EAO Series 51

EAO – Your Expert Partner for Human Machine Interfaces

EAO Product Information Series 51

Switches and Indicators

51

Contents

51

Description ...................................................................................................... 3

Product Assembly .......................................................................................... 4

Devices raised mounting ............................................................................... 7

Devices flush mounting ............................................................................... 13

Accessories................................................................................................... 21

Technical Data............................................................................................... 33

Typical Applications ..................................................................................... 36

Application guidelines.................................................................................. 37

Marking .......................................................................................................... 38

Drawings........................................................................................................ 40

Index............................................................................................................... 58

2 01.2010

51

Description Specimen order

Product Information General notes The illuminated pushbuttons of series 51 with hoseproof front (IP 65) can be supplied with snap-action or low-level switching elements. The equipment (switches) for raised mounting are protected against accidental operation by the extended sides of the bezel. Flush mounting equipment excells with best available ergonomy and low down hight.

To supplement the range of illuminated pushbuttons, we can offer a hoseproof safety keylock switch with various lock numbers.

Mounting All switch actuators are mounted from the front by pushing them through the mounting hole in the front panel. They are then fixed from the back with a fixing nut and the mounting tool Typ-Nr. 01-907. Max. tightening torque 50 Ncm. For switching elements we offer plug-in bases, which when soldered to a PCB enable a plug-in connection to the button. The rectangular actuators for raised are provided with an anti-twisting device.

0

Indicator : -

Indicator actuator, 18 x 24 mm, soldering terminal

31-040.005

Essential accessories : -

Lens plastic blue, transparent, flush, 18 x 24 mm

31-903.6

-

Single-LED, T1 3/4 MG, 24 VAC/DC, blau

10-2J12.1066

We reserve the right to modify technical data All dimensions in mm

Lenses The flat or concave lenses are available in various colours, as well as translucent or transparent. Round lenses for flush mounting equipment are available in aluminium also.

Because of production related reasons, the colours of anodized aluminium parts can vary slightly.

Marking For further information about engraving, hot stamping and film inserts see part Marking.

Illumination The T1 3/4 Midget Groove incandescent (filament) lamp (6 ... 48 V) ensures perfect illumination of the lenses, which are supplied in various colours.

T1 3/4 Midget Groove Single-LED (6, 12, 24, 28, 48 V) are also available in blue, green, red, white or yellow.

Luminosity and wave length scattering caused by technologie used in the LED manufacturing processes may lead to visual differences in our products.

For supply voltages above 48 V, it is necessary to use a voltage reduction element (external series resistor or transformer).

Position indication The status of a maintained action switch can be determinded by the position of the lens.

Keylock switch Standard lock (Index D). Standard lock number is 311. If the lock number is not specified, we will supply standard number 311.

An additional 134 special locks (Index X) are available on request.

Master keys for lock numbers 311 ... 445 may be ordered by quoting Typ-Nr. 31-989.300. Two keys are supplied with each keylock switch.

Spare keys (Index D) for standard locks may be ordered by quoting Typ-Nr. 31-989.xxx (please state the lock number).

3 01.2010

51

Product Assembly Indicator round, raised mounting 0

1

2

1 2 3 4 5 6

Lens LED Indicator housing Sealing Front plate Fixing nut

1 2 3 4 5 6

Lens LED Switch housing Sealing Front plate Fixing nut

3

4 5

6

Illuminated pushbutton, raised mounting 0

1

2

3

4

5

6

4 01.2010

51

Product Assembly Keylock switch round, flush mounting 0

1

1 2 3 4 5 6 7 8

Actuator housing Front bezel Sealing Front plate Anti-twist ring Thrust piece Fixing nut Switching element

2

3

4 5

6

7

8

5 01.2010

51

Product Assembly Selector switch square, flush mounting 0

1

2

3

4

5

6

7

8

6 01.2010

1 2 3 4 5 6 7 8

Actuator housing LED Actuator housing Front bezel Sealing Front plate Fixing bracket Fixing nut

51

Devices raised mounting Indicator actuator

Essential Accessories: d Lens plastic, raised mounting page 21

d

Single-LED page 30

4 4

4

Circuit drawing

Ă˜ 18 mm Typ-Nr. 51-741.006 51-742.006 51-030.005 51-030.002 51-031.006

Technical drawing

UT UT S S1 UT

a 18 x 24 mm Typ-Nr. 51-701.006 51-702.006 51-040.005 51-040.002 51-041.006

Mounting dimensions

1D 2D -

b 18 x 18 mm Typ-Nr. 51-703.006 51-704.006 51-050.005 51-050.002 51-051.006

Component layout

IP 65

Terminals

Diode (1N 4007)

Indicator actuator

Front protection

Continuation see next page

e

1 1 1 1 1

12 12 12 12 12

78 79 1 1 1

0.006 0.006 0.004 0.004 0.005

Indicators fit also in mounting hole no. 2 Diode (1N 4007): D = Diode, - = without Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 40, Mounting dimensions from page 41, Technical drawing from page 42, Circuit drawing from page 47

7 01.2010

51

Devices raised mounting Illuminated pushbutton actuator

Essential Accessories: d Lens plastic, raised mounting page 21

d

Single-LED page 30

-

1 NO

-

2 NC

-

2 NO

-

1 NC + 1 NO

1D 2D -

M 2 NC + 2 NO

1D 2D -

3 NC + 3 NO

-

4 NC + 4 NO

-

MA M MA M MA M MA M MA M

Component layout

Terminals UT UT UT UT UT UT UT UT UT UT H H H H S S1 S S1 H H H H S S S S S S

Ă˜ 18 mm Typ-Nr. 51-476.036 51-436.036 51-473.036 51-433.036 51-475.036 51-435.036 51-472.036 51-432.036 51-471.036 51-431.036 51-747.0292 51-743.0292 51-748.0292 51-744.0292 51-271.0252 51-271.022 51-131.0252 51-131.022 51-749.0292 51-745.0292 51-750.0292 51-746.0292 51-272.0252 51-132.0252 51-273.0252 51-133.0252 51-274.0252 51-134.0252

4 4 4 4 4 4 4 4 4 4

Circuit drawing

1 NC + 1 NO

MA M MA M MA M MA M MA M MA M MA M MA

a 18 x 24 mm Typ-Nr. 51-466.036 51-426.036 51-463.036 51-423.036 51-465.036 51-425.036 51-462.036 51-422.036 51-461.036 51-421.036 51-713.0292 51-705.0292 51-714.0292 51-706.0292 51-261.0252 51-261.022 51-121.0252 51-121.022 51-715.0292 51-707.0292 51-716.0292 51-708.0292 51-262.0252 51-122.0252 51-263.0252 51-123.0252 51-264.0252 51-124.0252

Technical drawing

-

b 18 x 18 mm Typ-Nr. 51-486.036 51-456.036 51-483.036 51-453.036 51-485.036 51-455.036 51-482.036 51-452.036 51-481.036 51-451.036 51-717.0292 51-709.0292 51-718.0292 51-710.0292 51-281.0252 51-281.022 51-151.0252 51-151.022 51-719.0292 51-711.0292 51-720.0292 51-712.0292 51-282.0252 51-152.0252 51-283.0252 51-153.0252 51-284.0252 51-154.0252

Mounting dimensions

SA

1 NC

Switching action

LL

Diode (1N 4007)

IP 65

Contacts

Switching system

Illuminated pushbutton actuator

Front protection

Continuation see next page

e

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13

11 57 14 60 13 59 12 58 15 61 8 54 9 55 10 7 56 53 4 50 5 51 6 52 3 49 2 48

0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.008 0.008 0.008 0.008 0.006 0.006 0.006 0.006 0.010 0.010 0.010 0.010 0.008 0.008 0.010 0.010 0.012 0.012

Illuminated pushbutton fit also in mounting hole no. 2 Switching system: LL = Low level switching element, SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Diode (1N 4007): - = without, D = Diode Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, H = Combined terminal: Solder-/ Universal (at contact/ at diode), S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 40, Mounting dimensions from page 41, Technical drawing from page 42, Circuit drawing from page 47

8 01.2010

51

Devices raised mounting Keylock switch 2 positions

Ă˜ 18 mm Typ-Nr. 51-415.036D 51-418.036D 51-412.036D 51-414.036D 51-417.036D 51-411.036D 51-235.025D2 51-335.025D2 51-135.025D2 51-235.022D 51-335.022D 51-135.022D 51-236.025D2 51-336.025D2 51-136.025D2 51-237.025D2 51-337.025D2 51-137.025D2 51-238.025D2 51-338.025D2 51-138.025D2 51-438.036D 51-437.036D 51-141.025D2 51-141.022D 51-142.025D2 51-143.025D2 51-144.025D2

4 4 4 4 4 4

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 4 2 4 2 2 2 2 2 2

Circuit drawing

a 18 x 24 mm Typ-Nr. 51-405.036D 51-408.036D 51-402.036D 51-404.036D 51-407.036D 51-401.036D 51-295.025D2 51-395.025D2 51-195.025D2 51-295.022D 51-395.022D 51-195.022D 51-296.025D2 51-396.025D2 51-196.025D2 51-297.025D2 51-397.025D2 51-197.025D2 51-298.025D2 51-398.025D2 51-198.025D2 51-428.036D 51-427.036D 51-495.025D2 51-495.022D 51-496.025D2 51-497.025D2 51-498.025D2

Technical drawing

IP 65 LL 1 NC + 1 NO MA UT A C C+A 2 NO MA UT A C C+A SA 1 NC + 1 NO MA S A C C+A S1 A C C+A 2 NC + 2 NO MA S A C C+A 3 NC + 3 NO MA S A C C+A 4 NC + 4 NO MA S A C C+A IP 65 LL 1 NC + 1 NO M UT A Position A : Basic position Position C : Momentary action 2 NO M UT A Standard lock 311 SA 1 NC + 1 NO M S A Front : Plastic black S1 A 2 NC + 2 NO M S A 3 NC + 3 NO M S A 4 NC + 4 NO M S A

Keylock switch 2 positions Position A : Basic position Position C : Maintained action Standard lock 311 Front : Plastic black

b 18 x 18 mm Typ-Nr. 51-445.036D 51-448.036D 51-442.036D 51-444.036D 51-447.036D 51-441.036D 51-255.025D2 51-355.025D2 51-155.025D2 51-255.022D 51-355.022D 51-155.022D 51-256.025D2 51-356.025D2 51-156.025D2 51-257.025D2 51-357.025D2 51-157.025D2 51-258.025D2 51-358.025D2 51-158.025D2 51-458.036D 51-457.036D 51-145.025D2 51-145.022D 51-146.025D2 51-147.025D2 51-148.025D2

Component layout Mounting dimensions

Key remove

Terminals

Switching action

Contacts

Switching system

0

Front protection

Continuation see next page

e

14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14

76 76 76 77 77 77 72 72 72 72 72 72 73 73 73 74 74 74 75 75 75 70 71 66 66 67 68 69

0.017 0.017 0.017 0.017 0.017 0.017 0.016 0.016 0.016 0.016 0.016 0.016 0.016 0.016 0.016 0.016 0.016 0.016 0.016 0.016 0.016 0.017 0.017 0.016 0.016 0.016 0.016 0.016

Other lock numbers on request Switching system: LL = Low level switching element, SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 40, Mounting dimensions from page 41, Technical drawing from page 42, Circuit drawing from page 47

9 01.2010

51

Devices raised mounting Keylock switch 3 positions

a 18 x 24 mm Typ-Nr. 51-361.022D 51-363.022D 51-362.022D

Ă˜ 18 mm e Typ-Nr. 51-371.022D 2 1 65 0.025 51-373.022D 2 1 65 0.025 51-372.022D 2 1 65 0.025

51-365.022D 51-366.022D

51-375.022D 2 1 64 0.025 51-376.022D 2 1 64 0.025

51-364.022D

51-374.022D 2 1 63 0.025

51-367.022D 51-368.022D

51-377.022D 2 1 62 0.025 51-378.022D 2 1 62 0.025

Other lock numbers on request Switching system: SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Mounting dimensions from page 41, Technical drawing from page 42, Circuit drawing from page 47

10 01.2010

Circuit drawing

b 18 x 18 mm Typ-Nr. 51-381.022D Keylock switch 3 positions IP 65 SA 2 NC + 2 NO MA-0-MA S1 A Position C : Maintained action C + B 51-383.022D Position A : Basic position C+A+B 51-382.022D Position B : Maintained action Standard lock 311 51-385.022D Position C : Maintained action IP 65 SA 2 NC + 2 NO MA-0-M S1 A Position A : Basic position C + A 51-386.022D Position B : Momentary action Standard lock 311 S1 A 51-384.022D Position C : Momentary action IP 65 SA 2 NC + 2 NO M-0-M Position A : Basic position Position B : Momentary action Standard lock 311 51-387.022D Position C: Momentary action IP 65 SA 2 NC + 2 NO M-0-MA S1 A Position A : Basic position A + B 51-388.022D Position B : Maintained action standard lock 311 0

