreading and sanding properties.

A premium lightweight body filler formulated with the finest resin available. Tack free and stain resistant, which extends the life of sandpaper and reduces the chance of staining.

EVERCOAT RAGE OPTEXTM PREMIUM FILLER

Color-changing technology is an ultra-premium body filler that helps body shops save time and money on every repair. There’s no second guessing—once mixed with cream hardener, OPTEX changes color to indicate the repair is ready to sand.

EVERCOAT RAGE GOLD FILLER

Evercoat’s easiest sanding body filler. Plus, it’s stain resistant for use with basecoat/ clearcoat paints.

EVERCOAT RAGE EXTREMETM FILLER

World’s first truly pinholefree premium body filler. This technically-advanced, unique formula is self-leveling for easy spreading, reducing sanding time to remove heavy texture. Easily sands with 80 grit sandpaper, eliminating the need for coarse grits that can cause sand scratch swelling.

EVERCOAT RAGE ULTRA

Its unparalleled sanding qualities are a result of the patent pending formula that contains renewable technology. Its non-sag formula has excellent filling properties, while eliminating the need for finishing putty.

EVERCOAT RAGE ULTRA XTRA

Specially formulated to allow for extended work times—up to 40 minutes. Manufacturers and Body shop technicians can mix and spread large quantities knowing they have enough time to work large surface areas, saving time and increasing productivity.

U-POL FLYWEIGHT LIGHTWEIGHT POLYESTER FILLER

Offers great filling properties, a smooth creamy consistency and easy sanding, all at an economical price.

• Tack free

• Pinhole resistant

• Easy to sand

U-POL LIGHTWEIGHT GOLD FILLER

Features a smooth, creamy formula, making this premium lightweight filler easy to work, spread and sand. The versatility of a non-sagging formula combined with superior filling properties and excellent DTM adhesion makes Liteweight Gold the top choice of bodyshop professionals.

BODY FILLERS

U-POL ONE FILL ALL-IN-ONE PREMIUM BODY FILLER

Intelligent micro-sphere technology formula builds like body filler yet is super smooth and pinhole free like glaze so you can skip the glaze and get on to priming and painting in 20 minutes.

USC® KROMATE LIGHT BODY FILLER

Intelligent micro-sphere technology formula builds like body filler yet is super smooth and pinhole free like glaze so you can skip the glaze and get on to priming and painting in 20 minutes.

USC HALF TIME ONE-STEP FILLER AND GLAZING PUTTY

Formulated to fill and glaze in one application, cutting your repair time and sandpaper usage in half.

U-POL FLEXIBLE HIGH DENSITY FILLER

Fixes road rash, hole throughs, and other flexible repairs. Versatile enough to use on a variety of substrates, and specially designed for flexible plastics.

EVERCOAT PLASTIK PREMIUM AUTOBODY FILLER THINNER

Specifically blended with premium stainfree, clog-free resin. Use for thinning all types of body filler including premium fillers.

AUTOBODY MASTER 2K GLAZING PUTTY

A two part glazing and finishing putty offering super smooth texture, fast dry, and no shrinkage. Excellent adhesion properties allows you to apply directly to metal, body filler, fiberglass and cured topcoats to fill minor imperfections.

USC ICING POLYESTER

FINISHING PUTTY

Best selling polyester finishing putty that spreads smoothly, self levels, and dries to an exceptionally easy to sand finish. Icing provides great adhesion and is tack free and stain free.

USC BLAZE GLAZE FINISHING PUTTY

Fast curing finishing putty for minor body work and surface imperfections such as sand scratches, chips, pinholes and scratches. Ideal for use over body filler.

USC PRONTO KOMBI SPOT PUTTY

Use on metal, aluminum, galvanized and zinc coated steel, 1K and 2 primers, and aged and sanded OEM topcoats. Use for last minute repairs and to correct minor imperfections (pinholes, chips and scratches).

U-POL LIQUID GOLD PUTTY

Perfect for rock chips and door dings or as a skim coat. Smooth spreading, easy sanding and quick drying and ready to sand, prime and paint in 1520 minutes

U-POL DOLPHIN PUTTY

Dual application premium finishing putty for filling dents and imperfections on both plastic and metal substrates, like bare metal, aluminum and galvanized steel.

EVERCOAT SPOT-LITETM

Stain resistant for use under basecoat/clearcoat repairs. May be applied to galvanized metal, aluminum, bare steel, body filler, two-part primers and sanded OEM finishes.

EVERCOAT EASY SANDTM

Two-part flowable polyester finishing and blending putty. Ideally suited for filling and skim coating body work, pinholes, grind marks, low spots and other surface imperfections.

EVERCOAT EVER-GLAZE SPOT PUTTY

Fast drying, red lacquer putty. Spreads smoothly and sands easily with minimal shrinkage.

BODY FILLERS

EVERCOAT POLY-FLEXTM FINISHING PUTTY

A flexible polyester glazing putty designed for spot filling and skim coating over repair areas on flexible bumpers and plastic parts. Its flowable viscosity is ideal for filling minor imperfections such as sand scratches, nicks, dings and gouges.

3M ACRYL SPOT PUTTY

• Putty fills minor surface imperfections

• Easy working properties include good spreadability

• Leaves smooth edges with quality feathering

• Low shrinkage offers better final results

• Fast drying formula with 1.5 minute work time

EVERCOAT 440 EXPRESSTM MICRO-PINHOLE ELIMINATOR

1K patent-pending technology. A high-solids polyester that is easy to apply and quick to dry. Testing has shown, when used properly, will eliminate up to 90% of all rework caused by micro-pinholes.

EVERCOAT POLYESTER GLAZING PUTTY

Can be applied directly to bare metal, body filler, fiberglass and fully cured sanded top coats. Easily fills grind marks, pinholes, low spots and other minor imperfections. No shrinkage. Easy dry. Reduces risk of staining. Blue cream hardener included.

EVERCOAT METAL GLAZE®

Two-part polyester finishing and blending putty. Extra-thin formula spreads smoothly. Easily fills grind marks, pinholes, uneven surfaces and other MetalWorks® body fillers and glazing putties to enhance their ease of working.

EVERCOAT Z-GRIP® GLAZE

Two-part, flowable, polyester finishing putty ideally suited for filling and skim coating body work, pinholes, grind marks, low spots and other surface imperfections. Can also be used to fill minor body damage up to 1/8” (3 mm) in depth.

FIB411

3M PLATINUMTM PLUS GLAZE

• Allows sanding in as little as 15 minutes to help speed up project progress

• Bonds well to galvanized steel, E-coat, metal, aluminum, fiberglass, SMC, OEM topcoats, cured epoxy, and urethane primers

• Stain and tack-free properties help ensure high-quality results

U-POL GOLD GLAZE

A pinhole resistant finishing glaze designed as a final skimcoat and finishing over repairs. Combines excellent leveling properties with easy sanding. Dries quickly in 15 to 20 minutes.

U-POL DOLPHIN GLAZE

A premium, technically advanced finishing glaze designed to eliminate pinholes and surface imperfections prior to painting. Its self-leveling formulation gives a smooth ultra fine finish which requires minimal sanding.

USC BODY FILLER CREAM HARDENERS

Precise factory formula for the best cure possible. For best results use with USC plastic fillers.

USC ALL-METAL® CREAM HARDENERS

Specially formulated liquid hardener for use with AllMetal® aluminum-filled repair compound that forms a strong durable, bond.

EVERCOAT CREAM HARDENER

Quick hardening, non-separating, cream hardeners formulated for use with body fillers, specialty fillers and polyester finishing putties.

PERFORMANCE TOOL FILE HOLDER

• Quality file holder and 10” flat file blade for sharping body filler to rough contour

• Use for forming body fillers, vinyl, plaster, fiberglass, wood, and more

• Features an adjustable 3-position handle and an ultra-sharp flat file blade

BODY FILLERS

PERFORMANCE TOOL HALF ROUND FILE BLADE

• 3 Position adjustable handle

• Blades may be used without holder for contoured surfaces

Use with file holder to remove and smooth metal and plastic body filler on flat and contoured surfaces.

U-POL ONION BOARD

• Reduces pinholing: specially formulated paper does not soak up resins and solvents

• Reduces clean up time and solvent cleaner use, simply tear off and discard used sheet

3M DISPOSABLE PAPER MIXING BOARDS

• Clean, non-porous surface won’t contaminate body filler

• Non-soak paper means no transfer to floors or benches

• Sized for multiple mixes on one sheet

CLEAN SHEETS

• Used to mix body filler, fiberglass, plastics, gel, putty and touch-up paint

• Prevents costly re-works

• Non-absorbing, bonded on three sides

• Free plastic spreader with each board

LISLE 1/4” PUTTY KNIFE SCRAPER

Ideal for scraping old putty, paint, dirt and carbon. Can also be used for applying putty. One piece blade has a satin finish. Handle is made of polypropylene for easy cleanup.

TITAN 3 PC SCRAPER AND PUTTY SET

Scraper features rigid stainless steel blade and a metal capped handle for strength and durability. Putty knives feature stainless steel blades for easy, accurate application of fillers and putties. Comfortable TPR handles for maximum grip.

AUTOBODY MASTER SPREADERS

Offers a special tapered edge that provides the perfect blend of flexibility and firmness for spreading body fillers and putties.

AUTOBODY MASTER MIXING BOARD

Offers a smooth, non-absorbent area where professionals can combine and adjust filler components to achieve the desired consistency and color.

3M DYNATRON® SPREADERS

• Durable plastic tool handles the rigors of the shop

• Spreader allows for precise application of body fillers, putties and glazes

• Special flexible spreading edge smooths to perfection

E-Z MIX FILLER/GLAZE SPREADERS

Have an embossed logo, 100-packs are packaged as a convenient counter display.

MASKING PAPER & TAPE

3M SCOTCH® AUTOMOTIVE REFINISH MASKING TAPE 233+

A high performance crepe paper masking tape designed specifically for the automotive repair industry. It is highly conformable and provides outstanding paint lines for critical paint masking jobs.

Part#

MMM26332

MMM26334

MMM26336

MMM26338

MMM26340

MMM26341

MMM26343

MMM26344

1/2” x 60 yds bulk - 48 rolls/case

3/4” x 60 yds bulk - 48 rolls/case

1” x 60 yds bulk - 24 rolls/case

1 1/2” x 60 yds bulk - 16 rolls/case

2” x 60 yds bulk - 12 rolls/case

3” x 60 yds bulk - 8 rolls/case

1/8” x 60 yds boxed - 12 rolls/box

1/4” x 60 yds boxed - 12 rolls/box

3M SCOTCH PRECISION

MASKING TAPE

Very special ultra-thin, ultra-smooth paper-backing tape that makes it ideal for producing sharp paint lines with both solvent and waterborne paint systems. Ultra-thin, yet strong enough to cut through layers of color and clear coat so the tape can be removed easily without tearing or adhesive transfer.

Part#

MMM06525

MMM06526

MMM06527

MMM06528

1/4” x 60 yds - 12 rolls/case

3/4” x 60 yds - 16 rolls/case

1-1/2” x 60 yds - 8 rolls/case

2” x 60 yds - 6 rolls/case

3M AUTOMOTIVE REFINISH MASKING TAPE

Yellow crepe paper masking tape designed specifically for excelling at all general masking applications in the collision repair industry. Its robust paper backing resists solvents and moisture while being flexible enough to fit most curves and contours. The proprietary rubber-based adhesive formula allows the tape to stick and stay on a variety of surfaces.

Part#

MMM06652

MMM06653

MMM06654

MMM06656

Description

3/4” x 60 yds - 48 rolls per case

1” x 60 yds - 36 rolls/case

1-1/2” x 60 yds - 24 rolls/case

2” x 60 yds - 24 rolls/case

AMERICAN TAPE® MASKING TAPE

High performance masking tape developed for transportation related paint applications such as marine, composite, bus, truck, RV, automotive and various other applications where conformability and clean removal is required.

Part#

AMTOM1855

AMTOM3655

AMTOM4855

AMTAM1855

AMTAM3655

AMTAM4855

Description

Orange Tape - 3/4” x 60 yds

Orange Tape - 1 1/2” x 60 yds

Orange Tape - 2” x 60 yds

Blue Tape - 3/4” x 60 yds

Blue Tape - 1 1/2” x 60 yds

Blue Tape - 2”mm x 60 yds

3M SCOTCH FINE LINE STRIPING TAPE

Tough, flexible polypropylene film resists both solvent and waterborne coatings and excellent for multicolor striping. Pre-slit, simply remove the 1/16” or 1/8” insert to create stripes.

3M VINYL TAPE 471+

A conformable vinyl tape with a versatile rubber adhesive and a moderately translucent backing that allows for accurate masking alignment with simple or complex patterns. This vinyl tape provides clean removal without adhesive residue, even after a 30-minute bake cycle at 250°F (121°C).

3M TRIM MASKING TAPE

Featuring a rigid band along one edge that slips gently behind moldings, lifting them slightly from the body. This tape allows paint to flow beneath the moldings while masking their exteriors for a professional, finished paint job without removing or replacing the moldings or rework for paint lines. Perforations allow for hand tearing.

3M SMOOTH TRANSITION TAPE

A fast and simple way to virtually eliminate rework caused by hard paint lines. It is designed specifically to create smooth transitions to existing finishes: a raised center ridge contains adhesive, while the paint feathers in naturally beneath the edges for virtually invisible paint lines. No more re-shooting, sanding, buffing or other time consuming rework.

MASKING PAPER & TAPE

3M WHITE MASKING PAPER

Excellent protection against bleed-through from urethanes, enamels, lacquers and base coat/clear coat paint systems. Tightly bonded construction protects against fiber contamination of paint jobs.

Part#

MMM06537

MMM06538

MMM06539

MMM06540

6” x 750’ - 6 rolls/case

3M SCOTCHBLOKTM

MASKING PAPER

Blocks solvents used in today’s gelcoats and paints from soaking through and contaminating underlying surfaces. This tightly bonded, specially coated automotive masking paper offers excellent resistance to paint solvents, urethanes, base coats and clear coats. This product was specifically made to meet the unique needs of automotive aftermarket applications.

Part#

MMM06706

MMM06732

MMM06712

MMM06736

6” x 750’ - 6

AUTOBODY MASTER WHITE URETHANE MASKING PAPER

A flouro-chemically treated 24 lb. basis weight masking paper. Its lighter basis weight is ideal for cornering and intricate masking applications. The flouro-chemical treatment gives this paper its outstanding solvent resistance and makes it ideal for critical masking applications. Part#

AUTOBODY MASTER GREEN MASKING PAPER

Machine finished masking paper is an excellent choice for inexpensive masking. It offers good paint holdout character for non-critical masking applications. Very low lint and dust.

PBEG6

PBEG12

PBEG18 PBEG24 PBEG36

AUTOBODY MASTER® GREEN POLYCOATED MASKING PAPER

Starts as a 25 lb basis craft sheet with 5 lbs of a special poly applied. The polycoat is corona treated for superior paint adhesion and is guaranteed not to bleed through.

AUTOBODY MASTER GATORBACK MASKING PAPER

• Corona treated for superior paint adhesion

• With poly-coating on the outside, there is no chance of linting

• Excellent tear resistance and corners easily

• Guaranteed no bleed through.

• Industry standard brown color

• Stronger and more affordable than U.S. Chemical Poly-Blue

• Price competitive to regular green masking comparable per foot

AUTOBODY MASTER BLUE POLYCOAT PAPER

With poly-coating on the outside, there is no chance of linting. The poly-coating provides maximum hold out for no bleed through protection.

USC HANDY MASK PAPER/TAPE

Tapes and masks in one easy step! The perfect size for masking head lights, bumpers and door jambs.

Dispenser with 7” x 65’ roll (12 per box)

USC® POLYCOATED BLUE PREMIUM MASKING PAPER

• Tough, film-bonded masking paper that is coated for durability and performance

• Stops penetration from urethane paints, solvents and water

• Polyfilm coating provides paint anchorage and water-resistance

3M HAND-MASKERTM ADVANCE MASKING FILM

Most flake-resistant film for multi-coat paint applications. Use for paint masking and overspray protection. Part#

MMM90038

MMM90039 MMM90040

NORTON OVERSPRAY

SHEETING

An economical choice for paintable sheeting. Medium density, Corona-treated plastic means the overspray paint won’t flake off and create rework. Tri-layer paintable sheeting is easy and fast to apply, and clings to the vehicle’s body even after being repositioned.

NORTON BLUE SHEETING

MASKING PAPER & TAPE

Paint will adhere to the outside of the plastic, eliminating paint flake-off. Can be cut and taped along the critical edge, replacing the need for masking paper. Covers the area that is to be protected.

3M OVERSPRAY PROTECTIVE SHEETING

Paintable, high-density, tear-resistant, translucent film designed for critical edge masking as well as protection from paint overspray. Available in three sizes to protect all size cars, vans, sports utility vehicles and trucks.

AUTOBODY MASTER PREMIUM PLASTIC SHEETING

High density plastic sheeting that offers high tear and puncture strength. Specially treated so paint clings to surface and doesn’t flake off. EZ Dispenser keeps plastic clean and simple to dispense, even without a masking machine.

PPG CLEAR MASKING PLASTIC

Easy to handle clear plastic, treated and excellent cling to prevent paint from flaking.

3M PLASTIC SHEETING

High-density, tear-resistant, durable polyethylene sheeting/film masks car from paint overspray and other contaminants during repairs. Engineered with static cling makes the film easy to handle so one person can quickly cover the vehicle.

MMM06723

MMM06724 12’ x 400’ 16’ x 400’

HIGH TECK® COLLISION WRAP

Secure components on damaged vehicles. Made from 3.0 mil film with residue free adhesive on one side for easy application and removal.

RBL PRODUCTS® COLLISION WRAP FILM

• Durable 3 mil puncture resistant plastic film with UV inhibitor

• Adheres to clean and dry surface - metal, glass & plastic

• See-through clear plastic

• Film cuts easily with razor blade, poly knife or No. 555 SNIPPET KNIFE

• Immediate protection anywhere a vehicle is temporarily stored and vehicle interior is exposed to risk of damage from wind, rain, dirt, etc., outdoors or indoors

AKZONOBEL PLASTIC MASKING FILM

Durable film designed for professional automotive refinishing. Protect areas of a vehicle that do not require painting, ensuring sharp paint lines and reducing overspray.

RBL PRODUCTS AUTO MASK MASKING SYSTEM

• Lint free! Eliminates risk of masking paper fiber contamination

• Anti-static

• Ultimate solvent bleed-thru resistance. Even paint stripper can’t penetrate it

• Resists heat up to 230°F (110°C)

• Completely waterproof – wet sand - wet sand - wet sand

• AutoMask Plastic Film is recyclable

• AutoMask uses high quality, 3⁄4” & 1 1⁄2” automotive grade masking tape

Description

RBL101

RBL102

RBL103

RBL104

RBL108

RBL109

Dispenser 21” x 115’

Refill 21” x 115’

Dispenser 43” x 115’

Refill 43” x 115’

Dispenser 72” x 115’

Refill 72” x 115’

3M OVERSPRAY

MASKING LIQUID DRY

Protects all vehicle surfaces against automotive paint and primer overspray. Covers hard-to-mask surfaces quickly and eliminates time-consuming bulk masking. Applies using conventional spray equipment with no additional costs for liquid masking.

RBL428

MASKING PAPER & TAPE

RBL PRODUCTS

WHEEL BAG MASKERS

• Built-in ‘cling’ feature enables the bag to wrap the tire for complete masking protection and keeps out of the way of air hoses and body technicians

• Paint overspray sticks to film

• Bag design allows easy cut-out of center of bag when painting hubcaps on trailers, trucks and buses

• Tough and durable, non-static, disposable, recyclable plastic

Part#

RBL177

RBL169

17” - 20” for luxury cars, SUVs, sports cars & high-performance cars - 36 bags per box

22.5” - 24.5” for buses, trucks & trailer 50 bags per box

RBL PRODUCTS

INTERIOR PROTECTION KITS

Keeps the vehicle interior clean while in the shop and awaiting customer pick-up.

5-IN-1

• Seat cover

• Steering wheel cover

• Floor mat

• Shifter cover

• Parking brake cover

RBL461

RBL PRODUCTS PLASTIC MIRROR MASKERS

• Covers large rectangular side mirror with or without 6” convex/spot mirror

• Covers up to 28” rod/mirror extensions from side of cab

• High density polyethylene (HDPE), tough & durable

Part#

per box

RBL PRODUCTS

TRACING/MASKING PAPER

For tracing and cutting out design patterns and for masking off adjacent areas. Ideal for: custom paint & graphics, automotive art, motorcycle art, street rods, truck lettering, sport helmets, sign lettering, and air brushing.

RBL371 12” x 24’

RBL PRODUCTS

TRANSPARENT MASKING FILM

A clear, transparent, self-adhering film for drawing on and cutting out templates, stencils, lettering and designs. Also works great for masking off areas next to tape lines. Just apply over tape, cut on top of tape line and remove excess.

RBL272 18” x 24’

INNOVATIVE MOBILE MASTERTM MASKING MACHINE

• Holds one roll of up to 12″ paper and two rolls of up to 18″ paper

• Narrow 19″ profile makes it easy to maneuver around the shop

• Thick steel blades allow for longevity while maintaining smooth cutting

• Easy loading of paper rolls & tape

• Convenient basket for extra tape, tools, and supplies

• Four industrial grade, total-lock caster wheels for zeroturn mobility; zero movement when locked

• Durable powder-coat finish

INNOVATIVE MOBILE MASTER DELUXETM MASKING MACHINE

• Holds one roll of up to 12″ paper and two rolls of up to 18″ paper

• Holds one roll of 36″ paper and a box of plastic sheeting

• Industry’s only 36” stainless steel tear blade for clean, smooth cuts

• Plastic dispenses from box to keep it dust free

• Narrow 19″ profile makes it easy to maneuver around the shop

• Thick steel blades allow for longevity while maintaining smooth cutting

• Convenient basket for extra tape, tools, and supplies

3M OVERSPRAY PROTECTIVE SHEETING MASKER

Spring-loaded end frame and locking tape hub make sheet roll loading easy. Wheels and light 20-lb. weight make it easily portable

3M SOFT EDGE FOAM MASKING TAPE+

Makes jamb masking quick, easy and effective. 21 mm for areas that need to be sealed during painting. Easy way to produce professional-looking paint transition lines.

.83” x 53.58 yds

3M SOFT EGDE FOAM MASKING TAPE

Provides a soft edge to prevent hard paint lines. The polyurethane foam structure tape is completely flexible so that it conforms to unique contours and is easily workable.

MASKING PAPER & TAPE

3M DOUBLE-SIDED AUTOMOTIVE HIGH-PERFORMANCE ACRYLIC ATTACHMENT TAPE

Featuring two different adhesives, one on each side of the tape for effective bonding. Formulated for high adhesive build rates on automotive substrates and designed for adherence to automotive paint systems

Part#

MMM06380

MMM06381

MMM06382

MMM06383

MMM06384

MMM06386

Description

White - 1/2” x 20 yds

White - 7/8” x 20 yds

Black - 1/2” x 20 yds

Black - 7/8” x 20 yds

Black - 1/2” x 5 yds

Black - 1/4” x 20 yds

3M DOUBLE COATED AUTOMOTIVE ACRYLIC PLUS FOAM ATTACHMENT TAPE

Two adhesives, one on each side of a strong, conformable 1.52 mm closed-cell acrylic foam core. Liner-side adhesive is formulated for bonding to automotive paint systems, and the non-liner-side bonds to metals and plastics used in automotive components. Both adhesives deliver excellent initial tack and adhesive build.

MMM06397 1/2” x 10 yds

3M NAMEPLATE REPAIR TAPE

Makes it easy to attach emblems and nameplates to vehicles with professional looking results. Thin profile (.030”) makes it possible to achieve a flush fit for less noticeable attachment.

MMM06385 1/4” x 5 yds

3M VINYL FOAM TAPE

Durable, flexible closed cell high-density foam carrier which can help seal out dust, light and moisture. These vinyl tapes offer excellent aging characteristics and will remain flexible when exposed to elevated temperatures and UV light.

MMM06375 3/4” x 36 yds

3M SCOTCH SUPER 88 VINYL ELECTRICAL TAPE

Premium grade, all weather tape designed to provide a protective jacket and primary electrical insulation for splices up to 600V. Part#

MMM06143 3/4” x 22 yds

3M AUTOMOTIVE

ACRYLIC FOAM TAPE

Excellent for flush, streamlined and permanent application of lightweight auto trim and moldings. OEM-approved tape incorporates a strong yet conformable closed-cell acrylic foam with high performance acrylic adhesive on both sides. This adhesive resists plasticizers and delivers high peel and shear adhesion.

1/4” x 20 yds 1/2” x 20 yds 7/8” x 20 yds Size

NORTON PREMIUM AUTOMOTIVE

ATTACHMENT TAPE

High density gray foam tape coated with high strength acrylic adhesive on both sides with red polyethylene release liner is designed for bonding medium to large moldings and accessories. High strength acrylic adhesive provides superior adhesion to plastics, metal, glass, and painted vehicle surfaces. Part#

AUTOBODY MASTER DOUBLE SIDED URETHANE TAPE

Premium double sided high density urethane foam tape coated with high temperature and UV resistance acrylic adhesive on both sides. This tape is excellent for bonding heavy moldings and trim with its superior holding power.

