Easby Electronics - EV Charging Brochure

Easby Electronics - EV Charging

Displays

Easby Electronics We are your “One Stop Shop” for all your EV requirements.

This brochure briefly highlights some of our EV specific offerings.

To discuss our full line of EV Charging Solutions, contact: sales@easby.com

• LCD, OLED, TFT & E-Paper • Standard, Semi-Custom & Custom • Touchscreen & Coverglass

Type 2 Socket • 32A Rated Current • 480Vac Rated Voltage • IEC 62196-2:2016 • 10,000 Mating Cycles

Holsters • Type 1 or Type 2 • Straight or Angled

Cables • Type 1, Type 2 & CCS2 • Tethered Cables • Single or 3 Phase • 5m, 7.5m, 10m & 15m

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Power Supplies Relays

Easby Electronics Your “One Stop Shop” for on and off board requirements. From Resistors to Capacitors, Terminal Blocks to Power Supplies.

Cable Assemblies

We are proud suppliers of: Semiconductors RCM’s

Displays Antennas

Transformers

Terminal Blocks IoT Modules

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Cables, Sockets & Locking Motors

Type 1 Cable (AC)

Type 2 Cable (AC)

Tethered Cables Type 1 & 2 (AC)

CCS2 Cable (DC)

5m, 7.5m & 10m

2m, 5m, 7.5m, 10m, 15m, 20m & 25m

5.5m, 8m & 10.5m

Any length upon request

32A

32A

32A

80A,125A, 150A, 200A & 250A

Phase

Single Phase

Single or 3-Phase

Single (Type 1 or 2) or 3-Phase (Type 2)

Voltage

250Vac (Single Phase)

250Vac (Single Phase) & 440Vac (3-Phase)

250Vac (Single Phase) & 440Vac (3-Phase)

1000Vdc

250Vac (Single Phase) & 480Vac (3-Phase)

Protection

IP54

IP54

IP54

IP54

IP54

Features

IEC 62196-2:2016

IEC 62196-2:2016

IEC 62196-2:2016

IEC 62196-3:2014

IEC 62196-2:2016 *Locking Motor option avaliable

Length

Amperage

Easby Electronics - EV Charging

Type 2 Socket (AC) with optional Locking Motor

32A

Single or 3-Phase

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Contactors

UEC1

HFE85V

G7Z

C310

C320

Amperage

16A, 20A, 25A, 40A & 63A

150A, 250A & 300A

40A

150A, 300A & 500A

1000A

Coil Voltage

24Vac, 110Vac, 220-230Vac

12Vdc, 24Vdc

12Vdc, 24Vdc

Contact Configuration

1NO, 2NO, 3NC, 2NO+2NC, 1NC, 2NC, 4NO, 3NO+1NC, 1NO+1NC, 3NO & 4NC

1NO+1NC (Auxiliary)

2NO+2NC, 3NO+1NC & 4NO

Mounting

DIN-Rail

Screw Mounting

DIN-Rail

M5 Mounting Plate

M5 Mounting Plate

Features

IEC/EN 60947-4-1, IEC/EN 61095, IEC/EN 60947-5-1

IEC60664-1

IEC60947-4-1

IEC 60947-4-1, UL 60947-4-1, ISO 16750-1, GB/T 14048.4

IEC 60947-4-1, UL 60947-4-1, ISO 16750-3, GB/T 14048.4

Easby Electronics - EV Charging

sales@easby.com

Monostable 12~24Vdc 48Vdc

Bistable 24Vdc 48Vdc

24Vdc

1 NO AC & Bi-Directional DC 1 NO AC & Bi-Directional DC

www.easby.com

+44 (0) 1748 850 555

Relays

HF170F

HF198F

HF187F

G7Z-A

G9KB

6, 9, 12, 24 & 48Vdc

9, 12, 24 & 48Vdc

9, 12, 24 & 48Vdc

12 & 24Vdc

12 & 24Vdc

Contact Arrangement

2NO, 2NO & 1NC (Auxiliary)

2NO & 1NC (Auxiliary)

4NO & 1NC (Auxiliary)

4NO, 3NO & 1NC, 2NO & 2NC

1NO

Max Switching Current

40A main, 1A (Auxiliary)

40A main, 1A (Auxiliary)

40A main, 1A (Auxiliary)

40A

50A

PCB

PCB

PCB

DIN-Rail

PCB

Compliant with EN60947-4-1 mirror contact.

