Sealers booklet

Clean-it Brick and Masonry

Clean-it Ceramic and Porcelain

Clean-it Daily Cleaner

Clean-it Grout Cleaner

Clean-it Grout Residue Remover

Clean-it Heavy Duty Cleaner

Clean-it Mould Remover

Clean-it Rust Remover

Clean-it Stainless Steel Cleaner

Clean-it Ultra Clean

Polish-it Polish and Shine

Polish-it Polish and Protect Matt

Protect-it Protect-it Protect-it Brick Colour Grout and Enhancing Masonry

Protect-it Marble Granite Travertine

Protect-it Natural Look

Protect-it Porcelain Tiles

Protect-it Wall Cladding

Strip-it Ultra Strip

Strip-it Wax Remover

Seal-it Cement Finishes

Seal-it Gloss Sealer

Seal-it Seal-it Seal-it Industrial Polyurethane Premium Concrete Sealer Sealer

Seal-it Sandstone Tiles

Seal-it Stone Seal

Seal-it Stone Seal Matt

AREA

Surface Treatments

Treatment Guide for common problems Clean-it Clean-it Clean-it Daily Ceramic Brick Cleaner and and Masonry Porcelain





































Interior























Exterior

































▲

▲



































Floor

Floor





















▲

▲



































LOCATION

Exterior









 

 

 

 

 



▲

▲

 



 

 

 

 

 

 

 

 















 













Colour enhancing



High gloss



▲

 

Natural look



No sheen



Penetrating



Water- and oil repellent











































Water repellent





















Blood

▲

Do not use on fabrics

▲











Do not use on acid sensitive surfaces

Dirt - general 











▲

Test first on polished natural stone

▲

Test first on polished natural stone

▲

Coffee Crayon



Do not use on acid sensitive surfaces

▲





▲ ▲

Dirt in grout lines

▲

Graffiti 

 

Cement tiles



Cement-based wall finishes















▲













Ceramics - unglazed













▲





Ceramics - glazed

▲

▲







Clay paving bricks







































Concrete - polished Concrete floors - industrial



Granite - flamed and honed



Granite - polished



  ▲



Limestone - honed, natural, textured







▲

▲

Limestone - polished







▲

▲

Marble - honed, natural, textured, tumbled







▲

▲

Marble - polished







▲

▲

Porcelain - textured tile





Quarry tiles



Quartzite - natural



▲



































▲



▲

Lime deposits Mortar



Mustard

Copper residues may turn green

▲

Oil











Paint removal















Pencil marks













Red soil













Rubber mallet marks Rubber shoe marks











Do not use on fabric

▲

























 









 









Test first on polished natural stone

▲

Will remove the existing sealer Test first on polished natural stone

▲



Do not use on acid sensitive surfaces

▲

Test first on polished natural stone

▲

Test first on polished natural stone

▲

Rust

Do not use on synthetic resin surfaces

▲

Test first on polished natural stone

▲ ▲

Varnishes Wax Wine stains





▲

Sealers - unwanted or damaged



Test first on polished natural stone

 ▲





Do not use on acid sensitive surfaces

▲

Mould and mildew 

 

 

▲

Will remove the existing sealer

▲ Test first on polished natural stone

▲ Preferred product

 Alternative product

 ▲

▲

▲



▲

Quartzite - polished



Rosa Stone



▲

▲









 

















▲

▲









Sandstone - natural







▲

▲









Sandstone - polished





▲

▲







Slasto









▲

▲

Slate - natural









Slate - polished











▲

 







   









 



Sandstone - honed

Stainless steel, aluminium and chrome

▲











Ink

Tomato sauce





▲





Do not use on acid sensitive surfaces

Grease





 







































Jade

Porcelain - polished tile





Grout joints







Only use on unsealed or unpainted surfaces

▲

Grout residue



▲

 









Coloured granolithic floors and tops





Clay face bricks

 











Terracotta - high porosity













▲

▲

Terracotta - low porosity (NCI/Vitro)