Part#

PBE7684

PBE7682D

PBE7685

PBE7683D

1/4” x 20 yds.

1/2” x 20 yds. 7/8” x 20 yds. Size

3M AUTOMOTIVE ATTACHMENT TAPE

Good choice for attaching heavier automotive trim and parts such as spoilers and running boards. It features a thick .090” (2.28 mm) closed-cell acrylic foam core that delivers strength and conformability on contoured surfaces. A high performance plasticizer-resistant acrylic adhesive is applied to both sides, and delivers high peel and shear adhesion.

Part#

MMM06394

1/2” x 15’

1/2” x 60’

7/8” x 15’

7/8’ x 60’ Size

NORTON FACTORY GRADE ATTACHMENT TAPE

High-performance black double-sided acrylic tape with blue easy-release polypropylene liner offers a quick and easy alternative to versatile adhesive bonds to medium and high-surface energy plastics, taking the guesswork out of choosing the right tape for the right part.

Part# Size

NOR98650 NOR98652

1/2” x 5 yds

7/8” x 5 yds

3M AUTOMOTIVE ADHESION PROMOTER

Convenient liquid primer for enhancing the adhesion of 3M™ Acrylic Foam Tapes in automotive applications. This adhesion promoter works with most LSE plastics used for interior and exterior automotive trim and parts. Fast-drying fluid is available in .85 oz. (2.5 cc) sponge applicator packets, each covering up to 150 sq. in.

Part#

MMM06396

ABRASIVES

3M CUBITRONTM II CLEAN HOOKITTM

ABRASIVE DISCS

Used for paint stripping, body filler sanding and featheredging. Precision shaped grain slices through paint and body filler, wear evenly, and provides long life and consistency.

MMM31476 MMM31477 MMM31478 MMM31370 MMM31371 MMM31372 MMM31373 MMM31374 MMM31481 MMM31482 MMM31483 MMM31484 MMM31485 MMM31486 MMM31487 MMM31491 MMM31375 MMM31376 MMM31377

3M CUBITRON II HOOKIT ABRASIVE SHEETS

These ceramic abrasives cut much more efficiently than other conventional ceramic abrasives cut much more efficiently than other conventional ceramic abrasives allowing users to realize significant improvements in the cut speed and life of each sheet.

3M CUBITRON II HOOKIT CLEANING SANDING SHEET ROLLS

Developed for superior cut and long life during key stages in auto body repair. Its long lasting triangular shaped grain and multi hole pattern for superior dust extraction make the sheet ideal for paint removal, rough body filler shaping, fine feather edging or final prep before blending or priming.

3M CUBITRON II FIBRE DISCS

Grains are electrostatically oriented on abrasive surface for efficient cut, even wear. Precision Shaped Grain (PSG) technology employs microreplication for extremely uniform abrasive Stiff fiber backing and a strong resin bond lends this disc long life and tear resistance.

MMM27638

3M CUBITRON II ROLOCTM FIBRE DISCS

Built for grinding, weld blending, deburring and other tough metal finishing jobs. A tough, hard, sharp ceramic abrasive that is resin-bonded to a stiff fiber backing. This disc lasts significantly longer than conventional ceramic grain discs, delivering a lower cost per grind with fewer disc changes.

GRINDING

ABRASIVES

3M CUBITRON II FILE BELTS

A top alternate to spot weld drilling, providing improved control and ease of use for spot weld removal and many common body shop metal grinding applications. Precision shaped grain technology provides improved cuts, a more consistent finish and two times more belt life while running cooler than conventional ceramic abrasives.

3M HOOKIT DUST FREE FLEXIBLE ABRASIVE DISCS

These versatile discs provide excellent cut and finish performance with high flexibility, anti-loading technology, and conformability.

MMM34403 MMM34405 MMM34406

MMM34407 MMM34408 MMM34409 MMM34800 MMM34801

MMM34802 MMM34803

3M IMPERIAL HOOKIT ABRASIVE DISCS

Coarse grade aluminum oxide mineral abrasive is ideal for aggressive jobs including stripping paint to bare metal, shaping and sanding plastic filler and more.

3M PURPLE FINISHING HOOKIT ABRASIVE DISCS

Aluminum oxide abrasive cuts fast, lasts a long time, resists loading with or without hole pattern designs and leaves a consistent, easy-to-polish finish.

MMM30371 MMM30368

MMM30367

MMM30366 MMM30671 MMM30670 MMM30669 MMM30668

MMM30667 MMM30666

3M PURPLE FINISHING HOOKIT DUST FREE ABRASIVE DISCS

Offers high flexibility and conformability, premium quality delivers uniform, consistent finishes every time, Reduced burn through when sanding thin coated surfaces.

3M HOOKIT BLUE ABRASIVE SHEETS

A specially designed multi-hole pattern captures dust, reduces loading and extends sheet life. Best-in-class performance at every stage of paint prep and coatings removal.

3M TRIZACT HOOKIT ABRASIVE DISCS

These foam-backed abrasive discs are designed for scuffing and sanding blend panels, texture matching orange peel, and removing sand scratches prior to paint blending on adjacent panels.

3M STIKITTM BLUE ABRASIVE DISCS

Premium aluminum oxide mineral is blended with ceramic grain for a full range of sanding applications. An anti-loading coating reduces loading from dust and extends disc life. Stikit adhesive attachment make changing discs quick and easy.

MMM36200

MMM36202

MMM36204 MMM36205

MMM36206

MMM36207 MMM36208

MMM36210 MMM36211 MMM36212 MMM36213 MMM36214

ABRASIVES

3M HOOKIT BLUE

ABRASIVE DISCS

Engineered for best-in-class cut, life and efficiency across your entire shop. The disc features a tough ceramic blended with premium aluminum oxide mineral for just the right balance. Delivers consistently excellent results in a minimum amount of time, on jobs ranging from aggressive paint removal and fresh filler sanding to blend preparation and sanding primer.

3M STIKIT BLUE ABRASIVE SHEETS

Engineered ceramic mineral blend is balanced for maximum abrasive performance in its class. Easy to attach and remove with Stikit adhesive.

3M GREEN CORPSTM FIBRE DISCS

Designed for grinding door skins, MIG welds and other applications on metal, plastic or fiberglass. Offering an exceptionally fast cut and extreme durability and featuring 3M™ Ceramic Abrasive Grain, these discs are available in a wide selection of sizes, grits and grades to maximize work efficiency.

3M GREEN CORPS ROLOC

ABRASIVE DISCS

Coarse grinding disc for removing paint, rust and welds in collision repair. Its small diameter makes it especially useful in hard-to-reach areas. Convenient Roloc™ attachment securely locks the disc in place with a simple twist, and allows for disc removal just as easily.

3M GREEN CORPS FILE BELTS

Removes spot weld and hem flanges as well as grinds in tight areas for fast and efficient removal of paint, corrosion and rust. Aluminum oxide abrasive delivers a fast cut and long life.

3M GREEN CORPS STIKIT

ABRASIVE DISCS

Strips paint to bare metal as well as shapes and sands plastic filler. Green Corps™ abrasives are built E weight backing to make them extremely durable for sanding paint, metal or fiberglass. Ceramic aluminum oxide mineral blend delivers a fast cut and long life.

*Grinding

3M GREEN CORPS HOOKIT ABRASIVE DISCS

These abrasive discs combine features for smooth, even sanding on tough surfaces. Grade 36 - 100 ceramic and aluminum oxide blend abrasive is resin bonded to durable E weight paper backing, with open coat construction that reduces loading even on fresh filler. These discs are ideal for shaping plastic filler and putty, paint removal and scratch refinement on bare metal.

MMM00516

MMM00515

MMM00513

MMM00512

MMM00616

MMM00615

MMM00612

MMM00525

MMM00524

MMM00522

MMM00521

MMM00520

MMM00625

MMM00624

MMM00621

ABRASIVES

3M GREEN CORPS

SHEETS

80 grit sheets are ideal for various applications on metal, fiberglass and plastic common in auto body repair.

*Paint Removal

3M GREEN CORPS STIKIT ABRASIVE SHEETS

Shapes plastic filler and strips paint to bare metal. These abrasives are built on E weight backing to make them extremely durable for sanding paint, metal or fiberglass. Abrasive sheets feature an anti-loading stearate coating. Ceramic aluminum oxide mineral blend delivers a fast cut and long life.

3M HOOKIT GOLD PAPER ABRASIVE DISCS

Precision-coated for long life during auto body sanding projects requiring moderately coarse grit abrasives. Open coat aluminum oxide abrasive and C-weight paper backing provide durability and a long-lasting cut for rough featheredging or shaping plastic filler and putty. Load-resistant coating and available 6-hole pattern provide superior dust resistance.

3M GREEN CORPS HOOKIT ABRASIVE SHEETS

Grade 36 to 100 ceramic and aluminum oxide blend abrasive is resin bonded to durable E weight paper backing, with open coat construction that reduces loading even on fresh filler. Sheets are ideal for shaping plastic filler and putty, paint removal and scratch refinement on bare metal.

MMM00920

MMM00919

MMM00918

MMM00917

MMM00916

MMM00915

MMM00914

MMM00913

MMM00912

MMM00983

MMM00982

MMM00981

MMM00980

MMM00979

MMM00978

MMM00977

MMM00975

MMM00973

MMM00972

*Paint Removal

3M STIKIT GOLD PAPER

DISC ROLLS

Features a tear-off disc format in a single roll, making them exceptionally fast and easy to use. Aluminum oxide mineral abrasive delivers an aggressive cut. Stikit™ adhesive attachment makes changing the discs quick and easy.

3M HOOKIT GOLD PAPER ABRASIVE SHEETS

Built for long life during auto body hand sanding projects requiring coarser grit abrasives. Open coat aluminum oxide abrasive and durable C-weight film backing provide a long-lasting cut and excellent loading resistance for rough featheredging or shaping plastic filler and putty.

*Surface Preparation

3M STIKIT GOLD PAPER ABRASIVE ROLLS

Features continuous lengths of C-weight paper, easily cut to size to greatly reduce product waste. Aluminum oxide mineral abrasive delivers an aggressive cut and uniform finish during collision repair. These sheet rolls feature Stikit™ adhesive backing, making them exceptionally fast and easy to attach and remove using power or hand sanding equipment.

MMM02599

MMM02598

MMM02597

MMM02596

MMM02595

MMM02594

MMM02593

MMM02591

MMM02590

MMM02589

ABRASIVES

Features a single roll tear-off disc format and Stikit adhesive attachment, making it fast and easy to use. Aluminum oxide mineral abrasive with film backing balances aggressive cut with a consistent finish. Antiloading coating and available 7-hole pattern help clear dust from the disc surface for longer life.

3M HOOKIT FINISHING FILM

Ideal for auto body applications including blending, scuffing, paint prep and removing paint defects. Choose aluminum oxide mineral cutting surfaces from P600 to P1500, all on durable film backing. Several versions of the disc feature our 5- or 6-hole design to help keep dust away from the disc surface.

MMM00910

MMM00909

MMM00908

MMM00907

MMM00971

MMM00970

MMM00969

MMM00968

MMM00950

3M STIKIT FINISHING FILM

A tough, consistent backing ideal for close tolerance finishing work including paint preparation and removing paint defects. Aluminum oxide mineral abrasive stays sharp longer and resists loading for extended disc life for standard collision repair applications.

3M STIKIT RED ABRASIVE DISCS

An economical disc that delivers reliable performance. These discs are ideal for standard jobs such as filler shaping, featheredging, paint prep and finish.

3M HOOKIT RED ABRASIVE DISCS

Features aluminum oxide mineral abrasive on A-weight or durable D-weight paper backing depending on grade. These discs are ideal for standard jobs such as filler shaping, featheredging, paint prep and finish.

MMM01261

MMM01224

MMM01223

MMM01222

MMM01221

MMM01220

MMM01219 MMM01218

MMM01191

3M STIKIT RED ABRASIVE SHEETS

Best-in-class performance at a very high value in collision repair. It features aluminum oxide, a longlasting, fast-cutting abrasive, on durable D-weight paper backing. These sheet rolls are ideal for projects from filler shaping to featheredging to paint prep and finish.

3M HOOKIT RED ABRASIVE SHEETS

An economical option for sanding and shaping a variety of substrates common to automotive repair jobs. This abrasive product is ideal for professional auto body mechanics and car owners.

3M STIKIT RED ABRASIVE ROLLS

Delivers best-in-class performance at a very high value in collision repair. These sheet rolls are ideal for projects from filler shaping to featheredging to paint prep and finish.

MMM01688

MMM01687

MMM01686

MMM01685

MMM01684

MMM01683 MMM01682 MMM01681

NORTON A275 ALUMINUM OXIDE NO-FIL PSA PAPER ABRASIVER DISCS

Premium heat-treated grain and B-weight latex fiber reinforced paper backing. 30% to 50% faster cut rate. FEPA P-graded grain and superior bond system. Eliminates the risk of color transfer.

*Paint

NORTON A275

Sandpaper technology at its best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper. Quick change hook and loop fastening system locks and unlock each and every time. Provides cooler cutting action and a finer finish.

NORTON A275 A/O B WEIGHT PSA PAPER ROLLS

PSA backed, so you can peel them off easily and stick them on at any length, quickly.

NOR31691 NOR31689 NOR31687 NOR31686 NOR31683 NOR31681

NORTON GOLD RESERVE A296

NO-FIL HOOK & LOOP

C-WEIGHT PAPER ABRASIVE DISCS

P grade premium, strong paper backing, water based, non-loading stearate. Quick change hook and loop fastening system locks and unlocks each and every time. Provides cooler cutting action and a finer finish.

NOR06236

NOR06232

NOR06231

NOR06229

NOR06227

NOR06226

ABRASIVES

NORTON GOLD RESERVE A296

NO-FIL PSA PAPER DISC ROLLS

P grade premium, strong paper backing, water based, non-loading stearate. Produces a quick, cool cut with more consistent scratch pattern. Comfortable, flexible, and tear resistant. Resists loading and increases productivity.

NORTON BLAZE A995 MULTI-AIR CYCLONIC CERAMIC VACUUM

NO-FIL PAPER DISCS

Durable, high-performance sanding disc with ceramic grain for fast cutting, No-Fill technology to prevent clogging, and optimized vacuum holes for superior dust extraction. Ideal for heavy-duty sanding on various materials.

NOR97505

NOR97506

NOR97507

NOR97508

NOR97509

NOR97516

NOR97517

NORTON BLAZE A995

MULTI-AIR CYCLONIC CERAMIC SANDING ROLLS

NOR12633*

*Tabbed

NORTON GOLD RESERVE LONGBOARD SANDING SHEET

Can be used on a hand file board with velcro attachment or any pneumatic air sander with velcro attachment. Works great for shaping and leveling body filler.

High-performance sanding with premium ceramic grain for fast, aggressive cutting. Designed with No-Fill technology to prevent clogging and a MultiAir hole pattern for excellent dust extraction, they are ideal for heavy-duty sanding on wood, metal, and composites. Durable and efficient, they provide smooth and consistent results.

R980P SG BLAZE PLUS

S-FLEX FILE BELTS

High-performance abrasive belts engineered for demanding applications. They utilize ceramic alumina grain for rapid material removal, cooler cutting, and extended belt life.

NORTON DRY ICE A975 CERAMIC NO-FIL HOOK & LOOP PAPER DISCS

Deliver fast, efficient sanding with premium ceramic grain for aggressive cutting. Featuring No-Fil technology to prevent clogging and a hook-and-loop attachment for easy disc changes, they are ideal for heavy-duty sanding and finishing on various materials. Durable and designed for smooth, consistent results.

Features Blaze ceramic alumina grain for fast cutting, excellent durability, and extended belt life. The PlyWeld construction and flexible backing allow it to conform to contours and hard-to-reach areas, making it ideal for precision work on metal, especially in fabrication, aerospace, and maintenance applications.

NORTON BLAZE F980 GRINDING DISC

Made with a 100% alumina micro fracturing grain that continuously exposes sharper grain edges and provides a significantly increased cut rate and life compared to competitive blended or low ratio ceramic alumina discs.

NORTON DRY ICE A975 MULTI-AIR CYCLONIC CERAMIC VACUUM NO-FIL ABRASIVE DISCS

Premium ceramic grain for fast, aggressive sanding. With Multi-Air Cyclonic hole patterns for superior dust extraction and No-Fil technology to prevent clogging, these discs provide long-lasting performance.

NORTON A975

DRY ICE CERAMIC SHEET ROLLS

ABRASIVES

P-graded, 100% SG ceramic alumina abrasive delivers fastest cut rate and longest life of any paper roll. Flexible latex-saturated backing for 50-60% improvement in tear strength and longer life in all applications. Best choice for the most demanding coarse grit dry sanding applications.

NORTON BLUEFIRE H875P ZIRCONIA ALUMINA PAPER DISCS

With zirconia alumina grain, these discs deliver fast cutting action and long-lasting durability. Ideal for metalworking, woodworking, and composites, they offer superior material removal and resist wear, making them suitable for heavy-duty applications.

NORTON A975 DRY ICE NORGRIP CYCLONIC SHEET ROLLS

Premium abrasive rolls designed for fast, efficient sanding and finishing. Featuring a blend of ceramic alumina and heat-treated abrasive grains, these rolls provide superior cutting performance and longer life. The NorGrip backing ensures easy attachment and removal, while the Cyclonic technology offers enhanced dust extraction for cleaner workspaces.

NOR23596*

*Vacuum

NORTON BLUEFIRE H875P ZIRCONIA ALUMINA PAPER FILE SHEETS

Durable abrasive sheets designed for precision sanding and finishing. They feature a zirconia alumina grain, providing fast material removal and long-lasting performance. The backing is flexible, allowing for easy contouring to different surfaces. Perfect for use with hand file sanders in automotive, woodworking, and industrial settings.

NORTON Q175 PURE ICE FILM HOOK-AND-LOOP PAPER DISCS

Precision sanding discs designed for a smooth, consistent finish. Made with a durable film backing, they offer excellent tear resistance and longer life compared to traditional paper discs. The hook-and-loop attachment system ensures quick and easy disc changes.

NORTON SUPER SUPERFLEXIBLE FILM SANDING DISCS

Durable yet flexible film backing conforms better to surfaces and contours, preventing over sanding or burn through. Anti-loading stearate for optimum performance and long life. Consistent scratch pattern for an even finish.

NORTON BEAR-TEX NON-WOVEN THIN-FLEX BLEND DISC

NORTON BLACK ICE NORGRIP DISCS

Designed for ultra-fine finishing. Made with premium silicon carbide abrasive, it is ideal for wet or dry sanding applications on metal, composites, and painted surfaces. The hook-and-loop NorGrip system ensures easy disc changes and secure attachment for efficient sanding.

Its thin, flexible construction allows it to conform to contours and irregular surfaces, ensuring smooth, even results. Made from non-woven material, it delivers consistent performance without removing too much material, making it ideal for light deburring, cleaning, and surface blending on metals and other materials.

NORTON R228 STICK & SAND ALUMINUM OXIDE SANDING DISC

Versatile sanding solution designed for fast and efficient surface preparation. Its pressure-sensitive adhesive backing allows for easy attachment and removal, making it perfect for quick changes during sanding tasks.

ABRASIVES

NORTON RAPID PREP A/O

NON-WOVEN FILE BELTS

Engineered for efficient surface preparation, blending, and finishing tasks. Made from aluminum oxide abrasive and offers a non-woven construction that provides consistent results without altering the substrate. Ideal for use on various materials, including metals and composites, and are perfect for light deburring and surface conditioning.

NORTON CONVOLUTE NON-WOVEN

ABRASIVE WHEEL

Durable tool used for deburring, finishing, and polishing. Made from layered non-woven nylon with abrasive particles, it provides a consistent finish on metals and composites without altering the material’s shape, ideal for precision work.

NORTON CUT-OFF WHEELS

The ultimate choice for cool, easy, free cutting of sheet metal, or heavy duty cutting of muffler clamps, bolts, and steel rods, as well as spot weld grinding.

x 3/16” x 3/8”

x 1/32” x 3/8”

NORTON GEMINI FREE CUT D SIDES

REINFORCED TYPE 01

CUT-OFF WHEELS

Reinforced for added strength, these wheels offer precision cutting while minimizing burrs and material waste. Ideal for use in metal fabrication, maintenance, and repair applications, they provide consistent performance and long wheel life. Suitable for use with stationary or portable cut-off machines.

S&G TOOL AID CUT-OFF WHEELS

Easier and safer to control than a torch, faster, and less effort than a hacksaw. Cuts through clamps, hangars, sheet metal, angle iron, tubing, castings, mufflers and rusted bolts.

SGT94860

SGT1150 3” x 1/16” x 3/8” 3” x 1/16” x 3/8” 5 50

3M WETORDRY

5 1/2” x 9” ABRASIVE SHEETS 434Q

• Silicon carbide mineral abrasive provides a refined cut without heavy manual pressure

• Durable C-weight backing holds up with less curling

• 50 sheets per pack

3M WETORDRY

5 1/2” x 9” ABRASIVE SHEETS 401Q

• Convenient sheet can be used wet or dry on paint, primer, gel coat and metal

• Waterproof backing supports wet applications for decreased loading and a faster cut

• Silicon carbide mineral is our fastest-cutting abrasive for a superior finish

• 50 sheets per pack

3M WETORDRY

9” x 11” ABRASIVE SHEETS

• Aluminum Oxide abrasive cuts fast and provides a consistent, fine finish

• Light, A-weight paper backing offers excellent flexibility in hands on applications

• Resin bonding resists deterioration from heat, extending the life of the abrasive cloth

• 50 sheet per pack

3M WETORDRY

9” x 11” TRI-I-MITETM PAPER SHEETS

• Versatile sheet can be used wet or dry on paint, primer, gel coat, metal, and wood finishes

• Strong C-weight paper backing provides durability for either hand or machine sanding

• 50 sheets per pack

MMM02014

MMM02007

MMM02006

MMM02004

MMM02002

MMM02001

MMM02000

3M 9” X 11” PAPER SHEETS

• Tough aluminum oxide abrasive cuts fast and performs well on many surfaces

• Load resistant open-coat feature enables longer use before replacement

3M FLEXIBLE

ABRASIVE HOOKIT

5 1/2” x 6 3/4” HAND SHEETS

ABRASIVES

• Thin film-backed sheet is extremely flexible for fine sanding, wet or dry

• Longer lasting – provides better “feel” for surfaces to minimize burn-through

• Conformable – perfect for sanding hard-to-reach spaces such as door pockets

• 25 sheets per pack

3M TRIZACTTM HOOKIT FOAM SHEETS

Designed for removing sand scratches can reduce the possibility of swirl marks, burn through, and other defects caused by more aggressive processes. Helps increase shop productivity by eliminating the need for aggressive wool compounding pads and reducing polishing time.

3M SOFTBACK

SANDING 4 1/2” x 5 1/2” SPONGE SHEETS

• Flexible foam backing adapts to unique contours and access hard-to-reach areas

• Aluminum oxide abrasive offers a long life and fast cut

• Waterproof bonding system allows for either wet or dry sanding applications

• 20 sheets per pack

3M FINESSE-ITTM

IMPERIALTM WETORDRY SCALLOPED DISCS

• Small-diameter disc is great for buffing, polishing and finishing on small surfaces

• Light A-weight paper backing helps abrasive stay agile without significantly gouging or damaging surfaces

• May be used with water and/or compounds

• 10 sheets per sleeve

3M SOFTBACK

SANDING 4 1/2” x 5 1/2” SPONGE SHEETS

• Tough aluminum oxide abrasive mineral cuts fast and performs well on metal

• Flexible cloth backing makes a good general purpose abrasive for dry sanding

• Closed coat construction provides a consistent, fine finish

• 1 roll per box

MMM05028 MMM05027 MMM05026MMM05024 MMM05022 MMM05021

NORTON

A275 ROTOLO SANDING FOAM ROLL

A flexible sanding solution designed for detailed surface preparation on a variety of materials. Featuring a durable foam backing, it easily conforms to contours and curves, ensuring an even finish. Provides consistent performance for fine sanding and polishing tasks.

