Page 1

UL iQ™ for Plastics

Seite 1 von 2

E41613

Component - Plastics

BAYER MATERIALSCIENCE AG CHEMPARK, GEBAEUDE B207, LEVERKUSEN 51368 DE

FR110 + (z) Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS), "Bayblend", furnished as pellets Color ALL

Min Thk (mm) 0.75 1.0 1.2 1.5 2.0 3.0

Flame Class V-2 V-2 V-1 V-0 V-0, 5VB V-0,5VA,RP15

HWI 2 2 1

Comparative Tracking Index (CTI): 0

RTI Elec 95 95 95 95 95 95

HAI 0 0 0

RTI Imp 85 85 85

RTI Str 85 85 90

Inclined Plane Tracking (IPT): Volume Resistivity (10x ohm-cm) : 15

Dielectric Strength (kV/mm): 28 High-Voltage Arc Tracking Rate 4 (HVTR): Dimensional Stability (%): 0.0

High Volt, Low Current Arc Resis (D495): 6

(z) - Material designation and color code may be followed by up to three letters and/or three numbers (does not include grades which are separately recognized with above material designation and suffix) + - Material designations may be followed by a six digit numerical code denoting color. ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 1978-06-06 Last Revised: 2012-12-12

© 2013 UL LLC

IEC and ISO Test Methods Test Name

Test Method

Units

Flammability

IEC 60695-11-10, IEC 60695-11-20

Class (color)

Thickness Tested (mm) 0.75

V-2 (ALL)

1.0 1.2 1.5 2.0

V-2 (ALL) V-1 (ALL) V-0 (ALL) V-0, 5VB (ALL) V-0,5VA,RP15 (ALL)

3.0 Glow-Wire Flammability (GWFI)

Glow-Wire Ignition (GWIT)

IEC Comparative Tracking Index IEC Ball Pressure ISO Heat Deflection (1.80 MPa) ISO Tensile Strength ISO Flexural Strength

IEC 60695-2-12

Value

C

1.0

960

C

1.2 1.5 2.0 3.0 1.0 1.2 1.5 2.0 3.0

960 960 960 960 850 850 850 850 850

Volts (Max)

-

-

IEC 60695-10-2

C

-

-

ISO 75-2

C

-

-

ISO 527-2 ISO 178

MPa MPa

-

-

IEC 60695-2-13

IEC 60112

http://iq.ul.com/iq/newiq/list.aspx?ulid=232957

31.07.2013


UL iQ™ for Plastics

Seite 2 von 2

ISO Tensile Impact

ISO 8256

kJ/m2

-

-

ISO Izod Impact

ISO 180

kJ/m2

-

-

ISO Charpy Impact

ISO 179-2

kJ/m2

-

-

© 2013 UL LLC

http://iq.ul.com/iq/newiq/list.aspx?ulid=232957

31.07.2013

Eao pc en45545 bayblend e41613  

http://www.eao.com/global/en/Downloads/certificates/Product_Certificates/EN45545/EAO_PC_EN45545_Bayblend_E41613.pdf