Mounting dimensions Technical drawing

Key remove

Terminals

Switching action

Contacts

Switching system

Front protection

Continuation see next page

51

Devices raised mounting Selector switch 2 positions illuminative

Essential Accessories: d Lever, raised mounting page 24

d

Single-LED page 30

SA

2 NC + 2 NO

1D 2D 1D 2D -

MA MA MA MA MA M M M M M M M M

Position A : Basic position Position C : Momentary action

IP 65

LL

SA

1D 2D -

M M M M M

3 NC + 3 NO 4 NC + 4 NO 1 NC 1 NC + 1 NO 1 NO 2 NC 2 NO 1 NC + 1 NO

2 NC + 2 NO

3 NC + 3 NO 4 NC + 4 NO

UT UT UT UT UT H H S S1 H H S S S UT UT UT UT UT H H S S1 H H S S S

4 4 4 4 4

4 4 4 4 4

Circuit drawing

MA MA MA MA MA MA MA MA

Technical drawing

Selector switch 2 positions Position A : Basic position Position C : Maintained action

Ă˜ 18 mm Typ-Nr. 52-476.036 52-473.036 52-475.036 52-472.036 52-471.036 52-747.0292 52-748.0292 52-271.0252 52-271.022 52-749.0292 52-750.0292 52-272.0252 52-273.0252 52-274.0252 52-436.036 52-433.036 52-435.036 52-432.036 52-431.036 52-743.0292 52-744.0292 52-131.0252 52-131.022 52-745.0292 52-746.0292 52-132.0252 52-133.0252 52-134.0252

Mounting dimensions

1D 2D -

0

Component layout

1 NC 1 NC + 1 NO 1 NO 2 NC 2 NO 1 NC + 1 NO

Terminals

Switching action

LL

Diode (1N 4007)

Switching system

IP 65

Contacts

Front protection

Continuation see next page

e

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19

43 46 45 44 47 40 41 42 39 36 37 38 35 34 29 32 31 30 33 26 27 28 25 22 23 24 21 20

0.007 0.007 0.007 0.007 0.007 0.008 0.008 0.006 0.006 0.010 0.010 0.006 0.006 0.006 0.007 0.007 0.007 0.007 0.007 0.008 0.008 0.006 0.006 0.010 0.010 0.006 0.006 0.006

Switching system: LL = Low level switching element, SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Diode (1N 4007): - = without, D = Diode Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, H = Combined terminal: Solder-/ Universal (at contact/ at diode), S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 40, Mounting dimensions from page 41, Technical drawing from page 42, Circuit drawing from page 47

11 01.2010

51

Devices raised mounting Selector switch 3 positions illuminative

Essential Accessories: d Lever, raised mounting page 24

d

Single-LED page 30

Switching action

Terminals

SA

2 NC + 2 NO

MA-0-MA M-0-MA

S1 S1

IP 40

SA

2 NC + 2 NO

MA-0-M M-0-M

S1 S1

52-573.022A 52-572.022A

Switching system: SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Mounting dimensions from page 41, Technical drawing from page 42, Circuit drawing from page 47

12 01.2010

Circuit drawing

Contacts

Selector switch 3 positions Position C : Maintained action Position A : Basic position Position B : Maintained action Position C : Momentary action Position A : Basic position Position B : Momentary action

Technical drawing

Switching system

IP 40

Ă˜ 18 mm Typ-Nr. 52-571.022A 52-574.022A

0

Mounting dimensions

Front protection

Continuation see next page

e

2 2

6 6

19 17

0.015 0.015

2 2

6 6

18 16

0.015 0.015

51

Devices flush mounting Indicator actuator, flush mounting Actuators usable for front dimensions: b 24 x 24 mm | a 24 x 30 mm | 25 mm dia.

Essential Accessories: Front bezel set for Indicators and Illuminated pushbutton, flush mounting page 25

d d d

Lens plastic, flush mounting page 21 Single-LED page 30

Circuit drawing

Typ-Nr. 51-050.005F 51-050.002F 51-051.006F

Technical drawing

S S1 UT

Mounting dimensions

IP 65

Component layout

Indicator actuator, flush mounting

Terminals

Front protection

Continuation see next page

e

4

3 3 3

15 15 15

1 1 1

0.004 0.004 0.005

Terminals: S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm), UT = Universal terminal Component layout from page 40, Mounting dimensions from page 41, Technical drawing from page 42, Circuit drawing from page 47

13 01.2010

51

Devices flush mounting Illuminated pushbutton actuator, flush mounting Actuators usable for front dimensions: b 24 x 24 mm | a 24 x 30 mm | 25 mm dia.

Essential Accessories: Front bezel set for Indicators and Illuminated pushbutton, flush mounting page 25

d d d

Lens plastic, flush mounting page 21 Single-LED page 30

2 NC 2 NO SA

1 NC + 1 NO

M 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO

MA M MA M MA M

Component layout

Typ-Nr. 51-486.036F 51-456.036F 51-483.036F 51-453.036F 51-485.036F 51-455.036F 51-482.036F 51-452.036F 51-481.036F 51-451.036F 51-281.0252F 51-281.022F 51-151.0252F 51-151.022F 51-282.0252F 51-152.0252F 51-283.0252F 51-153.0252F 51-284.0252F 51-154.0252F

4 4 4 4 4 4 4 4 4 4

Circuit drawing

1 NO

UT UT UT UT UT UT UT UT UT UT S S1 S S1 S S S S S S

Technical drawing

1 NC + 1 NO

MA M MA M MA M MA M MA M MA

Mounting dimensions

1 NC

Terminals

LL

Switching action

IP 65

Contacts

Switching system

Illuminated pushbutton actuator, flush mounting

Front protection

Continuation see next page

e

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16

11 57 14 60 13 59 12 58 15 61 10 7 56 53 6 52 3 49 2 48

0.006 0.006 0.006 0.006 0.006 0.006 0.006 0.006 0.006 0.006 0.005 0.007 0.005 0.007 0.008 0.008 0.010 0.010 0.012 0.012

Switching system: LL = Low level switching element, SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 40, Mounting dimensions from page 41, Technical drawing from page 42, Circuit drawing from page 47

14 01.2010

51

Devices flush mounting Keylock switch actuator 2 positions, flush mounting

Essential Accessories: d Front bezel set for Keylock switch, flush mounting page 26

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 3 4 3 3 3 3 3 3

Continuation see next page 15 01.2010

Circuit drawing

4 4 4 4 4 4

Technical drawing

IP 65 LL 1 NC + 1 NO MA UT A Keylock switch actuator 2 positions, flush mounting C Position A : Basic position C+A Position C : Maintained action 2 NO MA UT A Standard lock 311 C Front : Plastic black C+A SA 1 NC + 1 NO MA S A C C+A S1 A C C+A 2 NC + 2 NO MA S A C C+A 3 NC + 3 NO MA S A C C+A 4 NC + 4 NO MA S A C C+A IP 65 LL 1 NC + 1 NO M UT A Position A : Basic position Position C : Momentary action 2 NO M UT A Standard lock 311 SA 1 NC + 1 NO M S A Front : Plastic black S1 A 2 NC + 2 NO M S A 3 NC + 3 NO M S A 4 NC + 4 NO M S A

b 24 x 24 mm a 24 x 30 mm Ă˜ 25 mm Typ-Nr. Typ-Nr. Typ-Nr. 51-445.036DF 51-448.036DF 51-442.036DF 51-444.036DF 51-447.036DF 51-441.036DF 51-255.025D2F 51-355.025D2F 51-155.025D2F 51-255.022DF 51-355.022DF 51-155.022DF 51-256.025D2F 51-356.025D2F 51-156.025D2F 51-257.025D2F 51-357.025D2F 51-157.025D2F 51-258.025D2F 51-358.025D2F 51-158.025D2F 51-458.036DF 51-457.036DF 51-145.025D2F 51-145.022DF 51-146.025D2F 51-147.025D2F 51-148.025D2F

Component layout Mounting dimensions

Key remove

Terminals

Switching action

Contacts

Switching system

0

Front protection

Continuation see next page

e

17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17

76 76 76 77 77 77 72 72 72 72 72 72 73 73 73 74 74 74 75 75 75 70 71 66 66 67 68 69

0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027 0.027

51

S1

2 NC + 2 NO MA S

3 NC + 3 NO MA S

4 NC + 4 NO MA S

IP 65 LL 1 NC + 1 NO M Position A : Basic position Position C : Momentary action 2 NO M Standard lock 311 SA 1 NC + 1 NO M Front : Plastic black

Position A : Basic position Position C : Maintained action Standard lock 311 Front : Plastic black

2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO IP 65 LL 1 NC + 1 NO

2 NO

UT UT S S1 M S M S M S MA UT

MA UT

SA 1 NC + 1 NO MA S

S1

2 NC + 2 NO MA S

3 NC + 3 NO MA S

4 NC + 4 NO MA S

Component layout Mounting dimensions

a 24 x 30 mm Ă˜ 25 mm Typ-Nr. Typ-Nr. 51-405.036DF 51-408.036DF 51-402.036DF 51-404.036DF 51-407.036DF 51-401.036DF 51-295.025D2F 51-395.025D2F 51-195.025D2F 51-295.022DF 51-395.022DF 51-195.022DF 51-296.025D2F 51-396.025D2F 51-196.025D2F 51-297.025D2F 51-397.025D2F 51-197.025D2F 51-298.025D2F 51-398.025D2F 51-198.025D2F 51-428.036DF 51-427.036DF 51-495.025D2F 51-495.022DF 51-496.025D2F 51-497.025D2F 51-498.025D2F 51-415.036DF 51-418.036DF 51-412.036DF 51-414.036DF 51-417.036DF 51-411.036DF 51-235.025D2F 51-335.025D2F 51-135.025D2F 51-235.022DF 51-335.022DF 51-135.022DF 51-236.025D2F 51-336.025D2F 51-136.025D2F 51-237.025D2F 51-337.025D2F 51-137.025D2F 51-238.025D2F 51-338.025D2F 51-138.025D2F

4 4 4 4 4 4

4 4

4 4 4 4 4 4

Continuation see next page 16 01.2010

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

Circuit drawing

SA 1 NC + 1 NO MA S

A C C+A A C C+A A C C+A A C C+A A C C+A A C C+A A C C+A A A A A A A A A C C+A A C C+A A C C+A A C C+A A C C+A A C C+A A C C+A

b 24 x 24 mm Typ-Nr.

Technical drawing

IP 65 LL 1 NC + 1 NO MA UT Position A : Basic position Position C : Maintained action Standard lock 311 Front : Plastic black 2 NO MA UT

Key remove

Terminals

Switching action

Contacts

0

Switching system

Front protection

Devices flush mounting

e

17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17

76 76 76 77 77 77 72 72 72 72 72 72 73 73 73 74 74 74 75 75 75 70 71 66 66 67 68 69 76 76 76 77 77 77 72 72 72 72 72 72 73 73 73 74 74 74 75 75 75

0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.029 0.026 0.026 0.026 0.026 0.026 0.026 0.026 0.026 0.026 0.026 0.026 0.026 0.026 0.026 0.026 0.026 0.026 0.026 0.026 0.026 0.026

51

Devices flush mounting

IP 65 LL 1 NC + 1 NO M Position A : Basic position Position C : Momentary action 2 NO M Standard lock 311 SA 1 NC + 1 NO M Front : Plastic black 2 NC + 2 NO M 3 NC + 3 NO M 4 NC + 4 NO M

UT UT S S1 S S S

A A A A A A A

Circuit drawing

Technical drawing

b 24 x 24 mm Typ-Nr.