3M WETORDRY NO. 20 SPONGE PAD

• Sized for easy use and to accept a variety of abrasive sheets

• Soft material supports abrasives for consistency and control

• Durable pads hold up during wet or dry sanding

MMM05526 2 3/4” x 5 1/2”

3M WETORDRY RUBBER SQUEEGEE

• Squeegee wipes away swarf and water from work surface

• Accessory is also used for smoothing filler and putty

• Rubber is firm with just enough flexibility to be gentle on surfaces

MMM05518 2 3/4” x 4 1/4” 3” x 2”

Used for applying glazing putty and plastic filler

Used for removing slush created with sanding with water

3M WETORDRY BUCKET

• Designed specifically for wet sanding

• Rubber construction adds flex and durability

• Handle tips feature rubber-coated stoppers to protect vehicle surfaces

ABRASIVES

3M SCOTCH-BRITETM HAND PADS

• Superior alternative to steel wool, wire brushes, sandpaper, and other nonwoven products for cleaning or finishing tasks

• Very fine grade aluminum oxide abrasive cleans, finishes, grains, denibs, and defuzzes

• Suitable for use on wood, metal, plastics, ceramics, porcelain, rubber, or composites

• 20 per box

3M SCOTCH-BRITE LIGHT CLEANSING HAND PAD

• Ideal for gentle cleaning on vinyl, porcelain and other delicate surfaces

• Light-duty non-woven pad performs light cleaning on a variety of metals as well as wax mold deflashing

• Very mild abrasive provides gentle yet thorough cleaning

• 20 per box

NORTON BEAR-TEX SCUFF PADS

The perfect mix of consistently graded grain in an advanced resin system makes for an amazingly fast cut with a finish that’s noticeably better than other pads. A super fast cut without wild scratches.

NORTON SOFTTOUCH SPONGES

Superior flexibilty for hand sanding or finishing flat, curved, or hard-to-reach areas. Use wet or dry.

3M SCOTCH-BRITE

FLEX HAND PADS

• Superior alternative to steel wool, wire brushes, sandpaper, and other nonwoven products for cleaning or finishing tasks

• Suitable for use on wood, paints, metal, plastics, ceramics, porcelain, glass, rubber or composites

• Reusable pad resists tearing, splintering, loading and will never rust, providing a long, useful life

• 25 sheets per box

3M SCOTCH-BRITE HAND PAD PROS

• Superior alternative to steel wool, wire brushes, sandpaper, and other non-woven products for cleaning or finishing tasks

• Very fine grade aluminum oxide abrasive cleans, finishes, grains, denibs, and defuzzes

• Pad resists tearing, splintering, shredding, loading and will never rust, providing a long, useful life

• 20 sheets per box

3M SCOTCH-BRITE PREP SCUFFS

• Prep E-coated panels quickly and evenly

• Scuffs fast without leveling

• Scuffs fast and leaves a fine finish

• Use for prep of color-coat areas and blending applications

• Ideal for gold/silver/pearl metallic paint prep

• Prep clear-coat areas and critical blends

• Easy perforated pad

3M SCOTCH-BRITE HAND PAD PROS

• Faster, easier scuffing action – but not coarser

• Use for woodworking, metalworking, synthetic fabrication and maintenance operations

• Available in three color-coded grades, gray fine grade, purple Very Fine and copper Ultra Fine

• 60 sheets per roll

ABRASIVES

3M SCOTCH-BRITE DURABLE FLEX LOW STRETCH BELTS

• Tough, long-lasting nonwoven belt is effective for deburring, blending and cleaning

• Offers great edge durability

• Higher flexibility resists chunking and performs well on belt sanders with small contact wheels

3M HOOKIT CONVERSION FACE

• Provides economical and convenient solutions for optimizing non-woven disc use

• Features nylon loop backing for secure attachment to back up pad

3M SCOTCH-BRITE 6” SCUFFING DISCS

• Nylon fibers in open web won’t splinter or rust, providing a great alternative to steel wool abrasives

• Versatile selection of grades and minerals to ensure operators find the right disc for their specific application

• Open web is load resistant, preventing abrasive from getting clogged with debris and prolonging service life

3M SCOTCH-BRITE ROLOC + CLEAN AND STRIP XT PRO DISCS

• Quickly removes rust, paint, mill scale and coatings from metal

• High-strength fiber resists chunking and performs well on edges

• High conformability provides a larger contact patch for faster removal rates

NORTON® BEAR-TEX® CONDITIONING DISCS

Ideal for surface finishing applications such as removing surface defects, oxides and corrosion, deburring, mold cleaning and blending uneven edges and marks across industries ranging from aerospace and transportation, to energy and metal fabrication.

• Built for consistency in blending, cleaning, deburring, finishing, grinding, polishing, radiusing, refining, and surface preparation, depending on the chosen grade

• Springy nonwoven fibers resist loading, conform to irregular or contoured surfaces, and minimize undercutting and gouging

• This multipurpose option is great for use on aluminum, mild steel, nickel alloy, stainless steel, and titanium

3” Coarse Grit - Vortex Rapid Prep

3” Very Fine Grit- Rapid Prep

2” Medium Grit - Rapid Prep

2” Coarse Grit - Rapid Prep

NORTON MERIT NON-WOVEN QUICK CHANGE BUFFING DISC

A versatile tool for surface finishing, polishing, and light deburring tasks. Made from durable non-woven material, provides a consistent finish without damaging the workpiece. Quick-change attachment system allows for fast and easy disc replacements, improving efficiency in polishing and finishing applications on metals, composites, and other materials.

ABRASIVES

NORTON BLAZETM STRIP/BLENDING DISCS

Designed for surface preparation and blending, these discs provide aggressive cutting action, long-lasting durability, and consistent finishes. Ideal for removing rust, paint, and scale from metal surfaces, they offer exceptional efficiency and reduced downtime in industrial settings.

4” Rapid-Strip TR Discs

4” x 1/4” Hole Rapid Strip Discs

2” Rapid-Strip Speed-lok Discs

2” Vortex - Strip Speed-lok Discs

3” Rapid-Strip Speed-lok Discs

3” Rapid Blend Discs

2” Backing Pad NOR55103

3” Backing Pad NOR55105

3M SCOTCH-BRITE ROLOC GENERAL PURPOSE SCUFFING WHEEL

• Designed with cleaning and scuffing applications in mind

• Its spongy open web make it ideally suited for surface prep and cleaning

• Ideal for machine scuffing and cleaning of hard reach areas

3M SCOTCH-BRITE RIVET CLEANING DISCS

This tough, tightly layered disc achieves a close fit against and between rivets and leaves behind a clean, consistent finish while maintaining the geometry of the workpiece.

3M SCOTCH-BRITE ROLOC DISC PAD ASSEMBLY

This tough, tightly layered disc achieves a close fit against and between rivets and leaves behind a clean, consistent finish while maintaining the geometry of the workpiece.

3M ROLOC HOLDER

• Holder provides secure support and smooth performance for quick change Roloc products

• Attaches to right angle disc sanders or straight shaft die grinders equipped with ¼” or 6 mm collets

3M WHEEL MANDREL

A small but mighty abrasive accessory, engineered to allow attachment to Clean and Strip Discs to common 1/4” collet equipped power tools.

3M SCOTCH-BRITE ROLOC BODY MAN’S BRISTLE DISCS

• Molded, abrasive-filled bristles strip, deburr, blend, finish, polish, clean, and remove coatings more effectively, with less pressure than wire brushes

• Flexible bristles require less pressure than wire brushes and conform to contours, even on complex parts

3M SCOTCH-BRITE ROLOCTM BRISTLE DISCS

• Molded, abrasive filled bristles strip, deburr, blend, finish, polish, clean, and remove coatings more effectively than wire brushes

• Bristle spacing is ideal for coating removal and other high-loading substances

NORTON THIN NORGRIP SOFT INTERFACE PAD

ABRASIVES

Designed to improve sanding precision and surface finish. It adds cushioning between the abrasive disc and the work surface, allowing for smoother, more controlled sanding, especially on contours and curves.

NORTON MULTI-AIR CYCLING BACK-UP PAD

Designed for use with Multi-Air abrasive discs. It features a vented design that enhances dust extraction, improving sanding efficiency and creating a cleaner work environment.

3M KUT-DOWN DISC ADAPTER

• Increases shop grinding capabilities and efficiency

• Makes grinding more portable for greater volume and for hard-to-reach areas

3M 3” DISC KUTS

• Extremely coarse grades down to 24 grit for effective grinding and include a built-in backing plate that provides durable support and easy adapter attachment

• Edges can be trimmed and refreshed so you can keep your discs longer and minimize wasted material

3M GREEN CORPS REINFORCED WELD GRINDING WHEELS

A tough fiberglass cloth screen scrim adds reinforced performance and longer wheel life, and supports aluminum oxide mineral abrasive.

3M GREEN CORPS CUT-OFF WHEELS

Durable, fast-cutting wheel useful for cutting autobody sheet metal, frame rails, exhaust pipes, clamps, and rusted bolts.

MEGUIAR’S® MIRROR GLAZE® PROFESSIONAL UNIGRIT® SANDING BLOCKS

3M CUBITRON II CUT-OFF WHEELS

• Cut-Off Wheels with Precision Shaped Grain are engineered to cut faster than competitive ceramic products offering significant productivity gains.

• The collision repair professionals value its fast cutting action on heat-sensitive metals and its cutting efficiency, yielding 2 to 7x more cuts than conventional cut-off wheels in many cases.

• 5 wheels per box

3” x 1/25” x 3/8”

x 1/16” x 3/8” 4” x 1/25” x 3/8”

4 1/2” x 1/25” x 7/8”

S & G TOOL AID CUT-OFF WHEEL ARBOR

Allows any die grinder or drill to be turned into a cut-off tool using either 1/4” or 3/8” Cut-Off Wheels

• Excellent for completely removing runs, sags, and other small, isolated defects on top of any paint surface

• Precise, uniform grit particles leave a smooth, even sanding pattern that’s easy to clean and polish to a flawless finish

PROMOTORCAR® SANDING PEN

• Removes rust paint and wax for auto touch up paint

• Preps metal surfaces for hardness testing

• Polishes medals, coins, and small instrument parts

ABRASIVES

MOTOR

GUARD® WONDERING BLOCK SUPREME BLOCK

Rugged, ergonomically designed block designed for maximum gripping power over flat to slightly curved surfaces. Designed for all typed of paper, this block flexes to conform to the panel shape.

MOTOR

GUARD SCUFF PAD SOFT BACKER BLOCK

A soft and flexible scuffing pad designed for areas not suited for rigid scuffing blocks. This pad is flexible yet evenly distributes pressure over curved surface, imparting an even “tooth” over the entire panel with a single pass.

MOTOR GUARD SOFT BLOCK FLEXIBLE SANDING BLOCK

This unique sanding block utilizes two different densities to achieve the ultimate in block sanding of curved or irregular shaped surfaces.

3M HOOKIT FLEXIBLE ABRASIVE FOAM PAD

Works in combination with abrasive sheets for sanding primer, blending and paint finishing. When used together for hand sanding, the foam pad and abrasive sheets are able to sand hard-to-reach locations.

MOTOR GUARD SCUFF PAD HARD BACKER BLOCK

Its power hooks firmly retain the scuff pad, imparting an even tooth over the entire panel with a single pass. Wet or dry, primers or E-coats, this is the block to scuff with.

3M FLEXIBLE

ABRASIVE HOOKIT INTERFACE FOAM PAD

Offers exceptional versatility with its ability to work as either a hook-in attachment or loop-in attachment pad. The foam acts as a flexible cushion that follows automotive body curves and contours, delivering consistent and uniform results all over the car.

MTGWB-1

MTGBBS-1

MTGSB-1

Part# Part#

3M STIKIT SOFT HAND PAD

Ideal for collision repair jobs requiring a light touch, such as sanding around contours and light scuff sanding. Soft but durable pad helps technicians maintain a good “feel” even for irregular surfaces, helping ensure consistent.

3M HOOKIT SOFT INTERFACE PAD

• Adds cushion and conformability to 3M Hookit™ back-up pads for auto body sanding applications requiring precision across uneven surfaces.

• Increases abrasive cut and enables more consistent contact of abrasive discs around surface contours, plus the pad allows closer sanding to edges for smoother, more refined finishes.

• 10 pads per case

3M XTRACT LOW PROFILE BACK-UP PAD

Low profile firm density foam and blunt 35 degree tapered edge provide durability and an aggressive cut. Use with random orbital sanders wit 1/4” - 20 external threads.

3M HOOKIT CLEAN SANDING PADS

Excellent for auto body painting jobs such as following contours and sanding close to edges, while maximizing dust extraction.

3M HOOKIT HAND PAD

• Designed to fit 6” discs

• Helps to distribute finger pressure directly with less strain to your hands

• High quality materials resist long term wear and tear

3M STIKIT DISC HAND PAD

Durable 1/4” neoprene rubber construction eliminates finger marks while providing support and control for 6” abrasive discs. An elastic hand band makes the pad extremely comfortable to use.

ABRASIVES

3M HOOKIT HALF ROUND PAD

• Half Round Pad lets you sand quickly and effectively without the time, expense and lack of consistency that can come from sanding hard-to-reach areas.

• Its 1/4” edges, both straight and curved, help for sanding into contours or on thin vertical surfaces

• 20 pads per case

3M HOOKIT DISC PADS

• Used for a broad range of auto body projects including shaping plastic filler, paint stripping, primer sanding and low-speed polishing or grinding.

• Medium density foam bodies provide support and also provide some flex for good conformability.

3M STIKIT DISC PADS

For use with disc, random orbital, and rotary sanders. They have a tough vinyl face that provides excellent disc adhesion yet allows quick, easy disc removal. 10 Per case.

3M STIKIT LOW PROFILE FINISHING DISC PADS

Density backup pad in 5” or 6” diameters for 5” and 6” abrasive discs. The soft density foam provides additional conformability and is ideal for final surface finishing applications following leveling and blending process steps. 10 per case.

3M HOOKIT LOW

DISC PAD

Designed for use with 6” Hookit™ discs. Affords more control and longer pad life during flat auto body sanding and with applications requiring coarse grades.

3M STIKIT SOFT DISC PAD

Engineered for sanding large areas of paint down to metal with coarse grade abrasives. Ideal for auto and marine body sanding applications, the pad’s soft density foam with a 45° tapered edge closely conforms to contours and curves to deliver a uniform finish and minimize rework.

3M STIKIT DISC PAD

Performs across a large variety of auto body sanding jobs from low-speed polishing and grinding to shaping plastic filler. Durable foam construction and tapered edges maximize performance with 6” or 8” abrasive discs.

NORTON CLOTH QUICK-CHANGE

Featuring a self-lubricating grain treatment that delivers fast cut rates and an improved resin bond system to ensure durability, this coarse-grit disc is ideal for stock removal, deburring and weld blending tasks.

3M HOOKIT HAND BLOCKS

Make hand sanding a more efficient task, which helps boost overall productivity when power sanding is not an option. Preferred for situations in which you need more precise control.

3M HOOKIT SOFT HAND BLOCK

With a contoured design meant to fit comfortably in the user’s hand, takes stress off your fingers, wrists and arms.

3M STIKIT HAND BLOCKS

Made of a sturdy, durable, high strength material. These blocks have an embossed rubber face which allows good adhesion for sheet-rolls and sheets.

3M STIKIT SOFT HAND BLOCK

Ideal for paint prep including leveling and block sanding around contours. Its soft but tough foam construction makes it easy to grip and to maintain a good “feel” for the primed surface, helping ensure consistent abrasive contact.

*Bluefire

ABRASIVES

3M RUBBER SANDING BLOCK

Professional grade tool that helps you achieve your best, fastest sanding work in auto body and other jobs. The pliable rubber block is designed to comfortably fit your hand and to keep sandpaper flat against automotive surfaces, helping ensure uniform sanding performance.

3M HOOKIT SANDING BLOCK KITS

3M FINESSE-IT HAND SANDING PAD

Two levels of firmness available for defect leveling and fine finishing. Crafted from durable rubber and designed to hold sanding or finishing discs with pressure sensitive adhesive. 10 per Bag and 20 per case.

3M HOOKIT SANDING BLOCK KITS

• Helps make sanding easier in difficult locations

• Firm structure that helps deliver more consistent sanding results

• Flexibility to allow users to sand concave or convex curves

3M STIKIT SANDING BLOCK KITS

• Helps make sanding more comfortable and more productive in hard-to-sand locations

• Bright yellow design helps sanding sticks stand out in dusty shop conditions

• Range of sizes increases capabilities for precision hand sanding of filler, primer and other substrates

3M HOOKIT HANDLE FILE BOARD

Helps level repair areas with greater ease. Use this accessory item with Hookit™ abrasive products to achieve more consistent, uniform sanding results. This hand block when used in combination with Hookit™ abrasives is ideal for achieving a true flat surface.

3M STIKIT HANDLE FILE BOARD

Ideal for two-handed auto body sanding where you need a rigid, flat abrasive surface. The body of this sturdy file board is made from hard, durable material that resists most solvents, and its face is embossed rubber, great adhesion and quick release, making for consistent, reliable sanding and fast change-outs.

SEM GUIDE COAT BLACK

An aerosol coating that helps detect low spots, sand scratches or other minor imperfections while sanding primer.

• Quick drying

• Improves production

• Won’t clog sandpaper

• Helps create a perfect repair

3M DRY GUIDE COAT CARTRIDGE AND KIT

Used to identify surface imperfections such as pinholes in body filler and deep scratches in primer. Unlike liquid and aerosol guide coats, Dry Guide Coat requires no masking before use, and there is no dry time after application.

Gram 50 Gram Cartridge and Applicator Kit

ADHESIVES & SEALANTS

FUSOR® NON-SAG SEAM SEALERS

Duplicates factory look on the following seams: truck beds, tooled door skin, floor pan, core support and any other application in which a non-sag cosmetic seam sealer is required and where slow, medium, or fast work time is desired.

FUSOR BARE METAL BRUSHABLE SEAM SEALER

Truck bed seams, tooled door skin seams, floor pan seams, core support seams and other applications where bare metal, brushable cosmetic seam sealer is required.

• Acrylic formula provides corrosion protection

• Perfect match to OEM brushed appearance

FUSOR CONTROLLED FLOW SEAM SEALER

Excellent for roof channels, door seams, drip rails and truck bed floor seams and trunk seams.

• Epoxy formula provides smooth continuous beads

• No tooling required for factory look

FUSOR SELF LEVELING SEAM SEALER

Drip rails, trunks, core support to aprons, roof seams and quarter panel to rear deck.

• Perfectly matches factory flow-grade seams

• No tooling required

• Permanently flexible

3M FACTORY MATCH SEAM SEALER

A two-part seam sealer suitable for the sealing of seams on primed or painted substrates such as steel or aluminum enclosures. This material provides excellent flexibility and elongation properties along with a medium/high viscosity and produces a slight flow-out after application. Seam Sealer may be top coated with paints in 45 minutes under normal conditions.

3M AUTOMIXTM BARE METAL SEAM SEALER

A two-part seam sealer for all general purpose automotive sealing needs that cures quickly to a tough, strong bead for lasting seam sealing protection. This includes door skins, floor pans, trunk floors, roof seams, and many other applications.

3M HEAVY-BODIED SEAM SEALER

3M CONTROLLED FLOW SEAM SEALER

Uses two part urethane technology to provide a tough flexible material for the sealing of joints on primed or painted substrates such as steel or aluminum enclosures. This material provides excellent flexibility and elongation properties along with a medium/high viscosity and produces a slight flow-out after application.

3M SELF-LEVELING SEAM SEALER

Designed for use in the auto body industry and is typically used to replace “roof division channel” sealers, this sealer is not recommended for the repair of vessels designed to contain liquids or liquids under pressure.

Two-part epoxy technology to provide a tough yet flexible material for the sealing of joints on primed or painted substrates such as steel or aluminum enclosures.

3M OEM MATCH EPOXY SEAM SEALER

A versatile family of epoxy seam sealers designed for use on bare metal or primed surfaces. These sealants are caulkable, toolable, brushable, and sprayable – meaning they can be used in a variety of applications, including door skins, floor pans, trunk floors, roof seams, and many others.

ADHESIVES & SEALANTS

SEM DUAL MIXTM SEAM SEALERS

A medium viscosity, two-component, epoxy sealer for sealing interior or exterior seams, joints and voids

• OEM recommended

• Direct to metal

• Paintable immediately

• Will not shrink, harden or crack

EVERCOAT CONTROL FLOW SEAM SEALER

An epoxy seam sealer with limited flow characteristics, ideal for use in sloped areas. The viscosity of this seam sealer allows for build without brush marks. Compatible with most topcoats.

FUSOR

SEM DUAL MIX

HEAVY-BODIED SEAM SEALERS

A high viscosity, two-component epoxy for use on interior or exterior seams, joints and voids.

• OEM recommended

• Direct to metal

• Paintable immediately with most solvent-based coatings

• Correct color minimizes post-inspection liability

DIRECT-TO-METAL

SEALERS

Duplicates factory seams where a non sag, toolable/brushable seam sealer is required.

• Single component direct-to-metal; no substrate primer required

• Non-sag

• Holds brush marks without die back

• Weld thru with no burn back

SEM DUAL MIX HIGH

BUILD SELF-LEVELING SEAM SEALERS

A two-component, controlled flow epoxy ideal for use on roof seams, drip rails and trunk seams.

FUSOR HIGH DEFINITION SPRAYABLE SEALERS

Creates flexible textured seams on floor pans, trunk pans and strut towers.

• Extremely flexible – won’t crack or peel

• Perfectly matches all OEM seamsand textures with use of Fusor 312Sprayable Seam Sealer Applicator

FIB6023

3M ALL-AROUND AUTOBODY SEALANT

• Medium-bodied, water-based sealer works well for both interior and exterior applications

• Formula adheres well to primed and painted surfaces

• Seals can be painted over after just 30 minutes

MMM08500

3M FAST ‘N FIRMTM SEAM SEALER

• Non-sagging for clean, efficient tooling in vertical and horizontal seams

• Stay productive with a fast setting sealer that’s tack-free in as little as 25 minutes

• Seals can be painted over after just 30 minutes

3M SEAM SEALER TAPE

Rubber backed tape holds up under tough conditions, reducing rework. Fast, effective means of duplicating the look and function of factory sealers. Immediately paintable, saving time vs. liquid sealers

3M URETHANE SEAM SEALER

General sealing of interior and exterior automotive seams including floor pans, hem flanges, frame rails, rear body panels, aprons and other seams including those requiring weld through applications using squeeze type resistance spot welding.

3M BRUSHABLE SEAM SEALER

A multipurpose, fast-drying seam sealer that is easily applied with a brush. The product will not flow or run after application.

3M URETHANE SEAM SEALER FOIL PACK

A non-shrinking, non-cracking, low-to-no odor formula remains flexible and offers superior results to solventbased sealers. Provides excellent performance in highheat and humid environments.

ADHESIVES & SEALANTS

3M MSP SPRAYABLE SEAM SEALER

A high-solids, moisture-curing seam sealer that can be caulked or sprayed as a sealer or a sound deadening coating. The sealer provides a fast method of sealing trunk and floor pan seams, quarter panel seams, and any other seam where a sprayed or coated appearance is necessary.

3M URETHANE SEAM SEALER FOIL PACK

Designed to work for both interior and exterior auto body joints. Onepart formula is ready to use without any mixing. Strong adhesion bonds to a variety of surfaces. Designed to be tack free in 30 minutes and immediately paintable.

Applicator Gun MMM08398

3M EZ SAND RIGID PLASTIC PARTS REPAIR KIT

• Designed for use as a filler and an adhesive

• Excellent for use on rigid plastic and fiberglass parts

• Epoxy-based adhesive is easy to sand

• Formulated for excellent featheredge

3M EZ SAND MULTI-PURPOSE PLASTIC REPAIR MATERIAL

A ready-to-use two-part epoxy finishing adhesive material that dries to a flexible hardness, ideal for repairing plastic parts such as bumper covers and body panels. It applies easily from a 3M applicator gun mixing nozzle, with no premixing or measuring. It is quickly sandable for excellent featheredge, paintable in as little as 30 minutes and a 4 hour cure time.

3M TPO PLASTIC PARTS REPAIR

Delivers excellent flexibility and high bond strength over a wide range of temperatures, and offers an extremely fast, 50-second work time ideal for small defects.

3M SUPER FAST PLASTIC REPAIR

Two part urethane formulated to be used on most plastic substrates as a fast cure bonding adhesive with excellent gap filling capabilities. Also functions for replacing and repairing broken or missing mounting tabs on plastic parts.

3M SEMI-RIGID PLASTIC PARTS REPAIR

This plastic repair adhesive offers a fast work time to enhance body shop productivity. Reinforces the backside of many semi-rigid plastic components used in automotive construction, including bumper covers. This highperformance, two-component urethane adhesive is recommended for the following types of plastic: Xenoy, RRIM, GTX, PPO and ABS.

FUSOR PLASTIC REPAIR ADHESIVE

Structural and cosmetic repair of bumpers, bumper tabs, emblems, door trims, interior and exterior plastic repairs and cosmetic repairs.

• Undetectable feather edge

• Faster than plastic welding

• Stronger than stapling

3M SEMI-RIGID PLASTIC REPAIR

Effectively repairs both one-sided and two-sided damage on a variety of automotive plastic components. This adhesive is commonly used for backside reinforcement repair, as well as general bonding.

FUSOR PLASTIC REPAIR ADHESIVE HEAT SET

Structural and cosmetic repair of auto and heavy duty truck composite, fiberglass, SMC and carbon fiber panels.

