Problems In The Operation Of Briquette Machine!

Operation Of Briquette Machine

Introduction There are a lot of benefits of briquetting machines such as it reducing the chances of pollution because instead of burning waste material, human beings can reuse them.

Briquette machine is used for making briquettes from waste materials and human beings can make use of these briquettes as fuel.

Always Makes Noise The reason behind it is the water content and the temperature in the waste material are out of the normal range. And the only solution is drying waste material by the dryer to make sure that the materials are kept at proper humidity and temperature. The damaged components of the briquette machine are the reason of makes noise.

Restarts Frequently Replicate restart of the briquette machine is normally caused by the low power supply that can’t drive the machine to work usually. It would better suit the remedy to the case to solve this issue.

Initially, the AVO meter detects the power supply voltage of the briquette machine.

Oil Pressure Of Briquette There is inadequate oil pressure while the running procedure of the briquette machine. The reason is causing such a concern might be the deformation of the joint gasket and the blockage of oil suction.

It ought to be replaced the deformed gasket with a new one if the joint gasket is deformed so that the machine can work efficiently and normally.

Water resistance The suspension installation way is adopted by a lot of users while the installation of the briquette machine. But there is still a gap between the bracket hinge and the briquette machine. It is snowing or raining, the water can leak into the machine that is the reason for the damage. Thus, the waterproofing measure ought to be adopted while installation.

Deformation of Completed Products Occasionally, after being shaped, the completed products are deformed by the entire procedure and the reason behind it is that the waste materials hold a large amount of water. It can reduce the water content in the waste materials to solve this issue.

Contact Us +91-99140-33800 V.P.O. Lehra, Dist.

Ludhiana, Pin – 141118, Punjab (India) www.ecostan.com

support@ecostan.com