Compliant with EN60947-4-1 mirror contact

Fulfill 3kA short circuit current test according to IEC 62955:2018

Fulfill 3kA short circuit current test according to IEC 62955:2018

Space saving performance exceeding 22Kw (32A)

High capacity switching up to 30kW/600Vdc with true Bi-Directional functionality without derating.

Voltage

Mounting

Features

Compliant with EN60947-4-1 mirror contact

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Relays

G7L-X

T9V

TMR120

RTH

12 & 24Vdc

12Vdc

6, 9, 12 & 24Vdc

9, 12 & 24Vdc

Contact Arrangement

2NO

1NO

1NO , 1NO & 1NC (Auxiliary)

1NO & 1CO

Max Switching Current

20A & 30A

40A

120A

16A

Mounting

PCB

PCB

PCB

PCB

Features

Two poles wired in series to break or switch 600 to 1,000 Vdc.

Ambient temperature up to +85°C at 35A. Meet VDE 0126-1-1 & IEC 62109-2.

Product in accordance to IEC 60335-1

Latching with 1 or 2 coils

Ambient temperature +105°C

Voltage

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Displays

Technologies

OLED & TFT

LCD, OLED & TFT

LCD & TFT

LCD & TFT

Touchscreen

RTP & CTP

RTP & CTP

RTP & CTP

CTP

Coverglass Interface Boards Full Solution

• All our manufacturing partners are able to offer both standard and bespoke solutions, offering “plug and play” functionality.

• Coverglass can be supplied with IK rated glass, AR and AG coatings, custom ceramic printing and full UV Protection by request

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Power Supplies

48000 Series 1W-3W

47000 Series 2.5W-10W

47000 Series 20W-60W

49000 Series 2.5W-10W

Dimensions

25 × 25 × 16mm

32.3 × 27.3 × 21.8mm 41 × 35 × 24.5mm 48 × 40 × 26mm

65 × 35 × 24.5mm 81 × 40 × 26.5mm 94.7 × 47.5 × 29.5mm

32.3 × 27.3 × 21.8mm

Input Range

85-265Vac, 120-370Vdc

85-265Vac, 120-370Vdc

85-265Vac, 120-370Vdc

85-265Vac, 120-370Vdc

Output

3.3V, 5V, 9V, 12V, 15V, 18V & 24V

3.3V, 5V, 9V, 12V, 15V, 18V & 24V

3.3V, 5V, 9V, 12V, 15V, 18V & 24V

3.3V, 5V, 9V, 12V, 15V, 18V, 24V & 30V

Power

1W, 2.5W, 2.75W & 3W

2.5W, 2.75W, 4.5W, 5W, 7.5W & 10W

15W, 20W, 30W, 36W 40W, 50W & 60W

2W, 2.75W, 3W, 5W & 10W

Current

42mA ~ 830mA

110mA ~ 3A

840mA ~ 10A

84mA ~ 3A

Min-Max Tamb (°C)

-25°C ~ +80°C

-25°C ~ +70°C

-25°C ~ +60°C (+70°C)

-25°C ~ +85°C

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Power Supplies

LD05-23BxxR2

LD10-23BxxR2

LD15-23BxxR2

LD20-23BxxR2

Dimensions

25.4 × 25.4 × 17.6mm (1” x 1”)

40 × 25.4 × 21mm

47.6 × 26.8 × 23.5mm

52.4 × 27.2 × 24mm

Input Range

85-305Vac, 100-430Vdc

85-305Vac, 100-430Vdc

85-305Vac, 100-430Vdc

85-305Vac, 100-430Vdc

Output

3.3V ~ 24V

3.3V ~24V

3.3V ~ 24V

3.3V ~ 24V

Power

5W

8.6W & 10W

13.2W & 15W

14.85W & 20W

Current

208mA ~ 1.515A

410mA ~ 2.6A

625mA ~ 4A

830mA ~ 4.5A

Min-Max Tamb (°C)