Component layout Mounting dimensions

Key remove

Terminals

Switching action

Contacts

Switching system

0

Front protection

Continued from previous page

a 24 x 30 mm Ă˜ 25 mm e Typ-Nr. Typ-Nr. 51-438.036DF 4 3 17 70 0.026 51-437.036DF 4 3 17 71 0.026 51-141.025D2F 3 17 66 0.026 51-141.022DF 3 17 66 0.026 51-142.025D2F 3 17 67 0.026 51-143.025D2F 3 17 68 0.026 51-144.025D2F 3 17 69 0.026

Other lock numbers on request Switching system: LL = Low level switching element, SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 40, Mounting dimensions from page 41, Technical drawing from page 42, Circuit drawing from page 47

17 01.2010

51

Devices flush mounting Keylock switch actuator 3 positions, flush mounting

Essential Accessories: d Front bezel set for Keylock switch, flush mounting page 26

a 24 x 30 mm Typ-Nr. 51-361.022DF 51-363.022DF 51-362.022DF

01.2010

Ă˜ 25 mm e Typ-Nr. 51-371.022DF 3 4 65 0.027 51-373.022DF 3 4 65 0.027 51-372.022DF 3 4 65 0.027

51-365.022DF 51-375.022DF 3 4 64 0.027 51-366.022DF 51-376.022DF 3 4 64 0.027

51-367.022DF 51-377.022DF 3 4 62 0.027 51-368.022DF 51-378.022DF 3 4 62 0.027

51-364.022DF 51-374.022DF 3 4 63 0.027

Other lock numbers on request Switching system: SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Mounting dimensions from page 41, Technical drawing from page 42, Circuit drawing from page 47

18

Circuit drawing

b 24 x 24 mm Typ-Nr. IP 65 SA 2 NC + 2 NO MA-0-MA S1 A 51-381.022DF Keylock switch actuator 3 positions, flush mounting C + B 51-383.022DF Position C : Maintained action C+A+B 51-382.022DF Position A : Basic position Position B : Maintained action Standard lock 311 51-385.022DF Position C : Maintained action IP 65 SA 2 NC + 2 NO MA-0-M S1 A Position A : Basic position C + A 51-386.022DF Position B : Momentary action Standard lock 311 51-387.022DF Position C : Momentary action IP 65 SA 2 NC + 2 NO M-0-MA S1 A Position A : Basic position A + B 51-388.022DF Position B : Maintained action Standard lock 311 S1 A 51-384.022DF Position C : Momentary action IP 65 SA 2 NC + 2 NO M-0-M Position A : Basic position Position B : Momentary action Standard lock 311 0

Mounting dimensions Technical drawing

Key remove

Terminals

Switching action

Contacts

Switching system

Front protection

Continuation see next page

51

Devices flush mounting Selector switch actuator 2 positions, flush mounting illuminative Actuators usable for front dimensions: b 24 x 24 mm | 25 mm dia.

Essential Accessories: Front bezel set for Selector switch, flush mounting page 26

d d d

Lever, flush mounting page 24 Single-LED page 30

2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 1 NC 1 NC + 1 NO 1 NO 2 NC 2 NO 1 NC + 1 NO

MA MA MA M M M M M M

Position A : Basic position Position C : Momentary action

IP 65

LL

SA

2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO

M M M

Typ-Nr. 52-476.036 52-473.036 52-475.036 52-472.036 52-471.036 52-271.0252 52-271.022 52-272.0252 52-273.0252 52-274.0252 52-436.036 52-433.036 52-435.036 52-432.036 52-431.036 52-131.0252 52-131.022 52-132.0252 52-133.0252 52-134.0252

4 4 4 4 4

4 4 4 4 4

Circuit drawing

SA

UT UT UT UT UT S S1 S S S UT UT UT UT UT S S1 S S S

Technical drawing

Selector switch actuator 2 positions, flush mounting Position A : Basic position Position C : Maintained action

Mounting dimensions

MA MA MA MA MA MA

0

Component layout

1 NC 1 NC + 1 NO 1 NO 2 NC 2 NO 1 NC + 1 NO

Terminals

LL

Switching action

Switching system

IP 65

Contacts

Front protection

Continuation see next page

e

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

43 46 45 44 47 42 39 38 35 34 29 32 31 30 33 28 25 24 21 20

0.007 0.007 0.007 0.007 0.007 0.006 0.006 0.006 0.006 0.006 0.007 0.007 0.007 0.007 0.007 0.006 0.006 0.006 0.006 0.006

Switching system: LL = Low level switching element, SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 40, Mounting dimensions from page 41, Technical drawing from page 42, Circuit drawing from page 47

19 01.2010

51

Devices flush mounting Selector switch actuator 3 positions, flush mounting illuminative Actuators usable for front dimensions: b 24 x 24 mm | 25 mm dia.

Essential Accessories: Front bezel set for Selector switch, flush mounting page 26

d d d

Lever, raised mounting page 24 Single-LED page 30

Switching action

Terminals

SA

2 NC + 2 NO

MA-0-MA M-0-MA

S1 S1

Typ-Nr. 52-571.022A 52-574.022A

IP 40

SA

2 NC + 2 NO

MA-0-M M-0-M

S1 S1

52-573.022A 52-572.022A

Switching system: SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Mounting dimensions from page 41, Technical drawing from page 42, Circuit drawing from page 47

20 01.2010

Circuit drawing

Contacts

Selector switch actuator 3 positions, flush mounting Position C : Maintained action Position A : Basic position Position B : Maintained action Position C : Momentary action Position A : Basic position Position B : Momentary action

Technical drawing

Switching system

IP 40

0

Mounting dimensions

Front protection

Continuation see next page

e

3 3

5 5

19 17

0.015 0.015

3 3

5 5

18 16

0.015 0.015

51

Accessories Front Lens plastic, raised mounting Continuation see next page

Lens blue transparent colourless transparent green transparent orange transparent red transparent yellow transparent blue transparent colourless transparent green transparent orange transparent red transparent smoked transparent yellow transparent blue translucent colourless transparent green translucent green transparent orange translucent red translucent red transparent white translucent yellow translucent yellow transparent black opaque grey opaque colourless transparent green transparent red transparent yellow transparent

Lens plastic, raised mounting concave, illuminative

flush, illuminative

flush, illuminative (not recommended for film insert)

flush, non-illuminative concave, illuminative (not recommended for film insert)

b 18 x 18 mm Typ-Nr. 51-954.6 51-954.7 51-954.5 51-954.3 51-954.2 51-954.4 51-953.6 51-953.7 51-953.5 51-953.3 51-953.2 51-953.1 51-953.4 51-951.6 51-955.7 51-951.5 51-955.5 51-951.3 51-951.2 51-955.2 51-951.9 51-951.4 51-955.4 51-951.0 51-951.8

a 18 x 24 mm Typ-Nr. 51-904.6 51-904.7 51-904.5 51-904.3 51-904.2 51-904.4 51-903.6 51-903.7 51-903.5 51-903.3 51-903.2 51-903.1 51-903.4 51-901.6 51-905.7 51-901.5 51-905.5 51-901.3 51-901.2 51-905.2 51-901.9 51-901.4 51-905.4 51-901.0 51-901.8 51-906.7 51-906.5 51-906.2 51-906.4

Ă˜ 18 mm Typ-Nr.

51-933.6 51-933.7 51-933.5 51-933.3 51-933.2 51-933.1 51-933.4 51-931.6 51-935.7 51-931.5 51-935.5 51-931.3 51-931.2 51-935.2 51-931.9 51-931.4 51-935.4 51-931.0 51-931.8

e 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001

Lens plastic, flush mounting mat Continuation see next page

Lens plastic, flush mounting illuminative

non-illuminative

Lens blue transparent flush colourless transparent flush green transparent flush orange transparent flush red transparent flush smoked transparent flush yellow transparent flush black opaque flush grey opaque flush white translucent flush

b 24 x 24 mm Typ-Nr. 61-9671.6 61-9671.7 61-9671.5 61-9671.3 61-9671.2 61-9671.1 61-9671.4 61-9771.0 61-9771.8 61-9771.9

a 24 x 30 mm Typ-Nr. 61-9681.6 61-9681.7 61-9681.5 61-9681.3 61-9681.2 61-9681.1 61-9681.4 61-9781.0 61-9781.8 61-9781.9

Ă˜ 25 mm Typ-Nr. 61-9642.6 61-9642.7 61-9642.5 61-9642.3 61-9642.2 61-9642.1 61-9642.4

e 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002

21 01.2010

51

Accessories Lens plastic with symbol, flush mounting Continuation see next page

Lens plastic with symbol, flush mounting flush - level, illuminative

Symbol ON/OFF

Ring

Stand by

Lens blue transparent colourless transparent green transparent red transparent blue transparent colourless transparent green transparent orange transparent red transparent yellow transparent blue transparent colourless transparent green transparent red transparent

Ă˜ 25 mm Typ-Nr. 61-9643.602 61-9643.702 61-9643.502 61-9643.202 61-9643.601 61-9643.701 61-9643.501 61-9643.301 61-9643.201 61-9643.401 61-9643.603 61-9643.703 61-9643.503 61-9643.203

0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002

Typ-Nr. 61-9707.7

0.001

Ă˜ 25 mm Typ-Nr. 61-9841.0A 61-9841.6A 61-9841.4A 61-9841.8A 61-9841.5A 61-9841.2A

0.002 0.002 0.002 0.002 0.002 0.002

e

The silvery coat is being applied on the lens (screen print) with an additional protective lacquer.

Marking plate for lens round plastic, flush mounting can be hot stamped Continuation see next page

Marking plate for lens round plastic, flush mounting only applicable with Lens round Typ-Nr. 61-9642.X

Marking plate Plastic colourless transparent

e

Lens metal with spot, flush mounting mat Continuation see next page

Lens metal with spot, flush mounting

22 01.2010

Lens Aluminium black flush Aluminium blue flush Aluminium gold flush Aluminium natural flush Aluminium olive-green flush Aluminium red flush

e

51

Accessories Lens metal, flush mounting mat Continuation see next page

Lens metal, flush mounting convex

flush

Ă˜ 25 mm Typ-Nr. 61-9842.0 61-9842.6 61-9842.4 61-9842.8 61-9842.5 61-9842.2 61-9841.0 61-9841.6 61-9841.4 61-9841.8 61-9841.5 61-9841.2

0.003 0.003 0.003 0.003 0.003 0.003 0.002 0.002 0.002 0.002 0.002 0.002

Ă˜ 32 mm Typ-Nr. 61-9593.0 61-9593.5 61-9593.2 61-9593.4

0.004 0.004 0.004 0.004

Front bezel Plastic black

Typ-Nr. 52-950.0

0.001

Plastic black

52-952.0

0.001

Lens Aluminium black Aluminium blue Aluminium gold Aluminium natural Aluminium olive-green Aluminium red Aluminium black Aluminium blue Aluminium gold Aluminium natural Aluminium olive-green Aluminium red

e

Mushroom-head cap, flush mounting Continuation see next page

Mushroom-head cap, flush mounting

Mushroom had cap Plastic black opaque Plastic green opaque Plastic red opaque Plastic yellow opaque

e

Front bezel square for selector switch, raised mounting Continuation see next page

Front bezel square for selector switch, raised mounting 24 x 24 mm 26 x 26 mm

e

23 01.2010

51

Accessories Lever, raised mounting with bar and marking dot Continuation see next page

Lever, raised mounting illuminative

Lever Plastic black

Plastic grey

non-illuminative

Plastic black Plastic grey

Bar colour blue green orange red yellow blue green orange red yellow black grey white

e

Typ-Nr. 52-928.60 52-928.50 52-928.30 52-928.20 52-928.40 52-929.60 52-929.50 52-929.30 52-929.20 52-929.40 52-928.0 52-929.8 52-929.9

0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001

Typ-Nr. 61-9028.60 61-9028.50 61-9028.30 61-9028.20 61-9028.40 61-9029.60 61-9029.50 61-9029.30 61-9029.20 61-9029.40 61-9028.0 61-9028.9 61-9029.8 61-9029.9

0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001

Lever, flush mounting with bar and marking dot Continuation see next page

Lever, flush mounting illuminative

Lever Plastic black

Plastic grey

non-illuminative

Plastic black Plastic grey

Bar colour blue green orange red yellow blue green orange red yellow black white grey white

e

Legend frame for devices 25 mm dia., flush mounting

Legend frame 30 x 50 mm, adhesive, Aluminium black Technical drawing from page 42

24 01.2010

Typ-Nr. 61-9980.0

Technical drawing

Continuation see next page

e

10

0.001

51

Accessories Legend plate insert for Legend frame 61-9980.0 Continuation see next page

Legend plate insert 14.5 x 23.5 mm, adhesive, Aluminium black 14.5 x 23.5 mm, adhesive, Aluminium natural

e

Typ-Nr. 704.968.1

0.001

704.968.0

0.001

Front bezel set for Indicators and Illuminated pushbutton, flush mounting

b 24 x 24 mm Typ-Nr. 61-9930.0 61-9930.4

a 24 x 30 mm Typ-Nr. 61-9931.0 61-9931.4

Mounting dimensions

Front bezel set for Indicators and Illuminated pushbutton, flush mounting

Front bezel Plastic black Plastic silver Aluminium black Aluminium blue Aluminium gold Aluminium natural Aluminium olive-green Aluminium red

e

61-9933.1 61-9933.6 61-9933.4 61-9933.0 61-9933.5 61-9933.2

3 3 3 3 3 3 3 3

0.008 0.008 0.006 0.006 0.006 0.006 0.006 0.006

Ø 25 mm Typ-Nr.

