BRAND: SOPREMA

Elastocol Stick

Single component primer composed of SBS synthetic rubbers, adhesion-enhancing resins and volatile solvents. It is used to enhance the adhesion of self-adhesive membranes on various substrates. Installation: Spread using a roller, in preparation for COLPHENE 3000 and COLPHENE BSW V membranes.

Flagon S

Synthetic membrane of plasticised PVC, non-reinforced used for detailing work.

Flagon Sfc

Synthetic membrane of plasticised PVC dimensionally stabilised by a glass fbre reinforcement and coupled to 200 g/m2 non-woven polyester felt support. FLAGON SFC is a cold applied, fameless solution, with self-extinguish properties. Installation: Fully adhered with FLEXOCOL A89 adhesive.

Flagon Sv

Synthetic membrane of plasticised PVC reinforced with a layer of glass fbre for dimensional stability. FLAGON SV is cold applied, fameless solution, with self-extinguish properties. Installation: Loose-laid under ballast.

Flagon Sr

Synthetic membrane of plasticised PVC reinforced with a polyester mesh and a signal layer on the surface. FLAGON SR is a cold applied, fameless solution, with self-extinguish properties. Installation: Mechanically fastened to the substrate with traditional fxings/ plates, or induction welded.

Flexocol A89

Single-component polyurethane adhesive, moisture curing liquid with medium-low viscosity, with controlled expansion. Installation: Spread using a squeegee, in preparation for FLAGON SFC membrane.

Flexocol V

Single-component elastomeric and solvent based adhesive, liquid with low viscosity, resistant to water; used for bonding FLAGON PVC waterproofng membranes on vertical surfaces. Installation: Spread using a brush, in preparation for FLAGON SV, FLAGON SR and FLAGON S membranes.

Sopradrain 20

High-performance drainage board composed of a polypropylene core on which a geotextile is factory laminated. It provides protection for waterproofng systems and manages sub-surface water around building foundations.

Sopradrain 10

High-density drainage board that provides effcient drainage for Green Roofs. It is composed of a polypropylene core on which a geotextile is factory laminated.

Colphene 3000

Self-adhesive waterproofng membrane composed of SBS modifed bitumen and a tri-laminated woven polyethylene facer. Installation: Self-adhesive, on a primed surface with ELASTOCOL STICK.

Colphene Bsw Uni Ng

Pre-applied heat-welded membrane designed for horizontal blind side waterproofng applications. It is composed of a select blend of high-performance fexible SBS elastomeric bitumen reinforced with an ultra-high strength double reinforcement system.

Colphene Bsw V

Self-adhesive waterproofng membrane composed of SBS modifed bitumen and a composite reinforcement designed for blindside waterproofng in vertical applications.