Oleo-Mac - Product Catalogue Consumer 2014

GB

Product Catalogue 2014

Symbols

Contents “EasyOn” User-friendly starting system ensures a smooth pick-up of the engine with no kickback, and limits the number of pulls required.

Trees and hedges

4

Chain saws and pruners

6

Hedgetrimmers

10

Power Sharp Practical system that enables the chain to be sharpened in just 5 seconds without the use of tools. Simply attach the sharpening stone device onto the guide bar and operate the chain saw at maximum speed, pressing hard against the device for several seconds.

Blower/Vacuum cleaners

12

The lawn

14

VibCut An antivibration system that isolates the engine from the handles and the body of the machine, considerably reducing the vibrations transmitted to the user during operation so as to guarantee maximum comfort and easy handling.

Multimate combined system

16

Brushcutters

22

Lawnmowers

28

Robotmowers

34

Scarifiers

36

Wheeled brushcutters/Flail mowers

38

Garden tractors

40

Protection of plants, hedges and lawns

44

Water pumps

46

Mistblowers

48

Sprayers

50

Other power equipment

52

High-pressure washers

54

Rotary tillers

56

Earth augers

58

Snow throwers

60

Transporters

62

Protective clothing

64

Accessories and spare parts

65

Service

66

Rev&Go Patented quick-fit mechanism for Multimate which enables the operator to switch from one implement to another within seconds, without the need for tools.

SRS Safety Release System Innovative quick release system allowing the operator to step away from the machine in an instant, for maximum protection and safety.

4-Stroke Four-stroke engines that reduce unburned hydrocarbon emissions by up to 85% and nitrogen oxide emissions by up to 65%. Tiltable through 360°, they run smoothly in any position.

Pluscut Multifunction lawnmowers with collection or mulching system (in mulching operation the grass cuttings are finely shredded and distributed over the lawn surface where they decompose rapidly to become an efficient natural fertiliser).

4-cutting device Versatile cutting system that includes mulching, collection and side discharge as standard, with optional deflector for rear discharge.

Deck Wash Quick-fit connector for washing the cutting deck after use. Convenient and practical, it helps keeps the deck in tip-top condition at all times.

Original accessories and spare parts Quality mark identifying original Emak parts and accessories. Designed to the most stringent quality standards, these items guarantee smoother operation of the machine and longer service life.

Product range Gardening, farming and forestry tools for home users and professionals. Emak covers all shades of green. With different models to meet each user’s needs but all sharing the same exceptional quality standards in terms of performance, reliability, comfort and safety.

Home-plus A range of machines aimed at the home user, for tidying and cleaning the garden, cutting hedges and small trunks or stems, and DIY jobs in general.

Characterized by lightweight and compact construction, to make the task of the operator that much simpler. Easy to start, easy to use, easy to maintain: these are the ideal tools for getting things done quickly and neatly around the home.

Tough-tech Solid and dependable, these are machines designed for heavy and frequent use in countryside environments: clearing overgrown and uncultivated areas, pruning and cutting firewood, crop irrigation and disinfestation tasks. Designed adopting solutions certain to ensure high work rates and maximum durability over time.

Sharp-pro No-nonsense everyday tools for the busy professional, these are machines that stand out for the toughness of their components, their high performance and their matchless long-term durability. Specific materials used in construction guarantee unwavering quality even when tackling the most severe and lengthy of tasks, like forestry work and the clearance of uncultivated areas or scrub and undergrowth.

Pruning trees The beauty of a garden is reflected primarily in the show of flourishing, healthy plants it contains. Be they evergreen or deciduous, fruit-bearing or ornamental, trees are a fundamental feature, whether of large landscaped areas and parks or small town gardens, as they generate perspective depth, create intimate and inviting corners, and give shade in summer. Trees and plants need to be tended carefully

Trees and hedges

and treated continuously: so here are a few thoughts on the more important operations involved in ensuring they are properly looked after.

Why, how and when to prune?

There are several reasons why trees and plants need pruning: to check excessive growth; to control the development of grafted plants (fruit-bearing or ornamental); to promote flowering or fruiting; to give new life to ageing or weakened plants; to clear away dead branches that have died off or are growing irregularly, and thus control the shape of the plant; to correct imbalances caused by previous pruning; and to favour the outcome of a transplantation, reducing leaf transpiration.

Pruning requires skill and patience; it is important to keep the harmony and growth of the tree in mind, avoiding injudicious

the type of plant – but equally, using the right technique: in effect,

and harmful actions such as indiscriminate cutting. Pruning must

the cut should be clean and made obliquely, near to a bud or a

be done at the proper time and in proper proportion – according to

knot, preferably on branches of smaller rather than large diameter.

Select the most suitable machine The use of suitable pruning equipment will help to ensure that plants grow in the proper way and make them easier to look after. Selection of the best tool is evaluated on the basis of individual needs and preferences, taking the advice of experts.

Pruning operations can be done using chain saws and pruners: the market offers a wide variety of chain saws to cater for the different requirements of users everywhere. Anyone with a small garden can use one of these machines simply for pruning the thicker branches of trees, but if there happens to be a fireplace in the home, a chainsaw will also be handy for chopping up logs. The same goes for pruners: small pruning chain saws that can be used to cut branches located high up and not easily accessible.

4

Growing and keeping a luxuriant hedge Before planting a hedge, care must be taken to plot the position of trees or shrubs so as to ensure compliance with legal constraints and with any pertinent local regulations.

The best time to plant a hedge is between the beginning of autumn and the beginning of spring. To cultivate a full hedge of the desired shape, the single bushes or shrubs must be planted close together, and it will be necessary to trim the topmost branches from the second year of growth

Care of hedges and collection of leaves

onwards, so as to encourage the growth of buds on the lower branches. To achieve satisfying results and work in

Hedges help to increase the amount of green that meets the

safety, these are jobs that need to be done using the right

eye. They have a significant influence on the personality of

machines. The hedgetrimmer is designed for accuracy; it

a garden, not least as they can be fashioned into attractive

offers the kind of clean and sharp cut needed in order to

and original shapes.

obtain the desired visual effect and safeguard the health of

Essential operations in any maintenance programme include

the plant.

periodic thinning out of unduly dense growth, so that air can circulate at the centre of the foliage and strengthen the base of the plant; also keeping the outer surface compact by frequently trimming new growth, being careful at the same time not to take too much off and open up unsightly and “holes� that can be harmful to the plant; and removing dry or damaged growth, especially in spring and autumn.

Cleaning up leaves and other debris Lawns and paths can be kept clear of leaves, twigs and all kinds of debris using blowers and vacuum cleaners, offered in hand-held and backpack versions.

From appliances available currently on the market, users can find the technological solution best able to meet their particular operating requirements. These are specificpurpose machines, easy to handle, that will get the job done simply, swiftly and quietly. Certain models of blower, generally with an internal combustion engine, can be converted easily to operate as vacuum cleaners by fitting a special collection kit, with a blade by which vacuumed material is chopped up to reduce the volume when inside the bag. They can also be equipped with anti-vibration systems that isolate the engine from the handgrips and the body of the machine, significantly reducing the level of vibration transmitted to the operator when in use.

5

Chain saws and pruners

A complete range of items for home and professional users alike. Tools for DIY projects, cutting up firewood, pruning, tree-felling.

Quality, dependable performance, simplicity of use and maintenance: winning features offered by a family of products designed with the practical needs of users in mind, and developed applying the very latest technological solutions.

Proper maintenance of chain saw and pruner After every 8-10 hours of operation, remove the cover and clean the air filter, replace if damaged or excessively soiled.

Check the condition of the fuel filter periodically.

Clean the cylinder fins periodically by brushing, or blasting with compressed air.

Inspect and clean the spark plug periodically.

Check the electrode gap periodically.

After every 30 hours of operation, remove the screw on the bevel drive and check the grease level (pruner).

Check and, if necessary, replace the chain safety stop (chain saw).

Turn the guide bar and make sure that the lubrication holes are free from impurities (chain saw).

Guide to chain saw and pruner selection For general tasks in and around the home, such as cutting up firewood, light pruning or small DIY building jobs, an electric chain saw is just the job. Rated from 1.5 to 2 kW, this machine is ideal for performing even the most demanding tasks quickly and comfortably.

For lopping and limbing, chopping down small plants and cutting up firewood, we recommend a lightweight machine of between 4 and 5 Kg with a displacement of between 35 and 45 cm³.

For intensive work requiring maximum reliability and consistent long-term performance, the best machines are professional chain saws, with over 50 cm³ displacement. Weighing just 5 to 10 Kg, they are ideal for felling and cutting up large trees.

For pruning jobs, the ideal machines are professional pruning chain saws, which provide the perfect blend of power, lightweight construction and easy handling. Equipped with a top handle, they are ideal for professional pruning operations and other precision work, such as grafting or surgery carried out on wounded or diseased plants.

For lopping and trimming overhead, or wherever there is uneven or sloping ground to contend with, a pruner is best. Thanks to a telescopic pole, cuts can be made up to 5 metres above ground, and therefore even on the highest branches. The saw itself is adjustable through intermediate angular settings from 0° to 90°.

6

Electric chain saws

GS 180 E Power Bar length

GS 200 E

1.8 kW

2.0 kW

35 cm / 14"

41 cm / 16"

4.4 Kg

4.4 Kg

Dry weight without bar and chain

GS 200 E

Universal chain saws for home use

Power Bar length Dry weight without bar and chain

GS 35

GS 35 C

GS 350

GS 350 C

2.0 HP - 1.5 kW

2.0 HP - 1.5 kW

35-41 cm

35-41 cm

4.4 Kg

4.4 Kg

Models GS 35 and GS 35 C available only in certain markets.

GS 350 C

Universal chain saws for intensive home use

Power Displacement Bar length Dry weight without bar and chain

937

941 C

941 CX

GS 370

GS 410 C

GS 410 CX

2.2 HP - 1.6 kW

2.5 HP - 1.8 kW

2.5 HP - 1.8 kW

3

35.2 cm

3

39.0 cm

39.0 cm3

35-41 cm

41 cm

41 cm

4.1 Kg

4.2 Kg

4.2 Kg

941 CX

Models 937, 941 C, and 941 CX available only in certain markets.

7

Chain saws for intensive use

GS 44

947

952

GS 440 Power Displacement Bar length Dry weight without bar and chain

GS 520

2.9 HP - 2.1 kW

3.1 HP - 2.3 kW 3

3.4 HP - 2.5 kW

45 cm

51.7 cm3

41-46 cm

41-46 cm

41-46 cm

4.3 Kg

4.9 Kg

5.0 Kg

42.9 cm

3

GS 440

models GS 44, 952 available in certain markets only.