• One product for all body panels

• Easily bull’s-eyes, read-through, or halos

FUS90981

FUS10169

FUS90963

FUS10030

FUS90976

FUS10107

FUSOR PLASTIC FINISHING ADHESIVE

For cosmetic repair of all plastic bumpers and body panels.

• No plastic identification is required

• No adhesion promoters needed

• Epoxy formula sands to a perfect feather edge in 20 minutes or less

FUS90980 FUS10166

ADHESIVES & SEALANTS

FUSOR PLASTIC COSMETIC FINISHING ADHESIVE

Cosmetic repair of scratches and gouges on body panels, hoods, decks and doors.

• Sands easily without loading sandpaper

• No bull’s-eyes, read-throughs or halos

FUSOR TRUCK PLASTIC BANDING ADHESIVE

Installation of hood panels, roof panels, fenders, fender liners, fairings, spoilers, wind deflectors, cab extenders, ground effects, headlamp buckets and other body panels.

• Easy to apply, non-sag formula

• Substantially stronger than conventional adhesives

FUSOR CLEAR PLASTIC BONDING ADHESIVE

Repair bumper and headlight tabs, bond emblems, body side moldings, plastic backer panels, decorative vents, wheel opening moldings, rear wind deflectors and ground effects.

FUSOR COMPOSITE ADHESIVE

Installation and bonding of small body panels, spoilers, and ground effects.

• One product bonds and finishes all plastic panels

• OEM epoxy formula

• Great for heavy-duty truck repair

• High strength

• Excellent gap-filling properties

FUSOR PLASTIC BONDING ADHESIVE

Installation and bonding of small body panels, spoilers, and ground effects.

• High-strength structural adhesive

• Easy to apply, urethane non-sag formula

LOCTITE® HYBRID PLASTIC ADHESIVE

A 2-part, transparent, cloudy colorless to pale yellow cyanoacrylate/acrylic hybrid universal bonder that provides a fast fixture at room temperature in bond gaps up to 0.2in (5mm)

EVERCOAT MAXIM MULTI-FIX PLASTIC REPAIR

A two component epoxy repair material that provides speed, incredible strength and sandability. This fast setting epoxy simplifies the plastic repair process by eliminating substrate identification and adhesion promoter. Multi-Fix is ideal for fixing tears, nicks and gouges in plastic parts and other quick fix applications.

SEM DUAL MIX MULTI-PLASTIC REPAIR MATERIAL

A two-component epoxy for fast repairs on virtually all plastic bumper covers.

• No adhesion promoter necessary

• Exceptional sanding and feather edge

• Excellent leveling and sag resistance

3M CLEAR UNIVERSAL PLASTIC ADHESIVE

A clear, fast-curing, high-strength epoxy. Will bond a variety of materials including plastics, metal, rubber, and glass.

3M UNIVERSAL ADHESIVE BLACK

Designed to bond metal, glass and plastic substrates to each other and themselves. This two-part, high-viscosity adhesive provides excellent gap filling and works on many substrates.

SEM PLASTIC INSTA-BOND

SEM DUAL MIX

PLASTIC REPAIR MATERIAL

A two-component epoxy based filler for repairing olefin-based plastics and similar rigid and semi-rigid substrates.

A general purpose, acrylic adhesive for bonding trim pieces, emblems, moldings and other small parts.

• Holds torn plastic together during repair

• Provides high strength bonds

• Also for use on vinyl, metal and glass

• Accelerator creates instant bond

ADHESIVES & SEALANTS

SEM WELD-BOND PLASTIC ADHESIVE

A non-sag, two-component, acrylic adhesive system formulated to bond metal surfaces without the use of an external primer.

• Superior impact and peel strength

• Spacer beads for consistent bond line thickness

• Excellent environmental resistance

SEM DUAL-MIX PLASTIC QUICK SET 20

A very fast, two-component, opaque, urethane adhesive designed for bumper tab repair and bonding most small plastic, steel and aluminum parts.

• High strength and sandable

• Bonds almost anything

• Non-sag formula fills gaps

SEM DUAL-MIX PLASTIC QUICK SET 50

A two-component, general purpose, urethane adhesive with a 50 second set time designed for repair and bonding of most plastic, steel, aluminum, glass, SMC and fiberglass parts.

• High strength and sandable

• Bonds almost anything

• Non-sag formula fills gaps

SEM DUAL-MIX PLASTIC QUICK SET 180

A two-component, general purpose, black, urethane adhesive with a three minute working time designed for repairing and bonding most small to medium plastic, steel, aluminum, glass, SMC and fiberglass parts.

• High strength and sandable

• Bonds almost anything

• Non-sag formula fills gaps

3M SMC/FIBER REPAIR ADHESIVES

Used to bond backup strips and patches to rigid plastics, such as Sheet Molded Compound (SMC), Fiber Reinforced Polyester (FRP) i.e. Fiberglass.

Part#

MMM08243

MMM08270

MMM08271

MMM08227

MMM08272

MMM08219

MMM08273

MMM08274

Desc.

Adhesive-1

Adhesive-1

Adhesive-3

Adhesive-4

Adhesive-10

Adhesive-35

Adhesive-35

Adhesive-90

3M EZ SAND RIGID PARTS REPAIR

A two-part epoxy used to repair Sheet Molded Compound (SMC), Fiberglass Reinforced Polyester (FRP), and other rigid composite plastic parts.

• Rigid two-part epoxy

• 400 ml dual-syringe cartridge system

• Metered static mixing

3M FIBERGLASS MAT ADHESIVE

A low viscosity, two part urethane used to saturate fiberglass cloth or mat when performing backside reinforcement repairs on Sheet Molded Compound (SMC), Fiber Reinforced Polyester (FRP) i.e. and Fiberglass.

3M QUICK FIX PLASTIC ADHESIVE

This cyanoacrylate adhesive is the perfect answer when you need a quick repair with secure holding power. Excels at bonding rubber weatherstripping, vinyl, metal, glass, side moldings, emblems, trim pieces and most plastics.

1 oz.

3M QUICK FIX PLASTIC ADHESIVE

• Super strong adhesion in seconds

• Bonds plastics, metals, glass and other impervious surfaces

• Resists temperature swings, shocks and cleaning agents

3M FAST PLASTIC & EMBLEM CLEAR ADHESIVE

Bonds fully cured automotive paints and plastic for interior and exterior applications. Quick-acting adhesive sets in about 15 minutes and fully cures in 24 hours

MMM08061 5 oz. tube

3M STRIP-CALK

Fill voids between panels and as a sealant around items such as wire harnesses, hoses, tail lamps or other hardware that passes through body panels and must be sealed from the environment.

MMM08578 Box of 60, 1’ Length

ADHESIVES & SEALANTS

3M WINDO-WELDTM SUPER FAST URETHANE

Formulated for convenience, this medium viscosity adhesive is a single-component, moisture-curing product that requires no mixing, which is an advantage because many windshield replacements are done at the customer’s location away from the shop.

MMM08609 10 oz.

3M FAST CURE AUTO GLASS URETHANE

This adhesive offers high viscosity for accurate placement and high bond strength to meet a variety of application strength requirements. This urethane adhesive is ideal for those applications that require a fast cure and strong hold, such as windshield bonding.

MMM08690

3M SINGLE STEP PRIMER

Designed specifically to promote the adhesion of urethane adhesive/sealants to windshields and other automotive glass applications. This one-part primer is ideal for touching up minor pinchweld scratches and can be used to prime encapsulated glass. It is also suitable as a blackout primer to help protect against UV rays.

MMM08681

3M AUTO GLASS URETHANE WINDSHIELD ADHESIVE

This adhesive is formulated to be fastcuring and non-sagging for rapid results and a clean and simple application process. The features of this windshield adhesive produce high-strength material designed to bond and seal vehicle windshields, backlights and sidelights.

MMM08693 10.5 oz.

3M WIND-WELD ROUND RIBBON SEALER

This ribbon sealer is constructed with a unique feature of controlled compressibility which allows for easy installation and will not squeeze out or allow light to contact pinchweld. This roll of sealer comes with enough material to replace one windshield or backlite.

Part# Size

MMM08610

MMM08611

MMM08612 1/4” x 15’ 5/16” x 15’ 3/8” x 15’

3M URETHANE PRIMER DAUBERS

Built for the smooth and uncontaminated application of urethane primers. The wool applicator won’t leave fibers or dyes that can contaminate the primer and compromise its effectiveness. The thin metal handle provides the right blend of durability and flexibility for even application.

3M WEATHERSTRIP ADHESIVE

Designed specifically to bond rubber gaskets and weatherstripping to metal surfaces. This flexible, highstrength adhesive helps ensure a tight waterproof seal on car doors, trunks, sunroofs and more. It cures fast and works right out of the tube, holding rubber weatherstripping in place and resisting heat, vibration, oils and detergents.

3M SPRAY TRIM ADHESIVE

Designed for attaching lightweight trim materials such as upholstery cloth, trunk liners and for assisting with positioning applications where mechanical fixturing will be holding the material in place.

3M GENERAL TRIM ADHESIVE

A sprayable, synthetic elastomer contact adhesive used for bonding many forms of automotive trim.

3M SUPER TRIM ADHESIVE

3M PRESS-IN-PLACE

EMBLEM ADHESIVE

Offers a simple no-fuss, no-mess way to attach automotive emblems. The transfer adhesive works by simply pressing emblem onto the adhesive strip and then placing emblem on vehicle.

Securely attaches lightweight trim materials such as upholstery cloth and trunk liners to a variety of surfaces. This adhesive is recommended for positioning applications where mechanical fasteners will be added later.

3M PANEL BONDING ADHESIVES

ADHESIVES & SEALANTS

Two-part epoxy adhesive for bonding replacement body panels. From its fast, convenient cartridge system the adhesive seals and bonds steel, aluminum, SMC, and FRP securely in a single operation. This adhesive bonds and seals plastic and metal substrates including cold roll steel, aluminum, SMC, and FRP (traditional fiberglass).

FUSOR METAL BONDING ADHESIVE

Panel bonding, weld and rivet bonding of quarter panels, rear body panels, roof panels, door skins, van side panels and outer truck bed panels.

3M CHANNEL BONDING AND SIDELITE ADHESIVE

Securely bonds glass in both stationary and movable applications on automobiles.

FUSOR PANEL BONDING ADHESIVE

3M IMPACT RESISTANT STRUCTURAL ADHESIVES

Formulated for true automotive OEM specified structural bonding applications, excellent for collision absorption in steel structures and advanced lightweight aluminum alloys.

Metal and plastic panel bonding, weld and rivet bonding of quarter panels, rear body panels, roof panels, door skins, van side panels and outer truck bed panels.

• Paint and sand with no need to remove adhesive squeeze out

• Low odor

• Excellent corrosion protection

FUSOR CRASH DURABLE STRUCTURAL ADHESIVE

Metal and plastic panel bonding, weld and rivet bonding of replacement structural and non-structural auto body panels.

• High impact strength performance

• Excellent corrosion protection

• Weld immediately

SEM DUAL-MIX STRUCTURAL

IMPACT RESISTANT ADHESIVE

An OEM recommended, two-component, epoxy-based adhesive for bonding structural and non-structural components where specified by the vehicle manufacturer.

• Superior impact and peel strength

• Excellent corrosion resistance

• 60 minute working time

SEM DUAL-MIX MULTI-PURPOSE

PANEL ADHESIVE

A two-component epoxy for panel bonding of steel, aluminum, SMC and fiberglass.

• Long working time

• Exceptional impact and peel strength

• Excellent corrosion resistance

SEM DOOR SKIN & SMC ADHESIVE

A two-component epoxy that quickly bonds any combination of steel, aluminum, fiberglass, and SMC.

• Non-sag formulation

• Excellent corrosion protection

• Bonds multiple substrates

SEM DUAL MIX PANEL VIBRATION CONTROL MATERIAL

A two-component, epoxy and urethane blend for reducing noise and vibration on roof skins and intrusion beams.

• OEM recommended

• Excellent sag resistance

• Reduces noise and vibration

• Protects against corrosion

3M FLEXIBLE FOAM

Generally used in automotive body repair when replacing flexible foam located inside body structures such as, to areas including door intrusion beam, roof bows, body side panels and other auto body closed cavities requiring flexible foam for NVH reduction.

• Designed for professional aftermarket collision repair use

• Replaces OEM Flexible Foam

• Remains Flexible After Full Cure

ADHESIVES & SEALANTS

3M NVH DAMPENING MATERIAL

Generally used between automotive body panel skins and inner structure members such as, door skin/intrusion beam. May also be used as a sealant when weld sealing is desired using STRSW equipment.

FUSOR SOUND DAMPENING MATERIAL

Sound dampening and sealing of: roof bows and roof skin, door skin and intrusion beam, quarter panel and inner structure, hoods and deck lids to inner structure. Ideal for overhead and vertical applications where a non-sag material is required.

FUSOR FLEXIBLE FOAM

Sound dampening, sealing and filling of door skins to crash bar, hood panel to supports, trunk panel to supports and gas tank filler area.

• Retains its memory with no shrinkage

• Expands to 10 times its size

• Will not absorb moisture or cause corrosion

3M PILLAR FOAM

Generally used in automotive body repair when replacing rigid foam located inside body structures such as, door pillars and body side or rear panel structures and closed cavities requiring rigid foam for NVH reduction.

FUSOR RIGID FOAM

Sound dampening, vibration dampening, reinforcement, sealing and filling of fender rails, pillars, rocker panels, quarter panels and floors.

• Expands to 10 times its size

• Provides NVH properties for a quieter ride

• Tough compressive strength for maximum energy absorption

• Super fast application, providing full foam expansion in 4 minutes

SEM DUAL-MIX FLEXIBLE URETHANE FOAM

A two-component, urethane, expanding foam that stops vibration and dampens sound in most voids.

• Excellent sound dampening qualities

• Stops panel flutter

• 10x volume expansion

SEM DUAL-MIX RIGID URETHANE FOAM

A two-component, urethane, expanding foam for filling pillars, posts, and box sections.

• Meets UL 94HB flammability tests

• 20x volume expansion

• Restores crash parts to OEM condition

TEROSON MS222 ANTI FLUTTER SEALANT

• Doesn’t contain solvents, isocyanates, silicones or PVC

• Thixotropic for ease of application

• Odorless

TEROSON® MS9120 SF HEAVY BODIED SEAM SEALER

• Doesn’t contain solvents, isocyanates, silicones or PVC

• Ideal gap filling material

• Excellent UV resistance and weathering performance

• Spot-weldable before cure

• Suitable for most paint systems

TEROSON MS9320 SF

SEAM SEALER

• Skin-formation time: 10-20 min.

• Doesn’t contain isocyanates, silicones or PVC

• Good resistance to UV, aging and weathering

• Spot-weldable before cure

• Very fast curing

• Sprayable and brushable

TEROSON LARGE WARMING BOX

A heating device for up to 6 aluminum and plastic cartridges or 6 foil packs.

TEROSON FLEXIBLE WAND KIT

For applying materials around complex body parts or hard-to-reach areas.

TEROSON FLEXIBLE WAND INSERT

Inner hose for application around complex and hard-toreach areas. 10 insert per bag.

TEROSON CARTRIDGE OPENER

ADHESIVES & SEALANTS

Made for opening 310 mL cartridges. LOC199830

TEROSON DOOR SKIN NOZZLE

Especially developed nozzle to guide sealing beads, e.g. for door sealing applications. Cut to shape.

LOC2399541

TEROSON SPRAYABLE NOZZLES

Spray nozzle for use with 300 ml cartridge spray gun (LOC142241). The pack contains 12 spray nozzles. LOC547882

TEROSON T2 FLAT NOZZLE

Wide flat bead, double-sided. 1 side includes rib to match various OEM styles. Cut to shape. LOC2399908

TEROSON FLATSTREAM NOZZLE

Nozzle especially designed for application of original OEM flat-stream textured beads to car bodies. Ideal for seam sealing applications.

TEROSON WIDESTREAM NOZZLE

Dispensing nozzle, PowerLine II, seam sealing and acoustic applications, OEM texture. LOC1470999

TEROSON DOOR EDGE NOZZLE

Standard nozzle for use on aluminum cartridges and for standard sealing beads. Pack contains 10 standard nozzles.

TEROSON POWERLINE II PISTOL

A high-pressure dispensing tool with a piston rod for flat-stream and wide-stream nozzle applications. It has an ergonomically designed hand grip and an integrated pressure gauge for optimal control of dispense rate with a 3:1 working/input pressure ratio. This means that all 310ml cartridges can be processed without problems – even in unfavorable conditions, e.g., cold nozzle cartridges. The piston rod ensures smooth action and accurate and efficient liquid handling, from low to very high-viscosity pastes.

TEROSON MULTI PRESS PISTOL

An air-pressure gun for dispensing low- to mediumviscous sealants and adhesives. It’s ideal for bead, spray seam and spray coating (UBC) applications. Due to its small and compact design and telescopic piston rod, it’s easy to use at close quarters.

3M PERFORMANCE PNEUMATIC APPLICATOR

Designed for dispensing 3M 2-part adhesives and sealers from 200 mL and 400 mL cartridges. This pneumatic applicator gun is ideal for large volume jobs.

3M FLEXIBLE PACKAGE APPLICATOR GUN

Is used to accurately dispense materials during the repair of interior and exterior seams and joints. It provides steady application of 3M Windshield Urethanes, Urethane and MSP Seam Sealers from 310 mL packages at a 12:1 ratio.

3M PROFESSIONAL CAULKING GUN

A high-performance rod-driven applicator gun for dispensing single-component 3M caulks, sealants and adhesives in collision repair. Its cast steel construction holds up under challenging conditions, and its friction feed operation helps ensure smooth beads and professional results. Added features include a hanging hook and thumb-activated pressure release.

3M NO CLEAN UP APPLICATOR GUN

A high-performance applicator gun designed for use with 3M™ No Cleanup products (sold separately). This unique siphon-feed applicator gun offers a convenient and inexpensive means for spraying low-viscosity solutions contained within the Cleanup cans.

3M AIR-POWERED APPLICATOR GUN

Designed to spray hard to reach areas and provides deep entry of protective wax into cavities. Our Airpowered Applicator Gun is available with air line (70cm) and nozzle, and works with 1L cans of 3M™ Inner Cavity Wax.

SEM UNIVERSAL DUAL-MIX APPLICATOR GUN

ADHESIVES & SEALANTS

An applicator for dispensing 7 oz. two-component cartridges.

• Ensures proper mix ratio

• Ideal gear ratio for smooth dispersion

• Release button for precision

3M MANUAL GUN FOR 2 PART CARTRIDGES

A high-performance two-part applicator gun that dispenses 1-1 and 2-1 200 mL duo-pack cartridges.

FUSOR HIGH PERFORMANCE MANUAL DISPENSING APPLICATOR

For use with 7.1 oz (210 mL) cartridges.

• Dispenses 1:1 and 2:1 cartridges

• 26:1 thrust ratio allows for easy dispensing of high viscosity adhesive

• Simplistic design allows for easy cartridge insertion and ejection

• Composite support provides excellent cartridge stability

FUSOR HIGH PERFORMANCE PNEUMATIC APPLICATOR

For use 7.1 oz (210 mL) cartridges.

FUSOR MANUAL DISPENSING APPLICATOR

For use with 1.7 oz (50 mL) cartridges.

• Dispenses both 1:1 and 2:1 cartridges with no conversion necessary

• Sturdy, high-quality, compact

• Dispenses 1:1 and 2:1 cartridges

• One finger forward and reverse operation

• Composite support provides excellent cartridge stability

• For fast and easy application of long beads

3M PERFORMANCE MANUAL APPLICATOR

Designed for use with 3M cartridges as small as 37.5 mL, these applicators dispense correctly mixed two-part bonding agents with no measuring – maximum efficiency on individual repair orders or where very little space or equipment is available.

Replacement Plunger FUS10120

FUS90987

Part#

FUS90988

Part#

3M OEM SPRAYABLE AIR SUPPLY KIT

• Kit turns any pneumatic applicator into a sprayable applicator

• Can be used to spray many beads or textures

• Kit is sold without coupler or air fitting

• Shop installs based on the style they use

• Standard 1⁄4” NPT male air coupler

• Standard 1⁄4” NPT male air fitting

• Initial application for brushed beads

• Operate “similar” to how a paint gun operates

• Valve on Air Supply Kit controls fan pattern

• Applicator regulator control fluid delivery

3M OEM MATCH WIDE STREAM TIPS

Commonly used for:

• Wide bead applications

• Self leveling material

• Base application for spray beading

• Initial application for brushed beads

3M OEM MATCH RIPPLE TIPS

Most common areas of use are rear floor, rear body panel, front and rear frame rails, lower 1⁄4 extension, wheel wells, strut tower, passenger floor panel, and rocker panel pinch weld.

3M OEM MATCH SPRAYABLE TIPS

Commonly used for:

• Spray beads

• Liquid applied sound dampening

• Spray texture fine

• Spray texture coarse

3M OEM MATCH WING NOZZLE TIPS

Commonly used for:

• Hemmed flanges

• Narrow and smooth beads

• Narrow roof ditch channels

FUSOR RED POWER

MIXING TIPS

ADHESIVES & SEALANTS

Use with all 1:1 and 2:1, 50 mL Cartridges

Use with all 1:1 and 2:1, 210 mL Cartridges 12 12

FUSOR 412 NOZZLE

For use with Fusor 800DTM, 801DTM and 803 DTM sealers.

3M 200

mL

MIXING NOZZLES

A cascade mix/meter nozzle for an easy squeeze of adhesive right on target. This static mixing nozzle is engineered for use with 3M cartridges and manual or pneumatic applicators.

SEM DOORSKIN NOZZLE

Specialty flanged tip that quickly duplicates the appearance of door skin seam sealer beads.

• Flanged tip for straight beads

• Eliminates masking and tooling

• Duplicates OEM appearance on most door skins Part# Per Pack

6

SEM INTEGRAL NUT SQUARE STATIC MIXERS

Mixing tips for use with 7 and 10 oz. twocomponent cartridge products. Easy trim tip for different bead size

SEM VERSA-TIP

Are customizable tips, graduated and notched for easy trimming to duplicate 0.5”, 0.75”, 1”, 1.25” and 1.5” flat, ribbon beads out of 7 oz., two-component cartridges.

3M STATIC MIXING NOZZLE

A cascade mix/meter nozzle for an easy squeeze of adhesive right on target. Designed for use with 3M’s 1:1 50 mL and 2:1 mL cartridges.

SEM PLASTIC REPAIR REINFORCING TAPE

A non-backed mesh tape to strengthen repairs on plastic and fiberglass.

• Light adhesive for easy application

• Ideal width for tears

• Use with all fillers

3M EZ FIX FLEXIBLE PATCH

Popular repair material for automotive bumpers, reinforces the inside of a twosided plastic repair where the damage has penetrated through the plastic material. The flexible patch measures 4 inches by 8 inches and provides a strong backside reinforcement repair for most plastics.

3M REINFORCEMENT PATCH

Ideal for backside reinforcement of flexible auto components during collision repair. Strong structural gauze is very absorbent for excellent saturation, great for smooth, efficient repair especially when using materials with fast working times. Thin construction limits bulging even in layered applications.

FUSOR REFRESHING MESH

Use for backing patches, bumper tabs and other reinforcements on plastic bumper covers.

3M PLASTIC CONTOURING SHEET

Used with plastic repairing adhesives, this sheet provides a smooth and flexible surface that can be coated with adhesive and pressed against any damaged part.

FUSOR FIBERGLASS CLOTH

Use for structural backing support, pyramid patches and other reinforcements on SMC and fiberglass panels.

PREPS

E-Z MIX MOULD PREP

For removing double-sided tape from vehicle mouldings.

• Use solution over and over

• Get more production from employees

• Safe to use on chrome inserted mouldings

• Will not damage painted mouldings

• NO VOLATILE SOLVENTS - will not evaporate

U-POL® SOLVENT BASED DEGREASER

An anti-silicone degreaser that removes contaminants including wax, grease and silicones.

• Fast evaporating and ideal for localized repairs

• Formulated to avoid attack on existing paint lines

• Can be use on bare metal and existing paint surfaces

SEM SOAP

Mild abrasive cleaner used as the first step in refinishing flexible substrates

• Gravitates into surface and floats contaminants for easy removal

• Mild abrasive helps with adhesion

• Foaming action removes body oils and other water soluble contaminants

SEM SOLVE

A virgin solvent blend to clean panels prior to refinish or repair. Effectively removes adhesive residue, wax, grease, road tar, oil, silicone, paint overspray and bug remnants.

SEM VINYL PREP

A strong solvent blend critical to refinishing vinyl.

• Removes soil, wax and grease

• Temporarily softens substrate

• Promotes adhesion of top coat

• Works quickly

SEM PLASTIC & LEATHER PREP

A mild solvent blend to clean plastic and leather prior to refinishing.

• Removes mold release, fingerprints, grease and oil

• Promotes adhesion of topcoat

• Will not soften or distort plastic parts

3M GENERAL PURPOSE

ADHESIVE CLEANER

General Purpose Adhesive Cleaner is an excellent surface cleaner for the removal of adhesive, tar, grease, oil, and paint overspray on metal and painted surfaces. It may also be used on most plastics and some fabrics for spot cleaning of the above fore mentioned contaminates.