Mounting dimensions

Continuation see next page

e

61-9933.1 61-9933.6 61-9933.4 61-9933.0 61-9933.5 61-9933.2 61-9933.10

4 4 4 4 4 4 4 4

0.013 0.006 0.006 0.006 0.006 0.006 0.006 0.008

Ø 25 mm Typ-Nr. 61-9933.10

Mounting dimensions from page 41

Front bezel set for Mushroom-head pushbutton, flush mounting Continuation see next page

Front bezel set for Mushroom-head pushbutton, flush mounting

Front bezel Aluminium natural Aluminium black Aluminium blue Aluminium gold Aluminium natural Aluminium olive-green Aluminium red Plastic black

Ø 40 mm Typ-Nr. 61-9934.8

Mounting dimensions from page 41

25 01.2010

51

Accessories Front bezel set for Keylock switch, flush mounting

Mounting dimensions

Front bezel set for Keylock switch, flush mounting

Front bezel Plastic black Plastic silver Aluminium black Aluminium blue Aluminium gold Aluminium natural Aluminium olive-green Aluminium red

e

61-9932.1 61-9932.6 61-9932.4 61-9932.0 61-9932.5 61-9932.2

3 3 3 3 3 3 3 3

0.008 0.008 0.006 0.006 0.006 0.006 0.006 0.006

Ø 25 mm Typ-Nr.

Mounting dimensions

Continuation see next page

e

61-9932.1 61-9932.6 61-9932.4 61-9932.0 61-9932.5 61-9932.2 61-9932.10

3 3 3 3 3 3 3 3

0.007 0.006 0.006 0.006 0.006 0.006 0.006 0.008

Front protective cap Silicone natural transparent

Typ-Nr. 61-9927.2

0.001

Silicone natural transparent

84-9103.7

0.001

b 24 x 24 mm Typ-Nr. 61-9930.0 61-9930.4

a 24 x 30 mm Typ-Nr. 61-9931.0 61-9931.4

Ø 25 mm Typ-Nr. 61-9932.10

With the round front bezel sets Ø25 mm the anti-twist ring is part of the sales-package.

Mounting dimensions from page 41

Front bezel set for Selector switch, flush mounting Continuation see next page

Front bezel set for Selector switch, flush mounting

Front bezel Plastic black Aluminium black Aluminium blue Aluminium gold Aluminium natural Aluminium olive-green Aluminium red Plastic black

b 24 x 24 mm Typ-Nr. 61-9936.0

With the round front bezel sets Ø25 mm the anti-twist ring is part of the sales-package.

Mounting dimensions from page 41

Front protective cap for flush - level lenses only for protection IP 68 Continuation see next page

Front protective cap for front bezel set 24 x 30 mm, flush mounting for front bezel set 25 mm dia., flush mounting

e

ATTENTION when using the front protection cover for push buttons the external sealing in the front bezel set and the silicone bellows in the actuator are to be removed !

26 01.2010

51

Accessories Protective cover, raised mounting

b 18 x 18 mm Typ-Nr. 51-920

Protective cover, raised mounting hinged, transparent, with means for sealing

a 18 x 24 mm Typ-Nr.

Technical drawing

Continuation see next page

e

51-925

2 3

0.002 0.002

Technical drawing from page 42

Protective cover, flush mounting

a 24 x 30 mm Typ-Nr.

Ø 25 mm Typ-Nr.

Technical drawing

Protective cover, flush mounting hinged, transparent, with means for sealing

b 24 x 24 mm Typ-Nr. 61-9921.0

Mounting dimensions

Continuation see next page

e

61-9924.0

3 3 3

7 8 9

0.006 0.006 0.006

61-9922.0

slide by side, with means not for sealing Mounting dimensions from page 41, Technical drawing from page 42

Blind plug, raised mounting

Blind plug, raised mounting

Blind plug Plastic black

b 18 x 18 mm Typ-Nr. 51-948.0

a 18 x 24 mm Typ-Nr. 51-947.0

Ø 18 mm Typ-Nr. 51-949.0

Mounting dimensions

Continuation see next page

e

1

0.003

Blind plugs fit also in mounting holes no. 2 Mounting dimensions from page 41

Blind plug, flush mounting

b 24 x 24 mm Typ-Nr. 61-9451.0

a 24 x 30 mm Typ-Nr. 61-9452.0

Ø 25 mm Typ-Nr. 61-9453.0

3 3

Technical drawing

Blind plug, flush mounting

Blind plug Plastic black

Mounting dimensions

Continuation see next page

e

11

0.006 0.006

Mounting dimensions from page 41, Technical drawing from page 42

27 01.2010

51

Accessories Master key Continuation see next page

Master key Lock numbers 311 ... 445 (DOM)

e

Typ-Nr. 31-989.300

0.006

Typ-Nr. 31-989.311

0.006

Typ-Nr. 31-985.0

0.005

Spare key Continuation see next page

Spare key Key lock switch, standard lock 311 (DOM)

e

Other lock numbers on request

EMC Key protection cap Continuation see next page

EMC Key protection cap Plastic black, for lock type DOM

e

>

Backside PCB plug-in base

PCB plug-in base 16.4 mm dia. x 9.8 mm for Low level switching element, Pins axial 17.8 x 12.9 mm x 9.8 mm for Snap-action switching element 2.8 mm, Pins axial 17.9 x 17.9 x 8.4 mm for Low level switching element, Pins bent at right-angle

P

Typ-Nr. 31-940

P P

31-942 31-941

Component layout

Terminals

Continuation see next page

e

2

0.002

3 1

0.002 0.004

PCB plug-in base Pins right-angle : With the extendable mounting the distance between plug-in base and PCB can be varied up to 3 mm.

Terminals: P = PCB terminal Component layout from page 40

Multi-plug housing Continuation see next page

Multi-plug housing for Switching block

28 01.2010

Typ-Nr. 51-943.0

e 0.005

51

Accessories Flat receptacle Continuation see next page

Flat receptacle 2.0 x 0.5 mm for Universal terminal 2.8 x 0.5 mm for Multi-plug housing 2.8 x 0.5 mm for Plug-in terminal

e

Typ-Nr. 31-945

0.001

51-943.1 31-946

0.001 0.001

Typ-Nr. 01-928

0.001

31-928 31-929

0.001 0.001

Typ-Nr. 01-929

0.010

Typ-Nr. 10-1309.1309 10-1310.1319 10-1311.1249 10-1312.1229 10-1313.1209 10-1313.1249 10-1316.1179 10-1316.1209 10-1319.1179 10-1319.1199 10-1306.1349 10-1307.1369

0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001

Insulation sleeve Continuation see next page

Insulation sleeve Cover Plug-in terminals for snap-action switching element 2.8 mm for Flat receptacle 31-945 for Flat receptacle 31-946

e

Terminal cover Continuation see next page

Terminal cover

e

>

Illumination Filament lamp Continuation see next page

Socket Filament lamp

3

T1 /4 MG

Operating voltage/-current 12 VAC/DC, 75 mA 14 VAC/DC, 80 mA 18 VAC/DC, 40 mA 24 VAC/DC, 35 mA 28 VAC/DC, 30 mA 28 VAC/DC, 40 mA 36 VAC/DC, 20 mA 36 VAC/DC, 30 mA 48 VAC/DC, 20 mA 48 VAC/DC, 25 mA 6 VAC/DC, 120 mA 6.3 VAC/DC, 200 mA

e

29 01.2010

51

Accessories Single-LED Continuation see next page

Socket Single-LED

T1 3/4 MG

Light colour blue

green

red

white diffuse

yellow

Operating voltage/-current 12 VAC/DC, 7/14 mA 24 VAC/DC, 7/14 mA 28 VAC/DC, 7/14 mA 48 VAC/DC, 4/8 mA 6 VDC, 15 mA 12 VAC/DC, 4/7 mA 24 VAC/DC, 4/7 mA 28 VAC/DC, 4/7 mA 48 VAC/DC, 2/4 mA 6 VDC, 7 mA 12 VAC/DC, 7/14 mA 24 VAC/DC, 7/14 mA 28 VAC/DC, 7/14 mA 48 VAC/DC, 4/8 mA 6 VDC, 15 mA 12 VAC/DC, 7/14 mA 24 VAC/DC, 7/14 mA 28 VAC/DC, 7/14 mA 48 VAC/DC, 4/8 mA 6 VDC, 15 mA 12 VAC/DC, 7/14 mA 24 VAC/DC, 7/14 mA 28 VAC/DC, 7/14 mA 48 VAC/DC, 4/8 mA 6 VDC, 15 mA

e

Typ-Nr. 10-2J09.1066 10-2J12.1066 10-2J13.1066 10-2J19.1046 10-2J06.3146 10-2J09.1065 10-2J12.1065 10-2J13.1065 10-2J19.1045 10-2J06.3145 10-2J09.1062 10-2J12.1062 10-2J13.1062 10-2J19.1042 10-2J06.3142 10-2J09.1069 10-2J12.1069 10-2J13.1069 10-2J19.1049 10-2J06.3149 10-2J09.1064 10-2J12.1064 10-2J13.1064 10-2J19.1044 10-2J06.3144

0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002

Operating voltage 230/240 V

Typ-Nr. 02-904.7

0.003

110 V 125 V 145 V

02-904.0 02-904.1 02-904.3

0.003 0.003 0.003

Typ-Nr. 02-912.2

e 0.045

02-912.3 02-912.4 02-912.1

0.090 0.095 0.025

Note: AC operation through halve-wave rectifier possible, slight flickering can occure.

Series resistor for lamp voltage reduction Continuation see next page

Series resistor 10 k立, for filament lamp 48 VAC, 25 mA 2.7 k立, for filament lamp 48 VAC, 25 mA 3.3 k立, for filament lamp 48 VAC, 25 mA 4.7 k立, for filament lamp 48 VAC, 25 mA

e

Please keep to the country specific security rules.

Terminal plate empty for fitting with series resistors Continuation see next page

Terminal plate empty 10 spaces 125 x 60 x 15 mm 15 spaces 187.5 x 60 x 15 mm 20 spaces 250 x 60 x 15 mm 5 spaces 62.5 x 60 x 15 mm

30 01.2010

51

Accessories >

Assembling Fixing nut Continuation see next page

Fixing nut Metal, specifically for keylock switches

e

Typ-Nr. 31-991

0.005

Typ-Nr. 51-910

0.001

Typ-Nr. 61-9730.0

0.011

02-905

0.011

Typ-Nr. 61-9740.0

0.003

Typ-Nr. 01-907

0.020

Typ-Nr. 51-938

0.027

Anti-twist ring for Key lock- and Selector switch Continuation see next page

Anti-twist ring

e

Lens remover Continuation see next page

Lens remover for flush mounting for raised mounting

e

Lamp remover Continuation see next page

Lamp remover

e

CAUTION A switching process might be released when replacing the lamp/LED !

Mounting tool Continuation see next page

Mounting tool

e

Dismantling tool Continuation see next page

Dismantling tool for dismantling of Lens, Lens holder and Switching element block

e

31 01.2010

51

Accessories Flat receptacle remover Continuation see next page

Flat receptacle remover for removing the Flat receptacle of the Multi-plug in housing

32 01.2010

Typ-Nr. 51-943.9

e 0.001

51

Technical Data Rated voltage 250 VAC/VDC

Actuator with snap-action switching element

Rated current 5A

Switching system Self-cleaning, double-break, snap action switching system (with contact gap 2 x 0.5 mm).

1 normally closed or 1 normally open contact per element.

Snap-action switching elements with soldering terminals at the sides: up to 4 switching element can be on a pushbutton (max. 4 normally closed and 4 normally open contacts).

Snap-action switching element with axial plug-in terminals 2.8 mm stachable, only 1 switching element can be on a pushbutton.

Contact resistance Starting value (initial) ≤50 mΩ Electrostatic discharge (ESD) ≤15 KV (Keylock switch) Conventional free air thermal current 5A The maximum current in continuous operation and at ambient temperature not exceeding the quoted maximum values.

Material Material of contact Gold plated silver Switch housing Axial soldering-/plug-in terminal 2.8 mm: Diallylphthalate DAP, Polyamide 66, Polysulfone, heat-resistant and self-extinguishing.

Soldering terminal: PA 6.6 Ultramid Actuator housing Polyetherimide, self-extinguishing

Mechanical characteristics Terminals Snap-action switching element with tinned soldering terminals at the sides: Max. wire diameter 2 wires à 1.2 mm Max. wire cross-section of stranded cable 1 x 1 mm² Snap-action switching element with axial soldering terminals, which can also be used as plug-in terminals 2.8 x 0.5 mm: Max. wire diameter 2 wires of 1 mm Max. wire cross-section of stranded cable 2 of 0.75 mm² or 1 x 1.0 mm² Actuating torque 2.5 Ncm ... 5.5 Ncm, depending on the number of switching elements. Measured at the key or lever of the keylock- or selector switch.