Professional chain saws

956 Power Displacement Bar length Dry weight without bar and chain GS 820

“Heavy Duty” professional chain saw

GS 650 Power Displacement Bar length Dry weight without bar and chain

8

4.7 HP - 3.5 kW 63.4 cm³ 46-51-61-71 cm 6.3 Kg

962

4.1 HP - 3.1 kW

4.7 HP - 3.5 kW 3

GS 820

5.4 HP - 4.0 kW

6.0 HP - 4.4 kW

61.5 cm

70.8 cm

80.7 cm3

41-46-51 cm

46-51 cm

51-64-76 cm

51-64-76 cm

5.5 Kg

5.5 Kg

6.8 Kg

7.1 Kg

56.5 cm

3

GS 720

3

Professional pruning chain saws

GS 260

932 C

1.2 HP - 0.9 kW

1.6 HP - 1.2 kW

25.4 cm3

30.1 cm3

Bar length

25 cm

30-35 cm

Dry weight without bar and chain

2.8 Kg

3.4 Kg

GS 260 Power Displacement

932 C

Professional pruner

PPX 270 Power Displacement

1.3 HP 27.0 cm3

Bar/Chain

10”- 3/8” x .043”

Overall length of machine

2.60 m/3.80 m

Dry weight of complete tool without bar and chain

7.4 Kg

9

Hedgetrimmers

Suitable for topiary and general gardening; machines that do a perfect job, characterized by the cleanest of cutting actions.

These are machines featuring an excellent blend of power with ease of handling and operation: tools anyone can use, young or old, beginner or expert.

Quality blades are guaranteed to give a clean cut, indispensable both for the visual end result, and for the health of plants.

Sharpen the blade periodically with the special tool provided.

Clean the machine regularly with a soft brush or a cloth.

Periodically, inspect the air and fuel filter (models with petrol engine), and replace if necessary.

Proper maintenance of hedgetrimmer Check the condition of the blade. If excessive wear is evident, contact a service centre.

After each session, free the blade of any debris that has collected; when clean, spray the blade with a light coating of thin oil to prevent rust.

Clean the cylinder fins regularly, using a brush or compressed air (models with petrol engine).

Periodically, inspect the spark plug, check the electrode gap (0.5 mm) and verify the condition of the exhaust silencer (models with petrol engine).

Grease the speed reduction/drive mechanism every 20 working hours.

Guide to hedgetrimmer selection For tending and cutting hedges with small trunks located near to houses, even in spaces where access may be difficult, the best option is an electric model rated 600 or 700 Watts, guaranteeing agility, easy handling and minimal noise.

On the other hand, professional hedgetrimmers are just what you need to confidently tackle all types of hedge, no matter how tough or dense. Generally rated at over 600 Watt, they guarantee consistent long-term efficiency with maximum productivity and minimum effort.

Hedgetrimmer blades can have single or double cutting edges and are between 60 and 75 cm in length.

Optional features such as the primer ensure trouble-free ignition even at low temperatures. The dual safety switch and the shockproof material used in construction are designed to protect the user and safeguard the integrity of the machine. The handgrip turns through 180째 allowing operation even close to walls, with the machine held at an angle.

10

Electric hedgetrimmer for home use

HC 600 E Power

0.60 kW

Voltage

230 V

Blade type Blade length Weight

double 600 mm 3.9 Kg

Professional electric hedgetrimmer

HC 750 E Power

0.70 kW

Voltage

230 V

Blade type

double

Bar length

700 mm

Weight

4.3 Kg

Professional petrol hedgetrimmers

HC 265 XP

BC 240 H

HC 280 XP

HCS 280 XP

BC 240 H

Power

0.75 kW

0.75 kW

0.75 kW

0.9 kW

Displacement

21.7 cm³

21.7 cm³

21.7 cm³

21.7 cm³

Blade type

double

double

single

double blade, rotatable through 12 positions from 0° to 180°

Bar length

600 mm

750 mm

750 mm

500 mm

5.6 Kg

5.8 Kg

5.6 Kg

6.8 Kg

Weight

11

Blower/Vacuum cleaners

Powerful and efficient tools for clearing any surface of leaves, twigs and debris generally, whether for the home user or for the professional operating in public areas.

Special care has been taken over the design of devices designed to guarantee user comfort, also to ensure low noise operation and minimize environmental impact.

Proper maintenance of blower After every 10 hours operation, clean the air filter by shaking out thoroughly; replace if damaged or worn.

Check the condition of the fuel filter periodically; if soiled excessively, discard and fit a replacement.

Clean the cylinder fins regularly, using a brush or compressed air.

Periodically, clean the spark plug and check the electrode gap (0.5 mm).

Check the condition of the exhaust silencer; in the case of the 62 cm3 version, remove the flame-trap mesh from the silencer after every 30/40 hours operation and clean off carbon deposits.

Guide to blower selection For gardeners or home users who need to tidy up flowerbeds, walkways and greenery, the most suitable machines are handheld blowers with displacements ranging from 25 to 30 cm続.

Backpack blowers, with variable displacements from 30 to 70 cm続, are the better option for clearing much larger areas whether rural (such as hazel and chestnut groves, farmyards and forecourts) or urban (parks, stadia, flowerbeds and roads).

Certain models can be converted easily to operate as vacuum cleaners by fitting a special collection kit, with a blade that chops up vacuumed material to reduce its volume inside the bag. They can also be equipped with systems that significantly reduce the vibration transmitted to the operator when in use.

12

Handheld blowers

Power

BV 270

BV 300

1.2 HP - 0.9 kW

1.3 HP - 1.0 kW

Displacement Max. air volume

30.5 cm

3

30.5 cm3

3

3

11.6 m /min - 700 m /h

12.0 m /min - 720 m3/h

4.5 Kg

4.5 Kg

Dry weight, without blower tube

3

BV 300

5656 2001

5655 2001

36 L

36 L

Collection bag capacity

Backpack blowers

Power

BV 270 BP

BV 162

1.2 HP - 0.9 kW

4.5 HP - 3.3 kW

Displacement Max. air volume Dry weight, without blower tube

30.5 cm

61.3 cm3

3

12 m /min - 700 m /h

20 m /min - 1200 m3/h

6.4 Kg

9.4 Kg

3

3

3

BV 270 BP

13

The lawn

Looking after the lawn

Fertilization

A lush, green lawn is an object of desire for anyone who

The soil is not an inexhaustible reservoir of nutrients, and

has a garden. In effect, a healthy expanse of turf enhances

will be impoverished further by mowing: fertilizers are

the appearance of open spaces surrounding a home. Like

essential as a means of restoring nutrient substances to

plants and flowers, any lawn requires tending and treating

the soil. It is important to select products specifically for

continuously: and with a little effort, it can be kept in perfect

lawns, enabling a slow release of nitrogen and preferably

shape, year in and year out. So here is a quick guide to the

mineral-organic in formulation. The lawn should be fertilized

more important jobs that need doing through the course of

regularly all the year round, except in winter, selecting the

the year to ensure proper upkeep of the lawn.

products best suited to each respective period. Always keep to the dosages indicated, and be careful to spread the

Mowing Cutting the grass is not just an enjoyable pastime. It is also an operation absolutely essential to the health of the lawn:

product uniformly.

Controlling weeds and moss

mowing must be done at the right time, in the proper way

Weeds not only degrade the appearance of a lawn, they

and using suitable equipment. It is important to remember

also cause damage. The remedies to adopt will depend on

that mowing – which should wait until the winter is definitely

the type of weeds: having identified the problem, consult a

over – must be done frequently, to favour new growth:

specialist, who will be able to indicate the weedkillers best

every 10-15 days at first, then once a week or thereabouts

able to combat the situation. Moss grows on damp soils,

(right through the summer). For ornamental lawns, the height

wherever moisture tends to linger. The ideal solution would

of the grass should be, on average, about 3 cm in spring and

be to prevent its growth by digging and working peat or

autumn and 5 cm in summer.

silver sand into the soil before seeding, to create a soft and permeable bed. Where moss has taken hold, on the other

Watering It is important that the turf receives the right amount of moisture at all times during the year, as dictated by the weather conditions and the nature of the soil.

14

hand, the soil needs to be treated with suitable products, such as ferrous sulphate; having removed the dead moss, make holes in the soil, spread sand and peat, and apply a complex fertilizer to revive the turf.

Lawnmower, brushcutter or garden tractor?

There are three types of equipment offering a complete solution to the various needs encountered in the care of a lawn. In fact, the ability of the turf to flourish will depend not least on the machine used to cut the grass.

In practice, the use of the right appliance will make work in the garden more relaxing and pleasurable and bring better results. Here, we look at the best way to go about making a choice.

The brushcutter

Mulching In addition to the benefits for the lawn, mulching helps solve the problem of how to dispose of grass clippings, as these are simply chopped up finely and spread over the turf.

An essential item, on any surface near obstructions

What is mulching?

(low walls, fences, steps, etc.), or where the ground is

In the case of lawns, this is a technique whereby

uneven or on a steep gradient.

the grass clippings from mowing are used as

This machine is used to cut grass, weeds, brush and

nutrient for the turf. Thanks to the use of a special

scrub in areas not accessible with other machines.

blade and a plug that closes off the discharge

Certain brushcutters, when fitted with particular

duct, grass clippings continue to circulate

accessories, can also be used for pruning high and

beneath the mower deck when cut. The particles

low growth on trees and orchard plants, for clipping

are chopped finer and finer, and spread uniformly

medium-high hedges and for cultivating small

over the lawn, decomposing ultimately and

vegetable plots.

acting as a natural fertilizer.

With mulching, the lawn benefits from an

The lawnmower Lawnmowers are adaptable to different types of surface. Simply select the most suitable type from the models available: models for hobbyists (small lawns,

invaluable application of organic and nutritional substances – also of moisture, to prevent it from drying out – and, last but not least, there are no waste disposal problems.

gardens), and models for professionals, indispensable when working large areas and on irregular lawns with depressions or ridges. Some models are selfpropelling, which makes for greater operator comfort when mowing large expanses, and working on slopes or slightly uneven soils.

If the lawnmower is equipped with a mulching kit, the need to dispose of clippings is largely eliminated, since these are finely fragmented and strewn on the turf, retaining moisture and essential nutrients.