▲

▲



Terracotta - medium porosity













▲

▲







▲

▲





Terrazzo - polished



Terrazzo - textured





▲

▲



Travertine - honed, natural, tumbled







▲

▲



Travertine - polished







Wall cladding - natural stone

▲

Cement residue





Cement counter tops

Wall cladding - masonry and brick

▲

Bird droppings Calcium deposits

SURFACE

Coloured levelling compound

PRECAUTIONS

Chalk lines

Water resistant Cement bricks, paving and cobbles

PROBLEM OR STAIN Algae

PROPERTIES

Strip-it Wax Remover







Strip-it Ultra Strip







Clean-it Ultra Clean







Clean-it Clean-it Rust Mould Remover Remover







Clean-it Heavy Duty Cleaner

Wall 

Interior

Clean-it Grout Residue Remover

AREA

Wall

LOCATION

Clean-it Grout Cleaner





















































 





























 

Saint-Gobain Construction Products SA (Pty) Ltd 77 Ostend Road, Germiston South, Johannesburg Tel.: +27 11 345-5300 Fax: +27 11 345-5301 Sales : 0860 27 28 29 or visit www.weber-tylon.co.za

To the best of our knowledge and belief, this information is true and accurate. As the conditions of use and any labour involved are beyond our control, the end-user must satisfy himself by prior testing that the product is suitable for his specific application. Products are sold subject to our Standard Conditions of Sale.

Clean-it Brick and Masonry is an inhibited acid-based cleaner for the removal of cement- and mortar residues.

Suitable for use on clay face bricks, clay paving bricks, natural stone, slate, terracotta, glazed- and unglazed ceramics.

Also suitable for etching concrete floors prior to coating.

Not for use on marble, travertine, limestone, cement tiles and pavers or terrazzo. Certain clay face bricks contain copper residues and could turn green with use of Clean-it Brick and Masonry.

Always test on a small area first.

For interior and exterior use.

Clean-it Rust Remover is an acid-based gel cleaner designed to remove red soil stains, rust, air- and carbon pollution, oxidisation, mould- and mildew stains. Safer than conventional acid-based cleaners.

Suitable for use on unpolished and acid-resistant natural stone, unsealed concrete and masonry surfaces, terracottaand quarry tiles. May be used on walls and floors.

Not for use on polished- or acid-sensitive stone like marble, travertine and limestone. Acid-based products will etch and lighten most cement- and masonry surfaces. It is recommended that the surface be sealed after cleaning.

For interior and exterior use.

Available in 1 and 5 litre packs

Protect-it Brick and Masonry is a superior quality, natural look, no sheen, no surface film, solvent-based penetrating water repellent.

Provides protection against rain, moisture, general airborne dirt, pollution, mould and mildew. Allows water vapour transmission.

Suitable for use on clay and cement bricks and blocks, fibre cement, concrete and masonry surfaces and natural- and artificial stone. Can also be used as a primer for silicone- and emulsion paints and resin plasters.

Expected wear - up to 15 years on vertical surfaces, depending on weather conditions, pollution, cleaning and maintenance methods.

For interior and exterior use.

Available in 1 and 5 litre packs

Seal-it Cement Finishes is a premium quality, non-yellowing solvent-based resin sealer that provides a satin finish, superior stain resistance and surface protection.

Suitable for use on coloured granolithic floors, imprint paving, cement tiles, -pavers and -cobbles. Also suitable for low traffic and domestic concrete floors.

Not suitable for use on polished stone, glazed ceramic- and porcelain tiles.

Expected wear - up to 5 years, depending on texture, hardness of surface, traffic, maintenance and use of aggressive cleaners.

For interior and exterior use.

Available in 1 and 5 litre packs

Available in 1 and 5 litre packs

Clean-it Ceramic and Porcelain is a concentrated detergent cleaner formulated for gentle every day use. Suitable for use on glazed- and unglazed ceramics, polished- and unpolished porcelain tiles.

