UL iQ™ for Plastics
Seite 1 von 2
E41613
Component - Plastics
BAYER MATERIALSCIENCE AG CHEMPARK, GEBAEUDE B207, LEVERKUSEN 51368 DE
FR110 + (z) Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS), "Bayblend", furnished as pellets Color ALL
Min Thk (mm) 0.75 1.0 1.2 1.5 2.0 3.0
Flame Class V-2 V-2 V-1 V-0 V-0, 5VB V-0,5VA,RP15
HWI 2 2 1
Comparative Tracking Index (CTI): 0
RTI Elec 95 95 95 95 95 95
HAI 0 0 0
RTI Imp 85 85 85
RTI Str 85 85 90
Inclined Plane Tracking (IPT): Volume Resistivity (10x ohm-cm) : 15
Dielectric Strength (kV/mm): 28 High-Voltage Arc Tracking Rate 4 (HVTR): Dimensional Stability (%): 0.0
High Volt, Low Current Arc Resis (D495): 6
(z) - Material designation and color code may be followed by up to three letters and/or three numbers (does not include grades which are separately recognized with above material designation and suffix) + - Material designations may be followed by a six digit numerical code denoting color. ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.
Report Date: 1978-06-06 Last Revised: 2012-12-12
© 2013 UL LLC
IEC and ISO Test Methods Test Name
Test Method
Units
Flammability
IEC 60695-11-10, IEC 60695-11-20
Class (color)
Thickness Tested (mm) 0.75
V-2 (ALL)
1.0 1.2 1.5 2.0
V-2 (ALL) V-1 (ALL) V-0 (ALL) V-0, 5VB (ALL) V-0,5VA,RP15 (ALL)
3.0 Glow-Wire Flammability (GWFI)
Glow-Wire Ignition (GWIT)
IEC Comparative Tracking Index IEC Ball Pressure ISO Heat Deflection (1.80 MPa) ISO Tensile Strength ISO Flexural Strength
IEC 60695-2-12
Value
C
1.0
960
C
1.2 1.5 2.0 3.0 1.0 1.2 1.5 2.0 3.0
960 960 960 960 850 850 850 850 850
Volts (Max)
-
-
IEC 60695-10-2
C
-
-
ISO 75-2
C
-
-
ISO 527-2 ISO 178
MPa MPa
-
-
IEC 60695-2-13
IEC 60112
http://iq.ul.com/iq/newiq/list.aspx?ulid=232957
31.07.2013
UL iQ™ for Plastics
Seite 2 von 2
ISO Tensile Impact
ISO 8256
kJ/m2
-
-
ISO Izod Impact
ISO 180
kJ/m2
-
-
ISO Charpy Impact
ISO 179-2
kJ/m2
-
-
© 2013 UL LLC
http://iq.ul.com/iq/newiq/list.aspx?ulid=232957
31.07.2013