3M POLYOLEFIN ADHESION PROMOTER

Formulated adhesion promoter for use when repairing low surface energy plastics such as thermopolyolefin (TPO). Use the adhesion promoter with 3M brand adhesives. Designed specifically for polyolefin and ethylene propylene plastic identified by the marks PP, EP, TPO or EPDM on the back of the part.

MMM05907 4” x 8”, pack of 6

SEM SAND FREE ADHESION PROMOTER

A unique wet-on-wet adhesion promoter for ABS, PVC, and similar plastics.

• Wet-on-wet application melts color into substrate

• Perfect for interior plastic parts

16 oz. aerosol Cone top quart

SEM XXX ADHESION PROMOTER

Increases adhesion of top coat materials to a wide variety of raw plastics.

• Superior bonding properties

• Top coat with most refinish products

• Excellent on olefin based plastics

16 oz. aerosol

PREPS

DUPLI-COLOR® ADHESION PROMOTER

Improves adhesion of enamel and lacquer top coats to all surfaces, including plastic and chrome. An all-purpose clear primer ideal for both interior and exterior applications.

FUSOR SURFACE MODIFIER

Increases adhesion for plastic bumper repair and painting plastic parts. Also improves adhesion for double-sided tape.

• Open time from 10 minutes to 24 hours

• No need for plastic identification when used with Fusor 132/133, 142/143, 152/153 or 141/140 adhesives

PPG ONECHOICE® PLASTIC PREP SYSTEM

Designed to simplify the plastic refinish preparation process and deliver superior adhesion to all common automotive plastic substrates.

PPG ONECHOICE COMPLIANT ADHESION PROMOTER

Deliver exceptional adhesion to bare, unprimed automotive bumpers, fascias, and other automotive plastics.

U-POL UNIVERSAL ADHESION PROMOTER

Promotes paint adhesion to most automotive surfaces, like plastics, aluminum, galvanized metal, zinc, painted surfaces, fiberglass and even body fillers. Replaces the need to abrade surfaces in hard-to-sand areas, like under hoods and deck lids.

KLEAN-STRIP GOOF-OFF OVERSPRAY REMOVER

For use on fully-cured OEM surfaces and hard non-porous surfaces. Works the first time quickly and easily removing tough stains like asphalt and overspray.

KLEAN-STRIP® BULLDOG ADHESION PROMOTER

Premier adhesion promoter for the auto body collision repair market. A single-component product that combines an adhesion promoter and a flex agent in one. It is fast drying and provides superior adhesion on all flexible and rigid plastic parts.

PPG ONECHOICE

SANDING PASTE

Designed to assist the refinish technician to thoroughly and quickly prepare painted automotive surfaces for re-painting or blending.

• Packaged ready for use

• Fast abrasion, cutting action

• Approximately 1000 - 1200 grit scratch

• Works well for refinishing or blending

3M SCUFF-ITTM PAINT PREP GEL

• Unique formula swiftly preps panels, jambs and bumpers

• Blends areas and feathers primer and paint

• Produces uniform scratch patterns to improve paint adhesion

SEM SCUFF & CLEAN

An abrasive paste that cleans and prepares panels for repair or refinish.

• Perfect for bumper covers

• Removes waterborne contaminants and road grime

• Uniform scratch improves top coat adhesion

• Rinses clean without residue

KLEAN-STRIP BULLDOG ABRASIVE PREP & CLEAN

An advanced emulsion, combining water and solvent technologies. Removes wax and grease from the surface, and is the only paste that effectively removes the mold release agents that can cause fisheyes and peeling. Its unique abrasive formula increases the surface area of the component, improving basecoat adhesion.

PPGSX1002/1P 16 oz. tube

KLNEPC535 7.6 lbs.

PREPS

PPG ONECHOICE TACK RAGS

• Low tack for use between coats

• Wax and silicone free

• Not toxic, anti-static

BOND CORP® CRYSTAL® TACK CLOTHS

• No VOC’s

• Non-toxic

• Exclusive “thermoset” process ensures a high quality tack cloth & finish that lasts

• Will not dry out or harden

• Solvent, silicon and wax free

GERSON® BLEND PREP TACK CLOTH

• Dry Tack

• Synthetic hydro-entangled fibers are locked together for durable, tear resistant and lint-free fabric

• Apertured to pick up and trap all particulates

• Completely removes surface particulates without leaving harmful residues

• Designed for waterborne, compatible with all paints

TORK® LOW LINT CLEANING CLOTH, TOP PACK

Meets your cleaning needs due to suitability with most solvents, disinfectants, and detergents. Perfect for working with sensitive surfaces due to antistatic and extremely low-lint properties.

BOND CORP CRYSTAL GOLD STANDARD TACK CLOTH

A proprietary formula that is made with natural colored resins that produce a unique quality of tack specifically made for automotive care.

WYPALL® L40 ALL-PURPOSE

WIPERS, POP-UP BOX

Ideal for routine industrial cleaning and maintenance. Removes soils and liquids from face and hands. One-at-atime dispensing for users on the go.

WYPALL MULTI-TASK CLEANING CLOTHS

These multi-task cleaning cloths are absorbent and reinforced for cleaning performance. Rag replacement that absorbs water faster than rags. These general purpose cleaning cloths are great to remove sticky substances and residue.

SCOTT® MULTI-FOLD TOWELS

Designed to reduce waste and provide excellent hand drying with exclusive absorbency pockets.

TORK UNIVERSAL WIPER 330

WYPALL L40 ALL-PURPOSE WIPERS

Made of bonded cellulose using DRC (double re-creped) technology for strength, softness and absorbency. These utility wipes are specially designed to absorb liquids, lubricants and oils, yet they’re soft enough for use on face and hands.

Multipurpose cloth, handy for a wide range of tasks to limit the number of different cloths needed. Particularly good for cleaning glass and does not leave any lint or streaks on surfaces.

PRO-SERIES® SUPER RAG® SPUNLACE TOWELS

Heavy grade Spunlace towels handle tough cleaning tasks with exceptional durability. They are reusable, strong wet or dry, extremely absorbent, wipe surfaces completely dry and are virtually lint-free.

KIM05120

SPECIALTY COATING

SHIELD® SPRAY IN BEDLINERS KITS

Formulated with the highest quality aerospace-grade resins to provide superior performance and enhanced gloss, and is infused with Kevlar pulp for unmatched strength and durability!

• Flash time between coats is just 20 minutes at 70º Fahrenheit, and is ready for heavy duty use in just 48 hours

• Has an extremely dense crosslink for an average Shore D hardness that has been independently lab tested and shown to be 65% harder on average

E SHIELD ECONOMY SPRAY IN BEDLINER KITS

Superior UV protection, great solvent & scratch resistance with exceptional adhesion

• 1 gallon of sprayable product

• (4) 24 oz bottles of bedliner

• (1) 32 oz can of hardener

• 1 kit covers approximately 125 sq. ft.

SHIELD BEDLINER SPRAY GUNS

BEDLINER KITS

BEDLINER KITS

U-POL 1 GALLON RAPTOR KITS

The 1 Gallon Raptor Kit is the industry standard in bedliner coating. Each kit contains four bottles of Raptor and one tin of hardener. Each kit covers approximately 125 square feet, enough to do a full size pick-up truck bed. Compatible with both Raptor Schutz and Professional Vari-Nozzle application guns.

RAPTOR TRACTION SLIP RESISTANT

ADDITIVE 2K BEDLINER

RAPTOR TRACTION slip resistant additive can be added directly into RAPTOR Tough and Tintable Protective Coating bottles prior to spraying. RAPTOR TRACTION is packaged in a convenient 200g resealable bag and will fill one bottle of RAPTOR for a typical slip-resistant application.

RAPTOR® 2K BEDLINER

The convenient RAPTOR 2K Bedliner Aerosol offers a fast, easy way to apply RAPTOR without compromising performance, no spray equipment necessary. Ideal for spot repairs and small jobs. More than just a bed liner, RAPTOR is a highly durable and tough protective coating. Use RAPTOR on a variety of surfaces that need a protective barrier that withstands the toughest situations.

UPOUP4883

UPOUP4884

UPOUP4885

UPOUP4886

UPOUP4887

UPOUP4888

UPOUP4889

SPECIALTY COATING

RAPTOR PROFESSIONAL VARI-NOZZLE APPLICATION GUN

Delivers a professional, consistent finish, allowing for wide texture range and better application control. Adjustable spray nozzle lets you dial-in the desired finish and texture. Professional grade aluminum body is lightweight and has a hanger hook for easy storage or change over. Part#

PPS 2.0 Gun Adapter MMM26015

RAPTOR STANDARD APPLICATION GUN

Specially constructed with European threading and longer dip tube to fit RAPTOR and GRAVITEX PLUS bottles. Screw directly onto the plastic bottle.

SEM GLADIATORTM XC COATING BEDLINER SPRAY LINER KIT

High quality, 2K urethane, texture coating that provides a durable, chemical and fade resistant protective coating for truck beds, recreational vehicles, industrial equipment, restoration and more. Kits include 4 short-filled quarts of product, 1 pint of activator, 1 Economy Coating Gun, 1 mixing cup.

RAPTOR ADHESION PROMOTER

Promotes paint adhesion to most automotive surfaces, like plastics, aluminum, galvanized metal, zinc, painted surfaces, fiberglass and even body fillers. Replaces the need to abrade surfaces in hard-to-sand areas, like under hoods and deck lids.

Part# Description UPOUP5024 12.4 oz. aerosol Color Clear

RAPTOR ACID ETCH PRIMER

Phosphoric acid ester formula promotes paint adhesion to difficult substrates, like galvanized steel and aluminum Ideal for rub throughs in primer prior to application of color and new bare metal panels.

Part# Description

PPS 2.0 Gun Adapter MMM26022

13.2 oz. aerosol Color Gray

EVERCOAT MAXIMTM MULTI-PURPOSE REPAIR PANELS

Developed to specifically to provide solutions to many challenging applications and uses. These repair panels can be used in a variety of applications that range from sound dampening materials to the automotive plastic repair process. Meets OEM specifications for GM, Ford, Daimler Chrysler, Mitsubishi, Toyota, Nissan and Honda.

EVERCOAT Q-PADS

Restores vehicles to OEM specifications to provide original quiet ride. Self-adhering, sound deadening panels designed to reduce noise levels in cars and trucks. Cuts easily with a razor blade, knife or scissors. Can be heated up to 300 degrees F to conform to any irregular surface. Permanent bonding once affixed.

POLYVANCE UV FAST PATCH

This self-adhesive patch cures quickly when exposed to UV light, forming a rock-hard, tough, fiber-reinforced patch that will create a long-lasting, temporary, or even permanent, repair. Will stick to virtually any rigid substrate, plastic, metal, wood, ceramic, or fiberglass.

TRANSTAR® TEXTURED CLEAR COATING

• A rapid drying, flexible protective coating

• Used over fully cured clearcoats for added chip resistance

• High gloss, non-yellowing formulation

• Allows for variable texture patterns

• Can be applied over basecoat and clearcoat

SPECIALTY COATING

TRANSTAR TEX COAT CHIP GUARD

• Tex Coat is a rapid drying, flexible protective coating

• Texture can be varied to match OEM textures as found on rocker panels, valances, etc.

• Paintable in 30-45 minutes

• Highly chip resistant

• Convenient aerosol requires no equipment clean-up

SEM CHIP GUARD

A durable acrylic coating that matches fine to coarse OEM textures and protects lower panels from impact, chipping, and abrasion.

• Protects lower panels from impact, chipping, and abrasion

• Duplicate a wide variety of factory textures

• Available in aerosol and ready to spray quarts

• Full texture spectrum from fine to coarse

SEM TEXTURE COATING

A unique blend of flexible materials for restoring the textured finish on bumpers, dashes, fiberglass tops and other plastic parts prior to painting.

• Top coat with most refinish materials

• Duplicates original textures

• Ready to spray

• Quick drying

SEM 2K URETHANE CHIP GUARD KIT

Job-sized, two-component, shake-and-shoot, textured coating for reproducing a variety of OE textures and chip guards. Two-component system helps eliminate common problems seen with one-component products such as long flash times, pinholes, solvent trap, delamination and solubility. Includes 8 oz chip guard and 4 oz activator.

SCOTCHGARD PAINT PROTECTION FILM PRO SERIES

Delivers superior protection to automotive surfaces against scratches, chips and weathering. Features a self-healing formula that enables minor scratches to disappear by themselves and helps preserve a car’s showroom quality finish for years.

3M BODY PROTECTION POUCH

Resilient under-the-paint protective coating designed to help protect many areas of automobiles. Speciallyengineered formulas that match a wide variety of textures on factory-applied coatings for top results.

NORTON ABRASIVES ROCKER PANEL TEXTURE COAT GRAY

• A textured, durable coating to protect against stone chips, salt, damp and rust

• Includes two nozzles to recreate a variety of OEM textures

• High build formulation covers seams and weld areas

3M ROCKER PANEL COATING

Resilient coating designed to protect vehicle surfaces where they are vulnerable, on rocker panels, and other lower auto body panels and parts exposed to impact from gravel and stones. Formulated to match coarser OEM textures, this coating forms an extra layer over primer and under paint. The light gray coating is compatible with many common automotive paints.

SPECIALTY COATING

3M NO CLEAN UP ROCKER GARDTM

Has a unique delivery system that eliminates spray gun clean up, reducing solvent usage and the time required for cleaning operations. The coating is formulated to provide chip and abrasion resistance to lower body panels, matching the OEM coating that must be replaced during the collision repair process. This coating has a medium to coarse texture which varies based on application technique. Part#

MMM08949 22 oz.

3M NO CLEAN UP HIGH COVERAGE BODY SCHUTZTM COATING

A solvent-based rubberized coating designed to provide corrosion protection of bare or primer coated sheet metal and a smooth to medium textured appearance with satin black color.

MMM08964 22 oz.

3M UNDERCOATING

A multi-purpose, non-paintable aerosol coating designed for application to undercarriages, wheel wells, frame rails, fenders, and other automotive and transportation related parts. Does not contain UV screeners and is designed for indirect sunlight exposure.

MMM08881 16 oz. aerosol

3M RUBBERIZED UNDERCOATING

Helps protect the undercarriage of cars, trucks, vans and recreational vehicles from both corrosion and abrasion. The coating may also be used to protect wheel wells, quarter panels, interior side of fenders, door skins, under side of the hood and trunk lid, floor pans, and more. The rubberized undercoating also helps deaden noise, allowing for a more pleasant and quieter ride.

19.7 oz. aerosol

3M BODY SCHUTZ RUBBERIZED COATING BLACK

Works as a protective coating with sound deadening qualities designed for cars, trucks and vans. The black, rubberized, coating bonds to a wide variety of surfaces. Best applied with 3M Body Schutz Applicator Gun.

Part# Size

MMM08864 1 qt. Applicator Gun MMM08997

EVERCOAT LOW VOC RUBBERIZED UNDERCOATING

Provides ultimate protection against abrasion and stone chips. With excellent adhesion properties, the undercoating has a slightly smooth texture and can be painted over in 2 hours without bleed through.

FIB1348 18 oz. aerosol

MMM08883

TRANSTAR RUBBERIZED UNDERCOATING

Quick Dry Rubberized Undercoat is a rapid-drying highly protective automotive coating for autobody interiors, underhood and underbody applications. Resists abrasion and inhibits rust as it seals out dust and moisture. Deadens sound. Excellent adhesion to painted and unpainted surfaces.

AUTO BODY MASTER RUBBERIZED UNDERCOATING

An asphaltic, non-paintable, rubber and wax coating which contains no asbestos fiber and is fast drying. Perfect for undercarriage protection, sound deadening, and wheel well coating. Helps prevent rust. Very flexible and will not crack or peel.

HI-TECH PAINTABLE RUBBERIZED UNDERCOAT

Rust preventative with quick dry adhesion that won’t crack or chip under normal conditions. Helps soundproof cars, excellent on new panel and fender replacements, section repairs, weld joints and rust holes.

3M CAVITY WAX PLUS

A non-hardening, self-healing corrosion protection coating for internal auto body panels and structural enclosures, as well as new replacement parts. It is designed to cover and seal internal joints, hem flanges and other areas where OEM e-coat may be compromised.

3M CAVITY WAX PLUS WAND KIT

Allows body shop technicians to apply 3M Cavity Wax Plus in hard-to-reach places such as internal door skins and frame rails. The kit includes 24” and 34” wands with built-in 360-degree spray nozzles, and an 8” wand for flooding seams.

SPECIALTY COATING

LIKE90® CORROSION PROTECTION PRODUCTS

Corrosion Inhibiting Compounds (CICs) provide a superior way to restore corrosion protection during a repair process. Thin-film CICs penetrate into crevices and seams where traditional coatings can’t go. And they contain no metals like zinc or copper that promote galvanic corrosion between dissimilar metals.

L9010010

L9010011

L9010012

L9010025

L9010014

CIC Kit - 10 oz. aerosol - Contains all 4 products

CIC Weld-Thru - 10 oz. aerosol

CIC Dry Film - 10 oz. aerosol

CIC Wet Back - 10 oz. aerosol

CIC Remover - 10 oz. aerosol

PERMATEX® RUST TREATMENT

Provides one-step treatment that encapsulates old rust and prevents new rust. Just brush or spray on. Within minutes, rust is replaced by a durable black polymer coating that may be painted. Excellent protective primer. Specially formulated to be used with body filler and fiberglass.

MAGNET PAINT CHASSIS SAVER RUST PREVENTATIVE PAINT

A high solids VOC compliant single component chassis paint and underbody coating specially formulated to permanently stop automotive and truck corrosion without the use of primers or topcoats.

POR 15 RUST

PREVENTATIVE COATING

High performance coating designed to paint directly on prepped rusted or seasoned metal surfaces to stop rust permanently. Non-porous and seals and protects many surfaces from water, chemicals, salt, and other corrosive contaminants.

EVAPO-RUST® RUST REMOVER

Non-corrosive rust remover dip for restoring rusty treasures. Remove rust to bare metal without sanding or scrubbing. Simple and easy to use, with no need for mixing. The solution comes ready to use. Just soak, rinse, and reuse.

POR 15® METAL PREP

Provides the best adhesion for POR-15 Rust Preventive Coating on any metal surface, including aluminum and shiny polished metal surfaces. The simple process of this pre-paint cleaner for metal gently etches metal, creating an ideal anchor pattern for coatings such as POR-15 Rust Preventive Coating, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel.

SPECIALTY COATING

SEM RUST-MORTTM

An acidic compound that converts existing rust to an insoluble black coating prior to applying body filler, primer or top coat.

• Completely removes light rust

• Converts heavy rust into a stable, workable substrate

• Creates ideal surface for filler or primer

• Easy to use

• Ready to apply

TRANSTAR AMBER RUSTPROOFING

This abrasion resistant coating will flow into hard to reach seams. It is designed for replacement panels or new car rustproofing and restores the repair of existing corrosion protection to original specifications found on the interior of fender and panel replacements.

LIKE90® QUICK CHECKTM COLOR MATCHING

• A faster, more convenient way to match color for a repair

• Simulates the depth and clarity of fresh clear on base

• Dissipates completely without leaving any residue

TRANSTAR 2 IN 1 TRIM BLACK

A tough, flexible polymer coating designed to restore bumpers and flexible or rigid trim to their OEM condition. Excellent adhesion to urethane, rubber, metal and treated olefin plastics. Fast drying, provides excellent adhesion and requires no priming.

DUPLI-COLOR TRIM AND BUMPER PAINT

Featuring Fade-X™ Technology to ensure a long-lasting finish for exterior and interior applications. This specialty formulation restores trim & bumper surfaces back to their factory-look.

SEM TRIM PAINT

An acrylic coating, formulated to restore the OEM finish on automotive trim components. For use on plastic, steel, aluminum, stainless steel, and chrome.

• Excellent adhesion and durability

• No primer required

• Retains flexibility

SEM FLEXIBLE BUMPER COATER

Advanced coatings formulated to restore the OEM finish on automotive bumpers and plastic cladding.

• Mix Ratio: Ready to Spray

• Dry time: 5-10 minutes between coats

SEM BUMPER COATER

A line of advanced coatings formulated to restore the OEM finish on automotive bumpers and plastic cladding.

• No adhesion required

• No primer required

• Excellent adhesion and durability

• Retains flexibility

• Professional results

• 16 oz. aerosol

SEM39073

SEM39083

SEM39153

SEM39163

SEM39173

SEM39183

SEM39193

SEM39253

SEM39263

SEM39273

SEM39283

SEM39293

SPECIALTY COATING

SEM17363

SEM17373

SEM17383

SEM17393

SEM17403

SEM17413

SEM17423

SEM17433

SEM17503

SEM17013

SEM17023

SEM17033

SEM17043

SEM17053

SEM17063

SEM17073

SEM17083

SEM17093

Light Graystone

Dark Slate Gray

Medium

SEM CLASSIC COATTM

OEM matched aerosols for renewing or restoring leather and vinyl.

• Superior adhesion, flexibility and hiding

• Will not crack

• Quick drying

• 16 oz. aerosol

DUPLI-COLOR VINYL AND FABRIC COATING

Perfect for restoring or customizing your interior vinyl seats, dashboards, door panels, shifter boots and consoles. Formulated with a maximum adhesion promoter so there’s no need for primer. Formulated coating won’t crack, peel or chip.

DUCHVP100

DUCHVP102

DUCHVP103

DUCHVP104

DUCHVP105

DUCHVP106 DUCHVP108

Light Cashmere

Medium Cashmere

Very Dark Cashmere

Limo Flat Black

Midnight Black

Light Graphite

Light Parchment

Medium Graphite

Medium Parchment

Medium Prairie Tan

Medium Dark Graphite

Dark Graphite

SEM17173

SEM17183

SEM17203

SEM17213

SEM17223

SEM17243

SEM17263 SEM17293

SEM17313

SEM17323 SEM17353

SEM EZ COATTM

Direct to metal coating that matches the color and gloss of factory primer and e-coat colors.

• OEM recommended

• Duplicates factory appearance

• Direct to steel and aluminum

• Quick curing and hiding

SEM62223 SEM62233

SEM62243

Part#

SEM13003

SEM13013

SEM13023

SEM15003

SEM15013

SEM15023

SEM15033

SEM15043

SEM15053

SEM15063

SEM15083

SEM15093

SEM15103

SEM15113

SEM15123

SEM15143

SEM15163

SEM15173

Color

High Gloss Clear

Satin Gloss Clear

Low Luster Clear

Phantom White

Landau Black

Cordovan Brown

Saddle Tan

Shadow Blue

Granite

Burgundy

Silver

Light Buckskin

Super White

Firethorn Red

Santa Fe

Sandstone

Presidio

Camel

SEM COLOR COATTM

Specialty flexible coating formulated to restore or change the color of most vinyl surfaces, flexible and rigid plastics, carpet and velour. Not a dye, but a fade resistant flexible and permanent coating.

• Refinish vehicle interiors and motorcycle seats

• Enhance automotive carpet and velour

• Superior adhesion, flexibility, and hiding

• Will not crack

• Quick drying and simple to use

Part#

SEM15183

SEM15213

SEM15223

SEM15233

SEM15243

SEM15253

SEM15273

SEM15283

SEM15303

SEM15313

SEM15323

SEM15353

SEM15363

SEM15373

SEM15393

SEM15413

SEM15453

SEM15483

Color

Warm Gray

Bluemist

Castella

Gloss Black

Satin Black

Titanium Metallic

Napa Red

Pescadero Sand

Graphite

White

Palomino

Light Titanium

Portola Red

Flame Red

Medium Gray

Thomas Bus Gray

Gloss White

Bluebird Brown

Part#

SEM15603

SEM15643

SEM15713

SEM15723

SEM15753

SEM15763

SEM15793

SEM15803

SEM15813

SEM15823

SEM15833

SEM15843

SEM15853

SEM15863

SEM15873

SEM15883

SEM15893

Color

Sailcloth White

Pacific Blue

Ladera

Monterey

Light Oak

Storm Gray

Shale

Opel Gray

Med. Dk. Pewter

Light Parchment

Khaki

Med. Parchment

Ivory

Light Neutral

Medium Slate Gray

Medium Neutral

Medium Prairie Tan

HI-TECH TRIM PAINT ALSO AVAILABLE

Premium-quality, high-performance paint designed specifically for the trim and mouldings of vehicles and other high-demand surfaces. Formulated with advanced technology, this paint provides a durable, long-lasting finish that resists chipping, fading, and wear.

Contact your sales representative to find the exact match for your vehicle needs!

PAINT CORRECTION

NORTON FARÉCLA FOAM AND WOOL PADS

Premium buffing pads designed for cutting, polishing, and finishing tasks. The foam pads offer smooth, even polishing, while the wool pads provide aggressive cutting action for removing scratches and imperfections. Ideal for automotive, marine, and industrial applications, these pads deliver fast, professional-grade results on a variety of surfaces, including paint and gel coats.

