Eldec Pico de

PICO-S

PICO-L

PICO by eldec

PICO by eldec – small, red, strong

www.eldec.net

PICO by eldec – small, red, strong Just heat! Low-cost energy sources with a single output and very simple intuitive control.

The PICO Series is available in two housing sizes and a wide range of capacity classes. PICO-S and PICO-L are our low-cost devices with uncompromising eldec quality due to the high level of component standardization. Developed, built, and tested “by eldec.” eldec PICO generators are available in the form of medium-frequency and high-frequency energy sources from 5 to 150 kW for the inductive heating of a wide range of workpieces and materials.

Thanks to the new, intuitive user interface, plug & play is a reality. Equipped with familiar user-friendly functions, it is a simple but extremely powerful generator.

If you have any other requirement, such as higher output power levels, multiple outputs, frequency range switching, low frequencies, dual frequencies, or simultaneous frequencies (LF, DF, SDF®), eldec can supply customizable solutions with its ECO LINE and CUSTOM LINE series.

PICO generators are extremely compact, but pack a very high power density. For example, the PICO-S generator (tabletop housing size) is available with 30 kW MF – the best ratio of size-t-power on the market.

PICO-S

Type / Power connection Maximum power ± 10 % 50/60Hz V

A

PICO-S 5 MF PICO-S 10 MF PICO-S 15 MF PICO-S 20 MF PICO-S 30 MF

3 x 400 3 x 400 3 x 400 3 x 400 3 x 400

10 20 32 35 63

PICO-S 5 HF PICO-S 10 HF PICO-S 15 HF

3 x 400 3 x 400 3 x 400

PICO-L 50 MF PICO-L 75 MF PICO-L 100 MF PICO-L 150 MF PICO-L 25 HF PICO-L 35 HF PICO-L 50 HF PICO-L 75 HF

PICO-L

Cooling water consumption Dimensions / Weight without inductor Generator l/min

W x H x D mm (in)

kg

8 8 8 10 12

450 x 280 x 510 (18 x 11 x 20) 450 x 280 x 510 (18 x 11 x 20) 450 x 280 x 510 (18 x 11 x 20) 450 x 280 x 510 (18 x 11 x 20) 450 x 280 x 510 (18 x 11 x 20)

50 50 50 50 60

10 20 32

8 8 8

450 x 280 x 510 (18 x 11 x 20) 450 x 280 x 510 (18 x 11 x 20) 450 x 280 x 510 (18 x 11 x 20)

50 50 50

3 x 400 3 x 400 3 x 400 3 x 400

100 160 200 315

27 32 37 50

550 x 910 x 800 (22 x 36 x 31) 550 x 910 x 800 (22 x 36 x 31) 550 x 910 x 800 (22 x 36 x 31) 550 x 910 x 800 (22 x 36 x 31)

150 150 170 200

3 x 400 3 x 400 3 x 400 3 x 400

50 63 100 160

11 12 27 32

550 x 910 x 800 (22 x 36 x 31) 550 x 910 x 800 (22 x 36 x 31) 550 x 910 x 800 (22 x 36 x 31) 550 x 910 x 800 (22 x 36 x 31)

150 150 160 180

MF frequency range: 8 – 20 kHz or 16 – 40 kHz HF frequency range: 70 – 175 kHz or 140 – 350 kHz

PICO-L 75 MF with chassis and hose package storage

Cable box with heating cable for shrink-fit application

Range of functions, equipment and options User health and safety are important to us, as is system availability. Therefore, the units feature tried-and-tested eldec quality with electrical isolation of all external signal connections. In addition, the cooling water and cooling element temperature, as well as the generator and inductor cooling water temperature are monitored consistently. Find out more at our EMAG eldec Induction YouTube channel.

Equipment: ––Operating modes: continuous, jog and timer ––Control types: power, electricity and temperature using a pyrometer ––8 different timers, each with a max. running time of 600 seconds ––Memory for recipe storage, up to 50 recipes ––Intuitive operation using sealed keypad and display ––Also for PICO-L: 2-channel Emergency Stop ––Control possible via foot switch or foot pedal and external interface Options: ––eldec brazing gun can be used ––Housing suitable for crane transport available for PICO-L ––Protection IP54 and mobile base available for PICO-L (Standard IP40)

Brazing carbide metal blades to a meat grinder tool

Brazing of flat copper strands on form-wound stators

Brazing carbide metal pins to a road milling tool

Hardening the cutting edges of forming dies

Features of all eldec PICO generators ––Robust IGBT transistor technology – protected from short-circuit and open-circuit conditions; even accidental workpiece contact “faults out” and does not damage the generator ––Electrical isolation through output transformers ––Flexible output - Hose package length of up to 15 m available ––Modular inverter technology ––Time-tested oscillation circuit components ––Automatic adjustment and power regulation by pulse width modulation (MF) and pulse package control (HF), even for transitions over Tcurie ––Simple operation and handling ––PID regulated temperature control ––Temperature and delivery rate-monitored fluid circuits ––Efficiency level > 90% (inverter output) ––Precision energy dosing (± 2 %) ––High speed eldec control unit (cycle time < 10 ms) ––Requires very little maintenance ––Large frequency, power and adjustment ranges ––All power details on the basis of 100% duty cycle