Eliminates soap build-up and hard water deposits.

For interior and exterior use.

Clean-it Stainless Steel Cleaner is a non-abrasive product that cleans, polishes and protects stainless steel, chrome and aluminium surfaces.

Suitable for use on stainless steel fridges, appliances, toasters, kettles, work surfaces, decorative trim, aluminium and metal furniture.

Not suitable for use on marble, granite, natural stone surfaces, plastics and plastic parts.

Avoid over-application.

For interior and exterior use.

Protect-it Colour Enhancing is a premium quality, colour-enhancing, no sheen, solvent-based, penetrating water- and oil repellent for maximum stain protection. Allows water-vapour transmission.

Suitable for use on unpolished, tumbled, flamed and honed natural stone tiles including marble, travertine, granite, limestone, sandstone, quartzite, cement pavers and tiles, masonry surfaces, low porosity terracotta tiles and quarry tiles.

Expected wear - up to 15 years, depending on texture, hardness of surface, traffic, maintenance and use of aggressive cleaners.

For interior and exterior use.

Available in 1 and 5 litre packs

Available in a 300ml pack

Available in 1, 5 and 25 litre packs

Seal-it Gloss Sealer is a superior quality, natural look, non-yellowing, water-based resin sealer. Provides a protective surface shine, good stain resistance and ease of cleaning. Seals and shines in one step.

Suitable for use on limestone, sandstone, slate, quartzite, cement tiles, terracotta, terrazzo, oxided concrete and granolithic cement floors.

Not recommended for use where slippery conditions may occur, e.g. pools and showers.

Expected wear - up to 3 years, depending on texture, hardness of surface, area, traffic, maintenance, weather and use of aggressive cleaners.

For interior and exterior use.

Available in 1, 5 and 25 litre packs

Clean-it Daily Cleaner is a concentrated multi-surface detergent cleaner formulated for gentle everyday use.

Suitable for use on glazed- and unglazed ceramics, porcelain, granite, marble, travertine, sandstone, slate and all sealed surfaces including natural stone, terracotta, quarry tiles, vinyl and cement tiles.

Removes surface soiling and general dirt.

Eliminates soap build-up and hard water deposits.

For interior and exterior use.

Clean-it Ultra Clean is a water-based, biodegradable, non-scratching abrasive cream cleaner.

Suitable for use on textured ceramics, polished- and unpolished porcelain tiles and natural stone.

Clean-it Ultra Clean cannot remove grout and cement residue. Clean-it Grout Residue Remover is specifically formulated to remove grout- and cement residue, calcium deposits and lime on acid-resistant surfaces and is recommended for this purpose.

For interior and exterior use.

Protect-it Grout is a one step penetrating aerosol sealer specifically formulated for grout. Provides a no-sheen, no surface film, natural look finish.

Suitable for use on all grout joints between ceramic-, porcelain- and natural stone tiles. Prevents mould and mildew growth.

Expected wear - up to 15 years, depending on texture and hardness of grout, type of area, surface wear, traffic, frequency and type of maintenance products used, weather and use of aggressive cleaners. Re-apply every 2 to 3 years.

For interior and exterior use.

Available in 400ml, 1, 5 and 25 litre packs

Available in 1 and 5 litre packs

Available in a 400ml pack

Seal-it Industrial Concrete Sealer is a premium quality, high gloss, solvent-based, urethane sealer that provides anti-dusting, maximum stain resistance and surface protection and ease of cleaning.

Designed for all types of industrial concrete floors.

Can also be used on commercial and domestic concrete floors where maximum surface protection and stain resistance are required. Only use on unpigmented concrete.

Expected wear - up to 10 years, depending on texture, hardness of surface, traffic, maintenance and use of aggressive cleaners.

For interior use on natural concrete only.

Available in a 5 litre pack

Polish-it Polish and Protect Matt is a high quality polymer polish for regular maintenance. Provides a protective matt surface finish.