The garden tractor These offer the ideal solution for large gardens, and for parkland and public green spaces. Sturdily built and easy to handle, machines of this type have a small turning circle to simplify manoeuvres in amongst plants and shrubs. They generally have a side or rear outlet duct for connection to a grass catcher. Like lawnmowers, certain models of garden tractor can be converted by means of a simple kit to operate in mulching mode.

15

Multimate combined system 16

Multimate is the all-in-one tool that makes gardening 7 times more efficient. At its centre is one big heart: a compact, lightweight and quiet engine which can power up to 7 different implements. Ideal for keen gardeners with diverse needs: finishing the lawn edges and around walls and fences, pruning trees and hedges, trimming bushes, and blowing away leaves and debris. No matter what the needs of the private user, one big heart takes care of them all.

The all-in-one tool for your garden: it offers all the implements you need to look after every inch of your garden.

Simple changeover action: just press a button and rotate to switch between the 7 implements supplied with Multimate.

A single engine body, quiet yet powerful: lightweight, quiet and incorporating an ergonomic handgrip, with all controls at your fingertips for maximum comfort.

7 machines for the price of one – invaluable.

Minimal space requirements: Multimate takes up minimal room and is also supplied with a special implement storage kit.

Multimate - Quick-fit lock-release system Multimate is based on a highly intuitive lock-release system which is so user-friendly and safe that it can be operated by even the least expert users.

Multimate features the patented Rev&Go system, a quick-fit mechanism which enables the operator to switch from one implement to another within seconds and without the need for tools: simply insert an implement and rotate to attach it, or press a button and rotate to release it.

From one implement to the next in just 5 seconds Attachment procedure

Silver Medal Innovation Demopark (Germany)

for at 2009

Release procedure

Multimate - Engine unit Quiet, powerful and eco-friendly, the single 2-stroke engine features an innovative 3-spring anti-vibration system which completely isolates it from the handgrip: this is the revolutionary heart of Multimate!

Engine

30 cm3 EURO 2

Engine

30 cm3 EURO 2

Power

1.0 HP

Primer

for introducing fuel into the carburettor and guaranteeing simple starting every time

Filter

foam air filter which guarantees an optimum filtering action and long cleaning intervals

Digital coil Anti-vibration system

to reduce effort during start-up and limit fuel consumption with 3 springs

Fuel tank capacity

0.37 L

Implement fitting

2 positions (0째 and 90째)

Weight

3.9 Kg

17

Multimate – Brushcutter The ideal tool for cutting grass, weeds, bushes and shrubs in areas not accessible with other machines. Essential both for cleaning and tidying private premises, and for clearing areas overgrown with untended vegetation.

Shaft arm tube

Ø 22 mm (internal drive shaft Ø 6 mm)

Cutting components

Ø 109 Tap'n Go head, 2.0 mm line

Weight

18

Ø 22 mm (internal drive shaft Ø 6 mm)

Shaft arm tube

2.3 Kg

Multimate – Trimmer The perfect implement for tending to less accessible corners of the garden, even those with obstacles.

Shaft arm tube

Ø 22 mm (internal drive shaft Ø 6 mm)

Shaft arm tube

Ø 22 mm (internal drive shaft Ø 6 mm)

Cutting components

Ø 105 Tap'n Go head, 2.0 mm line

Weight

1.9 Kg

Multimate - Lawn Edger Practical and lightweight implement designed for trimming and tidying lawn edges along paths and flower beds; the vertical cutting action enables it to accurately follow the contours of the lawn, tidying borders that other machines such as brushcutters and lawnmowers are unable to reach.

Shaft

Ø 22 mm (internal drive shaft Ø 6 mm)

Cutting components

blade Ø 8”/200 mm, thickness 2 mm

Blade guard

plastic

Depth of cut

50 mm

Wheel

plastic (Ø 135 mm)

Weight

2.8 Kg

19

Multimate – Blower Practical and manoeuvrable, this implement is ideal for trouble-free removal of leaves, shrubs and garden debris. Particular attention paid to enhancing the comfort of the end user.

Air flow rate

Air flow rate Air speed

600 m3/h

600 m3/h 60 m/s

Handle

swivelling

Weight

1.6 Kg

Multimate – Hedgetrimmer The 1.1 metre shaft enables the operator to trim hedges up to 3 metres high, without the use of a ladder. Twelve different blade settings.

Gearbox

in aluminium

Cutting action

reciprocating

Blade length

510 mm

Cutting width

25 mm

Cutting height Blades

20

3 metres approx. adjustable through 12 positions from 0 to 135°

Blade pitch

30 mm

Weight

2.6 Kg

Multimate – Pruner For pruning all kinds of tree branches and foliage up to three metres from the ground, to keep growth under control.

Shaft arm length Bar length Chain

1.5 m 10” (250 mm) Oregon 3/8” x .043”

Chain thickness

1.1 mm

Oil reservoir capacity

0.165 L

Weight

2.4 Kg

Multimate - Tiller Versatile implement which can be used for preparing soil for grass seeding, as well as digging furrows for planting flowers, shrubs and vegetables. Its versatility means that it can also be used for turf scarification.

Rotor Rotor guard Gearbox Transmission

2+2 blades - 30 cm plastic 1 forward speed in aluminium

Handlebars

folding

Weight

9.4 Kg

21

Brushcutters

Essential both for cleaning and tidying private premises, and for clearing areas overgrown with untended vegetation.

This is a family of products characterized by top-of-the-range performance and supreme operator comfort, not to mention maximum care for the environment guaranteed by new engines producing low emissions.

Inspect the fuel filter periodically, replace if damaged or excessively soiled.

Clean the cylinder fins by brushing, or blasting with compressed air.

Clean the spark plug periodically and check the electrode gap.

Check the grease level on the bevel drive after every 30 hours of use.

Grease the end of the flexible pipe after every 20 hours

Proper maintenance of brushcutter

of use, and the joint of the rigid pipe (backpack models) after every 100 hours.

Clean the machine and the cutter assembly at the end of

Clean the air filter after every 8-10 hours of operation, replace if excessively soiled or damaged.

every job.

Sharpen the blade periodically.

Guide to brushcutter or trimmer selection The best machines for relatively small areas are electric trimmers. Generally rated between 500 and 1000 Watt, they are ideal for trimming jobs on small, level areas with obstacles.

On more or less level surfaces near obstructions, brushcutters are the better option. For grass cutting and trimming jobs, a brushcutter of between 25 and 40 cm続 displacement will be enough; more demanding tasks on uneven ground should be performed using more powerful brushcutters of between 40 and 60 cm続 displacement.

For performing jobs on surfaces with particularly accentuated height differences, or among reeds and thicker undergrowth, or if conditions are rendered generally more difficult by obstacles, sloping ground or the intensity of use, backpack models of 40 and 60 cm続 displacement are preferable.

22

Electric trimmers

TR 91 E

TR 61 E

TR 91 E

TR 101 E

Power

600 W

850 W

1000 W

Grip

single

single

single

Weight

3.2 Kg

3.5 Kg

4.5 Kg

SPARTA universal brushcutters for home use

SPARTA 25 SPARTA 250 TR

SPARTA 250 S

SPARTA 250 T

1.0 HP - 0.8 kW

1.0 HP - 0.8 kW

1.0 HP - 0.8 kW

25.4 cm3

25.4 cm3

25.4 cm3

Grip

single

single

handlebar

Weight

4.5 Kg

5.6 Kg

6.2 Kg

Power Displacement

SPARTA 25 model available only in certain markets.

SPARTA 250 S

SPARTA brushcutters for intensive use

SPARTA 38

Power SPARTA 380 S

SPARTA 380 S

SPARTA 380 T

1.8 HP - 1.3 kW

1.8 HP - 1.3 kW

36.2 cm

36.2 cm3

Grip

single

handlebar

Weight

6.8 Kg

7.3 Kg

Displacement

3

SPARTA 38 model available only in certain markets.

23

SPARTA “Heavy Duty” brushcutters for intensive use

SPARTA 44

SPARTA 42 BP

SPARTA 440 S

SPARTA 440 T

2.1 HP - 1.6 kW

2.1 HP - 1.6 kW

2.1 HP - 1.6 kW

40.2 cm3

40.2 cm3

40.2 cm3

Grip

single

handlebar

single

Weight

6.9 Kg

7.4 Kg

9.5 Kg

Power Displacement

SPARTA 44 model available only in certain markets.

SPARTA 440 S

PREMIUM universal brushcutters for home use

BC 220 T

Power Displacement

BC 22 S

BC 22 T

BC 24 S

BC 24 T

BC 220 S

BC 220 T

BC 240 S

BC 240 T

1.1 HP - 0.8 kW

1.1 HP - 0.8 kW

1.2 HP - 0.9 kW

1.2 HP - 0.9 kW

21.7 cm

3

3

21.7 cm

21.7 cm

21.7 cm3

Grip

single

handlebar

single

handlebar

Weight

4.2 Kg

4.8 Kg

4.5 Kg

5.2 Kg

models BC 22, BC 24 available in certain markets only.