-40°C ~ +85°C

-40°C ~ +85°C

-40°C ~ +85°C

-40°C ~ +85°C

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Power Supplies

LD30-23BxxR2

LD60-23BxxR2 LD90-23BxxR2

LOF120-20Bxx

LOF225-20Bxx

Dimensions

69.5 × 39 × 24mm

70 × 48 × 27mm 87 × 52 × 29.5mm

76.2 × 50.8 × 31mm (3” × 2” × 1.22”)

101.6 × 50.8 × 25.4mm (4” × 2” × 1”)

Input Range

85-305Vac, 100-430Vdc

85-305Vac, 100-430Vdc 80-305Vac, 110-430Vdc

85-264Vac, 120-370Vdc

85-264Vac, 120-370Vdc

Output

3.3V ~ 48V

5V ~ 48V

12V ~ 54V

12V ~ 54V

Power

19.8W ~ 31.2W

50W ~ 90W

114W, 119.7W, 119.9W & 120W

225W

Current

630mA ~ 6A

1.25A ~ 10A

2.22A ~ 9.5A

4.17A ~ 18.75A

Min-Max Tamb (°C)

-40°C ~ +85°C

-40°C ~ +85°C

-40°C ~ +85°C

-40°C~ +70°C

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Residual Current Monitors (RCM’s) Enclosure style:

RCM-EV-** Part No’s IC-CPD (In Charging Cables) 5 Mode 2 Wallboxes/Charging Station 5 Mode 3

01

02

RCM-EV-** 034

044

06

RCM-EV-** 08

09

RCM-EV-** 11

05

07

6mA DC detection 20mA AC detection 3 30mA AC detection PCB mounting

1

1

Direct to cable mounting

2

2

Integrated load wires • 1 /P suffix added to part number (denotes pins exiting at the base of the housing) • 2 /S suffix added to part number (denotes pluggable/latching connector) • 3 UL 2231-2 compliant.

• 4 Version also available of these variants providing both 6mA DC and 20mA AC detection and UL 2231-2 compliant. /UL suffix added to part number • 5 Suitable for both electric vehicles (EV) and plug-in hybrid electric vehicles (PHEV)

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Smart Control Modules

TLB6-A1PV

TLB6-A1SVE

TLB6-A1TDM

IC-CPD (In Charging Cables) Mode 2

Earth Leakage Protection Type A

Earth Leakage Protection Type B

Wallboxes/Charging Station Mode 3

• Programmable adjustments using NFC option

• 35mm cable aperture

6mA DC detection

• Combined Test/Reset button with option to connect remote button

20mA AC detection 3

• LED indication of leakage current, device status and general status information

30mA AC detection PCB mounting

• 2 Relay outputs (SPDT) – Relay 1 and Relay 2 (User configurable) • DIN rail mounting • Key Standards: IEC 60947-2

Direct to cable mounting

(Annex M) and IEC 60755

• Combined Test/Reset button with option to connect remote button • Multi-colour LED providing operation, error and general status information • 2 Relay outputs (SPDT) – Relay 1 and Relay 2 (User configurable) • Universal mounting options – DIN rail or surface mounting • Key Standards: IEC 60947-2 (Annex M) and IEC 60755

Integrated load wires

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Cellular & IoT Connectivity Modules

xE310

xL865

eX910

LGA Modules

mPCIe

xN

SE

mPCIe Data Cards

m.2 Data Card

Smart Modules

Adapter Cards

Adapter Cards

System on Module

Product Types

Cellular LPWAN LTE-M, NB-IoT

Ultra Compact

Compact

ME310M1* ME310G1 ME310L2

ML865G1 ML865C1

Advacned

ME910 mPCIe

Performance IoT LTE Cat 1, Cat 4

LE910C4 LE910C1 LE910R1

LE910 mPCIe

LTE Broadband LTE Cat 5 to Cat 16

ME910M1* ME910C1 ME910G1

LM960A18

5G Broadband 5G eMBB

Easby Electronics - EV Charging

SE250B4 SE150A4

LN920

FN990 FN980

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Wi-Fi & Bluetooth (BLE) Modules Bluetooth (BLE)