NOR91319

NOR91320

NOR91321

NOR91310

CCS waffle cutting foam pad - orange

CCS waffle polishing foam pad - black

CCS waffle finishing foam pad - blue

CCS waffle cutting foam pad - white

CCS waffle polishing foam pad - black

CCS waffle finishing foam pad - blue

CCS waffle double sided cutting foam pad - white

CCS waffle double sided cutting foam pad - black

CCS waffle double sided cutting foam pad - blue

Double sided wool pad

Single sided wool pad

Single sided wool pad

NOR91313

Double sided pad adapter

NORTON LIQUID ICE POLISHING SYSTEM

High-performance polishing solution designed for fast and efficient surface finishing. It features a single compound paired with a color-coded pad system to simplify the process, making it easy to remove defects and achieve a deep, glossy finish. Perfect for automotive and industrial applications, this system delivers professional, swirl-free results on paint, clear coats, and gel coats in fewer steps.

MEGUIAR’S DA MICROFIBER FINISHING DISCS

• Microfiber disc technology refines surface to a high gloss finish

• Engineered foam interface for controlled conformability and optimal finishing

• Machine washable

NorGrip back-pad (5/16”-24”)

Super cut wool pad - step 1

Blue cutting foam pad - step 2

While finishing foam pad - step 3

Wool pad - step 1

Blue foam pad - step 2

White foam pad - step 3

MEGUIAR’S

• Microfiber disc technology cuts through moderate surface defects with no swirls

• Engineered foam interface for optimal cutting efficiency, and controlled conformability

• Machine washable

MEGUIAR’S DA MICROFIBER FINISHING DISCS

• For moderate to severe defect removal

• Engineered for increased cutting efficiency Best for flat services

• Best for flat services

PAINT CORRECTION

• Quickly removes oxidation, scratches, swirls, water spots, and other paint defects with ease

• Moves evenly and quickly in open space, yet small enough to get into tight spots

• Engineered to optimize our compound’s ability to remove defects quicker

• Use with your favorite liquid or paste wax to quickly add protection, shine and brilliant reflections in 30 minutes or less

• Moves evenly and quickly in open space, yet small enough to get into tight spots

• Lays a perfect, even application for maximum reflectivity and protection

MEGUIAR’S SOFT BUFF DA BACKING PLATES

• Distributes pressure for smoother finishing

• Precisely tuned outer edges for ideal disc contouring over flat and curved surfaces

• Quick and easy disc changes with micro hook and loop attachment systems

MEGUIAR’S SOFT BUFF FOAM CUTTING DISCS

• Improved foam technology cuts through moderate surface defects with no swirls

• Low profile for optimized performance

• Advanced cutting and finishing results from increased disc and tool efficiency

MEGUIAR’S SOFT BUFF DA FOAM FINISHING DISCS

• Improved foam technology eliminates minor to moderate surface defects while restoring a luxurious high gloss finish with no swirls

• Low profile for optimized performance

• Advanced finishing results from increased disc and tool efficiency

MEGUIAR’S SOFT BUFF ROTARY FOAM

• 7” pad size reduces chatter resulting in smooth, easy buffing

• Recessed backing for easy centering

• Quick and easy pad changes with hook and loop attachment system

3M PERFECT-IT ULTRAFINE POLISHING PAD

• Provides soft, smooth surface for applying polishes

• Used to help eliminate swirl marks and apply high gloss finishes

• Waffle face provides sufficient contact surface while holding polish well

3M PERFECT-IT WOOL COMPOUND PAD

• 100% wool product aggressively removes clearcoat scratches with smooth, controlled rotary action

• Wool remains cooler than foam making it ideal for heat sensitive parts

• Fast cut removes heavy oxidation efficiently

CUTTING PADS

9”

3M PERFECT-IT FOAM POLISHING PAD

• Provides soft surface for applying polishes

• Waffle face provides smooth contact surface, for even handling over curves without excess heat build up

• Effective removal of sanding marks and severe defects

• Wool fibers for effective cutting MEGUIAR’S SOFT BUFF ROTARY WOOL

• Waffle face provides sufficient contact surface while holding polish well

• Pads can be used with either pneumatic or electric variable speed polishers to produce desired final finish

3M

PAINT CORRECTION

3M’s best-performing rubbing compound for removing P1200 or finer sand scratches. Formulated for a broad range of user conditions without sticking or leaving residual film. Works especially well on many newer, harder to buff clear coats.

3M PERFECT-IT EX MACHINE POLISH

Highest-performing machine polish 3M has ever introduced for removing compound swirl marks in collision repair. Stays wet longer, letting you use less polish for the same refined finish. Holds better on the pad for reduced sling and easier cleanup.

3M PERFECT-IT

ULTRA FINE EX MACHINE POLISH

Highest-performing machine polish for removing ultrafine swirl marks. Quickly and completely removes machine polish swirls, even on black vehicles. Longer wet time, so more polish time while using less product.

NORTON FARÉCLA G360 SUPER FAST COMPOUND

Designed for rapid defect removal and finishing. The G360 Super Fast Compound quickly cuts through scratches and imperfections, delivering a smooth, even surface, while the Finishing Compound refines and polishes to a high-gloss, swirl-free finish.

MEGUIAR’S M122 SURFACE PREP

• Spray & wipe to prepare surface for paint correction, touch-up paint, or coatings

• Reveals true paint condition for defect inspection during paint correction

• Quickly remove dust, polishing oils & compound residue for maximum bonding

• Quickly remove dust, polishing oils & compound residue for maximum bonding

MEGUIAR’S MIRROR GLAZE COMPOUND

• Fast cutting compound with advanced technology

• Quick removal of 1200 grit and finer sanding marks for easier polishing

• Removes deep scratches, acid rain, and severe swirls/holograms

• Works great on fresh and cured paints, and is safe and effective on all glossy paint finishes including clear coats

Compound

Ultra-Cut Compound

Ultra-Cut Compound

Ultra Finishing Compound

Ultra Finishing Compound

MEGUIAR’S M34 MIRROR GLAZE FINAL INSPECTION PROFESSIONAL SPRAY DETAILER FOR FINAL TOUCH

• Quick and easy-to-use spray-on, wipe-off formula that safely removes fresh and light contaminants while maintaining an amazing shine

• Use to evaluate paint repairs, look for surface defects or as a final wipe-down

• Body shop safe formula sprays on and wipes off for quick cleanup of compound, polish and residue

• Safe and effective on all paint finishes including clear coats

MEGUIAR’S MIRROR GLAZE

INSPECTION MIST & WIPE

• Quick and easy to use mist-on and wipe-off formula that will safely remove fresh and light contaminants while maintaining an amazing shine

• Use to evaluate paint repairs or look for surface defects

• Body shop safe spray and wipe for quick clean-up of compound, polish, and residue

• Safe and effective on all paint finishes including clear coats

SAFETY EQUIPMENT

SAS NSX® SAFETY EYEWEAR

• 99.9% UV protection

• Anti-fog coating on lens

• High-impact polycarbonate lens

• Meets ANSI Z87.1+

• Scratch resistant coating

• Single lens design

• Wrap-around lens

SAS5340

SAS5341

SAS NSX SAFETY EYEWEAR w/ SHADE 5 LENS

• Light gas welding

• Light to medium cutting

• Soldering

• Torch blazing

SAS5346

SAS WORKER BEES SAFETY EYEWEAR

• Impact polycarbonate lens

• 99.9% UV protection

• Scratch resistant coating

• Ideal visitor specs

• Fits over most prescription glasses

SAS DIAMONDBACKS SAFETY EYEWEAR

• High-impact polycarbonate lens

• 99.9% UV protection

• Anti-fog coating on lens

• Scratch resistant coating

• Lightweight wrap-around lens design hugs the face

• Non-slip nose piece and temples

• Meets ANSI Z87.1+

SAS540-0100

SAS540-0101

SAS540-0103

SAS540-0200

SAS540-0201

SAS540-0203

SAS540-0205

SAS540-0210

3M SECUREFITTM

PROTECTIVE EYEWEAR

• Slotted ribs that provide comfortable pressure equalization

• Flex and self-adjust to the size of the wearer’s head

• Anti-fog and Anti-scratch

• Clear lens and frames

SAS STANDARD GOGGLES

• 99.9% UV protection

• Anti-fog coating on lens

• Meets ANSI Z87.1+ Part#

SAS5101

SAS OVERSPRAY GOGGLES

• Impact resistant polycarbonate lens

• Anti-splash: special vents prevent liquid from getting into eyes

• Flexible PVC construction

SAS5110

PERFORMANCE TOOL SAFETY GOGGLES

• Durable and lightweight polycarbonate lens

• Fully adjustable elastic headband fits all sizes

• Designed to fit over personal eyewear

• Ventilated for comfort

3M VERSAFLOTM

PEEL-OFF VISOR COVERS

• Up to five covers can be attached, one on top of the other

• 40 covers per case

PERFORMANCE TOOL PROTECTIVE EAR MUFFS

• Foam-filled ear cups provide excellent noise reduction

• Soft, wide ear cushions for a comfortable fit

• Folding design for easy storage

• Lightweight for all-day comfort

• Noise reduction rating: 25 dB

SAS STANDARD EARMUFF

• Lightweight multi-style hearing protector

• Under-the-chin, over-the-head or behind-head wear

SAS FOAM EAR PLUGS

• Pre-shaped foam ear plugs

• Super-soft foam ear plugs conform to the inner ear canal

SAS STANDARD FACE SHIELD

SAFETY EQUIPMENT

• Impact-resistant polycarbonate shield for long lasting protection

• Curved design protects a larger area for facial protection

• Push and turn ratchet-sizing adjustment

• Easy dial adjustment for individual visor positioning

• Suitable for general grinding applications

SAS EMERGENCY EYEWASH STATION

• Provides a minimum 15-minutes flushing period

• Portable unit measures 20.15” x 16.5” x 9.5”

• One-hand operation

• Lockable cap

• Holds 9.65 gallons of water Part#

SAS5134-00

SAS PRESERVATIVE EYEWASH

SAS DELUXE FACE SHIELD

• Spherical lens design provides larger area for facial protection

• Closer curved fit for comfort and greater range of motion

• Impact-resistant polycarbonate shield for long lasting protection

• Large spark deflection

• Push and turn ratchet-sizing adjustment

• Tension dials increase and decrease tension of shield placement

• Not for welding

• Use with eyewash station SAS5134-00

• Potable water preservative

• Add one bottle for each 15 gallons of water

SAS5136-01

4 Oz.

SAS DERMA-MAX® NITRILE GLOVES

• Non-latex and powder-free exam grade nitrile

• Durable and comfortable with textured fingers for better grip

• 8 mil thickness

• 50 gloves per pack

SAS6606-40

SAS6607-40

SAS RAVEN® NITRILE GLOVES

• Outstanding strength, wear, dexterity

• Powder-free exam grade nitrile with texture for enhanced gripping power

• 5 mil thickness

• 100 gloves per pack

ATLANTIC SAFETY PRODUCTS OUTRAGEOUS ORANGE® GLOVES

• Raised diamond pattern for superior grip in wet conditions

• Beaded cuff

• Engineered to wear longer with less hand fatigue

• 8 mil thickness

• Touchscreen compatible

• 100 gloves per pack

ATLANTIC SAFETY PRODUCTS® INTOUCH® BLACK NITRILE GLOVES

Made of 100% quality black nitrile, the InTouch series gloves provide the superior combination of durability and protection against day-to-day hazards at a cost effective price.

• Fingertip textured grip

• 5 mil thickness

• 100 gloves per pack

ATLANTIC SAFETY PRODUCTS BLACK LIGHTNING® NITRILE GLOVES

• Superior strength & stretch - No more tearing

• 100% quality Nitrile

• Tested against Fentanyl

• 100 gloves per box

• 6 mil thickness

SAFETY EQUIPMENT

ATLANTIC SAFETY PRODUCTS

ORANGE LIGHTNING® NITRILE GLOVES

• Raised diamond pattern for superior grip in wet conditions

• Beaded cuff

• 8 mil thickness

• Touchscreen compatible

• 100 gloves per box

SAS PAWZ® NITRILE COATED PALM GLOVES

• 15-gauge seamless nylon shell

• Liquid dipped 100% nitrile palm coat

• Knit back helps keep hand cooler

• Coated palm offers superior grip, abrasion and puncture resistant

• One Pair

SAS640-1907

SAS640-1908

SAS640-1909

SAS NITRILE PAINTER’S GLOVES

• Tough against chemicals, solvents, hazardous liquids, PVC cements and standing water

• Textured for superior grip on wet or slippery material

• Puncture and abrasion resistant

• 15 mil thickness

SAS6532

SAS6533

SAS6534

SAS DYNA-GRIP LATEX DISPOSABLE GLOVES

• Provides excellent fit, comfort, flexibility and performance and fully textured for excellent grip

• Beaded cuff for easy donning

• Powder-free exam grade latex

• 7 mil thickness

• 100 gloves per box

SAS650-1001

SAS650-1002

SAS650-1003

SAS650-1004

SAS650-1005

SAS VALUE-TOUCH® LATEX DISPOSABLE GLOVES

• Stretches and conforms for superior fit and feel

• Economical latex protection

• 5 mil thickness

• 100 gloves per pack

ZEP® SHELL SHOCK HD HAND CLEANER

An industrial hand cleaner that utilizes the natural cleaning power of soy solvents and abrasive walnut shells to clean the toughest grime and grease. Enriched with skin softening ingredients to keep hands from drying, and will leave hands soft. An environmentally conscious choice which uses the renewable resources of soy-based solvents and walnut shells.

3M PAINT BUSTER HAND CLEANER

• Excellent for removing automotive paint, fillers, adhesives and sealants from skin

• Easily keep hands clean to help ensure topquality results in collision repair

• Paste type cleaner dispenses easily and won’t run

• Flows and spreads when hands are rubbed together

ZEP CHERRY PUNCH HAND CLEANER

Combines an aggressive cleaning ability with gentle treatment of the hands. It has a pleasant cherry scent, and is enriched with emollients to leave the hands feeling great even after repeated washings. It is also made with mild, low-odor solvents to produce clean, fresh smelling hands. Quickly and easily rinses clean from the hands, and is also phosphate-free.

ZEP CHERRY BOMB HAND CLEANER

SAFETY EQUIPMENT

Tough on dirt and grime, and gentle on hard-working hands. It is formulated to remove stubborn industrial soils such as inks, resins, paints, adhesives, tar, carbon, and asphalt. The use of mild, low-odor solvents and no phosphates helps to prevent skin damage from frequent washings.

ZEP WALL DISPENSER

Constructed of anodized aluminum and reinforced nylon for a durable, versatile unit that is nearly indestructible. The stainless steel pumping mechanism is resistant to corrosion, rust and abrasion.

Part#

ZEP TKO HAND CLEANER

Soothes hands with a smooth lanolin-enriched waterbased formula while scrubbing pumice and heavy duty detergents clean deep to remove grease, paint, tar, ink, adhesives, oil and grime.

PERMATEX FAST ORANGE® SMOOTH LOTION HAND CLEANER

Pure, fresh smelling natural citrus power does the cleaning. Fortified with aloe, lanolin, glycerin, and other skin conditioners. Smooth Formula gently deep cleans and removes the toughest dirt.

PERMATEX FAST ORANGE FINE PUMICE LOTION HAND CLEANER

Fortified with aloe, lanolin, glycerin, and other skin conditioners to soothe raw, rough hands. Deep cleans the toughest dirt with the fresh smell of citrus.

TUB O’ SCRUB® HD HAND CLEANER

• Easily remove tough grease, oil, and dirt without water

• Pumice-free, biodegradable walnut shell formula that does not clog drains

• Does NOT contain solvents or petroleum

• Features lanolin, aloe and Vitamin E

• Fresh citrus scent

SCOTT ORIGINAL SHOP TOWELS

These blue shop towels absorb 2X more than the leading value brand paper towel for your everyday jobs. Soft, absorbent and can be used for cleaning up oil spills, changing oil, refilling fluids and other general automotive maintenance. They can also be used to absorb large liquid spills and leaks, routine cleaning and maintenance and removing soils and liquids from face and hands.

TUB O’ SCRUB HD HAND CLEANER

• 10” x 12” oversized wipe

• 100% solution soaked

• Contains no harsh chemicals

• Foaming agent lifts grime off surfaces

• Durable fiber weave

• Contains lanolin, aloe, and Vitamin E

SCOTT RAGS IN A BOX

All-purpose towels can be used for a variety of jobs, such as surface cleaning, arts and crafts, DIY projects, outdoor cleaning and general maintenance around the house. Designed for tough jobs, these cloth-like rags are soft, absorb 2X more and are 2X more durable when wet, compared to the leading value brand paper towel.

SAFETY EQUIPMENT

SAS GEN-NEX® HOODED COVERALLS

• Anti-static

• Cloth-like fiber material

• Full pullover hood

• Full zipper front

• Elastic wrist and ankle closures

• Washable and reusable

SAS GEN-NEX PAINTER’S COVERALLS

• Anti-static

• Non-woven microporous material

• Full zipper front

• Elastic wrist and ankle closures

• Washable and reusable

SAS POLYPROPYLENE

NYLON/COTTON COVERALLS

• Ideal for non-hazardous dry environments and light splash applications back

• Lightweight and comfortable

• Elastic wrist and ankle cuffs

• Full zipper front

• Disposable

SAS GEN-NEX MOONSUIT

NYLON/COTTON COVERALLS

• Full pullover hood

• Hook-and-loop wrist and ankle closures

• Elastic waist

• Full zipper front

• Lightweight, durable rip-stop nylon front

• Front chest and back pockets

• Machine washable

• Breathable, cool poly cotton back

SAS6937

SAS6938

SAS6939 SAS6940

SAS HEAVY-DUTY PVC RAIN SUIT

• 3 piece construction made of 0.35mm PVC/polyester

• Adjustable cuff and ankle snaps for better fit

• Bib overall with adjustable suspenders

• High-visibility color

• Jacket with detachable drawstring hood and corduroy collar for comfort

• Storm front snap with zipper

• Two flapped pockets

• Ventilated cape back

SAS6812-01

SAS6813-01

SAS6814-01

SAS6815-01

SAS6817-01

SAS GEN-NEX SHOE COVERS

• Easy to slip over shoes

• Keeps shoes clean

• Machine washable

• Slip-resistant soles

PPG BLUE PAINT SUIT

• Anti-static material

• Protects against fibers, dust, lint and paint

• Durable and breathable

• Reusable

PPGBLUEPSS/EA

PPGBLUEPSM/EA

PPGBLUEPSL/EA

PPGBLUEPSXL/EA

PPGBLUEPSXXL/EA

PPGBLUEPSXXXL/EA

*2 Piece Suits

NYLON PAINT COVERALL

• Protects against nonhazardous chemicals, like waterbased paints or harmless cleaning detergents

• Elastic sleeves for perfect fit

• Durable and Well Ventilated

EMM513054

EMM513056

EMM513058

EMM513060

EMM513064

5101 SERIES WHITE NYLON SPRAY COAT

• Protects against fibers, dust and lint

• Elastic sleeves for perfect fit

• Durable and Well Ventilated

EMM510154

EMM510156

EMM510158

EMM510160

EMM510162

SAFETY EQUIPMENT

SATA PAINT SUITS

• Elastic waistband to avoid brushing against the paint job while spraying

• Heavy-duty zipper

• Breathable polyester that offers superior protection over clothing

• Includes a hood

SAT530050W

SAT530052W

SAT530054W

SAT530056W

SAT530058W

SAT530060W

SAT530062W

SAT530064W

SAT520050G

SAT520052G

SAT520054G

SAT520056G

SAT520058G

SAT520060G

SAT520062G

SAT520064G

3M N95 PARTICULATE

RESPIRATOR 8210

AKZO PERMANENT PAINT SUIT

• Anti-static material

• Protects during paint application process

• Ankle and wrist elastic bands for perfect fit

• NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particles

• Two-strap design with welded dual point attachment helps provide a secure seal

• Cushioning nose foam

SAS N95 PARTICULATE RESPIRATOR

• Adjustable nose bridge with foam strip

• Latex-free adjustable head straps

• NIOSH Approved

3M N95 PARTICULATE RESPIRATORS

• NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particles.

• Exhalation Valve to help release warm and moist exhaled breath from inside the respirator

• Adjustable nose clip options help provide a custom seal

• Braided elastic strap material

• Braided elastic strap material

• Recommended for welding

• Supple form fitting

• Less tension head strap design for a secure fit

• Better vision and balance a cartridge design

• Polycarbonate

• NOSH approved

3M DUAL CARTRIDGE RESPIRATOR ASSEMBLY

• NIOSH-approved against certain organic vapors (black label)

• Recommended for use in a variety of workplace applications, including petrochemical, chemical manufacturing, construction, transportation, electronics, and more

3M FULL FACE PIECE RESPIRATOR ORGANIC VAPOR/P95 PACKOUT

• Includes 1 full face piece respirator, 1 pair organic vapor cartridges, 1 pair filter retainers, 2 pairs of P95 filters and 2 face shield covers

• Recommended for spray paint applications

SAFETY EQUIPMENT

3M DUAL CARTRIDGE RESPIRATOR PACKOUT

• Includes half face piece, 1 pair organic vapor cartridges, 1 pair filter retainers, and 2 pairs of P-95 filters

• Recommended for spray paint applications

3M SECURE CLICK™ HALF FACE PIECE REUSABLE RESPIRATOR

• Designed to help provide easier communication while you work

• Push button seal check is an easy way to conduct the required seal check prior to each use

• Secure connection style enables a quick, simple connection of filters and/or cartridges

3M PROFESSIONAL SERIES PACKOUT

• Includes half face piece, 1 pair organic vapor cartridge, 1 pair retainer, and 2 pairs of particulate filter, P95

• Swept back cartridge design

• Recommended for spray paint applications

3M HALF FACE PIECE REUSABLE RESPIRATOR

• Recommended industries include construction, general manufacturing, heavy infrastructure, industrial maintenance, mining, oil and gas, transportation, and more

• Use with particle filters 2000, 2200, 7000, or 5000 series to filter certain particulates

• Use with 6000 Series Gas/Vapor Cartridges to help filter a broad range of gases and vapors

3M VERSAFLO POWERED AIR PURIFYING RESPIRATOR KIT

• PAPR blower with battery rated at Division I for Classes I, II, and III under the most current UL standard

• NIOSH-approved PAPR system.

• Battery includes a bumper to help absorb impact

• Mechanical attachment of the battery helps prevent removal during use

• Audible and visual alarms alert users to low battery and low air flow

3M VERSAFLO TR-600 & TR-800 SERIES PAPR FILTERS

Respiratory protection against dusts, mists, fumes and other particulate hazards, and a variety of gas and vapor hazards, including organic vapor and acid gas.

3M HALF FACE PIECE RESPIRATOR PACKOUT

• Nuisance level relief against organic vapors, and ozone protection up to 10 times the Occupational Exposure Limit

• Compatible with a wide variety of NIOSH-approved 3M respiration cartridges and filters

• P100 Filter

SAS PEEL-OFF LENS COVER

• Protect the lens on your respirators and goggles with these easy-to-use Peel-Off Lens covers

• Made to protect against paint and chemical overspray

3M FACE SHIELD COVER

• Accessory to protect lenses from scratches and dust

• Designed for use with 3M Full face piece 6000 Series

• Recommended for use in painting applications

SAFETY EQUIPMENT

SATA AIR VISION 500O FULL FACE RESPIRATOR SYSTEM

• Absolute safety through external supply of clean air to the spray booth – up to 100 times TRC value and suitable for continuous use

• No inhalation resistance, very comfortable breathing

• Ergonomic design with individual adjustment options and one-hand operation of the visor

• Little operating costs, quick pay-off of purchase costs

• Soft-stream flow-optimized air distribution in the hood

• Reduced sound level: 64 dB (like a conversation in 1m distance)

• The SATA CCS Discs (Color Code System) allow to personalize hood, SATA air regulator and SATA air carbon regulator

• Single solvent resistant tear off visors over an aperture in the front of the mask, ensuring 100% visibility and reduction in light reflections.

SATA VISION 200O FULL FACE RESPIRATOR SYSTEM

• High breathing air quality due to air supply independent of ambient air, no inhalation resistance, high breathing comfort

• High protection level, suitable for long application intervals

• Protects up to 100 times the TRK-value

• Visor allows one-hand operation

• Single solvent resistant tear off visors over an aperture in the front of the mask, ensuring 100% visibility and reduction in light reflections.

Visor Foil (5 Pack)

Visor Foil (20 pack) SAT210468

Hygiene Inserts (20 Pack) SAT211912

3M RESPIRATOR CLEANING WIPES

• Moist towelettes clean dirt and perspiration off face piece respirators

• Convenient for respirator hygiene and sanitary protection between uses

• Individually packaged and sealed to ensure uncompromised sanitary quality

• Alcohol-free towelettes contain no alcohol or harsh chemicals

BRO-TEX 15” x 18” ABSORBENT PADS

Universal sorbent pads are perforated at 7.5″ for quick and easy spill clean up. Universal/general absorbent pads are ideal for absorbing both water and oil based fluids such as transmission fluid, coolants, gasoline, grease, solvents and more. Durable on abrasive floors.