Actuating force 4 N ... 6 N, depending on the number of switching elements Actuating travel Illuminated pushbutton 3 mm Keylock-/selector switch actuator 2 positions: 1x ca. 42° deflection momentary action 1x ca. 90° deflection maintained action Rebound time ≤5ms

Switch rating AC (cosφ 0,7) 0

Voltage Current

125 VAC 3A

250 VAC 2A

Switch rating DC (inductive) L:R = 30 ms 0

Voltage Current

24 VDC 2A

60 VDC 0.7 A

110 VDC 0.2 A

220 VDC 0.1 A

Electric strength 2500 VAC, 50 Hz, 1 min. between all terminals and earth, as per IEC 60512-2-11 Protection class II

Environmental conditions Storage temperature -40 °C ... +85 °C Service temperature -25 °C ... +55 °C For indicators and illuminated pushbuttons mounted as a block, make sure the heat can escape freely.

Protection degree IP 65 front side, as per IEC 60529 Shock resistance (Single impacts, semi-sinusoidal) 15 g for 11 ms, as per IEC 60512-4-3, IEC 60068-2-27 Vibration resistance (Sinusoidal) 10 g at 10 Hz ... 1500 Hz, amplitude 1.5 mm, as per IEC 60512-44, IEC 60068-2-6 Climate resistance Standard condition, as per IEC 60068-2-3 and 2-30 Changing condition, as per IEC 60068-2-14 and 2-33

Mechanical lifetime 0

Momentary action Maintained action Keylock switch

Switch rating 250 VAC, 5 A (cosφ 1) 250 VAC, 3 A (cosφ 0,3)

2 million cycles of operation 1 million cycles of operation 50 000 cycles of operation

Electrical characteristics Standards IEC 61058, EN 61058

Approvals Approbations CB (IEC 61058) CSA ENEC (EN 61058) Germanischer Lloyd UL 33 01.2010

51

Technical Data Declaration of conformity CE

Environmental conditions

>

Storage temperature -40 °C ... +85 °C

Actuator with snap-action switching element block (Keylock- and Selector switch 3 positions)

Service temperature -25 °C ... +55 °C for selector switches mounted as a block, make sure the heat can escape freely

Switching system Self-cleaning, double-break, snap action switching system 1 normally closed or 1 normally open contact per element.

Protection degree Front side, as per IEC 60529 IP 65 keylock switch IP 40 selector switch

Material Material of contact Gold plated hardsilver Switch housing Diallylphthalate (DAP), heat-resistant and self-extinguishing

Approvals Approbations CB (IEC 61058) CSA ENEC (EN 61058) Germanischer Lloyd UL

Actuator housing Polyetherimide, self-extinguishing

Mechanical characteristics Terminals Soldering terminal which can also be used as plug-in terminal 2.8 x 0.5 mm: Max. wire diameter 2 wires of 1 mm Max. wire cross-section of stranded cable 2 x 0.75 mm² Actuating torque 2.5 Ncm ... 5.5 Ncm, depending on the number of switching elements. Measured at the key or lever of the keylock- or selector switch.

Actuating travel Keylock-/selector switch actuator with 3 positions 2x ca. 42° deflection momentary action 2x ca. 90° deflection maintained action Rebound time ≤5ms Mechanical lifetime

Declaration of conformity CE >

Actuator with low level switching element Switching system This low level switching element was designed for switching low powers in electronic circuits. The mechanism assures reliable switching of loads ranging from a few μA / μV up to 100 mA / 42 VAC/ DC. Single-break momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contacts per switching element; combination of normally open and normally closed is possible.

Special features are the long life, extremely short rebound time and stable contact resistance.

Material

0

Keylock switch Selector switch

50 000 cycles of operation 100 000 cycles of operation

Electrical characteristics Electrostatic discharge (ESD) ≤15 KV (Keylock switch) Conventional free air thermal current 5A The maximum current in continuous operation and at ambient temperature not exceeding the quoted maximum values.

Switch rating 250 VAC, 5 A (cosφ 0,75) Electric strength 2500 VAC, 50 Hz, 1 min. between all terminals and earth, as per IEC 60512-2-11 Protection class II

Material of contact Gold plated Switch housing Polysulfone, heat-resistant and self-extinguishing Actuator housing Polyetherimide, self-extinguishing

Mechanical characteristics Terminals The universal terminals permit these units to be mounted on printed circuit boards (PCB). These terminals can also be used as soldering or plug-in terminals.

For these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in.

Soldering terminal: Max. wire diameter 2 wires à 0.8 mm Max. wire cross-section of stranded cable 1x 0.75 mm² Plug-in terminal 2.0 x 0.5 mm Actuating torque 2.5 Ncm ... 5.5 Ncm, measured at the key or lever of the keylock- or selector switch

34 01.2010

51

Technical Data Actuating force 3 N ... 3,5 N Actuating travel Illuminated pushbutton 3 mm Keylock-/selector switch actuator 2 positions: 1x ca. 42° deflection momentary action 1x ca. 90° deflection maintained action Rebound time Typ. <100 μs Mechanical lifetime 0

Momentary action Maintained action Keylock switch

5 million cycles of operation 1 million cycles of operation 50 000 cycles of operation

Electrical characteristics Contact resistance Starting value (initial) ≤50 mΩ Electrostatic breakdown value ≤15 KV (Keylock switch) Switch rating 10 μA, 100 μV to 100 mA at 42 VAC/VDC Electric strength 2500 VAC, 50 Hz, 1 min. between all terminals and earth, as per IEC 60512-2-11

Environmental conditions Storage temperature -40 °C ... +85 °C Service temperature -25 °C ... +55 °C For indicators and illuminated pushbuttons mounted as a block, make sure the heat can escape freely.

Protection degree IP 65 front side, as per IEC 60529 Shock resistance (Single impacts, semi-sinusoidal) 15 g for 11 ms, as per IEC 60512-4-3, IEC 60068-2-27

35 01.2010

Typical Applications Diode element When indicators and illuminated pushbuttons equipped with diodes, the user is able to perform a lamp check or wire an alarm circuit simply with a considerable saving of space.

0

36 01.2010

51

51

Application guidelines Suppressor circuits When switching inductive loads such as relays, DC motors, and DC solenoids, it is always important to absorb surges (e.g. with a diode) to protect the contacts. When these inductive loads are switched off, a counter emf can severely damage switch contacts and greatly shorten lifetime.

Fig. 1 shows an inductive load with a free-wheeling diode connected in parallel. This free-wheeling diode provides a path for the inductor current to flow when the current is interrupted by the switch.

Without this free-wheeling diode, the voltage across the coil will be limited only by dielectric breakdown voltages of the circuit or parasitic elements of the coil. This voltage can be kilovolts in amplitude even when nominal circuit voltages are low (e.g. 12 VDC) see Fig. 2.

The free-wheeling diode should be chosen so that the reverse breakdown voltage is greater than the voltage driving the inductive load. The DC blocking voltage (VR) of the free-wheeling diode can be found in the datasheet of a diode. The forward current should be equal or greater than the maximum current flowing through the load.

To get an efficient protection, the free-wheeling diode must be connected as close as possible to the inductive load!

0

Counter emf over load without free-wheeling diode Fig. 2

Switching with inductive load Fig. 1

Switch

ON

OFF

0 VDC

+ _

Free-wheeling diode

Inductive load

Sveral hundred to several thousend volts

e=L

di __ dt

37 01.2010

51

Marking General notes 0

2. Hot stamping For larger series it is worth considering markings by means of hot stamping We will pleased to advise you.

For letters and figures, typefaces with 2.5 mm, 3 mm and 4 mm are available.

1. Engraving In addition to the most commonly used world languages, in DIN 1451-3 close spacing, other typefaces are available as Scandinavian, Slavic, Greek, Russian and Polish.

Red, blue and black lenses are filled with white colour. Other colour lenses are filled in black.

Standard height of letters is 2 mm. If the height is not specified, we will supply 2 mm engraved letters.

3. Film inserts Instead of using engraving the lenses can be fitted with transparent film inserts, as an alternative. For this purpose, though, it is advisible to use transparent lenses.

In the case of use of a smoke-black lens the fitted film becomes readable only if the lamp is on.

The film thickness is 0.2 mm.

Important : Consider pushbutton mounting orientation befor specifying engraving characters !

>

Lenses for indicators and illuminated pushbuttons, raised mounting All dimensions in mm 0

Front size (Lens) 18 dia.

(15.8 dia.)

Film insert max. size 12.8 dia.

18 x 18 (15.3 x 15.3)

12.7 x 12.7

18 x 24 (15.3 x 21.5)

12.7 x 18.7

Height of letters h 2 3 4 5 6 8 2 3 4 5 6 8 2 3 4 5 6

Number of lines 3 2 2 1 1 1 4 3 2 2 1 1 4 5 3 4 2 3 2 1 2 1

8

Number of (target value) capital letters per line 6 5 3 2 2 2 7-8 6-7 4-5 3-4 3 2-3 11 7-8 9 -10 6-7 7 4-5 5-6 3-4 4-5 3 3-4 2-3

Number of (target value) small letters per line 6 6 4 3 3 2 8 7 5 4 3-4 2-3 12 8 10 - 11 7 7-8 5 6 4 5 3-4 3-4 2-3

Image B4 B4 B4 B4 B4 B4 B3 B3 B3 B3 B3 B3 B1 B2 B1 B2 B1 B2 B1 B2 B1 B2 B1 B2

0

Engraving

B1

B2

B3

B4

AB abc

AB abc

AB

AB abc

>

38 01.2010

h

Film

abc

51

Marking Lenses for indicators and illuminated pushbuttons, flush mounting All dimensions in mm 0

Front size (Lens) 24 x 24 (18 x 18)

Film insert max. size 15.1 x 15.1

24 x 30 (18 x 24)

15.1 x 21

Height of letters h 2 3 4 5 6 8 2 3 4 5 6

25 dia.

(19.7 dia.)

Marking plate

Number of lines 4 3 2 2 1 1 4 5 3 4 2 3 2

8

1 2 1

2 3 4 5 6 8

3 2 2 1 1 1

Number of (target value) capital letters per line 8-9 7-8 4-5 4 4 2-3 12 8-9 10 - 11 7-8 7 4-5 5-6 4 4-5 3 3-4 2-3 6 5 3 2 2 2

Number of (target value) small letters per line 9 8 5 4-5 4 2-3 13 9 11 - 12 8 8 5 6 4-5 5 3-4 3-4 2-3 6 6 4 3 3 2

Image B3 B3 B3 B3 B3 B3 B1 B2 B1 B2 B1 B2 B1 B2 B1 B2 B1 B2 B4 B4 B4 B4 B4 B4

0

Engraving

B1

B2

B3

B4

AB abc

AB abc

AB

AB abc

h

Film

abc

39 01.2010

51

Drawings Component layout 1 PCB plug-in base page 28 Extendable mounting pins

3

1

4 2

a

9

4

3

b

b

17.9

31 Switch

a 42

9.6

17.9

1.27

Ø1.0 all holes

7.62

15.24

5 x 2.54

1.27

1.27

1.27

0.85

Drilling plan (conductor side)

2 PCB plug-in base page 28 3.81

3.81

Ø1.0 5.08

10.16

all holes

Ø2.1 hole for central mounting with M2 screw, if desired

12.7

3 PCB plug-in base page 28

7.62

Ø2.1 hole for central mounting with M2 screw, if desired

10.16

3.81

7.62

3.81

+ 0.1

Ø1.0 0 all holes

4 Indicator actuator page 7 | Illuminated pushbutton actuator page 8 | Keylock switch 2 positions page 9 | Selector switch 2 positions page 11 | Indicator actuator, flush mounting page 13 | Illuminated pushbutton actuator, flush mounting page 14 | Keylock switch actuator 2 positions, flush mounting page 15 | Selector switch actuator 2 positions, flush mounting page 19 Terminal (rearside)

PCB layout (conductor side)

7.62 Round

Square

Rectangular

Anti twist device

40 01.2010

Ø1.0 all holes

10.16

5.08

2 4

1 3 a b

2 4

1 3 a b

2 4

1 3 a b

2.54

3.81

51

Drawings Mounting dimensions 1 Indicator actuator page 7 | Illuminated pushbutton actuator page 8 | Blind plug, raised mounting page 27 18 x 24 mm

16

18 min.

Ø18 mm

18 min.

18 min.

18 x 18 mm

+0.2 0

18 min.

24 min.

18 min.

2 Keylock switch 2 positions page 9 | Keylock switch 3 positions page 10 | Selector switch 2 positions page 11 | Selector switch 3 positions page 12 18 x 24 mm

16

+0.2 0

15

+0.05 0

18 min.

Ø18 mm

18 min.

0 1.7 -0.1

18 min.

18 x 18 mm

18 min.

24 min.

18 min.

3 Indicator actuator, flush mounting page 13 | Illuminated pushbutton actuator, flush mounting page 14 | Keylock switch actuator 2 positions, flush mounting page 15 | Keylock switch actuator 3 positions, flush mounting page 18 | Selector switch actuator 2 positions, flush mounting page 19 | Selector switch actuator 3 positions, flush mounting page 20 | Front bezel set for Indicators and Illuminated pushbutton, flush mounting page 25 | Front bezel set for Keylock switch, flush mounting page 26 | Front bezel set for Selector switch, flush mounting page 26 | Protective cover, flush mounting page 27 | Blind plug, flush mounting page 27

24 min.