Wi-Fi

WE310F5

WE866C6-P

WE310G4

BlueMod+S50

Key Features

Wi-Fi 802.11 b/g/n 2.4GHz Bluetooth® Low Energy 5.0 Wi-Fi AP/STA/Concurrent Bluetooth® Low Energy Central/ Peripheral/Concurrent Built-in Wi-Fi/Bluetooth® coexistence Host Interfaces: UART, SPI, SDIO, USB

Wi-Fi 802.11 a/b/g/n 2.4 GHz and 5 GHz (20, 40, 80 MHz) Bluetooth®/Bluetooth® Low Energy 5.0 Wi-Fi AP/STA/concurrent Bluetooth®Low Energy central/ peripheral Integrated LTE-Wi-Fi/Bluetooth® coexistence filter Built-in Wi-Fi/Bluetooth® coexistence Host interfaces: SDIO 3.0 (Wi-Fi), UART (Bluetooth®), PCM/I2S (Bluetooth® Audio)

Wi-Fi 802.11 a/b/g/n 2.4 GHz and 5 GHz Bluetooth® Low Power 5.0 Wi-Fi AP/STA/concurrent Bluetooth® central/peripheral/ concurrent Built-in Wi-Fi/Bluetooth® coexistence Host interfaces: UART, SPI, SDIO, USB

Bluetooth® Low Energy 5.0 Host interfaces: UART Other interfaces: I2C, SPI, PWM, ADC GPIOs: Up to 21

Certifications

FCC/IC/RED/RCM/JATE-JBL/TELEC-JRL/ NCC/ANATEL/SRRC/WPC-ETA/KCC/ UKCA WiFi Alliance Bluetooth® SIG

FCC, ISED, RED, JATE-JTBL, TELEC-JRL, Anatel, WPC-ETA Wi-Fi Alliance BT SIG

FCC/ISED/RED Wi-Fi Alliance Bluetooth® SIG

FCC/ISED/RED/ANATEL/SRRC/WPC/ TELE-JRL/KCC

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Modems, Routers & Cellular Network Analysers Modems

SL500-LTEM

Overview

Dimensions

Network Analysers

Routers

ZETA-NLP-LTEM (GL)

QUARTZ-COMPACT

The SL500-LTEM modem is a The ZETA-NLP-LTEM is a cutting The QUARTZ-COMPACT-LTE low power LTE Cat M1 / NB1 edge, low power industrial router is an ultra compact, modem, used to create a modem. It will connect to high speed industrial router data connection over the LTE global LTE Cat M1 & NB1 designed for transferring large cellular network linking remote networks & existing global 2G / amounts of data via the cellular applications with a server.

GSM cellular networks. network.

QUARTZ-GOLD

SNYPER-LTE Graphyte

The QUARTZ-GOLD router is a high speed dual port gigabit ethernet industrial router designed for transferring large amounts of data via the LTE cellular network.

The SNYPER-LTE Graphyte is a high performance, network signal analyser & cellular signal logger, covering the 4G/ LTE (EU), 3G/UMTS & 2G/GSM European networks.

93mm x 67mm x 28mm

93mm x 67mm x 28mm

78.5mm x 68.2mm x 25 mm

103mm x 73.5mm x 23.5mm

141mm x 76mm x 36mm

Weight

90 grams

90 grams

67mm

67mm

67mm

Operating temperature

-40 to +85°C

-40 to +85°C

-30 to 70°C

-30 to 75°C

-10 to +50°C

<95% (non-condensing)

<95% (non-condensing)

<95% (non-condensing)

<95% (non-condensing)

<85% (non-condensing)

CE, RoHS

CE, RoHS

CE, RoHS, CCC

CE, RoHS, CCC

CE, RoHS

Relative humidity Certification

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Antennas

2J Antennas

Bloomice

Siretta

TE

Mounting PCB, Embedded, External Cellular 2G-5G Wifi Bluetooth, Zigbee, WLAN, ISM