3

EMAG eldec Induction GmbH Otto-Hahn-Strasse 14 72280 Dornstetten Germany Phone: +49 7443 9649-0 E-mail: eldec.sales@emag.com

www.eldec.net

eldec Sales and Service Partners EUROPE

Sweden EMAG Salach GmbH Glasgatan 19B 73130 Köping Sweden Phone: +46 221 40305 E-Mail: info@sweden.emag.com Russia EMAG OOO ul. Akademika Chelomeya 3/2 117630 Moscow Russia Phone: +7 495 287 0960 Fax: +7 495 287 0962 E-Mail: info@russia.emag.com

Hungary EMAG Salach GmbH Gerenda 10 1163 Budapest Hungary Phone: +36 30 9362-416 E-Mail: lbujaki@emag.com Czech Republic EMAG Salach GmbH Lolkova 766 103 00 Praha 10 – Kolovraty Czech Republic Phone: +420 731 476070 E-Mail: mdelis@emag.com Poland EMAG Salach GmbH ul. Krzycka 71A / 6 53-020 Wrocław Poland Phone: +48 728 389 989 E-Mail: info@poland.emag.com

Italy EMAG MILANO S.r.l.

Via dei Mille 31 20098 San Giuliano Milanese (Mi) Italy Phone: +39 02 905942-1 Fax: +39 02 905942-24 E-mail: info.milano@emag.com France EMAG MILANO S.r.l.

Succursale en France 5 Avenue de L‘Europe 18150 La Guerche sur L‘Aubois France Phone: +33 02 48 7711-00 Fax: +33 02 48 7111-29 E-Mail: info.france@emag.com Spain EMAG MILANO S.r.l.

Sucursal en España Pasaje Arrahona, n° 18 Polígono Industrial Santiga 08210 Barberà del Vallès (Barcelona) Spain Phone: +34 93 7195080 Fax: +34 93 7297107 E-Mail: info.spain@emag.com

Market Companies AMERICA

ASIA

eldec LLC 3355 Bald Mountain Road, Unit 30 Auburn Hills, MI 48326 USA Phone: +1 248 364-4750 E-Mail: info@eldec-usa.com

EMAG (China) Machinery Co., Ltd. Sino-German Advanced Manufacturing Technology International Innovation park Building 2, No. 101, Chen Men Jing Road 215400 Taicang Jiangsu, China Phone: +86 512 5357-4098 Fax: +86 512 5357-5399 E-Mail: info@emag-china.com

EMAG KOREA Ltd. Rm204, Biz center, SKn Technopark 1 24 Sagimakgol-ro, Sangdaewon-dong Jungwon-gu, Seongnam City Gyeonggi-do, 462-721 South Korea Phone: +82 31 776-441 5 Fax: +82 31 776-4419 E-Mail: info@korea.emag.com

EMAG (Chongqing) Machinery Co., Ltd. No. 10th Lailong Road Yongchuan District 402160 Chongqing China Phone: +86 23 49783399 Fax: +86 23 49783388 E-Mail: info@emag-china.com

Shinsei Shoji Co., Ltd. 1 -1 -5 Iwamoto-cho Chiyoda-ku Tokyo Japan zip:101 -0032 Japan Phone: +81 3 3866-4881 Fax: +81 3 3866-4886

EMAG MEXICO Maquinaria EMAG Mexico S de RL de CV Av. Hercules 301 Nave 1 Poligono Empresarial Santa Rosa 76220 Santa Rosa Jauregui, Querétaro Mexico Phone: +52 442 291 1552 E-Mail: info@mexico.emag.com EMAG DO BRASIL Edifício Neo Corporate Offices, CJ 1503 Rua Enxovia, 472 04711-030 São Paulo SP Brasil Phone: +55 11 38370145 Fax: +55 11 38370145 E-Mail: info@brasil.emag.com

EMAG INDIA Pvt. Ltd. Technology Centre No. 17/G/46-3, Industrial Suburb, 2nd Stage, Yeshwantpur, Bengaluru – 560 022 India Phone: +91 80 50050163 E-Mail: info@india.emag.com

England EMAG UK Ltd. Chestnut House Kingswood Business Park Holyhead Road Albrighton Wolverhampton WV7 3AU Great Britain Phone: +44 1902 37609-0 Fax: +44 1902 37609-1 Turkey EMAG Salach GmbH Sanayi Cad. No.: 44 Nish Istanbul Sitesi D Blok D: 1 55 Yenibosna – Istanbul Turkey Phone: +90 532 694 54 44 E-Mail: ckoc@emag.com

303-1-GB/04.2020 · Printed in Germany · © Copyright EMAG - Subject to technical changes.

Denmark EMAG Salach GmbH Horsvangen 31 71 20 Vejle Ø Denmark Phone: +45 75 854854 Fax: +45 75 816276 E-Mail: info@daenemark.emag.com

Switzerland Kottonau AG (EMAG eldec Partner) Industriestrasse 19 8712 Stäfa Switzerland Phone: +41 447901 510 E-Mail: info@kottonau.ch

Download PDF

Austria EMAG Salach GmbH Glaneckerweg 1 5400 Hallein Austria Phone: +43 6245 76023-0 Fax: +43 6245 76023-20 E-Mail: info@austria.emag.com