24

3

PREMIUM “Split Shaft” universal brushcutters for home use

BC 240 D Power Displacement

Hedgetrimmers

Pruner

Blower

Shaft extension

1.2 HP - 0.9 kW 21.7 cm3

Grip

single

Weight

5.1 Kg

PREMIUM universal brushcutters for intensive home use

BC 280 S

BC 280 T

1.3 HP - 1.0 kW

1.3 HP - 1.0 kW

27 cm3

27 cm3

Grip

single

handlebar

Weight

5.5 Kg

6.0 Kg

Power BC 280 S

Displacement

25

PREMIUM brushcutters for intensive use

BC 320 S

BC 320 T

BC 350 S

BC 350 T

1.5 HP - 1.1 kW

1.5 HP - 1.1 kW

1.9 HP - 1.4 kW

1.9 HP - 1.4 kW

30 cm3

30 cm3

36.3 cm3

36.3 cm3

Grip

single

handlebar

single

handlebar

Weight

5.8 Kg

6.3 Kg

6.9 Kg

7.6 Kg

Power Displacement

BC 350 T

Power Displacement

BC 380 S

BC 380 T

1.9 HP - 1.4 kW

1.9 HP - 1.4 kW

36.3 cm

3

36.3 cm3

Grip

single

handlebar

Weight

7.2 Kg

7.8 Kg

PREMIUM professional brushcutters

BC 430 S

Power

753 S

BC 430 TL

2.5 HP - 1.83 kW

2.5 HP - 1.83 kW

Displacement

44 cm続

44 cm続

Grip

single

handlebar

Weight

7.7 Kg

8.5 Kg

746 S

746 T

753 S

753 T

755 MASTER

2.5 HP - 1.8 kW

2.5 HP - 1.8 kW

2.8 HP - 2.1 kW

2.8 HP - 2.1 kW

2.8 HP - 2.1 kW

45.7 cm3

45.7 cm3

52.5 cm3

52.5 cm3

52.5 cm3

Grip

single

handlebar

single

handlebar

handlebar

Weight

7.5 Kg

8.1 Kg

7.4 Kg

8.2 Kg

8.5 Kg

Power Displacement

26

BC 430 S

PREMIUM professional backpack brushcutters

BCF 430

Power Displacement

BCF 430

446 BP ERGO

453 BP ERGO

2.5 HP - 1.83 kW

2.5 HP - 1.8 kW

2.8 HP - 2.1 kW

45.7 cm

52.5 cm3

3

44 cm

3

Grip

single

single

single

Weight

9.4 Kg

10.8 Kg

11.0 Kg

Brushcutters with 4-stroke engine

BC 360 4S

BC 360 4T

35.8 cm3

35.8 cm3

Grip

single

handlebar

Weight

6.7 Kg

7.0 Kg

Displacement

BC 360 4S

Additional tools for brushcutters

EP 90

EH 24 - EH 25

EP 100

EH 48 - EH 50 - EHD 50

EP 120

CULTIVATOR

27

Lawnmowers

An extensive range of lawn care solutions. Small gardens or large parks; machines for occasional users and for professional contractors and groundsmen.

All models are designed taking account of their typical operating environment, and of customer preferences with regard to use and maintenance.

A wide and diversified offering able to meet a variety of needs with innovative and hi-tech solutions.

Proper maintenance of lawnmower Periodically, check the oil level and the fuel level (models with petrol engine).

Make certain that the cutting area (under the deck), the grass catcher, and the machine in general, are cleaned regularly and thoroughly.

Check the sharpness of the blade periodically.

Inspect and clean the air filter periodically.

Check the engine oil periodically and renew if necessary, inspect the drive belts and pulley of the transmission system, clean the variable speed unit thoroughly, and inspect the wheel bearings, lubricating if necessary.

Guide to lawnmower selection For gardens spanning up to 900 m², the best option is an electric lawnmower, with plastic or steel deck.

Equipped with an electric motor, these machines are ideal due to their compact size and manoeuvrability, with a cutting width that generally ranges between 30 and 50 cm.

For larger expanses of up to 2000 m², models with cutting width of 40 to 55 cm are more suitable.

Comprising a robust structure with steel deck, they are available in the push-type and self-propelled versions. For areas exceeding 1200 m² the best option is a self-propelled model, which will reduce the effort needed when working on uneven or sloping ground.

The ideal machines for big gardens (between 2000 and 2600 m²) are self-propelled professional models. Offering a cutting width of 40 to 55 cm, they combine the advantages of tough construction materials (aluminium deck) with dependable performance, in terms of optimum work rate and shorter job times.

28

300-550 m2

Electric lawnmowers with plastic deck

K 35 P

K 40 P

Deck

ABS

ABS

Power

1.1 kW

1.3 kW

Cutting width

33 cm

38 cm

Propulsion

push

push

Grass box capacity

25 L

40 L

K 40 P

ESSENTIAL electric lawnmowers with steel deck

600-800 m2

G 44 PE

G 48 PE

Deck

steel

steel

Power

1.5 kW

1.6 kW

Cutting width

41 cm

46 cm

Propulsion

push

push

Grass box capacity

60 L

60 L

G 48 PE

29

ESSENTIAL push-type lawnmowers with steel deck

G 44 PK Deck Displacement Engine make/model

G 44 P

800-1400 m2

G 48 PK

steel

steel

steel

140 cm3

125 cm3

140 cm3

Emak K 500 OHV

B&S 450 E series

Emak K 500 OHV

Cutting width

41 cm

41 cm

46 cm

Propulsion

push

push

push

Grass box capacity

60 L

60 L

60 L G 48 PK

ESSENTIAL self-propelled lawnmowers with steel deck

1000-1800 m2

G 44 TK Deck Displacement Engine make/model Cutting width

G 48 TK

30

G 48 TK

steel

steel

140 cm3

140 cm3

Emak K 500 OHV

Emak K 600 OHV

41 cm

46 cm

Propulsion (speed)

self-propelled (3.6 Km/h)

self-propelled (3.6 Km/h)

Grass box capacity

60 L

60 L

COMFORT PLUS push-type lawnmowers with steel deck

G 44 PK COMFORT PLUS Deck Displacement Engine make/model

800-1400 m2

G 44 PB COMFORT PLUS

G 48 PK COMFORT PLUS

G 48 PBQ COMFORT PLUS

steel

steel

steel

steel

140 cm3

125 cm3

140 cm3

140 cm3

Emak K 500 OHV

B&S 450 E series

Emak K 500 OHV

B&S 550 E series

Cutting width

41 cm

41 cm

46 cm

46 cm

Propulsion

push

push

push

push

Grass box capacity

70 L

70 L

70 L

70 L

G 48 PK COMFORT PLUS

COMFORT PLUS self-propelled lawnmowers with steel deck

G 48 TBQ COMFORT PLUS

G 48 TBX COMFORT PLUS Deck

1400-2000 m2

G 48 TBX COMFORT PLUS

G 53 TBX COMFORT PLUS

steel

steel

steel

140 cm3

190 cm3

190 cm3

B&S 550 E series

B&S 625 series

B&S 625 series

46 cm

46 cm

51 cm

Propulsion (speed)

self-propelled (3.6 Km/h)

self-propelled (3.6 Km/h)

self-propelled (3.6 Km/h)

Grass box capacity

70 L

70 L

70 L

Displacement Engine make/model Cutting width

31

1400-2000 m2

ALLROAD PLUS 4 self-propelled lawnmowers with steel deck

G 48 TK ALLROAD PLUS 4

G 48 TBR ALLROAD PLUS 4

G 53 TBX ALLROAD PLUS 4 Deck Displacement Engine make/model Cutting width

G 53 TBX ALLROAD PLUS 4 Deck

steel

steel

159 cm3

140 cm3

Emak K 650 OHV

B&S 575 EX series

46 cm

46 cm

Propulsion (speed)

self-propelled (3.6 Km/h)

self-propelled (3.6 Km/h)

Grass box capacity

70 L

70 L

G 53 THX ALLROAD PLUS 4

G 53 VBD ALLROAD PLUS 4

G 53 TK ALLROAD PLUS 4

steel

steel

steel

steel

190 cm3

196 cm3

160 cm3

160 cm3

B&S 625 series

Emak K 800 OHV

Honda GCV 160

B&S 750 series

51 cm

51 cm

51 cm

51 cm

Propulsion (speed)

self-propelled (3.6 Km/h)

self-propelled (3.6 Km/h)

self-propelled (3.6 Km/h)

self-propelled, variable speed drive (from 2.5 to 4.5 Km/h)

Grass box capacity

70 L

70 L

70 L

70 L

Displacement Engine make/model Cutting width

1400-2000 m2

ALLROAD EXA 4 self-propelled lawnmowers with steel deck G 48 TBX ALLROAD EXA 4 Deck Displacement Engine make/model Cutting width G 53 TK ALLROAD EXA 4

steel

steel

190 cm続

159 cm続

B&S 625 series

Emak K 650 OHV

46 cm

46 cm

Propulsion (speed)

self-propelled (3.6 Km/h)

self-propelled (3.6 Km/h)

Grass box capacity

70 L

70 L

G 53 TK ALLROAD EXA 4

G 53 TBX ALLROAD EXA 4

Deck Displacement Engine make/model

steel

steel

196 cm続

190 cm続

Emak K 800 OHV

B&S 650 series

51 cm

51 cm

Propulsion (speed)

self-propelled (3.6 Km/h)

self-propelled (3.6 Km/h)

Grass box capacity

70 L

70 L

Cutting width

32

G 48 TK ALLROAD EXA 4

ALLROAD ALUMINIUM self-propelled lawnmowers with aluminium deck

2000-2400 m2

MAX 53 TBX ALLROAD ALUMINIUM

Deck Displacement Engine make/model Cutting width

MAX 48 TK ALLROAD ALUMINIUM

MAX 48 TBX ALLROAD ALUMINIUM

aluminium

aluminium

159 cm3

190 cm3

Emak K 650 OHV

B&S 650 series

46 cm

46 cm

Propulsion (speed)

self-propelled (3.6 Km/h)

self-propelled (3.6 Km/h)

Grass box capacity

80 L

80 L

MAX 53 TK ALLROAD ALUMINIUM

MAX 53 TBX ALLROAD ALUMINIUM

MAX 53 VBD ALLROAD ALUMINIUM

MAX 53 THX ALLROAD ALUMINIUM

aluminium

aluminium

aluminium

aluminium

196 cm3

190 cm3

160 cm3

160 cm3

Emak K 800 OHV

B&S 675 series

B&S 750 series

Honda GCV 160

51 cm

51 cm

51 cm

51 cm

Propulsion (speed)

self-propelled (3.6 Km/h)

self-propelled (3.6 Km/h)

self-propelled, variable speed drive (from 2.5 to 4.5 Km/h)

self-propelled (3.6 Km/h)

Grass box capacity

80 L

80 L

80 L

80 L

Deck Displacement Engine make/model Cutting width

2300-2600 m2

LUX 55 professional lawnmowers with aluminium deck

Deck Displacement Engine make/model Cutting width

LUX 55 TBD

LUX 55 TBI

LUX 55 HXF

aluminium

aluminium

aluminium

160 cm3

190 cm3

163 cm3

B&S 750 series

B&S 850 series

Honda GXV 160

53 cm

53 cm

53 cm

Propulsion (speed)

self-propelled (3.6 Km/h)

3 speeds

3 speeds

Grass box capacity

80 L

80 L

80 L

LUX 55 TBI

33

Robotmowers

Robotmowers are an innovative lawn care solution that dispense with the need to cut the grass, leaving the lawn constantly perfectly manicured while also dispensing with the need to dispose of grass cuttings. Completely independent operation: when the robotmowers need to recharge they return automatically to the charging station; power consumption is negligible, with zero CO2 emissions.

No noise disturbance in the garden and neighbourhood. Available in a comprehensive range of three models for lawn sizes of up to 2,000 m2.