GNSS, GPRS, GPS

Signal Strength, Cellular Network Analyser

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Microcontrollers

8-Bit

Cortex-M0+ 32-Bit

Cortex-M3 32-Bit

Frequency

20MHz

48 ~ 60MHz

72 ~ 96MHz

Voltage VDD

1.8V ~ 5.5V

1.6V ~ 3.6V

1.6V ~ 3.6V

Flash memory

2K × 16 ~ 64K × 16

32 ~ 256MB

64 ~ 256MB

SRAM

128 ~ 4096

4 ~ 32MB

16 ~ 128MB

EEPROM

64 ~ 2048

Interfaces

SPI, I2C, SPIA, UART

SDIO, USART, UART, SPI, QSPI, I2C

USART, UART, SPI, QSPI, I2C

22 ~ 58

24 ~ 67

37 ~ 80

16NSOP 20/24/28SOP/SSOP 48/64LQFP

33/46QFN 48/64/80LQFP

40/46QFN 48/64/100LQFP

I/Os Packages

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

DC-DC Converters Asynchronous Step-Down Part Number

Asynchronous Step-Up

Synchronous Step-Down

Synchronous Step-Up

Charge Pump

HT7463A

HT7463B

HT74153

HT77xxC

HT7991

HT77xxFA

HT79181

HT7660

52V

52V

6V

0.7V ~ 6.0V

2.6V ~ 5.5V

0.7V ~ 6.0V

2.2V ~ 5.0V

3V ~ 12V

Output Voltage

1.0V~ 36V

1.0V ~ 36V

0.6V ~ 6V

1.8V ~ 5.0V

3.0V ~ 12.0V

2.7V ~ 5.0V

2.6V~5.2V

-VDD ~ VDD

Output Current

0.6A

0.6A

2.0A

External

1.0A

0.2A

3.0A

20mA

1250kHz

550kHz

1200kHz

115kHz

1000kHz

500kHz

10kHz

1.0A

1.0A

3.2A

2.5A

6.0A

0.794V±2.0%

0.794V±2.0%

0.6V±1.5%

VOUT±2.5%

0.6V±2.0%

VOUT±2%

0.6V±1.5%

Shutdown Current, IOFF

1.0µA

1.0µA

0.5µA

1.0µA

1.0µA

1.0µA

1.0µA

Operation Current, IQ

0.7mA

0.7mA

0.05mA

4µA

210µA

4µA

65µA

0.08mA

Efficiency

95%

95%

95%

80%

80%

90%

95%

98%

Mode

PWM/PSM

PWM/PSM

PWM/PSM

PFM

PWM

PFM

PWM/PSM

N/A

Package

SOT23-6

SOT23-6

8SOP-EP/SOT23-5

SOT23-5, SOT89

SOT23-6

SOT23, SOT23-5, SOT89

10QFN

8 DIP/SOP

Max.Input Voltage

Switching Frequency Current Limit Accuracy

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

VOUT±4.0%

+44 (0) 1748 850 555

OP AMPS - General Purpose

Quad Micropower

TinyPower™ Single

TinyPower™ Dual

TinyPower™ Quad

Rail to Rail

Rail to Rail

HT9274

HT9291

HT9292

HT9294

HT92232

HT92252

OP No.

4

1

2

4

2

2

VDD

1.6V ~ 5.5V

1.4V ~ 5.5V

1.4V ~ 5.5V

1.4V ~ 5.5V

2.1V ~ 5.5V

2.1V ~ 5.5V

BW

100kHz

11kHz

11kHz

11kHz

300kHz

1MHz

Current/OP

3.0µA

0.6µA

0.6µA

0.6µA

16µA

40µA

Package

14SOP

SOT23-5

8SOP

14SOP

8SOP

8SOP

Part Number

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

OP AMPS - Precision/ Low Power

Precision Dual

Precision Dual

Low Power Dual

Low Power Dual

HT92632

HT92652

HT92112

HT92122

OP No.

