Factors That Improves The Quality Of Biomass

Factors That Improves The Quality Of Biomass

The quality of the biomass briquettes can be improved with the help of the biomass briquette machine. They are typically separated into two types: the external type and the internal kind. The main components of internal type are moisture, raw material type, and several others.

Numerous variables affect the process of creating biomass briquettes, which raises the briquettes' quality. In addition to internal type, exterior type primarily consists of pressure, heating temperature, raw material size, and many other factors.

Briquette Pressure The biofuel briquetting process can be divided into three steps – transition briquetting, stable briquetting, and soft briquetting.

With the first two steps, as the pressure decreases, the density will rise rapidly when the pressure increases. The most significant factor in biomass briquette making is pressure. Typically, increasing the pressure will upsurge the density of the biofuel briquette. The density will rise gradually along with the pressure or even non-sense with the pressure when it reaches the stable briquette process.

Heating Temperature The heating temperature has a huge impact on the briquette strength and density. The essential briquetting pressure will be lesser in high temperatures for the same waste material with certain humidity. In general, biomass briquette is a binder freeway as we make use of the internal binder – lignin.

At the approximate temperature of 70 to 100 Celsius, the lignin will become soft. The binding affection will be improved whereas the temperature increases.

Briquette and Pressure Keeping Time When pressure is low while it affects little when it’s huge, then the pressure will extremely affect the briquette quality. The pressurekeeping time can be overlooked in super high pressure. Usually, the quality of affection can be ignored if the pressure-keeping time is more than 40 seconds. And an extra ten seconds on pressure keeping will rise the briquette density by 5% when the briquette making time is more than twenty seconds.

Raw Material Type Different waste materials ought to be briquette in dissimilar briquette ways and select the appropriate briquette machine.

The raw material is with small plasticity when briquette at ordinary temperature, whereas biomass with great fiber rate is simple to briquette, particularly under high pressure. Raw biomass with high lignin, such as straw, wood type, and many more are good to briquette with a heating system since the lignin helps to make a better performance at the high temperature, which extremely enhances the plasticity.

Contact Us +91-99140-33800

V.P.O. Lehra, Dist. Ludhiana, Pin – 141118, Punjab (India)

support@ecostan.com

www.ecostan.com