Once a week check the blades for damage and sharpen

them every 3-4 weeks. Change the blades every 6 months

or sooner if they show evident signs of deterioration.

Once a week clean the area around the wheels carefully using a brush or a cloth, and ensure the wheels spin

freely; make sure the front wheels are able to steer without

obstructions.

Inspect the electrical contact surfaces for signs of dirt or

Proper maintenance of robotmower

burns (incorrect charging).

Periodically inspect the contacts on the charging

Clean the robot carefully twice a month with a brush or

station to ensure they are in good condition. The contacts

cloth; use water if necessary for more thorough cleaning.

must be replaced on the charging station and on the robot if

Clean the underside of the deck once a month.

they show evident signs of burning.

Guide to robotmower selection ORION is the ideal machine for homeowners with lawns of up to 2,000 m² in size. Optimal cutting results are guaranteed even in the presence of a large number of obstacles and highly irregularly shaped lawn surfaces.

If the lawn has a particularly complex layout we recommend model 1200 or 2000 which can work simultaneously with two charging stations, to be installed at opposite ends of the garden.

For larger lawns choose model 2000, which combines longer working time with the facility for electrically controlled cutting height adjustment directly from the display, thus making it possible to optimize cutting performance.

34

A perfect lawn in a few simple steps.

Once-only preparation in a few simple steps: • Install the charging station • Install the boundary cable in the lawn using the supplied staples • Calibrate ORION • Set the operating times • ORION is ready for use Programming, first-time operation: • Position ORION next to the charging station and switch it on • Enter the PIN code • Press the HOME button to test the charging station (except model 700) • Start the calibration procedure and set the days and times of operation • Switch the rain sensor on or off (except model 700) Boundary cut function Thanks to this function ORION cuts the grass along the perimeter wire in the preset boundary area. The day and time of this function can be freely programmed.

Robotmowers for home use

< 700 m2

< 1200 m2

< 2000 m2

ORION 700

ORION 1200

ORION 2000

Li-Ion (1.5 Ah/ 18 V)

Li-Ion (3 Ah/ 25.2 V)

* Li-Ion (4.4 Ah/ 25.2 V)

70 min

120 min

120 min

70 min

120 min

Cutting system motor speed

3,400 rpm

3,400 rpm

3,400 rpm

Guaranteed sound power level

65 dB (A)

65 dB (A)

65 dB (A)

Surface area / max. gradient

max 700 m² / 35 %

max 1200 m² / 35 %

max 2000 m² / 35 %

30 - 60 mm

30 - 60 mm, manual

30 - 60 mm, electronic

28 cm

30 cm

32 cm

600 x 490 x 245 mm

600 x 490 x 245 mm

702 x 547 x 290 mm

7.7 kg

8.0 kg

11.5 kg

Battery Charging time Operating time

ORION 1200

Cutting height Cutting diameter Dimensions (length x width x height) Weight

120 min

* available from autumn 2014.

35

Designed for discerning users, professional gardeners and groundsmen, these tools are used in conjunction with lawnmowers and are ideal for keeping the lawn healthy by eliminating moss and thatch.

Proper maintenance of scarifier Check the state of the blades before every use, sharpen or replace as necessary.

Clean the machine immediately after each use.

Empty and clean the collection bag.

Scarifiers

Clean the bottom of the equipment, as well as the roller or scarifier.

Remove all dirt using a rag or brush.

Do not clean the machine with running water or high pressure washers.

Guide to scarifier selection Used for removing thatch and moss from the lawn surface, they are equipped with a robust structure and powerful engine, to take on even the toughest of terrains. Lawns should be scarified at least twice a year, as this will aerate the soil and enable moisture, air and nutrients to reach the roots of the grass, favouring steady and healthy growth.

An important feature to look out for is the height adjustment system with memory, which ensures that the machine can be set down at the same height when repositioned. Generally available with a cutting width of between 40 and 50 cm. Models equipped with bearing-mounted wheels ensure excellent propulsion, whatever the type of surface.

36

> 2000 m2

Professional scarifiers

Deck Displacement Engine make/model Cutting width Spike Wheels Cutting depth Overall dimensions Weight

SR 40 S50

SR 50 H60

steel

steel 3

160 cm

160 cm3

Subaru EP16 OHC

Honda GX 160

40 cm

50 cm

fixed

floating

plastic

metal with bearings

adjustable with memory

adjustable with memory

120x68x90 cm

120x82x102 cm

50 Kg

65 Kg

SR 40 S50

37

Wheeled brushcutters/Flail mowers

A range of products designed for discerning home users, produce growers and landscape maintenance contractors. Ideal for cutting down and removing long, thick grass, they are distinguished by their extremely robust design, cutting power and comfortable operation, which enables the user to get the job done quickly and efficiently.

After each use clean the cutter assembly housing and clear the engine of any residual vegetation.

Regularly check that the cutting blade is sharp, so to obtain the cleanest possible cut.

Replace the gasket of the blade brake after every 100

Proper maintenance of wheeled brushcutter/flail mower

hours of use.

Lubricate the bearings, axles, front/rear wheels and chain after every 25 hours of use.

Before each use ensure that the cooling intake area and the engine cylinder are free from dirt.

Check the oil level after every 100 hours (minimum).

Sharpen and balance the blade after every 20 hours of use.

Guide to wheeled brushcutter/flail mower selection Home users can choose from semi-professional models, which are extremely robust but also compact and easy to handle. Equipped with centralised cutting adjustment, they are ideal for cleaning mediumsized areas infested with weeds, scrub or other types of invasive vegetation.

For more demanding and continuous work, such as that performed by farmers or professional contractors, a professional model is needed. Equipped with professional blade (wheeled brushcutter) and professional cutting unit (flail mower), they assure excellent chopping quality, even on dense undergrowth and medium-sized shrubs.

38

> 5000 m2

Wheeled brushcutters for home use

WB 51 S6

Displacement Engine make/model

WB 51 S6

WB 51 VB6

189 cm3

190 cm3

Subaru EA190 V

B&S 825 OHV series

Cutting width

51 cm

51 cm

Transmission

single speed propulsion

variable speed drive

central (controlled from handgrip)

central (controlled from handgrip)

57 Kg

62 Kg

Cutting height adjustment Weight

> 5000 m2

Professional wheeled brushcutter

WB 52 VBR6 Displacement Engine make/model

190 cm3 B&S 825 OHV series

Cutting width

52 cm

Transmission

2 forward speeds + 1 reverse

Cutting height adjustment Weight

flange-operated 82 Kg

> 3000 m2

Flail mower for home use

WB 55 H 6,5 Displacement Engine make/model

196 cm3 Honda GX 200

Cutting width

50 cm - 26 blades

Transmission

single speed propulsion

Cutting height adjustment

centralised (20 - 80 mm)

Weight

125 Kg

> 5000 m2

Professional flail mowers

Displacement Engine make/model

WB 65 HR 8,5

WB 80 KR 11

270 cm3

277 cm3

Honda GX 270

Kohler CH 395

Cutting width

65 cm - 38 blades

80 cm - 46 blades

Transmission

3 forward speeds + reverse

3 forward speeds + reverse

centralised (20 - 80 mm)

centralised (20 - 80 mm)

155 Kg

170 Kg

Cutting height adjustment Weight

WB 80 KR 11

39

Garden tractors

Ideal for gardens of all shapes and sizes, parkland and public green spaces.

Tough and easy handling, these are the perfect machines for anyone interested in high work rates.

Incorporating the latest solutions technology has to offer, they give maximum satisfaction in terms of comfort and performance, even to the most demanding of users.

Proper maintenance of garden tractor After every 25 hours operation, check that the blade is fastened securely, and sharp.

Every 20 hours, check the adjustment of the propulsion brake, the state of the drive belts and the condition of the blade clutch: if worn, contact a service centre.

Make a periodic inspection of all mechanical fastenings and general lubrication.

Check the level of the oil, replacing after the first 10 hours operation and every 50 hours thereafter.

Inspect the air filter and fuel filter, and replace if clogged excessively.

Check the pressure of the tyres.

Guide to garden tractor selection Garden tractors with side discharge (for areas up to 6.000 m²): these are small and compact models with a tight turning radius, suitable for manoeuvring in confined spaces. They can be converted to operate in mulching mode.

Garden tractors with rear discharge for small and medium-sized areas (up to 3.000 m²): known as ride-on tractors (engine under driver seat), rated up to 13 HP. Compact and neatly proportioned, these machines afford ease of manoeuvre in gardens with a high density of plants, where grass clippings need to be collected. They can be converted to operate in mulching mode.

Garden tractors with rear discharge for medium-sized areas (up to 4.000 m²): fitted with medium-large cutter assemblies (84/92 cm), they combine strength with manoeuvrability and are ideal for frequent use in the garden, where grass clippings need to be collected. Available with mechanical or hydrostatic transmission which allows the operator to control direction and speed by means of a single pedal.

Garden tractors with rear discharge for larger areas (up to 7.000 m²): fitted with large cutter assembly (102 cm), designed for maintenance of large gardens where grass clippings need to be collected. Available with hydrostatic transmission which allows the operator to control direction and speed by means of a single pedal.

Professional garden tractors with rear discharge for large areas (up to 9.000 m²): fitted with large cutter assembly (102 /122 cm), designed for maintenance of large gardens, parks and public green spaces where grass clippings need to be collected. Available with hydrostatic transmission which allows the operator to control direction and speed by means of a single pedal.

Professional all-terrain garden tractors (for areas up to 10.000 m²): with 92 and 110 cm cutting attachment, designed for clearing and tidying areas overgrown with thick vegetation, on uneven terrain and on sloping ground where there is no need for clippings to be collected. With hydrostatic transmission, which allows the operator to control direction and speed by means of a single pedal, and with self-locking differential.

