UL iQ™ for Plastics
Seite 1 von 1
E41613
Component - Plastics
BAYER MATERIALSCIENCE AG CHEMPARK, GEBAEUDE B207, LEVERKUSEN 51368 DE
1895 + (z) Polycarbonate (PC), "APEC", furnished as pellets
Color ALL
Min Thk (mm) 0.75 1.5 3.0
Flame Class HB HB HB
HWI -
HAI -
RTI Elec 150 150 150
RTI Imp 130 130
Comparative Tracking Index (CTI): -
Inclined Plane Tracking (IPT): -
Dielectric Strength (kV/mm): -
Volume Resistivity (10x ohm-cm) : -
High-Voltage Arc Tracking Rate (HVTR): Dimensional Stability (%): -
RTI Str 150 150
High Volt, Low Current Arc Resis (D495): -
(z) - Material designation and color code may be followed by up to three letters and/or three numbers (does not include grades which are separately recognized with above material designation and suffix) + - Material designations may be followed by a six digit numerical code denoting color. ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.
Report Date: 1991-05-07 Last Revised: 2011-12-12
© 2013 UL LLC
IEC and ISO Test Methods
C C Volts (Max) C C MPa MPa
Thickness Tested (mm) 0.75 1.5 3.0 -
Value HB75 (ALL) HB75 (ALL) HB40 (ALL) -
ISO 8256
kJ/m2
-
-
ISO Izod Impact
ISO 180
kJ/m2
-
-
ISO Charpy Impact
ISO 179-2
2
-
-
Test Name Flammability
Test Method IEC 60695-11-10
Units Class (color)
Glow-Wire Flammability (GWFI) Glow-Wire Ignition (GWIT) IEC Comparative Tracking Index IEC Ball Pressure ISO Heat Deflection (1.80 MPa) ISO Tensile Strength ISO Flexural Strength
IEC 60695-2-12 IEC 60695-2-13 IEC 60112 IEC 60695-10-2 ISO 75-2 ISO 527-2 ISO 178
ISO Tensile Impact
kJ/m
© 2013 UL LLC
http://iq.ul.com/iq/newiq/list.aspx?ulid=508368
31.07.2013