Provides the best results when applied to already sealed natural stone, marble, travertine, limestone, slate, terracotta, unglazed ceramics, cement- and vinyl tiles.

Can be used as a pre-sealer prior to grouting on polished porcelain and textured ceramic tiles.

Not recommended as a finishing sealer over glazed ceramics and porcelain tiles.

Expected wear - up to 1 year depending on the number of coats, traffic, area, maintenance method, and use of aggressive cleaners.

Available in 1 and 5 litre packs For interior use only.

Protect-it Marble Granite Travertine is a superior quality, natural look, no sheen, no surface film, solvent-based penetrating water- and oil repellent. Allows water vapour transmission.

Suitable for use on low porosity tiles including polished, honed, tumbled and natural marble, travertine, granite, limestone and other natural stone.

Expected wear - up to 15 years, depending on texture, hardness of surface, traffic, maintenance and use of aggressive cleaners.

For interior and exterior use.

Seal-it Polyurethane Sealer is a non-yellowing, penetrating, solvent based, twin-pack polyurethane sealer that provides excellent stain and surface protection. Colour enhances and provides a satin sheen finish.

Suitable for use on low to medium porosity tiles including slate, terracotta, unglazed ceramics and quartzite, honed, natural and tumbled marble and travertine, flamed granite and split tiles.

Expected wear - up to 7 years, depending on texture, hardness of surface, area, traffic, maintenance, weather and use of aggressive cleaners.

For interior use only.

Available in 1 and 5 litre packs

Available in 1 and 5 litre twin-packs

Protect-it Natural Look is an economical solvent-based, natural look, no sheen, no surface film, water repellent for general stain protection. Also suitable for use as a grout sealer. Allows water vapour transmission.

Suitable for use on low porosity natural stone tiles including marble, travertine, granite, porcelain, limestone, quartzite, cement pavers, masonry surfaces, low porosity terracotta, quarry tiles, vitrified and unglazed ceramics.

Expected wear - up to 5 years, depending on texture, hardness of surface, traffic, maintenance and use of aggressive cleaners.

For interior and exterior use.

Seal-it Premium Sealer is a non-yellowing, high-solids solvent based, twin-pack urethane sealer that provides excellent stain and abrasion resistance.

Suitable for use on high porosity tiles including terracotta, slate, split tiles, cement tiles, concrete floors, natural stone- and quarry tiles.

Expected wear - up to 5 years, depending on texture, hardness of surface, area, traffic, maintenance, weather and use of aggressive cleaners.

For interior use only.

Available in 1, 5 and 25 litre packs

Polish-it Polish and Shine is a high quality self-shine polymer polish for regular maintenance. Provides a protective high-shine surface finish.

Provides the best results when applied to already sealed natural stone, marble, travertine, limestone, slate, terracotta, unglazed ceramics, cement- and vinyl tiles.

Can be used as a pre-sealer prior to grouting on polished porcelain and textured ceramic tiles.

Not recommended as a finishing sealer over glazed ceramics and porcelain tiles.

Expected wear - up to 1 year depending on the number of coats, traffic, area, maintenance method, and use of aggressive cleaners.

For interior use only.

Available in 1 and 5 litre packs

Available in 1 and 5 litre packs

Available in a 5 litre twin-pack

Clean-it Heavy Duty Cleaner is a concentrated heavy-duty degreasing cleaner and acid neutralizer for use in high traffic areas.

Suitable for use on natural stone, marble, granite, travertine, limestone, slate, terrazzo, terracotta, bricks, cement tiles, concrete floors, glazed and unglazed ceramics.

Clean-it Heavy Duty Cleaner cannot remove grout and cement residue or calcium deposits. Clean-it Grout Residue Remover is specifically formulated to remove grout- and cement residue, calcium deposits and lime and is recommended for this purpose.

For interior and exterior use.

Strip-it Ultra Strip is a solvent-based multi-purpose stripper for the removal of most sealers, adhesives, varnishes and paint. Specifically formulated for easy water clean-up.