21

21 25 min.

24 x 24 mm

+0.25 -0.15

24 min.

24 x 30 mm

+0.25 -0.15

+0.4 22.3 0

25 min.

Ø25 mm

+0.25

27 -0.15

30 min.

+0.25

21 -0.15

24 min.

- Hole spacing min. 26 mm / min. 26 mm by using of the round front protective cap 84-9103.7 - Hole spacing min. 31 mm / min. 25 mm by using of the rectangular front protectice cap 61-9927.2

41 01.2010

51

Drawings 4 Front bezel set for Mushroom-head pushbutton, flush mounting page 25

Ø32 = 32 min.

+0.4 0

Ø 32 mm

22.3

Ø40 = 40 min.

Ø 40 mm

Ø40 = 40 min. Ø32 = 35 min.

Technical drawing

2.8 x 0.5

1 Keylock switch 3 positions page 10

18 x 24 mm

1.5 ... 6

11.5

42

35

2 Protective cover, raised mounting page 27

20

25.5

23.5

10.5

32

14.5

3 Protective cover, raised mounting page 27

24

25.5

23.5

10.5

32

14.5

42 01.2010

18 x 18 mm

Ø 18 mm

51

Drawings

2.8 x 0.5

4 Keylock switch actuator 3 positions, flush mounting page 18

24 x 30 mm

1.5 ... 5

3.5

24 x 24 mm

Ø 25 mm

50

27

2.8 x 0.5

5 Selector switch actuator 3 positions, flush mounting page 20

1.5 ... 5

24 x 24 mm

Ø 25 mm

2 9.5

50

2.8 x 0.5

6 Selector switch 3 positions page 12

1.5 ... 6

6

Ø 18 mm

42

14

43 01.2010

51

Drawings 7 Protective cover, flush mounting page 27 24

12

25

5.5 max.

24

4.5

8 Protective cover, flush mounting page 27 24

12

25

5.5 max.

30

4.5

9 Protective cover, flush mounting page 27 10 29.3

1.5 min.

42

5.5 max.

Ă&#x2DC; 25

50

14.5

4

10 Legend frame page 24

Ă&#x2DC;25

23.5

30

11 Blind plug, flush mounting page 27 16.5 min.

20.5 max.

23.5

2

1...5

25

44 01.2010

51

Drawings

2.8 x 0.5

3

L1 10.5

Ø 18 mm

U

U+D

Universal terminal + diodes

18 x 18 mm

Universal terminal

18 x 24 mm

Soldering terminal (also plugable)

1.5 ... 6

Soldering terminal

12 Indicator actuator page 7

L

L1

U

U+D

23

26

35

1D, 2D

35

L

Universal terminal

Combined terminal + diodes

L

L1

U

H+D

1NC+1NO

28

36

-

-

2NC+2NO

35.5

-

-

-

3NC+3NO

43

-

-

-

4NC+4NO

Soldering terminal

Soldering terminal (also pluggable)

13 Illuminated pushbutton actuator page 8

1.5 ... 6

18 x 24 mm

18 x 18 mm

Ø 18 mm

2.8 x 0.5

3

L1 10.5

U

H+D

L

50.5

-

-

-

1NC+1NO+D

-

-

-

43.5

2NO+2NC+D

-

-

-

51

35

-

1NC, 1NO, 1NC+1NO, 2NC, 2NO

L1 11.5

Universal terminal

18 x 18 mm

Soldering terminal (also pluggable)

18 x 24 mm

L

L1

U

1NC+1NO

26.5

36

-

2NC+2NO

34

-

-

3NC+3NO

41.5

-

-

4NC+4NO

49

-

Ø 18 mm 3

2.8 x 0.5

1.5 ... 6

Soldering terminal

14 Keylock switch 2 positions page 9

U

1NC, 1NO, 1NC+1NO, 2NC, 2NO

35.5

L

35

45 01.2010

51

Drawings

Ø 25 mm

3

L1 2

U

Universal terminal

24 x 24 mm

2.8 x 0.5

24 x 30 mm

Soldering terminal

1.5 ... 4

Soldering terminal (also pluggable)

15 Indicator actuator, flush mounting page 13

L

L1

U

31

34

44

L

L

L1

U

1NC+1NO

36.5

44

-

2NC+2NO

44

-

-

3NC+3NO

51.5

-

-

4NC+4NO

59

-

Ø 25 mm

3

L1 2

Universal termnal

24 x 24 mm

2.8 x 0.5

24 x 30 mm

Soldering terminal (also pluggable)

1.5 ... 4

Soldering terminal

16 Illuminated pushbutton actuator, flush mounting page 14

-

1NC, 1NO, 1NC+1NO, 2NC, 2NO

U

44

L

L1 3.5

L

27

46 01.2010

Universal terminal

24 x 24 mm

Soldering terminal (also pluggable)

24 x 30 mm

L

L1

U

1NC+1NO

35

44.5

-

2NC+2NO

42.5

-

-

3NC+3NO

50

-

-

4NC+4NO

57.5

-

Ø 25 mm 3

2.8 x 0.5

1.5 ... 5

Soldering terminal

17 Keylock switch actuator 2 positions, flush mounting page 15

U

1NC, 1NO, 1NC+1NO, 2NC, 2NO

44.5

51

Drawings

Universal terminal

24 x 24 mm

Soldering terminal (also pluggable)

1.5 ... 6

Soldering terminal

18 Selector switch actuator 2 positions, flush mounting page 19

L

L1

U

1NC+1NO

41

48

-

2NC+2NO

48.5

-

-

3NC+3NO

56

-

-

4NC+4NO

63.5

-

Ă&#x2DC; 25 mm

2.8 x 0.5

3

L1

U

-

1NC, 1NO, 1NC+1NO, 2NC, 2NO

48

2 9.5

L

Universal terminal

Combined terminal + diodes

L

L1

U

H+D

1NC+1NO

32

36

-

-

2NC+2NO

39.5

-

-

-

3NC+3NO

47

-

-

-

4NC+4NO

Soldering terminal

Soldering terminal (also pluggable)

19 Selector switch 2 positions page 11

1.5 ... 6

18 x 24 mm

18 x 18 mm 2.8 x 0.5

3

L1 6

Ă&#x2DC; 18 mm

U

L

H+D

54.5

-

-

-

1NC+1NO+D

-

-

-

43.5

2NC+2NO+D

-

-

-

51

39

-

1NC, 1NO, 1NC+1NO, 2NC, 2NO

14

Circuit drawing 1 Indicator actuator page 7 | Indicator actuator, flush mounting page 13 a-(x1)

b+(x2)

2 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

3

1

2

3

1

4

2

3

1

4

2

3

x1-

4

x2+

IV

III

II

I

4

2

3 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

3

1

2

3

1

4

2

3

x1-

4

x2+

III

II

I

4

2

47 01.2010

51

Drawings 4 Illuminated pushbutton actuator page 8 1

3

1

I

2

3

a-

3(+)

4

b+

4(-)

II

2

4

5 Illuminated pushbutton actuator page 8 1

3

1

I

2

3

a-

3(+) 1(-)

4

b+

4(-) 2(+)

II

2

4

6 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

1

3

2

3

x1-

4

x2+

II

I

2

4

7 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

3

a-

4

b+

I

2

8 Illuminated pushbutton actuator page 8 1

3

a-

3(+)

4

b+

4(-)

I

2

9 Illuminated pushbutton actuator page 8 1

3

a-

3(+) 1(-)

4

b+

4(-) 2(+)

I

2

10 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

3

x1-

4

x2+

I

2

11 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

a-

2

b+

48 01.2010

51

Drawings 12 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

3

a-

2

4

b+

13 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

a-

2

b+

14 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

3

a-

2

4

b+

15 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

3

a-

2

4

b+

16 Selector switch 3 positions page 12 | Selector switch actuator 3 positions, flush mounting page 20 1

3

1

2

3

a-

4

b+

B

C

4

2

17 Selector switch 3 positions page 12 | Selector switch actuator 3 positions, flush mounting page 20 1

3

1

2

3

a-

4

b+

B

C

4

2

18 Selector switch 3 positions page 12 | Selector switch actuator 3 positions, flush mounting page 20 1

3

1

2

3

a-

4

b+

B

C

4

2

19 Selector switch 3 positions page 12 | Selector switch actuator 3 positions, flush mounting page 20 1

3

1

2

3

a-

4

b+

B

C

4

2

49 01.2010

51

Drawings 20 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

3

1

I

2

3

1

II

2

4

3

1

III

2

4

3

x1-

4

x2+

IV

2

4

21 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

3

1

I

2

3

1

II

2

4

3

x1-

4

x2+

III

2

4

22 Selector switch 2 positions page 11 1

1

3

2

3

a-

3(+)

4

b+

4(-)

3

a-

3(+) 1(-)

4

b+

4(-) 2(+)

II

I

2

4

23 Selector switch 2 positions page 11 1

1

3

II

I

2

2

4

24 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

1

3

2

3

x1-

4

x2+

II

I

2

4

25 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

3

a-

4

b+

I

2

26 Selector switch 2 positions page 11 1

3

a-

3(+)

4

b+

4(-)

I

2

27 Selector switch 2 positions page 11 1

3

a-

3(+) 1(-)

4

b+

4(-) 2(+)

I

2

50 01.2010

51

Drawings 28 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

3

x1-

4

x2+

I

2

29 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

a-

2

b+

30 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

3

a-

2

4

b+

31 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

a-

2

b+

32 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

3

a-

2

4

b+

33 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

3

a-

2

4

b+

34 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

3

1

2

3

1

4

2

3

1

4

2

3

x1-

4

x2+

IV

III

II

I

4

2

35 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

3

1

2

3

1

4

2

3

x1-

4

x2+

III

II

I

4

2

51 01.2010

51

Drawings 36 Selector switch 2 positions page 11 1

3

1

I

2

3

a-

3(+)

4

b+

4(-)

3

a-

3(+) 1(-)

4

b+

4(-) 2(+)

II

2

4

37 Selector switch 2 positions page 11 1

3

1

I

2

II

2

4

38 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

1

3

2

3

x1-

4

x2+

II

I

2

4

39 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

3

a-

4

b+

I

2

40 Selector switch 2 positions page 11 1

3

a-

3(+)

4

b+

4(-)

I

2

41 Selector switch 2 positions page 11 1

3

a-

3(+) 1(-)

4

b+

4(-) 2(+)

I

2

42 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

3

x1-

4

x2+

I

2

43 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19

52 01.2010

1

a-

2

b+

51

Drawings 44 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

3

a-

2

4

b+

45 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

a-

2

b+

46 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

3

a-

2

4

b+

47 Selector switch 2 positions page 11 | Selector switch actuator 2 positions, flush mounting page 19 1

3

a-

2

4

b+

48 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

3

1

2

1

3

4

2

1

3

2

4

3

x1-

4

x2+

IV

III

II

I

2

4

49 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

3

1

2

1

3

4

2

3

x1-

4

x2+

III

II

I

2

4

50 Illuminated pushbutton actuator page 8 1

3

1

2

3

a-

3(+)

4

b+

4(-)

II

I

4

2

51 Illuminated pushbutton actuator page 8 1

3

1

2

3

a-

3(+) 1(-)

4

b+

4(-) 2(+)

II

I

4

2

53 01.2010

51

Drawings 52 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

3

1

I

2

3

x1-

4

x2+

II

2

4

53 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

3

x1-

4

x2+

I

2

54 Illuminated pushbutton actuator page 8 1

3

a-

3(+)

4

b+

4(-)

I

2

55 Illuminated pushbutton actuator page 8 1

3

a-

3(+) 1(-)

4

b+

4(-) 2(+)

I

2

56 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

3

x1-

4

x2+

I

2

57 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

a-

2

b+

58 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

3

a-

2

4

b+

59 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

a-

2

b+

54 01.2010

51

Drawings 60 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

3

a-

2

4

b+

61 Illuminated pushbutton actuator page 8 | Illuminated pushbutton actuator, flush mounting page 14 1

3

a-

2

4

b+

62 Keylock switch 3 positions page 10 | Keylock switch actuator 3 positions, flush mounting page 18 1

1

3

2

3 B

C

2

4

4

63 Keylock switch 3 positions page 10 | Keylock switch actuator 3 positions, flush mounting page 18 1

1

3

2

3 B

C

2

4

4

64 Keylock switch 3 positions page 10 | Keylock switch actuator 3 positions, flush mounting page 18 1

1

3

2

3 B

C

2

4

4

65 Keylock switch 3 positions page 10 | Keylock switch actuator 3 positions, flush mounting page 18 1

1

3

2

3 B

C

2

4

4

66 Keylock switch 2 positions page 9 | Keylock switch actuator 2 positions, flush mounting page 15 1

3 I

2

4

67 Keylock switch 2 positions page 9 | Keylock switch actuator 2 positions, flush mounting page 15 1

3

1

2

3 II

I

4

2

4

55 01.2010

51

Drawings 68 Keylock switch 2 positions page 9 | Keylock switch actuator 2 positions, flush mounting page 15 1