40

Side-discharge garden tractors

> 3000 m2

Displacement OM 108 L/18,5 H

Engine make/model Cutting width Propulsion Weight

4-in-1 garden tractor for small and medium-sized areas

OM 98 L/14,5 K H

OM 108 L/18,5 H

432 cm3

500 cm3

Emak K 1450 AVD

B&S Powerbuilt 4185 AVS series

98 cm

108 cm

hydrostatic

hydrostatic

160 Kg

171 Kg

> 4000 m2

MISTRAL 72/13 H Displacement Engine make/model Cutting width Propulsion Bag Capacity

344 cm3 B&S Powerbuilt 3130 AVS series 72 cm hydrostatic 180 L

41

Rear-discharge garden tractor for small and medium-sized areas

> 3000 m2

OM 72 C/12,5 K H Displacement Engine make/model Cutting width Propulsion Bag capacity

414 cm3 Emak K 1250 AVD 71 cm hydrostatic 170 L

> 4000 m2

Rear-discharge garden tractors for medium-sized areas

OM 84/14,5 K H Displacement Engine make/model Cutting width Propulsion

OM 84/14,5 K H

Bag capacity

Displacement Engine make/model Cutting width Propulsion Bag capacity

OM 91 PLUS/14,5 K M

432 cm3

432 cm3

Emak K 1450 AVD

Emak K 1450 AVD

84 cm

92 cm

hydrostatic

5 forward speeds + reverse

240 L

210 L

OM 91 PLUS/14,5 K H

OM 92 S/13,5 H

432 cm3

344 cm3

Emak K 1450 AVD

B&S Powerbuilt 3130 AVS series

92 cm

92 cm

hydrostatic

hydrostatic

210 L

300 L

Rear-discharge garden tractors for large areas

Displacement Engine make/model OM 101 C/16 K H

Cutting width Propulsion Bag capacity

42

6000-6500 m2

OM 101 C/16 K H

OM 102 C/18,5 H

OM 106 S/15,5 H

452 cm3

500 cm3

500 cm3

Emak K 1600 AVD

B&S Powerbuilt 4185 AVS series

B&S Powerbuilt 4155 AVS series

102 cm

102 cm

102 cm

hydrostatic

hydrostatic

hydrostatic

260 L

300 L

300 L

6500-9000 m2

Professional garden tractors with rear-discharge for large areas

Displacement Engine make/model Cutting width Propulsion OM 106 S/24 H 4x4

Bag capacity

OM 106 S/16 H

OM 106 S/17,5 H

OM 106 S/18 H

479 cm3

500 cm3

570 cm3

B&S Vanguard V-Twin

B&S Intek 4175 AVS series

B&S Vanguard V-Twin

102 cm

102 cm

102 cm

hydrostatic

hydrostatic

hydrostatic

300 L

300 L

300 L

OM 106 S/24 H 4x4 Displacement Engine make/model Cutting width Propulsion Bag capacity

724 cm3

656 cm3

B&S 8240 V-Twin series

B&S 7220 V-Twin series

102 cm

122 cm

hydrostatic 4 WD self-locking differential

hydrostatic

360 L

360 L

Professional all-terrain garden tractors

CHEYENNE 110 4x4 Displacement Engine make/model

OM 124 S/22 H

> 10000 m2

APACHE 92 EVO

APACHE 92 EVO 4x4

CHEYENNE 110 4x4

570 cm3

627 cm3

627 cm3

B&S Vanguard V-Twin

B&S Vanguard V-Twin

B&S Vanguard V-Twin

Cutting width

92 cm

92 cm

110 cm

Cutting height

50-60-75-90 cm

50-60-70-80-100 cm

40-120 cm

hydrostatic self-locking differential

hydrostatic 4 WD self-locking differential

hydrostatic 4 WD self-locking differential

Propulsion

43

Protection of plants, hedges and lawns 44

Watering of plants, hedges and lawns

Every kind of home and professional irrigation requirement,

Proper, regular watering is a fundamental aspect of looking

be met confidently with self-priming and centrifugal water

after plants and greenery. During spring and summer, in particular, plants, hedges and lawns need a supply of water sufficient, and carefully gauged, to ensure that the roots do not dry out and the growth will remain green and lush.

from private gardens to small-medium crop cultivation, can pumps: these machines are lightweight and easy to handle, yet tough and reliable over time, available in a range of displacements and with different types of engine, offering maximum flexibility under any conditions and guaranteeing

In the case of lawns, especially, water should be distributed

optimum efficiency even with long suction runs.

uniformly and rained in fine droplets. If newly seeded, the

In the case of plants and hedges, in particular, it is best that

lawn needs to be kept moist on the surface, and should therefore be sprinkled 2-3 times a day with moderate amounts of water.

As the grass begins to grow, it will need to be watered more abundantly and less often, so that the water can penetrate well down into the soil. A mature lawn â&#x20AC;&#x201C; well into spring, especially during dry spells â&#x20AC;&#x201C; can be well watered every 4 or 5 days. The best time to water is undoubtedly in the early morning, as the soil cools down during the night and early watering will avoid thermal shock; also because when the sun is high, moisture will evaporate too quickly. When the lawn is particularly dry, it is advisable to water sparingly at first, and then increase the amount by stages.

the water used should never be too cold: sprayers or lances are ideal for delivering atomized water at the most suitable temperatures.

Protection of plants, hedges and lawns The preservation of green areas is a major concern, especially in the urban context: indeed plants play a role of fundamental importance not only from the health and hygiene standpoint, as the optimum antidote to pollution,

The essential purpose of these machines is to atomize the active chemical in solution with water, and spray it at the vegetation being treated. They can spread liquids (such as fungicides and pesticides) or powders formulated to safeguard the health and growth of the vegetation.

but also because of the recreational, cultural, social and

In connection with this family of machines, mention should

aesthetic needs they are able to satisfy.

be made of the technological progress made in recent

Besides needing water, all plants, hedges and lawns must be fed with other substances that are essential if they are to prosper. Treatments and disinfestations of green areas â&#x20AC;&#x201C; including crops, small plantations and greenhouses â&#x20AC;&#x201C;

years as regards their general specifications and materials, the adaptation of their performance to the needs of particular tasks, and in the areas of safety, health and hygiene.

are carried out generally with the aid of mistblowers and

As a general rule, finally, it should be remembered that

sprayers.

these types of treatment are best done when conditions are cooler, avoiding the middle part of the day. Also, to ensure that treatment products are used effectively and to avoid releasing excessive amounts into the environment, spraying or dusting operations should not be undertaken in windy or rainy conditions.

45

Routine maintenance of self-priming/non self-priming water pumps

strainer version) with petrol, dry off and refit; for versions with foam or cloth air filter, shake the element out thoroughly and blow clean with compressed air. Replace if damaged.

Periodically, check the condition of the fuel filter; on versions with float-type carburettor, the filter is located on the carburettor fuel line fitting and should be cleaned with

Guide to water pump selection

petrol. For versions with diaphragm carburettor, replace the filter if dirty.

Total head H (m)

Clean the spark plug periodically and check the electrode gap (0.5 mm); on 4-stroke versions, check the level of the oil after every 10 hours operation and renew after 50 hours.

Flow rate Q (l/min)

Major servicing Every 300 hours, check the suction/discharge balance.

Total head H (m) Total length of pipeline Ø 40mm

At least once a year, inspect the diaphragms of the highpressure pump and replace if necessary.

Renew the oil and check the tightness of the bolts securing the pump assembly.

Flow rate Q (l/min)

Total length of pipeline Ø 40mm

Total head H (m)

46

Proper maintenance of water pump

After every 10 hours operation, clean the air filter (metal

Total length of pipeline Ø 25mm

Water pumps

A complete range of self-priming and centrifugal water pumps, suitable for every kind of home and professional irrigation requirement, as well as building and deflooding services.

Lightweight and easy to handle, yet tough and dependable, these are pumps with a high head-to-flow ratio, offering maximum flexibility under any conditions, and optimum efficiency even with long suction runs.

Flow rate Q (l/min)

46 46

Self-priming water pumps

WP 300 Power Displacement

WP 300

SA 30 TLA

1.3 HP - 1.0 kW

2.1 HP - 1.6 kW

30 cm3

50.2 cm3

Max. flow rate/Max. head

150 L/min/36 m

270 L/min/30 m

Suction Ø/Delivery Ø/Suction head

1”/25.4 mm/7 m

1.5”/38.1 mm/7.3 m

centrifugal

centrifugal

5.5 Kg

8.5 Kg

Pump type Total dry weight

Non self-priming water pump

SC 33 Power Displacement Max. flow rate/Max. head Suction Ø/Delivery Ø/Suction head Pump type Total dry weight

2.1 HP - 1.6 kW 50.2 cm3 320 L/min/30 m 1.50”/38.1 mm/7.3 m centrifugal 6.5 Kg

47

Mistblowers

Designed to give users maximum convenience, long uninterrupted spells of operation and high efficiency.

Innovative technological design solutions guarantee intensive and uniform treatments, effected in rapid time and with maximum practicality.

A must for any grower intent on keeping a greenhouse, field crop or plantation perfectly healthy all year round.

Clean the cylinder fins periodically, removing dirt and debris with a brush and compressed air.

Proper maintenance of mistblower Periodically, inspect the air filter, and replace if damaged; inspect the fuel filter, and replace if dirty.

Check the spark plug periodically and check the electrode gap (0.5 mm).

Remove the flame-trap mesh from the exhaust silencer once a week, and clean off carbon deposits.

Inspect the liquids filter, wash in clean detergent and dry off; clean the ULV filter by blowing compressed air through the six orifices.

When using a mistblower to deliver notably aggressive

Clean the fan cowl periodically, freeing the grill of dirt and debris.

chemicals, check and/or replace the seals.

Clean the equipment thoroughly after each treatment.

Guide to mistblower selection Designed for use in the garden or in smallholdings, these are machines for the discerning user, keen to benefit from the latest technological solutions.

Driven by powerful and reliable engines of around 60-70 cm3 displacements, they offer users maximum convenience, long uninterrupted spells of operation, and high efficiency.

Backpack design reduces carrying weight to render the task of the operator that much easier.

Mistblowers come with 2-stroke engines in various sizes depending on the type of use intended.

They incorporate a booster pump â&#x20AC;&#x201C; ensuring a longer throw of sprayed liquids to give better results on taller vegetation â&#x20AC;&#x201C; and a ULV kit that optimizes the delivery of sprayed liquids to prevent waste.

Standard features include easily accessible controls and capacious tanks.

Other particularly useful accessories are a conversion kit for treatments utilizing powdered or small granulated products, and a double jet kit, both simple to install.

48

Backpack mistblowers AM 162

MB 80 MB 800

Power Displacement Max. air flow Liquid delivery rate

4.5 HP - 3.3 kW

5 HP - 3.7 kW (SAE)

61.3 cm3

72.4 cm3

3

20.0 m /min

16.0 m3/min

0.67 รท 5.15 L/min

0.5 รท 3 L/min

Liquid tank capacity

16.0 L

14 L

Weight

11.5 Kg

12.5 Kg

Model MB 80 available only in certain markets.

AM 162

49

Sprayers

Ideal for targeted and selective treatments, thanks to the convenient pressure and atomization controls.