Suitable for use on natural stone, marble, granite, slate, terrazzo, bricks, glazed- and unglazed ceramics.

Suitable for use on most floor finishes.

Not suitable for use on resin-based synthetic surfaces including vinyl tiles, reconstituted marble and epoxy terrazzo.

For interior and exterior use.

Protect-it Porcelain Tiles is a superior quality, natural look, no sheen, solvent-based penetrating silicone water repellent for general stain protection. Allows water vapour transmission.

Suitable for use on polished- and unpolished porcelain, vitrified- and unglazed ceramics and other low porosity polished natural stone.

Expected wear - up to 5 years, depending on texture, hardness of surface, traffic, maintenance and use of aggressive cleaners.

For interior and exterior use.

Seal-it Sandstone Tiles is a superior quality, natural look, non-yellowing, water-based resin sealer. Provides a protective surface sheen, good stain resistance and ease of cleaning.

Suitable for use on natural-, tumbled- and honed sandstone, limestone and similar natural stone.

Expected wear - up to 5 years,depending on texture, hardness of surface, area, traffic, maintenance, weather and use of aggressive cleaners.

For interior and exterior use.

Available in 1, 5 and 25 litre packs

Available in 1 and 5 litre packs

Available in 1 and 5 litre packs

Available in a 5 litre pack

Clean-it Mould Remover is a fast-acting cleaner for the removal of mould, mildew, black stains and algae.

Suitable for interior use on ceramic, porcelain- and enamel surfaces, tiles and tile grout in bathrooms and showers.

Suitable for exterior use on bricks, walls, paving, floor- and roof tiles.

For interior and exterior use.

Strip-it Wax Remover is a concentrated water based non-ammoniated stripper for the removal of waxes and polishes.

Suitable for use on natural stone, marble, granite, travertine, limestone, slate, terrazzo, terracotta, bricks, cement tiles, glazed- and unglazed ceramics, vinyl- and plastic floor tiles.

For interior and exterior use.

Available in 500ml and 5 litre packs

Available in 1 and 5 litre packs

Protect-it Wall Cladding is a superior quality, natural look, no sheen, no surface film, solvent-based penetrating water repellent. Provides protection against rain, moisture, general airborne dirt, pollution, mould and mildew. Allows water vapour transmission.

Suitable for use on most natural stone such as marble, granite and sandstone, cast stone, porcelain, terracotta, clay, cement- and concrete bricks and -blocks and masonry surfaces. Can also be used as a primer for silicone paints, emulsion paints and resin plasters.

Expected wear up to 15 years on vertical surfaces, depending on weather conditions, pollution, cleaning and maintenance methods.

For interior and exterior use.

Available in 1 and 5 litre packs

Seal-it Stone Seal is a premium quality, non-yellowing solvent-based resin sealer that provides a satin finish. A penetrating sealer that colour enhances and provides a “wet look� finish.

Suitable for use on low, medium and high porosity tiles, including terracotta, slate, slasto, sandstone, cement tiles and -pavers, coloured granolithic floors, terrazzo, natural stone and quarry tiles.

Not suitable for use on polished stone, glazed ceramic- and porcelain tiles.

Expected wear - up to 5 years, depending on texture, hardness of surface, traffic, maintenance and use of aggressive cleaners.

Available in 1, 5 and 25 litre packs For interior and exterior use.

Clean-it Grout Cleaner is a ready to use non-acidic cleaner for regular use on grout joints.

Suitable for use on all grout joints.

Removes grease, grime, soap deposits and general dirt.

Eliminates soap build-up and reduces hard water deposits.

For interior and exterior use.

Available in 500ml and 1 litre packs

Clean-it Grout Residue Remover is an inhibited acid-based cleaner for the removal of cement and grout residue.

Suitable for use on natural stone, slate, terracotta, bricks, porcelain, and glazed- and unglazed ceramics.

Not for use on marble, travertine, limestone, cement tiles and pavers or terrazzo.

For interior and exterior use.