3

1

I

2

3

1

II

4

2

3 III

4

2

4

69 Keylock switch 2 positions page 9 | Keylock switch actuator 2 positions, flush mounting page 15 1

3

1

I

2

3

1

II

4

2

3

1

III

4

2

3 IV

4

2

4

70 Keylock switch 2 positions page 9 | Keylock switch actuator 2 positions, flush mounting page 15 1

3

2

4

71 Keylock switch 2 positions page 9 | Keylock switch actuator 2 positions, flush mounting page 15 1

3

2

4

72 Keylock switch 2 positions page 9 | Keylock switch actuator 2 positions, flush mounting page 15 1

3 I

2

4

73 Keylock switch 2 positions page 9 | Keylock switch actuator 2 positions, flush mounting page 15 1

3

1

2

3 II

I

4

2

4

74 Keylock switch 2 positions page 9 | Keylock switch actuator 2 positions, flush mounting page 15 1

3

1

2

3

1

4

2

3 III

II

I

4

2

4

75 Keylock switch 2 positions page 9 | Keylock switch actuator 2 positions, flush mounting page 15 1

3

1

2

56 01.2010

3

1

4

2

3

1

4

2

3 IV

III

II

I

4

2

4

51

Drawings 76 Keylock switch 2 positions page 9 | Keylock switch actuator 2 positions, flush mounting page 15 1

3

2

4

77 Keylock switch 2 positions page 9 | Keylock switch actuator 2 positions, flush mounting page 15 1

3

2

4

78 Indicator actuator page 7 a-(x1)

3(+)

b+(x2)

4(-)

79 Indicator actuator page 7 a-(x1)

3(+)

1(-)

b+(x2)

4(-)

2(+)

57 01.2010

Index from Typ-Nr. Typ-Nr.

Page

01-907 ........................................31 01-928 ........................................29 01-929 ........................................29 02-904.0 .....................................30 02-904.1 .....................................30 02-904.3 .....................................30 02-904.7 .....................................30 02-905 ........................................31 02-912.1 .....................................30 02-912.2 .....................................30 02-912.3 .....................................30 02-912.4 .....................................30 10-1306.1349 .............................29 10-1307.1369 .............................29 10-1309.1309 .............................29 10-1310.1319 .............................29 10-1311.1249 .............................29 10-1312.1229 .............................29 10-1313.1209 .............................29 10-1313.1249 .............................29 10-1316.1179 .............................29 10-1316.1209 .............................29 10-1319.1179 .............................29 10-1319.1199 .............................29 10-2J06.3142 .............................30 10-2J06.3144 .............................30 10-2J06.3145 .............................30 10-2J06.3146 .............................30 10-2J06.3149 .............................30 10-2J09.1062 .............................30 10-2J09.1064 .............................30 10-2J09.1065 .............................30 10-2J09.1066 .............................30 10-2J09.1069 .............................30 10-2J12.1062 .............................30 10-2J12.1064 .............................30 10-2J12.1065 .............................30 10-2J12.1066 .............................30 10-2J12.1069 .............................30 10-2J13.1062 .............................30 10-2J13.1064 .............................30 10-2J13.1065 .............................30 10-2J13.1066 .............................30 10-2J13.1069 .............................30 10-2J19.1042 .............................30 10-2J19.1044 .............................30 10-2J19.1045 .............................30 10-2J19.1046 .............................30 10-2J19.1049 .............................30 31-928 ........................................29 31-929 ........................................29 31-940 ........................................28 31-941 ........................................28 31-942 ........................................28 31-945 ........................................29 31-946 ........................................29 31-985.0 .....................................28 31-989.300 .................................28 31-989.311 .................................28 31-991 ........................................31 51-030.002 ...................................7 51-030.005 ...................................7 51-031.006 ...................................7 58 01.2010

Typ-Nr.

Page

51-040.002 ...................................7 51-040.005 ...................................7 51-041.006 ...................................7 51-050.002 ...................................7 51-050.002F ...............................13 51-050.005 ...................................7 51-050.005F ...............................13 51-051.006 ...................................7 51-051.006F ...............................13 51-121.022 ...................................8 51-121.0252 .................................8 51-122.0252 .................................8 51-123.0252 .................................8 51-124.0252 .................................8 51-131.022 ...................................8 51-131.0252 .................................8 51-132.0252 .................................8 51-133.0252 .................................8 51-134.0252 .................................8 51-135.022D .................................9 51-135.022DF ............................16 51-135.025D2 ...............................9 51-135.025D2F ..........................16 51-136.025D2 ...............................9 51-136.025D2F ..........................16 51-137.025D2 ...............................9 51-137.025D2F ..........................16 51-138.025D2 ...............................9 51-138.025D2F ..........................16 51-141.022D .................................9 51-141.022DF ............................17 51-141.025D2 ...............................9 51-141.025D2F ..........................17 51-142.025D2 ...............................9 51-142.025D2F ..........................17 51-143.025D2 ...............................9 51-143.025D2F ..........................17 51-144.025D2 ...............................9 51-144.025D2F ..........................17 51-145.022D .................................9 51-145.022DF ............................15 51-145.025D2 ...............................9 51-145.025D2F ..........................15 51-146.025D2 ...............................9 51-146.025D2F ..........................15 51-147.025D2 ...............................9 51-147.025D2F ..........................15 51-148.025D2 ...............................9 51-148.025D2F ..........................15 51-151.022 ...................................8 51-151.022F ...............................14 51-151.0252 .................................8 51-151.0252F .............................14 51-152.0252 .................................8 51-152.0252F .............................14 51-153.0252 .................................8 51-153.0252F .............................14 51-154.0252 .................................8 51-154.0252F .............................14 51-155.022D .................................9 51-155.022DF ............................15 51-155.025D2 ...............................9 51-155.025D2F ..........................15

Typ-Nr.

Page

51-156.025D2 ...............................9 51-156.025D2F ..........................15 51-157.025D2 ...............................9 51-157.025D2F ..........................15 51-158.025D2 ...............................9 51-158.025D2F ..........................15 51-195.022D .................................9 51-195.022DF ............................16 51-195.025D2 ...............................9 51-195.025D2F ..........................16 51-196.025D2 ...............................9 51-196.025D2F ..........................16 51-197.025D2 ...............................9 51-197.025D2F ..........................16 51-198.025D2 ...............................9 51-198.025D2F ..........................16 51-235.022D .................................9 51-235.022DF ............................16 51-235.025D2 ...............................9 51-235.025D2F ..........................16 51-236.025D2 ...............................9 51-236.025D2F ..........................16 51-237.025D2 ...............................9 51-237.025D2F ..........................16 51-238.025D2 ...............................9 51-238.025D2F ..........................16 51-255.022D .................................9 51-255.022DF ............................15 51-255.025D2 ...............................9 51-255.025D2F ..........................15 51-256.025D2 ...............................9 51-256.025D2F ..........................15 51-257.025D2 ...............................9 51-257.025D2F ..........................15 51-258.025D2 ...............................9 51-258.025D2F ..........................15 51-261.022 ...................................8 51-261.0252 .................................8 51-262.0252 .................................8 51-263.0252 .................................8 51-264.0252 .................................8 51-271.022 ...................................8 51-271.0252 .................................8 51-272.0252 .................................8 51-273.0252 .................................8 51-274.0252 .................................8 51-281.022 ...................................8 51-281.022F ...............................14 51-281.0252 .................................8 51-281.0252F .............................14 51-282.0252 .................................8 51-282.0252F .............................14 51-283.0252 .................................8 51-283.0252F .............................14 51-284.0252 .................................8 51-284.0252F .............................14 51-295.022D .................................9 51-295.022DF ............................16 51-295.025D2 ...............................9 51-295.025D2F ..........................16 51-296.025D2 ...............................9 51-296.025D2F ..........................16 51-297.025D2 ...............................9

Index from Typ-Nr. Typ-Nr.

Page

51-297.025D2F .......................... 16 51-298.025D2 .............................. 9 51-298.025D2F .......................... 16 51-335.022D ................................ 9 51-335.022DF ............................ 16 51-335.025D2 .............................. 9 51-335.025D2F .......................... 16 51-336.025D2 .............................. 9 51-336.025D2F .......................... 16 51-337.025D2 .............................. 9 51-337.025D2F .......................... 16 51-338.025D2 .............................. 9 51-338.025D2F .......................... 16 51-355.022D ................................ 9 51-355.022DF ............................ 15 51-355.025D2 .............................. 9 51-355.025D2F .......................... 15 51-356.025D2 .............................. 9 51-356.025D2F .......................... 15 51-357.025D2 .............................. 9 51-357.025D2F .......................... 15 51-358.025D2 .............................. 9 51-358.025D2F .......................... 15 51-361.022D .............................. 10 51-361.022DF ............................ 18 51-362.022D .............................. 10 51-362.022DF ............................ 18 51-363.022D .............................. 10 51-363.022DF ............................ 18 51-364.022D .............................. 10 51-364.022DF ............................ 18 51-365.022D .............................. 10 51-365.022DF ............................ 18 51-366.022D .............................. 10 51-366.022DF ............................ 18 51-367.022D .............................. 10 51-367.022DF ............................ 18 51-368.022D .............................. 10 51-368.022DF ............................ 18 51-371.022D .............................. 10 51-371.022DF ............................ 18 51-372.022D .............................. 10 51-372.022DF ............................ 18 51-373.022D .............................. 10 51-373.022DF ............................ 18 51-374.022D .............................. 10 51-374.022DF ............................ 18 51-375.022D .............................. 10 51-375.022DF ............................ 18 51-376.022D .............................. 10 51-376.022DF ............................ 18 51-377.022D .............................. 10 51-377.022DF ............................ 18 51-378.022D .............................. 10 51-378.022DF ............................ 18 51-381.022D .............................. 10 51-381.022DF ............................ 18 51-382.022D .............................. 10 51-382.022DF ............................ 18 51-383.022D .............................. 10 51-383.022DF ............................ 18 51-384.022D .............................. 10 51-384.022DF ............................ 18

Typ-Nr.

Page

51-385.022D .............................. 10 51-385.022DF ............................ 18 51-386.022D .............................. 10 51-386.022DF ............................ 18 51-387.022D .............................. 10 51-387.022DF ............................ 18 51-388.022D .............................. 10 51-388.022DF ............................ 18 51-395.022D ................................ 9 51-395.022DF ............................ 16 51-395.025D2 .............................. 9 51-395.025D2F .......................... 16 51-396.025D2 .............................. 9 51-396.025D2F .......................... 16 51-397.025D2 .............................. 9 51-397.025D2F .......................... 16 51-398.025D2 .............................. 9 51-398.025D2F .......................... 16 51-401.036D ................................ 9 51-401.036DF ............................ 16 51-402.036D ................................ 9 51-402.036DF ............................ 16 51-404.036D ................................ 9 51-404.036DF ............................ 16 51-405.036D ................................ 9 51-405.036DF ............................ 16 51-407.036D ................................ 9 51-407.036DF ............................ 16 51-408.036D ................................ 9 51-408.036DF ............................ 16 51-411.036D ................................ 9 51-411.036DF ............................ 16 51-412.036D ................................ 9 51-412.036DF ............................ 16 51-414.036D ................................ 9 51-414.036DF ............................ 16 51-415.036D ................................ 9 51-415.036DF ............................ 16 51-417.036D ................................ 9 51-417.036DF ............................ 16 51-418.036D ................................ 9 51-418.036DF ............................ 16 51-421.036 ................................... 8 51-422.036 ................................... 8 51-423.036 ................................... 8 51-425.036 ................................... 8 51-426.036 ................................... 8 51-427.036D ................................ 9 51-427.036DF ............................ 16 51-428.036D ................................ 9 51-428.036DF ............................ 16 51-431.036 ................................... 8 51-432.036 ................................... 8 51-433.036 ................................... 8 51-435.036 ................................... 8 51-436.036 ................................... 8 51-437.036D ................................ 9 51-437.036DF ............................ 17 51-438.036D ................................ 9 51-438.036DF ............................ 17 51-441.036D ................................ 9 51-441.036DF ............................ 15 51-442.036D ................................ 9

Typ-Nr.