OIL-DRI® PREMIUM ABSORBENT

• Recommended for warehouses, shops, and garages

• Soaks up oil, grease, water and odors

OPTISORB® OIL ABSORBENT

BRO-TEX SORBENT DRUM TOP COVER

Absorbent drum-top pads are precut to fit 55 gallon drums with allowance for fill and breather holes. Universal/general purpose and will absorb a variety of substances such as oils, water, solvents, and coolants.

PIG ADHESIVE-BACKED GRIPPY FLOOR MAT

• Stays exactly where you put it with no shifting, bunching up or flipping over to prevent slips, trips and falls in workstations and around machinery

• 32” x 100’

• Traps oil, grease and grime to keep them from being tracked around

• Absorbs up to 10.5 gallon per roll

• Use on concrete, vinyl, linoleum, tile and laminate flooring

• Quickly and easily soaks up messy spills from water, oil, and grease

• Coarse granulation

FLOOR-DRY® ABSORBENT

• Cleans up spills with no slippery residue or film

• Lightweight bag to reduce back strain

25 lb. bag

PIG DRI LOOSE ABSORBENT

This silica-free loose absorbent combines the heavier consistency of clay with high absorbency to pull industrial liquids from your floor. Also great for outdoor use because it doesn’t blow around.

UNI-RAM RECYCLING LINER BAGS

SHOP EQUIPMENT

• Keeps garbage cans clean and organized

• Resists tears and punctures

• Recyclable

• 10 bags per package

AUTOBODY MASTER SPRAY GUN CLEANING SOLVENT

Formulated for fast and efficient cleaning of spray guns. Removes old hard dry finishes and can be used over and over many times.

3M SPRAY GUN CLEANER

A low VOC aerosol specifically formulated for removing waterborne and solvent-based coatings from metals, plastic and composite surfaces.

SEM XXX UNIVERSAL GUN CLEANER

• Removes waterborne or solvent-based paint and overspray

• Superior 100% virgin solvent formula

• 2-in-1 cleaner reduces products needed in collision center

• Reduces mistakes from choosing wrong or faulty cleaners

• Cleans as well as dedicated solvent or waterborne cleaners

KLEAN-STRIP NAKED GUN GOLD GUN CLEANER

A strong, high solvency, urethane grade cleaner specifically formulated for use in automatic gun washers. It prevents loading and redepositing of paint and pigment, outlasts inexpensive thinner, and helps prevent gun washer pump foul ups.

KLEAN-STRIP NAKED GUN SPRAY GUN PAINT REMOVER

Provides a powerful aerosol spray stream that removes both solvent and waterborne paints from hard to reach areas. There is no need for special equipment or timeconsuming dipping, thereby reducing cost. Removes paint from spray gun bodies, tips, and cups, as well as many other shop surfaces.

S&G TOOL AID PAIL PUMP

• Fits all 5 and 6 gallon pails

• Easily dispenses fluid with lift action

• For use with all non-corrosive liquids

• Teflon seal designed for use with thinner

• Fully plated, steel construction

• Dependable and long lasting

SGT17500

S&G TOOL AID DRUM PUMP

Lift action handle dispenses approximately 1 1/2 pints per complete stroke.

SATA TRUESUNTM COLOR MATCH GUN

• Near perfect daylight conditions on any color shade, no need to move the project outside

• Uniform distribution of the light intensity across the entire light cone

• Use to transfer petroleum based fluids such as lubricants, anti-freeze, solvents, thinner and other non-corrosive liquids

• Teflon seal

• Fully adjustable suction tube fits 15, 30 and 55 gallon drums

• Plated steel construction

• Curved discharge spout is removable

• Bung adapter fits all standard drums

S&G TOOL DRUM FAUCET

• For use with all petroleum products, lacquers, varnishes, thinners, alcohol and auto antifreeze.

• Drum faucet is 3/4” NPT Male.

• Zinc plated inside and outside for improved corrosive resistance.

• Has nylon valve for longer life and better seal on thin liquids.

• Automatically self-closing.

• Can be padlocked only in closed position.

• Not for use with trichlorethylene and other chlorinated products or detergents and water solution chemicals.

Part#

SGT17650

• Battery life approximately 70 minutes at full light intensity, lasting for an entire day’s production in most shops

• Uniform light intensity – unaffected by the battery charge level

• Fast charging cycle time of approximately 50 minutes

• Adjustable light intensity

• Built-in charge level display

• Near daylight reproduction of color pigments

• Coating flaws such as mottling and poor hiding can be easily detected

MEGUIAR’S SUNLIGHT 3+ PROFESSIONAL PAINT INSPECTION LIGHT

The perfect tool for anyone looking to inspect their paint for a myriad of defects. This simple-to-use light redefines what is possible from a single light, allowing users to identify pre-existing defects, check their paint correction work, verify paint match, or even to inspect after applying a coating for the presence of high spots.

SHOP EQUIPMENT

INNOVATIVE TOOLS SUNMATCH 4 WORK LIGHT

• Compact LED Work Light With All-New CCT Scan Function for Car Detailing & Color Matching

• Features a stepless dimmer function in the range of 10% to 100% as well as a spotlight for inspection.

• Both dust and waterproof, IP65. Also supplied with a solvent resistant glass lens and a battery indicator at the front.

Part#

INNSG-SM-4

INNOVATIVE TOOLS SCANGRIP MULTIMATCH 3 WORK LIGHT

Features the unique ALL DAYLIGHT function, providing you with the option to choose between 5 different color temperatures. The 5-step dimmer function makes it possible to adjust the light into five different levels depending on the job at hand.

Part#

INNSG-MM-3

3M PPS SUN GUNTM II LIGHT KIT

Replicates natural sunlight to better match paint colors. Identify pre-painting defects such as pin holes and scratches as well as post-painting defects such as swirls marks, burn through, sand scratches and dirt nibs. Part#

E-Z MIX PLASTIC MIXING CUPS

These cups are not just containers; they are precision tools that empower you to achieve unparalleled accuracy in your mixing processes. From automotive refinishing to artistic creations, these cups are your key to achieving consistently professional results.

E-Z MIX PAPER MIXING CUPS

• Disposable, small, and efficient tools that are sustainable

• 400 per box

E-Z MIX TOUCH-UP BOTTLES

• E-Z to use bottle graphics for mixing accuracy with ratios for 2,3 and 4 stage applications

• Made of HDPE

• 50 per box

E-Z MIX CLEAR TOUCH-UP BOTTLES

E-Z MIX AMS

PLASTIC MIXING CUPS

• Available in the most popular mixing ratios

• Economical for today’s business environment

• The answer to eliminating those awkward mixing sticks

• Made of PET shatterproof, clear plastic

• Ideal for touching up small areas and repairing car paint

• 50 per box

COLAD® TURBOMIXTM PAINTSAVERTM PAINT STIRRER

Perfect consistency and pigment blend are crucial for a spotless end result. Mixing paint with the Turbomix Paintsaver paint stirrer speeds up the process, reduces paint wastage and ensures a perfect result. Built-in ‘break it to save it’ system ensures any excess paint is effortlessly removed before disposal (up to 5-7 grams per use).

PPG PAINT CANS W/ LIDS

SHOP EQUIPMENT

Durable and convenient containers designed for storing and applying various types of paint, including interior, exterior, and specialty coatings. They come in 1 pint, 1 quart, or 5 gallons and feature tight-sealing lids to prevent spillage and maintain the paint’s freshness.

PPG DOX MIXING CUPS

Durable, transparent containers designed for precise measurement and mixing of paints and coatings. Clear, easy-to-read graduated markings for accurate ratios, ensuring consistent and reliable mixtures. These disposable cups are ideal for use in automotive, industrial, and DIY painting projects, providing convenience and efficiency.

AUTOBODY MASTER PAINT STRAINER

A fine mesh tool used to filter out debris, clumps, and impurities from paint before application. It ensures a smooth, consistent finish by preventing contaminants from clogging spray guns or creating imperfections on the painted surface. Made from medium nylon mesh, 1000 strainers per box.

GERSON® MICRON PAINT STRAINER

• No touch contamination-free storage and dispensing of strainers.

• Automated production with triple-cleaned mesh assures highest level of filter purity.

• White mesh

• Sold By Box Of 1000

EZ MIX 12” WOODEN PAINT STICKS

With these wooden paint sticks, you can ensure a smooth application.

AUTOBODY MASTER

12” PAINT MIXING STICKS

Durable wooden tools ideal for mixing automotive paints and coatings. Smooth, strong, and perfect for achieving a consistent mix in any painting project.

PPG PAINT 14” STIR STICKS

These 14-inch paint stir sticks from PPG are perfect for mixing paint, stain, or varnish. Made from high-quality wood, they are sturdy and designed to handle thick liquids, ensuring an even mix every time.

PPG METAL AUTO PAINT MIXING MEASUREMENT STICK

Durable and reliable tool designed for mixing automotive paints. Made from high-quality metal, it ensures thorough blending of paint components for a smooth and even application.

PROTOUCHTM TOUCH UP BRUSHES

The uniquely designed microbrush is comprised of small non-linting, nonabsorbent fibers. Paint or solutions are held in suspension between the fibers creating a non-dripping sphere which contains the materials you want to apply. Easily bends to enable accurate placement of paint and lubricants in hard to reach locations. Part#

USC® AUTO WRITER MARKERS

Safely write on a variety of surfaces with our easy-to-use, fast drying, vibrant markers. Write temporary information on vehicles for refinish and/or collision repair work. Will write on a variety of surfaces including steel, plastic, glass (windshields), wood and rubber. Comes with 12 markers with 6 different colors.

OAKUSC37001

OAKUSC37002

OAKUSC37003

OAKUSC37004

OAKUSC37007

OAKUSC37008

All In One Kit USC37000

E-Z MIX TOUCH-UP BRUSHES

Retouching paint, distributing lubricants, and applying adhesives. Optimal bristles can reach even the toughest areas. Ergonomic design to attain the best results.

E-Z MIX DABBERS

Ideal solution for a wide range of precision tasks. Extract dust or contamination from freshly sprayed paintwork, without affecting the finish.

E-Z MIX TOUCH-N-GO PRECISION APPLICATOR

Kit includes 10 syringes and 20 blue tips that draw in glue, clear, paint, and more. Add a blue tip, and you have a mobile touch-up system. Touch-N-Go can also be used to remove runs and repair fisheyes.

Color Blue Pink Yellow White Green Red

SHOP EQUIPMENT

PPG PAPER SPRAYOUT CARDS

Essential tools for testing paint colors and finishes before application. These cards allow you to check color accuracy, coverage, and appearance under various lighting conditions, ensuring the perfect match for your project.

PPG MIXING LIDS

Innovative and convenient solutions designed to simplify and enhance the paint mixing process. These lids fit securely on paint cans, allowing for easy and mess-free mixing, pouring, and storage.

• Spouts for controlled pouring

• Air tight seals to prevent drying out

• Durable construction to withstand repeated use.

PPGDEX1911/EA

PPGDEX1916/EA

PPGARMC464G3/PK

PPGARMC464G5/PK

PPGARMC464G6/PK

PPGARMC464G7/PK

white

light gray

G5 medium gray G6 dark gray

G7 dark gray

Spray Out Binder PPGDOX446/EA

PPG METAL SPRAYOUT CARDS

Ideal for color matching, testing application techniques, and checking the final appearance of the paint under various lighting conditions to see on a metal surface before applying it to a larger project.

G1 white G3 light gray

G5 medium gray

G6 dark gray

PPGDEXG7/BX

G7 dark gray

PPGDEX1811/EA

PPGDEX1814/EA

Modular Mixing - Quart Lid

PPG WATERBORNE MIXING DOSER

For use on Envirobase High Performance and Aquabase Plus waterborne mixing tints.

PPG CLEARCOAT DOSING LID

Variable flow spout 57 mm pour lid for clears and reducers. Designed for use on auxiliary containers for clears and reducers.

PPG PRIMER SHAKER COLLAR

Designed to securely hold and stabilize cans of waterborne primer during the shaking process to ensure thorough mixing.

PPGDEX620/EA

PPG POURING SPOUTS

Innovative and convenient solutions designed to simplify and enhance the paint mixing process. These lids fit securely on paint cans, bottles and jugs allowing for easy and mess-free mixing, pouring, and storage.

Description

PPGDOX318/EA

PPGDOX337/EA

PPGDOX339/EA

PPGDOX345/EA

PPGDOX382/EA

1 1/8” plastic threaded for 1/2 pint, pint and quart accupour cans

1 1/8” medal threaded for accupour quart cans

1 1/4” all plastic for metal threaded square gallon cans

1 1/8” for plastic white pint and quart bottles

1 1/4” for plastic gallon jugs

STECK PAINT ’N STICK

The Paint’N Stick conveniently holds your side view mirror or various parts while painting, allowing you to paint from all angles with ease. Includes two powerful magnets that hold parts securely in place for drying. This ensures a smooth, even finish and simplifies the painting process.

PPG QUART/LITER RISER

Allows user to place quart or liter cans on gallon shelves. Attaches magnetically for easy positioning. Part#

PPGDEX1703/EA

STECK PRO STEP

Designed with rugged construction to ensure durability and stability, making it a reliable companion in your garage or workshop. Surface is equipped with a non-slip feature, offering stability and preventing slips, ensuring safety while working at elevated heights. The reinforced legs provide additional strength and stability, ensuring wobble-free performance during use.

PERFORMANCE TOOL ALUMINUM WORK PLATFORM

Lockable work platform featuring nonskid feet and a weight capacity of 225 pounds.

• Locking safety legs

• PVC ABS plastic non skid feet

• 19 1/2” high, 15 1/4” wide and 30” long

• Maximum weight capacity 225 lbs

SHOP EQUIPMENT

STECK WORK STAND CLAMP

Designed to securely hold a car door or other panels in place on a work stand (x-frame). Offers stability and convenience. Add versatility for holding parts while prepping jambs, making workflow smoother and more efficient.

STECK WORK STAND WHEELER

Simple and inexpensive wheeled platform for X-frame work stands that allows technicians to easily move loaded work stands.

STECK HATCH JAMMER

Secure the hatches quickly and efficiently.

• Ideal for holding the hatch open during prep, painting, buffing, and dent removal

• Securely attaches to the hatch’s striker and latch for a stable hold

• J-hook design ensures a firm grip on the striker

• Larger loop end locks into the latch for added security

STECK EZ REST DOOR HANGER

Padded, removable side rails allow for accurate positioning of the door.

• Padded, removable side rails

• Easy on/off design and fully adjustable

• Quickly adapts to most floor jacks with removable saddles

• Hang bumpers, store glass, and more

• Fits jacks with saddle hole dimensions of 1.17”-1.19”

• Car jack not included

STECK BUMPER TREE

Tilt while painting to give easy access to top, bottom, front, back and wrap-around ends.

• Openings in covers can be painted from the front and back to assure complete coverage

• Support chains easily adjust to secure bumper

• Foam rubber cushions cover the support rails, which also swivel to fit any bumper

• Tilt feature allows you to set your own working height and angle

Part#

STK35800

STECK BED LIFTER

• Lift pick-up truck beds safely and easily

• Lifting bracket adjusts to evenly distribute weight

STECK PANEL TREE

Center post design allows access to edge, bottom and both sides of the panel

• Paint panels, jambs, and car all at one time

• Hold one or two panels securely

• Adjustable arms to fit any size panel

INNOTATIVE ULTRA RACK

Paint the entire panel without ever putting the spray gun down. Spray the parts just like they fit on the vehicle for better color match and finish.

• Holds hoods, tailgates, doors, lift gates, deck lids, cargo doors and fenders

• Seven locking positions mimic the parts position on the vehicle for a seamless match

Part# INNURPS

INNOVATIVE BED LIFTTM

• Allows one-person truck bed removal

• Four rubber-padded support arms prevent damage

• Multiple adjustments for easy work height

• Adjustable center hook allows even weight distribution

• Powder-coat finish

• Recommended use with engine hoist or overhead electric hoist

INNI-BL 6 3/8”L x 1 1/2”W x 7/8”H

SHOP EQUIPMENT

INNOVATIVE DOOR FENDER SINGLE STAND

• 4″ industrial-grade Total-Lock caster wheels for stable mobility; zero movement when locked

• Durable powder-coat finish

INNOVATIVE DOOR FENDER CARGO OPTION

Works with the Innovative Door-Fender Stand and allows you to prep and paint large van doors with ease.

• Complete access to paint both sides

• Stores directly with the door fender-single

INNOVATIVE DOOR JACKTM

• Handle big bumpers and doors alone

• Ample padding, no metal-onmetal contact, no damage

• Industry’s only 8” front-toback tilting adjustment

• Side-to-side tilt adjustment for easier part removal & installation

• Wide stance for added stability

• Four industrial grade, easyglide total-lock caster wheels; zero movement when locked

INNOVATIVE CARGO DOOR-JACK OPTION

• Ample padding, no metalon-metal contact, no damage

• Industry’s only 8″ front-to-back tilting adjustment

• Side-to-side tilt adjustment for easier door removal & installation

• Wide stance adds uncompromised stability

INNOVATIVE TRUCK BED DOLLYTM

This auto body repair stand features easy, 4-way adjustment to fit any size truck bed. Also holds panels and hoods.

• Collapsed: 38″L x 44″W x 15″H

• Opened: 38″L – 59″L x 44″W x 26″H – 33″H

INNOVATIVE CARTS

• Everything needed to get the job done in one mobile location

• Monitor and track materials

• Rolls right into your work area for greater efficiency

• Keeps supplies handy and techs on the job

• Materials and supplies in full view from any angle

• Facilitates easy-to-use bar code system; tags provided

• Easy to rotate inventory to keep partially used material in front with backup supplies ready to go

• Enables repair and process controls for consistent quality, time after time

• Eliminates extra trips to the supply room and keeps technicians on the job

INNOVATIVE WALL BUMPERTM STORAGE RACK

• Totally adjustable wall racking system puts big bumper covers in their place & saves space

• Holds up to six large bumper covers

• Support arms adjust in seconds to customize your storage needs

• Support arms fold down when not in use

• High-carbon, heat-treated steel construction stands up to heavy loads

• Can be mounted top-bottom or side-by-side

• Durable powder-coat finish, stands up to rough handling

• Includes: 4 mounting rails, 12 – 24″ support arms and mounting hardware

• Support arms adjust every 3″ 39″W x 24″D x 41″H – 82″H

• Maximum Load Capacity: 200 lbs.

INNOVATIVE HARDWARE TRAYTM

Easily organize nuts, bolts, clips, and other small parts

• Greatly speeds up reassembly time

• Conveniently stores underneath any parts cart shelf

• Easily removed with a quick “lift & pull”

• Comes with a grease pencil to mark the clear lid

• Lid wipes clean with a dry cloth

Part# Size

INNSSPC-HT 32″W x 22″D x 40″H

INNI-MCDC

INNI-MCBM

SHOP EQUIPMENT

INNOVATIVE SUPERSTANDS

• Holds any plastic bumper cover without touching the painted surface

• Makes repairs, prep, and painting faster and easier

• Cover can be rotated 90 degrees to ensure proper paint coverage time after time

• Five locking positions

• Protective rubber boots keep critical areas overspray-free

• Four industrial-grade, total-lock caster wheels for stability; zero movement when locked

• 44″W x 30″D x 53″H

2

6

INNOVATIVE PARTS CARTS

The preferred parts management cart system of the auto body industry. This best-selling cart features an open design and 30 percent more shelf positions than most carts. It is ideal for major teardowns and repairs.

• Vertical storage saves valuable floor space

• No need to flip shelf over for easy space saving nesting

• Open design for easy loading & unloading

• Load parts directly from the delivery truck

• Less handling of parts means less risk of damage

S&G TOOL AID PORTABLE WORKBENCH

• Designed to hold large parts such as bumpers, hoods, doors, fenders and glass

• Can be moved easily and adjusted to desired height or width

• Made of strong tubular steel with thick foam padding to protect painted parts and glass from being scratched

• Rubber boots on legs prevent sliding

INNSS-2

3M P.A.R.T.S. STAND

A durable stand that holds doors, bumpers or other auto body panels and parts for painting during the repair process. Made from tubular 16-gauge steel, stand can hold panels up to 200 lbs. Rounded corners and pads at each end help prevent scratches and dents on panels. The stand easily adjusts into four positions for optimal paint coverage.

STECK EZ PULL PLIERS

Grip and pull multiple pull pins/studs and vertical or horizontal flanges.

• Wide serrated jaw for gripping

• 3.5 inch jaw provides evenly distributed pulling force while pulling multiple pull pins or flanges.

• 2 large pulling rings for light pulling (up to 2,000 lbs.)

• 1.5 inch ring for pulling vertical flanges

• 3 inch ring for pulling multiple pull pins & horizontal flanges

STECK HANDY PULL KIT

Featuring a sequence of threaded holes designed to fit behind panels, providing broader pulls in hard-to-reach areas.

• Eye bolts allow you to manually pull hinges, plates, and more

• Equipped with all the essential tools needed to handle different dent sizes and shapes

• Right angle pulling plate and a series of 6mm, 8mm, and 10mm threaded holes

• Fits behind panels to allow you to make broader pulls in hard reach areas

STECK QUARTER PULLER

Versatile pulling power, durable construction, precise pulling points, and user-friendly design. Simplify quarter panel repairs and restorations, ensuring seamless and accurate results.

• Achieve professional quarter panel and fender restoration tasks

• Hooks above the lip of the wheel opening

• Two curvatures (one on each side) fit almost all cars

• Easier and faster than clamps or jacks

• 3000 lb. pull capacity

Puller

Puller II - smaller 6” compact

STK20022

STK20033

SHOP EQUIPMENT

PRO SPOT® GLUE TAB DENT PULLING SYSTEM

• Repairs dents with no heat input AND saves you time by avoiding grinding and welding

• Great way to produce a quality dent repair while saving time and money - Pull dents in less than 10 minutes with fast-curing glue

• Works on most surfaces, including steel and heatsensitive materials like, HS steel and aluminum panels

• Cut repair time by avoiding welding or arc procedures

Part#

PROPRO-GTK

PRO

SPOT WINDSHIELD REPAIR KIT

• Easy to use 4-in-1 automated glass chip repair system

• Each step of the repair is guided by the tool, from removing moisture, to resin application and UV curing

• Repairs in under 10 minutes

PRO SPOT

VAC-U-PULL MOBIL DENT PULLING TOWER

An innovative and powerful solution for fixing dents anywhere. This state-of-theart tool is designed to make dent pulling easier, faster, and more efficient than ever before. Engineered to be lightweight and easy to move, making it an obvious choice for body shops. Part# PROVAC-U-PULL

PRO SPOT DENT PULL BAR

Designed for both aluminum and steel dent pulling, the Pull Bar features 4 and 6 jaw clamps and adjustable foot swivel pads for mounting both vertically and horizontally. It can also be used together with the Pro Pull for isolated dent pulling.

Part#

PROPB-10

PRO SPOT VAC-U-PULL DENT PULLER EXTENSION

Valuable enhancement for performing dent repairs on taller vehicles, providing greater versatility in your dent-pulling capabilities. Includes an extra suction plate and anchoring strap, guaranteeing that you can maintain the necessary pulling force, even when working on taller dents.

Part#

PROVAC-EXT

*Not compatible with PROVAC-U-PULL-XL

STECK MEASURE ‘N STICK

A professional magnetic tape measure that is perfect for those times when you have to measure solo or want a continuous measurement during a pull. The adjustable rear tip makes it easy to take hole-to-hole measurements.

• Great for body shops, insurance adjusters and fabricators

• Four powerful magnets on side, back and bottom for hands-free measuring

• 3/4” x 16 ft. metric/inches tape

• T-tip hooks into small holes

• Hole slide for hole-to-hole measurement

• Slide moves three ways

GFS REVO MANUAL HANDHELD LAMP 110V

Ideal for fast spot repairs, but can also be used for a variety of other applications. Can soften glass seals, heat up aluminum to repair aluminum-body vehicles, push out a dent, or remove emblems, vinyl graphics and adhesives. Allows you to get more repairs done faster, saving you time and money.

GFS REVO SPOT UNIT 220V-1PH w/o PLUG

Designed for small repairs and touch-ups, this unit offers efficient heat distribution, speeding up the curing process and reducing wait times. Its compact design and 220V single-phase power make it easy to integrate into your workspace. Ideal for auto body shops and other finishing applications.

Part#

GFSRVS-220

Part# GFSRVHH-110

SHOP EQUIPMENT

PRO SPOT I5S SMART SPOT WELDING SYSTEM

Comes equipped with the industry’s most advanced adaptive auto welding technology and robust on-board training resources. The i5s advanced welding control system senses, reacts and adjusts welding energy based on material composition, thickness and resistance properties in real-time.