2

2

2

2

VDD

2.0V ~ 5.5V

2.0V ~ 5.5V

1.4V ~ 5.5V

1.4V ~ 5.5V

BW

11kHz

11kHz

300kHz

1MHz

Current/OP

0.6µA

0.6µA

16µA

40µA

Package

8SOP

14SOP

8SOP

8SOP

Part Number

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

RF Modules Sub 1GHz Receiver Modules

Sub 1GHz Transceivers Modules

RFM69CW

RFM22BW

RFM23BW

RFM300HW

RFM65CW

RFM219BW

RFM210LH-DW

315,433, 868 & 915MHz

315,433, 868 & 915MHz

315,433, 868 & 915MHz

433, 868 & 915MHz

315, 433, 868 & 915MHz

127 to 1020MHz

315 & 433.92MHz

FSK, GFSK, MSK, GMSK & OOK

FSK, GFSK & OOK

FSK, GFSK & OOK

FSK, GFSK & OOK

FSK, GFSK, MSK, GMSK & OOK

OOK, (G)FSK & (G)MSK

OOK

+13dBm

+20dBm

+13dBm

+20dBm

Sensitivity

-120dBm at 1.2kbps

–121dBm

–121dBm

-120dBm

-120dBm

-120dBm

-109dBm

Pack Engine

CRC-16, AES-128, 66-byte FIFO

CRC, 64 byte FIFOs

64 byte TX/RX FIFOs

Configurable packet handler & 64-Byte FIFO

CRC, AES-128 encryption & 66byte FIFO

Configurable packet processor & 64-Byte FIFO

Power Supply

1.8V ~ 3.6V

1.8V ~ 3.6V

1.8V ~ 3.6V

1.8V ~ 3.6V

1.8V ~ 3.6V

1.8V ~ 3.6V

3.0V ~ 5.5V

Module Size

16 × 16mm

14-PIN DIP, 16-PIN

14-PIN, 16-PIN

16 × 16 × 1.8mm

19.7 × 16 × 1.9mm

16 × 16mm

43.2 × 11.5mm

Frequency Range Modulation Out Put Power

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

RF Modules Sub 1GHz Transmitter

Wi-Fi Module

BLE Module

RFM119W

RFM43BW

RFM119BW

HM-WF8720

HM-BT220X

Frequency Range

240 to 960MHz

433, 868 & 915MHZ

315, 433.92, 868.35 & 915MHz

802.11n Wi-Fi 2.4GHz RF trans

BLE 2.4GHz multi protocol

Modulation

(G)FSK & OOK

FSK, GFSK & OOK

(G)FSK & OOK

Out Put Power

-10 ~ +13dBm

–8 ~ +13dBm

-10 ~ +13dBm

+6dBm

Sensitivity

98.9dBm

Pack Engine

IPv4, TCP, UDP, SSL, HTTP, MQTT, CoAP & BLE Mesh

BLE 5.2

Power Supply

1.8V ~ 3.6V

1.8V ~ 3.6V

1.8V ~ 3.6V

2.5V ~ 3.6V

1.71V ~ 3.8V

Module Size

17.8 × 12.8mm

14-PIN & 16-PIN

15 × 14.5mm

20.5 × 15.0mm

17.0 × 12.0mm

sales@easby.com

www.easby.com

Easby Electronics - EV Charging

+44 (0) 1748 850 555

Sensors Temperature Sensor

Humidity & Temperature Sensors

TH09C (Chip)

TH06 (Module)

BM25S2021-1

T09

Relative Humidity

0% to 85%, ±2.0%RH

±5%RH (max), 0–80%RH

10%RH ~ 95%RH

N/A

RH operating range

0 – 100 %RH

0 ~ 100%RH

10% ~ 95%RH

N/A

-40°C to +100 °C

–10°C ~ +85°C

-40°C ~ +80°C

-10°C ~ +65°C

I2C

I2C

I2C/One-Wire

Power Consumption

6.6µA @ 1Hz (1.8V) active current 40 nA standby current

150 µA active current 60 nA standby current

< 2.5mA active Current < 3µA standby Current

6 µA active @4Hz 0.1 µA @ Standby

Temperature Range

-40°C to +100 °C

-40°C ~ +125°C

-40°C ~ +80°C

0°C ~ +125 °C

Voltage

1.71V ~ 3.6V

1.9V ~ 3.6V

2.7V ~ 5.5V

1.71V ~ 3.6V

Package

2.0 x 2.0 x 0.75mm

9.1 × 10.8mm SMT

15.13 × 12.13 × 5.8mm

1.5 × 1mm WLCSP

Temperature Interface

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Holtek Power, Real Time Clocks and NFC LDOs Maximum Input Voltage

Output Voltage

Max. Output Current

Typical Current Consumption

Chip Enable Function

Tolerances

Package Range

6.6V ~ 40V

0.9V ~ 12.0V

Up to 500mA

1uA ~ 4uA

Yes

±1% ±3%

4DFN, SOT23, SOT23-5, SOT89, SOT89-5 & 8SOP-EP

AC-DC Convertors Part No.