Page

51-442.036DF ............................ 15 51-444.036D ................................9 51-444.036DF ............................ 15 51-445.036D ................................9 51-445.036DF ............................ 15 51-447.036D ................................9 51-447.036DF ............................ 15 51-448.036D ................................9 51-448.036DF ............................ 15 51-451.036 ...................................8 51-451.036F ............................... 14 51-452.036 ...................................8 51-452.036F ............................... 14 51-453.036 ...................................8 51-453.036F ............................... 14 51-455.036 ...................................8 51-455.036F ............................... 14 51-456.036 ...................................8 51-456.036F ............................... 14 51-457.036D ................................9 51-457.036DF ............................ 15 51-458.036D ................................9 51-458.036DF ............................ 15 51-461.036 ...................................8 51-462.036 ...................................8 51-463.036 ...................................8 51-465.036 ...................................8 51-466.036 ...................................8 51-471.036 ...................................8 51-472.036 ...................................8 51-473.036 ...................................8 51-475.036 ...................................8 51-476.036 ...................................8 51-481.036 ...................................8 51-481.036F ............................... 14 51-482.036 ...................................8 51-482.036F ............................... 14 51-483.036 ...................................8 51-483.036F ............................... 14 51-485.036 ...................................8 51-485.036F ............................... 14 51-486.036 ...................................8 51-486.036F ............................... 14 51-495.022D ................................9 51-495.022DF ............................ 16 51-495.025D2 .............................. 9 51-495.025D2F .......................... 16 51-496.025D2 .............................. 9 51-496.025D2F .......................... 16 51-497.025D2 .............................. 9 51-497.025D2F .......................... 16 51-498.025D2 .............................. 9 51-498.025D2F .......................... 16 51-701.006 ...................................7 51-702.006 ...................................7 51-703.006 ...................................7 51-704.006 ...................................7 51-705.0292 ................................. 8 51-706.0292 ................................. 8 51-707.0292 ................................. 8 51-708.0292 ................................. 8 51-709.0292 ................................. 8 51-710.0292 ................................. 8 59 01.2010

Index from Typ-Nr. Typ-Nr.

Page

51-711.0292 .................................8 51-712.0292 .................................8 51-713.0292 .................................8 51-714.0292 .................................8 51-715.0292 .................................8 51-716.0292 .................................8 51-717.0292 .................................8 51-718.0292 .................................8 51-719.0292 .................................8 51-720.0292 .................................8 51-741.006 ...................................7 51-742.006 ...................................7 51-743.0292 .................................8 51-744.0292 .................................8 51-745.0292 .................................8 51-746.0292 .................................8 51-747.0292 .................................8 51-748.0292 .................................8 51-749.0292 .................................8 51-750.0292 .................................8 51-901.0 .....................................21 51-901.2 .....................................21 51-901.3 .....................................21 51-901.4 .....................................21 51-901.5 .....................................21 51-901.6 .....................................21 51-901.8 .....................................21 51-901.9 .....................................21 51-903.1 .....................................21 51-903.2 .....................................21 51-903.3 .....................................21 51-903.4 .....................................21 51-903.5 .....................................21 51-903.6 .....................................21 51-903.7 .....................................21 51-904.2 .....................................21 51-904.3 .....................................21 51-904.4 .....................................21 51-904.5 .....................................21 51-904.6 .....................................21 51-904.7 .....................................21 51-905.2 .....................................21 51-905.4 .....................................21 51-905.5 .....................................21 51-905.7 .....................................21 51-906.2 .....................................21 51-906.4 .....................................21 51-906.5 .....................................21 51-906.7 .....................................21 51-910 ........................................31 51-920 ........................................27 51-925 ........................................27 51-931.0 .....................................21 51-931.2 .....................................21 51-931.3 .....................................21 51-931.4 .....................................21 51-931.5 .....................................21 51-931.6 .....................................21 51-931.8 .....................................21 51-931.9 .....................................21 51-933.1 .....................................21 51-933.2 .....................................21 51-933.3 .....................................21 60 01.2010

Typ-Nr.

Page

51-933.4 .....................................21 51-933.5 .....................................21 51-933.6 .....................................21 51-933.7 .....................................21 51-935.2 .....................................21 51-935.4 .....................................21 51-935.5 .....................................21 51-935.7 .....................................21 51-938 ........................................31 51-943.0 .....................................28 51-943.1 .....................................29 51-943.9 .....................................32 51-947.0 .....................................27 51-948.0 .....................................27 51-949.0 .....................................27 51-951.0 .....................................21 51-951.2 .....................................21 51-951.3 .....................................21 51-951.4 .....................................21 51-951.5 .....................................21 51-951.6 .....................................21 51-951.8 .....................................21 51-951.9 .....................................21 51-953.1 .....................................21 51-953.2 .....................................21 51-953.3 .....................................21 51-953.4 .....................................21 51-953.5 .....................................21 51-953.6 .....................................21 51-953.7 .....................................21 51-954.2 .....................................21 51-954.3 .....................................21 51-954.4 .....................................21 51-954.5 .....................................21 51-954.6 .....................................21 51-954.7 .....................................21 51-955.2 .....................................21 51-955.4 .....................................21 51-955.5 .....................................21 51-955.7 .....................................21 52-131.022 .................................11 52-131.022 .................................19 52-131.0252 ...............................11 52-131.0252 ...............................19 52-132.0252 ...............................11 52-132.0252 ...............................19 52-133.0252 ...............................11 52-133.0252 ...............................19 52-134.0252 ...............................11 52-134.0252 ...............................19 52-271.022 .................................11 52-271.022 .................................19 52-271.0252 ...............................11 52-271.0252 ...............................19 52-272.0252 ...............................11 52-272.0252 ...............................19 52-273.0252 ...............................11 52-273.0252 ...............................19 52-274.0252 ...............................11 52-274.0252 ...............................19 52-431.036 .................................11 52-431.036 .................................19 52-432.036 .................................11

Typ-Nr.

Page

52-432.036 .................................19 52-433.036 .................................11 52-433.036 .................................19 52-435.036 .................................11 52-435.036 .................................19 52-436.036 .................................11 52-436.036 .................................19 52-471.036 .................................11 52-471.036 .................................19 52-472.036 .................................11 52-472.036 .................................19 52-473.036 .................................11 52-473.036 .................................19 52-475.036 .................................11 52-475.036 .................................19 52-476.036 .................................11 52-476.036 .................................19 52-571.022A ...............................12 52-571.022A ...............................20 52-572.022A ...............................12 52-572.022A ...............................20 52-573.022A ...............................12 52-573.022A ...............................20 52-574.022A ...............................12 52-574.022A ...............................20 52-743.0292 ...............................11 52-744.0292 ...............................11 52-745.0292 ...............................11 52-746.0292 ...............................11 52-747.0292 ...............................11 52-748.0292 ...............................11 52-749.0292 ...............................11 52-750.0292 ...............................11 52-928.0 .....................................24 52-928.20 ...................................24 52-928.30 ...................................24 52-928.40 ...................................24 52-928.50 ...................................24 52-928.60 ...................................24 52-929.20 ...................................24 52-929.30 ...................................24 52-929.40 ...................................24 52-929.50 ...................................24 52-929.60 ...................................24 52-929.8 .....................................24 52-929.9 .....................................24 52-950.0 .....................................23 52-952.0 .....................................23 61-9028.0 ...................................24 61-9028.20 .................................24 61-9028.30 .................................24 61-9028.40 .................................24 61-9028.50 .................................24 61-9028.60 .................................24 61-9028.9 ...................................24 61-9029.20 .................................24 61-9029.30 .................................24 61-9029.40 .................................24 61-9029.50 .................................24 61-9029.60 .................................24 61-9029.8 ...................................24 61-9029.9 ...................................24 61-9451.0 ...................................27

Index from Typ-Nr. Typ-Nr.

Page

61-9452.0 ................................... 27 61-9453.0 ................................... 27 61-9593.0 ................................... 23 61-9593.2 ................................... 23 61-9593.4 ................................... 23 61-9593.5 ................................... 23 61-9642.1 ................................... 21 61-9642.2 ................................... 21 61-9642.3 ................................... 21 61-9642.4 ................................... 21 61-9642.5 ................................... 21 61-9642.6 ................................... 21 61-9642.7 ................................... 21 61-9643.201 ............................... 22 61-9643.202 ............................... 22 61-9643.203 ............................... 22 61-9643.301 ............................... 22 61-9643.401 ............................... 22 61-9643.501 ............................... 22 61-9643.502 ............................... 22 61-9643.503 ............................... 22 61-9643.601 ............................... 22 61-9643.602 ............................... 22 61-9643.603 ............................... 22 61-9643.701 ............................... 22 61-9643.702 ............................... 22 61-9643.703 ............................... 22 61-9671.1 ................................... 21 61-9671.2 ................................... 21 61-9671.3 ................................... 21 61-9671.4 ................................... 21 61-9671.5 ................................... 21 61-9671.6 ................................... 21 61-9671.7 ................................... 21 61-9681.1 ................................... 21 61-9681.2 ................................... 21 61-9681.3 ................................... 21 61-9681.4 ................................... 21 61-9681.5 ................................... 21 61-9681.6 ................................... 21 61-9681.7 ................................... 21 61-9707.7 ................................... 22 61-9730.0 ................................... 31 61-9740.0 ................................... 31 61-9771.0 ................................... 21 61-9771.8 ................................... 21 61-9771.9 ................................... 21 61-9781.0 ................................... 21 61-9781.8 ................................... 21 61-9781.9 ................................... 21 61-9841.0 ................................... 23 61-9841.0A ................................ 22 61-9841.2 ................................... 23 61-9841.2A ................................ 22 61-9841.4 ................................... 23 61-9841.4A ................................ 22 61-9841.5 ................................... 23 61-9841.5A ................................ 22 61-9841.6 ................................... 23 61-9841.6A ................................ 22 61-9841.8 ................................... 23 61-9841.8A ................................ 22 61-9842.0 ................................... 23

Typ-Nr.

Page

Typ-Nr.

Page

61-9842.2 ................................... 23 61-9842.4 ................................... 23 61-9842.5 ................................... 23 61-9842.6 ................................... 23 61-9842.8 ................................... 23 61-9921.0 ................................... 27 61-9922.0 ................................... 27 61-9924.0 ................................... 27 61-9927.2 ................................... 26 61-9930.0 ................................... 25 61-9930.0 ................................... 26 61-9930.4 ................................... 25 61-9930.4 ................................... 26 61-9931.0 ................................... 25 61-9931.0 ................................... 26 61-9931.4 ................................... 25 61-9931.4 ................................... 26 61-9932.0 ................................... 26 61-9932.0 ................................... 26 61-9932.1 ................................... 26 61-9932.1 ................................... 26 61-9932.10 ................................. 26 61-9932.10 ................................. 26 61-9932.2 ................................... 26 61-9932.2 ................................... 26 61-9932.4 ................................... 26 61-9932.4 ................................... 26 61-9932.5 ................................... 26 61-9932.5 ................................... 26 61-9932.6 ................................... 26 61-9932.6 ................................... 26 61-9933.0 ................................... 25 61-9933.0 ................................... 25 61-9933.1 ................................... 25 61-9933.1 ................................... 25 61-9933.10 ................................. 25 61-9933.10 ................................. 25 61-9933.2 ................................... 25 61-9933.2 ................................... 25 61-9933.4 ................................... 25 61-9933.4 ................................... 25 61-9933.5 ................................... 25 61-9933.5 ................................... 25 61-9933.6 ................................... 25 61-9933.6 ................................... 25 61-9934.8 ................................... 25 61-9936.0 ................................... 26 61-9980.0 ................................... 24 704.968.0 ................................... 25 704.968.1 ................................... 25 84-9103.7 ................................... 26

61 01.2010

Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail

EAO reserves the right to alter specifications without further notice

E-mail Website

EAO AG Tannwaldstrasse 88 4601 Olten, Switzerland info@eao.com www.eao.com Austria +49 201 85 87 0 +49 201 85 87 210 sales.ede@eao.com Belgium +32 3 777 82 36 +32 3 777 84 19 sales.ebl@eao.com China +852 27 86 91 41 +852 27 86 95 61 sales.ehk@eao.com France +33 1 64 43 37 37 +33 1 64 43 37 49 sales.ese@eao.com Germany +49 201 85 87 0 +49 201 85 87 210 sales.ede@eao.com Italy +39 035 481 0189 +39 035 481 3786 sales.eit@eao.com Japan +81 3 5444 5411 +81 3 5444 0345 sales.esj@eao.com Netherlands +31 78 653 17 00 +31 78 653 17 99 sales.enl@eao.com Sweden +46 8 683 86 60 +46 8 724 29 12 sales.esw@eao.com Switzerland +41 62 388 95 00 +41 62 388 95 55 sales.ech@eao.com United Kingdom +44 1444 236 000 +44 1444 236 641 sales.euk@eao.com USA +1 203 877 4577 +1 203 877 3694 sales.eus@eao.com Other Countries +41 62 286 92 10 +41 62 296 21 62 info@eao.com