• 9’ high, 5’ low, 51” reach

• Pivots left to right 180°

• Fits through doorways

• Easy movement between vehicles

• Balanced and safe

• Ergonomic

• 12,500 amps

• 30’ power cable

• 16.4’ weld cable

• Radiator / pump active loop cooled to electrode tips

• 3 phase input voltage Part#

PROI5S220V

Components

PRO SPOT I4S SMART SPOT WELDER

Built-in training provides technicians immediate resources to get the job done faster than ever. Wi-Fi connectivity, automatic updates from Pro Spot and weld log reporting via e-mail. Uses continuous feedback information and quickly gathers and adjusts to the weld as it’s occurring, providing accurate and proper welds.

• In gun display screen

• Fingertip controls

• Water cooled gun & arms

• 360º arm rotation

• Built in audio and video playback

• Touch screen

• Auto weld mode

• Manual weld mode

• Single-sided welding

• Input voltage: 3 phase: 208-240V, 400-480V

• Welding amperage: 12,500 max

• Weld cable length: 8.75’

Components

CHIEF M1300T THREE-PHASE SPOT WELDER

With up to 20 welding points per minute, the Mi300T is capable of welding at up to 14,500 max amperage securing enough power for repairs on all current and future metals used on vehicles.

• Watercooled power cables, electrodes and caps

• 5.7” LCD screen

• Automatic adjustment of pressure between electrodes

• Spot count feature determines the caps lifetime

• 80 mm of automatic opening capacity (20 mm at rest)

• Power supply: 208-240V or 480v

• Fuse 40 A slow blowing for 208v 20 A for 480v

• Frequency: 50/60 Hz

• Supply power: 14 kVA (80 kVA max)

• Nominal Power by 50% ED 20kVA

• Welding current max.: 14,500 A DC (at 230V)

• Electrode force: 1,236 lbs with 116 PSI

• Ambient temperature: 41˚ to 113˚ F

• Cable length input: main cable: 26’; weld cable: 20’

FORNEY 220MP (MULTI-PROCESS) WELDER, 120/230V

• Multi-process MIG, TIG, and stick welder. 120V/240V input power with 220 AMPs of welding power

• Up to 1/2” welding capacity

• .024” to .035” wire/electrode diameters

• Included accessories: 12.5’ 200 AMP PRO-Grip MIG gun, 15’ ground clamp with cable, 15’ electrode holder with cable, 15’ input power cable, flow gauge with hose, extra contact tips

FORNEY 220 AC/DC TIG WELDER AMPTROL™ PACKAGE

• Dual-voltage with 120V/240V input power

• Weld up to 1/2” with 220 amps of power

• Amperage control settings as low as 5 amps

• Included accessories: Amptrol TIG torch, 15’ ground clamp with cable, 15’ electrode holder with cable, 15’ input power cable, flowmeter with hose

SHOP EQUIPMENT

PRO SPOT PR-5 RIVETING AND BONDING STATION

Offers the perfect solution for demanding riveting work space environments. It not only organizes all of your tools and supplies into one convenient, lockable storage cabinet, it significantly increases your productivity through advanced engineering and technology.

• Applications: self-piercing, rivets, rivet removal, solid rivets, flow form, flattening, pin & collar, blind rivets, calibrating and BOM rivets.

Includes:

- PR-5 rivet gun system

- PRR-CQ-55-85 arm

- PRR-CQ-120-80 mid-size arm

- PR PA blind rivet adapter

- 2 rechargeable 18V lithium-ion batteries

- 6 heavy duty lockable drawers with foam insert storage inlays

- PR-5 rivet gun tool cradle to securely hold rivet gun

- Charging station with (2) 110v and (4) USB ports

- 8” digital WiFi tablet with interactive “Knowledge Center” for training videos and “How-To” instructions

PROPR-5-RBS

NORTON AUTOBODY UTILITY CABINET

Heavy duty, full length, durable hinges and security latches for locking all doors. Store all of your abrasives, tapes and chemicals, while keeping them clean, dry and secure.

CHIEF PHOENIX 30 SERIES FRAME RACK

Provides the size and flexibility to profitably repair today’s cars and trucks.

• 12,000 lbs. lifting capacity

• Self-leveling deck

• 22’ Rack Lengths

• 115 vac 50/60 single phase

• Powder coated components

LAUNCH X-431 ADAS PRO PLUS LDW STANDARD PACKAGE

• Precise stationary ADAS system

• The wheel clamp based system, along with laser measurement accuracy, will have calibrations completed in minutes

• Includes X-431 Turbo III, Laser range finder, and wheel clamp unit

FORWARD FACING “DELUXE” PACKAGE

• Includes everything in the Pro Plus kit, plus the ADAS Accessory Kit

PREMIUM PACKAGE

• Includes everything in the first two packages, plus:

LAUNCH X-431 ADAS MOBILE LDW STANDARD PACKAGE

• Designed to be used in the shop or taken on the road

• Easy foldable frame can fi t into any vehicle

FORWARD FACING “DELUXE” PACKAGE

• Includes everything in the LDW kit, plus the ADAS Accessory Kit

PREMIUM PACKAGE

• Includes everything in the first two packages, plus:

SHOP EQUIPMENT

FORNEY PRO AUTO-DARKENING FILTER (ADF) WELDING HELMET

Designed for experienced and professional welders or fab shop workers who frequently weld for long periods of time. The headgear is heavily padded, providing all day comfort for demanding and extensive welding jobs. The Arc Optics technology, and 43% larger viewing area provides a crisp and clear view of welds.

FORNEY BLACK MATTE AUTO-DARKENING FILTER (ADF) WELDING HELMET

Ideal for the experienced do-it-yourselfer, light contractor, farmer and rancher. This series of welding helmets offer easy to use technology, reliability and value. They also feature HD optical clarity with true color technology that allows user to comfortably see your welds.

CARBON FELT MAGNETIC WELDING BLANKETS

• Heat protection up to 1500 degrees Fahrenheit

• Easy mounting with integrated magnets

• Soft to the touch

• Great dust and debris protection

• Dimensions: 57”x72”

FORNEY EASY WELD BLACK MATTE AUTODARKENING FILTER (ADF) WELDING HELMET

The Forney Easy Weld series of auto-darkening welding helmets are ideal for hobbyists and novice welders. User friendly, comfortable, economical and cover a wide range of basic needs.

Part# FOR55731

Protective Lenses FOR55760

FORNEY SIGNATURE WELDING GLOVES

Reliable protection. Features heat- and abrasion resistant reinforced patches in key strategic areas for added protection. 5-inch split leather reinforced safety cuffs. Heat resistant synthetic thread stitching and self-welted seams provide extra strength and durability.

FORNEY BLUE LEATHER WELDING GLOVES

Tough and durable. This welding glove features heat resistant synthetic thread and cotton foam lining for excellent moisture absorption and heat protection.

FORNEY GRAY LEATHER WELDING GLOVES

Medium-duty split leather palm welding gloves feature an extended gauntlet safety cuff for extra wrist and forearm protection. Cotton lined for moisture absorption and comfort. Self-hemmed welting inseams provide extra strength to seams adding durability and strength to the glove.

FORNEY RUSSET LEATHER WELDING GLOVES

Medium-duty split leather palm welding gloves feature an extended gauntlet safety cuff for extra wrist and forearm protection. Cotton lined for moisture absorption and comfort. Self-hemmed welting inseam provide extra strength to seams adding durability and strength to the glove.

3M HIGH PERFORMANCE WELDING DRAPE

• Extreme resistance to heat, sparks, welding spatter and flames

• Ideal for protection from automotive welding spatter and grinding sparks

• Very lightweight, conformable and easy to handle

3M WELDING AND SPARK DEFLECTION PAPER

• Helps protect vertical surfaces from sparks and spatter

• Recommended wherever welding or grinding tasks are performed

• Adhesive backing allows for simple installation

SHOP EQUIPMENT

3M WELD-THRU COATING II

Protects bare metal panels and parts from corrosion after welding. Cleverly engineered to draw away contact corrosion and provide long-term substrate protection. Fast and easy spray-on application boosts shop efficiency and productivity.

SEM ZINCWELD PRIMER

A zinc-based weld-through primer that provides superior corrosion protection between welded substrates while minimizing heat affected zones and welding spatter.

STECK LED MIG LIGHT

• LED Light is long-lasting and durable

• Plastic shield to protect LED

• Attaches in seconds to any welding torch

• Auto shut-off after 30 min

LISLE SPOT WELD CHISEL

Use to separate panels after the spot weld has been drilled out. Drive the blade with a hammer from the end or the side through the panel seam. Panels are separated without damage. The blade is sharpened on three sides, and offset for clearance.

MOTOR GUARD SPOT WELD CUTTER

Quickly separates body panels from OEM welds. Features a high-quality U.S. Steel cutter and self-centering pilot for fast and accurate holes. Replaceable cutter is double ended for extended life. Arbor fits electric and pneumatic chuck type drills.

Part#

MTGJMC001

Replacement Cutters MTGJMC002

Replacement Pilot MTGJMC003

MAGNA DRILL SPOT WELD CUTTER

3/8”, double-ended drill and spot weld cutter

Part#

MTGJMD001

DRILL BITS

1/8”slotted, double-ended

S&G TOOL AID 1/8” STUBBY BODY PANEL DRILL BITS

• Made of high speed steel for sheet metal

• 135° split points for fast drilling without center punching

• Double ended bit can easily be flipped in a drill for new drilling end

• Packed ten drill bits in a hang-up plastic display vial Part#

SGT15210

AUVECO BODY HARDWARE MASTER PROGRAM

20 metal drawers, pre-labeled and pre-loaded with Auveco unit package quantities for easy refill and five 2-96 cabinets.

Part#

AUV6600BHM

AUV6601BHM AUV6602BHM

Small Retainers & Retaining Clips 24 Varieties, 840 Pieces

Large Retainers 22 Varieties, 965 Pieces

AUV6603BHM AUV6604BHM AUV6605BHM AUV6606BHM AUV6607BHM

Hood Insulation Retainers, Trim Panel Fasteners & Rubber Vacuum Caps 16 Varieties, 440 Pieces

Push-Type Retainers 22 Varieties, 445 Pieces

Push-Type Retainers 24 Varieties, 492 Pieces

Push-Type Retainers, Nylon & Specialty Rivets 24 Varieties, 680 Pieces

Specialty Rivets, Double End Drill & Moulding Clips 24 Varieties, 925 Pieces

AUV6608BHM AUV6609BHM AUV6610BHM AUV6611BHM AUV6612BHM

Moulding Clips & Fasteners, Plug Buttons & Wire Loom Clips 22 Varieties, 840 Pieces

Zinc Oval & Pan Head, & Specialty Tapping Screws 24 Varieties, 2,400 Pieces

Chrome & Black Head Sems, & Hex Washer Head Tapping Screws 24 Varieties, 1,825 Pieces

Black Oval & Pan Head & Specialty Tapping Screws 24 Varieties, 2,175 Pieces

Black Flat Top Washer Head, Specialty Tapping Screws 23 Varieties, 1,750 Pieces

AUV6613BHM AUV6614BHM AUV6615BHM AUV6616BHM AUV6617BHM

Black Hex Body Bolts 21 Varieties, 810 Pieces

Body Bolts & Bumper Bolts & Specialty Fasteners 12 Varieties, 445 Pieces

Spin Lock & Hex Flange

Nuts, Free Spinning Jack Nuts & Rubber Nuts 23 Varieties, 705 Pieces

J-Nuts, Spring type U-Nuts & Extruded U-Nuts 23 Varieties, 965 Pieces

Flat Nuts, U-Nuts, Tubular Nuts & Shims

11 Varieties, 950 Pieces

AUV6618BHM AUV6619BHM AUV6620BHM AUV6628BHM AUV6629BHM

Washer Lock & Thread

Cutting Nuts, Push-On Retainers & Pushnut Bolt Retainers

23 Varieties, 2,300 Pieces

Nylon Nuts & Screw Grommets

23 Varieties, 860 Pieces

Door Pins & Bushings, Headlight Hardware, Door Lock Rod Clips, Retaining

Clips & Cable Straps

14 Varieties, 336 Pieces

Oil Drain Plugs & Gaskets

24 Varieties, 105 Pieces

J.I.S Hex Flange Bolts & Spin Lock Nuts

21 Varieties, 550 Pieces

AUV6630BHM AUV6631BHM AUV6632BHM AUV6633BHM AUV6649BHM

Nylon Connectors & Rubber Caps

24 Varieties, 310 Pieces

Krimp and Seal Terminals & Connectors

24 Varieties, 240 Pieces

GM, Ford & Chrysler PushType Retainers

12 Varieties, 400 Pieces

Metal Specialty Rivets

24 Varieties, 850 Pieces

Small Size, Grade 5 USS Cap Screws, Nuts & Washers

8 Varieties, 1,150 Pieces

SHOP EQUIPMENT

AUVECO® ESSENTIAL PRODUCTS

ASSORTMENT PROGRAM

12 Metal drawers, pre-labeled and pre-loaded for easy refill. Comes with 3 free 2-96 cabinets.

Part#

AUV6700EPA

ASSORTMENTS INCLUDED WITH THE 6700EPA:

Body Bolts

21 Varieties

395 Pieces

AUV6701EPA

Screw Grommet

& Nylon Nuts

18 Varieties

335 Pieces

AUV6707EPA

Moulding Clips

20 Varieties

180 Pieces

AUV6702EPA

Nylon Rivets

12 Varieties

240 Pieces

AUV6703EPA

Extruded U-Nuts

21 Varieties

360 Pieces

AUV6708EPA

AUVECO 4 DRAWER RACK

Holds 4 large drawers (not included).

• 20” wide x 15 3/4” deep x 8” high

• 18” wide x 12” deep x 3” high for drawers

• Light green enamel finish

Part#

AUV2-96

Specialty Rivets

21 Varieties

360 Pieces

AUV6704EPA

Push-Type/

Screw-Type

Retainers

18 Varieties

285 Pieces

AUV6709EPA

Specialty & Tapping Screws

22 Varieties

700 Pieces

AUV6710EPA

Push-Type

Retainers #1

22 Varieties

360 Pieces

AUV6705EPA

Specialty Nuts

17 Varieties

335 Pieces

AUV6706EPA

Hood & Single

Head Retainers

22 Varieties

415 Pieces

AUV6711EPA

J &U Nuts

14 Varieties

440 Pieces

AUV6712EPA

ADDITIONAL ASSORTMENTS

9 additional metal drawer assortments are available in addition to the EPA Program.

Push-Type

Retainers #2

22 Varieties

230 Pieces

AUV6713EPA

Universal Retainers

22 Varieties

405 Pieces

Pushnut Retainers 21 Varieties

1000 Pieces AUV6714EPA

AUV6716EPA Foreign Splash Shield

18 Varieties

205 Pieces AUV6717EPA

Domestic Splash Shield #2

18 Varieties

310 Pieces

AUV6719EPA

Specialty Screws

17 Varieties

650 Pieces AUV6720EPA

Door, Rocker Panel & Weatherstrip

Retainers

18 Varieties

370 Pieces

AUV6715EPA

Domestic Splash Shield #1

18 Varieties

310 Pieces

AUV6718EPA

Tesla Retainers, Clips & Fasteners

16 Varieties

320 Pieces

AUV6721EPA

BOOTHS & ACCESSORIES

GFS ULTRA® XD PAINT BOOTH

The Ultra XD Paint Booth leads the industry in versatility and performance. With a choice of high-efficiency heat systems, intuitive control panels and downdraft or semi-downdraft airflow — along with superior lighting and contamination control — the Ultra XD will exceed any body shop’s expectations.

Feature

Description

Airflow Ultra XD Paint Booths come standard with GFS patented Controlled Airflow Ceiling (in downdraft models) or the HighPerformance Airflow Ceiling (in semi-downdraft models). Both ceilings allow for even distribution of air throughout the booth, providing excellent air filtration and precise contamination control.

Lighting

Designed for optimal brightness, Ultra XD spray booths feature four-tube sidewall light fixtures and either premium angled ceiling light fixtures (integrated into the Controlled Airflow Ceiling) or hip-style light fixtures (with the High-Performance Airflow Ceiling). All GFS light fixtures are ETL and ETL-C listed, and come complete with T8 ballasts and energy-efficient LED lamps.

Doors A three-wing, dual-skin product door — with three observation windows — and one personnel door come standard with each pre-engineered Ultra XD Booth. Doors feature heavy-duty hinges for long-lasting performance.

Energy Savings Shops can save up to 60 percent in electricity and 75 percent in fuel costs with economy mode, which automatically ramps the booth down and runs on idle when the booth is not in use. Providing further energy savings, SmartFlash on optional Logic controls allows up to 90 percent of the air to be recirculated during flash mode.

Controls The Ultra XD Paint Booth comes standard with an easy-to-use Engage control panel. A touch screen interface and enhancements such as improved temperature and pressure control and alarm tracking allow for better, more reliable booth performance. Upgrading to the LOGIC 3 or LOGIC 4 control panel provides additional functionality and user-programmable features such as SmartFlash and SmartCure profiles.

Construction Manufactured at their U.S. facility, Ultra XD spray booths are made with dual-skin, insulated, galvanized steel panels that are coated on both sides with a white, baked-on polyester topcoat, creating a rust-resistant cabin. Vertical wall panels reduce the number of joints and seams in the cabin’s construction, leaving you with a stronger, longer-lasting booth with a smooth fit and finish.

GFS ULTRA XL PAINT BOOTH

With a 12-foot-high ceiling designed for painting Sprinter vans, commercial vehicles and full-size pickup trucks, the Ultra XL Paint Booth from Global Finishing Solutions (GFS) brings the performance you expect from the Ultra Paint Booth line to an extended range of vehicle sizes and heights. With premium brightness, contamination control, energy efficiency and singleor dual-skin construction, the Ultra XL sprinter van paint booth is the perfect solution for oversized paint jobs.

Feature

Description

Airflow Exclusive to GFS, the Controlled Airflow Ceiling on the Ultra XL truck booth maximizes the effectiveness of downdraft airflow and increases the booth’s overall spray zone with a full-width ceiling plenum. The main airflow zone in the Controlled Airflow Ceiling creates a protective envelope of air around the vehicle, while secondary airflow zones protect booth walls from overspray and keep contaminants out of the paint job.

Lighting Ultra XL truck booths feature four-tube sidewall light fixtures and premium angled ceiling light fixtures, integrated into the Controlled Airflow Ceiling and located directly above the vehicle for optimal illumination. Light fixtures are ETL and ETL-C listed, and come complete with T8 ballasts and energy-efficient LED lamps.

Doors A four-wing, dual-skin product door — with four observation windows — and one personnel door come standard on the preengineered Ultra XL Paint Booth. Doors feature heavy-duty hinges for long-lasting performance.

Heater Offers the flexibility of choosing between two heat units – the GUL2000 or BT1200 heat system. Both heaters include dual VFDs and automatic pressure control.

Energy Savings Shops can save up to 60 percent in electricity and 75 percent in fuel costs with economy mode, which automatically ramps the Ultra XL Paint Booth down and runs on idle when the booth is not in use. Providing further energy savings, SmartFlash on optional LOGIC 3 or LOGIC 4 control panels allows up to 90 percent of the air to be recirculated during flash mode.

Construction Manufactured at their U.S. facility, Ultra XL oversized paint booths are made with dual-skin, insulated, galvanized steel panels that are coated on both sides with a white, baked-on polyester topcoat, creating a rust-resistant cabin. Vertical wall panels reduce the number of joints and seams in the cabin’s construction, leaving you with a stronger, longer-lasting booth with a smooth fit and finish.

BOOTHS & ACCESSORIES

GFS ULTRA XD MIX ROOM

Paint mixing rooms are used to control contamination and remove harmful fumes during the paint mixing process. Paint Mix Rooms are available in multiple configurations, and can be connected to paint booths for direct entry. All mix rooms feature a 4-inch, integrated spill containment for confining potential spills, eliminating the need for a curb.

Features

4” spill containment

White pre-coated galvanized steel

Dual-skin insulated panels

Personnel door with observation window

Exhaust blower with 1/2 hp motor (120V, 1-phase)

Light switch and fan disconnect

FILTERS FOR PAINT BOOTHS, OVENS, WASHERS, AND FINISHING EQUIPMENT

Extensive range of GFS and AFT filters are designed to meet the needs for different types of paint booths, ovens and equipment. Whether you are looking for high-quality intake filters, exhaust filters, wave filters, and many more we have you covered.

KLEAN STRIP MASK & PEEL SPRAY BOOTH COATING

Shields booth surface from overspray and makes cleanup fast and easy. Bright white for maximum booth visibility. Peelable coating for no-mess cleanup.

Applies easily, dries rapidly.

USC MAGIC MASK READY TO SPRAY MASKING LIQUID

A professional-quality masking liquid formulated to provide protection from paint overspray. Traps loose dust and dirt for a cleaner paint job and will eliminate the need for costly car covers, wheel covers and bulky plastic sheeting.

3M DUST CONTROL SPRAY

Water-based formula designed to attract and hold down dust commonly found on paint booth and body shop floors. Dust Control Spray makes pick-up with a mop or broom easy. It eliminates the need to use water to wash down floors.

GFS BOOTH SHIELD

WALL

Water based strippable coating used to protect spray booth surfaces from hazardous overspray. It is used as a temporary coating that is peeled off during booth maintenance.

3M BOOT COATING

Water-based solution for protecting paint booth walls from paint overspray. Dries to a clear film across fittings, walls and windows. The non-tacky formula won’t discolor from dust or dirt, and removes cleanly with water.

BOOTHS & ACCESSORIES

LIKE90 BOOTH COATINGTM

• Makes booth maintenance fast and easy

• Keeps booth in top condition

• Washes off easily with water

• Biodegradable and safe to sewer

• VOC: < 60 g/l

L9010018

L9010019 1 gallon 5 gallon

LIKE90 SEE THRUTM WASHABLE GLASS COATING

• Preserves booth lighting and visibility

• Crystal clear coating designed and just for glass

• Hand-washable/removable

• Biodegradable and safe to sewer

• VOC: < 60 g/l

L9010020 16 oz - aerosol

LIKE90 PARTICLE CONTROLTM BOOTH CONTAMINATION CONTROL

• Traps dirt on the floor and keeps it out of the paint

• Once-a-day application with standard pump sprayer

• Trapped contamination is easily removed from booth

• Increases shop throughput and reduces rework

• Reduce consumption of polishing compounds

• VOC: < 60 g/l

LIKE90 WHITE OUT® PEELABLE BOOTH COATING

• No or minimal prep before application

• Super long-lasting

• Overcoat between maintenance cycles

• Peels of easily in larges sheets

• Restores optimal lighting conditions in booth

• VOC: < 60 g/l

L9010032

L9010033 1 gallon 5 gallon

LIKE90 CLEAR VIEWTM PEELABLE GLASS COATING

• Preserves booth lighting and visibility

• Crystal clear coating designed just for glass

• Peels off easily in large sheets

• Ideal complement to White Out

• 1 quart covers a typical automotive booth’s glass

• VOC: < 60 g/l

3M DIRT TRAP PROTECTION MATERIAL

Specially engineered covering material protects and brightens paint booth walls and floors. Nonwoven construction traps dust and overspray and its bright white color creates better visibility for technicians. Low tack adhesive backing keeps it secure, smooth and wrinkle free.

Part# Size

MMM36852 28” x 300’ Roll

3M PROTECTION MATERIAL

MAGNETIC DISPENSER

Conveniently stores and dispenses any 28” wide surface protection material. Engineered with high strength magnets, secure the unit to a vertical metal surface to keep material off the floor and away from unwanted dust and debris. The metal dispenser is durable and easy to use, simply place it where desired and smoothly unroll the material.

3M DIRT TRAP CLEAR FILM

Specially engineered covering material that protects windows and other openings where paint or dust can accumulate, without blocking natural light. Material can also be used to cover openings, preventing drift of dust and overspray. Clear adhesive backing keeps it secure, smooth and wrinkle free, and removes without residue.

Part# Size

MMM36856 18” x 100’ Roll

3M SURFACE PROTECTION MATERIAL FLOOR APPLICATOR

Material rolls load quickly with simple clamp motion. Durable metal construction increases equipment life. Foam rollers hold protection material to the floor for smooth, wrinkle-free application.

*Protection material not included

BOOTHS & ACCESSORIES

Maintain the highest standards of quality and safety with our professional paint booth inspections. Our comprehensive evaluations cover ventilation, filtration systems, lighting, connections and many more to ensure your paint booth operates at peak performance. Regular inspections help prevent costly downtime, maintain compliance with industry regulations, and guarantee a pristine finish for every project.

INCLUDED IN A PAINT BOOTH INSPECTION

• All belts

• Door hinges

• Handles & locks

• All fans & blowers

• Light fixtures

• Booth gaskets

• Inspect & oil all motors

• Lubricate door hinges

• Inspect/tighten electrical

• Connections

• Burner system

• Exhaust stack

• Verify airflow balance

• Intake plenum

• Lubricate shaft bearings

• Door Seals

• Calibrate booth pressure gauge

• Service airflow switches

To schedule your inspection, contact your sales professional

• Dampers

• Pit & tunnel

• Booth air couplers

• Intake motor amps

• External motor amps

• Auxiliary amps