Topology

HT7A6312

Flyback (SSR), Buck, BuckBoost

HT7A6322 HT7L5820 HT7L5821

Flyback (PFC+QR PWM)

PF

Power Input MOS 730V

9V ~ 38V

> 0.97 Ext.

9V ~ 28V

RDS(ON) 19Ω 12Ω

Operation Typical Current Power 0.7mA

3mA

8W/13W# 12W/20W#

Frequency Protections

Package

60kHz

8DIP/SOP

UVLO, OTP, OVP & OCP Brown In/Out, UVLO, OCP, open/short, OVP & OTP (AutoRecovery)

200W

Brown In/Out, UVLO, OCP, open/short, OVP & OTP (Latched)

16NSOP

Real Time Clock Timepieces Part No.

VDD

VBAT

HT1380A

2.0V ~ 5.5V

HT1381A

2.0V ~ 5.5V

HT1382

2.7V ~ 5.5V

ISTB (µA)

External Xtal Oscillator

1.0 at 5V

0.1

32.768kHz

8DIP

1.0 at 5V

0.1

32.768kHz

8SOP

0.1

32.768kHz

IDD (µA)

2.0V ~ 5.5V

15 at 3V

IBAT (µA)

1.2 at 3V

Build in Oscillator Memory (Bytes) Compensation

4

√

Package

8SOP 10MSOP

NFC Reader Part No.

VDD

System Clock

RF Frequency

NFC Standards

RF Data Rate

RF Output Current

NFC FIFObuffer

CRC

Receiver VDDIO AGC

Interface

Package

BC45B4523

2.7V ~ 5.5V

27.12MHz

13.56MHz

ISO14443A/ BISO15693

106/212/424/848Kbps @ ISO14443A/B

250mA

64×8

√

√

SPI×1

24QFN

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

√

+44 (0) 1748 850 555

Semiconductors

TVS Diode

Super Junction MOSFET

Ultra Fast Rectifier

1A Low Dropout Positive Voltage Regulator

Series

TLD5S series

TSM60 Series

UGF10 Series

TS117 Series

Package Options

DO-218AB

ITO-220 TO-251 (I-PAK) TO-252 (D-PAK) TO-263-2L (D2PAK-2L)

Available in ITO-220AC & ITO220AB packages

SOT-223 & TO-252 (D-PAK)

Peak Impulse Power Dissipation:

Drain Source Voltage:

3600W Pppm

Additional info

Working Stand-off Voltage: VWM 10V ~ 43V

Breakdown Voltage: VBR 11.1V ~ 52.8V

Easby Electronics - EV Charging

VDS 600V

Gate Source Voltage: VGS ±(V) 20 ~ 30

Continuous Drain Current:

Forward Current: 10A 200V ~ 600V

Reverse Recovery Time: 20 ~ 25ns

ID Max. (A) 3~ 28

sales@easby.com

www.easby.com

Input Supply Voltage: 15V

Output Voltage: 1.2V, 1.5V 2.5V, 3.3V & 5.0V

+44 (0) 1748 850 555

Terminal Blocks

Type

Amperage

Pitch

15EDGRC

15EDGK

DG636-9.52

DG136T-10.16

DS4-TW

Socket

Plug

Terminal Block

Terminal Block

DIN-Rail Block

8A

8A

32A

65A

32A

3.5 & 3.81mm

3.5 & 3.81mm

6.35, 7.62 & 9.52mm

10.16 & 12.7mm

Rising Clamp

Rising Clamp

Rising Clamp

Push-In

PCB

PCB

DIN-Rail

Cage

Mounting

PCB

Features

Also available vertical.