The machine directs the spray just where it is needed, avoiding unnecessary waste and ensuring plants and crops are not damaged.

High resistance to stress assured, even when for lengthy stints and operating in hostile conditions.

Proper maintenance of sprayer Inspect the air filter, and replace if clogged or damaged.

Check the condition of the fuel filter periodically; if soiled excessively, discard and fit a replacement.

Clean the cylinder fins periodically, removing dirt and debris with a brush and compressed air.

Periodically, clean the spark plug and check the electrode gap (0.5 mm).

Guide to sprayer selection For targeted and selective treatment on vegetation and crops the recommended machines are backpack models equipped with petrol engines of between 20 and 30 cm続 displacement, preferably with primer and Lift Starter for easy ignition. Equally important is the possibility of pressure adjustment, to precisely match the flow pressure to the type of use. Available with different lances with multiple jets for a larger angle of atomisation.

50

Backpack sprayer SP 126 Power Displacement Liquid tank capacity Max. delivery rate Max.pressure Weight

1.2 HP - 0.9 kW 25.4 cm3 25 L 8 L/min 35 Kg/cm2 9.0 Kg

51

52

Other power equipment

53

High-pressure washers

Ideal for cleaning outdoors around the home, in the garden and the garage: a natural addition to the Emak range of products for gardening and plant care. Vanguard materials and manufacturing methods combine with innovative design to ensure hygiene, cleanliness and optimum results. Special electrical device ensures smooth power-up and start, whatever the type of connection to the mains supply.

Proper maintenance of high pressure washer Check the power cable, high pressure hose, fittings and lance hose.

Periodically check the level of oil in the pump, and change the oil when necessary.

Clean the water inlet filter periodically.

Check the water circuit of the pump, and change the hoses if necessary.

Clean the jet nozzle periodically, using the special pin provided.

Check the inlet and outlet valves of the pump.

Check the pump control valve.

Check the tightness of the pump screws.

Inspect the safety devices.

Guide to high pressure washer selection For cleaning outdoor areas around the home, garden or garage, we recommend cold water high pressure washers, which are designed to ensure convenient and practical cleaning. Supplied with a generous standard equipment package, these high pressure washers deliver lasting performance and efficiency.

Professional users should opt for the professional cold water high pressure washers, which assure structural strength and dependability in any working conditions thanks to internal parts made of stainless steel and brass, as well as tough piston pumps with control valve and pressure gauge.

For cleaning large areas (such as yards and arcades), industrial facilities such as factory floors or machinery, and whenever the extra cleaning power of hot water is required, we recommend the hot water electric high pressure washer. It incorporates a vertical boiler with double spiral coil, for fast water heating.

54

Electric high-pressure washers (cold water) for home use

PW 170 C

PW 121 C

PW 136 C

PW 145 C

PW 155

PW 170 C

Max. pressure

130 bar

140 bar

150 bar

150 bar

155 bar

Max. flow rate

360 L/h

410 L/h

480 L/h

480 L/h

540 L/h

Rated power

1700 W

2000 W

2300 W

2300 W

2700 W

Voltage

230 V

230 V

230 V

230 V

230 V

Pump

metal

metal

brass

brass

brass

yes

yes

yes

no

yes

Hose reel

Electric high-pressure washer (hot water) for professional use

PW 300 HC Max pressure

150 bar

Max flow rate

540 L/h

Rated power

2700 W

Voltage

230 V

Pump

axial 3-piston with brass head

Hose reel

yes

55

Rotary tillers

Machines for gardeners, growers and landscaping contractors; indispensable for soil preparation, cultivation and general tillage over sizeable expanses.

Sturdy, yet easy to handle, these machines will make light work even of the hardest and most uncultivated soils, when preparing for future grass or crop seeding.

Proper maintenance of rotary tiller Change the engine oil after every 6 months or 50 hours of use.

Check the fuel filter periodically, replace if damaged or excessively soiled.

Clean or replace the air filter periodically.

Keep the cooling circuit clean, and clean or replace the spark plug periodically.

Clean the cylinder fins periodically by brushing, or blasting with compressed air.

Periodically lubricate the mechanical linkages, control cables and belt tensioner pivot with oil.

Check the condition of the blades periodically and sharpen or replace as necessary.

At least once during every season, check the tightness of all nuts and bolts, especially those of the blade rotor.

Check the spark arrester screen periodically and replace it if holed, bent or buckled.

Check the level of oil in the gear case before using the machine, every time. Change the oil periodically.

Inspect and adjust the tensioner and propulsion control cables.

Guide to rotary tiller selection Robust and reliable, easy to handle and user-friendly, rotary tillers are indispensable for soil preparation, cultivation and general tillage over sizeable expanses.

For home users taking care of small-medium sized gardens and allotments that call for periodic maintenance and a range of different activities we recommend models with rotors from 60 to 80 cm, equipped with overhead valve (OHV) engines with displacement of up to 200 cm3. The adjustable handlebars allow the operator to work more comfortably.

The professional model with 90 cm rotor, ideal for gardeners and market gardeners, is designed to offer excellent performance also on hard soils and uneven terrain and it is an invaluable machine for both landscape maintenance and agricultural operations. Equipped with reverse gear which facilitates manoeuvres and repositioning of the machine in accordance with work requirements.

Equipped with adjustable handlebar with different position settings for maximum versatility of use.

56

Compact rotary tiller for home use and accessories MH 130 Engine make/model

Honda GX 25

Displacement

25 cm

Gearbox

Set of 4 cutters

Plough

3

1 forward speed

Rotor

2+2 blades - 30 cm

Roller brush

Scarifier

Rotary tiller for home use MH 150 RK Engine make/model Displacement Gearbox Rotor

Emak K 700 H OHV 183 cm続 1 foward speed + 1 reverse 2+2 blades 60 cm with protection discs

MH 150 RK

Rotary tillers for intensive use

MH 190 RX

Engine make/model Displacement Gearbox Rotor

MH 180 RK

MH 180 R

MH 190 RX

Emak K 800 H OHV

B&S 950 OHV series

Honda GX 160 OHV

183 cm続

208 cm続

163 cm3

1 foward speed + 1 reverse

1 foward speed + 1 reverse

1 foward speed + 1 reverse

2+2 blades 80 cm with protection discs

3+3 blades 80 cm with protection discs

3+3 blades 80 cm with protection discs

Rotary tillers for professional use MH 210 R Engine make/model Displacement

Honda GX 160 OHV 163 cm3

Gearbox

2 forward speeds + 1 reverse

Rotor

3+3 blades 90 cm with protection discs

57

Earth augers

Used for sinking holes to receive vines and plants in general, greenhouse poles or fence uprights, lampposts.

Machines affording superior mechanical strength under the most hostile of conditions, in all operating positions and for the toughest of jobs on the hardest of soils.

Proper maintenance of earth auger Inspect and clean the air filter periodically.

Check the state of the fuel filter periodically, and replace if necessary.

To ensure efficient cooling, clean the cylinder fins by brushing, or blasting with compressed air.

Clean the spark plug periodically and check the electrode gap.

After every 100 hours of use, change the grease in the gear case.

Inspect the bit regularly for signs of wear and damage.

Check the flight and the pilot tip, sharpening or replacing as necessary.

Guide to earth auger selection For small holes we recommend medium-power models (up to 50 cm続) which are ideal for individual work, since the engine controls can be operated using one hand.

For larger holes and harder soils which require the presence of two operators, we recommend the high-power professional models (up to 90 cm続), with double handle and reversing gear. The two-man professional models can also be used with auger bits of smaller diameter by fitting the adapter supplied.

58

Earth augers

Power

MTL 51

MTL 85 R

2.1 HP - 1.6 kW

5.7 HP - 4.2 kW

3

50.2 cm

Bit diameter

8-10-15-20 cm

from 8 to 50 cm

9.1 Kg

30.6 Kg

Weight without bit

MTL 51

80.7 cm3

Diplacement

59

Snow throwers are ideal machines for clearing snow from patios, pavements and paths even on a slope. All models, equipped with

Snow throwers

special supergrip snow tyres or tracks, guarantee the maximum grip on all types of terrain and ground surface, even with compact or frozen snow.

Proper maintenance of snow thrower Each time the snow thrower is to be used, check the oil level and, if necessary, change the oil (refer to the operating and maintenance manual).

In the electric starting model check the battery charge at least once every 3 months.

Check that the tyre inflation pressure is correct.

Lubricate the augers via the relative grease nipple; lubricate the ejector chute rotation ring at least once every 3 months.

Guide to snow thrower selection The model must be chosen on the basis of the snow conditions in the area of use; for example, if the snowdrifts to be removed are small, it is better to avoid excessively wide augers (efficiency of the snow thrower is optimal only when the impeller is completely filled with snow). Models with limited working width are also the most suitable for working in confined spaces or when the Garden has many obstacles and a large number of curves.

Vice versa, select models with wider augers (and consequently with more powerful engines) combined with crawler track transmission to clear heavy snowfalls.

If the snow thrower is to be garaged in a place that is poorly protected from low temperatures, choose an electric start model to avoid starting problems. The heated handgrips provide the maximum level of operator comfort during use of the snow thrower.

60

ARTIK snow throwers for home use

ARTIK 56 EL

ARTIK 52

ARTIK 56

ARTIK 56 EL

Engine

163 cm³ (5.5 HP)

182 cm³ (6 HP)

212 cm³ (7 HP)

Starting

manual

manual

manual/electric 12 V

Working width

52 cm

56 cm

56 cm

Propulsion

manual

self-propelled

self-propelled

Gearbox

1 forward speed

7-speed (5 forward + 2 reverse)

7-speed (5 forward + 2 reverse)

N° stages

1 stage

2

2

manual / 190° vertical 70° horizontal

manual / 190° vertical 70° horizontal

manual / 190° vertical 70° horizontal

2-8 m

8-12 m

8-12 m

no

no

no

Ejector chute adjustment Maximum discharge range Control console Worklight

no

no

yes

Tyres type

9"x3.5"x6 super-grip

13"x4.1"-6 super-grip

13"x4.1"-6 super-grip

45 kg

70 kg

73 kg

ARTIK 62 ELD

ARTIK 70 ELD

ARTIK 72 ELDT

Weight

ARTIK 70 ELD

Engine

265 cm³ (9 HP)

302 cm³ (10 HP)

375 cm³ (13 HP)

Starting

manual/electric 230 V (110 V)

manual/electric 230 V (110 V)

manual/electric 230 V (110 V)

62 cm

70 cm

70 cm

self-propelled

self-propelled

self-propelled

8-speed (6 forward + 2 reverse)

8-speed (6 forward + 2 reverse)

8-speed (6 forward + 2 reverse)

Working width Propulsion Gearbox N° stages Ejector chute adjustment Maximum discharge range Control console

2

2

2

manual / 190° vertical 70° horizontal

manual / 190° vertical 70° horizontal

manual / 190° vertical 70° horizontal

10-15 m

10-15 m

10-15 m

yes

yes

yes

Worklight

yes

yes

yes

Tyres type

14"x5"-6 super-grip

15"x6.5"-7 super-grip

tracks

85 kg

118 kg

118 kg

Weight

61

Transporters

Ideal for construction and agricultural duties involving the transportation of bulky and heavy loads on steep gradients or over rough terrain. Designed to stringent quality standards, these machines offer top performance in terms of carrying capacity, matchless longterm reliability and a high level of operator safety even on steep gradients.

Proper maintenance of transporter Check the oil level regularly and change the oil whenever necessary.

Inspect and clean the air filter periodically, replacing as necessary.

Keep the cooling circuit clean, and clean or replace the spark plug.

Change the transmission oil after the first 50 hours of use and then after every 100 hours of use.

Inspect and clean the brake assembly periodically.

Adjust the side-mounted halfshaft release and brake levers.

Check the track tension adjustment periodically.

Guide to transporter selection For carrying firewood or harvesting fruit on private land, the ideal choice is the manual dump transporter, which generally offers a load capacity of up to 400 kg. A useful feature is the telescoping dumper body, which facilitates loading operations and makes it easier to carry very bulky loads.

On the other hand, if you are looking for a transporter which guarantees matchless long-term reliability and solid grip on any type of terrain, the recommended option is a professional transporter with load capacity of between 400 and 600 kg. Equipped with manual or hydraulically-operated dumper body, they also incorporate telescoping and fully collapsible sides.

An essential feature is the tight turning radius, for easy manoeuvring even in confined spaces.

62

Transporters for home use

CR 270 K Engine Displacement

CR 270 H

CR 270 K

Honda GCV 140

Emak K 650 OHV

3

160 cm

159 cm3

Gearbox

2+2

2+2

Lift/dump

manual

manual

telescoping / 270 Kg

telescoping / 270 Kg

Loading deck/Payload

Professional transporters

Engine Displacement

CR 450

CR 560

Honda GX 160

Honda GX 160

3

163 cm

163 cm3

Gearbox

3 + 1R

4 + 2R

Lift/dump

manual

manual

telescoping / 450 Kg

telescoping / 550 Kg

Loading deck/Payload

CR 560

63

Safety first and foremost Operator safety is one of the top priorities for manufacturers of gardening machines. In addition to designing and implementing technological devices designed exclusively to safeguard the user, Oleo-Mac also presents a genuinely comprehensive range of protective clothing and a generous selection of accessories designed especially to improve levels of safety still further, all of which type approved to EC standards.

Protective clothing

Protective helmet Safety Approved helmet to EN 397, ANSI Z89.1:2003.

Approved ear defenders to EN 352-3: 1997.

Approved face shield to EN 1732, EN 166.

Materials Shell in UV-resistant polyethylene.

Plastic harness with 4-point suspension.

Sweatband and manual adjustment system.

SNR 23 dB adjustable ear defenders.

Face shield holder.

Metal mesh face shield.

Professional protective and noise-filtering ear defenders Safety EN 352-1 approved ear defenders.

Category 2 PPE. Materials Shell made of UV-resistant ABS (shock absorbent).

Stainless steel headband.

Adjustable.

Attenuation (SNR): 32 dB. PVC + foam sound insulation.

Professional anti-vibration gloves Safety Approved gloves to EN 388/03.

Category 2 PPE. Materials 1.2–1.4 mm gauge full-grain cowhide.

Double layer on palm and thumb.

Elasticated cuffs.

Leather cuff guard for arteries.

Antivibration protection on palm and back.

Polyester dorsal reinforcement.

Dungarees with anti-cut protection Safety CE approval, standards EN340 and EN 381-5: 1995 type A, Class 1, Category 2 PPE. Special 8-layer anti-cut protection.

Visibility Orange coloured bib.

Detail of pockets.

Materials Materials.

33% cotton, 67% polyester, 245 g/m2.

Waterproofed bottom.

64

Jacket with anti-cut protection Safety CE approval, standards EN340 and EN 381-11: 2002, Class 1.

Category 2 PPE. Special 8-layer anti-cut protection.

Visibility Large front and rear orange coloured area with reflective profile for the maximum daytime and night-time visibility.

Materials Impermeable.

33% cotton, 67% polyester.

245 gr/m2.

Dark protective spectacles Safety EN 166 approved protective spectacles.

Optical class 1.

Materials Wrap-around anti-scratch lens, dark, anti-glare in sunlight, soft silicone nose pads.

Mechanical strength: Lens FT - Frame FT.

Professional brushcutter operator trousers Safety Approval CE EN340.

Class 1.

Category 1 PPE. Visibility Orange coloured trims.

Materials Waterproofed fabric 33% cotton, 67% polyester.

High strength protection at the front of the leg.

Leg protection 30% cotton, 70% polyester.

Chain resistant forestry boots Safety Approval EN ISO 17249, EN ISO 20344, EN ISO 20345 (class S3CI-HRO), Class 2.

Category 2 PPE. Materials Upper in water repellent full grain leather.

Inner lined in leather and breathable fabric.

Anti-impact padding at calf height.

Anatomical and antistatic “EVA” footbed with high sweat absorption / deabsorption coefficient.

HRO-rated vulcanized rubber sole (resists temperatures up to 300°) with deep cleated tread.

Puncture resistant sole plate.

Rigid steel toecap and blade blocking protection from top of foot up to the shin and on the sides.

Accessories and spare parts - the value of being original To ensure machines will give long service and stay effective throughout, always use original spare parts and accessories: a certain way to continue reaping the benefits of performance and safety standards offered by chainsaws, lawnmowers, brushcutters, garden tractors and all other products in the Oleo-Mac range.

“PROSINT 2” special oil for 2-stroke engines Special “PROSINT 2” synthetic ester-based lubricant, expressly formulated for high-performance 2-stroke engines. Special oil for use at 2% (50:1). Effective lubrication at high temperatures. Low emissions, reduced wear and clean engine.

Its pre-fluidified composition makes preparing the mixture easy. Colour: dark red.

Exceeds API TC, JASO FC and ISO-L-EGD specifications.

NEW LIFE LUBE guide bar and chain protector Formulated expressly for the protection of guide bars and chains, based on a balanced blend of oils which are specially resistant to low temperatures. Easily biodegradable.

Special additives guarantee appreciable protection against wear and seizure. Good viscosity and pour point.

POLAR LUBE mineral oil for guide bars and chains Mineral-based lubricant, high viscosity, extremely adhesive, formulated for lubrication of chain saw guide bars and chains. Ensures excellent stability and pour point at low temperatures, good wear protection and outstanding corrosion resistance.

Special oil for 4-stroke engines – SAE 10 W - 30 Synthetic oil based lubricant, SAE 10 W - 30 grade, specifically developed for 4-stroke air- and water-cooled engines used in gardening sector applications. High-performance all-season oil containing a special combination of additives that give excellent detergent and dispersant, antioxidant, anticorrisive, and anti-wear properties.

Accessories and spare parts

To find out about the extensive range of original parts and accessories, consult an Oleo-Mac authorized dealer.

Exceeds API SL/CF specifications.

Special grease Special high quality lithium grease with molybdenum bisulphide, recommended for any mechanical component subject to heavy loading.

Exceeds ISO 6743-9; DIN 51825 KPF 2K - 30 specifications.

“ADDITIX 2000” special additive for petrol and diesel fuels Ideal for conditioning diesel fuel, 2-stroke mixture and leaded or unleaded petrol.

Prevents deterioration of fuel for at least 12 months and protects against oxidation Facilitates starting, keeps fuel system clean, and protects against rust and corrosion.

65

Greater peace of mind and efficiency thanks to technical assistance Mowing the lawn, clearing up grass and twigs, trimming hedges or thinning the foliage of trees, watering, pruning,

Advantages offered by Oleo-Mac dealerships Advice on purchase:

these are important jobs that need to be done, if gardens or outdoor areas are to look good and stay healthy, but they can also be of value simply as enjoyable pastimes for lovers of greenery and life in the open air.

the Oleo-Mac dealer will advise you on the machine best suited to your needs, and provide all

Enjoyable, thanks not least to the high standards offered by

pertinent information on correct use of the product.

all Oleo-Mac machines in terms of performance, comfort and safety. A machine must be used correctly and properly

Service

Specialized technical service:

maintained if it is to retain its original quality, add value to

users are ensured quality repairs, carried out as

the work of the operator and deliver the expected service life

quickly as is practically possible. Products for home

and long-term reliability. Accordingly, the careful observance

use are guaranteed two years.

of a few simple guidelines will ensure you continue to derive maximum satisfaction from your machine.

After-sales service: all Oleo-Mac dealers are skilled operators who regularly attend refresher and specialization courses enabling them to offer the customer clear and comprehensive information, always in line with developments in the sector.

Contact only an Oleo-Mac authorized dealer when making a purchase: you will be advised as to which is the best machine for your needs, told about correct

Original parts and accessories:

repairs or replacements of components are carried out using only Oleo-Mac original spare parts and accessories. A guarantee that machines will maintain their performance undiminished over time.

and safe operating procedures, and instructed how to prepare it for first time use; Every machine is accompanied by an Operator Instruction Book included in the packaging, which you will receive at the moment of purchase: be sure to read the book carefully before use; Have your product checked over periodically by an Oleo-Mac authorized dealer: this will ensure the machine always stays in tip-top condition and matches up fully to your expectations; Always use original spare parts and accessories, which your Oleo-Mac authorized dealer will be able to supply.

66

Data and illustrations published in the catalogue are not binding where specifications of materials are concerned, given that these will always be subject to technical improvement. Technical specifications given in the catalogue are subject to change without notice, as also are directions relating to general use of the equipment.

Certain items are not available in all countries, or are available only on request.

Subject to modifications. Some models are available for certain markets only. - Cod. 001101326M - 2014

It’s an Emak S.p.A. trademark 42011 Bagnolo in Piano (RE) Italy Tel. +39 0522 956611 • Fax +39 0522 951555 info@myoleomac.com • www.myoleomac.com www.youtube.com/MyOleoMac