Mates with 15EDGK

Easby Electronics - EV Charging

Mates with 15EDGRC

Also available in different colours

sales@easby.com

Also available in different colours & current ratings

www.easby.com

+44 (0) 1748 850 555

Connectors

Dynamic Series

MicroMaTch

Elcon Mini

IDC

Amperage Max

3~65A

1.5A

40A

3A

Voltage max

250 ~ 630Vac

230Vac

500Vac/DC

125AC/DC

Temperature

-55°C ~ +105°C

-40°C ~ +125°C

-40°C ~ +125°C

-40°C ~ +105°C

2 to 48

4 to 24

2, 3 & 4

6 to 64

Wire to Board

Wire to Board

Wire to Board

Wire to Board

Wire to Wire

Board to Board

Wire to Wire

Wire to Wire

Rugged Power & Signal Interconnect System

1.27mm Interconnect System UL Certification

Up to 40A per contact.

Positive metal latch assemblies available

1.27 & 2.54mm Interconnect System Conventional and SMD UL Certification

Positions

Mounting

Features

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Switches

Pushbutton Switches

Micro Switches

Detection Switches

DIP Switches

Sizes

19 ~ 22mm

Various

Various

1.27mm, 2.54mm

Current

10mA ~ 10A

1mA ~ 21A

0.1mA ~ 10A

25mA ~ 0.1A

Voltage

12 ~ 28VDC, 250VAC

0.25 ~ 30VDC, 125 ~ 250VAC,

5VDC ~ 30VDC

250 ~ 500VAC 1 Min

IP Rating

up to IP67

IP40 to IP6X

Up to IP40

Up to IP64

Operation

Momentary maintained, latching

SPDT, SPST N/O and N/C

SPDT, SPST N/O and N/C

BCD Decimal/Hexdecimal 4x1, 3x3, ON/OFF

Features

Stainless Steel vandal Resistant Solid or Illuminated

Miniature, Sub & Ultra Subminature, Sealed

Conventional, SMD, range of actuators

Rotary, Piano, Slide, Conventional, SMD

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

Passive

Series

Operating Temperature

PCB Mounted DC Link Capacitors

Class X2 Capacitors

Metal Oxide Varistor

RGB Full Color & BiColor SMD LEDs

C95 Series

C42 Series

SVC Series

ZMEDGCBD45S

-40oC ~ +105oC

-40oC ~ +110oC

-25oC ~ +85°C

-40oC ~ +85oC

High Discharge Capability up to 4000 Amps

Emitting Colour:

Voltage:

Additional info

500V ~ 1200Vdc

Voltage Proof:

Capacitance Range: 0.0010µF ~ 25.0µF

Excellent Clamping Characteristics

1.5Un (10s)

Easby Electronics - EV Charging

Response time of under 50ns UL, CA, & VDE approved

sales@easby.com

www.easby.com

Red, Green, Blue

Viewing Angle: 120o

+44 (0) 1748 850 555

Resistors

LR12

Aluminum Power

Power Ribbon

AS

LR

PDM

QL/QR/QRZG

0402 ~ 2512

0402 ~ 2512

2512

Chassis Mount

Various Options

2W ~ 6W

1/8W ~ 1W

1/8W ~ 2W

1W ~ 3W

5W ~ 100W

20W ~ 2500W

0.01R ~ 10M

1R ~ 10M

10mR ~ 1R

1R ~ 10M

1mR ~ 220mR

0.01R ~ 35K

0.1R ~ 200K

Tolerance

1% & 5%

1% & 5%

1% & 5%

5% & 10%

1% & 5%

5% & 10%

5% & 10%

TCR/PPM

+800 ~ +100

+200 ~ +100

+1500 ~ +100

+400 ~ +100

+50

+400 ~ +350

+400 ~ +350

Additional Features

AEC-Q200 compliant

AEC-Q200 compliant

AEC-Q200 compliant

AEC-Q200 compliant

Metal Strip

Excellent Heat Dissipation

Suitable for High Power Load

High Power

Ultra High Power

Current Sense

Anti-Surge

HP

SP

CS

Package Options

0402 ~ 2512

2010 ~ 4527

Power Rating

1/10W ~ 2W

Resistance Range

Series

Easby Electronics - EV Charging

sales@easby.com

www.easby.com

+44 (0) 1748 850 555

sales@easby.com www.easby.com +44 (0) 1748 850 555

Scan me!

Please use your smart phone or tablet to scan the code and learn more about our EV component offerings.

Your “One Stop Shop” for all your EV requirements.